Vulkan-Docs/doc/specs/vulkan/chapters/sparsemem.txt

// Copyright (c) 2015-2016 The Khronos Group Inc.
// Copyright notice at https://www.khronos.org/registry/speccopyright.html

[[sparsememory]]
= Sparse Resources

As documented in <<resources-association,Resource Memory Association>>,
sname:VkBuffer and sname:VkImage resources in {apiname} must: be bound
completely and contiguously to a single sname:VkDeviceMemory object.
This binding must: be done before the resource is used, and the
binding is immutable for the lifetime of the resource.

_Sparse resources_ relax these restrictions and provide these additional
features:

  * Sparse resources can: be bound non-contiguously to one or more
    sname:VkDeviceMemory allocations.
  * Sparse resources can: be re-bound to different memory allocations over
    the lifetime of the resource.
  * Sparse resources can: have descriptors generated and used orthogonally
    with memory binding commands.


[[sparsememory-sparseresourcefeatures]]
== Sparse Resource Features

Sparse resources have several features that must: be enabled explicitly at
resource creation time. The features are enabled by including bits in the
pname:flags parameter of slink:VkImageCreateInfo or
slink:VkBufferCreateInfo. Each feature also has one or more corresponding
feature enables specified in slink:VkPhysicalDeviceFeatures.

  * <<features-features-sparseBinding,Sparse binding>> is the base
    feature, and provides the following capabilities:

  ** Resources can: be bound at some defined (sparse block) granularity.
  ** The entire resource must: be bound to memory before use regardless of
     regions actually accessed.
  ** No specific mapping of image region to memory offset is defined, i.e.
     the location that each texel corresponds to in memory is
     implementation-dependent.
  ** Sparse buffers have a well-defined mapping of buffer range to memory
     range, where an offset into a range of the buffer that is bound to
     a single contiguous range of memory corresponds to an identical offset
     within that range of memory.
  ** Requested via the ename:VK_IMAGE_CREATE_SPARSE_BINDING_BIT and
     ename:VK_BUFFER_CREATE_SPARSE_BINDING_BIT bits.
  ** A sparse image created using ename:VK_IMAGE_CREATE_SPARSE_BINDING_BIT
     (but not ename:VK_IMAGE_CREATE_SPARSE_RESIDENCY_BIT) supports all
     formats that non-sparse usage supports, and supports both
     ename:VK_IMAGE_TILING_OPTIMAL and ename:VK_IMAGE_TILING_LINEAR tiling.

  * _Sparse Residency_ builds on (and requires) the pname:sparseBinding
    feature. It includes the following capabilities:

  ** Resources do not have to be completely bound to memory before use on
     the device.
  ** Images have a prescribed sparse image block layout, allowing specific
     rectangular regions of the image to be bound to specific offsets in
     memory allocations.
  ** Consistency of access to unbound regions of the resource is defined by
     the absence or presence of
     sname:VkPhysicalDeviceSparseProperties::pname:residencyNonResidentStrict.
     If this property is present, accesses to unbound regions of the
     resource are well defined and behave as if the data bound is populated
     with all zeros; writes are discarded. When this property is absent,
     accesses are considered safe, but reads will return undefined values.
  ** Requested via the ename:VK_IMAGE_CREATE_SPARSE_RESIDENCY_BIT and
     ename:VK_BUFFER_CREATE_SPARSE_RESIDENCY_BIT bits.
  ** Support is advertised on a finer grain via the following features:
+
--
  *** <<features-features-sparseResidencyBuffer,pname:sparseResidencyBuffer>>:
      Support for creating sname:VkBuffer objects with the
      ename:VK_BUFFER_CREATE_SPARSE_RESIDENCY_BIT.
  *** <<features-features-sparseResidencyImage2D,pname:sparseResidencyImage2D>>:
      Support for creating 2D single-sampled sname:VkImage objects with
      ename:VK_IMAGE_CREATE_SPARSE_RESIDENCY_BIT.
  *** <<features-features-sparseResidencyImage3D,pname:sparseResidencyImage3D>>:
      Support for creating 3D sname:VkImage objects with
      ename:VK_IMAGE_CREATE_SPARSE_RESIDENCY_BIT.
  *** <<features-features-sparseResidency2Samples,pname:sparseResidency2Samples>>:
      Support for creating 2D sname:VkImage objects with 2 samples and
      ename:VK_IMAGE_CREATE_SPARSE_RESIDENCY_BIT.
  *** <<features-features-sparseResidency4Samples,pname:sparseResidency4Samples>>:
      Support for creating 2D sname:VkImage objects with 4 samples and
      ename:VK_IMAGE_CREATE_SPARSE_RESIDENCY_BIT.
  *** <<features-features-sparseResidency8Samples,pname:sparseResidency8Samples>>:
      Support for creating 2D sname:VkImage objects with 8 samples and
      ename:VK_IMAGE_CREATE_SPARSE_RESIDENCY_BIT.
  *** <<features-features-sparseResidency16Samples,pname:sparseResidency16Samples>>:
      Support for creating 2D sname:VkImage objects with 16 samples and
      ename:VK_IMAGE_CREATE_SPARSE_RESIDENCY_BIT.

Implementations supporting pname:sparseResidencyImage2D are only
required: to support sparse 2D, single-sampled images. Support is
not required: for sparse 3D and MSAA images and is enabled via
pname:sparseResidencyImage3D, pname:sparseResidency2Samples,
pname:sparseResidency4Samples, pname:sparseResidency8Samples, and
pname:sparseResidency16Samples.
--
  ** A sparse image created using ename:VK_IMAGE_CREATE_SPARSE_RESIDENCY_BIT
     supports all non-compressed color formats with power-of-two texel size
     that non-sparse usage supports. Additional formats may: also be
     supported and can: be queried via
     flink:vkGetPhysicalDeviceSparseImageFormatProperties.
     ename:VK_IMAGE_TILING_LINEAR tiling is not supported.

  * <<features-features-sparseResidencyAliased,Sparse aliasing>>
    provides the following capability that can: be enabled per resource:
+
Allows physical memory ranges to be shared between multiple locations in
the same sparse resource or between multiple sparse resources, with each
binding of a memory location observing a consistent interpretation of the
memory contents.
+
See <<sparsememory-sparse-memory-aliasing,Sparse Memory Aliasing>> for
more information.


[[sparsememory-fully-resident]]
== Sparse Buffers and Fully-Resident Images

Both sname:VkBuffer and sname:VkImage objects created with the
ename:VK_IMAGE_CREATE_SPARSE_BINDING_BIT or
ename:VK_BUFFER_CREATE_SPARSE_BINDING_BIT bits can: be thought of as a
linear region of address space. In the sname:VkImage case if
ename:VK_IMAGE_CREATE_SPARSE_RESIDENCY_BIT is not used, this linear
region is entirely opaque, meaning that there is no application-visible
mapping between pixel location and memory offset.

Unless ename:VK_IMAGE_CREATE_SPARSE_RESIDENCY_BIT or
ename:VK_BUFFER_CREATE_SPARSE_RESIDENCY_BIT are also used, the entire
resource must: be bound to one or more sname:VkDeviceMemory objects before
use.


=== Sparse Buffer and Fully-Resident Image Block Size

The sparse block size in bytes for sparse buffers and fully-resident images is
reported as sname:VkMemoryRequirements::pname:alignment. pname:alignment
represents both the memory alignment requirement and the binding granularity
(in bytes) for sparse resources.


[[sparsememory-partially-resident-buffers]]
== Sparse Partially-Resident Buffers

sname:VkBuffer objects created with the
ename:VK_BUFFER_CREATE_SPARSE_RESIDENCY_BIT bit allow the buffer to be made
only partially resident. Partially resident sname:VkBuffer objects are
allocated and bound identically to sname:VkBuffer objects using only the
ename:VK_BUFFER_CREATE_SPARSE_BINDING_BIT feature. The only difference is
the ability for some regions of the buffer to be unbound during device use.


