Vulkan-Docs/chapters/renderpass.txt

// Copyright (c) 2015-2018 Khronos Group. This work is licensed under a
// Creative Commons Attribution 4.0 International License; see
// http://creativecommons.org/licenses/by/4.0/

[[renderpass]]
= Render Pass

[open,refpage='VkRenderPass',desc='Opaque handle to a render pass object',type='handles']
--

A _render pass_ represents a collection of attachments, subpasses, and
dependencies between the subpasses, and describes how the attachments are
used over the course of the subpasses.
The use of a render pass in a command buffer is a _render pass instance_.

Render passes are represented by sname:VkRenderPass handles:

include::../api/handles/VkRenderPass.txt[]

--

An _attachment description_ describes the properties of an attachment
including its format, sample count, and how its contents are treated at the
beginning and end of each render pass instance.

[[renderpass-subpass]]
A _subpass_ represents a phase of rendering that reads and writes a subset
of the attachments in a render pass.
Rendering commands are recorded into a particular subpass of a render pass
instance.

A _subpass description_ describes the subset of attachments that is involved
in the execution of a subpass.
Each subpass can: read from some attachments as _input attachments_, write
to some as _color attachments_ or _depth/stencil attachments_, and perform
_multisample resolve operations_ to _resolve attachments_.
A subpass description can: also include a set of _preserve attachments_,
which are attachments that are not read or written by the subpass but whose
contents must: be preserved throughout the subpass.

A subpass _uses an attachment_ if the attachment is a color, depth/stencil,
resolve, or input attachment for that subpass (as determined by the
pname:pColorAttachments, pname:pDepthStencilAttachment,
pname:pResolveAttachments, and pname:pInputAttachments members of
slink:VkSubpassDescription, respectively).
A subpass does not use an attachment if that attachment is preserved by the
subpass.
The _first use of an attachment_ is in the lowest numbered subpass that uses
that attachment.
Similarly, the _last use of an attachment_ is in the highest numbered
subpass that uses that attachment.

The subpasses in a render pass all render to the same dimensions, and
fragments for pixel (x,y,layer) in one subpass can: only read attachment
contents written by previous subpasses at that same (x,y,layer) location.

[NOTE]
.Note
====
By describing a complete set of subpasses in advance, render passes provide
the implementation an opportunity to optimize the storage and transfer of
attachment data between subpasses.

In practice, this means that subpasses with a simple framebuffer-space
dependency may: be merged into a single tiled rendering pass, keeping the
attachment data on-chip for the duration of a render pass instance.
However, it is also quite common for a render pass to only contain a single
subpass.
====

_Subpass dependencies_ describe <<synchronization-dependencies, execution
and memory dependencies>> between subpasses.

A _subpass dependency chain_ is a sequence of subpass dependencies in a
render pass, where the source subpass of each subpass dependency (after the
first) equals the destination subpass of the previous dependency.

Execution of subpasses may: overlap or execute out of order with regards to
other subpasses, unless otherwise enforced by an execution dependency.
Each subpass only respects <<synchronization-submission-order, submission
order>> for commands recorded in the same subpass, and the
flink:vkCmdBeginRenderPass and flink:vkCmdEndRenderPass commands that
delimit the render pass - commands within other subpasses are not included.
This affects most other <<synchronization-implicit, implicit ordering
guarantees>>.

A render pass describes the structure of subpasses and attachments
independent of any specific image views for the attachments.
The specific image views that will be used for the attachments, and their
dimensions, are specified in sname:VkFramebuffer objects.
Framebuffers are created with respect to a specific render pass that the
framebuffer is compatible with (see <<renderpass-compatibility,Render Pass
Compatibility>>).
Collectively, a render pass and a framebuffer define the complete render
target state for one or more subpasses as well as the algorithmic
dependencies between the subpasses.

The various pipeline stages of the drawing commands for a given subpass may:
execute concurrently and/or out of order, both within and across drawing
commands, whilst still respecting <<synchronization-pipeline-stages-order,
pipeline order>>.
However for a given (x,y,layer,sample) sample location, certain per-sample
operations are performed in <<primrast-order,rasterization order>>.


[[renderpass-creation]]
== Render Pass Creation

[open,refpage='vkCreateRenderPass',desc='Create a new render pass object',type='protos']
--

To create a render pass, call:

include::../api/protos/vkCreateRenderPass.txt[]

  * pname:device is the logical device that creates the render pass.
  * pname:pCreateInfo is a pointer to an instance of the
    slink:VkRenderPassCreateInfo structure that describes the parameters of
    the render pass.
  * pname:pAllocator controls host memory allocation as described in the
    <<memory-allocation, Memory Allocation>> chapter.
  * pname:pRenderPass points to a sname:VkRenderPass handle in which the
    resulting render pass object is returned.

include::../validity/protos/vkCreateRenderPass.txt[]
--

[open,refpage='VkRenderPassCreateInfo',desc='Structure specifying parameters of a newly created render pass',type='structs']
--

The sname:VkRenderPassCreateInfo structure is defined as:

include::../api/structs/VkRenderPassCreateInfo.txt[]

  * pname:sType is the type of this structure.
  * pname:pNext is `NULL` or a pointer to an extension-specific structure.
  * pname:flags is reserved for future use.
  * pname:attachmentCount is the number of attachments used by this render
    pass, or zero indicating no attachments.
    Attachments are referred to by zero-based indices in the range
    [0,pname:attachmentCount).
  * pname:pAttachments points to an array of pname:attachmentCount number of
    slink:VkAttachmentDescription structures describing properties of the
    attachments, or `NULL` if pname:attachmentCount is zero.
  * pname:subpassCount is the number of subpasses to create for this render
    pass.
    Subpasses are referred to by zero-based indices in the range
    [0,pname:subpassCount).
    A render pass must: have at least one subpass.
  * pname:pSubpasses points to an array of pname:subpassCount number of
    slink:VkSubpassDescription structures describing properties of the
    subpasses.
  * pname:dependencyCount is the number of dependencies between pairs of
    subpasses, or zero indicating no dependencies.
  * pname:pDependencies points to an array of pname:dependencyCount number
    of slink:VkSubpassDependency structures describing dependencies between
    pairs of subpasses, or `NULL` if pname:dependencyCount is zero.

.Valid Usage
****
  * [[VUID-VkRenderPassCreateInfo-None-00832]]
    If any two subpasses operate on attachments with overlapping ranges of
    the same sname:VkDeviceMemory object, and at least one subpass writes to
    that area of sname:VkDeviceMemory, a subpass dependency must: be
    included (either directly or via some intermediate subpasses) between
    them
  * [[VUID-VkRenderPassCreateInfo-attachment-00833]]
    If the pname:attachment member of any element of
    pname:pInputAttachments, pname:pColorAttachments,
    pname:pResolveAttachments or pname:pDepthStencilAttachment, or the
    attachment indexed by any element of pname:pPreserveAttachments in any
    element of pname:pSubpasses is bound to a range of a
    sname:VkDeviceMemory object that overlaps with any other attachment in
    any subpass (including the same subpass), the
    sname:VkAttachmentDescription structures describing them must: include
    ename:VK_ATTACHMENT_DESCRIPTION_MAY_ALIAS_BIT in pname:flags
  * [[VUID-VkRenderPassCreateInfo-attachment-00834]]
    If the pname:attachment member of any element of
    pname:pInputAttachments, pname:pColorAttachments,
    pname:pResolveAttachments or pname:pDepthStencilAttachment, or any
    element of pname:pPreserveAttachments in any element of pname:pSubpasses
    is not ename:VK_ATTACHMENT_UNUSED, it must: be less than
    pname:attachmentCount
  * [[VUID-VkRenderPassCreateInfo-pPreserveAttachments-00835]]
    The value of each element of the pname:pPreserveAttachments member in
    each element of pname:pSubpasses must: not be ename:VK_ATTACHMENT_UNUSED
  * [[VUID-VkRenderPassCreateInfo-pAttachments-00836]]
    For any member of pname:pAttachments with a pname:loadOp equal to
    ename:VK_ATTACHMENT_LOAD_OP_CLEAR, the first use of that attachment
    must: not specify a pname:layout equal to
    pname:VK_IMAGE_LAYOUT_SHADER_READ_ONLY_OPTIMAL or
    pname:VK_IMAGE_LAYOUT_DEPTH_STENCIL_READ_ONLY_OPTIMAL.
ifdef::VK_VERSION_1_1,VK_KHR_maintenance2[]
  * [[VUID-VkRenderPassCreateInfo-pAttachments-01566]]
    For any member of pname:pAttachments with a pname:loadOp equal to
    ename:VK_ATTACHMENT_LOAD_OP_CLEAR, the first use of that attachment
    must: not specify a pname:layout equal to
    pname:VK_IMAGE_LAYOUT_DEPTH_READ_ONLY_STENCIL_ATTACHMENT_OPTIMAL.
  * [[VUID-VkRenderPassCreateInfo-pAttachments-01567]]
    For any member of pname:pAttachments with a pname:stencilLoadOp equal to
    ename:VK_ATTACHMENT_LOAD_OP_CLEAR, the first use of that attachment
    must: not specify a pname:layout equal to
    pname:VK_IMAGE_LAYOUT_DEPTH_ATTACHMENT_STENCIL_READ_ONLY_OPTIMAL.
  * [[VUID-VkRenderPassCreateInfo-pNext-01926]]
    If the pname:pNext chain includes an instance of
    slink:VkRenderPassInputAttachmentAspectCreateInfo, the pname:subpass
    member of each element of its pname:pAspectReferences member must: be
    less than pname:subpassCount
  * [[VUID-VkRenderPassCreateInfo-pNext-01927]]
    If the pname:pNext chain includes an instance of
    slink:VkRenderPassInputAttachmentAspectCreateInfo, the
    pname:inputAttachmentIndex member of each element of its
    pname:pAspectReferences member must: be less than the value of
    pname:inputAttachmentCount in the member of pname:pSubpasses identified
    by its pname:subpass member
endif::VK_VERSION_1_1,VK_KHR_maintenance2[]
ifdef::VK_VERSION_1_1,VK_KHR_multiview[]
  * [[VUID-VkRenderPassCreateInfo-pNext-01928]]
    If the pname:pNext chain includes an instance of
    slink:VkRenderPassMultiviewCreateInfo, and its pname:subpassCount member
    is not zero, that member must: be equal to the value of
    pname:subpassCount
  * [[VUID-VkRenderPassCreateInfo-pNext-01929]]
    If the pname:pNext chain includes an instance of
    slink:VkRenderPassMultiviewCreateInfo, if its pname:dependencyCount
    member is not zero, it must: be equal to pname:dependencyCount
  * [[VUID-VkRenderPassCreateInfo-pNext-01930]]
    If the pname:pNext chain includes an instance of
    slink:VkRenderPassMultiviewCreateInfo, for each non-zero element of
    pname:pViewOffsets, the pname:srcSubpass and pname:dstSubpass members of
    pname:pDependencies at the same index must: not be equal
endif::VK_VERSION_1_1,VK_KHR_multiview[]
  * [[VUID-VkRenderPassCreateInfo-pDependencies-00837]]
    For any element of pname:pDependencies, if the pname:srcSubpass is not
    ename:VK_SUBPASS_EXTERNAL, all stage flags included in the
    pname:srcStageMask member of that dependency must: be a pipeline stage
    supported by the <<synchronization-pipeline-stages-types, pipeline>>
    identified by the pname:pipelineBindPoint member of the source subpass.
  * [[VUID-VkRenderPassCreateInfo-pDependencies-00838]]
    For any element of pname:pDependencies, if the pname:dstSubpass is not
    ename:VK_SUBPASS_EXTERNAL, all stage flags included in the
    pname:dstStageMask member of that dependency must: be a pipeline stage
    supported by the <<synchronization-pipeline-stages-types, pipeline>>
    identified by the pname:pipelineBindPoint member of the source subpass.
****

include::../validity/structs/VkRenderPassCreateInfo.txt[]
--

[open,refpage='VkRenderPassCreateFlags',desc='Reserved for future use',type='enums']
--
include::../api/flags/VkRenderPassCreateFlags.txt[]

sname:VkRenderPassCreateFlags is a bitmask type for setting a mask, but is
currently reserved for future use.
--

ifdef::VK_VERSION_1_1,VK_KHR_multiview[]

[[renderpass-multiview]]
[open,refpage='VkRenderPassMultiviewCreateInfo',desc='Structure containing multiview info for all subpasses',type='structs']
--

If the sname:VkRenderPassCreateInfo::pname:pNext chain includes a
sname:VkRenderPassMultiviewCreateInfo structure, then that structure
includes an array of view masks, view offsets, and correlation masks for the
render pass.

