Vulkan-Docs/config/mathtest.txt

948 lines
25 KiB
Plaintext
Raw Normal View History

Change log for January 23, 2017 Vulkan 1.0.39 spec update: * Bump API patch number and header version number to 39 for this update. Github Issues: * Clarified that only accesses via the specified buffer/image subresource ranges are included in the access scopes (public issue 306). * Add missing valid usage statements for flink:vkCreateComputePipelines and flink:vkCreateGraphicsPipelines (public issue 427). Internal Issues: * Add a Note to the <<invariance,Invariance>> appendix about a difference between OpenGL and Vulkan with regards to how primitives derived from offsets are handled (internal issue 355). * Add the +<<VK_KHR_get_physical_device_properties2>>+, +<<VK_KHR_maintenance1>>+, and +<<VK_KHR_shader_draw_parameters>>+ extensions (internal issue 448). * Add the +<<VK_EXT_shader_subgroup_vote>>+ and +<<VK_EXT_shader_subgroup_ballot>>+ extensions (internal issue 449). * Update the texture level-of-detail equation in the <<textures-scale-factor,Scale Factor Operation>> section to better approximate the ellipse major and minor axes (internal issue 547). * Forbid non-explicitly allowed uses of interface decorations in the introduction to the <<interfaces,Shader Interfaces>> chapter (internal issue 607). * Replace use of MathJax with KaTeX, for improved load-time performance as well as avoiding the scrolling-and-scrolling behavior due to MathJax asynchronous rendering when loading at an anchor inside the spec. This change also requires moving to HTML5 output for the spec instead of XHTML, and there is a visible difference in that the chapter navigation index is now in a scrollable sidebar instead of at the top of the document. We may or may not retain the nav sidebar based on feedback (internal issue 613). * Improve consistency of markup and formatting in extension appendices (internal issue 631). Other Issues: * Add explicit valid usage statements to slink:VkImageCopy requiring that the source and destination layer ranges be contained in their respective source and destination images. * Add valid usage language for swapchain of flink:vkAcquireNextImage. If the swapchain has been replaced, then it should not be passed to flink:vkAcquireNextImage. * Add a valid usage statement to flink:vkCreateImageView, that the image must have been created with an appropriate usage bit set. * Noted that slink:VkDisplayPresentInfoKHR is a valid extension of slink:VkPresentInfoKHR in the <<wsi_swapchain,WSI Swapchain>> section. * Update valid usage for flink:vkCmdSetViewport and flink:vkCmdSetScissor to account for the multiple viewport feature. If the feature is not enabled, the parameters for these functions have required values that are defined in the <<features-features-multiViewport,multiple viewports>> section of the spec but were not reflected in the valid usage text for these functions. * Add the +<<VK_EXT_swapchain_colorspace>>+ extension defining common color spaces.
2017-01-18 04:11:25 +00:00
= Math Test
This file (vkmath.txt) contains all the latexmath blocks and inlines in the
Vulkan spec and style guide, so we can see how they're rendered with
different methods and output formats.
== File chapters/fundamentals.txt
=== latexmath block 1
[latexmath]
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Change log for February 10, 2017 Vulkan 1.0.40 spec update: * Bump API patch number and header version number to 40 for this update. * There is a major build change in this release. We are now using the Ruby-based ``asciidoctor'' implementation, rather than the Python-based ``asciidoc'' implementation, to process the specification. While the actual specification markup changes were minimal, this requires a new set of build tools and a very different installation process, especially because we now use an experimental direct-to-PDF backend for Asciidoctor instead of Docbook->dblatex->PDF. It is no longer possible to build the Specification using asciidoc. See doc/specs/vulkan/README.adoc for some guidance on installing the new toolchain components. * There are some minor rendering issues in the PDF output due to teething problems with the asciidoctor toolchain, especially with mathematical equations. We are aware of these and working on them. Github Issues: * Updated sample code for the <<sparsememory-examples-basic,sparse resource binding example>> (public issue 97). * Modify line and point clipping behavior in the <<vertexpostproc-clipping, Primitive Clipping>> section to allow for pop-free behavior. The ability to check for which behavior is implemented may be added a future feature or extension (public issue 113). * Unify the discussions of implicit ordering throughout the spec, in particular in the new sections <<drawing-primitive-order, Primitive Order>>, <<primrast-order, Rasterization Order>>, and <<synchronization-implicit, Implicit Synchronization Guarantees>>; the discussion of <<synchronization-submission-order, submission order>>; and references elsewhere to these sections (public issue 133). * Clarify \<\<descriptorsets-compatibility,Pipeline Layout Compatibility>> language and introduce the term ``identically defined'' (public issue 164). * Add a dependency to the +VK_EXT_debug_marker+ extension that's needed to reuse the object type enum from +VK_EXT_debug_report+, and moves the definition of that enum into +VK_EXT_debug_report+ where it should be (public issue 409). * Remove redundant valid usage statement from slink:VkImageBlit (public issue 421). * Update GL_KHR_vulkan_glsl to allow the ternary operator to result in a specialization constant (public issue 424). * Fix valid usage for flink:VkPipelineShaderStageCreateInfo (public issue 426). * Correct typo in New Objects list for <<VK_EXT_debug_report>> (public issue 447). Internal Issues: * Moved to asciidoctor for spec builds (internal issue 121). * Update style guide to describe where to put new extensions-specific asciidoc files, and what to name them (internal issue 626). * Add src/spec/indexExt.py to autogenerate registry index entries linking into the 1.0-extensions specification, instead of maintaining the index manually. (internal issue 642). * Autogenerate extension dependencies and lists of all extensions and all KHR extensions from the "supported" attributes in +vk.xml+. Execute +make config/extDependency.sh+ from +doc/specs/vulkan+ when a supported extension is added to vk.xml, to regenerate the dependency script. The consequence is that specifying a single extension to the +makeExt+ script will automatically enable all extensions it depends on as well, and that the +makeAllExts+ and +makeKHR+ scripts do not need to be updated when a new extension is supported (internal issue 648). * Put extension appendices all at the same asciidoc section level, so KHR WSI extensions show up in the HTML index (internal issue 648). Other Issues: * Imbed images in the generated HTML specs instead of loading them from the images/ directory. * Fix missing EXT in extension name (ename:VK_EXT_SWAPCHAIN_COLOR_SPACE_EXTENSION_NAME). * Add new +VK_EXT_SMPTE_2086_metadata+ extension. * In the <<platformCreateSurface_xlib,Xlib Surface>> section of the +VK_KHR_xlib_surface+ specification, add language warning users that they always need to call code:XinitThreads. * Use the term "presentable image" (rather than "swapchain image") consistently in +VK_KHR_swapchain+ and related extensions, and add a glossary term defining it. * Relocate the valid usage for samples of flink:vkGetPhysicalDeviceSparseImageFormatProperties2KHR::pname:pFormatInfo to be below the flink:VkPhysicalDeviceSparseImageFormatInfo2KHR structure.
2017-02-11 04:37:39 +00:00
f = { c \over { 2^b - 1 } }
Change log for January 23, 2017 Vulkan 1.0.39 spec update: * Bump API patch number and header version number to 39 for this update. Github Issues: * Clarified that only accesses via the specified buffer/image subresource ranges are included in the access scopes (public issue 306). * Add missing valid usage statements for flink:vkCreateComputePipelines and flink:vkCreateGraphicsPipelines (public issue 427). Internal Issues: * Add a Note to the <<invariance,Invariance>> appendix about a difference between OpenGL and Vulkan with regards to how primitives derived from offsets are handled (internal issue 355). * Add the +<<VK_KHR_get_physical_device_properties2>>+, +<<VK_KHR_maintenance1>>+, and +<<VK_KHR_shader_draw_parameters>>+ extensions (internal issue 448). * Add the +<<VK_EXT_shader_subgroup_vote>>+ and +<<VK_EXT_shader_subgroup_ballot>>+ extensions (internal issue 449). * Update the texture level-of-detail equation in the <<textures-scale-factor,Scale Factor Operation>> section to better approximate the ellipse major and minor axes (internal issue 547). * Forbid non-explicitly allowed uses of interface decorations in the introduction to the <<interfaces,Shader Interfaces>> chapter (internal issue 607). * Replace use of MathJax with KaTeX, for improved load-time performance as well as avoiding the scrolling-and-scrolling behavior due to MathJax asynchronous rendering when loading at an anchor inside the spec. This change also requires moving to HTML5 output for the spec instead of XHTML, and there is a visible difference in that the chapter navigation index is now in a scrollable sidebar instead of at the top of the document. We may or may not retain the nav sidebar based on feedback (internal issue 613). * Improve consistency of markup and formatting in extension appendices (internal issue 631). Other Issues: * Add explicit valid usage statements to slink:VkImageCopy requiring that the source and destination layer ranges be contained in their respective source and destination images. * Add valid usage language for swapchain of flink:vkAcquireNextImage. If the swapchain has been replaced, then it should not be passed to flink:vkAcquireNextImage. * Add a valid usage statement to flink:vkCreateImageView, that the image must have been created with an appropriate usage bit set. * Noted that slink:VkDisplayPresentInfoKHR is a valid extension of slink:VkPresentInfoKHR in the <<wsi_swapchain,WSI Swapchain>> section. * Update valid usage for flink:vkCmdSetViewport and flink:vkCmdSetScissor to account for the multiple viewport feature. If the feature is not enabled, the parameters for these functions have required values that are defined in the <<features-features-multiViewport,multiple viewports>> section of the spec but were not reflected in the valid usage text for these functions. * Add the +<<VK_EXT_swapchain_colorspace>>+ extension defining common color spaces.
2017-01-18 04:11:25 +00:00
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
=== latexmath block 2
[latexmath]
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Change log for February 10, 2017 Vulkan 1.0.40 spec update: * Bump API patch number and header version number to 40 for this update. * There is a major build change in this release. We are now using the Ruby-based ``asciidoctor'' implementation, rather than the Python-based ``asciidoc'' implementation, to process the specification. While the actual specification markup changes were minimal, this requires a new set of build tools and a very different installation process, especially because we now use an experimental direct-to-PDF backend for Asciidoctor instead of Docbook->dblatex->PDF. It is no longer possible to build the Specification using asciidoc. See doc/specs/vulkan/README.adoc for some guidance on installing the new toolchain components. * There are some minor rendering issues in the PDF output due to teething problems with the asciidoctor toolchain, especially with mathematical equations. We are aware of these and working on them. Github Issues: * Updated sample code for the <<sparsememory-examples-basic,sparse resource binding example>> (public issue 97). * Modify line and point clipping behavior in the <<vertexpostproc-clipping, Primitive Clipping>> section to allow for pop-free behavior. The ability to check for which behavior is implemented may be added a future feature or extension (public issue 113). * Unify the discussions of implicit ordering throughout the spec, in particular in the new sections <<drawing-primitive-order, Primitive Order>>, <<primrast-order, Rasterization Order>>, and <<synchronization-implicit, Implicit Synchronization Guarantees>>; the discussion of <<synchronization-submission-order, submission order>>; and references elsewhere to these sections (public issue 133). * Clarify \<\<descriptorsets-compatibility,Pipeline Layout Compatibility>> language and introduce the term ``identically defined'' (public issue 164). * Add a dependency to the +VK_EXT_debug_marker+ extension that's needed to reuse the object type enum from +VK_EXT_debug_report+, and moves the definition of that enum into +VK_EXT_debug_report+ where it should be (public issue 409). * Remove redundant valid usage statement from slink:VkImageBlit (public issue 421). * Update GL_KHR_vulkan_glsl to allow the ternary operator to result in a specialization constant (public issue 424). * Fix valid usage for flink:VkPipelineShaderStageCreateInfo (public issue 426). * Correct typo in New Objects list for <<VK_EXT_debug_report>> (public issue 447). Internal Issues: * Moved to asciidoctor for spec builds (internal issue 121). * Update style guide to describe where to put new extensions-specific asciidoc files, and what to name them (internal issue 626). * Add src/spec/indexExt.py to autogenerate registry index entries linking into the 1.0-extensions specification, instead of maintaining the index manually. (internal issue 642). * Autogenerate extension dependencies and lists of all extensions and all KHR extensions from the "supported" attributes in +vk.xml+. Execute +make config/extDependency.sh+ from +doc/specs/vulkan+ when a supported extension is added to vk.xml, to regenerate the dependency script. The consequence is that specifying a single extension to the +makeExt+ script will automatically enable all extensions it depends on as well, and that the +makeAllExts+ and +makeKHR+ scripts do not need to be updated when a new extension is supported (internal issue 648). * Put extension appendices all at the same asciidoc section level, so KHR WSI extensions show up in the HTML index (internal issue 648). Other Issues: * Imbed images in the generated HTML specs instead of loading them from the images/ directory. * Fix missing EXT in extension name (ename:VK_EXT_SWAPCHAIN_COLOR_SPACE_EXTENSION_NAME). * Add new +VK_EXT_SMPTE_2086_metadata+ extension. * In the <<platformCreateSurface_xlib,Xlib Surface>> section of the +VK_KHR_xlib_surface+ specification, add language warning users that they always need to call code:XinitThreads. * Use the term "presentable image" (rather than "swapchain image") consistently in +VK_KHR_swapchain+ and related extensions, and add a glossary term defining it. * Relocate the valid usage for samples of flink:vkGetPhysicalDeviceSparseImageFormatProperties2KHR::pname:pFormatInfo to be below the flink:VkPhysicalDeviceSparseImageFormatInfo2KHR structure.
2017-02-11 04:37:39 +00:00
f = \max\left( {c \over {2^{b-1} - 1}}, -1.0 \right)
Change log for January 23, 2017 Vulkan 1.0.39 spec update: * Bump API patch number and header version number to 39 for this update. Github Issues: * Clarified that only accesses via the specified buffer/image subresource ranges are included in the access scopes (public issue 306). * Add missing valid usage statements for flink:vkCreateComputePipelines and flink:vkCreateGraphicsPipelines (public issue 427). Internal Issues: * Add a Note to the <<invariance,Invariance>> appendix about a difference between OpenGL and Vulkan with regards to how primitives derived from offsets are handled (internal issue 355). * Add the +<<VK_KHR_get_physical_device_properties2>>+, +<<VK_KHR_maintenance1>>+, and +<<VK_KHR_shader_draw_parameters>>+ extensions (internal issue 448). * Add the +<<VK_EXT_shader_subgroup_vote>>+ and +<<VK_EXT_shader_subgroup_ballot>>+ extensions (internal issue 449). * Update the texture level-of-detail equation in the <<textures-scale-factor,Scale Factor Operation>> section to better approximate the ellipse major and minor axes (internal issue 547). * Forbid non-explicitly allowed uses of interface decorations in the introduction to the <<interfaces,Shader Interfaces>> chapter (internal issue 607). * Replace use of MathJax with KaTeX, for improved load-time performance as well as avoiding the scrolling-and-scrolling behavior due to MathJax asynchronous rendering when loading at an anchor inside the spec. This change also requires moving to HTML5 output for the spec instead of XHTML, and there is a visible difference in that the chapter navigation index is now in a scrollable sidebar instead of at the top of the document. We may or may not retain the nav sidebar based on feedback (internal issue 613). * Improve consistency of markup and formatting in extension appendices (internal issue 631). Other Issues: * Add explicit valid usage statements to slink:VkImageCopy requiring that the source and destination layer ranges be contained in their respective source and destination images. * Add valid usage language for swapchain of flink:vkAcquireNextImage. If the swapchain has been replaced, then it should not be passed to flink:vkAcquireNextImage. * Add a valid usage statement to flink:vkCreateImageView, that the image must have been created with an appropriate usage bit set. * Noted that slink:VkDisplayPresentInfoKHR is a valid extension of slink:VkPresentInfoKHR in the <<wsi_swapchain,WSI Swapchain>> section. * Update valid usage for flink:vkCmdSetViewport and flink:vkCmdSetScissor to account for the multiple viewport feature. If the feature is not enabled, the parameters for these functions have required values that are defined in the <<features-features-multiViewport,multiple viewports>> section of the spec but were not reflected in the valid usage text for these functions. * Add the +<<VK_EXT_swapchain_colorspace>>+ extension defining common color spaces.
2017-01-18 04:11:25 +00:00
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
== File chapters/interfaces.txt
=== latexmath inline 1
Change log for February 10, 2017 Vulkan 1.0.40 spec update: * Bump API patch number and header version number to 40 for this update. * There is a major build change in this release. We are now using the Ruby-based ``asciidoctor'' implementation, rather than the Python-based ``asciidoc'' implementation, to process the specification. While the actual specification markup changes were minimal, this requires a new set of build tools and a very different installation process, especially because we now use an experimental direct-to-PDF backend for Asciidoctor instead of Docbook->dblatex->PDF. It is no longer possible to build the Specification using asciidoc. See doc/specs/vulkan/README.adoc for some guidance on installing the new toolchain components. * There are some minor rendering issues in the PDF output due to teething problems with the asciidoctor toolchain, especially with mathematical equations. We are aware of these and working on them. Github Issues: * Updated sample code for the <<sparsememory-examples-basic,sparse resource binding example>> (public issue 97). * Modify line and point clipping behavior in the <<vertexpostproc-clipping, Primitive Clipping>> section to allow for pop-free behavior. The ability to check for which behavior is implemented may be added a future feature or extension (public issue 113). * Unify the discussions of implicit ordering throughout the spec, in particular in the new sections <<drawing-primitive-order, Primitive Order>>, <<primrast-order, Rasterization Order>>, and <<synchronization-implicit, Implicit Synchronization Guarantees>>; the discussion of <<synchronization-submission-order, submission order>>; and references elsewhere to these sections (public issue 133). * Clarify \<\<descriptorsets-compatibility,Pipeline Layout Compatibility>> language and introduce the term ``identically defined'' (public issue 164). * Add a dependency to the +VK_EXT_debug_marker+ extension that's needed to reuse the object type enum from +VK_EXT_debug_report+, and moves the definition of that enum into +VK_EXT_debug_report+ where it should be (public issue 409). * Remove redundant valid usage statement from slink:VkImageBlit (public issue 421). * Update GL_KHR_vulkan_glsl to allow the ternary operator to result in a specialization constant (public issue 424). * Fix valid usage for flink:VkPipelineShaderStageCreateInfo (public issue 426). * Correct typo in New Objects list for <<VK_EXT_debug_report>> (public issue 447). Internal Issues: * Moved to asciidoctor for spec builds (internal issue 121). * Update style guide to describe where to put new extensions-specific asciidoc files, and what to name them (internal issue 626). * Add src/spec/indexExt.py to autogenerate registry index entries linking into the 1.0-extensions specification, instead of maintaining the index manually. (internal issue 642). * Autogenerate extension dependencies and lists of all extensions and all KHR extensions from the "supported" attributes in +vk.xml+. Execute +make config/extDependency.sh+ from +doc/specs/vulkan+ when a supported extension is added to vk.xml, to regenerate the dependency script. The consequence is that specifying a single extension to the +makeExt+ script will automatically enable all extensions it depends on as well, and that the +makeAllExts+ and +makeKHR+ scripts do not need to be updated when a new extension is supported (internal issue 648). * Put extension appendices all at the same asciidoc section level, so KHR WSI extensions show up in the HTML index (internal issue 648). Other Issues: * Imbed images in the generated HTML specs instead of loading them from the images/ directory. * Fix missing EXT in extension name (ename:VK_EXT_SWAPCHAIN_COLOR_SPACE_EXTENSION_NAME). * Add new +VK_EXT_SMPTE_2086_metadata+ extension. * In the <<platformCreateSurface_xlib,Xlib Surface>> section of the +VK_KHR_xlib_surface+ specification, add language warning users that they always need to call code:XinitThreads. * Use the term "presentable image" (rather than "swapchain image") consistently in +VK_KHR_swapchain+ and related extensions, and add a glossary term defining it. * Relocate the valid usage for samples of flink:vkGetPhysicalDeviceSparseImageFormatProperties2KHR::pname:pFormatInfo to be below the flink:VkPhysicalDeviceSparseImageFormatInfo2KHR structure.
2017-02-11 04:37:39 +00:00
latexmath:[(x,y,z,\frac{1}{w})]
Change log for January 23, 2017 Vulkan 1.0.39 spec update: * Bump API patch number and header version number to 39 for this update. Github Issues: * Clarified that only accesses via the specified buffer/image subresource ranges are included in the access scopes (public issue 306). * Add missing valid usage statements for flink:vkCreateComputePipelines and flink:vkCreateGraphicsPipelines (public issue 427). Internal Issues: * Add a Note to the <<invariance,Invariance>> appendix about a difference between OpenGL and Vulkan with regards to how primitives derived from offsets are handled (internal issue 355). * Add the +<<VK_KHR_get_physical_device_properties2>>+, +<<VK_KHR_maintenance1>>+, and +<<VK_KHR_shader_draw_parameters>>+ extensions (internal issue 448). * Add the +<<VK_EXT_shader_subgroup_vote>>+ and +<<VK_EXT_shader_subgroup_ballot>>+ extensions (internal issue 449). * Update the texture level-of-detail equation in the <<textures-scale-factor,Scale Factor Operation>> section to better approximate the ellipse major and minor axes (internal issue 547). * Forbid non-explicitly allowed uses of interface decorations in the introduction to the <<interfaces,Shader Interfaces>> chapter (internal issue 607). * Replace use of MathJax with KaTeX, for improved load-time performance as well as avoiding the scrolling-and-scrolling behavior due to MathJax asynchronous rendering when loading at an anchor inside the spec. This change also requires moving to HTML5 output for the spec instead of XHTML, and there is a visible difference in that the chapter navigation index is now in a scrollable sidebar instead of at the top of the document. We may or may not retain the nav sidebar based on feedback (internal issue 613). * Improve consistency of markup and formatting in extension appendices (internal issue 631). Other Issues: * Add explicit valid usage statements to slink:VkImageCopy requiring that the source and destination layer ranges be contained in their respective source and destination images. * Add valid usage language for swapchain of flink:vkAcquireNextImage. If the swapchain has been replaced, then it should not be passed to flink:vkAcquireNextImage. * Add a valid usage statement to flink:vkCreateImageView, that the image must have been created with an appropriate usage bit set. * Noted that slink:VkDisplayPresentInfoKHR is a valid extension of slink:VkPresentInfoKHR in the <<wsi_swapchain,WSI Swapchain>> section. * Update valid usage for flink:vkCmdSetViewport and flink:vkCmdSetScissor to account for the multiple viewport feature. If the feature is not enabled, the parameters for these functions have required values that are defined in the <<features-features-multiViewport,multiple viewports>> section of the spec but were not reflected in the valid usage text for these functions. * Add the +<<VK_EXT_swapchain_colorspace>>+ extension defining common color spaces.
2017-01-18 04:11:25 +00:00
=== latexmath inline 2
Change log for February 10, 2017 Vulkan 1.0.40 spec update: * Bump API patch number and header version number to 40 for this update. * There is a major build change in this release. We are now using the Ruby-based ``asciidoctor'' implementation, rather than the Python-based ``asciidoc'' implementation, to process the specification. While the actual specification markup changes were minimal, this requires a new set of build tools and a very different installation process, especially because we now use an experimental direct-to-PDF backend for Asciidoctor instead of Docbook->dblatex->PDF. It is no longer possible to build the Specification using asciidoc. See doc/specs/vulkan/README.adoc for some guidance on installing the new toolchain components. * There are some minor rendering issues in the PDF output due to teething problems with the asciidoctor toolchain, especially with mathematical equations. We are aware of these and working on them. Github Issues: * Updated sample code for the <<sparsememory-examples-basic,sparse resource binding example>> (public issue 97). * Modify line and point clipping behavior in the <<vertexpostproc-clipping, Primitive Clipping>> section to allow for pop-free behavior. The ability to check for which behavior is implemented may be added a future feature or extension (public issue 113). * Unify the discussions of implicit ordering throughout the spec, in particular in the new sections <<drawing-primitive-order, Primitive Order>>, <<primrast-order, Rasterization Order>>, and <<synchronization-implicit, Implicit Synchronization Guarantees>>; the discussion of <<synchronization-submission-order, submission order>>; and references elsewhere to these sections (public issue 133). * Clarify \<\<descriptorsets-compatibility,Pipeline Layout Compatibility>> language and introduce the term ``identically defined'' (public issue 164). * Add a dependency to the +VK_EXT_debug_marker+ extension that's needed to reuse the object type enum from +VK_EXT_debug_report+, and moves the definition of that enum into +VK_EXT_debug_report+ where it should be (public issue 409). * Remove redundant valid usage statement from slink:VkImageBlit (public issue 421). * Update GL_KHR_vulkan_glsl to allow the ternary operator to result in a specialization constant (public issue 424). * Fix valid usage for flink:VkPipelineShaderStageCreateInfo (public issue 426). * Correct typo in New Objects list for <<VK_EXT_debug_report>> (public issue 447). Internal Issues: * Moved to asciidoctor for spec builds (internal issue 121). * Update style guide to describe where to put new extensions-specific asciidoc files, and what to name them (internal issue 626). * Add src/spec/indexExt.py to autogenerate registry index entries linking into the 1.0-extensions specification, instead of maintaining the index manually. (internal issue 642). * Autogenerate extension dependencies and lists of all extensions and all KHR extensions from the "supported" attributes in +vk.xml+. Execute +make config/extDependency.sh+ from +doc/specs/vulkan+ when a supported extension is added to vk.xml, to regenerate the dependency script. The consequence is that specifying a single extension to the +makeExt+ script will automatically enable all extensions it depends on as well, and that the +makeAllExts+ and +makeKHR+ scripts do not need to be updated when a new extension is supported (internal issue 648). * Put extension appendices all at the same asciidoc section level, so KHR WSI extensions show up in the HTML index (internal issue 648). Other Issues: * Imbed images in the generated HTML specs instead of loading them from the images/ directory. * Fix missing EXT in extension name (ename:VK_EXT_SWAPCHAIN_COLOR_SPACE_EXTENSION_NAME). * Add new +VK_EXT_SMPTE_2086_metadata+ extension. * In the <<platformCreateSurface_xlib,Xlib Surface>> section of the +VK_KHR_xlib_surface+ specification, add language warning users that they always need to call code:XinitThreads. * Use the term "presentable image" (rather than "swapchain image") consistently in +VK_KHR_swapchain+ and related extensions, and add a glossary term defining it. * Relocate the valid usage for samples of flink:vkGetPhysicalDeviceSparseImageFormatProperties2KHR::pname:pFormatInfo to be below the flink:VkPhysicalDeviceSparseImageFormatInfo2KHR structure.
2017-02-11 04:37:39 +00:00
latexmath:[\frac{1}{w}]
Change log for January 23, 2017 Vulkan 1.0.39 spec update: * Bump API patch number and header version number to 39 for this update. Github Issues: * Clarified that only accesses via the specified buffer/image subresource ranges are included in the access scopes (public issue 306). * Add missing valid usage statements for flink:vkCreateComputePipelines and flink:vkCreateGraphicsPipelines (public issue 427). Internal Issues: * Add a Note to the <<invariance,Invariance>> appendix about a difference between OpenGL and Vulkan with regards to how primitives derived from offsets are handled (internal issue 355). * Add the +<<VK_KHR_get_physical_device_properties2>>+, +<<VK_KHR_maintenance1>>+, and +<<VK_KHR_shader_draw_parameters>>+ extensions (internal issue 448). * Add the +<<VK_EXT_shader_subgroup_vote>>+ and +<<VK_EXT_shader_subgroup_ballot>>+ extensions (internal issue 449). * Update the texture level-of-detail equation in the <<textures-scale-factor,Scale Factor Operation>> section to better approximate the ellipse major and minor axes (internal issue 547). * Forbid non-explicitly allowed uses of interface decorations in the introduction to the <<interfaces,Shader Interfaces>> chapter (internal issue 607). * Replace use of MathJax with KaTeX, for improved load-time performance as well as avoiding the scrolling-and-scrolling behavior due to MathJax asynchronous rendering when loading at an anchor inside the spec. This change also requires moving to HTML5 output for the spec instead of XHTML, and there is a visible difference in that the chapter navigation index is now in a scrollable sidebar instead of at the top of the document. We may or may not retain the nav sidebar based on feedback (internal issue 613). * Improve consistency of markup and formatting in extension appendices (internal issue 631). Other Issues: * Add explicit valid usage statements to slink:VkImageCopy requiring that the source and destination layer ranges be contained in their respective source and destination images. * Add valid usage language for swapchain of flink:vkAcquireNextImage. If the swapchain has been replaced, then it should not be passed to flink:vkAcquireNextImage. * Add a valid usage statement to flink:vkCreateImageView, that the image must have been created with an appropriate usage bit set. * Noted that slink:VkDisplayPresentInfoKHR is a valid extension of slink:VkPresentInfoKHR in the <<wsi_swapchain,WSI Swapchain>> section. * Update valid usage for flink:vkCmdSetViewport and flink:vkCmdSetScissor to account for the multiple viewport feature. If the feature is not enabled, the parameters for these functions have required values that are defined in the <<features-features-multiViewport,multiple viewports>> section of the spec but were not reflected in the valid usage text for these functions. * Add the +<<VK_EXT_swapchain_colorspace>>+ extension defining common color spaces.
2017-01-18 04:11:25 +00:00
== File chapters/primsrast.txt
=== latexmath block 3
[latexmath]
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Change log for February 10, 2017 Vulkan 1.0.40 spec update: * Bump API patch number and header version number to 40 for this update. * There is a major build change in this release. We are now using the Ruby-based ``asciidoctor'' implementation, rather than the Python-based ``asciidoc'' implementation, to process the specification. While the actual specification markup changes were minimal, this requires a new set of build tools and a very different installation process, especially because we now use an experimental direct-to-PDF backend for Asciidoctor instead of Docbook->dblatex->PDF. It is no longer possible to build the Specification using asciidoc. See doc/specs/vulkan/README.adoc for some guidance on installing the new toolchain components. * There are some minor rendering issues in the PDF output due to teething problems with the asciidoctor toolchain, especially with mathematical equations. We are aware of these and working on them. Github Issues: * Updated sample code for the <<sparsememory-examples-basic,sparse resource binding example>> (public issue 97). * Modify line and point clipping behavior in the <<vertexpostproc-clipping, Primitive Clipping>> section to allow for pop-free behavior. The ability to check for which behavior is implemented may be added a future feature or extension (public issue 113). * Unify the discussions of implicit ordering throughout the spec, in particular in the new sections <<drawing-primitive-order, Primitive Order>>, <<primrast-order, Rasterization Order>>, and <<synchronization-implicit, Implicit Synchronization Guarantees>>; the discussion of <<synchronization-submission-order, submission order>>; and references elsewhere to these sections (public issue 133). * Clarify \<\<descriptorsets-compatibility,Pipeline Layout Compatibility>> language and introduce the term ``identically defined'' (public issue 164). * Add a dependency to the +VK_EXT_debug_marker+ extension that's needed to reuse the object type enum from +VK_EXT_debug_report+, and moves the definition of that enum into +VK_EXT_debug_report+ where it should be (public issue 409). * Remove redundant valid usage statement from slink:VkImageBlit (public issue 421). * Update GL_KHR_vulkan_glsl to allow the ternary operator to result in a specialization constant (public issue 424). * Fix valid usage for flink:VkPipelineShaderStageCreateInfo (public issue 426). * Correct typo in New Objects list for <<VK_EXT_debug_report>> (public issue 447). Internal Issues: * Moved to asciidoctor for spec builds (internal issue 121). * Update style guide to describe where to put new extensions-specific asciidoc files, and what to name them (internal issue 626). * Add src/spec/indexExt.py to autogenerate registry index entries linking into the 1.0-extensions specification, instead of maintaining the index manually. (internal issue 642). * Autogenerate extension dependencies and lists of all extensions and all KHR extensions from the "supported" attributes in +vk.xml+. Execute +make config/extDependency.sh+ from +doc/specs/vulkan+ when a supported extension is added to vk.xml, to regenerate the dependency script. The consequence is that specifying a single extension to the +makeExt+ script will automatically enable all extensions it depends on as well, and that the +makeAllExts+ and +makeKHR+ scripts do not need to be updated when a new extension is supported (internal issue 648). * Put extension appendices all at the same asciidoc section level, so KHR WSI extensions show up in the HTML index (internal issue 648). Other Issues: * Imbed images in the generated HTML specs instead of loading them from the images/ directory. * Fix missing EXT in extension name (ename:VK_EXT_SWAPCHAIN_COLOR_SPACE_EXTENSION_NAME). * Add new +VK_EXT_SMPTE_2086_metadata+ extension. * In the <<platformCreateSurface_xlib,Xlib Surface>> section of the +VK_KHR_xlib_surface+ specification, add language warning users that they always need to call code:XinitThreads. * Use the term "presentable image" (rather than "swapchain image") consistently in +VK_KHR_swapchain+ and related extensions, and add a glossary term defining it. * Relocate the valid usage for samples of flink:vkGetPhysicalDeviceSparseImageFormatProperties2KHR::pname:pFormatInfo to be below the flink:VkPhysicalDeviceSparseImageFormatInfo2KHR structure.
2017-02-11 04:37:39 +00:00
s = {1 \over 2} + { \left( x_p - x_f \right) \over \text{size} }
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
[latexmath]
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
t = {1 \over 2} + { \left( y_p - y_f \right) \over \text{size} }
Change log for January 23, 2017 Vulkan 1.0.39 spec update: * Bump API patch number and header version number to 39 for this update. Github Issues: * Clarified that only accesses via the specified buffer/image subresource ranges are included in the access scopes (public issue 306). * Add missing valid usage statements for flink:vkCreateComputePipelines and flink:vkCreateGraphicsPipelines (public issue 427). Internal Issues: * Add a Note to the <<invariance,Invariance>> appendix about a difference between OpenGL and Vulkan with regards to how primitives derived from offsets are handled (internal issue 355). * Add the +<<VK_KHR_get_physical_device_properties2>>+, +<<VK_KHR_maintenance1>>+, and +<<VK_KHR_shader_draw_parameters>>+ extensions (internal issue 448). * Add the +<<VK_EXT_shader_subgroup_vote>>+ and +<<VK_EXT_shader_subgroup_ballot>>+ extensions (internal issue 449). * Update the texture level-of-detail equation in the <<textures-scale-factor,Scale Factor Operation>> section to better approximate the ellipse major and minor axes (internal issue 547). * Forbid non-explicitly allowed uses of interface decorations in the introduction to the <<interfaces,Shader Interfaces>> chapter (internal issue 607). * Replace use of MathJax with KaTeX, for improved load-time performance as well as avoiding the scrolling-and-scrolling behavior due to MathJax asynchronous rendering when loading at an anchor inside the spec. This change also requires moving to HTML5 output for the spec instead of XHTML, and there is a visible difference in that the chapter navigation index is now in a scrollable sidebar instead of at the top of the document. We may or may not retain the nav sidebar based on feedback (internal issue 613). * Improve consistency of markup and formatting in extension appendices (internal issue 631). Other Issues: * Add explicit valid usage statements to slink:VkImageCopy requiring that the source and destination layer ranges be contained in their respective source and destination images. * Add valid usage language for swapchain of flink:vkAcquireNextImage. If the swapchain has been replaced, then it should not be passed to flink:vkAcquireNextImage. * Add a valid usage statement to flink:vkCreateImageView, that the image must have been created with an appropriate usage bit set. * Noted that slink:VkDisplayPresentInfoKHR is a valid extension of slink:VkPresentInfoKHR in the <<wsi_swapchain,WSI Swapchain>> section. * Update valid usage for flink:vkCmdSetViewport and flink:vkCmdSetScissor to account for the multiple viewport feature. If the feature is not enabled, the parameters for these functions have required values that are defined in the <<features-features-multiViewport,multiple viewports>> section of the spec but were not reflected in the valid usage text for these functions. * Add the +<<VK_EXT_swapchain_colorspace>>+ extension defining common color spaces.
2017-01-18 04:11:25 +00:00
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
=== latexmath block 4
[latexmath]
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Change log for February 10, 2017 Vulkan 1.0.40 spec update: * Bump API patch number and header version number to 40 for this update. * There is a major build change in this release. We are now using the Ruby-based ``asciidoctor'' implementation, rather than the Python-based ``asciidoc'' implementation, to process the specification. While the actual specification markup changes were minimal, this requires a new set of build tools and a very different installation process, especially because we now use an experimental direct-to-PDF backend for Asciidoctor instead of Docbook->dblatex->PDF. It is no longer possible to build the Specification using asciidoc. See doc/specs/vulkan/README.adoc for some guidance on installing the new toolchain components. * There are some minor rendering issues in the PDF output due to teething problems with the asciidoctor toolchain, especially with mathematical equations. We are aware of these and working on them. Github Issues: * Updated sample code for the <<sparsememory-examples-basic,sparse resource binding example>> (public issue 97). * Modify line and point clipping behavior in the <<vertexpostproc-clipping, Primitive Clipping>> section to allow for pop-free behavior. The ability to check for which behavior is implemented may be added a future feature or extension (public issue 113). * Unify the discussions of implicit ordering throughout the spec, in particular in the new sections <<drawing-primitive-order, Primitive Order>>, <<primrast-order, Rasterization Order>>, and <<synchronization-implicit, Implicit Synchronization Guarantees>>; the discussion of <<synchronization-submission-order, submission order>>; and references elsewhere to these sections (public issue 133). * Clarify \<\<descriptorsets-compatibility,Pipeline Layout Compatibility>> language and introduce the term ``identically defined'' (public issue 164). * Add a dependency to the +VK_EXT_debug_marker+ extension that's needed to reuse the object type enum from +VK_EXT_debug_report+, and moves the definition of that enum into +VK_EXT_debug_report+ where it should be (public issue 409). * Remove redundant valid usage statement from slink:VkImageBlit (public issue 421). * Update GL_KHR_vulkan_glsl to allow the ternary operator to result in a specialization constant (public issue 424). * Fix valid usage for flink:VkPipelineShaderStageCreateInfo (public issue 426). * Correct typo in New Objects list for <<VK_EXT_debug_report>> (public issue 447). Internal Issues: * Moved to asciidoctor for spec builds (internal issue 121). * Update style guide to describe where to put new extensions-specific asciidoc files, and what to name them (internal issue 626). * Add src/spec/indexExt.py to autogenerate registry index entries linking into the 1.0-extensions specification, instead of maintaining the index manually. (internal issue 642). * Autogenerate extension dependencies and lists of all extensions and all KHR extensions from the "supported" attributes in +vk.xml+. Execute +make config/extDependency.sh+ from +doc/specs/vulkan+ when a supported extension is added to vk.xml, to regenerate the dependency script. The consequence is that specifying a single extension to the +makeExt+ script will automatically enable all extensions it depends on as well, and that the +makeAllExts+ and +makeKHR+ scripts do not need to be updated when a new extension is supported (internal issue 648). * Put extension appendices all at the same asciidoc section level, so KHR WSI extensions show up in the HTML index (internal issue 648). Other Issues: * Imbed images in the generated HTML specs instead of loading them from the images/ directory. * Fix missing EXT in extension name (ename:VK_EXT_SWAPCHAIN_COLOR_SPACE_EXTENSION_NAME). * Add new +VK_EXT_SMPTE_2086_metadata+ extension. * In the <<platformCreateSurface_xlib,Xlib Surface>> section of the +VK_KHR_xlib_surface+ specification, add language warning users that they always need to call code:XinitThreads. * Use the term "presentable image" (rather than "swapchain image") consistently in +VK_KHR_swapchain+ and related extensions, and add a glossary term defining it. * Relocate the valid usage for samples of flink:vkGetPhysicalDeviceSparseImageFormatProperties2KHR::pname:pFormatInfo to be below the flink:VkPhysicalDeviceSparseImageFormatInfo2KHR structure.
2017-02-11 04:37:39 +00:00
t = {{( \mathbf{p}_r - \mathbf{p}_a ) \cdot ( \mathbf{p}_b - \mathbf{p}_a )}
\over {\| \mathbf{p}_b - \mathbf{p}_a \|^2 }}
Change log for January 23, 2017 Vulkan 1.0.39 spec update: * Bump API patch number and header version number to 39 for this update. Github Issues: * Clarified that only accesses via the specified buffer/image subresource ranges are included in the access scopes (public issue 306). * Add missing valid usage statements for flink:vkCreateComputePipelines and flink:vkCreateGraphicsPipelines (public issue 427). Internal Issues: * Add a Note to the <<invariance,Invariance>> appendix about a difference between OpenGL and Vulkan with regards to how primitives derived from offsets are handled (internal issue 355). * Add the +<<VK_KHR_get_physical_device_properties2>>+, +<<VK_KHR_maintenance1>>+, and +<<VK_KHR_shader_draw_parameters>>+ extensions (internal issue 448). * Add the +<<VK_EXT_shader_subgroup_vote>>+ and +<<VK_EXT_shader_subgroup_ballot>>+ extensions (internal issue 449). * Update the texture level-of-detail equation in the <<textures-scale-factor,Scale Factor Operation>> section to better approximate the ellipse major and minor axes (internal issue 547). * Forbid non-explicitly allowed uses of interface decorations in the introduction to the <<interfaces,Shader Interfaces>> chapter (internal issue 607). * Replace use of MathJax with KaTeX, for improved load-time performance as well as avoiding the scrolling-and-scrolling behavior due to MathJax asynchronous rendering when loading at an anchor inside the spec. This change also requires moving to HTML5 output for the spec instead of XHTML, and there is a visible difference in that the chapter navigation index is now in a scrollable sidebar instead of at the top of the document. We may or may not retain the nav sidebar based on feedback (internal issue 613). * Improve consistency of markup and formatting in extension appendices (internal issue 631). Other Issues: * Add explicit valid usage statements to slink:VkImageCopy requiring that the source and destination layer ranges be contained in their respective source and destination images. * Add valid usage language for swapchain of flink:vkAcquireNextImage. If the swapchain has been replaced, then it should not be passed to flink:vkAcquireNextImage. * Add a valid usage statement to flink:vkCreateImageView, that the image must have been created with an appropriate usage bit set. * Noted that slink:VkDisplayPresentInfoKHR is a valid extension of slink:VkPresentInfoKHR in the <<wsi_swapchain,WSI Swapchain>> section. * Update valid usage for flink:vkCmdSetViewport and flink:vkCmdSetScissor to account for the multiple viewport feature. If the feature is not enabled, the parameters for these functions have required values that are defined in the <<features-features-multiViewport,multiple viewports>> section of the spec but were not reflected in the valid usage text for these functions. * Add the +<<VK_EXT_swapchain_colorspace>>+ extension defining common color spaces.
2017-01-18 04:11:25 +00:00
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
=== latexmath block 5
[latexmath]
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Change log for February 10, 2017 Vulkan 1.0.40 spec update: * Bump API patch number and header version number to 40 for this update. * There is a major build change in this release. We are now using the Ruby-based ``asciidoctor'' implementation, rather than the Python-based ``asciidoc'' implementation, to process the specification. While the actual specification markup changes were minimal, this requires a new set of build tools and a very different installation process, especially because we now use an experimental direct-to-PDF backend for Asciidoctor instead of Docbook->dblatex->PDF. It is no longer possible to build the Specification using asciidoc. See doc/specs/vulkan/README.adoc for some guidance on installing the new toolchain components. * There are some minor rendering issues in the PDF output due to teething problems with the asciidoctor toolchain, especially with mathematical equations. We are aware of these and working on them. Github Issues: * Updated sample code for the <<sparsememory-examples-basic,sparse resource binding example>> (public issue 97). * Modify line and point clipping behavior in the <<vertexpostproc-clipping, Primitive Clipping>> section to allow for pop-free behavior. The ability to check for which behavior is implemented may be added a future feature or extension (public issue 113). * Unify the discussions of implicit ordering throughout the spec, in particular in the new sections <<drawing-primitive-order, Primitive Order>>, <<primrast-order, Rasterization Order>>, and <<synchronization-implicit, Implicit Synchronization Guarantees>>; the discussion of <<synchronization-submission-order, submission order>>; and references elsewhere to these sections (public issue 133). * Clarify \<\<descriptorsets-compatibility,Pipeline Layout Compatibility>> language and introduce the term ``identically defined'' (public issue 164). * Add a dependency to the +VK_EXT_debug_marker+ extension that's needed to reuse the object type enum from +VK_EXT_debug_report+, and moves the definition of that enum into +VK_EXT_debug_report+ where it should be (public issue 409). * Remove redundant valid usage statement from slink:VkImageBlit (public issue 421). * Update GL_KHR_vulkan_glsl to allow the ternary operator to result in a specialization constant (public issue 424). * Fix valid usage for flink:VkPipelineShaderStageCreateInfo (public issue 426). * Correct typo in New Objects list for <<VK_EXT_debug_report>> (public issue 447). Internal Issues: * Moved to asciidoctor for spec builds (internal issue 121). * Update style guide to describe where to put new extensions-specific asciidoc files, and what to name them (internal issue 626). * Add src/spec/indexExt.py to autogenerate registry index entries linking into the 1.0-extensions specification, instead of maintaining the index manually. (internal issue 642). * Autogenerate extension dependencies and lists of all extensions and all KHR extensions from the "supported" attributes in +vk.xml+. Execute +make config/extDependency.sh+ from +doc/specs/vulkan+ when a supported extension is added to vk.xml, to regenerate the dependency script. The consequence is that specifying a single extension to the +makeExt+ script will automatically enable all extensions it depends on as well, and that the +makeAllExts+ and +makeKHR+ scripts do not need to be updated when a new extension is supported (internal issue 648). * Put extension appendices all at the same asciidoc section level, so KHR WSI extensions show up in the HTML index (internal issue 648). Other Issues: * Imbed images in the generated HTML specs instead of loading them from the images/ directory. * Fix missing EXT in extension name (ename:VK_EXT_SWAPCHAIN_COLOR_SPACE_EXTENSION_NAME). * Add new +VK_EXT_SMPTE_2086_metadata+ extension. * In the <<platformCreateSurface_xlib,Xlib Surface>> section of the +VK_KHR_xlib_surface+ specification, add language warning users that they always need to call code:XinitThreads. * Use the term "presentable image" (rather than "swapchain image") consistently in +VK_KHR_swapchain+ and related extensions, and add a glossary term defining it. * Relocate the valid usage for samples of flink:vkGetPhysicalDeviceSparseImageFormatProperties2KHR::pname:pFormatInfo to be below the flink:VkPhysicalDeviceSparseImageFormatInfo2KHR structure.
2017-02-11 04:37:39 +00:00
f = {{ (1-t) {f_a / w_a} + t { f_b / w_b} } \over
{(1-t) / w_a + t / w_b }}
Change log for January 23, 2017 Vulkan 1.0.39 spec update: * Bump API patch number and header version number to 39 for this update. Github Issues: * Clarified that only accesses via the specified buffer/image subresource ranges are included in the access scopes (public issue 306). * Add missing valid usage statements for flink:vkCreateComputePipelines and flink:vkCreateGraphicsPipelines (public issue 427). Internal Issues: * Add a Note to the <<invariance,Invariance>> appendix about a difference between OpenGL and Vulkan with regards to how primitives derived from offsets are handled (internal issue 355). * Add the +<<VK_KHR_get_physical_device_properties2>>+, +<<VK_KHR_maintenance1>>+, and +<<VK_KHR_shader_draw_parameters>>+ extensions (internal issue 448). * Add the +<<VK_EXT_shader_subgroup_vote>>+ and +<<VK_EXT_shader_subgroup_ballot>>+ extensions (internal issue 449). * Update the texture level-of-detail equation in the <<textures-scale-factor,Scale Factor Operation>> section to better approximate the ellipse major and minor axes (internal issue 547). * Forbid non-explicitly allowed uses of interface decorations in the introduction to the <<interfaces,Shader Interfaces>> chapter (internal issue 607). * Replace use of MathJax with KaTeX, for improved load-time performance as well as avoiding the scrolling-and-scrolling behavior due to MathJax asynchronous rendering when loading at an anchor inside the spec. This change also requires moving to HTML5 output for the spec instead of XHTML, and there is a visible difference in that the chapter navigation index is now in a scrollable sidebar instead of at the top of the document. We may or may not retain the nav sidebar based on feedback (internal issue 613). * Improve consistency of markup and formatting in extension appendices (internal issue 631). Other Issues: * Add explicit valid usage statements to slink:VkImageCopy requiring that the source and destination layer ranges be contained in their respective source and destination images. * Add valid usage language for swapchain of flink:vkAcquireNextImage. If the swapchain has been replaced, then it should not be passed to flink:vkAcquireNextImage. * Add a valid usage statement to flink:vkCreateImageView, that the image must have been created with an appropriate usage bit set. * Noted that slink:VkDisplayPresentInfoKHR is a valid extension of slink:VkPresentInfoKHR in the <<wsi_swapchain,WSI Swapchain>> section. * Update valid usage for flink:vkCmdSetViewport and flink:vkCmdSetScissor to account for the multiple viewport feature. If the feature is not enabled, the parameters for these functions have required values that are defined in the <<features-features-multiViewport,multiple viewports>> section of the spec but were not reflected in the valid usage text for these functions. * Add the +<<VK_EXT_swapchain_colorspace>>+ extension defining common color spaces.
2017-01-18 04:11:25 +00:00
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
=== latexmath block 6
[latexmath]
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Change log for February 10, 2017 Vulkan 1.0.40 spec update: * Bump API patch number and header version number to 40 for this update. * There is a major build change in this release. We are now using the Ruby-based ``asciidoctor'' implementation, rather than the Python-based ``asciidoc'' implementation, to process the specification. While the actual specification markup changes were minimal, this requires a new set of build tools and a very different installation process, especially because we now use an experimental direct-to-PDF backend for Asciidoctor instead of Docbook->dblatex->PDF. It is no longer possible to build the Specification using asciidoc. See doc/specs/vulkan/README.adoc for some guidance on installing the new toolchain components. * There are some minor rendering issues in the PDF output due to teething problems with the asciidoctor toolchain, especially with mathematical equations. We are aware of these and working on them. Github Issues: * Updated sample code for the <<sparsememory-examples-basic,sparse resource binding example>> (public issue 97). * Modify line and point clipping behavior in the <<vertexpostproc-clipping, Primitive Clipping>> section to allow for pop-free behavior. The ability to check for which behavior is implemented may be added a future feature or extension (public issue 113). * Unify the discussions of implicit ordering throughout the spec, in particular in the new sections <<drawing-primitive-order, Primitive Order>>, <<primrast-order, Rasterization Order>>, and <<synchronization-implicit, Implicit Synchronization Guarantees>>; the discussion of <<synchronization-submission-order, submission order>>; and references elsewhere to these sections (public issue 133). * Clarify \<\<descriptorsets-compatibility,Pipeline Layout Compatibility>> language and introduce the term ``identically defined'' (public issue 164). * Add a dependency to the +VK_EXT_debug_marker+ extension that's needed to reuse the object type enum from +VK_EXT_debug_report+, and moves the definition of that enum into +VK_EXT_debug_report+ where it should be (public issue 409). * Remove redundant valid usage statement from slink:VkImageBlit (public issue 421). * Update GL_KHR_vulkan_glsl to allow the ternary operator to result in a specialization constant (public issue 424). * Fix valid usage for flink:VkPipelineShaderStageCreateInfo (public issue 426). * Correct typo in New Objects list for <<VK_EXT_debug_report>> (public issue 447). Internal Issues: * Moved to asciidoctor for spec builds (internal issue 121). * Update style guide to describe where to put new extensions-specific asciidoc files, and what to name them (internal issue 626). * Add src/spec/indexExt.py to autogenerate registry index entries linking into the 1.0-extensions specification, instead of maintaining the index manually. (internal issue 642). * Autogenerate extension dependencies and lists of all extensions and all KHR extensions from the "supported" attributes in +vk.xml+. Execute +make config/extDependency.sh+ from +doc/specs/vulkan+ when a supported extension is added to vk.xml, to regenerate the dependency script. The consequence is that specifying a single extension to the +makeExt+ script will automatically enable all extensions it depends on as well, and that the +makeAllExts+ and +makeKHR+ scripts do not need to be updated when a new extension is supported (internal issue 648). * Put extension appendices all at the same asciidoc section level, so KHR WSI extensions show up in the HTML index (internal issue 648). Other Issues: * Imbed images in the generated HTML specs instead of loading them from the images/ directory. * Fix missing EXT in extension name (ename:VK_EXT_SWAPCHAIN_COLOR_SPACE_EXTENSION_NAME). * Add new +VK_EXT_SMPTE_2086_metadata+ extension. * In the <<platformCreateSurface_xlib,Xlib Surface>> section of the +VK_KHR_xlib_surface+ specification, add language warning users that they always need to call code:XinitThreads. * Use the term "presentable image" (rather than "swapchain image") consistently in +VK_KHR_swapchain+ and related extensions, and add a glossary term defining it. * Relocate the valid usage for samples of flink:vkGetPhysicalDeviceSparseImageFormatProperties2KHR::pname:pFormatInfo to be below the flink:VkPhysicalDeviceSparseImageFormatInfo2KHR structure.
2017-02-11 04:37:39 +00:00
a = -{1 \over 2}\sum_{i=0}^{n-1}
x_f^i y_f^{i \oplus 1} -
x_f^{i \oplus 1} y_f^i
Change log for January 23, 2017 Vulkan 1.0.39 spec update: * Bump API patch number and header version number to 39 for this update. Github Issues: * Clarified that only accesses via the specified buffer/image subresource ranges are included in the access scopes (public issue 306). * Add missing valid usage statements for flink:vkCreateComputePipelines and flink:vkCreateGraphicsPipelines (public issue 427). Internal Issues: * Add a Note to the <<invariance,Invariance>> appendix about a difference between OpenGL and Vulkan with regards to how primitives derived from offsets are handled (internal issue 355). * Add the +<<VK_KHR_get_physical_device_properties2>>+, +<<VK_KHR_maintenance1>>+, and +<<VK_KHR_shader_draw_parameters>>+ extensions (internal issue 448). * Add the +<<VK_EXT_shader_subgroup_vote>>+ and +<<VK_EXT_shader_subgroup_ballot>>+ extensions (internal issue 449). * Update the texture level-of-detail equation in the <<textures-scale-factor,Scale Factor Operation>> section to better approximate the ellipse major and minor axes (internal issue 547). * Forbid non-explicitly allowed uses of interface decorations in the introduction to the <<interfaces,Shader Interfaces>> chapter (internal issue 607). * Replace use of MathJax with KaTeX, for improved load-time performance as well as avoiding the scrolling-and-scrolling behavior due to MathJax asynchronous rendering when loading at an anchor inside the spec. This change also requires moving to HTML5 output for the spec instead of XHTML, and there is a visible difference in that the chapter navigation index is now in a scrollable sidebar instead of at the top of the document. We may or may not retain the nav sidebar based on feedback (internal issue 613). * Improve consistency of markup and formatting in extension appendices (internal issue 631). Other Issues: * Add explicit valid usage statements to slink:VkImageCopy requiring that the source and destination layer ranges be contained in their respective source and destination images. * Add valid usage language for swapchain of flink:vkAcquireNextImage. If the swapchain has been replaced, then it should not be passed to flink:vkAcquireNextImage. * Add a valid usage statement to flink:vkCreateImageView, that the image must have been created with an appropriate usage bit set. * Noted that slink:VkDisplayPresentInfoKHR is a valid extension of slink:VkPresentInfoKHR in the <<wsi_swapchain,WSI Swapchain>> section. * Update valid usage for flink:vkCmdSetViewport and flink:vkCmdSetScissor to account for the multiple viewport feature. If the feature is not enabled, the parameters for these functions have required values that are defined in the <<features-features-multiViewport,multiple viewports>> section of the spec but were not reflected in the valid usage text for these functions. * Add the +<<VK_EXT_swapchain_colorspace>>+ extension defining common color spaces.
2017-01-18 04:11:25 +00:00
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
=== latexmath inline 3
Change log for February 10, 2017 Vulkan 1.0.40 spec update: * Bump API patch number and header version number to 40 for this update. * There is a major build change in this release. We are now using the Ruby-based ``asciidoctor'' implementation, rather than the Python-based ``asciidoc'' implementation, to process the specification. While the actual specification markup changes were minimal, this requires a new set of build tools and a very different installation process, especially because we now use an experimental direct-to-PDF backend for Asciidoctor instead of Docbook->dblatex->PDF. It is no longer possible to build the Specification using asciidoc. See doc/specs/vulkan/README.adoc for some guidance on installing the new toolchain components. * There are some minor rendering issues in the PDF output due to teething problems with the asciidoctor toolchain, especially with mathematical equations. We are aware of these and working on them. Github Issues: * Updated sample code for the <<sparsememory-examples-basic,sparse resource binding example>> (public issue 97). * Modify line and point clipping behavior in the <<vertexpostproc-clipping, Primitive Clipping>> section to allow for pop-free behavior. The ability to check for which behavior is implemented may be added a future feature or extension (public issue 113). * Unify the discussions of implicit ordering throughout the spec, in particular in the new sections <<drawing-primitive-order, Primitive Order>>, <<primrast-order, Rasterization Order>>, and <<synchronization-implicit, Implicit Synchronization Guarantees>>; the discussion of <<synchronization-submission-order, submission order>>; and references elsewhere to these sections (public issue 133). * Clarify \<\<descriptorsets-compatibility,Pipeline Layout Compatibility>> language and introduce the term ``identically defined'' (public issue 164). * Add a dependency to the +VK_EXT_debug_marker+ extension that's needed to reuse the object type enum from +VK_EXT_debug_report+, and moves the definition of that enum into +VK_EXT_debug_report+ where it should be (public issue 409). * Remove redundant valid usage statement from slink:VkImageBlit (public issue 421). * Update GL_KHR_vulkan_glsl to allow the ternary operator to result in a specialization constant (public issue 424). * Fix valid usage for flink:VkPipelineShaderStageCreateInfo (public issue 426). * Correct typo in New Objects list for <<VK_EXT_debug_report>> (public issue 447). Internal Issues: * Moved to asciidoctor for spec builds (internal issue 121). * Update style guide to describe where to put new extensions-specific asciidoc files, and what to name them (internal issue 626). * Add src/spec/indexExt.py to autogenerate registry index entries linking into the 1.0-extensions specification, instead of maintaining the index manually. (internal issue 642). * Autogenerate extension dependencies and lists of all extensions and all KHR extensions from the "supported" attributes in +vk.xml+. Execute +make config/extDependency.sh+ from +doc/specs/vulkan+ when a supported extension is added to vk.xml, to regenerate the dependency script. The consequence is that specifying a single extension to the +makeExt+ script will automatically enable all extensions it depends on as well, and that the +makeAllExts+ and +makeKHR+ scripts do not need to be updated when a new extension is supported (internal issue 648). * Put extension appendices all at the same asciidoc section level, so KHR WSI extensions show up in the HTML index (internal issue 648). Other Issues: * Imbed images in the generated HTML specs instead of loading them from the images/ directory. * Fix missing EXT in extension name (ename:VK_EXT_SWAPCHAIN_COLOR_SPACE_EXTENSION_NAME). * Add new +VK_EXT_SMPTE_2086_metadata+ extension. * In the <<platformCreateSurface_xlib,Xlib Surface>> section of the +VK_KHR_xlib_surface+ specification, add language warning users that they always need to call code:XinitThreads. * Use the term "presentable image" (rather than "swapchain image") consistently in +VK_KHR_swapchain+ and related extensions, and add a glossary term defining it. * Relocate the valid usage for samples of flink:vkGetPhysicalDeviceSparseImageFormatProperties2KHR::pname:pFormatInfo to be below the flink:VkPhysicalDeviceSparseImageFormatInfo2KHR structure.
2017-02-11 04:37:39 +00:00
latexmath:[x_f^i] and latexmath:[y_f^i]
Change log for January 23, 2017 Vulkan 1.0.39 spec update: * Bump API patch number and header version number to 39 for this update. Github Issues: * Clarified that only accesses via the specified buffer/image subresource ranges are included in the access scopes (public issue 306). * Add missing valid usage statements for flink:vkCreateComputePipelines and flink:vkCreateGraphicsPipelines (public issue 427). Internal Issues: * Add a Note to the <<invariance,Invariance>> appendix about a difference between OpenGL and Vulkan with regards to how primitives derived from offsets are handled (internal issue 355). * Add the +<<VK_KHR_get_physical_device_properties2>>+, +<<VK_KHR_maintenance1>>+, and +<<VK_KHR_shader_draw_parameters>>+ extensions (internal issue 448). * Add the +<<VK_EXT_shader_subgroup_vote>>+ and +<<VK_EXT_shader_subgroup_ballot>>+ extensions (internal issue 449). * Update the texture level-of-detail equation in the <<textures-scale-factor,Scale Factor Operation>> section to better approximate the ellipse major and minor axes (internal issue 547). * Forbid non-explicitly allowed uses of interface decorations in the introduction to the <<interfaces,Shader Interfaces>> chapter (internal issue 607). * Replace use of MathJax with KaTeX, for improved load-time performance as well as avoiding the scrolling-and-scrolling behavior due to MathJax asynchronous rendering when loading at an anchor inside the spec. This change also requires moving to HTML5 output for the spec instead of XHTML, and there is a visible difference in that the chapter navigation index is now in a scrollable sidebar instead of at the top of the document. We may or may not retain the nav sidebar based on feedback (internal issue 613). * Improve consistency of markup and formatting in extension appendices (internal issue 631). Other Issues: * Add explicit valid usage statements to slink:VkImageCopy requiring that the source and destination layer ranges be contained in their respective source and destination images. * Add valid usage language for swapchain of flink:vkAcquireNextImage. If the swapchain has been replaced, then it should not be passed to flink:vkAcquireNextImage. * Add a valid usage statement to flink:vkCreateImageView, that the image must have been created with an appropriate usage bit set. * Noted that slink:VkDisplayPresentInfoKHR is a valid extension of slink:VkPresentInfoKHR in the <<wsi_swapchain,WSI Swapchain>> section. * Update valid usage for flink:vkCmdSetViewport and flink:vkCmdSetScissor to account for the multiple viewport feature. If the feature is not enabled, the parameters for these functions have required values that are defined in the <<features-features-multiViewport,multiple viewports>> section of the spec but were not reflected in the valid usage text for these functions. * Add the +<<VK_EXT_swapchain_colorspace>>+ extension defining common color spaces.
2017-01-18 04:11:25 +00:00
=== latexmath block 7
[latexmath]
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Change log for February 10, 2017 Vulkan 1.0.40 spec update: * Bump API patch number and header version number to 40 for this update. * There is a major build change in this release. We are now using the Ruby-based ``asciidoctor'' implementation, rather than the Python-based ``asciidoc'' implementation, to process the specification. While the actual specification markup changes were minimal, this requires a new set of build tools and a very different installation process, especially because we now use an experimental direct-to-PDF backend for Asciidoctor instead of Docbook->dblatex->PDF. It is no longer possible to build the Specification using asciidoc. See doc/specs/vulkan/README.adoc for some guidance on installing the new toolchain components. * There are some minor rendering issues in the PDF output due to teething problems with the asciidoctor toolchain, especially with mathematical equations. We are aware of these and working on them. Github Issues: * Updated sample code for the <<sparsememory-examples-basic,sparse resource binding example>> (public issue 97). * Modify line and point clipping behavior in the <<vertexpostproc-clipping, Primitive Clipping>> section to allow for pop-free behavior. The ability to check for which behavior is implemented may be added a future feature or extension (public issue 113). * Unify the discussions of implicit ordering throughout the spec, in particular in the new sections <<drawing-primitive-order, Primitive Order>>, <<primrast-order, Rasterization Order>>, and <<synchronization-implicit, Implicit Synchronization Guarantees>>; the discussion of <<synchronization-submission-order, submission order>>; and references elsewhere to these sections (public issue 133). * Clarify \<\<descriptorsets-compatibility,Pipeline Layout Compatibility>> language and introduce the term ``identically defined'' (public issue 164). * Add a dependency to the +VK_EXT_debug_marker+ extension that's needed to reuse the object type enum from +VK_EXT_debug_report+, and moves the definition of that enum into +VK_EXT_debug_report+ where it should be (public issue 409). * Remove redundant valid usage statement from slink:VkImageBlit (public issue 421). * Update GL_KHR_vulkan_glsl to allow the ternary operator to result in a specialization constant (public issue 424). * Fix valid usage for flink:VkPipelineShaderStageCreateInfo (public issue 426). * Correct typo in New Objects list for <<VK_EXT_debug_report>> (public issue 447). Internal Issues: * Moved to asciidoctor for spec builds (internal issue 121). * Update style guide to describe where to put new extensions-specific asciidoc files, and what to name them (internal issue 626). * Add src/spec/indexExt.py to autogenerate registry index entries linking into the 1.0-extensions specification, instead of maintaining the index manually. (internal issue 642). * Autogenerate extension dependencies and lists of all extensions and all KHR extensions from the "supported" attributes in +vk.xml+. Execute +make config/extDependency.sh+ from +doc/specs/vulkan+ when a supported extension is added to vk.xml, to regenerate the dependency script. The consequence is that specifying a single extension to the +makeExt+ script will automatically enable all extensions it depends on as well, and that the +makeAllExts+ and +makeKHR+ scripts do not need to be updated when a new extension is supported (internal issue 648). * Put extension appendices all at the same asciidoc section level, so KHR WSI extensions show up in the HTML index (internal issue 648). Other Issues: * Imbed images in the generated HTML specs instead of loading them from the images/ directory. * Fix missing EXT in extension name (ename:VK_EXT_SWAPCHAIN_COLOR_SPACE_EXTENSION_NAME). * Add new +VK_EXT_SMPTE_2086_metadata+ extension. * In the <<platformCreateSurface_xlib,Xlib Surface>> section of the +VK_KHR_xlib_surface+ specification, add language warning users that they always need to call code:XinitThreads. * Use the term "presentable image" (rather than "swapchain image") consistently in +VK_KHR_swapchain+ and related extensions, and add a glossary term defining it. * Relocate the valid usage for samples of flink:vkGetPhysicalDeviceSparseImageFormatProperties2KHR::pname:pFormatInfo to be below the flink:VkPhysicalDeviceSparseImageFormatInfo2KHR structure.
2017-02-11 04:37:39 +00:00
a = {{\mathrm{A}(p p_b p_c)} \over {\mathrm{A}(p_a p_b p_c)}}, \quad
b = {{\mathrm{A}(p p_a p_c)} \over {\mathrm{A}(p_a p_b p_c)}}, \quad
c = {{\mathrm{A}(p p_a p_b)} \over {\mathrm{A}(p_a p_b p_c)}},
Change log for January 23, 2017 Vulkan 1.0.39 spec update: * Bump API patch number and header version number to 39 for this update. Github Issues: * Clarified that only accesses via the specified buffer/image subresource ranges are included in the access scopes (public issue 306). * Add missing valid usage statements for flink:vkCreateComputePipelines and flink:vkCreateGraphicsPipelines (public issue 427). Internal Issues: * Add a Note to the <<invariance,Invariance>> appendix about a difference between OpenGL and Vulkan with regards to how primitives derived from offsets are handled (internal issue 355). * Add the +<<VK_KHR_get_physical_device_properties2>>+, +<<VK_KHR_maintenance1>>+, and +<<VK_KHR_shader_draw_parameters>>+ extensions (internal issue 448). * Add the +<<VK_EXT_shader_subgroup_vote>>+ and +<<VK_EXT_shader_subgroup_ballot>>+ extensions (internal issue 449). * Update the texture level-of-detail equation in the <<textures-scale-factor,Scale Factor Operation>> section to better approximate the ellipse major and minor axes (internal issue 547). * Forbid non-explicitly allowed uses of interface decorations in the introduction to the <<interfaces,Shader Interfaces>> chapter (internal issue 607). * Replace use of MathJax with KaTeX, for improved load-time performance as well as avoiding the scrolling-and-scrolling behavior due to MathJax asynchronous rendering when loading at an anchor inside the spec. This change also requires moving to HTML5 output for the spec instead of XHTML, and there is a visible difference in that the chapter navigation index is now in a scrollable sidebar instead of at the top of the document. We may or may not retain the nav sidebar based on feedback (internal issue 613). * Improve consistency of markup and formatting in extension appendices (internal issue 631). Other Issues: * Add explicit valid usage statements to slink:VkImageCopy requiring that the source and destination layer ranges be contained in their respective source and destination images. * Add valid usage language for swapchain of flink:vkAcquireNextImage. If the swapchain has been replaced, then it should not be passed to flink:vkAcquireNextImage. * Add a valid usage statement to flink:vkCreateImageView, that the image must have been created with an appropriate usage bit set. * Noted that slink:VkDisplayPresentInfoKHR is a valid extension of slink:VkPresentInfoKHR in the <<wsi_swapchain,WSI Swapchain>> section. * Update valid usage for flink:vkCmdSetViewport and flink:vkCmdSetScissor to account for the multiple viewport feature. If the feature is not enabled, the parameters for these functions have required values that are defined in the <<features-features-multiViewport,multiple viewports>> section of the spec but were not reflected in the valid usage text for these functions. * Add the +<<VK_EXT_swapchain_colorspace>>+ extension defining common color spaces.
2017-01-18 04:11:25 +00:00
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
=== latexmath block 8
[latexmath]
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Change log for February 10, 2017 Vulkan 1.0.40 spec update: * Bump API patch number and header version number to 40 for this update. * There is a major build change in this release. We are now using the Ruby-based ``asciidoctor'' implementation, rather than the Python-based ``asciidoc'' implementation, to process the specification. While the actual specification markup changes were minimal, this requires a new set of build tools and a very different installation process, especially because we now use an experimental direct-to-PDF backend for Asciidoctor instead of Docbook->dblatex->PDF. It is no longer possible to build the Specification using asciidoc. See doc/specs/vulkan/README.adoc for some guidance on installing the new toolchain components. * There are some minor rendering issues in the PDF output due to teething problems with the asciidoctor toolchain, especially with mathematical equations. We are aware of these and working on them. Github Issues: * Updated sample code for the <<sparsememory-examples-basic,sparse resource binding example>> (public issue 97). * Modify line and point clipping behavior in the <<vertexpostproc-clipping, Primitive Clipping>> section to allow for pop-free behavior. The ability to check for which behavior is implemented may be added a future feature or extension (public issue 113). * Unify the discussions of implicit ordering throughout the spec, in particular in the new sections <<drawing-primitive-order, Primitive Order>>, <<primrast-order, Rasterization Order>>, and <<synchronization-implicit, Implicit Synchronization Guarantees>>; the discussion of <<synchronization-submission-order, submission order>>; and references elsewhere to these sections (public issue 133). * Clarify \<\<descriptorsets-compatibility,Pipeline Layout Compatibility>> language and introduce the term ``identically defined'' (public issue 164). * Add a dependency to the +VK_EXT_debug_marker+ extension that's needed to reuse the object type enum from +VK_EXT_debug_report+, and moves the definition of that enum into +VK_EXT_debug_report+ where it should be (public issue 409). * Remove redundant valid usage statement from slink:VkImageBlit (public issue 421). * Update GL_KHR_vulkan_glsl to allow the ternary operator to result in a specialization constant (public issue 424). * Fix valid usage for flink:VkPipelineShaderStageCreateInfo (public issue 426). * Correct typo in New Objects list for <<VK_EXT_debug_report>> (public issue 447). Internal Issues: * Moved to asciidoctor for spec builds (internal issue 121). * Update style guide to describe where to put new extensions-specific asciidoc files, and what to name them (internal issue 626). * Add src/spec/indexExt.py to autogenerate registry index entries linking into the 1.0-extensions specification, instead of maintaining the index manually. (internal issue 642). * Autogenerate extension dependencies and lists of all extensions and all KHR extensions from the "supported" attributes in +vk.xml+. Execute +make config/extDependency.sh+ from +doc/specs/vulkan+ when a supported extension is added to vk.xml, to regenerate the dependency script. The consequence is that specifying a single extension to the +makeExt+ script will automatically enable all extensions it depends on as well, and that the +makeAllExts+ and +makeKHR+ scripts do not need to be updated when a new extension is supported (internal issue 648). * Put extension appendices all at the same asciidoc section level, so KHR WSI extensions show up in the HTML index (internal issue 648). Other Issues: * Imbed images in the generated HTML specs instead of loading them from the images/ directory. * Fix missing EXT in extension name (ename:VK_EXT_SWAPCHAIN_COLOR_SPACE_EXTENSION_NAME). * Add new +VK_EXT_SMPTE_2086_metadata+ extension. * In the <<platformCreateSurface_xlib,Xlib Surface>> section of the +VK_KHR_xlib_surface+ specification, add language warning users that they always need to call code:XinitThreads. * Use the term "presentable image" (rather than "swapchain image") consistently in +VK_KHR_swapchain+ and related extensions, and add a glossary term defining it. * Relocate the valid usage for samples of flink:vkGetPhysicalDeviceSparseImageFormatProperties2KHR::pname:pFormatInfo to be below the flink:VkPhysicalDeviceSparseImageFormatInfo2KHR structure.
2017-02-11 04:37:39 +00:00
f = { a {f_a / w_a} + b {f_b / w_b} + c {f_c / w_c} } \over
{ {a / w_a} + {b / w_b} + {c / w_c} }
Change log for January 23, 2017 Vulkan 1.0.39 spec update: * Bump API patch number and header version number to 39 for this update. Github Issues: * Clarified that only accesses via the specified buffer/image subresource ranges are included in the access scopes (public issue 306). * Add missing valid usage statements for flink:vkCreateComputePipelines and flink:vkCreateGraphicsPipelines (public issue 427). Internal Issues: * Add a Note to the <<invariance,Invariance>> appendix about a difference between OpenGL and Vulkan with regards to how primitives derived from offsets are handled (internal issue 355). * Add the +<<VK_KHR_get_physical_device_properties2>>+, +<<VK_KHR_maintenance1>>+, and +<<VK_KHR_shader_draw_parameters>>+ extensions (internal issue 448). * Add the +<<VK_EXT_shader_subgroup_vote>>+ and +<<VK_EXT_shader_subgroup_ballot>>+ extensions (internal issue 449). * Update the texture level-of-detail equation in the <<textures-scale-factor,Scale Factor Operation>> section to better approximate the ellipse major and minor axes (internal issue 547). * Forbid non-explicitly allowed uses of interface decorations in the introduction to the <<interfaces,Shader Interfaces>> chapter (internal issue 607). * Replace use of MathJax with KaTeX, for improved load-time performance as well as avoiding the scrolling-and-scrolling behavior due to MathJax asynchronous rendering when loading at an anchor inside the spec. This change also requires moving to HTML5 output for the spec instead of XHTML, and there is a visible difference in that the chapter navigation index is now in a scrollable sidebar instead of at the top of the document. We may or may not retain the nav sidebar based on feedback (internal issue 613). * Improve consistency of markup and formatting in extension appendices (internal issue 631). Other Issues: * Add explicit valid usage statements to slink:VkImageCopy requiring that the source and destination layer ranges be contained in their respective source and destination images. * Add valid usage language for swapchain of flink:vkAcquireNextImage. If the swapchain has been replaced, then it should not be passed to flink:vkAcquireNextImage. * Add a valid usage statement to flink:vkCreateImageView, that the image must have been created with an appropriate usage bit set. * Noted that slink:VkDisplayPresentInfoKHR is a valid extension of slink:VkPresentInfoKHR in the <<wsi_swapchain,WSI Swapchain>> section. * Update valid usage for flink:vkCmdSetViewport and flink:vkCmdSetScissor to account for the multiple viewport feature. If the feature is not enabled, the parameters for these functions have required values that are defined in the <<features-features-multiViewport,multiple viewports>> section of the spec but were not reflected in the valid usage text for these functions. * Add the +<<VK_EXT_swapchain_colorspace>>+ extension defining common color spaces.
2017-01-18 04:11:25 +00:00
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
== File chapters/fundamentals.txt
=== latexmath block 9
[latexmath]
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Change log for February 10, 2017 Vulkan 1.0.40 spec update: * Bump API patch number and header version number to 40 for this update. * There is a major build change in this release. We are now using the Ruby-based ``asciidoctor'' implementation, rather than the Python-based ``asciidoc'' implementation, to process the specification. While the actual specification markup changes were minimal, this requires a new set of build tools and a very different installation process, especially because we now use an experimental direct-to-PDF backend for Asciidoctor instead of Docbook->dblatex->PDF. It is no longer possible to build the Specification using asciidoc. See doc/specs/vulkan/README.adoc for some guidance on installing the new toolchain components. * There are some minor rendering issues in the PDF output due to teething problems with the asciidoctor toolchain, especially with mathematical equations. We are aware of these and working on them. Github Issues: * Updated sample code for the <<sparsememory-examples-basic,sparse resource binding example>> (public issue 97). * Modify line and point clipping behavior in the <<vertexpostproc-clipping, Primitive Clipping>> section to allow for pop-free behavior. The ability to check for which behavior is implemented may be added a future feature or extension (public issue 113). * Unify the discussions of implicit ordering throughout the spec, in particular in the new sections <<drawing-primitive-order, Primitive Order>>, <<primrast-order, Rasterization Order>>, and <<synchronization-implicit, Implicit Synchronization Guarantees>>; the discussion of <<synchronization-submission-order, submission order>>; and references elsewhere to these sections (public issue 133). * Clarify \<\<descriptorsets-compatibility,Pipeline Layout Compatibility>> language and introduce the term ``identically defined'' (public issue 164). * Add a dependency to the +VK_EXT_debug_marker+ extension that's needed to reuse the object type enum from +VK_EXT_debug_report+, and moves the definition of that enum into +VK_EXT_debug_report+ where it should be (public issue 409). * Remove redundant valid usage statement from slink:VkImageBlit (public issue 421). * Update GL_KHR_vulkan_glsl to allow the ternary operator to result in a specialization constant (public issue 424). * Fix valid usage for flink:VkPipelineShaderStageCreateInfo (public issue 426). * Correct typo in New Objects list for <<VK_EXT_debug_report>> (public issue 447). Internal Issues: * Moved to asciidoctor for spec builds (internal issue 121). * Update style guide to describe where to put new extensions-specific asciidoc files, and what to name them (internal issue 626). * Add src/spec/indexExt.py to autogenerate registry index entries linking into the 1.0-extensions specification, instead of maintaining the index manually. (internal issue 642). * Autogenerate extension dependencies and lists of all extensions and all KHR extensions from the "supported" attributes in +vk.xml+. Execute +make config/extDependency.sh+ from +doc/specs/vulkan+ when a supported extension is added to vk.xml, to regenerate the dependency script. The consequence is that specifying a single extension to the +makeExt+ script will automatically enable all extensions it depends on as well, and that the +makeAllExts+ and +makeKHR+ scripts do not need to be updated when a new extension is supported (internal issue 648). * Put extension appendices all at the same asciidoc section level, so KHR WSI extensions show up in the HTML index (internal issue 648). Other Issues: * Imbed images in the generated HTML specs instead of loading them from the images/ directory. * Fix missing EXT in extension name (ename:VK_EXT_SWAPCHAIN_COLOR_SPACE_EXTENSION_NAME). * Add new +VK_EXT_SMPTE_2086_metadata+ extension. * In the <<platformCreateSurface_xlib,Xlib Surface>> section of the +VK_KHR_xlib_surface+ specification, add language warning users that they always need to call code:XinitThreads. * Use the term "presentable image" (rather than "swapchain image") consistently in +VK_KHR_swapchain+ and related extensions, and add a glossary term defining it. * Relocate the valid usage for samples of flink:vkGetPhysicalDeviceSparseImageFormatProperties2KHR::pname:pFormatInfo to be below the flink:VkPhysicalDeviceSparseImageFormatInfo2KHR structure.
2017-02-11 04:37:39 +00:00
f = { c \over { 2^b - 1 } }
Change log for January 23, 2017 Vulkan 1.0.39 spec update: * Bump API patch number and header version number to 39 for this update. Github Issues: * Clarified that only accesses via the specified buffer/image subresource ranges are included in the access scopes (public issue 306). * Add missing valid usage statements for flink:vkCreateComputePipelines and flink:vkCreateGraphicsPipelines (public issue 427). Internal Issues: * Add a Note to the <<invariance,Invariance>> appendix about a difference between OpenGL and Vulkan with regards to how primitives derived from offsets are handled (internal issue 355). * Add the +<<VK_KHR_get_physical_device_properties2>>+, +<<VK_KHR_maintenance1>>+, and +<<VK_KHR_shader_draw_parameters>>+ extensions (internal issue 448). * Add the +<<VK_EXT_shader_subgroup_vote>>+ and +<<VK_EXT_shader_subgroup_ballot>>+ extensions (internal issue 449). * Update the texture level-of-detail equation in the <<textures-scale-factor,Scale Factor Operation>> section to better approximate the ellipse major and minor axes (internal issue 547). * Forbid non-explicitly allowed uses of interface decorations in the introduction to the <<interfaces,Shader Interfaces>> chapter (internal issue 607). * Replace use of MathJax with KaTeX, for improved load-time performance as well as avoiding the scrolling-and-scrolling behavior due to MathJax asynchronous rendering when loading at an anchor inside the spec. This change also requires moving to HTML5 output for the spec instead of XHTML, and there is a visible difference in that the chapter navigation index is now in a scrollable sidebar instead of at the top of the document. We may or may not retain the nav sidebar based on feedback (internal issue 613). * Improve consistency of markup and formatting in extension appendices (internal issue 631). Other Issues: * Add explicit valid usage statements to slink:VkImageCopy requiring that the source and destination layer ranges be contained in their respective source and destination images. * Add valid usage language for swapchain of flink:vkAcquireNextImage. If the swapchain has been replaced, then it should not be passed to flink:vkAcquireNextImage. * Add a valid usage statement to flink:vkCreateImageView, that the image must have been created with an appropriate usage bit set. * Noted that slink:VkDisplayPresentInfoKHR is a valid extension of slink:VkPresentInfoKHR in the <<wsi_swapchain,WSI Swapchain>> section. * Update valid usage for flink:vkCmdSetViewport and flink:vkCmdSetScissor to account for the multiple viewport feature. If the feature is not enabled, the parameters for these functions have required values that are defined in the <<features-features-multiViewport,multiple viewports>> section of the spec but were not reflected in the valid usage text for these functions. * Add the +<<VK_EXT_swapchain_colorspace>>+ extension defining common color spaces.
2017-01-18 04:11:25 +00:00
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
=== latexmath block 10
[latexmath]
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Change log for February 10, 2017 Vulkan 1.0.40 spec update: * Bump API patch number and header version number to 40 for this update. * There is a major build change in this release. We are now using the Ruby-based ``asciidoctor'' implementation, rather than the Python-based ``asciidoc'' implementation, to process the specification. While the actual specification markup changes were minimal, this requires a new set of build tools and a very different installation process, especially because we now use an experimental direct-to-PDF backend for Asciidoctor instead of Docbook->dblatex->PDF. It is no longer possible to build the Specification using asciidoc. See doc/specs/vulkan/README.adoc for some guidance on installing the new toolchain components. * There are some minor rendering issues in the PDF output due to teething problems with the asciidoctor toolchain, especially with mathematical equations. We are aware of these and working on them. Github Issues: * Updated sample code for the <<sparsememory-examples-basic,sparse resource binding example>> (public issue 97). * Modify line and point clipping behavior in the <<vertexpostproc-clipping, Primitive Clipping>> section to allow for pop-free behavior. The ability to check for which behavior is implemented may be added a future feature or extension (public issue 113). * Unify the discussions of implicit ordering throughout the spec, in particular in the new sections <<drawing-primitive-order, Primitive Order>>, <<primrast-order, Rasterization Order>>, and <<synchronization-implicit, Implicit Synchronization Guarantees>>; the discussion of <<synchronization-submission-order, submission order>>; and references elsewhere to these sections (public issue 133). * Clarify \<\<descriptorsets-compatibility,Pipeline Layout Compatibility>> language and introduce the term ``identically defined'' (public issue 164). * Add a dependency to the +VK_EXT_debug_marker+ extension that's needed to reuse the object type enum from +VK_EXT_debug_report+, and moves the definition of that enum into +VK_EXT_debug_report+ where it should be (public issue 409). * Remove redundant valid usage statement from slink:VkImageBlit (public issue 421). * Update GL_KHR_vulkan_glsl to allow the ternary operator to result in a specialization constant (public issue 424). * Fix valid usage for flink:VkPipelineShaderStageCreateInfo (public issue 426). * Correct typo in New Objects list for <<VK_EXT_debug_report>> (public issue 447). Internal Issues: * Moved to asciidoctor for spec builds (internal issue 121). * Update style guide to describe where to put new extensions-specific asciidoc files, and what to name them (internal issue 626). * Add src/spec/indexExt.py to autogenerate registry index entries linking into the 1.0-extensions specification, instead of maintaining the index manually. (internal issue 642). * Autogenerate extension dependencies and lists of all extensions and all KHR extensions from the "supported" attributes in +vk.xml+. Execute +make config/extDependency.sh+ from +doc/specs/vulkan+ when a supported extension is added to vk.xml, to regenerate the dependency script. The consequence is that specifying a single extension to the +makeExt+ script will automatically enable all extensions it depends on as well, and that the +makeAllExts+ and +makeKHR+ scripts do not need to be updated when a new extension is supported (internal issue 648). * Put extension appendices all at the same asciidoc section level, so KHR WSI extensions show up in the HTML index (internal issue 648). Other Issues: * Imbed images in the generated HTML specs instead of loading them from the images/ directory. * Fix missing EXT in extension name (ename:VK_EXT_SWAPCHAIN_COLOR_SPACE_EXTENSION_NAME). * Add new +VK_EXT_SMPTE_2086_metadata+ extension. * In the <<platformCreateSurface_xlib,Xlib Surface>> section of the +VK_KHR_xlib_surface+ specification, add language warning users that they always need to call code:XinitThreads. * Use the term "presentable image" (rather than "swapchain image") consistently in +VK_KHR_swapchain+ and related extensions, and add a glossary term defining it. * Relocate the valid usage for samples of flink:vkGetPhysicalDeviceSparseImageFormatProperties2KHR::pname:pFormatInfo to be below the flink:VkPhysicalDeviceSparseImageFormatInfo2KHR structure.
2017-02-11 04:37:39 +00:00
f = \max\left( {c \over {2^{b-1} - 1}}, -1.0 \right)
Change log for January 23, 2017 Vulkan 1.0.39 spec update: * Bump API patch number and header version number to 39 for this update. Github Issues: * Clarified that only accesses via the specified buffer/image subresource ranges are included in the access scopes (public issue 306). * Add missing valid usage statements for flink:vkCreateComputePipelines and flink:vkCreateGraphicsPipelines (public issue 427). Internal Issues: * Add a Note to the <<invariance,Invariance>> appendix about a difference between OpenGL and Vulkan with regards to how primitives derived from offsets are handled (internal issue 355). * Add the +<<VK_KHR_get_physical_device_properties2>>+, +<<VK_KHR_maintenance1>>+, and +<<VK_KHR_shader_draw_parameters>>+ extensions (internal issue 448). * Add the +<<VK_EXT_shader_subgroup_vote>>+ and +<<VK_EXT_shader_subgroup_ballot>>+ extensions (internal issue 449). * Update the texture level-of-detail equation in the <<textures-scale-factor,Scale Factor Operation>> section to better approximate the ellipse major and minor axes (internal issue 547). * Forbid non-explicitly allowed uses of interface decorations in the introduction to the <<interfaces,Shader Interfaces>> chapter (internal issue 607). * Replace use of MathJax with KaTeX, for improved load-time performance as well as avoiding the scrolling-and-scrolling behavior due to MathJax asynchronous rendering when loading at an anchor inside the spec. This change also requires moving to HTML5 output for the spec instead of XHTML, and there is a visible difference in that the chapter navigation index is now in a scrollable sidebar instead of at the top of the document. We may or may not retain the nav sidebar based on feedback (internal issue 613). * Improve consistency of markup and formatting in extension appendices (internal issue 631). Other Issues: * Add explicit valid usage statements to slink:VkImageCopy requiring that the source and destination layer ranges be contained in their respective source and destination images. * Add valid usage language for swapchain of flink:vkAcquireNextImage. If the swapchain has been replaced, then it should not be passed to flink:vkAcquireNextImage. * Add a valid usage statement to flink:vkCreateImageView, that the image must have been created with an appropriate usage bit set. * Noted that slink:VkDisplayPresentInfoKHR is a valid extension of slink:VkPresentInfoKHR in the <<wsi_swapchain,WSI Swapchain>> section. * Update valid usage for flink:vkCmdSetViewport and flink:vkCmdSetScissor to account for the multiple viewport feature. If the feature is not enabled, the parameters for these functions have required values that are defined in the <<features-features-multiViewport,multiple viewports>> section of the spec but were not reflected in the valid usage text for these functions. * Add the +<<VK_EXT_swapchain_colorspace>>+ extension defining common color spaces.
2017-01-18 04:11:25 +00:00
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
== File chapters/interfaces.txt
=== latexmath inline 4
Change log for February 10, 2017 Vulkan 1.0.40 spec update: * Bump API patch number and header version number to 40 for this update. * There is a major build change in this release. We are now using the Ruby-based ``asciidoctor'' implementation, rather than the Python-based ``asciidoc'' implementation, to process the specification. While the actual specification markup changes were minimal, this requires a new set of build tools and a very different installation process, especially because we now use an experimental direct-to-PDF backend for Asciidoctor instead of Docbook->dblatex->PDF. It is no longer possible to build the Specification using asciidoc. See doc/specs/vulkan/README.adoc for some guidance on installing the new toolchain components. * There are some minor rendering issues in the PDF output due to teething problems with the asciidoctor toolchain, especially with mathematical equations. We are aware of these and working on them. Github Issues: * Updated sample code for the <<sparsememory-examples-basic,sparse resource binding example>> (public issue 97). * Modify line and point clipping behavior in the <<vertexpostproc-clipping, Primitive Clipping>> section to allow for pop-free behavior. The ability to check for which behavior is implemented may be added a future feature or extension (public issue 113). * Unify the discussions of implicit ordering throughout the spec, in particular in the new sections <<drawing-primitive-order, Primitive Order>>, <<primrast-order, Rasterization Order>>, and <<synchronization-implicit, Implicit Synchronization Guarantees>>; the discussion of <<synchronization-submission-order, submission order>>; and references elsewhere to these sections (public issue 133). * Clarify \<\<descriptorsets-compatibility,Pipeline Layout Compatibility>> language and introduce the term ``identically defined'' (public issue 164). * Add a dependency to the +VK_EXT_debug_marker+ extension that's needed to reuse the object type enum from +VK_EXT_debug_report+, and moves the definition of that enum into +VK_EXT_debug_report+ where it should be (public issue 409). * Remove redundant valid usage statement from slink:VkImageBlit (public issue 421). * Update GL_KHR_vulkan_glsl to allow the ternary operator to result in a specialization constant (public issue 424). * Fix valid usage for flink:VkPipelineShaderStageCreateInfo (public issue 426). * Correct typo in New Objects list for <<VK_EXT_debug_report>> (public issue 447). Internal Issues: * Moved to asciidoctor for spec builds (internal issue 121). * Update style guide to describe where to put new extensions-specific asciidoc files, and what to name them (internal issue 626). * Add src/spec/indexExt.py to autogenerate registry index entries linking into the 1.0-extensions specification, instead of maintaining the index manually. (internal issue 642). * Autogenerate extension dependencies and lists of all extensions and all KHR extensions from the "supported" attributes in +vk.xml+. Execute +make config/extDependency.sh+ from +doc/specs/vulkan+ when a supported extension is added to vk.xml, to regenerate the dependency script. The consequence is that specifying a single extension to the +makeExt+ script will automatically enable all extensions it depends on as well, and that the +makeAllExts+ and +makeKHR+ scripts do not need to be updated when a new extension is supported (internal issue 648). * Put extension appendices all at the same asciidoc section level, so KHR WSI extensions show up in the HTML index (internal issue 648). Other Issues: * Imbed images in the generated HTML specs instead of loading them from the images/ directory. * Fix missing EXT in extension name (ename:VK_EXT_SWAPCHAIN_COLOR_SPACE_EXTENSION_NAME). * Add new +VK_EXT_SMPTE_2086_metadata+ extension. * In the <<platformCreateSurface_xlib,Xlib Surface>> section of the +VK_KHR_xlib_surface+ specification, add language warning users that they always need to call code:XinitThreads. * Use the term "presentable image" (rather than "swapchain image") consistently in +VK_KHR_swapchain+ and related extensions, and add a glossary term defining it. * Relocate the valid usage for samples of flink:vkGetPhysicalDeviceSparseImageFormatProperties2KHR::pname:pFormatInfo to be below the flink:VkPhysicalDeviceSparseImageFormatInfo2KHR structure.
2017-02-11 04:37:39 +00:00
latexmath:[(x,y,z,\frac{1}{w})]
Change log for January 23, 2017 Vulkan 1.0.39 spec update: * Bump API patch number and header version number to 39 for this update. Github Issues: * Clarified that only accesses via the specified buffer/image subresource ranges are included in the access scopes (public issue 306). * Add missing valid usage statements for flink:vkCreateComputePipelines and flink:vkCreateGraphicsPipelines (public issue 427). Internal Issues: * Add a Note to the <<invariance,Invariance>> appendix about a difference between OpenGL and Vulkan with regards to how primitives derived from offsets are handled (internal issue 355). * Add the +<<VK_KHR_get_physical_device_properties2>>+, +<<VK_KHR_maintenance1>>+, and +<<VK_KHR_shader_draw_parameters>>+ extensions (internal issue 448). * Add the +<<VK_EXT_shader_subgroup_vote>>+ and +<<VK_EXT_shader_subgroup_ballot>>+ extensions (internal issue 449). * Update the texture level-of-detail equation in the <<textures-scale-factor,Scale Factor Operation>> section to better approximate the ellipse major and minor axes (internal issue 547). * Forbid non-explicitly allowed uses of interface decorations in the introduction to the <<interfaces,Shader Interfaces>> chapter (internal issue 607). * Replace use of MathJax with KaTeX, for improved load-time performance as well as avoiding the scrolling-and-scrolling behavior due to MathJax asynchronous rendering when loading at an anchor inside the spec. This change also requires moving to HTML5 output for the spec instead of XHTML, and there is a visible difference in that the chapter navigation index is now in a scrollable sidebar instead of at the top of the document. We may or may not retain the nav sidebar based on feedback (internal issue 613). * Improve consistency of markup and formatting in extension appendices (internal issue 631). Other Issues: * Add explicit valid usage statements to slink:VkImageCopy requiring that the source and destination layer ranges be contained in their respective source and destination images. * Add valid usage language for swapchain of flink:vkAcquireNextImage. If the swapchain has been replaced, then it should not be passed to flink:vkAcquireNextImage. * Add a valid usage statement to flink:vkCreateImageView, that the image must have been created with an appropriate usage bit set. * Noted that slink:VkDisplayPresentInfoKHR is a valid extension of slink:VkPresentInfoKHR in the <<wsi_swapchain,WSI Swapchain>> section. * Update valid usage for flink:vkCmdSetViewport and flink:vkCmdSetScissor to account for the multiple viewport feature. If the feature is not enabled, the parameters for these functions have required values that are defined in the <<features-features-multiViewport,multiple viewports>> section of the spec but were not reflected in the valid usage text for these functions. * Add the +<<VK_EXT_swapchain_colorspace>>+ extension defining common color spaces.
2017-01-18 04:11:25 +00:00
=== latexmath inline 5
Change log for February 10, 2017 Vulkan 1.0.40 spec update: * Bump API patch number and header version number to 40 for this update. * There is a major build change in this release. We are now using the Ruby-based ``asciidoctor'' implementation, rather than the Python-based ``asciidoc'' implementation, to process the specification. While the actual specification markup changes were minimal, this requires a new set of build tools and a very different installation process, especially because we now use an experimental direct-to-PDF backend for Asciidoctor instead of Docbook->dblatex->PDF. It is no longer possible to build the Specification using asciidoc. See doc/specs/vulkan/README.adoc for some guidance on installing the new toolchain components. * There are some minor rendering issues in the PDF output due to teething problems with the asciidoctor toolchain, especially with mathematical equations. We are aware of these and working on them. Github Issues: * Updated sample code for the <<sparsememory-examples-basic,sparse resource binding example>> (public issue 97). * Modify line and point clipping behavior in the <<vertexpostproc-clipping, Primitive Clipping>> section to allow for pop-free behavior. The ability to check for which behavior is implemented may be added a future feature or extension (public issue 113). * Unify the discussions of implicit ordering throughout the spec, in particular in the new sections <<drawing-primitive-order, Primitive Order>>, <<primrast-order, Rasterization Order>>, and <<synchronization-implicit, Implicit Synchronization Guarantees>>; the discussion of <<synchronization-submission-order, submission order>>; and references elsewhere to these sections (public issue 133). * Clarify \<\<descriptorsets-compatibility,Pipeline Layout Compatibility>> language and introduce the term ``identically defined'' (public issue 164). * Add a dependency to the +VK_EXT_debug_marker+ extension that's needed to reuse the object type enum from +VK_EXT_debug_report+, and moves the definition of that enum into +VK_EXT_debug_report+ where it should be (public issue 409). * Remove redundant valid usage statement from slink:VkImageBlit (public issue 421). * Update GL_KHR_vulkan_glsl to allow the ternary operator to result in a specialization constant (public issue 424). * Fix valid usage for flink:VkPipelineShaderStageCreateInfo (public issue 426). * Correct typo in New Objects list for <<VK_EXT_debug_report>> (public issue 447). Internal Issues: * Moved to asciidoctor for spec builds (internal issue 121). * Update style guide to describe where to put new extensions-specific asciidoc files, and what to name them (internal issue 626). * Add src/spec/indexExt.py to autogenerate registry index entries linking into the 1.0-extensions specification, instead of maintaining the index manually. (internal issue 642). * Autogenerate extension dependencies and lists of all extensions and all KHR extensions from the "supported" attributes in +vk.xml+. Execute +make config/extDependency.sh+ from +doc/specs/vulkan+ when a supported extension is added to vk.xml, to regenerate the dependency script. The consequence is that specifying a single extension to the +makeExt+ script will automatically enable all extensions it depends on as well, and that the +makeAllExts+ and +makeKHR+ scripts do not need to be updated when a new extension is supported (internal issue 648). * Put extension appendices all at the same asciidoc section level, so KHR WSI extensions show up in the HTML index (internal issue 648). Other Issues: * Imbed images in the generated HTML specs instead of loading them from the images/ directory. * Fix missing EXT in extension name (ename:VK_EXT_SWAPCHAIN_COLOR_SPACE_EXTENSION_NAME). * Add new +VK_EXT_SMPTE_2086_metadata+ extension. * In the <<platformCreateSurface_xlib,Xlib Surface>> section of the +VK_KHR_xlib_surface+ specification, add language warning users that they always need to call code:XinitThreads. * Use the term "presentable image" (rather than "swapchain image") consistently in +VK_KHR_swapchain+ and related extensions, and add a glossary term defining it. * Relocate the valid usage for samples of flink:vkGetPhysicalDeviceSparseImageFormatProperties2KHR::pname:pFormatInfo to be below the flink:VkPhysicalDeviceSparseImageFormatInfo2KHR structure.
2017-02-11 04:37:39 +00:00
latexmath:[\frac{1}{w}].
Change log for January 23, 2017 Vulkan 1.0.39 spec update: * Bump API patch number and header version number to 39 for this update. Github Issues: * Clarified that only accesses via the specified buffer/image subresource ranges are included in the access scopes (public issue 306). * Add missing valid usage statements for flink:vkCreateComputePipelines and flink:vkCreateGraphicsPipelines (public issue 427). Internal Issues: * Add a Note to the <<invariance,Invariance>> appendix about a difference between OpenGL and Vulkan with regards to how primitives derived from offsets are handled (internal issue 355). * Add the +<<VK_KHR_get_physical_device_properties2>>+, +<<VK_KHR_maintenance1>>+, and +<<VK_KHR_shader_draw_parameters>>+ extensions (internal issue 448). * Add the +<<VK_EXT_shader_subgroup_vote>>+ and +<<VK_EXT_shader_subgroup_ballot>>+ extensions (internal issue 449). * Update the texture level-of-detail equation in the <<textures-scale-factor,Scale Factor Operation>> section to better approximate the ellipse major and minor axes (internal issue 547). * Forbid non-explicitly allowed uses of interface decorations in the introduction to the <<interfaces,Shader Interfaces>> chapter (internal issue 607). * Replace use of MathJax with KaTeX, for improved load-time performance as well as avoiding the scrolling-and-scrolling behavior due to MathJax asynchronous rendering when loading at an anchor inside the spec. This change also requires moving to HTML5 output for the spec instead of XHTML, and there is a visible difference in that the chapter navigation index is now in a scrollable sidebar instead of at the top of the document. We may or may not retain the nav sidebar based on feedback (internal issue 613). * Improve consistency of markup and formatting in extension appendices (internal issue 631). Other Issues: * Add explicit valid usage statements to slink:VkImageCopy requiring that the source and destination layer ranges be contained in their respective source and destination images. * Add valid usage language for swapchain of flink:vkAcquireNextImage. If the swapchain has been replaced, then it should not be passed to flink:vkAcquireNextImage. * Add a valid usage statement to flink:vkCreateImageView, that the image must have been created with an appropriate usage bit set. * Noted that slink:VkDisplayPresentInfoKHR is a valid extension of slink:VkPresentInfoKHR in the <<wsi_swapchain,WSI Swapchain>> section. * Update valid usage for flink:vkCmdSetViewport and flink:vkCmdSetScissor to account for the multiple viewport feature. If the feature is not enabled, the parameters for these functions have required values that are defined in the <<features-features-multiViewport,multiple viewports>> section of the spec but were not reflected in the valid usage text for these functions. * Add the +<<VK_EXT_swapchain_colorspace>>+ extension defining common color spaces.
2017-01-18 04:11:25 +00:00
== File chapters/primsrast.txt
=== latexmath block 11
[latexmath]
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Change log for February 10, 2017 Vulkan 1.0.40 spec update: * Bump API patch number and header version number to 40 for this update. * There is a major build change in this release. We are now using the Ruby-based ``asciidoctor'' implementation, rather than the Python-based ``asciidoc'' implementation, to process the specification. While the actual specification markup changes were minimal, this requires a new set of build tools and a very different installation process, especially because we now use an experimental direct-to-PDF backend for Asciidoctor instead of Docbook->dblatex->PDF. It is no longer possible to build the Specification using asciidoc. See doc/specs/vulkan/README.adoc for some guidance on installing the new toolchain components. * There are some minor rendering issues in the PDF output due to teething problems with the asciidoctor toolchain, especially with mathematical equations. We are aware of these and working on them. Github Issues: * Updated sample code for the <<sparsememory-examples-basic,sparse resource binding example>> (public issue 97). * Modify line and point clipping behavior in the <<vertexpostproc-clipping, Primitive Clipping>> section to allow for pop-free behavior. The ability to check for which behavior is implemented may be added a future feature or extension (public issue 113). * Unify the discussions of implicit ordering throughout the spec, in particular in the new sections <<drawing-primitive-order, Primitive Order>>, <<primrast-order, Rasterization Order>>, and <<synchronization-implicit, Implicit Synchronization Guarantees>>; the discussion of <<synchronization-submission-order, submission order>>; and references elsewhere to these sections (public issue 133). * Clarify \<\<descriptorsets-compatibility,Pipeline Layout Compatibility>> language and introduce the term ``identically defined'' (public issue 164). * Add a dependency to the +VK_EXT_debug_marker+ extension that's needed to reuse the object type enum from +VK_EXT_debug_report+, and moves the definition of that enum into +VK_EXT_debug_report+ where it should be (public issue 409). * Remove redundant valid usage statement from slink:VkImageBlit (public issue 421). * Update GL_KHR_vulkan_glsl to allow the ternary operator to result in a specialization constant (public issue 424). * Fix valid usage for flink:VkPipelineShaderStageCreateInfo (public issue 426). * Correct typo in New Objects list for <<VK_EXT_debug_report>> (public issue 447). Internal Issues: * Moved to asciidoctor for spec builds (internal issue 121). * Update style guide to describe where to put new extensions-specific asciidoc files, and what to name them (internal issue 626). * Add src/spec/indexExt.py to autogenerate registry index entries linking into the 1.0-extensions specification, instead of maintaining the index manually. (internal issue 642). * Autogenerate extension dependencies and lists of all extensions and all KHR extensions from the "supported" attributes in +vk.xml+. Execute +make config/extDependency.sh+ from +doc/specs/vulkan+ when a supported extension is added to vk.xml, to regenerate the dependency script. The consequence is that specifying a single extension to the +makeExt+ script will automatically enable all extensions it depends on as well, and that the +makeAllExts+ and +makeKHR+ scripts do not need to be updated when a new extension is supported (internal issue 648). * Put extension appendices all at the same asciidoc section level, so KHR WSI extensions show up in the HTML index (internal issue 648). Other Issues: * Imbed images in the generated HTML specs instead of loading them from the images/ directory. * Fix missing EXT in extension name (ename:VK_EXT_SWAPCHAIN_COLOR_SPACE_EXTENSION_NAME). * Add new +VK_EXT_SMPTE_2086_metadata+ extension. * In the <<platformCreateSurface_xlib,Xlib Surface>> section of the +VK_KHR_xlib_surface+ specification, add language warning users that they always need to call code:XinitThreads. * Use the term "presentable image" (rather than "swapchain image") consistently in +VK_KHR_swapchain+ and related extensions, and add a glossary term defining it. * Relocate the valid usage for samples of flink:vkGetPhysicalDeviceSparseImageFormatProperties2KHR::pname:pFormatInfo to be below the flink:VkPhysicalDeviceSparseImageFormatInfo2KHR structure.
2017-02-11 04:37:39 +00:00
s = {1 \over 2} + { \left( x_p - x_f \right) \over \text{size} }
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
[latexmath]
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
t = {1 \over 2} + { \left( y_p - y_f \right) \over \text{size} }
Change log for January 23, 2017 Vulkan 1.0.39 spec update: * Bump API patch number and header version number to 39 for this update. Github Issues: * Clarified that only accesses via the specified buffer/image subresource ranges are included in the access scopes (public issue 306). * Add missing valid usage statements for flink:vkCreateComputePipelines and flink:vkCreateGraphicsPipelines (public issue 427). Internal Issues: * Add a Note to the <<invariance,Invariance>> appendix about a difference between OpenGL and Vulkan with regards to how primitives derived from offsets are handled (internal issue 355). * Add the +<<VK_KHR_get_physical_device_properties2>>+, +<<VK_KHR_maintenance1>>+, and +<<VK_KHR_shader_draw_parameters>>+ extensions (internal issue 448). * Add the +<<VK_EXT_shader_subgroup_vote>>+ and +<<VK_EXT_shader_subgroup_ballot>>+ extensions (internal issue 449). * Update the texture level-of-detail equation in the <<textures-scale-factor,Scale Factor Operation>> section to better approximate the ellipse major and minor axes (internal issue 547). * Forbid non-explicitly allowed uses of interface decorations in the introduction to the <<interfaces,Shader Interfaces>> chapter (internal issue 607). * Replace use of MathJax with KaTeX, for improved load-time performance as well as avoiding the scrolling-and-scrolling behavior due to MathJax asynchronous rendering when loading at an anchor inside the spec. This change also requires moving to HTML5 output for the spec instead of XHTML, and there is a visible difference in that the chapter navigation index is now in a scrollable sidebar instead of at the top of the document. We may or may not retain the nav sidebar based on feedback (internal issue 613). * Improve consistency of markup and formatting in extension appendices (internal issue 631). Other Issues: * Add explicit valid usage statements to slink:VkImageCopy requiring that the source and destination layer ranges be contained in their respective source and destination images. * Add valid usage language for swapchain of flink:vkAcquireNextImage. If the swapchain has been replaced, then it should not be passed to flink:vkAcquireNextImage. * Add a valid usage statement to flink:vkCreateImageView, that the image must have been created with an appropriate usage bit set. * Noted that slink:VkDisplayPresentInfoKHR is a valid extension of slink:VkPresentInfoKHR in the <<wsi_swapchain,WSI Swapchain>> section. * Update valid usage for flink:vkCmdSetViewport and flink:vkCmdSetScissor to account for the multiple viewport feature. If the feature is not enabled, the parameters for these functions have required values that are defined in the <<features-features-multiViewport,multiple viewports>> section of the spec but were not reflected in the valid usage text for these functions. * Add the +<<VK_EXT_swapchain_colorspace>>+ extension defining common color spaces.
