status-im
/
Vulkan-Docs
mirror of https://github.com/status-im/Vulkan-Docs.git
2
0
Fork 0
Code Issues Projects Releases Wiki Activity
Vulkan-Docs/doc/specs/vulkan/chapters/samplers.txt

309 lines
14 KiB
Plaintext
Raw Normal View History

Change log for January 23, 2017 Vulkan 1.0.39 spec update: * Bump API patch number and header version number to 39 for this update. Github Issues: * Clarified that only accesses via the specified buffer/image subresource ranges are included in the access scopes (public issue 306). * Add missing valid usage statements for flink:vkCreateComputePipelines and flink:vkCreateGraphicsPipelines (public issue 427). Internal Issues: * Add a Note to the <<invariance,Invariance>> appendix about a difference between OpenGL and Vulkan with regards to how primitives derived from offsets are handled (internal issue 355). * Add the +<<VK_KHR_get_physical_device_properties2>>+, +<<VK_KHR_maintenance1>>+, and +<<VK_KHR_shader_draw_parameters>>+ extensions (internal issue 448). * Add the +<<VK_EXT_shader_subgroup_vote>>+ and +<<VK_EXT_shader_subgroup_ballot>>+ extensions (internal issue 449). * Update the texture level-of-detail equation in the <<textures-scale-factor,Scale Factor Operation>> section to better approximate the ellipse major and minor axes (internal issue 547). * Forbid non-explicitly allowed uses of interface decorations in the introduction to the <<interfaces,Shader Interfaces>> chapter (internal issue 607). * Replace use of MathJax with KaTeX, for improved load-time performance as well as avoiding the scrolling-and-scrolling behavior due to MathJax asynchronous rendering when loading at an anchor inside the spec. This change also requires moving to HTML5 output for the spec instead of XHTML, and there is a visible difference in that the chapter navigation index is now in a scrollable sidebar instead of at the top of the document. We may or may not retain the nav sidebar based on feedback (internal issue 613). * Improve consistency of markup and formatting in extension appendices (internal issue 631). Other Issues: * Add explicit valid usage statements to slink:VkImageCopy requiring that the source and destination layer ranges be contained in their respective source and destination images. * Add valid usage language for swapchain of flink:vkAcquireNextImage. If the swapchain has been replaced, then it should not be passed to flink:vkAcquireNextImage. * Add a valid usage statement to flink:vkCreateImageView, that the image must have been created with an appropriate usage bit set. * Noted that slink:VkDisplayPresentInfoKHR is a valid extension of slink:VkPresentInfoKHR in the <<wsi_swapchain,WSI Swapchain>> section. * Update valid usage for flink:vkCmdSetViewport and flink:vkCmdSetScissor to account for the multiple viewport feature. If the feature is not enabled, the parameters for these functions have required values that are defined in the <<features-features-multiViewport,multiple viewports>> section of the spec but were not reflected in the valid usage text for these functions. * Add the +<<VK_EXT_swapchain_colorspace>>+ extension defining common color spaces.
2017-01-18 04:11:25 +00:00
// Copyright (c) 2015-2017 The Khronos Group Inc.
Vulkan 1.0 branch 1.0 for release
2016-02-16 09:53:44 +00:00
// Copyright notice at https://www.khronos.org/registry/speccopyright.html
[[samplers]]
= Samplers
Change log for September 16, 2016 Vulkan 1.0.27 spec update: * Bump API patch number and header version number to 27 for this update. Github Issues: * Weaken flink:vkGetPipelineCacheData invariance conditions; previous conditions were stronger than agreed and can't be guaranteed (public issue 280). * Add link to "Vulkan Loader Specification and Architecture Overview" document to Normative References section (public issue 359). Internal Issues: * Be more clear in the <<interfaces-resources-layout-std140, uniform buffer layout>> section that block offsets can be out of order (internal issue 396). * Document that extension authors should add support for their extensions to the validation layers (internal issue 398). * Clarify that the valid range of depth clear values should be limited to the 0..1 range and that copies to depth aspect must also be in this range (internal issue 412). * Specify ``a'' vs. ``an'' use in the style guide (internal issue 432). * Increase the maximum pname:nonCoherentAtomSize value in the <<features-limits-required,Required Limits>> section from 128 to 256 (internal issue 435). * Fix vk_platform.h for compiler errors on some Android platforms (internal issue 441). * Clarify that slink:VkPhysicalDeviceFeatures::pname:pEnabledFeatures == `NULL` disables all features, including the "required" feature pname:robustBufferAccess (internal issue 479). Other Issues: * Expand style guide and make it more self-consistent. * Use ISO 8601 date format everywhere. * Emphasise the correct way of using slink:VkSurfaceCapabilitiesKHR::pname:maxImageCount. * Added +VK_EXT_validation_flags+ extension for validation flag mechanism. * Fix an <<credits,author credit>> to include their current employer.
2016-09-17 04:22:17 +00:00
// refBegin VkSampler Opaque handle to a sampler object
Change log for July 10, 2016 Vulkan 1.0.20 spec update: * Bump API patch number and header version number to 20 for this update. Github Issues: * Replaced existing reference pages by text automatically extracted from the specification source, or generated from vk.xml in some cases. This isn't a complete solution for the reference pages, but puts them in a much better state. The ref pages (only) are now placed under a CC BY open source license, which is more current than the obsolete license previously used. Further improvements to the pages should not edit them directly, but instead concentrate on the specification source from which the ref pages are being extracted (public issues 44, 55, 160; internal issue 389).
2016-07-11 01:13:41 +00:00
sname:VkSampler objects represent the state of an image sampler which is
Vulkan 1.0 branch 1.0 for release
2016-02-16 09:53:44 +00:00
used by the implementation to read image data and apply filtering and other
transformations for the shader.
Change log for July 10, 2016 Vulkan 1.0.20 spec update: * Bump API patch number and header version number to 20 for this update. Github Issues: * Replaced existing reference pages by text automatically extracted from the specification source, or generated from vk.xml in some cases. This isn't a complete solution for the reference pages, but puts them in a much better state. The ref pages (only) are now placed under a CC BY open source license, which is more current than the obsolete license previously used. Further improvements to the pages should not edit them directly, but instead concentrate on the specification source from which the ref pages are being extracted (public issues 44, 55, 160; internal issue 389).
2016-07-11 01:13:41 +00:00
Samplers are represented by sname:VkSampler handles:
Change log for July 22, 2016 Vulkan 1.0.22 spec update: * Bump API patch number and header version number to 22 for this update. Github Issues: * Translate the subpass self-dependency language into concrete validity statements, and added a validity statement about the restrictions on layout parameters (public issue 267). * Add validity requirement that slink:VkAttachmentDescription::pname:finalLayout and slink:VkAttachmentReference::pname:layout must not be ename:VK_IMAGE_LAYOUT_UNDEFINED or ename:VK_IMAGE_LAYOUT_PREINITIALIZED (public issue 268). * Clarify that slink:VkSubpassDescription::pname:pResolveAttachments layouts are used. Make language consistent with other attachment arrays (public issue 270). * Changed 64-bit definition for dname:VK_DEFINE_NON_DISPATCHABLE_HANDLE to work for x32 platform in +vk.xml+ and the resulting +vulkan.h+ (public issue 282). * Add missing error return code for flink:vkEnumerateInstanceExtensionProperties and flink:vkEnumerateDeviceExtensionProperties (public issue 285) * Fix several cases of stext::VkStructName.memberName markup to stext::VkStructName::pname:memberName, to match other usage in the spec, and describe this markup in the style guide (public issue 286). * Modified validity language generation script to avoid redundant common ancestor language if covered by generic parent language, and used `Both' instead of `Each' when appropriate (public issue 288). Internal Issues: * Add language about behavior of flink:vkAllocateDescriptorSets when allocation fails due to fragmentation, a new error ename:VK_ERROR_FRAGMENTED_POOL, and a Note explaining the situation (internal issue 309). * For the features of code:PointSize, code:ClipDistance, and code:CullDistance, the SPIR-V capability is required to be declared on use (read or write) rather than on decoration (internal issue 359). * Have desktop versions of GLSL respect precision qualification (code:mediump and code:lowp) when compiling for Vulkan. These will get translated to SPIR-V's code:RelaxedPrecision decoration as they do with OpenGL ES versions of GLSL (ESSL). The default precision of all types is code:highp when using a desktop version (internal issue 360). * Add validity statement for slink:VkImageCreateInfo specifying that multisampled images must be two-dimensional, optimally tiled, and with a single mipmap level (internal issue 369). * Add validity statements to slink:VkImageViewCreateInfo disallowing creation of images or image views with no supported features. Made some slink:VkImageViewCreateInfo validity statements more precise and consistent. Added a Note to the <<features,features>> chapter about formats with no features (internal issue 371). * Remove +manpages+ from default build targets. Nroff outputs containing imbedded latexmath will not render properly. Fixing this is a lot of work for limited use cases (internal issue 401). Other Commits: * Fix flink:vkRenderPassBeginInfo::pname:clearValueCount validity statement to be based on attachment indices rather than the number of cleared attachments (Vulkan-LoaderAndValidationLayers/issues/601). * Convert registry documentation from LaTeX to asciidoc source and rename from +src/spec/readme.tex+ to +src/spec/registry.txt+. * Fix lack of Oxford commas in validity language. * Lots of cleanup of generator scripts and Makefiles to move extension list for generator into the script arguments instead of the body of genvk.py, and express better dependencies between XML, scripts, and generated files.
2016-07-23 10:15:48 +00:00
include::../api/handles/VkSampler.txt[]
Change log for July 10, 2016 Vulkan 1.0.20 spec update: * Bump API patch number and header version number to 20 for this update. Github Issues: * Replaced existing reference pages by text automatically extracted from the specification source, or generated from vk.xml in some cases. This isn't a complete solution for the reference pages, but puts them in a much better state. The ref pages (only) are now placed under a CC BY open source license, which is more current than the obsolete license previously used. Further improvements to the pages should not edit them directly, but instead concentrate on the specification source from which the ref pages are being extracted (public issues 44, 55, 160; internal issue 389).