The sname:VkRenderPassMultiviewCreateInfo structure is defined as:

include::../api/structs/VkRenderPassMultiviewCreateInfo.txt[]

ifdef::VK_KHR_multiview[]
or the equivalent

include::../api/structs/VkRenderPassMultiviewCreateInfoKHR.txt[]
endif::VK_KHR_multiview[]

  * pname:sType is the type of this structure.
  * pname:pNext is `NULL` or a pointer to an extension-specific structure.
  * pname:subpassCount is zero or is the number of subpasses in the render
    pass.
  * pname:pViewMasks points to an array of pname:subpassCount number of view
    masks, where each mask is a bitfield of view indices describing which
    views rendering is broadcast to in each subpass, when multiview is
    enabled.
    If pname:subpassCount is zero, each view mask is treated as zero.
  * pname:dependencyCount is zero or the number of dependencies in the
    render pass.
  * pname:pViewOffsets points to an array of pname:dependencyCount view
    offsets, one for each dependency.
    If pname:dependencyCount is zero, each dependency's view offset is
    treated as zero.
    Each view offset controls which views in the source subpass the views in
    the destination subpass depend on.
  * pname:correlationMaskCount is zero or a number of correlation masks.
  * pname:pCorrelationMasks is an array of view masks indicating sets of
    views that may: be more efficient to render concurrently.

When a subpass uses a non-zero view mask, _multiview_ functionality is
considered to be enabled.
Multiview is all-or-nothing for a render pass - that is, either all
subpasses must: have a non-zero view mask (though some subpasses may: have
only one view) or all must: be zero.
Multiview causes all drawing and clear commands in the subpass to behave as
if they were broadcast to each view, where a view is represented by one
layer of the framebuffer attachments.
All draws and clears are broadcast to each _view index_ whose bit is set in
the view mask.
The view index is provided in the code:ViewIndex shader input variable, and
color, depth/stencil, and input attachments all read/write the layer of the
framebuffer corresponding to the view index.

If the view mask is zero for all subpasses, multiview is considered to be
disabled and all drawing commands execute normally, without this additional
broadcasting.

Some implementations may: not support multiview in conjunction with
<<features-features-multiview-gs,geometry shaders>> or
<<features-features-multiview-tess,tessellation shaders>>.

[[renderpass-multiview-view-local]]
When multiview is enabled, the ename:VK_DEPENDENCY_VIEW_LOCAL_BIT bit in a
dependency can: be used to express a view-local dependency, meaning that
each view in the destination subpass depends on a single view in the source
subpass.
Unlike pipeline barriers, a subpass dependency can: potentially have a
different view mask in the source subpass and the destination subpass.
If the dependency is view-local, then each view ([eq]#dstView#) in the
destination subpass depends on the view [eq]#dstView {plus}
pViewOffsets[dependency]# in the source subpass.
If there is not such a view in the source subpass, then this dependency does
not affect that view in the destination subpass.
If the dependency is not view-local, then all views in the destination
subpass depend on all views in the source subpass, and the view offset is
ignored.
A non-zero view offset is not allowed in a self-dependency.

The elements of pname:pCorrelationMasks are a set of masks of views
indicating that views in the same mask may: exhibit spatial coherency
between the views, making it more efficient to render them concurrently.
Correlation masks must: not have a functional effect on the results of the
multiview rendering.

When multiview is enabled, at the beginning of each subpass all non-render
pass state is undefined.
In particular, each time flink:vkCmdBeginRenderPass or
flink:vkCmdNextSubpass is called the graphics pipeline must: be bound, any
relevant descriptor sets or vertex/index buffers must: be bound, and any
relevant dynamic state or push constants must: be set before they are used.

ifdef::VK_NVX_multiview_per_view_attributes[]

A multiview subpass can: declare that its shaders will write per-view
attributes for all views in a single invocation, by setting the
ename:VK_SUBPASS_DESCRIPTION_PER_VIEW_ATTRIBUTES_BIT_NVX bit in the subpass
description.
The only supported per-view attributes are position and viewport mask, and
per-view position and viewport masks are written to output array variables
decorated with code:PositionPerViewNV and code:ViewportMaskPerViewNV,
respectively.
If `<<VK_NV_viewport_array2>>` is not supported and enabled,
code:ViewportMaskPerViewNV must: not be used.
Values written to elements of code:PositionPerViewNV and
code:ViewportMaskPerViewNV must: not depend on the code:ViewIndex.
The shader must: also write to an output variable decorated with
code:Position, and the value written to code:Position must: equal the value
written to code:PositionPerViewNV[code:ViewIndex].
Similarly, if code:ViewportMaskPerViewNV is written to then the shader must:
also write to an output variable decorated with code:ViewportMaskNV, and the
value written to code:ViewportMaskNV must: equal the value written to
code:ViewportMaskPerViewNV[code:ViewIndex].
Implementations will either use values taken from code:Position and
code:ViewportMaskNV and invoke the shader once for each view, or will use
values taken from code:PositionPerViewNV and code:ViewportMaskPerViewNV and
invoke the shader fewer times.
The values written to code:Position and code:ViewportMaskNV must: not depend
on the values written to code:PositionPerViewNV and
code:ViewportMaskPerViewNV, or vice versa (to allow compilers to eliminate
the unused outputs).
All attributes that do not have *PerViewNV counterparts must: not depend on
code:ViewIndex.

Per-view attributes are all-or-nothing for a subpass.
That is, all pipelines compiled against a subpass that includes the
ename:VK_SUBPASS_DESCRIPTION_PER_VIEW_ATTRIBUTES_BIT_NVX bit must: write
per-view attributes to the *PerViewNV[] shader outputs, in addition to the
non-per-view (e.g. code:Position) outputs.
Pipelines compiled against a subpass that does not include this bit must:
not include the *PerViewNV[] outputs in their interfaces.

endif::VK_NVX_multiview_per_view_attributes[]

.Valid Usage
****
  * [[VUID-VkRenderPassMultiviewCreateInfo-pCorrelationMasks-00841]]
    Each view index must: not be set in more than one element of
    pname:pCorrelationMasks
****

include::../validity/structs/VkRenderPassMultiviewCreateInfo.txt[]
--

endif::VK_VERSION_1_1,VK_KHR_multiview[]

[open,refpage='VkAttachmentDescription',desc='Structure specifying an attachment description',type='structs']
--

The sname:VkAttachmentDescription structure is defined as:

include::../api/structs/VkAttachmentDescription.txt[]

  * pname:flags is a bitmask of elink:VkAttachmentDescriptionFlagBits
    specifying additional properties of the attachment.
  * pname:format is a elink:VkFormat value specifying the format of the
    image view that will be used for the attachment.
  * pname:samples is the number of samples of the image as defined in
    elink:VkSampleCountFlagBits.
  * pname:loadOp is a elink:VkAttachmentLoadOp value specifying how the
    contents of color and depth components of the attachment are treated at
    the beginning of the subpass where it is first used.
  * pname:storeOp is a elink:VkAttachmentStoreOp value specifying how the
    contents of color and depth components of the attachment are treated at
    the end of the subpass where it is last used.
  * pname:stencilLoadOp is a elink:VkAttachmentLoadOp value specifying how
    the contents of stencil components of the attachment are treated at the
    beginning of the subpass where it is first used.
  * pname:stencilStoreOp is a elink:VkAttachmentStoreOp value specifying how
    the contents of stencil components of the attachment are treated at the
    end of the last subpass where it is used.
  * pname:initialLayout is the layout the attachment image subresource will
    be in when a render pass instance begins.
  * pname:finalLayout is the layout the attachment image subresource will be
    transitioned to when a render pass instance ends.
    During a render pass instance, an attachment can: use a different layout
    in each subpass, if desired.

[[renderpass-load-store-ops]]
If the attachment uses a color format, then pname:loadOp and pname:storeOp
are used, and pname:stencilLoadOp and pname:stencilStoreOp are ignored.
If the format has depth and/or stencil components, pname:loadOp and
pname:storeOp apply only to the depth data, while pname:stencilLoadOp and
pname:stencilStoreOp define how the stencil data is handled.
pname:loadOp and pname:stencilLoadOp define the _load operations_ that
execute as part of the first subpass that uses the attachment.
pname:storeOp and pname:stencilStoreOp define the _store operations_ that
execute as part of the last subpass that uses the attachment.

The load operation for each sample in an attachment happens-before any
recorded command which accesses the sample in the first subpass where the
attachment is used.
Load operations for attachments with a depth/stencil format execute in the
ename:VK_PIPELINE_STAGE_EARLY_FRAGMENT_TESTS_BIT pipeline stage.
Load operations for attachments with a color format execute in the
ename:VK_PIPELINE_STAGE_COLOR_ATTACHMENT_OUTPUT_BIT pipeline stage.

The store operation for each sample in an attachment happens-after any
recorded command which accesses the sample in the last subpass where the
attachment is used.
Store operations for attachments with a depth/stencil format execute in the
ename:VK_PIPELINE_STAGE_LATE_FRAGMENT_TESTS_BIT pipeline stage.
Store operations for attachments with a color format execute in the
ename:VK_PIPELINE_STAGE_COLOR_ATTACHMENT_OUTPUT_BIT pipeline stage.

If an attachment is not used by any subpass, then pname:loadOp,
pname:storeOp, pname:stencilStoreOp, and pname:stencilLoadOp are ignored,
and the attachment's memory contents will not be modified by execution of a
render pass instance.

ifdef::VK_VERSION_1_1,VK_KHR_multiview[]

The load and store operations apply on the first and last use of each view
in the render pass, respectively.
If a view index of an attachment is not included in the view mask in any
subpass that uses it, then the load and store operations are ignored, and
the attachment's memory contents will not be modified by execution of a
render pass instance.

endif::VK_VERSION_1_1,VK_KHR_multiview[]

[[renderpass-precision]]
During a render pass instance, input/color attachments with color formats
that have a component size of 8, 16, or 32 bits must: be represented in the
attachment's format throughout the instance.
Attachments with other floating- or fixed-point color formats, or with depth
components may: be represented in a format with a precision higher than the
attachment format, but must: be represented with the same range.
When such a component is loaded via the pname:loadOp, it will be converted
into an implementation-dependent format used by the render pass.
Such components must: be converted from the render pass format, to the
format of the attachment, before they are resolved or stored at the end of a
render pass instance via pname:storeOp.
Conversions occur as described in <<fundamentals-numerics,Numeric
Representation and Computation>> and <<fundamentals-fixedconv, Fixed-Point
Data Conversions>>.

[[renderpass-aliasing]]
If pname:flags includes ename:VK_ATTACHMENT_DESCRIPTION_MAY_ALIAS_BIT, then
the attachment is treated as if it shares physical memory with another
attachment in the same render pass.
This information limits the ability of the implementation to reorder certain
operations (like layout transitions and the pname:loadOp) such that it is
not improperly reordered against other uses of the same physical memory via
a different attachment.
This is described in more detail below.

.Valid Usage
****
  * [[VUID-VkAttachmentDescription-finalLayout-00843]]
    pname:finalLayout must: not be ename:VK_IMAGE_LAYOUT_UNDEFINED or
    ename:VK_IMAGE_LAYOUT_PREINITIALIZED
****

include::../validity/structs/VkAttachmentDescription.txt[]
--

ifdef::VK_VERSION_1_1,VK_KHR_maintenance2[]

[open,refpage='VkRenderPassInputAttachmentAspectCreateInfo',desc='Structure specifying, for a given subpass/input attachment pair, which aspect can: be read.',type='structs']
--

To specify which aspects of an input attachment can: be read add a
slink:VkRenderPassInputAttachmentAspectCreateInfo structure to the
pname:pNext chain of the slink:VkRenderPassCreateInfo structure:

The sname:VkRenderPassInputAttachmentAspectCreateInfo structure is defined
as:

include::../api/structs/VkRenderPassInputAttachmentAspectCreateInfo.txt[]

ifdef::VK_KHR_maintenance2[]
or the equivalent

include::../api/structs/VkRenderPassInputAttachmentAspectCreateInfoKHR.txt[]
endif::VK_KHR_maintenance2[]

  * pname:sType is the type of this structure.
  * pname:pNext is `NULL` or a pointer to an extension-specific structure.
  * pname:aspectReferenceCount is the number of elements in the
    pAspectReferences array.
  * pname:pAspectReferences points to an array of pname:aspectReferenceCount
    number of slink:VkInputAttachmentAspectReference structures describing
    which aspect(s) can: be accessed for a given input attachment within a
    given subpass.

include::../validity/structs/VkRenderPassInputAttachmentAspectCreateInfo.txt[]
--

[open,refpage='VkInputAttachmentAspectReference',desc='Structure specifying a subpass/input attachment pair and an aspect mask that can: be read.',type='structs']
--

The sname:VkInputAttachmentAspectReference structure specifies an aspect
mask for a specific input attachment of a specific subpass in the render
pass.

pname:subpass and pname:inputAttachmentIndex index into the render pass as:

pname:pCreateInfo::pname:pSubpasses[pname:subpass].pname:pInputAttachments[pname:inputAttachmentIndex]

include::../api/structs/VkInputAttachmentAspectReference.txt[]

ifdef::VK_KHR_maintenance2[]
or the equivalent

include::../api/structs/VkInputAttachmentAspectReferenceKHR.txt[]
endif::VK_KHR_maintenance2[]

  * pname:subpass is an index into the pname:pSubpasses array of the parent
    sname:VkRenderPassCreateInfo structure.
  * pname:inputAttachmentIndex is an index into the pname:pInputAttachments
    of the specified subpass.
  * pname:aspectMask is a mask of which aspect(s) can: be accessed within
    the specified subpass.