[[sparsememory-partially-resident-images]]
== Sparse Partially-Resident Images

sname:VkImage objects created with the
ename:VK_IMAGE_CREATE_SPARSE_RESIDENCY_BIT bit allow specific rectangular
regions of the image called sparse image blocks to be bound to specific
ranges of memory. This allows the application to manage residency at either
image subresource or sparse image block granularity. Each image subresource
(outside of the <<sparsememory-miptail,mip tail>>) starts on a sparse block
boundary and has dimensions that are integer multiples of the corresponding
dimensions of the sparse image block.

[NOTE]
.Note
====
Applications can: use these types of images to control level-of-detail based
on total memory consumption. If memory pressure becomes an issue the
application can: unbind and disable specific mipmap levels of images without
having to recreate resources or modify pixel data of unaffected levels.

The application can: also use this functionality to access subregions of the
image in a ``megatexture'' fashion. The application can: create a large
image and only populate the region of the image that is currently being used
in the scene.
====


[[sparsememory-accessing-unbound]]
=== Accessing Unbound Regions

The following member of sname:VkPhysicalDeviceSparseProperties affects how
data in unbound regions of sparse resources are handled by the
implementation:

  * pname:residencyNonResidentStrict

If this property is not present, reads of unbound regions of the image will
return undefined values. Both reads and writes are still considered _safe_
and will not affect other resources or populated regions of the image.

If this property is present, all reads of unbound regions of the image will
behave as if the region was bound to memory populated with all zeros;
writes will be discarded.

Formatted accesses to unbound memory may: still
alter some component values in the natural way for those accesses, e.g.
substituting a value of one for alpha in formats that do not have an alpha
component.

=======
Example: Reading the alpha component of an unbacked
ename:VK_FORMAT_R8_UNORM image will return a value of latexmath:[$1.0f$].
=======

See <<devsandqueues-physical-device-enumeration,Physical Device
Enumeration>> for instructions for retrieving physical device properties.

ifdef::implementation-guide[]
.Implementor's Note
****
For hardware that cannot: natively handle access to unbound regions of a
resource, the implementation may: allocate and bind memory to the
unbound regions. Reads and writes to unbound regions will access the
implementation-managed memory instead of causing a hardware fault.

Given that reads of unbound regions are undefined in this scenario,
implementations may: use the same physical memory for unbound regions of
multiple resources within the same process.
****
endif::implementation-guide[]


[[sparsememory-miptail]]
=== Mip Tail Regions

Sparse images created using ename:VK_IMAGE_CREATE_SPARSE_BINDING_BIT
(without also using ename:VK_IMAGE_CREATE_SPARSE_RESIDENCY_BIT) have no
specific mapping of image region or image subresource to memory offset
defined, so the entire image can: be thought of as a linear opaque address
region. However, images created with
ename:VK_IMAGE_CREATE_SPARSE_RESIDENCY_BIT do have a prescribed sparse image
block layout, and hence each image subresource must: start on a sparse block
boundary. Within each array layer, the set of mip-levels that have a smaller
size than the sparse block size in bytes are grouped together into a _mip
tail region_.

If the ename:VK_SPARSE_IMAGE_FORMAT_ALIGNED_MIP_SIZE_BIT flag is present in
the pname:flags member of sname:VkSparseImageFormatProperties, for the
image's pname:format, then any mip-level which has dimensions that are not
integer multiples of the corresponding dimensions of the sparse image block,
and all subsequent mip-levels, are also included in the mip tail region.

The following member of sname:VkPhysicalDeviceSparseProperties may: affect
how the implementation places mip levels in the mip tail region:

  * pname:residencyAlignedMipSize

Each mip tail region is bound to memory as an opaque region (i.e. must: be
bound using a slink:VkSparseImageOpaqueMemoryBindInfo structure) and may: be
of a size greater than or equal to the sparse block size in bytes. This size
is guaranteed to be an integer multiple of the sparse block size in bytes.

An implementation may: choose to allow each array-layer's mip tail region to
be bound to memory independently or require that all array-layer's mip tail
regions be treated as one. This is dictated by
ename:VK_SPARSE_IMAGE_FORMAT_SINGLE_MIPTAIL_BIT in
sname:VkSparseImageMemoryRequirements::pname:flags.

The following diagrams depict how
ename:VK_SPARSE_IMAGE_FORMAT_ALIGNED_MIP_SIZE_BIT and
ename:VK_SPARSE_IMAGE_FORMAT_SINGLE_MIPTAIL_BIT alter memory usage and
requirements.

image::images/sparseimage.{svgpdf}[align="center", title="Sparse Image"]

In the absence of ename:VK_SPARSE_IMAGE_FORMAT_ALIGNED_MIP_SIZE_BIT and
ename:VK_SPARSE_IMAGE_FORMAT_SINGLE_MIPTAIL_BIT, each array layer contains a
mip tail region containing pixel data for all mip levels smaller than the
sparse image block in any dimension.

Mip levels that are as large or larger than a sparse image block in all
dimensions can: be bound individually. Right-edges and bottom-edges of each
level are allowed to have partially used sparse blocks. Any bound
partially-used-sparse-blocks must: still have their full sparse block
size in bytes allocated in memory.

image::images/sparseimage_singlemiptail.{svgpdf}[align="center", title="Sparse Image with Single Mip Tail"]

When ename:VK_SPARSE_IMAGE_FORMAT_SINGLE_MIPTAIL_BIT is present all array
layers will share a single mip tail region.

image::images/sparseimage_alignedmipsize.{svgpdf}[align="center", title="Sparse Image with Aligned Mip Size"]

[NOTE]
.Note
====
The mip tail regions are presented here in 2D arrays simply for figure size
reasons. Each mip tail is logically a single array of sparse blocks with an
implementation-dependent mapping of pixels to sparse blocks.
====

When ename:VK_SPARSE_IMAGE_FORMAT_ALIGNED_MIP_SIZE_BIT is present the first
mip level that would contain partially used sparse blocks begins the mip tail
region. This level and all subsequent levels are placed in the mip tail.
Only the first latexmath:[$N$] mip levels whose dimensions are an exact
multiple of the sparse image block dimensions can: be bound and unbound on a
sparse block basis.

image::images/sparseimage_alignedmipsize_singlemiptail.{svgpdf}[align="center", title="Sparse Image with Aligned Mip Size and Single Mip Tail"]

[NOTE]
.Note
====
The mip tail region is presented here in a 2D array simply for figure size
reasons. It is logically a single array of sparse blocks with an
implementation-dependent mapping of pixels to sparse blocks.
====

When both ename:VK_SPARSE_IMAGE_FORMAT_ALIGNED_MIP_SIZE_BIT and
ename:VK_SPARSE_IMAGE_FORMAT_SINGLE_MIPTAIL_BIT are present the constraints
from each of these flags are in effect.


[[sparsememory-standard-shapes]]
=== Standard Sparse Image Block Shapes

Standard sparse image block shapes define a standard set of dimensions for
sparse image blocks that depend on the format of the image. Layout of pixels
within a sparse image block is implementation dependent. All currently defined
standard sparse image block shapes are 64 KB in size.

For block-compressed formats (e.g. ename:VK_FORMAT_BC5_UNORM_BLOCK), the
pixel size is the size of the compressed texel block (128-bit for etext:BC5)
thus the dimensions of the standard sparse image block shapes apply in terms
of compressed texel blocks.

