2016-09-17 04:22:17 +00:00
|
|
|
// Copyright (c) 2014-2016 The Khronos Group Inc.
|
|
|
|
// Copyright notice at https://www.khronos.org/registry/speccopyright.html
|
|
|
|
|
2016-08-28 10:47:19 +00:00
|
|
|
[[wsi]]
|
|
|
|
= Window System Integration (WSI)
|
|
|
|
|
|
|
|
This chapter discusses the window system integration (WSI) between the
|
Change log for September 23, 2016 Vulkan 1.0.28 spec update:
* Bump API patch number and header version number to 28 for this update.
Github Issues:
* Minor spelling and typography cleanup, add definitions of
ename:VK_FALSE and ename:VK_TRUE as just what their names say
(public issues 220, 318, 325, 365; internal issues 451, 496)
* Clarify that the pname:maxDescriptorSet limits in the
<<features-limits-required,Required Limits>> table are n *
maxPerStage limit (where n=number of supported stages) (public issue
254).
* Minor cleanup to <<boilerplate-platform-macros,Platform-Specific
Macro Definitions>> appendix (public issue 314).
* Add valid usage statement to slink:VkPipelineLayoutCreateInfo
disallowing multiple push constant ranges for the same shader stage
(public issue 340).
* Clarify the elink:VkSharingMode description of what executing the
"same" barriers means in case of ownership transfer (public issue
347).
* Rename copyright.txt and add COPYING.md to try and reduce confusion
about applicable copyrights (public issue 350).
* Extend the table in the <<boilerplate-wsi-header, Window System-Specific
Header Control>> section to describe the external headers included when
each etext:VK_USE_PLATFORM_* macro is defined (public issue 376).
Internal Issues:
* Add "Revision History" to the PDF outputs following the table of
contents, to match HTML outputs (internal issue 43).
* Clarified that flink:vkMapMemory may fail due to virtual address
space limitations (internal issue 346).
* Add +refBody+ comment markup for ref page autoextraction when required
(internal issue 400).
* Document proper use of "mipmap" and "mip" in the style guide API
naming rules, matching the spelling rules (internal issue 471).
* Tweak the <<extensions,Layers and Extensions>> appendix to note that
the Specification may be built with arbitrary combinations of
extensions (internal issue 483).
* Remove incorrect statement allowing
slink:VkClearAttachment::pname:colorAttachment to be >=
slink:VkSubpassDescription::pname:colorAttachmentCount (internal
issue 488).
* The <<features-limits-viewportboundsrange,viewportBoundsRange>> is
expressed in terms of the pname:maxViewportDimensions but this is
actually two values. Clarify that it's based on the larger of the two
(if they differ) (internal issue 499).
Other Issues:
* Reflowed text of the entire spec using the 'reflow' Makefile gater,
to (hopefully) reduce future internal git churn as edits are made
and extensions added in return for one-time pain. This has no
perceptible change on the spec outputs but considerable changes on
the asciidoc source (internal issue 367).
2016-09-24 07:58:11 +00:00
|
|
|
Vulkan API and the various forms of displaying the results of rendering to a
|
|
|
|
user.
|
|
|
|
Since the Vulkan API can: be used without displaying results, WSI is
|
|
|
|
provided through the use of optional Vulkan extensions.
|
|
|
|
This chapter provides an overview of WSI.
|
|
|
|
See the appendix for additional details of each WSI extension, including
|
|
|
|
which extensions must: be enabled in order to use each of the functions
|
|
|
|
described in this chapter.
|
2016-08-28 10:47:19 +00:00
|
|
|
|
|
|
|
|
|
|
|
== WSI Platform
|
|
|
|
|
Change log for September 23, 2016 Vulkan 1.0.28 spec update:
* Bump API patch number and header version number to 28 for this update.
Github Issues:
* Minor spelling and typography cleanup, add definitions of
ename:VK_FALSE and ename:VK_TRUE as just what their names say
(public issues 220, 318, 325, 365; internal issues 451, 496)
* Clarify that the pname:maxDescriptorSet limits in the
<<features-limits-required,Required Limits>> table are n *
maxPerStage limit (where n=number of supported stages) (public issue
254).
* Minor cleanup to <<boilerplate-platform-macros,Platform-Specific
Macro Definitions>> appendix (public issue 314).
* Add valid usage statement to slink:VkPipelineLayoutCreateInfo
disallowing multiple push constant ranges for the same shader stage
(public issue 340).
* Clarify the elink:VkSharingMode description of what executing the
"same" barriers means in case of ownership transfer (public issue
347).
* Rename copyright.txt and add COPYING.md to try and reduce confusion
about applicable copyrights (public issue 350).
* Extend the table in the <<boilerplate-wsi-header, Window System-Specific
Header Control>> section to describe the external headers included when
each etext:VK_USE_PLATFORM_* macro is defined (public issue 376).
Internal Issues:
* Add "Revision History" to the PDF outputs following the table of
contents, to match HTML outputs (internal issue 43).
* Clarified that flink:vkMapMemory may fail due to virtual address
space limitations (internal issue 346).
* Add +refBody+ comment markup for ref page autoextraction when required
(internal issue 400).
* Document proper use of "mipmap" and "mip" in the style guide API
naming rules, matching the spelling rules (internal issue 471).
* Tweak the <<extensions,Layers and Extensions>> appendix to note that
the Specification may be built with arbitrary combinations of
extensions (internal issue 483).
* Remove incorrect statement allowing
slink:VkClearAttachment::pname:colorAttachment to be >=
slink:VkSubpassDescription::pname:colorAttachmentCount (internal
issue 488).
* The <<features-limits-viewportboundsrange,viewportBoundsRange>> is
expressed in terms of the pname:maxViewportDimensions but this is
actually two values. Clarify that it's based on the larger of the two
(if they differ) (internal issue 499).
Other Issues:
* Reflowed text of the entire spec using the 'reflow' Makefile gater,
to (hopefully) reduce future internal git churn as edits are made
and extensions added in return for one-time pain. This has no
perceptible change on the spec outputs but considerable changes on
the asciidoc source (internal issue 367).
2016-09-24 07:58:11 +00:00
|
|
|
A platform is an abstraction for a window system, OS, etc.
|
|
|
|
Some examples include MS Windows, Android, and Wayland.
|
|
|
|
The Vulkan API may: be integrated in a unique manner for each platform.
|
2016-08-28 10:47:19 +00:00
|
|
|
|
|
|
|
The Vulkan API does not define any type of platform object.
|
|
|
|
Platform-specific WSI extensions are defined, which contain
|
Change log for September 23, 2016 Vulkan 1.0.28 spec update:
* Bump API patch number and header version number to 28 for this update.
Github Issues:
* Minor spelling and typography cleanup, add definitions of
ename:VK_FALSE and ename:VK_TRUE as just what their names say
(public issues 220, 318, 325, 365; internal issues 451, 496)
* Clarify that the pname:maxDescriptorSet limits in the
<<features-limits-required,Required Limits>> table are n *
maxPerStage limit (where n=number of supported stages) (public issue
254).
* Minor cleanup to <<boilerplate-platform-macros,Platform-Specific
Macro Definitions>> appendix (public issue 314).
* Add valid usage statement to slink:VkPipelineLayoutCreateInfo
disallowing multiple push constant ranges for the same shader stage
(public issue 340).
* Clarify the elink:VkSharingMode description of what executing the
"same" barriers means in case of ownership transfer (public issue
347).
* Rename copyright.txt and add COPYING.md to try and reduce confusion
about applicable copyrights (public issue 350).
* Extend the table in the <<boilerplate-wsi-header, Window System-Specific
Header Control>> section to describe the external headers included when
each etext:VK_USE_PLATFORM_* macro is defined (public issue 376).
Internal Issues:
* Add "Revision History" to the PDF outputs following the table of
contents, to match HTML outputs (internal issue 43).
* Clarified that flink:vkMapMemory may fail due to virtual address
space limitations (internal issue 346).
* Add +refBody+ comment markup for ref page autoextraction when required
(internal issue 400).
* Document proper use of "mipmap" and "mip" in the style guide API
naming rules, matching the spelling rules (internal issue 471).
* Tweak the <<extensions,Layers and Extensions>> appendix to note that
the Specification may be built with arbitrary combinations of
extensions (internal issue 483).
* Remove incorrect statement allowing
slink:VkClearAttachment::pname:colorAttachment to be >=
slink:VkSubpassDescription::pname:colorAttachmentCount (internal
issue 488).
* The <<features-limits-viewportboundsrange,viewportBoundsRange>> is
expressed in terms of the pname:maxViewportDimensions but this is
actually two values. Clarify that it's based on the larger of the two
(if they differ) (internal issue 499).
Other Issues:
* Reflowed text of the entire spec using the 'reflow' Makefile gater,
to (hopefully) reduce future internal git churn as edits are made
and extensions added in return for one-time pain. This has no
perceptible change on the spec outputs but considerable changes on
the asciidoc source (internal issue 367).
2016-09-24 07:58:11 +00:00
|
|
|
platform-specific functions for using WSI.
|
|
|
|
Use of these extensions is guarded by preprocessor symbols as defined in the
|
|
|
|
<<boilerplate-wsi-header,Window System-Specific Header Control>> appendix.
|
2016-08-28 10:47:19 +00:00
|
|
|
|
|
|
|
In order for an application to be compiled to use WSI with a given platform,
|
Change log for September 6, 2016 Vulkan 1.0.26 spec update:
* Bump API patch number and header version number to 26 for this update.
Github Issues:
* Bring sample code in the +VK_KHR_surface+ and +VK_KHR_swapchain+
extension summary appendices up to date, and note they will be replaced
with pointers to the LunarG SDK examples in the future (public issue
279).
* Add a new <<fundamentals-commandsyntax-results-lifetime,Lifetime of
Retrieved Results>> section specifying that ftext:vkGet* and
ftext:VkEnumerate* results are invariant unless otherwise specified, and
specify behavior for individual commands which are not invariant (public
issue 280).
* Remove conflicting definition of
slink:VkDisplayPlaneCapabilitiesKHR::pname:maxSrcPosition and clean up
language of the remaining definition (public issue 351).
* Fix many minor spelling errors and add rules to the style guide to
prevent recurrences (public issue 352).
Internal Issues:
* Remove redundant descriptions of the etext:VK_USE_PLATFORM_* macros from
the <<wsi,Window System Integration>> chapter in favor of the
description in the <<boilerplate-wsi-header,Window System-Specific
Header Control>> appendix (internal issue 6).
* Replace misleading 'can: be destroyed when not X' with more correct
'must: not be destroyed while X' in the
<<fundamentals-objectmodel-lifetime,Object Lifetime>> section. Disallow
destroying a pipeline layout while a command buffer using it is
recording (internal issue 241).
* Clarify that ename:VK_IMAGE_USAGE_TRANSIENT_ATTACHMENT_BIT is valid for
all images used as attachments in elink:VkImageUsageFlagBits and the
slink:VkImageLayout validity language (internal issue 320).
* Note that <<extended-functionality-layers,Layers>> may wrap object
handles, but that this is a generally discouraged. A link to additional
information in the documentation for layer authors is provided (issue
398)
* Replace the mustnot: and shouldnot: macros with equivalent must: not and
should: not to get rid of non-English words while still highlighting
normative language (internal issue 407).
* Disallow creating multisampled images with
ename:VK_IMAGE_CREATE_CUBE_COMPATIBLE_BIT in the slink:VkImageLayout
validity language and the <<features-supported-sample-counts,Supported
Sample Counts>> section (internal issue 445).
* Fix typo so that flink:vkCmdDrawIndexedIndirect is defined in terms of
flink:vkCmdDrawIndexed rather than flink:vkCmdDrawIndirect (internal
issue 446).
* Reorganize the per-extension information sections to all be in the
<<extensions,Layers & Extensions>> appendix. Also fix a typo in
+VK_IMG_filter_cubic+ which incorrectly identified it as a +KHR+
extension (internal issue 461).
Other Issues:
* Use asciidoc markup instead of latexmath to simplify diagrams in the
<<features-formats-non-packed,byte mapping tables>> for color formats.
* Fix a markup problem with the wildcarded enumerant names in a NOTE in
the <<textures-texel-replacement,Texel Replacement>> section.
* Fix missing attributes in the XML interface for
elink:VkExternalMemoryHandleTypeFlagBitsNV and
elink:VkExternalMemoryFeatureFlagBitsNV (KhronosGroup/Vulkan-Hpp issue
#25)
* Cleanup reference page builds so only core pages are built for releases.
2016-09-06 13:17:27 +00:00
|
|
|
it must: #define the appropriate preprocessor symbol prior to including the
|
Change log for September 23, 2016 Vulkan 1.0.28 spec update:
* Bump API patch number and header version number to 28 for this update.
Github Issues:
* Minor spelling and typography cleanup, add definitions of
ename:VK_FALSE and ename:VK_TRUE as just what their names say
(public issues 220, 318, 325, 365; internal issues 451, 496)
* Clarify that the pname:maxDescriptorSet limits in the
<<features-limits-required,Required Limits>> table are n *
maxPerStage limit (where n=number of supported stages) (public issue
254).
* Minor cleanup to <<boilerplate-platform-macros,Platform-Specific
Macro Definitions>> appendix (public issue 314).
* Add valid usage statement to slink:VkPipelineLayoutCreateInfo
disallowing multiple push constant ranges for the same shader stage
(public issue 340).
* Clarify the elink:VkSharingMode description of what executing the
"same" barriers means in case of ownership transfer (public issue
347).
* Rename copyright.txt and add COPYING.md to try and reduce confusion
about applicable copyrights (public issue 350).
* Extend the table in the <<boilerplate-wsi-header, Window System-Specific
Header Control>> section to describe the external headers included when
each etext:VK_USE_PLATFORM_* macro is defined (public issue 376).
Internal Issues:
* Add "Revision History" to the PDF outputs following the table of
contents, to match HTML outputs (internal issue 43).
* Clarified that flink:vkMapMemory may fail due to virtual address
space limitations (internal issue 346).
* Add +refBody+ comment markup for ref page autoextraction when required
(internal issue 400).
* Document proper use of "mipmap" and "mip" in the style guide API
naming rules, matching the spelling rules (internal issue 471).
* Tweak the <<extensions,Layers and Extensions>> appendix to note that
the Specification may be built with arbitrary combinations of
extensions (internal issue 483).
* Remove incorrect statement allowing
slink:VkClearAttachment::pname:colorAttachment to be >=
slink:VkSubpassDescription::pname:colorAttachmentCount (internal
issue 488).
* The <<features-limits-viewportboundsrange,viewportBoundsRange>> is
expressed in terms of the pname:maxViewportDimensions but this is
actually two values. Clarify that it's based on the larger of the two
(if they differ) (internal issue 499).
Other Issues:
* Reflowed text of the entire spec using the 'reflow' Makefile gater,
to (hopefully) reduce future internal git churn as edits are made
and extensions added in return for one-time pain. This has no
perceptible change on the spec outputs but considerable changes on
the asciidoc source (internal issue 367).
2016-09-24 07:58:11 +00:00
|
|
|
"vulkan.h" header file.
|
|
|
|
Each platform-specific extension is an instance extension.
|
|
|
|
The application must: enable instance extensions with fname:vkCreateInstance
|
|
|
|
before using them.
|
2016-08-28 10:47:19 +00:00
|
|
|
|
|
|
|
|
|
|
|
== WSI Surface
|
|
|
|
|
|
|
|
A sname:VkSurfaceKHR object abstracts a native platform surface or window
|
Change log for September 23, 2016 Vulkan 1.0.28 spec update:
* Bump API patch number and header version number to 28 for this update.
Github Issues:
* Minor spelling and typography cleanup, add definitions of
ename:VK_FALSE and ename:VK_TRUE as just what their names say
(public issues 220, 318, 325, 365; internal issues 451, 496)
* Clarify that the pname:maxDescriptorSet limits in the
<<features-limits-required,Required Limits>> table are n *
maxPerStage limit (where n=number of supported stages) (public issue
254).
* Minor cleanup to <<boilerplate-platform-macros,Platform-Specific
Macro Definitions>> appendix (public issue 314).
* Add valid usage statement to slink:VkPipelineLayoutCreateInfo
disallowing multiple push constant ranges for the same shader stage
(public issue 340).
* Clarify the elink:VkSharingMode description of what executing the
"same" barriers means in case of ownership transfer (public issue
347).
* Rename copyright.txt and add COPYING.md to try and reduce confusion
about applicable copyrights (public issue 350).
* Extend the table in the <<boilerplate-wsi-header, Window System-Specific
Header Control>> section to describe the external headers included when
each etext:VK_USE_PLATFORM_* macro is defined (public issue 376).
Internal Issues:
* Add "Revision History" to the PDF outputs following the table of
contents, to match HTML outputs (internal issue 43).
* Clarified that flink:vkMapMemory may fail due to virtual address
space limitations (internal issue 346).
* Add +refBody+ comment markup for ref page autoextraction when required
(internal issue 400).
* Document proper use of "mipmap" and "mip" in the style guide API
naming rules, matching the spelling rules (internal issue 471).
* Tweak the <<extensions,Layers and Extensions>> appendix to note that
the Specification may be built with arbitrary combinations of
extensions (internal issue 483).
* Remove incorrect statement allowing
slink:VkClearAttachment::pname:colorAttachment to be >=
slink:VkSubpassDescription::pname:colorAttachmentCount (internal
issue 488).
* The <<features-limits-viewportboundsrange,viewportBoundsRange>> is
expressed in terms of the pname:maxViewportDimensions but this is
actually two values. Clarify that it's based on the larger of the two
(if they differ) (internal issue 499).
Other Issues:
* Reflowed text of the entire spec using the 'reflow' Makefile gater,
to (hopefully) reduce future internal git churn as edits are made
and extensions added in return for one-time pain. This has no
perceptible change on the spec outputs but considerable changes on
the asciidoc source (internal issue 367).
2016-09-24 07:58:11 +00:00
|
|
|
object for use with Vulkan.
|
|
|
|
The +VK_KHR_surface extension+ declares the sname:VkSurfaceKHR object, and
|
|
|
|
provides a function for destroying sname:VkSurfaceKHR objects.
|
|
|
|
Separate platform-specific extensions each provide a function for creating a
|
|
|
|
sname:VkSurfaceKHR object for the respective platform.
|
|
|
|
From the application's perspective this is an opaque handle, just like the
|
|
|
|
handles of other Vulkan objects.
|
2016-08-28 10:47:19 +00:00
|
|
|
|
|
|
|
ifdef::implementation-guide[]
|
|
|
|
[NOTE]
|
|
|
|
.Note
|
|
|
|
====
|
Change log for September 23, 2016 Vulkan 1.0.28 spec update:
* Bump API patch number and header version number to 28 for this update.
Github Issues:
* Minor spelling and typography cleanup, add definitions of
ename:VK_FALSE and ename:VK_TRUE as just what their names say
(public issues 220, 318, 325, 365; internal issues 451, 496)
* Clarify that the pname:maxDescriptorSet limits in the
<<features-limits-required,Required Limits>> table are n *
maxPerStage limit (where n=number of supported stages) (public issue
254).