.Valid Usage
****
  * [[VUID-VkInputAttachmentAspectReference-pCreateInfo-01568]]
    There must: be an input attachment at
    pname:pCreateInfo::pname:pSubpasses[pname:subpass].pname:pInputAttachments[pname:inputAttachmentIndex].
  * [[VUID-VkInputAttachmentAspectReference-None-01569]]
    The specified input attachment must: have more than one aspect mask.
  * [[VUID-VkInputAttachmentAspectReference-aspectMask-01570]]
    pname:aspectMask must: be a subset of the aspect masks in the specified
    input attachment.
****

include::../validity/structs/VkInputAttachmentAspectReference.txt[]
--

ifdef::editing-notes[]
[NOTE]
.editing-note
====
TODO (Jon) - it's unclear whether the following two paragraphs are intended
to apply to slink:VkAttachmentDescription, one of the extension structures
described immediately above, or something else.
The following description of elink:VkAttachmentDescriptionFlagBits should:
probably be moved up to near slink:VkAttachmentDescription.
====
endif::editing-notes[]

An application must: only access the specified aspect(s).

An application can: access any aspect of an input attachment that does not
have a specified aspect mask.

endif::VK_VERSION_1_1,VK_KHR_maintenance2[]

[open,refpage='VkAttachmentDescriptionFlagBits',desc='Bitmask specifying additional properties of an attachment',type='enums']
--

Bits which can: be set in slink:VkAttachmentDescription::pname:flags
describing additional properties of the attachment are:

include::../api/enums/VkAttachmentDescriptionFlagBits.txt[]

  * ename:VK_ATTACHMENT_DESCRIPTION_MAY_ALIAS_BIT specifies that the
    attachment aliases the same device memory as other attachments.

--

[open,refpage='VkAttachmentDescriptionFlags',desc='Bitmask of VkAttachmentDescriptionFlagBits',type='enums']
--
include::../api/flags/VkAttachmentDescriptionFlags.txt[]

sname:VkAttachmentDescriptionFlags is a bitmask type for setting a mask of
zero or more slink:VkAttachmentDescriptionFlagBits.
--

[open,refpage='VkAttachmentLoadOp',desc='Specify how contents of an attachment are treated at the beginning of a subpass',type='enums']
--

Possible values of slink:VkAttachmentDescription::pname:loadOp and
pname:stencilLoadOp, specifying how the contents of the attachment are
treated, are:

include::../api/enums/VkAttachmentLoadOp.txt[]

  * ename:VK_ATTACHMENT_LOAD_OP_LOAD specifies that the previous contents of
    the image within the render area will be preserved.
    For attachments with a depth/stencil format, this uses the access type
    ename:VK_ACCESS_DEPTH_STENCIL_ATTACHMENT_READ_BIT.
    For attachments with a color format, this uses the access type
    ename:VK_ACCESS_COLOR_ATTACHMENT_READ_BIT.
  * ename:VK_ATTACHMENT_LOAD_OP_CLEAR specifies that the contents within the
    render area will be cleared to a uniform value, which is specified when
    a render pass instance is begun.
    For attachments with a depth/stencil format, this uses the access type
    ename:VK_ACCESS_DEPTH_STENCIL_ATTACHMENT_WRITE_BIT.
    For attachments with a color format, this uses the access type
    ename:VK_ACCESS_COLOR_ATTACHMENT_WRITE_BIT.
  * ename:VK_ATTACHMENT_LOAD_OP_DONT_CARE specifies that the previous
    contents within the area need not be preserved; the contents of the
    attachment will be undefined inside the render area.
    For attachments with a depth/stencil format, this uses the access type
    ename:VK_ACCESS_DEPTH_STENCIL_ATTACHMENT_WRITE_BIT.
    For attachments with a color format, this uses the access type
    ename:VK_ACCESS_COLOR_ATTACHMENT_WRITE_BIT.

--

[open,refpage='VkAttachmentStoreOp',desc='Specify how contents of an attachment are treated at the end of a subpass',type='enums']
--

Possible values of slink:VkAttachmentDescription::pname:storeOp and
pname:stencilStoreOp, specifying how the contents of the attachment are
treated, are:

include::../api/enums/VkAttachmentStoreOp.txt[]

  * ename:VK_ATTACHMENT_STORE_OP_STORE specifies the contents generated
    during the render pass and within the render area are written to memory.
    For attachments with a depth/stencil format, this uses the access type
    ename:VK_ACCESS_DEPTH_STENCIL_ATTACHMENT_WRITE_BIT.
    For attachments with a color format, this uses the access type
    ename:VK_ACCESS_COLOR_ATTACHMENT_WRITE_BIT.
  * ename:VK_ATTACHMENT_STORE_OP_DONT_CARE specifies the contents within the
    render area are not needed after rendering, and may: be discarded; the
    contents of the attachment will be undefined inside the render area.
    For attachments with a depth/stencil format, this uses the access type
    ename:VK_ACCESS_DEPTH_STENCIL_ATTACHMENT_WRITE_BIT.
    For attachments with a color format, this uses the access type
    ename:VK_ACCESS_COLOR_ATTACHMENT_WRITE_BIT.

--

ifdef::editing-notes[]
[NOTE]
.editing-note
====
TODO (Jon) - the following text may need to be moved back to combine with
flink:vkCreateRenderPass above for automatic ref page generation.
====
endif::editing-notes[]

If a render pass uses multiple attachments that alias the same device
memory, those attachments must: each include the
ename:VK_ATTACHMENT_DESCRIPTION_MAY_ALIAS_BIT bit in their attachment
description flags.
Attachments aliasing the same memory occurs in multiple ways:

  * Multiple attachments being assigned the same image view as part of
    framebuffer creation.
  * Attachments using distinct image views that correspond to the same image
    subresource of an image.
  * Attachments using views of distinct image subresources which are bound
    to overlapping memory ranges.

[NOTE]
.Note
====
Render passes must: include subpass dependencies (either directly or via a
subpass dependency chain) between any two subpasses that operate on the same
attachment or aliasing attachments and those subpass dependencies must:
include execution and memory dependencies separating uses of the aliases, if
at least one of those subpasses writes to one of the aliases.
These dependencies must: not include the ename:VK_DEPENDENCY_BY_REGION_BIT
if the aliases are views of distinct image subresources which overlap in
memory.
====

Multiple attachments that alias the same memory must: not be used in a
single subpass.
A given attachment index must: not be used multiple times in a single
subpass, with one exception: two subpass attachments can: use the same
attachment index if at least one use is as an input attachment and neither
use is as a resolve or preserve attachment.
In other words, the same view can: be used simultaneously as an input and
color or depth/stencil attachment, but must: not be used as multiple color
or depth/stencil attachments nor as resolve or preserve attachments.
The precise set of valid scenarios is described in more detail
<<renderpass-feedbackloop, below>>.

If a set of attachments alias each other, then all except the first to be
used in the render pass must: use an pname:initialLayout of
ename:VK_IMAGE_LAYOUT_UNDEFINED, since the earlier uses of the other aliases
make their contents undefined.
Once an alias has been used and a different alias has been used after it,
the first alias must: not be used in any later subpasses.
However, an application can: assign the same image view to multiple aliasing
attachment indices, which allows that image view to be used multiple times
even if other aliases are used in between.

[NOTE]
.Note
====
Once an attachment needs the ename:VK_ATTACHMENT_DESCRIPTION_MAY_ALIAS_BIT
bit, there should: be no additional cost of introducing additional aliases,
and using these additional aliases may: allow more efficient clearing of the
attachments on multiple uses via ename:VK_ATTACHMENT_LOAD_OP_CLEAR.
====

[open,refpage='VkSubpassDescription',desc='Structure specifying a subpass description',type='structs']
--

The sname:VkSubpassDescription structure is defined as:

include::../api/structs/VkSubpassDescription.txt[]

  * pname:flags is a bitmask of elink:VkSubpassDescriptionFlagBits
    specifying usage of the subpass.
  * pname:pipelineBindPoint is a elink:VkPipelineBindPoint value specifying
    whether this is a compute or graphics subpass.
    Currently, only graphics subpasses are supported.
  * pname:inputAttachmentCount is the number of input attachments.
  * pname:pInputAttachments is an array of slink:VkAttachmentReference
    structures (defined below) that lists which of the render pass's
    attachments can: be read in the fragment shader stage during the
    subpass, and what layout each attachment will be in during the subpass.
    Each element of the array corresponds to an input attachment unit number
    in the shader, i.e. if the shader declares an input variable
    `layout(input_attachment_index=X, set=Y, binding=Z)` then it uses the
    attachment provided in pname:pInputAttachments[X].
    Input attachments must: also be bound to the pipeline with a descriptor
    set, with the input attachment descriptor written in the location
    (set=Y, binding=Z).
    Fragment shaders can: use subpass input variables to access the contents
    of an input attachment at the fragment's (x, y, layer) framebuffer
    coordinates.
  * pname:colorAttachmentCount is the number of color attachments.
  * pname:pColorAttachments is an array of pname:colorAttachmentCount
    slink:VkAttachmentReference structures that lists which of the render
    pass's attachments will be used as color attachments in the subpass, and
    what layout each attachment will be in during the subpass.
    Each element of the array corresponds to a fragment shader output
    location, i.e. if the shader declared an output variable
    `layout(location=X)` then it uses the attachment provided in
    pname:pColorAttachments[X].
  * pname:pResolveAttachments is `NULL` or an array of
    pname:colorAttachmentCount slink:VkAttachmentReference structures that
    lists which of the render pass's attachments are resolved to at the end
    of the subpass, and what layout each attachment will be in during the
    multisample resolve operation.
    If pname:pResolveAttachments is not `NULL`, each of its elements
    corresponds to a color attachment (the element in
    pname:pColorAttachments at the same index), and a multisample resolve
    operation is defined for each attachment.
    At the end of each subpass, multisample resolve operations read the
    subpass's color attachments, and resolve the samples for each pixel to
    the same pixel location in the corresponding resolve attachments, unless
    the resolve attachment index is ename:VK_ATTACHMENT_UNUSED.
    If the first use of an attachment in a render pass is as a resolve
    attachment, then the pname:loadOp is effectively ignored as the resolve
    is guaranteed to overwrite all pixels in the render area.
  * pname:pDepthStencilAttachment is a pointer to a
    slink:VkAttachmentReference specifying which attachment will be used for
    depth/stencil data and the layout it will be in during the subpass.
    Setting the attachment index to ename:VK_ATTACHMENT_UNUSED or leaving
    this pointer as `NULL` indicates that no depth/stencil attachment will
    be used in the subpass.
  * pname:preserveAttachmentCount is the number of preserved attachments.
  * pname:pPreserveAttachments is an array of pname:preserveAttachmentCount
    render pass attachment indices describing the attachments that are not
    used by a subpass, but whose contents must: be preserved throughout the
    subpass.

The contents of an attachment within the render area become undefined at the
start of a subpass *S* if all of the following conditions are true:

  * The attachment is used as a color, depth/stencil, or resolve attachment
    in any subpass in the render pass.
  * There is a subpass *S~1~* that uses or preserves the attachment, and a
    subpass dependency from *S~1~* to *S*.
  * The attachment is not used or preserved in subpass *S*.

Once the contents of an attachment become undefined in subpass *S*, they
remain undefined for subpasses in subpass dependency chains starting with
subpass *S* until they are written again.
However, they remain valid for subpasses in other subpass dependency chains
starting with subpass *S~1~* if those subpasses use or preserve the
attachment.