2017-01-18 04:11:25 +00:00
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
=== latexmath block 12
[latexmath]
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Change log for February 10, 2017 Vulkan 1.0.40 spec update: * Bump API patch number and header version number to 40 for this update. * There is a major build change in this release. We are now using the Ruby-based ``asciidoctor'' implementation, rather than the Python-based ``asciidoc'' implementation, to process the specification. While the actual specification markup changes were minimal, this requires a new set of build tools and a very different installation process, especially because we now use an experimental direct-to-PDF backend for Asciidoctor instead of Docbook->dblatex->PDF. It is no longer possible to build the Specification using asciidoc. See doc/specs/vulkan/README.adoc for some guidance on installing the new toolchain components. * There are some minor rendering issues in the PDF output due to teething problems with the asciidoctor toolchain, especially with mathematical equations. We are aware of these and working on them. Github Issues: * Updated sample code for the <<sparsememory-examples-basic,sparse resource binding example>> (public issue 97). * Modify line and point clipping behavior in the <<vertexpostproc-clipping, Primitive Clipping>> section to allow for pop-free behavior. The ability to check for which behavior is implemented may be added a future feature or extension (public issue 113). * Unify the discussions of implicit ordering throughout the spec, in particular in the new sections <<drawing-primitive-order, Primitive Order>>, <<primrast-order, Rasterization Order>>, and <<synchronization-implicit, Implicit Synchronization Guarantees>>; the discussion of <<synchronization-submission-order, submission order>>; and references elsewhere to these sections (public issue 133). * Clarify \<\<descriptorsets-compatibility,Pipeline Layout Compatibility>> language and introduce the term ``identically defined'' (public issue 164). * Add a dependency to the +VK_EXT_debug_marker+ extension that's needed to reuse the object type enum from +VK_EXT_debug_report+, and moves the definition of that enum into +VK_EXT_debug_report+ where it should be (public issue 409). * Remove redundant valid usage statement from slink:VkImageBlit (public issue 421). * Update GL_KHR_vulkan_glsl to allow the ternary operator to result in a specialization constant (public issue 424). * Fix valid usage for flink:VkPipelineShaderStageCreateInfo (public issue 426). * Correct typo in New Objects list for <<VK_EXT_debug_report>> (public issue 447). Internal Issues: * Moved to asciidoctor for spec builds (internal issue 121). * Update style guide to describe where to put new extensions-specific asciidoc files, and what to name them (internal issue 626). * Add src/spec/indexExt.py to autogenerate registry index entries linking into the 1.0-extensions specification, instead of maintaining the index manually. (internal issue 642). * Autogenerate extension dependencies and lists of all extensions and all KHR extensions from the "supported" attributes in +vk.xml+. Execute +make config/extDependency.sh+ from +doc/specs/vulkan+ when a supported extension is added to vk.xml, to regenerate the dependency script. The consequence is that specifying a single extension to the +makeExt+ script will automatically enable all extensions it depends on as well, and that the +makeAllExts+ and +makeKHR+ scripts do not need to be updated when a new extension is supported (internal issue 648). * Put extension appendices all at the same asciidoc section level, so KHR WSI extensions show up in the HTML index (internal issue 648). Other Issues: * Imbed images in the generated HTML specs instead of loading them from the images/ directory. * Fix missing EXT in extension name (ename:VK_EXT_SWAPCHAIN_COLOR_SPACE_EXTENSION_NAME). * Add new +VK_EXT_SMPTE_2086_metadata+ extension. * In the <<platformCreateSurface_xlib,Xlib Surface>> section of the +VK_KHR_xlib_surface+ specification, add language warning users that they always need to call code:XinitThreads. * Use the term "presentable image" (rather than "swapchain image") consistently in +VK_KHR_swapchain+ and related extensions, and add a glossary term defining it. * Relocate the valid usage for samples of flink:vkGetPhysicalDeviceSparseImageFormatProperties2KHR::pname:pFormatInfo to be below the flink:VkPhysicalDeviceSparseImageFormatInfo2KHR structure.
2017-02-11 04:37:39 +00:00
t = {{( \mathbf{p}_r - \mathbf{p}_a ) \cdot ( \mathbf{p}_b - \mathbf{p}_a )}
\over {\| \mathbf{p}_b - \mathbf{p}_a \|^2 }}
Change log for January 23, 2017 Vulkan 1.0.39 spec update: * Bump API patch number and header version number to 39 for this update. Github Issues: * Clarified that only accesses via the specified buffer/image subresource ranges are included in the access scopes (public issue 306). * Add missing valid usage statements for flink:vkCreateComputePipelines and flink:vkCreateGraphicsPipelines (public issue 427). Internal Issues: * Add a Note to the <<invariance,Invariance>> appendix about a difference between OpenGL and Vulkan with regards to how primitives derived from offsets are handled (internal issue 355). * Add the +<<VK_KHR_get_physical_device_properties2>>+, +<<VK_KHR_maintenance1>>+, and +<<VK_KHR_shader_draw_parameters>>+ extensions (internal issue 448). * Add the +<<VK_EXT_shader_subgroup_vote>>+ and +<<VK_EXT_shader_subgroup_ballot>>+ extensions (internal issue 449). * Update the texture level-of-detail equation in the <<textures-scale-factor,Scale Factor Operation>> section to better approximate the ellipse major and minor axes (internal issue 547). * Forbid non-explicitly allowed uses of interface decorations in the introduction to the <<interfaces,Shader Interfaces>> chapter (internal issue 607). * Replace use of MathJax with KaTeX, for improved load-time performance as well as avoiding the scrolling-and-scrolling behavior due to MathJax asynchronous rendering when loading at an anchor inside the spec. This change also requires moving to HTML5 output for the spec instead of XHTML, and there is a visible difference in that the chapter navigation index is now in a scrollable sidebar instead of at the top of the document. We may or may not retain the nav sidebar based on feedback (internal issue 613). * Improve consistency of markup and formatting in extension appendices (internal issue 631). Other Issues: * Add explicit valid usage statements to slink:VkImageCopy requiring that the source and destination layer ranges be contained in their respective source and destination images. * Add valid usage language for swapchain of flink:vkAcquireNextImage. If the swapchain has been replaced, then it should not be passed to flink:vkAcquireNextImage. * Add a valid usage statement to flink:vkCreateImageView, that the image must have been created with an appropriate usage bit set. * Noted that slink:VkDisplayPresentInfoKHR is a valid extension of slink:VkPresentInfoKHR in the <<wsi_swapchain,WSI Swapchain>> section. * Update valid usage for flink:vkCmdSetViewport and flink:vkCmdSetScissor to account for the multiple viewport feature. If the feature is not enabled, the parameters for these functions have required values that are defined in the <<features-features-multiViewport,multiple viewports>> section of the spec but were not reflected in the valid usage text for these functions. * Add the +<<VK_EXT_swapchain_colorspace>>+ extension defining common color spaces.
2017-01-18 04:11:25 +00:00
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
=== latexmath block 13
[latexmath]
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Change log for February 10, 2017 Vulkan 1.0.40 spec update: * Bump API patch number and header version number to 40 for this update. * There is a major build change in this release. We are now using the Ruby-based ``asciidoctor'' implementation, rather than the Python-based ``asciidoc'' implementation, to process the specification. While the actual specification markup changes were minimal, this requires a new set of build tools and a very different installation process, especially because we now use an experimental direct-to-PDF backend for Asciidoctor instead of Docbook->dblatex->PDF. It is no longer possible to build the Specification using asciidoc. See doc/specs/vulkan/README.adoc for some guidance on installing the new toolchain components. * There are some minor rendering issues in the PDF output due to teething problems with the asciidoctor toolchain, especially with mathematical equations. We are aware of these and working on them. Github Issues: * Updated sample code for the <<sparsememory-examples-basic,sparse resource binding example>> (public issue 97). * Modify line and point clipping behavior in the <<vertexpostproc-clipping, Primitive Clipping>> section to allow for pop-free behavior. The ability to check for which behavior is implemented may be added a future feature or extension (public issue 113). * Unify the discussions of implicit ordering throughout the spec, in particular in the new sections <<drawing-primitive-order, Primitive Order>>, <<primrast-order, Rasterization Order>>, and <<synchronization-implicit, Implicit Synchronization Guarantees>>; the discussion of <<synchronization-submission-order, submission order>>; and references elsewhere to these sections (public issue 133). * Clarify \<\<descriptorsets-compatibility,Pipeline Layout Compatibility>> language and introduce the term ``identically defined'' (public issue 164). * Add a dependency to the +VK_EXT_debug_marker+ extension that's needed to reuse the object type enum from +VK_EXT_debug_report+, and moves the definition of that enum into +VK_EXT_debug_report+ where it should be (public issue 409). * Remove redundant valid usage statement from slink:VkImageBlit (public issue 421). * Update GL_KHR_vulkan_glsl to allow the ternary operator to result in a specialization constant (public issue 424). * Fix valid usage for flink:VkPipelineShaderStageCreateInfo (public issue 426). * Correct typo in New Objects list for <<VK_EXT_debug_report>> (public issue 447). Internal Issues: * Moved to asciidoctor for spec builds (internal issue 121). * Update style guide to describe where to put new extensions-specific asciidoc files, and what to name them (internal issue 626). * Add src/spec/indexExt.py to autogenerate registry index entries linking into the 1.0-extensions specification, instead of maintaining the index manually. (internal issue 642). * Autogenerate extension dependencies and lists of all extensions and all KHR extensions from the "supported" attributes in +vk.xml+. Execute +make config/extDependency.sh+ from +doc/specs/vulkan+ when a supported extension is added to vk.xml, to regenerate the dependency script. The consequence is that specifying a single extension to the +makeExt+ script will automatically enable all extensions it depends on as well, and that the +makeAllExts+ and +makeKHR+ scripts do not need to be updated when a new extension is supported (internal issue 648). * Put extension appendices all at the same asciidoc section level, so KHR WSI extensions show up in the HTML index (internal issue 648). Other Issues: * Imbed images in the generated HTML specs instead of loading them from the images/ directory. * Fix missing EXT in extension name (ename:VK_EXT_SWAPCHAIN_COLOR_SPACE_EXTENSION_NAME). * Add new +VK_EXT_SMPTE_2086_metadata+ extension. * In the <<platformCreateSurface_xlib,Xlib Surface>> section of the +VK_KHR_xlib_surface+ specification, add language warning users that they always need to call code:XinitThreads. * Use the term "presentable image" (rather than "swapchain image") consistently in +VK_KHR_swapchain+ and related extensions, and add a glossary term defining it. * Relocate the valid usage for samples of flink:vkGetPhysicalDeviceSparseImageFormatProperties2KHR::pname:pFormatInfo to be below the flink:VkPhysicalDeviceSparseImageFormatInfo2KHR structure.
2017-02-11 04:37:39 +00:00
f = {{ (1-t) {f_a / w_a} + t { f_b / w_b} } \over
{(1-t) / w_a + t / w_b }}
Change log for January 23, 2017 Vulkan 1.0.39 spec update: * Bump API patch number and header version number to 39 for this update. Github Issues: * Clarified that only accesses via the specified buffer/image subresource ranges are included in the access scopes (public issue 306). * Add missing valid usage statements for flink:vkCreateComputePipelines and flink:vkCreateGraphicsPipelines (public issue 427). Internal Issues: * Add a Note to the <<invariance,Invariance>> appendix about a difference between OpenGL and Vulkan with regards to how primitives derived from offsets are handled (internal issue 355). * Add the +<<VK_KHR_get_physical_device_properties2>>+, +<<VK_KHR_maintenance1>>+, and +<<VK_KHR_shader_draw_parameters>>+ extensions (internal issue 448). * Add the +<<VK_EXT_shader_subgroup_vote>>+ and +<<VK_EXT_shader_subgroup_ballot>>+ extensions (internal issue 449). * Update the texture level-of-detail equation in the <<textures-scale-factor,Scale Factor Operation>> section to better approximate the ellipse major and minor axes (internal issue 547). * Forbid non-explicitly allowed uses of interface decorations in the introduction to the <<interfaces,Shader Interfaces>> chapter (internal issue 607). * Replace use of MathJax with KaTeX, for improved load-time performance as well as avoiding the scrolling-and-scrolling behavior due to MathJax asynchronous rendering when loading at an anchor inside the spec. This change also requires moving to HTML5 output for the spec instead of XHTML, and there is a visible difference in that the chapter navigation index is now in a scrollable sidebar instead of at the top of the document. We may or may not retain the nav sidebar based on feedback (internal issue 613). * Improve consistency of markup and formatting in extension appendices (internal issue 631). Other Issues: * Add explicit valid usage statements to slink:VkImageCopy requiring that the source and destination layer ranges be contained in their respective source and destination images. * Add valid usage language for swapchain of flink:vkAcquireNextImage. If the swapchain has been replaced, then it should not be passed to flink:vkAcquireNextImage. * Add a valid usage statement to flink:vkCreateImageView, that the image must have been created with an appropriate usage bit set. * Noted that slink:VkDisplayPresentInfoKHR is a valid extension of slink:VkPresentInfoKHR in the <<wsi_swapchain,WSI Swapchain>> section. * Update valid usage for flink:vkCmdSetViewport and flink:vkCmdSetScissor to account for the multiple viewport feature. If the feature is not enabled, the parameters for these functions have required values that are defined in the <<features-features-multiViewport,multiple viewports>> section of the spec but were not reflected in the valid usage text for these functions. * Add the +<<VK_EXT_swapchain_colorspace>>+ extension defining common color spaces.
2017-01-18 04:11:25 +00:00
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
=== latexmath block 14
[latexmath]
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Change log for February 10, 2017 Vulkan 1.0.40 spec update: * Bump API patch number and header version number to 40 for this update. * There is a major build change in this release. We are now using the Ruby-based ``asciidoctor'' implementation, rather than the Python-based ``asciidoc'' implementation, to process the specification. While the actual specification markup changes were minimal, this requires a new set of build tools and a very different installation process, especially because we now use an experimental direct-to-PDF backend for Asciidoctor instead of Docbook->dblatex->PDF. It is no longer possible to build the Specification using asciidoc. See doc/specs/vulkan/README.adoc for some guidance on installing the new toolchain components. * There are some minor rendering issues in the PDF output due to teething problems with the asciidoctor toolchain, especially with mathematical equations. We are aware of these and working on them. Github Issues: * Updated sample code for the <<sparsememory-examples-basic,sparse resource binding example>> (public issue 97). * Modify line and point clipping behavior in the <<vertexpostproc-clipping, Primitive Clipping>> section to allow for pop-free behavior. The ability to check for which behavior is implemented may be added a future feature or extension (public issue 113). * Unify the discussions of implicit ordering throughout the spec, in particular in the new sections <<drawing-primitive-order, Primitive Order>>, <<primrast-order, Rasterization Order>>, and <<synchronization-implicit, Implicit Synchronization Guarantees>>; the discussion of <<synchronization-submission-order, submission order>>; and references elsewhere to these sections (public issue 133). * Clarify \<\<descriptorsets-compatibility,Pipeline Layout Compatibility>> language and introduce the term ``identically defined'' (public issue 164). * Add a dependency to the +VK_EXT_debug_marker+ extension that's needed to reuse the object type enum from +VK_EXT_debug_report+, and moves the definition of that enum into +VK_EXT_debug_report+ where it should be (public issue 409). * Remove redundant valid usage statement from slink:VkImageBlit (public issue 421). * Update GL_KHR_vulkan_glsl to allow the ternary operator to result in a specialization constant (public issue 424). * Fix valid usage for flink:VkPipelineShaderStageCreateInfo (public issue 426). * Correct typo in New Objects list for <<VK_EXT_debug_report>> (public issue 447). Internal Issues: * Moved to asciidoctor for spec builds (internal issue 121). * Update style guide to describe where to put new extensions-specific asciidoc files, and what to name them (internal issue 626). * Add src/spec/indexExt.py to autogenerate registry index entries linking into the 1.0-extensions specification, instead of maintaining the index manually. (internal issue 642). * Autogenerate extension dependencies and lists of all extensions and all KHR extensions from the "supported" attributes in +vk.xml+. Execute +make config/extDependency.sh+ from +doc/specs/vulkan+ when a supported extension is added to vk.xml, to regenerate the dependency script. The consequence is that specifying a single extension to the +makeExt+ script will automatically enable all extensions it depends on as well, and that the +makeAllExts+ and +makeKHR+ scripts do not need to be updated when a new extension is supported (internal issue 648). * Put extension appendices all at the same asciidoc section level, so KHR WSI extensions show up in the HTML index (internal issue 648). Other Issues: * Imbed images in the generated HTML specs instead of loading them from the images/ directory. * Fix missing EXT in extension name (ename:VK_EXT_SWAPCHAIN_COLOR_SPACE_EXTENSION_NAME). * Add new +VK_EXT_SMPTE_2086_metadata+ extension. * In the <<platformCreateSurface_xlib,Xlib Surface>> section of the +VK_KHR_xlib_surface+ specification, add language warning users that they always need to call code:XinitThreads. * Use the term "presentable image" (rather than "swapchain image") consistently in +VK_KHR_swapchain+ and related extensions, and add a glossary term defining it. * Relocate the valid usage for samples of flink:vkGetPhysicalDeviceSparseImageFormatProperties2KHR::pname:pFormatInfo to be below the flink:VkPhysicalDeviceSparseImageFormatInfo2KHR structure.
2017-02-11 04:37:39 +00:00
a = -{1 \over 2}\sum_{i=0}^{n-1}
x_f^i y_f^{i \oplus 1} -
x_f^{i \oplus 1} y_f^i
Change log for January 23, 2017 Vulkan 1.0.39 spec update: * Bump API patch number and header version number to 39 for this update. Github Issues: * Clarified that only accesses via the specified buffer/image subresource ranges are included in the access scopes (public issue 306). * Add missing valid usage statements for flink:vkCreateComputePipelines and flink:vkCreateGraphicsPipelines (public issue 427). Internal Issues: * Add a Note to the <<invariance,Invariance>> appendix about a difference between OpenGL and Vulkan with regards to how primitives derived from offsets are handled (internal issue 355). * Add the +<<VK_KHR_get_physical_device_properties2>>+, +<<VK_KHR_maintenance1>>+, and +<<VK_KHR_shader_draw_parameters>>+ extensions (internal issue 448). * Add the +<<VK_EXT_shader_subgroup_vote>>+ and +<<VK_EXT_shader_subgroup_ballot>>+ extensions (internal issue 449). * Update the texture level-of-detail equation in the <<textures-scale-factor,Scale Factor Operation>> section to better approximate the ellipse major and minor axes (internal issue 547). * Forbid non-explicitly allowed uses of interface decorations in the introduction to the <<interfaces,Shader Interfaces>> chapter (internal issue 607). * Replace use of MathJax with KaTeX, for improved load-time performance as well as avoiding the scrolling-and-scrolling behavior due to MathJax asynchronous rendering when loading at an anchor inside the spec. This change also requires moving to HTML5 output for the spec instead of XHTML, and there is a visible difference in that the chapter navigation index is now in a scrollable sidebar instead of at the top of the document. We may or may not retain the nav sidebar based on feedback (internal issue 613). * Improve consistency of markup and formatting in extension appendices (internal issue 631). Other Issues: * Add explicit valid usage statements to slink:VkImageCopy requiring that the source and destination layer ranges be contained in their respective source and destination images. * Add valid usage language for swapchain of flink:vkAcquireNextImage. If the swapchain has been replaced, then it should not be passed to flink:vkAcquireNextImage. * Add a valid usage statement to flink:vkCreateImageView, that the image must have been created with an appropriate usage bit set. * Noted that slink:VkDisplayPresentInfoKHR is a valid extension of slink:VkPresentInfoKHR in the <<wsi_swapchain,WSI Swapchain>> section. * Update valid usage for flink:vkCmdSetViewport and flink:vkCmdSetScissor to account for the multiple viewport feature. If the feature is not enabled, the parameters for these functions have required values that are defined in the <<features-features-multiViewport,multiple viewports>> section of the spec but were not reflected in the valid usage text for these functions. * Add the +<<VK_EXT_swapchain_colorspace>>+ extension defining common color spaces.
2017-01-18 04:11:25 +00:00
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
=== latexmath inline 6
Change log for February 10, 2017 Vulkan 1.0.40 spec update: * Bump API patch number and header version number to 40 for this update. * There is a major build change in this release. We are now using the Ruby-based ``asciidoctor'' implementation, rather than the Python-based ``asciidoc'' implementation, to process the specification. While the actual specification markup changes were minimal, this requires a new set of build tools and a very different installation process, especially because we now use an experimental direct-to-PDF backend for Asciidoctor instead of Docbook->dblatex->PDF. It is no longer possible to build the Specification using asciidoc. See doc/specs/vulkan/README.adoc for some guidance on installing the new toolchain components. * There are some minor rendering issues in the PDF output due to teething problems with the asciidoctor toolchain, especially with mathematical equations. We are aware of these and working on them. Github Issues: * Updated sample code for the <<sparsememory-examples-basic,sparse resource binding example>> (public issue 97). * Modify line and point clipping behavior in the <<vertexpostproc-clipping, Primitive Clipping>> section to allow for pop-free behavior. The ability to check for which behavior is implemented may be added a future feature or extension (public issue 113). * Unify the discussions of implicit ordering throughout the spec, in particular in the new sections <<drawing-primitive-order, Primitive Order>>, <<primrast-order, Rasterization Order>>, and <<synchronization-implicit, Implicit Synchronization Guarantees>>; the discussion of <<synchronization-submission-order, submission order>>; and references elsewhere to these sections (public issue 133). * Clarify \<\<descriptorsets-compatibility,Pipeline Layout Compatibility>> language and introduce the term ``identically defined'' (public issue 164). * Add a dependency to the +VK_EXT_debug_marker+ extension that's needed to reuse the object type enum from +VK_EXT_debug_report+, and moves the definition of that enum into +VK_EXT_debug_report+ where it should be (public issue 409). * Remove redundant valid usage statement from slink:VkImageBlit (public issue 421). * Update GL_KHR_vulkan_glsl to allow the ternary operator to result in a specialization constant (public issue 424). * Fix valid usage for flink:VkPipelineShaderStageCreateInfo (public issue 426). * Correct typo in New Objects list for <<VK_EXT_debug_report>> (public issue 447). Internal Issues: * Moved to asciidoctor for spec builds (internal issue 121). * Update style guide to describe where to put new extensions-specific asciidoc files, and what to name them (internal issue 626). * Add src/spec/indexExt.py to autogenerate registry index entries linking into the 1.0-extensions specification, instead of maintaining the index manually. (internal issue 642). * Autogenerate extension dependencies and lists of all extensions and all KHR extensions from the "supported" attributes in +vk.xml+. Execute +make config/extDependency.sh+ from +doc/specs/vulkan+ when a supported extension is added to vk.xml, to regenerate the dependency script. The consequence is that specifying a single extension to the +makeExt+ script will automatically enable all extensions it depends on as well, and that the +makeAllExts+ and +makeKHR+ scripts do not need to be updated when a new extension is supported (internal issue 648). * Put extension appendices all at the same asciidoc section level, so KHR WSI extensions show up in the HTML index (internal issue 648). Other Issues: * Imbed images in the generated HTML specs instead of loading them from the images/ directory. * Fix missing EXT in extension name (ename:VK_EXT_SWAPCHAIN_COLOR_SPACE_EXTENSION_NAME). * Add new +VK_EXT_SMPTE_2086_metadata+ extension. * In the <<platformCreateSurface_xlib,Xlib Surface>> section of the +VK_KHR_xlib_surface+ specification, add language warning users that they always need to call code:XinitThreads. * Use the term "presentable image" (rather than "swapchain image") consistently in +VK_KHR_swapchain+ and related extensions, and add a glossary term defining it. * Relocate the valid usage for samples of flink:vkGetPhysicalDeviceSparseImageFormatProperties2KHR::pname:pFormatInfo to be below the flink:VkPhysicalDeviceSparseImageFormatInfo2KHR structure.
2017-02-11 04:37:39 +00:00
latexmath:[x_f^i] and latexmath:[y_f^i]
Change log for January 23, 2017 Vulkan 1.0.39 spec update: * Bump API patch number and header version number to 39 for this update. Github Issues: * Clarified that only accesses via the specified buffer/image subresource ranges are included in the access scopes (public issue 306). * Add missing valid usage statements for flink:vkCreateComputePipelines and flink:vkCreateGraphicsPipelines (public issue 427). Internal Issues: * Add a Note to the <<invariance,Invariance>> appendix about a difference between OpenGL and Vulkan with regards to how primitives derived from offsets are handled (internal issue 355). * Add the +<<VK_KHR_get_physical_device_properties2>>+, +<<VK_KHR_maintenance1>>+, and +<<VK_KHR_shader_draw_parameters>>+ extensions (internal issue 448). * Add the +<<VK_EXT_shader_subgroup_vote>>+ and +<<VK_EXT_shader_subgroup_ballot>>+ extensions (internal issue 449). * Update the texture level-of-detail equation in the <<textures-scale-factor,Scale Factor Operation>> section to better approximate the ellipse major and minor axes (internal issue 547). * Forbid non-explicitly allowed uses of interface decorations in the introduction to the <<interfaces,Shader Interfaces>> chapter (internal issue 607). * Replace use of MathJax with KaTeX, for improved load-time performance as well as avoiding the scrolling-and-scrolling behavior due to MathJax asynchronous rendering when loading at an anchor inside the spec. This change also requires moving to HTML5 output for the spec instead of XHTML, and there is a visible difference in that the chapter navigation index is now in a scrollable sidebar instead of at the top of the document. We may or may not retain the nav sidebar based on feedback (internal issue 613). * Improve consistency of markup and formatting in extension appendices (internal issue 631). Other Issues: * Add explicit valid usage statements to slink:VkImageCopy requiring that the source and destination layer ranges be contained in their respective source and destination images. * Add valid usage language for swapchain of flink:vkAcquireNextImage. If the swapchain has been replaced, then it should not be passed to flink:vkAcquireNextImage. * Add a valid usage statement to flink:vkCreateImageView, that the image must have been created with an appropriate usage bit set. * Noted that slink:VkDisplayPresentInfoKHR is a valid extension of slink:VkPresentInfoKHR in the <<wsi_swapchain,WSI Swapchain>> section. * Update valid usage for flink:vkCmdSetViewport and flink:vkCmdSetScissor to account for the multiple viewport feature. If the feature is not enabled, the parameters for these functions have required values that are defined in the <<features-features-multiViewport,multiple viewports>> section of the spec but were not reflected in the valid usage text for these functions. * Add the +<<VK_EXT_swapchain_colorspace>>+ extension defining common color spaces.
2017-01-18 04:11:25 +00:00
=== latexmath block 15
[latexmath]
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Change log for February 10, 2017 Vulkan 1.0.40 spec update: * Bump API patch number and header version number to 40 for this update. * There is a major build change in this release. We are now using the Ruby-based ``asciidoctor'' implementation, rather than the Python-based ``asciidoc'' implementation, to process the specification. While the actual specification markup changes were minimal, this requires a new set of build tools and a very different installation process, especially because we now use an experimental direct-to-PDF backend for Asciidoctor instead of Docbook->dblatex->PDF. It is no longer possible to build the Specification using asciidoc. See doc/specs/vulkan/README.adoc for some guidance on installing the new toolchain components. * There are some minor rendering issues in the PDF output due to teething problems with the asciidoctor toolchain, especially with mathematical equations. We are aware of these and working on them. Github Issues: * Updated sample code for the <<sparsememory-examples-basic,sparse resource binding example>> (public issue 97). * Modify line and point clipping behavior in the <<vertexpostproc-clipping, Primitive Clipping>> section to allow for pop-free behavior. The ability to check for which behavior is implemented may be added a future feature or extension (public issue 113). * Unify the discussions of implicit ordering throughout the spec, in particular in the new sections <<drawing-primitive-order, Primitive Order>>, <<primrast-order, Rasterization Order>>, and <<synchronization-implicit, Implicit Synchronization Guarantees>>; the discussion of <<synchronization-submission-order, submission order>>; and references elsewhere to these sections (public issue 133). * Clarify \<\<descriptorsets-compatibility,Pipeline Layout Compatibility>> language and introduce the term ``identically defined'' (public issue 164). * Add a dependency to the +VK_EXT_debug_marker+ extension that's needed to reuse the object type enum from +VK_EXT_debug_report+, and moves the definition of that enum into +VK_EXT_debug_report+ where it should be (public issue 409). * Remove redundant valid usage statement from slink:VkImageBlit (public issue 421). * Update GL_KHR_vulkan_glsl to allow the ternary operator to result in a specialization constant (public issue 424). * Fix valid usage for flink:VkPipelineShaderStageCreateInfo (public issue 426). * Correct typo in New Objects list for <<VK_EXT_debug_report>> (public issue 447). Internal Issues: * Moved to asciidoctor for spec builds (internal issue 121). * Update style guide to describe where to put new extensions-specific asciidoc files, and what to name them (internal issue 626). * Add src/spec/indexExt.py to autogenerate registry index entries linking into the 1.0-extensions specification, instead of maintaining the index manually. (internal issue 642). * Autogenerate extension dependencies and lists of all extensions and all KHR extensions from the "supported" attributes in +vk.xml+. Execute +make config/extDependency.sh+ from +doc/specs/vulkan+ when a supported extension is added to vk.xml, to regenerate the dependency script. The consequence is that specifying a single extension to the +makeExt+ script will automatically enable all extensions it depends on as well, and that the +makeAllExts+ and +makeKHR+ scripts do not need to be updated when a new extension is supported (internal issue 648). * Put extension appendices all at the same asciidoc section level, so KHR WSI extensions show up in the HTML index (internal issue 648). Other Issues: * Imbed images in the generated HTML specs instead of loading them from the images/ directory. * Fix missing EXT in extension name (ename:VK_EXT_SWAPCHAIN_COLOR_SPACE_EXTENSION_NAME). * Add new +VK_EXT_SMPTE_2086_metadata+ extension. * In the <<platformCreateSurface_xlib,Xlib Surface>> section of the +VK_KHR_xlib_surface+ specification, add language warning users that they always need to call code:XinitThreads. * Use the term "presentable image" (rather than "swapchain image") consistently in +VK_KHR_swapchain+ and related extensions, and add a glossary term defining it. * Relocate the valid usage for samples of flink:vkGetPhysicalDeviceSparseImageFormatProperties2KHR::pname:pFormatInfo to be below the flink:VkPhysicalDeviceSparseImageFormatInfo2KHR structure.
2017-02-11 04:37:39 +00:00
a = {{\mathrm{A}(p p_b p_c)} \over {\mathrm{A}(p_a p_b p_c)}}, \quad
b = {{\mathrm{A}(p p_a p_c)} \over {\mathrm{A}(p_a p_b p_c)}}, \quad
c = {{\mathrm{A}(p p_a p_b)} \over {\mathrm{A}(p_a p_b p_c)}},
Change log for January 23, 2017 Vulkan 1.0.39 spec update: * Bump API patch number and header version number to 39 for this update. Github Issues: * Clarified that only accesses via the specified buffer/image subresource ranges are included in the access scopes (public issue 306). * Add missing valid usage statements for flink:vkCreateComputePipelines and flink:vkCreateGraphicsPipelines (public issue 427). Internal Issues: * Add a Note to the <<invariance,Invariance>> appendix about a difference between OpenGL and Vulkan with regards to how primitives derived from offsets are handled (internal issue 355). * Add the +<<VK_KHR_get_physical_device_properties2>>+, +<<VK_KHR_maintenance1>>+, and +<<VK_KHR_shader_draw_parameters>>+ extensions (internal issue 448). * Add the +<<VK_EXT_shader_subgroup_vote>>+ and +<<VK_EXT_shader_subgroup_ballot>>+ extensions (internal issue 449). * Update the texture level-of-detail equation in the <<textures-scale-factor,Scale Factor Operation>> section to better approximate the ellipse major and minor axes (internal issue 547). * Forbid non-explicitly allowed uses of interface decorations in the introduction to the <<interfaces,Shader Interfaces>> chapter (internal issue 607). * Replace use of MathJax with KaTeX, for improved load-time performance as well as avoiding the scrolling-and-scrolling behavior due to MathJax asynchronous rendering when loading at an anchor inside the spec. This change also requires moving to HTML5 output for the spec instead of XHTML, and there is a visible difference in that the chapter navigation index is now in a scrollable sidebar instead of at the top of the document. We may or may not retain the nav sidebar based on feedback (internal issue 613). * Improve consistency of markup and formatting in extension appendices (internal issue 631). Other Issues: * Add explicit valid usage statements to slink:VkImageCopy requiring that the source and destination layer ranges be contained in their respective source and destination images. * Add valid usage language for swapchain of flink:vkAcquireNextImage. If the swapchain has been replaced, then it should not be passed to flink:vkAcquireNextImage. * Add a valid usage statement to flink:vkCreateImageView, that the image must have been created with an appropriate usage bit set. * Noted that slink:VkDisplayPresentInfoKHR is a valid extension of slink:VkPresentInfoKHR in the <<wsi_swapchain,WSI Swapchain>> section. * Update valid usage for flink:vkCmdSetViewport and flink:vkCmdSetScissor to account for the multiple viewport feature. If the feature is not enabled, the parameters for these functions have required values that are defined in the <<features-features-multiViewport,multiple viewports>> section of the spec but were not reflected in the valid usage text for these functions. * Add the +<<VK_EXT_swapchain_colorspace>>+ extension defining common color spaces.
2017-01-18 04:11:25 +00:00
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
=== latexmath block 16
[latexmath]
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Change log for February 10, 2017 Vulkan 1.0.40 spec update: * Bump API patch number and header version number to 40 for this update. * There is a major build change in this release. We are now using the Ruby-based ``asciidoctor'' implementation, rather than the Python-based ``asciidoc'' implementation, to process the specification. While the actual specification markup changes were minimal, this requires a new set of build tools and a very different installation process, especially because we now use an experimental direct-to-PDF backend for Asciidoctor instead of Docbook->dblatex->PDF. It is no longer possible to build the Specification using asciidoc. See doc/specs/vulkan/README.adoc for some guidance on installing the new toolchain components. * There are some minor rendering issues in the PDF output due to teething problems with the asciidoctor toolchain, especially with mathematical equations. We are aware of these and working on them. Github Issues: * Updated sample code for the <<sparsememory-examples-basic,sparse resource binding example>> (public issue 97). * Modify line and point clipping behavior in the <<vertexpostproc-clipping, Primitive Clipping>> section to allow for pop-free behavior. The ability to check for which behavior is implemented may be added a future feature or extension (public issue 113). * Unify the discussions of implicit ordering throughout the spec, in particular in the new sections <<drawing-primitive-order, Primitive Order>>, <<primrast-order, Rasterization Order>>, and <<synchronization-implicit, Implicit Synchronization Guarantees>>; the discussion of <<synchronization-submission-order, submission order>>; and references elsewhere to these sections (public issue 133). * Clarify \<\<descriptorsets-compatibility,Pipeline Layout Compatibility>> language and introduce the term ``identically defined'' (public issue 164). * Add a dependency to the +VK_EXT_debug_marker+ extension that's needed to reuse the object type enum from +VK_EXT_debug_report+, and moves the definition of that enum into +VK_EXT_debug_report+ where it should be (public issue 409). * Remove redundant valid usage statement from slink:VkImageBlit (public issue 421). * Update GL_KHR_vulkan_glsl to allow the ternary operator to result in a specialization constant (public issue 424). * Fix valid usage for flink:VkPipelineShaderStageCreateInfo (public issue 426). * Correct typo in New Objects list for <<VK_EXT_debug_report>> (public issue 447). Internal Issues: * Moved to asciidoctor for spec builds (internal issue 121). * Update style guide to describe where to put new extensions-specific asciidoc files, and what to name them (internal issue 626). * Add src/spec/indexExt.py to autogenerate registry index entries linking into the 1.0-extensions specification, instead of maintaining the index manually. (internal issue 642). * Autogenerate extension dependencies and lists of all extensions and all KHR extensions from the "supported" attributes in +vk.xml+. Execute +make config/extDependency.sh+ from +doc/specs/vulkan+ when a supported extension is added to vk.xml, to regenerate the dependency script. The consequence is that specifying a single extension to the +makeExt+ script will automatically enable all extensions it depends on as well, and that the +makeAllExts+ and +makeKHR+ scripts do not need to be updated when a new extension is supported (internal issue 648). * Put extension appendices all at the same asciidoc section level, so KHR WSI extensions show up in the HTML index (internal issue 648). Other Issues: * Imbed images in the generated HTML specs instead of loading them from the images/ directory. * Fix missing EXT in extension name (ename:VK_EXT_SWAPCHAIN_COLOR_SPACE_EXTENSION_NAME). * Add new +VK_EXT_SMPTE_2086_metadata+ extension. * In the <<platformCreateSurface_xlib,Xlib Surface>> section of the +VK_KHR_xlib_surface+ specification, add language warning users that they always need to call code:XinitThreads. * Use the term "presentable image" (rather than "swapchain image") consistently in +VK_KHR_swapchain+ and related extensions, and add a glossary term defining it. * Relocate the valid usage for samples of flink:vkGetPhysicalDeviceSparseImageFormatProperties2KHR::pname:pFormatInfo to be below the flink:VkPhysicalDeviceSparseImageFormatInfo2KHR structure.
2017-02-11 04:37:39 +00:00
f = { a {f_a / w_a} + b {f_b / w_b} + c {f_c / w_c} } \over
{ {a / w_a} + {b / w_b} + {c / w_c} }
Change log for January 23, 2017 Vulkan 1.0.39 spec update: * Bump API patch number and header version number to 39 for this update. Github Issues: * Clarified that only accesses via the specified buffer/image subresource ranges are included in the access scopes (public issue 306). * Add missing valid usage statements for flink:vkCreateComputePipelines and flink:vkCreateGraphicsPipelines (public issue 427). Internal Issues: * Add a Note to the <<invariance,Invariance>> appendix about a difference between OpenGL and Vulkan with regards to how primitives derived from offsets are handled (internal issue 355). * Add the +<<VK_KHR_get_physical_device_properties2>>+, +<<VK_KHR_maintenance1>>+, and +<<VK_KHR_shader_draw_parameters>>+ extensions (internal issue 448). * Add the +<<VK_EXT_shader_subgroup_vote>>+ and +<<VK_EXT_shader_subgroup_ballot>>+ extensions (internal issue 449). * Update the texture level-of-detail equation in the <<textures-scale-factor,Scale Factor Operation>> section to better approximate the ellipse major and minor axes (internal issue 547). * Forbid non-explicitly allowed uses of interface decorations in the introduction to the <<interfaces,Shader Interfaces>> chapter (internal issue 607). * Replace use of MathJax with KaTeX, for improved load-time performance as well as avoiding the scrolling-and-scrolling behavior due to MathJax asynchronous rendering when loading at an anchor inside the spec. This change also requires moving to HTML5 output for the spec instead of XHTML, and there is a visible difference in that the chapter navigation index is now in a scrollable sidebar instead of at the top of the document. We may or may not retain the nav sidebar based on feedback (internal issue 613). * Improve consistency of markup and formatting in extension appendices (internal issue 631). Other Issues: * Add explicit valid usage statements to slink:VkImageCopy requiring that the source and destination layer ranges be contained in their respective source and destination images. * Add valid usage language for swapchain of flink:vkAcquireNextImage. If the swapchain has been replaced, then it should not be passed to flink:vkAcquireNextImage. * Add a valid usage statement to flink:vkCreateImageView, that the image must have been created with an appropriate usage bit set. * Noted that slink:VkDisplayPresentInfoKHR is a valid extension of slink:VkPresentInfoKHR in the <<wsi_swapchain,WSI Swapchain>> section. * Update valid usage for flink:vkCmdSetViewport and flink:vkCmdSetScissor to account for the multiple viewport feature. If the feature is not enabled, the parameters for these functions have required values that are defined in the <<features-features-multiViewport,multiple viewports>> section of the spec but were not reflected in the valid usage text for these functions. * Add the +<<VK_EXT_swapchain_colorspace>>+ extension defining common color spaces.
2017-01-18 04:11:25 +00:00
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
=== latexmath block 17
[latexmath]
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Change log for February 10, 2017 Vulkan 1.0.40 spec update: * Bump API patch number and header version number to 40 for this update. * There is a major build change in this release. We are now using the Ruby-based ``asciidoctor'' implementation, rather than the Python-based ``asciidoc'' implementation, to process the specification. While the actual specification markup changes were minimal, this requires a new set of build tools and a very different installation process, especially because we now use an experimental direct-to-PDF backend for Asciidoctor instead of Docbook->dblatex->PDF. It is no longer possible to build the Specification using asciidoc. See doc/specs/vulkan/README.adoc for some guidance on installing the new toolchain components. * There are some minor rendering issues in the PDF output due to teething problems with the asciidoctor toolchain, especially with mathematical equations. We are aware of these and working on them. Github Issues: * Updated sample code for the <<sparsememory-examples-basic,sparse resource binding example>> (public issue 97). * Modify line and point clipping behavior in the <<vertexpostproc-clipping, Primitive Clipping>> section to allow for pop-free behavior. The ability to check for which behavior is implemented may be added a future feature or extension (public issue 113). * Unify the discussions of implicit ordering throughout the spec, in particular in the new sections <<drawing-primitive-order, Primitive Order>>, <<primrast-order, Rasterization Order>>, and <<synchronization-implicit, Implicit Synchronization Guarantees>>; the discussion of <<synchronization-submission-order, submission order>>; and references elsewhere to these sections (public issue 133). * Clarify \<\<descriptorsets-compatibility,Pipeline Layout Compatibility>> language and introduce the term ``identically defined'' (public issue 164). * Add a dependency to the +VK_EXT_debug_marker+ extension that's needed to reuse the object type enum from +VK_EXT_debug_report+, and moves the definition of that enum into +VK_EXT_debug_report+ where it should be (public issue 409). * Remove redundant valid usage statement from slink:VkImageBlit (public issue 421). * Update GL_KHR_vulkan_glsl to allow the ternary operator to result in a specialization constant (public issue 424). * Fix valid usage for flink:VkPipelineShaderStageCreateInfo (public issue 426). * Correct typo in New Objects list for <<VK_EXT_debug_report>> (public issue 447). Internal Issues: * Moved to asciidoctor for spec builds (internal issue 121). * Update style guide to describe where to put new extensions-specific asciidoc files, and what to name them (internal issue 626). * Add src/spec/indexExt.py to autogenerate registry index entries linking into the 1.0-extensions specification, instead of maintaining the index manually. (internal issue 642). * Autogenerate extension dependencies and lists of all extensions and all KHR extensions from the "supported" attributes in +vk.xml+. Execute +make config/extDependency.sh+ from +doc/specs/vulkan+ when a supported extension is added to vk.xml, to regenerate the dependency script. The consequence is that specifying a single extension to the +makeExt+ script will automatically enable all extensions it depends on as well, and that the +makeAllExts+ and +makeKHR+ scripts do not need to be updated when a new extension is supported (internal issue 648). * Put extension appendices all at the same asciidoc section level, so KHR WSI extensions show up in the HTML index (internal issue 648). Other Issues: * Imbed images in the generated HTML specs instead of loading them from the images/ directory. * Fix missing EXT in extension name (ename:VK_EXT_SWAPCHAIN_COLOR_SPACE_EXTENSION_NAME). * Add new +VK_EXT_SMPTE_2086_metadata+ extension. * In the <<platformCreateSurface_xlib,Xlib Surface>> section of the +VK_KHR_xlib_surface+ specification, add language warning users that they always need to call code:XinitThreads. * Use the term "presentable image" (rather than "swapchain image") consistently in +VK_KHR_swapchain+ and related extensions, and add a glossary term defining it. * Relocate the valid usage for samples of flink:vkGetPhysicalDeviceSparseImageFormatProperties2KHR::pname:pFormatInfo to be below the flink:VkPhysicalDeviceSparseImageFormatInfo2KHR structure.
2017-02-11 04:37:39 +00:00
f = \sum_{i=1}^{n} a_i f_i
Change log for January 23, 2017 Vulkan 1.0.39 spec update: * Bump API patch number and header version number to 39 for this update. Github Issues: * Clarified that only accesses via the specified buffer/image subresource ranges are included in the access scopes (public issue 306). * Add missing valid usage statements for flink:vkCreateComputePipelines and flink:vkCreateGraphicsPipelines (public issue 427). Internal Issues: * Add a Note to the <<invariance,Invariance>> appendix about a difference between OpenGL and Vulkan with regards to how primitives derived from offsets are handled (internal issue 355). * Add the +<<VK_KHR_get_physical_device_properties2>>+, +<<VK_KHR_maintenance1>>+, and +<<VK_KHR_shader_draw_parameters>>+ extensions (internal issue 448). * Add the +<<VK_EXT_shader_subgroup_vote>>+ and +<<VK_EXT_shader_subgroup_ballot>>+ extensions (internal issue 449). * Update the texture level-of-detail equation in the <<textures-scale-factor,Scale Factor Operation>> section to better approximate the ellipse major and minor axes (internal issue 547). * Forbid non-explicitly allowed uses of interface decorations in the introduction to the <<interfaces,Shader Interfaces>> chapter (internal issue 607). * Replace use of MathJax with KaTeX, for improved load-time performance as well as avoiding the scrolling-and-scrolling behavior due to MathJax asynchronous rendering when loading at an anchor inside the spec. This change also requires moving to HTML5 output for the spec instead of XHTML, and there is a visible difference in that the chapter navigation index is now in a scrollable sidebar instead of at the top of the document. We may or may not retain the nav sidebar based on feedback (internal issue 613). * Improve consistency of markup and formatting in extension appendices (internal issue 631). Other Issues: * Add explicit valid usage statements to slink:VkImageCopy requiring that the source and destination layer ranges be contained in their respective source and destination images. * Add valid usage language for swapchain of flink:vkAcquireNextImage. If the swapchain has been replaced, then it should not be passed to flink:vkAcquireNextImage. * Add a valid usage statement to flink:vkCreateImageView, that the image must have been created with an appropriate usage bit set. * Noted that slink:VkDisplayPresentInfoKHR is a valid extension of slink:VkPresentInfoKHR in the <<wsi_swapchain,WSI Swapchain>> section. * Update valid usage for flink:vkCmdSetViewport and flink:vkCmdSetScissor to account for the multiple viewport feature. If the feature is not enabled, the parameters for these functions have required values that are defined in the <<features-features-multiViewport,multiple viewports>> section of the spec but were not reflected in the valid usage text for these functions. * Add the +<<VK_EXT_swapchain_colorspace>>+ extension defining common color spaces.
2017-01-18 04:11:25 +00:00
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
=== latexmath inline 7
Change log for February 10, 2017 Vulkan 1.0.40 spec update: * Bump API patch number and header version number to 40 for this update. * There is a major build change in this release. We are now using the Ruby-based ``asciidoctor'' implementation, rather than the Python-based ``asciidoc'' implementation, to process the specification. While the actual specification markup changes were minimal, this requires a new set of build tools and a very different installation process, especially because we now use an experimental direct-to-PDF backend for Asciidoctor instead of Docbook->dblatex->PDF. It is no longer possible to build the Specification using asciidoc. See doc/specs/vulkan/README.adoc for some guidance on installing the new toolchain components. * There are some minor rendering issues in the PDF output due to teething problems with the asciidoctor toolchain, especially with mathematical equations. We are aware of these and working on them. Github Issues: * Updated sample code for the <<sparsememory-examples-basic,sparse resource binding example>> (public issue 97). * Modify line and point clipping behavior in the <<vertexpostproc-clipping, Primitive Clipping>> section to allow for pop-free behavior. The ability to check for which behavior is implemented may be added a future feature or extension (public issue 113). * Unify the discussions of implicit ordering throughout the spec, in particular in the new sections <<drawing-primitive-order, Primitive Order>>, <<primrast-order, Rasterization Order>>, and <<synchronization-implicit, Implicit Synchronization Guarantees>>; the discussion of <<synchronization-submission-order, submission order>>; and references elsewhere to these sections (public issue 133). * Clarify \<\<descriptorsets-compatibility,Pipeline Layout Compatibility>> language and introduce the term ``identically defined'' (public issue 164). * Add a dependency to the +VK_EXT_debug_marker+ extension that's needed to reuse the object type enum from +VK_EXT_debug_report+, and moves the definition of that enum into +VK_EXT_debug_report+ where it should be (public issue 409). * Remove redundant valid usage statement from slink:VkImageBlit (public issue 421). * Update GL_KHR_vulkan_glsl to allow the ternary operator to result in a specialization constant (public issue 424). * Fix valid usage for flink:VkPipelineShaderStageCreateInfo (public issue 426). * Correct typo in New Objects list for <<VK_EXT_debug_report>> (public issue 447). Internal Issues: * Moved to asciidoctor for spec builds (internal issue 121). * Update style guide to describe where to put new extensions-specific asciidoc files, and what to name them (internal issue 626). * Add src/spec/indexExt.py to autogenerate registry index entries linking into the 1.0-extensions specification, instead of maintaining the index manually. (internal issue 642). * Autogenerate extension dependencies and lists of all extensions and all KHR extensions from the "supported" attributes in +vk.xml+. Execute +make config/extDependency.sh+ from +doc/specs/vulkan+ when a supported extension is added to vk.xml, to regenerate the dependency script. The consequence is that specifying a single extension to the +makeExt+ script will automatically enable all extensions it depends on as well, and that the +makeAllExts+ and +makeKHR+ scripts do not need to be updated when a new extension is supported (internal issue 648). * Put extension appendices all at the same asciidoc section level, so KHR WSI extensions show up in the HTML index (internal issue 648). Other Issues: * Imbed images in the generated HTML specs instead of loading them from the images/ directory. * Fix missing EXT in extension name (ename:VK_EXT_SWAPCHAIN_COLOR_SPACE_EXTENSION_NAME). * Add new +VK_EXT_SMPTE_2086_metadata+ extension. * In the <<platformCreateSurface_xlib,Xlib Surface>> section of the +VK_KHR_xlib_surface+ specification, add language warning users that they always need to call code:XinitThreads. * Use the term "presentable image" (rather than "swapchain image") consistently in +VK_KHR_swapchain+ and related extensions, and add a glossary term defining it. * Relocate the valid usage for samples of flink:vkGetPhysicalDeviceSparseImageFormatProperties2KHR::pname:pFormatInfo to be below the flink:VkPhysicalDeviceSparseImageFormatInfo2KHR structure.
2017-02-11 04:37:39 +00:00
latexmath:[\sum_{i=1}^{n}a_i = 1].
Change log for January 23, 2017 Vulkan 1.0.39 spec update: * Bump API patch number and header version number to 39 for this update. Github Issues: * Clarified that only accesses via the specified buffer/image subresource ranges are included in the access scopes (public issue 306). * Add missing valid usage statements for flink:vkCreateComputePipelines and flink:vkCreateGraphicsPipelines (public issue 427). Internal Issues: * Add a Note to the <<invariance,Invariance>> appendix about a difference between OpenGL and Vulkan with regards to how primitives derived from offsets are handled (internal issue 355). * Add the +<<VK_KHR_get_physical_device_properties2>>+, +<<VK_KHR_maintenance1>>+, and +<<VK_KHR_shader_draw_parameters>>+ extensions (internal issue 448). * Add the +<<VK_EXT_shader_subgroup_vote>>+ and +<<VK_EXT_shader_subgroup_ballot>>+ extensions (internal issue 449). * Update the texture level-of-detail equation in the <<textures-scale-factor,Scale Factor Operation>> section to better approximate the ellipse major and minor axes (internal issue 547). * Forbid non-explicitly allowed uses of interface decorations in the introduction to the <<interfaces,Shader Interfaces>> chapter (internal issue 607). * Replace use of MathJax with KaTeX, for improved load-time performance as well as avoiding the scrolling-and-scrolling behavior due to MathJax asynchronous rendering when loading at an anchor inside the spec. This change also requires moving to HTML5 output for the spec instead of XHTML, and there is a visible difference in that the chapter navigation index is now in a scrollable sidebar instead of at the top of the document. We may or may not retain the nav sidebar based on feedback (internal issue 613). * Improve consistency of markup and formatting in extension appendices (internal issue 631). Other Issues: * Add explicit valid usage statements to slink:VkImageCopy requiring that the source and destination layer ranges be contained in their respective source and destination images. * Add valid usage language for swapchain of flink:vkAcquireNextImage. If the swapchain has been replaced, then it should not be passed to flink:vkAcquireNextImage. * Add a valid usage statement to flink:vkCreateImageView, that the image must have been created with an appropriate usage bit set. * Noted that slink:VkDisplayPresentInfoKHR is a valid extension of slink:VkPresentInfoKHR in the <<wsi_swapchain,WSI Swapchain>> section. * Update valid usage for flink:vkCmdSetViewport and flink:vkCmdSetScissor to account for the multiple viewport feature. If the feature is not enabled, the parameters for these functions have required values that are defined in the <<features-features-multiViewport,multiple viewports>> section of the spec but were not reflected in the valid usage text for these functions. * Add the +<<VK_EXT_swapchain_colorspace>>+ extension defining common color spaces.
2017-01-18 04:11:25 +00:00
=== latexmath block 18
[latexmath]
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Change log for February 10, 2017 Vulkan 1.0.40 spec update: * Bump API patch number and header version number to 40 for this update. * There is a major build change in this release. We are now using the Ruby-based ``asciidoctor'' implementation, rather than the Python-based ``asciidoc'' implementation, to process the specification. While the actual specification markup changes were minimal, this requires a new set of build tools and a very different installation process, especially because we now use an experimental direct-to-PDF backend for Asciidoctor instead of Docbook->dblatex->PDF. It is no longer possible to build the Specification using asciidoc. See doc/specs/vulkan/README.adoc for some guidance on installing the new toolchain components. * There are some minor rendering issues in the PDF output due to teething problems with the asciidoctor toolchain, especially with mathematical equations. We are aware of these and working on them. Github Issues: * Updated sample code for the <<sparsememory-examples-basic,sparse resource binding example>> (public issue 97). * Modify line and point clipping behavior in the <<vertexpostproc-clipping, Primitive Clipping>> section to allow for pop-free behavior. The ability to check for which behavior is implemented may be added a future feature or extension (public issue 113). * Unify the discussions of implicit ordering throughout the spec, in particular in the new sections <<drawing-primitive-order, Primitive Order>>, <<primrast-order, Rasterization Order>>, and <<synchronization-implicit, Implicit Synchronization Guarantees>>; the discussion of <<synchronization-submission-order, submission order>>; and references elsewhere to these sections (public issue 133). * Clarify \<\<descriptorsets-compatibility,Pipeline Layout Compatibility>> language and introduce the term ``identically defined'' (public issue 164). * Add a dependency to the +VK_EXT_debug_marker+ extension that's needed to reuse the object type enum from +VK_EXT_debug_report+, and moves the definition of that enum into +VK_EXT_debug_report+ where it should be (public issue 409). * Remove redundant valid usage statement from slink:VkImageBlit (public issue 421). * Update GL_KHR_vulkan_glsl to allow the ternary operator to result in a specialization constant (public issue 424). * Fix valid usage for flink:VkPipelineShaderStageCreateInfo (public issue 426). * Correct typo in New Objects list for <<VK_EXT_debug_report>> (public issue 447). Internal Issues: * Moved to asciidoctor for spec builds (internal issue 121). * Update style guide to describe where to put new extensions-specific asciidoc files, and what to name them (internal issue 626). * Add src/spec/indexExt.py to autogenerate registry index entries linking into the 1.0-extensions specification, instead of maintaining the index manually. (internal issue 642). * Autogenerate extension dependencies and lists of all extensions and all KHR extensions from the "supported" attributes in +vk.xml+. Execute +make config/extDependency.sh+ from +doc/specs/vulkan+ when a supported extension is added to vk.xml, to regenerate the dependency script. The consequence is that specifying a single extension to the +makeExt+ script will automatically enable all extensions it depends on as well, and that the +makeAllExts+ and +makeKHR+ scripts do not need to be updated when a new extension is supported (internal issue 648). * Put extension appendices all at the same asciidoc section level, so KHR WSI extensions show up in the HTML index (internal issue 648). Other Issues: * Imbed images in the generated HTML specs instead of loading them from the images/ directory. * Fix missing EXT in extension name (ename:VK_EXT_SWAPCHAIN_COLOR_SPACE_EXTENSION_NAME). * Add new +VK_EXT_SMPTE_2086_metadata+ extension. * In the <<platformCreateSurface_xlib,Xlib Surface>> section of the +VK_KHR_xlib_surface+ specification, add language warning users that they always need to call code:XinitThreads. * Use the term "presentable image" (rather than "swapchain image") consistently in +VK_KHR_swapchain+ and related extensions, and add a glossary term defining it. * Relocate the valid usage for samples of flink:vkGetPhysicalDeviceSparseImageFormatProperties2KHR::pname:pFormatInfo to be below the flink:VkPhysicalDeviceSparseImageFormatInfo2KHR structure.
2017-02-11 04:37:39 +00:00
m = \sqrt{ \left({{\partial z_f} \over {\partial x_f}}\right)^2
+ \left({{\partial z_f} \over {\partial y_f}}\right)^2}
Change log for January 23, 2017 Vulkan 1.0.39 spec update: * Bump API patch number and header version number to 39 for this update. Github Issues: * Clarified that only accesses via the specified buffer/image subresource ranges are included in the access scopes (public issue 306). * Add missing valid usage statements for flink:vkCreateComputePipelines and flink:vkCreateGraphicsPipelines (public issue 427). Internal Issues: * Add a Note to the <<invariance,Invariance>> appendix about a difference between OpenGL and Vulkan with regards to how primitives derived from offsets are handled (internal issue 355). * Add the +<<VK_KHR_get_physical_device_properties2>>+, +<<VK_KHR_maintenance1>>+, and +<<VK_KHR_shader_draw_parameters>>+ extensions (internal issue 448). * Add the +<<VK_EXT_shader_subgroup_vote>>+ and +<<VK_EXT_shader_subgroup_ballot>>+ extensions (internal issue 449). * Update the texture level-of-detail equation in the <<textures-scale-factor,Scale Factor Operation>> section to better approximate the ellipse major and minor axes (internal issue 547). * Forbid non-explicitly allowed uses of interface decorations in the introduction to the <<interfaces,Shader Interfaces>> chapter (internal issue 607). * Replace use of MathJax with KaTeX, for improved load-time performance as well as avoiding the scrolling-and-scrolling behavior due to MathJax asynchronous rendering when loading at an anchor inside the spec. This change also requires moving to HTML5 output for the spec instead of XHTML, and there is a visible difference in that the chapter navigation index is now in a scrollable sidebar instead of at the top of the document. We may or may not retain the nav sidebar based on feedback (internal issue 613). * Improve consistency of markup and formatting in extension appendices (internal issue 631). Other Issues: * Add explicit valid usage statements to slink:VkImageCopy requiring that the source and destination layer ranges be contained in their respective source and destination images. * Add valid usage language for swapchain of flink:vkAcquireNextImage. If the swapchain has been replaced, then it should not be passed to flink:vkAcquireNextImage. * Add a valid usage statement to flink:vkCreateImageView, that the image must have been created with an appropriate usage bit set. * Noted that slink:VkDisplayPresentInfoKHR is a valid extension of slink:VkPresentInfoKHR in the <<wsi_swapchain,WSI Swapchain>> section. * Update valid usage for flink:vkCmdSetViewport and flink:vkCmdSetScissor to account for the multiple viewport feature. If the feature is not enabled, the parameters for these functions have required values that are defined in the <<features-features-multiViewport,multiple viewports>> section of the spec but were not reflected in the valid usage text for these functions. * Add the +<<VK_EXT_swapchain_colorspace>>+ extension defining common color spaces.
2017-01-18 04:11:25 +00:00
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
=== latexmath block 19
[latexmath]
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Change log for February 10, 2017 Vulkan 1.0.40 spec update: * Bump API patch number and header version number to 40 for this update. * There is a major build change in this release. We are now using the Ruby-based ``asciidoctor'' implementation, rather than the Python-based ``asciidoc'' implementation, to process the specification. While the actual specification markup changes were minimal, this requires a new set of build tools and a very different installation process, especially because we now use an experimental direct-to-PDF backend for Asciidoctor instead of Docbook->dblatex->PDF. It is no longer possible to build the Specification using asciidoc. See doc/specs/vulkan/README.adoc for some guidance on installing the new toolchain components. * There are some minor rendering issues in the PDF output due to teething problems with the asciidoctor toolchain, especially with mathematical equations. We are aware of these and working on them. Github Issues: * Updated sample code for the <<sparsememory-examples-basic,sparse resource binding example>> (public issue 97). * Modify line and point clipping behavior in the <<vertexpostproc-clipping, Primitive Clipping>> section to allow for pop-free behavior. The ability to check for which behavior is implemented may be added a future feature or extension (public issue 113). * Unify the discussions of implicit ordering throughout the spec, in particular in the new sections <<drawing-primitive-order, Primitive Order>>, <<primrast-order, Rasterization Order>>, and <<synchronization-implicit, Implicit Synchronization Guarantees>>; the discussion of <<synchronization-submission-order, submission order>>; and references elsewhere to these sections (public issue 133). * Clarify \<\<descriptorsets-compatibility,Pipeline Layout Compatibility>> language and introduce the term ``identically defined'' (public issue 164). * Add a dependency to the +VK_EXT_debug_marker+ extension that's needed to reuse the object type enum from +VK_EXT_debug_report+, and moves the definition of that enum into +VK_EXT_debug_report+ where it should be (public issue 409). * Remove redundant valid usage statement from slink:VkImageBlit (public issue 421). * Update GL_KHR_vulkan_glsl to allow the ternary operator to result in a specialization constant (public issue 424). * Fix valid usage for flink:VkPipelineShaderStageCreateInfo (public issue 426). * Correct typo in New Objects list for <<VK_EXT_debug_report>> (public issue 447). Internal Issues: * Moved to asciidoctor for spec builds (internal issue 121). * Update style guide to describe where to put new extensions-specific asciidoc files, and what to name them (internal issue 626). * Add src/spec/indexExt.py to autogenerate registry index entries linking into the 1.0-extensions specification, instead of maintaining the index manually. (internal issue 642). * Autogenerate extension dependencies and lists of all extensions and all KHR extensions from the "supported" attributes in +vk.xml+. Execute +make config/extDependency.sh+ from +doc/specs/vulkan+ when a supported extension is added to vk.xml, to regenerate the dependency script. The consequence is that specifying a single extension to the +makeExt+ script will automatically enable all extensions it depends on as well, and that the +makeAllExts+ and +makeKHR+ scripts do not need to be updated when a new extension is supported (internal issue 648). * Put extension appendices all at the same asciidoc section level, so KHR WSI extensions show up in the HTML index (internal issue 648). Other Issues: * Imbed images in the generated HTML specs instead of loading them from the images/ directory. * Fix missing EXT in extension name (ename:VK_EXT_SWAPCHAIN_COLOR_SPACE_EXTENSION_NAME). * Add new +VK_EXT_SMPTE_2086_metadata+ extension. * In the <<platformCreateSurface_xlib,Xlib Surface>> section of the +VK_KHR_xlib_surface+ specification, add language warning users that they always need to call code:XinitThreads. * Use the term "presentable image" (rather than "swapchain image") consistently in +VK_KHR_swapchain+ and related extensions, and add a glossary term defining it. * Relocate the valid usage for samples of flink:vkGetPhysicalDeviceSparseImageFormatProperties2KHR::pname:pFormatInfo to be below the flink:VkPhysicalDeviceSparseImageFormatInfo2KHR structure.
2017-02-11 04:37:39 +00:00
m = \max\left( \left| {{\partial z_f} \over {\partial x_f}} \right|,
\left| {{\partial z_f} \over {\partial y_f}} \right| \right)
Change log for January 23, 2017 Vulkan 1.0.39 spec update: * Bump API patch number and header version number to 39 for this update. Github Issues: * Clarified that only accesses via the specified buffer/image subresource ranges are included in the access scopes (public issue 306). * Add missing valid usage statements for flink:vkCreateComputePipelines and flink:vkCreateGraphicsPipelines (public issue 427). Internal Issues: * Add a Note to the <<invariance,Invariance>> appendix about a difference between OpenGL and Vulkan with regards to how primitives derived from offsets are handled (internal issue 355). * Add the +<<VK_KHR_get_physical_device_properties2>>+, +<<VK_KHR_maintenance1>>+, and +<<VK_KHR_shader_draw_parameters>>+ extensions (internal issue 448). * Add the +<<VK_EXT_shader_subgroup_vote>>+ and +<<VK_EXT_shader_subgroup_ballot>>+ extensions (internal issue 449). * Update the texture level-of-detail equation in the <<textures-scale-factor,Scale Factor Operation>> section to better approximate the ellipse major and minor axes (internal issue 547). * Forbid non-explicitly allowed uses of interface decorations in the introduction to the <<interfaces,Shader Interfaces>> chapter (internal issue 607). * Replace use of MathJax with KaTeX, for improved load-time performance as well as avoiding the scrolling-and-scrolling behavior due to MathJax asynchronous rendering when loading at an anchor inside the spec. This change also requires moving to HTML5 output for the spec instead of XHTML, and there is a visible difference in that the chapter navigation index is now in a scrollable sidebar instead of at the top of the document. We may or may not retain the nav sidebar based on feedback (internal issue 613). * Improve consistency of markup and formatting in extension appendices (internal issue 631). Other Issues: * Add explicit valid usage statements to slink:VkImageCopy requiring that the source and destination layer ranges be contained in their respective source and destination images. * Add valid usage language for swapchain of flink:vkAcquireNextImage. If the swapchain has been replaced, then it should not be passed to flink:vkAcquireNextImage. * Add a valid usage statement to flink:vkCreateImageView, that the image must have been created with an appropriate usage bit set. * Noted that slink:VkDisplayPresentInfoKHR is a valid extension of slink:VkPresentInfoKHR in the <<wsi_swapchain,WSI Swapchain>> section. * Update valid usage for flink:vkCmdSetViewport and flink:vkCmdSetScissor to account for the multiple viewport feature. If the feature is not enabled, the parameters for these functions have required values that are defined in the <<features-features-multiViewport,multiple viewports>> section of the spec but were not reflected in the valid usage text for these functions. * Add the +<<VK_EXT_swapchain_colorspace>>+ extension defining common color spaces.
2017-01-18 04:11:25 +00:00
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
=== latexmath block 20
[latexmath]
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
o =
\begin{cases}
m \times depthBiasSlopeFactor +
r \times depthBiasConstantFactor & depthBiasClamp = 0\ or\ NaN \\
\min(m \times depthBiasSlopeFactor +
r \times depthBiasConstantFactor,
depthBiasClamp) & depthBiasClamp > 0 \\
\max(m \times depthBiasSlopeFactor +
r \times depthBiasConstantFactor,
depthBiasClamp) & depthBiasClamp < 0 \\
\end{cases}
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
== File chapters/tessellation.txt
=== latexmath inline 8
Change log for February 10, 2017 Vulkan 1.0.40 spec update: * Bump API patch number and header version number to 40 for this update. * There is a major build change in this release. We are now using the Ruby-based ``asciidoctor'' implementation, rather than the Python-based ``asciidoc'' implementation, to process the specification. While the actual specification markup changes were minimal, this requires a new set of build tools and a very different installation process, especially because we now use an experimental direct-to-PDF backend for Asciidoctor instead of Docbook->dblatex->PDF. It is no longer possible to build the Specification using asciidoc. See doc/specs/vulkan/README.adoc for some guidance on installing the new toolchain components. * There are some minor rendering issues in the PDF output due to teething problems with the asciidoctor toolchain, especially with mathematical equations. We are aware of these and working on them. Github Issues: * Updated sample code for the <<sparsememory-examples-basic,sparse resource binding example>> (public issue 97). * Modify line and point clipping behavior in the <<vertexpostproc-clipping, Primitive Clipping>> section to allow for pop-free behavior. The ability to check for which behavior is implemented may be added a future feature or extension (public issue 113). * Unify the discussions of implicit ordering throughout the spec, in particular in the new sections <<drawing-primitive-order, Primitive Order>>, <<primrast-order, Rasterization Order>>, and <<synchronization-implicit, Implicit Synchronization Guarantees>>; the discussion of <<synchronization-submission-order, submission order>>; and references elsewhere to these sections (public issue 133). * Clarify \<\<descriptorsets-compatibility,Pipeline Layout Compatibility>> language and introduce the term ``identically defined'' (public issue 164). * Add a dependency to the +VK_EXT_debug_marker+ extension that's needed to reuse the object type enum from +VK_EXT_debug_report+, and moves the definition of that enum into +VK_EXT_debug_report+ where it should be (public issue 409). * Remove redundant valid usage statement from slink:VkImageBlit (public issue 421). * Update GL_KHR_vulkan_glsl to allow the ternary operator to result in a specialization constant (public issue 424). * Fix valid usage for flink:VkPipelineShaderStageCreateInfo (public issue 426). * Correct typo in New Objects list for <<VK_EXT_debug_report>> (public issue 447). Internal Issues: * Moved to asciidoctor for spec builds (internal issue 121). * Update style guide to describe where to put new extensions-specific asciidoc files, and what to name them (internal issue 626). * Add src/spec/indexExt.py to autogenerate registry index entries linking into the 1.0-extensions specification, instead of maintaining the index manually. (internal issue 642). * Autogenerate extension dependencies and lists of all extensions and all KHR extensions from the "supported" attributes in +vk.xml+. Execute +make config/extDependency.sh+ from +doc/specs/vulkan+ when a supported extension is added to vk.xml, to regenerate the dependency script. The consequence is that specifying a single extension to the +makeExt+ script will automatically enable all extensions it depends on as well, and that the +makeAllExts+ and +makeKHR+ scripts do not need to be updated when a new extension is supported (internal issue 648). * Put extension appendices all at the same asciidoc section level, so KHR WSI extensions show up in the HTML index (internal issue 648). Other Issues: * Imbed images in the generated HTML specs instead of loading them from the images/ directory. * Fix missing EXT in extension name (ename:VK_EXT_SWAPCHAIN_COLOR_SPACE_EXTENSION_NAME). * Add new +VK_EXT_SMPTE_2086_metadata+ extension. * In the <<platformCreateSurface_xlib,Xlib Surface>> section of the +VK_KHR_xlib_surface+ specification, add language warning users that they always need to call code:XinitThreads. * Use the term "presentable image" (rather than "swapchain image") consistently in +VK_KHR_swapchain+ and related extensions, and add a glossary term defining it. * Relocate the valid usage for samples of flink:vkGetPhysicalDeviceSparseImageFormatProperties2KHR::pname:pFormatInfo to be below the flink:VkPhysicalDeviceSparseImageFormatInfo2KHR structure.
2017-02-11 04:37:39 +00:00
latexmath:[\frac{1}{n}, \frac{2}{n}, \ldots, \frac{n-1}{n}]
Change log for January 23, 2017 Vulkan 1.0.39 spec update: * Bump API patch number and header version number to 39 for this update. Github Issues: * Clarified that only accesses via the specified buffer/image subresource ranges are included in the access scopes (public issue 306). * Add missing valid usage statements for flink:vkCreateComputePipelines and flink:vkCreateGraphicsPipelines (public issue 427). Internal Issues: * Add a Note to the <<invariance,Invariance>> appendix about a difference between OpenGL and Vulkan with regards to how primitives derived from offsets are handled (internal issue 355). * Add the +<<VK_KHR_get_physical_device_properties2>>+, +<<VK_KHR_maintenance1>>+, and +<<VK_KHR_shader_draw_parameters>>+ extensions (internal issue 448). * Add the +<<VK_EXT_shader_subgroup_vote>>+ and +<<VK_EXT_shader_subgroup_ballot>>+ extensions (internal issue 449). * Update the texture level-of-detail equation in the <<textures-scale-factor,Scale Factor Operation>> section to better approximate the ellipse major and minor axes (internal issue 547). * Forbid non-explicitly allowed uses of interface decorations in the introduction to the <<interfaces,Shader Interfaces>> chapter (internal issue 607). * Replace use of MathJax with KaTeX, for improved load-time performance as well as avoiding the scrolling-and-scrolling behavior due to MathJax asynchronous rendering when loading at an anchor inside the spec. This change also requires moving to HTML5 output for the spec instead of XHTML, and there is a visible difference in that the chapter navigation index is now in a scrollable sidebar instead of at the top of the document. We may or may not retain the nav sidebar based on feedback (internal issue 613). * Improve consistency of markup and formatting in extension appendices (internal issue 631). Other Issues: * Add explicit valid usage statements to slink:VkImageCopy requiring that the source and destination layer ranges be contained in their respective source and destination images. * Add valid usage language for swapchain of flink:vkAcquireNextImage. If the swapchain has been replaced, then it should not be passed to flink:vkAcquireNextImage. * Add a valid usage statement to flink:vkCreateImageView, that the image must have been created with an appropriate usage bit set. * Noted that slink:VkDisplayPresentInfoKHR is a valid extension of slink:VkPresentInfoKHR in the <<wsi_swapchain,WSI Swapchain>> section. * Update valid usage for flink:vkCmdSetViewport and flink:vkCmdSetScissor to account for the multiple viewport feature. If the feature is not enabled, the parameters for these functions have required values that are defined in the <<features-features-multiViewport,multiple viewports>> section of the spec but were not reflected in the valid usage text for these functions. * Add the +<<VK_EXT_swapchain_colorspace>>+ extension defining common color spaces.
2017-01-18 04:11:25 +00:00
== File chapters/textures.txt
=== latexmath block 21
[latexmath]
+++++++++++++++++++
Change log for February 10, 2017 Vulkan 1.0.40 spec update: * Bump API patch number and header version number to 40 for this update. * There is a major build change in this release. We are now using the Ruby-based ``asciidoctor'' implementation, rather than the Python-based ``asciidoc'' implementation, to process the specification. While the actual specification markup changes were minimal, this requires a new set of build tools and a very different installation process, especially because we now use an experimental direct-to-PDF backend for Asciidoctor instead of Docbook->dblatex->PDF. It is no longer possible to build the Specification using asciidoc. See doc/specs/vulkan/README.adoc for some guidance on installing the new toolchain components. * There are some minor rendering issues in the PDF output due to teething problems with the asciidoctor toolchain, especially with mathematical equations. We are aware of these and working on them. Github Issues: * Updated sample code for the <<sparsememory-examples-basic,sparse resource binding example>> (public issue 97). * Modify line and point clipping behavior in the <<vertexpostproc-clipping, Primitive Clipping>> section to allow for pop-free behavior. The ability to check for which behavior is implemented may be added a future feature or extension (public issue 113). * Unify the discussions of implicit ordering throughout the spec, in particular in the new sections <<drawing-primitive-order, Primitive Order>>, <<primrast-order, Rasterization Order>>, and <<synchronization-implicit, Implicit Synchronization Guarantees>>; the discussion of <<synchronization-submission-order, submission order>>; and references elsewhere to these sections (public issue 133). * Clarify \<\<descriptorsets-compatibility,Pipeline Layout Compatibility>> language and introduce the term ``identically defined'' (public issue 164). * Add a dependency to the +VK_EXT_debug_marker+ extension that's needed to reuse the object type enum from +VK_EXT_debug_report+, and moves the definition of that enum into +VK_EXT_debug_report+ where it should be (public issue 409). * Remove redundant valid usage statement from slink:VkImageBlit (public issue 421). * Update GL_KHR_vulkan_glsl to allow the ternary operator to result in a specialization constant (public issue 424). * Fix valid usage for flink:VkPipelineShaderStageCreateInfo (public issue 426). * Correct typo in New Objects list for <<VK_EXT_debug_report>> (public issue 447). Internal Issues: * Moved to asciidoctor for spec builds (internal issue 121). * Update style guide to describe where to put new extensions-specific asciidoc files, and what to name them (internal issue 626). * Add src/spec/indexExt.py to autogenerate registry index entries linking into the 1.0-extensions specification, instead of maintaining the index manually. (internal issue 642). * Autogenerate extension dependencies and lists of all extensions and all KHR extensions from the "supported" attributes in +vk.xml+. Execute +make config/extDependency.sh+ from +doc/specs/vulkan+ when a supported extension is added to vk.xml, to regenerate the dependency script. The consequence is that specifying a single extension to the +makeExt+ script will automatically enable all extensions it depends on as well, and that the +makeAllExts+ and +makeKHR+ scripts do not need to be updated when a new extension is supported (internal issue 648). * Put extension appendices all at the same asciidoc section level, so KHR WSI extensions show up in the HTML index (internal issue 648). Other Issues: * Imbed images in the generated HTML specs instead of loading them from the images/ directory. * Fix missing EXT in extension name (ename:VK_EXT_SWAPCHAIN_COLOR_SPACE_EXTENSION_NAME). * Add new +VK_EXT_SMPTE_2086_metadata+ extension. * In the <<platformCreateSurface_xlib,Xlib Surface>> section of the +VK_KHR_xlib_surface+ specification, add language warning users that they always need to call code:XinitThreads. * Use the term "presentable image" (rather than "swapchain image") consistently in +VK_KHR_swapchain+ and related extensions, and add a glossary term defining it. * Relocate the valid usage for samples of flink:vkGetPhysicalDeviceSparseImageFormatProperties2KHR::pname:pFormatInfo to be below the flink:VkPhysicalDeviceSparseImageFormatInfo2KHR structure.
2017-02-11 04:37:39 +00:00
\begin{aligned}
Change log for January 23, 2017 Vulkan 1.0.39 spec update: * Bump API patch number and header version number to 39 for this update. Github Issues: * Clarified that only accesses via the specified buffer/image subresource ranges are included in the access scopes (public issue 306). * Add missing valid usage statements for flink:vkCreateComputePipelines and flink:vkCreateGraphicsPipelines (public issue 427). Internal Issues: * Add a Note to the <<invariance,Invariance>> appendix about a difference between OpenGL and Vulkan with regards to how primitives derived from offsets are handled (internal issue 355). * Add the +<<VK_KHR_get_physical_device_properties2>>+, +<<VK_KHR_maintenance1>>+, and +<<VK_KHR_shader_draw_parameters>>+ extensions (internal issue 448). * Add the +<<VK_EXT_shader_subgroup_vote>>+ and +<<VK_EXT_shader_subgroup_ballot>>+ extensions (internal issue 449). * Update the texture level-of-detail equation in the <<textures-scale-factor,Scale Factor Operation>> section to better approximate the ellipse major and minor axes (internal issue 547). * Forbid non-explicitly allowed uses of interface decorations in the introduction to the <<interfaces,Shader Interfaces>> chapter (internal issue 607). * Replace use of MathJax with KaTeX, for improved load-time performance as well as avoiding the scrolling-and-scrolling behavior due to MathJax asynchronous rendering when loading at an anchor inside the spec. This change also requires moving to HTML5 output for the spec instead of XHTML, and there is a visible difference in that the chapter navigation index is now in a scrollable sidebar instead of at the top of the document. We may or may not retain the nav sidebar based on feedback (internal issue 613). * Improve consistency of markup and formatting in extension appendices (internal issue 631). Other Issues: * Add explicit valid usage statements to slink:VkImageCopy requiring that the source and destination layer ranges be contained in their respective source and destination images. * Add valid usage language for swapchain of flink:vkAcquireNextImage. If the swapchain has been replaced, then it should not be passed to flink:vkAcquireNextImage. * Add a valid usage statement to flink:vkCreateImageView, that the image must have been created with an appropriate usage bit set. * Noted that slink:VkDisplayPresentInfoKHR is a valid extension of slink:VkPresentInfoKHR in the <<wsi_swapchain,WSI Swapchain>> section. * Update valid usage for flink:vkCmdSetViewport and flink:vkCmdSetScissor to account for the multiple viewport feature. If the feature is not enabled, the parameters for these functions have required values that are defined in the <<features-features-multiViewport,multiple viewports>> section of the spec but were not reflected in the valid usage text for these functions. * Add the +<<VK_EXT_swapchain_colorspace>>+ extension defining common color spaces.
2017-01-18 04:11:25 +00:00
N & = 9 & \text{number of mantissa bits per component} \\
B & = 15 & \text{exponent bias} \\
E_{max} & = 31 & \text{maximum possible biased exponent value} \\
sharedexp_{max} & = \frac{(2^N-1)}{2^N} \times 2^{(E_{max}-B)}
Change log for February 10, 2017 Vulkan 1.0.40 spec update: * Bump API patch number and header version number to 40 for this update. * There is a major build change in this release. We are now using the Ruby-based ``asciidoctor'' implementation, rather than the Python-based ``asciidoc'' implementation, to process the specification. While the actual specification markup changes were minimal, this requires a new set of build tools and a very different installation process, especially because we now use an experimental direct-to-PDF backend for Asciidoctor instead of Docbook->dblatex->PDF. It is no longer possible to build the Specification using asciidoc. See doc/specs/vulkan/README.adoc for some guidance on installing the new toolchain components. * There are some minor rendering issues in the PDF output due to teething problems with the asciidoctor toolchain, especially with mathematical equations. We are aware of these and working on them. Github Issues: * Updated sample code for the <<sparsememory-examples-basic,sparse resource binding example>> (public issue 97). * Modify line and point clipping behavior in the <<vertexpostproc-clipping, Primitive Clipping>> section to allow for pop-free behavior. The ability to check for which behavior is implemented may be added a future feature or extension (public issue 113). * Unify the discussions of implicit ordering throughout the spec, in particular in the new sections <<drawing-primitive-order, Primitive Order>>, <<primrast-order, Rasterization Order>>, and <<synchronization-implicit, Implicit Synchronization Guarantees>>; the discussion of <<synchronization-submission-order, submission order>>; and references elsewhere to these sections (public issue 133). * Clarify \<\<descriptorsets-compatibility,Pipeline Layout Compatibility>> language and introduce the term ``identically defined'' (public issue 164). * Add a dependency to the +VK_EXT_debug_marker+ extension that's needed to reuse the object type enum from +VK_EXT_debug_report+, and moves the definition of that enum into +VK_EXT_debug_report+ where it should be (public issue 409). * Remove redundant valid usage statement from slink:VkImageBlit (public issue 421). * Update GL_KHR_vulkan_glsl to allow the ternary operator to result in a specialization constant (public issue 424). * Fix valid usage for flink:VkPipelineShaderStageCreateInfo (public issue 426). * Correct typo in New Objects list for <<VK_EXT_debug_report>> (public issue 447). Internal Issues: * Moved to asciidoctor for spec builds (internal issue 121). * Update style guide to describe where to put new extensions-specific asciidoc files, and what to name them (internal issue 626). * Add src/spec/indexExt.py to autogenerate registry index entries linking into the 1.0-extensions specification, instead of maintaining the index manually. (internal issue 642). * Autogenerate extension dependencies and lists of all extensions and all KHR extensions from the "supported" attributes in +vk.xml+. Execute +make config/extDependency.sh+ from +doc/specs/vulkan+ when a supported extension is added to vk.xml, to regenerate the dependency script. The consequence is that specifying a single extension to the +makeExt+ script will automatically enable all extensions it depends on as well, and that the +makeAllExts+ and +makeKHR+ scripts do not need to be updated when a new extension is supported (internal issue 648). * Put extension appendices all at the same asciidoc section level, so KHR WSI extensions show up in the HTML index (internal issue 648). Other Issues: * Imbed images in the generated HTML specs instead of loading them from the images/ directory. * Fix missing EXT in extension name (ename:VK_EXT_SWAPCHAIN_COLOR_SPACE_EXTENSION_NAME). * Add new +VK_EXT_SMPTE_2086_metadata+ extension. * In the <<platformCreateSurface_xlib,Xlib Surface>> section of the +VK_KHR_xlib_surface+ specification, add language warning users that they always need to call code:XinitThreads. * Use the term "presentable image" (rather than "swapchain image") consistently in +VK_KHR_swapchain+ and related extensions, and add a glossary term defining it. * Relocate the valid usage for samples of flink:vkGetPhysicalDeviceSparseImageFormatProperties2KHR::pname:pFormatInfo to be below the flink:VkPhysicalDeviceSparseImageFormatInfo2KHR structure.
2017-02-11 04:37:39 +00:00
\end{aligned}
Change log for January 23, 2017 Vulkan 1.0.39 spec update: * Bump API patch number and header version number to 39 for this update. Github Issues: * Clarified that only accesses via the specified buffer/image subresource ranges are included in the access scopes (public issue 306). * Add missing valid usage statements for flink:vkCreateComputePipelines and flink:vkCreateGraphicsPipelines (public issue 427). Internal Issues: * Add a Note to the <<invariance,Invariance>> appendix about a difference between OpenGL and Vulkan with regards to how primitives derived from offsets are handled (internal issue 355). * Add the +<<VK_KHR_get_physical_device_properties2>>+, +<<VK_KHR_maintenance1>>+, and +<<VK_KHR_shader_draw_parameters>>+ extensions (internal issue 448). * Add the +<<VK_EXT_shader_subgroup_vote>>+ and +<<VK_EXT_shader_subgroup_ballot>>+ extensions (internal issue 449). * Update the texture level-of-detail equation in the <<textures-scale-factor,Scale Factor Operation>> section to better approximate the ellipse major and minor axes (internal issue 547). * Forbid non-explicitly allowed uses of interface decorations in the introduction to the <<interfaces,Shader Interfaces>> chapter (internal issue 607). * Replace use of MathJax with KaTeX, for improved load-time performance as well as avoiding the scrolling-and-scrolling behavior due to MathJax asynchronous rendering when loading at an anchor inside the spec. This change also requires moving to HTML5 output for the spec instead of XHTML, and there is a visible difference in that the chapter navigation index is now in a scrollable sidebar instead of at the top of the document. We may or may not retain the nav sidebar based on feedback (internal issue 613). * Improve consistency of markup and formatting in extension appendices (internal issue 631). Other Issues: * Add explicit valid usage statements to slink:VkImageCopy requiring that the source and destination layer ranges be contained in their respective source and destination images. * Add valid usage language for swapchain of flink:vkAcquireNextImage. If the swapchain has been replaced, then it should not be passed to flink:vkAcquireNextImage. * Add a valid usage statement to flink:vkCreateImageView, that the image must have been created with an appropriate usage bit set. * Noted that slink:VkDisplayPresentInfoKHR is a valid extension of slink:VkPresentInfoKHR in the <<wsi_swapchain,WSI Swapchain>> section. * Update valid usage for flink:vkCmdSetViewport and flink:vkCmdSetScissor to account for the multiple viewport feature. If the feature is not enabled, the parameters for these functions have required values that are defined in the <<features-features-multiViewport,multiple viewports>> section of the spec but were not reflected in the valid usage text for these functions. * Add the +<<VK_EXT_swapchain_colorspace>>+ extension defining common color spaces.
2017-01-18 04:11:25 +00:00
+++++++++++++++++++
=== latexmath block 22
[latexmath]
+++++++++++++++++++
Change log for February 10, 2017 Vulkan 1.0.40 spec update: * Bump API patch number and header version number to 40 for this update. * There is a major build change in this release. We are now using the Ruby-based ``asciidoctor'' implementation, rather than the Python-based ``asciidoc'' implementation, to process the specification. While the actual specification markup changes were minimal, this requires a new set of build tools and a very different installation process, especially because we now use an experimental direct-to-PDF backend for Asciidoctor instead of Docbook->dblatex->PDF. It is no longer possible to build the Specification using asciidoc. See doc/specs/vulkan/README.adoc for some guidance on installing the new toolchain components. * There are some minor rendering issues in the PDF output due to teething problems with the asciidoctor toolchain, especially with mathematical equations. We are aware of these and working on them. Github Issues: * Updated sample code for the <<sparsememory-examples-basic,sparse resource binding example>> (public issue 97). * Modify line and point clipping behavior in the <<vertexpostproc-clipping, Primitive Clipping>> section to allow for pop-free behavior. The ability to check for which behavior is implemented may be added a future feature or extension (public issue 113). * Unify the discussions of implicit ordering throughout the spec, in particular in the new sections <<drawing-primitive-order, Primitive Order>>, <<primrast-order, Rasterization Order>>, and <<synchronization-implicit, Implicit Synchronization Guarantees>>; the discussion of <<synchronization-submission-order, submission order>>; and references elsewhere to these sections (public issue 133). * Clarify \<\<descriptorsets-compatibility,Pipeline Layout Compatibility>> language and introduce the term ``identically defined'' (public issue 164). * Add a dependency to the +VK_EXT_debug_marker+ extension that's needed to reuse the object type enum from +VK_EXT_debug_report+, and moves the definition of that enum into +VK_EXT_debug_report+ where it should be (public issue 409). * Remove redundant valid usage statement from slink:VkImageBlit (public issue 421). * Update GL_KHR_vulkan_glsl to allow the ternary operator to result in a specialization constant (public issue 424). * Fix valid usage for flink:VkPipelineShaderStageCreateInfo (public issue 426). * Correct typo in New Objects list for <<VK_EXT_debug_report>> (public issue 447). Internal Issues: * Moved to asciidoctor for spec builds (internal issue 121). * Update style guide to describe where to put new extensions-specific asciidoc files, and what to name them (internal issue 626). * Add src/spec/indexExt.py to autogenerate registry index entries linking into the 1.0-extensions specification, instead of maintaining the index manually. (internal issue 642). * Autogenerate extension dependencies and lists of all extensions and all KHR extensions from the "supported" attributes in +vk.xml+. Execute +make config/extDependency.sh+ from +doc/specs/vulkan+ when a supported extension is added to vk.xml, to regenerate the dependency script. The consequence is that specifying a single extension to the +makeExt+ script will automatically enable all extensions it depends on as well, and that the +makeAllExts+ and +makeKHR+ scripts do not need to be updated when a new extension is supported (internal issue 648). * Put extension appendices all at the same asciidoc section level, so KHR WSI extensions show up in the HTML index (internal issue 648). Other Issues: * Imbed images in the generated HTML specs instead of loading them from the images/ directory. * Fix missing EXT in extension name (ename:VK_EXT_SWAPCHAIN_COLOR_SPACE_EXTENSION_NAME). * Add new +VK_EXT_SMPTE_2086_metadata+ extension. * In the <<platformCreateSurface_xlib,Xlib Surface>> section of the +VK_KHR_xlib_surface+ specification, add language warning users that they always need to call code:XinitThreads. * Use the term "presentable image" (rather than "swapchain image") consistently in +VK_KHR_swapchain+ and related extensions, and add a glossary term defining it. * Relocate the valid usage for samples of flink:vkGetPhysicalDeviceSparseImageFormatProperties2KHR::pname:pFormatInfo to be below the flink:VkPhysicalDeviceSparseImageFormatInfo2KHR structure.
2017-02-11 04:37:39 +00:00
\begin{aligned}
Change log for January 23, 2017 Vulkan 1.0.39 spec update: * Bump API patch number and header version number to 39 for this update. Github Issues: * Clarified that only accesses via the specified buffer/image subresource ranges are included in the access scopes (public issue 306). * Add missing valid usage statements for flink:vkCreateComputePipelines and flink:vkCreateGraphicsPipelines (public issue 427). Internal Issues: * Add a Note to the <<invariance,Invariance>> appendix about a difference between OpenGL and Vulkan with regards to how primitives derived from offsets are handled (internal issue 355). * Add the +<<VK_KHR_get_physical_device_properties2>>+, +<<VK_KHR_maintenance1>>+, and +<<VK_KHR_shader_draw_parameters>>+ extensions (internal issue 448). * Add the +<<VK_EXT_shader_subgroup_vote>>+ and +<<VK_EXT_shader_subgroup_ballot>>+ extensions (internal issue 449). * Update the texture level-of-detail equation in the <<textures-scale-factor,Scale Factor Operation>> section to better approximate the ellipse major and minor axes (internal issue 547). * Forbid non-explicitly allowed uses of interface decorations in the introduction to the <<interfaces,Shader Interfaces>> chapter (internal issue 607). * Replace use of MathJax with KaTeX, for improved load-time performance as well as avoiding the scrolling-and-scrolling behavior due to MathJax asynchronous rendering when loading at an anchor inside the spec. This change also requires moving to HTML5 output for the spec instead of XHTML, and there is a visible difference in that the chapter navigation index is now in a scrollable sidebar instead of at the top of the document. We may or may not retain the nav sidebar based on feedback (internal issue 613). * Improve consistency of markup and formatting in extension appendices (internal issue 631). Other Issues: * Add explicit valid usage statements to slink:VkImageCopy requiring that the source and destination layer ranges be contained in their respective source and destination images. * Add valid usage language for swapchain of flink:vkAcquireNextImage. If the swapchain has been replaced, then it should not be passed to flink:vkAcquireNextImage. * Add a valid usage statement to flink:vkCreateImageView, that the image must have been created with an appropriate usage bit set. * Noted that slink:VkDisplayPresentInfoKHR is a valid extension of slink:VkPresentInfoKHR in the <<wsi_swapchain,WSI Swapchain>> section. * Update valid usage for flink:vkCmdSetViewport and flink:vkCmdSetScissor to account for the multiple viewport feature. If the feature is not enabled, the parameters for these functions have required values that are defined in the <<features-features-multiViewport,multiple viewports>> section of the spec but were not reflected in the valid usage text for these functions. * Add the +<<VK_EXT_swapchain_colorspace>>+ extension defining common color spaces.
2017-01-18 04:11:25 +00:00
exp' =
\begin{cases}
\left \lfloor \log_2(max_{clamped}) \right \rfloor + (B+1)
Change log for February 10, 2017 Vulkan 1.0.40 spec update: * Bump API patch number and header version number to 40 for this update. * There is a major build change in this release. We are now using the Ruby-based ``asciidoctor'' implementation, rather than the Python-based ``asciidoc'' implementation, to process the specification. While the actual specification markup changes were minimal, this requires a new set of build tools and a very different installation process, especially because we now use an experimental direct-to-PDF backend for Asciidoctor instead of Docbook->dblatex->PDF. It is no longer possible to build the Specification using asciidoc. See doc/specs/vulkan/README.adoc for some guidance on installing the new toolchain components. * There are some minor rendering issues in the PDF output due to teething problems with the asciidoctor toolchain, especially with mathematical equations. We are aware of these and working on them. Github Issues: * Updated sample code for the <<sparsememory-examples-basic,sparse resource binding example>> (public issue 97). * Modify line and point clipping behavior in the <<vertexpostproc-clipping, Primitive Clipping>> section to allow for pop-free behavior. The ability to check for which behavior is implemented may be added a future feature or extension (public issue 113). * Unify the discussions of implicit ordering throughout the spec, in particular in the new sections <<drawing-primitive-order, Primitive Order>>, <<primrast-order, Rasterization Order>>, and <<synchronization-implicit, Implicit Synchronization Guarantees>>; the discussion of <<synchronization-submission-order, submission order>>; and references elsewhere to these sections (public issue 133). * Clarify \<\<descriptorsets-compatibility,Pipeline Layout Compatibility>> language and introduce the term ``identically defined'' (public issue 164). * Add a dependency to the +VK_EXT_debug_marker+ extension that's needed to reuse the object type enum from +VK_EXT_debug_report+, and moves the definition of that enum into +VK_EXT_debug_report+ where it should be (public issue 409). * Remove redundant valid usage statement from slink:VkImageBlit (public issue 421). * Update GL_KHR_vulkan_glsl to allow the ternary operator to result in a specialization constant (public issue 424). * Fix valid usage for flink:VkPipelineShaderStageCreateInfo (public issue 426). * Correct typo in New Objects list for <<VK_EXT_debug_report>> (public issue 447). Internal Issues: * Moved to asciidoctor for spec builds (internal issue 121). * Update style guide to describe where to put new extensions-specific asciidoc files, and what to name them (internal issue 626). * Add src/spec/indexExt.py to autogenerate registry index entries linking into the 1.0-extensions specification, instead of maintaining the index manually. (internal issue 642). * Autogenerate extension dependencies and lists of all extensions and all KHR extensions from the "supported" attributes in +vk.xml+. Execute +make config/extDependency.sh+ from +doc/specs/vulkan+ when a supported extension is added to vk.xml, to regenerate the dependency script. The consequence is that specifying a single extension to the +makeExt+ script will automatically enable all extensions it depends on as well, and that the +makeAllExts+ and +makeKHR+ scripts do not need to be updated when a new extension is supported (internal issue 648). * Put extension appendices all at the same asciidoc section level, so KHR WSI extensions show up in the HTML index (internal issue 648). Other Issues: * Imbed images in the generated HTML specs instead of loading them from the images/ directory. * Fix missing EXT in extension name (ename:VK_EXT_SWAPCHAIN_COLOR_SPACE_EXTENSION_NAME). * Add new +VK_EXT_SMPTE_2086_metadata+ extension. * In the <<platformCreateSurface_xlib,Xlib Surface>> section of the +VK_KHR_xlib_surface+ specification, add language warning users that they always need to call code:XinitThreads. * Use the term "presentable image" (rather than "swapchain image") consistently in +VK_KHR_swapchain+ and related extensions, and add a glossary term defining it. * Relocate the valid usage for samples of flink:vkGetPhysicalDeviceSparseImageFormatProperties2KHR::pname:pFormatInfo to be below the flink:VkPhysicalDeviceSparseImageFormatInfo2KHR structure.
2017-02-11 04:37:39 +00:00
& \text{for}\ max_{clamped} > 2^{-(B+1)} \\
Change log for January 23, 2017 Vulkan 1.0.39 spec update: * Bump API patch number and header version number to 39 for this update. Github Issues: * Clarified that only accesses via the specified buffer/image subresource ranges are included in the access scopes (public issue 306). * Add missing valid usage statements for flink:vkCreateComputePipelines and flink:vkCreateGraphicsPipelines (public issue 427). Internal Issues: * Add a Note to the <<invariance,Invariance>> appendix about a difference between OpenGL and Vulkan with regards to how primitives derived from offsets are handled (internal issue 355). * Add the +<<VK_KHR_get_physical_device_properties2>>+, +<<VK_KHR_maintenance1>>+, and +<<VK_KHR_shader_draw_parameters>>+ extensions (internal issue 448). * Add the +<<VK_EXT_shader_subgroup_vote>>+ and +<<VK_EXT_shader_subgroup_ballot>>+ extensions (internal issue 449). * Update the texture level-of-detail equation in the <<textures-scale-factor,Scale Factor Operation>> section to better approximate the ellipse major and minor axes (internal issue 547). * Forbid non-explicitly allowed uses of interface decorations in the introduction to the <<interfaces,Shader Interfaces>> chapter (internal issue 607). * Replace use of MathJax with KaTeX, for improved load-time performance as well as avoiding the scrolling-and-scrolling behavior due to MathJax asynchronous rendering when loading at an anchor inside the spec. This change also requires moving to HTML5 output for the spec instead of XHTML, and there is a visible difference in that the chapter navigation index is now in a scrollable sidebar instead of at the top of the document. We may or may not retain the nav sidebar based on feedback (internal issue 613). * Improve consistency of markup and formatting in extension appendices (internal issue 631). Other Issues: * Add explicit valid usage statements to slink:VkImageCopy requiring that the source and destination layer ranges be contained in their respective source and destination images. * Add valid usage language for swapchain of flink:vkAcquireNextImage. If the swapchain has been replaced, then it should not be passed to flink:vkAcquireNextImage. * Add a valid usage statement to flink:vkCreateImageView, that the image must have been created with an appropriate usage bit set. * Noted that slink:VkDisplayPresentInfoKHR is a valid extension of slink:VkPresentInfoKHR in the <<wsi_swapchain,WSI Swapchain>> section. * Update valid usage for flink:vkCmdSetViewport and flink:vkCmdSetScissor to account for the multiple viewport feature. If the feature is not enabled, the parameters for these functions have required values that are defined in the <<features-features-multiViewport,multiple viewports>> section of the spec but were not reflected in the valid usage text for these functions. * Add the +<<VK_EXT_swapchain_colorspace>>+ extension defining common color spaces.
2017-01-18 04:11:25 +00:00
0
Change log for February 10, 2017 Vulkan 1.0.40 spec update: * Bump API patch number and header version number to 40 for this update. * There is a major build change in this release. We are now using the Ruby-based ``asciidoctor'' implementation, rather than the Python-based ``asciidoc'' implementation, to process the specification. While the actual specification markup changes were minimal, this requires a new set of build tools and a very different installation process, especially because we now use an experimental direct-to-PDF backend for Asciidoctor instead of Docbook->dblatex->PDF. It is no longer possible to build the Specification using asciidoc. See doc/specs/vulkan/README.adoc for some guidance on installing the new toolchain components. * There are some minor rendering issues in the PDF output due to teething problems with the asciidoctor toolchain, especially with mathematical equations. We are aware of these and working on them. Github Issues: * Updated sample code for the <<sparsememory-examples-basic,sparse resource binding example>> (public issue 97). * Modify line and point clipping behavior in the <<vertexpostproc-clipping, Primitive Clipping>> section to allow for pop-free behavior. The ability to check for which behavior is implemented may be added a future feature or extension (public issue 113). * Unify the discussions of implicit ordering throughout the spec, in particular in the new sections <<drawing-primitive-order, Primitive Order>>, <<primrast-order, Rasterization Order>>, and <<synchronization-implicit, Implicit Synchronization Guarantees>>; the discussion of <<synchronization-submission-order, submission order>>; and references elsewhere to these sections (public issue 133). * Clarify \<\<descriptorsets-compatibility,Pipeline Layout Compatibility>> language and introduce the term ``identically defined'' (public issue 164). * Add a dependency to the +VK_EXT_debug_marker+ extension that's needed to reuse the object type enum from +VK_EXT_debug_report+, and moves the definition of that enum into +VK_EXT_debug_report+ where it should be (public issue 409). * Remove redundant valid usage statement from slink:VkImageBlit (public issue 421). * Update GL_KHR_vulkan_glsl to allow the ternary operator to result in a specialization constant (public issue 424). * Fix valid usage for flink:VkPipelineShaderStageCreateInfo (public issue 426). * Correct typo in New Objects list for <<VK_EXT_debug_report>> (public issue 447). Internal Issues: * Moved to asciidoctor for spec builds (internal issue 121). * Update style guide to describe where to put new extensions-specific asciidoc files, and what to name them (internal issue 626). * Add src/spec/indexExt.py to autogenerate registry index entries linking into the 1.0-extensions specification, instead of maintaining the index manually. (internal issue 642). * Autogenerate extension dependencies and lists of all extensions and all KHR extensions from the "supported" attributes in +vk.xml+. Execute +make config/extDependency.sh+ from +doc/specs/vulkan+ when a supported extension is added to vk.xml, to regenerate the dependency script. The consequence is that specifying a single extension to the +makeExt+ script will automatically enable all extensions it depends on as well, and that the +makeAllExts+ and +makeKHR+ scripts do not need to be updated when a new extension is supported (internal issue 648). * Put extension appendices all at the same asciidoc section level, so KHR WSI extensions show up in the HTML index (internal issue 648). Other Issues: * Imbed images in the generated HTML specs instead of loading them from the images/ directory. * Fix missing EXT in extension name (ename:VK_EXT_SWAPCHAIN_COLOR_SPACE_EXTENSION_NAME). * Add new +VK_EXT_SMPTE_2086_metadata+ extension. * In the <<platformCreateSurface_xlib,Xlib Surface>> section of the +VK_KHR_xlib_surface+ specification, add language warning users that they always need to call code:XinitThreads. * Use the term "presentable image" (rather than "swapchain image") consistently in +VK_KHR_swapchain+ and related extensions, and add a glossary term defining it. * Relocate the valid usage for samples of flink:vkGetPhysicalDeviceSparseImageFormatProperties2KHR::pname:pFormatInfo to be below the flink:VkPhysicalDeviceSparseImageFormatInfo2KHR structure.
2017-02-11 04:37:39 +00:00
& \text{for}\ max_{clamped} \leq 2^{-(B+1)}
Change log for January 23, 2017 Vulkan 1.0.39 spec update: * Bump API patch number and header version number to 39 for this update. Github Issues: * Clarified that only accesses via the specified buffer/image subresource ranges are included in the access scopes (public issue 306). * Add missing valid usage statements for flink:vkCreateComputePipelines and flink:vkCreateGraphicsPipelines (public issue 427). Internal Issues: * Add a Note to the <<invariance,Invariance>> appendix about a difference between OpenGL and Vulkan with regards to how primitives derived from offsets are handled (internal issue 355). * Add the +<<VK_KHR_get_physical_device_properties2>>+, +<<VK_KHR_maintenance1>>+, and +<<VK_KHR_shader_draw_parameters>>+ extensions (internal issue 448). * Add the +<<VK_EXT_shader_subgroup_vote>>+ and +<<VK_EXT_shader_subgroup_ballot>>+ extensions (internal issue 449). * Update the texture level-of-detail equation in the <<textures-scale-factor,Scale Factor Operation>> section to better approximate the ellipse major and minor axes (internal issue 547). * Forbid non-explicitly allowed uses of interface decorations in the introduction to the <<interfaces,Shader Interfaces>> chapter (internal issue 607). * Replace use of MathJax with KaTeX, for improved load-time performance as well as avoiding the scrolling-and-scrolling behavior due to MathJax asynchronous rendering when loading at an anchor inside the spec. This change also requires moving to HTML5 output for the spec instead of XHTML, and there is a visible difference in that the chapter navigation index is now in a scrollable sidebar instead of at the top of the document. We may or may not retain the nav sidebar based on feedback (internal issue 613). * Improve consistency of markup and formatting in extension appendices (internal issue 631). Other Issues: * Add explicit valid usage statements to slink:VkImageCopy requiring that the source and destination layer ranges be contained in their respective source and destination images. * Add valid usage language for swapchain of flink:vkAcquireNextImage. If the swapchain has been replaced, then it should not be passed to flink:vkAcquireNextImage. * Add a valid usage statement to flink:vkCreateImageView, that the image must have been created with an appropriate usage bit set. * Noted that slink:VkDisplayPresentInfoKHR is a valid extension of slink:VkPresentInfoKHR in the <<wsi_swapchain,WSI Swapchain>> section. * Update valid usage for flink:vkCmdSetViewport and flink:vkCmdSetScissor to account for the multiple viewport feature. If the feature is not enabled, the parameters for these functions have required values that are defined in the <<features-features-multiViewport,multiple viewports>> section of the spec but were not reflected in the valid usage text for these functions. * Add the +<<VK_EXT_swapchain_colorspace>>+ extension defining common color spaces.
2017-01-18 04:11:25 +00:00
\end{cases}
Change log for February 10, 2017 Vulkan 1.0.40 spec update: * Bump API patch number and header version number to 40 for this update. * There is a major build change in this release. We are now using the Ruby-based ``asciidoctor'' implementation, rather than the Python-based ``asciidoc'' implementation, to process the specification. While the actual specification markup changes were minimal, this requires a new set of build tools and a very different installation process, especially because we now use an experimental direct-to-PDF backend for Asciidoctor instead of Docbook->dblatex->PDF. It is no longer possible to build the Specification using asciidoc. See doc/specs/vulkan/README.adoc for some guidance on installing the new toolchain components. * There are some minor rendering issues in the PDF output due to teething problems with the asciidoctor toolchain, especially with mathematical equations. We are aware of these and working on them. Github Issues: * Updated sample code for the <<sparsememory-examples-basic,sparse resource binding example>> (public issue 97). * Modify line and point clipping behavior in the <<vertexpostproc-clipping, Primitive Clipping>> section to allow for pop-free behavior. The ability to check for which behavior is implemented may be added a future feature or extension (public issue 113). * Unify the discussions of implicit ordering throughout the spec, in particular in the new sections <<drawing-primitive-order, Primitive Order>>, <<primrast-order, Rasterization Order>>, and <<synchronization-implicit, Implicit Synchronization Guarantees>>; the discussion of <<synchronization-submission-order, submission order>>; and references elsewhere to these sections (public issue 133). * Clarify \<\<descriptorsets-compatibility,Pipeline Layout Compatibility>> language and introduce the term ``identically defined'' (public issue 164). * Add a dependency to the +VK_EXT_debug_marker+ extension that's needed to reuse the object type enum from +VK_EXT_debug_report+, and moves the definition of that enum into +VK_EXT_debug_report+ where it should be (public issue 409). * Remove redundant valid usage statement from slink:VkImageBlit (public issue 421). * Update GL_KHR_vulkan_glsl to allow the ternary operator to result in a specialization constant (public issue 424). * Fix valid usage for flink:VkPipelineShaderStageCreateInfo (public issue 426). * Correct typo in New Objects list for <<VK_EXT_debug_report>> (public issue 447). Internal Issues: * Moved to asciidoctor for spec builds (internal issue 121). * Update style guide to describe where to put new extensions-specific asciidoc files, and what to name them (internal issue 626). * Add src/spec/indexExt.py to autogenerate registry index entries linking into the 1.0-extensions specification, instead of maintaining the index manually. (internal issue 642). * Autogenerate extension dependencies and lists of all extensions and all KHR extensions from the "supported" attributes in +vk.xml+. Execute +make config/extDependency.sh+ from +doc/specs/vulkan+ when a supported extension is added to vk.xml, to regenerate the dependency script. The consequence is that specifying a single extension to the +makeExt+ script will automatically enable all extensions it depends on as well, and that the +makeAllExts+ and +makeKHR+ scripts do not need to be updated when a new extension is supported (internal issue 648). * Put extension appendices all at the same asciidoc section level, so KHR WSI extensions show up in the HTML index (internal issue 648). Other Issues: * Imbed images in the generated HTML specs instead of loading them from the images/ directory. * Fix missing EXT in extension name (ename:VK_EXT_SWAPCHAIN_COLOR_SPACE_EXTENSION_NAME). * Add new +VK_EXT_SMPTE_2086_metadata+ extension. * In the <<platformCreateSurface_xlib,Xlib Surface>> section of the +VK_KHR_xlib_surface+ specification, add language warning users that they always need to call code:XinitThreads. * Use the term "presentable image" (rather than "swapchain image") consistently in +VK_KHR_swapchain+ and related extensions, and add a glossary term defining it. * Relocate the valid usage for samples of flink:vkGetPhysicalDeviceSparseImageFormatProperties2KHR::pname:pFormatInfo to be below the flink:VkPhysicalDeviceSparseImageFormatInfo2KHR structure.