* Minor cleanup to <<boilerplate-platform-macros,Platform-Specific
Macro Definitions>> appendix (public issue 314).
* Add valid usage statement to slink:VkPipelineLayoutCreateInfo
disallowing multiple push constant ranges for the same shader stage
(public issue 340).
* Clarify the elink:VkSharingMode description of what executing the
"same" barriers means in case of ownership transfer (public issue
347).
* Rename copyright.txt and add COPYING.md to try and reduce confusion
about applicable copyrights (public issue 350).
* Extend the table in the <<boilerplate-wsi-header, Window System-Specific
Header Control>> section to describe the external headers included when
each etext:VK_USE_PLATFORM_* macro is defined (public issue 376).
Internal Issues:
* Add "Revision History" to the PDF outputs following the table of
contents, to match HTML outputs (internal issue 43).
* Clarified that flink:vkMapMemory may fail due to virtual address
space limitations (internal issue 346).
* Add +refBody+ comment markup for ref page autoextraction when required
(internal issue 400).
* Document proper use of "mipmap" and "mip" in the style guide API
naming rules, matching the spelling rules (internal issue 471).
* Tweak the <<extensions,Layers and Extensions>> appendix to note that
the Specification may be built with arbitrary combinations of
extensions (internal issue 483).
* Remove incorrect statement allowing
slink:VkClearAttachment::pname:colorAttachment to be >=
slink:VkSubpassDescription::pname:colorAttachmentCount (internal
issue 488).
* The <<features-limits-viewportboundsrange,viewportBoundsRange>> is
expressed in terms of the pname:maxViewportDimensions but this is
actually two values. Clarify that it's based on the larger of the two
(if they differ) (internal issue 499).
Other Issues:
* Reflowed text of the entire spec using the 'reflow' Makefile gater,
to (hopefully) reduce future internal git churn as edits are made
and extensions added in return for one-time pain. This has no
perceptible change on the spec outputs but considerable changes on
the asciidoc source (internal issue 367).
2016-09-24 07:58:11 +00:00
|
|
|
On certain platforms, the Vulkan loader and ICDs may: have conventions that
|
|
|
|
treat the handle as a pointer to a struct that contains the
|
|
|
|
platform-specific information about the surface.
|
|
|
|
This will be described in the documentation for the loader-ICD interface,
|
|
|
|
and in the "vk_icd.h" header file of the LoaderAndTools source-code
|
|
|
|
repository.
|
2016-08-28 10:47:19 +00:00
|
|
|
This does not affect the loader-layer interface; layers may: wrap
|
|
|
|
sname:VkSurfaceKHR objects.
|
|
|
|
====
|
|
|
|
|
|
|
|
ifdef::editing-notes[]
|
|
|
|
[NOTE]
|
|
|
|
.editing-note
|
|
|
|
====
|
|
|
|
TODO: Consider replacing the above note editing note with a pointer to the
|
Change log for September 23, 2016 Vulkan 1.0.28 spec update:
* Bump API patch number and header version number to 28 for this update.
Github Issues:
* Minor spelling and typography cleanup, add definitions of
ename:VK_FALSE and ename:VK_TRUE as just what their names say
(public issues 220, 318, 325, 365; internal issues 451, 496)
* Clarify that the pname:maxDescriptorSet limits in the
<<features-limits-required,Required Limits>> table are n *
maxPerStage limit (where n=number of supported stages) (public issue
254).
* Minor cleanup to <<boilerplate-platform-macros,Platform-Specific
Macro Definitions>> appendix (public issue 314).
* Add valid usage statement to slink:VkPipelineLayoutCreateInfo
disallowing multiple push constant ranges for the same shader stage
(public issue 340).
* Clarify the elink:VkSharingMode description of what executing the
"same" barriers means in case of ownership transfer (public issue
347).
* Rename copyright.txt and add COPYING.md to try and reduce confusion
about applicable copyrights (public issue 350).
* Extend the table in the <<boilerplate-wsi-header, Window System-Specific
Header Control>> section to describe the external headers included when
each etext:VK_USE_PLATFORM_* macro is defined (public issue 376).
Internal Issues:
* Add "Revision History" to the PDF outputs following the table of
contents, to match HTML outputs (internal issue 43).
* Clarified that flink:vkMapMemory may fail due to virtual address
space limitations (internal issue 346).
* Add +refBody+ comment markup for ref page autoextraction when required
(internal issue 400).
* Document proper use of "mipmap" and "mip" in the style guide API
naming rules, matching the spelling rules (internal issue 471).
* Tweak the <<extensions,Layers and Extensions>> appendix to note that
the Specification may be built with arbitrary combinations of
extensions (internal issue 483).
* Remove incorrect statement allowing
slink:VkClearAttachment::pname:colorAttachment to be >=
slink:VkSubpassDescription::pname:colorAttachmentCount (internal
issue 488).
* The <<features-limits-viewportboundsrange,viewportBoundsRange>> is
expressed in terms of the pname:maxViewportDimensions but this is
actually two values. Clarify that it's based on the larger of the two
(if they differ) (internal issue 499).
Other Issues:
* Reflowed text of the entire spec using the 'reflow' Makefile gater,
to (hopefully) reduce future internal git churn as edits are made
and extensions added in return for one-time pain. This has no
perceptible change on the spec outputs but considerable changes on
the asciidoc source (internal issue 367).
2016-09-24 07:58:11 +00:00
|
|
|
loader spec when it exists.
|
|
|
|
However, the information is not relevant to users of the API nor does it
|
|
|
|
affect conformance of a Vulkan implementation to this spec.
|
2016-08-28 10:47:19 +00:00
|
|
|
====
|
|
|
|
endif::editing-notes[]
|
|
|
|
endif::implementation-guide[]
|
|
|
|
|
|
|
|
ifdef::VK_KHR_android_surface[]
|
|
|
|
include::../VK_KHR_android_surface/platformCreateSurface_android.txt[]
|
|
|
|
endif::VK_KHR_android_surface[]
|
|
|
|
|
|
|
|
ifdef::VK_KHR_mir_surface[]
|
|
|
|
include::../VK_KHR_mir_surface/platformCreateSurface_mir.txt[]
|
|
|
|
endif::VK_KHR_mir_surface[]
|
|
|
|
|
|
|
|
ifdef::VK_KHR_wayland_surface[]
|
|
|
|
include::../VK_KHR_wayland_surface/platformCreateSurface_wayland.txt[]
|
|
|
|
endif::VK_KHR_wayland_surface[]
|
|
|
|
|
|
|
|
ifdef::VK_KHR_win32_surface[]
|
|
|
|
include::../VK_KHR_win32_surface/platformCreateSurface_win32.txt[]
|
|
|
|
endif::VK_KHR_win32_surface[]
|
|
|
|
|
|
|
|
ifdef::VK_KHR_xcb_surface[]
|
|
|
|
include::../VK_KHR_xcb_surface/platformCreateSurface_xcb.txt[]
|
|
|
|
endif::VK_KHR_xcb_surface[]
|
|
|
|
|
|
|
|
ifdef::VK_KHR_xlib_surface[]
|
|
|
|
include::../VK_KHR_xlib_surface/platformCreateSurface_xlib.txt[]
|
|
|
|
endif::VK_KHR_xlib_surface[]
|
|
|
|
|
|
|
|
|
|
|
|
=== Platform-Independent Information
|
|
|
|
|
|
|
|
Once created, sname:VkSurfaceKHR objects can: be used in this and other
|
Change log for September 23, 2016 Vulkan 1.0.28 spec update:
* Bump API patch number and header version number to 28 for this update.
Github Issues:
* Minor spelling and typography cleanup, add definitions of
ename:VK_FALSE and ename:VK_TRUE as just what their names say
(public issues 220, 318, 325, 365; internal issues 451, 496)
* Clarify that the pname:maxDescriptorSet limits in the
<<features-limits-required,Required Limits>> table are n *
maxPerStage limit (where n=number of supported stages) (public issue
254).
* Minor cleanup to <<boilerplate-platform-macros,Platform-Specific
Macro Definitions>> appendix (public issue 314).
* Add valid usage statement to slink:VkPipelineLayoutCreateInfo
disallowing multiple push constant ranges for the same shader stage
(public issue 340).
* Clarify the elink:VkSharingMode description of what executing the
"same" barriers means in case of ownership transfer (public issue
347).
* Rename copyright.txt and add COPYING.md to try and reduce confusion
about applicable copyrights (public issue 350).
* Extend the table in the <<boilerplate-wsi-header, Window System-Specific
Header Control>> section to describe the external headers included when
each etext:VK_USE_PLATFORM_* macro is defined (public issue 376).
Internal Issues:
* Add "Revision History" to the PDF outputs following the table of
contents, to match HTML outputs (internal issue 43).
* Clarified that flink:vkMapMemory may fail due to virtual address
space limitations (internal issue 346).
* Add +refBody+ comment markup for ref page autoextraction when required
(internal issue 400).
* Document proper use of "mipmap" and "mip" in the style guide API
naming rules, matching the spelling rules (internal issue 471).
* Tweak the <<extensions,Layers and Extensions>> appendix to note that
the Specification may be built with arbitrary combinations of
extensions (internal issue 483).
* Remove incorrect statement allowing
slink:VkClearAttachment::pname:colorAttachment to be >=
slink:VkSubpassDescription::pname:colorAttachmentCount (internal
issue 488).
* The <<features-limits-viewportboundsrange,viewportBoundsRange>> is
expressed in terms of the pname:maxViewportDimensions but this is
actually two values. Clarify that it's based on the larger of the two
(if they differ) (internal issue 499).
Other Issues:
* Reflowed text of the entire spec using the 'reflow' Makefile gater,
to (hopefully) reduce future internal git churn as edits are made
and extensions added in return for one-time pain. This has no
perceptible change on the spec outputs but considerable changes on
the asciidoc source (internal issue 367).
2016-09-24 07:58:11 +00:00
|
|
|
extensions, in particular the +VK_KHR_swapchain+ extension.
|
2016-08-28 10:47:19 +00:00
|
|
|
|
|
|
|
Several WSI functions return ename:VK_ERROR_SURFACE_LOST_KHR if the surface
|
Change log for September 23, 2016 Vulkan 1.0.28 spec update:
* Bump API patch number and header version number to 28 for this update.
Github Issues:
* Minor spelling and typography cleanup, add definitions of
ename:VK_FALSE and ename:VK_TRUE as just what their names say
(public issues 220, 318, 325, 365; internal issues 451, 496)
* Clarify that the pname:maxDescriptorSet limits in the
<<features-limits-required,Required Limits>> table are n *
maxPerStage limit (where n=number of supported stages) (public issue
254).
* Minor cleanup to <<boilerplate-platform-macros,Platform-Specific
Macro Definitions>> appendix (public issue 314).
* Add valid usage statement to slink:VkPipelineLayoutCreateInfo
disallowing multiple push constant ranges for the same shader stage
(public issue 340).
* Clarify the elink:VkSharingMode description of what executing the
"same" barriers means in case of ownership transfer (public issue
347).
* Rename copyright.txt and add COPYING.md to try and reduce confusion
about applicable copyrights (public issue 350).
* Extend the table in the <<boilerplate-wsi-header, Window System-Specific
Header Control>> section to describe the external headers included when
each etext:VK_USE_PLATFORM_* macro is defined (public issue 376).
Internal Issues:
* Add "Revision History" to the PDF outputs following the table of
contents, to match HTML outputs (internal issue 43).
* Clarified that flink:vkMapMemory may fail due to virtual address
space limitations (internal issue 346).
* Add +refBody+ comment markup for ref page autoextraction when required
(internal issue 400).
* Document proper use of "mipmap" and "mip" in the style guide API
naming rules, matching the spelling rules (internal issue 471).
* Tweak the <<extensions,Layers and Extensions>> appendix to note that
the Specification may be built with arbitrary combinations of
extensions (internal issue 483).
* Remove incorrect statement allowing
slink:VkClearAttachment::pname:colorAttachment to be >=
slink:VkSubpassDescription::pname:colorAttachmentCount (internal
issue 488).
* The <<features-limits-viewportboundsrange,viewportBoundsRange>> is
expressed in terms of the pname:maxViewportDimensions but this is
actually two values. Clarify that it's based on the larger of the two
(if they differ) (internal issue 499).
Other Issues:
* Reflowed text of the entire spec using the 'reflow' Makefile gater,
to (hopefully) reduce future internal git churn as edits are made
and extensions added in return for one-time pain. This has no
perceptible change on the spec outputs but considerable changes on
the asciidoc source (internal issue 367).
2016-09-24 07:58:11 +00:00
|
|
|
becomes no longer available.
|
|
|
|
After such an error, the surface (and any child swapchain, if one exists)
|
|
|
|
should: be destroyed, as there is no way to restore them to a not-lost
|
|
|
|
state.
|
|
|
|
Applications may: attempt to create a new sname:VkSurfaceKHR using the same
|
|
|
|
native platform window object, but whether such re-creation will succeed is
|
|
|
|
platform-dependent and may: depend on the reason the surface became
|
|
|
|
unavailable.
|
|
|
|
A lost surface does not otherwise cause devices to be
|
|
|
|
<<devsandqueues-lost-device,lost>>.
|
2016-08-28 10:47:19 +00:00
|
|
|
|
|
|
|
// refBegin vkDestroySurfaceKHR - Destroy a VkSurfaceKHR object
|
|
|
|
|
|
|
|
To destroy a sname:VkSurfaceKHR object, call:
|
|
|
|
|
|
|
|
include::../../api/protos/vkDestroySurfaceKHR.txt[]
|
|
|
|
|
|
|
|
* pname:instance is the instance used to create the surface.
|
|
|
|
* pname:surface is the surface to destroy.
|
|
|
|
* pname:pAllocator is the allocator used for host memory allocated for the
|
|
|
|
surface object when there is no more specific allocator available (see
|
|
|
|
<<memory-allocation,Memory Allocation>>).
|
|
|
|
|
Change log for September 23, 2016 Vulkan 1.0.28 spec update:
* Bump API patch number and header version number to 28 for this update.
Github Issues:
* Minor spelling and typography cleanup, add definitions of
ename:VK_FALSE and ename:VK_TRUE as just what their names say
(public issues 220, 318, 325, 365; internal issues 451, 496)
* Clarify that the pname:maxDescriptorSet limits in the
<<features-limits-required,Required Limits>> table are n *
maxPerStage limit (where n=number of supported stages) (public issue
254).
* Minor cleanup to <<boilerplate-platform-macros,Platform-Specific
Macro Definitions>> appendix (public issue 314).
* Add valid usage statement to slink:VkPipelineLayoutCreateInfo
disallowing multiple push constant ranges for the same shader stage
(public issue 340).
* Clarify the elink:VkSharingMode description of what executing the
"same" barriers means in case of ownership transfer (public issue
347).
* Rename copyright.txt and add COPYING.md to try and reduce confusion
about applicable copyrights (public issue 350).
* Extend the table in the <<boilerplate-wsi-header, Window System-Specific
Header Control>> section to describe the external headers included when
each etext:VK_USE_PLATFORM_* macro is defined (public issue 376).
Internal Issues:
* Add "Revision History" to the PDF outputs following the table of
contents, to match HTML outputs (internal issue 43).
* Clarified that flink:vkMapMemory may fail due to virtual address
space limitations (internal issue 346).
* Add +refBody+ comment markup for ref page autoextraction when required
(internal issue 400).
* Document proper use of "mipmap" and "mip" in the style guide API
naming rules, matching the spelling rules (internal issue 471).
* Tweak the <<extensions,Layers and Extensions>> appendix to note that
the Specification may be built with arbitrary combinations of
extensions (internal issue 483).
* Remove incorrect statement allowing
slink:VkClearAttachment::pname:colorAttachment to be >=
slink:VkSubpassDescription::pname:colorAttachmentCount (internal
issue 488).
* The <<features-limits-viewportboundsrange,viewportBoundsRange>> is
expressed in terms of the pname:maxViewportDimensions but this is
actually two values. Clarify that it's based on the larger of the two
(if they differ) (internal issue 499).
Other Issues:
* Reflowed text of the entire spec using the 'reflow' Makefile gater,
to (hopefully) reduce future internal git churn as edits are made
and extensions added in return for one-time pain. This has no
perceptible change on the spec outputs but considerable changes on
the asciidoc source (internal issue 367).
2016-09-24 07:58:11 +00:00
|
|
|
Destroying a sname:VkSurfaceKHR merely severs the connection between Vulkan
|
|
|
|
and the native surface, and does not imply destroying the native surface,
|
|
|
|
closing a window, or similar behavior.
|
2016-08-28 10:47:19 +00:00
|
|
|
|
Change log for September 30, 2016 Vulkan 1.0.29 spec update:
* Bump API patch number and header version number to 29 for this update.
Github Issues:
* Remove redundant constraint on
slink:VkCommandBufferInheritanceInfo::pname:queryFlags (public issue
224).
* Fix typo and remove link in Note in the
<<extended-functionality-instance-extensions-and-devices, Instance
Extensions and Device Extensions>> section (public issue 359).
* Fix erroneous validation statement for the pname:layout member of
slink:VkComputePipelineCreateInfo (public issue 362).
Internal Issues:
* Restore long figure captions using asciidoc sidebar blocks, due to
restrictions of asciidoc syntax (internal issue 101).
* Replace most latexmath equations with comparable markup in straight
asciidoc, which significantly improves time required to fully load and
process the HTML forms of the Specification. There are known minor font
and alignment inconsistencies with MathJax and PDF rendering of
latexmath equations. Please do not file github issues about these. We
are aware of the inconsistencies and will make refinements over time,
while the performance improvements are compelling in at least some major
browsers (internal issue 313).
* Move handcoded validity statements from +vk.xml+ into the Specification
body, easing work in the single-branch model. Specify the distinction
between these explicit statements, and the implicit validity statements
inferred from vk.xml. Validity statements now appear in two blocks for
each command and structure - handcoded "Valid Usage" and the implicit
"Valid Usage (Implicit)" (internal issue 392).
* Add the +returnedonly="false"+ attribute to WSI output structures,
removing incorrectly generated implicit validity statements for
slink:VkDisplayPropertiesKHR, slink:VkDisplayPlanePropertiesKHR,
slink:VkDisplayModePropertiesKHR, slink:VkDisplayPlaneCapabilitiesKHR,
slink:VkSurfaceCapabilitiesKHR, and slink:VkSurfaceFormatKHR structures
(internal issue 486).
* Update slink:VkImageLayout to require the
ename:VK_IMAGE_USAGE_SAMPLED_BIT be set for sampled depth/stencil images
(internal issue 487).
* Use an explicit format specifier string for the date command invocation
in the +Makefile+ instead of the shorthand -R option, which doesn't work
on BSD and MaxOS X date commands (internal issue 500).
Other Issues:
* Use the terms ``allocation scope'' and ``extension scope'' instead of
just ``scope'', and add them to the glossary.