.Valid Usage
****
  * [[VUID-VkSubpassDescription-pipelineBindPoint-00844]]
    pname:pipelineBindPoint must: be ename:VK_PIPELINE_BIND_POINT_GRAPHICS
  * [[VUID-VkSubpassDescription-colorAttachmentCount-00845]]
    pname:colorAttachmentCount must: be less than or equal to
    sname:VkPhysicalDeviceLimits::pname:maxColorAttachments
  * [[VUID-VkSubpassDescription-loadOp-00846]]
    If the first use of an attachment in this render pass is as an input
    attachment, and the attachment is not also used as a color or
    depth/stencil attachment in the same subpass, then pname:loadOp must:
    not be ename:VK_ATTACHMENT_LOAD_OP_CLEAR
  * [[VUID-VkSubpassDescription-pResolveAttachments-00847]]
    If pname:pResolveAttachments is not `NULL`, for each resolve attachment
    that does not have the value ename:VK_ATTACHMENT_UNUSED, the
    corresponding color attachment must: not have the value
    ename:VK_ATTACHMENT_UNUSED
  * [[VUID-VkSubpassDescription-pResolveAttachments-00848]]
    If pname:pResolveAttachments is not `NULL`, the sample count of each
    element of pname:pColorAttachments must: be anything other than
    ename:VK_SAMPLE_COUNT_1_BIT
  * [[VUID-VkSubpassDescription-pResolveAttachments-00849]]
    Each element of pname:pResolveAttachments must: have a sample count of
    ename:VK_SAMPLE_COUNT_1_BIT
  * [[VUID-VkSubpassDescription-pResolveAttachments-00850]]
    Each element of pname:pResolveAttachments must: have the same
    elink:VkFormat as its corresponding color attachment
  * [[VUID-VkSubpassDescription-pColorAttachments-01417]]
    All attachments in pname:pColorAttachments that are not
    ename:VK_ATTACHMENT_UNUSED must: have the same sample count
ifdef::VK_AMD_mixed_attachment_samples[]
  * [[VUID-VkSubpassDescription-pColorAttachments-01506]]
    All attachments in pname:pColorAttachments that are not
    ename:VK_ATTACHMENT_UNUSED must: have a sample count that is smaller
    than or equal to the sample count of pname:pDepthStencilAttachment if it
    is not ename:VK_ATTACHMENT_UNUSED
endif::VK_AMD_mixed_attachment_samples[]
ifndef::VK_AMD_mixed_attachment_samples[]
ifndef::VK_NV_framebuffer_mixed_samples[]
  * [[VUID-VkSubpassDescription-pDepthStencilAttachment-01418]]
    If pname:pDepthStencilAttachment is not ename:VK_ATTACHMENT_UNUSED and
    any attachments in pname:pColorAttachments are not
    ename:VK_ATTACHMENT_UNUSED, they must: have the same sample count
endif::VK_NV_framebuffer_mixed_samples[]
endif::VK_AMD_mixed_attachment_samples[]
  * [[VUID-VkSubpassDescription-None-00852]]
    If any input attachments are ename:VK_ATTACHMENT_UNUSED, then any
    pipelines bound during the subpass must: not access those input
    attachments from the fragment shader
  * [[VUID-VkSubpassDescription-attachment-00853]]
    The pname:attachment member of each element of
    pname:pPreserveAttachments must: not be ename:VK_ATTACHMENT_UNUSED
  * [[VUID-VkSubpassDescription-pPreserveAttachments-00854]]
    Each element of pname:pPreserveAttachments must: not also be an element
    of any other member of the subpass description
  * [[VUID-VkSubpassDescription-layout-00855]]
    If any attachment is used as both an input attachment and a color or
    depth/stencil attachment, then each use must: use the same pname:layout
ifdef::VK_NVX_multiview_per_view_attributes[]
  * [[VUID-VkSubpassDescription-flags-00856]]
    If pname:flags includes
    ename:VK_SUBPASS_DESCRIPTION_PER_VIEW_POSITION_X_ONLY_BIT_NVX, it must:
    also include ename:VK_SUBPASS_DESCRIPTION_PER_VIEW_ATTRIBUTES_BIT_NVX.
endif::VK_NVX_multiview_per_view_attributes[]
****

include::../validity/structs/VkSubpassDescription.txt[]
--

[open,refpage='VkSubpassDescriptionFlagBits',desc='Bitmask specifying usage of a subpass',type='enums']
--

Bits which can: be set in slink:VkSubpassDescription::pname:flags,
specifying usage of the subpass, are:

include::../api/enums/VkSubpassDescriptionFlagBits.txt[]

ifdef::VK_NVX_multiview_per_view_attributes[]
  * ename:VK_SUBPASS_DESCRIPTION_PER_VIEW_ATTRIBUTES_BIT_NVX specifies that
    shaders compiled for this subpass write the attributes for all views in
    a single invocation of each vertex processing stage.
    All pipelines compiled against a subpass that includes this bit must:
    write per-view attributes to the code:*PerViewNV[] shader outputs, in
    addition to the non-per-view (e.g. code:Position) outputs.
  * ename:VK_SUBPASS_DESCRIPTION_PER_VIEW_POSITION_X_ONLY_BIT_NVX specifies
    that shaders compiled for this subpass use per-view positions which only
    differ in value in the x component.
    Per-view viewport mask can: also be used.
endif::VK_NVX_multiview_per_view_attributes[]

ifndef::VK_NVX_multiview_per_view_attributes[]
[NOTE]
.Note
====
All bits for this type are defined by extensions, and none of those
extensions are enabled in this build of the specification.
====
endif::VK_NVX_multiview_per_view_attributes[]
--

[open,refpage='VkSubpassDescriptionFlags',desc='Bitmask of VkSubpassDescriptionFlagBits',type='enums']
--
include::../api/flags/VkSubpassDescriptionFlags.txt[]

sname:VkSubpassDescriptionFlags is a bitmask type for setting a mask of zero
or more slink:VkSubpassDescriptionFlagBits.
--

[open,refpage='VkAttachmentReference',desc='Structure specifying an attachment reference',type='structs']
--

The sname:VkAttachmentReference structure is defined as:

include::../api/structs/VkAttachmentReference.txt[]

  * pname:attachment is the index of the attachment of the render pass, and
    corresponds to the index of the corresponding element in the
    pname:pAttachments array of the sname:VkRenderPassCreateInfo structure.
    If any color or depth/stencil attachments are
    ename:VK_ATTACHMENT_UNUSED, then no writes occur for those attachments.
  * pname:layout is a elink:VkImageLayout value specifying the layout the
    attachment uses during the subpass.

.Valid Usage
****
  * [[VUID-VkAttachmentReference-layout-00857]]
    pname:layout must: not be ename:VK_IMAGE_LAYOUT_UNDEFINED or
    ename:VK_IMAGE_LAYOUT_PREINITIALIZED
****

include::../validity/structs/VkAttachmentReference.txt[]
--

[open,refpage='VkSubpassDependency',desc='Structure specifying a subpass dependency',type='structs']
--

The sname:VkSubpassDependency structure is defined as:

include::../api/structs/VkSubpassDependency.txt[]

  * pname:srcSubpass is the subpass index of the first subpass in the
    dependency, or ename:VK_SUBPASS_EXTERNAL.
  * pname:dstSubpass is the subpass index of the second subpass in the
    dependency, or ename:VK_SUBPASS_EXTERNAL.
  * pname:srcStageMask is a bitmask of elink:VkPipelineStageFlagBits
    specifying the <<synchronization-pipeline-stages-masks, source stage
    mask>>.
  * pname:dstStageMask is a bitmask of elink:VkPipelineStageFlagBits
    specifying the <<synchronization-pipeline-stages-masks, destination
    stage mask>>
  * pname:srcAccessMask is a bitmask of elink:VkAccessFlagBits specifying a
    <<synchronization-access-masks, source access mask>>.
  * pname:dstAccessMask is a bitmask of elink:VkAccessFlagBits specifying a
    <<synchronization-access-masks, destination access mask>>.
  * pname:dependencyFlags is a bitmask of elink:VkDependencyFlagBits.

If pname:srcSubpass is equal to pname:dstSubpass then the
slink:VkSubpassDependency describes a
<<synchronization-pipeline-barriers-subpass-self-dependencies, subpass
self-dependency>>, and only constrains the pipeline barriers allowed within
a subpass instance.
Otherwise, when a render pass instance which includes a subpass dependency
is submitted to a queue, it defines a memory dependency between the
subpasses identified by pname:srcSubpass and pname:dstSubpass.

If pname:srcSubpass is equal to ename:VK_SUBPASS_EXTERNAL, the first
<<synchronization-dependencies-scopes, synchronization scope>> includes
commands that occur earlier in <<synchronization-submission-order,submission
order>> than the flink:vkCmdBeginRenderPass used to begin the render pass
instance.
Otherwise, the first set of commands includes all commands submitted as part
of the subpass instance identified by pname:srcSubpass and any load, store
or multisample resolve operations on attachments used in pname:srcSubpass.
In either case, the first synchronization scope is limited to operations on
the pipeline stages determined by the
<<synchronization-pipeline-stages-masks, source stage mask>> specified by
pname:srcStageMask.

If pname:dstSubpass is equal to ename:VK_SUBPASS_EXTERNAL, the second
<<synchronization-dependencies-scopes, synchronization scope>> includes
commands that occur later in <<synchronization-submission-order,submission
order>> than the flink:vkCmdEndRenderPass used to end the render pass
instance.
Otherwise, the second set of commands includes all commands submitted as
part of the subpass instance identified by pname:dstSubpass and any load,
store or multisample resolve operations on attachments used in
pname:dstSubpass.
In either case, the second synchronization scope is limited to operations on
the pipeline stages determined by the
<<synchronization-pipeline-stages-masks, destination stage mask>> specified
by pname:dstStageMask.

The first <<synchronization-dependencies-access-scopes, access scope>> is
limited to access in the pipeline stages determined by the
<<synchronization-pipeline-stages-masks, source stage mask>> specified by
pname:srcStageMask.
It is also limited to access types in the <<synchronization-access-masks,
source access mask>> specified by pname:srcAccessMask.

The second <<synchronization-dependencies-access-scopes, access scope>> is
limited to access in the pipeline stages determined by the
<<synchronization-pipeline-stages-masks, destination stage mask>> specified
by pname:dstStageMask.
It is also limited to access types in the <<synchronization-access-masks,
destination access mask>> specified by pname:dstAccessMask.

The <<synchronization-dependencies-available-and-visible, availability and
visibility operations>> defined by a subpass dependency affect the execution
of <<renderpass-layout-transitions, image layout transitions>> within the
render pass.

[NOTE]
.Note
====
For non-attachment resources, the memory dependency expressed by subpass
dependency is nearly identical to that of a slink:VkMemoryBarrier (with
matching pname:srcAccessMask/pname:dstAccessMask parameters) submitted as a
part of a flink:vkCmdPipelineBarrier (with matching
pname:srcStageMask/pname:dstStageMask parameters).
The only difference being that its scopes are limited to the identified
subpasses rather than potentially affecting everything before and after.

For attachments however, subpass dependencies work more like an
slink:VkImageMemoryBarrier defined similarly to the slink:VkMemoryBarrier
above, the queue family indices set to ename:VK_QUEUE_FAMILY_IGNORED, and
layouts as follows:

  * The equivalent to pname:oldLayout is the attachment's layout according
    to the subpass description for pname:srcSubpass.
  * The equivalent to pname:newLayout is the attachment's layout according
    to the subpass description for pname:dstSubpass.
====