2017-02-11 04:37:39 +00:00
\end{aligned}
Change log for January 23, 2017 Vulkan 1.0.39 spec update: * Bump API patch number and header version number to 39 for this update. Github Issues: * Clarified that only accesses via the specified buffer/image subresource ranges are included in the access scopes (public issue 306). * Add missing valid usage statements for flink:vkCreateComputePipelines and flink:vkCreateGraphicsPipelines (public issue 427). Internal Issues: * Add a Note to the <<invariance,Invariance>> appendix about a difference between OpenGL and Vulkan with regards to how primitives derived from offsets are handled (internal issue 355). * Add the +<<VK_KHR_get_physical_device_properties2>>+, +<<VK_KHR_maintenance1>>+, and +<<VK_KHR_shader_draw_parameters>>+ extensions (internal issue 448). * Add the +<<VK_EXT_shader_subgroup_vote>>+ and +<<VK_EXT_shader_subgroup_ballot>>+ extensions (internal issue 449). * Update the texture level-of-detail equation in the <<textures-scale-factor,Scale Factor Operation>> section to better approximate the ellipse major and minor axes (internal issue 547). * Forbid non-explicitly allowed uses of interface decorations in the introduction to the <<interfaces,Shader Interfaces>> chapter (internal issue 607). * Replace use of MathJax with KaTeX, for improved load-time performance as well as avoiding the scrolling-and-scrolling behavior due to MathJax asynchronous rendering when loading at an anchor inside the spec. This change also requires moving to HTML5 output for the spec instead of XHTML, and there is a visible difference in that the chapter navigation index is now in a scrollable sidebar instead of at the top of the document. We may or may not retain the nav sidebar based on feedback (internal issue 613). * Improve consistency of markup and formatting in extension appendices (internal issue 631). Other Issues: * Add explicit valid usage statements to slink:VkImageCopy requiring that the source and destination layer ranges be contained in their respective source and destination images. * Add valid usage language for swapchain of flink:vkAcquireNextImage. If the swapchain has been replaced, then it should not be passed to flink:vkAcquireNextImage. * Add a valid usage statement to flink:vkCreateImageView, that the image must have been created with an appropriate usage bit set. * Noted that slink:VkDisplayPresentInfoKHR is a valid extension of slink:VkPresentInfoKHR in the <<wsi_swapchain,WSI Swapchain>> section. * Update valid usage for flink:vkCmdSetViewport and flink:vkCmdSetScissor to account for the multiple viewport feature. If the feature is not enabled, the parameters for these functions have required values that are defined in the <<features-features-multiViewport,multiple viewports>> section of the spec but were not reflected in the valid usage text for these functions. * Add the +<<VK_EXT_swapchain_colorspace>>+ extension defining common color spaces.
2017-01-18 04:11:25 +00:00
+++++++++++++++++++
=== latexmath block 23
[latexmath]
+++++++++++++++++++
Change log for February 10, 2017 Vulkan 1.0.40 spec update: * Bump API patch number and header version number to 40 for this update. * There is a major build change in this release. We are now using the Ruby-based ``asciidoctor'' implementation, rather than the Python-based ``asciidoc'' implementation, to process the specification. While the actual specification markup changes were minimal, this requires a new set of build tools and a very different installation process, especially because we now use an experimental direct-to-PDF backend for Asciidoctor instead of Docbook->dblatex->PDF. It is no longer possible to build the Specification using asciidoc. See doc/specs/vulkan/README.adoc for some guidance on installing the new toolchain components. * There are some minor rendering issues in the PDF output due to teething problems with the asciidoctor toolchain, especially with mathematical equations. We are aware of these and working on them. Github Issues: * Updated sample code for the <<sparsememory-examples-basic,sparse resource binding example>> (public issue 97). * Modify line and point clipping behavior in the <<vertexpostproc-clipping, Primitive Clipping>> section to allow for pop-free behavior. The ability to check for which behavior is implemented may be added a future feature or extension (public issue 113). * Unify the discussions of implicit ordering throughout the spec, in particular in the new sections <<drawing-primitive-order, Primitive Order>>, <<primrast-order, Rasterization Order>>, and <<synchronization-implicit, Implicit Synchronization Guarantees>>; the discussion of <<synchronization-submission-order, submission order>>; and references elsewhere to these sections (public issue 133). * Clarify \<\<descriptorsets-compatibility,Pipeline Layout Compatibility>> language and introduce the term ``identically defined'' (public issue 164). * Add a dependency to the +VK_EXT_debug_marker+ extension that's needed to reuse the object type enum from +VK_EXT_debug_report+, and moves the definition of that enum into +VK_EXT_debug_report+ where it should be (public issue 409). * Remove redundant valid usage statement from slink:VkImageBlit (public issue 421). * Update GL_KHR_vulkan_glsl to allow the ternary operator to result in a specialization constant (public issue 424). * Fix valid usage for flink:VkPipelineShaderStageCreateInfo (public issue 426). * Correct typo in New Objects list for <<VK_EXT_debug_report>> (public issue 447). Internal Issues: * Moved to asciidoctor for spec builds (internal issue 121). * Update style guide to describe where to put new extensions-specific asciidoc files, and what to name them (internal issue 626). * Add src/spec/indexExt.py to autogenerate registry index entries linking into the 1.0-extensions specification, instead of maintaining the index manually. (internal issue 642). * Autogenerate extension dependencies and lists of all extensions and all KHR extensions from the "supported" attributes in +vk.xml+. Execute +make config/extDependency.sh+ from +doc/specs/vulkan+ when a supported extension is added to vk.xml, to regenerate the dependency script. The consequence is that specifying a single extension to the +makeExt+ script will automatically enable all extensions it depends on as well, and that the +makeAllExts+ and +makeKHR+ scripts do not need to be updated when a new extension is supported (internal issue 648). * Put extension appendices all at the same asciidoc section level, so KHR WSI extensions show up in the HTML index (internal issue 648). Other Issues: * Imbed images in the generated HTML specs instead of loading them from the images/ directory. * Fix missing EXT in extension name (ename:VK_EXT_SWAPCHAIN_COLOR_SPACE_EXTENSION_NAME). * Add new +VK_EXT_SMPTE_2086_metadata+ extension. * In the <<platformCreateSurface_xlib,Xlib Surface>> section of the +VK_KHR_xlib_surface+ specification, add language warning users that they always need to call code:XinitThreads. * Use the term "presentable image" (rather than "swapchain image") consistently in +VK_KHR_swapchain+ and related extensions, and add a glossary term defining it. * Relocate the valid usage for samples of flink:vkGetPhysicalDeviceSparseImageFormatProperties2KHR::pname:pFormatInfo to be below the flink:VkPhysicalDeviceSparseImageFormatInfo2KHR structure.
2017-02-11 04:37:39 +00:00
\begin{aligned}
Change log for January 23, 2017 Vulkan 1.0.39 spec update: * Bump API patch number and header version number to 39 for this update. Github Issues: * Clarified that only accesses via the specified buffer/image subresource ranges are included in the access scopes (public issue 306). * Add missing valid usage statements for flink:vkCreateComputePipelines and flink:vkCreateGraphicsPipelines (public issue 427). Internal Issues: * Add a Note to the <<invariance,Invariance>> appendix about a difference between OpenGL and Vulkan with regards to how primitives derived from offsets are handled (internal issue 355). * Add the +<<VK_KHR_get_physical_device_properties2>>+, +<<VK_KHR_maintenance1>>+, and +<<VK_KHR_shader_draw_parameters>>+ extensions (internal issue 448). * Add the +<<VK_EXT_shader_subgroup_vote>>+ and +<<VK_EXT_shader_subgroup_ballot>>+ extensions (internal issue 449). * Update the texture level-of-detail equation in the <<textures-scale-factor,Scale Factor Operation>> section to better approximate the ellipse major and minor axes (internal issue 547). * Forbid non-explicitly allowed uses of interface decorations in the introduction to the <<interfaces,Shader Interfaces>> chapter (internal issue 607). * Replace use of MathJax with KaTeX, for improved load-time performance as well as avoiding the scrolling-and-scrolling behavior due to MathJax asynchronous rendering when loading at an anchor inside the spec. This change also requires moving to HTML5 output for the spec instead of XHTML, and there is a visible difference in that the chapter navigation index is now in a scrollable sidebar instead of at the top of the document. We may or may not retain the nav sidebar based on feedback (internal issue 613). * Improve consistency of markup and formatting in extension appendices (internal issue 631). Other Issues: * Add explicit valid usage statements to slink:VkImageCopy requiring that the source and destination layer ranges be contained in their respective source and destination images. * Add valid usage language for swapchain of flink:vkAcquireNextImage. If the swapchain has been replaced, then it should not be passed to flink:vkAcquireNextImage. * Add a valid usage statement to flink:vkCreateImageView, that the image must have been created with an appropriate usage bit set. * Noted that slink:VkDisplayPresentInfoKHR is a valid extension of slink:VkPresentInfoKHR in the <<wsi_swapchain,WSI Swapchain>> section. * Update valid usage for flink:vkCmdSetViewport and flink:vkCmdSetScissor to account for the multiple viewport feature. If the feature is not enabled, the parameters for these functions have required values that are defined in the <<features-features-multiViewport,multiple viewports>> section of the spec but were not reflected in the valid usage text for these functions. * Add the +<<VK_EXT_swapchain_colorspace>>+ extension defining common color spaces.
2017-01-18 04:11:25 +00:00
max_{shared} =
\left \lfloor
\frac{max_{clamped}}{2^{(exp'-B-N)}}+\frac{1}{2}
\right \rfloor
Change log for February 10, 2017 Vulkan 1.0.40 spec update: * Bump API patch number and header version number to 40 for this update. * There is a major build change in this release. We are now using the Ruby-based ``asciidoctor'' implementation, rather than the Python-based ``asciidoc'' implementation, to process the specification. While the actual specification markup changes were minimal, this requires a new set of build tools and a very different installation process, especially because we now use an experimental direct-to-PDF backend for Asciidoctor instead of Docbook->dblatex->PDF. It is no longer possible to build the Specification using asciidoc. See doc/specs/vulkan/README.adoc for some guidance on installing the new toolchain components. * There are some minor rendering issues in the PDF output due to teething problems with the asciidoctor toolchain, especially with mathematical equations. We are aware of these and working on them. Github Issues: * Updated sample code for the <<sparsememory-examples-basic,sparse resource binding example>> (public issue 97). * Modify line and point clipping behavior in the <<vertexpostproc-clipping, Primitive Clipping>> section to allow for pop-free behavior. The ability to check for which behavior is implemented may be added a future feature or extension (public issue 113). * Unify the discussions of implicit ordering throughout the spec, in particular in the new sections <<drawing-primitive-order, Primitive Order>>, <<primrast-order, Rasterization Order>>, and <<synchronization-implicit, Implicit Synchronization Guarantees>>; the discussion of <<synchronization-submission-order, submission order>>; and references elsewhere to these sections (public issue 133). * Clarify \<\<descriptorsets-compatibility,Pipeline Layout Compatibility>> language and introduce the term ``identically defined'' (public issue 164). * Add a dependency to the +VK_EXT_debug_marker+ extension that's needed to reuse the object type enum from +VK_EXT_debug_report+, and moves the definition of that enum into +VK_EXT_debug_report+ where it should be (public issue 409). * Remove redundant valid usage statement from slink:VkImageBlit (public issue 421). * Update GL_KHR_vulkan_glsl to allow the ternary operator to result in a specialization constant (public issue 424). * Fix valid usage for flink:VkPipelineShaderStageCreateInfo (public issue 426). * Correct typo in New Objects list for <<VK_EXT_debug_report>> (public issue 447). Internal Issues: * Moved to asciidoctor for spec builds (internal issue 121). * Update style guide to describe where to put new extensions-specific asciidoc files, and what to name them (internal issue 626). * Add src/spec/indexExt.py to autogenerate registry index entries linking into the 1.0-extensions specification, instead of maintaining the index manually. (internal issue 642). * Autogenerate extension dependencies and lists of all extensions and all KHR extensions from the "supported" attributes in +vk.xml+. Execute +make config/extDependency.sh+ from +doc/specs/vulkan+ when a supported extension is added to vk.xml, to regenerate the dependency script. The consequence is that specifying a single extension to the +makeExt+ script will automatically enable all extensions it depends on as well, and that the +makeAllExts+ and +makeKHR+ scripts do not need to be updated when a new extension is supported (internal issue 648). * Put extension appendices all at the same asciidoc section level, so KHR WSI extensions show up in the HTML index (internal issue 648). Other Issues: * Imbed images in the generated HTML specs instead of loading them from the images/ directory. * Fix missing EXT in extension name (ename:VK_EXT_SWAPCHAIN_COLOR_SPACE_EXTENSION_NAME). * Add new +VK_EXT_SMPTE_2086_metadata+ extension. * In the <<platformCreateSurface_xlib,Xlib Surface>> section of the +VK_KHR_xlib_surface+ specification, add language warning users that they always need to call code:XinitThreads. * Use the term "presentable image" (rather than "swapchain image") consistently in +VK_KHR_swapchain+ and related extensions, and add a glossary term defining it. * Relocate the valid usage for samples of flink:vkGetPhysicalDeviceSparseImageFormatProperties2KHR::pname:pFormatInfo to be below the flink:VkPhysicalDeviceSparseImageFormatInfo2KHR structure.
2017-02-11 04:37:39 +00:00
\end{aligned}
Change log for January 23, 2017 Vulkan 1.0.39 spec update: * Bump API patch number and header version number to 39 for this update. Github Issues: * Clarified that only accesses via the specified buffer/image subresource ranges are included in the access scopes (public issue 306). * Add missing valid usage statements for flink:vkCreateComputePipelines and flink:vkCreateGraphicsPipelines (public issue 427). Internal Issues: * Add a Note to the <<invariance,Invariance>> appendix about a difference between OpenGL and Vulkan with regards to how primitives derived from offsets are handled (internal issue 355). * Add the +<<VK_KHR_get_physical_device_properties2>>+, +<<VK_KHR_maintenance1>>+, and +<<VK_KHR_shader_draw_parameters>>+ extensions (internal issue 448). * Add the +<<VK_EXT_shader_subgroup_vote>>+ and +<<VK_EXT_shader_subgroup_ballot>>+ extensions (internal issue 449). * Update the texture level-of-detail equation in the <<textures-scale-factor,Scale Factor Operation>> section to better approximate the ellipse major and minor axes (internal issue 547). * Forbid non-explicitly allowed uses of interface decorations in the introduction to the <<interfaces,Shader Interfaces>> chapter (internal issue 607). * Replace use of MathJax with KaTeX, for improved load-time performance as well as avoiding the scrolling-and-scrolling behavior due to MathJax asynchronous rendering when loading at an anchor inside the spec. This change also requires moving to HTML5 output for the spec instead of XHTML, and there is a visible difference in that the chapter navigation index is now in a scrollable sidebar instead of at the top of the document. We may or may not retain the nav sidebar based on feedback (internal issue 613). * Improve consistency of markup and formatting in extension appendices (internal issue 631). Other Issues: * Add explicit valid usage statements to slink:VkImageCopy requiring that the source and destination layer ranges be contained in their respective source and destination images. * Add valid usage language for swapchain of flink:vkAcquireNextImage. If the swapchain has been replaced, then it should not be passed to flink:vkAcquireNextImage. * Add a valid usage statement to flink:vkCreateImageView, that the image must have been created with an appropriate usage bit set. * Noted that slink:VkDisplayPresentInfoKHR is a valid extension of slink:VkPresentInfoKHR in the <<wsi_swapchain,WSI Swapchain>> section. * Update valid usage for flink:vkCmdSetViewport and flink:vkCmdSetScissor to account for the multiple viewport feature. If the feature is not enabled, the parameters for these functions have required values that are defined in the <<features-features-multiViewport,multiple viewports>> section of the spec but were not reflected in the valid usage text for these functions. * Add the +<<VK_EXT_swapchain_colorspace>>+ extension defining common color spaces.
2017-01-18 04:11:25 +00:00
+++++++++++++++++++
=== latexmath block 24
[latexmath]
+++++++++++++++++++
Change log for February 10, 2017 Vulkan 1.0.40 spec update: * Bump API patch number and header version number to 40 for this update. * There is a major build change in this release. We are now using the Ruby-based ``asciidoctor'' implementation, rather than the Python-based ``asciidoc'' implementation, to process the specification. While the actual specification markup changes were minimal, this requires a new set of build tools and a very different installation process, especially because we now use an experimental direct-to-PDF backend for Asciidoctor instead of Docbook->dblatex->PDF. It is no longer possible to build the Specification using asciidoc. See doc/specs/vulkan/README.adoc for some guidance on installing the new toolchain components. * There are some minor rendering issues in the PDF output due to teething problems with the asciidoctor toolchain, especially with mathematical equations. We are aware of these and working on them. Github Issues: * Updated sample code for the <<sparsememory-examples-basic,sparse resource binding example>> (public issue 97). * Modify line and point clipping behavior in the <<vertexpostproc-clipping, Primitive Clipping>> section to allow for pop-free behavior. The ability to check for which behavior is implemented may be added a future feature or extension (public issue 113). * Unify the discussions of implicit ordering throughout the spec, in particular in the new sections <<drawing-primitive-order, Primitive Order>>, <<primrast-order, Rasterization Order>>, and <<synchronization-implicit, Implicit Synchronization Guarantees>>; the discussion of <<synchronization-submission-order, submission order>>; and references elsewhere to these sections (public issue 133). * Clarify \<\<descriptorsets-compatibility,Pipeline Layout Compatibility>> language and introduce the term ``identically defined'' (public issue 164). * Add a dependency to the +VK_EXT_debug_marker+ extension that's needed to reuse the object type enum from +VK_EXT_debug_report+, and moves the definition of that enum into +VK_EXT_debug_report+ where it should be (public issue 409). * Remove redundant valid usage statement from slink:VkImageBlit (public issue 421). * Update GL_KHR_vulkan_glsl to allow the ternary operator to result in a specialization constant (public issue 424). * Fix valid usage for flink:VkPipelineShaderStageCreateInfo (public issue 426). * Correct typo in New Objects list for <<VK_EXT_debug_report>> (public issue 447). Internal Issues: * Moved to asciidoctor for spec builds (internal issue 121). * Update style guide to describe where to put new extensions-specific asciidoc files, and what to name them (internal issue 626). * Add src/spec/indexExt.py to autogenerate registry index entries linking into the 1.0-extensions specification, instead of maintaining the index manually. (internal issue 642). * Autogenerate extension dependencies and lists of all extensions and all KHR extensions from the "supported" attributes in +vk.xml+. Execute +make config/extDependency.sh+ from +doc/specs/vulkan+ when a supported extension is added to vk.xml, to regenerate the dependency script. The consequence is that specifying a single extension to the +makeExt+ script will automatically enable all extensions it depends on as well, and that the +makeAllExts+ and +makeKHR+ scripts do not need to be updated when a new extension is supported (internal issue 648). * Put extension appendices all at the same asciidoc section level, so KHR WSI extensions show up in the HTML index (internal issue 648). Other Issues: * Imbed images in the generated HTML specs instead of loading them from the images/ directory. * Fix missing EXT in extension name (ename:VK_EXT_SWAPCHAIN_COLOR_SPACE_EXTENSION_NAME). * Add new +VK_EXT_SMPTE_2086_metadata+ extension. * In the <<platformCreateSurface_xlib,Xlib Surface>> section of the +VK_KHR_xlib_surface+ specification, add language warning users that they always need to call code:XinitThreads. * Use the term "presentable image" (rather than "swapchain image") consistently in +VK_KHR_swapchain+ and related extensions, and add a glossary term defining it. * Relocate the valid usage for samples of flink:vkGetPhysicalDeviceSparseImageFormatProperties2KHR::pname:pFormatInfo to be below the flink:VkPhysicalDeviceSparseImageFormatInfo2KHR structure.
2017-02-11 04:37:39 +00:00
\begin{aligned}
Change log for January 23, 2017 Vulkan 1.0.39 spec update: * Bump API patch number and header version number to 39 for this update. Github Issues: * Clarified that only accesses via the specified buffer/image subresource ranges are included in the access scopes (public issue 306). * Add missing valid usage statements for flink:vkCreateComputePipelines and flink:vkCreateGraphicsPipelines (public issue 427). Internal Issues: * Add a Note to the <<invariance,Invariance>> appendix about a difference between OpenGL and Vulkan with regards to how primitives derived from offsets are handled (internal issue 355). * Add the +<<VK_KHR_get_physical_device_properties2>>+, +<<VK_KHR_maintenance1>>+, and +<<VK_KHR_shader_draw_parameters>>+ extensions (internal issue 448). * Add the +<<VK_EXT_shader_subgroup_vote>>+ and +<<VK_EXT_shader_subgroup_ballot>>+ extensions (internal issue 449). * Update the texture level-of-detail equation in the <<textures-scale-factor,Scale Factor Operation>> section to better approximate the ellipse major and minor axes (internal issue 547). * Forbid non-explicitly allowed uses of interface decorations in the introduction to the <<interfaces,Shader Interfaces>> chapter (internal issue 607). * Replace use of MathJax with KaTeX, for improved load-time performance as well as avoiding the scrolling-and-scrolling behavior due to MathJax asynchronous rendering when loading at an anchor inside the spec. This change also requires moving to HTML5 output for the spec instead of XHTML, and there is a visible difference in that the chapter navigation index is now in a scrollable sidebar instead of at the top of the document. We may or may not retain the nav sidebar based on feedback (internal issue 613). * Improve consistency of markup and formatting in extension appendices (internal issue 631). Other Issues: * Add explicit valid usage statements to slink:VkImageCopy requiring that the source and destination layer ranges be contained in their respective source and destination images. * Add valid usage language for swapchain of flink:vkAcquireNextImage. If the swapchain has been replaced, then it should not be passed to flink:vkAcquireNextImage. * Add a valid usage statement to flink:vkCreateImageView, that the image must have been created with an appropriate usage bit set. * Noted that slink:VkDisplayPresentInfoKHR is a valid extension of slink:VkPresentInfoKHR in the <<wsi_swapchain,WSI Swapchain>> section. * Update valid usage for flink:vkCmdSetViewport and flink:vkCmdSetScissor to account for the multiple viewport feature. If the feature is not enabled, the parameters for these functions have required values that are defined in the <<features-features-multiViewport,multiple viewports>> section of the spec but were not reflected in the valid usage text for these functions. * Add the +<<VK_EXT_swapchain_colorspace>>+ extension defining common color spaces.
2017-01-18 04:11:25 +00:00
exp_{shared} =
\begin{cases}
Change log for February 10, 2017 Vulkan 1.0.40 spec update: * Bump API patch number and header version number to 40 for this update. * There is a major build change in this release. We are now using the Ruby-based ``asciidoctor'' implementation, rather than the Python-based ``asciidoc'' implementation, to process the specification. While the actual specification markup changes were minimal, this requires a new set of build tools and a very different installation process, especially because we now use an experimental direct-to-PDF backend for Asciidoctor instead of Docbook->dblatex->PDF. It is no longer possible to build the Specification using asciidoc. See doc/specs/vulkan/README.adoc for some guidance on installing the new toolchain components. * There are some minor rendering issues in the PDF output due to teething problems with the asciidoctor toolchain, especially with mathematical equations. We are aware of these and working on them. Github Issues: * Updated sample code for the <<sparsememory-examples-basic,sparse resource binding example>> (public issue 97). * Modify line and point clipping behavior in the <<vertexpostproc-clipping, Primitive Clipping>> section to allow for pop-free behavior. The ability to check for which behavior is implemented may be added a future feature or extension (public issue 113). * Unify the discussions of implicit ordering throughout the spec, in particular in the new sections <<drawing-primitive-order, Primitive Order>>, <<primrast-order, Rasterization Order>>, and <<synchronization-implicit, Implicit Synchronization Guarantees>>; the discussion of <<synchronization-submission-order, submission order>>; and references elsewhere to these sections (public issue 133). * Clarify \<\<descriptorsets-compatibility,Pipeline Layout Compatibility>> language and introduce the term ``identically defined'' (public issue 164). * Add a dependency to the +VK_EXT_debug_marker+ extension that's needed to reuse the object type enum from +VK_EXT_debug_report+, and moves the definition of that enum into +VK_EXT_debug_report+ where it should be (public issue 409). * Remove redundant valid usage statement from slink:VkImageBlit (public issue 421). * Update GL_KHR_vulkan_glsl to allow the ternary operator to result in a specialization constant (public issue 424). * Fix valid usage for flink:VkPipelineShaderStageCreateInfo (public issue 426). * Correct typo in New Objects list for <<VK_EXT_debug_report>> (public issue 447). Internal Issues: * Moved to asciidoctor for spec builds (internal issue 121). * Update style guide to describe where to put new extensions-specific asciidoc files, and what to name them (internal issue 626). * Add src/spec/indexExt.py to autogenerate registry index entries linking into the 1.0-extensions specification, instead of maintaining the index manually. (internal issue 642). * Autogenerate extension dependencies and lists of all extensions and all KHR extensions from the "supported" attributes in +vk.xml+. Execute +make config/extDependency.sh+ from +doc/specs/vulkan+ when a supported extension is added to vk.xml, to regenerate the dependency script. The consequence is that specifying a single extension to the +makeExt+ script will automatically enable all extensions it depends on as well, and that the +makeAllExts+ and +makeKHR+ scripts do not need to be updated when a new extension is supported (internal issue 648). * Put extension appendices all at the same asciidoc section level, so KHR WSI extensions show up in the HTML index (internal issue 648). Other Issues: * Imbed images in the generated HTML specs instead of loading them from the images/ directory. * Fix missing EXT in extension name (ename:VK_EXT_SWAPCHAIN_COLOR_SPACE_EXTENSION_NAME). * Add new +VK_EXT_SMPTE_2086_metadata+ extension. * In the <<platformCreateSurface_xlib,Xlib Surface>> section of the +VK_KHR_xlib_surface+ specification, add language warning users that they always need to call code:XinitThreads. * Use the term "presentable image" (rather than "swapchain image") consistently in +VK_KHR_swapchain+ and related extensions, and add a glossary term defining it. * Relocate the valid usage for samples of flink:vkGetPhysicalDeviceSparseImageFormatProperties2KHR::pname:pFormatInfo to be below the flink:VkPhysicalDeviceSparseImageFormatInfo2KHR structure.
2017-02-11 04:37:39 +00:00
exp' & \text{for}\ 0 \leq max_{shared} < 2^N \\
exp'+1 & \text{for}\ max_{shared} = 2^N
Change log for January 23, 2017 Vulkan 1.0.39 spec update: * Bump API patch number and header version number to 39 for this update. Github Issues: * Clarified that only accesses via the specified buffer/image subresource ranges are included in the access scopes (public issue 306). * Add missing valid usage statements for flink:vkCreateComputePipelines and flink:vkCreateGraphicsPipelines (public issue 427). Internal Issues: * Add a Note to the <<invariance,Invariance>> appendix about a difference between OpenGL and Vulkan with regards to how primitives derived from offsets are handled (internal issue 355). * Add the +<<VK_KHR_get_physical_device_properties2>>+, +<<VK_KHR_maintenance1>>+, and +<<VK_KHR_shader_draw_parameters>>+ extensions (internal issue 448). * Add the +<<VK_EXT_shader_subgroup_vote>>+ and +<<VK_EXT_shader_subgroup_ballot>>+ extensions (internal issue 449). * Update the texture level-of-detail equation in the <<textures-scale-factor,Scale Factor Operation>> section to better approximate the ellipse major and minor axes (internal issue 547). * Forbid non-explicitly allowed uses of interface decorations in the introduction to the <<interfaces,Shader Interfaces>> chapter (internal issue 607). * Replace use of MathJax with KaTeX, for improved load-time performance as well as avoiding the scrolling-and-scrolling behavior due to MathJax asynchronous rendering when loading at an anchor inside the spec. This change also requires moving to HTML5 output for the spec instead of XHTML, and there is a visible difference in that the chapter navigation index is now in a scrollable sidebar instead of at the top of the document. We may or may not retain the nav sidebar based on feedback (internal issue 613). * Improve consistency of markup and formatting in extension appendices (internal issue 631). Other Issues: * Add explicit valid usage statements to slink:VkImageCopy requiring that the source and destination layer ranges be contained in their respective source and destination images. * Add valid usage language for swapchain of flink:vkAcquireNextImage. If the swapchain has been replaced, then it should not be passed to flink:vkAcquireNextImage. * Add a valid usage statement to flink:vkCreateImageView, that the image must have been created with an appropriate usage bit set. * Noted that slink:VkDisplayPresentInfoKHR is a valid extension of slink:VkPresentInfoKHR in the <<wsi_swapchain,WSI Swapchain>> section. * Update valid usage for flink:vkCmdSetViewport and flink:vkCmdSetScissor to account for the multiple viewport feature. If the feature is not enabled, the parameters for these functions have required values that are defined in the <<features-features-multiViewport,multiple viewports>> section of the spec but were not reflected in the valid usage text for these functions. * Add the +<<VK_EXT_swapchain_colorspace>>+ extension defining common color spaces.
2017-01-18 04:11:25 +00:00
\end{cases}
Change log for February 10, 2017 Vulkan 1.0.40 spec update: * Bump API patch number and header version number to 40 for this update. * There is a major build change in this release. We are now using the Ruby-based ``asciidoctor'' implementation, rather than the Python-based ``asciidoc'' implementation, to process the specification. While the actual specification markup changes were minimal, this requires a new set of build tools and a very different installation process, especially because we now use an experimental direct-to-PDF backend for Asciidoctor instead of Docbook->dblatex->PDF. It is no longer possible to build the Specification using asciidoc. See doc/specs/vulkan/README.adoc for some guidance on installing the new toolchain components. * There are some minor rendering issues in the PDF output due to teething problems with the asciidoctor toolchain, especially with mathematical equations. We are aware of these and working on them. Github Issues: * Updated sample code for the <<sparsememory-examples-basic,sparse resource binding example>> (public issue 97). * Modify line and point clipping behavior in the <<vertexpostproc-clipping, Primitive Clipping>> section to allow for pop-free behavior. The ability to check for which behavior is implemented may be added a future feature or extension (public issue 113). * Unify the discussions of implicit ordering throughout the spec, in particular in the new sections <<drawing-primitive-order, Primitive Order>>, <<primrast-order, Rasterization Order>>, and <<synchronization-implicit, Implicit Synchronization Guarantees>>; the discussion of <<synchronization-submission-order, submission order>>; and references elsewhere to these sections (public issue 133). * Clarify \<\<descriptorsets-compatibility,Pipeline Layout Compatibility>> language and introduce the term ``identically defined'' (public issue 164). * Add a dependency to the +VK_EXT_debug_marker+ extension that's needed to reuse the object type enum from +VK_EXT_debug_report+, and moves the definition of that enum into +VK_EXT_debug_report+ where it should be (public issue 409). * Remove redundant valid usage statement from slink:VkImageBlit (public issue 421). * Update GL_KHR_vulkan_glsl to allow the ternary operator to result in a specialization constant (public issue 424). * Fix valid usage for flink:VkPipelineShaderStageCreateInfo (public issue 426). * Correct typo in New Objects list for <<VK_EXT_debug_report>> (public issue 447). Internal Issues: * Moved to asciidoctor for spec builds (internal issue 121). * Update style guide to describe where to put new extensions-specific asciidoc files, and what to name them (internal issue 626). * Add src/spec/indexExt.py to autogenerate registry index entries linking into the 1.0-extensions specification, instead of maintaining the index manually. (internal issue 642). * Autogenerate extension dependencies and lists of all extensions and all KHR extensions from the "supported" attributes in +vk.xml+. Execute +make config/extDependency.sh+ from +doc/specs/vulkan+ when a supported extension is added to vk.xml, to regenerate the dependency script. The consequence is that specifying a single extension to the +makeExt+ script will automatically enable all extensions it depends on as well, and that the +makeAllExts+ and +makeKHR+ scripts do not need to be updated when a new extension is supported (internal issue 648). * Put extension appendices all at the same asciidoc section level, so KHR WSI extensions show up in the HTML index (internal issue 648). Other Issues: * Imbed images in the generated HTML specs instead of loading them from the images/ directory. * Fix missing EXT in extension name (ename:VK_EXT_SWAPCHAIN_COLOR_SPACE_EXTENSION_NAME). * Add new +VK_EXT_SMPTE_2086_metadata+ extension. * In the <<platformCreateSurface_xlib,Xlib Surface>> section of the +VK_KHR_xlib_surface+ specification, add language warning users that they always need to call code:XinitThreads. * Use the term "presentable image" (rather than "swapchain image") consistently in +VK_KHR_swapchain+ and related extensions, and add a glossary term defining it. * Relocate the valid usage for samples of flink:vkGetPhysicalDeviceSparseImageFormatProperties2KHR::pname:pFormatInfo to be below the flink:VkPhysicalDeviceSparseImageFormatInfo2KHR structure.
2017-02-11 04:37:39 +00:00
\end{aligned}
Change log for January 23, 2017 Vulkan 1.0.39 spec update: * Bump API patch number and header version number to 39 for this update. Github Issues: * Clarified that only accesses via the specified buffer/image subresource ranges are included in the access scopes (public issue 306). * Add missing valid usage statements for flink:vkCreateComputePipelines and flink:vkCreateGraphicsPipelines (public issue 427). Internal Issues: * Add a Note to the <<invariance,Invariance>> appendix about a difference between OpenGL and Vulkan with regards to how primitives derived from offsets are handled (internal issue 355). * Add the +<<VK_KHR_get_physical_device_properties2>>+, +<<VK_KHR_maintenance1>>+, and +<<VK_KHR_shader_draw_parameters>>+ extensions (internal issue 448). * Add the +<<VK_EXT_shader_subgroup_vote>>+ and +<<VK_EXT_shader_subgroup_ballot>>+ extensions (internal issue 449). * Update the texture level-of-detail equation in the <<textures-scale-factor,Scale Factor Operation>> section to better approximate the ellipse major and minor axes (internal issue 547). * Forbid non-explicitly allowed uses of interface decorations in the introduction to the <<interfaces,Shader Interfaces>> chapter (internal issue 607). * Replace use of MathJax with KaTeX, for improved load-time performance as well as avoiding the scrolling-and-scrolling behavior due to MathJax asynchronous rendering when loading at an anchor inside the spec. This change also requires moving to HTML5 output for the spec instead of XHTML, and there is a visible difference in that the chapter navigation index is now in a scrollable sidebar instead of at the top of the document. We may or may not retain the nav sidebar based on feedback (internal issue 613). * Improve consistency of markup and formatting in extension appendices (internal issue 631). Other Issues: * Add explicit valid usage statements to slink:VkImageCopy requiring that the source and destination layer ranges be contained in their respective source and destination images. * Add valid usage language for swapchain of flink:vkAcquireNextImage. If the swapchain has been replaced, then it should not be passed to flink:vkAcquireNextImage. * Add a valid usage statement to flink:vkCreateImageView, that the image must have been created with an appropriate usage bit set. * Noted that slink:VkDisplayPresentInfoKHR is a valid extension of slink:VkPresentInfoKHR in the <<wsi_swapchain,WSI Swapchain>> section. * Update valid usage for flink:vkCmdSetViewport and flink:vkCmdSetScissor to account for the multiple viewport feature. If the feature is not enabled, the parameters for these functions have required values that are defined in the <<features-features-multiViewport,multiple viewports>> section of the spec but were not reflected in the valid usage text for these functions. * Add the +<<VK_EXT_swapchain_colorspace>>+ extension defining common color spaces.
2017-01-18 04:11:25 +00:00
+++++++++++++++++++
=== latexmath block 25
[latexmath]
+++++++++++++++++++
Change log for February 10, 2017 Vulkan 1.0.40 spec update: * Bump API patch number and header version number to 40 for this update. * There is a major build change in this release. We are now using the Ruby-based ``asciidoctor'' implementation, rather than the Python-based ``asciidoc'' implementation, to process the specification. While the actual specification markup changes were minimal, this requires a new set of build tools and a very different installation process, especially because we now use an experimental direct-to-PDF backend for Asciidoctor instead of Docbook->dblatex->PDF. It is no longer possible to build the Specification using asciidoc. See doc/specs/vulkan/README.adoc for some guidance on installing the new toolchain components. * There are some minor rendering issues in the PDF output due to teething problems with the asciidoctor toolchain, especially with mathematical equations. We are aware of these and working on them. Github Issues: * Updated sample code for the <<sparsememory-examples-basic,sparse resource binding example>> (public issue 97). * Modify line and point clipping behavior in the <<vertexpostproc-clipping, Primitive Clipping>> section to allow for pop-free behavior. The ability to check for which behavior is implemented may be added a future feature or extension (public issue 113). * Unify the discussions of implicit ordering throughout the spec, in particular in the new sections <<drawing-primitive-order, Primitive Order>>, <<primrast-order, Rasterization Order>>, and <<synchronization-implicit, Implicit Synchronization Guarantees>>; the discussion of <<synchronization-submission-order, submission order>>; and references elsewhere to these sections (public issue 133). * Clarify \<\<descriptorsets-compatibility,Pipeline Layout Compatibility>> language and introduce the term ``identically defined'' (public issue 164). * Add a dependency to the +VK_EXT_debug_marker+ extension that's needed to reuse the object type enum from +VK_EXT_debug_report+, and moves the definition of that enum into +VK_EXT_debug_report+ where it should be (public issue 409). * Remove redundant valid usage statement from slink:VkImageBlit (public issue 421). * Update GL_KHR_vulkan_glsl to allow the ternary operator to result in a specialization constant (public issue 424). * Fix valid usage for flink:VkPipelineShaderStageCreateInfo (public issue 426). * Correct typo in New Objects list for <<VK_EXT_debug_report>> (public issue 447). Internal Issues: * Moved to asciidoctor for spec builds (internal issue 121). * Update style guide to describe where to put new extensions-specific asciidoc files, and what to name them (internal issue 626). * Add src/spec/indexExt.py to autogenerate registry index entries linking into the 1.0-extensions specification, instead of maintaining the index manually. (internal issue 642). * Autogenerate extension dependencies and lists of all extensions and all KHR extensions from the "supported" attributes in +vk.xml+. Execute +make config/extDependency.sh+ from +doc/specs/vulkan+ when a supported extension is added to vk.xml, to regenerate the dependency script. The consequence is that specifying a single extension to the +makeExt+ script will automatically enable all extensions it depends on as well, and that the +makeAllExts+ and +makeKHR+ scripts do not need to be updated when a new extension is supported (internal issue 648). * Put extension appendices all at the same asciidoc section level, so KHR WSI extensions show up in the HTML index (internal issue 648). Other Issues: * Imbed images in the generated HTML specs instead of loading them from the images/ directory. * Fix missing EXT in extension name (ename:VK_EXT_SWAPCHAIN_COLOR_SPACE_EXTENSION_NAME). * Add new +VK_EXT_SMPTE_2086_metadata+ extension. * In the <<platformCreateSurface_xlib,Xlib Surface>> section of the +VK_KHR_xlib_surface+ specification, add language warning users that they always need to call code:XinitThreads. * Use the term "presentable image" (rather than "swapchain image") consistently in +VK_KHR_swapchain+ and related extensions, and add a glossary term defining it. * Relocate the valid usage for samples of flink:vkGetPhysicalDeviceSparseImageFormatProperties2KHR::pname:pFormatInfo to be below the flink:VkPhysicalDeviceSparseImageFormatInfo2KHR structure.
2017-02-11 04:37:39 +00:00
\begin{aligned}
Change log for January 23, 2017 Vulkan 1.0.39 spec update: * Bump API patch number and header version number to 39 for this update. Github Issues: * Clarified that only accesses via the specified buffer/image subresource ranges are included in the access scopes (public issue 306). * Add missing valid usage statements for flink:vkCreateComputePipelines and flink:vkCreateGraphicsPipelines (public issue 427). Internal Issues: * Add a Note to the <<invariance,Invariance>> appendix about a difference between OpenGL and Vulkan with regards to how primitives derived from offsets are handled (internal issue 355). * Add the +<<VK_KHR_get_physical_device_properties2>>+, +<<VK_KHR_maintenance1>>+, and +<<VK_KHR_shader_draw_parameters>>+ extensions (internal issue 448). * Add the +<<VK_EXT_shader_subgroup_vote>>+ and +<<VK_EXT_shader_subgroup_ballot>>+ extensions (internal issue 449). * Update the texture level-of-detail equation in the <<textures-scale-factor,Scale Factor Operation>> section to better approximate the ellipse major and minor axes (internal issue 547). * Forbid non-explicitly allowed uses of interface decorations in the introduction to the <<interfaces,Shader Interfaces>> chapter (internal issue 607). * Replace use of MathJax with KaTeX, for improved load-time performance as well as avoiding the scrolling-and-scrolling behavior due to MathJax asynchronous rendering when loading at an anchor inside the spec. This change also requires moving to HTML5 output for the spec instead of XHTML, and there is a visible difference in that the chapter navigation index is now in a scrollable sidebar instead of at the top of the document. We may or may not retain the nav sidebar based on feedback (internal issue 613). * Improve consistency of markup and formatting in extension appendices (internal issue 631). Other Issues: * Add explicit valid usage statements to slink:VkImageCopy requiring that the source and destination layer ranges be contained in their respective source and destination images. * Add valid usage language for swapchain of flink:vkAcquireNextImage. If the swapchain has been replaced, then it should not be passed to flink:vkAcquireNextImage. * Add a valid usage statement to flink:vkCreateImageView, that the image must have been created with an appropriate usage bit set. * Noted that slink:VkDisplayPresentInfoKHR is a valid extension of slink:VkPresentInfoKHR in the <<wsi_swapchain,WSI Swapchain>> section. * Update valid usage for flink:vkCmdSetViewport and flink:vkCmdSetScissor to account for the multiple viewport feature. If the feature is not enabled, the parameters for these functions have required values that are defined in the <<features-features-multiViewport,multiple viewports>> section of the spec but were not reflected in the valid usage text for these functions. * Add the +<<VK_EXT_swapchain_colorspace>>+ extension defining common color spaces.
2017-01-18 04:11:25 +00:00
red_{shared} & =
\left \lfloor
\frac{red_{clamped}}{2^{(exp_{shared}-B-N)}}+ \frac{1}{2}
\right \rfloor \\
green_{shared} & =
\left \lfloor
\frac{green_{clamped}}{2^{(exp_{shared}-B-N)}}+ \frac{1}{2}
\right \rfloor \\
blue_{shared} & =
\left \lfloor
\frac{blue_{clamped}}{2^{(exp_{shared}-B-N)}}+ \frac{1}{2}
\right \rfloor
Change log for February 10, 2017 Vulkan 1.0.40 spec update: * Bump API patch number and header version number to 40 for this update. * There is a major build change in this release. We are now using the Ruby-based ``asciidoctor'' implementation, rather than the Python-based ``asciidoc'' implementation, to process the specification. While the actual specification markup changes were minimal, this requires a new set of build tools and a very different installation process, especially because we now use an experimental direct-to-PDF backend for Asciidoctor instead of Docbook->dblatex->PDF. It is no longer possible to build the Specification using asciidoc. See doc/specs/vulkan/README.adoc for some guidance on installing the new toolchain components. * There are some minor rendering issues in the PDF output due to teething problems with the asciidoctor toolchain, especially with mathematical equations. We are aware of these and working on them. Github Issues: * Updated sample code for the <<sparsememory-examples-basic,sparse resource binding example>> (public issue 97). * Modify line and point clipping behavior in the <<vertexpostproc-clipping, Primitive Clipping>> section to allow for pop-free behavior. The ability to check for which behavior is implemented may be added a future feature or extension (public issue 113). * Unify the discussions of implicit ordering throughout the spec, in particular in the new sections <<drawing-primitive-order, Primitive Order>>, <<primrast-order, Rasterization Order>>, and <<synchronization-implicit, Implicit Synchronization Guarantees>>; the discussion of <<synchronization-submission-order, submission order>>; and references elsewhere to these sections (public issue 133). * Clarify \<\<descriptorsets-compatibility,Pipeline Layout Compatibility>> language and introduce the term ``identically defined'' (public issue 164). * Add a dependency to the +VK_EXT_debug_marker+ extension that's needed to reuse the object type enum from +VK_EXT_debug_report+, and moves the definition of that enum into +VK_EXT_debug_report+ where it should be (public issue 409). * Remove redundant valid usage statement from slink:VkImageBlit (public issue 421). * Update GL_KHR_vulkan_glsl to allow the ternary operator to result in a specialization constant (public issue 424). * Fix valid usage for flink:VkPipelineShaderStageCreateInfo (public issue 426). * Correct typo in New Objects list for <<VK_EXT_debug_report>> (public issue 447). Internal Issues: * Moved to asciidoctor for spec builds (internal issue 121). * Update style guide to describe where to put new extensions-specific asciidoc files, and what to name them (internal issue 626). * Add src/spec/indexExt.py to autogenerate registry index entries linking into the 1.0-extensions specification, instead of maintaining the index manually. (internal issue 642). * Autogenerate extension dependencies and lists of all extensions and all KHR extensions from the "supported" attributes in +vk.xml+. Execute +make config/extDependency.sh+ from +doc/specs/vulkan+ when a supported extension is added to vk.xml, to regenerate the dependency script. The consequence is that specifying a single extension to the +makeExt+ script will automatically enable all extensions it depends on as well, and that the +makeAllExts+ and +makeKHR+ scripts do not need to be updated when a new extension is supported (internal issue 648). * Put extension appendices all at the same asciidoc section level, so KHR WSI extensions show up in the HTML index (internal issue 648). Other Issues: * Imbed images in the generated HTML specs instead of loading them from the images/ directory. * Fix missing EXT in extension name (ename:VK_EXT_SWAPCHAIN_COLOR_SPACE_EXTENSION_NAME). * Add new +VK_EXT_SMPTE_2086_metadata+ extension. * In the <<platformCreateSurface_xlib,Xlib Surface>> section of the +VK_KHR_xlib_surface+ specification, add language warning users that they always need to call code:XinitThreads. * Use the term "presentable image" (rather than "swapchain image") consistently in +VK_KHR_swapchain+ and related extensions, and add a glossary term defining it. * Relocate the valid usage for samples of flink:vkGetPhysicalDeviceSparseImageFormatProperties2KHR::pname:pFormatInfo to be below the flink:VkPhysicalDeviceSparseImageFormatInfo2KHR structure.
2017-02-11 04:37:39 +00:00
\end{aligned}
Change log for January 23, 2017 Vulkan 1.0.39 spec update: * Bump API patch number and header version number to 39 for this update. Github Issues: * Clarified that only accesses via the specified buffer/image subresource ranges are included in the access scopes (public issue 306). * Add missing valid usage statements for flink:vkCreateComputePipelines and flink:vkCreateGraphicsPipelines (public issue 427). Internal Issues: * Add a Note to the <<invariance,Invariance>> appendix about a difference between OpenGL and Vulkan with regards to how primitives derived from offsets are handled (internal issue 355). * Add the +<<VK_KHR_get_physical_device_properties2>>+, +<<VK_KHR_maintenance1>>+, and +<<VK_KHR_shader_draw_parameters>>+ extensions (internal issue 448). * Add the +<<VK_EXT_shader_subgroup_vote>>+ and +<<VK_EXT_shader_subgroup_ballot>>+ extensions (internal issue 449). * Update the texture level-of-detail equation in the <<textures-scale-factor,Scale Factor Operation>> section to better approximate the ellipse major and minor axes (internal issue 547). * Forbid non-explicitly allowed uses of interface decorations in the introduction to the <<interfaces,Shader Interfaces>> chapter (internal issue 607). * Replace use of MathJax with KaTeX, for improved load-time performance as well as avoiding the scrolling-and-scrolling behavior due to MathJax asynchronous rendering when loading at an anchor inside the spec. This change also requires moving to HTML5 output for the spec instead of XHTML, and there is a visible difference in that the chapter navigation index is now in a scrollable sidebar instead of at the top of the document. We may or may not retain the nav sidebar based on feedback (internal issue 613). * Improve consistency of markup and formatting in extension appendices (internal issue 631). Other Issues: * Add explicit valid usage statements to slink:VkImageCopy requiring that the source and destination layer ranges be contained in their respective source and destination images. * Add valid usage language for swapchain of flink:vkAcquireNextImage. If the swapchain has been replaced, then it should not be passed to flink:vkAcquireNextImage. * Add a valid usage statement to flink:vkCreateImageView, that the image must have been created with an appropriate usage bit set. * Noted that slink:VkDisplayPresentInfoKHR is a valid extension of slink:VkPresentInfoKHR in the <<wsi_swapchain,WSI Swapchain>> section. * Update valid usage for flink:vkCmdSetViewport and flink:vkCmdSetScissor to account for the multiple viewport feature. If the feature is not enabled, the parameters for these functions have required values that are defined in the <<features-features-multiViewport,multiple viewports>> section of the spec but were not reflected in the valid usage text for these functions. * Add the +<<VK_EXT_swapchain_colorspace>>+ extension defining common color spaces.
2017-01-18 04:11:25 +00:00
+++++++++++++++++++
=== latexmath block 26
[latexmath]
+++++++++++++++++++
Change log for February 10, 2017 Vulkan 1.0.40 spec update: * Bump API patch number and header version number to 40 for this update. * There is a major build change in this release. We are now using the Ruby-based ``asciidoctor'' implementation, rather than the Python-based ``asciidoc'' implementation, to process the specification. While the actual specification markup changes were minimal, this requires a new set of build tools and a very different installation process, especially because we now use an experimental direct-to-PDF backend for Asciidoctor instead of Docbook->dblatex->PDF. It is no longer possible to build the Specification using asciidoc. See doc/specs/vulkan/README.adoc for some guidance on installing the new toolchain components. * There are some minor rendering issues in the PDF output due to teething problems with the asciidoctor toolchain, especially with mathematical equations. We are aware of these and working on them. Github Issues: * Updated sample code for the <<sparsememory-examples-basic,sparse resource binding example>> (public issue 97). * Modify line and point clipping behavior in the <<vertexpostproc-clipping, Primitive Clipping>> section to allow for pop-free behavior. The ability to check for which behavior is implemented may be added a future feature or extension (public issue 113). * Unify the discussions of implicit ordering throughout the spec, in particular in the new sections <<drawing-primitive-order, Primitive Order>>, <<primrast-order, Rasterization Order>>, and <<synchronization-implicit, Implicit Synchronization Guarantees>>; the discussion of <<synchronization-submission-order, submission order>>; and references elsewhere to these sections (public issue 133). * Clarify \<\<descriptorsets-compatibility,Pipeline Layout Compatibility>> language and introduce the term ``identically defined'' (public issue 164). * Add a dependency to the +VK_EXT_debug_marker+ extension that's needed to reuse the object type enum from +VK_EXT_debug_report+, and moves the definition of that enum into +VK_EXT_debug_report+ where it should be (public issue 409). * Remove redundant valid usage statement from slink:VkImageBlit (public issue 421). * Update GL_KHR_vulkan_glsl to allow the ternary operator to result in a specialization constant (public issue 424). * Fix valid usage for flink:VkPipelineShaderStageCreateInfo (public issue 426). * Correct typo in New Objects list for <<VK_EXT_debug_report>> (public issue 447). Internal Issues: * Moved to asciidoctor for spec builds (internal issue 121). * Update style guide to describe where to put new extensions-specific asciidoc files, and what to name them (internal issue 626). * Add src/spec/indexExt.py to autogenerate registry index entries linking into the 1.0-extensions specification, instead of maintaining the index manually. (internal issue 642). * Autogenerate extension dependencies and lists of all extensions and all KHR extensions from the "supported" attributes in +vk.xml+. Execute +make config/extDependency.sh+ from +doc/specs/vulkan+ when a supported extension is added to vk.xml, to regenerate the dependency script. The consequence is that specifying a single extension to the +makeExt+ script will automatically enable all extensions it depends on as well, and that the +makeAllExts+ and +makeKHR+ scripts do not need to be updated when a new extension is supported (internal issue 648). * Put extension appendices all at the same asciidoc section level, so KHR WSI extensions show up in the HTML index (internal issue 648). Other Issues: * Imbed images in the generated HTML specs instead of loading them from the images/ directory. * Fix missing EXT in extension name (ename:VK_EXT_SWAPCHAIN_COLOR_SPACE_EXTENSION_NAME). * Add new +VK_EXT_SMPTE_2086_metadata+ extension. * In the <<platformCreateSurface_xlib,Xlib Surface>> section of the +VK_KHR_xlib_surface+ specification, add language warning users that they always need to call code:XinitThreads. * Use the term "presentable image" (rather than "swapchain image") consistently in +VK_KHR_swapchain+ and related extensions, and add a glossary term defining it. * Relocate the valid usage for samples of flink:vkGetPhysicalDeviceSparseImageFormatProperties2KHR::pname:pFormatInfo to be below the flink:VkPhysicalDeviceSparseImageFormatInfo2KHR structure.
2017-02-11 04:37:39 +00:00
\begin{aligned}
Change log for January 23, 2017 Vulkan 1.0.39 spec update: * Bump API patch number and header version number to 39 for this update. Github Issues: * Clarified that only accesses via the specified buffer/image subresource ranges are included in the access scopes (public issue 306). * Add missing valid usage statements for flink:vkCreateComputePipelines and flink:vkCreateGraphicsPipelines (public issue 427). Internal Issues: * Add a Note to the <<invariance,Invariance>> appendix about a difference between OpenGL and Vulkan with regards to how primitives derived from offsets are handled (internal issue 355). * Add the +<<VK_KHR_get_physical_device_properties2>>+, +<<VK_KHR_maintenance1>>+, and +<<VK_KHR_shader_draw_parameters>>+ extensions (internal issue 448). * Add the +<<VK_EXT_shader_subgroup_vote>>+ and +<<VK_EXT_shader_subgroup_ballot>>+ extensions (internal issue 449). * Update the texture level-of-detail equation in the <<textures-scale-factor,Scale Factor Operation>> section to better approximate the ellipse major and minor axes (internal issue 547). * Forbid non-explicitly allowed uses of interface decorations in the introduction to the <<interfaces,Shader Interfaces>> chapter (internal issue 607). * Replace use of MathJax with KaTeX, for improved load-time performance as well as avoiding the scrolling-and-scrolling behavior due to MathJax asynchronous rendering when loading at an anchor inside the spec. This change also requires moving to HTML5 output for the spec instead of XHTML, and there is a visible difference in that the chapter navigation index is now in a scrollable sidebar instead of at the top of the document. We may or may not retain the nav sidebar based on feedback (internal issue 613). * Improve consistency of markup and formatting in extension appendices (internal issue 631). Other Issues: * Add explicit valid usage statements to slink:VkImageCopy requiring that the source and destination layer ranges be contained in their respective source and destination images. * Add valid usage language for swapchain of flink:vkAcquireNextImage. If the swapchain has been replaced, then it should not be passed to flink:vkAcquireNextImage. * Add a valid usage statement to flink:vkCreateImageView, that the image must have been created with an appropriate usage bit set. * Noted that slink:VkDisplayPresentInfoKHR is a valid extension of slink:VkPresentInfoKHR in the <<wsi_swapchain,WSI Swapchain>> section. * Update valid usage for flink:vkCmdSetViewport and flink:vkCmdSetScissor to account for the multiple viewport feature. If the feature is not enabled, the parameters for these functions have required values that are defined in the <<features-features-multiViewport,multiple viewports>> section of the spec but were not reflected in the valid usage text for these functions. * Add the +<<VK_EXT_swapchain_colorspace>>+ extension defining common color spaces.
2017-01-18 04:11:25 +00:00
D & = 1.0 &
\begin{cases}
D_{ref} \leq D & \text{for LEQUAL} \\
D_{ref} \geq D & \text{for GEQUAL} \\
D_{ref} < D & \text{for LESS} \\
D_{ref} > D & \text{for GREATER} \\
D_{ref} = D & \text{for EQUAL} \\
D_{ref} \neq D & \text{for NOTEQUAL} \\
true & \text{for ALWAYS} \\
false & \text{for NEVER}
\end{cases} \\
D & = 0.0 & \text{otherwise}
Change log for February 10, 2017 Vulkan 1.0.40 spec update: * Bump API patch number and header version number to 40 for this update. * There is a major build change in this release. We are now using the Ruby-based ``asciidoctor'' implementation, rather than the Python-based ``asciidoc'' implementation, to process the specification. While the actual specification markup changes were minimal, this requires a new set of build tools and a very different installation process, especially because we now use an experimental direct-to-PDF backend for Asciidoctor instead of Docbook->dblatex->PDF. It is no longer possible to build the Specification using asciidoc. See doc/specs/vulkan/README.adoc for some guidance on installing the new toolchain components. * There are some minor rendering issues in the PDF output due to teething problems with the asciidoctor toolchain, especially with mathematical equations. We are aware of these and working on them. Github Issues: * Updated sample code for the <<sparsememory-examples-basic,sparse resource binding example>> (public issue 97). * Modify line and point clipping behavior in the <<vertexpostproc-clipping, Primitive Clipping>> section to allow for pop-free behavior. The ability to check for which behavior is implemented may be added a future feature or extension (public issue 113). * Unify the discussions of implicit ordering throughout the spec, in particular in the new sections <<drawing-primitive-order, Primitive Order>>, <<primrast-order, Rasterization Order>>, and <<synchronization-implicit, Implicit Synchronization Guarantees>>; the discussion of <<synchronization-submission-order, submission order>>; and references elsewhere to these sections (public issue 133). * Clarify \<\<descriptorsets-compatibility,Pipeline Layout Compatibility>> language and introduce the term ``identically defined'' (public issue 164). * Add a dependency to the +VK_EXT_debug_marker+ extension that's needed to reuse the object type enum from +VK_EXT_debug_report+, and moves the definition of that enum into +VK_EXT_debug_report+ where it should be (public issue 409). * Remove redundant valid usage statement from slink:VkImageBlit (public issue 421). * Update GL_KHR_vulkan_glsl to allow the ternary operator to result in a specialization constant (public issue 424). * Fix valid usage for flink:VkPipelineShaderStageCreateInfo (public issue 426). * Correct typo in New Objects list for <<VK_EXT_debug_report>> (public issue 447). Internal Issues: * Moved to asciidoctor for spec builds (internal issue 121). * Update style guide to describe where to put new extensions-specific asciidoc files, and what to name them (internal issue 626). * Add src/spec/indexExt.py to autogenerate registry index entries linking into the 1.0-extensions specification, instead of maintaining the index manually. (internal issue 642). * Autogenerate extension dependencies and lists of all extensions and all KHR extensions from the "supported" attributes in +vk.xml+. Execute +make config/extDependency.sh+ from +doc/specs/vulkan+ when a supported extension is added to vk.xml, to regenerate the dependency script. The consequence is that specifying a single extension to the +makeExt+ script will automatically enable all extensions it depends on as well, and that the +makeAllExts+ and +makeKHR+ scripts do not need to be updated when a new extension is supported (internal issue 648). * Put extension appendices all at the same asciidoc section level, so KHR WSI extensions show up in the HTML index (internal issue 648). Other Issues: * Imbed images in the generated HTML specs instead of loading them from the images/ directory. * Fix missing EXT in extension name (ename:VK_EXT_SWAPCHAIN_COLOR_SPACE_EXTENSION_NAME). * Add new +VK_EXT_SMPTE_2086_metadata+ extension. * In the <<platformCreateSurface_xlib,Xlib Surface>> section of the +VK_KHR_xlib_surface+ specification, add language warning users that they always need to call code:XinitThreads. * Use the term "presentable image" (rather than "swapchain image") consistently in +VK_KHR_swapchain+ and related extensions, and add a glossary term defining it. * Relocate the valid usage for samples of flink:vkGetPhysicalDeviceSparseImageFormatProperties2KHR::pname:pFormatInfo to be below the flink:VkPhysicalDeviceSparseImageFormatInfo2KHR structure.
2017-02-11 04:37:39 +00:00
\end{aligned}
Change log for January 23, 2017 Vulkan 1.0.39 spec update: * Bump API patch number and header version number to 39 for this update. Github Issues: * Clarified that only accesses via the specified buffer/image subresource ranges are included in the access scopes (public issue 306). * Add missing valid usage statements for flink:vkCreateComputePipelines and flink:vkCreateGraphicsPipelines (public issue 427). Internal Issues: * Add a Note to the <<invariance,Invariance>> appendix about a difference between OpenGL and Vulkan with regards to how primitives derived from offsets are handled (internal issue 355). * Add the +<<VK_KHR_get_physical_device_properties2>>+, +<<VK_KHR_maintenance1>>+, and +<<VK_KHR_shader_draw_parameters>>+ extensions (internal issue 448). * Add the +<<VK_EXT_shader_subgroup_vote>>+ and +<<VK_EXT_shader_subgroup_ballot>>+ extensions (internal issue 449). * Update the texture level-of-detail equation in the <<textures-scale-factor,Scale Factor Operation>> section to better approximate the ellipse major and minor axes (internal issue 547). * Forbid non-explicitly allowed uses of interface decorations in the introduction to the <<interfaces,Shader Interfaces>> chapter (internal issue 607). * Replace use of MathJax with KaTeX, for improved load-time performance as well as avoiding the scrolling-and-scrolling behavior due to MathJax asynchronous rendering when loading at an anchor inside the spec. This change also requires moving to HTML5 output for the spec instead of XHTML, and there is a visible difference in that the chapter navigation index is now in a scrollable sidebar instead of at the top of the document. We may or may not retain the nav sidebar based on feedback (internal issue 613). * Improve consistency of markup and formatting in extension appendices (internal issue 631). Other Issues: * Add explicit valid usage statements to slink:VkImageCopy requiring that the source and destination layer ranges be contained in their respective source and destination images. * Add valid usage language for swapchain of flink:vkAcquireNextImage. If the swapchain has been replaced, then it should not be passed to flink:vkAcquireNextImage. * Add a valid usage statement to flink:vkCreateImageView, that the image must have been created with an appropriate usage bit set. * Noted that slink:VkDisplayPresentInfoKHR is a valid extension of slink:VkPresentInfoKHR in the <<wsi_swapchain,WSI Swapchain>> section. * Update valid usage for flink:vkCmdSetViewport and flink:vkCmdSetScissor to account for the multiple viewport feature. If the feature is not enabled, the parameters for these functions have required values that are defined in the <<features-features-multiViewport,multiple viewports>> section of the spec but were not reflected in the valid usage text for these functions. * Add the +<<VK_EXT_swapchain_colorspace>>+ extension defining common color spaces.
2017-01-18 04:11:25 +00:00
+++++++++++++++++++
=== latexmath block 27
[latexmath]
+++++++++++++++++++
Change log for February 10, 2017 Vulkan 1.0.40 spec update: * Bump API patch number and header version number to 40 for this update. * There is a major build change in this release. We are now using the Ruby-based ``asciidoctor'' implementation, rather than the Python-based ``asciidoc'' implementation, to process the specification. While the actual specification markup changes were minimal, this requires a new set of build tools and a very different installation process, especially because we now use an experimental direct-to-PDF backend for Asciidoctor instead of Docbook->dblatex->PDF. It is no longer possible to build the Specification using asciidoc. See doc/specs/vulkan/README.adoc for some guidance on installing the new toolchain components. * There are some minor rendering issues in the PDF output due to teething problems with the asciidoctor toolchain, especially with mathematical equations. We are aware of these and working on them. Github Issues: * Updated sample code for the <<sparsememory-examples-basic,sparse resource binding example>> (public issue 97). * Modify line and point clipping behavior in the <<vertexpostproc-clipping, Primitive Clipping>> section to allow for pop-free behavior. The ability to check for which behavior is implemented may be added a future feature or extension (public issue 113). * Unify the discussions of implicit ordering throughout the spec, in particular in the new sections <<drawing-primitive-order, Primitive Order>>, <<primrast-order, Rasterization Order>>, and <<synchronization-implicit, Implicit Synchronization Guarantees>>; the discussion of <<synchronization-submission-order, submission order>>; and references elsewhere to these sections (public issue 133). * Clarify \<\<descriptorsets-compatibility,Pipeline Layout Compatibility>> language and introduce the term ``identically defined'' (public issue 164). * Add a dependency to the +VK_EXT_debug_marker+ extension that's needed to reuse the object type enum from +VK_EXT_debug_report+, and moves the definition of that enum into +VK_EXT_debug_report+ where it should be (public issue 409). * Remove redundant valid usage statement from slink:VkImageBlit (public issue 421). * Update GL_KHR_vulkan_glsl to allow the ternary operator to result in a specialization constant (public issue 424). * Fix valid usage for flink:VkPipelineShaderStageCreateInfo (public issue 426). * Correct typo in New Objects list for <<VK_EXT_debug_report>> (public issue 447). Internal Issues: * Moved to asciidoctor for spec builds (internal issue 121). * Update style guide to describe where to put new extensions-specific asciidoc files, and what to name them (internal issue 626). * Add src/spec/indexExt.py to autogenerate registry index entries linking into the 1.0-extensions specification, instead of maintaining the index manually. (internal issue 642). * Autogenerate extension dependencies and lists of all extensions and all KHR extensions from the "supported" attributes in +vk.xml+. Execute +make config/extDependency.sh+ from +doc/specs/vulkan+ when a supported extension is added to vk.xml, to regenerate the dependency script. The consequence is that specifying a single extension to the +makeExt+ script will automatically enable all extensions it depends on as well, and that the +makeAllExts+ and +makeKHR+ scripts do not need to be updated when a new extension is supported (internal issue 648). * Put extension appendices all at the same asciidoc section level, so KHR WSI extensions show up in the HTML index (internal issue 648). Other Issues: * Imbed images in the generated HTML specs instead of loading them from the images/ directory. * Fix missing EXT in extension name (ename:VK_EXT_SWAPCHAIN_COLOR_SPACE_EXTENSION_NAME). * Add new +VK_EXT_SMPTE_2086_metadata+ extension. * In the <<platformCreateSurface_xlib,Xlib Surface>> section of the +VK_KHR_xlib_surface+ specification, add language warning users that they always need to call code:XinitThreads. * Use the term "presentable image" (rather than "swapchain image") consistently in +VK_KHR_swapchain+ and related extensions, and add a glossary term defining it. * Relocate the valid usage for samples of flink:vkGetPhysicalDeviceSparseImageFormatProperties2KHR::pname:pFormatInfo to be below the flink:VkPhysicalDeviceSparseImageFormatInfo2KHR structure.
2017-02-11 04:37:39 +00:00
\begin{aligned}
Change log for January 23, 2017 Vulkan 1.0.39 spec update: * Bump API patch number and header version number to 39 for this update. Github Issues: * Clarified that only accesses via the specified buffer/image subresource ranges are included in the access scopes (public issue 306). * Add missing valid usage statements for flink:vkCreateComputePipelines and flink:vkCreateGraphicsPipelines (public issue 427). Internal Issues: * Add a Note to the <<invariance,Invariance>> appendix about a difference between OpenGL and Vulkan with regards to how primitives derived from offsets are handled (internal issue 355). * Add the +<<VK_KHR_get_physical_device_properties2>>+, +<<VK_KHR_maintenance1>>+, and +<<VK_KHR_shader_draw_parameters>>+ extensions (internal issue 448). * Add the +<<VK_EXT_shader_subgroup_vote>>+ and +<<VK_EXT_shader_subgroup_ballot>>+ extensions (internal issue 449). * Update the texture level-of-detail equation in the <<textures-scale-factor,Scale Factor Operation>> section to better approximate the ellipse major and minor axes (internal issue 547). * Forbid non-explicitly allowed uses of interface decorations in the introduction to the <<interfaces,Shader Interfaces>> chapter (internal issue 607). * Replace use of MathJax with KaTeX, for improved load-time performance as well as avoiding the scrolling-and-scrolling behavior due to MathJax asynchronous rendering when loading at an anchor inside the spec. This change also requires moving to HTML5 output for the spec instead of XHTML, and there is a visible difference in that the chapter navigation index is now in a scrollable sidebar instead of at the top of the document. We may or may not retain the nav sidebar based on feedback (internal issue 613). * Improve consistency of markup and formatting in extension appendices (internal issue 631). Other Issues: * Add explicit valid usage statements to slink:VkImageCopy requiring that the source and destination layer ranges be contained in their respective source and destination images. * Add valid usage language for swapchain of flink:vkAcquireNextImage. If the swapchain has been replaced, then it should not be passed to flink:vkAcquireNextImage. * Add a valid usage statement to flink:vkCreateImageView, that the image must have been created with an appropriate usage bit set. * Noted that slink:VkDisplayPresentInfoKHR is a valid extension of slink:VkPresentInfoKHR in the <<wsi_swapchain,WSI Swapchain>> section. * Update valid usage for flink:vkCmdSetViewport and flink:vkCmdSetScissor to account for the multiple viewport feature. If the feature is not enabled, the parameters for these functions have required values that are defined in the <<features-features-multiViewport,multiple viewports>> section of the spec but were not reflected in the valid usage text for these functions. * Add the +<<VK_EXT_swapchain_colorspace>>+ extension defining common color spaces.
2017-01-18 04:11:25 +00:00
C'_{rgba}[R] & =
\begin{cases}
C_{rgba}[R] & \text{for RED swizzle} \\
C_{rgba}[G] & \text{for GREEN swizzle} \\
C_{rgba}[B] & \text{for BLUE swizzle} \\
C_{rgba}[A] & \text{for ALPHA swizzle} \\
0 & \text{for ZERO swizzle} \\
one & \text{for ONE swizzle} \\
C_{rgba}[R] & \text{for IDENTITY swizzle}
\end{cases}
Change log for February 10, 2017 Vulkan 1.0.40 spec update: * Bump API patch number and header version number to 40 for this update. * There is a major build change in this release. We are now using the Ruby-based ``asciidoctor'' implementation, rather than the Python-based ``asciidoc'' implementation, to process the specification. While the actual specification markup changes were minimal, this requires a new set of build tools and a very different installation process, especially because we now use an experimental direct-to-PDF backend for Asciidoctor instead of Docbook->dblatex->PDF. It is no longer possible to build the Specification using asciidoc. See doc/specs/vulkan/README.adoc for some guidance on installing the new toolchain components. * There are some minor rendering issues in the PDF output due to teething problems with the asciidoctor toolchain, especially with mathematical equations. We are aware of these and working on them. Github Issues: * Updated sample code for the <<sparsememory-examples-basic,sparse resource binding example>> (public issue 97). * Modify line and point clipping behavior in the <<vertexpostproc-clipping, Primitive Clipping>> section to allow for pop-free behavior. The ability to check for which behavior is implemented may be added a future feature or extension (public issue 113). * Unify the discussions of implicit ordering throughout the spec, in particular in the new sections <<drawing-primitive-order, Primitive Order>>, <<primrast-order, Rasterization Order>>, and <<synchronization-implicit, Implicit Synchronization Guarantees>>; the discussion of <<synchronization-submission-order, submission order>>; and references elsewhere to these sections (public issue 133). * Clarify \<\<descriptorsets-compatibility,Pipeline Layout Compatibility>> language and introduce the term ``identically defined'' (public issue 164). * Add a dependency to the +VK_EXT_debug_marker+ extension that's needed to reuse the object type enum from +VK_EXT_debug_report+, and moves the definition of that enum into +VK_EXT_debug_report+ where it should be (public issue 409). * Remove redundant valid usage statement from slink:VkImageBlit (public issue 421). * Update GL_KHR_vulkan_glsl to allow the ternary operator to result in a specialization constant (public issue 424). * Fix valid usage for flink:VkPipelineShaderStageCreateInfo (public issue 426). * Correct typo in New Objects list for <<VK_EXT_debug_report>> (public issue 447). Internal Issues: * Moved to asciidoctor for spec builds (internal issue 121). * Update style guide to describe where to put new extensions-specific asciidoc files, and what to name them (internal issue 626). * Add src/spec/indexExt.py to autogenerate registry index entries linking into the 1.0-extensions specification, instead of maintaining the index manually. (internal issue 642). * Autogenerate extension dependencies and lists of all extensions and all KHR extensions from the "supported" attributes in +vk.xml+. Execute +make config/extDependency.sh+ from +doc/specs/vulkan+ when a supported extension is added to vk.xml, to regenerate the dependency script. The consequence is that specifying a single extension to the +makeExt+ script will automatically enable all extensions it depends on as well, and that the +makeAllExts+ and +makeKHR+ scripts do not need to be updated when a new extension is supported (internal issue 648). * Put extension appendices all at the same asciidoc section level, so KHR WSI extensions show up in the HTML index (internal issue 648). Other Issues: * Imbed images in the generated HTML specs instead of loading them from the images/ directory. * Fix missing EXT in extension name (ename:VK_EXT_SWAPCHAIN_COLOR_SPACE_EXTENSION_NAME). * Add new +VK_EXT_SMPTE_2086_metadata+ extension. * In the <<platformCreateSurface_xlib,Xlib Surface>> section of the +VK_KHR_xlib_surface+ specification, add language warning users that they always need to call code:XinitThreads. * Use the term "presentable image" (rather than "swapchain image") consistently in +VK_KHR_swapchain+ and related extensions, and add a glossary term defining it. * Relocate the valid usage for samples of flink:vkGetPhysicalDeviceSparseImageFormatProperties2KHR::pname:pFormatInfo to be below the flink:VkPhysicalDeviceSparseImageFormatInfo2KHR structure.
2017-02-11 04:37:39 +00:00
\end{aligned}
Change log for January 23, 2017 Vulkan 1.0.39 spec update: * Bump API patch number and header version number to 39 for this update. Github Issues: * Clarified that only accesses via the specified buffer/image subresource ranges are included in the access scopes (public issue 306). * Add missing valid usage statements for flink:vkCreateComputePipelines and flink:vkCreateGraphicsPipelines (public issue 427). Internal Issues: * Add a Note to the <<invariance,Invariance>> appendix about a difference between OpenGL and Vulkan with regards to how primitives derived from offsets are handled (internal issue 355). * Add the +<<VK_KHR_get_physical_device_properties2>>+, +<<VK_KHR_maintenance1>>+, and +<<VK_KHR_shader_draw_parameters>>+ extensions (internal issue 448). * Add the +<<VK_EXT_shader_subgroup_vote>>+ and +<<VK_EXT_shader_subgroup_ballot>>+ extensions (internal issue 449). * Update the texture level-of-detail equation in the <<textures-scale-factor,Scale Factor Operation>> section to better approximate the ellipse major and minor axes (internal issue 547). * Forbid non-explicitly allowed uses of interface decorations in the introduction to the <<interfaces,Shader Interfaces>> chapter (internal issue 607). * Replace use of MathJax with KaTeX, for improved load-time performance as well as avoiding the scrolling-and-scrolling behavior due to MathJax asynchronous rendering when loading at an anchor inside the spec. This change also requires moving to HTML5 output for the spec instead of XHTML, and there is a visible difference in that the chapter navigation index is now in a scrollable sidebar instead of at the top of the document. We may or may not retain the nav sidebar based on feedback (internal issue 613). * Improve consistency of markup and formatting in extension appendices (internal issue 631). Other Issues: * Add explicit valid usage statements to slink:VkImageCopy requiring that the source and destination layer ranges be contained in their respective source and destination images. * Add valid usage language for swapchain of flink:vkAcquireNextImage. If the swapchain has been replaced, then it should not be passed to flink:vkAcquireNextImage. * Add a valid usage statement to flink:vkCreateImageView, that the image must have been created with an appropriate usage bit set. * Noted that slink:VkDisplayPresentInfoKHR is a valid extension of slink:VkPresentInfoKHR in the <<wsi_swapchain,WSI Swapchain>> section. * Update valid usage for flink:vkCmdSetViewport and flink:vkCmdSetScissor to account for the multiple viewport feature. If the feature is not enabled, the parameters for these functions have required values that are defined in the <<features-features-multiViewport,multiple viewports>> section of the spec but were not reflected in the valid usage text for these functions. * Add the +<<VK_EXT_swapchain_colorspace>>+ extension defining common color spaces.
2017-01-18 04:11:25 +00:00
+++++++++++++++++++
=== latexmath block 28
[latexmath]
+++++++++++++++++++
Change log for February 10, 2017 Vulkan 1.0.40 spec update: * Bump API patch number and header version number to 40 for this update. * There is a major build change in this release. We are now using the Ruby-based ``asciidoctor'' implementation, rather than the Python-based ``asciidoc'' implementation, to process the specification. While the actual specification markup changes were minimal, this requires a new set of build tools and a very different installation process, especially because we now use an experimental direct-to-PDF backend for Asciidoctor instead of Docbook->dblatex->PDF. It is no longer possible to build the Specification using asciidoc. See doc/specs/vulkan/README.adoc for some guidance on installing the new toolchain components. * There are some minor rendering issues in the PDF output due to teething problems with the asciidoctor toolchain, especially with mathematical equations. We are aware of these and working on them. Github Issues: * Updated sample code for the <<sparsememory-examples-basic,sparse resource binding example>> (public issue 97). * Modify line and point clipping behavior in the <<vertexpostproc-clipping, Primitive Clipping>> section to allow for pop-free behavior. The ability to check for which behavior is implemented may be added a future feature or extension (public issue 113). * Unify the discussions of implicit ordering throughout the spec, in particular in the new sections <<drawing-primitive-order, Primitive Order>>, <<primrast-order, Rasterization Order>>, and <<synchronization-implicit, Implicit Synchronization Guarantees>>; the discussion of <<synchronization-submission-order, submission order>>; and references elsewhere to these sections (public issue 133). * Clarify \<\<descriptorsets-compatibility,Pipeline Layout Compatibility>> language and introduce the term ``identically defined'' (public issue 164). * Add a dependency to the +VK_EXT_debug_marker+ extension that's needed to reuse the object type enum from +VK_EXT_debug_report+, and moves the definition of that enum into +VK_EXT_debug_report+ where it should be (public issue 409). * Remove redundant valid usage statement from slink:VkImageBlit (public issue 421). * Update GL_KHR_vulkan_glsl to allow the ternary operator to result in a specialization constant (public issue 424). * Fix valid usage for flink:VkPipelineShaderStageCreateInfo (public issue 426). * Correct typo in New Objects list for <<VK_EXT_debug_report>> (public issue 447). Internal Issues: * Moved to asciidoctor for spec builds (internal issue 121). * Update style guide to describe where to put new extensions-specific asciidoc files, and what to name them (internal issue 626). * Add src/spec/indexExt.py to autogenerate registry index entries linking into the 1.0-extensions specification, instead of maintaining the index manually. (internal issue 642). * Autogenerate extension dependencies and lists of all extensions and all KHR extensions from the "supported" attributes in +vk.xml+. Execute +make config/extDependency.sh+ from +doc/specs/vulkan+ when a supported extension is added to vk.xml, to regenerate the dependency script. The consequence is that specifying a single extension to the +makeExt+ script will automatically enable all extensions it depends on as well, and that the +makeAllExts+ and +makeKHR+ scripts do not need to be updated when a new extension is supported (internal issue 648). * Put extension appendices all at the same asciidoc section level, so KHR WSI extensions show up in the HTML index (internal issue 648). Other Issues: * Imbed images in the generated HTML specs instead of loading them from the images/ directory. * Fix missing EXT in extension name (ename:VK_EXT_SWAPCHAIN_COLOR_SPACE_EXTENSION_NAME). * Add new +VK_EXT_SMPTE_2086_metadata+ extension. * In the <<platformCreateSurface_xlib,Xlib Surface>> section of the +VK_KHR_xlib_surface+ specification, add language warning users that they always need to call code:XinitThreads. * Use the term "presentable image" (rather than "swapchain image") consistently in +VK_KHR_swapchain+ and related extensions, and add a glossary term defining it. * Relocate the valid usage for samples of flink:vkGetPhysicalDeviceSparseImageFormatProperties2KHR::pname:pFormatInfo to be below the flink:VkPhysicalDeviceSparseImageFormatInfo2KHR structure.
2017-02-11 04:37:39 +00:00
\begin{aligned}
Change log for January 23, 2017 Vulkan 1.0.39 spec update: * Bump API patch number and header version number to 39 for this update. Github Issues: * Clarified that only accesses via the specified buffer/image subresource ranges are included in the access scopes (public issue 306). * Add missing valid usage statements for flink:vkCreateComputePipelines and flink:vkCreateGraphicsPipelines (public issue 427). Internal Issues: * Add a Note to the <<invariance,Invariance>> appendix about a difference between OpenGL and Vulkan with regards to how primitives derived from offsets are handled (internal issue 355). * Add the +<<VK_KHR_get_physical_device_properties2>>+, +<<VK_KHR_maintenance1>>+, and +<<VK_KHR_shader_draw_parameters>>+ extensions (internal issue 448). * Add the +<<VK_EXT_shader_subgroup_vote>>+ and +<<VK_EXT_shader_subgroup_ballot>>+ extensions (internal issue 449). * Update the texture level-of-detail equation in the <<textures-scale-factor,Scale Factor Operation>> section to better approximate the ellipse major and minor axes (internal issue 547). * Forbid non-explicitly allowed uses of interface decorations in the introduction to the <<interfaces,Shader Interfaces>> chapter (internal issue 607). * Replace use of MathJax with KaTeX, for improved load-time performance as well as avoiding the scrolling-and-scrolling behavior due to MathJax asynchronous rendering when loading at an anchor inside the spec. This change also requires moving to HTML5 output for the spec instead of XHTML, and there is a visible difference in that the chapter navigation index is now in a scrollable sidebar instead of at the top of the document. We may or may not retain the nav sidebar based on feedback (internal issue 613). * Improve consistency of markup and formatting in extension appendices (internal issue 631). Other Issues: * Add explicit valid usage statements to slink:VkImageCopy requiring that the source and destination layer ranges be contained in their respective source and destination images. * Add valid usage language for swapchain of flink:vkAcquireNextImage. If the swapchain has been replaced, then it should not be passed to flink:vkAcquireNextImage. * Add a valid usage statement to flink:vkCreateImageView, that the image must have been created with an appropriate usage bit set. * Noted that slink:VkDisplayPresentInfoKHR is a valid extension of slink:VkPresentInfoKHR in the <<wsi_swapchain,WSI Swapchain>> section. * Update valid usage for flink:vkCmdSetViewport and flink:vkCmdSetScissor to account for the multiple viewport feature. If the feature is not enabled, the parameters for these functions have required values that are defined in the <<features-features-multiViewport,multiple viewports>> section of the spec but were not reflected in the valid usage text for these functions. * Add the +<<VK_EXT_swapchain_colorspace>>+ extension defining common color spaces.
2017-01-18 04:11:25 +00:00
C_{rgba}[R] & \text{is the RED component} \\
C_{rgba}[G] & \text{is the GREEN component} \\
C_{rgba}[B] & \text{is the BLUE component} \\
C_{rgba}[A] & \text{is the ALPHA component} \\
one & = 1.0\text{f} & \text{for floating point components} \\
one & = 1 & \text{for integer components}
Change log for February 10, 2017 Vulkan 1.0.40 spec update: * Bump API patch number and header version number to 40 for this update. * There is a major build change in this release. We are now using the Ruby-based ``asciidoctor'' implementation, rather than the Python-based ``asciidoc'' implementation, to process the specification. While the actual specification markup changes were minimal, this requires a new set of build tools and a very different installation process, especially because we now use an experimental direct-to-PDF backend for Asciidoctor instead of Docbook->dblatex->PDF. It is no longer possible to build the Specification using asciidoc. See doc/specs/vulkan/README.adoc for some guidance on installing the new toolchain components. * There are some minor rendering issues in the PDF output due to teething problems with the asciidoctor toolchain, especially with mathematical equations. We are aware of these and working on them. Github Issues: * Updated sample code for the <<sparsememory-examples-basic,sparse resource binding example>> (public issue 97). * Modify line and point clipping behavior in the <<vertexpostproc-clipping, Primitive Clipping>> section to allow for pop-free behavior. The ability to check for which behavior is implemented may be added a future feature or extension (public issue 113). * Unify the discussions of implicit ordering throughout the spec, in particular in the new sections <<drawing-primitive-order, Primitive Order>>, <<primrast-order, Rasterization Order>>, and <<synchronization-implicit, Implicit Synchronization Guarantees>>; the discussion of <<synchronization-submission-order, submission order>>; and references elsewhere to these sections (public issue 133). * Clarify \<\<descriptorsets-compatibility,Pipeline Layout Compatibility>> language and introduce the term ``identically defined'' (public issue 164). * Add a dependency to the +VK_EXT_debug_marker+ extension that's needed to reuse the object type enum from +VK_EXT_debug_report+, and moves the definition of that enum into +VK_EXT_debug_report+ where it should be (public issue 409). * Remove redundant valid usage statement from slink:VkImageBlit (public issue 421). * Update GL_KHR_vulkan_glsl to allow the ternary operator to result in a specialization constant (public issue 424). * Fix valid usage for flink:VkPipelineShaderStageCreateInfo (public issue 426). * Correct typo in New Objects list for <<VK_EXT_debug_report>> (public issue 447). Internal Issues: * Moved to asciidoctor for spec builds (internal issue 121). * Update style guide to describe where to put new extensions-specific asciidoc files, and what to name them (internal issue 626). * Add src/spec/indexExt.py to autogenerate registry index entries linking into the 1.0-extensions specification, instead of maintaining the index manually. (internal issue 642). * Autogenerate extension dependencies and lists of all extensions and all KHR extensions from the "supported" attributes in +vk.xml+. Execute +make config/extDependency.sh+ from +doc/specs/vulkan+ when a supported extension is added to vk.xml, to regenerate the dependency script. The consequence is that specifying a single extension to the +makeExt+ script will automatically enable all extensions it depends on as well, and that the +makeAllExts+ and +makeKHR+ scripts do not need to be updated when a new extension is supported (internal issue 648). * Put extension appendices all at the same asciidoc section level, so KHR WSI extensions show up in the HTML index (internal issue 648). Other Issues: * Imbed images in the generated HTML specs instead of loading them from the images/ directory. * Fix missing EXT in extension name (ename:VK_EXT_SWAPCHAIN_COLOR_SPACE_EXTENSION_NAME). * Add new +VK_EXT_SMPTE_2086_metadata+ extension. * In the <<platformCreateSurface_xlib,Xlib Surface>> section of the +VK_KHR_xlib_surface+ specification, add language warning users that they always need to call code:XinitThreads. * Use the term "presentable image" (rather than "swapchain image") consistently in +VK_KHR_swapchain+ and related extensions, and add a glossary term defining it. * Relocate the valid usage for samples of flink:vkGetPhysicalDeviceSparseImageFormatProperties2KHR::pname:pFormatInfo to be below the flink:VkPhysicalDeviceSparseImageFormatInfo2KHR structure.
2017-02-11 04:37:39 +00:00
\end{aligned}
Change log for January 23, 2017 Vulkan 1.0.39 spec update: * Bump API patch number and header version number to 39 for this update. Github Issues: * Clarified that only accesses via the specified buffer/image subresource ranges are included in the access scopes (public issue 306). * Add missing valid usage statements for flink:vkCreateComputePipelines and flink:vkCreateGraphicsPipelines (public issue 427). Internal Issues: * Add a Note to the <<invariance,Invariance>> appendix about a difference between OpenGL and Vulkan with regards to how primitives derived from offsets are handled (internal issue 355). * Add the +<<VK_KHR_get_physical_device_properties2>>+, +<<VK_KHR_maintenance1>>+, and +<<VK_KHR_shader_draw_parameters>>+ extensions (internal issue 448). * Add the +<<VK_EXT_shader_subgroup_vote>>+ and +<<VK_EXT_shader_subgroup_ballot>>+ extensions (internal issue 449). * Update the texture level-of-detail equation in the <<textures-scale-factor,Scale Factor Operation>> section to better approximate the ellipse major and minor axes (internal issue 547). * Forbid non-explicitly allowed uses of interface decorations in the introduction to the <<interfaces,Shader Interfaces>> chapter (internal issue 607). * Replace use of MathJax with KaTeX, for improved load-time performance as well as avoiding the scrolling-and-scrolling behavior due to MathJax asynchronous rendering when loading at an anchor inside the spec. This change also requires moving to HTML5 output for the spec instead of XHTML, and there is a visible difference in that the chapter navigation index is now in a scrollable sidebar instead of at the top of the document. We may or may not retain the nav sidebar based on feedback (internal issue 613). * Improve consistency of markup and formatting in extension appendices (internal issue 631). Other Issues: * Add explicit valid usage statements to slink:VkImageCopy requiring that the source and destination layer ranges be contained in their respective source and destination images. * Add valid usage language for swapchain of flink:vkAcquireNextImage. If the swapchain has been replaced, then it should not be passed to flink:vkAcquireNextImage. * Add a valid usage statement to flink:vkCreateImageView, that the image must have been created with an appropriate usage bit set. * Noted that slink:VkDisplayPresentInfoKHR is a valid extension of slink:VkPresentInfoKHR in the <<wsi_swapchain,WSI Swapchain>> section. * Update valid usage for flink:vkCmdSetViewport and flink:vkCmdSetScissor to account for the multiple viewport feature. If the feature is not enabled, the parameters for these functions have required values that are defined in the <<features-features-multiViewport,multiple viewports>> section of the spec but were not reflected in the valid usage text for these functions. * Add the +<<VK_EXT_swapchain_colorspace>>+ extension defining common color spaces.
2017-01-18 04:11:25 +00:00
+++++++++++++++++++
=== latexmath block 29
[latexmath]
+++++++++++++++++++
Change log for February 10, 2017 Vulkan 1.0.40 spec update: * Bump API patch number and header version number to 40 for this update. * There is a major build change in this release. We are now using the Ruby-based ``asciidoctor'' implementation, rather than the Python-based ``asciidoc'' implementation, to process the specification. While the actual specification markup changes were minimal, this requires a new set of build tools and a very different installation process, especially because we now use an experimental direct-to-PDF backend for Asciidoctor instead of Docbook->dblatex->PDF. It is no longer possible to build the Specification using asciidoc. See doc/specs/vulkan/README.adoc for some guidance on installing the new toolchain components. * There are some minor rendering issues in the PDF output due to teething problems with the asciidoctor toolchain, especially with mathematical equations. We are aware of these and working on them. Github Issues: * Updated sample code for the <<sparsememory-examples-basic,sparse resource binding example>> (public issue 97). * Modify line and point clipping behavior in the <<vertexpostproc-clipping, Primitive Clipping>> section to allow for pop-free behavior. The ability to check for which behavior is implemented may be added a future feature or extension (public issue 113). * Unify the discussions of implicit ordering throughout the spec, in particular in the new sections <<drawing-primitive-order, Primitive Order>>, <<primrast-order, Rasterization Order>>, and <<synchronization-implicit, Implicit Synchronization Guarantees>>; the discussion of <<synchronization-submission-order, submission order>>; and references elsewhere to these sections (public issue 133). * Clarify \<\<descriptorsets-compatibility,Pipeline Layout Compatibility>> language and introduce the term ``identically defined'' (public issue 164). * Add a dependency to the +VK_EXT_debug_marker+ extension that's needed to reuse the object type enum from +VK_EXT_debug_report+, and moves the definition of that enum into +VK_EXT_debug_report+ where it should be (public issue 409). * Remove redundant valid usage statement from slink:VkImageBlit (public issue 421). * Update GL_KHR_vulkan_glsl to allow the ternary operator to result in a specialization constant (public issue 424). * Fix valid usage for flink:VkPipelineShaderStageCreateInfo (public issue 426). * Correct typo in New Objects list for <<VK_EXT_debug_report>> (public issue 447). Internal Issues: * Moved to asciidoctor for spec builds (internal issue 121). * Update style guide to describe where to put new extensions-specific asciidoc files, and what to name them (internal issue 626). * Add src/spec/indexExt.py to autogenerate registry index entries linking into the 1.0-extensions specification, instead of maintaining the index manually. (internal issue 642). * Autogenerate extension dependencies and lists of all extensions and all KHR extensions from the "supported" attributes in +vk.xml+. Execute +make config/extDependency.sh+ from +doc/specs/vulkan+ when a supported extension is added to vk.xml, to regenerate the dependency script. The consequence is that specifying a single extension to the +makeExt+ script will automatically enable all extensions it depends on as well, and that the +makeAllExts+ and +makeKHR+ scripts do not need to be updated when a new extension is supported (internal issue 648). * Put extension appendices all at the same asciidoc section level, so KHR WSI extensions show up in the HTML index (internal issue 648). Other Issues: * Imbed images in the generated HTML specs instead of loading them from the images/ directory. * Fix missing EXT in extension name (ename:VK_EXT_SWAPCHAIN_COLOR_SPACE_EXTENSION_NAME). * Add new +VK_EXT_SMPTE_2086_metadata+ extension. * In the <<platformCreateSurface_xlib,Xlib Surface>> section of the +VK_KHR_xlib_surface+ specification, add language warning users that they always need to call code:XinitThreads. * Use the term "presentable image" (rather than "swapchain image") consistently in +VK_KHR_swapchain+ and related extensions, and add a glossary term defining it. * Relocate the valid usage for samples of flink:vkGetPhysicalDeviceSparseImageFormatProperties2KHR::pname:pFormatInfo to be below the flink:VkPhysicalDeviceSparseImageFormatInfo2KHR structure.
2017-02-11 04:37:39 +00:00
\begin{aligned}
Change log for January 23, 2017 Vulkan 1.0.39 spec update: * Bump API patch number and header version number to 39 for this update. Github Issues: * Clarified that only accesses via the specified buffer/image subresource ranges are included in the access scopes (public issue 306). * Add missing valid usage statements for flink:vkCreateComputePipelines and flink:vkCreateGraphicsPipelines (public issue 427). Internal Issues: * Add a Note to the <<invariance,Invariance>> appendix about a difference between OpenGL and Vulkan with regards to how primitives derived from offsets are handled (internal issue 355). * Add the +<<VK_KHR_get_physical_device_properties2>>+, +<<VK_KHR_maintenance1>>+, and +<<VK_KHR_shader_draw_parameters>>+ extensions (internal issue 448). * Add the +<<VK_EXT_shader_subgroup_vote>>+ and +<<VK_EXT_shader_subgroup_ballot>>+ extensions (internal issue 449). * Update the texture level-of-detail equation in the <<textures-scale-factor,Scale Factor Operation>> section to better approximate the ellipse major and minor axes (internal issue 547). * Forbid non-explicitly allowed uses of interface decorations in the introduction to the <<interfaces,Shader Interfaces>> chapter (internal issue 607). * Replace use of MathJax with KaTeX, for improved load-time performance as well as avoiding the scrolling-and-scrolling behavior due to MathJax asynchronous rendering when loading at an anchor inside the spec. This change also requires moving to HTML5 output for the spec instead of XHTML, and there is a visible difference in that the chapter navigation index is now in a scrollable sidebar instead of at the top of the document. We may or may not retain the nav sidebar based on feedback (internal issue 613). * Improve consistency of markup and formatting in extension appendices (internal issue 631). Other Issues: * Add explicit valid usage statements to slink:VkImageCopy requiring that the source and destination layer ranges be contained in their respective source and destination images. * Add valid usage language for swapchain of flink:vkAcquireNextImage. If the swapchain has been replaced, then it should not be passed to flink:vkAcquireNextImage. * Add a valid usage statement to flink:vkCreateImageView, that the image must have been created with an appropriate usage bit set. * Noted that slink:VkDisplayPresentInfoKHR is a valid extension of slink:VkPresentInfoKHR in the <<wsi_swapchain,WSI Swapchain>> section. * Update valid usage for flink:vkCmdSetViewport and flink:vkCmdSetScissor to account for the multiple viewport feature. If the feature is not enabled, the parameters for these functions have required values that are defined in the <<features-features-multiViewport,multiple viewports>> section of the spec but were not reflected in the valid usage text for these functions. * Add the +<<VK_EXT_swapchain_colorspace>>+ extension defining common color spaces.
2017-01-18 04:11:25 +00:00
dPdx_{i_1,j_0} & = dPdx_{i_0,j_0} & = P_{i_1,j_0} - P_{i_0,j_0} \\
dPdx_{i_1,j_1} & = dPdx_{i_0,j_1} & = P_{i_1,j_1} - P_{i_0,j_1} \\
\\
dPdy_{i_0,j_1} & = dPdy_{i_0,j_0} & = P_{i_0,j_1} - P_{i_0,j_0} \\
dPdy_{i_1,j_1} & = dPdy_{i_1,j_0} & = P_{i_1,j_1} - P_{i_1,j_0}
Change log for February 10, 2017 Vulkan 1.0.40 spec update: * Bump API patch number and header version number to 40 for this update. * There is a major build change in this release. We are now using the Ruby-based ``asciidoctor'' implementation, rather than the Python-based ``asciidoc'' implementation, to process the specification. While the actual specification markup changes were minimal, this requires a new set of build tools and a very different installation process, especially because we now use an experimental direct-to-PDF backend for Asciidoctor instead of Docbook->dblatex->PDF. It is no longer possible to build the Specification using asciidoc. See doc/specs/vulkan/README.adoc for some guidance on installing the new toolchain components. * There are some minor rendering issues in the PDF output due to teething problems with the asciidoctor toolchain, especially with mathematical equations. We are aware of these and working on them. Github Issues: * Updated sample code for the <<sparsememory-examples-basic,sparse resource binding example>> (public issue 97). * Modify line and point clipping behavior in the <<vertexpostproc-clipping, Primitive Clipping>> section to allow for pop-free behavior. The ability to check for which behavior is implemented may be added a future feature or extension (public issue 113). * Unify the discussions of implicit ordering throughout the spec, in particular in the new sections <<drawing-primitive-order, Primitive Order>>, <<primrast-order, Rasterization Order>>, and <<synchronization-implicit, Implicit Synchronization Guarantees>>; the discussion of <<synchronization-submission-order, submission order>>; and references elsewhere to these sections (public issue 133). * Clarify \<\<descriptorsets-compatibility,Pipeline Layout Compatibility>> language and introduce the term ``identically defined'' (public issue 164). * Add a dependency to the +VK_EXT_debug_marker+ extension that's needed to reuse the object type enum from +VK_EXT_debug_report+, and moves the definition of that enum into +VK_EXT_debug_report+ where it should be (public issue 409). * Remove redundant valid usage statement from slink:VkImageBlit (public issue 421). * Update GL_KHR_vulkan_glsl to allow the ternary operator to result in a specialization constant (public issue 424). * Fix valid usage for flink:VkPipelineShaderStageCreateInfo (public issue 426). * Correct typo in New Objects list for <<VK_EXT_debug_report>> (public issue 447). Internal Issues: * Moved to asciidoctor for spec builds (internal issue 121). * Update style guide to describe where to put new extensions-specific asciidoc files, and what to name them (internal issue 626). * Add src/spec/indexExt.py to autogenerate registry index entries linking into the 1.0-extensions specification, instead of maintaining the index manually. (internal issue 642). * Autogenerate extension dependencies and lists of all extensions and all KHR extensions from the "supported" attributes in +vk.xml+. Execute +make config/extDependency.sh+ from +doc/specs/vulkan+ when a supported extension is added to vk.xml, to regenerate the dependency script. The consequence is that specifying a single extension to the +makeExt+ script will automatically enable all extensions it depends on as well, and that the +makeAllExts+ and +makeKHR+ scripts do not need to be updated when a new extension is supported (internal issue 648). * Put extension appendices all at the same asciidoc section level, so KHR WSI extensions show up in the HTML index (internal issue 648). Other Issues: * Imbed images in the generated HTML specs instead of loading them from the images/ directory. * Fix missing EXT in extension name (ename:VK_EXT_SWAPCHAIN_COLOR_SPACE_EXTENSION_NAME). * Add new +VK_EXT_SMPTE_2086_metadata+ extension. * In the <<platformCreateSurface_xlib,Xlib Surface>> section of the +VK_KHR_xlib_surface+ specification, add language warning users that they always need to call code:XinitThreads. * Use the term "presentable image" (rather than "swapchain image") consistently in +VK_KHR_swapchain+ and related extensions, and add a glossary term defining it. * Relocate the valid usage for samples of flink:vkGetPhysicalDeviceSparseImageFormatProperties2KHR::pname:pFormatInfo to be below the flink:VkPhysicalDeviceSparseImageFormatInfo2KHR structure.
2017-02-11 04:37:39 +00:00
\end{aligned}
Change log for January 23, 2017 Vulkan 1.0.39 spec update: * Bump API patch number and header version number to 39 for this update. Github Issues: * Clarified that only accesses via the specified buffer/image subresource ranges are included in the access scopes (public issue 306). * Add missing valid usage statements for flink:vkCreateComputePipelines and flink:vkCreateGraphicsPipelines (public issue 427). Internal Issues: * Add a Note to the <<invariance,Invariance>> appendix about a difference between OpenGL and Vulkan with regards to how primitives derived from offsets are handled (internal issue 355). * Add the +<<VK_KHR_get_physical_device_properties2>>+, +<<VK_KHR_maintenance1>>+, and +<<VK_KHR_shader_draw_parameters>>+ extensions (internal issue 448). * Add the +<<VK_EXT_shader_subgroup_vote>>+ and +<<VK_EXT_shader_subgroup_ballot>>+ extensions (internal issue 449). * Update the texture level-of-detail equation in the <<textures-scale-factor,Scale Factor Operation>> section to better approximate the ellipse major and minor axes (internal issue 547). * Forbid non-explicitly allowed uses of interface decorations in the introduction to the <<interfaces,Shader Interfaces>> chapter (internal issue 607). * Replace use of MathJax with KaTeX, for improved load-time performance as well as avoiding the scrolling-and-scrolling behavior due to MathJax asynchronous rendering when loading at an anchor inside the spec. This change also requires moving to HTML5 output for the spec instead of XHTML, and there is a visible difference in that the chapter navigation index is now in a scrollable sidebar instead of at the top of the document. We may or may not retain the nav sidebar based on feedback (internal issue 613). * Improve consistency of markup and formatting in extension appendices (internal issue 631). Other Issues: * Add explicit valid usage statements to slink:VkImageCopy requiring that the source and destination layer ranges be contained in their respective source and destination images. * Add valid usage language for swapchain of flink:vkAcquireNextImage. If the swapchain has been replaced, then it should not be passed to flink:vkAcquireNextImage. * Add a valid usage statement to flink:vkCreateImageView, that the image must have been created with an appropriate usage bit set. * Noted that slink:VkDisplayPresentInfoKHR is a valid extension of slink:VkPresentInfoKHR in the <<wsi_swapchain,WSI Swapchain>> section. * Update valid usage for flink:vkCmdSetViewport and flink:vkCmdSetScissor to account for the multiple viewport feature. If the feature is not enabled, the parameters for these functions have required values that are defined in the <<features-features-multiViewport,multiple viewports>> section of the spec but were not reflected in the valid usage text for these functions. * Add the +<<VK_EXT_swapchain_colorspace>>+ extension defining common color spaces.
2017-01-18 04:11:25 +00:00
+++++++++++++++++++
=== latexmath block 30
[latexmath]
+++++++++++++++++++
Change log for February 10, 2017 Vulkan 1.0.40 spec update: * Bump API patch number and header version number to 40 for this update. * There is a major build change in this release. We are now using the Ruby-based ``asciidoctor'' implementation, rather than the Python-based ``asciidoc'' implementation, to process the specification. While the actual specification markup changes were minimal, this requires a new set of build tools and a very different installation process, especially because we now use an experimental direct-to-PDF backend for Asciidoctor instead of Docbook->dblatex->PDF. It is no longer possible to build the Specification using asciidoc. See doc/specs/vulkan/README.adoc for some guidance on installing the new toolchain components. * There are some minor rendering issues in the PDF output due to teething problems with the asciidoctor toolchain, especially with mathematical equations. We are aware of these and working on them. Github Issues: * Updated sample code for the <<sparsememory-examples-basic,sparse resource binding example>> (public issue 97). * Modify line and point clipping behavior in the <<vertexpostproc-clipping, Primitive Clipping>> section to allow for pop-free behavior. The ability to check for which behavior is implemented may be added a future feature or extension (public issue 113). * Unify the discussions of implicit ordering throughout the spec, in particular in the new sections <<drawing-primitive-order, Primitive Order>>, <<primrast-order, Rasterization Order>>, and <<synchronization-implicit, Implicit Synchronization Guarantees>>; the discussion of <<synchronization-submission-order, submission order>>; and references elsewhere to these sections (public issue 133). * Clarify \<\<descriptorsets-compatibility,Pipeline Layout Compatibility>> language and introduce the term ``identically defined'' (public issue 164). * Add a dependency to the +VK_EXT_debug_marker+ extension that's needed to reuse the object type enum from +VK_EXT_debug_report+, and moves the definition of that enum into +VK_EXT_debug_report+ where it should be (public issue 409). * Remove redundant valid usage statement from slink:VkImageBlit (public issue 421). * Update GL_KHR_vulkan_glsl to allow the ternary operator to result in a specialization constant (public issue 424). * Fix valid usage for flink:VkPipelineShaderStageCreateInfo (public issue 426). * Correct typo in New Objects list for <<VK_EXT_debug_report>> (public issue 447). Internal Issues: * Moved to asciidoctor for spec builds (internal issue 121). * Update style guide to describe where to put new extensions-specific asciidoc files, and what to name them (internal issue 626). * Add src/spec/indexExt.py to autogenerate registry index entries linking into the 1.0-extensions specification, instead of maintaining the index manually. (internal issue 642). * Autogenerate extension dependencies and lists of all extensions and all KHR extensions from the "supported" attributes in +vk.xml+. Execute +make config/extDependency.sh+ from +doc/specs/vulkan+ when a supported extension is added to vk.xml, to regenerate the dependency script. The consequence is that specifying a single extension to the +makeExt+ script will automatically enable all extensions it depends on as well, and that the +makeAllExts+ and +makeKHR+ scripts do not need to be updated when a new extension is supported (internal issue 648). * Put extension appendices all at the same asciidoc section level, so KHR WSI extensions show up in the HTML index (internal issue 648). Other Issues: * Imbed images in the generated HTML specs instead of loading them from the images/ directory. * Fix missing EXT in extension name (ename:VK_EXT_SWAPCHAIN_COLOR_SPACE_EXTENSION_NAME). * Add new +VK_EXT_SMPTE_2086_metadata+ extension. * In the <<platformCreateSurface_xlib,Xlib Surface>> section of the +VK_KHR_xlib_surface+ specification, add language warning users that they always need to call code:XinitThreads. * Use the term "presentable image" (rather than "swapchain image") consistently in +VK_KHR_swapchain+ and related extensions, and add a glossary term defining it. * Relocate the valid usage for samples of flink:vkGetPhysicalDeviceSparseImageFormatProperties2KHR::pname:pFormatInfo to be below the flink:VkPhysicalDeviceSparseImageFormatInfo2KHR structure.
2017-02-11 04:37:39 +00:00
\begin{aligned}
Change log for January 23, 2017 Vulkan 1.0.39 spec update: * Bump API patch number and header version number to 39 for this update. Github Issues: * Clarified that only accesses via the specified buffer/image subresource ranges are included in the access scopes (public issue 306). * Add missing valid usage statements for flink:vkCreateComputePipelines and flink:vkCreateGraphicsPipelines (public issue 427). Internal Issues: * Add a Note to the <<invariance,Invariance>> appendix about a difference between OpenGL and Vulkan with regards to how primitives derived from offsets are handled (internal issue 355). * Add the +<<VK_KHR_get_physical_device_properties2>>+, +<<VK_KHR_maintenance1>>+, and +<<VK_KHR_shader_draw_parameters>>+ extensions (internal issue 448). * Add the +<<VK_EXT_shader_subgroup_vote>>+ and +<<VK_EXT_shader_subgroup_ballot>>+ extensions (internal issue 449). * Update the texture level-of-detail equation in the <<textures-scale-factor,Scale Factor Operation>> section to better approximate the ellipse major and minor axes (internal issue 547). * Forbid non-explicitly allowed uses of interface decorations in the introduction to the <<interfaces,Shader Interfaces>> chapter (internal issue 607). * Replace use of MathJax with KaTeX, for improved load-time performance as well as avoiding the scrolling-and-scrolling behavior due to MathJax asynchronous rendering when loading at an anchor inside the spec. This change also requires moving to HTML5 output for the spec instead of XHTML, and there is a visible difference in that the chapter navigation index is now in a scrollable sidebar instead of at the top of the document. We may or may not retain the nav sidebar based on feedback (internal issue 613). * Improve consistency of markup and formatting in extension appendices (internal issue 631). Other Issues: * Add explicit valid usage statements to slink:VkImageCopy requiring that the source and destination layer ranges be contained in their respective source and destination images. * Add valid usage language for swapchain of flink:vkAcquireNextImage. If the swapchain has been replaced, then it should not be passed to flink:vkAcquireNextImage. * Add a valid usage statement to flink:vkCreateImageView, that the image must have been created with an appropriate usage bit set. * Noted that slink:VkDisplayPresentInfoKHR is a valid extension of slink:VkPresentInfoKHR in the <<wsi_swapchain,WSI Swapchain>> section. * Update valid usage for flink:vkCmdSetViewport and flink:vkCmdSetScissor to account for the multiple viewport feature. If the feature is not enabled, the parameters for these functions have required values that are defined in the <<features-features-multiViewport,multiple viewports>> section of the spec but were not reflected in the valid usage text for these functions. * Add the +<<VK_EXT_swapchain_colorspace>>+ extension defining common color spaces.