2016-10-01 04:13:37 +00:00
|
|
|
.Valid Usage
|
|
|
|
****
|
|
|
|
* All sname:VkSwapchainKHR objects created for pname:surface must: have
|
|
|
|
been destroyed prior to destroying pname:surface
|
|
|
|
* If sname:VkAllocationCallbacks were provided when pname:surface was
|
|
|
|
created, a compatible set of callbacks must: be provided here
|
|
|
|
* If no sname:VkAllocationCallbacks were provided when pname:surface was
|
|
|
|
created, pname:pAllocator must: be `NULL`
|
|
|
|
****
|
|
|
|
|
2016-08-28 10:47:19 +00:00
|
|
|
include::../../validity/protos/vkDestroySurfaceKHR.txt[]
|
|
|
|
|
|
|
|
ifdef::VK_KHR_display[]
|
|
|
|
include::../VK_KHR_display/display.txt[]
|
|
|
|
endif::VK_KHR_display[]
|
|
|
|
|
|
|
|
|
|
|
|
== Querying for WSI Support
|
|
|
|
|
Change log for September 23, 2016 Vulkan 1.0.28 spec update:
* Bump API patch number and header version number to 28 for this update.
Github Issues:
* Minor spelling and typography cleanup, add definitions of
ename:VK_FALSE and ename:VK_TRUE as just what their names say
(public issues 220, 318, 325, 365; internal issues 451, 496)
* Clarify that the pname:maxDescriptorSet limits in the
<<features-limits-required,Required Limits>> table are n *
maxPerStage limit (where n=number of supported stages) (public issue
254).
* Minor cleanup to <<boilerplate-platform-macros,Platform-Specific
Macro Definitions>> appendix (public issue 314).
* Add valid usage statement to slink:VkPipelineLayoutCreateInfo
disallowing multiple push constant ranges for the same shader stage
(public issue 340).
* Clarify the elink:VkSharingMode description of what executing the
"same" barriers means in case of ownership transfer (public issue
347).
* Rename copyright.txt and add COPYING.md to try and reduce confusion
about applicable copyrights (public issue 350).
* Extend the table in the <<boilerplate-wsi-header, Window System-Specific
Header Control>> section to describe the external headers included when
each etext:VK_USE_PLATFORM_* macro is defined (public issue 376).
Internal Issues:
* Add "Revision History" to the PDF outputs following the table of
contents, to match HTML outputs (internal issue 43).
* Clarified that flink:vkMapMemory may fail due to virtual address
space limitations (internal issue 346).
* Add +refBody+ comment markup for ref page autoextraction when required
(internal issue 400).
* Document proper use of "mipmap" and "mip" in the style guide API
naming rules, matching the spelling rules (internal issue 471).
* Tweak the <<extensions,Layers and Extensions>> appendix to note that
the Specification may be built with arbitrary combinations of
extensions (internal issue 483).
* Remove incorrect statement allowing
slink:VkClearAttachment::pname:colorAttachment to be >=
slink:VkSubpassDescription::pname:colorAttachmentCount (internal
issue 488).
* The <<features-limits-viewportboundsrange,viewportBoundsRange>> is
expressed in terms of the pname:maxViewportDimensions but this is
actually two values. Clarify that it's based on the larger of the two
(if they differ) (internal issue 499).
Other Issues:
* Reflowed text of the entire spec using the 'reflow' Makefile gater,
to (hopefully) reduce future internal git churn as edits are made
and extensions added in return for one-time pain. This has no
perceptible change on the spec outputs but considerable changes on
the asciidoc source (internal issue 367).
2016-09-24 07:58:11 +00:00
|
|
|
Not all physical devices will include WSI support.
|
|
|
|
Within a physical device, not all queue families will support presentation.
|
|
|
|
WSI support and compatibility can: be determined in a platform-neutral
|
|
|
|
manner (which determines support for presentation to a particular surface
|
|
|
|
object) and additionally may: be determined in platform-specific manners
|
|
|
|
(which determine support for presentation on the specified physical device
|
|
|
|
but do not guarantee support for presentation to a particular surface
|
|
|
|
object).
|
2016-08-28 10:47:19 +00:00
|
|
|
|
|
|
|
// refBegin vkGetPhysicalDeviceSurfaceSupportKHR - Query if presentation is supported
|
|
|
|
|
|
|
|
To determine whether a queue family of a physical device supports
|
|
|
|
presentation to a given surface, call:
|
|
|
|
|
|
|
|
include::../../api/protos/vkGetPhysicalDeviceSurfaceSupportKHR.txt[]
|
|
|
|
|
|
|
|
* pname:physicalDevice is the physical device.
|
|
|
|
* pname:queueFamilyIndex is the queue family.
|
|
|
|
* pname:surface is the surface.
|
|
|
|
* pname:pSupported is a pointer to a basetype:VkBool32, which is set to
|
|
|
|
ename:VK_TRUE to indicate support, and ename:VK_FALSE otherwise.
|
|
|
|
|
Change log for September 30, 2016 Vulkan 1.0.29 spec update:
* Bump API patch number and header version number to 29 for this update.
Github Issues:
* Remove redundant constraint on
slink:VkCommandBufferInheritanceInfo::pname:queryFlags (public issue
224).
* Fix typo and remove link in Note in the
<<extended-functionality-instance-extensions-and-devices, Instance
Extensions and Device Extensions>> section (public issue 359).
* Fix erroneous validation statement for the pname:layout member of
slink:VkComputePipelineCreateInfo (public issue 362).
Internal Issues:
* Restore long figure captions using asciidoc sidebar blocks, due to
restrictions of asciidoc syntax (internal issue 101).
* Replace most latexmath equations with comparable markup in straight
asciidoc, which significantly improves time required to fully load and
process the HTML forms of the Specification. There are known minor font
and alignment inconsistencies with MathJax and PDF rendering of
latexmath equations. Please do not file github issues about these. We
are aware of the inconsistencies and will make refinements over time,
while the performance improvements are compelling in at least some major
browsers (internal issue 313).
* Move handcoded validity statements from +vk.xml+ into the Specification
body, easing work in the single-branch model. Specify the distinction
between these explicit statements, and the implicit validity statements
inferred from vk.xml. Validity statements now appear in two blocks for
each command and structure - handcoded "Valid Usage" and the implicit
"Valid Usage (Implicit)" (internal issue 392).
* Add the +returnedonly="false"+ attribute to WSI output structures,
removing incorrectly generated implicit validity statements for
slink:VkDisplayPropertiesKHR, slink:VkDisplayPlanePropertiesKHR,
slink:VkDisplayModePropertiesKHR, slink:VkDisplayPlaneCapabilitiesKHR,
slink:VkSurfaceCapabilitiesKHR, and slink:VkSurfaceFormatKHR structures
(internal issue 486).
* Update slink:VkImageLayout to require the
ename:VK_IMAGE_USAGE_SAMPLED_BIT be set for sampled depth/stencil images
(internal issue 487).
* Use an explicit format specifier string for the date command invocation
in the +Makefile+ instead of the shorthand -R option, which doesn't work
on BSD and MaxOS X date commands (internal issue 500).
Other Issues:
* Use the terms ``allocation scope'' and ``extension scope'' instead of
just ``scope'', and add them to the glossary.
2016-10-01 04:13:37 +00:00
|
|
|
.Valid Usage
|
|
|
|
****
|
|
|
|
* pname:queueFamilyIndex must: be less than
|
|
|
|
pname:pQueueFamilyPropertyCount returned by
|
|
|
|
fname:vkGetPhysicalDeviceQueueFamilyProperties for the given
|
|
|
|
pname:physicalDevice
|
|
|
|
****
|
|
|
|
|
2016-08-28 10:47:19 +00:00
|
|
|
include::../../validity/protos/vkGetPhysicalDeviceSurfaceSupportKHR.txt[]
|
|
|
|
|
|
|
|
ifdef::VK_KHR_android_surface[]
|
|
|
|
include::../VK_KHR_android_surface/platformQuerySupport_android.txt[]
|
|
|
|
endif::VK_KHR_android_surface[]
|
|
|
|
|
|
|
|
ifdef::VK_KHR_mir_surface[]
|
|
|
|
include::../VK_KHR_mir_surface/platformQuerySupport_mir.txt[]
|
|
|
|
endif::VK_KHR_mir_surface[]
|
|
|
|
|
|
|
|
ifdef::VK_KHR_wayland_surface[]
|
|
|
|
include::../VK_KHR_wayland_surface/platformQuerySupport_wayland.txt[]
|
|
|
|
endif::VK_KHR_wayland_surface[]
|
|
|
|
|
|
|
|
ifdef::VK_KHR_win32_surface[]
|
|
|
|
include::../VK_KHR_win32_surface/platformQuerySupport_win32.txt[]
|
|
|
|
endif::VK_KHR_win32_surface[]
|
|
|
|
|
|
|
|
ifdef::VK_KHR_xcb_surface[]
|
|
|
|
include::../VK_KHR_xcb_surface/platformQuerySupport_xcb.txt[]
|
|
|
|
endif::VK_KHR_xcb_surface[]
|
|
|
|
|
|
|
|
ifdef::VK_KHR_xlib_surface[]
|
|
|
|
include::../VK_KHR_xlib_surface/platformQuerySupport_xlib.txt[]
|
|
|
|
endif::VK_KHR_xlib_surface[]
|
|
|
|
|
|
|
|
|
|
|
|
== Surface Queries
|
|
|
|
|
|
|
|
// refBegin vkGetPhysicalDeviceSurfaceCapabilitiesKHR - Query surface capabilities
|
|
|
|
|
|
|
|
To query the basic capabilities of a surface, needed in order to create a
|
|
|
|
swapchain, call:
|
|
|
|
|
|
|
|
include::../../api/protos/vkGetPhysicalDeviceSurfaceCapabilitiesKHR.txt[]
|
|
|
|
|
|
|
|
* pname:physicalDevice is the physical device that will be associated with
|
|
|
|
the swapchain to be created, as described for
|
|
|
|
flink:vkCreateSwapchainKHR.
|
|
|
|
* pname:surface is the surface that will be associated with the swapchain.
|
|
|
|
* pname:pSurfaceCapabilities is a pointer to an instance of the
|
|
|
|
slink:VkSurfaceCapabilitiesKHR structure in which the capabilities are
|
|
|
|
returned.
|
|
|
|
|
|
|
|
include::../../validity/protos/vkGetPhysicalDeviceSurfaceCapabilitiesKHR.txt[]
|
|
|
|
|
|
|
|
// refBegin VkSurfaceCapabilitiesKHR - Structure describing capabilities of a surface
|
|
|
|
|
|
|
|
The sname:VkSurfaceCapabilitiesKHR structure is defined as:
|
|
|
|
|
|
|
|
include::../../api/structs/VkSurfaceCapabilitiesKHR.txt[]
|
|
|
|
|
|
|
|
* pname:minImageCount is the minimum number of images the specified device
|
|
|
|
supports for a swapchain created for the surface.
|
|
|
|
* pname:maxImageCount is the maximum number of images the specified device
|
Change log for September 23, 2016 Vulkan 1.0.28 spec update:
* Bump API patch number and header version number to 28 for this update.
Github Issues:
* Minor spelling and typography cleanup, add definitions of
ename:VK_FALSE and ename:VK_TRUE as just what their names say
(public issues 220, 318, 325, 365; internal issues 451, 496)
* Clarify that the pname:maxDescriptorSet limits in the
<<features-limits-required,Required Limits>> table are n *
maxPerStage limit (where n=number of supported stages) (public issue
254).
* Minor cleanup to <<boilerplate-platform-macros,Platform-Specific
Macro Definitions>> appendix (public issue 314).
* Add valid usage statement to slink:VkPipelineLayoutCreateInfo
disallowing multiple push constant ranges for the same shader stage
(public issue 340).
* Clarify the elink:VkSharingMode description of what executing the
"same" barriers means in case of ownership transfer (public issue
347).
* Rename copyright.txt and add COPYING.md to try and reduce confusion
about applicable copyrights (public issue 350).
* Extend the table in the <<boilerplate-wsi-header, Window System-Specific
Header Control>> section to describe the external headers included when
each etext:VK_USE_PLATFORM_* macro is defined (public issue 376).
Internal Issues:
* Add "Revision History" to the PDF outputs following the table of
contents, to match HTML outputs (internal issue 43).
* Clarified that flink:vkMapMemory may fail due to virtual address
space limitations (internal issue 346).
* Add +refBody+ comment markup for ref page autoextraction when required
(internal issue 400).
* Document proper use of "mipmap" and "mip" in the style guide API
naming rules, matching the spelling rules (internal issue 471).
* Tweak the <<extensions,Layers and Extensions>> appendix to note that
the Specification may be built with arbitrary combinations of
extensions (internal issue 483).
* Remove incorrect statement allowing
slink:VkClearAttachment::pname:colorAttachment to be >=
slink:VkSubpassDescription::pname:colorAttachmentCount (internal
issue 488).
* The <<features-limits-viewportboundsrange,viewportBoundsRange>> is
expressed in terms of the pname:maxViewportDimensions but this is
actually two values. Clarify that it's based on the larger of the two
(if they differ) (internal issue 499).
Other Issues:
* Reflowed text of the entire spec using the 'reflow' Makefile gater,
to (hopefully) reduce future internal git churn as edits are made
and extensions added in return for one-time pain. This has no
perceptible change on the spec outputs but considerable changes on
the asciidoc source (internal issue 367).
2016-09-24 07:58:11 +00:00
|
|
|
supports for a swapchain created for the surface.
|
|
|
|
A value of 0 means that there is no limit on the number of images,
|
|
|
|
though there may: be limits related to the total amount of memory used
|
|
|
|
by swapchain images.
|
2016-08-28 10:47:19 +00:00
|
|
|
* pname:currentExtent is the current width and height of the surface, or
|
Change log for September 30, 2016 Vulkan 1.0.29 spec update:
* Bump API patch number and header version number to 29 for this update.
Github Issues:
* Remove redundant constraint on
slink:VkCommandBufferInheritanceInfo::pname:queryFlags (public issue
224).
* Fix typo and remove link in Note in the
<<extended-functionality-instance-extensions-and-devices, Instance
Extensions and Device Extensions>> section (public issue 359).
* Fix erroneous validation statement for the pname:layout member of
slink:VkComputePipelineCreateInfo (public issue 362).
Internal Issues:
* Restore long figure captions using asciidoc sidebar blocks, due to
restrictions of asciidoc syntax (internal issue 101).
* Replace most latexmath equations with comparable markup in straight
asciidoc, which significantly improves time required to fully load and
process the HTML forms of the Specification. There are known minor font
and alignment inconsistencies with MathJax and PDF rendering of
latexmath equations. Please do not file github issues about these. We
are aware of the inconsistencies and will make refinements over time,
while the performance improvements are compelling in at least some major
browsers (internal issue 313).
* Move handcoded validity statements from +vk.xml+ into the Specification
body, easing work in the single-branch model. Specify the distinction
between these explicit statements, and the implicit validity statements
inferred from vk.xml. Validity statements now appear in two blocks for
each command and structure - handcoded "Valid Usage" and the implicit
"Valid Usage (Implicit)" (internal issue 392).
* Add the +returnedonly="false"+ attribute to WSI output structures,
removing incorrectly generated implicit validity statements for
slink:VkDisplayPropertiesKHR, slink:VkDisplayPlanePropertiesKHR,
slink:VkDisplayModePropertiesKHR, slink:VkDisplayPlaneCapabilitiesKHR,
slink:VkSurfaceCapabilitiesKHR, and slink:VkSurfaceFormatKHR structures
(internal issue 486).
* Update slink:VkImageLayout to require the
ename:VK_IMAGE_USAGE_SAMPLED_BIT be set for sampled depth/stencil images
(internal issue 487).
* Use an explicit format specifier string for the date command invocation
in the +Makefile+ instead of the shorthand -R option, which doesn't work
on BSD and MaxOS X date commands (internal issue 500).
Other Issues:
* Use the terms ``allocation scope'' and ``extension scope'' instead of
just ``scope'', and add them to the glossary.
2016-10-01 04:13:37 +00:00
|
|
|
the special value [eq]#(0xFFFFFFFF, 0xFFFFFFFF)# indicating that the
|
|
|
|
surface size will be determined by the extent of a swapchain targeting
|
|
|
|
the surface.
|
2016-08-28 10:47:19 +00:00
|
|
|
* pname:minImageExtent contains the smallest valid swapchain extent for
|
|
|
|
the surface on the specified device.
|
Change log for September 23, 2016 Vulkan 1.0.28 spec update:
* Bump API patch number and header version number to 28 for this update.
Github Issues:
* Minor spelling and typography cleanup, add definitions of
ename:VK_FALSE and ename:VK_TRUE as just what their names say
(public issues 220, 318, 325, 365; internal issues 451, 496)
* Clarify that the pname:maxDescriptorSet limits in the
<<features-limits-required,Required Limits>> table are n *
maxPerStage limit (where n=number of supported stages) (public issue
254).
* Minor cleanup to <<boilerplate-platform-macros,Platform-Specific
Macro Definitions>> appendix (public issue 314).
* Add valid usage statement to slink:VkPipelineLayoutCreateInfo
disallowing multiple push constant ranges for the same shader stage
(public issue 340).
* Clarify the elink:VkSharingMode description of what executing the
"same" barriers means in case of ownership transfer (public issue
347).
* Rename copyright.txt and add COPYING.md to try and reduce confusion
about applicable copyrights (public issue 350).
* Extend the table in the <<boilerplate-wsi-header, Window System-Specific
Header Control>> section to describe the external headers included when
each etext:VK_USE_PLATFORM_* macro is defined (public issue 376).
Internal Issues:
* Add "Revision History" to the PDF outputs following the table of
contents, to match HTML outputs (internal issue 43).
* Clarified that flink:vkMapMemory may fail due to virtual address
space limitations (internal issue 346).
* Add +refBody+ comment markup for ref page autoextraction when required
(internal issue 400).
* Document proper use of "mipmap" and "mip" in the style guide API
naming rules, matching the spelling rules (internal issue 471).
* Tweak the <<extensions,Layers and Extensions>> appendix to note that
the Specification may be built with arbitrary combinations of
extensions (internal issue 483).
* Remove incorrect statement allowing
slink:VkClearAttachment::pname:colorAttachment to be >=
slink:VkSubpassDescription::pname:colorAttachmentCount (internal
issue 488).
* The <<features-limits-viewportboundsrange,viewportBoundsRange>> is
expressed in terms of the pname:maxViewportDimensions but this is
actually two values. Clarify that it's based on the larger of the two
(if they differ) (internal issue 499).
Other Issues:
* Reflowed text of the entire spec using the 'reflow' Makefile gater,
to (hopefully) reduce future internal git churn as edits are made
and extensions added in return for one-time pain. This has no
perceptible change on the spec outputs but considerable changes on
the asciidoc source (internal issue 367).