.Valid Usage
****
  * [[VUID-VkSubpassDependency-srcSubpass-00858]]
    If pname:srcSubpass is not ename:VK_SUBPASS_EXTERNAL, pname:srcStageMask
    must: not include ename:VK_PIPELINE_STAGE_HOST_BIT
  * [[VUID-VkSubpassDependency-dstSubpass-00859]]
    If pname:dstSubpass is not ename:VK_SUBPASS_EXTERNAL, pname:dstStageMask
    must: not include ename:VK_PIPELINE_STAGE_HOST_BIT
  * [[VUID-VkSubpassDependency-srcStageMask-00860]]
    If the <<features-features-geometryShader,geometry shaders>> feature is
    not enabled, pname:srcStageMask must: not contain
    ename:VK_PIPELINE_STAGE_GEOMETRY_SHADER_BIT
  * [[VUID-VkSubpassDependency-dstStageMask-00861]]
    If the <<features-features-geometryShader,geometry shaders>> feature is
    not enabled, pname:dstStageMask must: not contain
    ename:VK_PIPELINE_STAGE_GEOMETRY_SHADER_BIT
  * [[VUID-VkSubpassDependency-srcStageMask-00862]]
    If the <<features-features-tessellationShader,tessellation shaders>>
    feature is not enabled, pname:srcStageMask must: not contain
    ename:VK_PIPELINE_STAGE_TESSELLATION_CONTROL_SHADER_BIT or
    ename:VK_PIPELINE_STAGE_TESSELLATION_EVALUATION_SHADER_BIT
  * [[VUID-VkSubpassDependency-dstStageMask-00863]]
    If the <<features-features-tessellationShader,tessellation shaders>>
    feature is not enabled, pname:dstStageMask must: not contain
    ename:VK_PIPELINE_STAGE_TESSELLATION_CONTROL_SHADER_BIT or
    ename:VK_PIPELINE_STAGE_TESSELLATION_EVALUATION_SHADER_BIT
  * [[VUID-VkSubpassDependency-srcSubpass-00864]]
    pname:srcSubpass must: be less than or equal to pname:dstSubpass, unless
    one of them is ename:VK_SUBPASS_EXTERNAL, to avoid cyclic dependencies
    and ensure a valid execution order
  * [[VUID-VkSubpassDependency-srcSubpass-00865]]
    pname:srcSubpass and pname:dstSubpass must: not both be equal to
    ename:VK_SUBPASS_EXTERNAL
  * [[VUID-VkSubpassDependency-srcSubpass-00866]]
    If pname:srcSubpass is equal to pname:dstSubpass, pname:srcStageMask and
    pname:dstStageMask must: only contain one of
    ename:VK_PIPELINE_STAGE_TOP_OF_PIPE_BIT,
    ename:VK_PIPELINE_STAGE_DRAW_INDIRECT_BIT,
    ename:VK_PIPELINE_STAGE_VERTEX_INPUT_BIT,
    ename:VK_PIPELINE_STAGE_VERTEX_SHADER_BIT,
    ename:VK_PIPELINE_STAGE_TESSELLATION_CONTROL_SHADER_BIT,
    ename:VK_PIPELINE_STAGE_TESSELLATION_EVALUATION_SHADER_BIT,
    ename:VK_PIPELINE_STAGE_GEOMETRY_SHADER_BIT,
    ename:VK_PIPELINE_STAGE_FRAGMENT_SHADER_BIT,
    ename:VK_PIPELINE_STAGE_EARLY_FRAGMENT_TESTS_BIT,
    ename:VK_PIPELINE_STAGE_LATE_FRAGMENT_TESTS_BIT,
    ename:VK_PIPELINE_STAGE_COLOR_ATTACHMENT_OUTPUT_BIT,
    ename:VK_PIPELINE_STAGE_BOTTOM_OF_PIPE_BIT, or
    ename:VK_PIPELINE_STAGE_ALL_GRAPHICS_BIT
  * [[VUID-VkSubpassDependency-srcSubpass-00867]]
    If pname:srcSubpass is equal to pname:dstSubpass and not all of the
    stages in pname:srcStageMask and pname:dstStageMask are
    <<synchronization-framebuffer-regions,framebuffer-space stages>>, the
    <<synchronization-pipeline-stages-order, logically latest>> pipeline
    stage in pname:srcStageMask must: be
    <<synchronization-pipeline-stages-order, logically earlier>> than or
    equal to the <<synchronization-pipeline-stages-order, logically
    earliest>> pipeline stage in pname:dstStageMask
  * [[VUID-VkSubpassDependency-srcAccessMask-00868]]
    Any access flag included in pname:srcAccessMask must: be supported by
    one of the pipeline stages in pname:srcStageMask, as specified in the
    <<synchronization-access-types-supported, table of supported access
    types>>.
  * [[VUID-VkSubpassDependency-dstAccessMask-00869]]
    Any access flag included in pname:dstAccessMask must: be supported by
    one of the pipeline stages in pname:dstStageMask, as specified in the
    <<synchronization-access-types-supported, table of supported access
    types>>.
ifdef::VK_VERSION_1_1,VK_KHR_multiview[]
  * [[VUID-VkSubpassDependency-dependencyFlags-00870]]
    If pname:dependencyFlags includes ename:VK_DEPENDENCY_VIEW_LOCAL_BIT,
    then both pname:srcSubpass and pname:dstSubpass must: not equal
    ename:VK_SUBPASS_EXTERNAL
  * [[VUID-VkSubpassDependency-dependencyFlags-00871]]
    If pname:dependencyFlags includes ename:VK_DEPENDENCY_VIEW_LOCAL_BIT,
    then the render pass must: have multiview enabled
  * [[VUID-VkSubpassDependency-srcSubpass-00872]]
    If pname:srcSubpass equals pname:dstSubpass and that subpass has more
    than one bit set in the view mask, then pname:dependencyFlags must:
    include ename:VK_DEPENDENCY_VIEW_LOCAL_BIT
endif::VK_VERSION_1_1,VK_KHR_multiview[]
****

include::../validity/structs/VkSubpassDependency.txt[]
--

ifdef::VK_VERSION_1_1,VK_KHR_multiview[]

When multiview is enabled, the execution of the multiple views of one
subpass may: not occur simultaneously or even back-to-back, and rather may:
be interleaved with the execution of other subpasses.
The load and store operations apply to attachments on a per-view basis.
For example, an attachment using ename:VK_ATTACHMENT_LOAD_OP_CLEAR will have
each view cleared on first use, but the first use of one view may be
temporally distant from the first use of another view.

[NOTE]
.Note
====
A good mental model for multiview is to think of a multiview subpass as if
it were a collection of individual (per-view) subpasses that are logically
grouped together and described as a single multiview subpass in the API.
Similarly, a multiview attachment can be thought of like several individual
attachments that happen to be layers in a single image.
A view-local dependency between two multiview subpasses acts like a set of
one-to-one dependencies between corresponding pairs of per-view subpasses.
A view-global dependency between two multiview subpasses acts like a set of
[eq]#N {times} M# dependencies between all pairs of per-view subpasses in
the source and destination.
Thus, it is a more compact representation which also makes clear the
commonality and reuse that is present between views in a subpass.
This interpretation motivates the answers to questions like "`when does the
load op apply`" - it is on the first use of each view of an attachment, as
if each view were a separate attachment.
====

endif::VK_VERSION_1_1,VK_KHR_multiview[]

ifdef::editing-notes[]
[NOTE]
.editing-note
====
The following two alleged implicit dependencies are practically no-ops, as
the operations they describe are already guaranteed by semaphores and
submission order (so they're almost entirely no-ops on their own).
The *only* reason they exist is because it simplifies reasoning about where
<<renderpass-layout-transitions, automatic layout transitions>> happen.
Further rewrites of this chapter could potentially remove the need for
these.
====
endif::editing-notes[]

If there is no subpass dependency from ename:VK_SUBPASS_EXTERNAL to the
first subpass that uses an attachment, then an implicit subpass dependency
exists from ename:VK_SUBPASS_EXTERNAL to the first subpass it is used in.
The subpass dependency operates as if defined with the following parameters:

[source,c]
---------------------------------------------------
VkSubpassDependency implicitDependency = {
    .srcSubpass = VK_SUBPASS_EXTERNAL;
    .dstSubpass = firstSubpass; // First subpass attachment is used in
    .srcStageMask = VK_PIPELINE_STAGE_TOP_OF_PIPE_BIT;
    .dstStageMask = VK_PIPELINE_STAGE_ALL_COMMANDS_BIT;
    .srcAccessMask = 0;
    .dstAccessMask = VK_ACCESS_INPUT_ATTACHMENT_READ_BIT |
                     VK_ACCESS_COLOR_ATTACHMENT_READ_BIT |
                     VK_ACCESS_COLOR_ATTACHMENT_WRITE_BIT |
                     VK_ACCESS_DEPTH_STENCIL_ATTACHMENT_READ_BIT |
                     VK_ACCESS_DEPTH_STENCIL_ATTACHMENT_WRITE_BIT;
    .dependencyFlags = 0;
};
---------------------------------------------------

Similarly, if there is no subpass dependency from the last subpass that uses
an attachment to ename:VK_SUBPASS_EXTERNAL, then an implicit subpass
dependency exists from the last subpass it is used in to
ename:VK_SUBPASS_EXTERNAL.
The subpass dependency operates as if defined with the following parameters:

[source,c]
---------------------------------------------------
VkSubpassDependency implicitDependency = {
    .srcSubpass = lastSubpass; // Last subpass attachment is used in
    .dstSubpass = VK_SUBPASS_EXTERNAL;
    .srcStageMask = VK_PIPELINE_STAGE_ALL_COMMANDS_BIT;
    .dstStageMask = VK_PIPELINE_STAGE_BOTTOM_OF_PIPE_BIT;
    .srcAccessMask = VK_ACCESS_INPUT_ATTACHMENT_READ_BIT |
                     VK_ACCESS_COLOR_ATTACHMENT_READ_BIT |
                     VK_ACCESS_COLOR_ATTACHMENT_WRITE_BIT |
                     VK_ACCESS_DEPTH_STENCIL_ATTACHMENT_READ_BIT |
                     VK_ACCESS_DEPTH_STENCIL_ATTACHMENT_WRITE_BIT;
    .dstAccessMask = 0;
    .dependencyFlags = 0;
};
---------------------------------------------------

[[renderpass-layout-transitions]]
As subpasses may: overlap or execute out of order with regards to other
subpasses unless a subpass dependency chain describes otherwise, the layout
transitions required between subpasses cannot: be known to an application.
Instead, an application provides the layout that each attachment must: be in
at the start and end of a render pass, and the layout it must: be in during
each subpass it is used in.
The implementation then must: execute layout transitions between subpasses
in order to guarantee that the images are in the layouts required by each
subpass, and in the final layout at the end of the render pass.

Automatic layout transitions apply to the entire image subresource attached
to the framebuffer.
ifdef::VK_VERSION_1_1,VK_KHR_maintenance1[]
If the attachment view is a 2D or 2D array view of a 3D image, even if the
attachment view only refers to a subset of the slices of the selected mip
level of the 3D image, automatic layout transitions apply to the entire
subresource referenced which is the entire mip level in this case.
endif::VK_VERSION_1_1,VK_KHR_maintenance1[]

Automatic layout transitions away from the layout used in a subpass
happen-after the availability operations for all dependencies with that
subpass as the pname:srcSubpass.

Automatic layout transitions into the layout used in a subpass happen-before
the visibility operations for all dependencies with that subpass as the
pname:dstSubpass.

Automatic layout transitions away from pname:initialLayout happens-after the
availability operations for all dependencies with a pname:srcSubpass equal
to ename:VK_SUBPASS_EXTERNAL, where pname:dstSubpass uses the attachment
that will be transitioned.
For attachments created with ename:VK_ATTACHMENT_DESCRIPTION_MAY_ALIAS_BIT,
automatic layout transitions away from pname:initialLayout happen-after the
availability operations for all dependencies with a pname:srcSubpass equal
to ename:VK_SUBPASS_EXTERNAL, where pname:dstSubpass uses any aliased
attachment.

Automatic layout transitions into pname:finalLayout happens-before the
visibility operations for all dependencies with a pname:dstSubpass equal to
ename:VK_SUBPASS_EXTERNAL, where pname:srcSubpass uses the attachment that
will be transitioned.
For attachments created with ename:VK_ATTACHMENT_DESCRIPTION_MAY_ALIAS_BIT,
automatic layout transitions into pname:finalLayout happen-before the
visibility operations for all dependencies with a pname:dstSubpass equal to
ename:VK_SUBPASS_EXTERNAL, where pname:srcSubpass uses any aliased
attachment.

ifdef::VK_EXT_sample_locations[]

The image layout of the depth aspect of a depth/stencil attachment referring
to an image created with
ename:VK_IMAGE_CREATE_SAMPLE_LOCATIONS_COMPATIBLE_DEPTH_BIT_EXT is dependent
on the last sample locations used to render to the attachment, thus
automatic layout transitions use the sample locations state specified in
slink:VkRenderPassSampleLocationsBeginInfoEXT.

Automatic layout transitions of an attachment referring to a depth/stencil
image created with
ename:VK_IMAGE_CREATE_SAMPLE_LOCATIONS_COMPATIBLE_DEPTH_BIT_EXT use the
sample locations the image subresource range referenced by the attachment
was last rendered with.
If the current render pass does not use the attachment as a depth/stencil
attachment in any subpass that happens-before, the automatic layout
transition uses the sample locations state specified in the
pname:sampleLocationsInfo member of the element of the
sname:VkRenderPassSampleLocationsBeginInfoEXT::pname:pAttachmentInitialSampleLocations
array for which the pname:attachmentIndex member equals the attachment index
of the attachment, if one is specified.
Otherwise, the automatic layout transition uses the sample locations state
specified in the pname:sampleLocationsInfo member of the element of the
sname:VkRenderPassSampleLocationsBeginInfoEXT::pname:pPostSubpassSampleLocations
array for which the pname:subpassIndex member equals the index of the
subpass that last used the attachment as a depth/stencil attachment, if one
is specified.