.Note
====
For block-compressed formats, the dimensions of a sparse image block in terms
of texels can: be calculated by multiplying the sparse image block dimensions
by the compressed texel block dimensions.
====

<<<

[[sparsememory-sparseblockshapessingle]]
.Standard Sparse Image Block Shapes (Single Sample)
[options="header"]
|====
| PIXEL SIZE (bits) | Block Shape (2D)  | Block Shape (3D)
| *8-Bit*           | 256 × 256 × 1     | 64 × 32 × 32
| *16-Bit*          | 256 × 128 × 1     | 32 × 32 × 32
| *32-Bit*          | 128 × 128 × 1     | 32 × 32 × 16
| *64-Bit*          | 128 × 64 × 1      | 32 × 16 × 16
| *128-Bit*         | 64 × 64 × 1       | 16 × 16 × 16
|====

[[sparsememory-sparseblockshapesmsaa]]
.Standard Sparse Image Block Shapes (MSAA)
[options="header"]
|====
| PIXEL SIZE (bits)| Block Shape (2X)| Block Shape (4X) | Block Shape (8X) | Block Shape (16X)
| *8-Bit*          | 128 × 256 × 1   | 128 × 128 × 1    | 64 × 128 × 1     | 64 × 64 × 1
| *16-Bit*         | 128 × 128 × 1   | 128 × 64 × 1     | 64 × 64 × 1      | 64 × 32 × 1
| *32-Bit*         | 64 × 128 × 1    | 64 × 64 × 1      | 32 × 64 × 1      | 32 × 32 × 1
| *64-Bit*         | 64 × 64 × 1     | 64 × 32 × 1      | 32 × 32 × 1      | 32 × 16 × 1
| *128-Bit*        | 32 × 64 × 1     | 32 × 32 × 1      | 16 × 32 × 1      | 16 × 16 × 1
|====


Implementations that support the standard sparse image block shape for all
applicable formats may: advertise the following
sname:VkPhysicalDeviceSparseProperties:

  * pname:residencyStandard2DBlockShape
  * pname:residencyStandard2DMultisampleBlockShape
  * pname:residencyStandard3DBlockShape

Reporting each of these features does _not_ imply that all possible image
types are supported as sparse. Instead, this indicates that no supported
sparse image of the corresponding type will use custom sparse image block
dimensions for any formats that have a corresponding standard sparse image
block shape.


[[sparsememory-custom-shapes]]
=== Custom Sparse Image Block Shapes

An implementation that does not support a standard image block shape for a
particular sparse partially-resident image may: choose to support a custom
sparse image block shape for it instead. The dimensions of such a custom
sparse image block shape are reported in
sname:VkSparseImageFormatProperties::pname:imageGranularity. As with standard
sparse image block shapes, the size in bytes of the custom sparse image
block shape will be reported in sname:VkMemoryRequirements::pname:alignment.

Custom sparse image block dimensions are reported through
fname:vkGetPhysicalDeviceSparseImageFormatProperties and
fname:vkGetImageSparseMemoryRequirements.

An implementation mustnot: support both the standard sparse image block shape
and a custom sparse image block shape for the same image. The standard sparse
image block shape must: be used if it is supported.


[[sparsememory-multiaspect]]
=== Multiple Aspects

Partially resident images are allowed to report separate sparse properties
for different aspects of the image. One example is for depth/stencil images
where the implementation separates the depth and stencil data into separate
planes. Another reason for multiple aspects is to allow the application to
manage memory allocation for implementation-private _metadata_ associated
with the image. See the figure below:

image::images/sparseimage_multiaspect.{svgpdf}[align="center",title="Multiple Aspect Sparse Image"]

[NOTE]
.Note
====
The mip tail regions are presented here in 2D arrays simply for figure size
reasons. Each mip tail is logically a single array of sparse blocks with an
implementation-dependent mapping of pixels to sparse blocks.
====

In the figure above the depth, stencil, and metadata aspects all have unique
sparse properties. The per-pixel stencil data is
latexmath:[${}^{1}\!/\!{}_4$] the size of the depth data, hence the stencil
sparse blocks include latexmath:[$4x$] the number of pixels. The sparse block
size in bytes for all of the aspects is identical and defined by
sname:VkMemoryRequirements::pname:alignment.


==== Metadata

The metadata aspect of an image has the following constraints:

  * All metadata is reported in the mip tail region of the metadata aspect.
  * All metadata must: be bound prior to device use of the sparse image.


[[sparsememory-sparse-memory-aliasing]]
== Sparse Memory Aliasing

By default sparse resources have the same aliasing rules as
non-sparse resources. See <<resources-memory-aliasing,Memory Aliasing>> for
more information.

sname:VkDevice objects that have the
<<features-features-sparseResidencyAliased,sparseResidencyAliased>> feature
enabled are able to use the ename:VK_BUFFER_CREATE_SPARSE_ALIASED_BIT and
ename:VK_IMAGE_CREATE_SPARSE_ALIASED_BIT flags for resource creation. These
flags allow resources to access physical memory bound into multiple
locations within one or more sparse resources in a _data consistent_
fashion. This means that reading physical memory from multiple aliased
locations will return the same value.

Care must: be taken when performing a write operation to aliased physical
memory. Memory dependencies must: be used to separate writes to one alias
from reads or writes to another alias. Writes to aliased memory that are not
properly guarded against accesses to different aliases will have undefined
results for all accesses to the aliased memory.

Applications that wish to make use of data consistent sparse memory aliasing
must: abide by the following guidelines:

  * All sparse resources that are bound to aliased physical memory must: be
    created with the ename:VK_BUFFER_CREATE_SPARSE_ALIASED_BIT /
    ename:VK_IMAGE_CREATE_SPARSE_ALIASED_BIT flag.
  * All resources that access aliased physical memory must interpret the
    memory in the same way. This implies the following:
  ** Buffers and images cannot: alias the same physical memory in a data
     consistent fashion. The physical memory ranges must be used exclusively
     by buffers or used exclusively by images for data consistency to be
     guaranteed.
  ** Memory in sparse image mip tail regions cannot: access
     aliased memory in a data consistent fashion.
  ** Sparse images that alias the same physical memory must: have compatible
     formats and be using the same sparse image block shape in order to access
     aliased memory in a data consistent fashion.

Failure to follow any of the above guidelines will require the application
to abide by the normal, non-sparse resource <<resources-memory-aliasing,
aliasing rules>>. In this case memory cannot be accessed in a data
consistent fashion.

[NOTE]
.Note
====
Enabling sparse resource memory aliasing can: be a way to lower physical
memory use, but it may: reduce performance on some implementations. An
application developer can: test on their target HW and balance the memory /
performance trade-offs measured.
====


ifdef::implementation-guide[]
== Sparse Resource Implementation Guidelines

****
This section is Informative. It is included to aid in implementors'
understanding of sparse resources.

.Device Virtual Address

The basic pname:sparseBinding feature allows the resource to reserve its own
device virtual address range at resource creation time rather than relying on a
bind operation to set this. Without any other creation flags, no other
constraints are relaxed compared to normal resources. All pages must: be
bound to physical memory before the device accesses the resource.

The pname:sparseResidency feature allows the sparse resource to be used even
when not all pages are bound to memory. Hardware that supports access to
unbound pages without causing a fault may: support
pname:sparseResidencyNonResidentStrict.

Not faulting on access to unbound pages is not enough to support
pname:sparseResidencyNonResidentStrict. An implementation must: also
guarantee that reads after writes to unbound regions of the resource always
return data for the read as if the memory contains zeros. Depending on the
cache implementation of the hardware this may: not always be possible.

Hardware that does not fault, but does not guarantee correct read values
will not require dummy pages, but also mustnot: support
pname:sparseResidencyNonResidentStrict.

Hardware that cannot: access unbound pages without causing a fault will
require the implementation to bind the entire device virtual address range
to physical memory. Any pages that the application does not bind to memory
may: be bound to one (or more) ``dummy'' physical page(s) allocated by the
implementation. Given the following properties:

  * A process mustnot: access memory from another process
  * Reads return undefined values

It is sufficient for each host process to allocate these dummy
pages and use them for all resources in that process. Implementations may:
allocate more often (per instance, per device, or per resource).


.Binding Memory

The byte size reported in sname:VkMemoryRequirements::pname:size must: be
greater than or equal to the amount of physical memory required: to fully
populate the resource. Some hardware requires ``holes'' in the device
virtual address range that are never accessed. These holes may: be included
in the pname:size reported for the resource.

Including or not including the device virtual address holes in the resource
size will alter how the implementation provides support for
sname:VkSparseImageOpaqueMemoryBindInfo. This operation must: be supported
for all sparse images, even ones created with
ename:VK_IMAGE_CREATE_SPARSE_RESIDENCY_BIT.

ifdef::editing-notes[]
[NOTE]
.editing-note
====
@ntrevett suggested expanding the NOTE tag below to encompass everything
from ``The cost is...'' in the first bullet point through the current note.
TBD.
====
endif::editing-notes[]

  * If the holes are included in the size, this bind function becomes very
    easy. In most cases the pname:resourceOffset is simply a device virtual
    address offset and the implementation does not require any sophisticated
    logic to determine what device virtual address to bind. The cost is that
    the application can: allocate more physical memory for the resource than
    it needs.
  * If the holes are not included in the size, the application can: allocate
    less physical memory than otherwise for the resource. However, in this
    case the implementation must: account for the holes when mapping
    pname:resourceOffset to the actual device virtual address intended to be
    mapped.