2017-01-18 04:11:25 +00:00
dPdx & =
\begin{cases}
dPdx_{i_0,j_0} & \text{preferred}\\
dPdx_{i_0,j_1}
\end{cases} \\
dPdy & =
\begin{cases}
dPdy_{i_0,j_0} & \text{preferred}\\
dPdy_{i_1,j_0}
\end{cases}
Change log for February 10, 2017 Vulkan 1.0.40 spec update: * Bump API patch number and header version number to 40 for this update. * There is a major build change in this release. We are now using the Ruby-based ``asciidoctor'' implementation, rather than the Python-based ``asciidoc'' implementation, to process the specification. While the actual specification markup changes were minimal, this requires a new set of build tools and a very different installation process, especially because we now use an experimental direct-to-PDF backend for Asciidoctor instead of Docbook->dblatex->PDF. It is no longer possible to build the Specification using asciidoc. See doc/specs/vulkan/README.adoc for some guidance on installing the new toolchain components. * There are some minor rendering issues in the PDF output due to teething problems with the asciidoctor toolchain, especially with mathematical equations. We are aware of these and working on them. Github Issues: * Updated sample code for the <<sparsememory-examples-basic,sparse resource binding example>> (public issue 97). * Modify line and point clipping behavior in the <<vertexpostproc-clipping, Primitive Clipping>> section to allow for pop-free behavior. The ability to check for which behavior is implemented may be added a future feature or extension (public issue 113). * Unify the discussions of implicit ordering throughout the spec, in particular in the new sections <<drawing-primitive-order, Primitive Order>>, <<primrast-order, Rasterization Order>>, and <<synchronization-implicit, Implicit Synchronization Guarantees>>; the discussion of <<synchronization-submission-order, submission order>>; and references elsewhere to these sections (public issue 133). * Clarify \<\<descriptorsets-compatibility,Pipeline Layout Compatibility>> language and introduce the term ``identically defined'' (public issue 164). * Add a dependency to the +VK_EXT_debug_marker+ extension that's needed to reuse the object type enum from +VK_EXT_debug_report+, and moves the definition of that enum into +VK_EXT_debug_report+ where it should be (public issue 409). * Remove redundant valid usage statement from slink:VkImageBlit (public issue 421). * Update GL_KHR_vulkan_glsl to allow the ternary operator to result in a specialization constant (public issue 424). * Fix valid usage for flink:VkPipelineShaderStageCreateInfo (public issue 426). * Correct typo in New Objects list for <<VK_EXT_debug_report>> (public issue 447). Internal Issues: * Moved to asciidoctor for spec builds (internal issue 121). * Update style guide to describe where to put new extensions-specific asciidoc files, and what to name them (internal issue 626). * Add src/spec/indexExt.py to autogenerate registry index entries linking into the 1.0-extensions specification, instead of maintaining the index manually. (internal issue 642). * Autogenerate extension dependencies and lists of all extensions and all KHR extensions from the "supported" attributes in +vk.xml+. Execute +make config/extDependency.sh+ from +doc/specs/vulkan+ when a supported extension is added to vk.xml, to regenerate the dependency script. The consequence is that specifying a single extension to the +makeExt+ script will automatically enable all extensions it depends on as well, and that the +makeAllExts+ and +makeKHR+ scripts do not need to be updated when a new extension is supported (internal issue 648). * Put extension appendices all at the same asciidoc section level, so KHR WSI extensions show up in the HTML index (internal issue 648). Other Issues: * Imbed images in the generated HTML specs instead of loading them from the images/ directory. * Fix missing EXT in extension name (ename:VK_EXT_SWAPCHAIN_COLOR_SPACE_EXTENSION_NAME). * Add new +VK_EXT_SMPTE_2086_metadata+ extension. * In the <<platformCreateSurface_xlib,Xlib Surface>> section of the +VK_KHR_xlib_surface+ specification, add language warning users that they always need to call code:XinitThreads. * Use the term "presentable image" (rather than "swapchain image") consistently in +VK_KHR_swapchain+ and related extensions, and add a glossary term defining it. * Relocate the valid usage for samples of flink:vkGetPhysicalDeviceSparseImageFormatProperties2KHR::pname:pFormatInfo to be below the flink:VkPhysicalDeviceSparseImageFormatInfo2KHR structure.
2017-02-11 04:37:39 +00:00
\end{aligned}
Change log for January 23, 2017 Vulkan 1.0.39 spec update: * Bump API patch number and header version number to 39 for this update. Github Issues: * Clarified that only accesses via the specified buffer/image subresource ranges are included in the access scopes (public issue 306). * Add missing valid usage statements for flink:vkCreateComputePipelines and flink:vkCreateGraphicsPipelines (public issue 427). Internal Issues: * Add a Note to the <<invariance,Invariance>> appendix about a difference between OpenGL and Vulkan with regards to how primitives derived from offsets are handled (internal issue 355). * Add the +<<VK_KHR_get_physical_device_properties2>>+, +<<VK_KHR_maintenance1>>+, and +<<VK_KHR_shader_draw_parameters>>+ extensions (internal issue 448). * Add the +<<VK_EXT_shader_subgroup_vote>>+ and +<<VK_EXT_shader_subgroup_ballot>>+ extensions (internal issue 449). * Update the texture level-of-detail equation in the <<textures-scale-factor,Scale Factor Operation>> section to better approximate the ellipse major and minor axes (internal issue 547). * Forbid non-explicitly allowed uses of interface decorations in the introduction to the <<interfaces,Shader Interfaces>> chapter (internal issue 607). * Replace use of MathJax with KaTeX, for improved load-time performance as well as avoiding the scrolling-and-scrolling behavior due to MathJax asynchronous rendering when loading at an anchor inside the spec. This change also requires moving to HTML5 output for the spec instead of XHTML, and there is a visible difference in that the chapter navigation index is now in a scrollable sidebar instead of at the top of the document. We may or may not retain the nav sidebar based on feedback (internal issue 613). * Improve consistency of markup and formatting in extension appendices (internal issue 631). Other Issues: * Add explicit valid usage statements to slink:VkImageCopy requiring that the source and destination layer ranges be contained in their respective source and destination images. * Add valid usage language for swapchain of flink:vkAcquireNextImage. If the swapchain has been replaced, then it should not be passed to flink:vkAcquireNextImage. * Add a valid usage statement to flink:vkCreateImageView, that the image must have been created with an appropriate usage bit set. * Noted that slink:VkDisplayPresentInfoKHR is a valid extension of slink:VkPresentInfoKHR in the <<wsi_swapchain,WSI Swapchain>> section. * Update valid usage for flink:vkCmdSetViewport and flink:vkCmdSetScissor to account for the multiple viewport feature. If the feature is not enabled, the parameters for these functions have required values that are defined in the <<features-features-multiViewport,multiple viewports>> section of the spec but were not reflected in the valid usage text for these functions. * Add the +<<VK_EXT_swapchain_colorspace>>+ extension defining common color spaces.
2017-01-18 04:11:25 +00:00
+++++++++++++++++++
=== latexmath block 31
[latexmath]
+++++++++++++++++++
Change log for February 10, 2017 Vulkan 1.0.40 spec update: * Bump API patch number and header version number to 40 for this update. * There is a major build change in this release. We are now using the Ruby-based ``asciidoctor'' implementation, rather than the Python-based ``asciidoc'' implementation, to process the specification. While the actual specification markup changes were minimal, this requires a new set of build tools and a very different installation process, especially because we now use an experimental direct-to-PDF backend for Asciidoctor instead of Docbook->dblatex->PDF. It is no longer possible to build the Specification using asciidoc. See doc/specs/vulkan/README.adoc for some guidance on installing the new toolchain components. * There are some minor rendering issues in the PDF output due to teething problems with the asciidoctor toolchain, especially with mathematical equations. We are aware of these and working on them. Github Issues: * Updated sample code for the <<sparsememory-examples-basic,sparse resource binding example>> (public issue 97). * Modify line and point clipping behavior in the <<vertexpostproc-clipping, Primitive Clipping>> section to allow for pop-free behavior. The ability to check for which behavior is implemented may be added a future feature or extension (public issue 113). * Unify the discussions of implicit ordering throughout the spec, in particular in the new sections <<drawing-primitive-order, Primitive Order>>, <<primrast-order, Rasterization Order>>, and <<synchronization-implicit, Implicit Synchronization Guarantees>>; the discussion of <<synchronization-submission-order, submission order>>; and references elsewhere to these sections (public issue 133). * Clarify \<\<descriptorsets-compatibility,Pipeline Layout Compatibility>> language and introduce the term ``identically defined'' (public issue 164). * Add a dependency to the +VK_EXT_debug_marker+ extension that's needed to reuse the object type enum from +VK_EXT_debug_report+, and moves the definition of that enum into +VK_EXT_debug_report+ where it should be (public issue 409). * Remove redundant valid usage statement from slink:VkImageBlit (public issue 421). * Update GL_KHR_vulkan_glsl to allow the ternary operator to result in a specialization constant (public issue 424). * Fix valid usage for flink:VkPipelineShaderStageCreateInfo (public issue 426). * Correct typo in New Objects list for <<VK_EXT_debug_report>> (public issue 447). Internal Issues: * Moved to asciidoctor for spec builds (internal issue 121). * Update style guide to describe where to put new extensions-specific asciidoc files, and what to name them (internal issue 626). * Add src/spec/indexExt.py to autogenerate registry index entries linking into the 1.0-extensions specification, instead of maintaining the index manually. (internal issue 642). * Autogenerate extension dependencies and lists of all extensions and all KHR extensions from the "supported" attributes in +vk.xml+. Execute +make config/extDependency.sh+ from +doc/specs/vulkan+ when a supported extension is added to vk.xml, to regenerate the dependency script. The consequence is that specifying a single extension to the +makeExt+ script will automatically enable all extensions it depends on as well, and that the +makeAllExts+ and +makeKHR+ scripts do not need to be updated when a new extension is supported (internal issue 648). * Put extension appendices all at the same asciidoc section level, so KHR WSI extensions show up in the HTML index (internal issue 648). Other Issues: * Imbed images in the generated HTML specs instead of loading them from the images/ directory. * Fix missing EXT in extension name (ename:VK_EXT_SWAPCHAIN_COLOR_SPACE_EXTENSION_NAME). * Add new +VK_EXT_SMPTE_2086_metadata+ extension. * In the <<platformCreateSurface_xlib,Xlib Surface>> section of the +VK_KHR_xlib_surface+ specification, add language warning users that they always need to call code:XinitThreads. * Use the term "presentable image" (rather than "swapchain image") consistently in +VK_KHR_swapchain+ and related extensions, and add a glossary term defining it. * Relocate the valid usage for samples of flink:vkGetPhysicalDeviceSparseImageFormatProperties2KHR::pname:pFormatInfo to be below the flink:VkPhysicalDeviceSparseImageFormatInfo2KHR structure.
2017-02-11 04:37:39 +00:00
\begin{aligned}
Change log for January 23, 2017 Vulkan 1.0.39 spec update: * Bump API patch number and header version number to 39 for this update. Github Issues: * Clarified that only accesses via the specified buffer/image subresource ranges are included in the access scopes (public issue 306). * Add missing valid usage statements for flink:vkCreateComputePipelines and flink:vkCreateGraphicsPipelines (public issue 427). Internal Issues: * Add a Note to the <<invariance,Invariance>> appendix about a difference between OpenGL and Vulkan with regards to how primitives derived from offsets are handled (internal issue 355). * Add the +<<VK_KHR_get_physical_device_properties2>>+, +<<VK_KHR_maintenance1>>+, and +<<VK_KHR_shader_draw_parameters>>+ extensions (internal issue 448). * Add the +<<VK_EXT_shader_subgroup_vote>>+ and +<<VK_EXT_shader_subgroup_ballot>>+ extensions (internal issue 449). * Update the texture level-of-detail equation in the <<textures-scale-factor,Scale Factor Operation>> section to better approximate the ellipse major and minor axes (internal issue 547). * Forbid non-explicitly allowed uses of interface decorations in the introduction to the <<interfaces,Shader Interfaces>> chapter (internal issue 607). * Replace use of MathJax with KaTeX, for improved load-time performance as well as avoiding the scrolling-and-scrolling behavior due to MathJax asynchronous rendering when loading at an anchor inside the spec. This change also requires moving to HTML5 output for the spec instead of XHTML, and there is a visible difference in that the chapter navigation index is now in a scrollable sidebar instead of at the top of the document. We may or may not retain the nav sidebar based on feedback (internal issue 613). * Improve consistency of markup and formatting in extension appendices (internal issue 631). Other Issues: * Add explicit valid usage statements to slink:VkImageCopy requiring that the source and destination layer ranges be contained in their respective source and destination images. * Add valid usage language for swapchain of flink:vkAcquireNextImage. If the swapchain has been replaced, then it should not be passed to flink:vkAcquireNextImage. * Add a valid usage statement to flink:vkCreateImageView, that the image must have been created with an appropriate usage bit set. * Noted that slink:VkDisplayPresentInfoKHR is a valid extension of slink:VkPresentInfoKHR in the <<wsi_swapchain,WSI Swapchain>> section. * Update valid usage for flink:vkCmdSetViewport and flink:vkCmdSetScissor to account for the multiple viewport feature. If the feature is not enabled, the parameters for these functions have required values that are defined in the <<features-features-multiViewport,multiple viewports>> section of the spec but were not reflected in the valid usage text for these functions. * Add the +<<VK_EXT_swapchain_colorspace>>+ extension defining common color spaces.
2017-01-18 04:11:25 +00:00
s & = \frac{s}{q}, & \text{for 1D, 2D, or 3D image} \\
\\
t & = \frac{t}{q}, & \text{for 2D or 3D image} \\
\\
r & = \frac{r}{q}, & \text{for 3D image} \\
\\
D_{ref} & = \frac{D_{ref}}{q}, & \text{if provided}
Change log for February 10, 2017 Vulkan 1.0.40 spec update: * Bump API patch number and header version number to 40 for this update. * There is a major build change in this release. We are now using the Ruby-based ``asciidoctor'' implementation, rather than the Python-based ``asciidoc'' implementation, to process the specification. While the actual specification markup changes were minimal, this requires a new set of build tools and a very different installation process, especially because we now use an experimental direct-to-PDF backend for Asciidoctor instead of Docbook->dblatex->PDF. It is no longer possible to build the Specification using asciidoc. See doc/specs/vulkan/README.adoc for some guidance on installing the new toolchain components. * There are some minor rendering issues in the PDF output due to teething problems with the asciidoctor toolchain, especially with mathematical equations. We are aware of these and working on them. Github Issues: * Updated sample code for the <<sparsememory-examples-basic,sparse resource binding example>> (public issue 97). * Modify line and point clipping behavior in the <<vertexpostproc-clipping, Primitive Clipping>> section to allow for pop-free behavior. The ability to check for which behavior is implemented may be added a future feature or extension (public issue 113). * Unify the discussions of implicit ordering throughout the spec, in particular in the new sections <<drawing-primitive-order, Primitive Order>>, <<primrast-order, Rasterization Order>>, and <<synchronization-implicit, Implicit Synchronization Guarantees>>; the discussion of <<synchronization-submission-order, submission order>>; and references elsewhere to these sections (public issue 133). * Clarify \<\<descriptorsets-compatibility,Pipeline Layout Compatibility>> language and introduce the term ``identically defined'' (public issue 164). * Add a dependency to the +VK_EXT_debug_marker+ extension that's needed to reuse the object type enum from +VK_EXT_debug_report+, and moves the definition of that enum into +VK_EXT_debug_report+ where it should be (public issue 409). * Remove redundant valid usage statement from slink:VkImageBlit (public issue 421). * Update GL_KHR_vulkan_glsl to allow the ternary operator to result in a specialization constant (public issue 424). * Fix valid usage for flink:VkPipelineShaderStageCreateInfo (public issue 426). * Correct typo in New Objects list for <<VK_EXT_debug_report>> (public issue 447). Internal Issues: * Moved to asciidoctor for spec builds (internal issue 121). * Update style guide to describe where to put new extensions-specific asciidoc files, and what to name them (internal issue 626). * Add src/spec/indexExt.py to autogenerate registry index entries linking into the 1.0-extensions specification, instead of maintaining the index manually. (internal issue 642). * Autogenerate extension dependencies and lists of all extensions and all KHR extensions from the "supported" attributes in +vk.xml+. Execute +make config/extDependency.sh+ from +doc/specs/vulkan+ when a supported extension is added to vk.xml, to regenerate the dependency script. The consequence is that specifying a single extension to the +makeExt+ script will automatically enable all extensions it depends on as well, and that the +makeAllExts+ and +makeKHR+ scripts do not need to be updated when a new extension is supported (internal issue 648). * Put extension appendices all at the same asciidoc section level, so KHR WSI extensions show up in the HTML index (internal issue 648). Other Issues: * Imbed images in the generated HTML specs instead of loading them from the images/ directory. * Fix missing EXT in extension name (ename:VK_EXT_SWAPCHAIN_COLOR_SPACE_EXTENSION_NAME). * Add new +VK_EXT_SMPTE_2086_metadata+ extension. * In the <<platformCreateSurface_xlib,Xlib Surface>> section of the +VK_KHR_xlib_surface+ specification, add language warning users that they always need to call code:XinitThreads. * Use the term "presentable image" (rather than "swapchain image") consistently in +VK_KHR_swapchain+ and related extensions, and add a glossary term defining it. * Relocate the valid usage for samples of flink:vkGetPhysicalDeviceSparseImageFormatProperties2KHR::pname:pFormatInfo to be below the flink:VkPhysicalDeviceSparseImageFormatInfo2KHR structure.
2017-02-11 04:37:39 +00:00
\end{aligned}
Change log for January 23, 2017 Vulkan 1.0.39 spec update: * Bump API patch number and header version number to 39 for this update. Github Issues: * Clarified that only accesses via the specified buffer/image subresource ranges are included in the access scopes (public issue 306). * Add missing valid usage statements for flink:vkCreateComputePipelines and flink:vkCreateGraphicsPipelines (public issue 427). Internal Issues: * Add a Note to the <<invariance,Invariance>> appendix about a difference between OpenGL and Vulkan with regards to how primitives derived from offsets are handled (internal issue 355). * Add the +<<VK_KHR_get_physical_device_properties2>>+, +<<VK_KHR_maintenance1>>+, and +<<VK_KHR_shader_draw_parameters>>+ extensions (internal issue 448). * Add the +<<VK_EXT_shader_subgroup_vote>>+ and +<<VK_EXT_shader_subgroup_ballot>>+ extensions (internal issue 449). * Update the texture level-of-detail equation in the <<textures-scale-factor,Scale Factor Operation>> section to better approximate the ellipse major and minor axes (internal issue 547). * Forbid non-explicitly allowed uses of interface decorations in the introduction to the <<interfaces,Shader Interfaces>> chapter (internal issue 607). * Replace use of MathJax with KaTeX, for improved load-time performance as well as avoiding the scrolling-and-scrolling behavior due to MathJax asynchronous rendering when loading at an anchor inside the spec. This change also requires moving to HTML5 output for the spec instead of XHTML, and there is a visible difference in that the chapter navigation index is now in a scrollable sidebar instead of at the top of the document. We may or may not retain the nav sidebar based on feedback (internal issue 613). * Improve consistency of markup and formatting in extension appendices (internal issue 631). Other Issues: * Add explicit valid usage statements to slink:VkImageCopy requiring that the source and destination layer ranges be contained in their respective source and destination images. * Add valid usage language for swapchain of flink:vkAcquireNextImage. If the swapchain has been replaced, then it should not be passed to flink:vkAcquireNextImage. * Add a valid usage statement to flink:vkCreateImageView, that the image must have been created with an appropriate usage bit set. * Noted that slink:VkDisplayPresentInfoKHR is a valid extension of slink:VkPresentInfoKHR in the <<wsi_swapchain,WSI Swapchain>> section. * Update valid usage for flink:vkCmdSetViewport and flink:vkCmdSetScissor to account for the multiple viewport feature. If the feature is not enabled, the parameters for these functions have required values that are defined in the <<features-features-multiViewport,multiple viewports>> section of the spec but were not reflected in the valid usage text for these functions. * Add the +<<VK_EXT_swapchain_colorspace>>+ extension defining common color spaces.
2017-01-18 04:11:25 +00:00
+++++++++++++++++++
=== latexmath block 32
[latexmath]
+++++++++++++++++++
Change log for February 10, 2017 Vulkan 1.0.40 spec update: * Bump API patch number and header version number to 40 for this update. * There is a major build change in this release. We are now using the Ruby-based ``asciidoctor'' implementation, rather than the Python-based ``asciidoc'' implementation, to process the specification. While the actual specification markup changes were minimal, this requires a new set of build tools and a very different installation process, especially because we now use an experimental direct-to-PDF backend for Asciidoctor instead of Docbook->dblatex->PDF. It is no longer possible to build the Specification using asciidoc. See doc/specs/vulkan/README.adoc for some guidance on installing the new toolchain components. * There are some minor rendering issues in the PDF output due to teething problems with the asciidoctor toolchain, especially with mathematical equations. We are aware of these and working on them. Github Issues: * Updated sample code for the <<sparsememory-examples-basic,sparse resource binding example>> (public issue 97). * Modify line and point clipping behavior in the <<vertexpostproc-clipping, Primitive Clipping>> section to allow for pop-free behavior. The ability to check for which behavior is implemented may be added a future feature or extension (public issue 113). * Unify the discussions of implicit ordering throughout the spec, in particular in the new sections <<drawing-primitive-order, Primitive Order>>, <<primrast-order, Rasterization Order>>, and <<synchronization-implicit, Implicit Synchronization Guarantees>>; the discussion of <<synchronization-submission-order, submission order>>; and references elsewhere to these sections (public issue 133). * Clarify \<\<descriptorsets-compatibility,Pipeline Layout Compatibility>> language and introduce the term ``identically defined'' (public issue 164). * Add a dependency to the +VK_EXT_debug_marker+ extension that's needed to reuse the object type enum from +VK_EXT_debug_report+, and moves the definition of that enum into +VK_EXT_debug_report+ where it should be (public issue 409). * Remove redundant valid usage statement from slink:VkImageBlit (public issue 421). * Update GL_KHR_vulkan_glsl to allow the ternary operator to result in a specialization constant (public issue 424). * Fix valid usage for flink:VkPipelineShaderStageCreateInfo (public issue 426). * Correct typo in New Objects list for <<VK_EXT_debug_report>> (public issue 447). Internal Issues: * Moved to asciidoctor for spec builds (internal issue 121). * Update style guide to describe where to put new extensions-specific asciidoc files, and what to name them (internal issue 626). * Add src/spec/indexExt.py to autogenerate registry index entries linking into the 1.0-extensions specification, instead of maintaining the index manually. (internal issue 642). * Autogenerate extension dependencies and lists of all extensions and all KHR extensions from the "supported" attributes in +vk.xml+. Execute +make config/extDependency.sh+ from +doc/specs/vulkan+ when a supported extension is added to vk.xml, to regenerate the dependency script. The consequence is that specifying a single extension to the +makeExt+ script will automatically enable all extensions it depends on as well, and that the +makeAllExts+ and +makeKHR+ scripts do not need to be updated when a new extension is supported (internal issue 648). * Put extension appendices all at the same asciidoc section level, so KHR WSI extensions show up in the HTML index (internal issue 648). Other Issues: * Imbed images in the generated HTML specs instead of loading them from the images/ directory. * Fix missing EXT in extension name (ename:VK_EXT_SWAPCHAIN_COLOR_SPACE_EXTENSION_NAME). * Add new +VK_EXT_SMPTE_2086_metadata+ extension. * In the <<platformCreateSurface_xlib,Xlib Surface>> section of the +VK_KHR_xlib_surface+ specification, add language warning users that they always need to call code:XinitThreads. * Use the term "presentable image" (rather than "swapchain image") consistently in +VK_KHR_swapchain+ and related extensions, and add a glossary term defining it. * Relocate the valid usage for samples of flink:vkGetPhysicalDeviceSparseImageFormatProperties2KHR::pname:pFormatInfo to be below the flink:VkPhysicalDeviceSparseImageFormatInfo2KHR structure.
2017-02-11 04:37:39 +00:00
\begin{aligned}
Change log for January 23, 2017 Vulkan 1.0.39 spec update: * Bump API patch number and header version number to 39 for this update. Github Issues: * Clarified that only accesses via the specified buffer/image subresource ranges are included in the access scopes (public issue 306). * Add missing valid usage statements for flink:vkCreateComputePipelines and flink:vkCreateGraphicsPipelines (public issue 427). Internal Issues: * Add a Note to the <<invariance,Invariance>> appendix about a difference between OpenGL and Vulkan with regards to how primitives derived from offsets are handled (internal issue 355). * Add the +<<VK_KHR_get_physical_device_properties2>>+, +<<VK_KHR_maintenance1>>+, and +<<VK_KHR_shader_draw_parameters>>+ extensions (internal issue 448). * Add the +<<VK_EXT_shader_subgroup_vote>>+ and +<<VK_EXT_shader_subgroup_ballot>>+ extensions (internal issue 449). * Update the texture level-of-detail equation in the <<textures-scale-factor,Scale Factor Operation>> section to better approximate the ellipse major and minor axes (internal issue 547). * Forbid non-explicitly allowed uses of interface decorations in the introduction to the <<interfaces,Shader Interfaces>> chapter (internal issue 607). * Replace use of MathJax with KaTeX, for improved load-time performance as well as avoiding the scrolling-and-scrolling behavior due to MathJax asynchronous rendering when loading at an anchor inside the spec. This change also requires moving to HTML5 output for the spec instead of XHTML, and there is a visible difference in that the chapter navigation index is now in a scrollable sidebar instead of at the top of the document. We may or may not retain the nav sidebar based on feedback (internal issue 613). * Improve consistency of markup and formatting in extension appendices (internal issue 631). Other Issues: * Add explicit valid usage statements to slink:VkImageCopy requiring that the source and destination layer ranges be contained in their respective source and destination images. * Add valid usage language for swapchain of flink:vkAcquireNextImage. If the swapchain has been replaced, then it should not be passed to flink:vkAcquireNextImage. * Add a valid usage statement to flink:vkCreateImageView, that the image must have been created with an appropriate usage bit set. * Noted that slink:VkDisplayPresentInfoKHR is a valid extension of slink:VkPresentInfoKHR in the <<wsi_swapchain,WSI Swapchain>> section. * Update valid usage for flink:vkCmdSetViewport and flink:vkCmdSetScissor to account for the multiple viewport feature. If the feature is not enabled, the parameters for these functions have required values that are defined in the <<features-features-multiViewport,multiple viewports>> section of the spec but were not reflected in the valid usage text for these functions. * Add the +<<VK_EXT_swapchain_colorspace>>+ extension defining common color spaces.
2017-01-18 04:11:25 +00:00
\partial{s}/\partial{x} & = dPdx(s), & \partial{s}/\partial{y} & = dPdy(s), & \text{for 1D, 2D, Cube, or 3D image} \\
\partial{t}/\partial{x} & = dPdx(t), & \partial{t}/\partial{y} & = dPdy(t), & \text{for 2D, Cube, or 3D image} \\
\partial{u}/\partial{x} & = dPdx(u), & \partial{u}/\partial{y} & = dPdy(u), & \text{for Cube or 3D image}
Change log for February 10, 2017 Vulkan 1.0.40 spec update: * Bump API patch number and header version number to 40 for this update. * There is a major build change in this release. We are now using the Ruby-based ``asciidoctor'' implementation, rather than the Python-based ``asciidoc'' implementation, to process the specification. While the actual specification markup changes were minimal, this requires a new set of build tools and a very different installation process, especially because we now use an experimental direct-to-PDF backend for Asciidoctor instead of Docbook->dblatex->PDF. It is no longer possible to build the Specification using asciidoc. See doc/specs/vulkan/README.adoc for some guidance on installing the new toolchain components. * There are some minor rendering issues in the PDF output due to teething problems with the asciidoctor toolchain, especially with mathematical equations. We are aware of these and working on them. Github Issues: * Updated sample code for the <<sparsememory-examples-basic,sparse resource binding example>> (public issue 97). * Modify line and point clipping behavior in the <<vertexpostproc-clipping, Primitive Clipping>> section to allow for pop-free behavior. The ability to check for which behavior is implemented may be added a future feature or extension (public issue 113). * Unify the discussions of implicit ordering throughout the spec, in particular in the new sections <<drawing-primitive-order, Primitive Order>>, <<primrast-order, Rasterization Order>>, and <<synchronization-implicit, Implicit Synchronization Guarantees>>; the discussion of <<synchronization-submission-order, submission order>>; and references elsewhere to these sections (public issue 133). * Clarify \<\<descriptorsets-compatibility,Pipeline Layout Compatibility>> language and introduce the term ``identically defined'' (public issue 164). * Add a dependency to the +VK_EXT_debug_marker+ extension that's needed to reuse the object type enum from +VK_EXT_debug_report+, and moves the definition of that enum into +VK_EXT_debug_report+ where it should be (public issue 409). * Remove redundant valid usage statement from slink:VkImageBlit (public issue 421). * Update GL_KHR_vulkan_glsl to allow the ternary operator to result in a specialization constant (public issue 424). * Fix valid usage for flink:VkPipelineShaderStageCreateInfo (public issue 426). * Correct typo in New Objects list for <<VK_EXT_debug_report>> (public issue 447). Internal Issues: * Moved to asciidoctor for spec builds (internal issue 121). * Update style guide to describe where to put new extensions-specific asciidoc files, and what to name them (internal issue 626). * Add src/spec/indexExt.py to autogenerate registry index entries linking into the 1.0-extensions specification, instead of maintaining the index manually. (internal issue 642). * Autogenerate extension dependencies and lists of all extensions and all KHR extensions from the "supported" attributes in +vk.xml+. Execute +make config/extDependency.sh+ from +doc/specs/vulkan+ when a supported extension is added to vk.xml, to regenerate the dependency script. The consequence is that specifying a single extension to the +makeExt+ script will automatically enable all extensions it depends on as well, and that the +makeAllExts+ and +makeKHR+ scripts do not need to be updated when a new extension is supported (internal issue 648). * Put extension appendices all at the same asciidoc section level, so KHR WSI extensions show up in the HTML index (internal issue 648). Other Issues: * Imbed images in the generated HTML specs instead of loading them from the images/ directory. * Fix missing EXT in extension name (ename:VK_EXT_SWAPCHAIN_COLOR_SPACE_EXTENSION_NAME). * Add new +VK_EXT_SMPTE_2086_metadata+ extension. * In the <<platformCreateSurface_xlib,Xlib Surface>> section of the +VK_KHR_xlib_surface+ specification, add language warning users that they always need to call code:XinitThreads. * Use the term "presentable image" (rather than "swapchain image") consistently in +VK_KHR_swapchain+ and related extensions, and add a glossary term defining it. * Relocate the valid usage for samples of flink:vkGetPhysicalDeviceSparseImageFormatProperties2KHR::pname:pFormatInfo to be below the flink:VkPhysicalDeviceSparseImageFormatInfo2KHR structure.
2017-02-11 04:37:39 +00:00
\end{aligned}
Change log for January 23, 2017 Vulkan 1.0.39 spec update: * Bump API patch number and header version number to 39 for this update. Github Issues: * Clarified that only accesses via the specified buffer/image subresource ranges are included in the access scopes (public issue 306). * Add missing valid usage statements for flink:vkCreateComputePipelines and flink:vkCreateGraphicsPipelines (public issue 427). Internal Issues: * Add a Note to the <<invariance,Invariance>> appendix about a difference between OpenGL and Vulkan with regards to how primitives derived from offsets are handled (internal issue 355). * Add the +<<VK_KHR_get_physical_device_properties2>>+, +<<VK_KHR_maintenance1>>+, and +<<VK_KHR_shader_draw_parameters>>+ extensions (internal issue 448). * Add the +<<VK_EXT_shader_subgroup_vote>>+ and +<<VK_EXT_shader_subgroup_ballot>>+ extensions (internal issue 449). * Update the texture level-of-detail equation in the <<textures-scale-factor,Scale Factor Operation>> section to better approximate the ellipse major and minor axes (internal issue 547). * Forbid non-explicitly allowed uses of interface decorations in the introduction to the <<interfaces,Shader Interfaces>> chapter (internal issue 607). * Replace use of MathJax with KaTeX, for improved load-time performance as well as avoiding the scrolling-and-scrolling behavior due to MathJax asynchronous rendering when loading at an anchor inside the spec. This change also requires moving to HTML5 output for the spec instead of XHTML, and there is a visible difference in that the chapter navigation index is now in a scrollable sidebar instead of at the top of the document. We may or may not retain the nav sidebar based on feedback (internal issue 613). * Improve consistency of markup and formatting in extension appendices (internal issue 631). Other Issues: * Add explicit valid usage statements to slink:VkImageCopy requiring that the source and destination layer ranges be contained in their respective source and destination images. * Add valid usage language for swapchain of flink:vkAcquireNextImage. If the swapchain has been replaced, then it should not be passed to flink:vkAcquireNextImage. * Add a valid usage statement to flink:vkCreateImageView, that the image must have been created with an appropriate usage bit set. * Noted that slink:VkDisplayPresentInfoKHR is a valid extension of slink:VkPresentInfoKHR in the <<wsi_swapchain,WSI Swapchain>> section. * Update valid usage for flink:vkCmdSetViewport and flink:vkCmdSetScissor to account for the multiple viewport feature. If the feature is not enabled, the parameters for these functions have required values that are defined in the <<features-features-multiViewport,multiple viewports>> section of the spec but were not reflected in the valid usage text for these functions. * Add the +<<VK_EXT_swapchain_colorspace>>+ extension defining common color spaces.
2017-01-18 04:11:25 +00:00
+++++++++++++++++++
=== latexmath block 33
[latexmath]
++++++++++++++++++++++++
Change log for February 10, 2017 Vulkan 1.0.40 spec update: * Bump API patch number and header version number to 40 for this update. * There is a major build change in this release. We are now using the Ruby-based ``asciidoctor'' implementation, rather than the Python-based ``asciidoc'' implementation, to process the specification. While the actual specification markup changes were minimal, this requires a new set of build tools and a very different installation process, especially because we now use an experimental direct-to-PDF backend for Asciidoctor instead of Docbook->dblatex->PDF. It is no longer possible to build the Specification using asciidoc. See doc/specs/vulkan/README.adoc for some guidance on installing the new toolchain components. * There are some minor rendering issues in the PDF output due to teething problems with the asciidoctor toolchain, especially with mathematical equations. We are aware of these and working on them. Github Issues: * Updated sample code for the <<sparsememory-examples-basic,sparse resource binding example>> (public issue 97). * Modify line and point clipping behavior in the <<vertexpostproc-clipping, Primitive Clipping>> section to allow for pop-free behavior. The ability to check for which behavior is implemented may be added a future feature or extension (public issue 113). * Unify the discussions of implicit ordering throughout the spec, in particular in the new sections <<drawing-primitive-order, Primitive Order>>, <<primrast-order, Rasterization Order>>, and <<synchronization-implicit, Implicit Synchronization Guarantees>>; the discussion of <<synchronization-submission-order, submission order>>; and references elsewhere to these sections (public issue 133). * Clarify \<\<descriptorsets-compatibility,Pipeline Layout Compatibility>> language and introduce the term ``identically defined'' (public issue 164). * Add a dependency to the +VK_EXT_debug_marker+ extension that's needed to reuse the object type enum from +VK_EXT_debug_report+, and moves the definition of that enum into +VK_EXT_debug_report+ where it should be (public issue 409). * Remove redundant valid usage statement from slink:VkImageBlit (public issue 421). * Update GL_KHR_vulkan_glsl to allow the ternary operator to result in a specialization constant (public issue 424). * Fix valid usage for flink:VkPipelineShaderStageCreateInfo (public issue 426). * Correct typo in New Objects list for <<VK_EXT_debug_report>> (public issue 447). Internal Issues: * Moved to asciidoctor for spec builds (internal issue 121). * Update style guide to describe where to put new extensions-specific asciidoc files, and what to name them (internal issue 626). * Add src/spec/indexExt.py to autogenerate registry index entries linking into the 1.0-extensions specification, instead of maintaining the index manually. (internal issue 642). * Autogenerate extension dependencies and lists of all extensions and all KHR extensions from the "supported" attributes in +vk.xml+. Execute +make config/extDependency.sh+ from +doc/specs/vulkan+ when a supported extension is added to vk.xml, to regenerate the dependency script. The consequence is that specifying a single extension to the +makeExt+ script will automatically enable all extensions it depends on as well, and that the +makeAllExts+ and +makeKHR+ scripts do not need to be updated when a new extension is supported (internal issue 648). * Put extension appendices all at the same asciidoc section level, so KHR WSI extensions show up in the HTML index (internal issue 648). Other Issues: * Imbed images in the generated HTML specs instead of loading them from the images/ directory. * Fix missing EXT in extension name (ename:VK_EXT_SWAPCHAIN_COLOR_SPACE_EXTENSION_NAME). * Add new +VK_EXT_SMPTE_2086_metadata+ extension. * In the <<platformCreateSurface_xlib,Xlib Surface>> section of the +VK_KHR_xlib_surface+ specification, add language warning users that they always need to call code:XinitThreads. * Use the term "presentable image" (rather than "swapchain image") consistently in +VK_KHR_swapchain+ and related extensions, and add a glossary term defining it. * Relocate the valid usage for samples of flink:vkGetPhysicalDeviceSparseImageFormatProperties2KHR::pname:pFormatInfo to be below the flink:VkPhysicalDeviceSparseImageFormatInfo2KHR structure.
2017-02-11 04:37:39 +00:00
\begin{aligned}
Change log for January 23, 2017 Vulkan 1.0.39 spec update: * Bump API patch number and header version number to 39 for this update. Github Issues: * Clarified that only accesses via the specified buffer/image subresource ranges are included in the access scopes (public issue 306). * Add missing valid usage statements for flink:vkCreateComputePipelines and flink:vkCreateGraphicsPipelines (public issue 427). Internal Issues: * Add a Note to the <<invariance,Invariance>> appendix about a difference between OpenGL and Vulkan with regards to how primitives derived from offsets are handled (internal issue 355). * Add the +<<VK_KHR_get_physical_device_properties2>>+, +<<VK_KHR_maintenance1>>+, and +<<VK_KHR_shader_draw_parameters>>+ extensions (internal issue 448). * Add the +<<VK_EXT_shader_subgroup_vote>>+ and +<<VK_EXT_shader_subgroup_ballot>>+ extensions (internal issue 449). * Update the texture level-of-detail equation in the <<textures-scale-factor,Scale Factor Operation>> section to better approximate the ellipse major and minor axes (internal issue 547). * Forbid non-explicitly allowed uses of interface decorations in the introduction to the <<interfaces,Shader Interfaces>> chapter (internal issue 607). * Replace use of MathJax with KaTeX, for improved load-time performance as well as avoiding the scrolling-and-scrolling behavior due to MathJax asynchronous rendering when loading at an anchor inside the spec. This change also requires moving to HTML5 output for the spec instead of XHTML, and there is a visible difference in that the chapter navigation index is now in a scrollable sidebar instead of at the top of the document. We may or may not retain the nav sidebar based on feedback (internal issue 613). * Improve consistency of markup and formatting in extension appendices (internal issue 631). Other Issues: * Add explicit valid usage statements to slink:VkImageCopy requiring that the source and destination layer ranges be contained in their respective source and destination images. * Add valid usage language for swapchain of flink:vkAcquireNextImage. If the swapchain has been replaced, then it should not be passed to flink:vkAcquireNextImage. * Add a valid usage statement to flink:vkCreateImageView, that the image must have been created with an appropriate usage bit set. * Noted that slink:VkDisplayPresentInfoKHR is a valid extension of slink:VkPresentInfoKHR in the <<wsi_swapchain,WSI Swapchain>> section. * Update valid usage for flink:vkCmdSetViewport and flink:vkCmdSetScissor to account for the multiple viewport feature. If the feature is not enabled, the parameters for these functions have required values that are defined in the <<features-features-multiViewport,multiple viewports>> section of the spec but were not reflected in the valid usage text for these functions. * Add the +<<VK_EXT_swapchain_colorspace>>+ extension defining common color spaces.
2017-01-18 04:11:25 +00:00
s_{face} & =
\frac{1}{2} \times \frac{s_c}{|r_c|} + \frac{1}{2} \\
t_{face} & =
\frac{1}{2} \times \frac{t_c}{|r_c|} + \frac{1}{2} \\
Change log for February 10, 2017 Vulkan 1.0.40 spec update: * Bump API patch number and header version number to 40 for this update. * There is a major build change in this release. We are now using the Ruby-based ``asciidoctor'' implementation, rather than the Python-based ``asciidoc'' implementation, to process the specification. While the actual specification markup changes were minimal, this requires a new set of build tools and a very different installation process, especially because we now use an experimental direct-to-PDF backend for Asciidoctor instead of Docbook->dblatex->PDF. It is no longer possible to build the Specification using asciidoc. See doc/specs/vulkan/README.adoc for some guidance on installing the new toolchain components. * There are some minor rendering issues in the PDF output due to teething problems with the asciidoctor toolchain, especially with mathematical equations. We are aware of these and working on them. Github Issues: * Updated sample code for the <<sparsememory-examples-basic,sparse resource binding example>> (public issue 97). * Modify line and point clipping behavior in the <<vertexpostproc-clipping, Primitive Clipping>> section to allow for pop-free behavior. The ability to check for which behavior is implemented may be added a future feature or extension (public issue 113). * Unify the discussions of implicit ordering throughout the spec, in particular in the new sections <<drawing-primitive-order, Primitive Order>>, <<primrast-order, Rasterization Order>>, and <<synchronization-implicit, Implicit Synchronization Guarantees>>; the discussion of <<synchronization-submission-order, submission order>>; and references elsewhere to these sections (public issue 133). * Clarify \<\<descriptorsets-compatibility,Pipeline Layout Compatibility>> language and introduce the term ``identically defined'' (public issue 164). * Add a dependency to the +VK_EXT_debug_marker+ extension that's needed to reuse the object type enum from +VK_EXT_debug_report+, and moves the definition of that enum into +VK_EXT_debug_report+ where it should be (public issue 409). * Remove redundant valid usage statement from slink:VkImageBlit (public issue 421). * Update GL_KHR_vulkan_glsl to allow the ternary operator to result in a specialization constant (public issue 424). * Fix valid usage for flink:VkPipelineShaderStageCreateInfo (public issue 426). * Correct typo in New Objects list for <<VK_EXT_debug_report>> (public issue 447). Internal Issues: * Moved to asciidoctor for spec builds (internal issue 121). * Update style guide to describe where to put new extensions-specific asciidoc files, and what to name them (internal issue 626). * Add src/spec/indexExt.py to autogenerate registry index entries linking into the 1.0-extensions specification, instead of maintaining the index manually. (internal issue 642). * Autogenerate extension dependencies and lists of all extensions and all KHR extensions from the "supported" attributes in +vk.xml+. Execute +make config/extDependency.sh+ from +doc/specs/vulkan+ when a supported extension is added to vk.xml, to regenerate the dependency script. The consequence is that specifying a single extension to the +makeExt+ script will automatically enable all extensions it depends on as well, and that the +makeAllExts+ and +makeKHR+ scripts do not need to be updated when a new extension is supported (internal issue 648). * Put extension appendices all at the same asciidoc section level, so KHR WSI extensions show up in the HTML index (internal issue 648). Other Issues: * Imbed images in the generated HTML specs instead of loading them from the images/ directory. * Fix missing EXT in extension name (ename:VK_EXT_SWAPCHAIN_COLOR_SPACE_EXTENSION_NAME). * Add new +VK_EXT_SMPTE_2086_metadata+ extension. * In the <<platformCreateSurface_xlib,Xlib Surface>> section of the +VK_KHR_xlib_surface+ specification, add language warning users that they always need to call code:XinitThreads. * Use the term "presentable image" (rather than "swapchain image") consistently in +VK_KHR_swapchain+ and related extensions, and add a glossary term defining it. * Relocate the valid usage for samples of flink:vkGetPhysicalDeviceSparseImageFormatProperties2KHR::pname:pFormatInfo to be below the flink:VkPhysicalDeviceSparseImageFormatInfo2KHR structure.
2017-02-11 04:37:39 +00:00
\end{aligned}
Change log for January 23, 2017 Vulkan 1.0.39 spec update: * Bump API patch number and header version number to 39 for this update. Github Issues: * Clarified that only accesses via the specified buffer/image subresource ranges are included in the access scopes (public issue 306). * Add missing valid usage statements for flink:vkCreateComputePipelines and flink:vkCreateGraphicsPipelines (public issue 427). Internal Issues: * Add a Note to the <<invariance,Invariance>> appendix about a difference between OpenGL and Vulkan with regards to how primitives derived from offsets are handled (internal issue 355). * Add the +<<VK_KHR_get_physical_device_properties2>>+, +<<VK_KHR_maintenance1>>+, and +<<VK_KHR_shader_draw_parameters>>+ extensions (internal issue 448). * Add the +<<VK_EXT_shader_subgroup_vote>>+ and +<<VK_EXT_shader_subgroup_ballot>>+ extensions (internal issue 449). * Update the texture level-of-detail equation in the <<textures-scale-factor,Scale Factor Operation>> section to better approximate the ellipse major and minor axes (internal issue 547). * Forbid non-explicitly allowed uses of interface decorations in the introduction to the <<interfaces,Shader Interfaces>> chapter (internal issue 607). * Replace use of MathJax with KaTeX, for improved load-time performance as well as avoiding the scrolling-and-scrolling behavior due to MathJax asynchronous rendering when loading at an anchor inside the spec. This change also requires moving to HTML5 output for the spec instead of XHTML, and there is a visible difference in that the chapter navigation index is now in a scrollable sidebar instead of at the top of the document. We may or may not retain the nav sidebar based on feedback (internal issue 613). * Improve consistency of markup and formatting in extension appendices (internal issue 631). Other Issues: * Add explicit valid usage statements to slink:VkImageCopy requiring that the source and destination layer ranges be contained in their respective source and destination images. * Add valid usage language for swapchain of flink:vkAcquireNextImage. If the swapchain has been replaced, then it should not be passed to flink:vkAcquireNextImage. * Add a valid usage statement to flink:vkCreateImageView, that the image must have been created with an appropriate usage bit set. * Noted that slink:VkDisplayPresentInfoKHR is a valid extension of slink:VkPresentInfoKHR in the <<wsi_swapchain,WSI Swapchain>> section. * Update valid usage for flink:vkCmdSetViewport and flink:vkCmdSetScissor to account for the multiple viewport feature. If the feature is not enabled, the parameters for these functions have required values that are defined in the <<features-features-multiViewport,multiple viewports>> section of the spec but were not reflected in the valid usage text for these functions. * Add the +<<VK_EXT_swapchain_colorspace>>+ extension defining common color spaces.
2017-01-18 04:11:25 +00:00
++++++++++++++++++++++++
=== latexmath block 34
[latexmath]
++++++++++++++++++++++++
Change log for February 10, 2017 Vulkan 1.0.40 spec update: * Bump API patch number and header version number to 40 for this update. * There is a major build change in this release. We are now using the Ruby-based ``asciidoctor'' implementation, rather than the Python-based ``asciidoc'' implementation, to process the specification. While the actual specification markup changes were minimal, this requires a new set of build tools and a very different installation process, especially because we now use an experimental direct-to-PDF backend for Asciidoctor instead of Docbook->dblatex->PDF. It is no longer possible to build the Specification using asciidoc. See doc/specs/vulkan/README.adoc for some guidance on installing the new toolchain components. * There are some minor rendering issues in the PDF output due to teething problems with the asciidoctor toolchain, especially with mathematical equations. We are aware of these and working on them. Github Issues: * Updated sample code for the <<sparsememory-examples-basic,sparse resource binding example>> (public issue 97). * Modify line and point clipping behavior in the <<vertexpostproc-clipping, Primitive Clipping>> section to allow for pop-free behavior. The ability to check for which behavior is implemented may be added a future feature or extension (public issue 113). * Unify the discussions of implicit ordering throughout the spec, in particular in the new sections <<drawing-primitive-order, Primitive Order>>, <<primrast-order, Rasterization Order>>, and <<synchronization-implicit, Implicit Synchronization Guarantees>>; the discussion of <<synchronization-submission-order, submission order>>; and references elsewhere to these sections (public issue 133). * Clarify \<\<descriptorsets-compatibility,Pipeline Layout Compatibility>> language and introduce the term ``identically defined'' (public issue 164). * Add a dependency to the +VK_EXT_debug_marker+ extension that's needed to reuse the object type enum from +VK_EXT_debug_report+, and moves the definition of that enum into +VK_EXT_debug_report+ where it should be (public issue 409). * Remove redundant valid usage statement from slink:VkImageBlit (public issue 421). * Update GL_KHR_vulkan_glsl to allow the ternary operator to result in a specialization constant (public issue 424). * Fix valid usage for flink:VkPipelineShaderStageCreateInfo (public issue 426). * Correct typo in New Objects list for <<VK_EXT_debug_report>> (public issue 447). Internal Issues: * Moved to asciidoctor for spec builds (internal issue 121). * Update style guide to describe where to put new extensions-specific asciidoc files, and what to name them (internal issue 626). * Add src/spec/indexExt.py to autogenerate registry index entries linking into the 1.0-extensions specification, instead of maintaining the index manually. (internal issue 642). * Autogenerate extension dependencies and lists of all extensions and all KHR extensions from the "supported" attributes in +vk.xml+. Execute +make config/extDependency.sh+ from +doc/specs/vulkan+ when a supported extension is added to vk.xml, to regenerate the dependency script. The consequence is that specifying a single extension to the +makeExt+ script will automatically enable all extensions it depends on as well, and that the +makeAllExts+ and +makeKHR+ scripts do not need to be updated when a new extension is supported (internal issue 648). * Put extension appendices all at the same asciidoc section level, so KHR WSI extensions show up in the HTML index (internal issue 648). Other Issues: * Imbed images in the generated HTML specs instead of loading them from the images/ directory. * Fix missing EXT in extension name (ename:VK_EXT_SWAPCHAIN_COLOR_SPACE_EXTENSION_NAME). * Add new +VK_EXT_SMPTE_2086_metadata+ extension. * In the <<platformCreateSurface_xlib,Xlib Surface>> section of the +VK_KHR_xlib_surface+ specification, add language warning users that they always need to call code:XinitThreads. * Use the term "presentable image" (rather than "swapchain image") consistently in +VK_KHR_swapchain+ and related extensions, and add a glossary term defining it. * Relocate the valid usage for samples of flink:vkGetPhysicalDeviceSparseImageFormatProperties2KHR::pname:pFormatInfo to be below the flink:VkPhysicalDeviceSparseImageFormatInfo2KHR structure.
2017-02-11 04:37:39 +00:00
\begin{aligned}
Change log for January 23, 2017 Vulkan 1.0.39 spec update: * Bump API patch number and header version number to 39 for this update. Github Issues: * Clarified that only accesses via the specified buffer/image subresource ranges are included in the access scopes (public issue 306). * Add missing valid usage statements for flink:vkCreateComputePipelines and flink:vkCreateGraphicsPipelines (public issue 427). Internal Issues: * Add a Note to the <<invariance,Invariance>> appendix about a difference between OpenGL and Vulkan with regards to how primitives derived from offsets are handled (internal issue 355). * Add the +<<VK_KHR_get_physical_device_properties2>>+, +<<VK_KHR_maintenance1>>+, and +<<VK_KHR_shader_draw_parameters>>+ extensions (internal issue 448). * Add the +<<VK_EXT_shader_subgroup_vote>>+ and +<<VK_EXT_shader_subgroup_ballot>>+ extensions (internal issue 449). * Update the texture level-of-detail equation in the <<textures-scale-factor,Scale Factor Operation>> section to better approximate the ellipse major and minor axes (internal issue 547). * Forbid non-explicitly allowed uses of interface decorations in the introduction to the <<interfaces,Shader Interfaces>> chapter (internal issue 607). * Replace use of MathJax with KaTeX, for improved load-time performance as well as avoiding the scrolling-and-scrolling behavior due to MathJax asynchronous rendering when loading at an anchor inside the spec. This change also requires moving to HTML5 output for the spec instead of XHTML, and there is a visible difference in that the chapter navigation index is now in a scrollable sidebar instead of at the top of the document. We may or may not retain the nav sidebar based on feedback (internal issue 613). * Improve consistency of markup and formatting in extension appendices (internal issue 631). Other Issues: * Add explicit valid usage statements to slink:VkImageCopy requiring that the source and destination layer ranges be contained in their respective source and destination images. * Add valid usage language for swapchain of flink:vkAcquireNextImage. If the swapchain has been replaced, then it should not be passed to flink:vkAcquireNextImage. * Add a valid usage statement to flink:vkCreateImageView, that the image must have been created with an appropriate usage bit set. * Noted that slink:VkDisplayPresentInfoKHR is a valid extension of slink:VkPresentInfoKHR in the <<wsi_swapchain,WSI Swapchain>> section. * Update valid usage for flink:vkCmdSetViewport and flink:vkCmdSetScissor to account for the multiple viewport feature. If the feature is not enabled, the parameters for these functions have required values that are defined in the <<features-features-multiViewport,multiple viewports>> section of the spec but were not reflected in the valid usage text for these functions. * Add the +<<VK_EXT_swapchain_colorspace>>+ extension defining common color spaces.
2017-01-18 04:11:25 +00:00
\frac{\partial{s_{face}}}{\partial{x}} &=
\frac{\partial}{\partial{x}} \left ( \frac{1}{2} \times \frac{s_{c}}{|r_{c}|}
+ \frac{1}{2}\right ) \\
\frac{\partial{s_{face}}}{\partial{x}} &=
\frac{1}{2} \times \frac{\partial}{\partial{x}}
\left ( \frac{s_{c}}{|r_{c}|} \right ) \\
\frac{\partial{s_{face}}}{\partial{x}} &=
\frac{1}{2} \times
\left (
\frac{
|r_{c}| \times \partial{s_c}/\partial{x}
-s_c \times {\partial{r_{c}}}/{\partial{x}}}
{\left ( r_{c} \right )^2}
\right )
Change log for February 10, 2017 Vulkan 1.0.40 spec update: * Bump API patch number and header version number to 40 for this update. * There is a major build change in this release. We are now using the Ruby-based ``asciidoctor'' implementation, rather than the Python-based ``asciidoc'' implementation, to process the specification. While the actual specification markup changes were minimal, this requires a new set of build tools and a very different installation process, especially because we now use an experimental direct-to-PDF backend for Asciidoctor instead of Docbook->dblatex->PDF. It is no longer possible to build the Specification using asciidoc. See doc/specs/vulkan/README.adoc for some guidance on installing the new toolchain components. * There are some minor rendering issues in the PDF output due to teething problems with the asciidoctor toolchain, especially with mathematical equations. We are aware of these and working on them. Github Issues: * Updated sample code for the <<sparsememory-examples-basic,sparse resource binding example>> (public issue 97). * Modify line and point clipping behavior in the <<vertexpostproc-clipping, Primitive Clipping>> section to allow for pop-free behavior. The ability to check for which behavior is implemented may be added a future feature or extension (public issue 113). * Unify the discussions of implicit ordering throughout the spec, in particular in the new sections <<drawing-primitive-order, Primitive Order>>, <<primrast-order, Rasterization Order>>, and <<synchronization-implicit, Implicit Synchronization Guarantees>>; the discussion of <<synchronization-submission-order, submission order>>; and references elsewhere to these sections (public issue 133). * Clarify \<\<descriptorsets-compatibility,Pipeline Layout Compatibility>> language and introduce the term ``identically defined'' (public issue 164). * Add a dependency to the +VK_EXT_debug_marker+ extension that's needed to reuse the object type enum from +VK_EXT_debug_report+, and moves the definition of that enum into +VK_EXT_debug_report+ where it should be (public issue 409). * Remove redundant valid usage statement from slink:VkImageBlit (public issue 421). * Update GL_KHR_vulkan_glsl to allow the ternary operator to result in a specialization constant (public issue 424). * Fix valid usage for flink:VkPipelineShaderStageCreateInfo (public issue 426). * Correct typo in New Objects list for <<VK_EXT_debug_report>> (public issue 447). Internal Issues: * Moved to asciidoctor for spec builds (internal issue 121). * Update style guide to describe where to put new extensions-specific asciidoc files, and what to name them (internal issue 626). * Add src/spec/indexExt.py to autogenerate registry index entries linking into the 1.0-extensions specification, instead of maintaining the index manually. (internal issue 642). * Autogenerate extension dependencies and lists of all extensions and all KHR extensions from the "supported" attributes in +vk.xml+. Execute +make config/extDependency.sh+ from +doc/specs/vulkan+ when a supported extension is added to vk.xml, to regenerate the dependency script. The consequence is that specifying a single extension to the +makeExt+ script will automatically enable all extensions it depends on as well, and that the +makeAllExts+ and +makeKHR+ scripts do not need to be updated when a new extension is supported (internal issue 648). * Put extension appendices all at the same asciidoc section level, so KHR WSI extensions show up in the HTML index (internal issue 648). Other Issues: * Imbed images in the generated HTML specs instead of loading them from the images/ directory. * Fix missing EXT in extension name (ename:VK_EXT_SWAPCHAIN_COLOR_SPACE_EXTENSION_NAME). * Add new +VK_EXT_SMPTE_2086_metadata+ extension. * In the <<platformCreateSurface_xlib,Xlib Surface>> section of the +VK_KHR_xlib_surface+ specification, add language warning users that they always need to call code:XinitThreads. * Use the term "presentable image" (rather than "swapchain image") consistently in +VK_KHR_swapchain+ and related extensions, and add a glossary term defining it. * Relocate the valid usage for samples of flink:vkGetPhysicalDeviceSparseImageFormatProperties2KHR::pname:pFormatInfo to be below the flink:VkPhysicalDeviceSparseImageFormatInfo2KHR structure.
2017-02-11 04:37:39 +00:00
\end{aligned}
Change log for January 23, 2017 Vulkan 1.0.39 spec update: * Bump API patch number and header version number to 39 for this update. Github Issues: * Clarified that only accesses via the specified buffer/image subresource ranges are included in the access scopes (public issue 306). * Add missing valid usage statements for flink:vkCreateComputePipelines and flink:vkCreateGraphicsPipelines (public issue 427). Internal Issues: * Add a Note to the <<invariance,Invariance>> appendix about a difference between OpenGL and Vulkan with regards to how primitives derived from offsets are handled (internal issue 355). * Add the +<<VK_KHR_get_physical_device_properties2>>+, +<<VK_KHR_maintenance1>>+, and +<<VK_KHR_shader_draw_parameters>>+ extensions (internal issue 448). * Add the +<<VK_EXT_shader_subgroup_vote>>+ and +<<VK_EXT_shader_subgroup_ballot>>+ extensions (internal issue 449). * Update the texture level-of-detail equation in the <<textures-scale-factor,Scale Factor Operation>> section to better approximate the ellipse major and minor axes (internal issue 547). * Forbid non-explicitly allowed uses of interface decorations in the introduction to the <<interfaces,Shader Interfaces>> chapter (internal issue 607). * Replace use of MathJax with KaTeX, for improved load-time performance as well as avoiding the scrolling-and-scrolling behavior due to MathJax asynchronous rendering when loading at an anchor inside the spec. This change also requires moving to HTML5 output for the spec instead of XHTML, and there is a visible difference in that the chapter navigation index is now in a scrollable sidebar instead of at the top of the document. We may or may not retain the nav sidebar based on feedback (internal issue 613). * Improve consistency of markup and formatting in extension appendices (internal issue 631). Other Issues: * Add explicit valid usage statements to slink:VkImageCopy requiring that the source and destination layer ranges be contained in their respective source and destination images. * Add valid usage language for swapchain of flink:vkAcquireNextImage. If the swapchain has been replaced, then it should not be passed to flink:vkAcquireNextImage. * Add a valid usage statement to flink:vkCreateImageView, that the image must have been created with an appropriate usage bit set. * Noted that slink:VkDisplayPresentInfoKHR is a valid extension of slink:VkPresentInfoKHR in the <<wsi_swapchain,WSI Swapchain>> section. * Update valid usage for flink:vkCmdSetViewport and flink:vkCmdSetScissor to account for the multiple viewport feature. If the feature is not enabled, the parameters for these functions have required values that are defined in the <<features-features-multiViewport,multiple viewports>> section of the spec but were not reflected in the valid usage text for these functions. * Add the +<<VK_EXT_swapchain_colorspace>>+ extension defining common color spaces.
2017-01-18 04:11:25 +00:00
++++++++++++++++++++++++
=== latexmath block 35
[latexmath]
++++++++++++++++++++++++
Change log for February 10, 2017 Vulkan 1.0.40 spec update: * Bump API patch number and header version number to 40 for this update. * There is a major build change in this release. We are now using the Ruby-based ``asciidoctor'' implementation, rather than the Python-based ``asciidoc'' implementation, to process the specification. While the actual specification markup changes were minimal, this requires a new set of build tools and a very different installation process, especially because we now use an experimental direct-to-PDF backend for Asciidoctor instead of Docbook->dblatex->PDF. It is no longer possible to build the Specification using asciidoc. See doc/specs/vulkan/README.adoc for some guidance on installing the new toolchain components. * There are some minor rendering issues in the PDF output due to teething problems with the asciidoctor toolchain, especially with mathematical equations. We are aware of these and working on them. Github Issues: * Updated sample code for the <<sparsememory-examples-basic,sparse resource binding example>> (public issue 97). * Modify line and point clipping behavior in the <<vertexpostproc-clipping, Primitive Clipping>> section to allow for pop-free behavior. The ability to check for which behavior is implemented may be added a future feature or extension (public issue 113). * Unify the discussions of implicit ordering throughout the spec, in particular in the new sections <<drawing-primitive-order, Primitive Order>>, <<primrast-order, Rasterization Order>>, and <<synchronization-implicit, Implicit Synchronization Guarantees>>; the discussion of <<synchronization-submission-order, submission order>>; and references elsewhere to these sections (public issue 133). * Clarify \<\<descriptorsets-compatibility,Pipeline Layout Compatibility>> language and introduce the term ``identically defined'' (public issue 164). * Add a dependency to the +VK_EXT_debug_marker+ extension that's needed to reuse the object type enum from +VK_EXT_debug_report+, and moves the definition of that enum into +VK_EXT_debug_report+ where it should be (public issue 409). * Remove redundant valid usage statement from slink:VkImageBlit (public issue 421). * Update GL_KHR_vulkan_glsl to allow the ternary operator to result in a specialization constant (public issue 424). * Fix valid usage for flink:VkPipelineShaderStageCreateInfo (public issue 426). * Correct typo in New Objects list for <<VK_EXT_debug_report>> (public issue 447). Internal Issues: * Moved to asciidoctor for spec builds (internal issue 121). * Update style guide to describe where to put new extensions-specific asciidoc files, and what to name them (internal issue 626). * Add src/spec/indexExt.py to autogenerate registry index entries linking into the 1.0-extensions specification, instead of maintaining the index manually. (internal issue 642). * Autogenerate extension dependencies and lists of all extensions and all KHR extensions from the "supported" attributes in +vk.xml+. Execute +make config/extDependency.sh+ from +doc/specs/vulkan+ when a supported extension is added to vk.xml, to regenerate the dependency script. The consequence is that specifying a single extension to the +makeExt+ script will automatically enable all extensions it depends on as well, and that the +makeAllExts+ and +makeKHR+ scripts do not need to be updated when a new extension is supported (internal issue 648). * Put extension appendices all at the same asciidoc section level, so KHR WSI extensions show up in the HTML index (internal issue 648). Other Issues: * Imbed images in the generated HTML specs instead of loading them from the images/ directory. * Fix missing EXT in extension name (ename:VK_EXT_SWAPCHAIN_COLOR_SPACE_EXTENSION_NAME). * Add new +VK_EXT_SMPTE_2086_metadata+ extension. * In the <<platformCreateSurface_xlib,Xlib Surface>> section of the +VK_KHR_xlib_surface+ specification, add language warning users that they always need to call code:XinitThreads. * Use the term "presentable image" (rather than "swapchain image") consistently in +VK_KHR_swapchain+ and related extensions, and add a glossary term defining it. * Relocate the valid usage for samples of flink:vkGetPhysicalDeviceSparseImageFormatProperties2KHR::pname:pFormatInfo to be below the flink:VkPhysicalDeviceSparseImageFormatInfo2KHR structure.
2017-02-11 04:37:39 +00:00
\begin{aligned}
Change log for January 23, 2017 Vulkan 1.0.39 spec update: * Bump API patch number and header version number to 39 for this update. Github Issues: * Clarified that only accesses via the specified buffer/image subresource ranges are included in the access scopes (public issue 306). * Add missing valid usage statements for flink:vkCreateComputePipelines and flink:vkCreateGraphicsPipelines (public issue 427). Internal Issues: * Add a Note to the <<invariance,Invariance>> appendix about a difference between OpenGL and Vulkan with regards to how primitives derived from offsets are handled (internal issue 355). * Add the +<<VK_KHR_get_physical_device_properties2>>+, +<<VK_KHR_maintenance1>>+, and +<<VK_KHR_shader_draw_parameters>>+ extensions (internal issue 448). * Add the +<<VK_EXT_shader_subgroup_vote>>+ and +<<VK_EXT_shader_subgroup_ballot>>+ extensions (internal issue 449). * Update the texture level-of-detail equation in the <<textures-scale-factor,Scale Factor Operation>> section to better approximate the ellipse major and minor axes (internal issue 547). * Forbid non-explicitly allowed uses of interface decorations in the introduction to the <<interfaces,Shader Interfaces>> chapter (internal issue 607). * Replace use of MathJax with KaTeX, for improved load-time performance as well as avoiding the scrolling-and-scrolling behavior due to MathJax asynchronous rendering when loading at an anchor inside the spec. This change also requires moving to HTML5 output for the spec instead of XHTML, and there is a visible difference in that the chapter navigation index is now in a scrollable sidebar instead of at the top of the document. We may or may not retain the nav sidebar based on feedback (internal issue 613). * Improve consistency of markup and formatting in extension appendices (internal issue 631). Other Issues: * Add explicit valid usage statements to slink:VkImageCopy requiring that the source and destination layer ranges be contained in their respective source and destination images. * Add valid usage language for swapchain of flink:vkAcquireNextImage. If the swapchain has been replaced, then it should not be passed to flink:vkAcquireNextImage. * Add a valid usage statement to flink:vkCreateImageView, that the image must have been created with an appropriate usage bit set. * Noted that slink:VkDisplayPresentInfoKHR is a valid extension of slink:VkPresentInfoKHR in the <<wsi_swapchain,WSI Swapchain>> section. * Update valid usage for flink:vkCmdSetViewport and flink:vkCmdSetScissor to account for the multiple viewport feature. If the feature is not enabled, the parameters for these functions have required values that are defined in the <<features-features-multiViewport,multiple viewports>> section of the spec but were not reflected in the valid usage text for these functions. * Add the +<<VK_EXT_swapchain_colorspace>>+ extension defining common color spaces.
2017-01-18 04:11:25 +00:00
\frac{\partial{s_{face}}}{\partial{y}} &=
\frac{1}{2} \times
\left (
\frac{
|r_{c}| \times \partial{s_c}/\partial{y}
-s_c \times {\partial{r_{c}}}/{\partial{y}}}
{\left ( r_{c} \right )^2}
\right )\\
\frac{\partial{t_{face}}}{\partial{x}} &=
\frac{1}{2} \times
\left (
\frac{
|r_{c}| \times \partial{t_c}/\partial{x}
-t_c \times {\partial{r_{c}}}/{\partial{x}}}
{\left ( r_{c} \right )^2}
\right ) \\
\frac{\partial{t_{face}}}{\partial{y}} &=
\frac{1}{2} \times
\left (
\frac{
|r_{c}| \times \partial{t_c}/\partial{y}
-t_c \times {\partial{r_{c}}}/{\partial{y}}}
{\left ( r_{c} \right )^2}
\right )
Change log for February 10, 2017 Vulkan 1.0.40 spec update: * Bump API patch number and header version number to 40 for this update. * There is a major build change in this release. We are now using the Ruby-based ``asciidoctor'' implementation, rather than the Python-based ``asciidoc'' implementation, to process the specification. While the actual specification markup changes were minimal, this requires a new set of build tools and a very different installation process, especially because we now use an experimental direct-to-PDF backend for Asciidoctor instead of Docbook->dblatex->PDF. It is no longer possible to build the Specification using asciidoc. See doc/specs/vulkan/README.adoc for some guidance on installing the new toolchain components. * There are some minor rendering issues in the PDF output due to teething problems with the asciidoctor toolchain, especially with mathematical equations. We are aware of these and working on them. Github Issues: * Updated sample code for the <<sparsememory-examples-basic,sparse resource binding example>> (public issue 97). * Modify line and point clipping behavior in the <<vertexpostproc-clipping, Primitive Clipping>> section to allow for pop-free behavior. The ability to check for which behavior is implemented may be added a future feature or extension (public issue 113). * Unify the discussions of implicit ordering throughout the spec, in particular in the new sections <<drawing-primitive-order, Primitive Order>>, <<primrast-order, Rasterization Order>>, and <<synchronization-implicit, Implicit Synchronization Guarantees>>; the discussion of <<synchronization-submission-order, submission order>>; and references elsewhere to these sections (public issue 133). * Clarify \<\<descriptorsets-compatibility,Pipeline Layout Compatibility>> language and introduce the term ``identically defined'' (public issue 164). * Add a dependency to the +VK_EXT_debug_marker+ extension that's needed to reuse the object type enum from +VK_EXT_debug_report+, and moves the definition of that enum into +VK_EXT_debug_report+ where it should be (public issue 409). * Remove redundant valid usage statement from slink:VkImageBlit (public issue 421). * Update GL_KHR_vulkan_glsl to allow the ternary operator to result in a specialization constant (public issue 424). * Fix valid usage for flink:VkPipelineShaderStageCreateInfo (public issue 426). * Correct typo in New Objects list for <<VK_EXT_debug_report>> (public issue 447). Internal Issues: * Moved to asciidoctor for spec builds (internal issue 121). * Update style guide to describe where to put new extensions-specific asciidoc files, and what to name them (internal issue 626). * Add src/spec/indexExt.py to autogenerate registry index entries linking into the 1.0-extensions specification, instead of maintaining the index manually. (internal issue 642). * Autogenerate extension dependencies and lists of all extensions and all KHR extensions from the "supported" attributes in +vk.xml+. Execute +make config/extDependency.sh+ from +doc/specs/vulkan+ when a supported extension is added to vk.xml, to regenerate the dependency script. The consequence is that specifying a single extension to the +makeExt+ script will automatically enable all extensions it depends on as well, and that the +makeAllExts+ and +makeKHR+ scripts do not need to be updated when a new extension is supported (internal issue 648). * Put extension appendices all at the same asciidoc section level, so KHR WSI extensions show up in the HTML index (internal issue 648). Other Issues: * Imbed images in the generated HTML specs instead of loading them from the images/ directory. * Fix missing EXT in extension name (ename:VK_EXT_SWAPCHAIN_COLOR_SPACE_EXTENSION_NAME). * Add new +VK_EXT_SMPTE_2086_metadata+ extension. * In the <<platformCreateSurface_xlib,Xlib Surface>> section of the +VK_KHR_xlib_surface+ specification, add language warning users that they always need to call code:XinitThreads. * Use the term "presentable image" (rather than "swapchain image") consistently in +VK_KHR_swapchain+ and related extensions, and add a glossary term defining it. * Relocate the valid usage for samples of flink:vkGetPhysicalDeviceSparseImageFormatProperties2KHR::pname:pFormatInfo to be below the flink:VkPhysicalDeviceSparseImageFormatInfo2KHR structure.
2017-02-11 04:37:39 +00:00
\end{aligned}
Change log for January 23, 2017 Vulkan 1.0.39 spec update: * Bump API patch number and header version number to 39 for this update. Github Issues: * Clarified that only accesses via the specified buffer/image subresource ranges are included in the access scopes (public issue 306). * Add missing valid usage statements for flink:vkCreateComputePipelines and flink:vkCreateGraphicsPipelines (public issue 427). Internal Issues: * Add a Note to the <<invariance,Invariance>> appendix about a difference between OpenGL and Vulkan with regards to how primitives derived from offsets are handled (internal issue 355). * Add the +<<VK_KHR_get_physical_device_properties2>>+, +<<VK_KHR_maintenance1>>+, and +<<VK_KHR_shader_draw_parameters>>+ extensions (internal issue 448). * Add the +<<VK_EXT_shader_subgroup_vote>>+ and +<<VK_EXT_shader_subgroup_ballot>>+ extensions (internal issue 449). * Update the texture level-of-detail equation in the <<textures-scale-factor,Scale Factor Operation>> section to better approximate the ellipse major and minor axes (internal issue 547). * Forbid non-explicitly allowed uses of interface decorations in the introduction to the <<interfaces,Shader Interfaces>> chapter (internal issue 607). * Replace use of MathJax with KaTeX, for improved load-time performance as well as avoiding the scrolling-and-scrolling behavior due to MathJax asynchronous rendering when loading at an anchor inside the spec. This change also requires moving to HTML5 output for the spec instead of XHTML, and there is a visible difference in that the chapter navigation index is now in a scrollable sidebar instead of at the top of the document. We may or may not retain the nav sidebar based on feedback (internal issue 613). * Improve consistency of markup and formatting in extension appendices (internal issue 631). Other Issues: * Add explicit valid usage statements to slink:VkImageCopy requiring that the source and destination layer ranges be contained in their respective source and destination images. * Add valid usage language for swapchain of flink:vkAcquireNextImage. If the swapchain has been replaced, then it should not be passed to flink:vkAcquireNextImage. * Add a valid usage statement to flink:vkCreateImageView, that the image must have been created with an appropriate usage bit set. * Noted that slink:VkDisplayPresentInfoKHR is a valid extension of slink:VkPresentInfoKHR in the <<wsi_swapchain,WSI Swapchain>> section. * Update valid usage for flink:vkCmdSetViewport and flink:vkCmdSetScissor to account for the multiple viewport feature. If the feature is not enabled, the parameters for these functions have required values that are defined in the <<features-features-multiViewport,multiple viewports>> section of the spec but were not reflected in the valid usage text for these functions. * Add the +<<VK_EXT_swapchain_colorspace>>+ extension defining common color spaces.
2017-01-18 04:11:25 +00:00
++++++++++++++++++++++++
=== latexmath block 36
[latexmath]
++++++++++++++++++++++++
Change log for February 10, 2017 Vulkan 1.0.40 spec update: * Bump API patch number and header version number to 40 for this update. * There is a major build change in this release. We are now using the Ruby-based ``asciidoctor'' implementation, rather than the Python-based ``asciidoc'' implementation, to process the specification. While the actual specification markup changes were minimal, this requires a new set of build tools and a very different installation process, especially because we now use an experimental direct-to-PDF backend for Asciidoctor instead of Docbook->dblatex->PDF. It is no longer possible to build the Specification using asciidoc. See doc/specs/vulkan/README.adoc for some guidance on installing the new toolchain components. * There are some minor rendering issues in the PDF output due to teething problems with the asciidoctor toolchain, especially with mathematical equations. We are aware of these and working on them. Github Issues: * Updated sample code for the <<sparsememory-examples-basic,sparse resource binding example>> (public issue 97). * Modify line and point clipping behavior in the <<vertexpostproc-clipping, Primitive Clipping>> section to allow for pop-free behavior. The ability to check for which behavior is implemented may be added a future feature or extension (public issue 113). * Unify the discussions of implicit ordering throughout the spec, in particular in the new sections <<drawing-primitive-order, Primitive Order>>, <<primrast-order, Rasterization Order>>, and <<synchronization-implicit, Implicit Synchronization Guarantees>>; the discussion of <<synchronization-submission-order, submission order>>; and references elsewhere to these sections (public issue 133). * Clarify \<\<descriptorsets-compatibility,Pipeline Layout Compatibility>> language and introduce the term ``identically defined'' (public issue 164). * Add a dependency to the +VK_EXT_debug_marker+ extension that's needed to reuse the object type enum from +VK_EXT_debug_report+, and moves the definition of that enum into +VK_EXT_debug_report+ where it should be (public issue 409). * Remove redundant valid usage statement from slink:VkImageBlit (public issue 421). * Update GL_KHR_vulkan_glsl to allow the ternary operator to result in a specialization constant (public issue 424). * Fix valid usage for flink:VkPipelineShaderStageCreateInfo (public issue 426). * Correct typo in New Objects list for <<VK_EXT_debug_report>> (public issue 447). Internal Issues: * Moved to asciidoctor for spec builds (internal issue 121). * Update style guide to describe where to put new extensions-specific asciidoc files, and what to name them (internal issue 626). * Add src/spec/indexExt.py to autogenerate registry index entries linking into the 1.0-extensions specification, instead of maintaining the index manually. (internal issue 642). * Autogenerate extension dependencies and lists of all extensions and all KHR extensions from the "supported" attributes in +vk.xml+. Execute +make config/extDependency.sh+ from +doc/specs/vulkan+ when a supported extension is added to vk.xml, to regenerate the dependency script. The consequence is that specifying a single extension to the +makeExt+ script will automatically enable all extensions it depends on as well, and that the +makeAllExts+ and +makeKHR+ scripts do not need to be updated when a new extension is supported (internal issue 648). * Put extension appendices all at the same asciidoc section level, so KHR WSI extensions show up in the HTML index (internal issue 648). Other Issues: * Imbed images in the generated HTML specs instead of loading them from the images/ directory. * Fix missing EXT in extension name (ename:VK_EXT_SWAPCHAIN_COLOR_SPACE_EXTENSION_NAME). * Add new +VK_EXT_SMPTE_2086_metadata+ extension. * In the <<platformCreateSurface_xlib,Xlib Surface>> section of the +VK_KHR_xlib_surface+ specification, add language warning users that they always need to call code:XinitThreads. * Use the term "presentable image" (rather than "swapchain image") consistently in +VK_KHR_swapchain+ and related extensions, and add a glossary term defining it. * Relocate the valid usage for samples of flink:vkGetPhysicalDeviceSparseImageFormatProperties2KHR::pname:pFormatInfo to be below the flink:VkPhysicalDeviceSparseImageFormatInfo2KHR structure.
2017-02-11 04:37:39 +00:00
\begin{aligned}
Change log for January 23, 2017 Vulkan 1.0.39 spec update: * Bump API patch number and header version number to 39 for this update. Github Issues: * Clarified that only accesses via the specified buffer/image subresource ranges are included in the access scopes (public issue 306). * Add missing valid usage statements for flink:vkCreateComputePipelines and flink:vkCreateGraphicsPipelines (public issue 427). Internal Issues: * Add a Note to the <<invariance,Invariance>> appendix about a difference between OpenGL and Vulkan with regards to how primitives derived from offsets are handled (internal issue 355). * Add the +<<VK_KHR_get_physical_device_properties2>>+, +<<VK_KHR_maintenance1>>+, and +<<VK_KHR_shader_draw_parameters>>+ extensions (internal issue 448). * Add the +<<VK_EXT_shader_subgroup_vote>>+ and +<<VK_EXT_shader_subgroup_ballot>>+ extensions (internal issue 449). * Update the texture level-of-detail equation in the <<textures-scale-factor,Scale Factor Operation>> section to better approximate the ellipse major and minor axes (internal issue 547). * Forbid non-explicitly allowed uses of interface decorations in the introduction to the <<interfaces,Shader Interfaces>> chapter (internal issue 607). * Replace use of MathJax with KaTeX, for improved load-time performance as well as avoiding the scrolling-and-scrolling behavior due to MathJax asynchronous rendering when loading at an anchor inside the spec. This change also requires moving to HTML5 output for the spec instead of XHTML, and there is a visible difference in that the chapter navigation index is now in a scrollable sidebar instead of at the top of the document. We may or may not retain the nav sidebar based on feedback (internal issue 613). * Improve consistency of markup and formatting in extension appendices (internal issue 631). Other Issues: * Add explicit valid usage statements to slink:VkImageCopy requiring that the source and destination layer ranges be contained in their respective source and destination images. * Add valid usage language for swapchain of flink:vkAcquireNextImage. If the swapchain has been replaced, then it should not be passed to flink:vkAcquireNextImage. * Add a valid usage statement to flink:vkCreateImageView, that the image must have been created with an appropriate usage bit set. * Noted that slink:VkDisplayPresentInfoKHR is a valid extension of slink:VkPresentInfoKHR in the <<wsi_swapchain,WSI Swapchain>> section. * Update valid usage for flink:vkCmdSetViewport and flink:vkCmdSetScissor to account for the multiple viewport feature. If the feature is not enabled, the parameters for these functions have required values that are defined in the <<features-features-multiViewport,multiple viewports>> section of the spec but were not reflected in the valid usage text for these functions. * Add the +<<VK_EXT_swapchain_colorspace>>+ extension defining common color spaces.
2017-01-18 04:11:25 +00:00
\rho_{x} & = \sqrt{ m_{ux} ^{2} + m_{vx} ^{2} + m_{wx} ^{2} } \\
\rho_{y} & = \sqrt{ m_{uy} ^{2} + m_{vy} ^{2} + m_{wy} ^{2} }
Change log for February 10, 2017 Vulkan 1.0.40 spec update: * Bump API patch number and header version number to 40 for this update. * There is a major build change in this release. We are now using the Ruby-based ``asciidoctor'' implementation, rather than the Python-based ``asciidoc'' implementation, to process the specification. While the actual specification markup changes were minimal, this requires a new set of build tools and a very different installation process, especially because we now use an experimental direct-to-PDF backend for Asciidoctor instead of Docbook->dblatex->PDF. It is no longer possible to build the Specification using asciidoc. See doc/specs/vulkan/README.adoc for some guidance on installing the new toolchain components. * There are some minor rendering issues in the PDF output due to teething problems with the asciidoctor toolchain, especially with mathematical equations. We are aware of these and working on them. Github Issues: * Updated sample code for the <<sparsememory-examples-basic,sparse resource binding example>> (public issue 97). * Modify line and point clipping behavior in the <<vertexpostproc-clipping, Primitive Clipping>> section to allow for pop-free behavior. The ability to check for which behavior is implemented may be added a future feature or extension (public issue 113). * Unify the discussions of implicit ordering throughout the spec, in particular in the new sections <<drawing-primitive-order, Primitive Order>>, <<primrast-order, Rasterization Order>>, and <<synchronization-implicit, Implicit Synchronization Guarantees>>; the discussion of <<synchronization-submission-order, submission order>>; and references elsewhere to these sections (public issue 133). * Clarify \<\<descriptorsets-compatibility,Pipeline Layout Compatibility>> language and introduce the term ``identically defined'' (public issue 164). * Add a dependency to the +VK_EXT_debug_marker+ extension that's needed to reuse the object type enum from +VK_EXT_debug_report+, and moves the definition of that enum into +VK_EXT_debug_report+ where it should be (public issue 409). * Remove redundant valid usage statement from slink:VkImageBlit (public issue 421). * Update GL_KHR_vulkan_glsl to allow the ternary operator to result in a specialization constant (public issue 424). * Fix valid usage for flink:VkPipelineShaderStageCreateInfo (public issue 426). * Correct typo in New Objects list for <<VK_EXT_debug_report>> (public issue 447). Internal Issues: * Moved to asciidoctor for spec builds (internal issue 121). * Update style guide to describe where to put new extensions-specific asciidoc files, and what to name them (internal issue 626). * Add src/spec/indexExt.py to autogenerate registry index entries linking into the 1.0-extensions specification, instead of maintaining the index manually. (internal issue 642). * Autogenerate extension dependencies and lists of all extensions and all KHR extensions from the "supported" attributes in +vk.xml+. Execute +make config/extDependency.sh+ from +doc/specs/vulkan+ when a supported extension is added to vk.xml, to regenerate the dependency script. The consequence is that specifying a single extension to the +makeExt+ script will automatically enable all extensions it depends on as well, and that the +makeAllExts+ and +makeKHR+ scripts do not need to be updated when a new extension is supported (internal issue 648). * Put extension appendices all at the same asciidoc section level, so KHR WSI extensions show up in the HTML index (internal issue 648). Other Issues: * Imbed images in the generated HTML specs instead of loading them from the images/ directory. * Fix missing EXT in extension name (ename:VK_EXT_SWAPCHAIN_COLOR_SPACE_EXTENSION_NAME). * Add new +VK_EXT_SMPTE_2086_metadata+ extension. * In the <<platformCreateSurface_xlib,Xlib Surface>> section of the +VK_KHR_xlib_surface+ specification, add language warning users that they always need to call code:XinitThreads. * Use the term "presentable image" (rather than "swapchain image") consistently in +VK_KHR_swapchain+ and related extensions, and add a glossary term defining it. * Relocate the valid usage for samples of flink:vkGetPhysicalDeviceSparseImageFormatProperties2KHR::pname:pFormatInfo to be below the flink:VkPhysicalDeviceSparseImageFormatInfo2KHR structure.
2017-02-11 04:37:39 +00:00
\end{aligned}
Change log for January 23, 2017 Vulkan 1.0.39 spec update: * Bump API patch number and header version number to 39 for this update. Github Issues: * Clarified that only accesses via the specified buffer/image subresource ranges are included in the access scopes (public issue 306). * Add missing valid usage statements for flink:vkCreateComputePipelines and flink:vkCreateGraphicsPipelines (public issue 427). Internal Issues: * Add a Note to the <<invariance,Invariance>> appendix about a difference between OpenGL and Vulkan with regards to how primitives derived from offsets are handled (internal issue 355). * Add the +<<VK_KHR_get_physical_device_properties2>>+, +<<VK_KHR_maintenance1>>+, and +<<VK_KHR_shader_draw_parameters>>+ extensions (internal issue 448). * Add the +<<VK_EXT_shader_subgroup_vote>>+ and +<<VK_EXT_shader_subgroup_ballot>>+ extensions (internal issue 449). * Update the texture level-of-detail equation in the <<textures-scale-factor,Scale Factor Operation>> section to better approximate the ellipse major and minor axes (internal issue 547). * Forbid non-explicitly allowed uses of interface decorations in the introduction to the <<interfaces,Shader Interfaces>> chapter (internal issue 607). * Replace use of MathJax with KaTeX, for improved load-time performance as well as avoiding the scrolling-and-scrolling behavior due to MathJax asynchronous rendering when loading at an anchor inside the spec. This change also requires moving to HTML5 output for the spec instead of XHTML, and there is a visible difference in that the chapter navigation index is now in a scrollable sidebar instead of at the top of the document. We may or may not retain the nav sidebar based on feedback (internal issue 613). * Improve consistency of markup and formatting in extension appendices (internal issue 631). Other Issues: * Add explicit valid usage statements to slink:VkImageCopy requiring that the source and destination layer ranges be contained in their respective source and destination images. * Add valid usage language for swapchain of flink:vkAcquireNextImage. If the swapchain has been replaced, then it should not be passed to flink:vkAcquireNextImage. * Add a valid usage statement to flink:vkCreateImageView, that the image must have been created with an appropriate usage bit set. * Noted that slink:VkDisplayPresentInfoKHR is a valid extension of slink:VkPresentInfoKHR in the <<wsi_swapchain,WSI Swapchain>> section. * Update valid usage for flink:vkCmdSetViewport and flink:vkCmdSetScissor to account for the multiple viewport feature. If the feature is not enabled, the parameters for these functions have required values that are defined in the <<features-features-multiViewport,multiple viewports>> section of the spec but were not reflected in the valid usage text for these functions. * Add the +<<VK_EXT_swapchain_colorspace>>+ extension defining common color spaces.
2017-01-18 04:11:25 +00:00
++++++++++++++++++++++++
=== latexmath block 37
:: [eq]#f~x~# is continuous and monotonically increasing in each of
[eq]#m~ux~#, [eq]#m~vx~#, and [eq]#m~wx~#
:: [eq]#f~y~# is continuous and monotonically increasing in each of
[eq]#m~uy~#, [eq]#m~vy~#, and [eq]#m~wy~#
:: [eq]#max({vert}m~ux~{vert}, {vert}m~vx~{vert}, {vert}m~wx~{vert}) {leq}
f~x~ {leq} {vert}m~ux~{vert} + {vert}m~vx~{vert} + {vert}m~wx~{vert}#
:: [eq]#max({vert}m~uy~{vert}, {vert}m~vy~{vert}, {vert}m~wy~{vert}) {leq}
f~y~ {leq} {vert}m~uy~{vert} + {vert}m~vy~{vert} + {vert}m~wy~{vert}#
=== latexmath block 38
[latexmath]
++++++++++++++++++++++++
Change log for February 10, 2017 Vulkan 1.0.40 spec update: * Bump API patch number and header version number to 40 for this update. * There is a major build change in this release. We are now using the Ruby-based ``asciidoctor'' implementation, rather than the Python-based ``asciidoc'' implementation, to process the specification. While the actual specification markup changes were minimal, this requires a new set of build tools and a very different installation process, especially because we now use an experimental direct-to-PDF backend for Asciidoctor instead of Docbook->dblatex->PDF. It is no longer possible to build the Specification using asciidoc. See doc/specs/vulkan/README.adoc for some guidance on installing the new toolchain components. * There are some minor rendering issues in the PDF output due to teething problems with the asciidoctor toolchain, especially with mathematical equations. We are aware of these and working on them. Github Issues: * Updated sample code for the <<sparsememory-examples-basic,sparse resource binding example>> (public issue 97). * Modify line and point clipping behavior in the <<vertexpostproc-clipping, Primitive Clipping>> section to allow for pop-free behavior. The ability to check for which behavior is implemented may be added a future feature or extension (public issue 113). * Unify the discussions of implicit ordering throughout the spec, in particular in the new sections <<drawing-primitive-order, Primitive Order>>, <<primrast-order, Rasterization Order>>, and <<synchronization-implicit, Implicit Synchronization Guarantees>>; the discussion of <<synchronization-submission-order, submission order>>; and references elsewhere to these sections (public issue 133). * Clarify \<\<descriptorsets-compatibility,Pipeline Layout Compatibility>> language and introduce the term ``identically defined'' (public issue 164). * Add a dependency to the +VK_EXT_debug_marker+ extension that's needed to reuse the object type enum from +VK_EXT_debug_report+, and moves the definition of that enum into +VK_EXT_debug_report+ where it should be (public issue 409). * Remove redundant valid usage statement from slink:VkImageBlit (public issue 421). * Update GL_KHR_vulkan_glsl to allow the ternary operator to result in a specialization constant (public issue 424). * Fix valid usage for flink:VkPipelineShaderStageCreateInfo (public issue 426). * Correct typo in New Objects list for <<VK_EXT_debug_report>> (public issue 447). Internal Issues: * Moved to asciidoctor for spec builds (internal issue 121). * Update style guide to describe where to put new extensions-specific asciidoc files, and what to name them (internal issue 626). * Add src/spec/indexExt.py to autogenerate registry index entries linking into the 1.0-extensions specification, instead of maintaining the index manually. (internal issue 642). * Autogenerate extension dependencies and lists of all extensions and all KHR extensions from the "supported" attributes in +vk.xml+. Execute +make config/extDependency.sh+ from +doc/specs/vulkan+ when a supported extension is added to vk.xml, to regenerate the dependency script. The consequence is that specifying a single extension to the +makeExt+ script will automatically enable all extensions it depends on as well, and that the +makeAllExts+ and +makeKHR+ scripts do not need to be updated when a new extension is supported (internal issue 648). * Put extension appendices all at the same asciidoc section level, so KHR WSI extensions show up in the HTML index (internal issue 648). Other Issues: * Imbed images in the generated HTML specs instead of loading them from the images/ directory. * Fix missing EXT in extension name (ename:VK_EXT_SWAPCHAIN_COLOR_SPACE_EXTENSION_NAME). * Add new +VK_EXT_SMPTE_2086_metadata+ extension. * In the <<platformCreateSurface_xlib,Xlib Surface>> section of the +VK_KHR_xlib_surface+ specification, add language warning users that they always need to call code:XinitThreads. * Use the term "presentable image" (rather than "swapchain image") consistently in +VK_KHR_swapchain+ and related extensions, and add a glossary term defining it. * Relocate the valid usage for samples of flink:vkGetPhysicalDeviceSparseImageFormatProperties2KHR::pname:pFormatInfo to be below the flink:VkPhysicalDeviceSparseImageFormatInfo2KHR structure.
2017-02-11 04:37:39 +00:00
\begin{aligned}
Change log for January 23, 2017 Vulkan 1.0.39 spec update: * Bump API patch number and header version number to 39 for this update. Github Issues: * Clarified that only accesses via the specified buffer/image subresource ranges are included in the access scopes (public issue 306). * Add missing valid usage statements for flink:vkCreateComputePipelines and flink:vkCreateGraphicsPipelines (public issue 427). Internal Issues: * Add a Note to the <<invariance,Invariance>> appendix about a difference between OpenGL and Vulkan with regards to how primitives derived from offsets are handled (internal issue 355). * Add the +<<VK_KHR_get_physical_device_properties2>>+, +<<VK_KHR_maintenance1>>+, and +<<VK_KHR_shader_draw_parameters>>+ extensions (internal issue 448). * Add the +<<VK_EXT_shader_subgroup_vote>>+ and +<<VK_EXT_shader_subgroup_ballot>>+ extensions (internal issue 449). * Update the texture level-of-detail equation in the <<textures-scale-factor,Scale Factor Operation>> section to better approximate the ellipse major and minor axes (internal issue 547). * Forbid non-explicitly allowed uses of interface decorations in the introduction to the <<interfaces,Shader Interfaces>> chapter (internal issue 607). * Replace use of MathJax with KaTeX, for improved load-time performance as well as avoiding the scrolling-and-scrolling behavior due to MathJax asynchronous rendering when loading at an anchor inside the spec. This change also requires moving to HTML5 output for the spec instead of XHTML, and there is a visible difference in that the chapter navigation index is now in a scrollable sidebar instead of at the top of the document. We may or may not retain the nav sidebar based on feedback (internal issue 613). * Improve consistency of markup and formatting in extension appendices (internal issue 631). Other Issues: * Add explicit valid usage statements to slink:VkImageCopy requiring that the source and destination layer ranges be contained in their respective source and destination images. * Add valid usage language for swapchain of flink:vkAcquireNextImage. If the swapchain has been replaced, then it should not be passed to flink:vkAcquireNextImage. * Add a valid usage statement to flink:vkCreateImageView, that the image must have been created with an appropriate usage bit set. * Noted that slink:VkDisplayPresentInfoKHR is a valid extension of slink:VkPresentInfoKHR in the <<wsi_swapchain,WSI Swapchain>> section. * Update valid usage for flink:vkCmdSetViewport and flink:vkCmdSetScissor to account for the multiple viewport feature. If the feature is not enabled, the parameters for these functions have required values that are defined in the <<features-features-multiViewport,multiple viewports>> section of the spec but were not reflected in the valid usage text for these functions. * Add the +<<VK_EXT_swapchain_colorspace>>+ extension defining common color spaces.
2017-01-18 04:11:25 +00:00
N & = \min \left (\left \lceil \frac{\rho_{max}}{\rho_{min}} \right \rceil ,max_{Aniso} \right )
Change log for February 10, 2017 Vulkan 1.0.40 spec update: * Bump API patch number and header version number to 40 for this update. * There is a major build change in this release. We are now using the Ruby-based ``asciidoctor'' implementation, rather than the Python-based ``asciidoc'' implementation, to process the specification. While the actual specification markup changes were minimal, this requires a new set of build tools and a very different installation process, especially because we now use an experimental direct-to-PDF backend for Asciidoctor instead of Docbook->dblatex->PDF. It is no longer possible to build the Specification using asciidoc. See doc/specs/vulkan/README.adoc for some guidance on installing the new toolchain components. * There are some minor rendering issues in the PDF output due to teething problems with the asciidoctor toolchain, especially with mathematical equations. We are aware of these and working on them. Github Issues: * Updated sample code for the <<sparsememory-examples-basic,sparse resource binding example>> (public issue 97). * Modify line and point clipping behavior in the <<vertexpostproc-clipping, Primitive Clipping>> section to allow for pop-free behavior. The ability to check for which behavior is implemented may be added a future feature or extension (public issue 113). * Unify the discussions of implicit ordering throughout the spec, in particular in the new sections <<drawing-primitive-order, Primitive Order>>, <<primrast-order, Rasterization Order>>, and <<synchronization-implicit, Implicit Synchronization Guarantees>>; the discussion of <<synchronization-submission-order, submission order>>; and references elsewhere to these sections (public issue 133). * Clarify \<\<descriptorsets-compatibility,Pipeline Layout Compatibility>> language and introduce the term ``identically defined'' (public issue 164). * Add a dependency to the +VK_EXT_debug_marker+ extension that's needed to reuse the object type enum from +VK_EXT_debug_report+, and moves the definition of that enum into +VK_EXT_debug_report+ where it should be (public issue 409). * Remove redundant valid usage statement from slink:VkImageBlit (public issue 421). * Update GL_KHR_vulkan_glsl to allow the ternary operator to result in a specialization constant (public issue 424). * Fix valid usage for flink:VkPipelineShaderStageCreateInfo (public issue 426). * Correct typo in New Objects list for <<VK_EXT_debug_report>> (public issue 447). Internal Issues: * Moved to asciidoctor for spec builds (internal issue 121). * Update style guide to describe where to put new extensions-specific asciidoc files, and what to name them (internal issue 626). * Add src/spec/indexExt.py to autogenerate registry index entries linking into the 1.0-extensions specification, instead of maintaining the index manually. (internal issue 642). * Autogenerate extension dependencies and lists of all extensions and all KHR extensions from the "supported" attributes in +vk.xml+. Execute +make config/extDependency.sh+ from +doc/specs/vulkan+ when a supported extension is added to vk.xml, to regenerate the dependency script. The consequence is that specifying a single extension to the +makeExt+ script will automatically enable all extensions it depends on as well, and that the +makeAllExts+ and +makeKHR+ scripts do not need to be updated when a new extension is supported (internal issue 648). * Put extension appendices all at the same asciidoc section level, so KHR WSI extensions show up in the HTML index (internal issue 648). Other Issues: * Imbed images in the generated HTML specs instead of loading them from the images/ directory. * Fix missing EXT in extension name (ename:VK_EXT_SWAPCHAIN_COLOR_SPACE_EXTENSION_NAME). * Add new +VK_EXT_SMPTE_2086_metadata+ extension. * In the <<platformCreateSurface_xlib,Xlib Surface>> section of the +VK_KHR_xlib_surface+ specification, add language warning users that they always need to call code:XinitThreads. * Use the term "presentable image" (rather than "swapchain image") consistently in +VK_KHR_swapchain+ and related extensions, and add a glossary term defining it. * Relocate the valid usage for samples of flink:vkGetPhysicalDeviceSparseImageFormatProperties2KHR::pname:pFormatInfo to be below the flink:VkPhysicalDeviceSparseImageFormatInfo2KHR structure.
2017-02-11 04:37:39 +00:00
\end{aligned}
Change log for January 23, 2017 Vulkan 1.0.39 spec update: * Bump API patch number and header version number to 39 for this update. Github Issues: * Clarified that only accesses via the specified buffer/image subresource ranges are included in the access scopes (public issue 306). * Add missing valid usage statements for flink:vkCreateComputePipelines and flink:vkCreateGraphicsPipelines (public issue 427). Internal Issues: * Add a Note to the <<invariance,Invariance>> appendix about a difference between OpenGL and Vulkan with regards to how primitives derived from offsets are handled (internal issue 355). * Add the +<<VK_KHR_get_physical_device_properties2>>+, +<<VK_KHR_maintenance1>>+, and +<<VK_KHR_shader_draw_parameters>>+ extensions (internal issue 448). * Add the +<<VK_EXT_shader_subgroup_vote>>+ and +<<VK_EXT_shader_subgroup_ballot>>+ extensions (internal issue 449). * Update the texture level-of-detail equation in the <<textures-scale-factor,Scale Factor Operation>> section to better approximate the ellipse major and minor axes (internal issue 547). * Forbid non-explicitly allowed uses of interface decorations in the introduction to the <<interfaces,Shader Interfaces>> chapter (internal issue 607). * Replace use of MathJax with KaTeX, for improved load-time performance as well as avoiding the scrolling-and-scrolling behavior due to MathJax asynchronous rendering when loading at an anchor inside the spec. This change also requires moving to HTML5 output for the spec instead of XHTML, and there is a visible difference in that the chapter navigation index is now in a scrollable sidebar instead of at the top of the document. We may or may not retain the nav sidebar based on feedback (internal issue 613). * Improve consistency of markup and formatting in extension appendices (internal issue 631). Other Issues: * Add explicit valid usage statements to slink:VkImageCopy requiring that the source and destination layer ranges be contained in their respective source and destination images. * Add valid usage language for swapchain of flink:vkAcquireNextImage. If the swapchain has been replaced, then it should not be passed to flink:vkAcquireNextImage. * Add a valid usage statement to flink:vkCreateImageView, that the image must have been created with an appropriate usage bit set. * Noted that slink:VkDisplayPresentInfoKHR is a valid extension of slink:VkPresentInfoKHR in the <<wsi_swapchain,WSI Swapchain>> section. * Update valid usage for flink:vkCmdSetViewport and flink:vkCmdSetScissor to account for the multiple viewport feature. If the feature is not enabled, the parameters for these functions have required values that are defined in the <<features-features-multiViewport,multiple viewports>> section of the spec but were not reflected in the valid usage text for these functions. * Add the +<<VK_EXT_swapchain_colorspace>>+ extension defining common color spaces.
2017-01-18 04:11:25 +00:00
++++++++++++++++++++++++
=== latexmath block 39
[latexmath]
++++++++++++++++++++++++
Change log for February 10, 2017 Vulkan 1.0.40 spec update: * Bump API patch number and header version number to 40 for this update. * There is a major build change in this release. We are now using the Ruby-based ``asciidoctor'' implementation, rather than the Python-based ``asciidoc'' implementation, to process the specification. While the actual specification markup changes were minimal, this requires a new set of build tools and a very different installation process, especially because we now use an experimental direct-to-PDF backend for Asciidoctor instead of Docbook->dblatex->PDF. It is no longer possible to build the Specification using asciidoc. See doc/specs/vulkan/README.adoc for some guidance on installing the new toolchain components. * There are some minor rendering issues in the PDF output due to teething problems with the asciidoctor toolchain, especially with mathematical equations. We are aware of these and working on them. Github Issues: * Updated sample code for the <<sparsememory-examples-basic,sparse resource binding example>> (public issue 97). * Modify line and point clipping behavior in the <<vertexpostproc-clipping, Primitive Clipping>> section to allow for pop-free behavior. The ability to check for which behavior is implemented may be added a future feature or extension (public issue 113). * Unify the discussions of implicit ordering throughout the spec, in particular in the new sections <<drawing-primitive-order, Primitive Order>>, <<primrast-order, Rasterization Order>>, and <<synchronization-implicit, Implicit Synchronization Guarantees>>; the discussion of <<synchronization-submission-order, submission order>>; and references elsewhere to these sections (public issue 133). * Clarify \<\<descriptorsets-compatibility,Pipeline Layout Compatibility>> language and introduce the term ``identically defined'' (public issue 164). * Add a dependency to the +VK_EXT_debug_marker+ extension that's needed to reuse the object type enum from +VK_EXT_debug_report+, and moves the definition of that enum into +VK_EXT_debug_report+ where it should be (public issue 409). * Remove redundant valid usage statement from slink:VkImageBlit (public issue 421). * Update GL_KHR_vulkan_glsl to allow the ternary operator to result in a specialization constant (public issue 424). * Fix valid usage for flink:VkPipelineShaderStageCreateInfo (public issue 426). * Correct typo in New Objects list for <<VK_EXT_debug_report>> (public issue 447). Internal Issues: * Moved to asciidoctor for spec builds (internal issue 121). * Update style guide to describe where to put new extensions-specific asciidoc files, and what to name them (internal issue 626). * Add src/spec/indexExt.py to autogenerate registry index entries linking into the 1.0-extensions specification, instead of maintaining the index manually. (internal issue 642). * Autogenerate extension dependencies and lists of all extensions and all KHR extensions from the "supported" attributes in +vk.xml+. Execute +make config/extDependency.sh+ from +doc/specs/vulkan+ when a supported extension is added to vk.xml, to regenerate the dependency script. The consequence is that specifying a single extension to the +makeExt+ script will automatically enable all extensions it depends on as well, and that the +makeAllExts+ and +makeKHR+ scripts do not need to be updated when a new extension is supported (internal issue 648). * Put extension appendices all at the same asciidoc section level, so KHR WSI extensions show up in the HTML index (internal issue 648). Other Issues: * Imbed images in the generated HTML specs instead of loading them from the images/ directory. * Fix missing EXT in extension name (ename:VK_EXT_SWAPCHAIN_COLOR_SPACE_EXTENSION_NAME). * Add new +VK_EXT_SMPTE_2086_metadata+ extension. * In the <<platformCreateSurface_xlib,Xlib Surface>> section of the +VK_KHR_xlib_surface+ specification, add language warning users that they always need to call code:XinitThreads. * Use the term "presentable image" (rather than "swapchain image") consistently in +VK_KHR_swapchain+ and related extensions, and add a glossary term defining it. * Relocate the valid usage for samples of flink:vkGetPhysicalDeviceSparseImageFormatProperties2KHR::pname:pFormatInfo to be below the flink:VkPhysicalDeviceSparseImageFormatInfo2KHR structure.
2017-02-11 04:37:39 +00:00
\begin{aligned}
Change log for January 23, 2017 Vulkan 1.0.39 spec update: * Bump API patch number and header version number to 39 for this update. Github Issues: * Clarified that only accesses via the specified buffer/image subresource ranges are included in the access scopes (public issue 306). * Add missing valid usage statements for flink:vkCreateComputePipelines and flink:vkCreateGraphicsPipelines (public issue 427). Internal Issues: * Add a Note to the <<invariance,Invariance>> appendix about a difference between OpenGL and Vulkan with regards to how primitives derived from offsets are handled (internal issue 355). * Add the +<<VK_KHR_get_physical_device_properties2>>+, +<<VK_KHR_maintenance1>>+, and +<<VK_KHR_shader_draw_parameters>>+ extensions (internal issue 448). * Add the +<<VK_EXT_shader_subgroup_vote>>+ and +<<VK_EXT_shader_subgroup_ballot>>+ extensions (internal issue 449). * Update the texture level-of-detail equation in the <<textures-scale-factor,Scale Factor Operation>> section to better approximate the ellipse major and minor axes (internal issue 547). * Forbid non-explicitly allowed uses of interface decorations in the introduction to the <<interfaces,Shader Interfaces>> chapter (internal issue 607). * Replace use of MathJax with KaTeX, for improved load-time performance as well as avoiding the scrolling-and-scrolling behavior due to MathJax asynchronous rendering when loading at an anchor inside the spec. This change also requires moving to HTML5 output for the spec instead of XHTML, and there is a visible difference in that the chapter navigation index is now in a scrollable sidebar instead of at the top of the document. We may or may not retain the nav sidebar based on feedback (internal issue 613). * Improve consistency of markup and formatting in extension appendices (internal issue 631). Other Issues: * Add explicit valid usage statements to slink:VkImageCopy requiring that the source and destination layer ranges be contained in their respective source and destination images. * Add valid usage language for swapchain of flink:vkAcquireNextImage. If the swapchain has been replaced, then it should not be passed to flink:vkAcquireNextImage. * Add a valid usage statement to flink:vkCreateImageView, that the image must have been created with an appropriate usage bit set. * Noted that slink:VkDisplayPresentInfoKHR is a valid extension of slink:VkPresentInfoKHR in the <<wsi_swapchain,WSI Swapchain>> section. * Update valid usage for flink:vkCmdSetViewport and flink:vkCmdSetScissor to account for the multiple viewport feature. If the feature is not enabled, the parameters for these functions have required values that are defined in the <<features-features-multiViewport,multiple viewports>> section of the spec but were not reflected in the valid usage text for these functions. * Add the +<<VK_EXT_swapchain_colorspace>>+ extension defining common color spaces.