If no sample locations state has been specified for an automatic layout
transition performed on an attachment referring to a depth/stencil image
created with ename:VK_IMAGE_CREATE_SAMPLE_LOCATIONS_COMPATIBLE_DEPTH_BIT_EXT
the contents of the depth aspect of the depth/stencil attachment become
undefined as if the layout of the attachment was transitioned from the
ename:VK_IMAGE_LAYOUT_UNDEFINED layout.

endif::VK_EXT_sample_locations[]

If two subpasses use the same attachment in different layouts, and both
layouts are read-only, no subpass dependency needs to be specified between
those subpasses.
If an implementation treats those layouts separately, it must: insert an
implicit subpass dependency between those subpasses to separate the uses in
each layout.
The subpass dependency operates as if defined with the following parameters:

[source,c]
---------------------------------------------------
// Used for input attachments
VkPipelineStageFlags inputAttachmentStages = VK_PIPELINE_STAGE_FRAGMENT_SHADER_BIT;
VkAccessFlags inputAttachmentAccess = VK_ACCESS_INPUT_ATTACHMENT_READ_BIT;

// Used for depth/stencil attachments
VkPipelineStageFlags depthStencilAttachmentStages = VK_PIPELINE_STAGE_EARLY_FRAGMENT_TESTS_BIT | VK_PIPELINE_STAGE_LATE_FRAGMENT_TESTS_BIT;
VkAccessFlags depthStencilAttachmentAccess = VK_ACCESS_DEPTH_STENCIL_ATTACHMENT_READ_BIT;

VkSubpassDependency implicitDependency = {
    .srcSubpass = firstSubpass;
    .dstSubpass = secondSubpass;
    .srcStageMask = inputAttachmentStages | depthStencilAttachmentStages;
    .dstStageMask = inputAttachmentStages | depthStencilAttachmentStages;
    .srcAccessMask = inputAttachmentAccess | depthStencilAttachmentAccess;
    .dstAccessMask = inputAttachmentAccess | depthStencilAttachmentAccess;
    .dependencyFlags = 0;
};
---------------------------------------------------

[[renderpass-feedbackloop]]
If a subpass uses the same attachment as both an input attachment and either
a color attachment or a depth/stencil attachment, writes via the color or
depth/stencil attachment are not automatically made visible to reads via the
input attachment, causing a _feedback loop_, except in any of the following
conditions:

  * If the color components or depth/stencil components read by the input
    attachment are mutually exclusive with the components written by the
    color or depth/stencil attachments, then there is no feedback loop.
    This requires the graphics pipelines used by the subpass to disable
    writes to color components that are read as inputs via the
    pname:colorWriteMask, and to disable writes to depth/stencil components
    that are read as inputs via pname:depthWriteEnable or
    pname:stencilTestEnable.
  * If the attachment is used as an input attachment and depth/stencil
    attachment only, and the depth/stencil attachment is not written to.
  * If a memory dependency is inserted between when the attachment is
    written and when it is subsequently read by later fragments.
    <<synchronization-pipeline-barriers, Pipeline barriers>> expressing a
    <<synchronization-pipeline-barriers-subpass-self-dependencies, subpass
    self-dependency>> are the only way to achieve this, and one must: be
    inserted every time a fragment will read values at a particular sample
    (x, y, layer, sample) coordinate, if those values have been written
    since the most recent pipeline barrier; or the since start of the
    subpass if there have been no pipeline barriers since the start of the
    subpass.

An attachment used as both an input attachment and a color attachment must:
be in the
ifdef::VK_KHR_shared_presentable_image[]
ename:VK_IMAGE_LAYOUT_SHARED_PRESENT_KHR or
endif::VK_KHR_shared_presentable_image[]
ename:VK_IMAGE_LAYOUT_GENERAL layout.
An attachment used as an input attachment and depth/stencil attachment must:
be in the
ifdef::VK_KHR_shared_presentable_image[]
ename:VK_IMAGE_LAYOUT_SHARED_PRESENT_KHR,
endif::VK_KHR_shared_presentable_image[]
ifdef::VK_VERSION_1_1,VK_KHR_maintenance2[]
ename:VK_IMAGE_LAYOUT_DEPTH_READ_ONLY_STENCIL_ATTACHMENT_OPTIMAL,
ename:VK_IMAGE_LAYOUT_DEPTH_ATTACHMENT_STENCIL_READ_ONLY_OPTIMAL,
endif::VK_VERSION_1_1,VK_KHR_maintenance2[]
ename:VK_IMAGE_LAYOUT_DEPTH_STENCIL_READ_ONLY_OPTIMAL, or
ename:VK_IMAGE_LAYOUT_GENERAL layout.
An attachment must: not be used as both a depth/stencil attachment and a
color attachment.

[open,refpage='vkDestroyRenderPass',desc='Destroy a render pass object',type='protos']
--

To destroy a render pass, call:

include::../api/protos/vkDestroyRenderPass.txt[]

  * pname:device is the logical device that destroys the render pass.
  * pname:renderPass is the handle of the render pass to destroy.
  * pname:pAllocator controls host memory allocation as described in the
    <<memory-allocation, Memory Allocation>> chapter.

.Valid Usage
****
  * [[VUID-vkDestroyRenderPass-renderPass-00873]]
    All submitted commands that refer to pname:renderPass must: have
    completed execution
  * [[VUID-vkDestroyRenderPass-renderPass-00874]]
    If sname:VkAllocationCallbacks were provided when pname:renderPass was
    created, a compatible set of callbacks must: be provided here
  * [[VUID-vkDestroyRenderPass-renderPass-00875]]
    If no sname:VkAllocationCallbacks were provided when pname:renderPass
    was created, pname:pAllocator must: be `NULL`
****

include::../validity/protos/vkDestroyRenderPass.txt[]
--


[[renderpass-compatibility]]
== Render Pass Compatibility

Framebuffers and graphics pipelines are created based on a specific render
pass object.
They must: only be used with that render pass object, or one compatible with
it.

Two attachment references are compatible if they have matching format and
sample count, or are both ename:VK_ATTACHMENT_UNUSED or the pointer that
would contain the reference is `NULL`.

Two arrays of attachment references are compatible if all corresponding
pairs of attachments are compatible.
If the arrays are of different lengths, attachment references not present in
the smaller array are treated as ename:VK_ATTACHMENT_UNUSED.

Two render passes are compatible if their corresponding color, input,
resolve, and depth/stencil attachment references are compatible and if they
are otherwise identical except for:

  * Initial and final image layout in attachment descriptions
  * Load and store operations in attachment descriptions
  * Image layout in attachment references

A framebuffer is compatible with a render pass if it was created using the
same render pass or a compatible render pass.


== Framebuffers

[open,refpage='VkFramebuffer',desc='Opaque handle to a framebuffer object',type='handles']
--

Render passes operate in conjunction with _framebuffers_.
Framebuffers represent a collection of specific memory attachments that a
render pass instance uses.

Framebuffers are represented by sname:VkFramebuffer handles:

include::../api/handles/VkFramebuffer.txt[]

--

[open,refpage='vkCreateFramebuffer',desc='Create a new framebuffer object',type='protos']
--

To create a framebuffer, call:

include::../api/protos/vkCreateFramebuffer.txt[]

  * pname:device is the logical device that creates the framebuffer.
  * pname:pCreateInfo points to a slink:VkFramebufferCreateInfo structure
    which describes additional information about framebuffer creation.
  * pname:pAllocator controls host memory allocation as described in the
    <<memory-allocation, Memory Allocation>> chapter.
  * pname:pFramebuffer points to a sname:VkFramebuffer handle in which the
    resulting framebuffer object is returned.

include::../validity/protos/vkCreateFramebuffer.txt[]
--

[open,refpage='VkFramebufferCreateInfo',desc='Structure specifying parameters of a newly created framebuffer',type='structs']
--

The sname:VkFramebufferCreateInfo structure is defined as:

include::../api/structs/VkFramebufferCreateInfo.txt[]

  * pname:sType is the type of this structure.
  * pname:pNext is `NULL` or a pointer to an extension-specific structure.
  * pname:flags is reserved for future use.
  * pname:renderPass is a render pass that defines what render passes the
    framebuffer will be compatible with.
    See <<renderpass-compatibility,Render Pass Compatibility>> for details.
  * pname:attachmentCount is the number of attachments.
  * pname:pAttachments is an array of sname:VkImageView handles, each of
    which will be used as the corresponding attachment in a render pass
    instance.
  * pname:width, pname:height and pname:layers define the dimensions of the
    framebuffer.
ifdef::VK_VERSION_1_1,VK_KHR_multiview[]
    If the render pass uses multiview, then pname:layers must: be one and
    each attachment requires a number of layers that is greater than the
    maximum bit index set in the view mask in the subpasses in which it is
    used.
endif::VK_VERSION_1_1,VK_KHR_multiview[]

Applications must: ensure that all accesses to memory that backs image
subresources used as attachments in a given renderpass instance either
happen-before the <<renderpass-load-store-ops, load operations>> for those
attachments, or happen-after the <<renderpass-load-store-ops, store
operations>> for those attachments.

ifdef::VK_VERSION_1_1,VK_KHR_maintenance2[]
For depth/stencil attachments, each aspect can: be used separately as
attachments and non-attachments as long as the non-attachment accesses are
also via an image subresource in either the
ename:VK_IMAGE_LAYOUT_DEPTH_READ_ONLY_STENCIL_ATTACHMENT_OPTIMAL layout or
the ename:VK_IMAGE_LAYOUT_DEPTH_ATTACHMENT_STENCIL_READ_ONLY_OPTIMAL layout,
and the attachment resource uses whichever of those two layouts the image
accesses do not.
Use of non-attachment aspects in this case is only well defined if the
attachment is used in the subpass where the non-attachment access is being
made, or the layout of the image subresource is constant throughout the
entire render pass instance, including the pname:initialLayout and
pname:finalLayout.
endif::VK_VERSION_1_1,VK_KHR_maintenance2[]

[NOTE]
.Note
====
ifndef::VK_VERSION_1_1,VK_KHR_maintenance2[]
This restriction means
endif::VK_VERSION_1_1,VK_KHR_maintenance2[]
ifdef::VK_VERSION_1_1,VK_KHR_maintenance2[]
These restrictions mean
endif::VK_VERSION_1_1,VK_KHR_maintenance2[]
that the render pass has full knowledge of all uses of all of the
attachments, so that the implementation is able to make correct decisions
about when and how to perform layout transitions, when to overlap execution
of subpasses, etc.
====


[[renderpass-noattachments]]
It is legal for a subpass to use no color or depth/stencil attachments, and
rather use shader side effects such as image stores and atomics to produce
an output.
In this case, the subpass continues to use the pname:width, pname:height,
and pname:layers of the framebuffer to define the dimensions of the
rendering area, and the pname:rasterizationSamples from each pipeline's
slink:VkPipelineMultisampleStateCreateInfo to define the number of samples
used in rasterization; however, if
slink:VkPhysicalDeviceFeatures::pname:variableMultisampleRate is
code:VK_FALSE, then all pipelines to be bound with a given zero-attachment
subpass must: have the same value for
slink:VkPipelineMultisampleStateCreateInfo::pname:rasterizationSamples.

.Valid Usage
****
  * [[VUID-VkFramebufferCreateInfo-attachmentCount-00876]]
    pname:attachmentCount must: be equal to the attachment count specified
    in pname:renderPass
  * [[VUID-VkFramebufferCreateInfo-pAttachments-00877]]
    Each element of pname:pAttachments that is used as a color attachment or
    resolve attachment by pname:renderPass must: have been created with a
    pname:usage value including ename:VK_IMAGE_USAGE_COLOR_ATTACHMENT_BIT
  * [[VUID-VkFramebufferCreateInfo-pAttachments-00878]]
    Each element of pname:pAttachments that is used as a depth/stencil
    attachment by pname:renderPass must: have been created with a
    pname:usage value including
    ename:VK_IMAGE_USAGE_DEPTH_STENCIL_ATTACHMENT_BIT
  * [[VUID-VkFramebufferCreateInfo-pAttachments-00879]]
    Each element of pname:pAttachments that is used as an input attachment
    by pname:renderPass must: have been created with a pname:usage value
    including ename:VK_IMAGE_USAGE_INPUT_ATTACHMENT_BIT
  * [[VUID-VkFramebufferCreateInfo-pAttachments-00880]]
    Each element of pname:pAttachments must: have been created with an
    elink:VkFormat value that matches the elink:VkFormat specified by the
    corresponding sname:VkAttachmentDescription in pname:renderPass
  * [[VUID-VkFramebufferCreateInfo-pAttachments-00881]]
    Each element of pname:pAttachments must: have been created with a
    pname:samples value that matches the pname:samples value specified by
    the corresponding sname:VkAttachmentDescription in pname:renderPass
  * [[VUID-VkFramebufferCreateInfo-pAttachments-00882]]
    Each element of pname:pAttachments must: have dimensions at least as
    large as the corresponding framebuffer dimension
  * [[VUID-VkFramebufferCreateInfo-pAttachments-00883]]
    Each element of pname:pAttachments must: only specify a single mip level
  * [[VUID-VkFramebufferCreateInfo-pAttachments-00884]]
    Each element of pname:pAttachments must: have been created with the
    identity swizzle
  * [[VUID-VkFramebufferCreateInfo-width-00885]]
    pname:width must: be greater than `0`.
  * [[VUID-VkFramebufferCreateInfo-width-00886]]
    pname:width must: be less than or equal to
    sname:VkPhysicalDeviceLimits::pname:maxFramebufferWidth
  * [[VUID-VkFramebufferCreateInfo-height-00887]]
    pname:height must: be greater than `0`.
  * [[VUID-VkFramebufferCreateInfo-height-00888]]
    pname:height must: be less than or equal to
    sname:VkPhysicalDeviceLimits::pname:maxFramebufferHeight
  * [[VUID-VkFramebufferCreateInfo-layers-00889]]
    pname:layers must: be greater than `0`.
  * [[VUID-VkFramebufferCreateInfo-layers-00890]]
    pname:layers must: be less than or equal to
    sname:VkPhysicalDeviceLimits::pname:maxFramebufferLayers
ifdef::VK_VERSION_1_1,VK_KHR_maintenance1[]
  * [[VUID-VkFramebufferCreateInfo-pAttachments-00891]]
    Each element of pname:pAttachments that is a 2D or 2D array image view
    taken from a 3D image must: not be a depth/stencil format
endif::VK_VERSION_1_1,VK_KHR_maintenance1[]
****

include::../validity/structs/VkFramebufferCreateInfo.txt[]
--

[open,refpage='VkFramebufferCreateFlags',desc='Reserved for future use',type='enums']
--
include::../api/flags/VkFramebufferCreateFlags.txt[]

sname:VkFramebufferCreateFlags is a bitmask type for setting a mask, but is
currently reserved for future use.
--

[open,refpage='vkDestroyFramebuffer',desc='Destroy a framebuffer object',type='protos']
--

To destroy a framebuffer, call:

include::../api/protos/vkDestroyFramebuffer.txt[]

  * pname:device is the logical device that destroys the framebuffer.
  * pname:framebuffer is the handle of the framebuffer to destroy.
  * pname:pAllocator controls host memory allocation as described in the
    <<memory-allocation, Memory Allocation>> chapter.