2016-07-11 01:13:41 +00:00
// refEnd VkSampler
// refBegin vkCreateSampler Create a new sampler object
Vulkan 1.0 branch 1.0 for release
2016-02-16 09:53:44 +00:00
To create a sampler object, call:
Change log for July 22, 2016 Vulkan 1.0.22 spec update: * Bump API patch number and header version number to 22 for this update. Github Issues: * Translate the subpass self-dependency language into concrete validity statements, and added a validity statement about the restrictions on layout parameters (public issue 267). * Add validity requirement that slink:VkAttachmentDescription::pname:finalLayout and slink:VkAttachmentReference::pname:layout must not be ename:VK_IMAGE_LAYOUT_UNDEFINED or ename:VK_IMAGE_LAYOUT_PREINITIALIZED (public issue 268). * Clarify that slink:VkSubpassDescription::pname:pResolveAttachments layouts are used. Make language consistent with other attachment arrays (public issue 270). * Changed 64-bit definition for dname:VK_DEFINE_NON_DISPATCHABLE_HANDLE to work for x32 platform in +vk.xml+ and the resulting +vulkan.h+ (public issue 282). * Add missing error return code for flink:vkEnumerateInstanceExtensionProperties and flink:vkEnumerateDeviceExtensionProperties (public issue 285) * Fix several cases of stext::VkStructName.memberName markup to stext::VkStructName::pname:memberName, to match other usage in the spec, and describe this markup in the style guide (public issue 286). * Modified validity language generation script to avoid redundant common ancestor language if covered by generic parent language, and used `Both' instead of `Each' when appropriate (public issue 288). Internal Issues: * Add language about behavior of flink:vkAllocateDescriptorSets when allocation fails due to fragmentation, a new error ename:VK_ERROR_FRAGMENTED_POOL, and a Note explaining the situation (internal issue 309). * For the features of code:PointSize, code:ClipDistance, and code:CullDistance, the SPIR-V capability is required to be declared on use (read or write) rather than on decoration (internal issue 359). * Have desktop versions of GLSL respect precision qualification (code:mediump and code:lowp) when compiling for Vulkan. These will get translated to SPIR-V's code:RelaxedPrecision decoration as they do with OpenGL ES versions of GLSL (ESSL). The default precision of all types is code:highp when using a desktop version (internal issue 360). * Add validity statement for slink:VkImageCreateInfo specifying that multisampled images must be two-dimensional, optimally tiled, and with a single mipmap level (internal issue 369). * Add validity statements to slink:VkImageViewCreateInfo disallowing creation of images or image views with no supported features. Made some slink:VkImageViewCreateInfo validity statements more precise and consistent. Added a Note to the <<features,features>> chapter about formats with no features (internal issue 371). * Remove +manpages+ from default build targets. Nroff outputs containing imbedded latexmath will not render properly. Fixing this is a lot of work for limited use cases (internal issue 401). Other Commits: * Fix flink:vkRenderPassBeginInfo::pname:clearValueCount validity statement to be based on attachment indices rather than the number of cleared attachments (Vulkan-LoaderAndValidationLayers/issues/601). * Convert registry documentation from LaTeX to asciidoc source and rename from +src/spec/readme.tex+ to +src/spec/registry.txt+. * Fix lack of Oxford commas in validity language. * Lots of cleanup of generator scripts and Makefiles to move extension list for generator into the script arguments instead of the body of genvk.py, and express better dependencies between XML, scripts, and generated files.
2016-07-23 10:15:48 +00:00
include::../api/protos/vkCreateSampler.txt[]
Vulkan 1.0 branch 1.0 for release
2016-02-16 09:53:44 +00:00
* pname:device is the logical device that creates the sampler.
* pname:pCreateInfo is a pointer to an instance of the
slink:VkSamplerCreateInfo structure specifying the state of the sampler
object.
* pname:pAllocator controls host memory allocation as described in the
<<memory-allocation, Memory Allocation>> chapter.
Change log for June 4, 2017 Vulkan 1.0.51 spec update: * Bump API patch number and header version number to 51 for this update. Github Issues: * Add Valid Usage statement to flink:vkCmdResolveImage to require that source and destination image formats match (public issue 492). * Specify that a code:char* parameter must: be a valid null-terminated string in the <<fundamentals-implicit-validity, implicit valid usage>> section (public issue 494). * Removed unnecessary VU for slink:VkPhysicalDeviceFeatures which is covered by ename:VK_ERROR_FEATURE_NOT_PRESENT already (public issue 496). * Clarify valid usage of pname:pQueueFamilyIndices in slink:VkBufferCreateInfo, slink:VkImageCreateInfo, and slink:VkSwapchainCreateInfoKHR (public issue 501). * Document that dependencies of enabled extensions must also be enabled in the <<extended-functionality-extensions-dependencies, Extension Dependencies>> section (public issue 507). Internal Issues: * Change slink:VkMappedMemoryRange valid usage to allow pname:offset + pname:size == size of the allocation. Also, if ename:VK_WHOLE_SIZE is used, require the end of the mapping to be aligned to a multiple of pname:nonCoherentAtomSize (internal issue 611). * Add issue to `VK_KHR_win32_surface` about reusing window objects from a different graphics API or Vulkan ICD (internal issue 639). * Require locations on user in/out in `GL_KHR_vulkan_glsl` (internal issue 783). * Added version info to the json validation output, and updated the schema to match (internal issue 838). * Restructure enumerated type descriptions separately from the command or structure they are used in, allowing better reference page generation (internal issue 841). * Re-sort extension appendices to be in alphabetical order within each author ID section. * Fix enum naming and clarify behavior for `VK_NVX_device_generated_commands` extension. New Extensions:
2017-06-05 03:48:43 +00:00
* pname:pSampler points to a slink:VkSampler handle in which the resulting
Vulkan 1.0 branch 1.0 for release
2016-02-16 09:53:44 +00:00
sampler object is returned.
include::../validity/protos/vkCreateSampler.txt[]
Change log for September 16, 2016 Vulkan 1.0.27 spec update: * Bump API patch number and header version number to 27 for this update. Github Issues: * Weaken flink:vkGetPipelineCacheData invariance conditions; previous conditions were stronger than agreed and can't be guaranteed (public issue 280). * Add link to "Vulkan Loader Specification and Architecture Overview" document to Normative References section (public issue 359). Internal Issues: * Be more clear in the <<interfaces-resources-layout-std140, uniform buffer layout>> section that block offsets can be out of order (internal issue 396). * Document that extension authors should add support for their extensions to the validation layers (internal issue 398). * Clarify that the valid range of depth clear values should be limited to the 0..1 range and that copies to depth aspect must also be in this range (internal issue 412). * Specify ``a'' vs. ``an'' use in the style guide (internal issue 432). * Increase the maximum pname:nonCoherentAtomSize value in the <<features-limits-required,Required Limits>> section from 128 to 256 (internal issue 435). * Fix vk_platform.h for compiler errors on some Android platforms (internal issue 441). * Clarify that slink:VkPhysicalDeviceFeatures::pname:pEnabledFeatures == `NULL` disables all features, including the "required" feature pname:robustBufferAccess (internal issue 479). Other Issues: * Expand style guide and make it more self-consistent. * Use ISO 8601 date format everywhere. * Emphasise the correct way of using slink:VkSurfaceCapabilitiesKHR::pname:maxImageCount. * Added +VK_EXT_validation_flags+ extension for validation flag mechanism. * Fix an <<credits,author credit>> to include their current employer.
2016-09-17 04:22:17 +00:00
// refBegin VkSamplerCreateInfo Structure specifying parameters of a newly created sampler
Change log for July 10, 2016 Vulkan 1.0.20 spec update: * Bump API patch number and header version number to 20 for this update. Github Issues: * Replaced existing reference pages by text automatically extracted from the specification source, or generated from vk.xml in some cases. This isn't a complete solution for the reference pages, but puts them in a much better state. The ref pages (only) are now placed under a CC BY open source license, which is more current than the obsolete license previously used. Further improvements to the pages should not edit them directly, but instead concentrate on the specification source from which the ref pages are being extracted (public issues 44, 55, 160; internal issue 389).
2016-07-11 01:13:41 +00:00
Change log for April 22, 2016 Vulkan 1.0.11 spec update: * Bump API patch number and header version number to 11 for this update. Github Issues: * Clarify the WSI extension language by switching from the fuzzier "ownership" language to more-consistent "acquire" language (public issue 117). * Clarify that memory barriers apply to all commands in the dependency chains in the flink:vkGetRenderAreaGranularity command and the <<synchronization-execution-and-memory-dependencies,Execution And Memory Dependencies>> section (public issue 132). * Clarify that a queue family is a set of queues in the <<fundamentals-execmodel,Execution Model>> section (public issue 166). * Removed requirement from valid usage language that VkPresentInfoKHR::waitSemaphoreCount must be greater than 0 (public issue 171). * Fix broken internal links, describe structures consistently, use consistent style for SPIR-V codewords, and tag normative terms that were missing asciidoc tags (public issue 183 and ancillary markup/normative language fixes). * Fix typos for slink:VkPhysicalDeviceLimits member names in slink:VkImageCreateInfo validity language (public issue 184). Internal Issues: * Document that the requested patch version number specified as part of slink:VkApplicationInfo::pname:apiVersion is ignored when creating an instance (internal issue 176). * Clarify handling of extension structs in the <<fundamentals-validusageValid Usage>> section (internal issue 254). * Update required slink:VkImageFormatProperties::pname:maxMipLevels to be limited to the maximum allowed mipmap pyramid size corresponding to the actual maximum supported size for the format (internal issue 256). * Modify the <<features-extentperimagetype,Allowed Extent Values Based On Image Type>> section so the allowed maximum extent is the maximum image dimension supported for each dimension of the type of texture being queried (internal issue 257). * Clarify in the <<spirvenv-module-validation,Validation Rules within a Module>> section that at least one of the code:LocalSize execution mode or code:WorkgroupSize decoration is required for each compute shader entry point in a shader module (internal issue 279). * Add validity rules for formats in flink:vkCmdClearColorImage and flink:vkCmdClearDepthStencilImage (internal issue 283). * Clarify that slink:VkImageFormatProperties::pname:maxResourceSize is an upper bound, and that it may not be possible to create an image anywhere near that size (internal issue 284). Other Commits: * Fix various minor markup errors reported by validation scripts. * Change copyright from Khronos Free Use License to Apache 2.0 license on relevant script/XML/header files. This does not affect the specification source copyright.