2016-09-24 07:58:11 +00:00
|
|
|
* pname:maxImageExtent contains the largest valid swapchain extent for the
|
|
|
|
surface on the specified device.
|
2016-08-28 10:47:19 +00:00
|
|
|
* pname:maxImageArrayLayers is the maximum number of layers swapchain
|
|
|
|
images can: have for a swapchain created for this device and surface.
|
Change log for September 6, 2016 Vulkan 1.0.26 spec update:
* Bump API patch number and header version number to 26 for this update.
Github Issues:
* Bring sample code in the +VK_KHR_surface+ and +VK_KHR_swapchain+
extension summary appendices up to date, and note they will be replaced
with pointers to the LunarG SDK examples in the future (public issue
279).
* Add a new <<fundamentals-commandsyntax-results-lifetime,Lifetime of
Retrieved Results>> section specifying that ftext:vkGet* and
ftext:VkEnumerate* results are invariant unless otherwise specified, and
specify behavior for individual commands which are not invariant (public
issue 280).
* Remove conflicting definition of
slink:VkDisplayPlaneCapabilitiesKHR::pname:maxSrcPosition and clean up
language of the remaining definition (public issue 351).
* Fix many minor spelling errors and add rules to the style guide to
prevent recurrences (public issue 352).
Internal Issues:
* Remove redundant descriptions of the etext:VK_USE_PLATFORM_* macros from
the <<wsi,Window System Integration>> chapter in favor of the
description in the <<boilerplate-wsi-header,Window System-Specific
Header Control>> appendix (internal issue 6).
* Replace misleading 'can: be destroyed when not X' with more correct
'must: not be destroyed while X' in the
<<fundamentals-objectmodel-lifetime,Object Lifetime>> section. Disallow
destroying a pipeline layout while a command buffer using it is
recording (internal issue 241).
* Clarify that ename:VK_IMAGE_USAGE_TRANSIENT_ATTACHMENT_BIT is valid for
all images used as attachments in elink:VkImageUsageFlagBits and the
slink:VkImageLayout validity language (internal issue 320).
* Note that <<extended-functionality-layers,Layers>> may wrap object
handles, but that this is a generally discouraged. A link to additional
information in the documentation for layer authors is provided (issue
398)
* Replace the mustnot: and shouldnot: macros with equivalent must: not and
should: not to get rid of non-English words while still highlighting
normative language (internal issue 407).
* Disallow creating multisampled images with
ename:VK_IMAGE_CREATE_CUBE_COMPATIBLE_BIT in the slink:VkImageLayout
validity language and the <<features-supported-sample-counts,Supported
Sample Counts>> section (internal issue 445).
* Fix typo so that flink:vkCmdDrawIndexedIndirect is defined in terms of
flink:vkCmdDrawIndexed rather than flink:vkCmdDrawIndirect (internal
issue 446).
* Reorganize the per-extension information sections to all be in the
<<extensions,Layers & Extensions>> appendix. Also fix a typo in
+VK_IMG_filter_cubic+ which incorrectly identified it as a +KHR+
extension (internal issue 461).
Other Issues:
* Use asciidoc markup instead of latexmath to simplify diagrams in the
<<features-formats-non-packed,byte mapping tables>> for color formats.
* Fix a markup problem with the wildcarded enumerant names in a NOTE in
the <<textures-texel-replacement,Texel Replacement>> section.
* Fix missing attributes in the XML interface for
elink:VkExternalMemoryHandleTypeFlagBitsNV and
elink:VkExternalMemoryFeatureFlagBitsNV (KhronosGroup/Vulkan-Hpp issue
#25)
* Cleanup reference page builds so only core pages are built for releases.
2016-09-06 13:17:27 +00:00
|
|
|
* pname:supportedTransforms is a bitmask of
|
2016-08-28 10:47:19 +00:00
|
|
|
elink:VkSurfaceTransformFlagBitsKHR, describing the presentation
|
|
|
|
transforms supported for the surface on the specified device.
|
Change log for September 6, 2016 Vulkan 1.0.26 spec update:
* Bump API patch number and header version number to 26 for this update.
Github Issues:
* Bring sample code in the +VK_KHR_surface+ and +VK_KHR_swapchain+
extension summary appendices up to date, and note they will be replaced
with pointers to the LunarG SDK examples in the future (public issue
279).
* Add a new <<fundamentals-commandsyntax-results-lifetime,Lifetime of
Retrieved Results>> section specifying that ftext:vkGet* and
ftext:VkEnumerate* results are invariant unless otherwise specified, and
specify behavior for individual commands which are not invariant (public
issue 280).
* Remove conflicting definition of
slink:VkDisplayPlaneCapabilitiesKHR::pname:maxSrcPosition and clean up
language of the remaining definition (public issue 351).
* Fix many minor spelling errors and add rules to the style guide to
prevent recurrences (public issue 352).
Internal Issues:
* Remove redundant descriptions of the etext:VK_USE_PLATFORM_* macros from
the <<wsi,Window System Integration>> chapter in favor of the
description in the <<boilerplate-wsi-header,Window System-Specific
Header Control>> appendix (internal issue 6).
* Replace misleading 'can: be destroyed when not X' with more correct
'must: not be destroyed while X' in the
<<fundamentals-objectmodel-lifetime,Object Lifetime>> section. Disallow
destroying a pipeline layout while a command buffer using it is
recording (internal issue 241).
* Clarify that ename:VK_IMAGE_USAGE_TRANSIENT_ATTACHMENT_BIT is valid for
all images used as attachments in elink:VkImageUsageFlagBits and the
slink:VkImageLayout validity language (internal issue 320).
* Note that <<extended-functionality-layers,Layers>> may wrap object
handles, but that this is a generally discouraged. A link to additional
information in the documentation for layer authors is provided (issue
398)
* Replace the mustnot: and shouldnot: macros with equivalent must: not and
should: not to get rid of non-English words while still highlighting
normative language (internal issue 407).
* Disallow creating multisampled images with
ename:VK_IMAGE_CREATE_CUBE_COMPATIBLE_BIT in the slink:VkImageLayout
validity language and the <<features-supported-sample-counts,Supported
Sample Counts>> section (internal issue 445).
* Fix typo so that flink:vkCmdDrawIndexedIndirect is defined in terms of
flink:vkCmdDrawIndexed rather than flink:vkCmdDrawIndirect (internal
issue 446).
* Reorganize the per-extension information sections to all be in the
<<extensions,Layers & Extensions>> appendix. Also fix a typo in
+VK_IMG_filter_cubic+ which incorrectly identified it as a +KHR+
extension (internal issue 461).
Other Issues:
* Use asciidoc markup instead of latexmath to simplify diagrams in the
<<features-formats-non-packed,byte mapping tables>> for color formats.
* Fix a markup problem with the wildcarded enumerant names in a NOTE in
the <<textures-texel-replacement,Texel Replacement>> section.
* Fix missing attributes in the XML interface for
elink:VkExternalMemoryHandleTypeFlagBitsNV and
elink:VkExternalMemoryFeatureFlagBitsNV (KhronosGroup/Vulkan-Hpp issue
#25)
* Cleanup reference page builds so only core pages are built for releases.
2016-09-06 13:17:27 +00:00
|
|
|
* pname:currentTransform is a bitmask of
|
2016-08-28 10:47:19 +00:00
|
|
|
elink:VkSurfaceTransformFlagBitsKHR, describing the surface's current
|
|
|
|
transform relative to the presentation engine's natural orientation.
|
Change log for September 6, 2016 Vulkan 1.0.26 spec update:
* Bump API patch number and header version number to 26 for this update.
Github Issues:
* Bring sample code in the +VK_KHR_surface+ and +VK_KHR_swapchain+
extension summary appendices up to date, and note they will be replaced
with pointers to the LunarG SDK examples in the future (public issue
279).
* Add a new <<fundamentals-commandsyntax-results-lifetime,Lifetime of
Retrieved Results>> section specifying that ftext:vkGet* and
ftext:VkEnumerate* results are invariant unless otherwise specified, and
specify behavior for individual commands which are not invariant (public
issue 280).
* Remove conflicting definition of
slink:VkDisplayPlaneCapabilitiesKHR::pname:maxSrcPosition and clean up
language of the remaining definition (public issue 351).
* Fix many minor spelling errors and add rules to the style guide to
prevent recurrences (public issue 352).
Internal Issues:
* Remove redundant descriptions of the etext:VK_USE_PLATFORM_* macros from
the <<wsi,Window System Integration>> chapter in favor of the
description in the <<boilerplate-wsi-header,Window System-Specific
Header Control>> appendix (internal issue 6).
* Replace misleading 'can: be destroyed when not X' with more correct
'must: not be destroyed while X' in the
<<fundamentals-objectmodel-lifetime,Object Lifetime>> section. Disallow
destroying a pipeline layout while a command buffer using it is
recording (internal issue 241).
* Clarify that ename:VK_IMAGE_USAGE_TRANSIENT_ATTACHMENT_BIT is valid for
all images used as attachments in elink:VkImageUsageFlagBits and the
slink:VkImageLayout validity language (internal issue 320).
* Note that <<extended-functionality-layers,Layers>> may wrap object
handles, but that this is a generally discouraged. A link to additional
information in the documentation for layer authors is provided (issue
398)
* Replace the mustnot: and shouldnot: macros with equivalent must: not and
should: not to get rid of non-English words while still highlighting
normative language (internal issue 407).
* Disallow creating multisampled images with
ename:VK_IMAGE_CREATE_CUBE_COMPATIBLE_BIT in the slink:VkImageLayout
validity language and the <<features-supported-sample-counts,Supported
Sample Counts>> section (internal issue 445).
* Fix typo so that flink:vkCmdDrawIndexedIndirect is defined in terms of
flink:vkCmdDrawIndexed rather than flink:vkCmdDrawIndirect (internal
issue 446).
* Reorganize the per-extension information sections to all be in the
<<extensions,Layers & Extensions>> appendix. Also fix a typo in
+VK_IMG_filter_cubic+ which incorrectly identified it as a +KHR+
extension (internal issue 461).
Other Issues:
* Use asciidoc markup instead of latexmath to simplify diagrams in the
<<features-formats-non-packed,byte mapping tables>> for color formats.
* Fix a markup problem with the wildcarded enumerant names in a NOTE in
the <<textures-texel-replacement,Texel Replacement>> section.
* Fix missing attributes in the XML interface for
elink:VkExternalMemoryHandleTypeFlagBitsNV and
elink:VkExternalMemoryFeatureFlagBitsNV (KhronosGroup/Vulkan-Hpp issue
#25)
* Cleanup reference page builds so only core pages are built for releases.
2016-09-06 13:17:27 +00:00
|
|
|
* pname:supportedCompositeAlpha is a bitmask of
|
Change log for September 23, 2016 Vulkan 1.0.28 spec update:
* Bump API patch number and header version number to 28 for this update.
Github Issues:
* Minor spelling and typography cleanup, add definitions of
ename:VK_FALSE and ename:VK_TRUE as just what their names say
(public issues 220, 318, 325, 365; internal issues 451, 496)
* Clarify that the pname:maxDescriptorSet limits in the
<<features-limits-required,Required Limits>> table are n *
maxPerStage limit (where n=number of supported stages) (public issue
254).
* Minor cleanup to <<boilerplate-platform-macros,Platform-Specific
Macro Definitions>> appendix (public issue 314).
* Add valid usage statement to slink:VkPipelineLayoutCreateInfo
disallowing multiple push constant ranges for the same shader stage
(public issue 340).
* Clarify the elink:VkSharingMode description of what executing the
"same" barriers means in case of ownership transfer (public issue
347).
* Rename copyright.txt and add COPYING.md to try and reduce confusion
about applicable copyrights (public issue 350).
* Extend the table in the <<boilerplate-wsi-header, Window System-Specific
Header Control>> section to describe the external headers included when
each etext:VK_USE_PLATFORM_* macro is defined (public issue 376).
Internal Issues:
* Add "Revision History" to the PDF outputs following the table of
contents, to match HTML outputs (internal issue 43).
* Clarified that flink:vkMapMemory may fail due to virtual address
space limitations (internal issue 346).
* Add +refBody+ comment markup for ref page autoextraction when required
(internal issue 400).
* Document proper use of "mipmap" and "mip" in the style guide API
naming rules, matching the spelling rules (internal issue 471).
* Tweak the <<extensions,Layers and Extensions>> appendix to note that
the Specification may be built with arbitrary combinations of
extensions (internal issue 483).
* Remove incorrect statement allowing
slink:VkClearAttachment::pname:colorAttachment to be >=
slink:VkSubpassDescription::pname:colorAttachmentCount (internal
issue 488).
* The <<features-limits-viewportboundsrange,viewportBoundsRange>> is
expressed in terms of the pname:maxViewportDimensions but this is
actually two values. Clarify that it's based on the larger of the two
(if they differ) (internal issue 499).
Other Issues:
* Reflowed text of the entire spec using the 'reflow' Makefile gater,
to (hopefully) reduce future internal git churn as edits are made
and extensions added in return for one-time pain. This has no
perceptible change on the spec outputs but considerable changes on
the asciidoc source (internal issue 367).
2016-09-24 07:58:11 +00:00
|
|
|
elink:VkCompositeAlphaFlagBitsKHR, representing the alpha compositing
|
|
|
|
modes supported by the presentation engine for the surface on the
|
|
|
|
specified device.
|
|
|
|
Opaque composition can: be achieved in any alpha compositing mode by
|
|
|
|
either using a swapchain image format that has no alpha component, or by
|
|
|
|
ensuring that all pixels in the swapchain images have an alpha value of
|
|
|
|
1.0.
|
Change log for September 6, 2016 Vulkan 1.0.26 spec update:
* Bump API patch number and header version number to 26 for this update.
Github Issues:
* Bring sample code in the +VK_KHR_surface+ and +VK_KHR_swapchain+
extension summary appendices up to date, and note they will be replaced
with pointers to the LunarG SDK examples in the future (public issue
279).
* Add a new <<fundamentals-commandsyntax-results-lifetime,Lifetime of
Retrieved Results>> section specifying that ftext:vkGet* and
ftext:VkEnumerate* results are invariant unless otherwise specified, and
specify behavior for individual commands which are not invariant (public
issue 280).
* Remove conflicting definition of
slink:VkDisplayPlaneCapabilitiesKHR::pname:maxSrcPosition and clean up
language of the remaining definition (public issue 351).
* Fix many minor spelling errors and add rules to the style guide to
prevent recurrences (public issue 352).
Internal Issues:
* Remove redundant descriptions of the etext:VK_USE_PLATFORM_* macros from
the <<wsi,Window System Integration>> chapter in favor of the
description in the <<boilerplate-wsi-header,Window System-Specific
Header Control>> appendix (internal issue 6).
* Replace misleading 'can: be destroyed when not X' with more correct
'must: not be destroyed while X' in the
<<fundamentals-objectmodel-lifetime,Object Lifetime>> section. Disallow
destroying a pipeline layout while a command buffer using it is
recording (internal issue 241).
* Clarify that ename:VK_IMAGE_USAGE_TRANSIENT_ATTACHMENT_BIT is valid for
all images used as attachments in elink:VkImageUsageFlagBits and the
slink:VkImageLayout validity language (internal issue 320).
* Note that <<extended-functionality-layers,Layers>> may wrap object
handles, but that this is a generally discouraged. A link to additional
information in the documentation for layer authors is provided (issue
398)
* Replace the mustnot: and shouldnot: macros with equivalent must: not and
should: not to get rid of non-English words while still highlighting
normative language (internal issue 407).
* Disallow creating multisampled images with
ename:VK_IMAGE_CREATE_CUBE_COMPATIBLE_BIT in the slink:VkImageLayout
validity language and the <<features-supported-sample-counts,Supported
Sample Counts>> section (internal issue 445).
* Fix typo so that flink:vkCmdDrawIndexedIndirect is defined in terms of
flink:vkCmdDrawIndexed rather than flink:vkCmdDrawIndirect (internal
issue 446).
* Reorganize the per-extension information sections to all be in the
<<extensions,Layers & Extensions>> appendix. Also fix a typo in
+VK_IMG_filter_cubic+ which incorrectly identified it as a +KHR+
extension (internal issue 461).
Other Issues:
* Use asciidoc markup instead of latexmath to simplify diagrams in the
<<features-formats-non-packed,byte mapping tables>> for color formats.
* Fix a markup problem with the wildcarded enumerant names in a NOTE in
the <<textures-texel-replacement,Texel Replacement>> section.
* Fix missing attributes in the XML interface for
elink:VkExternalMemoryHandleTypeFlagBitsNV and
elink:VkExternalMemoryFeatureFlagBitsNV (KhronosGroup/Vulkan-Hpp issue
#25)
* Cleanup reference page builds so only core pages are built for releases.
2016-09-06 13:17:27 +00:00
|
|
|
* pname:supportedUsageFlags is a bitmask of elink:VkImageUsageFlagBits
|
2016-08-28 10:47:19 +00:00
|
|
|
representing the ways the application can: use the presentable images of
|
|
|
|
a swapchain created for the surface on the specified device.
|
|
|
|
ename:VK_IMAGE_USAGE_COLOR_ATTACHMENT_BIT must: be included in the set
|
|
|
|
but implementations may: support additional usages.
|
|
|
|
|
2016-09-17 04:22:17 +00:00
|
|
|
[NOTE]
|
|
|
|
.Note
|
|
|
|
====
|
Change log for September 30, 2016 Vulkan 1.0.29 spec update:
* Bump API patch number and header version number to 29 for this update.
Github Issues:
* Remove redundant constraint on
slink:VkCommandBufferInheritanceInfo::pname:queryFlags (public issue
224).
* Fix typo and remove link in Note in the
<<extended-functionality-instance-extensions-and-devices, Instance
Extensions and Device Extensions>> section (public issue 359).
* Fix erroneous validation statement for the pname:layout member of
slink:VkComputePipelineCreateInfo (public issue 362).
Internal Issues:
* Restore long figure captions using asciidoc sidebar blocks, due to
restrictions of asciidoc syntax (internal issue 101).
* Replace most latexmath equations with comparable markup in straight
asciidoc, which significantly improves time required to fully load and
process the HTML forms of the Specification. There are known minor font
and alignment inconsistencies with MathJax and PDF rendering of
latexmath equations. Please do not file github issues about these. We
are aware of the inconsistencies and will make refinements over time,
while the performance improvements are compelling in at least some major
browsers (internal issue 313).
* Move handcoded validity statements from +vk.xml+ into the Specification
body, easing work in the single-branch model. Specify the distinction
between these explicit statements, and the implicit validity statements
inferred from vk.xml. Validity statements now appear in two blocks for
each command and structure - handcoded "Valid Usage" and the implicit
"Valid Usage (Implicit)" (internal issue 392).
* Add the +returnedonly="false"+ attribute to WSI output structures,
removing incorrectly generated implicit validity statements for
slink:VkDisplayPropertiesKHR, slink:VkDisplayPlanePropertiesKHR,
slink:VkDisplayModePropertiesKHR, slink:VkDisplayPlaneCapabilitiesKHR,
slink:VkSurfaceCapabilitiesKHR, and slink:VkSurfaceFormatKHR structures
(internal issue 486).