2017-01-18 04:11:25 +00:00
\lambda_{base}(x,y) & =
\begin{cases}
shaderOp.Lod & \text{(from optional SPIR-V operand)} \\
\log_2 \left ( \frac{\rho_{max}}{N} \right ) & \text{otherwise}
\end{cases} \\
Change log for February 10, 2017 Vulkan 1.0.40 spec update: * Bump API patch number and header version number to 40 for this update. * There is a major build change in this release. We are now using the Ruby-based ``asciidoctor'' implementation, rather than the Python-based ``asciidoc'' implementation, to process the specification. While the actual specification markup changes were minimal, this requires a new set of build tools and a very different installation process, especially because we now use an experimental direct-to-PDF backend for Asciidoctor instead of Docbook->dblatex->PDF. It is no longer possible to build the Specification using asciidoc. See doc/specs/vulkan/README.adoc for some guidance on installing the new toolchain components. * There are some minor rendering issues in the PDF output due to teething problems with the asciidoctor toolchain, especially with mathematical equations. We are aware of these and working on them. Github Issues: * Updated sample code for the <<sparsememory-examples-basic,sparse resource binding example>> (public issue 97). * Modify line and point clipping behavior in the <<vertexpostproc-clipping, Primitive Clipping>> section to allow for pop-free behavior. The ability to check for which behavior is implemented may be added a future feature or extension (public issue 113). * Unify the discussions of implicit ordering throughout the spec, in particular in the new sections <<drawing-primitive-order, Primitive Order>>, <<primrast-order, Rasterization Order>>, and <<synchronization-implicit, Implicit Synchronization Guarantees>>; the discussion of <<synchronization-submission-order, submission order>>; and references elsewhere to these sections (public issue 133). * Clarify \<\<descriptorsets-compatibility,Pipeline Layout Compatibility>> language and introduce the term ``identically defined'' (public issue 164). * Add a dependency to the +VK_EXT_debug_marker+ extension that's needed to reuse the object type enum from +VK_EXT_debug_report+, and moves the definition of that enum into +VK_EXT_debug_report+ where it should be (public issue 409). * Remove redundant valid usage statement from slink:VkImageBlit (public issue 421). * Update GL_KHR_vulkan_glsl to allow the ternary operator to result in a specialization constant (public issue 424). * Fix valid usage for flink:VkPipelineShaderStageCreateInfo (public issue 426). * Correct typo in New Objects list for <<VK_EXT_debug_report>> (public issue 447). Internal Issues: * Moved to asciidoctor for spec builds (internal issue 121). * Update style guide to describe where to put new extensions-specific asciidoc files, and what to name them (internal issue 626). * Add src/spec/indexExt.py to autogenerate registry index entries linking into the 1.0-extensions specification, instead of maintaining the index manually. (internal issue 642). * Autogenerate extension dependencies and lists of all extensions and all KHR extensions from the "supported" attributes in +vk.xml+. Execute +make config/extDependency.sh+ from +doc/specs/vulkan+ when a supported extension is added to vk.xml, to regenerate the dependency script. The consequence is that specifying a single extension to the +makeExt+ script will automatically enable all extensions it depends on as well, and that the +makeAllExts+ and +makeKHR+ scripts do not need to be updated when a new extension is supported (internal issue 648). * Put extension appendices all at the same asciidoc section level, so KHR WSI extensions show up in the HTML index (internal issue 648). Other Issues: * Imbed images in the generated HTML specs instead of loading them from the images/ directory. * Fix missing EXT in extension name (ename:VK_EXT_SWAPCHAIN_COLOR_SPACE_EXTENSION_NAME). * Add new +VK_EXT_SMPTE_2086_metadata+ extension. * In the <<platformCreateSurface_xlib,Xlib Surface>> section of the +VK_KHR_xlib_surface+ specification, add language warning users that they always need to call code:XinitThreads. * Use the term "presentable image" (rather than "swapchain image") consistently in +VK_KHR_swapchain+ and related extensions, and add a glossary term defining it. * Relocate the valid usage for samples of flink:vkGetPhysicalDeviceSparseImageFormatProperties2KHR::pname:pFormatInfo to be below the flink:VkPhysicalDeviceSparseImageFormatInfo2KHR structure.
2017-02-11 04:37:39 +00:00
\lambda'(x,y) & = \lambda_{base} + \mathbin{clamp}(sampler.bias + shaderOp.bias,-maxSamplerLodBias,maxSamplerLodBias) \\
Change log for January 23, 2017 Vulkan 1.0.39 spec update: * Bump API patch number and header version number to 39 for this update. Github Issues: * Clarified that only accesses via the specified buffer/image subresource ranges are included in the access scopes (public issue 306). * Add missing valid usage statements for flink:vkCreateComputePipelines and flink:vkCreateGraphicsPipelines (public issue 427). Internal Issues: * Add a Note to the <<invariance,Invariance>> appendix about a difference between OpenGL and Vulkan with regards to how primitives derived from offsets are handled (internal issue 355). * Add the +<<VK_KHR_get_physical_device_properties2>>+, +<<VK_KHR_maintenance1>>+, and +<<VK_KHR_shader_draw_parameters>>+ extensions (internal issue 448). * Add the +<<VK_EXT_shader_subgroup_vote>>+ and +<<VK_EXT_shader_subgroup_ballot>>+ extensions (internal issue 449). * Update the texture level-of-detail equation in the <<textures-scale-factor,Scale Factor Operation>> section to better approximate the ellipse major and minor axes (internal issue 547). * Forbid non-explicitly allowed uses of interface decorations in the introduction to the <<interfaces,Shader Interfaces>> chapter (internal issue 607). * Replace use of MathJax with KaTeX, for improved load-time performance as well as avoiding the scrolling-and-scrolling behavior due to MathJax asynchronous rendering when loading at an anchor inside the spec. This change also requires moving to HTML5 output for the spec instead of XHTML, and there is a visible difference in that the chapter navigation index is now in a scrollable sidebar instead of at the top of the document. We may or may not retain the nav sidebar based on feedback (internal issue 613). * Improve consistency of markup and formatting in extension appendices (internal issue 631). Other Issues: * Add explicit valid usage statements to slink:VkImageCopy requiring that the source and destination layer ranges be contained in their respective source and destination images. * Add valid usage language for swapchain of flink:vkAcquireNextImage. If the swapchain has been replaced, then it should not be passed to flink:vkAcquireNextImage. * Add a valid usage statement to flink:vkCreateImageView, that the image must have been created with an appropriate usage bit set. * Noted that slink:VkDisplayPresentInfoKHR is a valid extension of slink:VkPresentInfoKHR in the <<wsi_swapchain,WSI Swapchain>> section. * Update valid usage for flink:vkCmdSetViewport and flink:vkCmdSetScissor to account for the multiple viewport feature. If the feature is not enabled, the parameters for these functions have required values that are defined in the <<features-features-multiViewport,multiple viewports>> section of the spec but were not reflected in the valid usage text for these functions. * Add the +<<VK_EXT_swapchain_colorspace>>+ extension defining common color spaces.
2017-01-18 04:11:25 +00:00
\lambda & =
\begin{cases}
lod_{max}, & \lambda' > lod_{max} \\
\lambda', & lod_{min} \leq \lambda' \leq lod_{max} \\
lod_{min}, & \lambda' < lod_{min} \\
undefined, & lod_{min} > lod_{max} \\
\end{cases}
Change log for February 10, 2017 Vulkan 1.0.40 spec update: * Bump API patch number and header version number to 40 for this update. * There is a major build change in this release. We are now using the Ruby-based ``asciidoctor'' implementation, rather than the Python-based ``asciidoc'' implementation, to process the specification. While the actual specification markup changes were minimal, this requires a new set of build tools and a very different installation process, especially because we now use an experimental direct-to-PDF backend for Asciidoctor instead of Docbook->dblatex->PDF. It is no longer possible to build the Specification using asciidoc. See doc/specs/vulkan/README.adoc for some guidance on installing the new toolchain components. * There are some minor rendering issues in the PDF output due to teething problems with the asciidoctor toolchain, especially with mathematical equations. We are aware of these and working on them. Github Issues: * Updated sample code for the <<sparsememory-examples-basic,sparse resource binding example>> (public issue 97). * Modify line and point clipping behavior in the <<vertexpostproc-clipping, Primitive Clipping>> section to allow for pop-free behavior. The ability to check for which behavior is implemented may be added a future feature or extension (public issue 113). * Unify the discussions of implicit ordering throughout the spec, in particular in the new sections <<drawing-primitive-order, Primitive Order>>, <<primrast-order, Rasterization Order>>, and <<synchronization-implicit, Implicit Synchronization Guarantees>>; the discussion of <<synchronization-submission-order, submission order>>; and references elsewhere to these sections (public issue 133). * Clarify \<\<descriptorsets-compatibility,Pipeline Layout Compatibility>> language and introduce the term ``identically defined'' (public issue 164). * Add a dependency to the +VK_EXT_debug_marker+ extension that's needed to reuse the object type enum from +VK_EXT_debug_report+, and moves the definition of that enum into +VK_EXT_debug_report+ where it should be (public issue 409). * Remove redundant valid usage statement from slink:VkImageBlit (public issue 421). * Update GL_KHR_vulkan_glsl to allow the ternary operator to result in a specialization constant (public issue 424). * Fix valid usage for flink:VkPipelineShaderStageCreateInfo (public issue 426). * Correct typo in New Objects list for <<VK_EXT_debug_report>> (public issue 447). Internal Issues: * Moved to asciidoctor for spec builds (internal issue 121). * Update style guide to describe where to put new extensions-specific asciidoc files, and what to name them (internal issue 626). * Add src/spec/indexExt.py to autogenerate registry index entries linking into the 1.0-extensions specification, instead of maintaining the index manually. (internal issue 642). * Autogenerate extension dependencies and lists of all extensions and all KHR extensions from the "supported" attributes in +vk.xml+. Execute +make config/extDependency.sh+ from +doc/specs/vulkan+ when a supported extension is added to vk.xml, to regenerate the dependency script. The consequence is that specifying a single extension to the +makeExt+ script will automatically enable all extensions it depends on as well, and that the +makeAllExts+ and +makeKHR+ scripts do not need to be updated when a new extension is supported (internal issue 648). * Put extension appendices all at the same asciidoc section level, so KHR WSI extensions show up in the HTML index (internal issue 648). Other Issues: * Imbed images in the generated HTML specs instead of loading them from the images/ directory. * Fix missing EXT in extension name (ename:VK_EXT_SWAPCHAIN_COLOR_SPACE_EXTENSION_NAME). * Add new +VK_EXT_SMPTE_2086_metadata+ extension. * In the <<platformCreateSurface_xlib,Xlib Surface>> section of the +VK_KHR_xlib_surface+ specification, add language warning users that they always need to call code:XinitThreads. * Use the term "presentable image" (rather than "swapchain image") consistently in +VK_KHR_swapchain+ and related extensions, and add a glossary term defining it. * Relocate the valid usage for samples of flink:vkGetPhysicalDeviceSparseImageFormatProperties2KHR::pname:pFormatInfo to be below the flink:VkPhysicalDeviceSparseImageFormatInfo2KHR structure.
2017-02-11 04:37:39 +00:00
\end{aligned}
Change log for January 23, 2017 Vulkan 1.0.39 spec update: * Bump API patch number and header version number to 39 for this update. Github Issues: * Clarified that only accesses via the specified buffer/image subresource ranges are included in the access scopes (public issue 306). * Add missing valid usage statements for flink:vkCreateComputePipelines and flink:vkCreateGraphicsPipelines (public issue 427). Internal Issues: * Add a Note to the <<invariance,Invariance>> appendix about a difference between OpenGL and Vulkan with regards to how primitives derived from offsets are handled (internal issue 355). * Add the +<<VK_KHR_get_physical_device_properties2>>+, +<<VK_KHR_maintenance1>>+, and +<<VK_KHR_shader_draw_parameters>>+ extensions (internal issue 448). * Add the +<<VK_EXT_shader_subgroup_vote>>+ and +<<VK_EXT_shader_subgroup_ballot>>+ extensions (internal issue 449). * Update the texture level-of-detail equation in the <<textures-scale-factor,Scale Factor Operation>> section to better approximate the ellipse major and minor axes (internal issue 547). * Forbid non-explicitly allowed uses of interface decorations in the introduction to the <<interfaces,Shader Interfaces>> chapter (internal issue 607). * Replace use of MathJax with KaTeX, for improved load-time performance as well as avoiding the scrolling-and-scrolling behavior due to MathJax asynchronous rendering when loading at an anchor inside the spec. This change also requires moving to HTML5 output for the spec instead of XHTML, and there is a visible difference in that the chapter navigation index is now in a scrollable sidebar instead of at the top of the document. We may or may not retain the nav sidebar based on feedback (internal issue 613). * Improve consistency of markup and formatting in extension appendices (internal issue 631). Other Issues: * Add explicit valid usage statements to slink:VkImageCopy requiring that the source and destination layer ranges be contained in their respective source and destination images. * Add valid usage language for swapchain of flink:vkAcquireNextImage. If the swapchain has been replaced, then it should not be passed to flink:vkAcquireNextImage. * Add a valid usage statement to flink:vkCreateImageView, that the image must have been created with an appropriate usage bit set. * Noted that slink:VkDisplayPresentInfoKHR is a valid extension of slink:VkPresentInfoKHR in the <<wsi_swapchain,WSI Swapchain>> section. * Update valid usage for flink:vkCmdSetViewport and flink:vkCmdSetScissor to account for the multiple viewport feature. If the feature is not enabled, the parameters for these functions have required values that are defined in the <<features-features-multiViewport,multiple viewports>> section of the spec but were not reflected in the valid usage text for these functions. * Add the +<<VK_EXT_swapchain_colorspace>>+ extension defining common color spaces.
2017-01-18 04:11:25 +00:00
++++++++++++++++++++++++
=== latexmath block 40
[latexmath]
++++++++++++++++++++++++
Change log for February 10, 2017 Vulkan 1.0.40 spec update: * Bump API patch number and header version number to 40 for this update. * There is a major build change in this release. We are now using the Ruby-based ``asciidoctor'' implementation, rather than the Python-based ``asciidoc'' implementation, to process the specification. While the actual specification markup changes were minimal, this requires a new set of build tools and a very different installation process, especially because we now use an experimental direct-to-PDF backend for Asciidoctor instead of Docbook->dblatex->PDF. It is no longer possible to build the Specification using asciidoc. See doc/specs/vulkan/README.adoc for some guidance on installing the new toolchain components. * There are some minor rendering issues in the PDF output due to teething problems with the asciidoctor toolchain, especially with mathematical equations. We are aware of these and working on them. Github Issues: * Updated sample code for the <<sparsememory-examples-basic,sparse resource binding example>> (public issue 97). * Modify line and point clipping behavior in the <<vertexpostproc-clipping, Primitive Clipping>> section to allow for pop-free behavior. The ability to check for which behavior is implemented may be added a future feature or extension (public issue 113). * Unify the discussions of implicit ordering throughout the spec, in particular in the new sections <<drawing-primitive-order, Primitive Order>>, <<primrast-order, Rasterization Order>>, and <<synchronization-implicit, Implicit Synchronization Guarantees>>; the discussion of <<synchronization-submission-order, submission order>>; and references elsewhere to these sections (public issue 133). * Clarify \<\<descriptorsets-compatibility,Pipeline Layout Compatibility>> language and introduce the term ``identically defined'' (public issue 164). * Add a dependency to the +VK_EXT_debug_marker+ extension that's needed to reuse the object type enum from +VK_EXT_debug_report+, and moves the definition of that enum into +VK_EXT_debug_report+ where it should be (public issue 409). * Remove redundant valid usage statement from slink:VkImageBlit (public issue 421). * Update GL_KHR_vulkan_glsl to allow the ternary operator to result in a specialization constant (public issue 424). * Fix valid usage for flink:VkPipelineShaderStageCreateInfo (public issue 426). * Correct typo in New Objects list for <<VK_EXT_debug_report>> (public issue 447). Internal Issues: * Moved to asciidoctor for spec builds (internal issue 121). * Update style guide to describe where to put new extensions-specific asciidoc files, and what to name them (internal issue 626). * Add src/spec/indexExt.py to autogenerate registry index entries linking into the 1.0-extensions specification, instead of maintaining the index manually. (internal issue 642). * Autogenerate extension dependencies and lists of all extensions and all KHR extensions from the "supported" attributes in +vk.xml+. Execute +make config/extDependency.sh+ from +doc/specs/vulkan+ when a supported extension is added to vk.xml, to regenerate the dependency script. The consequence is that specifying a single extension to the +makeExt+ script will automatically enable all extensions it depends on as well, and that the +makeAllExts+ and +makeKHR+ scripts do not need to be updated when a new extension is supported (internal issue 648). * Put extension appendices all at the same asciidoc section level, so KHR WSI extensions show up in the HTML index (internal issue 648). Other Issues: * Imbed images in the generated HTML specs instead of loading them from the images/ directory. * Fix missing EXT in extension name (ename:VK_EXT_SWAPCHAIN_COLOR_SPACE_EXTENSION_NAME). * Add new +VK_EXT_SMPTE_2086_metadata+ extension. * In the <<platformCreateSurface_xlib,Xlib Surface>> section of the +VK_KHR_xlib_surface+ specification, add language warning users that they always need to call code:XinitThreads. * Use the term "presentable image" (rather than "swapchain image") consistently in +VK_KHR_swapchain+ and related extensions, and add a glossary term defining it. * Relocate the valid usage for samples of flink:vkGetPhysicalDeviceSparseImageFormatProperties2KHR::pname:pFormatInfo to be below the flink:VkPhysicalDeviceSparseImageFormatInfo2KHR structure.
2017-02-11 04:37:39 +00:00
\begin{aligned}
Change log for January 23, 2017 Vulkan 1.0.39 spec update: * Bump API patch number and header version number to 39 for this update. Github Issues: * Clarified that only accesses via the specified buffer/image subresource ranges are included in the access scopes (public issue 306). * Add missing valid usage statements for flink:vkCreateComputePipelines and flink:vkCreateGraphicsPipelines (public issue 427). Internal Issues: * Add a Note to the <<invariance,Invariance>> appendix about a difference between OpenGL and Vulkan with regards to how primitives derived from offsets are handled (internal issue 355). * Add the +<<VK_KHR_get_physical_device_properties2>>+, +<<VK_KHR_maintenance1>>+, and +<<VK_KHR_shader_draw_parameters>>+ extensions (internal issue 448). * Add the +<<VK_EXT_shader_subgroup_vote>>+ and +<<VK_EXT_shader_subgroup_ballot>>+ extensions (internal issue 449). * Update the texture level-of-detail equation in the <<textures-scale-factor,Scale Factor Operation>> section to better approximate the ellipse major and minor axes (internal issue 547). * Forbid non-explicitly allowed uses of interface decorations in the introduction to the <<interfaces,Shader Interfaces>> chapter (internal issue 607). * Replace use of MathJax with KaTeX, for improved load-time performance as well as avoiding the scrolling-and-scrolling behavior due to MathJax asynchronous rendering when loading at an anchor inside the spec. This change also requires moving to HTML5 output for the spec instead of XHTML, and there is a visible difference in that the chapter navigation index is now in a scrollable sidebar instead of at the top of the document. We may or may not retain the nav sidebar based on feedback (internal issue 613). * Improve consistency of markup and formatting in extension appendices (internal issue 631). Other Issues: * Add explicit valid usage statements to slink:VkImageCopy requiring that the source and destination layer ranges be contained in their respective source and destination images. * Add valid usage language for swapchain of flink:vkAcquireNextImage. If the swapchain has been replaced, then it should not be passed to flink:vkAcquireNextImage. * Add a valid usage statement to flink:vkCreateImageView, that the image must have been created with an appropriate usage bit set. * Noted that slink:VkDisplayPresentInfoKHR is a valid extension of slink:VkPresentInfoKHR in the <<wsi_swapchain,WSI Swapchain>> section. * Update valid usage for flink:vkCmdSetViewport and flink:vkCmdSetScissor to account for the multiple viewport feature. If the feature is not enabled, the parameters for these functions have required values that are defined in the <<features-features-multiViewport,multiple viewports>> section of the spec but were not reflected in the valid usage text for these functions. * Add the +<<VK_EXT_swapchain_colorspace>>+ extension defining common color spaces.
2017-01-18 04:11:25 +00:00
sampler.bias & = mipLodBias & \text{(from sampler descriptor)} \\
shaderOp.bias & =
\begin{cases}
Bias & \text{(from optional SPIR-V operand)} \\
0 & \text{otherwise}
\end{cases} \\
sampler.lod_{min} & = minLod & \text{(from sampler descriptor)} \\
shaderOp.lod_{min} & =
\begin{cases}
MinLod & \text{(from optional SPIR-V operand)} \\
0 & \text{otherwise}
\end{cases} \\
\\
lod_{min} & = \max(sampler.lod_{min}, shaderOp.lod_{min}) \\
lod_{max} & = maxLod & \text{(from sampler descriptor)}
Change log for February 10, 2017 Vulkan 1.0.40 spec update: * Bump API patch number and header version number to 40 for this update. * There is a major build change in this release. We are now using the Ruby-based ``asciidoctor'' implementation, rather than the Python-based ``asciidoc'' implementation, to process the specification. While the actual specification markup changes were minimal, this requires a new set of build tools and a very different installation process, especially because we now use an experimental direct-to-PDF backend for Asciidoctor instead of Docbook->dblatex->PDF. It is no longer possible to build the Specification using asciidoc. See doc/specs/vulkan/README.adoc for some guidance on installing the new toolchain components. * There are some minor rendering issues in the PDF output due to teething problems with the asciidoctor toolchain, especially with mathematical equations. We are aware of these and working on them. Github Issues: * Updated sample code for the <<sparsememory-examples-basic,sparse resource binding example>> (public issue 97). * Modify line and point clipping behavior in the <<vertexpostproc-clipping, Primitive Clipping>> section to allow for pop-free behavior. The ability to check for which behavior is implemented may be added a future feature or extension (public issue 113). * Unify the discussions of implicit ordering throughout the spec, in particular in the new sections <<drawing-primitive-order, Primitive Order>>, <<primrast-order, Rasterization Order>>, and <<synchronization-implicit, Implicit Synchronization Guarantees>>; the discussion of <<synchronization-submission-order, submission order>>; and references elsewhere to these sections (public issue 133). * Clarify \<\<descriptorsets-compatibility,Pipeline Layout Compatibility>> language and introduce the term ``identically defined'' (public issue 164). * Add a dependency to the +VK_EXT_debug_marker+ extension that's needed to reuse the object type enum from +VK_EXT_debug_report+, and moves the definition of that enum into +VK_EXT_debug_report+ where it should be (public issue 409). * Remove redundant valid usage statement from slink:VkImageBlit (public issue 421). * Update GL_KHR_vulkan_glsl to allow the ternary operator to result in a specialization constant (public issue 424). * Fix valid usage for flink:VkPipelineShaderStageCreateInfo (public issue 426). * Correct typo in New Objects list for <<VK_EXT_debug_report>> (public issue 447). Internal Issues: * Moved to asciidoctor for spec builds (internal issue 121). * Update style guide to describe where to put new extensions-specific asciidoc files, and what to name them (internal issue 626). * Add src/spec/indexExt.py to autogenerate registry index entries linking into the 1.0-extensions specification, instead of maintaining the index manually. (internal issue 642). * Autogenerate extension dependencies and lists of all extensions and all KHR extensions from the "supported" attributes in +vk.xml+. Execute +make config/extDependency.sh+ from +doc/specs/vulkan+ when a supported extension is added to vk.xml, to regenerate the dependency script. The consequence is that specifying a single extension to the +makeExt+ script will automatically enable all extensions it depends on as well, and that the +makeAllExts+ and +makeKHR+ scripts do not need to be updated when a new extension is supported (internal issue 648). * Put extension appendices all at the same asciidoc section level, so KHR WSI extensions show up in the HTML index (internal issue 648). Other Issues: * Imbed images in the generated HTML specs instead of loading them from the images/ directory. * Fix missing EXT in extension name (ename:VK_EXT_SWAPCHAIN_COLOR_SPACE_EXTENSION_NAME). * Add new +VK_EXT_SMPTE_2086_metadata+ extension. * In the <<platformCreateSurface_xlib,Xlib Surface>> section of the +VK_KHR_xlib_surface+ specification, add language warning users that they always need to call code:XinitThreads. * Use the term "presentable image" (rather than "swapchain image") consistently in +VK_KHR_swapchain+ and related extensions, and add a glossary term defining it. * Relocate the valid usage for samples of flink:vkGetPhysicalDeviceSparseImageFormatProperties2KHR::pname:pFormatInfo to be below the flink:VkPhysicalDeviceSparseImageFormatInfo2KHR structure.
2017-02-11 04:37:39 +00:00
\end{aligned}
Change log for January 23, 2017 Vulkan 1.0.39 spec update: * Bump API patch number and header version number to 39 for this update. Github Issues: * Clarified that only accesses via the specified buffer/image subresource ranges are included in the access scopes (public issue 306). * Add missing valid usage statements for flink:vkCreateComputePipelines and flink:vkCreateGraphicsPipelines (public issue 427). Internal Issues: * Add a Note to the <<invariance,Invariance>> appendix about a difference between OpenGL and Vulkan with regards to how primitives derived from offsets are handled (internal issue 355). * Add the +<<VK_KHR_get_physical_device_properties2>>+, +<<VK_KHR_maintenance1>>+, and +<<VK_KHR_shader_draw_parameters>>+ extensions (internal issue 448). * Add the +<<VK_EXT_shader_subgroup_vote>>+ and +<<VK_EXT_shader_subgroup_ballot>>+ extensions (internal issue 449). * Update the texture level-of-detail equation in the <<textures-scale-factor,Scale Factor Operation>> section to better approximate the ellipse major and minor axes (internal issue 547). * Forbid non-explicitly allowed uses of interface decorations in the introduction to the <<interfaces,Shader Interfaces>> chapter (internal issue 607). * Replace use of MathJax with KaTeX, for improved load-time performance as well as avoiding the scrolling-and-scrolling behavior due to MathJax asynchronous rendering when loading at an anchor inside the spec. This change also requires moving to HTML5 output for the spec instead of XHTML, and there is a visible difference in that the chapter navigation index is now in a scrollable sidebar instead of at the top of the document. We may or may not retain the nav sidebar based on feedback (internal issue 613). * Improve consistency of markup and formatting in extension appendices (internal issue 631). Other Issues: * Add explicit valid usage statements to slink:VkImageCopy requiring that the source and destination layer ranges be contained in their respective source and destination images. * Add valid usage language for swapchain of flink:vkAcquireNextImage. If the swapchain has been replaced, then it should not be passed to flink:vkAcquireNextImage. * Add a valid usage statement to flink:vkCreateImageView, that the image must have been created with an appropriate usage bit set. * Noted that slink:VkDisplayPresentInfoKHR is a valid extension of slink:VkPresentInfoKHR in the <<wsi_swapchain,WSI Swapchain>> section. * Update valid usage for flink:vkCmdSetViewport and flink:vkCmdSetScissor to account for the multiple viewport feature. If the feature is not enabled, the parameters for these functions have required values that are defined in the <<features-features-multiViewport,multiple viewports>> section of the spec but were not reflected in the valid usage text for these functions. * Add the +<<VK_EXT_swapchain_colorspace>>+ extension defining common color spaces.
2017-01-18 04:11:25 +00:00
++++++++++++++++++++++++
=== latexmath block 41
[latexmath]
++++++++++++++++++++++++
Change log for February 10, 2017 Vulkan 1.0.40 spec update: * Bump API patch number and header version number to 40 for this update. * There is a major build change in this release. We are now using the Ruby-based ``asciidoctor'' implementation, rather than the Python-based ``asciidoc'' implementation, to process the specification. While the actual specification markup changes were minimal, this requires a new set of build tools and a very different installation process, especially because we now use an experimental direct-to-PDF backend for Asciidoctor instead of Docbook->dblatex->PDF. It is no longer possible to build the Specification using asciidoc. See doc/specs/vulkan/README.adoc for some guidance on installing the new toolchain components. * There are some minor rendering issues in the PDF output due to teething problems with the asciidoctor toolchain, especially with mathematical equations. We are aware of these and working on them. Github Issues: * Updated sample code for the <<sparsememory-examples-basic,sparse resource binding example>> (public issue 97). * Modify line and point clipping behavior in the <<vertexpostproc-clipping, Primitive Clipping>> section to allow for pop-free behavior. The ability to check for which behavior is implemented may be added a future feature or extension (public issue 113). * Unify the discussions of implicit ordering throughout the spec, in particular in the new sections <<drawing-primitive-order, Primitive Order>>, <<primrast-order, Rasterization Order>>, and <<synchronization-implicit, Implicit Synchronization Guarantees>>; the discussion of <<synchronization-submission-order, submission order>>; and references elsewhere to these sections (public issue 133). * Clarify \<\<descriptorsets-compatibility,Pipeline Layout Compatibility>> language and introduce the term ``identically defined'' (public issue 164). * Add a dependency to the +VK_EXT_debug_marker+ extension that's needed to reuse the object type enum from +VK_EXT_debug_report+, and moves the definition of that enum into +VK_EXT_debug_report+ where it should be (public issue 409). * Remove redundant valid usage statement from slink:VkImageBlit (public issue 421). * Update GL_KHR_vulkan_glsl to allow the ternary operator to result in a specialization constant (public issue 424). * Fix valid usage for flink:VkPipelineShaderStageCreateInfo (public issue 426). * Correct typo in New Objects list for <<VK_EXT_debug_report>> (public issue 447). Internal Issues: * Moved to asciidoctor for spec builds (internal issue 121). * Update style guide to describe where to put new extensions-specific asciidoc files, and what to name them (internal issue 626). * Add src/spec/indexExt.py to autogenerate registry index entries linking into the 1.0-extensions specification, instead of maintaining the index manually. (internal issue 642). * Autogenerate extension dependencies and lists of all extensions and all KHR extensions from the "supported" attributes in +vk.xml+. Execute +make config/extDependency.sh+ from +doc/specs/vulkan+ when a supported extension is added to vk.xml, to regenerate the dependency script. The consequence is that specifying a single extension to the +makeExt+ script will automatically enable all extensions it depends on as well, and that the +makeAllExts+ and +makeKHR+ scripts do not need to be updated when a new extension is supported (internal issue 648). * Put extension appendices all at the same asciidoc section level, so KHR WSI extensions show up in the HTML index (internal issue 648). Other Issues: * Imbed images in the generated HTML specs instead of loading them from the images/ directory. * Fix missing EXT in extension name (ename:VK_EXT_SWAPCHAIN_COLOR_SPACE_EXTENSION_NAME). * Add new +VK_EXT_SMPTE_2086_metadata+ extension. * In the <<platformCreateSurface_xlib,Xlib Surface>> section of the +VK_KHR_xlib_surface+ specification, add language warning users that they always need to call code:XinitThreads. * Use the term "presentable image" (rather than "swapchain image") consistently in +VK_KHR_swapchain+ and related extensions, and add a glossary term defining it. * Relocate the valid usage for samples of flink:vkGetPhysicalDeviceSparseImageFormatProperties2KHR::pname:pFormatInfo to be below the flink:VkPhysicalDeviceSparseImageFormatInfo2KHR structure.
2017-02-11 04:37:39 +00:00
\begin{aligned}
Change log for January 23, 2017 Vulkan 1.0.39 spec update: * Bump API patch number and header version number to 39 for this update. Github Issues: * Clarified that only accesses via the specified buffer/image subresource ranges are included in the access scopes (public issue 306). * Add missing valid usage statements for flink:vkCreateComputePipelines and flink:vkCreateGraphicsPipelines (public issue 427). Internal Issues: * Add a Note to the <<invariance,Invariance>> appendix about a difference between OpenGL and Vulkan with regards to how primitives derived from offsets are handled (internal issue 355). * Add the +<<VK_KHR_get_physical_device_properties2>>+, +<<VK_KHR_maintenance1>>+, and +<<VK_KHR_shader_draw_parameters>>+ extensions (internal issue 448). * Add the +<<VK_EXT_shader_subgroup_vote>>+ and +<<VK_EXT_shader_subgroup_ballot>>+ extensions (internal issue 449). * Update the texture level-of-detail equation in the <<textures-scale-factor,Scale Factor Operation>> section to better approximate the ellipse major and minor axes (internal issue 547). * Forbid non-explicitly allowed uses of interface decorations in the introduction to the <<interfaces,Shader Interfaces>> chapter (internal issue 607). * Replace use of MathJax with KaTeX, for improved load-time performance as well as avoiding the scrolling-and-scrolling behavior due to MathJax asynchronous rendering when loading at an anchor inside the spec. This change also requires moving to HTML5 output for the spec instead of XHTML, and there is a visible difference in that the chapter navigation index is now in a scrollable sidebar instead of at the top of the document. We may or may not retain the nav sidebar based on feedback (internal issue 613). * Improve consistency of markup and formatting in extension appendices (internal issue 631). Other Issues: * Add explicit valid usage statements to slink:VkImageCopy requiring that the source and destination layer ranges be contained in their respective source and destination images. * Add valid usage language for swapchain of flink:vkAcquireNextImage. If the swapchain has been replaced, then it should not be passed to flink:vkAcquireNextImage. * Add a valid usage statement to flink:vkCreateImageView, that the image must have been created with an appropriate usage bit set. * Noted that slink:VkDisplayPresentInfoKHR is a valid extension of slink:VkPresentInfoKHR in the <<wsi_swapchain,WSI Swapchain>> section. * Update valid usage for flink:vkCmdSetViewport and flink:vkCmdSetScissor to account for the multiple viewport feature. If the feature is not enabled, the parameters for these functions have required values that are defined in the <<features-features-multiViewport,multiple viewports>> section of the spec but were not reflected in the valid usage text for these functions. * Add the +<<VK_EXT_swapchain_colorspace>>+ extension defining common color spaces.
2017-01-18 04:11:25 +00:00
d =
\begin{cases}
level_{base}, & \lambda \leq \frac{1}{2} \\[.5em]
nearest(\lambda), & \lambda > \frac{1}{2},
level_{base} + \lambda \leq
q + \frac{1}{2} \\[.5em]
q, & \lambda > \frac{1}{2},
level_{base} + \lambda > q + \frac{1}{2}
\end{cases}
Change log for February 10, 2017 Vulkan 1.0.40 spec update: * Bump API patch number and header version number to 40 for this update. * There is a major build change in this release. We are now using the Ruby-based ``asciidoctor'' implementation, rather than the Python-based ``asciidoc'' implementation, to process the specification. While the actual specification markup changes were minimal, this requires a new set of build tools and a very different installation process, especially because we now use an experimental direct-to-PDF backend for Asciidoctor instead of Docbook->dblatex->PDF. It is no longer possible to build the Specification using asciidoc. See doc/specs/vulkan/README.adoc for some guidance on installing the new toolchain components. * There are some minor rendering issues in the PDF output due to teething problems with the asciidoctor toolchain, especially with mathematical equations. We are aware of these and working on them. Github Issues: * Updated sample code for the <<sparsememory-examples-basic,sparse resource binding example>> (public issue 97). * Modify line and point clipping behavior in the <<vertexpostproc-clipping, Primitive Clipping>> section to allow for pop-free behavior. The ability to check for which behavior is implemented may be added a future feature or extension (public issue 113). * Unify the discussions of implicit ordering throughout the spec, in particular in the new sections <<drawing-primitive-order, Primitive Order>>, <<primrast-order, Rasterization Order>>, and <<synchronization-implicit, Implicit Synchronization Guarantees>>; the discussion of <<synchronization-submission-order, submission order>>; and references elsewhere to these sections (public issue 133). * Clarify \<\<descriptorsets-compatibility,Pipeline Layout Compatibility>> language and introduce the term ``identically defined'' (public issue 164). * Add a dependency to the +VK_EXT_debug_marker+ extension that's needed to reuse the object type enum from +VK_EXT_debug_report+, and moves the definition of that enum into +VK_EXT_debug_report+ where it should be (public issue 409). * Remove redundant valid usage statement from slink:VkImageBlit (public issue 421). * Update GL_KHR_vulkan_glsl to allow the ternary operator to result in a specialization constant (public issue 424). * Fix valid usage for flink:VkPipelineShaderStageCreateInfo (public issue 426). * Correct typo in New Objects list for <<VK_EXT_debug_report>> (public issue 447). Internal Issues: * Moved to asciidoctor for spec builds (internal issue 121). * Update style guide to describe where to put new extensions-specific asciidoc files, and what to name them (internal issue 626). * Add src/spec/indexExt.py to autogenerate registry index entries linking into the 1.0-extensions specification, instead of maintaining the index manually. (internal issue 642). * Autogenerate extension dependencies and lists of all extensions and all KHR extensions from the "supported" attributes in +vk.xml+. Execute +make config/extDependency.sh+ from +doc/specs/vulkan+ when a supported extension is added to vk.xml, to regenerate the dependency script. The consequence is that specifying a single extension to the +makeExt+ script will automatically enable all extensions it depends on as well, and that the +makeAllExts+ and +makeKHR+ scripts do not need to be updated when a new extension is supported (internal issue 648). * Put extension appendices all at the same asciidoc section level, so KHR WSI extensions show up in the HTML index (internal issue 648). Other Issues: * Imbed images in the generated HTML specs instead of loading them from the images/ directory. * Fix missing EXT in extension name (ename:VK_EXT_SWAPCHAIN_COLOR_SPACE_EXTENSION_NAME). * Add new +VK_EXT_SMPTE_2086_metadata+ extension. * In the <<platformCreateSurface_xlib,Xlib Surface>> section of the +VK_KHR_xlib_surface+ specification, add language warning users that they always need to call code:XinitThreads. * Use the term "presentable image" (rather than "swapchain image") consistently in +VK_KHR_swapchain+ and related extensions, and add a glossary term defining it. * Relocate the valid usage for samples of flink:vkGetPhysicalDeviceSparseImageFormatProperties2KHR::pname:pFormatInfo to be below the flink:VkPhysicalDeviceSparseImageFormatInfo2KHR structure.
2017-02-11 04:37:39 +00:00
\end{aligned}
Change log for January 23, 2017 Vulkan 1.0.39 spec update: * Bump API patch number and header version number to 39 for this update. Github Issues: * Clarified that only accesses via the specified buffer/image subresource ranges are included in the access scopes (public issue 306). * Add missing valid usage statements for flink:vkCreateComputePipelines and flink:vkCreateGraphicsPipelines (public issue 427). Internal Issues: * Add a Note to the <<invariance,Invariance>> appendix about a difference between OpenGL and Vulkan with regards to how primitives derived from offsets are handled (internal issue 355). * Add the +<<VK_KHR_get_physical_device_properties2>>+, +<<VK_KHR_maintenance1>>+, and +<<VK_KHR_shader_draw_parameters>>+ extensions (internal issue 448). * Add the +<<VK_EXT_shader_subgroup_vote>>+ and +<<VK_EXT_shader_subgroup_ballot>>+ extensions (internal issue 449). * Update the texture level-of-detail equation in the <<textures-scale-factor,Scale Factor Operation>> section to better approximate the ellipse major and minor axes (internal issue 547). * Forbid non-explicitly allowed uses of interface decorations in the introduction to the <<interfaces,Shader Interfaces>> chapter (internal issue 607). * Replace use of MathJax with KaTeX, for improved load-time performance as well as avoiding the scrolling-and-scrolling behavior due to MathJax asynchronous rendering when loading at an anchor inside the spec. This change also requires moving to HTML5 output for the spec instead of XHTML, and there is a visible difference in that the chapter navigation index is now in a scrollable sidebar instead of at the top of the document. We may or may not retain the nav sidebar based on feedback (internal issue 613). * Improve consistency of markup and formatting in extension appendices (internal issue 631). Other Issues: * Add explicit valid usage statements to slink:VkImageCopy requiring that the source and destination layer ranges be contained in their respective source and destination images. * Add valid usage language for swapchain of flink:vkAcquireNextImage. If the swapchain has been replaced, then it should not be passed to flink:vkAcquireNextImage. * Add a valid usage statement to flink:vkCreateImageView, that the image must have been created with an appropriate usage bit set. * Noted that slink:VkDisplayPresentInfoKHR is a valid extension of slink:VkPresentInfoKHR in the <<wsi_swapchain,WSI Swapchain>> section. * Update valid usage for flink:vkCmdSetViewport and flink:vkCmdSetScissor to account for the multiple viewport feature. If the feature is not enabled, the parameters for these functions have required values that are defined in the <<features-features-multiViewport,multiple viewports>> section of the spec but were not reflected in the valid usage text for these functions. * Add the +<<VK_EXT_swapchain_colorspace>>+ extension defining common color spaces.
2017-01-18 04:11:25 +00:00
++++++++++++++++++++++++
=== latexmath block 42
[latexmath]
++++++++++++++++++++++++
Change log for February 10, 2017 Vulkan 1.0.40 spec update: * Bump API patch number and header version number to 40 for this update. * There is a major build change in this release. We are now using the Ruby-based ``asciidoctor'' implementation, rather than the Python-based ``asciidoc'' implementation, to process the specification. While the actual specification markup changes were minimal, this requires a new set of build tools and a very different installation process, especially because we now use an experimental direct-to-PDF backend for Asciidoctor instead of Docbook->dblatex->PDF. It is no longer possible to build the Specification using asciidoc. See doc/specs/vulkan/README.adoc for some guidance on installing the new toolchain components. * There are some minor rendering issues in the PDF output due to teething problems with the asciidoctor toolchain, especially with mathematical equations. We are aware of these and working on them. Github Issues: * Updated sample code for the <<sparsememory-examples-basic,sparse resource binding example>> (public issue 97). * Modify line and point clipping behavior in the <<vertexpostproc-clipping, Primitive Clipping>> section to allow for pop-free behavior. The ability to check for which behavior is implemented may be added a future feature or extension (public issue 113). * Unify the discussions of implicit ordering throughout the spec, in particular in the new sections <<drawing-primitive-order, Primitive Order>>, <<primrast-order, Rasterization Order>>, and <<synchronization-implicit, Implicit Synchronization Guarantees>>; the discussion of <<synchronization-submission-order, submission order>>; and references elsewhere to these sections (public issue 133). * Clarify \<\<descriptorsets-compatibility,Pipeline Layout Compatibility>> language and introduce the term ``identically defined'' (public issue 164). * Add a dependency to the +VK_EXT_debug_marker+ extension that's needed to reuse the object type enum from +VK_EXT_debug_report+, and moves the definition of that enum into +VK_EXT_debug_report+ where it should be (public issue 409). * Remove redundant valid usage statement from slink:VkImageBlit (public issue 421). * Update GL_KHR_vulkan_glsl to allow the ternary operator to result in a specialization constant (public issue 424). * Fix valid usage for flink:VkPipelineShaderStageCreateInfo (public issue 426). * Correct typo in New Objects list for <<VK_EXT_debug_report>> (public issue 447). Internal Issues: * Moved to asciidoctor for spec builds (internal issue 121). * Update style guide to describe where to put new extensions-specific asciidoc files, and what to name them (internal issue 626). * Add src/spec/indexExt.py to autogenerate registry index entries linking into the 1.0-extensions specification, instead of maintaining the index manually. (internal issue 642). * Autogenerate extension dependencies and lists of all extensions and all KHR extensions from the "supported" attributes in +vk.xml+. Execute +make config/extDependency.sh+ from +doc/specs/vulkan+ when a supported extension is added to vk.xml, to regenerate the dependency script. The consequence is that specifying a single extension to the +makeExt+ script will automatically enable all extensions it depends on as well, and that the +makeAllExts+ and +makeKHR+ scripts do not need to be updated when a new extension is supported (internal issue 648). * Put extension appendices all at the same asciidoc section level, so KHR WSI extensions show up in the HTML index (internal issue 648). Other Issues: * Imbed images in the generated HTML specs instead of loading them from the images/ directory. * Fix missing EXT in extension name (ename:VK_EXT_SWAPCHAIN_COLOR_SPACE_EXTENSION_NAME). * Add new +VK_EXT_SMPTE_2086_metadata+ extension. * In the <<platformCreateSurface_xlib,Xlib Surface>> section of the +VK_KHR_xlib_surface+ specification, add language warning users that they always need to call code:XinitThreads. * Use the term "presentable image" (rather than "swapchain image") consistently in +VK_KHR_swapchain+ and related extensions, and add a glossary term defining it. * Relocate the valid usage for samples of flink:vkGetPhysicalDeviceSparseImageFormatProperties2KHR::pname:pFormatInfo to be below the flink:VkPhysicalDeviceSparseImageFormatInfo2KHR structure.
2017-02-11 04:37:39 +00:00
\begin{aligned}
Change log for January 23, 2017 Vulkan 1.0.39 spec update: * Bump API patch number and header version number to 39 for this update. Github Issues: * Clarified that only accesses via the specified buffer/image subresource ranges are included in the access scopes (public issue 306). * Add missing valid usage statements for flink:vkCreateComputePipelines and flink:vkCreateGraphicsPipelines (public issue 427). Internal Issues: * Add a Note to the <<invariance,Invariance>> appendix about a difference between OpenGL and Vulkan with regards to how primitives derived from offsets are handled (internal issue 355). * Add the +<<VK_KHR_get_physical_device_properties2>>+, +<<VK_KHR_maintenance1>>+, and +<<VK_KHR_shader_draw_parameters>>+ extensions (internal issue 448). * Add the +<<VK_EXT_shader_subgroup_vote>>+ and +<<VK_EXT_shader_subgroup_ballot>>+ extensions (internal issue 449). * Update the texture level-of-detail equation in the <<textures-scale-factor,Scale Factor Operation>> section to better approximate the ellipse major and minor axes (internal issue 547). * Forbid non-explicitly allowed uses of interface decorations in the introduction to the <<interfaces,Shader Interfaces>> chapter (internal issue 607). * Replace use of MathJax with KaTeX, for improved load-time performance as well as avoiding the scrolling-and-scrolling behavior due to MathJax asynchronous rendering when loading at an anchor inside the spec. This change also requires moving to HTML5 output for the spec instead of XHTML, and there is a visible difference in that the chapter navigation index is now in a scrollable sidebar instead of at the top of the document. We may or may not retain the nav sidebar based on feedback (internal issue 613). * Improve consistency of markup and formatting in extension appendices (internal issue 631). Other Issues: * Add explicit valid usage statements to slink:VkImageCopy requiring that the source and destination layer ranges be contained in their respective source and destination images. * Add valid usage language for swapchain of flink:vkAcquireNextImage. If the swapchain has been replaced, then it should not be passed to flink:vkAcquireNextImage. * Add a valid usage statement to flink:vkCreateImageView, that the image must have been created with an appropriate usage bit set. * Noted that slink:VkDisplayPresentInfoKHR is a valid extension of slink:VkPresentInfoKHR in the <<wsi_swapchain,WSI Swapchain>> section. * Update valid usage for flink:vkCmdSetViewport and flink:vkCmdSetScissor to account for the multiple viewport feature. If the feature is not enabled, the parameters for these functions have required values that are defined in the <<features-features-multiViewport,multiple viewports>> section of the spec but were not reflected in the valid usage text for these functions. * Add the +<<VK_EXT_swapchain_colorspace>>+ extension defining common color spaces.
2017-01-18 04:11:25 +00:00
nearest(\lambda) & =
\begin{cases}
\left \lceil level_{base}+\lambda + \frac{1}{2}\right \rceil - 1, &
\text{preferred} \\
\left \lfloor level_{base}+\lambda + \frac{1}{2}\right \rfloor, &
\text{alternative}
\end{cases}
Change log for February 10, 2017 Vulkan 1.0.40 spec update: * Bump API patch number and header version number to 40 for this update. * There is a major build change in this release. We are now using the Ruby-based ``asciidoctor'' implementation, rather than the Python-based ``asciidoc'' implementation, to process the specification. While the actual specification markup changes were minimal, this requires a new set of build tools and a very different installation process, especially because we now use an experimental direct-to-PDF backend for Asciidoctor instead of Docbook->dblatex->PDF. It is no longer possible to build the Specification using asciidoc. See doc/specs/vulkan/README.adoc for some guidance on installing the new toolchain components. * There are some minor rendering issues in the PDF output due to teething problems with the asciidoctor toolchain, especially with mathematical equations. We are aware of these and working on them. Github Issues: * Updated sample code for the <<sparsememory-examples-basic,sparse resource binding example>> (public issue 97). * Modify line and point clipping behavior in the <<vertexpostproc-clipping, Primitive Clipping>> section to allow for pop-free behavior. The ability to check for which behavior is implemented may be added a future feature or extension (public issue 113). * Unify the discussions of implicit ordering throughout the spec, in particular in the new sections <<drawing-primitive-order, Primitive Order>>, <<primrast-order, Rasterization Order>>, and <<synchronization-implicit, Implicit Synchronization Guarantees>>; the discussion of <<synchronization-submission-order, submission order>>; and references elsewhere to these sections (public issue 133). * Clarify \<\<descriptorsets-compatibility,Pipeline Layout Compatibility>> language and introduce the term ``identically defined'' (public issue 164). * Add a dependency to the +VK_EXT_debug_marker+ extension that's needed to reuse the object type enum from +VK_EXT_debug_report+, and moves the definition of that enum into +VK_EXT_debug_report+ where it should be (public issue 409). * Remove redundant valid usage statement from slink:VkImageBlit (public issue 421). * Update GL_KHR_vulkan_glsl to allow the ternary operator to result in a specialization constant (public issue 424). * Fix valid usage for flink:VkPipelineShaderStageCreateInfo (public issue 426). * Correct typo in New Objects list for <<VK_EXT_debug_report>> (public issue 447). Internal Issues: * Moved to asciidoctor for spec builds (internal issue 121). * Update style guide to describe where to put new extensions-specific asciidoc files, and what to name them (internal issue 626). * Add src/spec/indexExt.py to autogenerate registry index entries linking into the 1.0-extensions specification, instead of maintaining the index manually. (internal issue 642). * Autogenerate extension dependencies and lists of all extensions and all KHR extensions from the "supported" attributes in +vk.xml+. Execute +make config/extDependency.sh+ from +doc/specs/vulkan+ when a supported extension is added to vk.xml, to regenerate the dependency script. The consequence is that specifying a single extension to the +makeExt+ script will automatically enable all extensions it depends on as well, and that the +makeAllExts+ and +makeKHR+ scripts do not need to be updated when a new extension is supported (internal issue 648). * Put extension appendices all at the same asciidoc section level, so KHR WSI extensions show up in the HTML index (internal issue 648). Other Issues: * Imbed images in the generated HTML specs instead of loading them from the images/ directory. * Fix missing EXT in extension name (ename:VK_EXT_SWAPCHAIN_COLOR_SPACE_EXTENSION_NAME). * Add new +VK_EXT_SMPTE_2086_metadata+ extension. * In the <<platformCreateSurface_xlib,Xlib Surface>> section of the +VK_KHR_xlib_surface+ specification, add language warning users that they always need to call code:XinitThreads. * Use the term "presentable image" (rather than "swapchain image") consistently in +VK_KHR_swapchain+ and related extensions, and add a glossary term defining it. * Relocate the valid usage for samples of flink:vkGetPhysicalDeviceSparseImageFormatProperties2KHR::pname:pFormatInfo to be below the flink:VkPhysicalDeviceSparseImageFormatInfo2KHR structure.
2017-02-11 04:37:39 +00:00
\end{aligned}
Change log for January 23, 2017 Vulkan 1.0.39 spec update: * Bump API patch number and header version number to 39 for this update. Github Issues: * Clarified that only accesses via the specified buffer/image subresource ranges are included in the access scopes (public issue 306). * Add missing valid usage statements for flink:vkCreateComputePipelines and flink:vkCreateGraphicsPipelines (public issue 427). Internal Issues: * Add a Note to the <<invariance,Invariance>> appendix about a difference between OpenGL and Vulkan with regards to how primitives derived from offsets are handled (internal issue 355). * Add the +<<VK_KHR_get_physical_device_properties2>>+, +<<VK_KHR_maintenance1>>+, and +<<VK_KHR_shader_draw_parameters>>+ extensions (internal issue 448). * Add the +<<VK_EXT_shader_subgroup_vote>>+ and +<<VK_EXT_shader_subgroup_ballot>>+ extensions (internal issue 449). * Update the texture level-of-detail equation in the <<textures-scale-factor,Scale Factor Operation>> section to better approximate the ellipse major and minor axes (internal issue 547). * Forbid non-explicitly allowed uses of interface decorations in the introduction to the <<interfaces,Shader Interfaces>> chapter (internal issue 607). * Replace use of MathJax with KaTeX, for improved load-time performance as well as avoiding the scrolling-and-scrolling behavior due to MathJax asynchronous rendering when loading at an anchor inside the spec. This change also requires moving to HTML5 output for the spec instead of XHTML, and there is a visible difference in that the chapter navigation index is now in a scrollable sidebar instead of at the top of the document. We may or may not retain the nav sidebar based on feedback (internal issue 613). * Improve consistency of markup and formatting in extension appendices (internal issue 631). Other Issues: * Add explicit valid usage statements to slink:VkImageCopy requiring that the source and destination layer ranges be contained in their respective source and destination images. * Add valid usage language for swapchain of flink:vkAcquireNextImage. If the swapchain has been replaced, then it should not be passed to flink:vkAcquireNextImage. * Add a valid usage statement to flink:vkCreateImageView, that the image must have been created with an appropriate usage bit set. * Noted that slink:VkDisplayPresentInfoKHR is a valid extension of slink:VkPresentInfoKHR in the <<wsi_swapchain,WSI Swapchain>> section. * Update valid usage for flink:vkCmdSetViewport and flink:vkCmdSetScissor to account for the multiple viewport feature. If the feature is not enabled, the parameters for these functions have required values that are defined in the <<features-features-multiViewport,multiple viewports>> section of the spec but were not reflected in the valid usage text for these functions. * Add the +<<VK_EXT_swapchain_colorspace>>+ extension defining common color spaces.
2017-01-18 04:11:25 +00:00
++++++++++++++++++++++++
=== latexmath block 43
[latexmath]
++++++++++++++++++++++++
Change log for February 10, 2017 Vulkan 1.0.40 spec update: * Bump API patch number and header version number to 40 for this update. * There is a major build change in this release. We are now using the Ruby-based ``asciidoctor'' implementation, rather than the Python-based ``asciidoc'' implementation, to process the specification. While the actual specification markup changes were minimal, this requires a new set of build tools and a very different installation process, especially because we now use an experimental direct-to-PDF backend for Asciidoctor instead of Docbook->dblatex->PDF. It is no longer possible to build the Specification using asciidoc. See doc/specs/vulkan/README.adoc for some guidance on installing the new toolchain components. * There are some minor rendering issues in the PDF output due to teething problems with the asciidoctor toolchain, especially with mathematical equations. We are aware of these and working on them. Github Issues: * Updated sample code for the <<sparsememory-examples-basic,sparse resource binding example>> (public issue 97). * Modify line and point clipping behavior in the <<vertexpostproc-clipping, Primitive Clipping>> section to allow for pop-free behavior. The ability to check for which behavior is implemented may be added a future feature or extension (public issue 113). * Unify the discussions of implicit ordering throughout the spec, in particular in the new sections <<drawing-primitive-order, Primitive Order>>, <<primrast-order, Rasterization Order>>, and <<synchronization-implicit, Implicit Synchronization Guarantees>>; the discussion of <<synchronization-submission-order, submission order>>; and references elsewhere to these sections (public issue 133). * Clarify \<\<descriptorsets-compatibility,Pipeline Layout Compatibility>> language and introduce the term ``identically defined'' (public issue 164). * Add a dependency to the +VK_EXT_debug_marker+ extension that's needed to reuse the object type enum from +VK_EXT_debug_report+, and moves the definition of that enum into +VK_EXT_debug_report+ where it should be (public issue 409). * Remove redundant valid usage statement from slink:VkImageBlit (public issue 421). * Update GL_KHR_vulkan_glsl to allow the ternary operator to result in a specialization constant (public issue 424). * Fix valid usage for flink:VkPipelineShaderStageCreateInfo (public issue 426). * Correct typo in New Objects list for <<VK_EXT_debug_report>> (public issue 447). Internal Issues: * Moved to asciidoctor for spec builds (internal issue 121). * Update style guide to describe where to put new extensions-specific asciidoc files, and what to name them (internal issue 626). * Add src/spec/indexExt.py to autogenerate registry index entries linking into the 1.0-extensions specification, instead of maintaining the index manually. (internal issue 642). * Autogenerate extension dependencies and lists of all extensions and all KHR extensions from the "supported" attributes in +vk.xml+. Execute +make config/extDependency.sh+ from +doc/specs/vulkan+ when a supported extension is added to vk.xml, to regenerate the dependency script. The consequence is that specifying a single extension to the +makeExt+ script will automatically enable all extensions it depends on as well, and that the +makeAllExts+ and +makeKHR+ scripts do not need to be updated when a new extension is supported (internal issue 648). * Put extension appendices all at the same asciidoc section level, so KHR WSI extensions show up in the HTML index (internal issue 648). Other Issues: * Imbed images in the generated HTML specs instead of loading them from the images/ directory. * Fix missing EXT in extension name (ename:VK_EXT_SWAPCHAIN_COLOR_SPACE_EXTENSION_NAME). * Add new +VK_EXT_SMPTE_2086_metadata+ extension. * In the <<platformCreateSurface_xlib,Xlib Surface>> section of the +VK_KHR_xlib_surface+ specification, add language warning users that they always need to call code:XinitThreads. * Use the term "presentable image" (rather than "swapchain image") consistently in +VK_KHR_swapchain+ and related extensions, and add a glossary term defining it. * Relocate the valid usage for samples of flink:vkGetPhysicalDeviceSparseImageFormatProperties2KHR::pname:pFormatInfo to be below the flink:VkPhysicalDeviceSparseImageFormatInfo2KHR structure.
2017-02-11 04:37:39 +00:00
\begin{aligned}
Change log for January 23, 2017 Vulkan 1.0.39 spec update: * Bump API patch number and header version number to 39 for this update. Github Issues: * Clarified that only accesses via the specified buffer/image subresource ranges are included in the access scopes (public issue 306). * Add missing valid usage statements for flink:vkCreateComputePipelines and flink:vkCreateGraphicsPipelines (public issue 427). Internal Issues: * Add a Note to the <<invariance,Invariance>> appendix about a difference between OpenGL and Vulkan with regards to how primitives derived from offsets are handled (internal issue 355). * Add the +<<VK_KHR_get_physical_device_properties2>>+, +<<VK_KHR_maintenance1>>+, and +<<VK_KHR_shader_draw_parameters>>+ extensions (internal issue 448). * Add the +<<VK_EXT_shader_subgroup_vote>>+ and +<<VK_EXT_shader_subgroup_ballot>>+ extensions (internal issue 449). * Update the texture level-of-detail equation in the <<textures-scale-factor,Scale Factor Operation>> section to better approximate the ellipse major and minor axes (internal issue 547). * Forbid non-explicitly allowed uses of interface decorations in the introduction to the <<interfaces,Shader Interfaces>> chapter (internal issue 607). * Replace use of MathJax with KaTeX, for improved load-time performance as well as avoiding the scrolling-and-scrolling behavior due to MathJax asynchronous rendering when loading at an anchor inside the spec. This change also requires moving to HTML5 output for the spec instead of XHTML, and there is a visible difference in that the chapter navigation index is now in a scrollable sidebar instead of at the top of the document. We may or may not retain the nav sidebar based on feedback (internal issue 613). * Improve consistency of markup and formatting in extension appendices (internal issue 631). Other Issues: * Add explicit valid usage statements to slink:VkImageCopy requiring that the source and destination layer ranges be contained in their respective source and destination images. * Add valid usage language for swapchain of flink:vkAcquireNextImage. If the swapchain has been replaced, then it should not be passed to flink:vkAcquireNextImage. * Add a valid usage statement to flink:vkCreateImageView, that the image must have been created with an appropriate usage bit set. * Noted that slink:VkDisplayPresentInfoKHR is a valid extension of slink:VkPresentInfoKHR in the <<wsi_swapchain,WSI Swapchain>> section. * Update valid usage for flink:vkCmdSetViewport and flink:vkCmdSetScissor to account for the multiple viewport feature. If the feature is not enabled, the parameters for these functions have required values that are defined in the <<features-features-multiViewport,multiple viewports>> section of the spec but were not reflected in the valid usage text for these functions. * Add the +<<VK_EXT_swapchain_colorspace>>+ extension defining common color spaces.
2017-01-18 04:11:25 +00:00
d_{hi} & =
\begin{cases}
q, & level_{base} + \lambda \geq q \\
\left \lfloor level_{base}+\lambda \right \rfloor, & \text{otherwise}
\end{cases} \\
d_{lo} & =
\begin{cases}
q, & level_{base} + \lambda \geq q \\
d_{hi}+1, & \text{otherwise}
\end{cases}
Change log for February 10, 2017 Vulkan 1.0.40 spec update: * Bump API patch number and header version number to 40 for this update. * There is a major build change in this release. We are now using the Ruby-based ``asciidoctor'' implementation, rather than the Python-based ``asciidoc'' implementation, to process the specification. While the actual specification markup changes were minimal, this requires a new set of build tools and a very different installation process, especially because we now use an experimental direct-to-PDF backend for Asciidoctor instead of Docbook->dblatex->PDF. It is no longer possible to build the Specification using asciidoc. See doc/specs/vulkan/README.adoc for some guidance on installing the new toolchain components. * There are some minor rendering issues in the PDF output due to teething problems with the asciidoctor toolchain, especially with mathematical equations. We are aware of these and working on them. Github Issues: * Updated sample code for the <<sparsememory-examples-basic,sparse resource binding example>> (public issue 97). * Modify line and point clipping behavior in the <<vertexpostproc-clipping, Primitive Clipping>> section to allow for pop-free behavior. The ability to check for which behavior is implemented may be added a future feature or extension (public issue 113). * Unify the discussions of implicit ordering throughout the spec, in particular in the new sections <<drawing-primitive-order, Primitive Order>>, <<primrast-order, Rasterization Order>>, and <<synchronization-implicit, Implicit Synchronization Guarantees>>; the discussion of <<synchronization-submission-order, submission order>>; and references elsewhere to these sections (public issue 133). * Clarify \<\<descriptorsets-compatibility,Pipeline Layout Compatibility>> language and introduce the term ``identically defined'' (public issue 164). * Add a dependency to the +VK_EXT_debug_marker+ extension that's needed to reuse the object type enum from +VK_EXT_debug_report+, and moves the definition of that enum into +VK_EXT_debug_report+ where it should be (public issue 409). * Remove redundant valid usage statement from slink:VkImageBlit (public issue 421). * Update GL_KHR_vulkan_glsl to allow the ternary operator to result in a specialization constant (public issue 424). * Fix valid usage for flink:VkPipelineShaderStageCreateInfo (public issue 426). * Correct typo in New Objects list for <<VK_EXT_debug_report>> (public issue 447). Internal Issues: * Moved to asciidoctor for spec builds (internal issue 121). * Update style guide to describe where to put new extensions-specific asciidoc files, and what to name them (internal issue 626). * Add src/spec/indexExt.py to autogenerate registry index entries linking into the 1.0-extensions specification, instead of maintaining the index manually. (internal issue 642). * Autogenerate extension dependencies and lists of all extensions and all KHR extensions from the "supported" attributes in +vk.xml+. Execute +make config/extDependency.sh+ from +doc/specs/vulkan+ when a supported extension is added to vk.xml, to regenerate the dependency script. The consequence is that specifying a single extension to the +makeExt+ script will automatically enable all extensions it depends on as well, and that the +makeAllExts+ and +makeKHR+ scripts do not need to be updated when a new extension is supported (internal issue 648). * Put extension appendices all at the same asciidoc section level, so KHR WSI extensions show up in the HTML index (internal issue 648). Other Issues: * Imbed images in the generated HTML specs instead of loading them from the images/ directory. * Fix missing EXT in extension name (ename:VK_EXT_SWAPCHAIN_COLOR_SPACE_EXTENSION_NAME). * Add new +VK_EXT_SMPTE_2086_metadata+ extension. * In the <<platformCreateSurface_xlib,Xlib Surface>> section of the +VK_KHR_xlib_surface+ specification, add language warning users that they always need to call code:XinitThreads. * Use the term "presentable image" (rather than "swapchain image") consistently in +VK_KHR_swapchain+ and related extensions, and add a glossary term defining it. * Relocate the valid usage for samples of flink:vkGetPhysicalDeviceSparseImageFormatProperties2KHR::pname:pFormatInfo to be below the flink:VkPhysicalDeviceSparseImageFormatInfo2KHR structure.
2017-02-11 04:37:39 +00:00
\end{aligned}
Change log for January 23, 2017 Vulkan 1.0.39 spec update: * Bump API patch number and header version number to 39 for this update. Github Issues: * Clarified that only accesses via the specified buffer/image subresource ranges are included in the access scopes (public issue 306). * Add missing valid usage statements for flink:vkCreateComputePipelines and flink:vkCreateGraphicsPipelines (public issue 427). Internal Issues: * Add a Note to the <<invariance,Invariance>> appendix about a difference between OpenGL and Vulkan with regards to how primitives derived from offsets are handled (internal issue 355). * Add the +<<VK_KHR_get_physical_device_properties2>>+, +<<VK_KHR_maintenance1>>+, and +<<VK_KHR_shader_draw_parameters>>+ extensions (internal issue 448). * Add the +<<VK_EXT_shader_subgroup_vote>>+ and +<<VK_EXT_shader_subgroup_ballot>>+ extensions (internal issue 449). * Update the texture level-of-detail equation in the <<textures-scale-factor,Scale Factor Operation>> section to better approximate the ellipse major and minor axes (internal issue 547). * Forbid non-explicitly allowed uses of interface decorations in the introduction to the <<interfaces,Shader Interfaces>> chapter (internal issue 607). * Replace use of MathJax with KaTeX, for improved load-time performance as well as avoiding the scrolling-and-scrolling behavior due to MathJax asynchronous rendering when loading at an anchor inside the spec. This change also requires moving to HTML5 output for the spec instead of XHTML, and there is a visible difference in that the chapter navigation index is now in a scrollable sidebar instead of at the top of the document. We may or may not retain the nav sidebar based on feedback (internal issue 613). * Improve consistency of markup and formatting in extension appendices (internal issue 631). Other Issues: * Add explicit valid usage statements to slink:VkImageCopy requiring that the source and destination layer ranges be contained in their respective source and destination images. * Add valid usage language for swapchain of flink:vkAcquireNextImage. If the swapchain has been replaced, then it should not be passed to flink:vkAcquireNextImage. * Add a valid usage statement to flink:vkCreateImageView, that the image must have been created with an appropriate usage bit set. * Noted that slink:VkDisplayPresentInfoKHR is a valid extension of slink:VkPresentInfoKHR in the <<wsi_swapchain,WSI Swapchain>> section. * Update valid usage for flink:vkCmdSetViewport and flink:vkCmdSetScissor to account for the multiple viewport feature. If the feature is not enabled, the parameters for these functions have required values that are defined in the <<features-features-multiViewport,multiple viewports>> section of the spec but were not reflected in the valid usage text for these functions. * Add the +<<VK_EXT_swapchain_colorspace>>+ extension defining common color spaces.
2017-01-18 04:11:25 +00:00
++++++++++++++++++++++++
=== latexmath block 44
[latexmath]
++++++++++++++++++++++++
Change log for February 10, 2017 Vulkan 1.0.40 spec update: * Bump API patch number and header version number to 40 for this update. * There is a major build change in this release. We are now using the Ruby-based ``asciidoctor'' implementation, rather than the Python-based ``asciidoc'' implementation, to process the specification. While the actual specification markup changes were minimal, this requires a new set of build tools and a very different installation process, especially because we now use an experimental direct-to-PDF backend for Asciidoctor instead of Docbook->dblatex->PDF. It is no longer possible to build the Specification using asciidoc. See doc/specs/vulkan/README.adoc for some guidance on installing the new toolchain components. * There are some minor rendering issues in the PDF output due to teething problems with the asciidoctor toolchain, especially with mathematical equations. We are aware of these and working on them. Github Issues: * Updated sample code for the <<sparsememory-examples-basic,sparse resource binding example>> (public issue 97). * Modify line and point clipping behavior in the <<vertexpostproc-clipping, Primitive Clipping>> section to allow for pop-free behavior. The ability to check for which behavior is implemented may be added a future feature or extension (public issue 113). * Unify the discussions of implicit ordering throughout the spec, in particular in the new sections <<drawing-primitive-order, Primitive Order>>, <<primrast-order, Rasterization Order>>, and <<synchronization-implicit, Implicit Synchronization Guarantees>>; the discussion of <<synchronization-submission-order, submission order>>; and references elsewhere to these sections (public issue 133). * Clarify \<\<descriptorsets-compatibility,Pipeline Layout Compatibility>> language and introduce the term ``identically defined'' (public issue 164). * Add a dependency to the +VK_EXT_debug_marker+ extension that's needed to reuse the object type enum from +VK_EXT_debug_report+, and moves the definition of that enum into +VK_EXT_debug_report+ where it should be (public issue 409). * Remove redundant valid usage statement from slink:VkImageBlit (public issue 421). * Update GL_KHR_vulkan_glsl to allow the ternary operator to result in a specialization constant (public issue 424). * Fix valid usage for flink:VkPipelineShaderStageCreateInfo (public issue 426). * Correct typo in New Objects list for <<VK_EXT_debug_report>> (public issue 447). Internal Issues: * Moved to asciidoctor for spec builds (internal issue 121). * Update style guide to describe where to put new extensions-specific asciidoc files, and what to name them (internal issue 626). * Add src/spec/indexExt.py to autogenerate registry index entries linking into the 1.0-extensions specification, instead of maintaining the index manually. (internal issue 642). * Autogenerate extension dependencies and lists of all extensions and all KHR extensions from the "supported" attributes in +vk.xml+. Execute +make config/extDependency.sh+ from +doc/specs/vulkan+ when a supported extension is added to vk.xml, to regenerate the dependency script. The consequence is that specifying a single extension to the +makeExt+ script will automatically enable all extensions it depends on as well, and that the +makeAllExts+ and +makeKHR+ scripts do not need to be updated when a new extension is supported (internal issue 648). * Put extension appendices all at the same asciidoc section level, so KHR WSI extensions show up in the HTML index (internal issue 648). Other Issues: * Imbed images in the generated HTML specs instead of loading them from the images/ directory. * Fix missing EXT in extension name (ename:VK_EXT_SWAPCHAIN_COLOR_SPACE_EXTENSION_NAME). * Add new +VK_EXT_SMPTE_2086_metadata+ extension. * In the <<platformCreateSurface_xlib,Xlib Surface>> section of the +VK_KHR_xlib_surface+ specification, add language warning users that they always need to call code:XinitThreads. * Use the term "presentable image" (rather than "swapchain image") consistently in +VK_KHR_swapchain+ and related extensions, and add a glossary term defining it. * Relocate the valid usage for samples of flink:vkGetPhysicalDeviceSparseImageFormatProperties2KHR::pname:pFormatInfo to be below the flink:VkPhysicalDeviceSparseImageFormatInfo2KHR structure.
2017-02-11 04:37:39 +00:00
\begin{aligned}
Change log for January 23, 2017 Vulkan 1.0.39 spec update: * Bump API patch number and header version number to 39 for this update. Github Issues: * Clarified that only accesses via the specified buffer/image subresource ranges are included in the access scopes (public issue 306). * Add missing valid usage statements for flink:vkCreateComputePipelines and flink:vkCreateGraphicsPipelines (public issue 427). Internal Issues: * Add a Note to the <<invariance,Invariance>> appendix about a difference between OpenGL and Vulkan with regards to how primitives derived from offsets are handled (internal issue 355). * Add the +<<VK_KHR_get_physical_device_properties2>>+, +<<VK_KHR_maintenance1>>+, and +<<VK_KHR_shader_draw_parameters>>+ extensions (internal issue 448). * Add the +<<VK_EXT_shader_subgroup_vote>>+ and +<<VK_EXT_shader_subgroup_ballot>>+ extensions (internal issue 449). * Update the texture level-of-detail equation in the <<textures-scale-factor,Scale Factor Operation>> section to better approximate the ellipse major and minor axes (internal issue 547). * Forbid non-explicitly allowed uses of interface decorations in the introduction to the <<interfaces,Shader Interfaces>> chapter (internal issue 607). * Replace use of MathJax with KaTeX, for improved load-time performance as well as avoiding the scrolling-and-scrolling behavior due to MathJax asynchronous rendering when loading at an anchor inside the spec. This change also requires moving to HTML5 output for the spec instead of XHTML, and there is a visible difference in that the chapter navigation index is now in a scrollable sidebar instead of at the top of the document. We may or may not retain the nav sidebar based on feedback (internal issue 613). * Improve consistency of markup and formatting in extension appendices (internal issue 631). Other Issues: * Add explicit valid usage statements to slink:VkImageCopy requiring that the source and destination layer ranges be contained in their respective source and destination images. * Add valid usage language for swapchain of flink:vkAcquireNextImage. If the swapchain has been replaced, then it should not be passed to flink:vkAcquireNextImage. * Add a valid usage statement to flink:vkCreateImageView, that the image must have been created with an appropriate usage bit set. * Noted that slink:VkDisplayPresentInfoKHR is a valid extension of slink:VkPresentInfoKHR in the <<wsi_swapchain,WSI Swapchain>> section. * Update valid usage for flink:vkCmdSetViewport and flink:vkCmdSetScissor to account for the multiple viewport feature. If the feature is not enabled, the parameters for these functions have required values that are defined in the <<features-features-multiViewport,multiple viewports>> section of the spec but were not reflected in the valid usage text for these functions. * Add the +<<VK_EXT_swapchain_colorspace>>+ extension defining common color spaces.
2017-01-18 04:11:25 +00:00
u(x,y) & = s(x,y) \times width_{level} \\
v(x,y) & =
\begin{cases}
0 & \text{for 1D images} \\
t(x,y) \times height_{level} & \text{otherwise}
\end{cases} \\
w(x,y) & =
\begin{cases}
0 & \text{for 2D or Cube images} \\
r(x,y) \times depth_{level} & \text{otherwise}
\end{cases} \\
\\
a(x,y) & =
\begin{cases}
a(x,y) & \text{for array images} \\
0 & \text{otherwise}
\end{cases}
Change log for February 10, 2017 Vulkan 1.0.40 spec update: * Bump API patch number and header version number to 40 for this update. * There is a major build change in this release. We are now using the Ruby-based ``asciidoctor'' implementation, rather than the Python-based ``asciidoc'' implementation, to process the specification. While the actual specification markup changes were minimal, this requires a new set of build tools and a very different installation process, especially because we now use an experimental direct-to-PDF backend for Asciidoctor instead of Docbook->dblatex->PDF. It is no longer possible to build the Specification using asciidoc. See doc/specs/vulkan/README.adoc for some guidance on installing the new toolchain components. * There are some minor rendering issues in the PDF output due to teething problems with the asciidoctor toolchain, especially with mathematical equations. We are aware of these and working on them. Github Issues: * Updated sample code for the <<sparsememory-examples-basic,sparse resource binding example>> (public issue 97). * Modify line and point clipping behavior in the <<vertexpostproc-clipping, Primitive Clipping>> section to allow for pop-free behavior. The ability to check for which behavior is implemented may be added a future feature or extension (public issue 113). * Unify the discussions of implicit ordering throughout the spec, in particular in the new sections <<drawing-primitive-order, Primitive Order>>, <<primrast-order, Rasterization Order>>, and <<synchronization-implicit, Implicit Synchronization Guarantees>>; the discussion of <<synchronization-submission-order, submission order>>; and references elsewhere to these sections (public issue 133). * Clarify \<\<descriptorsets-compatibility,Pipeline Layout Compatibility>> language and introduce the term ``identically defined'' (public issue 164). * Add a dependency to the +VK_EXT_debug_marker+ extension that's needed to reuse the object type enum from +VK_EXT_debug_report+, and moves the definition of that enum into +VK_EXT_debug_report+ where it should be (public issue 409). * Remove redundant valid usage statement from slink:VkImageBlit (public issue 421). * Update GL_KHR_vulkan_glsl to allow the ternary operator to result in a specialization constant (public issue 424). * Fix valid usage for flink:VkPipelineShaderStageCreateInfo (public issue 426). * Correct typo in New Objects list for <<VK_EXT_debug_report>> (public issue 447). Internal Issues: * Moved to asciidoctor for spec builds (internal issue 121). * Update style guide to describe where to put new extensions-specific asciidoc files, and what to name them (internal issue 626). * Add src/spec/indexExt.py to autogenerate registry index entries linking into the 1.0-extensions specification, instead of maintaining the index manually. (internal issue 642). * Autogenerate extension dependencies and lists of all extensions and all KHR extensions from the "supported" attributes in +vk.xml+. Execute +make config/extDependency.sh+ from +doc/specs/vulkan+ when a supported extension is added to vk.xml, to regenerate the dependency script. The consequence is that specifying a single extension to the +makeExt+ script will automatically enable all extensions it depends on as well, and that the +makeAllExts+ and +makeKHR+ scripts do not need to be updated when a new extension is supported (internal issue 648). * Put extension appendices all at the same asciidoc section level, so KHR WSI extensions show up in the HTML index (internal issue 648). Other Issues: * Imbed images in the generated HTML specs instead of loading them from the images/ directory. * Fix missing EXT in extension name (ename:VK_EXT_SWAPCHAIN_COLOR_SPACE_EXTENSION_NAME). * Add new +VK_EXT_SMPTE_2086_metadata+ extension. * In the <<platformCreateSurface_xlib,Xlib Surface>> section of the +VK_KHR_xlib_surface+ specification, add language warning users that they always need to call code:XinitThreads. * Use the term "presentable image" (rather than "swapchain image") consistently in +VK_KHR_swapchain+ and related extensions, and add a glossary term defining it. * Relocate the valid usage for samples of flink:vkGetPhysicalDeviceSparseImageFormatProperties2KHR::pname:pFormatInfo to be below the flink:VkPhysicalDeviceSparseImageFormatInfo2KHR structure.
2017-02-11 04:37:39 +00:00
\end{aligned}
Change log for January 23, 2017 Vulkan 1.0.39 spec update: * Bump API patch number and header version number to 39 for this update. Github Issues: * Clarified that only accesses via the specified buffer/image subresource ranges are included in the access scopes (public issue 306). * Add missing valid usage statements for flink:vkCreateComputePipelines and flink:vkCreateGraphicsPipelines (public issue 427). Internal Issues: * Add a Note to the <<invariance,Invariance>> appendix about a difference between OpenGL and Vulkan with regards to how primitives derived from offsets are handled (internal issue 355). * Add the +<<VK_KHR_get_physical_device_properties2>>+, +<<VK_KHR_maintenance1>>+, and +<<VK_KHR_shader_draw_parameters>>+ extensions (internal issue 448). * Add the +<<VK_EXT_shader_subgroup_vote>>+ and +<<VK_EXT_shader_subgroup_ballot>>+ extensions (internal issue 449). * Update the texture level-of-detail equation in the <<textures-scale-factor,Scale Factor Operation>> section to better approximate the ellipse major and minor axes (internal issue 547). * Forbid non-explicitly allowed uses of interface decorations in the introduction to the <<interfaces,Shader Interfaces>> chapter (internal issue 607). * Replace use of MathJax with KaTeX, for improved load-time performance as well as avoiding the scrolling-and-scrolling behavior due to MathJax asynchronous rendering when loading at an anchor inside the spec. This change also requires moving to HTML5 output for the spec instead of XHTML, and there is a visible difference in that the chapter navigation index is now in a scrollable sidebar instead of at the top of the document. We may or may not retain the nav sidebar based on feedback (internal issue 613). * Improve consistency of markup and formatting in extension appendices (internal issue 631). Other Issues: * Add explicit valid usage statements to slink:VkImageCopy requiring that the source and destination layer ranges be contained in their respective source and destination images. * Add valid usage language for swapchain of flink:vkAcquireNextImage. If the swapchain has been replaced, then it should not be passed to flink:vkAcquireNextImage. * Add a valid usage statement to flink:vkCreateImageView, that the image must have been created with an appropriate usage bit set. * Noted that slink:VkDisplayPresentInfoKHR is a valid extension of slink:VkPresentInfoKHR in the <<wsi_swapchain,WSI Swapchain>> section. * Update valid usage for flink:vkCmdSetViewport and flink:vkCmdSetScissor to account for the multiple viewport feature. If the feature is not enabled, the parameters for these functions have required values that are defined in the <<features-features-multiViewport,multiple viewports>> section of the spec but were not reflected in the valid usage text for these functions. * Add the +<<VK_EXT_swapchain_colorspace>>+ extension defining common color spaces.
2017-01-18 04:11:25 +00:00
++++++++++++++++++++++++
=== latexmath block 45
[latexmath]
++++++++++++++++++++++++
Change log for February 10, 2017 Vulkan 1.0.40 spec update: * Bump API patch number and header version number to 40 for this update. * There is a major build change in this release. We are now using the Ruby-based ``asciidoctor'' implementation, rather than the Python-based ``asciidoc'' implementation, to process the specification. While the actual specification markup changes were minimal, this requires a new set of build tools and a very different installation process, especially because we now use an experimental direct-to-PDF backend for Asciidoctor instead of Docbook->dblatex->PDF. It is no longer possible to build the Specification using asciidoc. See doc/specs/vulkan/README.adoc for some guidance on installing the new toolchain components. * There are some minor rendering issues in the PDF output due to teething problems with the asciidoctor toolchain, especially with mathematical equations. We are aware of these and working on them. Github Issues: * Updated sample code for the <<sparsememory-examples-basic,sparse resource binding example>> (public issue 97). * Modify line and point clipping behavior in the <<vertexpostproc-clipping, Primitive Clipping>> section to allow for pop-free behavior. The ability to check for which behavior is implemented may be added a future feature or extension (public issue 113). * Unify the discussions of implicit ordering throughout the spec, in particular in the new sections <<drawing-primitive-order, Primitive Order>>, <<primrast-order, Rasterization Order>>, and <<synchronization-implicit, Implicit Synchronization Guarantees>>; the discussion of <<synchronization-submission-order, submission order>>; and references elsewhere to these sections (public issue 133). * Clarify \<\<descriptorsets-compatibility,Pipeline Layout Compatibility>> language and introduce the term ``identically defined'' (public issue 164). * Add a dependency to the +VK_EXT_debug_marker+ extension that's needed to reuse the object type enum from +VK_EXT_debug_report+, and moves the definition of that enum into +VK_EXT_debug_report+ where it should be (public issue 409). * Remove redundant valid usage statement from slink:VkImageBlit (public issue 421). * Update GL_KHR_vulkan_glsl to allow the ternary operator to result in a specialization constant (public issue 424). * Fix valid usage for flink:VkPipelineShaderStageCreateInfo (public issue 426). * Correct typo in New Objects list for <<VK_EXT_debug_report>> (public issue 447). Internal Issues: * Moved to asciidoctor for spec builds (internal issue 121). * Update style guide to describe where to put new extensions-specific asciidoc files, and what to name them (internal issue 626). * Add src/spec/indexExt.py to autogenerate registry index entries linking into the 1.0-extensions specification, instead of maintaining the index manually. (internal issue 642). * Autogenerate extension dependencies and lists of all extensions and all KHR extensions from the "supported" attributes in +vk.xml+. Execute +make config/extDependency.sh+ from +doc/specs/vulkan+ when a supported extension is added to vk.xml, to regenerate the dependency script. The consequence is that specifying a single extension to the +makeExt+ script will automatically enable all extensions it depends on as well, and that the +makeAllExts+ and +makeKHR+ scripts do not need to be updated when a new extension is supported (internal issue 648). * Put extension appendices all at the same asciidoc section level, so KHR WSI extensions show up in the HTML index (internal issue 648). Other Issues: * Imbed images in the generated HTML specs instead of loading them from the images/ directory. * Fix missing EXT in extension name (ename:VK_EXT_SWAPCHAIN_COLOR_SPACE_EXTENSION_NAME). * Add new +VK_EXT_SMPTE_2086_metadata+ extension. * In the <<platformCreateSurface_xlib,Xlib Surface>> section of the +VK_KHR_xlib_surface+ specification, add language warning users that they always need to call code:XinitThreads. * Use the term "presentable image" (rather than "swapchain image") consistently in +VK_KHR_swapchain+ and related extensions, and add a glossary term defining it. * Relocate the valid usage for samples of flink:vkGetPhysicalDeviceSparseImageFormatProperties2KHR::pname:pFormatInfo to be below the flink:VkPhysicalDeviceSparseImageFormatInfo2KHR structure.
2017-02-11 04:37:39 +00:00
\begin{aligned}
\mathbin{RNE}(a) & =
Change log for January 23, 2017 Vulkan 1.0.39 spec update: * Bump API patch number and header version number to 39 for this update. Github Issues: * Clarified that only accesses via the specified buffer/image subresource ranges are included in the access scopes (public issue 306). * Add missing valid usage statements for flink:vkCreateComputePipelines and flink:vkCreateGraphicsPipelines (public issue 427). Internal Issues: * Add a Note to the <<invariance,Invariance>> appendix about a difference between OpenGL and Vulkan with regards to how primitives derived from offsets are handled (internal issue 355). * Add the +<<VK_KHR_get_physical_device_properties2>>+, +<<VK_KHR_maintenance1>>+, and +<<VK_KHR_shader_draw_parameters>>+ extensions (internal issue 448). * Add the +<<VK_EXT_shader_subgroup_vote>>+ and +<<VK_EXT_shader_subgroup_ballot>>+ extensions (internal issue 449). * Update the texture level-of-detail equation in the <<textures-scale-factor,Scale Factor Operation>> section to better approximate the ellipse major and minor axes (internal issue 547). * Forbid non-explicitly allowed uses of interface decorations in the introduction to the <<interfaces,Shader Interfaces>> chapter (internal issue 607). * Replace use of MathJax with KaTeX, for improved load-time performance as well as avoiding the scrolling-and-scrolling behavior due to MathJax asynchronous rendering when loading at an anchor inside the spec. This change also requires moving to HTML5 output for the spec instead of XHTML, and there is a visible difference in that the chapter navigation index is now in a scrollable sidebar instead of at the top of the document. We may or may not retain the nav sidebar based on feedback (internal issue 613). * Improve consistency of markup and formatting in extension appendices (internal issue 631). Other Issues: * Add explicit valid usage statements to slink:VkImageCopy requiring that the source and destination layer ranges be contained in their respective source and destination images. * Add valid usage language for swapchain of flink:vkAcquireNextImage. If the swapchain has been replaced, then it should not be passed to flink:vkAcquireNextImage. * Add a valid usage statement to flink:vkCreateImageView, that the image must have been created with an appropriate usage bit set. * Noted that slink:VkDisplayPresentInfoKHR is a valid extension of slink:VkPresentInfoKHR in the <<wsi_swapchain,WSI Swapchain>> section. * Update valid usage for flink:vkCmdSetViewport and flink:vkCmdSetScissor to account for the multiple viewport feature. If the feature is not enabled, the parameters for these functions have required values that are defined in the <<features-features-multiViewport,multiple viewports>> section of the spec but were not reflected in the valid usage text for these functions. * Add the +<<VK_EXT_swapchain_colorspace>>+ extension defining common color spaces.
2017-01-18 04:11:25 +00:00
\begin{cases}
Change log for February 10, 2017 Vulkan 1.0.40 spec update: * Bump API patch number and header version number to 40 for this update. * There is a major build change in this release. We are now using the Ruby-based ``asciidoctor'' implementation, rather than the Python-based ``asciidoc'' implementation, to process the specification. While the actual specification markup changes were minimal, this requires a new set of build tools and a very different installation process, especially because we now use an experimental direct-to-PDF backend for Asciidoctor instead of Docbook->dblatex->PDF. It is no longer possible to build the Specification using asciidoc. See doc/specs/vulkan/README.adoc for some guidance on installing the new toolchain components. * There are some minor rendering issues in the PDF output due to teething problems with the asciidoctor toolchain, especially with mathematical equations. We are aware of these and working on them. Github Issues: * Updated sample code for the <<sparsememory-examples-basic,sparse resource binding example>> (public issue 97). * Modify line and point clipping behavior in the <<vertexpostproc-clipping, Primitive Clipping>> section to allow for pop-free behavior. The ability to check for which behavior is implemented may be added a future feature or extension (public issue 113). * Unify the discussions of implicit ordering throughout the spec, in particular in the new sections <<drawing-primitive-order, Primitive Order>>, <<primrast-order, Rasterization Order>>, and <<synchronization-implicit, Implicit Synchronization Guarantees>>; the discussion of <<synchronization-submission-order, submission order>>; and references elsewhere to these sections (public issue 133). * Clarify \<\<descriptorsets-compatibility,Pipeline Layout Compatibility>> language and introduce the term ``identically defined'' (public issue 164). * Add a dependency to the +VK_EXT_debug_marker+ extension that's needed to reuse the object type enum from +VK_EXT_debug_report+, and moves the definition of that enum into +VK_EXT_debug_report+ where it should be (public issue 409). * Remove redundant valid usage statement from slink:VkImageBlit (public issue 421). * Update GL_KHR_vulkan_glsl to allow the ternary operator to result in a specialization constant (public issue 424). * Fix valid usage for flink:VkPipelineShaderStageCreateInfo (public issue 426). * Correct typo in New Objects list for <<VK_EXT_debug_report>> (public issue 447). Internal Issues: * Moved to asciidoctor for spec builds (internal issue 121). * Update style guide to describe where to put new extensions-specific asciidoc files, and what to name them (internal issue 626). * Add src/spec/indexExt.py to autogenerate registry index entries linking into the 1.0-extensions specification, instead of maintaining the index manually. (internal issue 642). * Autogenerate extension dependencies and lists of all extensions and all KHR extensions from the "supported" attributes in +vk.xml+. Execute +make config/extDependency.sh+ from +doc/specs/vulkan+ when a supported extension is added to vk.xml, to regenerate the dependency script. The consequence is that specifying a single extension to the +makeExt+ script will automatically enable all extensions it depends on as well, and that the +makeAllExts+ and +makeKHR+ scripts do not need to be updated when a new extension is supported (internal issue 648). * Put extension appendices all at the same asciidoc section level, so KHR WSI extensions show up in the HTML index (internal issue 648). Other Issues: * Imbed images in the generated HTML specs instead of loading them from the images/ directory. * Fix missing EXT in extension name (ename:VK_EXT_SWAPCHAIN_COLOR_SPACE_EXTENSION_NAME). * Add new +VK_EXT_SMPTE_2086_metadata+ extension. * In the <<platformCreateSurface_xlib,Xlib Surface>> section of the +VK_KHR_xlib_surface+ specification, add language warning users that they always need to call code:XinitThreads. * Use the term "presentable image" (rather than "swapchain image") consistently in +VK_KHR_swapchain+ and related extensions, and add a glossary term defining it. * Relocate the valid usage for samples of flink:vkGetPhysicalDeviceSparseImageFormatProperties2KHR::pname:pFormatInfo to be below the flink:VkPhysicalDeviceSparseImageFormatInfo2KHR structure.
2017-02-11 04:37:39 +00:00
\mathbin{roundTiesToEven}(a) & \text{preferred, from IEEE Std 754-2008 Floating-Point Arithmetic} \\
Change log for January 23, 2017 Vulkan 1.0.39 spec update: * Bump API patch number and header version number to 39 for this update. Github Issues: * Clarified that only accesses via the specified buffer/image subresource ranges are included in the access scopes (public issue 306). * Add missing valid usage statements for flink:vkCreateComputePipelines and flink:vkCreateGraphicsPipelines (public issue 427). Internal Issues: * Add a Note to the <<invariance,Invariance>> appendix about a difference between OpenGL and Vulkan with regards to how primitives derived from offsets are handled (internal issue 355). * Add the +<<VK_KHR_get_physical_device_properties2>>+, +<<VK_KHR_maintenance1>>+, and +<<VK_KHR_shader_draw_parameters>>+ extensions (internal issue 448). * Add the +<<VK_EXT_shader_subgroup_vote>>+ and +<<VK_EXT_shader_subgroup_ballot>>+ extensions (internal issue 449). * Update the texture level-of-detail equation in the <<textures-scale-factor,Scale Factor Operation>> section to better approximate the ellipse major and minor axes (internal issue 547). * Forbid non-explicitly allowed uses of interface decorations in the introduction to the <<interfaces,Shader Interfaces>> chapter (internal issue 607). * Replace use of MathJax with KaTeX, for improved load-time performance as well as avoiding the scrolling-and-scrolling behavior due to MathJax asynchronous rendering when loading at an anchor inside the spec. This change also requires moving to HTML5 output for the spec instead of XHTML, and there is a visible difference in that the chapter navigation index is now in a scrollable sidebar instead of at the top of the document. We may or may not retain the nav sidebar based on feedback (internal issue 613). * Improve consistency of markup and formatting in extension appendices (internal issue 631). Other Issues: * Add explicit valid usage statements to slink:VkImageCopy requiring that the source and destination layer ranges be contained in their respective source and destination images. * Add valid usage language for swapchain of flink:vkAcquireNextImage. If the swapchain has been replaced, then it should not be passed to flink:vkAcquireNextImage. * Add a valid usage statement to flink:vkCreateImageView, that the image must have been created with an appropriate usage bit set. * Noted that slink:VkDisplayPresentInfoKHR is a valid extension of slink:VkPresentInfoKHR in the <<wsi_swapchain,WSI Swapchain>> section. * Update valid usage for flink:vkCmdSetViewport and flink:vkCmdSetScissor to account for the multiple viewport feature. If the feature is not enabled, the parameters for these functions have required values that are defined in the <<features-features-multiViewport,multiple viewports>> section of the spec but were not reflected in the valid usage text for these functions. * Add the +<<VK_EXT_swapchain_colorspace>>+ extension defining common color spaces.
2017-01-18 04:11:25 +00:00
\left \lfloor a + \frac{1}{2} \right \rfloor & \text{alternative}
\end{cases}
Change log for February 10, 2017 Vulkan 1.0.40 spec update: * Bump API patch number and header version number to 40 for this update. * There is a major build change in this release. We are now using the Ruby-based ``asciidoctor'' implementation, rather than the Python-based ``asciidoc'' implementation, to process the specification. While the actual specification markup changes were minimal, this requires a new set of build tools and a very different installation process, especially because we now use an experimental direct-to-PDF backend for Asciidoctor instead of Docbook->dblatex->PDF. It is no longer possible to build the Specification using asciidoc. See doc/specs/vulkan/README.adoc for some guidance on installing the new toolchain components. * There are some minor rendering issues in the PDF output due to teething problems with the asciidoctor toolchain, especially with mathematical equations. We are aware of these and working on them. Github Issues: * Updated sample code for the <<sparsememory-examples-basic,sparse resource binding example>> (public issue 97). * Modify line and point clipping behavior in the <<vertexpostproc-clipping, Primitive Clipping>> section to allow for pop-free behavior. The ability to check for which behavior is implemented may be added a future feature or extension (public issue 113). * Unify the discussions of implicit ordering throughout the spec, in particular in the new sections <<drawing-primitive-order, Primitive Order>>, <<primrast-order, Rasterization Order>>, and <<synchronization-implicit, Implicit Synchronization Guarantees>>; the discussion of <<synchronization-submission-order, submission order>>; and references elsewhere to these sections (public issue 133). * Clarify \<\<descriptorsets-compatibility,Pipeline Layout Compatibility>> language and introduce the term ``identically defined'' (public issue 164). * Add a dependency to the +VK_EXT_debug_marker+ extension that's needed to reuse the object type enum from +VK_EXT_debug_report+, and moves the definition of that enum into +VK_EXT_debug_report+ where it should be (public issue 409). * Remove redundant valid usage statement from slink:VkImageBlit (public issue 421). * Update GL_KHR_vulkan_glsl to allow the ternary operator to result in a specialization constant (public issue 424). * Fix valid usage for flink:VkPipelineShaderStageCreateInfo (public issue 426). * Correct typo in New Objects list for <<VK_EXT_debug_report>> (public issue 447). Internal Issues: * Moved to asciidoctor for spec builds (internal issue 121). * Update style guide to describe where to put new extensions-specific asciidoc files, and what to name them (internal issue 626). * Add src/spec/indexExt.py to autogenerate registry index entries linking into the 1.0-extensions specification, instead of maintaining the index manually. (internal issue 642). * Autogenerate extension dependencies and lists of all extensions and all KHR extensions from the "supported" attributes in +vk.xml+. Execute +make config/extDependency.sh+ from +doc/specs/vulkan+ when a supported extension is added to vk.xml, to regenerate the dependency script. The consequence is that specifying a single extension to the +makeExt+ script will automatically enable all extensions it depends on as well, and that the +makeAllExts+ and +makeKHR+ scripts do not need to be updated when a new extension is supported (internal issue 648). * Put extension appendices all at the same asciidoc section level, so KHR WSI extensions show up in the HTML index (internal issue 648). Other Issues: * Imbed images in the generated HTML specs instead of loading them from the images/ directory. * Fix missing EXT in extension name (ename:VK_EXT_SWAPCHAIN_COLOR_SPACE_EXTENSION_NAME). * Add new +VK_EXT_SMPTE_2086_metadata+ extension. * In the <<platformCreateSurface_xlib,Xlib Surface>> section of the +VK_KHR_xlib_surface+ specification, add language warning users that they always need to call code:XinitThreads. * Use the term "presentable image" (rather than "swapchain image") consistently in +VK_KHR_swapchain+ and related extensions, and add a glossary term defining it. * Relocate the valid usage for samples of flink:vkGetPhysicalDeviceSparseImageFormatProperties2KHR::pname:pFormatInfo to be below the flink:VkPhysicalDeviceSparseImageFormatInfo2KHR structure.
2017-02-11 04:37:39 +00:00
\end{aligned}
Change log for January 23, 2017 Vulkan 1.0.39 spec update: * Bump API patch number and header version number to 39 for this update. Github Issues: * Clarified that only accesses via the specified buffer/image subresource ranges are included in the access scopes (public issue 306). * Add missing valid usage statements for flink:vkCreateComputePipelines and flink:vkCreateGraphicsPipelines (public issue 427). Internal Issues: * Add a Note to the <<invariance,Invariance>> appendix about a difference between OpenGL and Vulkan with regards to how primitives derived from offsets are handled (internal issue 355). * Add the +<<VK_KHR_get_physical_device_properties2>>+, +<<VK_KHR_maintenance1>>+, and +<<VK_KHR_shader_draw_parameters>>+ extensions (internal issue 448). * Add the +<<VK_EXT_shader_subgroup_vote>>+ and +<<VK_EXT_shader_subgroup_ballot>>+ extensions (internal issue 449). * Update the texture level-of-detail equation in the <<textures-scale-factor,Scale Factor Operation>> section to better approximate the ellipse major and minor axes (internal issue 547). * Forbid non-explicitly allowed uses of interface decorations in the introduction to the <<interfaces,Shader Interfaces>> chapter (internal issue 607). * Replace use of MathJax with KaTeX, for improved load-time performance as well as avoiding the scrolling-and-scrolling behavior due to MathJax asynchronous rendering when loading at an anchor inside the spec. This change also requires moving to HTML5 output for the spec instead of XHTML, and there is a visible difference in that the chapter navigation index is now in a scrollable sidebar instead of at the top of the document. We may or may not retain the nav sidebar based on feedback (internal issue 613). * Improve consistency of markup and formatting in extension appendices (internal issue 631). Other Issues: * Add explicit valid usage statements to slink:VkImageCopy requiring that the source and destination layer ranges be contained in their respective source and destination images. * Add valid usage language for swapchain of flink:vkAcquireNextImage. If the swapchain has been replaced, then it should not be passed to flink:vkAcquireNextImage. * Add a valid usage statement to flink:vkCreateImageView, that the image must have been created with an appropriate usage bit set. * Noted that slink:VkDisplayPresentInfoKHR is a valid extension of slink:VkPresentInfoKHR in the <<wsi_swapchain,WSI Swapchain>> section. * Update valid usage for flink:vkCmdSetViewport and flink:vkCmdSetScissor to account for the multiple viewport feature. If the feature is not enabled, the parameters for these functions have required values that are defined in the <<features-features-multiViewport,multiple viewports>> section of the spec but were not reflected in the valid usage text for these functions. * Add the +<<VK_EXT_swapchain_colorspace>>+ extension defining common color spaces.
2017-01-18 04:11:25 +00:00
++++++++++++++++++++++++
=== latexmath block 46
[latexmath]
++++++++++++++++++++++++
Change log for February 10, 2017 Vulkan 1.0.40 spec update: * Bump API patch number and header version number to 40 for this update. * There is a major build change in this release. We are now using the Ruby-based ``asciidoctor'' implementation, rather than the Python-based ``asciidoc'' implementation, to process the specification. While the actual specification markup changes were minimal, this requires a new set of build tools and a very different installation process, especially because we now use an experimental direct-to-PDF backend for Asciidoctor instead of Docbook->dblatex->PDF. It is no longer possible to build the Specification using asciidoc. See doc/specs/vulkan/README.adoc for some guidance on installing the new toolchain components. * There are some minor rendering issues in the PDF output due to teething problems with the asciidoctor toolchain, especially with mathematical equations. We are aware of these and working on them. Github Issues: * Updated sample code for the <<sparsememory-examples-basic,sparse resource binding example>> (public issue 97). * Modify line and point clipping behavior in the <<vertexpostproc-clipping, Primitive Clipping>> section to allow for pop-free behavior. The ability to check for which behavior is implemented may be added a future feature or extension (public issue 113). * Unify the discussions of implicit ordering throughout the spec, in particular in the new sections <<drawing-primitive-order, Primitive Order>>, <<primrast-order, Rasterization Order>>, and <<synchronization-implicit, Implicit Synchronization Guarantees>>; the discussion of <<synchronization-submission-order, submission order>>; and references elsewhere to these sections (public issue 133). * Clarify \<\<descriptorsets-compatibility,Pipeline Layout Compatibility>> language and introduce the term ``identically defined'' (public issue 164). * Add a dependency to the +VK_EXT_debug_marker+ extension that's needed to reuse the object type enum from +VK_EXT_debug_report+, and moves the definition of that enum into +VK_EXT_debug_report+ where it should be (public issue 409). * Remove redundant valid usage statement from slink:VkImageBlit (public issue 421). * Update GL_KHR_vulkan_glsl to allow the ternary operator to result in a specialization constant (public issue 424). * Fix valid usage for flink:VkPipelineShaderStageCreateInfo (public issue 426). * Correct typo in New Objects list for <<VK_EXT_debug_report>> (public issue 447). Internal Issues: * Moved to asciidoctor for spec builds (internal issue 121). * Update style guide to describe where to put new extensions-specific asciidoc files, and what to name them (internal issue 626). * Add src/spec/indexExt.py to autogenerate registry index entries linking into the 1.0-extensions specification, instead of maintaining the index manually. (internal issue 642). * Autogenerate extension dependencies and lists of all extensions and all KHR extensions from the "supported" attributes in +vk.xml+. Execute +make config/extDependency.sh+ from +doc/specs/vulkan+ when a supported extension is added to vk.xml, to regenerate the dependency script. The consequence is that specifying a single extension to the +makeExt+ script will automatically enable all extensions it depends on as well, and that the +makeAllExts+ and +makeKHR+ scripts do not need to be updated when a new extension is supported (internal issue 648). * Put extension appendices all at the same asciidoc section level, so KHR WSI extensions show up in the HTML index (internal issue 648). Other Issues: * Imbed images in the generated HTML specs instead of loading them from the images/ directory. * Fix missing EXT in extension name (ename:VK_EXT_SWAPCHAIN_COLOR_SPACE_EXTENSION_NAME). * Add new +VK_EXT_SMPTE_2086_metadata+ extension. * In the <<platformCreateSurface_xlib,Xlib Surface>> section of the +VK_KHR_xlib_surface+ specification, add language warning users that they always need to call code:XinitThreads. * Use the term "presentable image" (rather than "swapchain image") consistently in +VK_KHR_swapchain+ and related extensions, and add a glossary term defining it. * Relocate the valid usage for samples of flink:vkGetPhysicalDeviceSparseImageFormatProperties2KHR::pname:pFormatInfo to be below the flink:VkPhysicalDeviceSparseImageFormatInfo2KHR structure.
2017-02-11 04:37:39 +00:00
\begin{aligned}
Change log for January 23, 2017 Vulkan 1.0.39 spec update: * Bump API patch number and header version number to 39 for this update. Github Issues: * Clarified that only accesses via the specified buffer/image subresource ranges are included in the access scopes (public issue 306). * Add missing valid usage statements for flink:vkCreateComputePipelines and flink:vkCreateGraphicsPipelines (public issue 427). Internal Issues: * Add a Note to the <<invariance,Invariance>> appendix about a difference between OpenGL and Vulkan with regards to how primitives derived from offsets are handled (internal issue 355). * Add the +<<VK_KHR_get_physical_device_properties2>>+, +<<VK_KHR_maintenance1>>+, and +<<VK_KHR_shader_draw_parameters>>+ extensions (internal issue 448). * Add the +<<VK_EXT_shader_subgroup_vote>>+ and +<<VK_EXT_shader_subgroup_ballot>>+ extensions (internal issue 449). * Update the texture level-of-detail equation in the <<textures-scale-factor,Scale Factor Operation>> section to better approximate the ellipse major and minor axes (internal issue 547). * Forbid non-explicitly allowed uses of interface decorations in the introduction to the <<interfaces,Shader Interfaces>> chapter (internal issue 607). * Replace use of MathJax with KaTeX, for improved load-time performance as well as avoiding the scrolling-and-scrolling behavior due to MathJax asynchronous rendering when loading at an anchor inside the spec. This change also requires moving to HTML5 output for the spec instead of XHTML, and there is a visible difference in that the chapter navigation index is now in a scrollable sidebar instead of at the top of the document. We may or may not retain the nav sidebar based on feedback (internal issue 613). * Improve consistency of markup and formatting in extension appendices (internal issue 631). Other Issues: * Add explicit valid usage statements to slink:VkImageCopy requiring that the source and destination layer ranges be contained in their respective source and destination images. * Add valid usage language for swapchain of flink:vkAcquireNextImage. If the swapchain has been replaced, then it should not be passed to flink:vkAcquireNextImage. * Add a valid usage statement to flink:vkCreateImageView, that the image must have been created with an appropriate usage bit set. * Noted that slink:VkDisplayPresentInfoKHR is a valid extension of slink:VkPresentInfoKHR in the <<wsi_swapchain,WSI Swapchain>> section. * Update valid usage for flink:vkCmdSetViewport and flink:vkCmdSetScissor to account for the multiple viewport feature. If the feature is not enabled, the parameters for these functions have required values that are defined in the <<features-features-multiViewport,multiple viewports>> section of the spec but were not reflected in the valid usage text for these functions. * Add the +<<VK_EXT_swapchain_colorspace>>+ extension defining common color spaces.
2017-01-18 04:11:25 +00:00
i &=
\begin{cases}
i \bmod size & \text{for repeat} \\
Change log for February 10, 2017 Vulkan 1.0.40 spec update: * Bump API patch number and header version number to 40 for this update. * There is a major build change in this release. We are now using the Ruby-based ``asciidoctor'' implementation, rather than the Python-based ``asciidoc'' implementation, to process the specification. While the actual specification markup changes were minimal, this requires a new set of build tools and a very different installation process, especially because we now use an experimental direct-to-PDF backend for Asciidoctor instead of Docbook->dblatex->PDF. It is no longer possible to build the Specification using asciidoc. See doc/specs/vulkan/README.adoc for some guidance on installing the new toolchain components. * There are some minor rendering issues in the PDF output due to teething problems with the asciidoctor toolchain, especially with mathematical equations. We are aware of these and working on them. Github Issues: * Updated sample code for the <<sparsememory-examples-basic,sparse resource binding example>> (public issue 97). * Modify line and point clipping behavior in the <<vertexpostproc-clipping, Primitive Clipping>> section to allow for pop-free behavior. The ability to check for which behavior is implemented may be added a future feature or extension (public issue 113). * Unify the discussions of implicit ordering throughout the spec, in particular in the new sections <<drawing-primitive-order, Primitive Order>>, <<primrast-order, Rasterization Order>>, and <<synchronization-implicit, Implicit Synchronization Guarantees>>; the discussion of <<synchronization-submission-order, submission order>>; and references elsewhere to these sections (public issue 133). * Clarify \<\<descriptorsets-compatibility,Pipeline Layout Compatibility>> language and introduce the term ``identically defined'' (public issue 164). * Add a dependency to the +VK_EXT_debug_marker+ extension that's needed to reuse the object type enum from +VK_EXT_debug_report+, and moves the definition of that enum into +VK_EXT_debug_report+ where it should be (public issue 409). * Remove redundant valid usage statement from slink:VkImageBlit (public issue 421). * Update GL_KHR_vulkan_glsl to allow the ternary operator to result in a specialization constant (public issue 424). * Fix valid usage for flink:VkPipelineShaderStageCreateInfo (public issue 426). * Correct typo in New Objects list for <<VK_EXT_debug_report>> (public issue 447). Internal Issues: * Moved to asciidoctor for spec builds (internal issue 121). * Update style guide to describe where to put new extensions-specific asciidoc files, and what to name them (internal issue 626). * Add src/spec/indexExt.py to autogenerate registry index entries linking into the 1.0-extensions specification, instead of maintaining the index manually. (internal issue 642). * Autogenerate extension dependencies and lists of all extensions and all KHR extensions from the "supported" attributes in +vk.xml+. Execute +make config/extDependency.sh+ from +doc/specs/vulkan+ when a supported extension is added to vk.xml, to regenerate the dependency script. The consequence is that specifying a single extension to the +makeExt+ script will automatically enable all extensions it depends on as well, and that the +makeAllExts+ and +makeKHR+ scripts do not need to be updated when a new extension is supported (internal issue 648). * Put extension appendices all at the same asciidoc section level, so KHR WSI extensions show up in the HTML index (internal issue 648). Other Issues: * Imbed images in the generated HTML specs instead of loading them from the images/ directory. * Fix missing EXT in extension name (ename:VK_EXT_SWAPCHAIN_COLOR_SPACE_EXTENSION_NAME). * Add new +VK_EXT_SMPTE_2086_metadata+ extension. * In the <<platformCreateSurface_xlib,Xlib Surface>> section of the +VK_KHR_xlib_surface+ specification, add language warning users that they always need to call code:XinitThreads. * Use the term "presentable image" (rather than "swapchain image") consistently in +VK_KHR_swapchain+ and related extensions, and add a glossary term defining it. * Relocate the valid usage for samples of flink:vkGetPhysicalDeviceSparseImageFormatProperties2KHR::pname:pFormatInfo to be below the flink:VkPhysicalDeviceSparseImageFormatInfo2KHR structure.