[NOTE]
.Note
====
If the application always uses sname:VkSparseImageMemoryBindInfo to bind
memory for the non-mip-tail levels, any holes that are present in the
resource size may: never be bound.

Since sname:VkSparseImageMemoryBindInfo uses pixel locations to determine
which device virtual addresses to bind, it is impossible to bind device
virtual address holes with this operation.
====

.Binding Metadata Memory

All metadata for sparse images have their own sparse properties and are
embedded in the mip tail region for said properties. See the
<<sparsememory-multiaspect,Multiaspect>> section for details.

Given that metadata is in a mip tail region, and the mip tail region must:
be reported as contiguous (either globally or per-array-layer), some
implementations will have to resort to complicated offset -> device virtual
address mapping for handling sname:VkSparseImageOpaqueMemoryBindInfo.

To make this easier on the implementation, the
ename:VK_SPARSE_MEMORY_BIND_METADATA_BIT explicitly denotes when
metadata is bound with sname:VkSparseImageOpaqueMemoryBindInfo. When this
flag is not present, the pname:resourceOffset may: be treated as a strict
device virtual address offset.

When ename:VK_SPARSE_MEMORY_BIND_METADATA_BIT is present, the
pname:resourceOffset must: have been derived explicitly from the
pname:imageMipTailOffset in the sparse resource properties returned for the
metadata aspect. By manipulating the value returned for
pname:imageMipTailOffset, the pname:resourceOffset does not have to
correlate directly to a device virtual address offset, and may: instead be
whatever values makes it easiest for the implementation to derive the
correct device virtual address.

****
endif::implementation-guide[]


[[sparsememory-resourceapi]]
== Sparse Resource API

The APIs related to sparse resources are grouped into the following
categories:

* <<sparsememory-physicalfeatures,Physical Device Features>>
* <<sparsememory-physicalprops,Physical Device Sparse Properties>>
* <<sparsememory-format-props,Sparse Image Format Properties>>
* <<sparsememory-resource-creation,Sparse Resource Creation>>
* <<sparsememory-memory-requirements,Sparse Resource Memory Requirements>>
* <<sparsememory-resource-binding,Binding Resource Memory>>


[[sparsememory-physicalfeatures]]
=== Physical Device Features

Some sparse-resource related features are reported and enabled in
sname:VkPhysicalDeviceFeatures. These features must: be supported and
enabled on the sname:VkDevice object before applications can: use them. See
<<features-features,Physical Device Features>> for information on how to get
and set enabled device features, and for more detailed explanations of these
features.


==== Sparse Physical Device Features

  * pname:sparseBinding: Support for creating sname:VkBuffer and
    sname:VkImage objects with the ename:VK_BUFFER_CREATE_SPARSE_BINDING_BIT
    and ename:VK_IMAGE_CREATE_SPARSE_BINDING_BIT flags, respectively.
  * pname:sparseResidencyBuffer: Support for creating sname:VkBuffer
    objects with the ename:VK_BUFFER_CREATE_SPARSE_RESIDENCY_BIT flag.
  * pname:sparseResidencyImage2D: Support for creating 2D single-sampled
    sname:VkImage objects with ename:VK_IMAGE_CREATE_SPARSE_RESIDENCY_BIT.
  * pname:sparseResidencyImage3D: Support for creating 3D sname:VkImage
    objects with ename:VK_IMAGE_CREATE_SPARSE_RESIDENCY_BIT.
  * pname:sparseResidency2Samples: Support for creating 2D sname:VkImage
    objects with 2 samples and ename:VK_IMAGE_CREATE_SPARSE_RESIDENCY_BIT.
  * pname:sparseResidency4Samples: Support for creating 2D sname:VkImage
    objects with 4 samples and ename:VK_IMAGE_CREATE_SPARSE_RESIDENCY_BIT.
  * pname:sparseResidency8Samples: Support for creating 2D sname:VkImage
    objects with 8 samples and ename:VK_IMAGE_CREATE_SPARSE_RESIDENCY_BIT.
  * pname:sparseResidency16Samples: Support for creating 2D sname:VkImage
    objects with 16 samples and ename:VK_IMAGE_CREATE_SPARSE_RESIDENCY_BIT.
  * pname:sparseResidencyAliased: Support for creating sname:VkBuffer and
    sname:VkImage objects with the ename:VK_BUFFER_CREATE_SPARSE_ALIASED_BIT
    and ename:VK_IMAGE_CREATE_SPARSE_ALIASED_BIT flags, respectively.


[[sparsememory-physicalprops]]
=== Physical Device Sparse Properties

Some features of the implementation are not possible to disable, and are
reported to allow applications to alter their sparse resource usage
accordingly. These read-only capabilites are reported in the
pname:sparseProperties member of slink:VkPhysicalDeviceProperties.
The definition of pname:sparseProperties is

include::../structs/VkPhysicalDeviceSparseProperties.txt[]

  * pname:residencyStandard2DBlockShape is ename:VK_TRUE if the physical
    device will access all single-sample 2D sparse resources using the
    standard sparse image block shapes (based on image format), as described
    in the <<sparsememory-sparseblockshapessingle,Standard Sparse Image Block
    Shapes (Single Sample)>> table. If this property is not supported the
    value returned in the pname:imageGranularity member of the
    sname:VkSparseImageFormatProperties structure for single-sample 2D
    images is not required: to match the standard sparse image block
    dimensions listed in the table.
  * pname:residencyStandard2DMultisampleBlockShape is ename:VK_TRUE if the
    physical device will access all multisample 2D sparse resources using
    the standard sparse image block shapes (based on image format), as
    described in the <<sparsememory-sparseblockshapesmsaa,Standard Sparse
    Image Block Shapes (MSAA)>> table. If this property is not supported, the
    value returned in the pname:imageGranularity member of the
    sname:VkSparseImageFormatProperties structure for multisample 2D images
    is not required: to match the standard sparse image block dimensions
    listed in the table.
  * pname:residencyStandard3DBlockShape is ename:VK_TRUE if the physical
    device will access all 3D sparse resources using the standard sparse image
    block shapes (based on image format), as described in the
    <<sparsememory-sparseblockshapessingle,Standard Sparse Image Block
    Shapes (Single Sample)>> table. If this property is not supported, the
    value returned in the pname:imageGranularity member of the
    sname:VkSparseImageFormatProperties structure for 3D images is not
    required: to match the standard sparse image block dimensions listed in
    the table.
  * pname:residencyAlignedMipSize is ename:VK_TRUE if images with mip level
    dimensions that are not integer multiples of the corresponding dimensions
    of the sparse image block may: be placed in the mip tail. If this property
    is not reported, only mip levels with dimensions smaller than the
    pname:imageGranularity member of the sname:VkSparseImageFormatProperties
    structure will be placed in the mip tail. If this property is reported the
    implementation is allowed to return
    ename:VK_SPARSE_IMAGE_FORMAT_ALIGNED_MIP_SIZE_BIT in the pname:flags
    member of sname:VkSparseImageFormatProperties, indicating that mip level
    dimensions that are not integer multiples of the corresponding dimensions
    of the sparse image block will be placed in the mip tail.
  * pname:residencyNonResidentStrict specifies whether the physical device
    can: consistently access non-resident regions of a resource. If this
    property is ename:VK_TRUE, access to non-resident regions of resources
    will be guaranteed to return values as if the resource were populated
    with 0; writes to non-resident regions will be discarded.

include::../validity/structs/VkPhysicalDeviceSparseProperties.txt[]


[[sparsememory-format-props]]
=== Sparse Image Format Properties

Given that certain aspects of sparse image support, including the
sparse image block dimensions, may: be implementation-dependent,
flink:vkGetPhysicalDeviceSparseImageFormatProperties can: be used to
query for sparse image format properties prior to resource creation. This
command is used to check whether a given set of sparse image parameters is
supported and what the sparse image block shape will be.