.Valid Usage
****
  * [[VUID-vkDestroyFramebuffer-framebuffer-00892]]
    All submitted commands that refer to pname:framebuffer must: have
    completed execution
  * [[VUID-vkDestroyFramebuffer-framebuffer-00893]]
    If sname:VkAllocationCallbacks were provided when pname:framebuffer was
    created, a compatible set of callbacks must: be provided here
  * [[VUID-vkDestroyFramebuffer-framebuffer-00894]]
    If no sname:VkAllocationCallbacks were provided when pname:framebuffer
    was created, pname:pAllocator must: be `NULL`
****

include::../validity/protos/vkDestroyFramebuffer.txt[]
--


[[renderpass-commands]]
== Render Pass Commands

An application records the commands for a render pass instance one subpass
at a time, by beginning a render pass instance, iterating over the subpasses
to record commands for that subpass, and then ending the render pass
instance.

[open,refpage='vkCmdBeginRenderPass',desc='Begin a new render pass',type='protos']
--

To begin a render pass instance, call:

include::../api/protos/vkCmdBeginRenderPass.txt[]

  * pname:commandBuffer is the command buffer in which to record the
    command.
  * pname:pRenderPassBegin is a pointer to a slink:VkRenderPassBeginInfo
    structure (defined below) which specifies the render pass to begin an
    instance of, and the framebuffer the instance uses.
  * pname:contents is a elink:VkSubpassContents value specifying how the
    commands in the first subpass will be provided.

After beginning a render pass instance, the command buffer is ready to
record the commands for the first subpass of that render pass.

.Valid Usage
****
  * [[VUID-vkCmdBeginRenderPass-initialLayout-00895]]
    If any of the pname:initialLayout or pname:finalLayout member of the
    sname:VkAttachmentDescription structures or the pname:layout member of
    the sname:VkAttachmentReference structures specified when creating the
    render pass specified in the pname:renderPass member of
    pname:pRenderPassBegin is ename:VK_IMAGE_LAYOUT_COLOR_ATTACHMENT_OPTIMAL
    then the corresponding attachment image subresource of the framebuffer
    specified in the pname:framebuffer member of pname:pRenderPassBegin
    must: have been created with ename:VK_IMAGE_USAGE_COLOR_ATTACHMENT_BIT
    set
// The VU below comes in an alternate version when the extension is
// enabled.
ifndef::VK_VERSION_1_1,VK_KHR_maintenance2[]
  * [[VUID-vkCmdBeginRenderPass-initialLayout-00896]]
    If any of the pname:initialLayout or pname:finalLayout member of the
    sname:VkAttachmentDescription structures or the pname:layout member of
    the sname:VkAttachmentReference structures specified when creating the
    render pass specified in the pname:renderPass member of
    pname:pRenderPassBegin is
    ename:VK_IMAGE_LAYOUT_DEPTH_STENCIL_ATTACHMENT_OPTIMAL, or
    ename:VK_IMAGE_LAYOUT_DEPTH_STENCIL_READ_ONLY_OPTIMAL then the
    corresponding attachment image subresource of the framebuffer specified
    in the pname:framebuffer member of pname:pRenderPassBegin must: have
    been created with ename:VK_IMAGE_USAGE_DEPTH_STENCIL_ATTACHMENT_BIT set
endif::VK_VERSION_1_1,VK_KHR_maintenance2[]
// The nested ifdefs are there in anticipation of the hoped-for day when the
// VU extractor and validation layers can handle VU with imbedded
// conditionals.
ifdef::VK_VERSION_1_1,VK_KHR_maintenance2[]
  * [[VUID-vkCmdBeginRenderPass-initialLayout-01758]]
    If any of the pname:initialLayout or pname:finalLayout member of the
    sname:VkAttachmentDescription structures or the pname:layout member of
    the sname:VkAttachmentReference structures specified when creating the
    render pass specified in the pname:renderPass member of
    pname:pRenderPassBegin is
// ifdef::VK_VERSION_1_1,VK_KHR_maintenance2[]
    ename:VK_IMAGE_LAYOUT_DEPTH_READ_ONLY_STENCIL_ATTACHMENT_OPTIMAL,
    ename:VK_IMAGE_LAYOUT_DEPTH_ATTACHMENT_STENCIL_READ_ONLY_OPTIMAL,
// endif::VK_VERSION_1_1,VK_KHR_maintenance2[]
    ename:VK_IMAGE_LAYOUT_DEPTH_STENCIL_ATTACHMENT_OPTIMAL, or
    ename:VK_IMAGE_LAYOUT_DEPTH_STENCIL_READ_ONLY_OPTIMAL then the
    corresponding attachment image subresource of the framebuffer specified
    in the pname:framebuffer member of pname:pRenderPassBegin must: have
    been created with ename:VK_IMAGE_USAGE_DEPTH_STENCIL_ATTACHMENT_BIT set
endif::VK_VERSION_1_1,VK_KHR_maintenance2[]
  * [[VUID-vkCmdBeginRenderPass-initialLayout-00897]]
    If any of the pname:initialLayout or pname:finalLayout member of the
    sname:VkAttachmentDescription structures or the pname:layout member of
    the sname:VkAttachmentReference structures specified when creating the
    render pass specified in the pname:renderPass member of
    pname:pRenderPassBegin is ename:VK_IMAGE_LAYOUT_SHADER_READ_ONLY_OPTIMAL
    then the corresponding attachment image subresource of the framebuffer
    specified in the pname:framebuffer member of pname:pRenderPassBegin
    must: have been created with ename:VK_IMAGE_USAGE_SAMPLED_BIT or
    ename:VK_IMAGE_USAGE_INPUT_ATTACHMENT_BIT set
  * [[VUID-vkCmdBeginRenderPass-initialLayout-00898]]
    If any of the pname:initialLayout or pname:finalLayout member of the
    sname:VkAttachmentDescription structures or the pname:layout member of
    the sname:VkAttachmentReference structures specified when creating the
    render pass specified in the pname:renderPass member of
    pname:pRenderPassBegin is ename:VK_IMAGE_LAYOUT_TRANSFER_SRC_OPTIMAL
    then the corresponding attachment image subresource of the framebuffer
    specified in the pname:framebuffer member of pname:pRenderPassBegin
    must: have been created with ename:VK_IMAGE_USAGE_TRANSFER_SRC_BIT set
  * [[VUID-vkCmdBeginRenderPass-initialLayout-00899]]
    If any of the pname:initialLayout or pname:finalLayout member of the
    sname:VkAttachmentDescription structures or the pname:layout member of
    the sname:VkAttachmentReference structures specified when creating the
    render pass specified in the pname:renderPass member of
    pname:pRenderPassBegin is ename:VK_IMAGE_LAYOUT_TRANSFER_DST_OPTIMAL
    then the corresponding attachment image subresource of the framebuffer
    specified in the pname:framebuffer member of pname:pRenderPassBegin
    must: have been created with ename:VK_IMAGE_USAGE_TRANSFER_DST_BIT set
  * [[VUID-vkCmdBeginRenderPass-initialLayout-00900]]
    If any of the pname:initialLayout members of the
    sname:VkAttachmentDescription structures specified when creating the
    render pass specified in the pname:renderPass member of
    pname:pRenderPassBegin is not ename:VK_IMAGE_LAYOUT_UNDEFINED, then each
    such pname:initialLayout must: be equal to the current layout of the
    corresponding attachment image subresource of the framebuffer specified
    in the pname:framebuffer member of pname:pRenderPassBegin
  * [[VUID-vkCmdBeginRenderPass-srcStageMask-00901]]
    The pname:srcStageMask and pname:dstStageMask members of any element of
    the pname:pDependencies member of slink:VkRenderPassCreateInfo used to
    create pname:renderPass must: be supported by the capabilities of the
    queue family identified by the pname:queueFamilyIndex member of the
    slink:VkCommandPoolCreateInfo used to create the command pool which
    pname:commandBuffer was allocated from.
****

include::../validity/protos/vkCmdBeginRenderPass.txt[]
--

[open,refpage='VkRenderPassBeginInfo',desc='Structure specifying render pass begin info',type='structs']
--

The sname:VkRenderPassBeginInfo structure is defined as:

include::../api/structs/VkRenderPassBeginInfo.txt[]

  * pname:sType is the type of this structure.
  * pname:pNext is `NULL` or a pointer to an extension-specific structure.
  * pname:renderPass is the render pass to begin an instance of.
  * pname:framebuffer is the framebuffer containing the attachments that are
    used with the render pass.
  * pname:renderArea is the render area that is affected by the render pass
    instance, and is described in more detail below.
  * pname:clearValueCount is the number of elements in pname:pClearValues.
  * pname:pClearValues is an array of slink:VkClearValue structures that
    contains clear values for each attachment, if the attachment uses a
    pname:loadOp value of ename:VK_ATTACHMENT_LOAD_OP_CLEAR or if the
    attachment has a depth/stencil format and uses a pname:stencilLoadOp
    value of ename:VK_ATTACHMENT_LOAD_OP_CLEAR.
    The array is indexed by attachment number.
    Only elements corresponding to cleared attachments are used.
    Other elements of pname:pClearValues are ignored.

pname:renderArea is the render area that is affected by the render pass
instance.
The effects of attachment load, store and multisample resolve operations are
restricted to the pixels whose x and y coordinates fall within the render
area on all attachments.
The render area extends to all layers of pname:framebuffer.
The application must: ensure (using scissor if necessary) that all rendering
is contained within the render area, otherwise the pixels outside of the
render area become undefined and shader side effects may: occur for
fragments outside the render area.
The render area must: be contained within the framebuffer dimensions.

ifdef::VK_VERSION_1_1,VK_KHR_multiview[]

When multiview is enabled, the resolve operation at the end of a subpass
applies to all views in the view mask.

endif::VK_VERSION_1_1,VK_KHR_multiview[]

[NOTE]
.Note
====
There may: be a performance cost for using a render area smaller than the
framebuffer, unless it matches the render area granularity for the render
pass.
====

.Valid Usage
****
  * [[VUID-VkRenderPassBeginInfo-clearValueCount-00902]]
    pname:clearValueCount must: be greater than the largest attachment index
    in pname:renderPass that specifies a pname:loadOp (or
    pname:stencilLoadOp, if the attachment has a depth/stencil format) of
    ename:VK_ATTACHMENT_LOAD_OP_CLEAR
  * [[VUID-VkRenderPassBeginInfo-clearValueCount-00903]]
    If pname:clearValueCount is not `0`, pname:pClearValues must: be a valid
    pointer to an array of pname:clearValueCount valid sname:VkClearValue
    unions
  * [[VUID-VkRenderPassBeginInfo-renderPass-00904]]
    pname:renderPass must: be <<renderpass-compatibility,compatible>> with
    the pname:renderPass member of the sname:VkFramebufferCreateInfo
    structure specified when creating pname:framebuffer.
****

include::../validity/structs/VkRenderPassBeginInfo.txt[]
--

ifdef::VK_EXT_sample_locations[]

[open,refpage='VkRenderPassSampleLocationsBeginInfoEXT',desc='Structure specifying sample locations to use for the layout transition of custom sample locations compatible depth/stencil attachments',type='structs']
--

The image layout of the depth aspect of a depth/stencil attachment referring
to an image created with
ename:VK_IMAGE_CREATE_SAMPLE_LOCATIONS_COMPATIBLE_DEPTH_BIT_EXT is dependent
on the last sample locations used to render to the image subresource, thus
preserving the contents of such depth/stencil attachments across subpass
boundaries requires the application to specify these sample locations
whenever a layout transition of the attachment may: occur.
This information can: be provided by chaining an instance of the
sname:VkRenderPassSampleLocationsBeginInfoEXT structure to the pname:pNext
chain of sname:VkRenderPassBeginInfo.