* Update slink:VkImageLayout to require the
ename:VK_IMAGE_USAGE_SAMPLED_BIT be set for sampled depth/stencil images
(internal issue 487).
* Use an explicit format specifier string for the date command invocation
in the +Makefile+ instead of the shorthand -R option, which doesn't work
on BSD and MaxOS X date commands (internal issue 500).
Other Issues:
* Use the terms ``allocation scope'' and ``extension scope'' instead of
just ``scope'', and add them to the glossary.
2016-10-01 04:13:37 +00:00
|
|
|
Formulas such as [eq]#min(N, pname:maxImageCount)# are not correct, since
|
Change log for September 23, 2016 Vulkan 1.0.28 spec update:
* Bump API patch number and header version number to 28 for this update.
Github Issues:
* Minor spelling and typography cleanup, add definitions of
ename:VK_FALSE and ename:VK_TRUE as just what their names say
(public issues 220, 318, 325, 365; internal issues 451, 496)
* Clarify that the pname:maxDescriptorSet limits in the
<<features-limits-required,Required Limits>> table are n *
maxPerStage limit (where n=number of supported stages) (public issue
254).
* Minor cleanup to <<boilerplate-platform-macros,Platform-Specific
Macro Definitions>> appendix (public issue 314).
* Add valid usage statement to slink:VkPipelineLayoutCreateInfo
disallowing multiple push constant ranges for the same shader stage
(public issue 340).
* Clarify the elink:VkSharingMode description of what executing the
"same" barriers means in case of ownership transfer (public issue
347).
* Rename copyright.txt and add COPYING.md to try and reduce confusion
about applicable copyrights (public issue 350).
* Extend the table in the <<boilerplate-wsi-header, Window System-Specific
Header Control>> section to describe the external headers included when
each etext:VK_USE_PLATFORM_* macro is defined (public issue 376).
Internal Issues:
* Add "Revision History" to the PDF outputs following the table of
contents, to match HTML outputs (internal issue 43).
* Clarified that flink:vkMapMemory may fail due to virtual address
space limitations (internal issue 346).
* Add +refBody+ comment markup for ref page autoextraction when required
(internal issue 400).
* Document proper use of "mipmap" and "mip" in the style guide API
naming rules, matching the spelling rules (internal issue 471).
* Tweak the <<extensions,Layers and Extensions>> appendix to note that
the Specification may be built with arbitrary combinations of
extensions (internal issue 483).
* Remove incorrect statement allowing
slink:VkClearAttachment::pname:colorAttachment to be >=
slink:VkSubpassDescription::pname:colorAttachmentCount (internal
issue 488).
* The <<features-limits-viewportboundsrange,viewportBoundsRange>> is
expressed in terms of the pname:maxViewportDimensions but this is
actually two values. Clarify that it's based on the larger of the two
(if they differ) (internal issue 499).
Other Issues:
* Reflowed text of the entire spec using the 'reflow' Makefile gater,
to (hopefully) reduce future internal git churn as edits are made
and extensions added in return for one-time pain. This has no
perceptible change on the spec outputs but considerable changes on
the asciidoc source (internal issue 367).
2016-09-24 07:58:11 +00:00
|
|
|
pname:maxImageCount may: be zero.
|
2016-09-17 04:22:17 +00:00
|
|
|
====
|
|
|
|
|
2016-08-28 10:47:19 +00:00
|
|
|
include::../../validity/structs/VkSurfaceCapabilitiesKHR.txt[]
|
|
|
|
|
|
|
|
// refBegin VkSurfaceTransformFlagBitsKHR - presentation transforms supported on a device
|
|
|
|
|
|
|
|
The pname:supportedTransforms and pname:currentTransform members are of type
|
|
|
|
ename:VkSurfaceTransformFlagBitsKHR, which contains the following values:
|
|
|
|
|
|
|
|
include::../../api/enums/VkSurfaceTransformFlagBitsKHR.txt[]
|
|
|
|
|
|
|
|
These values are described as follows:
|
|
|
|
|
|
|
|
* ename:VK_SURFACE_TRANSFORM_IDENTITY_BIT_KHR: The image content is
|
|
|
|
presented without being transformed.
|
|
|
|
* ename:VK_SURFACE_TRANSFORM_ROTATE_90_BIT_KHR: The image content is
|
|
|
|
rotated 90 degrees clockwise.
|
|
|
|
* ename:VK_SURFACE_TRANSFORM_ROTATE_180_BIT_KHR: The image content is
|
|
|
|
rotated 180 degrees clockwise.
|
|
|
|
* ename:VK_SURFACE_TRANSFORM_ROTATE_270_BIT_KHR: The image content is
|
|
|
|
rotated 270 degrees clockwise.
|
Change log for September 23, 2016 Vulkan 1.0.28 spec update:
* Bump API patch number and header version number to 28 for this update.
Github Issues:
* Minor spelling and typography cleanup, add definitions of
ename:VK_FALSE and ename:VK_TRUE as just what their names say
(public issues 220, 318, 325, 365; internal issues 451, 496)
* Clarify that the pname:maxDescriptorSet limits in the
<<features-limits-required,Required Limits>> table are n *
maxPerStage limit (where n=number of supported stages) (public issue
254).
* Minor cleanup to <<boilerplate-platform-macros,Platform-Specific
Macro Definitions>> appendix (public issue 314).
* Add valid usage statement to slink:VkPipelineLayoutCreateInfo
disallowing multiple push constant ranges for the same shader stage
(public issue 340).
* Clarify the elink:VkSharingMode description of what executing the
"same" barriers means in case of ownership transfer (public issue
347).
* Rename copyright.txt and add COPYING.md to try and reduce confusion
about applicable copyrights (public issue 350).
* Extend the table in the <<boilerplate-wsi-header, Window System-Specific
Header Control>> section to describe the external headers included when
each etext:VK_USE_PLATFORM_* macro is defined (public issue 376).
Internal Issues:
* Add "Revision History" to the PDF outputs following the table of
contents, to match HTML outputs (internal issue 43).
* Clarified that flink:vkMapMemory may fail due to virtual address
space limitations (internal issue 346).
* Add +refBody+ comment markup for ref page autoextraction when required
(internal issue 400).
* Document proper use of "mipmap" and "mip" in the style guide API
naming rules, matching the spelling rules (internal issue 471).
* Tweak the <<extensions,Layers and Extensions>> appendix to note that
the Specification may be built with arbitrary combinations of
extensions (internal issue 483).
* Remove incorrect statement allowing
slink:VkClearAttachment::pname:colorAttachment to be >=
slink:VkSubpassDescription::pname:colorAttachmentCount (internal
issue 488).
* The <<features-limits-viewportboundsrange,viewportBoundsRange>> is
expressed in terms of the pname:maxViewportDimensions but this is
actually two values. Clarify that it's based on the larger of the two
(if they differ) (internal issue 499).
Other Issues:
* Reflowed text of the entire spec using the 'reflow' Makefile gater,
to (hopefully) reduce future internal git churn as edits are made
and extensions added in return for one-time pain. This has no
perceptible change on the spec outputs but considerable changes on
the asciidoc source (internal issue 367).
2016-09-24 07:58:11 +00:00
|
|
|
* ename:VK_SURFACE_TRANSFORM_HORIZONTAL_MIRROR_BIT_KHR: The image content
|
|
|
|
is mirrored horizontally.
|
2016-08-28 10:47:19 +00:00
|
|
|
* ename:VK_SURFACE_TRANSFORM_HORIZONTAL_MIRROR_ROTATE_90_BIT_KHR: The
|
|
|
|
image content is mirrored horizontally, then rotated 90 degrees
|
|
|
|
clockwise.
|
|
|
|
* ename:VK_SURFACE_TRANSFORM_HORIZONTAL_MIRROR_ROTATE_180_BIT_KHR: The
|
|
|
|
image content is mirrored horizontally, then rotated 180 degrees
|
|
|
|
clockwise.
|
|
|
|
* ename:VK_SURFACE_TRANSFORM_HORIZONTAL_MIRROR_ROTATE_270_BIT_KHR: The
|
|
|
|
image content is mirrored horizontally, then rotated 270 degrees
|
|
|
|
clockwise.
|
|
|
|
* ename:VK_SURFACE_TRANSFORM_INHERIT_BIT_KHR: The presentation transform
|
|
|
|
is not specified, and is instead determined by platform-specific
|
|
|
|
considerations and mechanisms outside Vulkan.
|
|
|
|
|
|
|
|
// refEnd VkSurfaceTransformFlagBitsKHR
|
|
|
|
|
|
|
|
// refBegin VkCompositeAlphaFlagBitsKHR - alpha compositing modes supported on a device
|
|
|
|
|
|
|
|
The pname:supportedCompositeAlpha member is of type
|
|
|
|
ename:VkCompositeAlphaFlagBitsKHR, which contains the following values:
|
|
|
|
|
|
|
|
include::../../api/enums/VkCompositeAlphaFlagBitsKHR.txt[]
|
|
|
|
|
|
|
|
These values are described as follows:
|
|
|
|
|
|
|
|
* ename:VK_COMPOSITE_ALPHA_OPAQUE_BIT_KHR: The alpha channel, if it
|
Change log for September 23, 2016 Vulkan 1.0.28 spec update:
* Bump API patch number and header version number to 28 for this update.
Github Issues:
* Minor spelling and typography cleanup, add definitions of
ename:VK_FALSE and ename:VK_TRUE as just what their names say
(public issues 220, 318, 325, 365; internal issues 451, 496)
* Clarify that the pname:maxDescriptorSet limits in the
<<features-limits-required,Required Limits>> table are n *
maxPerStage limit (where n=number of supported stages) (public issue
254).
* Minor cleanup to <<boilerplate-platform-macros,Platform-Specific
Macro Definitions>> appendix (public issue 314).
* Add valid usage statement to slink:VkPipelineLayoutCreateInfo
disallowing multiple push constant ranges for the same shader stage
(public issue 340).
* Clarify the elink:VkSharingMode description of what executing the
"same" barriers means in case of ownership transfer (public issue
347).
* Rename copyright.txt and add COPYING.md to try and reduce confusion
about applicable copyrights (public issue 350).
* Extend the table in the <<boilerplate-wsi-header, Window System-Specific
Header Control>> section to describe the external headers included when
each etext:VK_USE_PLATFORM_* macro is defined (public issue 376).
Internal Issues:
* Add "Revision History" to the PDF outputs following the table of
contents, to match HTML outputs (internal issue 43).
* Clarified that flink:vkMapMemory may fail due to virtual address
space limitations (internal issue 346).
* Add +refBody+ comment markup for ref page autoextraction when required
(internal issue 400).
* Document proper use of "mipmap" and "mip" in the style guide API
naming rules, matching the spelling rules (internal issue 471).
* Tweak the <<extensions,Layers and Extensions>> appendix to note that
the Specification may be built with arbitrary combinations of
extensions (internal issue 483).
* Remove incorrect statement allowing
slink:VkClearAttachment::pname:colorAttachment to be >=
slink:VkSubpassDescription::pname:colorAttachmentCount (internal
issue 488).
* The <<features-limits-viewportboundsrange,viewportBoundsRange>> is
expressed in terms of the pname:maxViewportDimensions but this is
actually two values. Clarify that it's based on the larger of the two
(if they differ) (internal issue 499).
Other Issues:
* Reflowed text of the entire spec using the 'reflow' Makefile gater,
to (hopefully) reduce future internal git churn as edits are made
and extensions added in return for one-time pain. This has no
perceptible change on the spec outputs but considerable changes on
the asciidoc source (internal issue 367).
2016-09-24 07:58:11 +00:00
|
|
|
exists, of the images is ignored in the compositing process.
|
|
|
|
Instead, the image is treated as if it has a constant alpha of 1.0.
|
2016-08-28 10:47:19 +00:00
|
|
|
* ename:VK_COMPOSITE_ALPHA_PRE_MULTIPLIED_BIT_KHR: The alpha channel, if
|
Change log for September 23, 2016 Vulkan 1.0.28 spec update:
* Bump API patch number and header version number to 28 for this update.
Github Issues:
* Minor spelling and typography cleanup, add definitions of
ename:VK_FALSE and ename:VK_TRUE as just what their names say
(public issues 220, 318, 325, 365; internal issues 451, 496)
* Clarify that the pname:maxDescriptorSet limits in the
<<features-limits-required,Required Limits>> table are n *
maxPerStage limit (where n=number of supported stages) (public issue
254).
* Minor cleanup to <<boilerplate-platform-macros,Platform-Specific
Macro Definitions>> appendix (public issue 314).
* Add valid usage statement to slink:VkPipelineLayoutCreateInfo
disallowing multiple push constant ranges for the same shader stage
(public issue 340).
* Clarify the elink:VkSharingMode description of what executing the
"same" barriers means in case of ownership transfer (public issue
347).
* Rename copyright.txt and add COPYING.md to try and reduce confusion
about applicable copyrights (public issue 350).
* Extend the table in the <<boilerplate-wsi-header, Window System-Specific
Header Control>> section to describe the external headers included when
each etext:VK_USE_PLATFORM_* macro is defined (public issue 376).
Internal Issues:
* Add "Revision History" to the PDF outputs following the table of
contents, to match HTML outputs (internal issue 43).
* Clarified that flink:vkMapMemory may fail due to virtual address
space limitations (internal issue 346).
* Add +refBody+ comment markup for ref page autoextraction when required
(internal issue 400).
* Document proper use of "mipmap" and "mip" in the style guide API
naming rules, matching the spelling rules (internal issue 471).
* Tweak the <<extensions,Layers and Extensions>> appendix to note that
the Specification may be built with arbitrary combinations of
extensions (internal issue 483).
* Remove incorrect statement allowing
slink:VkClearAttachment::pname:colorAttachment to be >=
slink:VkSubpassDescription::pname:colorAttachmentCount (internal
issue 488).
* The <<features-limits-viewportboundsrange,viewportBoundsRange>> is
expressed in terms of the pname:maxViewportDimensions but this is
actually two values. Clarify that it's based on the larger of the two
(if they differ) (internal issue 499).
Other Issues:
* Reflowed text of the entire spec using the 'reflow' Makefile gater,
to (hopefully) reduce future internal git churn as edits are made
and extensions added in return for one-time pain. This has no
perceptible change on the spec outputs but considerable changes on
the asciidoc source (internal issue 367).
2016-09-24 07:58:11 +00:00
|
|
|
it exists, of the images is respected in the compositing process.
|
|
|
|
The non-alpha channels of the image are expected to already be
|
|
|
|
multiplied by the alpha channel by the application.
|
|
|
|
* ename:VK_COMPOSITE_ALPHA_POST_MULTIPLIED_BIT_KHR: The alpha channel, if
|
|
|
|
it exists, of the images is respected in the compositing process.
|
2016-08-28 10:47:19 +00:00
|
|
|
The non-alpha channels of the image are not expected to already be
|
|
|
|
multiplied by the alpha channel by the application; instead, the
|
|
|
|
compositor will multiply the non-alpha channels of the image by the
|
|
|
|
alpha channel during compositing.
|
|
|
|
* ename:VK_COMPOSITE_ALPHA_INHERIT_BIT_KHR: The way in which the
|
Change log for September 23, 2016 Vulkan 1.0.28 spec update:
* Bump API patch number and header version number to 28 for this update.
Github Issues:
* Minor spelling and typography cleanup, add definitions of
ename:VK_FALSE and ename:VK_TRUE as just what their names say
(public issues 220, 318, 325, 365; internal issues 451, 496)
* Clarify that the pname:maxDescriptorSet limits in the
<<features-limits-required,Required Limits>> table are n *
maxPerStage limit (where n=number of supported stages) (public issue
254).
* Minor cleanup to <<boilerplate-platform-macros,Platform-Specific
Macro Definitions>> appendix (public issue 314).
* Add valid usage statement to slink:VkPipelineLayoutCreateInfo
disallowing multiple push constant ranges for the same shader stage
(public issue 340).
* Clarify the elink:VkSharingMode description of what executing the
"same" barriers means in case of ownership transfer (public issue
347).
* Rename copyright.txt and add COPYING.md to try and reduce confusion
about applicable copyrights (public issue 350).
* Extend the table in the <<boilerplate-wsi-header, Window System-Specific
Header Control>> section to describe the external headers included when
each etext:VK_USE_PLATFORM_* macro is defined (public issue 376).
Internal Issues:
* Add "Revision History" to the PDF outputs following the table of
contents, to match HTML outputs (internal issue 43).
* Clarified that flink:vkMapMemory may fail due to virtual address
space limitations (internal issue 346).
* Add +refBody+ comment markup for ref page autoextraction when required
(internal issue 400).
* Document proper use of "mipmap" and "mip" in the style guide API
naming rules, matching the spelling rules (internal issue 471).
* Tweak the <<extensions,Layers and Extensions>> appendix to note that
the Specification may be built with arbitrary combinations of
extensions (internal issue 483).
* Remove incorrect statement allowing
slink:VkClearAttachment::pname:colorAttachment to be >=
slink:VkSubpassDescription::pname:colorAttachmentCount (internal
issue 488).
* The <<features-limits-viewportboundsrange,viewportBoundsRange>> is
expressed in terms of the pname:maxViewportDimensions but this is
actually two values. Clarify that it's based on the larger of the two
(if they differ) (internal issue 499).
Other Issues:
* Reflowed text of the entire spec using the 'reflow' Makefile gater,
to (hopefully) reduce future internal git churn as edits are made
and extensions added in return for one-time pain. This has no
perceptible change on the spec outputs but considerable changes on
the asciidoc source (internal issue 367).
2016-09-24 07:58:11 +00:00
|
|
|
presentation engine treats the alpha channel in the images is unknown to
|
|
|
|
the Vulkan API.
|
|
|
|
Instead, the application is responsible for setting the composite alpha
|
|
|
|
blending mode using native window system commands.
|
2016-08-28 10:47:19 +00:00
|
|
|
If the application does not set the blending mode using native window
|
|
|
|
system commands, then a platform-specific default will be used.
|
|
|
|
|
|
|
|
// refEnd VkCompositeAlphaFlagBitsKHR
|
|
|
|
|
|
|
|
// refBegin vkGetPhysicalDeviceSurfaceFormatsKHR - Query color formats supported by surface
|
|
|
|
|
Change log for September 6, 2016 Vulkan 1.0.26 spec update:
* Bump API patch number and header version number to 26 for this update.
Github Issues:
* Bring sample code in the +VK_KHR_surface+ and +VK_KHR_swapchain+
extension summary appendices up to date, and note they will be replaced
with pointers to the LunarG SDK examples in the future (public issue
279).
* Add a new <<fundamentals-commandsyntax-results-lifetime,Lifetime of
Retrieved Results>> section specifying that ftext:vkGet* and
ftext:VkEnumerate* results are invariant unless otherwise specified, and
specify behavior for individual commands which are not invariant (public
issue 280).
* Remove conflicting definition of
slink:VkDisplayPlaneCapabilitiesKHR::pname:maxSrcPosition and clean up
language of the remaining definition (public issue 351).
* Fix many minor spelling errors and add rules to the style guide to
prevent recurrences (public issue 352).