2017-02-11 04:37:39 +00:00
(size-1) - \mathbin{mirror}
Change log for January 23, 2017 Vulkan 1.0.39 spec update: * Bump API patch number and header version number to 39 for this update. Github Issues: * Clarified that only accesses via the specified buffer/image subresource ranges are included in the access scopes (public issue 306). * Add missing valid usage statements for flink:vkCreateComputePipelines and flink:vkCreateGraphicsPipelines (public issue 427). Internal Issues: * Add a Note to the <<invariance,Invariance>> appendix about a difference between OpenGL and Vulkan with regards to how primitives derived from offsets are handled (internal issue 355). * Add the +<<VK_KHR_get_physical_device_properties2>>+, +<<VK_KHR_maintenance1>>+, and +<<VK_KHR_shader_draw_parameters>>+ extensions (internal issue 448). * Add the +<<VK_EXT_shader_subgroup_vote>>+ and +<<VK_EXT_shader_subgroup_ballot>>+ extensions (internal issue 449). * Update the texture level-of-detail equation in the <<textures-scale-factor,Scale Factor Operation>> section to better approximate the ellipse major and minor axes (internal issue 547). * Forbid non-explicitly allowed uses of interface decorations in the introduction to the <<interfaces,Shader Interfaces>> chapter (internal issue 607). * Replace use of MathJax with KaTeX, for improved load-time performance as well as avoiding the scrolling-and-scrolling behavior due to MathJax asynchronous rendering when loading at an anchor inside the spec. This change also requires moving to HTML5 output for the spec instead of XHTML, and there is a visible difference in that the chapter navigation index is now in a scrollable sidebar instead of at the top of the document. We may or may not retain the nav sidebar based on feedback (internal issue 613). * Improve consistency of markup and formatting in extension appendices (internal issue 631). Other Issues: * Add explicit valid usage statements to slink:VkImageCopy requiring that the source and destination layer ranges be contained in their respective source and destination images. * Add valid usage language for swapchain of flink:vkAcquireNextImage. If the swapchain has been replaced, then it should not be passed to flink:vkAcquireNextImage. * Add a valid usage statement to flink:vkCreateImageView, that the image must have been created with an appropriate usage bit set. * Noted that slink:VkDisplayPresentInfoKHR is a valid extension of slink:VkPresentInfoKHR in the <<wsi_swapchain,WSI Swapchain>> section. * Update valid usage for flink:vkCmdSetViewport and flink:vkCmdSetScissor to account for the multiple viewport feature. If the feature is not enabled, the parameters for these functions have required values that are defined in the <<features-features-multiViewport,multiple viewports>> section of the spec but were not reflected in the valid usage text for these functions. * Add the +<<VK_EXT_swapchain_colorspace>>+ extension defining common color spaces.
2017-01-18 04:11:25 +00:00
((i \bmod (2 \times size)) - size) & \text{for mirrored repeat} \\
Change log for February 10, 2017 Vulkan 1.0.40 spec update: * Bump API patch number and header version number to 40 for this update. * There is a major build change in this release. We are now using the Ruby-based ``asciidoctor'' implementation, rather than the Python-based ``asciidoc'' implementation, to process the specification. While the actual specification markup changes were minimal, this requires a new set of build tools and a very different installation process, especially because we now use an experimental direct-to-PDF backend for Asciidoctor instead of Docbook->dblatex->PDF. It is no longer possible to build the Specification using asciidoc. See doc/specs/vulkan/README.adoc for some guidance on installing the new toolchain components. * There are some minor rendering issues in the PDF output due to teething problems with the asciidoctor toolchain, especially with mathematical equations. We are aware of these and working on them. Github Issues: * Updated sample code for the <<sparsememory-examples-basic,sparse resource binding example>> (public issue 97). * Modify line and point clipping behavior in the <<vertexpostproc-clipping, Primitive Clipping>> section to allow for pop-free behavior. The ability to check for which behavior is implemented may be added a future feature or extension (public issue 113). * Unify the discussions of implicit ordering throughout the spec, in particular in the new sections <<drawing-primitive-order, Primitive Order>>, <<primrast-order, Rasterization Order>>, and <<synchronization-implicit, Implicit Synchronization Guarantees>>; the discussion of <<synchronization-submission-order, submission order>>; and references elsewhere to these sections (public issue 133). * Clarify \<\<descriptorsets-compatibility,Pipeline Layout Compatibility>> language and introduce the term ``identically defined'' (public issue 164). * Add a dependency to the +VK_EXT_debug_marker+ extension that's needed to reuse the object type enum from +VK_EXT_debug_report+, and moves the definition of that enum into +VK_EXT_debug_report+ where it should be (public issue 409). * Remove redundant valid usage statement from slink:VkImageBlit (public issue 421). * Update GL_KHR_vulkan_glsl to allow the ternary operator to result in a specialization constant (public issue 424). * Fix valid usage for flink:VkPipelineShaderStageCreateInfo (public issue 426). * Correct typo in New Objects list for <<VK_EXT_debug_report>> (public issue 447). Internal Issues: * Moved to asciidoctor for spec builds (internal issue 121). * Update style guide to describe where to put new extensions-specific asciidoc files, and what to name them (internal issue 626). * Add src/spec/indexExt.py to autogenerate registry index entries linking into the 1.0-extensions specification, instead of maintaining the index manually. (internal issue 642). * Autogenerate extension dependencies and lists of all extensions and all KHR extensions from the "supported" attributes in +vk.xml+. Execute +make config/extDependency.sh+ from +doc/specs/vulkan+ when a supported extension is added to vk.xml, to regenerate the dependency script. The consequence is that specifying a single extension to the +makeExt+ script will automatically enable all extensions it depends on as well, and that the +makeAllExts+ and +makeKHR+ scripts do not need to be updated when a new extension is supported (internal issue 648). * Put extension appendices all at the same asciidoc section level, so KHR WSI extensions show up in the HTML index (internal issue 648). Other Issues: * Imbed images in the generated HTML specs instead of loading them from the images/ directory. * Fix missing EXT in extension name (ename:VK_EXT_SWAPCHAIN_COLOR_SPACE_EXTENSION_NAME). * Add new +VK_EXT_SMPTE_2086_metadata+ extension. * In the <<platformCreateSurface_xlib,Xlib Surface>> section of the +VK_KHR_xlib_surface+ specification, add language warning users that they always need to call code:XinitThreads. * Use the term "presentable image" (rather than "swapchain image") consistently in +VK_KHR_swapchain+ and related extensions, and add a glossary term defining it. * Relocate the valid usage for samples of flink:vkGetPhysicalDeviceSparseImageFormatProperties2KHR::pname:pFormatInfo to be below the flink:VkPhysicalDeviceSparseImageFormatInfo2KHR structure.
2017-02-11 04:37:39 +00:00
\mathbin{clamp}(i,0,size-1) & \text{for clamp to edge} \\
\mathbin{clamp}(i,-1,size) & \text{for clamp to border} \\
\mathbin{clamp}(\mathbin{mirror}(i),0,size-1) & \text{for mirror clamp to edge}
Change log for January 23, 2017 Vulkan 1.0.39 spec update: * Bump API patch number and header version number to 39 for this update. Github Issues: * Clarified that only accesses via the specified buffer/image subresource ranges are included in the access scopes (public issue 306). * Add missing valid usage statements for flink:vkCreateComputePipelines and flink:vkCreateGraphicsPipelines (public issue 427). Internal Issues: * Add a Note to the <<invariance,Invariance>> appendix about a difference between OpenGL and Vulkan with regards to how primitives derived from offsets are handled (internal issue 355). * Add the +<<VK_KHR_get_physical_device_properties2>>+, +<<VK_KHR_maintenance1>>+, and +<<VK_KHR_shader_draw_parameters>>+ extensions (internal issue 448). * Add the +<<VK_EXT_shader_subgroup_vote>>+ and +<<VK_EXT_shader_subgroup_ballot>>+ extensions (internal issue 449). * Update the texture level-of-detail equation in the <<textures-scale-factor,Scale Factor Operation>> section to better approximate the ellipse major and minor axes (internal issue 547). * Forbid non-explicitly allowed uses of interface decorations in the introduction to the <<interfaces,Shader Interfaces>> chapter (internal issue 607). * Replace use of MathJax with KaTeX, for improved load-time performance as well as avoiding the scrolling-and-scrolling behavior due to MathJax asynchronous rendering when loading at an anchor inside the spec. This change also requires moving to HTML5 output for the spec instead of XHTML, and there is a visible difference in that the chapter navigation index is now in a scrollable sidebar instead of at the top of the document. We may or may not retain the nav sidebar based on feedback (internal issue 613). * Improve consistency of markup and formatting in extension appendices (internal issue 631). Other Issues: * Add explicit valid usage statements to slink:VkImageCopy requiring that the source and destination layer ranges be contained in their respective source and destination images. * Add valid usage language for swapchain of flink:vkAcquireNextImage. If the swapchain has been replaced, then it should not be passed to flink:vkAcquireNextImage. * Add a valid usage statement to flink:vkCreateImageView, that the image must have been created with an appropriate usage bit set. * Noted that slink:VkDisplayPresentInfoKHR is a valid extension of slink:VkPresentInfoKHR in the <<wsi_swapchain,WSI Swapchain>> section. * Update valid usage for flink:vkCmdSetViewport and flink:vkCmdSetScissor to account for the multiple viewport feature. If the feature is not enabled, the parameters for these functions have required values that are defined in the <<features-features-multiViewport,multiple viewports>> section of the spec but were not reflected in the valid usage text for these functions. * Add the +<<VK_EXT_swapchain_colorspace>>+ extension defining common color spaces.
2017-01-18 04:11:25 +00:00
\end{cases}
Change log for February 10, 2017 Vulkan 1.0.40 spec update: * Bump API patch number and header version number to 40 for this update. * There is a major build change in this release. We are now using the Ruby-based ``asciidoctor'' implementation, rather than the Python-based ``asciidoc'' implementation, to process the specification. While the actual specification markup changes were minimal, this requires a new set of build tools and a very different installation process, especially because we now use an experimental direct-to-PDF backend for Asciidoctor instead of Docbook->dblatex->PDF. It is no longer possible to build the Specification using asciidoc. See doc/specs/vulkan/README.adoc for some guidance on installing the new toolchain components. * There are some minor rendering issues in the PDF output due to teething problems with the asciidoctor toolchain, especially with mathematical equations. We are aware of these and working on them. Github Issues: * Updated sample code for the <<sparsememory-examples-basic,sparse resource binding example>> (public issue 97). * Modify line and point clipping behavior in the <<vertexpostproc-clipping, Primitive Clipping>> section to allow for pop-free behavior. The ability to check for which behavior is implemented may be added a future feature or extension (public issue 113). * Unify the discussions of implicit ordering throughout the spec, in particular in the new sections <<drawing-primitive-order, Primitive Order>>, <<primrast-order, Rasterization Order>>, and <<synchronization-implicit, Implicit Synchronization Guarantees>>; the discussion of <<synchronization-submission-order, submission order>>; and references elsewhere to these sections (public issue 133). * Clarify \<\<descriptorsets-compatibility,Pipeline Layout Compatibility>> language and introduce the term ``identically defined'' (public issue 164). * Add a dependency to the +VK_EXT_debug_marker+ extension that's needed to reuse the object type enum from +VK_EXT_debug_report+, and moves the definition of that enum into +VK_EXT_debug_report+ where it should be (public issue 409). * Remove redundant valid usage statement from slink:VkImageBlit (public issue 421). * Update GL_KHR_vulkan_glsl to allow the ternary operator to result in a specialization constant (public issue 424). * Fix valid usage for flink:VkPipelineShaderStageCreateInfo (public issue 426). * Correct typo in New Objects list for <<VK_EXT_debug_report>> (public issue 447). Internal Issues: * Moved to asciidoctor for spec builds (internal issue 121). * Update style guide to describe where to put new extensions-specific asciidoc files, and what to name them (internal issue 626). * Add src/spec/indexExt.py to autogenerate registry index entries linking into the 1.0-extensions specification, instead of maintaining the index manually. (internal issue 642). * Autogenerate extension dependencies and lists of all extensions and all KHR extensions from the "supported" attributes in +vk.xml+. Execute +make config/extDependency.sh+ from +doc/specs/vulkan+ when a supported extension is added to vk.xml, to regenerate the dependency script. The consequence is that specifying a single extension to the +makeExt+ script will automatically enable all extensions it depends on as well, and that the +makeAllExts+ and +makeKHR+ scripts do not need to be updated when a new extension is supported (internal issue 648). * Put extension appendices all at the same asciidoc section level, so KHR WSI extensions show up in the HTML index (internal issue 648). Other Issues: * Imbed images in the generated HTML specs instead of loading them from the images/ directory. * Fix missing EXT in extension name (ename:VK_EXT_SWAPCHAIN_COLOR_SPACE_EXTENSION_NAME). * Add new +VK_EXT_SMPTE_2086_metadata+ extension. * In the <<platformCreateSurface_xlib,Xlib Surface>> section of the +VK_KHR_xlib_surface+ specification, add language warning users that they always need to call code:XinitThreads. * Use the term "presentable image" (rather than "swapchain image") consistently in +VK_KHR_swapchain+ and related extensions, and add a glossary term defining it. * Relocate the valid usage for samples of flink:vkGetPhysicalDeviceSparseImageFormatProperties2KHR::pname:pFormatInfo to be below the flink:VkPhysicalDeviceSparseImageFormatInfo2KHR structure.
2017-02-11 04:37:39 +00:00
\end{aligned}
Change log for January 23, 2017 Vulkan 1.0.39 spec update: * Bump API patch number and header version number to 39 for this update. Github Issues: * Clarified that only accesses via the specified buffer/image subresource ranges are included in the access scopes (public issue 306). * Add missing valid usage statements for flink:vkCreateComputePipelines and flink:vkCreateGraphicsPipelines (public issue 427). Internal Issues: * Add a Note to the <<invariance,Invariance>> appendix about a difference between OpenGL and Vulkan with regards to how primitives derived from offsets are handled (internal issue 355). * Add the +<<VK_KHR_get_physical_device_properties2>>+, +<<VK_KHR_maintenance1>>+, and +<<VK_KHR_shader_draw_parameters>>+ extensions (internal issue 448). * Add the +<<VK_EXT_shader_subgroup_vote>>+ and +<<VK_EXT_shader_subgroup_ballot>>+ extensions (internal issue 449). * Update the texture level-of-detail equation in the <<textures-scale-factor,Scale Factor Operation>> section to better approximate the ellipse major and minor axes (internal issue 547). * Forbid non-explicitly allowed uses of interface decorations in the introduction to the <<interfaces,Shader Interfaces>> chapter (internal issue 607). * Replace use of MathJax with KaTeX, for improved load-time performance as well as avoiding the scrolling-and-scrolling behavior due to MathJax asynchronous rendering when loading at an anchor inside the spec. This change also requires moving to HTML5 output for the spec instead of XHTML, and there is a visible difference in that the chapter navigation index is now in a scrollable sidebar instead of at the top of the document. We may or may not retain the nav sidebar based on feedback (internal issue 613). * Improve consistency of markup and formatting in extension appendices (internal issue 631). Other Issues: * Add explicit valid usage statements to slink:VkImageCopy requiring that the source and destination layer ranges be contained in their respective source and destination images. * Add valid usage language for swapchain of flink:vkAcquireNextImage. If the swapchain has been replaced, then it should not be passed to flink:vkAcquireNextImage. * Add a valid usage statement to flink:vkCreateImageView, that the image must have been created with an appropriate usage bit set. * Noted that slink:VkDisplayPresentInfoKHR is a valid extension of slink:VkPresentInfoKHR in the <<wsi_swapchain,WSI Swapchain>> section. * Update valid usage for flink:vkCmdSetViewport and flink:vkCmdSetScissor to account for the multiple viewport feature. If the feature is not enabled, the parameters for these functions have required values that are defined in the <<features-features-multiViewport,multiple viewports>> section of the spec but were not reflected in the valid usage text for these functions. * Add the +<<VK_EXT_swapchain_colorspace>>+ extension defining common color spaces.
2017-01-18 04:11:25 +00:00
++++++++++++++++++++++++
=== latexmath block 47
[latexmath]
++++++++++++++++++++++++
Change log for February 10, 2017 Vulkan 1.0.40 spec update: * Bump API patch number and header version number to 40 for this update. * There is a major build change in this release. We are now using the Ruby-based ``asciidoctor'' implementation, rather than the Python-based ``asciidoc'' implementation, to process the specification. While the actual specification markup changes were minimal, this requires a new set of build tools and a very different installation process, especially because we now use an experimental direct-to-PDF backend for Asciidoctor instead of Docbook->dblatex->PDF. It is no longer possible to build the Specification using asciidoc. See doc/specs/vulkan/README.adoc for some guidance on installing the new toolchain components. * There are some minor rendering issues in the PDF output due to teething problems with the asciidoctor toolchain, especially with mathematical equations. We are aware of these and working on them. Github Issues: * Updated sample code for the <<sparsememory-examples-basic,sparse resource binding example>> (public issue 97). * Modify line and point clipping behavior in the <<vertexpostproc-clipping, Primitive Clipping>> section to allow for pop-free behavior. The ability to check for which behavior is implemented may be added a future feature or extension (public issue 113). * Unify the discussions of implicit ordering throughout the spec, in particular in the new sections <<drawing-primitive-order, Primitive Order>>, <<primrast-order, Rasterization Order>>, and <<synchronization-implicit, Implicit Synchronization Guarantees>>; the discussion of <<synchronization-submission-order, submission order>>; and references elsewhere to these sections (public issue 133). * Clarify \<\<descriptorsets-compatibility,Pipeline Layout Compatibility>> language and introduce the term ``identically defined'' (public issue 164). * Add a dependency to the +VK_EXT_debug_marker+ extension that's needed to reuse the object type enum from +VK_EXT_debug_report+, and moves the definition of that enum into +VK_EXT_debug_report+ where it should be (public issue 409). * Remove redundant valid usage statement from slink:VkImageBlit (public issue 421). * Update GL_KHR_vulkan_glsl to allow the ternary operator to result in a specialization constant (public issue 424). * Fix valid usage for flink:VkPipelineShaderStageCreateInfo (public issue 426). * Correct typo in New Objects list for <<VK_EXT_debug_report>> (public issue 447). Internal Issues: * Moved to asciidoctor for spec builds (internal issue 121). * Update style guide to describe where to put new extensions-specific asciidoc files, and what to name them (internal issue 626). * Add src/spec/indexExt.py to autogenerate registry index entries linking into the 1.0-extensions specification, instead of maintaining the index manually. (internal issue 642). * Autogenerate extension dependencies and lists of all extensions and all KHR extensions from the "supported" attributes in +vk.xml+. Execute +make config/extDependency.sh+ from +doc/specs/vulkan+ when a supported extension is added to vk.xml, to regenerate the dependency script. The consequence is that specifying a single extension to the +makeExt+ script will automatically enable all extensions it depends on as well, and that the +makeAllExts+ and +makeKHR+ scripts do not need to be updated when a new extension is supported (internal issue 648). * Put extension appendices all at the same asciidoc section level, so KHR WSI extensions show up in the HTML index (internal issue 648). Other Issues: * Imbed images in the generated HTML specs instead of loading them from the images/ directory. * Fix missing EXT in extension name (ename:VK_EXT_SWAPCHAIN_COLOR_SPACE_EXTENSION_NAME). * Add new +VK_EXT_SMPTE_2086_metadata+ extension. * In the <<platformCreateSurface_xlib,Xlib Surface>> section of the +VK_KHR_xlib_surface+ specification, add language warning users that they always need to call code:XinitThreads. * Use the term "presentable image" (rather than "swapchain image") consistently in +VK_KHR_swapchain+ and related extensions, and add a glossary term defining it. * Relocate the valid usage for samples of flink:vkGetPhysicalDeviceSparseImageFormatProperties2KHR::pname:pFormatInfo to be below the flink:VkPhysicalDeviceSparseImageFormatInfo2KHR structure.
2017-02-11 04:37:39 +00:00
\begin{aligned}
& \mathbin{mirror}(n) =
Change log for January 23, 2017 Vulkan 1.0.39 spec update: * Bump API patch number and header version number to 39 for this update. Github Issues: * Clarified that only accesses via the specified buffer/image subresource ranges are included in the access scopes (public issue 306). * Add missing valid usage statements for flink:vkCreateComputePipelines and flink:vkCreateGraphicsPipelines (public issue 427). Internal Issues: * Add a Note to the <<invariance,Invariance>> appendix about a difference between OpenGL and Vulkan with regards to how primitives derived from offsets are handled (internal issue 355). * Add the +<<VK_KHR_get_physical_device_properties2>>+, +<<VK_KHR_maintenance1>>+, and +<<VK_KHR_shader_draw_parameters>>+ extensions (internal issue 448). * Add the +<<VK_EXT_shader_subgroup_vote>>+ and +<<VK_EXT_shader_subgroup_ballot>>+ extensions (internal issue 449). * Update the texture level-of-detail equation in the <<textures-scale-factor,Scale Factor Operation>> section to better approximate the ellipse major and minor axes (internal issue 547). * Forbid non-explicitly allowed uses of interface decorations in the introduction to the <<interfaces,Shader Interfaces>> chapter (internal issue 607). * Replace use of MathJax with KaTeX, for improved load-time performance as well as avoiding the scrolling-and-scrolling behavior due to MathJax asynchronous rendering when loading at an anchor inside the spec. This change also requires moving to HTML5 output for the spec instead of XHTML, and there is a visible difference in that the chapter navigation index is now in a scrollable sidebar instead of at the top of the document. We may or may not retain the nav sidebar based on feedback (internal issue 613). * Improve consistency of markup and formatting in extension appendices (internal issue 631). Other Issues: * Add explicit valid usage statements to slink:VkImageCopy requiring that the source and destination layer ranges be contained in their respective source and destination images. * Add valid usage language for swapchain of flink:vkAcquireNextImage. If the swapchain has been replaced, then it should not be passed to flink:vkAcquireNextImage. * Add a valid usage statement to flink:vkCreateImageView, that the image must have been created with an appropriate usage bit set. * Noted that slink:VkDisplayPresentInfoKHR is a valid extension of slink:VkPresentInfoKHR in the <<wsi_swapchain,WSI Swapchain>> section. * Update valid usage for flink:vkCmdSetViewport and flink:vkCmdSetScissor to account for the multiple viewport feature. If the feature is not enabled, the parameters for these functions have required values that are defined in the <<features-features-multiViewport,multiple viewports>> section of the spec but were not reflected in the valid usage text for these functions. * Add the +<<VK_EXT_swapchain_colorspace>>+ extension defining common color spaces.
2017-01-18 04:11:25 +00:00
\begin{cases}
Change log for February 10, 2017 Vulkan 1.0.40 spec update: * Bump API patch number and header version number to 40 for this update. * There is a major build change in this release. We are now using the Ruby-based ``asciidoctor'' implementation, rather than the Python-based ``asciidoc'' implementation, to process the specification. While the actual specification markup changes were minimal, this requires a new set of build tools and a very different installation process, especially because we now use an experimental direct-to-PDF backend for Asciidoctor instead of Docbook->dblatex->PDF. It is no longer possible to build the Specification using asciidoc. See doc/specs/vulkan/README.adoc for some guidance on installing the new toolchain components. * There are some minor rendering issues in the PDF output due to teething problems with the asciidoctor toolchain, especially with mathematical equations. We are aware of these and working on them. Github Issues: * Updated sample code for the <<sparsememory-examples-basic,sparse resource binding example>> (public issue 97). * Modify line and point clipping behavior in the <<vertexpostproc-clipping, Primitive Clipping>> section to allow for pop-free behavior. The ability to check for which behavior is implemented may be added a future feature or extension (public issue 113). * Unify the discussions of implicit ordering throughout the spec, in particular in the new sections <<drawing-primitive-order, Primitive Order>>, <<primrast-order, Rasterization Order>>, and <<synchronization-implicit, Implicit Synchronization Guarantees>>; the discussion of <<synchronization-submission-order, submission order>>; and references elsewhere to these sections (public issue 133). * Clarify \<\<descriptorsets-compatibility,Pipeline Layout Compatibility>> language and introduce the term ``identically defined'' (public issue 164). * Add a dependency to the +VK_EXT_debug_marker+ extension that's needed to reuse the object type enum from +VK_EXT_debug_report+, and moves the definition of that enum into +VK_EXT_debug_report+ where it should be (public issue 409). * Remove redundant valid usage statement from slink:VkImageBlit (public issue 421). * Update GL_KHR_vulkan_glsl to allow the ternary operator to result in a specialization constant (public issue 424). * Fix valid usage for flink:VkPipelineShaderStageCreateInfo (public issue 426). * Correct typo in New Objects list for <<VK_EXT_debug_report>> (public issue 447). Internal Issues: * Moved to asciidoctor for spec builds (internal issue 121). * Update style guide to describe where to put new extensions-specific asciidoc files, and what to name them (internal issue 626). * Add src/spec/indexExt.py to autogenerate registry index entries linking into the 1.0-extensions specification, instead of maintaining the index manually. (internal issue 642). * Autogenerate extension dependencies and lists of all extensions and all KHR extensions from the "supported" attributes in +vk.xml+. Execute +make config/extDependency.sh+ from +doc/specs/vulkan+ when a supported extension is added to vk.xml, to regenerate the dependency script. The consequence is that specifying a single extension to the +makeExt+ script will automatically enable all extensions it depends on as well, and that the +makeAllExts+ and +makeKHR+ scripts do not need to be updated when a new extension is supported (internal issue 648). * Put extension appendices all at the same asciidoc section level, so KHR WSI extensions show up in the HTML index (internal issue 648). Other Issues: * Imbed images in the generated HTML specs instead of loading them from the images/ directory. * Fix missing EXT in extension name (ename:VK_EXT_SWAPCHAIN_COLOR_SPACE_EXTENSION_NAME). * Add new +VK_EXT_SMPTE_2086_metadata+ extension. * In the <<platformCreateSurface_xlib,Xlib Surface>> section of the +VK_KHR_xlib_surface+ specification, add language warning users that they always need to call code:XinitThreads. * Use the term "presentable image" (rather than "swapchain image") consistently in +VK_KHR_swapchain+ and related extensions, and add a glossary term defining it. * Relocate the valid usage for samples of flink:vkGetPhysicalDeviceSparseImageFormatProperties2KHR::pname:pFormatInfo to be below the flink:VkPhysicalDeviceSparseImageFormatInfo2KHR structure.
2017-02-11 04:37:39 +00:00
n & \text{for}\ n \geq 0 \\
Change log for January 23, 2017 Vulkan 1.0.39 spec update: * Bump API patch number and header version number to 39 for this update. Github Issues: * Clarified that only accesses via the specified buffer/image subresource ranges are included in the access scopes (public issue 306). * Add missing valid usage statements for flink:vkCreateComputePipelines and flink:vkCreateGraphicsPipelines (public issue 427). Internal Issues: * Add a Note to the <<invariance,Invariance>> appendix about a difference between OpenGL and Vulkan with regards to how primitives derived from offsets are handled (internal issue 355). * Add the +<<VK_KHR_get_physical_device_properties2>>+, +<<VK_KHR_maintenance1>>+, and +<<VK_KHR_shader_draw_parameters>>+ extensions (internal issue 448). * Add the +<<VK_EXT_shader_subgroup_vote>>+ and +<<VK_EXT_shader_subgroup_ballot>>+ extensions (internal issue 449). * Update the texture level-of-detail equation in the <<textures-scale-factor,Scale Factor Operation>> section to better approximate the ellipse major and minor axes (internal issue 547). * Forbid non-explicitly allowed uses of interface decorations in the introduction to the <<interfaces,Shader Interfaces>> chapter (internal issue 607). * Replace use of MathJax with KaTeX, for improved load-time performance as well as avoiding the scrolling-and-scrolling behavior due to MathJax asynchronous rendering when loading at an anchor inside the spec. This change also requires moving to HTML5 output for the spec instead of XHTML, and there is a visible difference in that the chapter navigation index is now in a scrollable sidebar instead of at the top of the document. We may or may not retain the nav sidebar based on feedback (internal issue 613). * Improve consistency of markup and formatting in extension appendices (internal issue 631). Other Issues: * Add explicit valid usage statements to slink:VkImageCopy requiring that the source and destination layer ranges be contained in their respective source and destination images. * Add valid usage language for swapchain of flink:vkAcquireNextImage. If the swapchain has been replaced, then it should not be passed to flink:vkAcquireNextImage. * Add a valid usage statement to flink:vkCreateImageView, that the image must have been created with an appropriate usage bit set. * Noted that slink:VkDisplayPresentInfoKHR is a valid extension of slink:VkPresentInfoKHR in the <<wsi_swapchain,WSI Swapchain>> section. * Update valid usage for flink:vkCmdSetViewport and flink:vkCmdSetScissor to account for the multiple viewport feature. If the feature is not enabled, the parameters for these functions have required values that are defined in the <<features-features-multiViewport,multiple viewports>> section of the spec but were not reflected in the valid usage text for these functions. * Add the +<<VK_EXT_swapchain_colorspace>>+ extension defining common color spaces.
2017-01-18 04:11:25 +00:00
-(1+n) & \text{otherwise}
\end{cases}
Change log for February 10, 2017 Vulkan 1.0.40 spec update: * Bump API patch number and header version number to 40 for this update. * There is a major build change in this release. We are now using the Ruby-based ``asciidoctor'' implementation, rather than the Python-based ``asciidoc'' implementation, to process the specification. While the actual specification markup changes were minimal, this requires a new set of build tools and a very different installation process, especially because we now use an experimental direct-to-PDF backend for Asciidoctor instead of Docbook->dblatex->PDF. It is no longer possible to build the Specification using asciidoc. See doc/specs/vulkan/README.adoc for some guidance on installing the new toolchain components. * There are some minor rendering issues in the PDF output due to teething problems with the asciidoctor toolchain, especially with mathematical equations. We are aware of these and working on them. Github Issues: * Updated sample code for the <<sparsememory-examples-basic,sparse resource binding example>> (public issue 97). * Modify line and point clipping behavior in the <<vertexpostproc-clipping, Primitive Clipping>> section to allow for pop-free behavior. The ability to check for which behavior is implemented may be added a future feature or extension (public issue 113). * Unify the discussions of implicit ordering throughout the spec, in particular in the new sections <<drawing-primitive-order, Primitive Order>>, <<primrast-order, Rasterization Order>>, and <<synchronization-implicit, Implicit Synchronization Guarantees>>; the discussion of <<synchronization-submission-order, submission order>>; and references elsewhere to these sections (public issue 133). * Clarify \<\<descriptorsets-compatibility,Pipeline Layout Compatibility>> language and introduce the term ``identically defined'' (public issue 164). * Add a dependency to the +VK_EXT_debug_marker+ extension that's needed to reuse the object type enum from +VK_EXT_debug_report+, and moves the definition of that enum into +VK_EXT_debug_report+ where it should be (public issue 409). * Remove redundant valid usage statement from slink:VkImageBlit (public issue 421). * Update GL_KHR_vulkan_glsl to allow the ternary operator to result in a specialization constant (public issue 424). * Fix valid usage for flink:VkPipelineShaderStageCreateInfo (public issue 426). * Correct typo in New Objects list for <<VK_EXT_debug_report>> (public issue 447). Internal Issues: * Moved to asciidoctor for spec builds (internal issue 121). * Update style guide to describe where to put new extensions-specific asciidoc files, and what to name them (internal issue 626). * Add src/spec/indexExt.py to autogenerate registry index entries linking into the 1.0-extensions specification, instead of maintaining the index manually. (internal issue 642). * Autogenerate extension dependencies and lists of all extensions and all KHR extensions from the "supported" attributes in +vk.xml+. Execute +make config/extDependency.sh+ from +doc/specs/vulkan+ when a supported extension is added to vk.xml, to regenerate the dependency script. The consequence is that specifying a single extension to the +makeExt+ script will automatically enable all extensions it depends on as well, and that the +makeAllExts+ and +makeKHR+ scripts do not need to be updated when a new extension is supported (internal issue 648). * Put extension appendices all at the same asciidoc section level, so KHR WSI extensions show up in the HTML index (internal issue 648). Other Issues: * Imbed images in the generated HTML specs instead of loading them from the images/ directory. * Fix missing EXT in extension name (ename:VK_EXT_SWAPCHAIN_COLOR_SPACE_EXTENSION_NAME). * Add new +VK_EXT_SMPTE_2086_metadata+ extension. * In the <<platformCreateSurface_xlib,Xlib Surface>> section of the +VK_KHR_xlib_surface+ specification, add language warning users that they always need to call code:XinitThreads. * Use the term "presentable image" (rather than "swapchain image") consistently in +VK_KHR_swapchain+ and related extensions, and add a glossary term defining it. * Relocate the valid usage for samples of flink:vkGetPhysicalDeviceSparseImageFormatProperties2KHR::pname:pFormatInfo to be below the flink:VkPhysicalDeviceSparseImageFormatInfo2KHR structure.
2017-02-11 04:37:39 +00:00
\end{aligned}
Change log for January 23, 2017 Vulkan 1.0.39 spec update: * Bump API patch number and header version number to 39 for this update. Github Issues: * Clarified that only accesses via the specified buffer/image subresource ranges are included in the access scopes (public issue 306). * Add missing valid usage statements for flink:vkCreateComputePipelines and flink:vkCreateGraphicsPipelines (public issue 427). Internal Issues: * Add a Note to the <<invariance,Invariance>> appendix about a difference between OpenGL and Vulkan with regards to how primitives derived from offsets are handled (internal issue 355). * Add the +<<VK_KHR_get_physical_device_properties2>>+, +<<VK_KHR_maintenance1>>+, and +<<VK_KHR_shader_draw_parameters>>+ extensions (internal issue 448). * Add the +<<VK_EXT_shader_subgroup_vote>>+ and +<<VK_EXT_shader_subgroup_ballot>>+ extensions (internal issue 449). * Update the texture level-of-detail equation in the <<textures-scale-factor,Scale Factor Operation>> section to better approximate the ellipse major and minor axes (internal issue 547). * Forbid non-explicitly allowed uses of interface decorations in the introduction to the <<interfaces,Shader Interfaces>> chapter (internal issue 607). * Replace use of MathJax with KaTeX, for improved load-time performance as well as avoiding the scrolling-and-scrolling behavior due to MathJax asynchronous rendering when loading at an anchor inside the spec. This change also requires moving to HTML5 output for the spec instead of XHTML, and there is a visible difference in that the chapter navigation index is now in a scrollable sidebar instead of at the top of the document. We may or may not retain the nav sidebar based on feedback (internal issue 613). * Improve consistency of markup and formatting in extension appendices (internal issue 631). Other Issues: * Add explicit valid usage statements to slink:VkImageCopy requiring that the source and destination layer ranges be contained in their respective source and destination images. * Add valid usage language for swapchain of flink:vkAcquireNextImage. If the swapchain has been replaced, then it should not be passed to flink:vkAcquireNextImage. * Add a valid usage statement to flink:vkCreateImageView, that the image must have been created with an appropriate usage bit set. * Noted that slink:VkDisplayPresentInfoKHR is a valid extension of slink:VkPresentInfoKHR in the <<wsi_swapchain,WSI Swapchain>> section. * Update valid usage for flink:vkCmdSetViewport and flink:vkCmdSetScissor to account for the multiple viewport feature. If the feature is not enabled, the parameters for these functions have required values that are defined in the <<features-features-multiViewport,multiple viewports>> section of the spec but were not reflected in the valid usage text for these functions. * Add the +<<VK_EXT_swapchain_colorspace>>+ extension defining common color spaces.
2017-01-18 04:11:25 +00:00
++++++++++++++++++++++++
=== latexmath block 48
[latexmath]
++++++++++++++++++++++++
Change log for February 10, 2017 Vulkan 1.0.40 spec update: * Bump API patch number and header version number to 40 for this update. * There is a major build change in this release. We are now using the Ruby-based ``asciidoctor'' implementation, rather than the Python-based ``asciidoc'' implementation, to process the specification. While the actual specification markup changes were minimal, this requires a new set of build tools and a very different installation process, especially because we now use an experimental direct-to-PDF backend for Asciidoctor instead of Docbook->dblatex->PDF. It is no longer possible to build the Specification using asciidoc. See doc/specs/vulkan/README.adoc for some guidance on installing the new toolchain components. * There are some minor rendering issues in the PDF output due to teething problems with the asciidoctor toolchain, especially with mathematical equations. We are aware of these and working on them. Github Issues: * Updated sample code for the <<sparsememory-examples-basic,sparse resource binding example>> (public issue 97). * Modify line and point clipping behavior in the <<vertexpostproc-clipping, Primitive Clipping>> section to allow for pop-free behavior. The ability to check for which behavior is implemented may be added a future feature or extension (public issue 113). * Unify the discussions of implicit ordering throughout the spec, in particular in the new sections <<drawing-primitive-order, Primitive Order>>, <<primrast-order, Rasterization Order>>, and <<synchronization-implicit, Implicit Synchronization Guarantees>>; the discussion of <<synchronization-submission-order, submission order>>; and references elsewhere to these sections (public issue 133). * Clarify \<\<descriptorsets-compatibility,Pipeline Layout Compatibility>> language and introduce the term ``identically defined'' (public issue 164). * Add a dependency to the +VK_EXT_debug_marker+ extension that's needed to reuse the object type enum from +VK_EXT_debug_report+, and moves the definition of that enum into +VK_EXT_debug_report+ where it should be (public issue 409). * Remove redundant valid usage statement from slink:VkImageBlit (public issue 421). * Update GL_KHR_vulkan_glsl to allow the ternary operator to result in a specialization constant (public issue 424). * Fix valid usage for flink:VkPipelineShaderStageCreateInfo (public issue 426). * Correct typo in New Objects list for <<VK_EXT_debug_report>> (public issue 447). Internal Issues: * Moved to asciidoctor for spec builds (internal issue 121). * Update style guide to describe where to put new extensions-specific asciidoc files, and what to name them (internal issue 626). * Add src/spec/indexExt.py to autogenerate registry index entries linking into the 1.0-extensions specification, instead of maintaining the index manually. (internal issue 642). * Autogenerate extension dependencies and lists of all extensions and all KHR extensions from the "supported" attributes in +vk.xml+. Execute +make config/extDependency.sh+ from +doc/specs/vulkan+ when a supported extension is added to vk.xml, to regenerate the dependency script. The consequence is that specifying a single extension to the +makeExt+ script will automatically enable all extensions it depends on as well, and that the +makeAllExts+ and +makeKHR+ scripts do not need to be updated when a new extension is supported (internal issue 648). * Put extension appendices all at the same asciidoc section level, so KHR WSI extensions show up in the HTML index (internal issue 648). Other Issues: * Imbed images in the generated HTML specs instead of loading them from the images/ directory. * Fix missing EXT in extension name (ename:VK_EXT_SWAPCHAIN_COLOR_SPACE_EXTENSION_NAME). * Add new +VK_EXT_SMPTE_2086_metadata+ extension. * In the <<platformCreateSurface_xlib,Xlib Surface>> section of the +VK_KHR_xlib_surface+ specification, add language warning users that they always need to call code:XinitThreads. * Use the term "presentable image" (rather than "swapchain image") consistently in +VK_KHR_swapchain+ and related extensions, and add a glossary term defining it. * Relocate the valid usage for samples of flink:vkGetPhysicalDeviceSparseImageFormatProperties2KHR::pname:pFormatInfo to be below the flink:VkPhysicalDeviceSparseImageFormatInfo2KHR structure.
2017-02-11 04:37:39 +00:00
\begin{aligned}
Change log for January 23, 2017 Vulkan 1.0.39 spec update: * Bump API patch number and header version number to 39 for this update. Github Issues: * Clarified that only accesses via the specified buffer/image subresource ranges are included in the access scopes (public issue 306). * Add missing valid usage statements for flink:vkCreateComputePipelines and flink:vkCreateGraphicsPipelines (public issue 427). Internal Issues: * Add a Note to the <<invariance,Invariance>> appendix about a difference between OpenGL and Vulkan with regards to how primitives derived from offsets are handled (internal issue 355). * Add the +<<VK_KHR_get_physical_device_properties2>>+, +<<VK_KHR_maintenance1>>+, and +<<VK_KHR_shader_draw_parameters>>+ extensions (internal issue 448). * Add the +<<VK_EXT_shader_subgroup_vote>>+ and +<<VK_EXT_shader_subgroup_ballot>>+ extensions (internal issue 449). * Update the texture level-of-detail equation in the <<textures-scale-factor,Scale Factor Operation>> section to better approximate the ellipse major and minor axes (internal issue 547). * Forbid non-explicitly allowed uses of interface decorations in the introduction to the <<interfaces,Shader Interfaces>> chapter (internal issue 607). * Replace use of MathJax with KaTeX, for improved load-time performance as well as avoiding the scrolling-and-scrolling behavior due to MathJax asynchronous rendering when loading at an anchor inside the spec. This change also requires moving to HTML5 output for the spec instead of XHTML, and there is a visible difference in that the chapter navigation index is now in a scrollable sidebar instead of at the top of the document. We may or may not retain the nav sidebar based on feedback (internal issue 613). * Improve consistency of markup and formatting in extension appendices (internal issue 631). Other Issues: * Add explicit valid usage statements to slink:VkImageCopy requiring that the source and destination layer ranges be contained in their respective source and destination images. * Add valid usage language for swapchain of flink:vkAcquireNextImage. If the swapchain has been replaced, then it should not be passed to flink:vkAcquireNextImage. * Add a valid usage statement to flink:vkCreateImageView, that the image must have been created with an appropriate usage bit set. * Noted that slink:VkDisplayPresentInfoKHR is a valid extension of slink:VkPresentInfoKHR in the <<wsi_swapchain,WSI Swapchain>> section. * Update valid usage for flink:vkCmdSetViewport and flink:vkCmdSetScissor to account for the multiple viewport feature. If the feature is not enabled, the parameters for these functions have required values that are defined in the <<features-features-multiViewport,multiple viewports>> section of the spec but were not reflected in the valid usage text for these functions. * Add the +<<VK_EXT_swapchain_colorspace>>+ extension defining common color spaces.
2017-01-18 04:11:25 +00:00
\tau[R] &= \tau_{i0j1}[level_{base}][comp] \\
\tau[G] &= \tau_{i1j1}[level_{base}][comp] \\
\tau[B] &= \tau_{i1j0}[level_{base}][comp] \\
\tau[A] &= \tau_{i0j0}[level_{base}][comp]
Change log for February 10, 2017 Vulkan 1.0.40 spec update: * Bump API patch number and header version number to 40 for this update. * There is a major build change in this release. We are now using the Ruby-based ``asciidoctor'' implementation, rather than the Python-based ``asciidoc'' implementation, to process the specification. While the actual specification markup changes were minimal, this requires a new set of build tools and a very different installation process, especially because we now use an experimental direct-to-PDF backend for Asciidoctor instead of Docbook->dblatex->PDF. It is no longer possible to build the Specification using asciidoc. See doc/specs/vulkan/README.adoc for some guidance on installing the new toolchain components. * There are some minor rendering issues in the PDF output due to teething problems with the asciidoctor toolchain, especially with mathematical equations. We are aware of these and working on them. Github Issues: * Updated sample code for the <<sparsememory-examples-basic,sparse resource binding example>> (public issue 97). * Modify line and point clipping behavior in the <<vertexpostproc-clipping, Primitive Clipping>> section to allow for pop-free behavior. The ability to check for which behavior is implemented may be added a future feature or extension (public issue 113). * Unify the discussions of implicit ordering throughout the spec, in particular in the new sections <<drawing-primitive-order, Primitive Order>>, <<primrast-order, Rasterization Order>>, and <<synchronization-implicit, Implicit Synchronization Guarantees>>; the discussion of <<synchronization-submission-order, submission order>>; and references elsewhere to these sections (public issue 133). * Clarify \<\<descriptorsets-compatibility,Pipeline Layout Compatibility>> language and introduce the term ``identically defined'' (public issue 164). * Add a dependency to the +VK_EXT_debug_marker+ extension that's needed to reuse the object type enum from +VK_EXT_debug_report+, and moves the definition of that enum into +VK_EXT_debug_report+ where it should be (public issue 409). * Remove redundant valid usage statement from slink:VkImageBlit (public issue 421). * Update GL_KHR_vulkan_glsl to allow the ternary operator to result in a specialization constant (public issue 424). * Fix valid usage for flink:VkPipelineShaderStageCreateInfo (public issue 426). * Correct typo in New Objects list for <<VK_EXT_debug_report>> (public issue 447). Internal Issues: * Moved to asciidoctor for spec builds (internal issue 121). * Update style guide to describe where to put new extensions-specific asciidoc files, and what to name them (internal issue 626). * Add src/spec/indexExt.py to autogenerate registry index entries linking into the 1.0-extensions specification, instead of maintaining the index manually. (internal issue 642). * Autogenerate extension dependencies and lists of all extensions and all KHR extensions from the "supported" attributes in +vk.xml+. Execute +make config/extDependency.sh+ from +doc/specs/vulkan+ when a supported extension is added to vk.xml, to regenerate the dependency script. The consequence is that specifying a single extension to the +makeExt+ script will automatically enable all extensions it depends on as well, and that the +makeAllExts+ and +makeKHR+ scripts do not need to be updated when a new extension is supported (internal issue 648). * Put extension appendices all at the same asciidoc section level, so KHR WSI extensions show up in the HTML index (internal issue 648). Other Issues: * Imbed images in the generated HTML specs instead of loading them from the images/ directory. * Fix missing EXT in extension name (ename:VK_EXT_SWAPCHAIN_COLOR_SPACE_EXTENSION_NAME). * Add new +VK_EXT_SMPTE_2086_metadata+ extension. * In the <<platformCreateSurface_xlib,Xlib Surface>> section of the +VK_KHR_xlib_surface+ specification, add language warning users that they always need to call code:XinitThreads. * Use the term "presentable image" (rather than "swapchain image") consistently in +VK_KHR_swapchain+ and related extensions, and add a glossary term defining it. * Relocate the valid usage for samples of flink:vkGetPhysicalDeviceSparseImageFormatProperties2KHR::pname:pFormatInfo to be below the flink:VkPhysicalDeviceSparseImageFormatInfo2KHR structure.
2017-02-11 04:37:39 +00:00
\end{aligned}
Change log for January 23, 2017 Vulkan 1.0.39 spec update: * Bump API patch number and header version number to 39 for this update. Github Issues: * Clarified that only accesses via the specified buffer/image subresource ranges are included in the access scopes (public issue 306). * Add missing valid usage statements for flink:vkCreateComputePipelines and flink:vkCreateGraphicsPipelines (public issue 427). Internal Issues: * Add a Note to the <<invariance,Invariance>> appendix about a difference between OpenGL and Vulkan with regards to how primitives derived from offsets are handled (internal issue 355). * Add the +<<VK_KHR_get_physical_device_properties2>>+, +<<VK_KHR_maintenance1>>+, and +<<VK_KHR_shader_draw_parameters>>+ extensions (internal issue 448). * Add the +<<VK_EXT_shader_subgroup_vote>>+ and +<<VK_EXT_shader_subgroup_ballot>>+ extensions (internal issue 449). * Update the texture level-of-detail equation in the <<textures-scale-factor,Scale Factor Operation>> section to better approximate the ellipse major and minor axes (internal issue 547). * Forbid non-explicitly allowed uses of interface decorations in the introduction to the <<interfaces,Shader Interfaces>> chapter (internal issue 607). * Replace use of MathJax with KaTeX, for improved load-time performance as well as avoiding the scrolling-and-scrolling behavior due to MathJax asynchronous rendering when loading at an anchor inside the spec. This change also requires moving to HTML5 output for the spec instead of XHTML, and there is a visible difference in that the chapter navigation index is now in a scrollable sidebar instead of at the top of the document. We may or may not retain the nav sidebar based on feedback (internal issue 613). * Improve consistency of markup and formatting in extension appendices (internal issue 631). Other Issues: * Add explicit valid usage statements to slink:VkImageCopy requiring that the source and destination layer ranges be contained in their respective source and destination images. * Add valid usage language for swapchain of flink:vkAcquireNextImage. If the swapchain has been replaced, then it should not be passed to flink:vkAcquireNextImage. * Add a valid usage statement to flink:vkCreateImageView, that the image must have been created with an appropriate usage bit set. * Noted that slink:VkDisplayPresentInfoKHR is a valid extension of slink:VkPresentInfoKHR in the <<wsi_swapchain,WSI Swapchain>> section. * Update valid usage for flink:vkCmdSetViewport and flink:vkCmdSetScissor to account for the multiple viewport feature. If the feature is not enabled, the parameters for these functions have required values that are defined in the <<features-features-multiViewport,multiple viewports>> section of the spec but were not reflected in the valid usage text for these functions. * Add the +<<VK_EXT_swapchain_colorspace>>+ extension defining common color spaces.
2017-01-18 04:11:25 +00:00
++++++++++++++++++++++++
=== latexmath block 49
[latexmath]
++++++++++++++++++++++++
Change log for February 10, 2017 Vulkan 1.0.40 spec update: * Bump API patch number and header version number to 40 for this update. * There is a major build change in this release. We are now using the Ruby-based ``asciidoctor'' implementation, rather than the Python-based ``asciidoc'' implementation, to process the specification. While the actual specification markup changes were minimal, this requires a new set of build tools and a very different installation process, especially because we now use an experimental direct-to-PDF backend for Asciidoctor instead of Docbook->dblatex->PDF. It is no longer possible to build the Specification using asciidoc. See doc/specs/vulkan/README.adoc for some guidance on installing the new toolchain components. * There are some minor rendering issues in the PDF output due to teething problems with the asciidoctor toolchain, especially with mathematical equations. We are aware of these and working on them. Github Issues: * Updated sample code for the <<sparsememory-examples-basic,sparse resource binding example>> (public issue 97). * Modify line and point clipping behavior in the <<vertexpostproc-clipping, Primitive Clipping>> section to allow for pop-free behavior. The ability to check for which behavior is implemented may be added a future feature or extension (public issue 113). * Unify the discussions of implicit ordering throughout the spec, in particular in the new sections <<drawing-primitive-order, Primitive Order>>, <<primrast-order, Rasterization Order>>, and <<synchronization-implicit, Implicit Synchronization Guarantees>>; the discussion of <<synchronization-submission-order, submission order>>; and references elsewhere to these sections (public issue 133). * Clarify \<\<descriptorsets-compatibility,Pipeline Layout Compatibility>> language and introduce the term ``identically defined'' (public issue 164). * Add a dependency to the +VK_EXT_debug_marker+ extension that's needed to reuse the object type enum from +VK_EXT_debug_report+, and moves the definition of that enum into +VK_EXT_debug_report+ where it should be (public issue 409). * Remove redundant valid usage statement from slink:VkImageBlit (public issue 421). * Update GL_KHR_vulkan_glsl to allow the ternary operator to result in a specialization constant (public issue 424). * Fix valid usage for flink:VkPipelineShaderStageCreateInfo (public issue 426). * Correct typo in New Objects list for <<VK_EXT_debug_report>> (public issue 447). Internal Issues: * Moved to asciidoctor for spec builds (internal issue 121). * Update style guide to describe where to put new extensions-specific asciidoc files, and what to name them (internal issue 626). * Add src/spec/indexExt.py to autogenerate registry index entries linking into the 1.0-extensions specification, instead of maintaining the index manually. (internal issue 642). * Autogenerate extension dependencies and lists of all extensions and all KHR extensions from the "supported" attributes in +vk.xml+. Execute +make config/extDependency.sh+ from +doc/specs/vulkan+ when a supported extension is added to vk.xml, to regenerate the dependency script. The consequence is that specifying a single extension to the +makeExt+ script will automatically enable all extensions it depends on as well, and that the +makeAllExts+ and +makeKHR+ scripts do not need to be updated when a new extension is supported (internal issue 648). * Put extension appendices all at the same asciidoc section level, so KHR WSI extensions show up in the HTML index (internal issue 648). Other Issues: * Imbed images in the generated HTML specs instead of loading them from the images/ directory. * Fix missing EXT in extension name (ename:VK_EXT_SWAPCHAIN_COLOR_SPACE_EXTENSION_NAME). * Add new +VK_EXT_SMPTE_2086_metadata+ extension. * In the <<platformCreateSurface_xlib,Xlib Surface>> section of the +VK_KHR_xlib_surface+ specification, add language warning users that they always need to call code:XinitThreads. * Use the term "presentable image" (rather than "swapchain image") consistently in +VK_KHR_swapchain+ and related extensions, and add a glossary term defining it. * Relocate the valid usage for samples of flink:vkGetPhysicalDeviceSparseImageFormatProperties2KHR::pname:pFormatInfo to be below the flink:VkPhysicalDeviceSparseImageFormatInfo2KHR structure.
2017-02-11 04:37:39 +00:00
\begin{aligned}
Change log for January 23, 2017 Vulkan 1.0.39 spec update: * Bump API patch number and header version number to 39 for this update. Github Issues: * Clarified that only accesses via the specified buffer/image subresource ranges are included in the access scopes (public issue 306). * Add missing valid usage statements for flink:vkCreateComputePipelines and flink:vkCreateGraphicsPipelines (public issue 427). Internal Issues: * Add a Note to the <<invariance,Invariance>> appendix about a difference between OpenGL and Vulkan with regards to how primitives derived from offsets are handled (internal issue 355). * Add the +<<VK_KHR_get_physical_device_properties2>>+, +<<VK_KHR_maintenance1>>+, and +<<VK_KHR_shader_draw_parameters>>+ extensions (internal issue 448). * Add the +<<VK_EXT_shader_subgroup_vote>>+ and +<<VK_EXT_shader_subgroup_ballot>>+ extensions (internal issue 449). * Update the texture level-of-detail equation in the <<textures-scale-factor,Scale Factor Operation>> section to better approximate the ellipse major and minor axes (internal issue 547). * Forbid non-explicitly allowed uses of interface decorations in the introduction to the <<interfaces,Shader Interfaces>> chapter (internal issue 607). * Replace use of MathJax with KaTeX, for improved load-time performance as well as avoiding the scrolling-and-scrolling behavior due to MathJax asynchronous rendering when loading at an anchor inside the spec. This change also requires moving to HTML5 output for the spec instead of XHTML, and there is a visible difference in that the chapter navigation index is now in a scrollable sidebar instead of at the top of the document. We may or may not retain the nav sidebar based on feedback (internal issue 613). * Improve consistency of markup and formatting in extension appendices (internal issue 631). Other Issues: * Add explicit valid usage statements to slink:VkImageCopy requiring that the source and destination layer ranges be contained in their respective source and destination images. * Add valid usage language for swapchain of flink:vkAcquireNextImage. If the swapchain has been replaced, then it should not be passed to flink:vkAcquireNextImage. * Add a valid usage statement to flink:vkCreateImageView, that the image must have been created with an appropriate usage bit set. * Noted that slink:VkDisplayPresentInfoKHR is a valid extension of slink:VkPresentInfoKHR in the <<wsi_swapchain,WSI Swapchain>> section. * Update valid usage for flink:vkCmdSetViewport and flink:vkCmdSetScissor to account for the multiple viewport feature. If the feature is not enabled, the parameters for these functions have required values that are defined in the <<features-features-multiViewport,multiple viewports>> section of the spec but were not reflected in the valid usage text for these functions. * Add the +<<VK_EXT_swapchain_colorspace>>+ extension defining common color spaces.
2017-01-18 04:11:25 +00:00
\tau[level_{base}][comp] &=
\begin{cases}
Change log for February 10, 2017 Vulkan 1.0.40 spec update: * Bump API patch number and header version number to 40 for this update. * There is a major build change in this release. We are now using the Ruby-based ``asciidoctor'' implementation, rather than the Python-based ``asciidoc'' implementation, to process the specification. While the actual specification markup changes were minimal, this requires a new set of build tools and a very different installation process, especially because we now use an experimental direct-to-PDF backend for Asciidoctor instead of Docbook->dblatex->PDF. It is no longer possible to build the Specification using asciidoc. See doc/specs/vulkan/README.adoc for some guidance on installing the new toolchain components. * There are some minor rendering issues in the PDF output due to teething problems with the asciidoctor toolchain, especially with mathematical equations. We are aware of these and working on them. Github Issues: * Updated sample code for the <<sparsememory-examples-basic,sparse resource binding example>> (public issue 97). * Modify line and point clipping behavior in the <<vertexpostproc-clipping, Primitive Clipping>> section to allow for pop-free behavior. The ability to check for which behavior is implemented may be added a future feature or extension (public issue 113). * Unify the discussions of implicit ordering throughout the spec, in particular in the new sections <<drawing-primitive-order, Primitive Order>>, <<primrast-order, Rasterization Order>>, and <<synchronization-implicit, Implicit Synchronization Guarantees>>; the discussion of <<synchronization-submission-order, submission order>>; and references elsewhere to these sections (public issue 133). * Clarify \<\<descriptorsets-compatibility,Pipeline Layout Compatibility>> language and introduce the term ``identically defined'' (public issue 164). * Add a dependency to the +VK_EXT_debug_marker+ extension that's needed to reuse the object type enum from +VK_EXT_debug_report+, and moves the definition of that enum into +VK_EXT_debug_report+ where it should be (public issue 409). * Remove redundant valid usage statement from slink:VkImageBlit (public issue 421). * Update GL_KHR_vulkan_glsl to allow the ternary operator to result in a specialization constant (public issue 424). * Fix valid usage for flink:VkPipelineShaderStageCreateInfo (public issue 426). * Correct typo in New Objects list for <<VK_EXT_debug_report>> (public issue 447). Internal Issues: * Moved to asciidoctor for spec builds (internal issue 121). * Update style guide to describe where to put new extensions-specific asciidoc files, and what to name them (internal issue 626). * Add src/spec/indexExt.py to autogenerate registry index entries linking into the 1.0-extensions specification, instead of maintaining the index manually. (internal issue 642). * Autogenerate extension dependencies and lists of all extensions and all KHR extensions from the "supported" attributes in +vk.xml+. Execute +make config/extDependency.sh+ from +doc/specs/vulkan+ when a supported extension is added to vk.xml, to regenerate the dependency script. The consequence is that specifying a single extension to the +makeExt+ script will automatically enable all extensions it depends on as well, and that the +makeAllExts+ and +makeKHR+ scripts do not need to be updated when a new extension is supported (internal issue 648). * Put extension appendices all at the same asciidoc section level, so KHR WSI extensions show up in the HTML index (internal issue 648). Other Issues: * Imbed images in the generated HTML specs instead of loading them from the images/ directory. * Fix missing EXT in extension name (ename:VK_EXT_SWAPCHAIN_COLOR_SPACE_EXTENSION_NAME). * Add new +VK_EXT_SMPTE_2086_metadata+ extension. * In the <<platformCreateSurface_xlib,Xlib Surface>> section of the +VK_KHR_xlib_surface+ specification, add language warning users that they always need to call code:XinitThreads. * Use the term "presentable image" (rather than "swapchain image") consistently in +VK_KHR_swapchain+ and related extensions, and add a glossary term defining it. * Relocate the valid usage for samples of flink:vkGetPhysicalDeviceSparseImageFormatProperties2KHR::pname:pFormatInfo to be below the flink:VkPhysicalDeviceSparseImageFormatInfo2KHR structure.
2017-02-11 04:37:39 +00:00
\tau[level_{base}][R], & \text{for}\ comp = 0 \\
\tau[level_{base}][G], & \text{for}\ comp = 1 \\
\tau[level_{base}][B], & \text{for}\ comp = 2 \\
\tau[level_{base}][A], & \text{for}\ comp = 3
Change log for January 23, 2017 Vulkan 1.0.39 spec update: * Bump API patch number and header version number to 39 for this update. Github Issues: * Clarified that only accesses via the specified buffer/image subresource ranges are included in the access scopes (public issue 306). * Add missing valid usage statements for flink:vkCreateComputePipelines and flink:vkCreateGraphicsPipelines (public issue 427). Internal Issues: * Add a Note to the <<invariance,Invariance>> appendix about a difference between OpenGL and Vulkan with regards to how primitives derived from offsets are handled (internal issue 355). * Add the +<<VK_KHR_get_physical_device_properties2>>+, +<<VK_KHR_maintenance1>>+, and +<<VK_KHR_shader_draw_parameters>>+ extensions (internal issue 448). * Add the +<<VK_EXT_shader_subgroup_vote>>+ and +<<VK_EXT_shader_subgroup_ballot>>+ extensions (internal issue 449). * Update the texture level-of-detail equation in the <<textures-scale-factor,Scale Factor Operation>> section to better approximate the ellipse major and minor axes (internal issue 547). * Forbid non-explicitly allowed uses of interface decorations in the introduction to the <<interfaces,Shader Interfaces>> chapter (internal issue 607). * Replace use of MathJax with KaTeX, for improved load-time performance as well as avoiding the scrolling-and-scrolling behavior due to MathJax asynchronous rendering when loading at an anchor inside the spec. This change also requires moving to HTML5 output for the spec instead of XHTML, and there is a visible difference in that the chapter navigation index is now in a scrollable sidebar instead of at the top of the document. We may or may not retain the nav sidebar based on feedback (internal issue 613). * Improve consistency of markup and formatting in extension appendices (internal issue 631). Other Issues: * Add explicit valid usage statements to slink:VkImageCopy requiring that the source and destination layer ranges be contained in their respective source and destination images. * Add valid usage language for swapchain of flink:vkAcquireNextImage. If the swapchain has been replaced, then it should not be passed to flink:vkAcquireNextImage. * Add a valid usage statement to flink:vkCreateImageView, that the image must have been created with an appropriate usage bit set. * Noted that slink:VkDisplayPresentInfoKHR is a valid extension of slink:VkPresentInfoKHR in the <<wsi_swapchain,WSI Swapchain>> section. * Update valid usage for flink:vkCmdSetViewport and flink:vkCmdSetScissor to account for the multiple viewport feature. If the feature is not enabled, the parameters for these functions have required values that are defined in the <<features-features-multiViewport,multiple viewports>> section of the spec but were not reflected in the valid usage text for these functions. * Add the +<<VK_EXT_swapchain_colorspace>>+ extension defining common color spaces.
2017-01-18 04:11:25 +00:00
\end{cases}\\
comp & \,\text{from SPIR-V operand Component}
Change log for February 10, 2017 Vulkan 1.0.40 spec update: * Bump API patch number and header version number to 40 for this update. * There is a major build change in this release. We are now using the Ruby-based ``asciidoctor'' implementation, rather than the Python-based ``asciidoc'' implementation, to process the specification. While the actual specification markup changes were minimal, this requires a new set of build tools and a very different installation process, especially because we now use an experimental direct-to-PDF backend for Asciidoctor instead of Docbook->dblatex->PDF. It is no longer possible to build the Specification using asciidoc. See doc/specs/vulkan/README.adoc for some guidance on installing the new toolchain components. * There are some minor rendering issues in the PDF output due to teething problems with the asciidoctor toolchain, especially with mathematical equations. We are aware of these and working on them. Github Issues: * Updated sample code for the <<sparsememory-examples-basic,sparse resource binding example>> (public issue 97). * Modify line and point clipping behavior in the <<vertexpostproc-clipping, Primitive Clipping>> section to allow for pop-free behavior. The ability to check for which behavior is implemented may be added a future feature or extension (public issue 113). * Unify the discussions of implicit ordering throughout the spec, in particular in the new sections <<drawing-primitive-order, Primitive Order>>, <<primrast-order, Rasterization Order>>, and <<synchronization-implicit, Implicit Synchronization Guarantees>>; the discussion of <<synchronization-submission-order, submission order>>; and references elsewhere to these sections (public issue 133). * Clarify \<\<descriptorsets-compatibility,Pipeline Layout Compatibility>> language and introduce the term ``identically defined'' (public issue 164). * Add a dependency to the +VK_EXT_debug_marker+ extension that's needed to reuse the object type enum from +VK_EXT_debug_report+, and moves the definition of that enum into +VK_EXT_debug_report+ where it should be (public issue 409). * Remove redundant valid usage statement from slink:VkImageBlit (public issue 421). * Update GL_KHR_vulkan_glsl to allow the ternary operator to result in a specialization constant (public issue 424). * Fix valid usage for flink:VkPipelineShaderStageCreateInfo (public issue 426). * Correct typo in New Objects list for <<VK_EXT_debug_report>> (public issue 447). Internal Issues: * Moved to asciidoctor for spec builds (internal issue 121). * Update style guide to describe where to put new extensions-specific asciidoc files, and what to name them (internal issue 626). * Add src/spec/indexExt.py to autogenerate registry index entries linking into the 1.0-extensions specification, instead of maintaining the index manually. (internal issue 642). * Autogenerate extension dependencies and lists of all extensions and all KHR extensions from the "supported" attributes in +vk.xml+. Execute +make config/extDependency.sh+ from +doc/specs/vulkan+ when a supported extension is added to vk.xml, to regenerate the dependency script. The consequence is that specifying a single extension to the +makeExt+ script will automatically enable all extensions it depends on as well, and that the +makeAllExts+ and +makeKHR+ scripts do not need to be updated when a new extension is supported (internal issue 648). * Put extension appendices all at the same asciidoc section level, so KHR WSI extensions show up in the HTML index (internal issue 648). Other Issues: * Imbed images in the generated HTML specs instead of loading them from the images/ directory. * Fix missing EXT in extension name (ename:VK_EXT_SWAPCHAIN_COLOR_SPACE_EXTENSION_NAME). * Add new +VK_EXT_SMPTE_2086_metadata+ extension. * In the <<platformCreateSurface_xlib,Xlib Surface>> section of the +VK_KHR_xlib_surface+ specification, add language warning users that they always need to call code:XinitThreads. * Use the term "presentable image" (rather than "swapchain image") consistently in +VK_KHR_swapchain+ and related extensions, and add a glossary term defining it. * Relocate the valid usage for samples of flink:vkGetPhysicalDeviceSparseImageFormatProperties2KHR::pname:pFormatInfo to be below the flink:VkPhysicalDeviceSparseImageFormatInfo2KHR structure.
2017-02-11 04:37:39 +00:00
\end{aligned}
Change log for January 23, 2017 Vulkan 1.0.39 spec update: * Bump API patch number and header version number to 39 for this update. Github Issues: * Clarified that only accesses via the specified buffer/image subresource ranges are included in the access scopes (public issue 306). * Add missing valid usage statements for flink:vkCreateComputePipelines and flink:vkCreateGraphicsPipelines (public issue 427). Internal Issues: * Add a Note to the <<invariance,Invariance>> appendix about a difference between OpenGL and Vulkan with regards to how primitives derived from offsets are handled (internal issue 355). * Add the +<<VK_KHR_get_physical_device_properties2>>+, +<<VK_KHR_maintenance1>>+, and +<<VK_KHR_shader_draw_parameters>>+ extensions (internal issue 448). * Add the +<<VK_EXT_shader_subgroup_vote>>+ and +<<VK_EXT_shader_subgroup_ballot>>+ extensions (internal issue 449). * Update the texture level-of-detail equation in the <<textures-scale-factor,Scale Factor Operation>> section to better approximate the ellipse major and minor axes (internal issue 547). * Forbid non-explicitly allowed uses of interface decorations in the introduction to the <<interfaces,Shader Interfaces>> chapter (internal issue 607). * Replace use of MathJax with KaTeX, for improved load-time performance as well as avoiding the scrolling-and-scrolling behavior due to MathJax asynchronous rendering when loading at an anchor inside the spec. This change also requires moving to HTML5 output for the spec instead of XHTML, and there is a visible difference in that the chapter navigation index is now in a scrollable sidebar instead of at the top of the document. We may or may not retain the nav sidebar based on feedback (internal issue 613). * Improve consistency of markup and formatting in extension appendices (internal issue 631). Other Issues: * Add explicit valid usage statements to slink:VkImageCopy requiring that the source and destination layer ranges be contained in their respective source and destination images. * Add valid usage language for swapchain of flink:vkAcquireNextImage. If the swapchain has been replaced, then it should not be passed to flink:vkAcquireNextImage. * Add a valid usage statement to flink:vkCreateImageView, that the image must have been created with an appropriate usage bit set. * Noted that slink:VkDisplayPresentInfoKHR is a valid extension of slink:VkPresentInfoKHR in the <<wsi_swapchain,WSI Swapchain>> section. * Update valid usage for flink:vkCmdSetViewport and flink:vkCmdSetScissor to account for the multiple viewport feature. If the feature is not enabled, the parameters for these functions have required values that are defined in the <<features-features-multiViewport,multiple viewports>> section of the spec but were not reflected in the valid usage text for these functions. * Add the +<<VK_EXT_swapchain_colorspace>>+ extension defining common color spaces.
2017-01-18 04:11:25 +00:00
++++++++++++++++++++++++
=== latexmath block 50
[latexmath]
++++++++++++++++++++++++
Change log for February 10, 2017 Vulkan 1.0.40 spec update: * Bump API patch number and header version number to 40 for this update. * There is a major build change in this release. We are now using the Ruby-based ``asciidoctor'' implementation, rather than the Python-based ``asciidoc'' implementation, to process the specification. While the actual specification markup changes were minimal, this requires a new set of build tools and a very different installation process, especially because we now use an experimental direct-to-PDF backend for Asciidoctor instead of Docbook->dblatex->PDF. It is no longer possible to build the Specification using asciidoc. See doc/specs/vulkan/README.adoc for some guidance on installing the new toolchain components. * There are some minor rendering issues in the PDF output due to teething problems with the asciidoctor toolchain, especially with mathematical equations. We are aware of these and working on them. Github Issues: * Updated sample code for the <<sparsememory-examples-basic,sparse resource binding example>> (public issue 97). * Modify line and point clipping behavior in the <<vertexpostproc-clipping, Primitive Clipping>> section to allow for pop-free behavior. The ability to check for which behavior is implemented may be added a future feature or extension (public issue 113). * Unify the discussions of implicit ordering throughout the spec, in particular in the new sections <<drawing-primitive-order, Primitive Order>>, <<primrast-order, Rasterization Order>>, and <<synchronization-implicit, Implicit Synchronization Guarantees>>; the discussion of <<synchronization-submission-order, submission order>>; and references elsewhere to these sections (public issue 133). * Clarify \<\<descriptorsets-compatibility,Pipeline Layout Compatibility>> language and introduce the term ``identically defined'' (public issue 164). * Add a dependency to the +VK_EXT_debug_marker+ extension that's needed to reuse the object type enum from +VK_EXT_debug_report+, and moves the definition of that enum into +VK_EXT_debug_report+ where it should be (public issue 409). * Remove redundant valid usage statement from slink:VkImageBlit (public issue 421). * Update GL_KHR_vulkan_glsl to allow the ternary operator to result in a specialization constant (public issue 424). * Fix valid usage for flink:VkPipelineShaderStageCreateInfo (public issue 426). * Correct typo in New Objects list for <<VK_EXT_debug_report>> (public issue 447). Internal Issues: * Moved to asciidoctor for spec builds (internal issue 121). * Update style guide to describe where to put new extensions-specific asciidoc files, and what to name them (internal issue 626). * Add src/spec/indexExt.py to autogenerate registry index entries linking into the 1.0-extensions specification, instead of maintaining the index manually. (internal issue 642). * Autogenerate extension dependencies and lists of all extensions and all KHR extensions from the "supported" attributes in +vk.xml+. Execute +make config/extDependency.sh+ from +doc/specs/vulkan+ when a supported extension is added to vk.xml, to regenerate the dependency script. The consequence is that specifying a single extension to the +makeExt+ script will automatically enable all extensions it depends on as well, and that the +makeAllExts+ and +makeKHR+ scripts do not need to be updated when a new extension is supported (internal issue 648). * Put extension appendices all at the same asciidoc section level, so KHR WSI extensions show up in the HTML index (internal issue 648). Other Issues: * Imbed images in the generated HTML specs instead of loading them from the images/ directory. * Fix missing EXT in extension name (ename:VK_EXT_SWAPCHAIN_COLOR_SPACE_EXTENSION_NAME). * Add new +VK_EXT_SMPTE_2086_metadata+ extension. * In the <<platformCreateSurface_xlib,Xlib Surface>> section of the +VK_KHR_xlib_surface+ specification, add language warning users that they always need to call code:XinitThreads. * Use the term "presentable image" (rather than "swapchain image") consistently in +VK_KHR_swapchain+ and related extensions, and add a glossary term defining it. * Relocate the valid usage for samples of flink:vkGetPhysicalDeviceSparseImageFormatProperties2KHR::pname:pFormatInfo to be below the flink:VkPhysicalDeviceSparseImageFormatInfo2KHR structure.
2017-02-11 04:37:39 +00:00
\begin{aligned}
Change log for January 23, 2017 Vulkan 1.0.39 spec update: * Bump API patch number and header version number to 39 for this update. Github Issues: * Clarified that only accesses via the specified buffer/image subresource ranges are included in the access scopes (public issue 306). * Add missing valid usage statements for flink:vkCreateComputePipelines and flink:vkCreateGraphicsPipelines (public issue 427). Internal Issues: * Add a Note to the <<invariance,Invariance>> appendix about a difference between OpenGL and Vulkan with regards to how primitives derived from offsets are handled (internal issue 355). * Add the +<<VK_KHR_get_physical_device_properties2>>+, +<<VK_KHR_maintenance1>>+, and +<<VK_KHR_shader_draw_parameters>>+ extensions (internal issue 448). * Add the +<<VK_EXT_shader_subgroup_vote>>+ and +<<VK_EXT_shader_subgroup_ballot>>+ extensions (internal issue 449). * Update the texture level-of-detail equation in the <<textures-scale-factor,Scale Factor Operation>> section to better approximate the ellipse major and minor axes (internal issue 547). * Forbid non-explicitly allowed uses of interface decorations in the introduction to the <<interfaces,Shader Interfaces>> chapter (internal issue 607). * Replace use of MathJax with KaTeX, for improved load-time performance as well as avoiding the scrolling-and-scrolling behavior due to MathJax asynchronous rendering when loading at an anchor inside the spec. This change also requires moving to HTML5 output for the spec instead of XHTML, and there is a visible difference in that the chapter navigation index is now in a scrollable sidebar instead of at the top of the document. We may or may not retain the nav sidebar based on feedback (internal issue 613). * Improve consistency of markup and formatting in extension appendices (internal issue 631). Other Issues: * Add explicit valid usage statements to slink:VkImageCopy requiring that the source and destination layer ranges be contained in their respective source and destination images. * Add valid usage language for swapchain of flink:vkAcquireNextImage. If the swapchain has been replaced, then it should not be passed to flink:vkAcquireNextImage. * Add a valid usage statement to flink:vkCreateImageView, that the image must have been created with an appropriate usage bit set. * Noted that slink:VkDisplayPresentInfoKHR is a valid extension of slink:VkPresentInfoKHR in the <<wsi_swapchain,WSI Swapchain>> section. * Update valid usage for flink:vkCmdSetViewport and flink:vkCmdSetScissor to account for the multiple viewport feature. If the feature is not enabled, the parameters for these functions have required values that are defined in the <<features-features-multiViewport,multiple viewports>> section of the spec but were not reflected in the valid usage text for these functions. * Add the +<<VK_EXT_swapchain_colorspace>>+ extension defining common color spaces.
2017-01-18 04:11:25 +00:00
\tau[level] &=
\begin{cases}
\tau_{ijk}[level], & \text{for 3D image} \\
\tau_{ij}[level], & \text{for 2D or Cube image} \\
\tau_{i}[level], & \text{for 1D image}
\end{cases}
Change log for February 10, 2017 Vulkan 1.0.40 spec update: * Bump API patch number and header version number to 40 for this update. * There is a major build change in this release. We are now using the Ruby-based ``asciidoctor'' implementation, rather than the Python-based ``asciidoc'' implementation, to process the specification. While the actual specification markup changes were minimal, this requires a new set of build tools and a very different installation process, especially because we now use an experimental direct-to-PDF backend for Asciidoctor instead of Docbook->dblatex->PDF. It is no longer possible to build the Specification using asciidoc. See doc/specs/vulkan/README.adoc for some guidance on installing the new toolchain components. * There are some minor rendering issues in the PDF output due to teething problems with the asciidoctor toolchain, especially with mathematical equations. We are aware of these and working on them. Github Issues: * Updated sample code for the <<sparsememory-examples-basic,sparse resource binding example>> (public issue 97). * Modify line and point clipping behavior in the <<vertexpostproc-clipping, Primitive Clipping>> section to allow for pop-free behavior. The ability to check for which behavior is implemented may be added a future feature or extension (public issue 113). * Unify the discussions of implicit ordering throughout the spec, in particular in the new sections <<drawing-primitive-order, Primitive Order>>, <<primrast-order, Rasterization Order>>, and <<synchronization-implicit, Implicit Synchronization Guarantees>>; the discussion of <<synchronization-submission-order, submission order>>; and references elsewhere to these sections (public issue 133). * Clarify \<\<descriptorsets-compatibility,Pipeline Layout Compatibility>> language and introduce the term ``identically defined'' (public issue 164). * Add a dependency to the +VK_EXT_debug_marker+ extension that's needed to reuse the object type enum from +VK_EXT_debug_report+, and moves the definition of that enum into +VK_EXT_debug_report+ where it should be (public issue 409). * Remove redundant valid usage statement from slink:VkImageBlit (public issue 421). * Update GL_KHR_vulkan_glsl to allow the ternary operator to result in a specialization constant (public issue 424). * Fix valid usage for flink:VkPipelineShaderStageCreateInfo (public issue 426). * Correct typo in New Objects list for <<VK_EXT_debug_report>> (public issue 447). Internal Issues: * Moved to asciidoctor for spec builds (internal issue 121). * Update style guide to describe where to put new extensions-specific asciidoc files, and what to name them (internal issue 626). * Add src/spec/indexExt.py to autogenerate registry index entries linking into the 1.0-extensions specification, instead of maintaining the index manually. (internal issue 642). * Autogenerate extension dependencies and lists of all extensions and all KHR extensions from the "supported" attributes in +vk.xml+. Execute +make config/extDependency.sh+ from +doc/specs/vulkan+ when a supported extension is added to vk.xml, to regenerate the dependency script. The consequence is that specifying a single extension to the +makeExt+ script will automatically enable all extensions it depends on as well, and that the +makeAllExts+ and +makeKHR+ scripts do not need to be updated when a new extension is supported (internal issue 648). * Put extension appendices all at the same asciidoc section level, so KHR WSI extensions show up in the HTML index (internal issue 648). Other Issues: * Imbed images in the generated HTML specs instead of loading them from the images/ directory. * Fix missing EXT in extension name (ename:VK_EXT_SWAPCHAIN_COLOR_SPACE_EXTENSION_NAME). * Add new +VK_EXT_SMPTE_2086_metadata+ extension. * In the <<platformCreateSurface_xlib,Xlib Surface>> section of the +VK_KHR_xlib_surface+ specification, add language warning users that they always need to call code:XinitThreads. * Use the term "presentable image" (rather than "swapchain image") consistently in +VK_KHR_swapchain+ and related extensions, and add a glossary term defining it. * Relocate the valid usage for samples of flink:vkGetPhysicalDeviceSparseImageFormatProperties2KHR::pname:pFormatInfo to be below the flink:VkPhysicalDeviceSparseImageFormatInfo2KHR structure.
2017-02-11 04:37:39 +00:00
\end{aligned}
Change log for January 23, 2017 Vulkan 1.0.39 spec update: * Bump API patch number and header version number to 39 for this update. Github Issues: * Clarified that only accesses via the specified buffer/image subresource ranges are included in the access scopes (public issue 306). * Add missing valid usage statements for flink:vkCreateComputePipelines and flink:vkCreateGraphicsPipelines (public issue 427). Internal Issues: * Add a Note to the <<invariance,Invariance>> appendix about a difference between OpenGL and Vulkan with regards to how primitives derived from offsets are handled (internal issue 355). * Add the +<<VK_KHR_get_physical_device_properties2>>+, +<<VK_KHR_maintenance1>>+, and +<<VK_KHR_shader_draw_parameters>>+ extensions (internal issue 448). * Add the +<<VK_EXT_shader_subgroup_vote>>+ and +<<VK_EXT_shader_subgroup_ballot>>+ extensions (internal issue 449). * Update the texture level-of-detail equation in the <<textures-scale-factor,Scale Factor Operation>> section to better approximate the ellipse major and minor axes (internal issue 547). * Forbid non-explicitly allowed uses of interface decorations in the introduction to the <<interfaces,Shader Interfaces>> chapter (internal issue 607). * Replace use of MathJax with KaTeX, for improved load-time performance as well as avoiding the scrolling-and-scrolling behavior due to MathJax asynchronous rendering when loading at an anchor inside the spec. This change also requires moving to HTML5 output for the spec instead of XHTML, and there is a visible difference in that the chapter navigation index is now in a scrollable sidebar instead of at the top of the document. We may or may not retain the nav sidebar based on feedback (internal issue 613). * Improve consistency of markup and formatting in extension appendices (internal issue 631). Other Issues: * Add explicit valid usage statements to slink:VkImageCopy requiring that the source and destination layer ranges be contained in their respective source and destination images. * Add valid usage language for swapchain of flink:vkAcquireNextImage. If the swapchain has been replaced, then it should not be passed to flink:vkAcquireNextImage. * Add a valid usage statement to flink:vkCreateImageView, that the image must have been created with an appropriate usage bit set. * Noted that slink:VkDisplayPresentInfoKHR is a valid extension of slink:VkPresentInfoKHR in the <<wsi_swapchain,WSI Swapchain>> section. * Update valid usage for flink:vkCmdSetViewport and flink:vkCmdSetScissor to account for the multiple viewport feature. If the feature is not enabled, the parameters for these functions have required values that are defined in the <<features-features-multiViewport,multiple viewports>> section of the spec but were not reflected in the valid usage text for these functions. * Add the +<<VK_EXT_swapchain_colorspace>>+ extension defining common color spaces.
2017-01-18 04:11:25 +00:00
++++++++++++++++++++++++
=== latexmath block 51
[latexmath]
++++++++++++++++++++++++
Change log for February 10, 2017 Vulkan 1.0.40 spec update: * Bump API patch number and header version number to 40 for this update. * There is a major build change in this release. We are now using the Ruby-based ``asciidoctor'' implementation, rather than the Python-based ``asciidoc'' implementation, to process the specification. While the actual specification markup changes were minimal, this requires a new set of build tools and a very different installation process, especially because we now use an experimental direct-to-PDF backend for Asciidoctor instead of Docbook->dblatex->PDF. It is no longer possible to build the Specification using asciidoc. See doc/specs/vulkan/README.adoc for some guidance on installing the new toolchain components. * There are some minor rendering issues in the PDF output due to teething problems with the asciidoctor toolchain, especially with mathematical equations. We are aware of these and working on them. Github Issues: * Updated sample code for the <<sparsememory-examples-basic,sparse resource binding example>> (public issue 97). * Modify line and point clipping behavior in the <<vertexpostproc-clipping, Primitive Clipping>> section to allow for pop-free behavior. The ability to check for which behavior is implemented may be added a future feature or extension (public issue 113). * Unify the discussions of implicit ordering throughout the spec, in particular in the new sections <<drawing-primitive-order, Primitive Order>>, <<primrast-order, Rasterization Order>>, and <<synchronization-implicit, Implicit Synchronization Guarantees>>; the discussion of <<synchronization-submission-order, submission order>>; and references elsewhere to these sections (public issue 133). * Clarify \<\<descriptorsets-compatibility,Pipeline Layout Compatibility>> language and introduce the term ``identically defined'' (public issue 164). * Add a dependency to the +VK_EXT_debug_marker+ extension that's needed to reuse the object type enum from +VK_EXT_debug_report+, and moves the definition of that enum into +VK_EXT_debug_report+ where it should be (public issue 409). * Remove redundant valid usage statement from slink:VkImageBlit (public issue 421). * Update GL_KHR_vulkan_glsl to allow the ternary operator to result in a specialization constant (public issue 424). * Fix valid usage for flink:VkPipelineShaderStageCreateInfo (public issue 426). * Correct typo in New Objects list for <<VK_EXT_debug_report>> (public issue 447). Internal Issues: * Moved to asciidoctor for spec builds (internal issue 121). * Update style guide to describe where to put new extensions-specific asciidoc files, and what to name them (internal issue 626). * Add src/spec/indexExt.py to autogenerate registry index entries linking into the 1.0-extensions specification, instead of maintaining the index manually. (internal issue 642). * Autogenerate extension dependencies and lists of all extensions and all KHR extensions from the "supported" attributes in +vk.xml+. Execute +make config/extDependency.sh+ from +doc/specs/vulkan+ when a supported extension is added to vk.xml, to regenerate the dependency script. The consequence is that specifying a single extension to the +makeExt+ script will automatically enable all extensions it depends on as well, and that the +makeAllExts+ and +makeKHR+ scripts do not need to be updated when a new extension is supported (internal issue 648). * Put extension appendices all at the same asciidoc section level, so KHR WSI extensions show up in the HTML index (internal issue 648). Other Issues: * Imbed images in the generated HTML specs instead of loading them from the images/ directory. * Fix missing EXT in extension name (ename:VK_EXT_SWAPCHAIN_COLOR_SPACE_EXTENSION_NAME). * Add new +VK_EXT_SMPTE_2086_metadata+ extension. * In the <<platformCreateSurface_xlib,Xlib Surface>> section of the +VK_KHR_xlib_surface+ specification, add language warning users that they always need to call code:XinitThreads. * Use the term "presentable image" (rather than "swapchain image") consistently in +VK_KHR_swapchain+ and related extensions, and add a glossary term defining it. * Relocate the valid usage for samples of flink:vkGetPhysicalDeviceSparseImageFormatProperties2KHR::pname:pFormatInfo to be below the flink:VkPhysicalDeviceSparseImageFormatInfo2KHR structure.
2017-02-11 04:37:39 +00:00
\begin{aligned}
Change log for January 23, 2017 Vulkan 1.0.39 spec update: * Bump API patch number and header version number to 39 for this update. Github Issues: * Clarified that only accesses via the specified buffer/image subresource ranges are included in the access scopes (public issue 306). * Add missing valid usage statements for flink:vkCreateComputePipelines and flink:vkCreateGraphicsPipelines (public issue 427). Internal Issues: * Add a Note to the <<invariance,Invariance>> appendix about a difference between OpenGL and Vulkan with regards to how primitives derived from offsets are handled (internal issue 355). * Add the +<<VK_KHR_get_physical_device_properties2>>+, +<<VK_KHR_maintenance1>>+, and +<<VK_KHR_shader_draw_parameters>>+ extensions (internal issue 448). * Add the +<<VK_EXT_shader_subgroup_vote>>+ and +<<VK_EXT_shader_subgroup_ballot>>+ extensions (internal issue 449). * Update the texture level-of-detail equation in the <<textures-scale-factor,Scale Factor Operation>> section to better approximate the ellipse major and minor axes (internal issue 547). * Forbid non-explicitly allowed uses of interface decorations in the introduction to the <<interfaces,Shader Interfaces>> chapter (internal issue 607). * Replace use of MathJax with KaTeX, for improved load-time performance as well as avoiding the scrolling-and-scrolling behavior due to MathJax asynchronous rendering when loading at an anchor inside the spec. This change also requires moving to HTML5 output for the spec instead of XHTML, and there is a visible difference in that the chapter navigation index is now in a scrollable sidebar instead of at the top of the document. We may or may not retain the nav sidebar based on feedback (internal issue 613). * Improve consistency of markup and formatting in extension appendices (internal issue 631). Other Issues: * Add explicit valid usage statements to slink:VkImageCopy requiring that the source and destination layer ranges be contained in their respective source and destination images. * Add valid usage language for swapchain of flink:vkAcquireNextImage. If the swapchain has been replaced, then it should not be passed to flink:vkAcquireNextImage. * Add a valid usage statement to flink:vkCreateImageView, that the image must have been created with an appropriate usage bit set. * Noted that slink:VkDisplayPresentInfoKHR is a valid extension of slink:VkPresentInfoKHR in the <<wsi_swapchain,WSI Swapchain>> section. * Update valid usage for flink:vkCmdSetViewport and flink:vkCmdSetScissor to account for the multiple viewport feature. If the feature is not enabled, the parameters for these functions have required values that are defined in the <<features-features-multiViewport,multiple viewports>> section of the spec but were not reflected in the valid usage text for these functions. * Add the +<<VK_EXT_swapchain_colorspace>>+ extension defining common color spaces.
2017-01-18 04:11:25 +00:00
\tau_{3D}[level] & = (1-\alpha)(1-\beta)(1-\gamma)\tau_{i0j0k0}[level] \\
& \, + (\alpha)(1-\beta)(1-\gamma)\tau_{i1j0k0}[level] \\
& \, + (1-\alpha)(\beta)(1-\gamma)\tau_{i0j1k0}[level] \\
& \, + (\alpha)(\beta)(1-\gamma)\tau_{i1j1k0}[level] \\
& \, + (1-\alpha)(1-\beta)(\gamma)\tau_{i0j0k1}[level] \\
& \, + (\alpha)(1-\beta)(\gamma)\tau_{i1j0k1}[level] \\
& \, + (1-\alpha)(\beta)(\gamma)\tau_{i0j1k1}[level] \\
& \, + (\alpha)(\beta)(\gamma)\tau_{i1j1k1}[level]
Change log for February 10, 2017 Vulkan 1.0.40 spec update: * Bump API patch number and header version number to 40 for this update. * There is a major build change in this release. We are now using the Ruby-based ``asciidoctor'' implementation, rather than the Python-based ``asciidoc'' implementation, to process the specification. While the actual specification markup changes were minimal, this requires a new set of build tools and a very different installation process, especially because we now use an experimental direct-to-PDF backend for Asciidoctor instead of Docbook->dblatex->PDF. It is no longer possible to build the Specification using asciidoc. See doc/specs/vulkan/README.adoc for some guidance on installing the new toolchain components. * There are some minor rendering issues in the PDF output due to teething problems with the asciidoctor toolchain, especially with mathematical equations. We are aware of these and working on them. Github Issues: * Updated sample code for the <<sparsememory-examples-basic,sparse resource binding example>> (public issue 97). * Modify line and point clipping behavior in the <<vertexpostproc-clipping, Primitive Clipping>> section to allow for pop-free behavior. The ability to check for which behavior is implemented may be added a future feature or extension (public issue 113). * Unify the discussions of implicit ordering throughout the spec, in particular in the new sections <<drawing-primitive-order, Primitive Order>>, <<primrast-order, Rasterization Order>>, and <<synchronization-implicit, Implicit Synchronization Guarantees>>; the discussion of <<synchronization-submission-order, submission order>>; and references elsewhere to these sections (public issue 133). * Clarify \<\<descriptorsets-compatibility,Pipeline Layout Compatibility>> language and introduce the term ``identically defined'' (public issue 164). * Add a dependency to the +VK_EXT_debug_marker+ extension that's needed to reuse the object type enum from +VK_EXT_debug_report+, and moves the definition of that enum into +VK_EXT_debug_report+ where it should be (public issue 409). * Remove redundant valid usage statement from slink:VkImageBlit (public issue 421). * Update GL_KHR_vulkan_glsl to allow the ternary operator to result in a specialization constant (public issue 424). * Fix valid usage for flink:VkPipelineShaderStageCreateInfo (public issue 426). * Correct typo in New Objects list for <<VK_EXT_debug_report>> (public issue 447). Internal Issues: * Moved to asciidoctor for spec builds (internal issue 121). * Update style guide to describe where to put new extensions-specific asciidoc files, and what to name them (internal issue 626). * Add src/spec/indexExt.py to autogenerate registry index entries linking into the 1.0-extensions specification, instead of maintaining the index manually. (internal issue 642). * Autogenerate extension dependencies and lists of all extensions and all KHR extensions from the "supported" attributes in +vk.xml+. Execute +make config/extDependency.sh+ from +doc/specs/vulkan+ when a supported extension is added to vk.xml, to regenerate the dependency script. The consequence is that specifying a single extension to the +makeExt+ script will automatically enable all extensions it depends on as well, and that the +makeAllExts+ and +makeKHR+ scripts do not need to be updated when a new extension is supported (internal issue 648). * Put extension appendices all at the same asciidoc section level, so KHR WSI extensions show up in the HTML index (internal issue 648). Other Issues: * Imbed images in the generated HTML specs instead of loading them from the images/ directory. * Fix missing EXT in extension name (ename:VK_EXT_SWAPCHAIN_COLOR_SPACE_EXTENSION_NAME). * Add new +VK_EXT_SMPTE_2086_metadata+ extension. * In the <<platformCreateSurface_xlib,Xlib Surface>> section of the +VK_KHR_xlib_surface+ specification, add language warning users that they always need to call code:XinitThreads. * Use the term "presentable image" (rather than "swapchain image") consistently in +VK_KHR_swapchain+ and related extensions, and add a glossary term defining it. * Relocate the valid usage for samples of flink:vkGetPhysicalDeviceSparseImageFormatProperties2KHR::pname:pFormatInfo to be below the flink:VkPhysicalDeviceSparseImageFormatInfo2KHR structure.
2017-02-11 04:37:39 +00:00
\end{aligned}
Change log for January 23, 2017 Vulkan 1.0.39 spec update: * Bump API patch number and header version number to 39 for this update. Github Issues: * Clarified that only accesses via the specified buffer/image subresource ranges are included in the access scopes (public issue 306). * Add missing valid usage statements for flink:vkCreateComputePipelines and flink:vkCreateGraphicsPipelines (public issue 427). Internal Issues: * Add a Note to the <<invariance,Invariance>> appendix about a difference between OpenGL and Vulkan with regards to how primitives derived from offsets are handled (internal issue 355). * Add the +<<VK_KHR_get_physical_device_properties2>>+, +<<VK_KHR_maintenance1>>+, and +<<VK_KHR_shader_draw_parameters>>+ extensions (internal issue 448). * Add the +<<VK_EXT_shader_subgroup_vote>>+ and +<<VK_EXT_shader_subgroup_ballot>>+ extensions (internal issue 449). * Update the texture level-of-detail equation in the <<textures-scale-factor,Scale Factor Operation>> section to better approximate the ellipse major and minor axes (internal issue 547). * Forbid non-explicitly allowed uses of interface decorations in the introduction to the <<interfaces,Shader Interfaces>> chapter (internal issue 607). * Replace use of MathJax with KaTeX, for improved load-time performance as well as avoiding the scrolling-and-scrolling behavior due to MathJax asynchronous rendering when loading at an anchor inside the spec. This change also requires moving to HTML5 output for the spec instead of XHTML, and there is a visible difference in that the chapter navigation index is now in a scrollable sidebar instead of at the top of the document. We may or may not retain the nav sidebar based on feedback (internal issue 613). * Improve consistency of markup and formatting in extension appendices (internal issue 631). Other Issues: * Add explicit valid usage statements to slink:VkImageCopy requiring that the source and destination layer ranges be contained in their respective source and destination images. * Add valid usage language for swapchain of flink:vkAcquireNextImage. If the swapchain has been replaced, then it should not be passed to flink:vkAcquireNextImage. * Add a valid usage statement to flink:vkCreateImageView, that the image must have been created with an appropriate usage bit set. * Noted that slink:VkDisplayPresentInfoKHR is a valid extension of slink:VkPresentInfoKHR in the <<wsi_swapchain,WSI Swapchain>> section. * Update valid usage for flink:vkCmdSetViewport and flink:vkCmdSetScissor to account for the multiple viewport feature. If the feature is not enabled, the parameters for these functions have required values that are defined in the <<features-features-multiViewport,multiple viewports>> section of the spec but were not reflected in the valid usage text for these functions. * Add the +<<VK_EXT_swapchain_colorspace>>+ extension defining common color spaces.
2017-01-18 04:11:25 +00:00
++++++++++++++++++++++++
=== latexmath block 52
[latexmath]
++++++++++++++++++++++++
Change log for February 10, 2017 Vulkan 1.0.40 spec update: * Bump API patch number and header version number to 40 for this update. * There is a major build change in this release. We are now using the Ruby-based ``asciidoctor'' implementation, rather than the Python-based ``asciidoc'' implementation, to process the specification. While the actual specification markup changes were minimal, this requires a new set of build tools and a very different installation process, especially because we now use an experimental direct-to-PDF backend for Asciidoctor instead of Docbook->dblatex->PDF. It is no longer possible to build the Specification using asciidoc. See doc/specs/vulkan/README.adoc for some guidance on installing the new toolchain components. * There are some minor rendering issues in the PDF output due to teething problems with the asciidoctor toolchain, especially with mathematical equations. We are aware of these and working on them. Github Issues: * Updated sample code for the <<sparsememory-examples-basic,sparse resource binding example>> (public issue 97). * Modify line and point clipping behavior in the <<vertexpostproc-clipping, Primitive Clipping>> section to allow for pop-free behavior. The ability to check for which behavior is implemented may be added a future feature or extension (public issue 113). * Unify the discussions of implicit ordering throughout the spec, in particular in the new sections <<drawing-primitive-order, Primitive Order>>, <<primrast-order, Rasterization Order>>, and <<synchronization-implicit, Implicit Synchronization Guarantees>>; the discussion of <<synchronization-submission-order, submission order>>; and references elsewhere to these sections (public issue 133). * Clarify \<\<descriptorsets-compatibility,Pipeline Layout Compatibility>> language and introduce the term ``identically defined'' (public issue 164). * Add a dependency to the +VK_EXT_debug_marker+ extension that's needed to reuse the object type enum from +VK_EXT_debug_report+, and moves the definition of that enum into +VK_EXT_debug_report+ where it should be (public issue 409). * Remove redundant valid usage statement from slink:VkImageBlit (public issue 421). * Update GL_KHR_vulkan_glsl to allow the ternary operator to result in a specialization constant (public issue 424). * Fix valid usage for flink:VkPipelineShaderStageCreateInfo (public issue 426). * Correct typo in New Objects list for <<VK_EXT_debug_report>> (public issue 447). Internal Issues: * Moved to asciidoctor for spec builds (internal issue 121). * Update style guide to describe where to put new extensions-specific asciidoc files, and what to name them (internal issue 626). * Add src/spec/indexExt.py to autogenerate registry index entries linking into the 1.0-extensions specification, instead of maintaining the index manually. (internal issue 642). * Autogenerate extension dependencies and lists of all extensions and all KHR extensions from the "supported" attributes in +vk.xml+. Execute +make config/extDependency.sh+ from +doc/specs/vulkan+ when a supported extension is added to vk.xml, to regenerate the dependency script. The consequence is that specifying a single extension to the +makeExt+ script will automatically enable all extensions it depends on as well, and that the +makeAllExts+ and +makeKHR+ scripts do not need to be updated when a new extension is supported (internal issue 648). * Put extension appendices all at the same asciidoc section level, so KHR WSI extensions show up in the HTML index (internal issue 648). Other Issues: * Imbed images in the generated HTML specs instead of loading them from the images/ directory. * Fix missing EXT in extension name (ename:VK_EXT_SWAPCHAIN_COLOR_SPACE_EXTENSION_NAME). * Add new +VK_EXT_SMPTE_2086_metadata+ extension. * In the <<platformCreateSurface_xlib,Xlib Surface>> section of the +VK_KHR_xlib_surface+ specification, add language warning users that they always need to call code:XinitThreads. * Use the term "presentable image" (rather than "swapchain image") consistently in +VK_KHR_swapchain+ and related extensions, and add a glossary term defining it. * Relocate the valid usage for samples of flink:vkGetPhysicalDeviceSparseImageFormatProperties2KHR::pname:pFormatInfo to be below the flink:VkPhysicalDeviceSparseImageFormatInfo2KHR structure.
2017-02-11 04:37:39 +00:00
\begin{aligned}
Change log for January 23, 2017 Vulkan 1.0.39 spec update: * Bump API patch number and header version number to 39 for this update. Github Issues: * Clarified that only accesses via the specified buffer/image subresource ranges are included in the access scopes (public issue 306). * Add missing valid usage statements for flink:vkCreateComputePipelines and flink:vkCreateGraphicsPipelines (public issue 427). Internal Issues: * Add a Note to the <<invariance,Invariance>> appendix about a difference between OpenGL and Vulkan with regards to how primitives derived from offsets are handled (internal issue 355). * Add the +<<VK_KHR_get_physical_device_properties2>>+, +<<VK_KHR_maintenance1>>+, and +<<VK_KHR_shader_draw_parameters>>+ extensions (internal issue 448). * Add the +<<VK_EXT_shader_subgroup_vote>>+ and +<<VK_EXT_shader_subgroup_ballot>>+ extensions (internal issue 449). * Update the texture level-of-detail equation in the <<textures-scale-factor,Scale Factor Operation>> section to better approximate the ellipse major and minor axes (internal issue 547). * Forbid non-explicitly allowed uses of interface decorations in the introduction to the <<interfaces,Shader Interfaces>> chapter (internal issue 607). * Replace use of MathJax with KaTeX, for improved load-time performance as well as avoiding the scrolling-and-scrolling behavior due to MathJax asynchronous rendering when loading at an anchor inside the spec. This change also requires moving to HTML5 output for the spec instead of XHTML, and there is a visible difference in that the chapter navigation index is now in a scrollable sidebar instead of at the top of the document. We may or may not retain the nav sidebar based on feedback (internal issue 613). * Improve consistency of markup and formatting in extension appendices (internal issue 631). Other Issues: * Add explicit valid usage statements to slink:VkImageCopy requiring that the source and destination layer ranges be contained in their respective source and destination images. * Add valid usage language for swapchain of flink:vkAcquireNextImage. If the swapchain has been replaced, then it should not be passed to flink:vkAcquireNextImage. * Add a valid usage statement to flink:vkCreateImageView, that the image must have been created with an appropriate usage bit set. * Noted that slink:VkDisplayPresentInfoKHR is a valid extension of slink:VkPresentInfoKHR in the <<wsi_swapchain,WSI Swapchain>> section. * Update valid usage for flink:vkCmdSetViewport and flink:vkCmdSetScissor to account for the multiple viewport feature. If the feature is not enabled, the parameters for these functions have required values that are defined in the <<features-features-multiViewport,multiple viewports>> section of the spec but were not reflected in the valid usage text for these functions. * Add the +<<VK_EXT_swapchain_colorspace>>+ extension defining common color spaces.
2017-01-18 04:11:25 +00:00
\tau_{2D}[level] & = (1-\alpha)(1-\beta)\tau_{i0j0}[level] \\
& \, + (\alpha)(1-\beta)\tau_{i1j0}[level] \\
& \, + (1-\alpha)(\beta)\tau_{i0j1}[level] \\
& \, + (\alpha)(\beta)\tau_{i1j1}[level]
Change log for February 10, 2017 Vulkan 1.0.40 spec update: * Bump API patch number and header version number to 40 for this update. * There is a major build change in this release. We are now using the Ruby-based ``asciidoctor'' implementation, rather than the Python-based ``asciidoc'' implementation, to process the specification. While the actual specification markup changes were minimal, this requires a new set of build tools and a very different installation process, especially because we now use an experimental direct-to-PDF backend for Asciidoctor instead of Docbook->dblatex->PDF. It is no longer possible to build the Specification using asciidoc. See doc/specs/vulkan/README.adoc for some guidance on installing the new toolchain components. * There are some minor rendering issues in the PDF output due to teething problems with the asciidoctor toolchain, especially with mathematical equations. We are aware of these and working on them. Github Issues: * Updated sample code for the <<sparsememory-examples-basic,sparse resource binding example>> (public issue 97). * Modify line and point clipping behavior in the <<vertexpostproc-clipping, Primitive Clipping>> section to allow for pop-free behavior. The ability to check for which behavior is implemented may be added a future feature or extension (public issue 113). * Unify the discussions of implicit ordering throughout the spec, in particular in the new sections <<drawing-primitive-order, Primitive Order>>, <<primrast-order, Rasterization Order>>, and <<synchronization-implicit, Implicit Synchronization Guarantees>>; the discussion of <<synchronization-submission-order, submission order>>; and references elsewhere to these sections (public issue 133). * Clarify \<\<descriptorsets-compatibility,Pipeline Layout Compatibility>> language and introduce the term ``identically defined'' (public issue 164). * Add a dependency to the +VK_EXT_debug_marker+ extension that's needed to reuse the object type enum from +VK_EXT_debug_report+, and moves the definition of that enum into +VK_EXT_debug_report+ where it should be (public issue 409). * Remove redundant valid usage statement from slink:VkImageBlit (public issue 421). * Update GL_KHR_vulkan_glsl to allow the ternary operator to result in a specialization constant (public issue 424). * Fix valid usage for flink:VkPipelineShaderStageCreateInfo (public issue 426). * Correct typo in New Objects list for <<VK_EXT_debug_report>> (public issue 447). Internal Issues: * Moved to asciidoctor for spec builds (internal issue 121). * Update style guide to describe where to put new extensions-specific asciidoc files, and what to name them (internal issue 626). * Add src/spec/indexExt.py to autogenerate registry index entries linking into the 1.0-extensions specification, instead of maintaining the index manually. (internal issue 642). * Autogenerate extension dependencies and lists of all extensions and all KHR extensions from the "supported" attributes in +vk.xml+. Execute +make config/extDependency.sh+ from +doc/specs/vulkan+ when a supported extension is added to vk.xml, to regenerate the dependency script. The consequence is that specifying a single extension to the +makeExt+ script will automatically enable all extensions it depends on as well, and that the +makeAllExts+ and +makeKHR+ scripts do not need to be updated when a new extension is supported (internal issue 648). * Put extension appendices all at the same asciidoc section level, so KHR WSI extensions show up in the HTML index (internal issue 648). Other Issues: * Imbed images in the generated HTML specs instead of loading them from the images/ directory. * Fix missing EXT in extension name (ename:VK_EXT_SWAPCHAIN_COLOR_SPACE_EXTENSION_NAME). * Add new +VK_EXT_SMPTE_2086_metadata+ extension. * In the <<platformCreateSurface_xlib,Xlib Surface>> section of the +VK_KHR_xlib_surface+ specification, add language warning users that they always need to call code:XinitThreads. * Use the term "presentable image" (rather than "swapchain image") consistently in +VK_KHR_swapchain+ and related extensions, and add a glossary term defining it. * Relocate the valid usage for samples of flink:vkGetPhysicalDeviceSparseImageFormatProperties2KHR::pname:pFormatInfo to be below the flink:VkPhysicalDeviceSparseImageFormatInfo2KHR structure.
2017-02-11 04:37:39 +00:00
\end{aligned}
Change log for January 23, 2017 Vulkan 1.0.39 spec update: * Bump API patch number and header version number to 39 for this update. Github Issues: * Clarified that only accesses via the specified buffer/image subresource ranges are included in the access scopes (public issue 306). * Add missing valid usage statements for flink:vkCreateComputePipelines and flink:vkCreateGraphicsPipelines (public issue 427). Internal Issues: * Add a Note to the <<invariance,Invariance>> appendix about a difference between OpenGL and Vulkan with regards to how primitives derived from offsets are handled (internal issue 355). * Add the +<<VK_KHR_get_physical_device_properties2>>+, +<<VK_KHR_maintenance1>>+, and +<<VK_KHR_shader_draw_parameters>>+ extensions (internal issue 448). * Add the +<<VK_EXT_shader_subgroup_vote>>+ and +<<VK_EXT_shader_subgroup_ballot>>+ extensions (internal issue 449). * Update the texture level-of-detail equation in the <<textures-scale-factor,Scale Factor Operation>> section to better approximate the ellipse major and minor axes (internal issue 547). * Forbid non-explicitly allowed uses of interface decorations in the introduction to the <<interfaces,Shader Interfaces>> chapter (internal issue 607). * Replace use of MathJax with KaTeX, for improved load-time performance as well as avoiding the scrolling-and-scrolling behavior due to MathJax asynchronous rendering when loading at an anchor inside the spec. This change also requires moving to HTML5 output for the spec instead of XHTML, and there is a visible difference in that the chapter navigation index is now in a scrollable sidebar instead of at the top of the document. We may or may not retain the nav sidebar based on feedback (internal issue 613). * Improve consistency of markup and formatting in extension appendices (internal issue 631). Other Issues: * Add explicit valid usage statements to slink:VkImageCopy requiring that the source and destination layer ranges be contained in their respective source and destination images. * Add valid usage language for swapchain of flink:vkAcquireNextImage. If the swapchain has been replaced, then it should not be passed to flink:vkAcquireNextImage. * Add a valid usage statement to flink:vkCreateImageView, that the image must have been created with an appropriate usage bit set. * Noted that slink:VkDisplayPresentInfoKHR is a valid extension of slink:VkPresentInfoKHR in the <<wsi_swapchain,WSI Swapchain>> section. * Update valid usage for flink:vkCmdSetViewport and flink:vkCmdSetScissor to account for the multiple viewport feature. If the feature is not enabled, the parameters for these functions have required values that are defined in the <<features-features-multiViewport,multiple viewports>> section of the spec but were not reflected in the valid usage text for these functions. * Add the +<<VK_EXT_swapchain_colorspace>>+ extension defining common color spaces.