2016-04-21 08:08:38 +00:00
The sname:VkSamplerCreateInfo structure is defined as:
Vulkan 1.0 branch 1.0 for release
2016-02-16 09:53:44 +00:00
Change log for July 22, 2016 Vulkan 1.0.22 spec update: * Bump API patch number and header version number to 22 for this update. Github Issues: * Translate the subpass self-dependency language into concrete validity statements, and added a validity statement about the restrictions on layout parameters (public issue 267). * Add validity requirement that slink:VkAttachmentDescription::pname:finalLayout and slink:VkAttachmentReference::pname:layout must not be ename:VK_IMAGE_LAYOUT_UNDEFINED or ename:VK_IMAGE_LAYOUT_PREINITIALIZED (public issue 268). * Clarify that slink:VkSubpassDescription::pname:pResolveAttachments layouts are used. Make language consistent with other attachment arrays (public issue 270). * Changed 64-bit definition for dname:VK_DEFINE_NON_DISPATCHABLE_HANDLE to work for x32 platform in +vk.xml+ and the resulting +vulkan.h+ (public issue 282). * Add missing error return code for flink:vkEnumerateInstanceExtensionProperties and flink:vkEnumerateDeviceExtensionProperties (public issue 285) * Fix several cases of stext::VkStructName.memberName markup to stext::VkStructName::pname:memberName, to match other usage in the spec, and describe this markup in the style guide (public issue 286). * Modified validity language generation script to avoid redundant common ancestor language if covered by generic parent language, and used `Both' instead of `Each' when appropriate (public issue 288). Internal Issues: * Add language about behavior of flink:vkAllocateDescriptorSets when allocation fails due to fragmentation, a new error ename:VK_ERROR_FRAGMENTED_POOL, and a Note explaining the situation (internal issue 309). * For the features of code:PointSize, code:ClipDistance, and code:CullDistance, the SPIR-V capability is required to be declared on use (read or write) rather than on decoration (internal issue 359). * Have desktop versions of GLSL respect precision qualification (code:mediump and code:lowp) when compiling for Vulkan. These will get translated to SPIR-V's code:RelaxedPrecision decoration as they do with OpenGL ES versions of GLSL (ESSL). The default precision of all types is code:highp when using a desktop version (internal issue 360). * Add validity statement for slink:VkImageCreateInfo specifying that multisampled images must be two-dimensional, optimally tiled, and with a single mipmap level (internal issue 369). * Add validity statements to slink:VkImageViewCreateInfo disallowing creation of images or image views with no supported features. Made some slink:VkImageViewCreateInfo validity statements more precise and consistent. Added a Note to the <<features,features>> chapter about formats with no features (internal issue 371). * Remove +manpages+ from default build targets. Nroff outputs containing imbedded latexmath will not render properly. Fixing this is a lot of work for limited use cases (internal issue 401). Other Commits: * Fix flink:vkRenderPassBeginInfo::pname:clearValueCount validity statement to be based on attachment indices rather than the number of cleared attachments (Vulkan-LoaderAndValidationLayers/issues/601). * Convert registry documentation from LaTeX to asciidoc source and rename from +src/spec/readme.tex+ to +src/spec/registry.txt+. * Fix lack of Oxford commas in validity language. * Lots of cleanup of generator scripts and Makefiles to move extension list for generator into the script arguments instead of the body of genvk.py, and express better dependencies between XML, scripts, and generated files.
2016-07-23 10:15:48 +00:00
include::../api/structs/VkSamplerCreateInfo.txt[]
Vulkan 1.0 branch 1.0 for release
2016-02-16 09:53:44 +00:00
* pname:sType is the type of this structure.
* pname:pNext is `NULL` or a pointer to an extension-specific structure.
* pname:flags is reserved for future use.
Change log for June 4, 2017 Vulkan 1.0.51 spec update: * Bump API patch number and header version number to 51 for this update. Github Issues: * Add Valid Usage statement to flink:vkCmdResolveImage to require that source and destination image formats match (public issue 492). * Specify that a code:char* parameter must: be a valid null-terminated string in the <<fundamentals-implicit-validity, implicit valid usage>> section (public issue 494). * Removed unnecessary VU for slink:VkPhysicalDeviceFeatures which is covered by ename:VK_ERROR_FEATURE_NOT_PRESENT already (public issue 496). * Clarify valid usage of pname:pQueueFamilyIndices in slink:VkBufferCreateInfo, slink:VkImageCreateInfo, and slink:VkSwapchainCreateInfoKHR (public issue 501). * Document that dependencies of enabled extensions must also be enabled in the <<extended-functionality-extensions-dependencies, Extension Dependencies>> section (public issue 507). Internal Issues: * Change slink:VkMappedMemoryRange valid usage to allow pname:offset + pname:size == size of the allocation. Also, if ename:VK_WHOLE_SIZE is used, require the end of the mapping to be aligned to a multiple of pname:nonCoherentAtomSize (internal issue 611). * Add issue to `VK_KHR_win32_surface` about reusing window objects from a different graphics API or Vulkan ICD (internal issue 639). * Require locations on user in/out in `GL_KHR_vulkan_glsl` (internal issue 783). * Added version info to the json validation output, and updated the schema to match (internal issue 838). * Restructure enumerated type descriptions separately from the command or structure they are used in, allowing better reference page generation (internal issue 841). * Re-sort extension appendices to be in alphabetical order within each author ID section. * Fix enum naming and clarify behavior for `VK_NVX_device_generated_commands` extension. New Extensions:
2017-06-05 03:48:43 +00:00
* pname:magFilter is a elink:VkFilter value specifying the magnification
filter to apply to lookups.
* pname:minFilter is a elink:VkFilter value specifying the minification
filter to apply to lookups.
* pname:mipmapMode is a elink:VkSamplerMipmapMode value specifying the
mipmap filter to apply to lookups.
* pname:addressModeU is a elink:VkSamplerAddressMode value specifying the
addressing mode for outside [0..1] range for U coordinate.
* pname:addressModeV is a elink:VkSamplerAddressMode value specifying the
addressing mode for outside [0..1] range for V coordinate.
* pname:addressModeW is a elink:VkSamplerAddressMode value specifying the
addressing mode for outside [0..1] range for W coordinate.
Vulkan 1.0 branch 1.0 for release
2016-02-16 09:53:44 +00:00
* [[samplers-mipLodBias]] pname:mipLodBias is the bias to be added to
mipmap LOD calculation and bias provided by image sampling functions in
SPIR-V, as described in the <<textures-level-of-detail-operation,
Level-of-Detail Operation>> section.
* [[samplers-maxAnisotropy]] pname:anisotropyEnable is ename:VK_TRUE to
enable anisotropic filtering, as described in the
Change log for February 25, 2015 Vulkan 1.0.4 spec update: * Bump API patch number from 3 to 4 for the first public update to the spec. Add patch number to the spec title (this will be done automatically from XML, later). * Fixes for numerous editorial issues. Regularize descriptions of variable-length array queries. Properly tag enumerants so they come out in the right font (many were mislabeled in usage tags in vk.xml, or not tagged). Spelling and markup corrections (public issue 4). * Fix typos and clearly separate description of different types of memory areas (public issue 5). * Use standards-compliant preprocessor guard symbols on headers (public issue 7). * Note that Github users can't currently set labels on issues, and recommend a fallback approach (public issue 15). * Use latexmath prefix on len= attributes (public issue 29). * Make flink:vkCmdUpdateBuffer pname:dataSize limit consistent (public issue 65). * Add VK_KHR_mirror_clamp_to_edge extension to core API branch, as an optional feature not introducing new commands or enums (internal issue 104). * Cleanup invariance language inherited from the GL specification to not refer to nonexistent (GL-specific) state (internal issue 111). * Modify the flink:vkCmdDrawIndexed pname:vertexOffset definition to not be the "base offset within the index buffer" but rather the "value added to the vertex index before indexing into the vertex buffer" (internal issue 118). * Fix drawing chapter in the "Programmable Primitive Shading" section where it described categories of drawing commands. It referenced flink:vkCmdDrawIndexed twice. Replace the second reference with flink:vkCmdDrawIndexedIndirect (internal issue 119). * Typo fixed in <<sparsememory-examples-advanced,Advanced Sparse Resources>> sparse memory example (internal issue 122). * Add flink:VkDisplayPlaneAlphaFlagsKHR to <require> section of VK_KHR_display extension (internal issue 125) * Add missing optional="false,true" to flink:vkGetImageSparseMemoryRequirements pname:pSparseMemoryRequirementCount parameter (internal issue 132) * Rename ename:VK_STRUCTURE_TYPE_DEBUG_REPORT_CREATE_INFO_EXT to ename:VK_STRUCTURE_TYPE_DEBUG_REPORT_CALLBACK_CREATE_INFO_EXT (internal issue 133) * Fix a handful of broken cross-references in the <<samplers,Samplers>> chapter (internal issue 134). * Fix "Input Attachement" GLSL example to use correct syntax (internal issue 135). * Update XML schema and documentation to accomodate recently added attributes for validity. Add some introductory material describing design choices and pointing to the public repository to file issues. * Put include of validity in the core spec extensions chapter on its own line, so that asciidoc is happy. * Fix vertexOffset language to specify that it's the value added to the vertex index before indexing into the vertex buffer, not the base offset within the index buffer. * Fix error in the description of flink:vkCmdNextSubpass.
2016-02-25 06:02:34 +00:00
<<textures-texel-anisotropic-filtering, Texel Anisotropic Filtering>>
Vulkan 1.0 branch 1.0 for release
2016-02-16 09:53:44 +00:00
section, or ename:VK_FALSE otherwise.
* pname:maxAnisotropy is the anisotropy value clamp.
* pname:compareEnable is ename:VK_TRUE to enable comparison against a
reference value during lookups, or ename:VK_FALSE otherwise.
** Note: Some implementations will default to shader state if this member
does not match.
Change log for June 4, 2017 Vulkan 1.0.51 spec update: * Bump API patch number and header version number to 51 for this update. Github Issues: * Add Valid Usage statement to flink:vkCmdResolveImage to require that source and destination image formats match (public issue 492). * Specify that a code:char* parameter must: be a valid null-terminated string in the <<fundamentals-implicit-validity, implicit valid usage>> section (public issue 494). * Removed unnecessary VU for slink:VkPhysicalDeviceFeatures which is covered by ename:VK_ERROR_FEATURE_NOT_PRESENT already (public issue 496). * Clarify valid usage of pname:pQueueFamilyIndices in slink:VkBufferCreateInfo, slink:VkImageCreateInfo, and slink:VkSwapchainCreateInfoKHR (public issue 501). * Document that dependencies of enabled extensions must also be enabled in the <<extended-functionality-extensions-dependencies, Extension Dependencies>> section (public issue 507). Internal Issues: * Change slink:VkMappedMemoryRange valid usage to allow pname:offset + pname:size == size of the allocation. Also, if ename:VK_WHOLE_SIZE is used, require the end of the mapping to be aligned to a multiple of pname:nonCoherentAtomSize (internal issue 611). * Add issue to `VK_KHR_win32_surface` about reusing window objects from a different graphics API or Vulkan ICD (internal issue 639). * Require locations on user in/out in `GL_KHR_vulkan_glsl` (internal issue 783). * Added version info to the json validation output, and updated the schema to match (internal issue 838). * Restructure enumerated type descriptions separately from the command or structure they are used in, allowing better reference page generation (internal issue 841). * Re-sort extension appendices to be in alphabetical order within each author ID section. * Fix enum naming and clarify behavior for `VK_NVX_device_generated_commands` extension. New Extensions:
2017-06-05 03:48:43 +00:00
* pname:compareOp is a elink:VkCompareOp value specifying the comparison
function to apply to fetched data before filtering as described in the
<<textures-depth-compare-operation, Depth Compare Operation>> section.