Internal Issues:
* Remove redundant descriptions of the etext:VK_USE_PLATFORM_* macros from
the <<wsi,Window System Integration>> chapter in favor of the
description in the <<boilerplate-wsi-header,Window System-Specific
Header Control>> appendix (internal issue 6).
* Replace misleading 'can: be destroyed when not X' with more correct
'must: not be destroyed while X' in the
<<fundamentals-objectmodel-lifetime,Object Lifetime>> section. Disallow
destroying a pipeline layout while a command buffer using it is
recording (internal issue 241).
* Clarify that ename:VK_IMAGE_USAGE_TRANSIENT_ATTACHMENT_BIT is valid for
all images used as attachments in elink:VkImageUsageFlagBits and the
slink:VkImageLayout validity language (internal issue 320).
* Note that <<extended-functionality-layers,Layers>> may wrap object
handles, but that this is a generally discouraged. A link to additional
information in the documentation for layer authors is provided (issue
398)
* Replace the mustnot: and shouldnot: macros with equivalent must: not and
should: not to get rid of non-English words while still highlighting
normative language (internal issue 407).
* Disallow creating multisampled images with
ename:VK_IMAGE_CREATE_CUBE_COMPATIBLE_BIT in the slink:VkImageLayout
validity language and the <<features-supported-sample-counts,Supported
Sample Counts>> section (internal issue 445).
* Fix typo so that flink:vkCmdDrawIndexedIndirect is defined in terms of
flink:vkCmdDrawIndexed rather than flink:vkCmdDrawIndirect (internal
issue 446).
* Reorganize the per-extension information sections to all be in the
<<extensions,Layers & Extensions>> appendix. Also fix a typo in
+VK_IMG_filter_cubic+ which incorrectly identified it as a +KHR+
extension (internal issue 461).
Other Issues:
* Use asciidoc markup instead of latexmath to simplify diagrams in the
<<features-formats-non-packed,byte mapping tables>> for color formats.
* Fix a markup problem with the wildcarded enumerant names in a NOTE in
the <<textures-texel-replacement,Texel Replacement>> section.
* Fix missing attributes in the XML interface for
elink:VkExternalMemoryHandleTypeFlagBitsNV and
elink:VkExternalMemoryFeatureFlagBitsNV (KhronosGroup/Vulkan-Hpp issue
#25)
* Cleanup reference page builds so only core pages are built for releases.
2016-09-06 13:17:27 +00:00
|
|
|
To query the supported swapchain format-color space pairs for a surface,
|
2016-08-28 10:47:19 +00:00
|
|
|
call:
|
|
|
|
|
|
|
|
include::../../api/protos/vkGetPhysicalDeviceSurfaceFormatsKHR.txt[]
|
|
|
|
|
|
|
|
* pname:physicalDevice is the physical device that will be associated with
|
|
|
|
the swapchain to be created, as described for
|
|
|
|
flink:vkCreateSwapchainKHR.
|
|
|
|
* pname:surface is the surface that will be associated with the swapchain.
|
|
|
|
* pname:pSurfaceFormatCount is a pointer to an integer related to the
|
|
|
|
number of format pairs available or queried, as described below.
|
Change log for September 23, 2016 Vulkan 1.0.28 spec update:
* Bump API patch number and header version number to 28 for this update.
Github Issues:
* Minor spelling and typography cleanup, add definitions of
ename:VK_FALSE and ename:VK_TRUE as just what their names say
(public issues 220, 318, 325, 365; internal issues 451, 496)
* Clarify that the pname:maxDescriptorSet limits in the
<<features-limits-required,Required Limits>> table are n *
maxPerStage limit (where n=number of supported stages) (public issue
254).
* Minor cleanup to <<boilerplate-platform-macros,Platform-Specific
Macro Definitions>> appendix (public issue 314).
* Add valid usage statement to slink:VkPipelineLayoutCreateInfo
disallowing multiple push constant ranges for the same shader stage
(public issue 340).
* Clarify the elink:VkSharingMode description of what executing the
"same" barriers means in case of ownership transfer (public issue
347).
* Rename copyright.txt and add COPYING.md to try and reduce confusion
about applicable copyrights (public issue 350).
* Extend the table in the <<boilerplate-wsi-header, Window System-Specific
Header Control>> section to describe the external headers included when
each etext:VK_USE_PLATFORM_* macro is defined (public issue 376).
Internal Issues:
* Add "Revision History" to the PDF outputs following the table of
contents, to match HTML outputs (internal issue 43).
* Clarified that flink:vkMapMemory may fail due to virtual address
space limitations (internal issue 346).
* Add +refBody+ comment markup for ref page autoextraction when required
(internal issue 400).
* Document proper use of "mipmap" and "mip" in the style guide API
naming rules, matching the spelling rules (internal issue 471).
* Tweak the <<extensions,Layers and Extensions>> appendix to note that
the Specification may be built with arbitrary combinations of
extensions (internal issue 483).
* Remove incorrect statement allowing
slink:VkClearAttachment::pname:colorAttachment to be >=
slink:VkSubpassDescription::pname:colorAttachmentCount (internal
issue 488).
* The <<features-limits-viewportboundsrange,viewportBoundsRange>> is
expressed in terms of the pname:maxViewportDimensions but this is
actually two values. Clarify that it's based on the larger of the two
(if they differ) (internal issue 499).
Other Issues:
* Reflowed text of the entire spec using the 'reflow' Makefile gater,
to (hopefully) reduce future internal git churn as edits are made
and extensions added in return for one-time pain. This has no
perceptible change on the spec outputs but considerable changes on
the asciidoc source (internal issue 367).
2016-09-24 07:58:11 +00:00
|
|
|
* pname:pSurfaceFormats is either `NULL` or a pointer to an array of
|
|
|
|
sname:VkSurfaceFormatKHR structures.
|
2016-08-28 10:47:19 +00:00
|
|
|
|
|
|
|
If pname:pSurfaceFormats is `NULL`, then the number of format pairs
|
|
|
|
supported for the given pname:surface is returned in
|
Change log for September 23, 2016 Vulkan 1.0.28 spec update:
* Bump API patch number and header version number to 28 for this update.
Github Issues:
* Minor spelling and typography cleanup, add definitions of
ename:VK_FALSE and ename:VK_TRUE as just what their names say
(public issues 220, 318, 325, 365; internal issues 451, 496)
* Clarify that the pname:maxDescriptorSet limits in the
<<features-limits-required,Required Limits>> table are n *
maxPerStage limit (where n=number of supported stages) (public issue
254).
* Minor cleanup to <<boilerplate-platform-macros,Platform-Specific
Macro Definitions>> appendix (public issue 314).
* Add valid usage statement to slink:VkPipelineLayoutCreateInfo
disallowing multiple push constant ranges for the same shader stage
(public issue 340).
* Clarify the elink:VkSharingMode description of what executing the
"same" barriers means in case of ownership transfer (public issue
347).
* Rename copyright.txt and add COPYING.md to try and reduce confusion
about applicable copyrights (public issue 350).
* Extend the table in the <<boilerplate-wsi-header, Window System-Specific
Header Control>> section to describe the external headers included when
each etext:VK_USE_PLATFORM_* macro is defined (public issue 376).
Internal Issues:
* Add "Revision History" to the PDF outputs following the table of
contents, to match HTML outputs (internal issue 43).
* Clarified that flink:vkMapMemory may fail due to virtual address
space limitations (internal issue 346).
* Add +refBody+ comment markup for ref page autoextraction when required
(internal issue 400).
* Document proper use of "mipmap" and "mip" in the style guide API
naming rules, matching the spelling rules (internal issue 471).
* Tweak the <<extensions,Layers and Extensions>> appendix to note that
the Specification may be built with arbitrary combinations of
extensions (internal issue 483).
* Remove incorrect statement allowing
slink:VkClearAttachment::pname:colorAttachment to be >=
slink:VkSubpassDescription::pname:colorAttachmentCount (internal
issue 488).
* The <<features-limits-viewportboundsrange,viewportBoundsRange>> is
expressed in terms of the pname:maxViewportDimensions but this is
actually two values. Clarify that it's based on the larger of the two
(if they differ) (internal issue 499).
Other Issues:
* Reflowed text of the entire spec using the 'reflow' Makefile gater,
to (hopefully) reduce future internal git churn as edits are made
and extensions added in return for one-time pain. This has no
perceptible change on the spec outputs but considerable changes on
the asciidoc source (internal issue 367).
2016-09-24 07:58:11 +00:00
|
|
|
pname:pSurfaceFormatCount.
|
|
|
|
Otherwise, pname:pSurfaceFormatCount must: point to a variable set by the
|
|
|
|
user to the number of elements in the pname:pSurfaceFormats array, and on
|
|
|
|
return the variable is overwritten with the number of structures actually
|
|
|
|
written to pname:pSurfaceFormats.
|
|
|
|
If the value of pname:pSurfaceFormatCount is less than the number of format
|
|
|
|
pairs supported, at most pname:pSurfaceFormatCount structures will be
|
|
|
|
written.
|
2016-08-28 10:47:19 +00:00
|
|
|
If pname:pSurfaceFormatCount is smaller than the number of format pairs
|
|
|
|
supported for the given pname:surface, ename:VK_INCOMPLETE will be returned
|
|
|
|
instead of ename:VK_SUCCESS to indicate that not all the available values
|
|
|
|
were returned.
|
|
|
|
|
|
|
|
include::../../validity/protos/vkGetPhysicalDeviceSurfaceFormatsKHR.txt[]
|
|
|
|
|
Change log for September 6, 2016 Vulkan 1.0.26 spec update:
* Bump API patch number and header version number to 26 for this update.
Github Issues:
* Bring sample code in the +VK_KHR_surface+ and +VK_KHR_swapchain+
extension summary appendices up to date, and note they will be replaced
with pointers to the LunarG SDK examples in the future (public issue
279).
* Add a new <<fundamentals-commandsyntax-results-lifetime,Lifetime of
Retrieved Results>> section specifying that ftext:vkGet* and
ftext:VkEnumerate* results are invariant unless otherwise specified, and
specify behavior for individual commands which are not invariant (public
issue 280).
* Remove conflicting definition of
slink:VkDisplayPlaneCapabilitiesKHR::pname:maxSrcPosition and clean up
language of the remaining definition (public issue 351).
* Fix many minor spelling errors and add rules to the style guide to
prevent recurrences (public issue 352).
Internal Issues:
* Remove redundant descriptions of the etext:VK_USE_PLATFORM_* macros from
the <<wsi,Window System Integration>> chapter in favor of the
description in the <<boilerplate-wsi-header,Window System-Specific
Header Control>> appendix (internal issue 6).
* Replace misleading 'can: be destroyed when not X' with more correct
'must: not be destroyed while X' in the
<<fundamentals-objectmodel-lifetime,Object Lifetime>> section. Disallow
destroying a pipeline layout while a command buffer using it is
recording (internal issue 241).
* Clarify that ename:VK_IMAGE_USAGE_TRANSIENT_ATTACHMENT_BIT is valid for
all images used as attachments in elink:VkImageUsageFlagBits and the
slink:VkImageLayout validity language (internal issue 320).
* Note that <<extended-functionality-layers,Layers>> may wrap object
handles, but that this is a generally discouraged. A link to additional
information in the documentation for layer authors is provided (issue
398)
* Replace the mustnot: and shouldnot: macros with equivalent must: not and
should: not to get rid of non-English words while still highlighting
normative language (internal issue 407).
* Disallow creating multisampled images with
ename:VK_IMAGE_CREATE_CUBE_COMPATIBLE_BIT in the slink:VkImageLayout
validity language and the <<features-supported-sample-counts,Supported
Sample Counts>> section (internal issue 445).
* Fix typo so that flink:vkCmdDrawIndexedIndirect is defined in terms of
flink:vkCmdDrawIndexed rather than flink:vkCmdDrawIndirect (internal
issue 446).
* Reorganize the per-extension information sections to all be in the
<<extensions,Layers & Extensions>> appendix. Also fix a typo in
+VK_IMG_filter_cubic+ which incorrectly identified it as a +KHR+
extension (internal issue 461).
Other Issues:
* Use asciidoc markup instead of latexmath to simplify diagrams in the
<<features-formats-non-packed,byte mapping tables>> for color formats.
* Fix a markup problem with the wildcarded enumerant names in a NOTE in
the <<textures-texel-replacement,Texel Replacement>> section.
* Fix missing attributes in the XML interface for
elink:VkExternalMemoryHandleTypeFlagBitsNV and
elink:VkExternalMemoryFeatureFlagBitsNV (KhronosGroup/Vulkan-Hpp issue
#25)
* Cleanup reference page builds so only core pages are built for releases.
2016-09-06 13:17:27 +00:00
|
|
|
// refBegin VkSurfaceFormatKHR - Structure describing a supported swapchain format-color space pair
|
2016-08-28 10:47:19 +00:00
|
|
|
|
|
|
|
The sname:VkSurfaceFormatKHR structure is defined as:
|
|
|
|
|
|
|
|
include::../../api/structs/VkSurfaceFormatKHR.txt[]
|
|
|
|
|
|
|
|
* pname:format is a ename:VkFormat that is compatible with the specified
|
|
|
|
surface.
|
|
|
|
* pname:colorSpace is a presentation ename:VkColorSpaceKHR that is
|
|
|
|
compatible with the surface.
|
|
|
|
|
|
|
|
include::../../validity/structs/VkSurfaceFormatKHR.txt[]
|
|
|
|
|
Change log for September 23, 2016 Vulkan 1.0.28 spec update:
* Bump API patch number and header version number to 28 for this update.
Github Issues:
* Minor spelling and typography cleanup, add definitions of
ename:VK_FALSE and ename:VK_TRUE as just what their names say
(public issues 220, 318, 325, 365; internal issues 451, 496)
* Clarify that the pname:maxDescriptorSet limits in the
<<features-limits-required,Required Limits>> table are n *
maxPerStage limit (where n=number of supported stages) (public issue
254).
* Minor cleanup to <<boilerplate-platform-macros,Platform-Specific
Macro Definitions>> appendix (public issue 314).
* Add valid usage statement to slink:VkPipelineLayoutCreateInfo
disallowing multiple push constant ranges for the same shader stage
(public issue 340).
* Clarify the elink:VkSharingMode description of what executing the
"same" barriers means in case of ownership transfer (public issue
347).
* Rename copyright.txt and add COPYING.md to try and reduce confusion
about applicable copyrights (public issue 350).
* Extend the table in the <<boilerplate-wsi-header, Window System-Specific
Header Control>> section to describe the external headers included when
each etext:VK_USE_PLATFORM_* macro is defined (public issue 376).
Internal Issues:
* Add "Revision History" to the PDF outputs following the table of
contents, to match HTML outputs (internal issue 43).
* Clarified that flink:vkMapMemory may fail due to virtual address
space limitations (internal issue 346).
* Add +refBody+ comment markup for ref page autoextraction when required
(internal issue 400).
* Document proper use of "mipmap" and "mip" in the style guide API
naming rules, matching the spelling rules (internal issue 471).
* Tweak the <<extensions,Layers and Extensions>> appendix to note that
the Specification may be built with arbitrary combinations of
extensions (internal issue 483).
* Remove incorrect statement allowing
slink:VkClearAttachment::pname:colorAttachment to be >=
slink:VkSubpassDescription::pname:colorAttachmentCount (internal
issue 488).
* The <<features-limits-viewportboundsrange,viewportBoundsRange>> is
expressed in terms of the pname:maxViewportDimensions but this is
actually two values. Clarify that it's based on the larger of the two
(if they differ) (internal issue 499).
Other Issues:
* Reflowed text of the entire spec using the 'reflow' Makefile gater,
to (hopefully) reduce future internal git churn as edits are made
and extensions added in return for one-time pain. This has no
perceptible change on the spec outputs but considerable changes on
the asciidoc source (internal issue 367).
2016-09-24 07:58:11 +00:00
|
|
|
While the pname:format of a presentable image refers to the encoding of each
|
|
|
|
pixel, the pname:colorSpace determines how the presentation engine
|
|
|
|
interprets the pixel values.
|
|
|
|
A color space in this document refers to a specific combination of color
|
Change log for September 30, 2016 Vulkan 1.0.29 spec update:
* Bump API patch number and header version number to 29 for this update.
Github Issues:
* Remove redundant constraint on
slink:VkCommandBufferInheritanceInfo::pname:queryFlags (public issue
224).
* Fix typo and remove link in Note in the
<<extended-functionality-instance-extensions-and-devices, Instance
Extensions and Device Extensions>> section (public issue 359).
* Fix erroneous validation statement for the pname:layout member of
slink:VkComputePipelineCreateInfo (public issue 362).
Internal Issues:
* Restore long figure captions using asciidoc sidebar blocks, due to
restrictions of asciidoc syntax (internal issue 101).
* Replace most latexmath equations with comparable markup in straight
asciidoc, which significantly improves time required to fully load and
process the HTML forms of the Specification. There are known minor font
and alignment inconsistencies with MathJax and PDF rendering of
latexmath equations. Please do not file github issues about these. We
are aware of the inconsistencies and will make refinements over time,
while the performance improvements are compelling in at least some major
browsers (internal issue 313).
* Move handcoded validity statements from +vk.xml+ into the Specification
body, easing work in the single-branch model. Specify the distinction
between these explicit statements, and the implicit validity statements
inferred from vk.xml. Validity statements now appear in two blocks for
each command and structure - handcoded "Valid Usage" and the implicit
"Valid Usage (Implicit)" (internal issue 392).
* Add the +returnedonly="false"+ attribute to WSI output structures,
removing incorrectly generated implicit validity statements for
slink:VkDisplayPropertiesKHR, slink:VkDisplayPlanePropertiesKHR,
slink:VkDisplayModePropertiesKHR, slink:VkDisplayPlaneCapabilitiesKHR,
slink:VkSurfaceCapabilitiesKHR, and slink:VkSurfaceFormatKHR structures
(internal issue 486).
* Update slink:VkImageLayout to require the
ename:VK_IMAGE_USAGE_SAMPLED_BIT be set for sampled depth/stencil images
(internal issue 487).
* Use an explicit format specifier string for the date command invocation
in the +Makefile+ instead of the shorthand -R option, which doesn't work
on BSD and MaxOS X date commands (internal issue 500).
Other Issues:
* Use the terms ``allocation scope'' and ``extension scope'' instead of
just ``scope'', and add them to the glossary.
2016-10-01 04:13:37 +00:00
|
|
|
model (i.e. RGB, YUV, HSL etc.), the actual color space (defined by the
|
|
|
|
chromaticities of its primaries and a white point in CIE Lab), and a
|
|
|
|
transfer function that is applied before storing or transmitting color data
|
|
|
|
in the given color space.
|
2016-08-28 10:47:19 +00:00
|
|
|
|
Change log for September 6, 2016 Vulkan 1.0.26 spec update:
* Bump API patch number and header version number to 26 for this update.
Github Issues:
* Bring sample code in the +VK_KHR_surface+ and +VK_KHR_swapchain+
extension summary appendices up to date, and note they will be replaced
with pointers to the LunarG SDK examples in the future (public issue
279).