==== Sparse Image Format Properties API

include::../structs/VkSparseImageFormatProperties.txt[]

  * pname:aspectMask is a elink:VkImageAspectFlags specifying which
    aspects of the image the properties apply to.
  * pname:imageGranularity is the width, height, and depth of the
    sparse image block in texels or compressed texel blocks.
  * pname:flags is a bitmask specifying additional information about
    the sparse resource. Bits which can: be set include:
+
--
include::../enums/VkSparseImageFormatFlagBits.txt[]

  ** If ename:VK_SPARSE_IMAGE_FORMAT_SINGLE_MIPTAIL_BIT is set, the image
     uses a single mip tail region for all array layers.
  ** If ename:VK_SPARSE_IMAGE_FORMAT_ALIGNED_MIP_SIZE_BIT is set, the first
     mip level whose dimensions are not integer multiples of the corresponding
     dimensions of the sparse image block begins the mip tail region.
  ** If ename:VK_SPARSE_IMAGE_FORMAT_NONSTANDARD_BLOCK_SIZE_BIT is set, the
     image uses non-standard sparse image block dimensions, and the
     pname:imageGranularity values do not match the standard sparse image
     block dimensions for the given pixel format.
--

include::../validity/structs/VkSparseImageFormatProperties.txt[]

fname:vkGetPhysicalDeviceSparseImageFormatProperties returns an
array of sname:VkSparseImageFormatProperties. Each element will describe
properties for one set of image aspects that are bound simultaneously in the
image. This is usually one element for each aspect in the image, but for
interleaved depth/stencil images there is only one element describing the
combined aspects.

include::../protos/vkGetPhysicalDeviceSparseImageFormatProperties.txt[]

  * pname:physicalDevice is the physical device from which to query the
    sparse image capabilities.
  * pname:format is the image format.
  * pname:type is the dimensionality of image.
  * pname:samples is the number of samples per pixel as defined in
    elink:VkSampleCountFlagBits.
  * pname:usage is a bitfield describing the intended usage of the image.
  * pname:tiling is the tiling arrangement of the data elements in memory.
  * pname:pPropertyCount is a pointer to an integer related to the number of
    sparse format properties available or queried, as described below.
  * pname:pProperties is either `NULL` or a pointer to an array of
    slink:VkSparseImageFormatProperties structures.

If pname:pProperties is `NULL`, then the number of sparse format properties
available is returned in pname:pPropertyCount. Otherwise,
pname:pPropertyCount must: point to a variable set by the user to the number
of elements in the pname:pProperties array, and on return the variable is
overwritten with the number of structures actually written to
pname:pProperties. If pname:pPropertyCount is less than the
number of sparse format properties available, at most pname:pPropertyCount
structures will be written.

include::../validity/protos/vkGetPhysicalDeviceSparseImageFormatProperties.txt[]

If ename:VK_IMAGE_CREATE_SPARSE_RESIDENCY_BIT is not supported for the given
arguments, pname:pPropertyCount will be set to zero upon return, and no data
will be written to pname:pProperties.

Multiple aspects are returned for depth/stencil images that are implemented
as separate planes by the implementation. The depth and stencil data planes
each have unique sname:VkSparseImageFormatProperties data.

Depth/stencil images with depth and stencil data interleaved into a single
plane will return a single sname:VkSparseImageFormatProperties structure
with the pname:aspectMask set to ename:VK_IMAGE_ASPECT_DEPTH_BIT |
ename:VK_IMAGE_ASPECT_STENCIL_BIT.


[[sparsememory-resource-creation]]
=== Sparse Resource Creation

Sparse resources require that one or more sparse feature flags be specified
(as part of the sname:VkPhysicalDeviceFeatures structure described
previously in the <<sparsememory-physicalfeatures,Physical Device Features>>
section) at CreateDevice time. When the appropriate device features are
enabled, the etext:VK_BUFFER_CREATE_SPARSE_* and
etext:VK_IMAGE_CREATE_SPARSE_* flags can: be used. See flink:vkCreateBuffer
and flink:vkCreateImage for details of the resource creation APIs.

[NOTE]
.Note
====
Specifying ename:VK_BUFFER_CREATE_SPARSE_RESIDENCY_BIT or
ename:VK_IMAGE_CREATE_SPARSE_RESIDENCY_BIT requires specifying
ename:VK_BUFFER_CREATE_SPARSE_BINDING_BIT or
ename:VK_IMAGE_CREATE_SPARSE_BINDING_BIT, respectively, as well. This means
that resources must: be created with the appropriate etext:*_SPARSE_BINDING_BIT
to be used with the sparse binding command (fname:vkQueueBindSparse).
====


[[sparsememory-memory-requirements]]
=== Sparse Resource Memory Requirements

Sparse resources have specific memory requirements related to binding sparse
memory. These memory requirements are reported differently for
sname:VkBuffer objects and sname:VkImage objects.


[[sparsememory-memory-buffer-fully-resident]]
==== Buffer and Fully-Resident Images

Buffers (both fully and partially resident) and fully-resident images can:
be bound to memory using only the data from sname:VkMemoryRequirements. For
all sparse resources the sname:VkMemoryRequirements::pname:alignment member
denotes both the bindable sparse block size in bytes and required: alignment
of sname:VkDeviceMemory.


[[sparsememory-memory-partially-resident]]
==== Partially Resident Images

Partially resident images have a different method for binding memory. As
with buffers and fully resident images, the
sname:VkMemoryRequirements::pname:alignment field denotes the bindable sparse
block size in bytes for the image.

Requesting sparse memory requirements for sname:VkImage objects using
fname:vkGetImageSparseMemoryRequirements will return an array of one or more
sname:VkSparseImageMemoryRequirements structures. Each structure describes
the sparse memory requirements for a group of aspects of the image.

The sparse image must: have been created using the
ename:VK_IMAGE_CREATE_SPARSE_RESIDENCY_BIT flag to retrieve valid sparse
image memory requirements.


==== Sparse Image Memory Requirements

include::../structs/VkSparseImageMemoryRequirements.txt[]

  * pname:formatProperties.aspectMask is the set of aspects of the image
    that this sparse memory requirement applies to. This will usually have a
    single aspect specified. However, depth/stencil images may: have depth
    and stencil data interleaved in the same sparse block, in which case
    both ename:VK_IMAGE_ASPECT_DEPTH_BIT and
    ename:VK_IMAGE_ASPECT_STENCIL_BIT would be present.
  * pname:formatProperties.imageGranularity describes the dimensions of a
    single bindable sparse image block in pixel units. For aspect
    ename:VK_IMAGE_ASPECT_METADATA_BIT, all dimensions will be zero
    pixels. All metadata is located in the mip tail region.
  * pname:formatProperties.flags contains members of
    elink:VkSparseImageFormatFlags:
  ** If ename:VK_SPARSE_IMAGE_FORMAT_SINGLE_MIPTAIL_BIT is set the image
     uses a single mip tail region for all array layers.
  ** If ename:VK_SPARSE_IMAGE_FORMAT_ALIGNED_MIP_SIZE_BIT is set the
     dimensions of mip levels must: be integer multiples of the corresponding
     dimensions of the sparse image block for levels not located in the mip
     tail.
  ** If ename:VK_SPARSE_IMAGE_FORMAT_NONSTANDARD_BLOCK_SIZE_BIT is set the
     image uses non-standard sparse image block dimensions. The
     pname:formatProperties.imageGranularity values do not match the
     standard sparse image block dimension corresponding to the image's
     pixel format.
  * pname:imageMipTailFirstLod is the first mip level at which image
    subresources are included in the mip tail region.
  * pname:imageMipTailSize is the memory size (in bytes) of the mip tail
    region. If pname:formatProperties.flags contains
    ename:VK_SPARSE_IMAGE_FORMAT_SINGLE_MIPTAIL_BIT, this is the size of the
    whole mip tail, otherwise this is the size of the mip tail of a single
    array layer. This value is guaranteed to be a multiple of the sparse block
    size in bytes.
  * pname:imageMipTailOffset is the opaque memory offset used with
    slink:VkSparseImageOpaqueMemoryBindInfo to bind the mip tail region(s).
  * pname:imageMipTailStride is the offset stride between each array-layer's
    mip tail, if pname:formatProperties.flags does not contain
    ename:VK_SPARSE_IMAGE_FORMAT_SINGLE_MIPTAIL_BIT (otherwise the value is
    undefined).

include::../validity/structs/VkSparseImageMemoryRequirements.txt[]

Query sparse memory requirements for an image by calling:

include::../protos/vkGetImageSparseMemoryRequirements.txt[]

  * pname:device is the logical device that owns the image.
  * pname:image is the sname:VkImage object to get the memory requirements
    for.
  * pname:pSparseMemoryRequirementCount is a pointer to an integer related
    to the number of sparse memory requirements available or queried, as
    described below.
  * pname:pSparseMemoryRequirements is either `NULL` or a pointer to an
    array of sname:VkSparseImageMemoryRequirements structures.