The sname:VkRenderPassSampleLocationsBeginInfoEXT structure is defined as:

include::../api/structs/VkRenderPassSampleLocationsBeginInfoEXT.txt[]

  * pname:sType is the type of this structure.
  * pname:pNext is `NULL` or a pointer to an extension-specific structure.
  * pname:attachmentInitialSampleLocationsCount is the number of elements in
    the pname:pAttachmentInitialSampleLocations array.
  * pname:pAttachmentInitialSampleLocations is an array of
    pname:attachmentInitialSampleLocationsCount
    slink:VkAttachmentSampleLocationsEXT structures specifying the
    attachment indices and their corresponding sample location state.
    Each element of pname:pAttachmentInitialSampleLocations can: specify the
    sample location state to use in the automatic layout transition
    performed to transition a depth/stencil attachment from the initial
    layout of the attachment to the image layout specified for the
    attachment in the first subpass using it.
  * pname:postSubpassSampleLocationsCount is the number of elements in the
    pname:pPostSubpassSampleLocations array.
  * pname:pPostSubpassSampleLocations is an array of
    pname:postSubpassSampleLocationsCount slink:VkSubpassSampleLocationsEXT
    structures specifying the subpass indices and their corresponding sample
    location state.
    Each element of pname:pPostSubpassSampleLocations can: specify the
    sample location state to use in the automatic layout transition
    performed to transition the depth/stencil attachment used by the
    specified subpass to the image layout specified in a dependent subpass
    or to the final layout of the attachment in case the specified subpass
    is the last subpass using that attachment.
    In addition, if
    slink:VkPhysicalDeviceSampleLocationsPropertiesEXT::pname:variableSampleLocations
    is ename:VK_FALSE, each element of pname:pPostSubpassSampleLocations
    must: specify the sample location state that matches the sample
    locations used by all pipelines that will be bound to a command buffer
    during the specified subpass.
    If pname:variableSampleLocations is ename:VK_TRUE, the sample locations
    used for rasterization do not depend on
    pname:pPostSubpassSampleLocations.

include::../validity/structs/VkRenderPassSampleLocationsBeginInfoEXT.txt[]
--

[open,refpage='VkAttachmentSampleLocationsEXT',desc='Structure specifying the sample locations state to use in the initial layout transition of attachments',type='structs']
--

The sname:VkAttachmentSampleLocationsEXT structure is defined as:

include::../api/structs/VkAttachmentSampleLocationsEXT.txt[]

  * pname:attachmentIndex is the index of the attachment for which the
    sample locations state is provided.
  * pname:sampleLocationsInfo is the sample locations state to use for the
    layout transition of the given attachment from the initial layout of the
    attachment to the image layout specified for the attachment in the first
    subpass using it.

If the image referenced by the framebuffer attachment at index
pname:attachmentIndex was not created with
ename:VK_IMAGE_CREATE_SAMPLE_LOCATIONS_COMPATIBLE_DEPTH_BIT_EXT then the
values specified in pname:sampleLocationsInfo are ignored.

.Valid Usage
****
  * [[VUID-VkAttachmentSampleLocationsEXT-attachmentIndex-01531]]
    pname:attachmentIndex must: be less than the pname:attachmentCount
    specified in slink:VkRenderPassCreateInfo the render pass specified by
    slink:VkRenderPassBeginInfo::pname:renderPass was created with
****

include::../validity/structs/VkAttachmentSampleLocationsEXT.txt[]
--

[open,refpage='VkSubpassSampleLocationsEXT',desc='Structure specifying the sample locations state to use for layout transitions of attachments performed after a given subpass',type='structs']
--

The sname:VkSubpassSampleLocationsEXT structure is defined as:

include::../api/structs/VkSubpassSampleLocationsEXT.txt[]

  * pname:subpassIndex is the index of the subpass for which the sample
    locations state is provided.
  * pname:sampleLocationsInfo is the sample locations state to use for the
    layout transition of the depth/stencil attachment away from the image
    layout the attachment is used with in the subpass specified in
    pname:subpassIndex.

If the image referenced by the depth/stencil attachment used in the subpass
identified by pname:subpassIndex was not created with
ename:VK_IMAGE_CREATE_SAMPLE_LOCATIONS_COMPATIBLE_DEPTH_BIT_EXT or if the
subpass does not use a depth/stencil attachment, and
slink:VkPhysicalDeviceSampleLocationsPropertiesEXT::pname:variableSampleLocations
is ename:VK_TRUE then the values specified in pname:sampleLocationsInfo are
ignored.

.Valid Usage
****
  * [[VUID-VkSubpassSampleLocationsEXT-subpassIndex-01532]]
    pname:subpassIndex must: be less than the pname:subpassCount specified
    in slink:VkRenderPassCreateInfo the render pass specified by
    slink:VkRenderPassBeginInfo::pname:renderPass was created with
****

include::../validity/structs/VkSubpassSampleLocationsEXT.txt[]
--

endif::VK_EXT_sample_locations[]

[open,refpage='VkSubpassContents',desc='Specify how commands in the first subpass of a render pass are provided',type='enums']
--

Possible values of flink:vkCmdBeginRenderPass::pname:contents, specifying
how the commands in the first subpass will be provided, are:

include::../api/enums/VkSubpassContents.txt[]

  * ename:VK_SUBPASS_CONTENTS_INLINE specifies that the contents of the
    subpass will be recorded inline in the primary command buffer, and
    secondary command buffers must: not be executed within the subpass.
  * ename:VK_SUBPASS_CONTENTS_SECONDARY_COMMAND_BUFFERS specifies that the
    contents are recorded in secondary command buffers that will be called
    from the primary command buffer, and flink:vkCmdExecuteCommands is the
    only valid command on the command buffer until flink:vkCmdNextSubpass or
    flink:vkCmdEndRenderPass.

--

ifdef::VK_VERSION_1_1,VK_KHR_device_group[]

[open,refpage='VkDeviceGroupRenderPassBeginInfo',desc='Set the initial device mask and render areas for a render pass instance',type='structs']
--

If the pname:pNext chain of slink:VkRenderPassBeginInfo includes a
sname:VkDeviceGroupRenderPassBeginInfo structure, then that structure
includes a device mask and set of render areas for the render pass instance.

The sname:VkDeviceGroupRenderPassBeginInfo structure is defined as:

include::../api/structs/VkDeviceGroupRenderPassBeginInfo.txt[]

ifdef::VK_KHR_device_group[]
or the equivalent

include::../api/structs/VkDeviceGroupRenderPassBeginInfoKHR.txt[]
endif::VK_KHR_device_group[]

  * pname:sType is the type of this structure.
  * pname:pNext is `NULL` or a pointer to an extension-specific structure.
  * pname:deviceMask is the device mask for the render pass instance.
  * pname:deviceRenderAreaCount is the number of elements in the
    pname:pDeviceRenderAreas array.
  * pname:pDeviceRenderAreas is an array of structures of type
    slink:VkRect2D defining the render area for each physical device.

The pname:deviceMask serves several purposes.
It is an upper bound on the set of physical devices that can: be used during
the render pass instance, and the initial device mask when the render pass
instance begins.
Render pass attachment load, store, and resolve operations only apply to
physical devices included in the device mask.
Subpass dependencies only apply to the physical devices in the device mask.

If pname:deviceRenderAreaCount is not zero, then the elements of
pname:pDeviceRenderAreas override the value of
slink:VkRenderPassBeginInfo::pname:renderArea, and provide a render area
specific to each physical device.
These render areas serve the same purpose as
slink:VkRenderPassBeginInfo::pname:renderArea, including controlling the
region of attachments that are cleared by ename:VK_ATTACHMENT_LOAD_OP_CLEAR
and that are resolved into resolve attachments.

If this structure is not present, the render pass instance's device mask is
the value of slink:VkDeviceGroupCommandBufferBeginInfo::pname:deviceMask.
If this structure is not present or if pname:deviceRenderAreaCount is zero,
slink:VkRenderPassBeginInfo::pname:renderArea is used for all physical
devices.

.Valid Usage
****
  * [[VUID-VkDeviceGroupRenderPassBeginInfo-deviceMask-00905]]
    pname:deviceMask must: be a valid device mask value
  * [[VUID-VkDeviceGroupRenderPassBeginInfo-deviceMask-00906]]
    pname:deviceMask must: not be zero
  * [[VUID-VkDeviceGroupRenderPassBeginInfo-deviceMask-00907]]
    pname:deviceMask must: be a subset of the command buffer's initial
    device mask
  * [[VUID-VkDeviceGroupRenderPassBeginInfo-deviceRenderAreaCount-00908]]
    pname:deviceRenderAreaCount must: either be zero or equal to the number
    of physical devices in the logical device.
****

include::../validity/structs/VkDeviceGroupRenderPassBeginInfo.txt[]
--

endif::VK_VERSION_1_1,VK_KHR_device_group[]

[open,refpage='vkGetRenderAreaGranularity',desc='Returns the granularity for optimal render area',type='protos']
--

To query the render area granularity, call:

include::../api/protos/vkGetRenderAreaGranularity.txt[]

  * pname:device is the logical device that owns the render pass.
  * pname:renderPass is a handle to a render pass.
  * pname:pGranularity points to a slink:VkExtent2D structure in which the
    granularity is returned.

The conditions leading to an optimal pname:renderArea are:

  * the pname:offset.x member in pname:renderArea is a multiple of the
    pname:width member of the returned slink:VkExtent2D (the horizontal
    granularity).
  * the pname:offset.y member in pname:renderArea is a multiple of the
    pname:height of the returned slink:VkExtent2D (the vertical
    granularity).
  * either the pname:offset.width member in pname:renderArea is a multiple
    of the horizontal granularity or pname:offset.x+pname:offset.width is
    equal to the pname:width of the pname:framebuffer in the
    slink:VkRenderPassBeginInfo.
  * either the pname:offset.height member in pname:renderArea is a multiple
    of the vertical granularity or pname:offset.y+pname:offset.height is
    equal to the pname:height of the pname:framebuffer in the
    slink:VkRenderPassBeginInfo.

Subpass dependencies are not affected by the render area, and apply to the
entire image subresources attached to the framebuffer as specified in the
description of <<renderpass-layout-transitions,automatic layout
transitions>>.
Similarly, pipeline barriers are valid even if their effect extends outside
the render area.

include::../validity/protos/vkGetRenderAreaGranularity.txt[]
--

[open,refpage='vkCmdNextSubpass',desc='Transition to the next subpass of a render pass',type='protos']
--

To transition to the next subpass in the render pass instance after
recording the commands for a subpass, call:

include::../api/protos/vkCmdNextSubpass.txt[]

  * pname:commandBuffer is the command buffer in which to record the
    command.
  * pname:contents specifies how the commands in the next subpass will be
    provided, in the same fashion as the corresponding parameter of
    flink:vkCmdBeginRenderPass.

The subpass index for a render pass begins at zero when
fname:vkCmdBeginRenderPass is recorded, and increments each time
fname:vkCmdNextSubpass is recorded.

Moving to the next subpass automatically performs any multisample resolve
operations in the subpass being ended.
End-of-subpass multisample resolves are treated as color attachment writes
for the purposes of synchronization.
That is, they are considered to execute in the
ename:VK_PIPELINE_STAGE_COLOR_ATTACHMENT_OUTPUT_BIT pipeline stage and their
writes are synchronized with ename:VK_ACCESS_COLOR_ATTACHMENT_WRITE_BIT.
Synchronization between rendering within a subpass and any resolve
operations at the end of the subpass occurs automatically, without need for
explicit dependencies or pipeline barriers.
However, if the resolve attachment is also used in a different subpass, an
explicit dependency is needed.

After transitioning to the next subpass, the application can: record the
commands for that subpass.

.Valid Usage
****
  * [[VUID-vkCmdNextSubpass-None-00909]]
    The current subpass index must: be less than the number of subpasses in
    the render pass minus one
****

include::../validity/protos/vkCmdNextSubpass.txt[]
--

[open,refpage='vkCmdEndRenderPass',desc='End the current render pass',type='protos']
--

To record a command to end a render pass instance after recording the
commands for the last subpass, call:

include::../api/protos/vkCmdEndRenderPass.txt[]

  * pname:commandBuffer is the command buffer in which to end the current
    render pass instance.

Ending a render pass instance performs any multisample resolve operations on
the final subpass.

.Valid Usage
****
  * [[VUID-vkCmdEndRenderPass-None-00910]]
    The current subpass index must: be equal to the number of subpasses in
    the render pass minus one
****

include::../validity/protos/vkCmdEndRenderPass.txt[]
--