* Add a new <<fundamentals-commandsyntax-results-lifetime,Lifetime of
Retrieved Results>> section specifying that ftext:vkGet* and
ftext:VkEnumerate* results are invariant unless otherwise specified, and
specify behavior for individual commands which are not invariant (public
issue 280).
* Remove conflicting definition of
slink:VkDisplayPlaneCapabilitiesKHR::pname:maxSrcPosition and clean up
language of the remaining definition (public issue 351).
* Fix many minor spelling errors and add rules to the style guide to
prevent recurrences (public issue 352).
Internal Issues:
* Remove redundant descriptions of the etext:VK_USE_PLATFORM_* macros from
the <<wsi,Window System Integration>> chapter in favor of the
description in the <<boilerplate-wsi-header,Window System-Specific
Header Control>> appendix (internal issue 6).
* Replace misleading 'can: be destroyed when not X' with more correct
'must: not be destroyed while X' in the
<<fundamentals-objectmodel-lifetime,Object Lifetime>> section. Disallow
destroying a pipeline layout while a command buffer using it is
recording (internal issue 241).
* Clarify that ename:VK_IMAGE_USAGE_TRANSIENT_ATTACHMENT_BIT is valid for
all images used as attachments in elink:VkImageUsageFlagBits and the
slink:VkImageLayout validity language (internal issue 320).
* Note that <<extended-functionality-layers,Layers>> may wrap object
handles, but that this is a generally discouraged. A link to additional
information in the documentation for layer authors is provided (issue
398)
* Replace the mustnot: and shouldnot: macros with equivalent must: not and
should: not to get rid of non-English words while still highlighting
normative language (internal issue 407).
* Disallow creating multisampled images with
ename:VK_IMAGE_CREATE_CUBE_COMPATIBLE_BIT in the slink:VkImageLayout
validity language and the <<features-supported-sample-counts,Supported
Sample Counts>> section (internal issue 445).
* Fix typo so that flink:vkCmdDrawIndexedIndirect is defined in terms of
flink:vkCmdDrawIndexed rather than flink:vkCmdDrawIndirect (internal
issue 446).
* Reorganize the per-extension information sections to all be in the
<<extensions,Layers & Extensions>> appendix. Also fix a typo in
+VK_IMG_filter_cubic+ which incorrectly identified it as a +KHR+
extension (internal issue 461).
Other Issues:
* Use asciidoc markup instead of latexmath to simplify diagrams in the
<<features-formats-non-packed,byte mapping tables>> for color formats.
* Fix a markup problem with the wildcarded enumerant names in a NOTE in
the <<textures-texel-replacement,Texel Replacement>> section.
* Fix missing attributes in the XML interface for
elink:VkExternalMemoryHandleTypeFlagBitsNV and
elink:VkExternalMemoryFeatureFlagBitsNV (KhronosGroup/Vulkan-Hpp issue
#25)
* Cleanup reference page builds so only core pages are built for releases.
2016-09-06 13:17:27 +00:00
|
|
|
// refBegin VkColorSpaceKHR - supported color space of the presentation engine
|
2016-08-28 10:47:19 +00:00
|
|
|
|
|
|
|
The ename:VkColorSpaceKHR is defined as follows:
|
|
|
|
|
|
|
|
include::../../api/enums/VkColorSpaceKHR.txt[]
|
|
|
|
|
Change log for September 23, 2016 Vulkan 1.0.28 spec update:
* Bump API patch number and header version number to 28 for this update.
Github Issues:
* Minor spelling and typography cleanup, add definitions of
ename:VK_FALSE and ename:VK_TRUE as just what their names say
(public issues 220, 318, 325, 365; internal issues 451, 496)
* Clarify that the pname:maxDescriptorSet limits in the
<<features-limits-required,Required Limits>> table are n *
maxPerStage limit (where n=number of supported stages) (public issue
254).
* Minor cleanup to <<boilerplate-platform-macros,Platform-Specific
Macro Definitions>> appendix (public issue 314).
* Add valid usage statement to slink:VkPipelineLayoutCreateInfo
disallowing multiple push constant ranges for the same shader stage
(public issue 340).
* Clarify the elink:VkSharingMode description of what executing the
"same" barriers means in case of ownership transfer (public issue
347).
* Rename copyright.txt and add COPYING.md to try and reduce confusion
about applicable copyrights (public issue 350).
* Extend the table in the <<boilerplate-wsi-header, Window System-Specific
Header Control>> section to describe the external headers included when
each etext:VK_USE_PLATFORM_* macro is defined (public issue 376).
Internal Issues:
* Add "Revision History" to the PDF outputs following the table of
contents, to match HTML outputs (internal issue 43).
* Clarified that flink:vkMapMemory may fail due to virtual address
space limitations (internal issue 346).
* Add +refBody+ comment markup for ref page autoextraction when required
(internal issue 400).
* Document proper use of "mipmap" and "mip" in the style guide API
naming rules, matching the spelling rules (internal issue 471).
* Tweak the <<extensions,Layers and Extensions>> appendix to note that
the Specification may be built with arbitrary combinations of
extensions (internal issue 483).
* Remove incorrect statement allowing
slink:VkClearAttachment::pname:colorAttachment to be >=
slink:VkSubpassDescription::pname:colorAttachmentCount (internal
issue 488).
* The <<features-limits-viewportboundsrange,viewportBoundsRange>> is
expressed in terms of the pname:maxViewportDimensions but this is
actually two values. Clarify that it's based on the larger of the two
(if they differ) (internal issue 499).
Other Issues:
* Reflowed text of the entire spec using the 'reflow' Makefile gater,
to (hopefully) reduce future internal git churn as edits are made
and extensions added in return for one-time pain. This has no
perceptible change on the spec outputs but considerable changes on
the asciidoc source (internal issue 367).
2016-09-24 07:58:11 +00:00
|
|
|
* ename:VK_COLOR_SPACE_SRGB_NONLINEAR_KHR: The presentation engine
|
|
|
|
supports the sRGB color space.
|
2016-08-28 10:47:19 +00:00
|
|
|
|
|
|
|
[NOTE]
|
|
|
|
.Note
|
|
|
|
====
|
|
|
|
If pname:pSurfaceFormats includes just one entry, whose value for
|
Change log for September 23, 2016 Vulkan 1.0.28 spec update:
* Bump API patch number and header version number to 28 for this update.
Github Issues:
* Minor spelling and typography cleanup, add definitions of
ename:VK_FALSE and ename:VK_TRUE as just what their names say
(public issues 220, 318, 325, 365; internal issues 451, 496)
* Clarify that the pname:maxDescriptorSet limits in the
<<features-limits-required,Required Limits>> table are n *
maxPerStage limit (where n=number of supported stages) (public issue
254).
* Minor cleanup to <<boilerplate-platform-macros,Platform-Specific
Macro Definitions>> appendix (public issue 314).
* Add valid usage statement to slink:VkPipelineLayoutCreateInfo
disallowing multiple push constant ranges for the same shader stage
(public issue 340).
* Clarify the elink:VkSharingMode description of what executing the
"same" barriers means in case of ownership transfer (public issue
347).
* Rename copyright.txt and add COPYING.md to try and reduce confusion
about applicable copyrights (public issue 350).
* Extend the table in the <<boilerplate-wsi-header, Window System-Specific
Header Control>> section to describe the external headers included when
each etext:VK_USE_PLATFORM_* macro is defined (public issue 376).
Internal Issues:
* Add "Revision History" to the PDF outputs following the table of
contents, to match HTML outputs (internal issue 43).
* Clarified that flink:vkMapMemory may fail due to virtual address
space limitations (internal issue 346).
* Add +refBody+ comment markup for ref page autoextraction when required
(internal issue 400).
* Document proper use of "mipmap" and "mip" in the style guide API
naming rules, matching the spelling rules (internal issue 471).
* Tweak the <<extensions,Layers and Extensions>> appendix to note that
the Specification may be built with arbitrary combinations of
extensions (internal issue 483).
* Remove incorrect statement allowing
slink:VkClearAttachment::pname:colorAttachment to be >=
slink:VkSubpassDescription::pname:colorAttachmentCount (internal
issue 488).
* The <<features-limits-viewportboundsrange,viewportBoundsRange>> is
expressed in terms of the pname:maxViewportDimensions but this is
actually two values. Clarify that it's based on the larger of the two
(if they differ) (internal issue 499).
Other Issues:
* Reflowed text of the entire spec using the 'reflow' Makefile gater,
to (hopefully) reduce future internal git churn as edits are made
and extensions added in return for one-time pain. This has no
perceptible change on the spec outputs but considerable changes on
the asciidoc source (internal issue 367).
2016-09-24 07:58:11 +00:00
|
|
|
pname:format is ename:VK_FORMAT_UNDEFINED, pname:surface has no preferred
|
|
|
|
format.
|
|
|
|
In this case, the application can: use any valid ename:VkFormat value.
|
2016-08-28 10:47:19 +00:00
|
|
|
====
|
|
|
|
|
|
|
|
[NOTE]
|
|
|
|
.Note
|
|
|
|
====
|
Change log for September 23, 2016 Vulkan 1.0.28 spec update:
* Bump API patch number and header version number to 28 for this update.
Github Issues:
* Minor spelling and typography cleanup, add definitions of
ename:VK_FALSE and ename:VK_TRUE as just what their names say
(public issues 220, 318, 325, 365; internal issues 451, 496)
* Clarify that the pname:maxDescriptorSet limits in the
<<features-limits-required,Required Limits>> table are n *
maxPerStage limit (where n=number of supported stages) (public issue
254).
* Minor cleanup to <<boilerplate-platform-macros,Platform-Specific
Macro Definitions>> appendix (public issue 314).
* Add valid usage statement to slink:VkPipelineLayoutCreateInfo
disallowing multiple push constant ranges for the same shader stage
(public issue 340).
* Clarify the elink:VkSharingMode description of what executing the
"same" barriers means in case of ownership transfer (public issue
347).
* Rename copyright.txt and add COPYING.md to try and reduce confusion
about applicable copyrights (public issue 350).
* Extend the table in the <<boilerplate-wsi-header, Window System-Specific
Header Control>> section to describe the external headers included when
each etext:VK_USE_PLATFORM_* macro is defined (public issue 376).
Internal Issues:
* Add "Revision History" to the PDF outputs following the table of
contents, to match HTML outputs (internal issue 43).
* Clarified that flink:vkMapMemory may fail due to virtual address
space limitations (internal issue 346).
* Add +refBody+ comment markup for ref page autoextraction when required
(internal issue 400).
* Document proper use of "mipmap" and "mip" in the style guide API
naming rules, matching the spelling rules (internal issue 471).
* Tweak the <<extensions,Layers and Extensions>> appendix to note that
the Specification may be built with arbitrary combinations of
extensions (internal issue 483).
* Remove incorrect statement allowing
slink:VkClearAttachment::pname:colorAttachment to be >=
slink:VkSubpassDescription::pname:colorAttachmentCount (internal
issue 488).
* The <<features-limits-viewportboundsrange,viewportBoundsRange>> is
expressed in terms of the pname:maxViewportDimensions but this is
actually two values. Clarify that it's based on the larger of the two
(if they differ) (internal issue 499).
Other Issues:
* Reflowed text of the entire spec using the 'reflow' Makefile gater,
to (hopefully) reduce future internal git churn as edits are made
and extensions added in return for one-time pain. This has no
perceptible change on the spec outputs but considerable changes on
the asciidoc source (internal issue 367).
2016-09-24 07:58:11 +00:00
|
|
|
In the initial release of the +VK_KHR_surface+ and +VK_KHR_swapchain+
|
2016-08-28 10:47:19 +00:00
|
|
|
extensions, the token ename:VK_COLORSPACE_SRGB_NONLINEAR_KHR was used.
|
|
|
|
Starting in the May 13, 2016 updates to the extension branches, matching
|
|
|
|
release 1.0.13 of the core API specification,
|
|
|
|
ename:VK_COLOR_SPACE_SRGB_NONLINEAR_KHR is used instead for consistency with
|
Change log for September 23, 2016 Vulkan 1.0.28 spec update:
* Bump API patch number and header version number to 28 for this update.
Github Issues:
* Minor spelling and typography cleanup, add definitions of
ename:VK_FALSE and ename:VK_TRUE as just what their names say
(public issues 220, 318, 325, 365; internal issues 451, 496)
* Clarify that the pname:maxDescriptorSet limits in the
<<features-limits-required,Required Limits>> table are n *
maxPerStage limit (where n=number of supported stages) (public issue
254).
* Minor cleanup to <<boilerplate-platform-macros,Platform-Specific
Macro Definitions>> appendix (public issue 314).
* Add valid usage statement to slink:VkPipelineLayoutCreateInfo
disallowing multiple push constant ranges for the same shader stage
(public issue 340).
* Clarify the elink:VkSharingMode description of what executing the
"same" barriers means in case of ownership transfer (public issue
347).
* Rename copyright.txt and add COPYING.md to try and reduce confusion
about applicable copyrights (public issue 350).
* Extend the table in the <<boilerplate-wsi-header, Window System-Specific
Header Control>> section to describe the external headers included when
each etext:VK_USE_PLATFORM_* macro is defined (public issue 376).
Internal Issues:
* Add "Revision History" to the PDF outputs following the table of
contents, to match HTML outputs (internal issue 43).
* Clarified that flink:vkMapMemory may fail due to virtual address
space limitations (internal issue 346).
* Add +refBody+ comment markup for ref page autoextraction when required
(internal issue 400).
* Document proper use of "mipmap" and "mip" in the style guide API
naming rules, matching the spelling rules (internal issue 471).
* Tweak the <<extensions,Layers and Extensions>> appendix to note that
the Specification may be built with arbitrary combinations of
extensions (internal issue 483).
* Remove incorrect statement allowing
slink:VkClearAttachment::pname:colorAttachment to be >=
slink:VkSubpassDescription::pname:colorAttachmentCount (internal
issue 488).
* The <<features-limits-viewportboundsrange,viewportBoundsRange>> is
expressed in terms of the pname:maxViewportDimensions but this is
actually two values. Clarify that it's based on the larger of the two
(if they differ) (internal issue 499).
Other Issues:
* Reflowed text of the entire spec using the 'reflow' Makefile gater,
to (hopefully) reduce future internal git churn as edits are made
and extensions added in return for one-time pain. This has no
perceptible change on the spec outputs but considerable changes on
the asciidoc source (internal issue 367).
2016-09-24 07:58:11 +00:00
|
|
|
Vulkan naming rules.
|
|
|
|
The older enum is still available for backwards compatibility.
|
2016-08-28 10:47:19 +00:00
|
|
|
====
|
|
|
|
|
|
|
|
// refEnd VkColorSpaceKHR
|
|
|
|
|
|
|
|
// refBegin vkGetPhysicalDeviceSurfacePresentModesKHR - Query supported presentation modes
|
|
|
|
|
|
|
|
To query the supported presentation modes for a surface, call:
|
|
|
|
|
|
|
|
include::../../api/protos/vkGetPhysicalDeviceSurfacePresentModesKHR.txt[]
|
|
|
|
|
|
|
|
* pname:physicalDevice is the physical device that will be associated with
|
|
|
|
the swapchain to be created, as described for
|
|
|
|
flink:vkCreateSwapchainKHR.
|
|
|
|
* pname:surface is the surface that will be associated with the swapchain.
|
Change log for September 23, 2016 Vulkan 1.0.28 spec update:
* Bump API patch number and header version number to 28 for this update.
Github Issues:
* Minor spelling and typography cleanup, add definitions of
ename:VK_FALSE and ename:VK_TRUE as just what their names say
(public issues 220, 318, 325, 365; internal issues 451, 496)
* Clarify that the pname:maxDescriptorSet limits in the
<<features-limits-required,Required Limits>> table are n *
maxPerStage limit (where n=number of supported stages) (public issue
254).
* Minor cleanup to <<boilerplate-platform-macros,Platform-Specific
Macro Definitions>> appendix (public issue 314).
* Add valid usage statement to slink:VkPipelineLayoutCreateInfo
disallowing multiple push constant ranges for the same shader stage
(public issue 340).
* Clarify the elink:VkSharingMode description of what executing the
"same" barriers means in case of ownership transfer (public issue
347).
* Rename copyright.txt and add COPYING.md to try and reduce confusion
about applicable copyrights (public issue 350).
* Extend the table in the <<boilerplate-wsi-header, Window System-Specific
Header Control>> section to describe the external headers included when
each etext:VK_USE_PLATFORM_* macro is defined (public issue 376).
Internal Issues:
* Add "Revision History" to the PDF outputs following the table of
contents, to match HTML outputs (internal issue 43).
* Clarified that flink:vkMapMemory may fail due to virtual address
space limitations (internal issue 346).
* Add +refBody+ comment markup for ref page autoextraction when required
(internal issue 400).
* Document proper use of "mipmap" and "mip" in the style guide API
naming rules, matching the spelling rules (internal issue 471).
* Tweak the <<extensions,Layers and Extensions>> appendix to note that
the Specification may be built with arbitrary combinations of
extensions (internal issue 483).
* Remove incorrect statement allowing
slink:VkClearAttachment::pname:colorAttachment to be >=
slink:VkSubpassDescription::pname:colorAttachmentCount (internal
issue 488).
* The <<features-limits-viewportboundsrange,viewportBoundsRange>> is
expressed in terms of the pname:maxViewportDimensions but this is
actually two values. Clarify that it's based on the larger of the two
(if they differ) (internal issue 499).
Other Issues:
* Reflowed text of the entire spec using the 'reflow' Makefile gater,
to (hopefully) reduce future internal git churn as edits are made
and extensions added in return for one-time pain. This has no
perceptible change on the spec outputs but considerable changes on
the asciidoc source (internal issue 367).
2016-09-24 07:58:11 +00:00
|
|
|
* pname:pPresentModeCount is a pointer to an integer related to the number
|
|
|
|
of presentation modes available or queried, as described below.
|
|
|
|
* pname:pPresentModes is either `NULL` or a pointer to an array of
|
|
|
|
elink:VkPresentModeKHR structures.
|
2016-08-28 10:47:19 +00:00
|
|
|
|
|
|
|
If pname:pPresentModes is `NULL`, then the number of presentation modes
|
|
|
|
supported for the given pname:surface is returned in
|
Change log for September 23, 2016 Vulkan 1.0.28 spec update:
* Bump API patch number and header version number to 28 for this update.
Github Issues:
* Minor spelling and typography cleanup, add definitions of
ename:VK_FALSE and ename:VK_TRUE as just what their names say
(public issues 220, 318, 325, 365; internal issues 451, 496)
* Clarify that the pname:maxDescriptorSet limits in the
<<features-limits-required,Required Limits>> table are n *
maxPerStage limit (where n=number of supported stages) (public issue
254).
* Minor cleanup to <<boilerplate-platform-macros,Platform-Specific
Macro Definitions>> appendix (public issue 314).
* Add valid usage statement to slink:VkPipelineLayoutCreateInfo
disallowing multiple push constant ranges for the same shader stage
(public issue 340).