If pname:pSparseMemoryRequirements is `NULL`, then the number of sparse
memory requirements available is returned in
pname:pSparseMemoryRequirementCount. Otherwise,
pname:pSparseMemoryRequirementCount must: point to a variable set by the
user to the number of elements in the pname:pSparseMemoryRequirements array,
and on return the variable is overwritten with the number of structures
actually written to pname:pSparseMemoryRequirements. If
pname:pSparseMemoryRequirementCount is less than the number of sparse memory
requirements available, at most pname:pSparseMemoryRequirementCount
structures will be written.

If the image was not created with ename:VK_IMAGE_CREATE_SPARSE_RESIDENCY_BIT
then pname:pSparseMemoryRequirementCount will be set to zero and
pname:pSparseMemoryRequirements will not be written to.

include::../validity/protos/vkGetImageSparseMemoryRequirements.txt[]

[NOTE]
.Note
====
It is legal for an implementation to report a larger value in
sname:VkMemoryRequirements::pname:size than would be obtained by adding
together memory sizes for all sname:VkSparseImageMemoryRequirements returned
by fname:vkGetImageSparseMemoryRequirements. This may: occur when the
hardware requires unused padding in the address range describing the
resource.
====


[[sparsememory-resource-binding]]
=== Binding Resource Memory

Non-sparse resources are backed by a single physical allocation prior to
device use (via fname:vkBindImageMemory or fname:vkBindBufferMemory), and
their backing mustnot: be changed. On the other hand, sparse resources can
be bound to memory non-contiguously and these bindings can be altered
during the lifetime of the resource.

[NOTE]
.Note
====
It is important to note that freeing a sname:VkDeviceMemory object with
fname:vkFreeMemory will not cause resources (or resource regions) bound to
the memory object to become unbound. Access to resources that are bound to
memory objects that have been freed will result in undefined behavior,
potentially including application termination.

Implementations must: ensure that no access to physical memory
owned by the system or another process will occur in this scenario. In other
words, accessing resources bound to freed memory may: result in application
termination, but mustnot: result in system termination or in reading
non-process-accessible memory.
====

Sparse memory bindings execute on a queue that includes the
ename:VK_QUEUE_SPARSE_BINDING_BIT bit. Applications must: use
<<synchronization,synchronization primitives>>
to guarantee that other queues do not access ranges of memory
concurrently with a binding change. Accessing memory in a range while it is
being rebound results in undefined behavior. It is valid to access other
ranges of the same resource while a bind operation is executing.

[NOTE]
.Note
====
Implementations must: provide a guarantee that simultaneously binding sparse
blocks while another queue accesses those same sparse blocks via a sparse
resource mustnot: access memory owned by another process or otherwise corrupt
the system.
====

While some implementations may: include ename:VK_QUEUE_SPARSE_BINDING_BIT
support in queue families that also include graphics and compute support,
other implementations may: only expose a
ename:VK_QUEUE_SPARSE_BINDING_BIT-only queue family. In either case,
applications must: use <<synchronization,synchronization primitives>> to
explicitly request any ordering dependencies between sparse memory binding
operations and other graphics/compute/transfer operations, as sparse binding
operations are not automatically ordered against command buffer execution,
even within a single queue.

When binding memory explicitly for the ename:VK_IMAGE_ASPECT_METADATA_BIT
the application must: use the ename:VK_SPARSE_MEMORY_BIND_METADATA_BIT in
the sname:VkSparseMemoryBind::pname:flags field when binding memory. Binding
memory for metadata is done the same way as binding memory for the mip tail,
with the addition of the ename:VK_SPARSE_MEMORY_BIND_METADATA_BIT flag.

Binding the mip tail for any aspect must: only be performed using
slink:VkSparseImageOpaqueMemoryBindInfo. If pname:formatProperties.flags
contains ename:VK_SPARSE_IMAGE_FORMAT_SINGLE_MIPTAIL_BIT, then it can: be
bound with a single slink:VkSparseMemoryBind structure, with
pname:resourceOffset = pname:imageMipTailOffset and pname:size =
pname:imageMipTailSize.

If pname:formatProperties.flags does not contain
ename:VK_SPARSE_IMAGE_FORMAT_SINGLE_MIPTAIL_BIT then the offset for the mip
tail in each array layer is given as:

[source,{basebackend@docbook:c++:cpp}]
--
arrayMipTailOffset = imageMipTailOffset + arrayLayer * imageMipTailStride;
--

and the mip tail can: be bound with code:layerCount slink:VkSparseMemoryBind
structures, each using pname:size = pname:imageMipTailSize and
pname:resourceOffset = pname:arrayMipTailOffset as defined above.

Sparse memory binding is handled by the following APIs and related data
structures.


[[sparsemem-memory-binding]]
==== Sparse Memory Binding Functions

include::../enums/VkSparseMemoryBindFlagBits.txt[]
include::../flags/VkSparseMemoryBindFlags.txt[]

  * ename:VK_SPARSE_MEMORY_BIND_METADATA_BIT is used to indicate
    that the memory being bound is only for the metadata aspect.

include::../structs/VkSparseMemoryBind.txt[]

  * pname:resourceOffset is the offset into the resource.
  * pname:size is the size of the memory region to be bound.
  * pname:memory is the sname:VkDeviceMemory object that the range of the
    resource is bound to. If pname:memory is sname:VK_NULL_HANDLE, the range
    is unbound.
  * pname:memoryOffset is the offset into the sname:VkDeviceMemory object to
    bind the resource range to. If pname:memory is sname:VK_NULL_HANDLE,
    this value is ignored.
  * pname:flags are sparse memory binding flags.

include::../validity/structs/VkSparseMemoryBind.txt[]

The _binding range_ latexmath:[$[\mathit{resourceOffset},
\mathit{resourceOffset} + \mathit{size})$] has different constraints based
on pname:flags. If pname:flags contains
ename:VK_SPARSE_MEMORY_BIND_METADATA_BIT, the binding range must: be within
the mip tail region of the metadata aspect. This metadata region is defined
by:

[latexmath]
++++++++++++++++++++++++++
\begin{align*}
\mathit{metadataRegion} = [&
        \mathit{imageMipTailOffset} + \mathit{imageMipTailStride} \times n,\\
        &\mathit{imageMipTailOffset} +
                \mathit{imageMipTailStride} \times n + \mathit{imageMipTailSize})
\end{align*}
++++++++++++++++++++++++++

Where pname:imageMipTailOffset, pname:imageMipTailSize, and
pname:imageMipTailStride values are from the
slink:VkSparseImageMemoryRequirements that correspond to the metadata aspect
of the image. The term latexmath:[$n$] is a valid array layer index for the
image.

pname:imageMipTailStride is considered to be zero for aspects where
sname:VkSparseImageMemoryRequirements::pname:formatProperties.flags contains
ename:VK_SPARSE_IMAGE_FORMAT_SINGLE_MIPTAIL_BIT.

If pname:flags does not contain ename:VK_SPARSE_MEMORY_BIND_METADATA_BIT,
the binding range must: be within the range
latexmath:[$[0, {\mathit{VkMemoryRequirements}::\mathit{size}})$].