2017-01-18 04:11:25 +00:00
++++++++++++++++++++++++
=== latexmath block 53
[latexmath]
++++++++++++++++++++++++
Change log for February 10, 2017 Vulkan 1.0.40 spec update: * Bump API patch number and header version number to 40 for this update. * There is a major build change in this release. We are now using the Ruby-based ``asciidoctor'' implementation, rather than the Python-based ``asciidoc'' implementation, to process the specification. While the actual specification markup changes were minimal, this requires a new set of build tools and a very different installation process, especially because we now use an experimental direct-to-PDF backend for Asciidoctor instead of Docbook->dblatex->PDF. It is no longer possible to build the Specification using asciidoc. See doc/specs/vulkan/README.adoc for some guidance on installing the new toolchain components. * There are some minor rendering issues in the PDF output due to teething problems with the asciidoctor toolchain, especially with mathematical equations. We are aware of these and working on them. Github Issues: * Updated sample code for the <<sparsememory-examples-basic,sparse resource binding example>> (public issue 97). * Modify line and point clipping behavior in the <<vertexpostproc-clipping, Primitive Clipping>> section to allow for pop-free behavior. The ability to check for which behavior is implemented may be added a future feature or extension (public issue 113). * Unify the discussions of implicit ordering throughout the spec, in particular in the new sections <<drawing-primitive-order, Primitive Order>>, <<primrast-order, Rasterization Order>>, and <<synchronization-implicit, Implicit Synchronization Guarantees>>; the discussion of <<synchronization-submission-order, submission order>>; and references elsewhere to these sections (public issue 133). * Clarify \<\<descriptorsets-compatibility,Pipeline Layout Compatibility>> language and introduce the term ``identically defined'' (public issue 164). * Add a dependency to the +VK_EXT_debug_marker+ extension that's needed to reuse the object type enum from +VK_EXT_debug_report+, and moves the definition of that enum into +VK_EXT_debug_report+ where it should be (public issue 409). * Remove redundant valid usage statement from slink:VkImageBlit (public issue 421). * Update GL_KHR_vulkan_glsl to allow the ternary operator to result in a specialization constant (public issue 424). * Fix valid usage for flink:VkPipelineShaderStageCreateInfo (public issue 426). * Correct typo in New Objects list for <<VK_EXT_debug_report>> (public issue 447). Internal Issues: * Moved to asciidoctor for spec builds (internal issue 121). * Update style guide to describe where to put new extensions-specific asciidoc files, and what to name them (internal issue 626). * Add src/spec/indexExt.py to autogenerate registry index entries linking into the 1.0-extensions specification, instead of maintaining the index manually. (internal issue 642). * Autogenerate extension dependencies and lists of all extensions and all KHR extensions from the "supported" attributes in +vk.xml+. Execute +make config/extDependency.sh+ from +doc/specs/vulkan+ when a supported extension is added to vk.xml, to regenerate the dependency script. The consequence is that specifying a single extension to the +makeExt+ script will automatically enable all extensions it depends on as well, and that the +makeAllExts+ and +makeKHR+ scripts do not need to be updated when a new extension is supported (internal issue 648). * Put extension appendices all at the same asciidoc section level, so KHR WSI extensions show up in the HTML index (internal issue 648). Other Issues: * Imbed images in the generated HTML specs instead of loading them from the images/ directory. * Fix missing EXT in extension name (ename:VK_EXT_SWAPCHAIN_COLOR_SPACE_EXTENSION_NAME). * Add new +VK_EXT_SMPTE_2086_metadata+ extension. * In the <<platformCreateSurface_xlib,Xlib Surface>> section of the +VK_KHR_xlib_surface+ specification, add language warning users that they always need to call code:XinitThreads. * Use the term "presentable image" (rather than "swapchain image") consistently in +VK_KHR_swapchain+ and related extensions, and add a glossary term defining it. * Relocate the valid usage for samples of flink:vkGetPhysicalDeviceSparseImageFormatProperties2KHR::pname:pFormatInfo to be below the flink:VkPhysicalDeviceSparseImageFormatInfo2KHR structure.
2017-02-11 04:37:39 +00:00
\begin{aligned}
Change log for January 23, 2017 Vulkan 1.0.39 spec update: * Bump API patch number and header version number to 39 for this update. Github Issues: * Clarified that only accesses via the specified buffer/image subresource ranges are included in the access scopes (public issue 306). * Add missing valid usage statements for flink:vkCreateComputePipelines and flink:vkCreateGraphicsPipelines (public issue 427). Internal Issues: * Add a Note to the <<invariance,Invariance>> appendix about a difference between OpenGL and Vulkan with regards to how primitives derived from offsets are handled (internal issue 355). * Add the +<<VK_KHR_get_physical_device_properties2>>+, +<<VK_KHR_maintenance1>>+, and +<<VK_KHR_shader_draw_parameters>>+ extensions (internal issue 448). * Add the +<<VK_EXT_shader_subgroup_vote>>+ and +<<VK_EXT_shader_subgroup_ballot>>+ extensions (internal issue 449). * Update the texture level-of-detail equation in the <<textures-scale-factor,Scale Factor Operation>> section to better approximate the ellipse major and minor axes (internal issue 547). * Forbid non-explicitly allowed uses of interface decorations in the introduction to the <<interfaces,Shader Interfaces>> chapter (internal issue 607). * Replace use of MathJax with KaTeX, for improved load-time performance as well as avoiding the scrolling-and-scrolling behavior due to MathJax asynchronous rendering when loading at an anchor inside the spec. This change also requires moving to HTML5 output for the spec instead of XHTML, and there is a visible difference in that the chapter navigation index is now in a scrollable sidebar instead of at the top of the document. We may or may not retain the nav sidebar based on feedback (internal issue 613). * Improve consistency of markup and formatting in extension appendices (internal issue 631). Other Issues: * Add explicit valid usage statements to slink:VkImageCopy requiring that the source and destination layer ranges be contained in their respective source and destination images. * Add valid usage language for swapchain of flink:vkAcquireNextImage. If the swapchain has been replaced, then it should not be passed to flink:vkAcquireNextImage. * Add a valid usage statement to flink:vkCreateImageView, that the image must have been created with an appropriate usage bit set. * Noted that slink:VkDisplayPresentInfoKHR is a valid extension of slink:VkPresentInfoKHR in the <<wsi_swapchain,WSI Swapchain>> section. * Update valid usage for flink:vkCmdSetViewport and flink:vkCmdSetScissor to account for the multiple viewport feature. If the feature is not enabled, the parameters for these functions have required values that are defined in the <<features-features-multiViewport,multiple viewports>> section of the spec but were not reflected in the valid usage text for these functions. * Add the +<<VK_EXT_swapchain_colorspace>>+ extension defining common color spaces.
2017-01-18 04:11:25 +00:00
\tau_{1D}[level] & = (1-\alpha)\tau_{i0}[level] \\
& \, + (\alpha)\tau_{i1}[level]
Change log for February 10, 2017 Vulkan 1.0.40 spec update: * Bump API patch number and header version number to 40 for this update. * There is a major build change in this release. We are now using the Ruby-based ``asciidoctor'' implementation, rather than the Python-based ``asciidoc'' implementation, to process the specification. While the actual specification markup changes were minimal, this requires a new set of build tools and a very different installation process, especially because we now use an experimental direct-to-PDF backend for Asciidoctor instead of Docbook->dblatex->PDF. It is no longer possible to build the Specification using asciidoc. See doc/specs/vulkan/README.adoc for some guidance on installing the new toolchain components. * There are some minor rendering issues in the PDF output due to teething problems with the asciidoctor toolchain, especially with mathematical equations. We are aware of these and working on them. Github Issues: * Updated sample code for the <<sparsememory-examples-basic,sparse resource binding example>> (public issue 97). * Modify line and point clipping behavior in the <<vertexpostproc-clipping, Primitive Clipping>> section to allow for pop-free behavior. The ability to check for which behavior is implemented may be added a future feature or extension (public issue 113). * Unify the discussions of implicit ordering throughout the spec, in particular in the new sections <<drawing-primitive-order, Primitive Order>>, <<primrast-order, Rasterization Order>>, and <<synchronization-implicit, Implicit Synchronization Guarantees>>; the discussion of <<synchronization-submission-order, submission order>>; and references elsewhere to these sections (public issue 133). * Clarify \<\<descriptorsets-compatibility,Pipeline Layout Compatibility>> language and introduce the term ``identically defined'' (public issue 164). * Add a dependency to the +VK_EXT_debug_marker+ extension that's needed to reuse the object type enum from +VK_EXT_debug_report+, and moves the definition of that enum into +VK_EXT_debug_report+ where it should be (public issue 409). * Remove redundant valid usage statement from slink:VkImageBlit (public issue 421). * Update GL_KHR_vulkan_glsl to allow the ternary operator to result in a specialization constant (public issue 424). * Fix valid usage for flink:VkPipelineShaderStageCreateInfo (public issue 426). * Correct typo in New Objects list for <<VK_EXT_debug_report>> (public issue 447). Internal Issues: * Moved to asciidoctor for spec builds (internal issue 121). * Update style guide to describe where to put new extensions-specific asciidoc files, and what to name them (internal issue 626). * Add src/spec/indexExt.py to autogenerate registry index entries linking into the 1.0-extensions specification, instead of maintaining the index manually. (internal issue 642). * Autogenerate extension dependencies and lists of all extensions and all KHR extensions from the "supported" attributes in +vk.xml+. Execute +make config/extDependency.sh+ from +doc/specs/vulkan+ when a supported extension is added to vk.xml, to regenerate the dependency script. The consequence is that specifying a single extension to the +makeExt+ script will automatically enable all extensions it depends on as well, and that the +makeAllExts+ and +makeKHR+ scripts do not need to be updated when a new extension is supported (internal issue 648). * Put extension appendices all at the same asciidoc section level, so KHR WSI extensions show up in the HTML index (internal issue 648). Other Issues: * Imbed images in the generated HTML specs instead of loading them from the images/ directory. * Fix missing EXT in extension name (ename:VK_EXT_SWAPCHAIN_COLOR_SPACE_EXTENSION_NAME). * Add new +VK_EXT_SMPTE_2086_metadata+ extension. * In the <<platformCreateSurface_xlib,Xlib Surface>> section of the +VK_KHR_xlib_surface+ specification, add language warning users that they always need to call code:XinitThreads. * Use the term "presentable image" (rather than "swapchain image") consistently in +VK_KHR_swapchain+ and related extensions, and add a glossary term defining it. * Relocate the valid usage for samples of flink:vkGetPhysicalDeviceSparseImageFormatProperties2KHR::pname:pFormatInfo to be below the flink:VkPhysicalDeviceSparseImageFormatInfo2KHR structure.
2017-02-11 04:37:39 +00:00
\end{aligned}
Change log for January 23, 2017 Vulkan 1.0.39 spec update: * Bump API patch number and header version number to 39 for this update. Github Issues: * Clarified that only accesses via the specified buffer/image subresource ranges are included in the access scopes (public issue 306). * Add missing valid usage statements for flink:vkCreateComputePipelines and flink:vkCreateGraphicsPipelines (public issue 427). Internal Issues: * Add a Note to the <<invariance,Invariance>> appendix about a difference between OpenGL and Vulkan with regards to how primitives derived from offsets are handled (internal issue 355). * Add the +<<VK_KHR_get_physical_device_properties2>>+, +<<VK_KHR_maintenance1>>+, and +<<VK_KHR_shader_draw_parameters>>+ extensions (internal issue 448). * Add the +<<VK_EXT_shader_subgroup_vote>>+ and +<<VK_EXT_shader_subgroup_ballot>>+ extensions (internal issue 449). * Update the texture level-of-detail equation in the <<textures-scale-factor,Scale Factor Operation>> section to better approximate the ellipse major and minor axes (internal issue 547). * Forbid non-explicitly allowed uses of interface decorations in the introduction to the <<interfaces,Shader Interfaces>> chapter (internal issue 607). * Replace use of MathJax with KaTeX, for improved load-time performance as well as avoiding the scrolling-and-scrolling behavior due to MathJax asynchronous rendering when loading at an anchor inside the spec. This change also requires moving to HTML5 output for the spec instead of XHTML, and there is a visible difference in that the chapter navigation index is now in a scrollable sidebar instead of at the top of the document. We may or may not retain the nav sidebar based on feedback (internal issue 613). * Improve consistency of markup and formatting in extension appendices (internal issue 631). Other Issues: * Add explicit valid usage statements to slink:VkImageCopy requiring that the source and destination layer ranges be contained in their respective source and destination images. * Add valid usage language for swapchain of flink:vkAcquireNextImage. If the swapchain has been replaced, then it should not be passed to flink:vkAcquireNextImage. * Add a valid usage statement to flink:vkCreateImageView, that the image must have been created with an appropriate usage bit set. * Noted that slink:VkDisplayPresentInfoKHR is a valid extension of slink:VkPresentInfoKHR in the <<wsi_swapchain,WSI Swapchain>> section. * Update valid usage for flink:vkCmdSetViewport and flink:vkCmdSetScissor to account for the multiple viewport feature. If the feature is not enabled, the parameters for these functions have required values that are defined in the <<features-features-multiViewport,multiple viewports>> section of the spec but were not reflected in the valid usage text for these functions. * Add the +<<VK_EXT_swapchain_colorspace>>+ extension defining common color spaces.
2017-01-18 04:11:25 +00:00
++++++++++++++++++++++++
=== latexmath block 54
[latexmath]
++++++++++++++++++++++++
Change log for February 10, 2017 Vulkan 1.0.40 spec update: * Bump API patch number and header version number to 40 for this update. * There is a major build change in this release. We are now using the Ruby-based ``asciidoctor'' implementation, rather than the Python-based ``asciidoc'' implementation, to process the specification. While the actual specification markup changes were minimal, this requires a new set of build tools and a very different installation process, especially because we now use an experimental direct-to-PDF backend for Asciidoctor instead of Docbook->dblatex->PDF. It is no longer possible to build the Specification using asciidoc. See doc/specs/vulkan/README.adoc for some guidance on installing the new toolchain components. * There are some minor rendering issues in the PDF output due to teething problems with the asciidoctor toolchain, especially with mathematical equations. We are aware of these and working on them. Github Issues: * Updated sample code for the <<sparsememory-examples-basic,sparse resource binding example>> (public issue 97). * Modify line and point clipping behavior in the <<vertexpostproc-clipping, Primitive Clipping>> section to allow for pop-free behavior. The ability to check for which behavior is implemented may be added a future feature or extension (public issue 113). * Unify the discussions of implicit ordering throughout the spec, in particular in the new sections <<drawing-primitive-order, Primitive Order>>, <<primrast-order, Rasterization Order>>, and <<synchronization-implicit, Implicit Synchronization Guarantees>>; the discussion of <<synchronization-submission-order, submission order>>; and references elsewhere to these sections (public issue 133). * Clarify \<\<descriptorsets-compatibility,Pipeline Layout Compatibility>> language and introduce the term ``identically defined'' (public issue 164). * Add a dependency to the +VK_EXT_debug_marker+ extension that's needed to reuse the object type enum from +VK_EXT_debug_report+, and moves the definition of that enum into +VK_EXT_debug_report+ where it should be (public issue 409). * Remove redundant valid usage statement from slink:VkImageBlit (public issue 421). * Update GL_KHR_vulkan_glsl to allow the ternary operator to result in a specialization constant (public issue 424). * Fix valid usage for flink:VkPipelineShaderStageCreateInfo (public issue 426). * Correct typo in New Objects list for <<VK_EXT_debug_report>> (public issue 447). Internal Issues: * Moved to asciidoctor for spec builds (internal issue 121). * Update style guide to describe where to put new extensions-specific asciidoc files, and what to name them (internal issue 626). * Add src/spec/indexExt.py to autogenerate registry index entries linking into the 1.0-extensions specification, instead of maintaining the index manually. (internal issue 642). * Autogenerate extension dependencies and lists of all extensions and all KHR extensions from the "supported" attributes in +vk.xml+. Execute +make config/extDependency.sh+ from +doc/specs/vulkan+ when a supported extension is added to vk.xml, to regenerate the dependency script. The consequence is that specifying a single extension to the +makeExt+ script will automatically enable all extensions it depends on as well, and that the +makeAllExts+ and +makeKHR+ scripts do not need to be updated when a new extension is supported (internal issue 648). * Put extension appendices all at the same asciidoc section level, so KHR WSI extensions show up in the HTML index (internal issue 648). Other Issues: * Imbed images in the generated HTML specs instead of loading them from the images/ directory. * Fix missing EXT in extension name (ename:VK_EXT_SWAPCHAIN_COLOR_SPACE_EXTENSION_NAME). * Add new +VK_EXT_SMPTE_2086_metadata+ extension. * In the <<platformCreateSurface_xlib,Xlib Surface>> section of the +VK_KHR_xlib_surface+ specification, add language warning users that they always need to call code:XinitThreads. * Use the term "presentable image" (rather than "swapchain image") consistently in +VK_KHR_swapchain+ and related extensions, and add a glossary term defining it. * Relocate the valid usage for samples of flink:vkGetPhysicalDeviceSparseImageFormatProperties2KHR::pname:pFormatInfo to be below the flink:VkPhysicalDeviceSparseImageFormatInfo2KHR structure.
2017-02-11 04:37:39 +00:00
\begin{aligned}
Change log for January 23, 2017 Vulkan 1.0.39 spec update: * Bump API patch number and header version number to 39 for this update. Github Issues: * Clarified that only accesses via the specified buffer/image subresource ranges are included in the access scopes (public issue 306). * Add missing valid usage statements for flink:vkCreateComputePipelines and flink:vkCreateGraphicsPipelines (public issue 427). Internal Issues: * Add a Note to the <<invariance,Invariance>> appendix about a difference between OpenGL and Vulkan with regards to how primitives derived from offsets are handled (internal issue 355). * Add the +<<VK_KHR_get_physical_device_properties2>>+, +<<VK_KHR_maintenance1>>+, and +<<VK_KHR_shader_draw_parameters>>+ extensions (internal issue 448). * Add the +<<VK_EXT_shader_subgroup_vote>>+ and +<<VK_EXT_shader_subgroup_ballot>>+ extensions (internal issue 449). * Update the texture level-of-detail equation in the <<textures-scale-factor,Scale Factor Operation>> section to better approximate the ellipse major and minor axes (internal issue 547). * Forbid non-explicitly allowed uses of interface decorations in the introduction to the <<interfaces,Shader Interfaces>> chapter (internal issue 607). * Replace use of MathJax with KaTeX, for improved load-time performance as well as avoiding the scrolling-and-scrolling behavior due to MathJax asynchronous rendering when loading at an anchor inside the spec. This change also requires moving to HTML5 output for the spec instead of XHTML, and there is a visible difference in that the chapter navigation index is now in a scrollable sidebar instead of at the top of the document. We may or may not retain the nav sidebar based on feedback (internal issue 613). * Improve consistency of markup and formatting in extension appendices (internal issue 631). Other Issues: * Add explicit valid usage statements to slink:VkImageCopy requiring that the source and destination layer ranges be contained in their respective source and destination images. * Add valid usage language for swapchain of flink:vkAcquireNextImage. If the swapchain has been replaced, then it should not be passed to flink:vkAcquireNextImage. * Add a valid usage statement to flink:vkCreateImageView, that the image must have been created with an appropriate usage bit set. * Noted that slink:VkDisplayPresentInfoKHR is a valid extension of slink:VkPresentInfoKHR in the <<wsi_swapchain,WSI Swapchain>> section. * Update valid usage for flink:vkCmdSetViewport and flink:vkCmdSetScissor to account for the multiple viewport feature. If the feature is not enabled, the parameters for these functions have required values that are defined in the <<features-features-multiViewport,multiple viewports>> section of the spec but were not reflected in the valid usage text for these functions. * Add the +<<VK_EXT_swapchain_colorspace>>+ extension defining common color spaces.
2017-01-18 04:11:25 +00:00
\tau[level] &=
\begin{cases}
\tau_{3D}[level], & \text{for 3D image} \\
\tau_{2D}[level], & \text{for 2D or Cube image} \\
\tau_{1D}[level], & \text{for 1D image}
\end{cases}
Change log for February 10, 2017 Vulkan 1.0.40 spec update: * Bump API patch number and header version number to 40 for this update. * There is a major build change in this release. We are now using the Ruby-based ``asciidoctor'' implementation, rather than the Python-based ``asciidoc'' implementation, to process the specification. While the actual specification markup changes were minimal, this requires a new set of build tools and a very different installation process, especially because we now use an experimental direct-to-PDF backend for Asciidoctor instead of Docbook->dblatex->PDF. It is no longer possible to build the Specification using asciidoc. See doc/specs/vulkan/README.adoc for some guidance on installing the new toolchain components. * There are some minor rendering issues in the PDF output due to teething problems with the asciidoctor toolchain, especially with mathematical equations. We are aware of these and working on them. Github Issues: * Updated sample code for the <<sparsememory-examples-basic,sparse resource binding example>> (public issue 97). * Modify line and point clipping behavior in the <<vertexpostproc-clipping, Primitive Clipping>> section to allow for pop-free behavior. The ability to check for which behavior is implemented may be added a future feature or extension (public issue 113). * Unify the discussions of implicit ordering throughout the spec, in particular in the new sections <<drawing-primitive-order, Primitive Order>>, <<primrast-order, Rasterization Order>>, and <<synchronization-implicit, Implicit Synchronization Guarantees>>; the discussion of <<synchronization-submission-order, submission order>>; and references elsewhere to these sections (public issue 133). * Clarify \<\<descriptorsets-compatibility,Pipeline Layout Compatibility>> language and introduce the term ``identically defined'' (public issue 164). * Add a dependency to the +VK_EXT_debug_marker+ extension that's needed to reuse the object type enum from +VK_EXT_debug_report+, and moves the definition of that enum into +VK_EXT_debug_report+ where it should be (public issue 409). * Remove redundant valid usage statement from slink:VkImageBlit (public issue 421). * Update GL_KHR_vulkan_glsl to allow the ternary operator to result in a specialization constant (public issue 424). * Fix valid usage for flink:VkPipelineShaderStageCreateInfo (public issue 426). * Correct typo in New Objects list for <<VK_EXT_debug_report>> (public issue 447). Internal Issues: * Moved to asciidoctor for spec builds (internal issue 121). * Update style guide to describe where to put new extensions-specific asciidoc files, and what to name them (internal issue 626). * Add src/spec/indexExt.py to autogenerate registry index entries linking into the 1.0-extensions specification, instead of maintaining the index manually. (internal issue 642). * Autogenerate extension dependencies and lists of all extensions and all KHR extensions from the "supported" attributes in +vk.xml+. Execute +make config/extDependency.sh+ from +doc/specs/vulkan+ when a supported extension is added to vk.xml, to regenerate the dependency script. The consequence is that specifying a single extension to the +makeExt+ script will automatically enable all extensions it depends on as well, and that the +makeAllExts+ and +makeKHR+ scripts do not need to be updated when a new extension is supported (internal issue 648). * Put extension appendices all at the same asciidoc section level, so KHR WSI extensions show up in the HTML index (internal issue 648). Other Issues: * Imbed images in the generated HTML specs instead of loading them from the images/ directory. * Fix missing EXT in extension name (ename:VK_EXT_SWAPCHAIN_COLOR_SPACE_EXTENSION_NAME). * Add new +VK_EXT_SMPTE_2086_metadata+ extension. * In the <<platformCreateSurface_xlib,Xlib Surface>> section of the +VK_KHR_xlib_surface+ specification, add language warning users that they always need to call code:XinitThreads. * Use the term "presentable image" (rather than "swapchain image") consistently in +VK_KHR_swapchain+ and related extensions, and add a glossary term defining it. * Relocate the valid usage for samples of flink:vkGetPhysicalDeviceSparseImageFormatProperties2KHR::pname:pFormatInfo to be below the flink:VkPhysicalDeviceSparseImageFormatInfo2KHR structure.
2017-02-11 04:37:39 +00:00
\end{aligned}
Change log for January 23, 2017 Vulkan 1.0.39 spec update: * Bump API patch number and header version number to 39 for this update. Github Issues: * Clarified that only accesses via the specified buffer/image subresource ranges are included in the access scopes (public issue 306). * Add missing valid usage statements for flink:vkCreateComputePipelines and flink:vkCreateGraphicsPipelines (public issue 427). Internal Issues: * Add a Note to the <<invariance,Invariance>> appendix about a difference between OpenGL and Vulkan with regards to how primitives derived from offsets are handled (internal issue 355). * Add the +<<VK_KHR_get_physical_device_properties2>>+, +<<VK_KHR_maintenance1>>+, and +<<VK_KHR_shader_draw_parameters>>+ extensions (internal issue 448). * Add the +<<VK_EXT_shader_subgroup_vote>>+ and +<<VK_EXT_shader_subgroup_ballot>>+ extensions (internal issue 449). * Update the texture level-of-detail equation in the <<textures-scale-factor,Scale Factor Operation>> section to better approximate the ellipse major and minor axes (internal issue 547). * Forbid non-explicitly allowed uses of interface decorations in the introduction to the <<interfaces,Shader Interfaces>> chapter (internal issue 607). * Replace use of MathJax with KaTeX, for improved load-time performance as well as avoiding the scrolling-and-scrolling behavior due to MathJax asynchronous rendering when loading at an anchor inside the spec. This change also requires moving to HTML5 output for the spec instead of XHTML, and there is a visible difference in that the chapter navigation index is now in a scrollable sidebar instead of at the top of the document. We may or may not retain the nav sidebar based on feedback (internal issue 613). * Improve consistency of markup and formatting in extension appendices (internal issue 631). Other Issues: * Add explicit valid usage statements to slink:VkImageCopy requiring that the source and destination layer ranges be contained in their respective source and destination images. * Add valid usage language for swapchain of flink:vkAcquireNextImage. If the swapchain has been replaced, then it should not be passed to flink:vkAcquireNextImage. * Add a valid usage statement to flink:vkCreateImageView, that the image must have been created with an appropriate usage bit set. * Noted that slink:VkDisplayPresentInfoKHR is a valid extension of slink:VkPresentInfoKHR in the <<wsi_swapchain,WSI Swapchain>> section. * Update valid usage for flink:vkCmdSetViewport and flink:vkCmdSetScissor to account for the multiple viewport feature. If the feature is not enabled, the parameters for these functions have required values that are defined in the <<features-features-multiViewport,multiple viewports>> section of the spec but were not reflected in the valid usage text for these functions. * Add the +<<VK_EXT_swapchain_colorspace>>+ extension defining common color spaces.
2017-01-18 04:11:25 +00:00
++++++++++++++++++++++++
=== latexmath block 55
[latexmath]
++++++++++++++++++++++++
Change log for February 10, 2017 Vulkan 1.0.40 spec update: * Bump API patch number and header version number to 40 for this update. * There is a major build change in this release. We are now using the Ruby-based ``asciidoctor'' implementation, rather than the Python-based ``asciidoc'' implementation, to process the specification. While the actual specification markup changes were minimal, this requires a new set of build tools and a very different installation process, especially because we now use an experimental direct-to-PDF backend for Asciidoctor instead of Docbook->dblatex->PDF. It is no longer possible to build the Specification using asciidoc. See doc/specs/vulkan/README.adoc for some guidance on installing the new toolchain components. * There are some minor rendering issues in the PDF output due to teething problems with the asciidoctor toolchain, especially with mathematical equations. We are aware of these and working on them. Github Issues: * Updated sample code for the <<sparsememory-examples-basic,sparse resource binding example>> (public issue 97). * Modify line and point clipping behavior in the <<vertexpostproc-clipping, Primitive Clipping>> section to allow for pop-free behavior. The ability to check for which behavior is implemented may be added a future feature or extension (public issue 113). * Unify the discussions of implicit ordering throughout the spec, in particular in the new sections <<drawing-primitive-order, Primitive Order>>, <<primrast-order, Rasterization Order>>, and <<synchronization-implicit, Implicit Synchronization Guarantees>>; the discussion of <<synchronization-submission-order, submission order>>; and references elsewhere to these sections (public issue 133). * Clarify \<\<descriptorsets-compatibility,Pipeline Layout Compatibility>> language and introduce the term ``identically defined'' (public issue 164). * Add a dependency to the +VK_EXT_debug_marker+ extension that's needed to reuse the object type enum from +VK_EXT_debug_report+, and moves the definition of that enum into +VK_EXT_debug_report+ where it should be (public issue 409). * Remove redundant valid usage statement from slink:VkImageBlit (public issue 421). * Update GL_KHR_vulkan_glsl to allow the ternary operator to result in a specialization constant (public issue 424). * Fix valid usage for flink:VkPipelineShaderStageCreateInfo (public issue 426). * Correct typo in New Objects list for <<VK_EXT_debug_report>> (public issue 447). Internal Issues: * Moved to asciidoctor for spec builds (internal issue 121). * Update style guide to describe where to put new extensions-specific asciidoc files, and what to name them (internal issue 626). * Add src/spec/indexExt.py to autogenerate registry index entries linking into the 1.0-extensions specification, instead of maintaining the index manually. (internal issue 642). * Autogenerate extension dependencies and lists of all extensions and all KHR extensions from the "supported" attributes in +vk.xml+. Execute +make config/extDependency.sh+ from +doc/specs/vulkan+ when a supported extension is added to vk.xml, to regenerate the dependency script. The consequence is that specifying a single extension to the +makeExt+ script will automatically enable all extensions it depends on as well, and that the +makeAllExts+ and +makeKHR+ scripts do not need to be updated when a new extension is supported (internal issue 648). * Put extension appendices all at the same asciidoc section level, so KHR WSI extensions show up in the HTML index (internal issue 648). Other Issues: * Imbed images in the generated HTML specs instead of loading them from the images/ directory. * Fix missing EXT in extension name (ename:VK_EXT_SWAPCHAIN_COLOR_SPACE_EXTENSION_NAME). * Add new +VK_EXT_SMPTE_2086_metadata+ extension. * In the <<platformCreateSurface_xlib,Xlib Surface>> section of the +VK_KHR_xlib_surface+ specification, add language warning users that they always need to call code:XinitThreads. * Use the term "presentable image" (rather than "swapchain image") consistently in +VK_KHR_swapchain+ and related extensions, and add a glossary term defining it. * Relocate the valid usage for samples of flink:vkGetPhysicalDeviceSparseImageFormatProperties2KHR::pname:pFormatInfo to be below the flink:VkPhysicalDeviceSparseImageFormatInfo2KHR structure.
2017-02-11 04:37:39 +00:00
\begin{aligned}
Change log for January 23, 2017 Vulkan 1.0.39 spec update: * Bump API patch number and header version number to 39 for this update. Github Issues: * Clarified that only accesses via the specified buffer/image subresource ranges are included in the access scopes (public issue 306). * Add missing valid usage statements for flink:vkCreateComputePipelines and flink:vkCreateGraphicsPipelines (public issue 427). Internal Issues: * Add a Note to the <<invariance,Invariance>> appendix about a difference between OpenGL and Vulkan with regards to how primitives derived from offsets are handled (internal issue 355). * Add the +<<VK_KHR_get_physical_device_properties2>>+, +<<VK_KHR_maintenance1>>+, and +<<VK_KHR_shader_draw_parameters>>+ extensions (internal issue 448). * Add the +<<VK_EXT_shader_subgroup_vote>>+ and +<<VK_EXT_shader_subgroup_ballot>>+ extensions (internal issue 449). * Update the texture level-of-detail equation in the <<textures-scale-factor,Scale Factor Operation>> section to better approximate the ellipse major and minor axes (internal issue 547). * Forbid non-explicitly allowed uses of interface decorations in the introduction to the <<interfaces,Shader Interfaces>> chapter (internal issue 607). * Replace use of MathJax with KaTeX, for improved load-time performance as well as avoiding the scrolling-and-scrolling behavior due to MathJax asynchronous rendering when loading at an anchor inside the spec. This change also requires moving to HTML5 output for the spec instead of XHTML, and there is a visible difference in that the chapter navigation index is now in a scrollable sidebar instead of at the top of the document. We may or may not retain the nav sidebar based on feedback (internal issue 613). * Improve consistency of markup and formatting in extension appendices (internal issue 631). Other Issues: * Add explicit valid usage statements to slink:VkImageCopy requiring that the source and destination layer ranges be contained in their respective source and destination images. * Add valid usage language for swapchain of flink:vkAcquireNextImage. If the swapchain has been replaced, then it should not be passed to flink:vkAcquireNextImage. * Add a valid usage statement to flink:vkCreateImageView, that the image must have been created with an appropriate usage bit set. * Noted that slink:VkDisplayPresentInfoKHR is a valid extension of slink:VkPresentInfoKHR in the <<wsi_swapchain,WSI Swapchain>> section. * Update valid usage for flink:vkCmdSetViewport and flink:vkCmdSetScissor to account for the multiple viewport feature. If the feature is not enabled, the parameters for these functions have required values that are defined in the <<features-features-multiViewport,multiple viewports>> section of the spec but were not reflected in the valid usage text for these functions. * Add the +<<VK_EXT_swapchain_colorspace>>+ extension defining common color spaces.
2017-01-18 04:11:25 +00:00
\tau &=
\begin{cases}
\tau[d], & \text{for mip mode BASE or NEAREST} \\
(1-\delta)\tau[d_{hi}]+\delta\tau[d_{lo}], & \text{for mip mode LINEAR}
\end{cases}
Change log for February 10, 2017 Vulkan 1.0.40 spec update: * Bump API patch number and header version number to 40 for this update. * There is a major build change in this release. We are now using the Ruby-based ``asciidoctor'' implementation, rather than the Python-based ``asciidoc'' implementation, to process the specification. While the actual specification markup changes were minimal, this requires a new set of build tools and a very different installation process, especially because we now use an experimental direct-to-PDF backend for Asciidoctor instead of Docbook->dblatex->PDF. It is no longer possible to build the Specification using asciidoc. See doc/specs/vulkan/README.adoc for some guidance on installing the new toolchain components. * There are some minor rendering issues in the PDF output due to teething problems with the asciidoctor toolchain, especially with mathematical equations. We are aware of these and working on them. Github Issues: * Updated sample code for the <<sparsememory-examples-basic,sparse resource binding example>> (public issue 97). * Modify line and point clipping behavior in the <<vertexpostproc-clipping, Primitive Clipping>> section to allow for pop-free behavior. The ability to check for which behavior is implemented may be added a future feature or extension (public issue 113). * Unify the discussions of implicit ordering throughout the spec, in particular in the new sections <<drawing-primitive-order, Primitive Order>>, <<primrast-order, Rasterization Order>>, and <<synchronization-implicit, Implicit Synchronization Guarantees>>; the discussion of <<synchronization-submission-order, submission order>>; and references elsewhere to these sections (public issue 133). * Clarify \<\<descriptorsets-compatibility,Pipeline Layout Compatibility>> language and introduce the term ``identically defined'' (public issue 164). * Add a dependency to the +VK_EXT_debug_marker+ extension that's needed to reuse the object type enum from +VK_EXT_debug_report+, and moves the definition of that enum into +VK_EXT_debug_report+ where it should be (public issue 409). * Remove redundant valid usage statement from slink:VkImageBlit (public issue 421). * Update GL_KHR_vulkan_glsl to allow the ternary operator to result in a specialization constant (public issue 424). * Fix valid usage for flink:VkPipelineShaderStageCreateInfo (public issue 426). * Correct typo in New Objects list for <<VK_EXT_debug_report>> (public issue 447). Internal Issues: * Moved to asciidoctor for spec builds (internal issue 121). * Update style guide to describe where to put new extensions-specific asciidoc files, and what to name them (internal issue 626). * Add src/spec/indexExt.py to autogenerate registry index entries linking into the 1.0-extensions specification, instead of maintaining the index manually. (internal issue 642). * Autogenerate extension dependencies and lists of all extensions and all KHR extensions from the "supported" attributes in +vk.xml+. Execute +make config/extDependency.sh+ from +doc/specs/vulkan+ when a supported extension is added to vk.xml, to regenerate the dependency script. The consequence is that specifying a single extension to the +makeExt+ script will automatically enable all extensions it depends on as well, and that the +makeAllExts+ and +makeKHR+ scripts do not need to be updated when a new extension is supported (internal issue 648). * Put extension appendices all at the same asciidoc section level, so KHR WSI extensions show up in the HTML index (internal issue 648). Other Issues: * Imbed images in the generated HTML specs instead of loading them from the images/ directory. * Fix missing EXT in extension name (ename:VK_EXT_SWAPCHAIN_COLOR_SPACE_EXTENSION_NAME). * Add new +VK_EXT_SMPTE_2086_metadata+ extension. * In the <<platformCreateSurface_xlib,Xlib Surface>> section of the +VK_KHR_xlib_surface+ specification, add language warning users that they always need to call code:XinitThreads. * Use the term "presentable image" (rather than "swapchain image") consistently in +VK_KHR_swapchain+ and related extensions, and add a glossary term defining it. * Relocate the valid usage for samples of flink:vkGetPhysicalDeviceSparseImageFormatProperties2KHR::pname:pFormatInfo to be below the flink:VkPhysicalDeviceSparseImageFormatInfo2KHR structure.
2017-02-11 04:37:39 +00:00
\end{aligned}
Change log for January 23, 2017 Vulkan 1.0.39 spec update: * Bump API patch number and header version number to 39 for this update. Github Issues: * Clarified that only accesses via the specified buffer/image subresource ranges are included in the access scopes (public issue 306). * Add missing valid usage statements for flink:vkCreateComputePipelines and flink:vkCreateGraphicsPipelines (public issue 427). Internal Issues: * Add a Note to the <<invariance,Invariance>> appendix about a difference between OpenGL and Vulkan with regards to how primitives derived from offsets are handled (internal issue 355). * Add the +<<VK_KHR_get_physical_device_properties2>>+, +<<VK_KHR_maintenance1>>+, and +<<VK_KHR_shader_draw_parameters>>+ extensions (internal issue 448). * Add the +<<VK_EXT_shader_subgroup_vote>>+ and +<<VK_EXT_shader_subgroup_ballot>>+ extensions (internal issue 449). * Update the texture level-of-detail equation in the <<textures-scale-factor,Scale Factor Operation>> section to better approximate the ellipse major and minor axes (internal issue 547). * Forbid non-explicitly allowed uses of interface decorations in the introduction to the <<interfaces,Shader Interfaces>> chapter (internal issue 607). * Replace use of MathJax with KaTeX, for improved load-time performance as well as avoiding the scrolling-and-scrolling behavior due to MathJax asynchronous rendering when loading at an anchor inside the spec. This change also requires moving to HTML5 output for the spec instead of XHTML, and there is a visible difference in that the chapter navigation index is now in a scrollable sidebar instead of at the top of the document. We may or may not retain the nav sidebar based on feedback (internal issue 613). * Improve consistency of markup and formatting in extension appendices (internal issue 631). Other Issues: * Add explicit valid usage statements to slink:VkImageCopy requiring that the source and destination layer ranges be contained in their respective source and destination images. * Add valid usage language for swapchain of flink:vkAcquireNextImage. If the swapchain has been replaced, then it should not be passed to flink:vkAcquireNextImage. * Add a valid usage statement to flink:vkCreateImageView, that the image must have been created with an appropriate usage bit set. * Noted that slink:VkDisplayPresentInfoKHR is a valid extension of slink:VkPresentInfoKHR in the <<wsi_swapchain,WSI Swapchain>> section. * Update valid usage for flink:vkCmdSetViewport and flink:vkCmdSetScissor to account for the multiple viewport feature. If the feature is not enabled, the parameters for these functions have required values that are defined in the <<features-features-multiViewport,multiple viewports>> section of the spec but were not reflected in the valid usage text for these functions. * Add the +<<VK_EXT_swapchain_colorspace>>+ extension defining common color spaces.
2017-01-18 04:11:25 +00:00
++++++++++++++++++++++++
=== latexmath block 56
[latexmath]
++++++++++++++++++++++++
Change log for February 10, 2017 Vulkan 1.0.40 spec update: * Bump API patch number and header version number to 40 for this update. * There is a major build change in this release. We are now using the Ruby-based ``asciidoctor'' implementation, rather than the Python-based ``asciidoc'' implementation, to process the specification. While the actual specification markup changes were minimal, this requires a new set of build tools and a very different installation process, especially because we now use an experimental direct-to-PDF backend for Asciidoctor instead of Docbook->dblatex->PDF. It is no longer possible to build the Specification using asciidoc. See doc/specs/vulkan/README.adoc for some guidance on installing the new toolchain components. * There are some minor rendering issues in the PDF output due to teething problems with the asciidoctor toolchain, especially with mathematical equations. We are aware of these and working on them. Github Issues: * Updated sample code for the <<sparsememory-examples-basic,sparse resource binding example>> (public issue 97). * Modify line and point clipping behavior in the <<vertexpostproc-clipping, Primitive Clipping>> section to allow for pop-free behavior. The ability to check for which behavior is implemented may be added a future feature or extension (public issue 113). * Unify the discussions of implicit ordering throughout the spec, in particular in the new sections <<drawing-primitive-order, Primitive Order>>, <<primrast-order, Rasterization Order>>, and <<synchronization-implicit, Implicit Synchronization Guarantees>>; the discussion of <<synchronization-submission-order, submission order>>; and references elsewhere to these sections (public issue 133). * Clarify \<\<descriptorsets-compatibility,Pipeline Layout Compatibility>> language and introduce the term ``identically defined'' (public issue 164). * Add a dependency to the +VK_EXT_debug_marker+ extension that's needed to reuse the object type enum from +VK_EXT_debug_report+, and moves the definition of that enum into +VK_EXT_debug_report+ where it should be (public issue 409). * Remove redundant valid usage statement from slink:VkImageBlit (public issue 421). * Update GL_KHR_vulkan_glsl to allow the ternary operator to result in a specialization constant (public issue 424). * Fix valid usage for flink:VkPipelineShaderStageCreateInfo (public issue 426). * Correct typo in New Objects list for <<VK_EXT_debug_report>> (public issue 447). Internal Issues: * Moved to asciidoctor for spec builds (internal issue 121). * Update style guide to describe where to put new extensions-specific asciidoc files, and what to name them (internal issue 626). * Add src/spec/indexExt.py to autogenerate registry index entries linking into the 1.0-extensions specification, instead of maintaining the index manually. (internal issue 642). * Autogenerate extension dependencies and lists of all extensions and all KHR extensions from the "supported" attributes in +vk.xml+. Execute +make config/extDependency.sh+ from +doc/specs/vulkan+ when a supported extension is added to vk.xml, to regenerate the dependency script. The consequence is that specifying a single extension to the +makeExt+ script will automatically enable all extensions it depends on as well, and that the +makeAllExts+ and +makeKHR+ scripts do not need to be updated when a new extension is supported (internal issue 648). * Put extension appendices all at the same asciidoc section level, so KHR WSI extensions show up in the HTML index (internal issue 648). Other Issues: * Imbed images in the generated HTML specs instead of loading them from the images/ directory. * Fix missing EXT in extension name (ename:VK_EXT_SWAPCHAIN_COLOR_SPACE_EXTENSION_NAME). * Add new +VK_EXT_SMPTE_2086_metadata+ extension. * In the <<platformCreateSurface_xlib,Xlib Surface>> section of the +VK_KHR_xlib_surface+ specification, add language warning users that they always need to call code:XinitThreads. * Use the term "presentable image" (rather than "swapchain image") consistently in +VK_KHR_swapchain+ and related extensions, and add a glossary term defining it. * Relocate the valid usage for samples of flink:vkGetPhysicalDeviceSparseImageFormatProperties2KHR::pname:pFormatInfo to be below the flink:VkPhysicalDeviceSparseImageFormatInfo2KHR structure.
2017-02-11 04:37:39 +00:00
\begin{aligned}
Change log for January 23, 2017 Vulkan 1.0.39 spec update: * Bump API patch number and header version number to 39 for this update. Github Issues: * Clarified that only accesses via the specified buffer/image subresource ranges are included in the access scopes (public issue 306). * Add missing valid usage statements for flink:vkCreateComputePipelines and flink:vkCreateGraphicsPipelines (public issue 427). Internal Issues: * Add a Note to the <<invariance,Invariance>> appendix about a difference between OpenGL and Vulkan with regards to how primitives derived from offsets are handled (internal issue 355). * Add the +<<VK_KHR_get_physical_device_properties2>>+, +<<VK_KHR_maintenance1>>+, and +<<VK_KHR_shader_draw_parameters>>+ extensions (internal issue 448). * Add the +<<VK_EXT_shader_subgroup_vote>>+ and +<<VK_EXT_shader_subgroup_ballot>>+ extensions (internal issue 449). * Update the texture level-of-detail equation in the <<textures-scale-factor,Scale Factor Operation>> section to better approximate the ellipse major and minor axes (internal issue 547). * Forbid non-explicitly allowed uses of interface decorations in the introduction to the <<interfaces,Shader Interfaces>> chapter (internal issue 607). * Replace use of MathJax with KaTeX, for improved load-time performance as well as avoiding the scrolling-and-scrolling behavior due to MathJax asynchronous rendering when loading at an anchor inside the spec. This change also requires moving to HTML5 output for the spec instead of XHTML, and there is a visible difference in that the chapter navigation index is now in a scrollable sidebar instead of at the top of the document. We may or may not retain the nav sidebar based on feedback (internal issue 613). * Improve consistency of markup and formatting in extension appendices (internal issue 631). Other Issues: * Add explicit valid usage statements to slink:VkImageCopy requiring that the source and destination layer ranges be contained in their respective source and destination images. * Add valid usage language for swapchain of flink:vkAcquireNextImage. If the swapchain has been replaced, then it should not be passed to flink:vkAcquireNextImage. * Add a valid usage statement to flink:vkCreateImageView, that the image must have been created with an appropriate usage bit set. * Noted that slink:VkDisplayPresentInfoKHR is a valid extension of slink:VkPresentInfoKHR in the <<wsi_swapchain,WSI Swapchain>> section. * Update valid usage for flink:vkCmdSetViewport and flink:vkCmdSetScissor to account for the multiple viewport feature. If the feature is not enabled, the parameters for these functions have required values that are defined in the <<features-features-multiViewport,multiple viewports>> section of the spec but were not reflected in the valid usage text for these functions. * Add the +<<VK_EXT_swapchain_colorspace>>+ extension defining common color spaces.
2017-01-18 04:11:25 +00:00
\tau_{2Daniso} & =
\frac{1}{N}\sum_{i=1}^{N}
{\tau_{2D}\left (
u \left ( x - \frac{1}{2} + \frac{i}{N+1} , y \right ),
\left ( v \left (x-\frac{1}{2}+\frac{i}{N+1} \right ), y
\right )
\right )},
Change log for February 10, 2017 Vulkan 1.0.40 spec update: * Bump API patch number and header version number to 40 for this update. * There is a major build change in this release. We are now using the Ruby-based ``asciidoctor'' implementation, rather than the Python-based ``asciidoc'' implementation, to process the specification. While the actual specification markup changes were minimal, this requires a new set of build tools and a very different installation process, especially because we now use an experimental direct-to-PDF backend for Asciidoctor instead of Docbook->dblatex->PDF. It is no longer possible to build the Specification using asciidoc. See doc/specs/vulkan/README.adoc for some guidance on installing the new toolchain components. * There are some minor rendering issues in the PDF output due to teething problems with the asciidoctor toolchain, especially with mathematical equations. We are aware of these and working on them. Github Issues: * Updated sample code for the <<sparsememory-examples-basic,sparse resource binding example>> (public issue 97). * Modify line and point clipping behavior in the <<vertexpostproc-clipping, Primitive Clipping>> section to allow for pop-free behavior. The ability to check for which behavior is implemented may be added a future feature or extension (public issue 113). * Unify the discussions of implicit ordering throughout the spec, in particular in the new sections <<drawing-primitive-order, Primitive Order>>, <<primrast-order, Rasterization Order>>, and <<synchronization-implicit, Implicit Synchronization Guarantees>>; the discussion of <<synchronization-submission-order, submission order>>; and references elsewhere to these sections (public issue 133). * Clarify \<\<descriptorsets-compatibility,Pipeline Layout Compatibility>> language and introduce the term ``identically defined'' (public issue 164). * Add a dependency to the +VK_EXT_debug_marker+ extension that's needed to reuse the object type enum from +VK_EXT_debug_report+, and moves the definition of that enum into +VK_EXT_debug_report+ where it should be (public issue 409). * Remove redundant valid usage statement from slink:VkImageBlit (public issue 421). * Update GL_KHR_vulkan_glsl to allow the ternary operator to result in a specialization constant (public issue 424). * Fix valid usage for flink:VkPipelineShaderStageCreateInfo (public issue 426). * Correct typo in New Objects list for <<VK_EXT_debug_report>> (public issue 447). Internal Issues: * Moved to asciidoctor for spec builds (internal issue 121). * Update style guide to describe where to put new extensions-specific asciidoc files, and what to name them (internal issue 626). * Add src/spec/indexExt.py to autogenerate registry index entries linking into the 1.0-extensions specification, instead of maintaining the index manually. (internal issue 642). * Autogenerate extension dependencies and lists of all extensions and all KHR extensions from the "supported" attributes in +vk.xml+. Execute +make config/extDependency.sh+ from +doc/specs/vulkan+ when a supported extension is added to vk.xml, to regenerate the dependency script. The consequence is that specifying a single extension to the +makeExt+ script will automatically enable all extensions it depends on as well, and that the +makeAllExts+ and +makeKHR+ scripts do not need to be updated when a new extension is supported (internal issue 648). * Put extension appendices all at the same asciidoc section level, so KHR WSI extensions show up in the HTML index (internal issue 648). Other Issues: * Imbed images in the generated HTML specs instead of loading them from the images/ directory. * Fix missing EXT in extension name (ename:VK_EXT_SWAPCHAIN_COLOR_SPACE_EXTENSION_NAME). * Add new +VK_EXT_SMPTE_2086_metadata+ extension. * In the <<platformCreateSurface_xlib,Xlib Surface>> section of the +VK_KHR_xlib_surface+ specification, add language warning users that they always need to call code:XinitThreads. * Use the term "presentable image" (rather than "swapchain image") consistently in +VK_KHR_swapchain+ and related extensions, and add a glossary term defining it. * Relocate the valid usage for samples of flink:vkGetPhysicalDeviceSparseImageFormatProperties2KHR::pname:pFormatInfo to be below the flink:VkPhysicalDeviceSparseImageFormatInfo2KHR structure.
2017-02-11 04:37:39 +00:00
& \text{when}\ \rho_{x} > \rho_{y} \\
Change log for January 23, 2017 Vulkan 1.0.39 spec update: * Bump API patch number and header version number to 39 for this update. Github Issues: * Clarified that only accesses via the specified buffer/image subresource ranges are included in the access scopes (public issue 306). * Add missing valid usage statements for flink:vkCreateComputePipelines and flink:vkCreateGraphicsPipelines (public issue 427). Internal Issues: * Add a Note to the <<invariance,Invariance>> appendix about a difference between OpenGL and Vulkan with regards to how primitives derived from offsets are handled (internal issue 355). * Add the +<<VK_KHR_get_physical_device_properties2>>+, +<<VK_KHR_maintenance1>>+, and +<<VK_KHR_shader_draw_parameters>>+ extensions (internal issue 448). * Add the +<<VK_EXT_shader_subgroup_vote>>+ and +<<VK_EXT_shader_subgroup_ballot>>+ extensions (internal issue 449). * Update the texture level-of-detail equation in the <<textures-scale-factor,Scale Factor Operation>> section to better approximate the ellipse major and minor axes (internal issue 547). * Forbid non-explicitly allowed uses of interface decorations in the introduction to the <<interfaces,Shader Interfaces>> chapter (internal issue 607). * Replace use of MathJax with KaTeX, for improved load-time performance as well as avoiding the scrolling-and-scrolling behavior due to MathJax asynchronous rendering when loading at an anchor inside the spec. This change also requires moving to HTML5 output for the spec instead of XHTML, and there is a visible difference in that the chapter navigation index is now in a scrollable sidebar instead of at the top of the document. We may or may not retain the nav sidebar based on feedback (internal issue 613). * Improve consistency of markup and formatting in extension appendices (internal issue 631). Other Issues: * Add explicit valid usage statements to slink:VkImageCopy requiring that the source and destination layer ranges be contained in their respective source and destination images. * Add valid usage language for swapchain of flink:vkAcquireNextImage. If the swapchain has been replaced, then it should not be passed to flink:vkAcquireNextImage. * Add a valid usage statement to flink:vkCreateImageView, that the image must have been created with an appropriate usage bit set. * Noted that slink:VkDisplayPresentInfoKHR is a valid extension of slink:VkPresentInfoKHR in the <<wsi_swapchain,WSI Swapchain>> section. * Update valid usage for flink:vkCmdSetViewport and flink:vkCmdSetScissor to account for the multiple viewport feature. If the feature is not enabled, the parameters for these functions have required values that are defined in the <<features-features-multiViewport,multiple viewports>> section of the spec but were not reflected in the valid usage text for these functions. * Add the +<<VK_EXT_swapchain_colorspace>>+ extension defining common color spaces.
2017-01-18 04:11:25 +00:00
\tau_{2Daniso} &=
\frac{1}{N}\sum_{i=1}^{N}
{\tau_{2D}\left (
u \left ( x, y - \frac{1}{2} + \frac{i}{N+1} \right ),
\left ( v \left (x,y-\frac{1}{2}+\frac{i}{N+1} \right )
\right )
\right )},
Change log for February 10, 2017 Vulkan 1.0.40 spec update: * Bump API patch number and header version number to 40 for this update. * There is a major build change in this release. We are now using the Ruby-based ``asciidoctor'' implementation, rather than the Python-based ``asciidoc'' implementation, to process the specification. While the actual specification markup changes were minimal, this requires a new set of build tools and a very different installation process, especially because we now use an experimental direct-to-PDF backend for Asciidoctor instead of Docbook->dblatex->PDF. It is no longer possible to build the Specification using asciidoc. See doc/specs/vulkan/README.adoc for some guidance on installing the new toolchain components. * There are some minor rendering issues in the PDF output due to teething problems with the asciidoctor toolchain, especially with mathematical equations. We are aware of these and working on them. Github Issues: * Updated sample code for the <<sparsememory-examples-basic,sparse resource binding example>> (public issue 97). * Modify line and point clipping behavior in the <<vertexpostproc-clipping, Primitive Clipping>> section to allow for pop-free behavior. The ability to check for which behavior is implemented may be added a future feature or extension (public issue 113). * Unify the discussions of implicit ordering throughout the spec, in particular in the new sections <<drawing-primitive-order, Primitive Order>>, <<primrast-order, Rasterization Order>>, and <<synchronization-implicit, Implicit Synchronization Guarantees>>; the discussion of <<synchronization-submission-order, submission order>>; and references elsewhere to these sections (public issue 133). * Clarify \<\<descriptorsets-compatibility,Pipeline Layout Compatibility>> language and introduce the term ``identically defined'' (public issue 164). * Add a dependency to the +VK_EXT_debug_marker+ extension that's needed to reuse the object type enum from +VK_EXT_debug_report+, and moves the definition of that enum into +VK_EXT_debug_report+ where it should be (public issue 409). * Remove redundant valid usage statement from slink:VkImageBlit (public issue 421). * Update GL_KHR_vulkan_glsl to allow the ternary operator to result in a specialization constant (public issue 424). * Fix valid usage for flink:VkPipelineShaderStageCreateInfo (public issue 426). * Correct typo in New Objects list for <<VK_EXT_debug_report>> (public issue 447). Internal Issues: * Moved to asciidoctor for spec builds (internal issue 121). * Update style guide to describe where to put new extensions-specific asciidoc files, and what to name them (internal issue 626). * Add src/spec/indexExt.py to autogenerate registry index entries linking into the 1.0-extensions specification, instead of maintaining the index manually. (internal issue 642). * Autogenerate extension dependencies and lists of all extensions and all KHR extensions from the "supported" attributes in +vk.xml+. Execute +make config/extDependency.sh+ from +doc/specs/vulkan+ when a supported extension is added to vk.xml, to regenerate the dependency script. The consequence is that specifying a single extension to the +makeExt+ script will automatically enable all extensions it depends on as well, and that the +makeAllExts+ and +makeKHR+ scripts do not need to be updated when a new extension is supported (internal issue 648). * Put extension appendices all at the same asciidoc section level, so KHR WSI extensions show up in the HTML index (internal issue 648). Other Issues: * Imbed images in the generated HTML specs instead of loading them from the images/ directory. * Fix missing EXT in extension name (ename:VK_EXT_SWAPCHAIN_COLOR_SPACE_EXTENSION_NAME). * Add new +VK_EXT_SMPTE_2086_metadata+ extension. * In the <<platformCreateSurface_xlib,Xlib Surface>> section of the +VK_KHR_xlib_surface+ specification, add language warning users that they always need to call code:XinitThreads. * Use the term "presentable image" (rather than "swapchain image") consistently in +VK_KHR_swapchain+ and related extensions, and add a glossary term defining it. * Relocate the valid usage for samples of flink:vkGetPhysicalDeviceSparseImageFormatProperties2KHR::pname:pFormatInfo to be below the flink:VkPhysicalDeviceSparseImageFormatInfo2KHR structure.
2017-02-11 04:37:39 +00:00
& \text{when}\ \rho_{y} \geq \rho_{x}
\end{aligned}
Change log for January 23, 2017 Vulkan 1.0.39 spec update: * Bump API patch number and header version number to 39 for this update. Github Issues: * Clarified that only accesses via the specified buffer/image subresource ranges are included in the access scopes (public issue 306). * Add missing valid usage statements for flink:vkCreateComputePipelines and flink:vkCreateGraphicsPipelines (public issue 427). Internal Issues: * Add a Note to the <<invariance,Invariance>> appendix about a difference between OpenGL and Vulkan with regards to how primitives derived from offsets are handled (internal issue 355). * Add the +<<VK_KHR_get_physical_device_properties2>>+, +<<VK_KHR_maintenance1>>+, and +<<VK_KHR_shader_draw_parameters>>+ extensions (internal issue 448). * Add the +<<VK_EXT_shader_subgroup_vote>>+ and +<<VK_EXT_shader_subgroup_ballot>>+ extensions (internal issue 449). * Update the texture level-of-detail equation in the <<textures-scale-factor,Scale Factor Operation>> section to better approximate the ellipse major and minor axes (internal issue 547). * Forbid non-explicitly allowed uses of interface decorations in the introduction to the <<interfaces,Shader Interfaces>> chapter (internal issue 607). * Replace use of MathJax with KaTeX, for improved load-time performance as well as avoiding the scrolling-and-scrolling behavior due to MathJax asynchronous rendering when loading at an anchor inside the spec. This change also requires moving to HTML5 output for the spec instead of XHTML, and there is a visible difference in that the chapter navigation index is now in a scrollable sidebar instead of at the top of the document. We may or may not retain the nav sidebar based on feedback (internal issue 613). * Improve consistency of markup and formatting in extension appendices (internal issue 631). Other Issues: * Add explicit valid usage statements to slink:VkImageCopy requiring that the source and destination layer ranges be contained in their respective source and destination images. * Add valid usage language for swapchain of flink:vkAcquireNextImage. If the swapchain has been replaced, then it should not be passed to flink:vkAcquireNextImage. * Add a valid usage statement to flink:vkCreateImageView, that the image must have been created with an appropriate usage bit set. * Noted that slink:VkDisplayPresentInfoKHR is a valid extension of slink:VkPresentInfoKHR in the <<wsi_swapchain,WSI Swapchain>> section. * Update valid usage for flink:vkCmdSetViewport and flink:vkCmdSetScissor to account for the multiple viewport feature. If the feature is not enabled, the parameters for these functions have required values that are defined in the <<features-features-multiViewport,multiple viewports>> section of the spec but were not reflected in the valid usage text for these functions. * Add the +<<VK_EXT_swapchain_colorspace>>+ extension defining common color spaces.
2017-01-18 04:11:25 +00:00
++++++++++++++++++++++++
== File chapters/vertexpostproc.txt
Change log for February 10, 2017 Vulkan 1.0.40 spec update: * Bump API patch number and header version number to 40 for this update. * There is a major build change in this release. We are now using the Ruby-based ``asciidoctor'' implementation, rather than the Python-based ``asciidoc'' implementation, to process the specification. While the actual specification markup changes were minimal, this requires a new set of build tools and a very different installation process, especially because we now use an experimental direct-to-PDF backend for Asciidoctor instead of Docbook->dblatex->PDF. It is no longer possible to build the Specification using asciidoc. See doc/specs/vulkan/README.adoc for some guidance on installing the new toolchain components. * There are some minor rendering issues in the PDF output due to teething problems with the asciidoctor toolchain, especially with mathematical equations. We are aware of these and working on them. Github Issues: * Updated sample code for the <<sparsememory-examples-basic,sparse resource binding example>> (public issue 97). * Modify line and point clipping behavior in the <<vertexpostproc-clipping, Primitive Clipping>> section to allow for pop-free behavior. The ability to check for which behavior is implemented may be added a future feature or extension (public issue 113). * Unify the discussions of implicit ordering throughout the spec, in particular in the new sections <<drawing-primitive-order, Primitive Order>>, <<primrast-order, Rasterization Order>>, and <<synchronization-implicit, Implicit Synchronization Guarantees>>; the discussion of <<synchronization-submission-order, submission order>>; and references elsewhere to these sections (public issue 133). * Clarify \<\<descriptorsets-compatibility,Pipeline Layout Compatibility>> language and introduce the term ``identically defined'' (public issue 164). * Add a dependency to the +VK_EXT_debug_marker+ extension that's needed to reuse the object type enum from +VK_EXT_debug_report+, and moves the definition of that enum into +VK_EXT_debug_report+ where it should be (public issue 409). * Remove redundant valid usage statement from slink:VkImageBlit (public issue 421). * Update GL_KHR_vulkan_glsl to allow the ternary operator to result in a specialization constant (public issue 424). * Fix valid usage for flink:VkPipelineShaderStageCreateInfo (public issue 426). * Correct typo in New Objects list for <<VK_EXT_debug_report>> (public issue 447). Internal Issues: * Moved to asciidoctor for spec builds (internal issue 121). * Update style guide to describe where to put new extensions-specific asciidoc files, and what to name them (internal issue 626). * Add src/spec/indexExt.py to autogenerate registry index entries linking into the 1.0-extensions specification, instead of maintaining the index manually. (internal issue 642). * Autogenerate extension dependencies and lists of all extensions and all KHR extensions from the "supported" attributes in +vk.xml+. Execute +make config/extDependency.sh+ from +doc/specs/vulkan+ when a supported extension is added to vk.xml, to regenerate the dependency script. The consequence is that specifying a single extension to the +makeExt+ script will automatically enable all extensions it depends on as well, and that the +makeAllExts+ and +makeKHR+ scripts do not need to be updated when a new extension is supported (internal issue 648). * Put extension appendices all at the same asciidoc section level, so KHR WSI extensions show up in the HTML index (internal issue 648). Other Issues: * Imbed images in the generated HTML specs instead of loading them from the images/ directory. * Fix missing EXT in extension name (ename:VK_EXT_SWAPCHAIN_COLOR_SPACE_EXTENSION_NAME). * Add new +VK_EXT_SMPTE_2086_metadata+ extension. * In the <<platformCreateSurface_xlib,Xlib Surface>> section of the +VK_KHR_xlib_surface+ specification, add language warning users that they always need to call code:XinitThreads. * Use the term "presentable image" (rather than "swapchain image") consistently in +VK_KHR_swapchain+ and related extensions, and add a glossary term defining it. * Relocate the valid usage for samples of flink:vkGetPhysicalDeviceSparseImageFormatProperties2KHR::pname:pFormatInfo to be below the flink:VkPhysicalDeviceSparseImageFormatInfo2KHR structure.
2017-02-11 04:37:39 +00:00
=== latexmath block 57
Change log for January 23, 2017 Vulkan 1.0.39 spec update: * Bump API patch number and header version number to 39 for this update. Github Issues: * Clarified that only accesses via the specified buffer/image subresource ranges are included in the access scopes (public issue 306). * Add missing valid usage statements for flink:vkCreateComputePipelines and flink:vkCreateGraphicsPipelines (public issue 427). Internal Issues: * Add a Note to the <<invariance,Invariance>> appendix about a difference between OpenGL and Vulkan with regards to how primitives derived from offsets are handled (internal issue 355). * Add the +<<VK_KHR_get_physical_device_properties2>>+, +<<VK_KHR_maintenance1>>+, and +<<VK_KHR_shader_draw_parameters>>+ extensions (internal issue 448). * Add the +<<VK_EXT_shader_subgroup_vote>>+ and +<<VK_EXT_shader_subgroup_ballot>>+ extensions (internal issue 449). * Update the texture level-of-detail equation in the <<textures-scale-factor,Scale Factor Operation>> section to better approximate the ellipse major and minor axes (internal issue 547). * Forbid non-explicitly allowed uses of interface decorations in the introduction to the <<interfaces,Shader Interfaces>> chapter (internal issue 607). * Replace use of MathJax with KaTeX, for improved load-time performance as well as avoiding the scrolling-and-scrolling behavior due to MathJax asynchronous rendering when loading at an anchor inside the spec. This change also requires moving to HTML5 output for the spec instead of XHTML, and there is a visible difference in that the chapter navigation index is now in a scrollable sidebar instead of at the top of the document. We may or may not retain the nav sidebar based on feedback (internal issue 613). * Improve consistency of markup and formatting in extension appendices (internal issue 631). Other Issues: * Add explicit valid usage statements to slink:VkImageCopy requiring that the source and destination layer ranges be contained in their respective source and destination images. * Add valid usage language for swapchain of flink:vkAcquireNextImage. If the swapchain has been replaced, then it should not be passed to flink:vkAcquireNextImage. * Add a valid usage statement to flink:vkCreateImageView, that the image must have been created with an appropriate usage bit set. * Noted that slink:VkDisplayPresentInfoKHR is a valid extension of slink:VkPresentInfoKHR in the <<wsi_swapchain,WSI Swapchain>> section. * Update valid usage for flink:vkCmdSetViewport and flink:vkCmdSetScissor to account for the multiple viewport feature. If the feature is not enabled, the parameters for these functions have required values that are defined in the <<features-features-multiViewport,multiple viewports>> section of the spec but were not reflected in the valid usage text for these functions. * Add the +<<VK_EXT_swapchain_colorspace>>+ extension defining common color spaces.
2017-01-18 04:11:25 +00:00
Change log for February 10, 2017 Vulkan 1.0.40 spec update: * Bump API patch number and header version number to 40 for this update. * There is a major build change in this release. We are now using the Ruby-based ``asciidoctor'' implementation, rather than the Python-based ``asciidoc'' implementation, to process the specification. While the actual specification markup changes were minimal, this requires a new set of build tools and a very different installation process, especially because we now use an experimental direct-to-PDF backend for Asciidoctor instead of Docbook->dblatex->PDF. It is no longer possible to build the Specification using asciidoc. See doc/specs/vulkan/README.adoc for some guidance on installing the new toolchain components. * There are some minor rendering issues in the PDF output due to teething problems with the asciidoctor toolchain, especially with mathematical equations. We are aware of these and working on them. Github Issues: * Updated sample code for the <<sparsememory-examples-basic,sparse resource binding example>> (public issue 97). * Modify line and point clipping behavior in the <<vertexpostproc-clipping, Primitive Clipping>> section to allow for pop-free behavior. The ability to check for which behavior is implemented may be added a future feature or extension (public issue 113). * Unify the discussions of implicit ordering throughout the spec, in particular in the new sections <<drawing-primitive-order, Primitive Order>>, <<primrast-order, Rasterization Order>>, and <<synchronization-implicit, Implicit Synchronization Guarantees>>; the discussion of <<synchronization-submission-order, submission order>>; and references elsewhere to these sections (public issue 133). * Clarify \<\<descriptorsets-compatibility,Pipeline Layout Compatibility>> language and introduce the term ``identically defined'' (public issue 164). * Add a dependency to the +VK_EXT_debug_marker+ extension that's needed to reuse the object type enum from +VK_EXT_debug_report+, and moves the definition of that enum into +VK_EXT_debug_report+ where it should be (public issue 409). * Remove redundant valid usage statement from slink:VkImageBlit (public issue 421). * Update GL_KHR_vulkan_glsl to allow the ternary operator to result in a specialization constant (public issue 424). * Fix valid usage for flink:VkPipelineShaderStageCreateInfo (public issue 426). * Correct typo in New Objects list for <<VK_EXT_debug_report>> (public issue 447). Internal Issues: * Moved to asciidoctor for spec builds (internal issue 121). * Update style guide to describe where to put new extensions-specific asciidoc files, and what to name them (internal issue 626). * Add src/spec/indexExt.py to autogenerate registry index entries linking into the 1.0-extensions specification, instead of maintaining the index manually. (internal issue 642). * Autogenerate extension dependencies and lists of all extensions and all KHR extensions from the "supported" attributes in +vk.xml+. Execute +make config/extDependency.sh+ from +doc/specs/vulkan+ when a supported extension is added to vk.xml, to regenerate the dependency script. The consequence is that specifying a single extension to the +makeExt+ script will automatically enable all extensions it depends on as well, and that the +makeAllExts+ and +makeKHR+ scripts do not need to be updated when a new extension is supported (internal issue 648). * Put extension appendices all at the same asciidoc section level, so KHR WSI extensions show up in the HTML index (internal issue 648). Other Issues: * Imbed images in the generated HTML specs instead of loading them from the images/ directory. * Fix missing EXT in extension name (ename:VK_EXT_SWAPCHAIN_COLOR_SPACE_EXTENSION_NAME). * Add new +VK_EXT_SMPTE_2086_metadata+ extension. * In the <<platformCreateSurface_xlib,Xlib Surface>> section of the +VK_KHR_xlib_surface+ specification, add language warning users that they always need to call code:XinitThreads. * Use the term "presentable image" (rather than "swapchain image") consistently in +VK_KHR_swapchain+ and related extensions, and add a glossary term defining it. * Relocate the valid usage for samples of flink:vkGetPhysicalDeviceSparseImageFormatProperties2KHR::pname:pFormatInfo to be below the flink:VkPhysicalDeviceSparseImageFormatInfo2KHR structure.
2017-02-11 04:37:39 +00:00
[latexmath]
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
\begin{array}{c}
-w_c \leq x_c \leq w_c \\
-w_c \leq y_c \leq w_c \\
0 \leq z_c \leq w_c
\end{array}
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Change log for January 23, 2017 Vulkan 1.0.39 spec update: * Bump API patch number and header version number to 39 for this update. Github Issues: * Clarified that only accesses via the specified buffer/image subresource ranges are included in the access scopes (public issue 306). * Add missing valid usage statements for flink:vkCreateComputePipelines and flink:vkCreateGraphicsPipelines (public issue 427). Internal Issues: * Add a Note to the <<invariance,Invariance>> appendix about a difference between OpenGL and Vulkan with regards to how primitives derived from offsets are handled (internal issue 355). * Add the +<<VK_KHR_get_physical_device_properties2>>+, +<<VK_KHR_maintenance1>>+, and +<<VK_KHR_shader_draw_parameters>>+ extensions (internal issue 448). * Add the +<<VK_EXT_shader_subgroup_vote>>+ and +<<VK_EXT_shader_subgroup_ballot>>+ extensions (internal issue 449). * Update the texture level-of-detail equation in the <<textures-scale-factor,Scale Factor Operation>> section to better approximate the ellipse major and minor axes (internal issue 547). * Forbid non-explicitly allowed uses of interface decorations in the introduction to the <<interfaces,Shader Interfaces>> chapter (internal issue 607). * Replace use of MathJax with KaTeX, for improved load-time performance as well as avoiding the scrolling-and-scrolling behavior due to MathJax asynchronous rendering when loading at an anchor inside the spec. This change also requires moving to HTML5 output for the spec instead of XHTML, and there is a visible difference in that the chapter navigation index is now in a scrollable sidebar instead of at the top of the document. We may or may not retain the nav sidebar based on feedback (internal issue 613). * Improve consistency of markup and formatting in extension appendices (internal issue 631). Other Issues: * Add explicit valid usage statements to slink:VkImageCopy requiring that the source and destination layer ranges be contained in their respective source and destination images. * Add valid usage language for swapchain of flink:vkAcquireNextImage. If the swapchain has been replaced, then it should not be passed to flink:vkAcquireNextImage. * Add a valid usage statement to flink:vkCreateImageView, that the image must have been created with an appropriate usage bit set. * Noted that slink:VkDisplayPresentInfoKHR is a valid extension of slink:VkPresentInfoKHR in the <<wsi_swapchain,WSI Swapchain>> section. * Update valid usage for flink:vkCmdSetViewport and flink:vkCmdSetScissor to account for the multiple viewport feature. If the feature is not enabled, the parameters for these functions have required values that are defined in the <<features-features-multiViewport,multiple viewports>> section of the spec but were not reflected in the valid usage text for these functions. * Add the +<<VK_EXT_swapchain_colorspace>>+ extension defining common color spaces.
2017-01-18 04:11:25 +00:00
Change log for February 10, 2017 Vulkan 1.0.40 spec update: * Bump API patch number and header version number to 40 for this update. * There is a major build change in this release. We are now using the Ruby-based ``asciidoctor'' implementation, rather than the Python-based ``asciidoc'' implementation, to process the specification. While the actual specification markup changes were minimal, this requires a new set of build tools and a very different installation process, especially because we now use an experimental direct-to-PDF backend for Asciidoctor instead of Docbook->dblatex->PDF. It is no longer possible to build the Specification using asciidoc. See doc/specs/vulkan/README.adoc for some guidance on installing the new toolchain components. * There are some minor rendering issues in the PDF output due to teething problems with the asciidoctor toolchain, especially with mathematical equations. We are aware of these and working on them. Github Issues: * Updated sample code for the <<sparsememory-examples-basic,sparse resource binding example>> (public issue 97). * Modify line and point clipping behavior in the <<vertexpostproc-clipping, Primitive Clipping>> section to allow for pop-free behavior. The ability to check for which behavior is implemented may be added a future feature or extension (public issue 113). * Unify the discussions of implicit ordering throughout the spec, in particular in the new sections <<drawing-primitive-order, Primitive Order>>, <<primrast-order, Rasterization Order>>, and <<synchronization-implicit, Implicit Synchronization Guarantees>>; the discussion of <<synchronization-submission-order, submission order>>; and references elsewhere to these sections (public issue 133). * Clarify \<\<descriptorsets-compatibility,Pipeline Layout Compatibility>> language and introduce the term ``identically defined'' (public issue 164). * Add a dependency to the +VK_EXT_debug_marker+ extension that's needed to reuse the object type enum from +VK_EXT_debug_report+, and moves the definition of that enum into +VK_EXT_debug_report+ where it should be (public issue 409). * Remove redundant valid usage statement from slink:VkImageBlit (public issue 421). * Update GL_KHR_vulkan_glsl to allow the ternary operator to result in a specialization constant (public issue 424). * Fix valid usage for flink:VkPipelineShaderStageCreateInfo (public issue 426). * Correct typo in New Objects list for <<VK_EXT_debug_report>> (public issue 447). Internal Issues: * Moved to asciidoctor for spec builds (internal issue 121). * Update style guide to describe where to put new extensions-specific asciidoc files, and what to name them (internal issue 626). * Add src/spec/indexExt.py to autogenerate registry index entries linking into the 1.0-extensions specification, instead of maintaining the index manually. (internal issue 642). * Autogenerate extension dependencies and lists of all extensions and all KHR extensions from the "supported" attributes in +vk.xml+. Execute +make config/extDependency.sh+ from +doc/specs/vulkan+ when a supported extension is added to vk.xml, to regenerate the dependency script. The consequence is that specifying a single extension to the +makeExt+ script will automatically enable all extensions it depends on as well, and that the +makeAllExts+ and +makeKHR+ scripts do not need to be updated when a new extension is supported (internal issue 648). * Put extension appendices all at the same asciidoc section level, so KHR WSI extensions show up in the HTML index (internal issue 648). Other Issues: * Imbed images in the generated HTML specs instead of loading them from the images/ directory. * Fix missing EXT in extension name (ename:VK_EXT_SWAPCHAIN_COLOR_SPACE_EXTENSION_NAME). * Add new +VK_EXT_SMPTE_2086_metadata+ extension. * In the <<platformCreateSurface_xlib,Xlib Surface>> section of the +VK_KHR_xlib_surface+ specification, add language warning users that they always need to call code:XinitThreads. * Use the term "presentable image" (rather than "swapchain image") consistently in +VK_KHR_swapchain+ and related extensions, and add a glossary term defining it. * Relocate the valid usage for samples of flink:vkGetPhysicalDeviceSparseImageFormatProperties2KHR::pname:pFormatInfo to be below the flink:VkPhysicalDeviceSparseImageFormatInfo2KHR structure.
2017-02-11 04:37:39 +00:00
=== latexmath block 58
Change log for January 23, 2017 Vulkan 1.0.39 spec update: * Bump API patch number and header version number to 39 for this update. Github Issues: * Clarified that only accesses via the specified buffer/image subresource ranges are included in the access scopes (public issue 306). * Add missing valid usage statements for flink:vkCreateComputePipelines and flink:vkCreateGraphicsPipelines (public issue 427). Internal Issues: * Add a Note to the <<invariance,Invariance>> appendix about a difference between OpenGL and Vulkan with regards to how primitives derived from offsets are handled (internal issue 355). * Add the +<<VK_KHR_get_physical_device_properties2>>+, +<<VK_KHR_maintenance1>>+, and +<<VK_KHR_shader_draw_parameters>>+ extensions (internal issue 448). * Add the +<<VK_EXT_shader_subgroup_vote>>+ and +<<VK_EXT_shader_subgroup_ballot>>+ extensions (internal issue 449). * Update the texture level-of-detail equation in the <<textures-scale-factor,Scale Factor Operation>> section to better approximate the ellipse major and minor axes (internal issue 547). * Forbid non-explicitly allowed uses of interface decorations in the introduction to the <<interfaces,Shader Interfaces>> chapter (internal issue 607). * Replace use of MathJax with KaTeX, for improved load-time performance as well as avoiding the scrolling-and-scrolling behavior due to MathJax asynchronous rendering when loading at an anchor inside the spec. This change also requires moving to HTML5 output for the spec instead of XHTML, and there is a visible difference in that the chapter navigation index is now in a scrollable sidebar instead of at the top of the document. We may or may not retain the nav sidebar based on feedback (internal issue 613). * Improve consistency of markup and formatting in extension appendices (internal issue 631). Other Issues: * Add explicit valid usage statements to slink:VkImageCopy requiring that the source and destination layer ranges be contained in their respective source and destination images. * Add valid usage language for swapchain of flink:vkAcquireNextImage. If the swapchain has been replaced, then it should not be passed to flink:vkAcquireNextImage. * Add a valid usage statement to flink:vkCreateImageView, that the image must have been created with an appropriate usage bit set. * Noted that slink:VkDisplayPresentInfoKHR is a valid extension of slink:VkPresentInfoKHR in the <<wsi_swapchain,WSI Swapchain>> section. * Update valid usage for flink:vkCmdSetViewport and flink:vkCmdSetScissor to account for the multiple viewport feature. If the feature is not enabled, the parameters for these functions have required values that are defined in the <<features-features-multiViewport,multiple viewports>> section of the spec but were not reflected in the valid usage text for these functions. * Add the +<<VK_EXT_swapchain_colorspace>>+ extension defining common color spaces.
2017-01-18 04:11:25 +00:00
Change log for February 10, 2017 Vulkan 1.0.40 spec update: * Bump API patch number and header version number to 40 for this update. * There is a major build change in this release. We are now using the Ruby-based ``asciidoctor'' implementation, rather than the Python-based ``asciidoc'' implementation, to process the specification. While the actual specification markup changes were minimal, this requires a new set of build tools and a very different installation process, especially because we now use an experimental direct-to-PDF backend for Asciidoctor instead of Docbook->dblatex->PDF. It is no longer possible to build the Specification using asciidoc. See doc/specs/vulkan/README.adoc for some guidance on installing the new toolchain components. * There are some minor rendering issues in the PDF output due to teething problems with the asciidoctor toolchain, especially with mathematical equations. We are aware of these and working on them. Github Issues: * Updated sample code for the <<sparsememory-examples-basic,sparse resource binding example>> (public issue 97). * Modify line and point clipping behavior in the <<vertexpostproc-clipping, Primitive Clipping>> section to allow for pop-free behavior. The ability to check for which behavior is implemented may be added a future feature or extension (public issue 113). * Unify the discussions of implicit ordering throughout the spec, in particular in the new sections <<drawing-primitive-order, Primitive Order>>, <<primrast-order, Rasterization Order>>, and <<synchronization-implicit, Implicit Synchronization Guarantees>>; the discussion of <<synchronization-submission-order, submission order>>; and references elsewhere to these sections (public issue 133). * Clarify \<\<descriptorsets-compatibility,Pipeline Layout Compatibility>> language and introduce the term ``identically defined'' (public issue 164). * Add a dependency to the +VK_EXT_debug_marker+ extension that's needed to reuse the object type enum from +VK_EXT_debug_report+, and moves the definition of that enum into +VK_EXT_debug_report+ where it should be (public issue 409). * Remove redundant valid usage statement from slink:VkImageBlit (public issue 421). * Update GL_KHR_vulkan_glsl to allow the ternary operator to result in a specialization constant (public issue 424). * Fix valid usage for flink:VkPipelineShaderStageCreateInfo (public issue 426). * Correct typo in New Objects list for <<VK_EXT_debug_report>> (public issue 447). Internal Issues: * Moved to asciidoctor for spec builds (internal issue 121). * Update style guide to describe where to put new extensions-specific asciidoc files, and what to name them (internal issue 626). * Add src/spec/indexExt.py to autogenerate registry index entries linking into the 1.0-extensions specification, instead of maintaining the index manually. (internal issue 642). * Autogenerate extension dependencies and lists of all extensions and all KHR extensions from the "supported" attributes in +vk.xml+. Execute +make config/extDependency.sh+ from +doc/specs/vulkan+ when a supported extension is added to vk.xml, to regenerate the dependency script. The consequence is that specifying a single extension to the +makeExt+ script will automatically enable all extensions it depends on as well, and that the +makeAllExts+ and +makeKHR+ scripts do not need to be updated when a new extension is supported (internal issue 648). * Put extension appendices all at the same asciidoc section level, so KHR WSI extensions show up in the HTML index (internal issue 648). Other Issues: * Imbed images in the generated HTML specs instead of loading them from the images/ directory. * Fix missing EXT in extension name (ename:VK_EXT_SWAPCHAIN_COLOR_SPACE_EXTENSION_NAME). * Add new +VK_EXT_SMPTE_2086_metadata+ extension. * In the <<platformCreateSurface_xlib,Xlib Surface>> section of the +VK_KHR_xlib_surface+ specification, add language warning users that they always need to call code:XinitThreads. * Use the term "presentable image" (rather than "swapchain image") consistently in +VK_KHR_swapchain+ and related extensions, and add a glossary term defining it. * Relocate the valid usage for samples of flink:vkGetPhysicalDeviceSparseImageFormatProperties2KHR::pname:pFormatInfo to be below the flink:VkPhysicalDeviceSparseImageFormatInfo2KHR structure.
2017-02-11 04:37:39 +00:00
[latexmath]
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
\left(\begin{array}{c}
x_c \\
y_c \\
z_c \\
w_c
\end{array}\right)
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Change log for January 23, 2017 Vulkan 1.0.39 spec update: * Bump API patch number and header version number to 39 for this update. Github Issues: * Clarified that only accesses via the specified buffer/image subresource ranges are included in the access scopes (public issue 306). * Add missing valid usage statements for flink:vkCreateComputePipelines and flink:vkCreateGraphicsPipelines (public issue 427). Internal Issues: * Add a Note to the <<invariance,Invariance>> appendix about a difference between OpenGL and Vulkan with regards to how primitives derived from offsets are handled (internal issue 355). * Add the +<<VK_KHR_get_physical_device_properties2>>+, +<<VK_KHR_maintenance1>>+, and +<<VK_KHR_shader_draw_parameters>>+ extensions (internal issue 448). * Add the +<<VK_EXT_shader_subgroup_vote>>+ and +<<VK_EXT_shader_subgroup_ballot>>+ extensions (internal issue 449). * Update the texture level-of-detail equation in the <<textures-scale-factor,Scale Factor Operation>> section to better approximate the ellipse major and minor axes (internal issue 547). * Forbid non-explicitly allowed uses of interface decorations in the introduction to the <<interfaces,Shader Interfaces>> chapter (internal issue 607). * Replace use of MathJax with KaTeX, for improved load-time performance as well as avoiding the scrolling-and-scrolling behavior due to MathJax asynchronous rendering when loading at an anchor inside the spec. This change also requires moving to HTML5 output for the spec instead of XHTML, and there is a visible difference in that the chapter navigation index is now in a scrollable sidebar instead of at the top of the document. We may or may not retain the nav sidebar based on feedback (internal issue 613). * Improve consistency of markup and formatting in extension appendices (internal issue 631). Other Issues: * Add explicit valid usage statements to slink:VkImageCopy requiring that the source and destination layer ranges be contained in their respective source and destination images. * Add valid usage language for swapchain of flink:vkAcquireNextImage. If the swapchain has been replaced, then it should not be passed to flink:vkAcquireNextImage. * Add a valid usage statement to flink:vkCreateImageView, that the image must have been created with an appropriate usage bit set. * Noted that slink:VkDisplayPresentInfoKHR is a valid extension of slink:VkPresentInfoKHR in the <<wsi_swapchain,WSI Swapchain>> section. * Update valid usage for flink:vkCmdSetViewport and flink:vkCmdSetScissor to account for the multiple viewport feature. If the feature is not enabled, the parameters for these functions have required values that are defined in the <<features-features-multiViewport,multiple viewports>> section of the spec but were not reflected in the valid usage text for these functions. * Add the +<<VK_EXT_swapchain_colorspace>>+ extension defining common color spaces.
2017-01-18 04:11:25 +00:00
Change log for February 10, 2017 Vulkan 1.0.40 spec update: * Bump API patch number and header version number to 40 for this update. * There is a major build change in this release. We are now using the Ruby-based ``asciidoctor'' implementation, rather than the Python-based ``asciidoc'' implementation, to process the specification. While the actual specification markup changes were minimal, this requires a new set of build tools and a very different installation process, especially because we now use an experimental direct-to-PDF backend for Asciidoctor instead of Docbook->dblatex->PDF. It is no longer possible to build the Specification using asciidoc. See doc/specs/vulkan/README.adoc for some guidance on installing the new toolchain components. * There are some minor rendering issues in the PDF output due to teething problems with the asciidoctor toolchain, especially with mathematical equations. We are aware of these and working on them. Github Issues: * Updated sample code for the <<sparsememory-examples-basic,sparse resource binding example>> (public issue 97). * Modify line and point clipping behavior in the <<vertexpostproc-clipping, Primitive Clipping>> section to allow for pop-free behavior. The ability to check for which behavior is implemented may be added a future feature or extension (public issue 113). * Unify the discussions of implicit ordering throughout the spec, in particular in the new sections <<drawing-primitive-order, Primitive Order>>, <<primrast-order, Rasterization Order>>, and <<synchronization-implicit, Implicit Synchronization Guarantees>>; the discussion of <<synchronization-submission-order, submission order>>; and references elsewhere to these sections (public issue 133). * Clarify \<\<descriptorsets-compatibility,Pipeline Layout Compatibility>> language and introduce the term ``identically defined'' (public issue 164). * Add a dependency to the +VK_EXT_debug_marker+ extension that's needed to reuse the object type enum from +VK_EXT_debug_report+, and moves the definition of that enum into +VK_EXT_debug_report+ where it should be (public issue 409). * Remove redundant valid usage statement from slink:VkImageBlit (public issue 421). * Update GL_KHR_vulkan_glsl to allow the ternary operator to result in a specialization constant (public issue 424). * Fix valid usage for flink:VkPipelineShaderStageCreateInfo (public issue 426). * Correct typo in New Objects list for <<VK_EXT_debug_report>> (public issue 447). Internal Issues: * Moved to asciidoctor for spec builds (internal issue 121). * Update style guide to describe where to put new extensions-specific asciidoc files, and what to name them (internal issue 626). * Add src/spec/indexExt.py to autogenerate registry index entries linking into the 1.0-extensions specification, instead of maintaining the index manually. (internal issue 642). * Autogenerate extension dependencies and lists of all extensions and all KHR extensions from the "supported" attributes in +vk.xml+. Execute +make config/extDependency.sh+ from +doc/specs/vulkan+ when a supported extension is added to vk.xml, to regenerate the dependency script. The consequence is that specifying a single extension to the +makeExt+ script will automatically enable all extensions it depends on as well, and that the +makeAllExts+ and +makeKHR+ scripts do not need to be updated when a new extension is supported (internal issue 648). * Put extension appendices all at the same asciidoc section level, so KHR WSI extensions show up in the HTML index (internal issue 648). Other Issues: * Imbed images in the generated HTML specs instead of loading them from the images/ directory. * Fix missing EXT in extension name (ename:VK_EXT_SWAPCHAIN_COLOR_SPACE_EXTENSION_NAME). * Add new +VK_EXT_SMPTE_2086_metadata+ extension. * In the <<platformCreateSurface_xlib,Xlib Surface>> section of the +VK_KHR_xlib_surface+ specification, add language warning users that they always need to call code:XinitThreads. * Use the term "presentable image" (rather than "swapchain image") consistently in +VK_KHR_swapchain+ and related extensions, and add a glossary term defining it. * Relocate the valid usage for samples of flink:vkGetPhysicalDeviceSparseImageFormatProperties2KHR::pname:pFormatInfo to be below the flink:VkPhysicalDeviceSparseImageFormatInfo2KHR structure.
2017-02-11 04:37:39 +00:00
=== latexmath block 59
Change log for January 23, 2017 Vulkan 1.0.39 spec update: * Bump API patch number and header version number to 39 for this update. Github Issues: * Clarified that only accesses via the specified buffer/image subresource ranges are included in the access scopes (public issue 306). * Add missing valid usage statements for flink:vkCreateComputePipelines and flink:vkCreateGraphicsPipelines (public issue 427). Internal Issues: * Add a Note to the <<invariance,Invariance>> appendix about a difference between OpenGL and Vulkan with regards to how primitives derived from offsets are handled (internal issue 355). * Add the +<<VK_KHR_get_physical_device_properties2>>+, +<<VK_KHR_maintenance1>>+, and +<<VK_KHR_shader_draw_parameters>>+ extensions (internal issue 448). * Add the +<<VK_EXT_shader_subgroup_vote>>+ and +<<VK_EXT_shader_subgroup_ballot>>+ extensions (internal issue 449). * Update the texture level-of-detail equation in the <<textures-scale-factor,Scale Factor Operation>> section to better approximate the ellipse major and minor axes (internal issue 547). * Forbid non-explicitly allowed uses of interface decorations in the introduction to the <<interfaces,Shader Interfaces>> chapter (internal issue 607). * Replace use of MathJax with KaTeX, for improved load-time performance as well as avoiding the scrolling-and-scrolling behavior due to MathJax asynchronous rendering when loading at an anchor inside the spec. This change also requires moving to HTML5 output for the spec instead of XHTML, and there is a visible difference in that the chapter navigation index is now in a scrollable sidebar instead of at the top of the document. We may or may not retain the nav sidebar based on feedback (internal issue 613). * Improve consistency of markup and formatting in extension appendices (internal issue 631). Other Issues: * Add explicit valid usage statements to slink:VkImageCopy requiring that the source and destination layer ranges be contained in their respective source and destination images. * Add valid usage language for swapchain of flink:vkAcquireNextImage. If the swapchain has been replaced, then it should not be passed to flink:vkAcquireNextImage. * Add a valid usage statement to flink:vkCreateImageView, that the image must have been created with an appropriate usage bit set. * Noted that slink:VkDisplayPresentInfoKHR is a valid extension of slink:VkPresentInfoKHR in the <<wsi_swapchain,WSI Swapchain>> section. * Update valid usage for flink:vkCmdSetViewport and flink:vkCmdSetScissor to account for the multiple viewport feature. If the feature is not enabled, the parameters for these functions have required values that are defined in the <<features-features-multiViewport,multiple viewports>> section of the spec but were not reflected in the valid usage text for these functions. * Add the +<<VK_EXT_swapchain_colorspace>>+ extension defining common color spaces.
2017-01-18 04:11:25 +00:00
Change log for February 10, 2017 Vulkan 1.0.40 spec update: * Bump API patch number and header version number to 40 for this update. * There is a major build change in this release. We are now using the Ruby-based ``asciidoctor'' implementation, rather than the Python-based ``asciidoc'' implementation, to process the specification. While the actual specification markup changes were minimal, this requires a new set of build tools and a very different installation process, especially because we now use an experimental direct-to-PDF backend for Asciidoctor instead of Docbook->dblatex->PDF. It is no longer possible to build the Specification using asciidoc. See doc/specs/vulkan/README.adoc for some guidance on installing the new toolchain components. * There are some minor rendering issues in the PDF output due to teething problems with the asciidoctor toolchain, especially with mathematical equations. We are aware of these and working on them. Github Issues: * Updated sample code for the <<sparsememory-examples-basic,sparse resource binding example>> (public issue 97). * Modify line and point clipping behavior in the <<vertexpostproc-clipping, Primitive Clipping>> section to allow for pop-free behavior. The ability to check for which behavior is implemented may be added a future feature or extension (public issue 113). * Unify the discussions of implicit ordering throughout the spec, in particular in the new sections <<drawing-primitive-order, Primitive Order>>, <<primrast-order, Rasterization Order>>, and <<synchronization-implicit, Implicit Synchronization Guarantees>>; the discussion of <<synchronization-submission-order, submission order>>; and references elsewhere to these sections (public issue 133). * Clarify \<\<descriptorsets-compatibility,Pipeline Layout Compatibility>> language and introduce the term ``identically defined'' (public issue 164). * Add a dependency to the +VK_EXT_debug_marker+ extension that's needed to reuse the object type enum from +VK_EXT_debug_report+, and moves the definition of that enum into +VK_EXT_debug_report+ where it should be (public issue 409). * Remove redundant valid usage statement from slink:VkImageBlit (public issue 421). * Update GL_KHR_vulkan_glsl to allow the ternary operator to result in a specialization constant (public issue 424). * Fix valid usage for flink:VkPipelineShaderStageCreateInfo (public issue 426). * Correct typo in New Objects list for <<VK_EXT_debug_report>> (public issue 447). Internal Issues: * Moved to asciidoctor for spec builds (internal issue 121). * Update style guide to describe where to put new extensions-specific asciidoc files, and what to name them (internal issue 626). * Add src/spec/indexExt.py to autogenerate registry index entries linking into the 1.0-extensions specification, instead of maintaining the index manually. (internal issue 642). * Autogenerate extension dependencies and lists of all extensions and all KHR extensions from the "supported" attributes in +vk.xml+. Execute +make config/extDependency.sh+ from +doc/specs/vulkan+ when a supported extension is added to vk.xml, to regenerate the dependency script. The consequence is that specifying a single extension to the +makeExt+ script will automatically enable all extensions it depends on as well, and that the +makeAllExts+ and +makeKHR+ scripts do not need to be updated when a new extension is supported (internal issue 648). * Put extension appendices all at the same asciidoc section level, so KHR WSI extensions show up in the HTML index (internal issue 648). Other Issues: * Imbed images in the generated HTML specs instead of loading them from the images/ directory. * Fix missing EXT in extension name (ename:VK_EXT_SWAPCHAIN_COLOR_SPACE_EXTENSION_NAME). * Add new +VK_EXT_SMPTE_2086_metadata+ extension. * In the <<platformCreateSurface_xlib,Xlib Surface>> section of the +VK_KHR_xlib_surface+ specification, add language warning users that they always need to call code:XinitThreads. * Use the term "presentable image" (rather than "swapchain image") consistently in +VK_KHR_swapchain+ and related extensions, and add a glossary term defining it. * Relocate the valid usage for samples of flink:vkGetPhysicalDeviceSparseImageFormatProperties2KHR::pname:pFormatInfo to be below the flink:VkPhysicalDeviceSparseImageFormatInfo2KHR structure.
2017-02-11 04:37:39 +00:00
[latexmath]
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
\left(
\begin{array}{c}
x_d \\
y_d \\
z_d
\end{array}
\right) =
\left(
\begin{array}{c}
\frac{x_c}{w_c} \\
\frac{y_c}{w_c} \\
\frac{z_c}{w_c}
\end{array}
\right)
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Change log for January 23, 2017 Vulkan 1.0.39 spec update: * Bump API patch number and header version number to 39 for this update. Github Issues: * Clarified that only accesses via the specified buffer/image subresource ranges are included in the access scopes (public issue 306). * Add missing valid usage statements for flink:vkCreateComputePipelines and flink:vkCreateGraphicsPipelines (public issue 427). Internal Issues: * Add a Note to the <<invariance,Invariance>> appendix about a difference between OpenGL and Vulkan with regards to how primitives derived from offsets are handled (internal issue 355). * Add the +<<VK_KHR_get_physical_device_properties2>>+, +<<VK_KHR_maintenance1>>+, and +<<VK_KHR_shader_draw_parameters>>+ extensions (internal issue 448). * Add the +<<VK_EXT_shader_subgroup_vote>>+ and +<<VK_EXT_shader_subgroup_ballot>>+ extensions (internal issue 449). * Update the texture level-of-detail equation in the <<textures-scale-factor,Scale Factor Operation>> section to better approximate the ellipse major and minor axes (internal issue 547). * Forbid non-explicitly allowed uses of interface decorations in the introduction to the <<interfaces,Shader Interfaces>> chapter (internal issue 607). * Replace use of MathJax with KaTeX, for improved load-time performance as well as avoiding the scrolling-and-scrolling behavior due to MathJax asynchronous rendering when loading at an anchor inside the spec. This change also requires moving to HTML5 output for the spec instead of XHTML, and there is a visible difference in that the chapter navigation index is now in a scrollable sidebar instead of at the top of the document. We may or may not retain the nav sidebar based on feedback (internal issue 613). * Improve consistency of markup and formatting in extension appendices (internal issue 631). Other Issues: * Add explicit valid usage statements to slink:VkImageCopy requiring that the source and destination layer ranges be contained in their respective source and destination images. * Add valid usage language for swapchain of flink:vkAcquireNextImage. If the swapchain has been replaced, then it should not be passed to flink:vkAcquireNextImage. * Add a valid usage statement to flink:vkCreateImageView, that the image must have been created with an appropriate usage bit set. * Noted that slink:VkDisplayPresentInfoKHR is a valid extension of slink:VkPresentInfoKHR in the <<wsi_swapchain,WSI Swapchain>> section. * Update valid usage for flink:vkCmdSetViewport and flink:vkCmdSetScissor to account for the multiple viewport feature. If the feature is not enabled, the parameters for these functions have required values that are defined in the <<features-features-multiViewport,multiple viewports>> section of the spec but were not reflected in the valid usage text for these functions. * Add the +<<VK_EXT_swapchain_colorspace>>+ extension defining common color spaces.
2017-01-18 04:11:25 +00:00
=== latexmath inline 12
Change log for February 10, 2017 Vulkan 1.0.40 spec update: * Bump API patch number and header version number to 40 for this update. * There is a major build change in this release. We are now using the Ruby-based ``asciidoctor'' implementation, rather than the Python-based ``asciidoc'' implementation, to process the specification. While the actual specification markup changes were minimal, this requires a new set of build tools and a very different installation process, especially because we now use an experimental direct-to-PDF backend for Asciidoctor instead of Docbook->dblatex->PDF. It is no longer possible to build the Specification using asciidoc. See doc/specs/vulkan/README.adoc for some guidance on installing the new toolchain components. * There are some minor rendering issues in the PDF output due to teething problems with the asciidoctor toolchain, especially with mathematical equations. We are aware of these and working on them. Github Issues: * Updated sample code for the <<sparsememory-examples-basic,sparse resource binding example>> (public issue 97). * Modify line and point clipping behavior in the <<vertexpostproc-clipping, Primitive Clipping>> section to allow for pop-free behavior. The ability to check for which behavior is implemented may be added a future feature or extension (public issue 113). * Unify the discussions of implicit ordering throughout the spec, in particular in the new sections <<drawing-primitive-order, Primitive Order>>, <<primrast-order, Rasterization Order>>, and <<synchronization-implicit, Implicit Synchronization Guarantees>>; the discussion of <<synchronization-submission-order, submission order>>; and references elsewhere to these sections (public issue 133). * Clarify \<\<descriptorsets-compatibility,Pipeline Layout Compatibility>> language and introduce the term ``identically defined'' (public issue 164). * Add a dependency to the +VK_EXT_debug_marker+ extension that's needed to reuse the object type enum from +VK_EXT_debug_report+, and moves the definition of that enum into +VK_EXT_debug_report+ where it should be (public issue 409). * Remove redundant valid usage statement from slink:VkImageBlit (public issue 421). * Update GL_KHR_vulkan_glsl to allow the ternary operator to result in a specialization constant (public issue 424). * Fix valid usage for flink:VkPipelineShaderStageCreateInfo (public issue 426). * Correct typo in New Objects list for <<VK_EXT_debug_report>> (public issue 447). Internal Issues: * Moved to asciidoctor for spec builds (internal issue 121). * Update style guide to describe where to put new extensions-specific asciidoc files, and what to name them (internal issue 626). * Add src/spec/indexExt.py to autogenerate registry index entries linking into the 1.0-extensions specification, instead of maintaining the index manually. (internal issue 642). * Autogenerate extension dependencies and lists of all extensions and all KHR extensions from the "supported" attributes in +vk.xml+. Execute +make config/extDependency.sh+ from +doc/specs/vulkan+ when a supported extension is added to vk.xml, to regenerate the dependency script. The consequence is that specifying a single extension to the +makeExt+ script will automatically enable all extensions it depends on as well, and that the +makeAllExts+ and +makeKHR+ scripts do not need to be updated when a new extension is supported (internal issue 648). * Put extension appendices all at the same asciidoc section level, so KHR WSI extensions show up in the HTML index (internal issue 648). Other Issues: * Imbed images in the generated HTML specs instead of loading them from the images/ directory. * Fix missing EXT in extension name (ename:VK_EXT_SWAPCHAIN_COLOR_SPACE_EXTENSION_NAME). * Add new +VK_EXT_SMPTE_2086_metadata+ extension. * In the <<platformCreateSurface_xlib,Xlib Surface>> section of the +VK_KHR_xlib_surface+ specification, add language warning users that they always need to call code:XinitThreads. * Use the term "presentable image" (rather than "swapchain image") consistently in +VK_KHR_swapchain+ and related extensions, and add a glossary term defining it. * Relocate the valid usage for samples of flink:vkGetPhysicalDeviceSparseImageFormatProperties2KHR::pname:pFormatInfo to be below the flink:VkPhysicalDeviceSparseImageFormatInfo2KHR structure.
2017-02-11 04:37:39 +00:00
latexmath:[\frac{k}{2^m - 1}]
Change log for January 23, 2017 Vulkan 1.0.39 spec update: * Bump API patch number and header version number to 39 for this update. Github Issues: * Clarified that only accesses via the specified buffer/image subresource ranges are included in the access scopes (public issue 306). * Add missing valid usage statements for flink:vkCreateComputePipelines and flink:vkCreateGraphicsPipelines (public issue 427). Internal Issues: * Add a Note to the <<invariance,Invariance>> appendix about a difference between OpenGL and Vulkan with regards to how primitives derived from offsets are handled (internal issue 355). * Add the +<<VK_KHR_get_physical_device_properties2>>+, +<<VK_KHR_maintenance1>>+, and +<<VK_KHR_shader_draw_parameters>>+ extensions (internal issue 448). * Add the +<<VK_EXT_shader_subgroup_vote>>+ and +<<VK_EXT_shader_subgroup_ballot>>+ extensions (internal issue 449). * Update the texture level-of-detail equation in the <<textures-scale-factor,Scale Factor Operation>> section to better approximate the ellipse major and minor axes (internal issue 547). * Forbid non-explicitly allowed uses of interface decorations in the introduction to the <<interfaces,Shader Interfaces>> chapter (internal issue 607). * Replace use of MathJax with KaTeX, for improved load-time performance as well as avoiding the scrolling-and-scrolling behavior due to MathJax asynchronous rendering when loading at an anchor inside the spec. This change also requires moving to HTML5 output for the spec instead of XHTML, and there is a visible difference in that the chapter navigation index is now in a scrollable sidebar instead of at the top of the document. We may or may not retain the nav sidebar based on feedback (internal issue 613). * Improve consistency of markup and formatting in extension appendices (internal issue 631). Other Issues: * Add explicit valid usage statements to slink:VkImageCopy requiring that the source and destination layer ranges be contained in their respective source and destination images. * Add valid usage language for swapchain of flink:vkAcquireNextImage. If the swapchain has been replaced, then it should not be passed to flink:vkAcquireNextImage. * Add a valid usage statement to flink:vkCreateImageView, that the image must have been created with an appropriate usage bit set. * Noted that slink:VkDisplayPresentInfoKHR is a valid extension of slink:VkPresentInfoKHR in the <<wsi_swapchain,WSI Swapchain>> section. * Update valid usage for flink:vkCmdSetViewport and flink:vkCmdSetScissor to account for the multiple viewport feature. If the feature is not enabled, the parameters for these functions have required values that are defined in the <<features-features-multiViewport,multiple viewports>> section of the spec but were not reflected in the valid usage text for these functions. * Add the +<<VK_EXT_swapchain_colorspace>>+ extension defining common color spaces.
2017-01-18 04:11:25 +00:00
== File chapters/VK_IMG_filter_cubic/filter_cubic_texel_filtering.txt
Change log for February 10, 2017 Vulkan 1.0.40 spec update: * Bump API patch number and header version number to 40 for this update. * There is a major build change in this release. We are now using the Ruby-based ``asciidoctor'' implementation, rather than the Python-based ``asciidoc'' implementation, to process the specification. While the actual specification markup changes were minimal, this requires a new set of build tools and a very different installation process, especially because we now use an experimental direct-to-PDF backend for Asciidoctor instead of Docbook->dblatex->PDF. It is no longer possible to build the Specification using asciidoc. See doc/specs/vulkan/README.adoc for some guidance on installing the new toolchain components. * There are some minor rendering issues in the PDF output due to teething problems with the asciidoctor toolchain, especially with mathematical equations. We are aware of these and working on them. Github Issues: * Updated sample code for the <<sparsememory-examples-basic,sparse resource binding example>> (public issue 97). * Modify line and point clipping behavior in the <<vertexpostproc-clipping, Primitive Clipping>> section to allow for pop-free behavior. The ability to check for which behavior is implemented may be added a future feature or extension (public issue 113). * Unify the discussions of implicit ordering throughout the spec, in particular in the new sections <<drawing-primitive-order, Primitive Order>>, <<primrast-order, Rasterization Order>>, and <<synchronization-implicit, Implicit Synchronization Guarantees>>; the discussion of <<synchronization-submission-order, submission order>>; and references elsewhere to these sections (public issue 133). * Clarify \<\<descriptorsets-compatibility,Pipeline Layout Compatibility>> language and introduce the term ``identically defined'' (public issue 164). * Add a dependency to the +VK_EXT_debug_marker+ extension that's needed to reuse the object type enum from +VK_EXT_debug_report+, and moves the definition of that enum into +VK_EXT_debug_report+ where it should be (public issue 409). * Remove redundant valid usage statement from slink:VkImageBlit (public issue 421). * Update GL_KHR_vulkan_glsl to allow the ternary operator to result in a specialization constant (public issue 424). * Fix valid usage for flink:VkPipelineShaderStageCreateInfo (public issue 426). * Correct typo in New Objects list for <<VK_EXT_debug_report>> (public issue 447). Internal Issues: * Moved to asciidoctor for spec builds (internal issue 121). * Update style guide to describe where to put new extensions-specific asciidoc files, and what to name them (internal issue 626). * Add src/spec/indexExt.py to autogenerate registry index entries linking into the 1.0-extensions specification, instead of maintaining the index manually. (internal issue 642). * Autogenerate extension dependencies and lists of all extensions and all KHR extensions from the "supported" attributes in +vk.xml+. Execute +make config/extDependency.sh+ from +doc/specs/vulkan+ when a supported extension is added to vk.xml, to regenerate the dependency script. The consequence is that specifying a single extension to the +makeExt+ script will automatically enable all extensions it depends on as well, and that the +makeAllExts+ and +makeKHR+ scripts do not need to be updated when a new extension is supported (internal issue 648). * Put extension appendices all at the same asciidoc section level, so KHR WSI extensions show up in the HTML index (internal issue 648). Other Issues: * Imbed images in the generated HTML specs instead of loading them from the images/ directory. * Fix missing EXT in extension name (ename:VK_EXT_SWAPCHAIN_COLOR_SPACE_EXTENSION_NAME). * Add new +VK_EXT_SMPTE_2086_metadata+ extension. * In the <<platformCreateSurface_xlib,Xlib Surface>> section of the +VK_KHR_xlib_surface+ specification, add language warning users that they always need to call code:XinitThreads. * Use the term "presentable image" (rather than "swapchain image") consistently in +VK_KHR_swapchain+ and related extensions, and add a glossary term defining it. * Relocate the valid usage for samples of flink:vkGetPhysicalDeviceSparseImageFormatProperties2KHR::pname:pFormatInfo to be below the flink:VkPhysicalDeviceSparseImageFormatInfo2KHR structure.