Vulkan 1.0 branch 1.0 for release
2016-02-16 09:53:44 +00:00
* pname:minLod and pname:maxLod are the values used to clamp the computed
level-of-detail value, as described in the
<<textures-level-of-detail-operation, Level-of-Detail Operation>>
Change log for September 23, 2016 Vulkan 1.0.28 spec update: * Bump API patch number and header version number to 28 for this update. Github Issues: * Minor spelling and typography cleanup, add definitions of ename:VK_FALSE and ename:VK_TRUE as just what their names say (public issues 220, 318, 325, 365; internal issues 451, 496) * Clarify that the pname:maxDescriptorSet limits in the <<features-limits-required,Required Limits>> table are n * maxPerStage limit (where n=number of supported stages) (public issue 254). * Minor cleanup to <<boilerplate-platform-macros,Platform-Specific Macro Definitions>> appendix (public issue 314). * Add valid usage statement to slink:VkPipelineLayoutCreateInfo disallowing multiple push constant ranges for the same shader stage (public issue 340). * Clarify the elink:VkSharingMode description of what executing the "same" barriers means in case of ownership transfer (public issue 347). * Rename copyright.txt and add COPYING.md to try and reduce confusion about applicable copyrights (public issue 350). * Extend the table in the <<boilerplate-wsi-header, Window System-Specific Header Control>> section to describe the external headers included when each etext:VK_USE_PLATFORM_* macro is defined (public issue 376). Internal Issues: * Add "Revision History" to the PDF outputs following the table of contents, to match HTML outputs (internal issue 43). * Clarified that flink:vkMapMemory may fail due to virtual address space limitations (internal issue 346). * Add +refBody+ comment markup for ref page autoextraction when required (internal issue 400). * Document proper use of "mipmap" and "mip" in the style guide API naming rules, matching the spelling rules (internal issue 471). * Tweak the <<extensions,Layers and Extensions>> appendix to note that the Specification may be built with arbitrary combinations of extensions (internal issue 483). * Remove incorrect statement allowing slink:VkClearAttachment::pname:colorAttachment to be >= slink:VkSubpassDescription::pname:colorAttachmentCount (internal issue 488). * The <<features-limits-viewportboundsrange,viewportBoundsRange>> is expressed in terms of the pname:maxViewportDimensions but this is actually two values. Clarify that it's based on the larger of the two (if they differ) (internal issue 499). Other Issues: * Reflowed text of the entire spec using the 'reflow' Makefile gater, to (hopefully) reduce future internal git churn as edits are made and extensions added in return for one-time pain. This has no perceptible change on the spec outputs but considerable changes on the asciidoc source (internal issue 367).
2016-09-24 07:58:11 +00:00
section.
pname:maxLod must: be greater than or equal to pname:minLod.
Change log for June 4, 2017 Vulkan 1.0.51 spec update: * Bump API patch number and header version number to 51 for this update. Github Issues: * Add Valid Usage statement to flink:vkCmdResolveImage to require that source and destination image formats match (public issue 492). * Specify that a code:char* parameter must: be a valid null-terminated string in the <<fundamentals-implicit-validity, implicit valid usage>> section (public issue 494). * Removed unnecessary VU for slink:VkPhysicalDeviceFeatures which is covered by ename:VK_ERROR_FEATURE_NOT_PRESENT already (public issue 496). * Clarify valid usage of pname:pQueueFamilyIndices in slink:VkBufferCreateInfo, slink:VkImageCreateInfo, and slink:VkSwapchainCreateInfoKHR (public issue 501). * Document that dependencies of enabled extensions must also be enabled in the <<extended-functionality-extensions-dependencies, Extension Dependencies>> section (public issue 507). Internal Issues: * Change slink:VkMappedMemoryRange valid usage to allow pname:offset + pname:size == size of the allocation. Also, if ename:VK_WHOLE_SIZE is used, require the end of the mapping to be aligned to a multiple of pname:nonCoherentAtomSize (internal issue 611). * Add issue to `VK_KHR_win32_surface` about reusing window objects from a different graphics API or Vulkan ICD (internal issue 639). * Require locations on user in/out in `GL_KHR_vulkan_glsl` (internal issue 783). * Added version info to the json validation output, and updated the schema to match (internal issue 838). * Restructure enumerated type descriptions separately from the command or structure they are used in, allowing better reference page generation (internal issue 841). * Re-sort extension appendices to be in alphabetical order within each author ID section. * Fix enum naming and clarify behavior for `VK_NVX_device_generated_commands` extension. New Extensions:
2017-06-05 03:48:43 +00:00
* pname:borderColor is a elink:VkBorderColor value specifying the
predefined border color to use.
Vulkan 1.0 branch 1.0 for release
2016-02-16 09:53:44 +00:00
* [[samplers-unnormalizedCoordinates]] pname:unnormalizedCoordinates
controls whether to use unnormalized or normalized texel coordinates to
Change log for September 23, 2016 Vulkan 1.0.28 spec update: * Bump API patch number and header version number to 28 for this update. Github Issues: * Minor spelling and typography cleanup, add definitions of ename:VK_FALSE and ename:VK_TRUE as just what their names say (public issues 220, 318, 325, 365; internal issues 451, 496) * Clarify that the pname:maxDescriptorSet limits in the <<features-limits-required,Required Limits>> table are n * maxPerStage limit (where n=number of supported stages) (public issue 254). * Minor cleanup to <<boilerplate-platform-macros,Platform-Specific Macro Definitions>> appendix (public issue 314). * Add valid usage statement to slink:VkPipelineLayoutCreateInfo disallowing multiple push constant ranges for the same shader stage (public issue 340). * Clarify the elink:VkSharingMode description of what executing the "same" barriers means in case of ownership transfer (public issue 347). * Rename copyright.txt and add COPYING.md to try and reduce confusion about applicable copyrights (public issue 350). * Extend the table in the <<boilerplate-wsi-header, Window System-Specific Header Control>> section to describe the external headers included when each etext:VK_USE_PLATFORM_* macro is defined (public issue 376). Internal Issues: * Add "Revision History" to the PDF outputs following the table of contents, to match HTML outputs (internal issue 43). * Clarified that flink:vkMapMemory may fail due to virtual address space limitations (internal issue 346). * Add +refBody+ comment markup for ref page autoextraction when required (internal issue 400). * Document proper use of "mipmap" and "mip" in the style guide API naming rules, matching the spelling rules (internal issue 471). * Tweak the <<extensions,Layers and Extensions>> appendix to note that the Specification may be built with arbitrary combinations of extensions (internal issue 483). * Remove incorrect statement allowing slink:VkClearAttachment::pname:colorAttachment to be >= slink:VkSubpassDescription::pname:colorAttachmentCount (internal issue 488). * The <<features-limits-viewportboundsrange,viewportBoundsRange>> is expressed in terms of the pname:maxViewportDimensions but this is actually two values. Clarify that it's based on the larger of the two (if they differ) (internal issue 499). Other Issues: * Reflowed text of the entire spec using the 'reflow' Makefile gater, to (hopefully) reduce future internal git churn as edits are made and extensions added in return for one-time pain. This has no perceptible change on the spec outputs but considerable changes on the asciidoc source (internal issue 367).
2016-09-24 07:58:11 +00:00
address texels of the image.
When set to ename:VK_TRUE, the range of the image coordinates used to
lookup the texel is in the range of zero to the image dimensions for x,
y and z.
When set to ename:VK_FALSE the range of image coordinates is zero to
one.
When pname:unnormalizedCoordinates is ename:VK_TRUE, samplers have the
Vulkan 1.0 branch 1.0 for release
2016-02-16 09:53:44 +00:00
following requirements:
** pname:minFilter and pname:magFilter must: be equal.
** pname:mipmapMode must: be ename:VK_SAMPLER_MIPMAP_MODE_NEAREST.
** pname:minLod and pname:maxLod must: be zero.
Change log for September 23, 2016 Vulkan 1.0.28 spec update: * Bump API patch number and header version number to 28 for this update. Github Issues: * Minor spelling and typography cleanup, add definitions of ename:VK_FALSE and ename:VK_TRUE as just what their names say (public issues 220, 318, 325, 365; internal issues 451, 496) * Clarify that the pname:maxDescriptorSet limits in the <<features-limits-required,Required Limits>> table are n * maxPerStage limit (where n=number of supported stages) (public issue 254). * Minor cleanup to <<boilerplate-platform-macros,Platform-Specific Macro Definitions>> appendix (public issue 314). * Add valid usage statement to slink:VkPipelineLayoutCreateInfo disallowing multiple push constant ranges for the same shader stage (public issue 340). * Clarify the elink:VkSharingMode description of what executing the "same" barriers means in case of ownership transfer (public issue 347). * Rename copyright.txt and add COPYING.md to try and reduce confusion about applicable copyrights (public issue 350). * Extend the table in the <<boilerplate-wsi-header, Window System-Specific Header Control>> section to describe the external headers included when each etext:VK_USE_PLATFORM_* macro is defined (public issue 376). Internal Issues: * Add "Revision History" to the PDF outputs following the table of contents, to match HTML outputs (internal issue 43). * Clarified that flink:vkMapMemory may fail due to virtual address space limitations (internal issue 346). * Add +refBody+ comment markup for ref page autoextraction when required (internal issue 400). * Document proper use of "mipmap" and "mip" in the style guide API naming rules, matching the spelling rules (internal issue 471). * Tweak the <<extensions,Layers and Extensions>> appendix to note that the Specification may be built with arbitrary combinations of extensions (internal issue 483). * Remove incorrect statement allowing slink:VkClearAttachment::pname:colorAttachment to be >= slink:VkSubpassDescription::pname:colorAttachmentCount (internal issue 488). * The <<features-limits-viewportboundsrange,viewportBoundsRange>> is expressed in terms of the pname:maxViewportDimensions but this is actually two values. Clarify that it's based on the larger of the two (if they differ) (internal issue 499). Other Issues: * Reflowed text of the entire spec using the 'reflow' Makefile gater, to (hopefully) reduce future internal git churn as edits are made and extensions added in return for one-time pain. This has no perceptible change on the spec outputs but considerable changes on the asciidoc source (internal issue 367).