Memory is bound to sname:VkBuffer objects created with the
ename:VK_BUFFER_CREATE_SPARSE_BINDING_BIT flag using the following
structure:

include::../structs/VkSparseBufferMemoryBindInfo.txt[]

  * pname:buffer is the sname:VkBuffer object to be bound.
  * pname:bindCount is the number of sname:VkSparseMemoryBind structures in
    the pname:pBinds array.
  * pname:pBinds is a pointer to array of sname:VkSparseMemoryBind
    structures.

include::../validity/structs/VkSparseBufferMemoryBindInfo.txt[]

Memory is bound to opaque regions of sname:VkImage objects created with the
ename:VK_IMAGE_CREATE_SPARSE_BINDING_BIT flag using the following
structure:

include::../structs/VkSparseImageOpaqueMemoryBindInfo.txt[]

  * pname:image is the sname:VkImage object to be bound.
  * pname:bindCount is the number of sname:VkSparseMemoryBind structures in
    the pname:pBinds array.
  * pname:pBinds is a pointer to array of sname:VkSparseMemoryBind
    structures.

include::../validity/structs/VkSparseImageOpaqueMemoryBindInfo.txt[]

[NOTE]
.Note
==================
This operation is normally used to bind memory to fully-resident sparse
images or for mip tail regions of partially resident images. However, it
can: also be used to bind memory for the entire binding range of partially
resident images.

In case pname:flags does not contain
ename:VK_SPARSE_MEMORY_BIND_METADATA_BIT, the pname:resourceOffset is in the
range latexmath:[$[0, {\mathit{VkMemoryRequirements}::\mathit{size}})$].
This range includes data from all aspects of the image, including metadata.
For most implementations this will probably mean that the
pname:resourceOffset is a simple device address offset within the resource.
It is possible for an application to bind a range of memory that includes
both resource data and metadata. However, the application would not know
what part of the image the memory is used for, or if any range is being used
for metadata.

When pname:flags contains ename:VK_SPARSE_MEMORY_BIND_METADATA_BIT, the
binding range specified must: be within the mip tail region of the metadata
aspect. In this case the pname:resourceOffset is not required: to be a
simple device address offset within the resource. However, it _is_ defined
to be within [imageMipTailOffset, imageMipTailOffset + imageMipTailSize) for
the metadata aspect. See slink:VkSparseMemoryBind for the full constraints
on binding region with this flag present.
==================

Memory can: be bound to sparse image blocks of sname:VkImage objects created
with the ename:VK_IMAGE_CREATE_SPARSE_RESIDENCY_BIT flag using the following
structure:

include::../structs/VkSparseImageMemoryBindInfo.txt[]

  * pname:image is the sname:VkImage object to be bound
  * pname:bindCount is the number of sname:VkSparseImageMemoryBind
    structures in pBinds array
  * pname:pBinds is a pointer to array of sname:VkSparseImageMemoryBind
    structures

include::../validity/structs/VkSparseImageMemoryBindInfo.txt[]

Where sname:VkSparseImageMemoryBind is defined as follows:

include::../structs/VkSparseImageMemoryBind.txt[]

  * pname:subresource is the aspectMask and region of interest in the image.
  * pname:offset are the coordinates of the first texel within the image
    subresource to bind.
  * pname:extent is the size in texels of the region within the image
    subresource to bind. The extent must: be a multiple of the sparse image
    block dimensions, except when binding sparse image blocks along the edge
    of a image subresource it can: instead be such that any coordinate of
    latexmath:[$\mathit{offset} + \mathit{extent}$] equals the corresponding
    dimensions of the image subresource.
  * pname:memory is the sname:VkDeviceMemory object that the sparse image
    blocks of the image are bound to. If pname:memory is sname:VK_NULL_HANDLE,
    the sparse image blocks are unbound.
  * pname:memoryOffset is an offset into sname:VkDeviceMemory object. If
    pname:memory is sname:VK_NULL_HANDLE, this value is ignored.
  * pname:flags are sparse memory binding flags.

include::../validity/structs/VkSparseImageMemoryBind.txt[]

Sparse binding operations are submitted to a queue for execution via the
command:

include::../protos/vkQueueBindSparse.txt[]

  * pname:queue is the queue to submit the sparse binding operation to.
  * pname:bindInfoCount is the size of the array pointed to by
    pname:pBindInfo.
  * pname:pBindInfo is an array of slink:VkBindSparseInfo structures
    each specifying the parameters of a sparse binding operation batch as
    described below.
  * pname:fence, if not ename:VK_NULL_HANDLE, is a fence to be signaled
    once the sparse binding operation completes.

Each batch of sparse binding operations is represented by a list of
slink:VkSparseBufferMemoryBindInfo, slink:VkSparseImageOpaqueMemoryBindInfo,
and slink:VkSparseImageMemoryBindInfo structures (encapsulated in a
slink:VkBindSparseInfo structure), each preceded by a list of semaphores
upon which to wait before beginning execution of the operations, and
followed by a second list of semaphores to signal upon completion of the
operations.

When all sparse binding operations in pname:pBindInfo have completed
execution, the status of pname:fence is set to signaled, providing certain
<<synchronization-implicit-ordering,implicit ordering guarantees>>.

Within a batch, a given range of a resource must: not be bound more than
once. Across batches, if a range is to be bound to one allocation and offset
and then to another allocation and offset, then the application must:
guarantee (usually using semaphores) that the binding operations are
executed in the correct order, as well as to order binding operations
against the execution of command buffer submissions.

include::../validity/protos/vkQueueBindSparse.txt[]

include::../structs/VkBindSparseInfo.txt[]

  * pname:sType is the type of this structure.
  * pname:pNext is `NULL` or a pointer to an extension-specific structure.
  * pname:waitSemaphoreCount is the number of semaphores upon which to
    wait before executing the sparse binding operations for the batch.
  * pname:pWaitSemaphores is a pointer to an array of semaphores upon which
    to wait before executing the sparse binding operations in the batch.
  * pname:bufferBindCount is the number of sparse buffer bindings to
    perform.
  * pname:pBufferBinds is an array of slink:VkSparseBufferMemoryBindInfo
    structures, indicating sparse buffer bindings to perform as described
    above.
  * pname:imageOpaqueBindCount is the number of opaque sparse image bindings
    to perform.
  * pname:pImageOpaqueBinds is an array of
    slink:VkSparseImageOpaqueMemoryBindInfo structures, indicating opaque
    sparse image bindings to perform as described above.
  * pname:imageBindCount is the number of sparse image bindings to perform.
  * pname:pImageBinds is an array of slink:VkSparseImageMemoryBindInfo
    structures, indicating sparse image bindings to perform as described
    above.
  * pname:signalSemaphoreCount is the number of semaphores to be signaled
    once the sparse binding operations specified by the structure have
    completed execution.
  * pname:pSignalSemaphores is a pointer to an array of semaphores which
    will be signaled when the sparse binding operations for this batch have
    completed execution.

include::../validity/structs/VkBindSparseInfo.txt[]


[[sparsememory-examples]]
== Examples

The following examples illustrate basic creation of sparse images and
binding them to physical memory.


[[sparsememory-examples-basic]]
=== Basic Sparse Resources

This basic example creates a normal sname:VkImage object but uses
fine-grained memory allocation to back the resource with multiple memory
ranges.

[source,{basebackend@docbook:c++:cpp}]
---------------------------------------------------
VkDevice                device;
VkQueue                 queue;
VkImage                 sparseImage;
VkMemoryRequirements    memoryRequirements = {};
VkDeviceSize            offset = 0;
VkSparseMemoryBind      binds[MAX_CHUNKS] = {}; // MAX_CHUNKS is NOT part of Vulkan
uint32_t                bindCount = 0;

// ...