2017-02-11 04:37:39 +00:00
=== latexmath block 60
Change log for January 23, 2017 Vulkan 1.0.39 spec update: * Bump API patch number and header version number to 39 for this update. Github Issues: * Clarified that only accesses via the specified buffer/image subresource ranges are included in the access scopes (public issue 306). * Add missing valid usage statements for flink:vkCreateComputePipelines and flink:vkCreateGraphicsPipelines (public issue 427). Internal Issues: * Add a Note to the <<invariance,Invariance>> appendix about a difference between OpenGL and Vulkan with regards to how primitives derived from offsets are handled (internal issue 355). * Add the +<<VK_KHR_get_physical_device_properties2>>+, +<<VK_KHR_maintenance1>>+, and +<<VK_KHR_shader_draw_parameters>>+ extensions (internal issue 448). * Add the +<<VK_EXT_shader_subgroup_vote>>+ and +<<VK_EXT_shader_subgroup_ballot>>+ extensions (internal issue 449). * Update the texture level-of-detail equation in the <<textures-scale-factor,Scale Factor Operation>> section to better approximate the ellipse major and minor axes (internal issue 547). * Forbid non-explicitly allowed uses of interface decorations in the introduction to the <<interfaces,Shader Interfaces>> chapter (internal issue 607). * Replace use of MathJax with KaTeX, for improved load-time performance as well as avoiding the scrolling-and-scrolling behavior due to MathJax asynchronous rendering when loading at an anchor inside the spec. This change also requires moving to HTML5 output for the spec instead of XHTML, and there is a visible difference in that the chapter navigation index is now in a scrollable sidebar instead of at the top of the document. We may or may not retain the nav sidebar based on feedback (internal issue 613). * Improve consistency of markup and formatting in extension appendices (internal issue 631). Other Issues: * Add explicit valid usage statements to slink:VkImageCopy requiring that the source and destination layer ranges be contained in their respective source and destination images. * Add valid usage language for swapchain of flink:vkAcquireNextImage. If the swapchain has been replaced, then it should not be passed to flink:vkAcquireNextImage. * Add a valid usage statement to flink:vkCreateImageView, that the image must have been created with an appropriate usage bit set. * Noted that slink:VkDisplayPresentInfoKHR is a valid extension of slink:VkPresentInfoKHR in the <<wsi_swapchain,WSI Swapchain>> section. * Update valid usage for flink:vkCmdSetViewport and flink:vkCmdSetScissor to account for the multiple viewport feature. If the feature is not enabled, the parameters for these functions have required values that are defined in the <<features-features-multiViewport,multiple viewports>> section of the spec but were not reflected in the valid usage text for these functions. * Add the +<<VK_EXT_swapchain_colorspace>>+ extension defining common color spaces.
2017-01-18 04:11:25 +00:00
[latexmath]
++++++++++++++++++++++++
Change log for February 10, 2017 Vulkan 1.0.40 spec update: * Bump API patch number and header version number to 40 for this update. * There is a major build change in this release. We are now using the Ruby-based ``asciidoctor'' implementation, rather than the Python-based ``asciidoc'' implementation, to process the specification. While the actual specification markup changes were minimal, this requires a new set of build tools and a very different installation process, especially because we now use an experimental direct-to-PDF backend for Asciidoctor instead of Docbook->dblatex->PDF. It is no longer possible to build the Specification using asciidoc. See doc/specs/vulkan/README.adoc for some guidance on installing the new toolchain components. * There are some minor rendering issues in the PDF output due to teething problems with the asciidoctor toolchain, especially with mathematical equations. We are aware of these and working on them. Github Issues: * Updated sample code for the <<sparsememory-examples-basic,sparse resource binding example>> (public issue 97). * Modify line and point clipping behavior in the <<vertexpostproc-clipping, Primitive Clipping>> section to allow for pop-free behavior. The ability to check for which behavior is implemented may be added a future feature or extension (public issue 113). * Unify the discussions of implicit ordering throughout the spec, in particular in the new sections <<drawing-primitive-order, Primitive Order>>, <<primrast-order, Rasterization Order>>, and <<synchronization-implicit, Implicit Synchronization Guarantees>>; the discussion of <<synchronization-submission-order, submission order>>; and references elsewhere to these sections (public issue 133). * Clarify \<\<descriptorsets-compatibility,Pipeline Layout Compatibility>> language and introduce the term ``identically defined'' (public issue 164). * Add a dependency to the +VK_EXT_debug_marker+ extension that's needed to reuse the object type enum from +VK_EXT_debug_report+, and moves the definition of that enum into +VK_EXT_debug_report+ where it should be (public issue 409). * Remove redundant valid usage statement from slink:VkImageBlit (public issue 421). * Update GL_KHR_vulkan_glsl to allow the ternary operator to result in a specialization constant (public issue 424). * Fix valid usage for flink:VkPipelineShaderStageCreateInfo (public issue 426). * Correct typo in New Objects list for <<VK_EXT_debug_report>> (public issue 447). Internal Issues: * Moved to asciidoctor for spec builds (internal issue 121). * Update style guide to describe where to put new extensions-specific asciidoc files, and what to name them (internal issue 626). * Add src/spec/indexExt.py to autogenerate registry index entries linking into the 1.0-extensions specification, instead of maintaining the index manually. (internal issue 642). * Autogenerate extension dependencies and lists of all extensions and all KHR extensions from the "supported" attributes in +vk.xml+. Execute +make config/extDependency.sh+ from +doc/specs/vulkan+ when a supported extension is added to vk.xml, to regenerate the dependency script. The consequence is that specifying a single extension to the +makeExt+ script will automatically enable all extensions it depends on as well, and that the +makeAllExts+ and +makeKHR+ scripts do not need to be updated when a new extension is supported (internal issue 648). * Put extension appendices all at the same asciidoc section level, so KHR WSI extensions show up in the HTML index (internal issue 648). Other Issues: * Imbed images in the generated HTML specs instead of loading them from the images/ directory. * Fix missing EXT in extension name (ename:VK_EXT_SWAPCHAIN_COLOR_SPACE_EXTENSION_NAME). * Add new +VK_EXT_SMPTE_2086_metadata+ extension. * In the <<platformCreateSurface_xlib,Xlib Surface>> section of the +VK_KHR_xlib_surface+ specification, add language warning users that they always need to call code:XinitThreads. * Use the term "presentable image" (rather than "swapchain image") consistently in +VK_KHR_swapchain+ and related extensions, and add a glossary term defining it. * Relocate the valid usage for samples of flink:vkGetPhysicalDeviceSparseImageFormatProperties2KHR::pname:pFormatInfo to be below the flink:VkPhysicalDeviceSparseImageFormatInfo2KHR structure.
2017-02-11 04:37:39 +00:00
\begin{aligned}
Change log for January 23, 2017 Vulkan 1.0.39 spec update: * Bump API patch number and header version number to 39 for this update. Github Issues: * Clarified that only accesses via the specified buffer/image subresource ranges are included in the access scopes (public issue 306). * Add missing valid usage statements for flink:vkCreateComputePipelines and flink:vkCreateGraphicsPipelines (public issue 427). Internal Issues: * Add a Note to the <<invariance,Invariance>> appendix about a difference between OpenGL and Vulkan with regards to how primitives derived from offsets are handled (internal issue 355). * Add the +<<VK_KHR_get_physical_device_properties2>>+, +<<VK_KHR_maintenance1>>+, and +<<VK_KHR_shader_draw_parameters>>+ extensions (internal issue 448). * Add the +<<VK_EXT_shader_subgroup_vote>>+ and +<<VK_EXT_shader_subgroup_ballot>>+ extensions (internal issue 449). * Update the texture level-of-detail equation in the <<textures-scale-factor,Scale Factor Operation>> section to better approximate the ellipse major and minor axes (internal issue 547). * Forbid non-explicitly allowed uses of interface decorations in the introduction to the <<interfaces,Shader Interfaces>> chapter (internal issue 607). * Replace use of MathJax with KaTeX, for improved load-time performance as well as avoiding the scrolling-and-scrolling behavior due to MathJax asynchronous rendering when loading at an anchor inside the spec. This change also requires moving to HTML5 output for the spec instead of XHTML, and there is a visible difference in that the chapter navigation index is now in a scrollable sidebar instead of at the top of the document. We may or may not retain the nav sidebar based on feedback (internal issue 613). * Improve consistency of markup and formatting in extension appendices (internal issue 631). Other Issues: * Add explicit valid usage statements to slink:VkImageCopy requiring that the source and destination layer ranges be contained in their respective source and destination images. * Add valid usage language for swapchain of flink:vkAcquireNextImage. If the swapchain has been replaced, then it should not be passed to flink:vkAcquireNextImage. * Add a valid usage statement to flink:vkCreateImageView, that the image must have been created with an appropriate usage bit set. * Noted that slink:VkDisplayPresentInfoKHR is a valid extension of slink:VkPresentInfoKHR in the <<wsi_swapchain,WSI Swapchain>> section. * Update valid usage for flink:vkCmdSetViewport and flink:vkCmdSetScissor to account for the multiple viewport feature. If the feature is not enabled, the parameters for these functions have required values that are defined in the <<features-features-multiViewport,multiple viewports>> section of the spec but were not reflected in the valid usage text for these functions. * Add the +<<VK_EXT_swapchain_colorspace>>+ extension defining common color spaces.
2017-01-18 04:11:25 +00:00
cinterp(\tau_0, \tau_1, \tau_2, \tau_3, \omega) =
\frac{1}{2}
\begin{bmatrix}1 & \omega & \omega^2 & \omega^3 \end{bmatrix}
\times
\begin{bmatrix}
0 & 2 & 0 & 0 \\
-1 & 0 & 1 & 0 \\
2 & -5 & 4 & 1 \\
-1 & 3 & -3 & 1
\end{bmatrix}
\times
\begin{bmatrix}
\tau_0 \\
\tau_1 \\
\tau_2 \\
\tau_3
\end{bmatrix}
Change log for February 10, 2017 Vulkan 1.0.40 spec update: * Bump API patch number and header version number to 40 for this update. * There is a major build change in this release. We are now using the Ruby-based ``asciidoctor'' implementation, rather than the Python-based ``asciidoc'' implementation, to process the specification. While the actual specification markup changes were minimal, this requires a new set of build tools and a very different installation process, especially because we now use an experimental direct-to-PDF backend for Asciidoctor instead of Docbook->dblatex->PDF. It is no longer possible to build the Specification using asciidoc. See doc/specs/vulkan/README.adoc for some guidance on installing the new toolchain components. * There are some minor rendering issues in the PDF output due to teething problems with the asciidoctor toolchain, especially with mathematical equations. We are aware of these and working on them. Github Issues: * Updated sample code for the <<sparsememory-examples-basic,sparse resource binding example>> (public issue 97). * Modify line and point clipping behavior in the <<vertexpostproc-clipping, Primitive Clipping>> section to allow for pop-free behavior. The ability to check for which behavior is implemented may be added a future feature or extension (public issue 113). * Unify the discussions of implicit ordering throughout the spec, in particular in the new sections <<drawing-primitive-order, Primitive Order>>, <<primrast-order, Rasterization Order>>, and <<synchronization-implicit, Implicit Synchronization Guarantees>>; the discussion of <<synchronization-submission-order, submission order>>; and references elsewhere to these sections (public issue 133). * Clarify \<\<descriptorsets-compatibility,Pipeline Layout Compatibility>> language and introduce the term ``identically defined'' (public issue 164). * Add a dependency to the +VK_EXT_debug_marker+ extension that's needed to reuse the object type enum from +VK_EXT_debug_report+, and moves the definition of that enum into +VK_EXT_debug_report+ where it should be (public issue 409). * Remove redundant valid usage statement from slink:VkImageBlit (public issue 421). * Update GL_KHR_vulkan_glsl to allow the ternary operator to result in a specialization constant (public issue 424). * Fix valid usage for flink:VkPipelineShaderStageCreateInfo (public issue 426). * Correct typo in New Objects list for <<VK_EXT_debug_report>> (public issue 447). Internal Issues: * Moved to asciidoctor for spec builds (internal issue 121). * Update style guide to describe where to put new extensions-specific asciidoc files, and what to name them (internal issue 626). * Add src/spec/indexExt.py to autogenerate registry index entries linking into the 1.0-extensions specification, instead of maintaining the index manually. (internal issue 642). * Autogenerate extension dependencies and lists of all extensions and all KHR extensions from the "supported" attributes in +vk.xml+. Execute +make config/extDependency.sh+ from +doc/specs/vulkan+ when a supported extension is added to vk.xml, to regenerate the dependency script. The consequence is that specifying a single extension to the +makeExt+ script will automatically enable all extensions it depends on as well, and that the +makeAllExts+ and +makeKHR+ scripts do not need to be updated when a new extension is supported (internal issue 648). * Put extension appendices all at the same asciidoc section level, so KHR WSI extensions show up in the HTML index (internal issue 648). Other Issues: * Imbed images in the generated HTML specs instead of loading them from the images/ directory. * Fix missing EXT in extension name (ename:VK_EXT_SWAPCHAIN_COLOR_SPACE_EXTENSION_NAME). * Add new +VK_EXT_SMPTE_2086_metadata+ extension. * In the <<platformCreateSurface_xlib,Xlib Surface>> section of the +VK_KHR_xlib_surface+ specification, add language warning users that they always need to call code:XinitThreads. * Use the term "presentable image" (rather than "swapchain image") consistently in +VK_KHR_swapchain+ and related extensions, and add a glossary term defining it. * Relocate the valid usage for samples of flink:vkGetPhysicalDeviceSparseImageFormatProperties2KHR::pname:pFormatInfo to be below the flink:VkPhysicalDeviceSparseImageFormatInfo2KHR structure.
2017-02-11 04:37:39 +00:00
\end{aligned}
Change log for January 23, 2017 Vulkan 1.0.39 spec update: * Bump API patch number and header version number to 39 for this update. Github Issues: * Clarified that only accesses via the specified buffer/image subresource ranges are included in the access scopes (public issue 306). * Add missing valid usage statements for flink:vkCreateComputePipelines and flink:vkCreateGraphicsPipelines (public issue 427). Internal Issues: * Add a Note to the <<invariance,Invariance>> appendix about a difference between OpenGL and Vulkan with regards to how primitives derived from offsets are handled (internal issue 355). * Add the +<<VK_KHR_get_physical_device_properties2>>+, +<<VK_KHR_maintenance1>>+, and +<<VK_KHR_shader_draw_parameters>>+ extensions (internal issue 448). * Add the +<<VK_EXT_shader_subgroup_vote>>+ and +<<VK_EXT_shader_subgroup_ballot>>+ extensions (internal issue 449). * Update the texture level-of-detail equation in the <<textures-scale-factor,Scale Factor Operation>> section to better approximate the ellipse major and minor axes (internal issue 547). * Forbid non-explicitly allowed uses of interface decorations in the introduction to the <<interfaces,Shader Interfaces>> chapter (internal issue 607). * Replace use of MathJax with KaTeX, for improved load-time performance as well as avoiding the scrolling-and-scrolling behavior due to MathJax asynchronous rendering when loading at an anchor inside the spec. This change also requires moving to HTML5 output for the spec instead of XHTML, and there is a visible difference in that the chapter navigation index is now in a scrollable sidebar instead of at the top of the document. We may or may not retain the nav sidebar based on feedback (internal issue 613). * Improve consistency of markup and formatting in extension appendices (internal issue 631). Other Issues: * Add explicit valid usage statements to slink:VkImageCopy requiring that the source and destination layer ranges be contained in their respective source and destination images. * Add valid usage language for swapchain of flink:vkAcquireNextImage. If the swapchain has been replaced, then it should not be passed to flink:vkAcquireNextImage. * Add a valid usage statement to flink:vkCreateImageView, that the image must have been created with an appropriate usage bit set. * Noted that slink:VkDisplayPresentInfoKHR is a valid extension of slink:VkPresentInfoKHR in the <<wsi_swapchain,WSI Swapchain>> section. * Update valid usage for flink:vkCmdSetViewport and flink:vkCmdSetScissor to account for the multiple viewport feature. If the feature is not enabled, the parameters for these functions have required values that are defined in the <<features-features-multiViewport,multiple viewports>> section of the spec but were not reflected in the valid usage text for these functions. * Add the +<<VK_EXT_swapchain_colorspace>>+ extension defining common color spaces.
2017-01-18 04:11:25 +00:00
++++++++++++++++++++++++
Change log for February 10, 2017 Vulkan 1.0.40 spec update: * Bump API patch number and header version number to 40 for this update. * There is a major build change in this release. We are now using the Ruby-based ``asciidoctor'' implementation, rather than the Python-based ``asciidoc'' implementation, to process the specification. While the actual specification markup changes were minimal, this requires a new set of build tools and a very different installation process, especially because we now use an experimental direct-to-PDF backend for Asciidoctor instead of Docbook->dblatex->PDF. It is no longer possible to build the Specification using asciidoc. See doc/specs/vulkan/README.adoc for some guidance on installing the new toolchain components. * There are some minor rendering issues in the PDF output due to teething problems with the asciidoctor toolchain, especially with mathematical equations. We are aware of these and working on them. Github Issues: * Updated sample code for the <<sparsememory-examples-basic,sparse resource binding example>> (public issue 97). * Modify line and point clipping behavior in the <<vertexpostproc-clipping, Primitive Clipping>> section to allow for pop-free behavior. The ability to check for which behavior is implemented may be added a future feature or extension (public issue 113). * Unify the discussions of implicit ordering throughout the spec, in particular in the new sections <<drawing-primitive-order, Primitive Order>>, <<primrast-order, Rasterization Order>>, and <<synchronization-implicit, Implicit Synchronization Guarantees>>; the discussion of <<synchronization-submission-order, submission order>>; and references elsewhere to these sections (public issue 133). * Clarify \<\<descriptorsets-compatibility,Pipeline Layout Compatibility>> language and introduce the term ``identically defined'' (public issue 164). * Add a dependency to the +VK_EXT_debug_marker+ extension that's needed to reuse the object type enum from +VK_EXT_debug_report+, and moves the definition of that enum into +VK_EXT_debug_report+ where it should be (public issue 409). * Remove redundant valid usage statement from slink:VkImageBlit (public issue 421). * Update GL_KHR_vulkan_glsl to allow the ternary operator to result in a specialization constant (public issue 424). * Fix valid usage for flink:VkPipelineShaderStageCreateInfo (public issue 426). * Correct typo in New Objects list for <<VK_EXT_debug_report>> (public issue 447). Internal Issues: * Moved to asciidoctor for spec builds (internal issue 121). * Update style guide to describe where to put new extensions-specific asciidoc files, and what to name them (internal issue 626). * Add src/spec/indexExt.py to autogenerate registry index entries linking into the 1.0-extensions specification, instead of maintaining the index manually. (internal issue 642). * Autogenerate extension dependencies and lists of all extensions and all KHR extensions from the "supported" attributes in +vk.xml+. Execute +make config/extDependency.sh+ from +doc/specs/vulkan+ when a supported extension is added to vk.xml, to regenerate the dependency script. The consequence is that specifying a single extension to the +makeExt+ script will automatically enable all extensions it depends on as well, and that the +makeAllExts+ and +makeKHR+ scripts do not need to be updated when a new extension is supported (internal issue 648). * Put extension appendices all at the same asciidoc section level, so KHR WSI extensions show up in the HTML index (internal issue 648). Other Issues: * Imbed images in the generated HTML specs instead of loading them from the images/ directory. * Fix missing EXT in extension name (ename:VK_EXT_SWAPCHAIN_COLOR_SPACE_EXTENSION_NAME). * Add new +VK_EXT_SMPTE_2086_metadata+ extension. * In the <<platformCreateSurface_xlib,Xlib Surface>> section of the +VK_KHR_xlib_surface+ specification, add language warning users that they always need to call code:XinitThreads. * Use the term "presentable image" (rather than "swapchain image") consistently in +VK_KHR_swapchain+ and related extensions, and add a glossary term defining it. * Relocate the valid usage for samples of flink:vkGetPhysicalDeviceSparseImageFormatProperties2KHR::pname:pFormatInfo to be below the flink:VkPhysicalDeviceSparseImageFormatInfo2KHR structure.
2017-02-11 04:37:39 +00:00
=== latexmath block 61
Change log for January 23, 2017 Vulkan 1.0.39 spec update: * Bump API patch number and header version number to 39 for this update. Github Issues: * Clarified that only accesses via the specified buffer/image subresource ranges are included in the access scopes (public issue 306). * Add missing valid usage statements for flink:vkCreateComputePipelines and flink:vkCreateGraphicsPipelines (public issue 427). Internal Issues: * Add a Note to the <<invariance,Invariance>> appendix about a difference between OpenGL and Vulkan with regards to how primitives derived from offsets are handled (internal issue 355). * Add the +<<VK_KHR_get_physical_device_properties2>>+, +<<VK_KHR_maintenance1>>+, and +<<VK_KHR_shader_draw_parameters>>+ extensions (internal issue 448). * Add the +<<VK_EXT_shader_subgroup_vote>>+ and +<<VK_EXT_shader_subgroup_ballot>>+ extensions (internal issue 449). * Update the texture level-of-detail equation in the <<textures-scale-factor,Scale Factor Operation>> section to better approximate the ellipse major and minor axes (internal issue 547). * Forbid non-explicitly allowed uses of interface decorations in the introduction to the <<interfaces,Shader Interfaces>> chapter (internal issue 607). * Replace use of MathJax with KaTeX, for improved load-time performance as well as avoiding the scrolling-and-scrolling behavior due to MathJax asynchronous rendering when loading at an anchor inside the spec. This change also requires moving to HTML5 output for the spec instead of XHTML, and there is a visible difference in that the chapter navigation index is now in a scrollable sidebar instead of at the top of the document. We may or may not retain the nav sidebar based on feedback (internal issue 613). * Improve consistency of markup and formatting in extension appendices (internal issue 631). Other Issues: * Add explicit valid usage statements to slink:VkImageCopy requiring that the source and destination layer ranges be contained in their respective source and destination images. * Add valid usage language for swapchain of flink:vkAcquireNextImage. If the swapchain has been replaced, then it should not be passed to flink:vkAcquireNextImage. * Add a valid usage statement to flink:vkCreateImageView, that the image must have been created with an appropriate usage bit set. * Noted that slink:VkDisplayPresentInfoKHR is a valid extension of slink:VkPresentInfoKHR in the <<wsi_swapchain,WSI Swapchain>> section. * Update valid usage for flink:vkCmdSetViewport and flink:vkCmdSetScissor to account for the multiple viewport feature. If the feature is not enabled, the parameters for these functions have required values that are defined in the <<features-features-multiViewport,multiple viewports>> section of the spec but were not reflected in the valid usage text for these functions. * Add the +<<VK_EXT_swapchain_colorspace>>+ extension defining common color spaces.
2017-01-18 04:11:25 +00:00
[latexmath]
++++++++++++++++++++++++
Change log for February 10, 2017 Vulkan 1.0.40 spec update: * Bump API patch number and header version number to 40 for this update. * There is a major build change in this release. We are now using the Ruby-based ``asciidoctor'' implementation, rather than the Python-based ``asciidoc'' implementation, to process the specification. While the actual specification markup changes were minimal, this requires a new set of build tools and a very different installation process, especially because we now use an experimental direct-to-PDF backend for Asciidoctor instead of Docbook->dblatex->PDF. It is no longer possible to build the Specification using asciidoc. See doc/specs/vulkan/README.adoc for some guidance on installing the new toolchain components. * There are some minor rendering issues in the PDF output due to teething problems with the asciidoctor toolchain, especially with mathematical equations. We are aware of these and working on them. Github Issues: * Updated sample code for the <<sparsememory-examples-basic,sparse resource binding example>> (public issue 97). * Modify line and point clipping behavior in the <<vertexpostproc-clipping, Primitive Clipping>> section to allow for pop-free behavior. The ability to check for which behavior is implemented may be added a future feature or extension (public issue 113). * Unify the discussions of implicit ordering throughout the spec, in particular in the new sections <<drawing-primitive-order, Primitive Order>>, <<primrast-order, Rasterization Order>>, and <<synchronization-implicit, Implicit Synchronization Guarantees>>; the discussion of <<synchronization-submission-order, submission order>>; and references elsewhere to these sections (public issue 133). * Clarify \<\<descriptorsets-compatibility,Pipeline Layout Compatibility>> language and introduce the term ``identically defined'' (public issue 164). * Add a dependency to the +VK_EXT_debug_marker+ extension that's needed to reuse the object type enum from +VK_EXT_debug_report+, and moves the definition of that enum into +VK_EXT_debug_report+ where it should be (public issue 409). * Remove redundant valid usage statement from slink:VkImageBlit (public issue 421). * Update GL_KHR_vulkan_glsl to allow the ternary operator to result in a specialization constant (public issue 424). * Fix valid usage for flink:VkPipelineShaderStageCreateInfo (public issue 426). * Correct typo in New Objects list for <<VK_EXT_debug_report>> (public issue 447). Internal Issues: * Moved to asciidoctor for spec builds (internal issue 121). * Update style guide to describe where to put new extensions-specific asciidoc files, and what to name them (internal issue 626). * Add src/spec/indexExt.py to autogenerate registry index entries linking into the 1.0-extensions specification, instead of maintaining the index manually. (internal issue 642). * Autogenerate extension dependencies and lists of all extensions and all KHR extensions from the "supported" attributes in +vk.xml+. Execute +make config/extDependency.sh+ from +doc/specs/vulkan+ when a supported extension is added to vk.xml, to regenerate the dependency script. The consequence is that specifying a single extension to the +makeExt+ script will automatically enable all extensions it depends on as well, and that the +makeAllExts+ and +makeKHR+ scripts do not need to be updated when a new extension is supported (internal issue 648). * Put extension appendices all at the same asciidoc section level, so KHR WSI extensions show up in the HTML index (internal issue 648). Other Issues: * Imbed images in the generated HTML specs instead of loading them from the images/ directory. * Fix missing EXT in extension name (ename:VK_EXT_SWAPCHAIN_COLOR_SPACE_EXTENSION_NAME). * Add new +VK_EXT_SMPTE_2086_metadata+ extension. * In the <<platformCreateSurface_xlib,Xlib Surface>> section of the +VK_KHR_xlib_surface+ specification, add language warning users that they always need to call code:XinitThreads. * Use the term "presentable image" (rather than "swapchain image") consistently in +VK_KHR_swapchain+ and related extensions, and add a glossary term defining it. * Relocate the valid usage for samples of flink:vkGetPhysicalDeviceSparseImageFormatProperties2KHR::pname:pFormatInfo to be below the flink:VkPhysicalDeviceSparseImageFormatInfo2KHR structure.
2017-02-11 04:37:39 +00:00
\begin{aligned}
Change log for January 23, 2017 Vulkan 1.0.39 spec update: * Bump API patch number and header version number to 39 for this update. Github Issues: * Clarified that only accesses via the specified buffer/image subresource ranges are included in the access scopes (public issue 306). * Add missing valid usage statements for flink:vkCreateComputePipelines and flink:vkCreateGraphicsPipelines (public issue 427). Internal Issues: * Add a Note to the <<invariance,Invariance>> appendix about a difference between OpenGL and Vulkan with regards to how primitives derived from offsets are handled (internal issue 355). * Add the +<<VK_KHR_get_physical_device_properties2>>+, +<<VK_KHR_maintenance1>>+, and +<<VK_KHR_shader_draw_parameters>>+ extensions (internal issue 448). * Add the +<<VK_EXT_shader_subgroup_vote>>+ and +<<VK_EXT_shader_subgroup_ballot>>+ extensions (internal issue 449). * Update the texture level-of-detail equation in the <<textures-scale-factor,Scale Factor Operation>> section to better approximate the ellipse major and minor axes (internal issue 547). * Forbid non-explicitly allowed uses of interface decorations in the introduction to the <<interfaces,Shader Interfaces>> chapter (internal issue 607). * Replace use of MathJax with KaTeX, for improved load-time performance as well as avoiding the scrolling-and-scrolling behavior due to MathJax asynchronous rendering when loading at an anchor inside the spec. This change also requires moving to HTML5 output for the spec instead of XHTML, and there is a visible difference in that the chapter navigation index is now in a scrollable sidebar instead of at the top of the document. We may or may not retain the nav sidebar based on feedback (internal issue 613). * Improve consistency of markup and formatting in extension appendices (internal issue 631). Other Issues: * Add explicit valid usage statements to slink:VkImageCopy requiring that the source and destination layer ranges be contained in their respective source and destination images. * Add valid usage language for swapchain of flink:vkAcquireNextImage. If the swapchain has been replaced, then it should not be passed to flink:vkAcquireNextImage. * Add a valid usage statement to flink:vkCreateImageView, that the image must have been created with an appropriate usage bit set. * Noted that slink:VkDisplayPresentInfoKHR is a valid extension of slink:VkPresentInfoKHR in the <<wsi_swapchain,WSI Swapchain>> section. * Update valid usage for flink:vkCmdSetViewport and flink:vkCmdSetScissor to account for the multiple viewport feature. If the feature is not enabled, the parameters for these functions have required values that are defined in the <<features-features-multiViewport,multiple viewports>> section of the spec but were not reflected in the valid usage text for these functions. * Add the +<<VK_EXT_swapchain_colorspace>>+ extension defining common color spaces.
2017-01-18 04:11:25 +00:00
\tau[level] &=
\begin{cases}
\tau_{2D}[level], & \text{for 2D image} \\
\tau_{1D}[level], & \text{for 1D image}
\end{cases}
Change log for February 10, 2017 Vulkan 1.0.40 spec update: * Bump API patch number and header version number to 40 for this update. * There is a major build change in this release. We are now using the Ruby-based ``asciidoctor'' implementation, rather than the Python-based ``asciidoc'' implementation, to process the specification. While the actual specification markup changes were minimal, this requires a new set of build tools and a very different installation process, especially because we now use an experimental direct-to-PDF backend for Asciidoctor instead of Docbook->dblatex->PDF. It is no longer possible to build the Specification using asciidoc. See doc/specs/vulkan/README.adoc for some guidance on installing the new toolchain components. * There are some minor rendering issues in the PDF output due to teething problems with the asciidoctor toolchain, especially with mathematical equations. We are aware of these and working on them. Github Issues: * Updated sample code for the <<sparsememory-examples-basic,sparse resource binding example>> (public issue 97). * Modify line and point clipping behavior in the <<vertexpostproc-clipping, Primitive Clipping>> section to allow for pop-free behavior. The ability to check for which behavior is implemented may be added a future feature or extension (public issue 113). * Unify the discussions of implicit ordering throughout the spec, in particular in the new sections <<drawing-primitive-order, Primitive Order>>, <<primrast-order, Rasterization Order>>, and <<synchronization-implicit, Implicit Synchronization Guarantees>>; the discussion of <<synchronization-submission-order, submission order>>; and references elsewhere to these sections (public issue 133). * Clarify \<\<descriptorsets-compatibility,Pipeline Layout Compatibility>> language and introduce the term ``identically defined'' (public issue 164). * Add a dependency to the +VK_EXT_debug_marker+ extension that's needed to reuse the object type enum from +VK_EXT_debug_report+, and moves the definition of that enum into +VK_EXT_debug_report+ where it should be (public issue 409). * Remove redundant valid usage statement from slink:VkImageBlit (public issue 421). * Update GL_KHR_vulkan_glsl to allow the ternary operator to result in a specialization constant (public issue 424). * Fix valid usage for flink:VkPipelineShaderStageCreateInfo (public issue 426). * Correct typo in New Objects list for <<VK_EXT_debug_report>> (public issue 447). Internal Issues: * Moved to asciidoctor for spec builds (internal issue 121). * Update style guide to describe where to put new extensions-specific asciidoc files, and what to name them (internal issue 626). * Add src/spec/indexExt.py to autogenerate registry index entries linking into the 1.0-extensions specification, instead of maintaining the index manually. (internal issue 642). * Autogenerate extension dependencies and lists of all extensions and all KHR extensions from the "supported" attributes in +vk.xml+. Execute +make config/extDependency.sh+ from +doc/specs/vulkan+ when a supported extension is added to vk.xml, to regenerate the dependency script. The consequence is that specifying a single extension to the +makeExt+ script will automatically enable all extensions it depends on as well, and that the +makeAllExts+ and +makeKHR+ scripts do not need to be updated when a new extension is supported (internal issue 648). * Put extension appendices all at the same asciidoc section level, so KHR WSI extensions show up in the HTML index (internal issue 648). Other Issues: * Imbed images in the generated HTML specs instead of loading them from the images/ directory. * Fix missing EXT in extension name (ename:VK_EXT_SWAPCHAIN_COLOR_SPACE_EXTENSION_NAME). * Add new +VK_EXT_SMPTE_2086_metadata+ extension. * In the <<platformCreateSurface_xlib,Xlib Surface>> section of the +VK_KHR_xlib_surface+ specification, add language warning users that they always need to call code:XinitThreads. * Use the term "presentable image" (rather than "swapchain image") consistently in +VK_KHR_swapchain+ and related extensions, and add a glossary term defining it. * Relocate the valid usage for samples of flink:vkGetPhysicalDeviceSparseImageFormatProperties2KHR::pname:pFormatInfo to be below the flink:VkPhysicalDeviceSparseImageFormatInfo2KHR structure.
2017-02-11 04:37:39 +00:00
\end{aligned}
Change log for January 23, 2017 Vulkan 1.0.39 spec update: * Bump API patch number and header version number to 39 for this update. Github Issues: * Clarified that only accesses via the specified buffer/image subresource ranges are included in the access scopes (public issue 306). * Add missing valid usage statements for flink:vkCreateComputePipelines and flink:vkCreateGraphicsPipelines (public issue 427). Internal Issues: * Add a Note to the <<invariance,Invariance>> appendix about a difference between OpenGL and Vulkan with regards to how primitives derived from offsets are handled (internal issue 355). * Add the +<<VK_KHR_get_physical_device_properties2>>+, +<<VK_KHR_maintenance1>>+, and +<<VK_KHR_shader_draw_parameters>>+ extensions (internal issue 448). * Add the +<<VK_EXT_shader_subgroup_vote>>+ and +<<VK_EXT_shader_subgroup_ballot>>+ extensions (internal issue 449). * Update the texture level-of-detail equation in the <<textures-scale-factor,Scale Factor Operation>> section to better approximate the ellipse major and minor axes (internal issue 547). * Forbid non-explicitly allowed uses of interface decorations in the introduction to the <<interfaces,Shader Interfaces>> chapter (internal issue 607). * Replace use of MathJax with KaTeX, for improved load-time performance as well as avoiding the scrolling-and-scrolling behavior due to MathJax asynchronous rendering when loading at an anchor inside the spec. This change also requires moving to HTML5 output for the spec instead of XHTML, and there is a visible difference in that the chapter navigation index is now in a scrollable sidebar instead of at the top of the document. We may or may not retain the nav sidebar based on feedback (internal issue 613). * Improve consistency of markup and formatting in extension appendices (internal issue 631). Other Issues: * Add explicit valid usage statements to slink:VkImageCopy requiring that the source and destination layer ranges be contained in their respective source and destination images. * Add valid usage language for swapchain of flink:vkAcquireNextImage. If the swapchain has been replaced, then it should not be passed to flink:vkAcquireNextImage. * Add a valid usage statement to flink:vkCreateImageView, that the image must have been created with an appropriate usage bit set. * Noted that slink:VkDisplayPresentInfoKHR is a valid extension of slink:VkPresentInfoKHR in the <<wsi_swapchain,WSI Swapchain>> section. * Update valid usage for flink:vkCmdSetViewport and flink:vkCmdSetScissor to account for the multiple viewport feature. If the feature is not enabled, the parameters for these functions have required values that are defined in the <<features-features-multiViewport,multiple viewports>> section of the spec but were not reflected in the valid usage text for these functions. * Add the +<<VK_EXT_swapchain_colorspace>>+ extension defining common color spaces.
2017-01-18 04:11:25 +00:00
++++++++++++++++++++++++
== File chapters/VK_IMG_filter_cubic/filter_cubic_texel_selection.txt
Change log for February 10, 2017 Vulkan 1.0.40 spec update: * Bump API patch number and header version number to 40 for this update. * There is a major build change in this release. We are now using the Ruby-based ``asciidoctor'' implementation, rather than the Python-based ``asciidoc'' implementation, to process the specification. While the actual specification markup changes were minimal, this requires a new set of build tools and a very different installation process, especially because we now use an experimental direct-to-PDF backend for Asciidoctor instead of Docbook->dblatex->PDF. It is no longer possible to build the Specification using asciidoc. See doc/specs/vulkan/README.adoc for some guidance on installing the new toolchain components. * There are some minor rendering issues in the PDF output due to teething problems with the asciidoctor toolchain, especially with mathematical equations. We are aware of these and working on them. Github Issues: * Updated sample code for the <<sparsememory-examples-basic,sparse resource binding example>> (public issue 97). * Modify line and point clipping behavior in the <<vertexpostproc-clipping, Primitive Clipping>> section to allow for pop-free behavior. The ability to check for which behavior is implemented may be added a future feature or extension (public issue 113). * Unify the discussions of implicit ordering throughout the spec, in particular in the new sections <<drawing-primitive-order, Primitive Order>>, <<primrast-order, Rasterization Order>>, and <<synchronization-implicit, Implicit Synchronization Guarantees>>; the discussion of <<synchronization-submission-order, submission order>>; and references elsewhere to these sections (public issue 133). * Clarify \<\<descriptorsets-compatibility,Pipeline Layout Compatibility>> language and introduce the term ``identically defined'' (public issue 164). * Add a dependency to the +VK_EXT_debug_marker+ extension that's needed to reuse the object type enum from +VK_EXT_debug_report+, and moves the definition of that enum into +VK_EXT_debug_report+ where it should be (public issue 409). * Remove redundant valid usage statement from slink:VkImageBlit (public issue 421). * Update GL_KHR_vulkan_glsl to allow the ternary operator to result in a specialization constant (public issue 424). * Fix valid usage for flink:VkPipelineShaderStageCreateInfo (public issue 426). * Correct typo in New Objects list for <<VK_EXT_debug_report>> (public issue 447). Internal Issues: * Moved to asciidoctor for spec builds (internal issue 121). * Update style guide to describe where to put new extensions-specific asciidoc files, and what to name them (internal issue 626). * Add src/spec/indexExt.py to autogenerate registry index entries linking into the 1.0-extensions specification, instead of maintaining the index manually. (internal issue 642). * Autogenerate extension dependencies and lists of all extensions and all KHR extensions from the "supported" attributes in +vk.xml+. Execute +make config/extDependency.sh+ from +doc/specs/vulkan+ when a supported extension is added to vk.xml, to regenerate the dependency script. The consequence is that specifying a single extension to the +makeExt+ script will automatically enable all extensions it depends on as well, and that the +makeAllExts+ and +makeKHR+ scripts do not need to be updated when a new extension is supported (internal issue 648). * Put extension appendices all at the same asciidoc section level, so KHR WSI extensions show up in the HTML index (internal issue 648). Other Issues: * Imbed images in the generated HTML specs instead of loading them from the images/ directory. * Fix missing EXT in extension name (ename:VK_EXT_SWAPCHAIN_COLOR_SPACE_EXTENSION_NAME). * Add new +VK_EXT_SMPTE_2086_metadata+ extension. * In the <<platformCreateSurface_xlib,Xlib Surface>> section of the +VK_KHR_xlib_surface+ specification, add language warning users that they always need to call code:XinitThreads. * Use the term "presentable image" (rather than "swapchain image") consistently in +VK_KHR_swapchain+ and related extensions, and add a glossary term defining it. * Relocate the valid usage for samples of flink:vkGetPhysicalDeviceSparseImageFormatProperties2KHR::pname:pFormatInfo to be below the flink:VkPhysicalDeviceSparseImageFormatInfo2KHR structure.
2017-02-11 04:37:39 +00:00
=== latexmath block 62
Change log for January 23, 2017 Vulkan 1.0.39 spec update: * Bump API patch number and header version number to 39 for this update. Github Issues: * Clarified that only accesses via the specified buffer/image subresource ranges are included in the access scopes (public issue 306). * Add missing valid usage statements for flink:vkCreateComputePipelines and flink:vkCreateGraphicsPipelines (public issue 427). Internal Issues: * Add a Note to the <<invariance,Invariance>> appendix about a difference between OpenGL and Vulkan with regards to how primitives derived from offsets are handled (internal issue 355). * Add the +<<VK_KHR_get_physical_device_properties2>>+, +<<VK_KHR_maintenance1>>+, and +<<VK_KHR_shader_draw_parameters>>+ extensions (internal issue 448). * Add the +<<VK_EXT_shader_subgroup_vote>>+ and +<<VK_EXT_shader_subgroup_ballot>>+ extensions (internal issue 449). * Update the texture level-of-detail equation in the <<textures-scale-factor,Scale Factor Operation>> section to better approximate the ellipse major and minor axes (internal issue 547). * Forbid non-explicitly allowed uses of interface decorations in the introduction to the <<interfaces,Shader Interfaces>> chapter (internal issue 607). * Replace use of MathJax with KaTeX, for improved load-time performance as well as avoiding the scrolling-and-scrolling behavior due to MathJax asynchronous rendering when loading at an anchor inside the spec. This change also requires moving to HTML5 output for the spec instead of XHTML, and there is a visible difference in that the chapter navigation index is now in a scrollable sidebar instead of at the top of the document. We may or may not retain the nav sidebar based on feedback (internal issue 613). * Improve consistency of markup and formatting in extension appendices (internal issue 631). Other Issues: * Add explicit valid usage statements to slink:VkImageCopy requiring that the source and destination layer ranges be contained in their respective source and destination images. * Add valid usage language for swapchain of flink:vkAcquireNextImage. If the swapchain has been replaced, then it should not be passed to flink:vkAcquireNextImage. * Add a valid usage statement to flink:vkCreateImageView, that the image must have been created with an appropriate usage bit set. * Noted that slink:VkDisplayPresentInfoKHR is a valid extension of slink:VkPresentInfoKHR in the <<wsi_swapchain,WSI Swapchain>> section. * Update valid usage for flink:vkCmdSetViewport and flink:vkCmdSetScissor to account for the multiple viewport feature. If the feature is not enabled, the parameters for these functions have required values that are defined in the <<features-features-multiViewport,multiple viewports>> section of the spec but were not reflected in the valid usage text for these functions. * Add the +<<VK_EXT_swapchain_colorspace>>+ extension defining common color spaces.
2017-01-18 04:11:25 +00:00
[latexmath]
++++++++++++++++++++++++
Change log for February 10, 2017 Vulkan 1.0.40 spec update: * Bump API patch number and header version number to 40 for this update. * There is a major build change in this release. We are now using the Ruby-based ``asciidoctor'' implementation, rather than the Python-based ``asciidoc'' implementation, to process the specification. While the actual specification markup changes were minimal, this requires a new set of build tools and a very different installation process, especially because we now use an experimental direct-to-PDF backend for Asciidoctor instead of Docbook->dblatex->PDF. It is no longer possible to build the Specification using asciidoc. See doc/specs/vulkan/README.adoc for some guidance on installing the new toolchain components. * There are some minor rendering issues in the PDF output due to teething problems with the asciidoctor toolchain, especially with mathematical equations. We are aware of these and working on them. Github Issues: * Updated sample code for the <<sparsememory-examples-basic,sparse resource binding example>> (public issue 97). * Modify line and point clipping behavior in the <<vertexpostproc-clipping, Primitive Clipping>> section to allow for pop-free behavior. The ability to check for which behavior is implemented may be added a future feature or extension (public issue 113). * Unify the discussions of implicit ordering throughout the spec, in particular in the new sections <<drawing-primitive-order, Primitive Order>>, <<primrast-order, Rasterization Order>>, and <<synchronization-implicit, Implicit Synchronization Guarantees>>; the discussion of <<synchronization-submission-order, submission order>>; and references elsewhere to these sections (public issue 133). * Clarify \<\<descriptorsets-compatibility,Pipeline Layout Compatibility>> language and introduce the term ``identically defined'' (public issue 164). * Add a dependency to the +VK_EXT_debug_marker+ extension that's needed to reuse the object type enum from +VK_EXT_debug_report+, and moves the definition of that enum into +VK_EXT_debug_report+ where it should be (public issue 409). * Remove redundant valid usage statement from slink:VkImageBlit (public issue 421). * Update GL_KHR_vulkan_glsl to allow the ternary operator to result in a specialization constant (public issue 424). * Fix valid usage for flink:VkPipelineShaderStageCreateInfo (public issue 426). * Correct typo in New Objects list for <<VK_EXT_debug_report>> (public issue 447). Internal Issues: * Moved to asciidoctor for spec builds (internal issue 121). * Update style guide to describe where to put new extensions-specific asciidoc files, and what to name them (internal issue 626). * Add src/spec/indexExt.py to autogenerate registry index entries linking into the 1.0-extensions specification, instead of maintaining the index manually. (internal issue 642). * Autogenerate extension dependencies and lists of all extensions and all KHR extensions from the "supported" attributes in +vk.xml+. Execute +make config/extDependency.sh+ from +doc/specs/vulkan+ when a supported extension is added to vk.xml, to regenerate the dependency script. The consequence is that specifying a single extension to the +makeExt+ script will automatically enable all extensions it depends on as well, and that the +makeAllExts+ and +makeKHR+ scripts do not need to be updated when a new extension is supported (internal issue 648). * Put extension appendices all at the same asciidoc section level, so KHR WSI extensions show up in the HTML index (internal issue 648). Other Issues: * Imbed images in the generated HTML specs instead of loading them from the images/ directory. * Fix missing EXT in extension name (ename:VK_EXT_SWAPCHAIN_COLOR_SPACE_EXTENSION_NAME). * Add new +VK_EXT_SMPTE_2086_metadata+ extension. * In the <<platformCreateSurface_xlib,Xlib Surface>> section of the +VK_KHR_xlib_surface+ specification, add language warning users that they always need to call code:XinitThreads. * Use the term "presentable image" (rather than "swapchain image") consistently in +VK_KHR_swapchain+ and related extensions, and add a glossary term defining it. * Relocate the valid usage for samples of flink:vkGetPhysicalDeviceSparseImageFormatProperties2KHR::pname:pFormatInfo to be below the flink:VkPhysicalDeviceSparseImageFormatInfo2KHR structure.
2017-02-11 04:37:39 +00:00
\begin{aligned}
Change log for January 23, 2017 Vulkan 1.0.39 spec update: * Bump API patch number and header version number to 39 for this update. Github Issues: * Clarified that only accesses via the specified buffer/image subresource ranges are included in the access scopes (public issue 306). * Add missing valid usage statements for flink:vkCreateComputePipelines and flink:vkCreateGraphicsPipelines (public issue 427). Internal Issues: * Add a Note to the <<invariance,Invariance>> appendix about a difference between OpenGL and Vulkan with regards to how primitives derived from offsets are handled (internal issue 355). * Add the +<<VK_KHR_get_physical_device_properties2>>+, +<<VK_KHR_maintenance1>>+, and +<<VK_KHR_shader_draw_parameters>>+ extensions (internal issue 448). * Add the +<<VK_EXT_shader_subgroup_vote>>+ and +<<VK_EXT_shader_subgroup_ballot>>+ extensions (internal issue 449). * Update the texture level-of-detail equation in the <<textures-scale-factor,Scale Factor Operation>> section to better approximate the ellipse major and minor axes (internal issue 547). * Forbid non-explicitly allowed uses of interface decorations in the introduction to the <<interfaces,Shader Interfaces>> chapter (internal issue 607). * Replace use of MathJax with KaTeX, for improved load-time performance as well as avoiding the scrolling-and-scrolling behavior due to MathJax asynchronous rendering when loading at an anchor inside the spec. This change also requires moving to HTML5 output for the spec instead of XHTML, and there is a visible difference in that the chapter navigation index is now in a scrollable sidebar instead of at the top of the document. We may or may not retain the nav sidebar based on feedback (internal issue 613). * Improve consistency of markup and formatting in extension appendices (internal issue 631). Other Issues: * Add explicit valid usage statements to slink:VkImageCopy requiring that the source and destination layer ranges be contained in their respective source and destination images. * Add valid usage language for swapchain of flink:vkAcquireNextImage. If the swapchain has been replaced, then it should not be passed to flink:vkAcquireNextImage. * Add a valid usage statement to flink:vkCreateImageView, that the image must have been created with an appropriate usage bit set. * Noted that slink:VkDisplayPresentInfoKHR is a valid extension of slink:VkPresentInfoKHR in the <<wsi_swapchain,WSI Swapchain>> section. * Update valid usage for flink:vkCmdSetViewport and flink:vkCmdSetScissor to account for the multiple viewport feature. If the feature is not enabled, the parameters for these functions have required values that are defined in the <<features-features-multiViewport,multiple viewports>> section of the spec but were not reflected in the valid usage text for these functions. * Add the +<<VK_EXT_swapchain_colorspace>>+ extension defining common color spaces.
2017-01-18 04:11:25 +00:00
i_{0} & = \left \lfloor u - \frac{3}{2} \right \rfloor & i_{1} & = i_{0} + 1 & i_{2} & = i_{1} + 1 & i_{3} & = i_{2} + 1 \\[1em]
j_{0} & = \left \lfloor u - \frac{3}{2} \right \rfloor & j_{1} & = j_{0} + 1 & j_{2} & = j_{1} + 1 & j_{3} & = j_{2} + 1 \\
\\
Change log for February 10, 2017 Vulkan 1.0.40 spec update: * Bump API patch number and header version number to 40 for this update. * There is a major build change in this release. We are now using the Ruby-based ``asciidoctor'' implementation, rather than the Python-based ``asciidoc'' implementation, to process the specification. While the actual specification markup changes were minimal, this requires a new set of build tools and a very different installation process, especially because we now use an experimental direct-to-PDF backend for Asciidoctor instead of Docbook->dblatex->PDF. It is no longer possible to build the Specification using asciidoc. See doc/specs/vulkan/README.adoc for some guidance on installing the new toolchain components. * There are some minor rendering issues in the PDF output due to teething problems with the asciidoctor toolchain, especially with mathematical equations. We are aware of these and working on them. Github Issues: * Updated sample code for the <<sparsememory-examples-basic,sparse resource binding example>> (public issue 97). * Modify line and point clipping behavior in the <<vertexpostproc-clipping, Primitive Clipping>> section to allow for pop-free behavior. The ability to check for which behavior is implemented may be added a future feature or extension (public issue 113). * Unify the discussions of implicit ordering throughout the spec, in particular in the new sections <<drawing-primitive-order, Primitive Order>>, <<primrast-order, Rasterization Order>>, and <<synchronization-implicit, Implicit Synchronization Guarantees>>; the discussion of <<synchronization-submission-order, submission order>>; and references elsewhere to these sections (public issue 133). * Clarify \<\<descriptorsets-compatibility,Pipeline Layout Compatibility>> language and introduce the term ``identically defined'' (public issue 164). * Add a dependency to the +VK_EXT_debug_marker+ extension that's needed to reuse the object type enum from +VK_EXT_debug_report+, and moves the definition of that enum into +VK_EXT_debug_report+ where it should be (public issue 409). * Remove redundant valid usage statement from slink:VkImageBlit (public issue 421). * Update GL_KHR_vulkan_glsl to allow the ternary operator to result in a specialization constant (public issue 424). * Fix valid usage for flink:VkPipelineShaderStageCreateInfo (public issue 426). * Correct typo in New Objects list for <<VK_EXT_debug_report>> (public issue 447). Internal Issues: * Moved to asciidoctor for spec builds (internal issue 121). * Update style guide to describe where to put new extensions-specific asciidoc files, and what to name them (internal issue 626). * Add src/spec/indexExt.py to autogenerate registry index entries linking into the 1.0-extensions specification, instead of maintaining the index manually. (internal issue 642). * Autogenerate extension dependencies and lists of all extensions and all KHR extensions from the "supported" attributes in +vk.xml+. Execute +make config/extDependency.sh+ from +doc/specs/vulkan+ when a supported extension is added to vk.xml, to regenerate the dependency script. The consequence is that specifying a single extension to the +makeExt+ script will automatically enable all extensions it depends on as well, and that the +makeAllExts+ and +makeKHR+ scripts do not need to be updated when a new extension is supported (internal issue 648). * Put extension appendices all at the same asciidoc section level, so KHR WSI extensions show up in the HTML index (internal issue 648). Other Issues: * Imbed images in the generated HTML specs instead of loading them from the images/ directory. * Fix missing EXT in extension name (ename:VK_EXT_SWAPCHAIN_COLOR_SPACE_EXTENSION_NAME). * Add new +VK_EXT_SMPTE_2086_metadata+ extension. * In the <<platformCreateSurface_xlib,Xlib Surface>> section of the +VK_KHR_xlib_surface+ specification, add language warning users that they always need to call code:XinitThreads. * Use the term "presentable image" (rather than "swapchain image") consistently in +VK_KHR_swapchain+ and related extensions, and add a glossary term defining it. * Relocate the valid usage for samples of flink:vkGetPhysicalDeviceSparseImageFormatProperties2KHR::pname:pFormatInfo to be below the flink:VkPhysicalDeviceSparseImageFormatInfo2KHR structure.
2017-02-11 04:37:39 +00:00
\alpha & = \mathbin{frac} \left ( u - \frac{1}{2} \right ) \\[1em]
\beta & = \mathbin{frac} \left ( v - \frac{1}{2} \right )
\end{aligned}
Change log for January 23, 2017 Vulkan 1.0.39 spec update: * Bump API patch number and header version number to 39 for this update. Github Issues: * Clarified that only accesses via the specified buffer/image subresource ranges are included in the access scopes (public issue 306). * Add missing valid usage statements for flink:vkCreateComputePipelines and flink:vkCreateGraphicsPipelines (public issue 427). Internal Issues: * Add a Note to the <<invariance,Invariance>> appendix about a difference between OpenGL and Vulkan with regards to how primitives derived from offsets are handled (internal issue 355). * Add the +<<VK_KHR_get_physical_device_properties2>>+, +<<VK_KHR_maintenance1>>+, and +<<VK_KHR_shader_draw_parameters>>+ extensions (internal issue 448). * Add the +<<VK_EXT_shader_subgroup_vote>>+ and +<<VK_EXT_shader_subgroup_ballot>>+ extensions (internal issue 449). * Update the texture level-of-detail equation in the <<textures-scale-factor,Scale Factor Operation>> section to better approximate the ellipse major and minor axes (internal issue 547). * Forbid non-explicitly allowed uses of interface decorations in the introduction to the <<interfaces,Shader Interfaces>> chapter (internal issue 607). * Replace use of MathJax with KaTeX, for improved load-time performance as well as avoiding the scrolling-and-scrolling behavior due to MathJax asynchronous rendering when loading at an anchor inside the spec. This change also requires moving to HTML5 output for the spec instead of XHTML, and there is a visible difference in that the chapter navigation index is now in a scrollable sidebar instead of at the top of the document. We may or may not retain the nav sidebar based on feedback (internal issue 613). * Improve consistency of markup and formatting in extension appendices (internal issue 631). Other Issues: * Add explicit valid usage statements to slink:VkImageCopy requiring that the source and destination layer ranges be contained in their respective source and destination images. * Add valid usage language for swapchain of flink:vkAcquireNextImage. If the swapchain has been replaced, then it should not be passed to flink:vkAcquireNextImage. * Add a valid usage statement to flink:vkCreateImageView, that the image must have been created with an appropriate usage bit set. * Noted that slink:VkDisplayPresentInfoKHR is a valid extension of slink:VkPresentInfoKHR in the <<wsi_swapchain,WSI Swapchain>> section. * Update valid usage for flink:vkCmdSetViewport and flink:vkCmdSetScissor to account for the multiple viewport feature. If the feature is not enabled, the parameters for these functions have required values that are defined in the <<features-features-multiViewport,multiple viewports>> section of the spec but were not reflected in the valid usage text for these functions. * Add the +<<VK_EXT_swapchain_colorspace>>+ extension defining common color spaces.
2017-01-18 04:11:25 +00:00
++++++++++++++++++++++++
== File style/writing.txt
=== latexmath inline 13
Change log for February 10, 2017 Vulkan 1.0.40 spec update: * Bump API patch number and header version number to 40 for this update. * There is a major build change in this release. We are now using the Ruby-based ``asciidoctor'' implementation, rather than the Python-based ``asciidoc'' implementation, to process the specification. While the actual specification markup changes were minimal, this requires a new set of build tools and a very different installation process, especially because we now use an experimental direct-to-PDF backend for Asciidoctor instead of Docbook->dblatex->PDF. It is no longer possible to build the Specification using asciidoc. See doc/specs/vulkan/README.adoc for some guidance on installing the new toolchain components. * There are some minor rendering issues in the PDF output due to teething problems with the asciidoctor toolchain, especially with mathematical equations. We are aware of these and working on them. Github Issues: * Updated sample code for the <<sparsememory-examples-basic,sparse resource binding example>> (public issue 97). * Modify line and point clipping behavior in the <<vertexpostproc-clipping, Primitive Clipping>> section to allow for pop-free behavior. The ability to check for which behavior is implemented may be added a future feature or extension (public issue 113). * Unify the discussions of implicit ordering throughout the spec, in particular in the new sections <<drawing-primitive-order, Primitive Order>>, <<primrast-order, Rasterization Order>>, and <<synchronization-implicit, Implicit Synchronization Guarantees>>; the discussion of <<synchronization-submission-order, submission order>>; and references elsewhere to these sections (public issue 133). * Clarify \<\<descriptorsets-compatibility,Pipeline Layout Compatibility>> language and introduce the term ``identically defined'' (public issue 164). * Add a dependency to the +VK_EXT_debug_marker+ extension that's needed to reuse the object type enum from +VK_EXT_debug_report+, and moves the definition of that enum into +VK_EXT_debug_report+ where it should be (public issue 409). * Remove redundant valid usage statement from slink:VkImageBlit (public issue 421). * Update GL_KHR_vulkan_glsl to allow the ternary operator to result in a specialization constant (public issue 424). * Fix valid usage for flink:VkPipelineShaderStageCreateInfo (public issue 426). * Correct typo in New Objects list for <<VK_EXT_debug_report>> (public issue 447). Internal Issues: * Moved to asciidoctor for spec builds (internal issue 121). * Update style guide to describe where to put new extensions-specific asciidoc files, and what to name them (internal issue 626). * Add src/spec/indexExt.py to autogenerate registry index entries linking into the 1.0-extensions specification, instead of maintaining the index manually. (internal issue 642). * Autogenerate extension dependencies and lists of all extensions and all KHR extensions from the "supported" attributes in +vk.xml+. Execute +make config/extDependency.sh+ from +doc/specs/vulkan+ when a supported extension is added to vk.xml, to regenerate the dependency script. The consequence is that specifying a single extension to the +makeExt+ script will automatically enable all extensions it depends on as well, and that the +makeAllExts+ and +makeKHR+ scripts do not need to be updated when a new extension is supported (internal issue 648). * Put extension appendices all at the same asciidoc section level, so KHR WSI extensions show up in the HTML index (internal issue 648). Other Issues: * Imbed images in the generated HTML specs instead of loading them from the images/ directory. * Fix missing EXT in extension name (ename:VK_EXT_SWAPCHAIN_COLOR_SPACE_EXTENSION_NAME). * Add new +VK_EXT_SMPTE_2086_metadata+ extension. * In the <<platformCreateSurface_xlib,Xlib Surface>> section of the +VK_KHR_xlib_surface+ specification, add language warning users that they always need to call code:XinitThreads. * Use the term "presentable image" (rather than "swapchain image") consistently in +VK_KHR_swapchain+ and related extensions, and add a glossary term defining it. * Relocate the valid usage for samples of flink:vkGetPhysicalDeviceSparseImageFormatProperties2KHR::pname:pFormatInfo to be below the flink:VkPhysicalDeviceSparseImageFormatInfo2KHR structure.
2017-02-11 04:37:39 +00:00
latexmath:[[0,1\]]
Change log for January 23, 2017 Vulkan 1.0.39 spec update: * Bump API patch number and header version number to 39 for this update. Github Issues: * Clarified that only accesses via the specified buffer/image subresource ranges are included in the access scopes (public issue 306). * Add missing valid usage statements for flink:vkCreateComputePipelines and flink:vkCreateGraphicsPipelines (public issue 427). Internal Issues: * Add a Note to the <<invariance,Invariance>> appendix about a difference between OpenGL and Vulkan with regards to how primitives derived from offsets are handled (internal issue 355). * Add the +<<VK_KHR_get_physical_device_properties2>>+, +<<VK_KHR_maintenance1>>+, and +<<VK_KHR_shader_draw_parameters>>+ extensions (internal issue 448). * Add the +<<VK_EXT_shader_subgroup_vote>>+ and +<<VK_EXT_shader_subgroup_ballot>>+ extensions (internal issue 449). * Update the texture level-of-detail equation in the <<textures-scale-factor,Scale Factor Operation>> section to better approximate the ellipse major and minor axes (internal issue 547). * Forbid non-explicitly allowed uses of interface decorations in the introduction to the <<interfaces,Shader Interfaces>> chapter (internal issue 607). * Replace use of MathJax with KaTeX, for improved load-time performance as well as avoiding the scrolling-and-scrolling behavior due to MathJax asynchronous rendering when loading at an anchor inside the spec. This change also requires moving to HTML5 output for the spec instead of XHTML, and there is a visible difference in that the chapter navigation index is now in a scrollable sidebar instead of at the top of the document. We may or may not retain the nav sidebar based on feedback (internal issue 613). * Improve consistency of markup and formatting in extension appendices (internal issue 631). Other Issues: * Add explicit valid usage statements to slink:VkImageCopy requiring that the source and destination layer ranges be contained in their respective source and destination images. * Add valid usage language for swapchain of flink:vkAcquireNextImage. If the swapchain has been replaced, then it should not be passed to flink:vkAcquireNextImage. * Add a valid usage statement to flink:vkCreateImageView, that the image must have been created with an appropriate usage bit set. * Noted that slink:VkDisplayPresentInfoKHR is a valid extension of slink:VkPresentInfoKHR in the <<wsi_swapchain,WSI Swapchain>> section. * Update valid usage for flink:vkCmdSetViewport and flink:vkCmdSetScissor to account for the multiple viewport feature. If the feature is not enabled, the parameters for these functions have required values that are defined in the <<features-features-multiViewport,multiple viewports>> section of the spec but were not reflected in the valid usage text for these functions. * Add the +<<VK_EXT_swapchain_colorspace>>+ extension defining common color spaces.
2017-01-18 04:11:25 +00:00
=== latexmath inline 14
Change log for February 10, 2017 Vulkan 1.0.40 spec update: * Bump API patch number and header version number to 40 for this update. * There is a major build change in this release. We are now using the Ruby-based ``asciidoctor'' implementation, rather than the Python-based ``asciidoc'' implementation, to process the specification. While the actual specification markup changes were minimal, this requires a new set of build tools and a very different installation process, especially because we now use an experimental direct-to-PDF backend for Asciidoctor instead of Docbook->dblatex->PDF. It is no longer possible to build the Specification using asciidoc. See doc/specs/vulkan/README.adoc for some guidance on installing the new toolchain components. * There are some minor rendering issues in the PDF output due to teething problems with the asciidoctor toolchain, especially with mathematical equations. We are aware of these and working on them. Github Issues: * Updated sample code for the <<sparsememory-examples-basic,sparse resource binding example>> (public issue 97). * Modify line and point clipping behavior in the <<vertexpostproc-clipping, Primitive Clipping>> section to allow for pop-free behavior. The ability to check for which behavior is implemented may be added a future feature or extension (public issue 113). * Unify the discussions of implicit ordering throughout the spec, in particular in the new sections <<drawing-primitive-order, Primitive Order>>, <<primrast-order, Rasterization Order>>, and <<synchronization-implicit, Implicit Synchronization Guarantees>>; the discussion of <<synchronization-submission-order, submission order>>; and references elsewhere to these sections (public issue 133). * Clarify \<\<descriptorsets-compatibility,Pipeline Layout Compatibility>> language and introduce the term ``identically defined'' (public issue 164). * Add a dependency to the +VK_EXT_debug_marker+ extension that's needed to reuse the object type enum from +VK_EXT_debug_report+, and moves the definition of that enum into +VK_EXT_debug_report+ where it should be (public issue 409). * Remove redundant valid usage statement from slink:VkImageBlit (public issue 421). * Update GL_KHR_vulkan_glsl to allow the ternary operator to result in a specialization constant (public issue 424). * Fix valid usage for flink:VkPipelineShaderStageCreateInfo (public issue 426). * Correct typo in New Objects list for <<VK_EXT_debug_report>> (public issue 447). Internal Issues: * Moved to asciidoctor for spec builds (internal issue 121). * Update style guide to describe where to put new extensions-specific asciidoc files, and what to name them (internal issue 626). * Add src/spec/indexExt.py to autogenerate registry index entries linking into the 1.0-extensions specification, instead of maintaining the index manually. (internal issue 642). * Autogenerate extension dependencies and lists of all extensions and all KHR extensions from the "supported" attributes in +vk.xml+. Execute +make config/extDependency.sh+ from +doc/specs/vulkan+ when a supported extension is added to vk.xml, to regenerate the dependency script. The consequence is that specifying a single extension to the +makeExt+ script will automatically enable all extensions it depends on as well, and that the +makeAllExts+ and +makeKHR+ scripts do not need to be updated when a new extension is supported (internal issue 648). * Put extension appendices all at the same asciidoc section level, so KHR WSI extensions show up in the HTML index (internal issue 648). Other Issues: * Imbed images in the generated HTML specs instead of loading them from the images/ directory. * Fix missing EXT in extension name (ename:VK_EXT_SWAPCHAIN_COLOR_SPACE_EXTENSION_NAME). * Add new +VK_EXT_SMPTE_2086_metadata+ extension. * In the <<platformCreateSurface_xlib,Xlib Surface>> section of the +VK_KHR_xlib_surface+ specification, add language warning users that they always need to call code:XinitThreads. * Use the term "presentable image" (rather than "swapchain image") consistently in +VK_KHR_swapchain+ and related extensions, and add a glossary term defining it. * Relocate the valid usage for samples of flink:vkGetPhysicalDeviceSparseImageFormatProperties2KHR::pname:pFormatInfo to be below the flink:VkPhysicalDeviceSparseImageFormatInfo2KHR structure.
2017-02-11 04:37:39 +00:00
latexmath:[\frac{1 - \frac{x}{2}}{x - 1}]
Change log for January 23, 2017 Vulkan 1.0.39 spec update: * Bump API patch number and header version number to 39 for this update. Github Issues: * Clarified that only accesses via the specified buffer/image subresource ranges are included in the access scopes (public issue 306). * Add missing valid usage statements for flink:vkCreateComputePipelines and flink:vkCreateGraphicsPipelines (public issue 427). Internal Issues: * Add a Note to the <<invariance,Invariance>> appendix about a difference between OpenGL and Vulkan with regards to how primitives derived from offsets are handled (internal issue 355). * Add the +<<VK_KHR_get_physical_device_properties2>>+, +<<VK_KHR_maintenance1>>+, and +<<VK_KHR_shader_draw_parameters>>+ extensions (internal issue 448). * Add the +<<VK_EXT_shader_subgroup_vote>>+ and +<<VK_EXT_shader_subgroup_ballot>>+ extensions (internal issue 449). * Update the texture level-of-detail equation in the <<textures-scale-factor,Scale Factor Operation>> section to better approximate the ellipse major and minor axes (internal issue 547). * Forbid non-explicitly allowed uses of interface decorations in the introduction to the <<interfaces,Shader Interfaces>> chapter (internal issue 607). * Replace use of MathJax with KaTeX, for improved load-time performance as well as avoiding the scrolling-and-scrolling behavior due to MathJax asynchronous rendering when loading at an anchor inside the spec. This change also requires moving to HTML5 output for the spec instead of XHTML, and there is a visible difference in that the chapter navigation index is now in a scrollable sidebar instead of at the top of the document. We may or may not retain the nav sidebar based on feedback (internal issue 613). * Improve consistency of markup and formatting in extension appendices (internal issue 631). Other Issues: * Add explicit valid usage statements to slink:VkImageCopy requiring that the source and destination layer ranges be contained in their respective source and destination images. * Add valid usage language for swapchain of flink:vkAcquireNextImage. If the swapchain has been replaced, then it should not be passed to flink:vkAcquireNextImage. * Add a valid usage statement to flink:vkCreateImageView, that the image must have been created with an appropriate usage bit set. * Noted that slink:VkDisplayPresentInfoKHR is a valid extension of slink:VkPresentInfoKHR in the <<wsi_swapchain,WSI Swapchain>> section. * Update valid usage for flink:vkCmdSetViewport and flink:vkCmdSetScissor to account for the multiple viewport feature. If the feature is not enabled, the parameters for these functions have required values that are defined in the <<features-features-multiViewport,multiple viewports>> section of the spec but were not reflected in the valid usage text for these functions. * Add the +<<VK_EXT_swapchain_colorspace>>+ extension defining common color spaces.
2017-01-18 04:11:25 +00:00
=== latexmath inline 15
Change log for February 10, 2017 Vulkan 1.0.40 spec update: * Bump API patch number and header version number to 40 for this update. * There is a major build change in this release. We are now using the Ruby-based ``asciidoctor'' implementation, rather than the Python-based ``asciidoc'' implementation, to process the specification. While the actual specification markup changes were minimal, this requires a new set of build tools and a very different installation process, especially because we now use an experimental direct-to-PDF backend for Asciidoctor instead of Docbook->dblatex->PDF. It is no longer possible to build the Specification using asciidoc. See doc/specs/vulkan/README.adoc for some guidance on installing the new toolchain components. * There are some minor rendering issues in the PDF output due to teething problems with the asciidoctor toolchain, especially with mathematical equations. We are aware of these and working on them. Github Issues: * Updated sample code for the <<sparsememory-examples-basic,sparse resource binding example>> (public issue 97). * Modify line and point clipping behavior in the <<vertexpostproc-clipping, Primitive Clipping>> section to allow for pop-free behavior. The ability to check for which behavior is implemented may be added a future feature or extension (public issue 113). * Unify the discussions of implicit ordering throughout the spec, in particular in the new sections <<drawing-primitive-order, Primitive Order>>, <<primrast-order, Rasterization Order>>, and <<synchronization-implicit, Implicit Synchronization Guarantees>>; the discussion of <<synchronization-submission-order, submission order>>; and references elsewhere to these sections (public issue 133). * Clarify \<\<descriptorsets-compatibility,Pipeline Layout Compatibility>> language and introduce the term ``identically defined'' (public issue 164). * Add a dependency to the +VK_EXT_debug_marker+ extension that's needed to reuse the object type enum from +VK_EXT_debug_report+, and moves the definition of that enum into +VK_EXT_debug_report+ where it should be (public issue 409). * Remove redundant valid usage statement from slink:VkImageBlit (public issue 421). * Update GL_KHR_vulkan_glsl to allow the ternary operator to result in a specialization constant (public issue 424). * Fix valid usage for flink:VkPipelineShaderStageCreateInfo (public issue 426). * Correct typo in New Objects list for <<VK_EXT_debug_report>> (public issue 447). Internal Issues: * Moved to asciidoctor for spec builds (internal issue 121). * Update style guide to describe where to put new extensions-specific asciidoc files, and what to name them (internal issue 626). * Add src/spec/indexExt.py to autogenerate registry index entries linking into the 1.0-extensions specification, instead of maintaining the index manually. (internal issue 642). * Autogenerate extension dependencies and lists of all extensions and all KHR extensions from the "supported" attributes in +vk.xml+. Execute +make config/extDependency.sh+ from +doc/specs/vulkan+ when a supported extension is added to vk.xml, to regenerate the dependency script. The consequence is that specifying a single extension to the +makeExt+ script will automatically enable all extensions it depends on as well, and that the +makeAllExts+ and +makeKHR+ scripts do not need to be updated when a new extension is supported (internal issue 648). * Put extension appendices all at the same asciidoc section level, so KHR WSI extensions show up in the HTML index (internal issue 648). Other Issues: * Imbed images in the generated HTML specs instead of loading them from the images/ directory. * Fix missing EXT in extension name (ename:VK_EXT_SWAPCHAIN_COLOR_SPACE_EXTENSION_NAME). * Add new +VK_EXT_SMPTE_2086_metadata+ extension. * In the <<platformCreateSurface_xlib,Xlib Surface>> section of the +VK_KHR_xlib_surface+ specification, add language warning users that they always need to call code:XinitThreads. * Use the term "presentable image" (rather than "swapchain image") consistently in +VK_KHR_swapchain+ and related extensions, and add a glossary term defining it. * Relocate the valid usage for samples of flink:vkGetPhysicalDeviceSparseImageFormatProperties2KHR::pname:pFormatInfo to be below the flink:VkPhysicalDeviceSparseImageFormatInfo2KHR structure.
2017-02-11 04:37:39 +00:00
latexmath:[\mathbf{c} = t \mathbf{c}_1 + (1-t) \mathbf{c}_2.]
Change log for January 23, 2017 Vulkan 1.0.39 spec update: * Bump API patch number and header version number to 39 for this update. Github Issues: * Clarified that only accesses via the specified buffer/image subresource ranges are included in the access scopes (public issue 306). * Add missing valid usage statements for flink:vkCreateComputePipelines and flink:vkCreateGraphicsPipelines (public issue 427). Internal Issues: * Add a Note to the <<invariance,Invariance>> appendix about a difference between OpenGL and Vulkan with regards to how primitives derived from offsets are handled (internal issue 355). * Add the +<<VK_KHR_get_physical_device_properties2>>+, +<<VK_KHR_maintenance1>>+, and +<<VK_KHR_shader_draw_parameters>>+ extensions (internal issue 448). * Add the +<<VK_EXT_shader_subgroup_vote>>+ and +<<VK_EXT_shader_subgroup_ballot>>+ extensions (internal issue 449). * Update the texture level-of-detail equation in the <<textures-scale-factor,Scale Factor Operation>> section to better approximate the ellipse major and minor axes (internal issue 547). * Forbid non-explicitly allowed uses of interface decorations in the introduction to the <<interfaces,Shader Interfaces>> chapter (internal issue 607). * Replace use of MathJax with KaTeX, for improved load-time performance as well as avoiding the scrolling-and-scrolling behavior due to MathJax asynchronous rendering when loading at an anchor inside the spec. This change also requires moving to HTML5 output for the spec instead of XHTML, and there is a visible difference in that the chapter navigation index is now in a scrollable sidebar instead of at the top of the document. We may or may not retain the nav sidebar based on feedback (internal issue 613). * Improve consistency of markup and formatting in extension appendices (internal issue 631). Other Issues: * Add explicit valid usage statements to slink:VkImageCopy requiring that the source and destination layer ranges be contained in their respective source and destination images. * Add valid usage language for swapchain of flink:vkAcquireNextImage. If the swapchain has been replaced, then it should not be passed to flink:vkAcquireNextImage. * Add a valid usage statement to flink:vkCreateImageView, that the image must have been created with an appropriate usage bit set. * Noted that slink:VkDisplayPresentInfoKHR is a valid extension of slink:VkPresentInfoKHR in the <<wsi_swapchain,WSI Swapchain>> section. * Update valid usage for flink:vkCmdSetViewport and flink:vkCmdSetScissor to account for the multiple viewport feature. If the feature is not enabled, the parameters for these functions have required values that are defined in the <<features-features-multiViewport,multiple viewports>> section of the spec but were not reflected in the valid usage text for these functions. * Add the +<<VK_EXT_swapchain_colorspace>>+ extension defining common color spaces.
2017-01-18 04:11:25 +00:00
Change log for February 10, 2017 Vulkan 1.0.40 spec update: * Bump API patch number and header version number to 40 for this update. * There is a major build change in this release. We are now using the Ruby-based ``asciidoctor'' implementation, rather than the Python-based ``asciidoc'' implementation, to process the specification. While the actual specification markup changes were minimal, this requires a new set of build tools and a very different installation process, especially because we now use an experimental direct-to-PDF backend for Asciidoctor instead of Docbook->dblatex->PDF. It is no longer possible to build the Specification using asciidoc. See doc/specs/vulkan/README.adoc for some guidance on installing the new toolchain components. * There are some minor rendering issues in the PDF output due to teething problems with the asciidoctor toolchain, especially with mathematical equations. We are aware of these and working on them. Github Issues: * Updated sample code for the <<sparsememory-examples-basic,sparse resource binding example>> (public issue 97). * Modify line and point clipping behavior in the <<vertexpostproc-clipping, Primitive Clipping>> section to allow for pop-free behavior. The ability to check for which behavior is implemented may be added a future feature or extension (public issue 113). * Unify the discussions of implicit ordering throughout the spec, in particular in the new sections <<drawing-primitive-order, Primitive Order>>, <<primrast-order, Rasterization Order>>, and <<synchronization-implicit, Implicit Synchronization Guarantees>>; the discussion of <<synchronization-submission-order, submission order>>; and references elsewhere to these sections (public issue 133). * Clarify \<\<descriptorsets-compatibility,Pipeline Layout Compatibility>> language and introduce the term ``identically defined'' (public issue 164). * Add a dependency to the +VK_EXT_debug_marker+ extension that's needed to reuse the object type enum from +VK_EXT_debug_report+, and moves the definition of that enum into +VK_EXT_debug_report+ where it should be (public issue 409). * Remove redundant valid usage statement from slink:VkImageBlit (public issue 421). * Update GL_KHR_vulkan_glsl to allow the ternary operator to result in a specialization constant (public issue 424). * Fix valid usage for flink:VkPipelineShaderStageCreateInfo (public issue 426). * Correct typo in New Objects list for <<VK_EXT_debug_report>> (public issue 447). Internal Issues: * Moved to asciidoctor for spec builds (internal issue 121). * Update style guide to describe where to put new extensions-specific asciidoc files, and what to name them (internal issue 626). * Add src/spec/indexExt.py to autogenerate registry index entries linking into the 1.0-extensions specification, instead of maintaining the index manually. (internal issue 642). * Autogenerate extension dependencies and lists of all extensions and all KHR extensions from the "supported" attributes in +vk.xml+. Execute +make config/extDependency.sh+ from +doc/specs/vulkan+ when a supported extension is added to vk.xml, to regenerate the dependency script. The consequence is that specifying a single extension to the +makeExt+ script will automatically enable all extensions it depends on as well, and that the +makeAllExts+ and +makeKHR+ scripts do not need to be updated when a new extension is supported (internal issue 648). * Put extension appendices all at the same asciidoc section level, so KHR WSI extensions show up in the HTML index (internal issue 648). Other Issues: * Imbed images in the generated HTML specs instead of loading them from the images/ directory. * Fix missing EXT in extension name (ename:VK_EXT_SWAPCHAIN_COLOR_SPACE_EXTENSION_NAME). * Add new +VK_EXT_SMPTE_2086_metadata+ extension. * In the <<platformCreateSurface_xlib,Xlib Surface>> section of the +VK_KHR_xlib_surface+ specification, add language warning users that they always need to call code:XinitThreads. * Use the term "presentable image" (rather than "swapchain image") consistently in +VK_KHR_swapchain+ and related extensions, and add a glossary term defining it. * Relocate the valid usage for samples of flink:vkGetPhysicalDeviceSparseImageFormatProperties2KHR::pname:pFormatInfo to be below the flink:VkPhysicalDeviceSparseImageFormatInfo2KHR structure.
2017-02-11 04:37:39 +00:00
=== latexmath block 63
Change log for January 23, 2017 Vulkan 1.0.39 spec update: * Bump API patch number and header version number to 39 for this update. Github Issues: * Clarified that only accesses via the specified buffer/image subresource ranges are included in the access scopes (public issue 306). * Add missing valid usage statements for flink:vkCreateComputePipelines and flink:vkCreateGraphicsPipelines (public issue 427). Internal Issues: * Add a Note to the <<invariance,Invariance>> appendix about a difference between OpenGL and Vulkan with regards to how primitives derived from offsets are handled (internal issue 355). * Add the +<<VK_KHR_get_physical_device_properties2>>+, +<<VK_KHR_maintenance1>>+, and +<<VK_KHR_shader_draw_parameters>>+ extensions (internal issue 448). * Add the +<<VK_EXT_shader_subgroup_vote>>+ and +<<VK_EXT_shader_subgroup_ballot>>+ extensions (internal issue 449). * Update the texture level-of-detail equation in the <<textures-scale-factor,Scale Factor Operation>> section to better approximate the ellipse major and minor axes (internal issue 547). * Forbid non-explicitly allowed uses of interface decorations in the introduction to the <<interfaces,Shader Interfaces>> chapter (internal issue 607). * Replace use of MathJax with KaTeX, for improved load-time performance as well as avoiding the scrolling-and-scrolling behavior due to MathJax asynchronous rendering when loading at an anchor inside the spec. This change also requires moving to HTML5 output for the spec instead of XHTML, and there is a visible difference in that the chapter navigation index is now in a scrollable sidebar instead of at the top of the document. We may or may not retain the nav sidebar based on feedback (internal issue 613). * Improve consistency of markup and formatting in extension appendices (internal issue 631). Other Issues: * Add explicit valid usage statements to slink:VkImageCopy requiring that the source and destination layer ranges be contained in their respective source and destination images. * Add valid usage language for swapchain of flink:vkAcquireNextImage. If the swapchain has been replaced, then it should not be passed to flink:vkAcquireNextImage. * Add a valid usage statement to flink:vkCreateImageView, that the image must have been created with an appropriate usage bit set. * Noted that slink:VkDisplayPresentInfoKHR is a valid extension of slink:VkPresentInfoKHR in the <<wsi_swapchain,WSI Swapchain>> section. * Update valid usage for flink:vkCmdSetViewport and flink:vkCmdSetScissor to account for the multiple viewport feature. If the feature is not enabled, the parameters for these functions have required values that are defined in the <<features-features-multiViewport,multiple viewports>> section of the spec but were not reflected in the valid usage text for these functions. * Add the +<<VK_EXT_swapchain_colorspace>>+ extension defining common color spaces.
2017-01-18 04:11:25 +00:00
[latexmath]
+++++++++++++++++++
Change log for February 10, 2017 Vulkan 1.0.40 spec update: * Bump API patch number and header version number to 40 for this update. * There is a major build change in this release. We are now using the Ruby-based ``asciidoctor'' implementation, rather than the Python-based ``asciidoc'' implementation, to process the specification. While the actual specification markup changes were minimal, this requires a new set of build tools and a very different installation process, especially because we now use an experimental direct-to-PDF backend for Asciidoctor instead of Docbook->dblatex->PDF. It is no longer possible to build the Specification using asciidoc. See doc/specs/vulkan/README.adoc for some guidance on installing the new toolchain components. * There are some minor rendering issues in the PDF output due to teething problems with the asciidoctor toolchain, especially with mathematical equations. We are aware of these and working on them. Github Issues: * Updated sample code for the <<sparsememory-examples-basic,sparse resource binding example>> (public issue 97). * Modify line and point clipping behavior in the <<vertexpostproc-clipping, Primitive Clipping>> section to allow for pop-free behavior. The ability to check for which behavior is implemented may be added a future feature or extension (public issue 113). * Unify the discussions of implicit ordering throughout the spec, in particular in the new sections <<drawing-primitive-order, Primitive Order>>, <<primrast-order, Rasterization Order>>, and <<synchronization-implicit, Implicit Synchronization Guarantees>>; the discussion of <<synchronization-submission-order, submission order>>; and references elsewhere to these sections (public issue 133). * Clarify \<\<descriptorsets-compatibility,Pipeline Layout Compatibility>> language and introduce the term ``identically defined'' (public issue 164). * Add a dependency to the +VK_EXT_debug_marker+ extension that's needed to reuse the object type enum from +VK_EXT_debug_report+, and moves the definition of that enum into +VK_EXT_debug_report+ where it should be (public issue 409). * Remove redundant valid usage statement from slink:VkImageBlit (public issue 421). * Update GL_KHR_vulkan_glsl to allow the ternary operator to result in a specialization constant (public issue 424). * Fix valid usage for flink:VkPipelineShaderStageCreateInfo (public issue 426). * Correct typo in New Objects list for <<VK_EXT_debug_report>> (public issue 447). Internal Issues: * Moved to asciidoctor for spec builds (internal issue 121). * Update style guide to describe where to put new extensions-specific asciidoc files, and what to name them (internal issue 626). * Add src/spec/indexExt.py to autogenerate registry index entries linking into the 1.0-extensions specification, instead of maintaining the index manually. (internal issue 642). * Autogenerate extension dependencies and lists of all extensions and all KHR extensions from the "supported" attributes in +vk.xml+. Execute +make config/extDependency.sh+ from +doc/specs/vulkan+ when a supported extension is added to vk.xml, to regenerate the dependency script. The consequence is that specifying a single extension to the +makeExt+ script will automatically enable all extensions it depends on as well, and that the +makeAllExts+ and +makeKHR+ scripts do not need to be updated when a new extension is supported (internal issue 648). * Put extension appendices all at the same asciidoc section level, so KHR WSI extensions show up in the HTML index (internal issue 648). Other Issues: * Imbed images in the generated HTML specs instead of loading them from the images/ directory. * Fix missing EXT in extension name (ename:VK_EXT_SWAPCHAIN_COLOR_SPACE_EXTENSION_NAME). * Add new +VK_EXT_SMPTE_2086_metadata+ extension. * In the <<platformCreateSurface_xlib,Xlib Surface>> section of the +VK_KHR_xlib_surface+ specification, add language warning users that they always need to call code:XinitThreads. * Use the term "presentable image" (rather than "swapchain image") consistently in +VK_KHR_swapchain+ and related extensions, and add a glossary term defining it. * Relocate the valid usage for samples of flink:vkGetPhysicalDeviceSparseImageFormatProperties2KHR::pname:pFormatInfo to be below the flink:VkPhysicalDeviceSparseImageFormatInfo2KHR structure.
2017-02-11 04:37:39 +00:00
\begin{aligned}
Change log for January 23, 2017 Vulkan 1.0.39 spec update: * Bump API patch number and header version number to 39 for this update. Github Issues: * Clarified that only accesses via the specified buffer/image subresource ranges are included in the access scopes (public issue 306). * Add missing valid usage statements for flink:vkCreateComputePipelines and flink:vkCreateGraphicsPipelines (public issue 427). Internal Issues: * Add a Note to the <<invariance,Invariance>> appendix about a difference between OpenGL and Vulkan with regards to how primitives derived from offsets are handled (internal issue 355). * Add the +<<VK_KHR_get_physical_device_properties2>>+, +<<VK_KHR_maintenance1>>+, and +<<VK_KHR_shader_draw_parameters>>+ extensions (internal issue 448). * Add the +<<VK_EXT_shader_subgroup_vote>>+ and +<<VK_EXT_shader_subgroup_ballot>>+ extensions (internal issue 449). * Update the texture level-of-detail equation in the <<textures-scale-factor,Scale Factor Operation>> section to better approximate the ellipse major and minor axes (internal issue 547). * Forbid non-explicitly allowed uses of interface decorations in the introduction to the <<interfaces,Shader Interfaces>> chapter (internal issue 607). * Replace use of MathJax with KaTeX, for improved load-time performance as well as avoiding the scrolling-and-scrolling behavior due to MathJax asynchronous rendering when loading at an anchor inside the spec. This change also requires moving to HTML5 output for the spec instead of XHTML, and there is a visible difference in that the chapter navigation index is now in a scrollable sidebar instead of at the top of the document. We may or may not retain the nav sidebar based on feedback (internal issue 613). * Improve consistency of markup and formatting in extension appendices (internal issue 631). Other Issues: * Add explicit valid usage statements to slink:VkImageCopy requiring that the source and destination layer ranges be contained in their respective source and destination images. * Add valid usage language for swapchain of flink:vkAcquireNextImage. If the swapchain has been replaced, then it should not be passed to flink:vkAcquireNextImage. * Add a valid usage statement to flink:vkCreateImageView, that the image must have been created with an appropriate usage bit set. * Noted that slink:VkDisplayPresentInfoKHR is a valid extension of slink:VkPresentInfoKHR in the <<wsi_swapchain,WSI Swapchain>> section. * Update valid usage for flink:vkCmdSetViewport and flink:vkCmdSetScissor to account for the multiple viewport feature. If the feature is not enabled, the parameters for these functions have required values that are defined in the <<features-features-multiViewport,multiple viewports>> section of the spec but were not reflected in the valid usage text for these functions. * Add the +<<VK_EXT_swapchain_colorspace>>+ extension defining common color spaces.
2017-01-18 04:11:25 +00:00
c_{RGB} & =
\begin{cases}
Change log for February 10, 2017 Vulkan 1.0.40 spec update: * Bump API patch number and header version number to 40 for this update. * There is a major build change in this release. We are now using the Ruby-based ``asciidoctor'' implementation, rather than the Python-based ``asciidoc'' implementation, to process the specification. While the actual specification markup changes were minimal, this requires a new set of build tools and a very different installation process, especially because we now use an experimental direct-to-PDF backend for Asciidoctor instead of Docbook->dblatex->PDF. It is no longer possible to build the Specification using asciidoc. See doc/specs/vulkan/README.adoc for some guidance on installing the new toolchain components. * There are some minor rendering issues in the PDF output due to teething problems with the asciidoctor toolchain, especially with mathematical equations. We are aware of these and working on them. Github Issues: * Updated sample code for the <<sparsememory-examples-basic,sparse resource binding example>> (public issue 97). * Modify line and point clipping behavior in the <<vertexpostproc-clipping, Primitive Clipping>> section to allow for pop-free behavior. The ability to check for which behavior is implemented may be added a future feature or extension (public issue 113). * Unify the discussions of implicit ordering throughout the spec, in particular in the new sections <<drawing-primitive-order, Primitive Order>>, <<primrast-order, Rasterization Order>>, and <<synchronization-implicit, Implicit Synchronization Guarantees>>; the discussion of <<synchronization-submission-order, submission order>>; and references elsewhere to these sections (public issue 133). * Clarify \<\<descriptorsets-compatibility,Pipeline Layout Compatibility>> language and introduce the term ``identically defined'' (public issue 164). * Add a dependency to the +VK_EXT_debug_marker+ extension that's needed to reuse the object type enum from +VK_EXT_debug_report+, and moves the definition of that enum into +VK_EXT_debug_report+ where it should be (public issue 409). * Remove redundant valid usage statement from slink:VkImageBlit (public issue 421). * Update GL_KHR_vulkan_glsl to allow the ternary operator to result in a specialization constant (public issue 424). * Fix valid usage for flink:VkPipelineShaderStageCreateInfo (public issue 426). * Correct typo in New Objects list for <<VK_EXT_debug_report>> (public issue 447). Internal Issues: * Moved to asciidoctor for spec builds (internal issue 121). * Update style guide to describe where to put new extensions-specific asciidoc files, and what to name them (internal issue 626). * Add src/spec/indexExt.py to autogenerate registry index entries linking into the 1.0-extensions specification, instead of maintaining the index manually. (internal issue 642). * Autogenerate extension dependencies and lists of all extensions and all KHR extensions from the "supported" attributes in +vk.xml+. Execute +make config/extDependency.sh+ from +doc/specs/vulkan+ when a supported extension is added to vk.xml, to regenerate the dependency script. The consequence is that specifying a single extension to the +makeExt+ script will automatically enable all extensions it depends on as well, and that the +makeAllExts+ and +makeKHR+ scripts do not need to be updated when a new extension is supported (internal issue 648). * Put extension appendices all at the same asciidoc section level, so KHR WSI extensions show up in the HTML index (internal issue 648). Other Issues: * Imbed images in the generated HTML specs instead of loading them from the images/ directory. * Fix missing EXT in extension name (ename:VK_EXT_SWAPCHAIN_COLOR_SPACE_EXTENSION_NAME). * Add new +VK_EXT_SMPTE_2086_metadata+ extension. * In the <<platformCreateSurface_xlib,Xlib Surface>> section of the +VK_KHR_xlib_surface+ specification, add language warning users that they always need to call code:XinitThreads. * Use the term "presentable image" (rather than "swapchain image") consistently in +VK_KHR_swapchain+ and related extensions, and add a glossary term defining it. * Relocate the valid usage for samples of flink:vkGetPhysicalDeviceSparseImageFormatProperties2KHR::pname:pFormatInfo to be below the flink:VkPhysicalDeviceSparseImageFormatInfo2KHR structure.
2017-02-11 04:37:39 +00:00
\frac{c_{sRGB}}{12.92} & \text{for}\ c_{sRGB} \leq 0.04045 \\
\left ( \frac{c_{sRGB}+0.055}{1.055} \right )^{2.4} & \text{for}\ c_{sRGB} > 0.04045
Change log for January 23, 2017 Vulkan 1.0.39 spec update: * Bump API patch number and header version number to 39 for this update. Github Issues: * Clarified that only accesses via the specified buffer/image subresource ranges are included in the access scopes (public issue 306). * Add missing valid usage statements for flink:vkCreateComputePipelines and flink:vkCreateGraphicsPipelines (public issue 427). Internal Issues: * Add a Note to the <<invariance,Invariance>> appendix about a difference between OpenGL and Vulkan with regards to how primitives derived from offsets are handled (internal issue 355). * Add the +<<VK_KHR_get_physical_device_properties2>>+, +<<VK_KHR_maintenance1>>+, and +<<VK_KHR_shader_draw_parameters>>+ extensions (internal issue 448). * Add the +<<VK_EXT_shader_subgroup_vote>>+ and +<<VK_EXT_shader_subgroup_ballot>>+ extensions (internal issue 449). * Update the texture level-of-detail equation in the <<textures-scale-factor,Scale Factor Operation>> section to better approximate the ellipse major and minor axes (internal issue 547). * Forbid non-explicitly allowed uses of interface decorations in the introduction to the <<interfaces,Shader Interfaces>> chapter (internal issue 607). * Replace use of MathJax with KaTeX, for improved load-time performance as well as avoiding the scrolling-and-scrolling behavior due to MathJax asynchronous rendering when loading at an anchor inside the spec. This change also requires moving to HTML5 output for the spec instead of XHTML, and there is a visible difference in that the chapter navigation index is now in a scrollable sidebar instead of at the top of the document. We may or may not retain the nav sidebar based on feedback (internal issue 613). * Improve consistency of markup and formatting in extension appendices (internal issue 631). Other Issues: * Add explicit valid usage statements to slink:VkImageCopy requiring that the source and destination layer ranges be contained in their respective source and destination images. * Add valid usage language for swapchain of flink:vkAcquireNextImage. If the swapchain has been replaced, then it should not be passed to flink:vkAcquireNextImage. * Add a valid usage statement to flink:vkCreateImageView, that the image must have been created with an appropriate usage bit set. * Noted that slink:VkDisplayPresentInfoKHR is a valid extension of slink:VkPresentInfoKHR in the <<wsi_swapchain,WSI Swapchain>> section. * Update valid usage for flink:vkCmdSetViewport and flink:vkCmdSetScissor to account for the multiple viewport feature. If the feature is not enabled, the parameters for these functions have required values that are defined in the <<features-features-multiViewport,multiple viewports>> section of the spec but were not reflected in the valid usage text for these functions. * Add the +<<VK_EXT_swapchain_colorspace>>+ extension defining common color spaces.
2017-01-18 04:11:25 +00:00
\end{cases}
Change log for February 10, 2017 Vulkan 1.0.40 spec update: * Bump API patch number and header version number to 40 for this update. * There is a major build change in this release. We are now using the Ruby-based ``asciidoctor'' implementation, rather than the Python-based ``asciidoc'' implementation, to process the specification. While the actual specification markup changes were minimal, this requires a new set of build tools and a very different installation process, especially because we now use an experimental direct-to-PDF backend for Asciidoctor instead of Docbook->dblatex->PDF. It is no longer possible to build the Specification using asciidoc. See doc/specs/vulkan/README.adoc for some guidance on installing the new toolchain components. * There are some minor rendering issues in the PDF output due to teething problems with the asciidoctor toolchain, especially with mathematical equations. We are aware of these and working on them. Github Issues: * Updated sample code for the <<sparsememory-examples-basic,sparse resource binding example>> (public issue 97). * Modify line and point clipping behavior in the <<vertexpostproc-clipping, Primitive Clipping>> section to allow for pop-free behavior. The ability to check for which behavior is implemented may be added a future feature or extension (public issue 113). * Unify the discussions of implicit ordering throughout the spec, in particular in the new sections <<drawing-primitive-order, Primitive Order>>, <<primrast-order, Rasterization Order>>, and <<synchronization-implicit, Implicit Synchronization Guarantees>>; the discussion of <<synchronization-submission-order, submission order>>; and references elsewhere to these sections (public issue 133). * Clarify \<\<descriptorsets-compatibility,Pipeline Layout Compatibility>> language and introduce the term ``identically defined'' (public issue 164). * Add a dependency to the +VK_EXT_debug_marker+ extension that's needed to reuse the object type enum from +VK_EXT_debug_report+, and moves the definition of that enum into +VK_EXT_debug_report+ where it should be (public issue 409). * Remove redundant valid usage statement from slink:VkImageBlit (public issue 421). * Update GL_KHR_vulkan_glsl to allow the ternary operator to result in a specialization constant (public issue 424). * Fix valid usage for flink:VkPipelineShaderStageCreateInfo (public issue 426). * Correct typo in New Objects list for <<VK_EXT_debug_report>> (public issue 447). Internal Issues: * Moved to asciidoctor for spec builds (internal issue 121). * Update style guide to describe where to put new extensions-specific asciidoc files, and what to name them (internal issue 626). * Add src/spec/indexExt.py to autogenerate registry index entries linking into the 1.0-extensions specification, instead of maintaining the index manually. (internal issue 642). * Autogenerate extension dependencies and lists of all extensions and all KHR extensions from the "supported" attributes in +vk.xml+. Execute +make config/extDependency.sh+ from +doc/specs/vulkan+ when a supported extension is added to vk.xml, to regenerate the dependency script. The consequence is that specifying a single extension to the +makeExt+ script will automatically enable all extensions it depends on as well, and that the +makeAllExts+ and +makeKHR+ scripts do not need to be updated when a new extension is supported (internal issue 648). * Put extension appendices all at the same asciidoc section level, so KHR WSI extensions show up in the HTML index (internal issue 648). Other Issues: * Imbed images in the generated HTML specs instead of loading them from the images/ directory. * Fix missing EXT in extension name (ename:VK_EXT_SWAPCHAIN_COLOR_SPACE_EXTENSION_NAME). * Add new +VK_EXT_SMPTE_2086_metadata+ extension. * In the <<platformCreateSurface_xlib,Xlib Surface>> section of the +VK_KHR_xlib_surface+ specification, add language warning users that they always need to call code:XinitThreads. * Use the term "presentable image" (rather than "swapchain image") consistently in +VK_KHR_swapchain+ and related extensions, and add a glossary term defining it. * Relocate the valid usage for samples of flink:vkGetPhysicalDeviceSparseImageFormatProperties2KHR::pname:pFormatInfo to be below the flink:VkPhysicalDeviceSparseImageFormatInfo2KHR structure.
2017-02-11 04:37:39 +00:00
\end{aligned}
Change log for January 23, 2017 Vulkan 1.0.39 spec update: * Bump API patch number and header version number to 39 for this update. Github Issues: * Clarified that only accesses via the specified buffer/image subresource ranges are included in the access scopes (public issue 306). * Add missing valid usage statements for flink:vkCreateComputePipelines and flink:vkCreateGraphicsPipelines (public issue 427). Internal Issues: * Add a Note to the <<invariance,Invariance>> appendix about a difference between OpenGL and Vulkan with regards to how primitives derived from offsets are handled (internal issue 355). * Add the +<<VK_KHR_get_physical_device_properties2>>+, +<<VK_KHR_maintenance1>>+, and +<<VK_KHR_shader_draw_parameters>>+ extensions (internal issue 448). * Add the +<<VK_EXT_shader_subgroup_vote>>+ and +<<VK_EXT_shader_subgroup_ballot>>+ extensions (internal issue 449). * Update the texture level-of-detail equation in the <<textures-scale-factor,Scale Factor Operation>> section to better approximate the ellipse major and minor axes (internal issue 547). * Forbid non-explicitly allowed uses of interface decorations in the introduction to the <<interfaces,Shader Interfaces>> chapter (internal issue 607). * Replace use of MathJax with KaTeX, for improved load-time performance as well as avoiding the scrolling-and-scrolling behavior due to MathJax asynchronous rendering when loading at an anchor inside the spec. This change also requires moving to HTML5 output for the spec instead of XHTML, and there is a visible difference in that the chapter navigation index is now in a scrollable sidebar instead of at the top of the document. We may or may not retain the nav sidebar based on feedback (internal issue 613). * Improve consistency of markup and formatting in extension appendices (internal issue 631). Other Issues: * Add explicit valid usage statements to slink:VkImageCopy requiring that the source and destination layer ranges be contained in their respective source and destination images. * Add valid usage language for swapchain of flink:vkAcquireNextImage. If the swapchain has been replaced, then it should not be passed to flink:vkAcquireNextImage. * Add a valid usage statement to flink:vkCreateImageView, that the image must have been created with an appropriate usage bit set. * Noted that slink:VkDisplayPresentInfoKHR is a valid extension of slink:VkPresentInfoKHR in the <<wsi_swapchain,WSI Swapchain>> section. * Update valid usage for flink:vkCmdSetViewport and flink:vkCmdSetScissor to account for the multiple viewport feature. If the feature is not enabled, the parameters for these functions have required values that are defined in the <<features-features-multiViewport,multiple viewports>> section of the spec but were not reflected in the valid usage text for these functions. * Add the +<<VK_EXT_swapchain_colorspace>>+ extension defining common color spaces.
2017-01-18 04:11:25 +00:00
+++++++++++++++++++
Change log for February 10, 2017 Vulkan 1.0.40 spec update: * Bump API patch number and header version number to 40 for this update. * There is a major build change in this release. We are now using the Ruby-based ``asciidoctor'' implementation, rather than the Python-based ``asciidoc'' implementation, to process the specification. While the actual specification markup changes were minimal, this requires a new set of build tools and a very different installation process, especially because we now use an experimental direct-to-PDF backend for Asciidoctor instead of Docbook->dblatex->PDF. It is no longer possible to build the Specification using asciidoc. See doc/specs/vulkan/README.adoc for some guidance on installing the new toolchain components. * There are some minor rendering issues in the PDF output due to teething problems with the asciidoctor toolchain, especially with mathematical equations. We are aware of these and working on them. Github Issues: * Updated sample code for the <<sparsememory-examples-basic,sparse resource binding example>> (public issue 97). * Modify line and point clipping behavior in the <<vertexpostproc-clipping, Primitive Clipping>> section to allow for pop-free behavior. The ability to check for which behavior is implemented may be added a future feature or extension (public issue 113). * Unify the discussions of implicit ordering throughout the spec, in particular in the new sections <<drawing-primitive-order, Primitive Order>>, <<primrast-order, Rasterization Order>>, and <<synchronization-implicit, Implicit Synchronization Guarantees>>; the discussion of <<synchronization-submission-order, submission order>>; and references elsewhere to these sections (public issue 133). * Clarify \<\<descriptorsets-compatibility,Pipeline Layout Compatibility>> language and introduce the term ``identically defined'' (public issue 164). * Add a dependency to the +VK_EXT_debug_marker+ extension that's needed to reuse the object type enum from +VK_EXT_debug_report+, and moves the definition of that enum into +VK_EXT_debug_report+ where it should be (public issue 409). * Remove redundant valid usage statement from slink:VkImageBlit (public issue 421). * Update GL_KHR_vulkan_glsl to allow the ternary operator to result in a specialization constant (public issue 424). * Fix valid usage for flink:VkPipelineShaderStageCreateInfo (public issue 426). * Correct typo in New Objects list for <<VK_EXT_debug_report>> (public issue 447). Internal Issues: * Moved to asciidoctor for spec builds (internal issue 121). * Update style guide to describe where to put new extensions-specific asciidoc files, and what to name them (internal issue 626). * Add src/spec/indexExt.py to autogenerate registry index entries linking into the 1.0-extensions specification, instead of maintaining the index manually. (internal issue 642). * Autogenerate extension dependencies and lists of all extensions and all KHR extensions from the "supported" attributes in +vk.xml+. Execute +make config/extDependency.sh+ from +doc/specs/vulkan+ when a supported extension is added to vk.xml, to regenerate the dependency script. The consequence is that specifying a single extension to the +makeExt+ script will automatically enable all extensions it depends on as well, and that the +makeAllExts+ and +makeKHR+ scripts do not need to be updated when a new extension is supported (internal issue 648). * Put extension appendices all at the same asciidoc section level, so KHR WSI extensions show up in the HTML index (internal issue 648). Other Issues: * Imbed images in the generated HTML specs instead of loading them from the images/ directory. * Fix missing EXT in extension name (ename:VK_EXT_SWAPCHAIN_COLOR_SPACE_EXTENSION_NAME). * Add new +VK_EXT_SMPTE_2086_metadata+ extension. * In the <<platformCreateSurface_xlib,Xlib Surface>> section of the +VK_KHR_xlib_surface+ specification, add language warning users that they always need to call code:XinitThreads. * Use the term "presentable image" (rather than "swapchain image") consistently in +VK_KHR_swapchain+ and related extensions, and add a glossary term defining it. * Relocate the valid usage for samples of flink:vkGetPhysicalDeviceSparseImageFormatProperties2KHR::pname:pFormatInfo to be below the flink:VkPhysicalDeviceSparseImageFormatInfo2KHR structure.
2017-02-11 04:37:39 +00:00
=== latexmath block 64
Change log for January 23, 2017 Vulkan 1.0.39 spec update: * Bump API patch number and header version number to 39 for this update. Github Issues: * Clarified that only accesses via the specified buffer/image subresource ranges are included in the access scopes (public issue 306). * Add missing valid usage statements for flink:vkCreateComputePipelines and flink:vkCreateGraphicsPipelines (public issue 427). Internal Issues: * Add a Note to the <<invariance,Invariance>> appendix about a difference between OpenGL and Vulkan with regards to how primitives derived from offsets are handled (internal issue 355). * Add the +<<VK_KHR_get_physical_device_properties2>>+, +<<VK_KHR_maintenance1>>+, and +<<VK_KHR_shader_draw_parameters>>+ extensions (internal issue 448). * Add the +<<VK_EXT_shader_subgroup_vote>>+ and +<<VK_EXT_shader_subgroup_ballot>>+ extensions (internal issue 449). * Update the texture level-of-detail equation in the <<textures-scale-factor,Scale Factor Operation>> section to better approximate the ellipse major and minor axes (internal issue 547). * Forbid non-explicitly allowed uses of interface decorations in the introduction to the <<interfaces,Shader Interfaces>> chapter (internal issue 607). * Replace use of MathJax with KaTeX, for improved load-time performance as well as avoiding the scrolling-and-scrolling behavior due to MathJax asynchronous rendering when loading at an anchor inside the spec. This change also requires moving to HTML5 output for the spec instead of XHTML, and there is a visible difference in that the chapter navigation index is now in a scrollable sidebar instead of at the top of the document. We may or may not retain the nav sidebar based on feedback (internal issue 613). * Improve consistency of markup and formatting in extension appendices (internal issue 631). Other Issues: * Add explicit valid usage statements to slink:VkImageCopy requiring that the source and destination layer ranges be contained in their respective source and destination images. * Add valid usage language for swapchain of flink:vkAcquireNextImage. If the swapchain has been replaced, then it should not be passed to flink:vkAcquireNextImage. * Add a valid usage statement to flink:vkCreateImageView, that the image must have been created with an appropriate usage bit set. * Noted that slink:VkDisplayPresentInfoKHR is a valid extension of slink:VkPresentInfoKHR in the <<wsi_swapchain,WSI Swapchain>> section. * Update valid usage for flink:vkCmdSetViewport and flink:vkCmdSetScissor to account for the multiple viewport feature. If the feature is not enabled, the parameters for these functions have required values that are defined in the <<features-features-multiViewport,multiple viewports>> section of the spec but were not reflected in the valid usage text for these functions. * Add the +<<VK_EXT_swapchain_colorspace>>+ extension defining common color spaces.
2017-01-18 04:11:25 +00:00
[latexmath]
+++++++++++++++++++
V =
\begin{cases}
(-1)^S \times 0.0, & E = 0, M = 0 \\
(-1)^S \times 2^{-14} \times { M \over 2^{10} },
& E = 0, M \neq 0 \\
(-1)^S \times 2^{E-15} \times { \left( 1 + { M \over 2^{10} } \right) },
& 0 < E < 31 \\
(-1)^S \times Inf, & E = 31, M = 0 \\
NaN, & E = 31, M \neq 0
\end{cases}
+++++++++++++++++++