2016-09-24 07:58:11 +00:00
** pname:addressModeU and pname:addressModeV must: each be either
ename:VK_SAMPLER_ADDRESS_MODE_CLAMP_TO_EDGE or
Vulkan 1.0 branch 1.0 for release
2016-02-16 09:53:44 +00:00
ename:VK_SAMPLER_ADDRESS_MODE_CLAMP_TO_BORDER.
** pname:anisotropyEnable must: be ename:VK_FALSE.
** pname:compareEnable must: be ename:VK_FALSE.
* When pname:unnormalizedCoordinates is ename:VK_TRUE, images the sampler
is used with in the shader have the following requirements:
** The pname:viewType must: be either ename:VK_IMAGE_VIEW_TYPE_1D or
ename:VK_IMAGE_VIEW_TYPE_2D.
** The image view must: have a single layer and a single mip level.
* When pname:unnormalizedCoordinates is ename:VK_TRUE, image built-in
functions in the shader that use the sampler have the following
requirements:
Change log for September 6, 2016 Vulkan 1.0.26 spec update: * Bump API patch number and header version number to 26 for this update. Github Issues: * Bring sample code in the +VK_KHR_surface+ and +VK_KHR_swapchain+ extension summary appendices up to date, and note they will be replaced with pointers to the LunarG SDK examples in the future (public issue 279). * Add a new <<fundamentals-commandsyntax-results-lifetime,Lifetime of Retrieved Results>> section specifying that ftext:vkGet* and ftext:VkEnumerate* results are invariant unless otherwise specified, and specify behavior for individual commands which are not invariant (public issue 280). * Remove conflicting definition of slink:VkDisplayPlaneCapabilitiesKHR::pname:maxSrcPosition and clean up language of the remaining definition (public issue 351). * Fix many minor spelling errors and add rules to the style guide to prevent recurrences (public issue 352). Internal Issues: * Remove redundant descriptions of the etext:VK_USE_PLATFORM_* macros from the <<wsi,Window System Integration>> chapter in favor of the description in the <<boilerplate-wsi-header,Window System-Specific Header Control>> appendix (internal issue 6). * Replace misleading 'can: be destroyed when not X' with more correct 'must: not be destroyed while X' in the <<fundamentals-objectmodel-lifetime,Object Lifetime>> section. Disallow destroying a pipeline layout while a command buffer using it is recording (internal issue 241). * Clarify that ename:VK_IMAGE_USAGE_TRANSIENT_ATTACHMENT_BIT is valid for all images used as attachments in elink:VkImageUsageFlagBits and the slink:VkImageLayout validity language (internal issue 320). * Note that <<extended-functionality-layers,Layers>> may wrap object handles, but that this is a generally discouraged. A link to additional information in the documentation for layer authors is provided (issue 398) * Replace the mustnot: and shouldnot: macros with equivalent must: not and should: not to get rid of non-English words while still highlighting normative language (internal issue 407). * Disallow creating multisampled images with ename:VK_IMAGE_CREATE_CUBE_COMPATIBLE_BIT in the slink:VkImageLayout validity language and the <<features-supported-sample-counts,Supported Sample Counts>> section (internal issue 445). * Fix typo so that flink:vkCmdDrawIndexedIndirect is defined in terms of flink:vkCmdDrawIndexed rather than flink:vkCmdDrawIndirect (internal issue 446). * Reorganize the per-extension information sections to all be in the <<extensions,Layers & Extensions>> appendix. Also fix a typo in +VK_IMG_filter_cubic+ which incorrectly identified it as a +KHR+ extension (internal issue 461). Other Issues: * Use asciidoc markup instead of latexmath to simplify diagrams in the <<features-formats-non-packed,byte mapping tables>> for color formats. * Fix a markup problem with the wildcarded enumerant names in a NOTE in the <<textures-texel-replacement,Texel Replacement>> section. * Fix missing attributes in the XML interface for elink:VkExternalMemoryHandleTypeFlagBitsNV and elink:VkExternalMemoryFeatureFlagBitsNV (KhronosGroup/Vulkan-Hpp issue #25) * Cleanup reference page builds so only core pages are built for releases.
2016-09-06 13:17:27 +00:00
** The functions must: not use projection.
** The functions must: not use offsets.
Vulkan 1.0 branch 1.0 for release
2016-02-16 09:53:44 +00:00
[NOTE]
Change log for April 29, 2016 Vulkan 1.0.12 spec update: * Bump API patch number and header version number to 12 for this update. Github Issues: * Change valid usage statements intended to be "sub-points" to be actual sub-points (public issue 66). * Replace double negation in description of slink:VkRenderPassBeginInfo::pname:pClearValues (based on public merge 142). * Cleanup minor typos in spec, ref pages and XML, including those proposed in public pull requests 144, 150, 151, 167, 168, 181, and 186. * Use *strict subset* in describing the partial order of memory property types for slink:VkMemoryType, and update the style guide accordingly (public issue 190). * Fix various "a image" -> "an image" typos (public issue 191). * Note in the <<fundamentals-validusage,Valid Usage>> and <<extensions-interactions,Extension Interactions>> sections that structures defined by extensions which may be passed in structure chains using the ptext:pNext member must: include initial ptext:sType and ptext:pNext members (public issue 192). Internal Issues: * Remove duplicate language from the description of the pname:fence parameter to flink:vkQueueSubmit and improve validity language (internal issue 91). * Added documentation for "optional" attribute to XML readme.tex/pdf (internal issue 149). * Clarify the host-side data validity rules and behavior of flink:vkFlushMappedMemoryRanges and flink:vkInvalidateMappedMemoryRanges (internal issue 266). Other Commits: * Added clarification to flink:vkCmdFillBuffer regarding the use of ename:VK_WHOLE_SIZE. * Fixed and documented implementation of "validextensionstructs" attribute. in XML processing scripts and readme.tex/pdf. * Add missing validity statements to flink:vkResetEvent and flink:vkCmdResetEvent. * Fix validity for the ename:VK_FORMAT_FEATURE_SAMPLED_IMAGE_FILTER_LINEAR_BIT flag. Correct all the draw/dispatch commands to mention optimally tiled images as well as linear tiled images, and say image VIEWS instead of images. Add validity statement to flink:vkCmdBlitImage * Replace the {apiname} macro with hardcoded "Vulkan", now that we've committed to that name. * Add the VK_AMD_rasterization_order extension to vk.xml.
2016-04-29 12:53:46 +00:00
.Mapping of OpenGL to Vulkan filter modes
Vulkan 1.0 branch 1.0 for release
2016-02-16 09:53:44 +00:00
==================
pname:magFilter values of ename:VK_FILTER_NEAREST and ename:VK_FILTER_LINEAR
directly correspond to code:GL_NEAREST and code:GL_LINEAR magnification
Change log for September 23, 2016 Vulkan 1.0.28 spec update: * Bump API patch number and header version number to 28 for this update. Github Issues: * Minor spelling and typography cleanup, add definitions of ename:VK_FALSE and ename:VK_TRUE as just what their names say (public issues 220, 318, 325, 365; internal issues 451, 496) * Clarify that the pname:maxDescriptorSet limits in the <<features-limits-required,Required Limits>> table are n * maxPerStage limit (where n=number of supported stages) (public issue 254). * Minor cleanup to <<boilerplate-platform-macros,Platform-Specific Macro Definitions>> appendix (public issue 314). * Add valid usage statement to slink:VkPipelineLayoutCreateInfo disallowing multiple push constant ranges for the same shader stage (public issue 340). * Clarify the elink:VkSharingMode description of what executing the "same" barriers means in case of ownership transfer (public issue 347). * Rename copyright.txt and add COPYING.md to try and reduce confusion about applicable copyrights (public issue 350). * Extend the table in the <<boilerplate-wsi-header, Window System-Specific Header Control>> section to describe the external headers included when each etext:VK_USE_PLATFORM_* macro is defined (public issue 376). Internal Issues: * Add "Revision History" to the PDF outputs following the table of contents, to match HTML outputs (internal issue 43). * Clarified that flink:vkMapMemory may fail due to virtual address space limitations (internal issue 346). * Add +refBody+ comment markup for ref page autoextraction when required (internal issue 400). * Document proper use of "mipmap" and "mip" in the style guide API naming rules, matching the spelling rules (internal issue 471). * Tweak the <<extensions,Layers and Extensions>> appendix to note that the Specification may be built with arbitrary combinations of extensions (internal issue 483). * Remove incorrect statement allowing slink:VkClearAttachment::pname:colorAttachment to be >= slink:VkSubpassDescription::pname:colorAttachmentCount (internal issue 488). * The <<features-limits-viewportboundsrange,viewportBoundsRange>> is expressed in terms of the pname:maxViewportDimensions but this is actually two values. Clarify that it's based on the larger of the two (if they differ) (internal issue 499). Other Issues: * Reflowed text of the entire spec using the 'reflow' Makefile gater, to (hopefully) reduce future internal git churn as edits are made and extensions added in return for one-time pain. This has no perceptible change on the spec outputs but considerable changes on the asciidoc source (internal issue 367).