* Clarify the elink:VkSharingMode description of what executing the
"same" barriers means in case of ownership transfer (public issue
347).
* Rename copyright.txt and add COPYING.md to try and reduce confusion
about applicable copyrights (public issue 350).
* Extend the table in the <<boilerplate-wsi-header, Window System-Specific
Header Control>> section to describe the external headers included when
each etext:VK_USE_PLATFORM_* macro is defined (public issue 376).
Internal Issues:
* Add "Revision History" to the PDF outputs following the table of
contents, to match HTML outputs (internal issue 43).
* Clarified that flink:vkMapMemory may fail due to virtual address
space limitations (internal issue 346).
* Add +refBody+ comment markup for ref page autoextraction when required
(internal issue 400).
* Document proper use of "mipmap" and "mip" in the style guide API
naming rules, matching the spelling rules (internal issue 471).
* Tweak the <<extensions,Layers and Extensions>> appendix to note that
the Specification may be built with arbitrary combinations of
extensions (internal issue 483).
* Remove incorrect statement allowing
slink:VkClearAttachment::pname:colorAttachment to be >=
slink:VkSubpassDescription::pname:colorAttachmentCount (internal
issue 488).
* The <<features-limits-viewportboundsrange,viewportBoundsRange>> is
expressed in terms of the pname:maxViewportDimensions but this is
actually two values. Clarify that it's based on the larger of the two
(if they differ) (internal issue 499).
Other Issues:
* Reflowed text of the entire spec using the 'reflow' Makefile gater,
to (hopefully) reduce future internal git churn as edits are made
and extensions added in return for one-time pain. This has no
perceptible change on the spec outputs but considerable changes on
the asciidoc source (internal issue 367).
2016-09-24 07:58:11 +00:00
|
|
|
pname:pPresentModeCount.
|
|
|
|
Otherwise, pname:pPresentModeCount must: point to a variable set by the user
|
|
|
|
to the number of elements in the pname:pPresentModes array, and on return
|
|
|
|
the variable is overwritten with the number of values actually written to
|
|
|
|
pname:pPresentModes.
|
|
|
|
If the value of pname:pPresentModeCount is less than the number of
|
|
|
|
presentation modes supported, at most pname:pPresentModeCount values will be
|
|
|
|
written.
|
2016-08-28 10:47:19 +00:00
|
|
|
If pname:pPresentModeCount is smaller than the number of presentation modes
|
|
|
|
supported for the given pname:surface, ename:VK_INCOMPLETE will be returned
|
|
|
|
instead of ename:VK_SUCCESS to indicate that not all the available values
|
|
|
|
were returned.
|
|
|
|
|
|
|
|
include::../../validity/protos/vkGetPhysicalDeviceSurfacePresentModesKHR.txt[]
|
|
|
|
|
|
|
|
// refBegin VkPresentModeKHR - presentation mode supported for a surface
|
|
|
|
|
|
|
|
The definition of ename:VkPresentModeKHR is:
|
|
|
|
|
|
|
|
include::../../api/enums/VkPresentModeKHR.txt[]
|
|
|
|
|
|
|
|
* ename:VK_PRESENT_MODE_IMMEDIATE_KHR: The presentation engine does not
|
|
|
|
wait for a vertical blanking period to update the current image, meaning
|
Change log for September 23, 2016 Vulkan 1.0.28 spec update:
* Bump API patch number and header version number to 28 for this update.
Github Issues:
* Minor spelling and typography cleanup, add definitions of
ename:VK_FALSE and ename:VK_TRUE as just what their names say
(public issues 220, 318, 325, 365; internal issues 451, 496)
* Clarify that the pname:maxDescriptorSet limits in the
<<features-limits-required,Required Limits>> table are n *
maxPerStage limit (where n=number of supported stages) (public issue
254).
* Minor cleanup to <<boilerplate-platform-macros,Platform-Specific
Macro Definitions>> appendix (public issue 314).
* Add valid usage statement to slink:VkPipelineLayoutCreateInfo
disallowing multiple push constant ranges for the same shader stage
(public issue 340).
* Clarify the elink:VkSharingMode description of what executing the
"same" barriers means in case of ownership transfer (public issue
347).
* Rename copyright.txt and add COPYING.md to try and reduce confusion
about applicable copyrights (public issue 350).
* Extend the table in the <<boilerplate-wsi-header, Window System-Specific
Header Control>> section to describe the external headers included when
each etext:VK_USE_PLATFORM_* macro is defined (public issue 376).
Internal Issues:
* Add "Revision History" to the PDF outputs following the table of
contents, to match HTML outputs (internal issue 43).
* Clarified that flink:vkMapMemory may fail due to virtual address
space limitations (internal issue 346).
* Add +refBody+ comment markup for ref page autoextraction when required
(internal issue 400).
* Document proper use of "mipmap" and "mip" in the style guide API
naming rules, matching the spelling rules (internal issue 471).
* Tweak the <<extensions,Layers and Extensions>> appendix to note that
the Specification may be built with arbitrary combinations of
extensions (internal issue 483).
* Remove incorrect statement allowing
slink:VkClearAttachment::pname:colorAttachment to be >=
slink:VkSubpassDescription::pname:colorAttachmentCount (internal
issue 488).
* The <<features-limits-viewportboundsrange,viewportBoundsRange>> is
expressed in terms of the pname:maxViewportDimensions but this is
actually two values. Clarify that it's based on the larger of the two
(if they differ) (internal issue 499).
Other Issues:
* Reflowed text of the entire spec using the 'reflow' Makefile gater,
to (hopefully) reduce future internal git churn as edits are made
and extensions added in return for one-time pain. This has no
perceptible change on the spec outputs but considerable changes on
the asciidoc source (internal issue 367).
2016-09-24 07:58:11 +00:00
|
|
|
this mode may: result in visible tearing.
|
|
|
|
No internal queuing of presentation requests is needed, as the requests
|
|
|
|
are applied immediately.
|
2016-08-28 10:47:19 +00:00
|
|
|
* ename:VK_PRESENT_MODE_MAILBOX_KHR: The presentation engine waits for the
|
Change log for September 23, 2016 Vulkan 1.0.28 spec update:
* Bump API patch number and header version number to 28 for this update.
Github Issues:
* Minor spelling and typography cleanup, add definitions of
ename:VK_FALSE and ename:VK_TRUE as just what their names say
(public issues 220, 318, 325, 365; internal issues 451, 496)
* Clarify that the pname:maxDescriptorSet limits in the
<<features-limits-required,Required Limits>> table are n *
maxPerStage limit (where n=number of supported stages) (public issue
254).
* Minor cleanup to <<boilerplate-platform-macros,Platform-Specific
Macro Definitions>> appendix (public issue 314).
* Add valid usage statement to slink:VkPipelineLayoutCreateInfo
disallowing multiple push constant ranges for the same shader stage
(public issue 340).
* Clarify the elink:VkSharingMode description of what executing the
"same" barriers means in case of ownership transfer (public issue
347).
* Rename copyright.txt and add COPYING.md to try and reduce confusion
about applicable copyrights (public issue 350).
* Extend the table in the <<boilerplate-wsi-header, Window System-Specific
Header Control>> section to describe the external headers included when
each etext:VK_USE_PLATFORM_* macro is defined (public issue 376).
Internal Issues:
* Add "Revision History" to the PDF outputs following the table of
contents, to match HTML outputs (internal issue 43).
* Clarified that flink:vkMapMemory may fail due to virtual address
space limitations (internal issue 346).
* Add +refBody+ comment markup for ref page autoextraction when required
(internal issue 400).
* Document proper use of "mipmap" and "mip" in the style guide API
naming rules, matching the spelling rules (internal issue 471).
* Tweak the <<extensions,Layers and Extensions>> appendix to note that
the Specification may be built with arbitrary combinations of
extensions (internal issue 483).
* Remove incorrect statement allowing
slink:VkClearAttachment::pname:colorAttachment to be >=
slink:VkSubpassDescription::pname:colorAttachmentCount (internal
issue 488).
* The <<features-limits-viewportboundsrange,viewportBoundsRange>> is
expressed in terms of the pname:maxViewportDimensions but this is
actually two values. Clarify that it's based on the larger of the two
(if they differ) (internal issue 499).
Other Issues:
* Reflowed text of the entire spec using the 'reflow' Makefile gater,
to (hopefully) reduce future internal git churn as edits are made
and extensions added in return for one-time pain. This has no
perceptible change on the spec outputs but considerable changes on
the asciidoc source (internal issue 367).
2016-09-24 07:58:11 +00:00
|
|
|
next vertical blanking period to update the current image.
|
|
|
|
Tearing cannot: be observed.
|
|
|
|
An internal single-entry queue is used to hold pending presentation
|
|
|
|
requests.
|
|
|
|
If the queue is full when a new presentation request is received, the
|
|
|
|
new request replaces the existing entry, and any images associated with
|
|
|
|
the prior entry become available for re-use by the application.
|
|
|
|
One request is removed from the queue and processed during each vertical
|
|
|
|
blanking period in which the queue is non-empty.
|
2016-08-28 10:47:19 +00:00
|
|
|
* ename:VK_PRESENT_MODE_FIFO_KHR: The presentation engine waits for the
|
Change log for September 23, 2016 Vulkan 1.0.28 spec update:
* Bump API patch number and header version number to 28 for this update.
Github Issues:
* Minor spelling and typography cleanup, add definitions of
ename:VK_FALSE and ename:VK_TRUE as just what their names say
(public issues 220, 318, 325, 365; internal issues 451, 496)
* Clarify that the pname:maxDescriptorSet limits in the
<<features-limits-required,Required Limits>> table are n *
maxPerStage limit (where n=number of supported stages) (public issue
254).
* Minor cleanup to <<boilerplate-platform-macros,Platform-Specific
Macro Definitions>> appendix (public issue 314).
* Add valid usage statement to slink:VkPipelineLayoutCreateInfo
disallowing multiple push constant ranges for the same shader stage
(public issue 340).
* Clarify the elink:VkSharingMode description of what executing the
"same" barriers means in case of ownership transfer (public issue
347).
* Rename copyright.txt and add COPYING.md to try and reduce confusion
about applicable copyrights (public issue 350).
* Extend the table in the <<boilerplate-wsi-header, Window System-Specific
Header Control>> section to describe the external headers included when
each etext:VK_USE_PLATFORM_* macro is defined (public issue 376).
Internal Issues:
* Add "Revision History" to the PDF outputs following the table of
contents, to match HTML outputs (internal issue 43).
* Clarified that flink:vkMapMemory may fail due to virtual address
space limitations (internal issue 346).
* Add +refBody+ comment markup for ref page autoextraction when required
(internal issue 400).
* Document proper use of "mipmap" and "mip" in the style guide API
naming rules, matching the spelling rules (internal issue 471).
* Tweak the <<extensions,Layers and Extensions>> appendix to note that
the Specification may be built with arbitrary combinations of
extensions (internal issue 483).
* Remove incorrect statement allowing
slink:VkClearAttachment::pname:colorAttachment to be >=
slink:VkSubpassDescription::pname:colorAttachmentCount (internal
issue 488).
* The <<features-limits-viewportboundsrange,viewportBoundsRange>> is
expressed in terms of the pname:maxViewportDimensions but this is
actually two values. Clarify that it's based on the larger of the two
(if they differ) (internal issue 499).
Other Issues:
* Reflowed text of the entire spec using the 'reflow' Makefile gater,
to (hopefully) reduce future internal git churn as edits are made
and extensions added in return for one-time pain. This has no
perceptible change on the spec outputs but considerable changes on
the asciidoc source (internal issue 367).
2016-09-24 07:58:11 +00:00
|
|
|
next vertical blanking period to update the current image.
|
|
|
|
Tearing cannot: be observed.
|
|
|
|
An internal queue is used to hold pending presentation requests.
|
|
|
|
New requests are appended to the end of the queue, and one request is
|
|
|
|
removed from the beginning of the queue and processed during each
|
|
|
|
vertical blanking period in which the queue is non-empty.
|
2016-08-28 10:47:19 +00:00
|
|
|
This is the only value of pname:presentMode that is required: to be
|
|
|
|
supported.
|
|
|
|
* ename:VK_PRESENT_MODE_FIFO_RELAXED_KHR: The presentation engine
|
Change log for September 23, 2016 Vulkan 1.0.28 spec update:
* Bump API patch number and header version number to 28 for this update.
Github Issues:
* Minor spelling and typography cleanup, add definitions of
ename:VK_FALSE and ename:VK_TRUE as just what their names say
(public issues 220, 318, 325, 365; internal issues 451, 496)
* Clarify that the pname:maxDescriptorSet limits in the
<<features-limits-required,Required Limits>> table are n *
maxPerStage limit (where n=number of supported stages) (public issue
254).
* Minor cleanup to <<boilerplate-platform-macros,Platform-Specific
Macro Definitions>> appendix (public issue 314).
* Add valid usage statement to slink:VkPipelineLayoutCreateInfo
disallowing multiple push constant ranges for the same shader stage
(public issue 340).
* Clarify the elink:VkSharingMode description of what executing the
"same" barriers means in case of ownership transfer (public issue
347).
* Rename copyright.txt and add COPYING.md to try and reduce confusion
about applicable copyrights (public issue 350).
* Extend the table in the <<boilerplate-wsi-header, Window System-Specific
Header Control>> section to describe the external headers included when
each etext:VK_USE_PLATFORM_* macro is defined (public issue 376).
Internal Issues:
* Add "Revision History" to the PDF outputs following the table of
contents, to match HTML outputs (internal issue 43).
* Clarified that flink:vkMapMemory may fail due to virtual address
space limitations (internal issue 346).
* Add +refBody+ comment markup for ref page autoextraction when required
(internal issue 400).
* Document proper use of "mipmap" and "mip" in the style guide API
naming rules, matching the spelling rules (internal issue 471).
* Tweak the <<extensions,Layers and Extensions>> appendix to note that
the Specification may be built with arbitrary combinations of
extensions (internal issue 483).
* Remove incorrect statement allowing
slink:VkClearAttachment::pname:colorAttachment to be >=
slink:VkSubpassDescription::pname:colorAttachmentCount (internal
issue 488).
* The <<features-limits-viewportboundsrange,viewportBoundsRange>> is
expressed in terms of the pname:maxViewportDimensions but this is
actually two values. Clarify that it's based on the larger of the two
(if they differ) (internal issue 499).
Other Issues:
* Reflowed text of the entire spec using the 'reflow' Makefile gater,
to (hopefully) reduce future internal git churn as edits are made
and extensions added in return for one-time pain. This has no
perceptible change on the spec outputs but considerable changes on
the asciidoc source (internal issue 367).
2016-09-24 07:58:11 +00:00
|
|
|
generally waits for the next vertical blanking period to update the
|
|
|
|
current image.
|
|
|
|
If a vertical blanking period has already passed since the last update
|
|
|
|
of the current image then the presentation engine does not wait for
|
|
|
|
another vertical blanking period for the update, meaning this mode may:
|
|
|
|
result in visible tearing in this case.
|
|
|
|
This mode is useful for reducing visual stutter with an application that
|
|
|
|
will mostly present a new image before the next vertical blanking
|
|
|
|
period, but may occasionally be late, and present a new image just after
|
|
|
|
the next vertical blanking period.
|
|
|
|
An internal queue is used to hold pending presentation requests.
|
|
|
|
New requests are appended to the end of the queue, and one request is
|
2016-08-28 10:47:19 +00:00
|
|
|
removed from the beginning of the queue and processed during or after
|
|
|
|
each vertical blanking period in which the queue is non-empty.
|
|
|
|
|
|
|
|
[NOTE]
|
|
|
|
.Note
|
|
|
|
====
|
|
|
|
For reference, the mode indicated by ename:VK_PRESENT_MODE_FIFO_KHR is
|
|
|
|
equivalent to the behavior of {wgl|glX|egl}SwapBuffers with a swap interval
|
|
|
|
of 1, while the mode indicated by ename:VK_PRESENT_MODE_FIFO_RELAXED_KHR is
|
Change log for September 23, 2016 Vulkan 1.0.28 spec update:
* Bump API patch number and header version number to 28 for this update.
Github Issues:
* Minor spelling and typography cleanup, add definitions of
ename:VK_FALSE and ename:VK_TRUE as just what their names say
(public issues 220, 318, 325, 365; internal issues 451, 496)
* Clarify that the pname:maxDescriptorSet limits in the
<<features-limits-required,Required Limits>> table are n *
maxPerStage limit (where n=number of supported stages) (public issue
254).
* Minor cleanup to <<boilerplate-platform-macros,Platform-Specific
Macro Definitions>> appendix (public issue 314).
* Add valid usage statement to slink:VkPipelineLayoutCreateInfo
disallowing multiple push constant ranges for the same shader stage
(public issue 340).
* Clarify the elink:VkSharingMode description of what executing the
"same" barriers means in case of ownership transfer (public issue
347).
* Rename copyright.txt and add COPYING.md to try and reduce confusion
about applicable copyrights (public issue 350).
* Extend the table in the <<boilerplate-wsi-header, Window System-Specific
Header Control>> section to describe the external headers included when
each etext:VK_USE_PLATFORM_* macro is defined (public issue 376).
Internal Issues:
* Add "Revision History" to the PDF outputs following the table of
contents, to match HTML outputs (internal issue 43).
* Clarified that flink:vkMapMemory may fail due to virtual address
space limitations (internal issue 346).
* Add +refBody+ comment markup for ref page autoextraction when required
(internal issue 400).
* Document proper use of "mipmap" and "mip" in the style guide API
naming rules, matching the spelling rules (internal issue 471).
* Tweak the <<extensions,Layers and Extensions>> appendix to note that
the Specification may be built with arbitrary combinations of
extensions (internal issue 483).
* Remove incorrect statement allowing
slink:VkClearAttachment::pname:colorAttachment to be >=
slink:VkSubpassDescription::pname:colorAttachmentCount (internal
issue 488).
* The <<features-limits-viewportboundsrange,viewportBoundsRange>> is
expressed in terms of the pname:maxViewportDimensions but this is
actually two values. Clarify that it's based on the larger of the two
(if they differ) (internal issue 499).
Other Issues:
* Reflowed text of the entire spec using the 'reflow' Makefile gater,
to (hopefully) reduce future internal git churn as edits are made
and extensions added in return for one-time pain. This has no
perceptible change on the spec outputs but considerable changes on
the asciidoc source (internal issue 367).
2016-09-24 07:58:11 +00:00
|
|
|
equivalent to the behavior of {wgl|glX}SwapBuffers with a swap interval of
|
|
|
|
-1 (from the {WGL|GLX}_EXT_swap_control_tear extensions).
|
2016-08-28 10:47:19 +00:00
|
|
|
====
|
|
|
|
|
|
|
|
// refEnd VkPresentModeKHR
|
|
|
|
|
|
|
|
ifdef::VK_KHR_swapchain[]
|
|
|
|
include::../VK_KHR_swapchain/wsi.txt[]
|
|
|
|
endif::VK_KHR_swapchain[]
|