// Allocate image object
const VkImageCreateInfo sparseImageInfo =
{
    VK_STRUCTURE_TYPE_IMAGE_CREATE_INFO,        // sType
    NULL,                                       // pNext
    VK_IMAGE_CREATE_SPARSE_BINDING_BIT | ...,   // flags
    ...
};
vkCreateImage(device, &sparseImageInfo, &sparseImage);

// Get memory requirements
vkGetImageMemoryRequirements(
    device,
    sparseImage,
    &memoryRequirements);

// Bind memory in fine-grained fashion, find available memory ranges
// from potentially multiple VkDeviceMemory pools.
// (Illustration purposes only, can be optimized for perf)
while (memoryRequirements.size && bindCount < MAX_CHUNKS)
{
    VkSparseMemoryBind* pBind = &binds[bindCount];
    pBind->resourceOffset = offset;

    AllocateOrGetMemoryRange(
        device,
        &memoryRequirements,
        &pBind->memory,
        &pBind->memoryOffset,
        &pBind->size);

    // memory ranges must be sized as multiples of the alignment
    assert(IsMultiple(pBind->size, memoryRequirements.alignment));
    assert(IsMultiple(pBind->memoryOffset, memoryRequirements.alignment));

    memoryRequirements.size -= pBind->size;
    offset                  += pBind->size;
    bindCount++;
}

// Ensure all image has backing
if (memoryRequirements.size)
{
    // Error condition - too many chunks
}

const VkSparseImageOpaqueMemoryBindInfo opaqueBindInfo =
{
    sparseImage,                                // image
    bindCount,                                  // bindCount
    binds                                       // pBinds
};

const VkBindSparseInfo bindSparseInfo =
{
    VK_STRUCTURE_TYPE_BIND_SPARSE_INFO,         // sType
    NULL,                                       // pNext
    ...
    1,                                          // imageOpaqueBindCount
    &opaqueBindInfo,                            // pImageOpaqueBinds
    ...
};

// vkQueueBindSparse is application synchronized per queue object.
AcquireQueueOwnership(queue);

// Actually bind memory
vkQueueBindSparse(queue, 1, &bindSparseInfo, VK_NULL_HANDLE);

ReleaseQueueOwnership(queue);
---------------------------------------------------


[[sparsememory-examples-advanced]]
=== Advanced Sparse Resources

This more advanced example creates an arrayed color attachment / texture
image and binds only LOD zero and the required: metadata to physical memory.

[source,{basebackend@docbook:c++:cpp}]
---------------------------------------------------
VkDevice                            device;
VkQueue                             queue;
VkImage                             sparseImage;
VkMemoryRequirements                memoryRequirements = {};
uint32_t                            sparseRequirementsCount = 0;
VkSparseImageMemoryRequirements*    pSparseReqs = NULL;
VkSparseMemoryBind                  binds[MY_IMAGE_ARRAY_SIZE] = {};
VkSparseImageMemoryBind             imageBinds[MY_IMAGE_ARRAY_SIZE] = {};
uint32_t                            bindCount = 0;

// Allocate image object (both renderable and sampleable)
const VkImageCreateInfo sparseImageInfo =
{
    VK_STRUCTURE_TYPE_IMAGE_CREATE_INFO,        // sType
    NULL,                                       // pNext
    VK_IMAGE_CREATE_SPARSE_RESIDENCY_BIT | ..., // flags
    ...
    VK_FORMAT_R8G8B8A8_UNORM,                   // format
    ...
    MY_IMAGE_ARRAY_SIZE,                        // arrayLayers
    ...
    VK_IMAGE_USAGE_COLOR_ATTACHMENT_BIT |
    VK_IMAGE_USAGE_SAMPLED_BIT,                 // usage
    ...
};
vkCreateImage(device, &sparseImageInfo, &sparseImage);

// Get memory requirements
vkGetImageMemoryRequirements(
    device,
    sparseImage,
    &memoryRequirements);

// Get sparse image aspect properties
vkGetImageSparseMemoryRequirements(
    device,
    sparseImage,
    &sparseRequirementsCount,
    NULL);

pSparseReqs = (VkSparseImageMemoryRequirements*)
    malloc(sparseRequirementsCount * sizeof(VkSparseImageMemoryRequirements));

vkGetImageSparseMemoryRequirements(
    device,
    sparseImage,
    &sparseRequirementsCount,
    pSparseReqs);

// Bind LOD level 0 and any required metadata to memory
for (uint32_t i = 0; i < sparseRequirementsCount; ++i)
{
    if (pSparseReqs[i].formatProperties.aspectMask &
        VK_IMAGE_ASPECT_METADATA_BIT)
    {
        // Metadata must not be combined with other aspects
        assert(pSparseReqs[i].formatProperties.aspectMask ==
               VK_IMAGE_ASPECT_METADATA_BIT);

        if (pSparseReqs[i].formatProperties.flags &
            VK_SPARSE_IMAGE_FORMAT_SINGLE_MIPTAIL_BIT)
        {
            VkSparseMemoryBind* pBind = &binds[bindCount];
            pBind->memorySize = pSparseReqs[i].imageMipTailSize;
            bindCount++;

            // ... Allocate memory range

            pBind->resourceOffset = pSparseReqs[i].imageMipTailOffset;
            pBind->memoryOffset = /* allocated memoryOffset */;
            pBind->memory = /* allocated memory */;
            pBind->flags = VK_SPARSE_MEMORY_BIND_METADATA_BIT;

        }
        else
        {
            // Need a mip tail region per array layer.
            for (uint32_t a = 0; a < sparseImageInfo.arrayLayers; ++a)
            {
                VkSparseMemoryBind* pBind = &binds[bindCount];
                pBind->memorySize = pSparseReqs[i].imageMipTailSize;
                bindCount++;

                // ... Allocate memory range

                pBind->resourceOffset = pSparseReqs[i].imageMipTailOffset +
                                        (a * pSparseReqs[i].imageMipTailStride);

                pBind->memoryOffset = /* allocated memoryOffset */;
                pBind->memory = /* allocated memory */
                pBind->flags = VK_SPARSE_MEMORY_BIND_METADATA_BIT;
            }
        }
    }
    else
    {
        // resource data
        VkExtent3D lod0BlockSize =
        {
            AlignedDivide(
                sparseImageInfo.extent.width,
                pSparseReqs[i].formatProperties.imageGranularity.width);
            AlignedDivide(
                sparseImageInfo.extent.height,
                pSparseReqs[i].formatProperties.imageGranularity.height);
            AlignedDivide(
                sparseImageInfo.extent.depth,
                pSparseReqs[i].formatProperties.imageGranularity.depth);
        }
        size_t totalBlocks =
            lod0BlockSize.width *
            lod0BlockSize.height *
            lod0BlockSize.depth;

        VkDeviceSize lod0MemSize = totalBlocks * memoryRequirements.alignment;

        // Allocate memory for each array layer
        for (uint32_t a = 0; a < sparseImageInfo.arrayLayers; ++a)
        {
            // ... Allocate memory range

            VkSparseImageMemoryBind* pBind = &imageBinds[a];
            pBind->subresource.aspectMask = pSparseReqs[i].formatProperties.aspectMask;
            pBind->subresource.mipLevel = 0;
            pBind->subresource.arrayLayer = a;

            pBind->offset = (VkOffset3D){0, 0, 0};
            pBind->extent = sparseImageInfo.extent;
            pBind->memoryOffset = /* allocated memoryOffset */;
            pBind->memory = /* allocated memory */;
            pBind->flags = 0;
        }
    }

    free(pSparseReqs);
}

const VkSparseImageOpaqueMemoryBindInfo opaqueBindInfo =
{
    sparseImage,                                // image
    bindCount,                                  // bindCount
    binds                                       // pBinds
};

const VkSparseImageMemoryBindInfo imageBindInfo =
{
    sparseImage,                                // image
    sparseImageInfo.arrayLayers,                // bindCount
    imageBinds                                  // pBinds
};

const VkBindSparseInfo bindSparseInfo =
{
    VK_STRUCTURE_TYPE_BIND_SPARSE_INFO,         // sType
    NULL,                                       // pNext
    ...
    1,                                          // imageOpaqueBindCount
    &opaqueBindInfo,                            // pImageOpaqueBinds
    1,                                          // imageBindCount
    &imageBindInfo,                             // pImageBinds
    ...
};

// vkQueueBindSparse is application synchronized per queue object.
AcquireQueueOwnership(queue);

// Actually bind memory
vkQueueBindSparse(queue, 1, &bindSparseInfo, VK_NULL_HANDLE);

ReleaseQueueOwnership(queue);
---------------------------------------------------