2016-09-24 07:58:11 +00:00
filters.
pname:minFilter and pname:mipmapMode combine to correspond to the similarly
named OpenGL minification filter of code:GL_minFilter_MIPMAP_mipmapMode
Change log for September 30, 2016 Vulkan 1.0.29 spec update: * Bump API patch number and header version number to 29 for this update. Github Issues: * Remove redundant constraint on slink:VkCommandBufferInheritanceInfo::pname:queryFlags (public issue 224). * Fix typo and remove link in Note in the <<extended-functionality-instance-extensions-and-devices, Instance Extensions and Device Extensions>> section (public issue 359). * Fix erroneous validation statement for the pname:layout member of slink:VkComputePipelineCreateInfo (public issue 362). Internal Issues: * Restore long figure captions using asciidoc sidebar blocks, due to restrictions of asciidoc syntax (internal issue 101). * Replace most latexmath equations with comparable markup in straight asciidoc, which significantly improves time required to fully load and process the HTML forms of the Specification. There are known minor font and alignment inconsistencies with MathJax and PDF rendering of latexmath equations. Please do not file github issues about these. We are aware of the inconsistencies and will make refinements over time, while the performance improvements are compelling in at least some major browsers (internal issue 313). * Move handcoded validity statements from +vk.xml+ into the Specification body, easing work in the single-branch model. Specify the distinction between these explicit statements, and the implicit validity statements inferred from vk.xml. Validity statements now appear in two blocks for each command and structure - handcoded "Valid Usage" and the implicit "Valid Usage (Implicit)" (internal issue 392). * Add the +returnedonly="false"+ attribute to WSI output structures, removing incorrectly generated implicit validity statements for slink:VkDisplayPropertiesKHR, slink:VkDisplayPlanePropertiesKHR, slink:VkDisplayModePropertiesKHR, slink:VkDisplayPlaneCapabilitiesKHR, slink:VkSurfaceCapabilitiesKHR, and slink:VkSurfaceFormatKHR structures (internal issue 486). * Update slink:VkImageLayout to require the ename:VK_IMAGE_USAGE_SAMPLED_BIT be set for sampled depth/stencil images (internal issue 487). * Use an explicit format specifier string for the date command invocation in the +Makefile+ instead of the shorthand -R option, which doesn't work on BSD and MaxOS X date commands (internal issue 500). Other Issues: * Use the terms ``allocation scope'' and ``extension scope'' instead of just ``scope'', and add them to the glossary.
2016-10-01 04:13:37 +00:00
(e.g. pname:minFilter of ename:VK_FILTER_LINEAR and pname:mipmapMode of
Vulkan 1.0 branch 1.0 for release
2016-02-16 09:53:44 +00:00
ename:VK_SAMPLER_MIPMAP_MODE_NEAREST correspond to
code:GL_LINEAR_MIPMAP_NEAREST).
Change log for April 29, 2016 Vulkan 1.0.12 spec update: * Bump API patch number and header version number to 12 for this update. Github Issues: * Change valid usage statements intended to be "sub-points" to be actual sub-points (public issue 66). * Replace double negation in description of slink:VkRenderPassBeginInfo::pname:pClearValues (based on public merge 142). * Cleanup minor typos in spec, ref pages and XML, including those proposed in public pull requests 144, 150, 151, 167, 168, 181, and 186. * Use *strict subset* in describing the partial order of memory property types for slink:VkMemoryType, and update the style guide accordingly (public issue 190). * Fix various "a image" -> "an image" typos (public issue 191). * Note in the <<fundamentals-validusage,Valid Usage>> and <<extensions-interactions,Extension Interactions>> sections that structures defined by extensions which may be passed in structure chains using the ptext:pNext member must: include initial ptext:sType and ptext:pNext members (public issue 192). Internal Issues: * Remove duplicate language from the description of the pname:fence parameter to flink:vkQueueSubmit and improve validity language (internal issue 91). * Added documentation for "optional" attribute to XML readme.tex/pdf (internal issue 149). * Clarify the host-side data validity rules and behavior of flink:vkFlushMappedMemoryRanges and flink:vkInvalidateMappedMemoryRanges (internal issue 266). Other Commits: * Added clarification to flink:vkCmdFillBuffer regarding the use of ename:VK_WHOLE_SIZE. * Fixed and documented implementation of "validextensionstructs" attribute. in XML processing scripts and readme.tex/pdf. * Add missing validity statements to flink:vkResetEvent and flink:vkCmdResetEvent. * Fix validity for the ename:VK_FORMAT_FEATURE_SAMPLED_IMAGE_FILTER_LINEAR_BIT flag. Correct all the draw/dispatch commands to mention optimally tiled images as well as linear tiled images, and say image VIEWS instead of images. Add validity statement to flink:vkCmdBlitImage * Replace the {apiname} macro with hardcoded "Vulkan", now that we've committed to that name. * Add the VK_AMD_rasterization_order extension to vk.xml.
2016-04-29 12:53:46 +00:00
There are no Vulkan filter modes that directly correspond to OpenGL
Change log for April 22, 2016 Vulkan 1.0.11 spec update: * Bump API patch number and header version number to 11 for this update. Github Issues: * Clarify the WSI extension language by switching from the fuzzier "ownership" language to more-consistent "acquire" language (public issue 117). * Clarify that memory barriers apply to all commands in the dependency chains in the flink:vkGetRenderAreaGranularity command and the <<synchronization-execution-and-memory-dependencies,Execution And Memory Dependencies>> section (public issue 132). * Clarify that a queue family is a set of queues in the <<fundamentals-execmodel,Execution Model>> section (public issue 166). * Removed requirement from valid usage language that VkPresentInfoKHR::waitSemaphoreCount must be greater than 0 (public issue 171). * Fix broken internal links, describe structures consistently, use consistent style for SPIR-V codewords, and tag normative terms that were missing asciidoc tags (public issue 183 and ancillary markup/normative language fixes). * Fix typos for slink:VkPhysicalDeviceLimits member names in slink:VkImageCreateInfo validity language (public issue 184). Internal Issues: * Document that the requested patch version number specified as part of slink:VkApplicationInfo::pname:apiVersion is ignored when creating an instance (internal issue 176). * Clarify handling of extension structs in the <<fundamentals-validusageValid Usage>> section (internal issue 254). * Update required slink:VkImageFormatProperties::pname:maxMipLevels to be limited to the maximum allowed mipmap pyramid size corresponding to the actual maximum supported size for the format (internal issue 256). * Modify the <<features-extentperimagetype,Allowed Extent Values Based On Image Type>> section so the allowed maximum extent is the maximum image dimension supported for each dimension of the type of texture being queried (internal issue 257). * Clarify in the <<spirvenv-module-validation,Validation Rules within a Module>> section that at least one of the code:LocalSize execution mode or code:WorkgroupSize decoration is required for each compute shader entry point in a shader module (internal issue 279). * Add validity rules for formats in flink:vkCmdClearColorImage and flink:vkCmdClearDepthStencilImage (internal issue 283). * Clarify that slink:VkImageFormatProperties::pname:maxResourceSize is an upper bound, and that it may not be possible to create an image anywhere near that size (internal issue 284). Other Commits: * Fix various minor markup errors reported by validation scripts. * Change copyright from Khronos Free Use License to Apache 2.0 license on relevant script/XML/header files. This does not affect the specification source copyright.
2016-04-21 08:08:38 +00:00
minification filters of code:GL_LINEAR or code:GL_NEAREST, but they can: be
Vulkan 1.0 branch 1.0 for release
2016-02-16 09:53:44 +00:00
emulated using ename:VK_SAMPLER_MIPMAP_MODE_NEAREST, pname:minLod = 0, and
pname:maxLod = 0.25, and using pname:minFilter = ename:VK_FILTER_LINEAR or
pname:minFilter = ename:VK_FILTER_NEAREST, respectively.
Note that using a pname:maxLod of zero would cause
<<textures-texel-filtering,magnification>> to always be performed, and the
Change log for September 23, 2016 Vulkan 1.0.28 spec update: * Bump API patch number and header version number to 28 for this update. Github Issues: * Minor spelling and typography cleanup, add definitions of ename:VK_FALSE and ename:VK_TRUE as just what their names say (public issues 220, 318, 325, 365; internal issues 451, 496) * Clarify that the pname:maxDescriptorSet limits in the <<features-limits-required,Required Limits>> table are n * maxPerStage limit (where n=number of supported stages) (public issue 254). * Minor cleanup to <<boilerplate-platform-macros,Platform-Specific Macro Definitions>> appendix (public issue 314). * Add valid usage statement to slink:VkPipelineLayoutCreateInfo disallowing multiple push constant ranges for the same shader stage (public issue 340). * Clarify the elink:VkSharingMode description of what executing the "same" barriers means in case of ownership transfer (public issue 347). * Rename copyright.txt and add COPYING.md to try and reduce confusion about applicable copyrights (public issue 350). * Extend the table in the <<boilerplate-wsi-header, Window System-Specific Header Control>> section to describe the external headers included when each etext:VK_USE_PLATFORM_* macro is defined (public issue 376). Internal Issues: * Add "Revision History" to the PDF outputs following the table of contents, to match HTML outputs (internal issue 43). * Clarified that flink:vkMapMemory may fail due to virtual address space limitations (internal issue 346). * Add +refBody+ comment markup for ref page autoextraction when required (internal issue 400). * Document proper use of "mipmap" and "mip" in the style guide API naming rules, matching the spelling rules (internal issue 471). * Tweak the <<extensions,Layers and Extensions>> appendix to note that the Specification may be built with arbitrary combinations of extensions (internal issue 483). * Remove incorrect statement allowing slink:VkClearAttachment::pname:colorAttachment to be >= slink:VkSubpassDescription::pname:colorAttachmentCount (internal issue 488). * The <<features-limits-viewportboundsrange,viewportBoundsRange>> is expressed in terms of the pname:maxViewportDimensions but this is actually two values. Clarify that it's based on the larger of the two (if they differ) (internal issue 499). Other Issues: * Reflowed text of the entire spec using the 'reflow' Makefile gater, to (hopefully) reduce future internal git churn as edits are made and extensions added in return for one-time pain. This has no perceptible change on the spec outputs but considerable changes on the asciidoc source (internal issue 367).
2016-09-24 07:58:11 +00:00
pname:magFilter to always be used.
This is valid, just not an exact match for OpenGL behavior.
Change log for September 30, 2016 Vulkan 1.0.29 spec update: * Bump API patch number and header version number to 29 for this update. Github Issues: * Remove redundant constraint on slink:VkCommandBufferInheritanceInfo::pname:queryFlags (public issue 224). * Fix typo and remove link in Note in the <<extended-functionality-instance-extensions-and-devices, Instance Extensions and Device Extensions>> section (public issue 359). * Fix erroneous validation statement for the pname:layout member of slink:VkComputePipelineCreateInfo (public issue 362). Internal Issues: * Restore long figure captions using asciidoc sidebar blocks, due to restrictions of asciidoc syntax (internal issue 101). * Replace most latexmath equations with comparable markup in straight asciidoc, which significantly improves time required to fully load and process the HTML forms of the Specification. There are known minor font and alignment inconsistencies with MathJax and PDF rendering of latexmath equations. Please do not file github issues about these. We are aware of the inconsistencies and will make refinements over time, while the performance improvements are compelling in at least some major browsers (internal issue 313). * Move handcoded validity statements from +vk.xml+ into the Specification body, easing work in the single-branch model. Specify the distinction between these explicit statements, and the implicit validity statements inferred from vk.xml. Validity statements now appear in two blocks for each command and structure - handcoded "Valid Usage" and the implicit "Valid Usage (Implicit)" (internal issue 392). * Add the +returnedonly="false"+ attribute to WSI output structures, removing incorrectly generated implicit validity statements for slink:VkDisplayPropertiesKHR, slink:VkDisplayPlanePropertiesKHR, slink:VkDisplayModePropertiesKHR, slink:VkDisplayPlaneCapabilitiesKHR, slink:VkSurfaceCapabilitiesKHR, and slink:VkSurfaceFormatKHR structures (internal issue 486). * Update slink:VkImageLayout to require the ename:VK_IMAGE_USAGE_SAMPLED_BIT be set for sampled depth/stencil images (internal issue 487). * Use an explicit format specifier string for the date command invocation in the +Makefile+ instead of the shorthand -R option, which doesn't work on BSD and MaxOS X date commands (internal issue 500). Other Issues: * Use the terms ``allocation scope'' and ``extension scope'' instead of just ``scope'', and add them to the glossary.
2016-10-01 04:13:37 +00:00
Clamping the maximum LOD to 0.25 allows the [eq]#{lambda}# value to be
non-zero and minification to be performed, while still always rounding down
to the base level.
Change log for September 23, 2016 Vulkan 1.0.28 spec update: * Bump API patch number and header version number to 28 for this update. Github Issues: * Minor spelling and typography cleanup, add definitions of ename:VK_FALSE and ename:VK_TRUE as just what their names say (public issues 220, 318, 325, 365; internal issues 451, 496) * Clarify that the pname:maxDescriptorSet limits in the <<features-limits-required,Required Limits>> table are n * maxPerStage limit (where n=number of supported stages) (public issue 254). * Minor cleanup to <<boilerplate-platform-macros,Platform-Specific Macro Definitions>> appendix (public issue 314). * Add valid usage statement to slink:VkPipelineLayoutCreateInfo disallowing multiple push constant ranges for the same shader stage (public issue 340). * Clarify the elink:VkSharingMode description of what executing the "same" barriers means in case of ownership transfer (public issue 347). * Rename copyright.txt and add COPYING.md to try and reduce confusion about applicable copyrights (public issue 350). * Extend the table in the <<boilerplate-wsi-header, Window System-Specific Header Control>> section to describe the external headers included when each etext:VK_USE_PLATFORM_* macro is defined (public issue 376). Internal Issues: * Add "Revision History" to the PDF outputs following the table of contents, to match HTML outputs (internal issue 43). * Clarified that flink:vkMapMemory may fail due to virtual address space limitations (internal issue 346). * Add +refBody+ comment markup for ref page autoextraction when required (internal issue 400). * Document proper use of "mipmap" and "mip" in the style guide API naming rules, matching the spelling rules (internal issue 471). * Tweak the <<extensions,Layers and Extensions>> appendix to note that the Specification may be built with arbitrary combinations of extensions (internal issue 483). * Remove incorrect statement allowing slink:VkClearAttachment::pname:colorAttachment to be >= slink:VkSubpassDescription::pname:colorAttachmentCount (internal issue 488). * The <<features-limits-viewportboundsrange,viewportBoundsRange>> is expressed in terms of the pname:maxViewportDimensions but this is actually two values. Clarify that it's based on the larger of the two (if they differ) (internal issue 499). Other Issues: * Reflowed text of the entire spec using the 'reflow' Makefile gater, to (hopefully) reduce future internal git churn as edits are made and extensions added in return for one-time pain. This has no perceptible change on the spec outputs but considerable changes on the asciidoc source (internal issue 367).
2016-09-24 07:58:11 +00:00
If the pname:minFilter and pname:magFilter are equal, then using a
pname:maxLod of zero also works.
Vulkan 1.0 branch 1.0 for release
2016-02-16 09:53:44 +00:00
==================
The maximum number of sampler objects which can: be simultaneously created
on a device is implementation-dependent and specified by the
<<features-limits-maxSamplerAllocationCount,pname:maxSamplerAllocationCount>>
Change log for June 4, 2017 Vulkan 1.0.51 spec update: * Bump API patch number and header version number to 51 for this update. Github Issues: * Add Valid Usage statement to flink:vkCmdResolveImage to require that source and destination image formats match (public issue 492). * Specify that a code:char* parameter must: be a valid null-terminated string in the <<fundamentals-implicit-validity, implicit valid usage>> section (public issue 494). * Removed unnecessary VU for slink:VkPhysicalDeviceFeatures which is covered by ename:VK_ERROR_FEATURE_NOT_PRESENT already (public issue 496). * Clarify valid usage of pname:pQueueFamilyIndices in slink:VkBufferCreateInfo, slink:VkImageCreateInfo, and slink:VkSwapchainCreateInfoKHR (public issue 501). * Document that dependencies of enabled extensions must also be enabled in the <<extended-functionality-extensions-dependencies, Extension Dependencies>> section (public issue 507). Internal Issues: * Change slink:VkMappedMemoryRange valid usage to allow pname:offset + pname:size == size of the allocation. Also, if ename:VK_WHOLE_SIZE is used, require the end of the mapping to be aligned to a multiple of pname:nonCoherentAtomSize (internal issue 611). * Add issue to `VK_KHR_win32_surface` about reusing window objects from a different graphics API or Vulkan ICD (internal issue 639). * Require locations on user in/out in `GL_KHR_vulkan_glsl` (internal issue 783). * Added version info to the json validation output, and updated the schema to match (internal issue 838). * Restructure enumerated type descriptions separately from the command or structure they are used in, allowing better reference page generation (internal issue 841). * Re-sort extension appendices to be in alphabetical order within each author ID section. * Fix enum naming and clarify behavior for `VK_NVX_device_generated_commands` extension. New Extensions:
2017-06-05 03:48:43 +00:00
member of the slink:VkPhysicalDeviceLimits structure.
Change log for September 23, 2016 Vulkan 1.0.28 spec update: * Bump API patch number and header version number to 28 for this update. Github Issues: * Minor spelling and typography cleanup, add definitions of ename:VK_FALSE and ename:VK_TRUE as just what their names say (public issues 220, 318, 325, 365; internal issues 451, 496) * Clarify that the pname:maxDescriptorSet limits in the <<features-limits-required,Required Limits>> table are n * maxPerStage limit (where n=number of supported stages) (public issue 254). * Minor cleanup to <<boilerplate-platform-macros,Platform-Specific Macro Definitions>> appendix (public issue 314). * Add valid usage statement to slink:VkPipelineLayoutCreateInfo disallowing multiple push constant ranges for the same shader stage (public issue 340). * Clarify the elink:VkSharingMode description of what executing the "same" barriers means in case of ownership transfer (public issue 347). * Rename copyright.txt and add COPYING.md to try and reduce confusion about applicable copyrights (public issue 350). * Extend the table in the <<boilerplate-wsi-header, Window System-Specific Header Control>> section to describe the external headers included when each etext:VK_USE_PLATFORM_* macro is defined (public issue 376). Internal Issues: * Add "Revision History" to the PDF outputs following the table of contents, to match HTML outputs (internal issue 43). * Clarified that flink:vkMapMemory may fail due to virtual address space limitations (internal issue 346). * Add +refBody+ comment markup for ref page autoextraction when required (internal issue 400). * Document proper use of "mipmap" and "mip" in the style guide API naming rules, matching the spelling rules (internal issue 471). * Tweak the <<extensions,Layers and Extensions>> appendix to note that the Specification may be built with arbitrary combinations of extensions (internal issue 483). * Remove incorrect statement allowing slink:VkClearAttachment::pname:colorAttachment to be >= slink:VkSubpassDescription::pname:colorAttachmentCount (internal issue 488). * The <<features-limits-viewportboundsrange,viewportBoundsRange>> is expressed in terms of the pname:maxViewportDimensions but this is actually two values. Clarify that it's based on the larger of the two (if they differ) (internal issue 499). Other Issues: * Reflowed text of the entire spec using the 'reflow' Makefile gater, to (hopefully) reduce future internal git churn as edits are made and extensions added in return for one-time pain. This has no perceptible change on the spec outputs but considerable changes on the asciidoc source (internal issue 367).
2016-09-24 07:58:11 +00:00
If pname:maxSamplerAllocationCount is exceeded, fname:vkCreateSampler will
Vulkan 1.0 branch 1.0 for release
2016-02-16 09:53:44 +00:00
return ename:VK_ERROR_TOO_MANY_OBJECTS.
Change log for June 4, 2017 Vulkan 1.0.51 spec update: * Bump API patch number and header version number to 51 for this update. Github Issues: * Add Valid Usage statement to flink:vkCmdResolveImage to require that source and destination image formats match (public issue 492). * Specify that a code:char* parameter must: be a valid null-terminated string in the <<fundamentals-implicit-validity, implicit valid usage>> section (public issue 494). * Removed unnecessary VU for slink:VkPhysicalDeviceFeatures which is covered by ename:VK_ERROR_FEATURE_NOT_PRESENT already (public issue 496). * Clarify valid usage of pname:pQueueFamilyIndices in slink:VkBufferCreateInfo, slink:VkImageCreateInfo, and slink:VkSwapchainCreateInfoKHR (public issue 501). * Document that dependencies of enabled extensions must also be enabled in the <<extended-functionality-extensions-dependencies, Extension Dependencies>> section (public issue 507). Internal Issues: * Change slink:VkMappedMemoryRange valid usage to allow pname:offset + pname:size == size of the allocation. Also, if ename:VK_WHOLE_SIZE is used, require the end of the mapping to be aligned to a multiple of pname:nonCoherentAtomSize (internal issue 611). * Add issue to `VK_KHR_win32_surface` about reusing window objects from a different graphics API or Vulkan ICD (internal issue 639). * Require locations on user in/out in `GL_KHR_vulkan_glsl` (internal issue 783). * Added version info to the json validation output, and updated the schema to match (internal issue 838). * Restructure enumerated type descriptions separately from the command or structure they are used in, allowing better reference page generation (internal issue 841). * Re-sort extension appendices to be in alphabetical order within each author ID section. * Fix enum naming and clarify behavior for `VK_NVX_device_generated_commands` extension. New Extensions:
2017-06-05 03:48:43 +00:00
Since slink:VkSampler is a non-dispatchable handle type, implementations
Change log for September 23, 2016 Vulkan 1.0.28 spec update: * Bump API patch number and header version number to 28 for this update. Github Issues: * Minor spelling and typography cleanup, add definitions of ename:VK_FALSE and ename:VK_TRUE as just what their names say (public issues 220, 318, 325, 365; internal issues 451, 496) * Clarify that the pname:maxDescriptorSet limits in the <<features-limits-required,Required Limits>> table are n * maxPerStage limit (where n=number of supported stages) (public issue 254). * Minor cleanup to <<boilerplate-platform-macros,Platform-Specific Macro Definitions>> appendix (public issue 314). * Add valid usage statement to slink:VkPipelineLayoutCreateInfo disallowing multiple push constant ranges for the same shader stage (public issue 340). * Clarify the elink:VkSharingMode description of what executing the "same" barriers means in case of ownership transfer (public issue 347). * Rename copyright.txt and add COPYING.md to try and reduce confusion about applicable copyrights (public issue 350). * Extend the table in the <<boilerplate-wsi-header, Window System-Specific Header Control>> section to describe the external headers included when each etext:VK_USE_PLATFORM_* macro is defined (public issue 376). Internal Issues: * Add "Revision History" to the PDF outputs following the table of contents, to match HTML outputs (internal issue 43). * Clarified that flink:vkMapMemory may fail due to virtual address space limitations (internal issue 346). * Add +refBody+ comment markup for ref page autoextraction when required (internal issue 400). * Document proper use of "mipmap" and "mip" in the style guide API naming rules, matching the spelling rules (internal issue 471). * Tweak the <<extensions,Layers and Extensions>> appendix to note that the Specification may be built with arbitrary combinations of extensions (internal issue 483). * Remove incorrect statement allowing slink:VkClearAttachment::pname:colorAttachment to be >= slink:VkSubpassDescription::pname:colorAttachmentCount (internal issue 488). * The <<features-limits-viewportboundsrange,viewportBoundsRange>> is expressed in terms of the pname:maxViewportDimensions but this is actually two values. Clarify that it's based on the larger of the two (if they differ) (internal issue 499). Other Issues: * Reflowed text of the entire spec using the 'reflow' Makefile gater, to (hopefully) reduce future internal git churn as edits are made and extensions added in return for one-time pain. This has no perceptible change on the spec outputs but considerable changes on the asciidoc source (internal issue 367).
2016-09-24 07:58:11 +00:00
may: return the same handle for sampler state vectors that are identical.
In such cases, all such objects would only count once against the
Vulkan 1.0 branch 1.0 for release
2016-02-16 09:53:44 +00:00
pname:maxSamplerAllocationCount limit.
Change log for September 30, 2016 Vulkan 1.0.29 spec update: * Bump API patch number and header version number to 29 for this update. Github Issues: * Remove redundant constraint on slink:VkCommandBufferInheritanceInfo::pname:queryFlags (public issue 224). * Fix typo and remove link in Note in the <<extended-functionality-instance-extensions-and-devices, Instance Extensions and Device Extensions>> section (public issue 359). * Fix erroneous validation statement for the pname:layout member of slink:VkComputePipelineCreateInfo (public issue 362). Internal Issues: * Restore long figure captions using asciidoc sidebar blocks, due to restrictions of asciidoc syntax (internal issue 101). * Replace most latexmath equations with comparable markup in straight asciidoc, which significantly improves time required to fully load and process the HTML forms of the Specification. There are known minor font and alignment inconsistencies with MathJax and PDF rendering of latexmath equations. Please do not file github issues about these. We are aware of the inconsistencies and will make refinements over time, while the performance improvements are compelling in at least some major browsers (internal issue 313). * Move handcoded validity statements from +vk.xml+ into the Specification body, easing work in the single-branch model. Specify the distinction between these explicit statements, and the implicit validity statements inferred from vk.xml. Validity statements now appear in two blocks for each command and structure - handcoded "Valid Usage" and the implicit "Valid Usage (Implicit)" (internal issue 392). * Add the +returnedonly="false"+ attribute to WSI output structures, removing incorrectly generated implicit validity statements for slink:VkDisplayPropertiesKHR, slink:VkDisplayPlanePropertiesKHR, slink:VkDisplayModePropertiesKHR, slink:VkDisplayPlaneCapabilitiesKHR, slink:VkSurfaceCapabilitiesKHR, and slink:VkSurfaceFormatKHR structures (internal issue 486). * Update slink:VkImageLayout to require the ename:VK_IMAGE_USAGE_SAMPLED_BIT be set for sampled depth/stencil images (internal issue 487). * Use an explicit format specifier string for the date command invocation in the +Makefile+ instead of the shorthand -R option, which doesn't work on BSD and MaxOS X date commands (internal issue 500). Other Issues: * Use the terms ``allocation scope'' and ``extension scope'' instead of just ``scope'', and add them to the glossary.
2016-10-01 04:13:37 +00:00
.Valid Usage
****
Change log for May 20, 2017 Vulkan 1.0.50 spec update: * Bump API patch number and header version number to 50 for this update. Github Issues: * Fix numerous minor issues with the VK_EXT_debug_report extension (public issues 478, 483, 486, 489, 490). Internal Issues: * Update flink:vkAllocateDescriptorSets to specify conditions under which to return ename:VK_ERROR_FRAGMENTED_POOL or ename:VK_ERROR_OUT_OF_POOL_MEMORY instead of out-of-host/out-of-device-memory, and improve the <<fundamentals-errorcodes, description of those errors (internal issue 654). * Add a NOTE documenting that flink:vkAcquireNextImageKHR can only signal a single semaphore, and how to deal with that when multiple physical devices in a logical device need to wait on it (internal issue 730). * Improve description of pname:pNext chains of slink:VkPhysicalDeviceImageFormatInfo2KHR and slink:VkImageFormatProperties2KHR (internal issue 814). * Clean up math markup issues in the <<textures, Image Operations>> chapter (internal issue 818). * Update validusage target to use more robust code for preprocessing, by making direct use of Asciidoctor's preprocessor. Added uniqueItems check to JSON vu schema and add clean_validusage target (internal issue 826). * Update style guide to prohibit writing non-self-contained (on a single bullet point) Valid Usage statements, and modify offending Valid Usage statements in the Specification to match, to assist with automatic extraction for the validation layers (internal issue 828). * Add ename:VK_VALIDATION_CHECK_SHADERS_EXT to elink:VkValidationCheckEXT of the `VK_EXT_validation_flags` extension, to selectively disable shader validation. * Remove duplicate valid usage statement for slink:VkImageMemoryBarrier. * Modify reflow.py script to place VUID tag anchors standalone on a line following their corresponding bullet point, and reflow the spec text accordingly (this had been pending since the initial tag deployment). New Extensions: * `VK_AMD_texture_gather_bias_lod`
2017-05-21 00:00:50 +00:00
* [[VUID-VkSamplerCreateInfo-mipLodBias-01069]]
The absolute value of pname:mipLodBias must: be less than or equal to
Change log for September 30, 2016 Vulkan 1.0.29 spec update: * Bump API patch number and header version number to 29 for this update. Github Issues: * Remove redundant constraint on slink:VkCommandBufferInheritanceInfo::pname:queryFlags (public issue 224). * Fix typo and remove link in Note in the <<extended-functionality-instance-extensions-and-devices, Instance Extensions and Device Extensions>> section (public issue 359). * Fix erroneous validation statement for the pname:layout member of slink:VkComputePipelineCreateInfo (public issue 362). Internal Issues: * Restore long figure captions using asciidoc sidebar blocks, due to restrictions of asciidoc syntax (internal issue 101). * Replace most latexmath equations with comparable markup in straight asciidoc, which significantly improves time required to fully load and process the HTML forms of the Specification. There are known minor font and alignment inconsistencies with MathJax and PDF rendering of latexmath equations. Please do not file github issues about these. We are aware of the inconsistencies and will make refinements over time, while the performance improvements are compelling in at least some major browsers (internal issue 313). * Move handcoded validity statements from +vk.xml+ into the Specification body, easing work in the single-branch model. Specify the distinction between these explicit statements, and the implicit validity statements inferred from vk.xml. Validity statements now appear in two blocks for each command and structure - handcoded "Valid Usage" and the implicit "Valid Usage (Implicit)" (internal issue 392). * Add the +returnedonly="false"+ attribute to WSI output structures, removing incorrectly generated implicit validity statements for slink:VkDisplayPropertiesKHR, slink:VkDisplayPlanePropertiesKHR, slink:VkDisplayModePropertiesKHR, slink:VkDisplayPlaneCapabilitiesKHR, slink:VkSurfaceCapabilitiesKHR, and slink:VkSurfaceFormatKHR structures (internal issue 486). * Update slink:VkImageLayout to require the ename:VK_IMAGE_USAGE_SAMPLED_BIT be set for sampled depth/stencil images (internal issue 487). * Use an explicit format specifier string for the date command invocation in the +Makefile+ instead of the shorthand -R option, which doesn't work on BSD and MaxOS X date commands (internal issue 500). Other Issues: * Use the terms ``allocation scope'' and ``extension scope'' instead of just ``scope'', and add them to the glossary.
2016-10-01 04:13:37 +00:00
sname:VkPhysicalDeviceLimits::pname:maxSamplerLodBias
Change log for May 20, 2017 Vulkan 1.0.50 spec update: * Bump API patch number and header version number to 50 for this update. Github Issues: * Fix numerous minor issues with the VK_EXT_debug_report extension (public issues 478, 483, 486, 489, 490). Internal Issues: * Update flink:vkAllocateDescriptorSets to specify conditions under which to return ename:VK_ERROR_FRAGMENTED_POOL or ename:VK_ERROR_OUT_OF_POOL_MEMORY instead of out-of-host/out-of-device-memory, and improve the <<fundamentals-errorcodes, description of those errors (internal issue 654). * Add a NOTE documenting that flink:vkAcquireNextImageKHR can only signal a single semaphore, and how to deal with that when multiple physical devices in a logical device need to wait on it (internal issue 730). * Improve description of pname:pNext chains of slink:VkPhysicalDeviceImageFormatInfo2KHR and slink:VkImageFormatProperties2KHR (internal issue 814). * Clean up math markup issues in the <<textures, Image Operations>> chapter (internal issue 818). * Update validusage target to use more robust code for preprocessing, by making direct use of Asciidoctor's preprocessor. Added uniqueItems check to JSON vu schema and add clean_validusage target (internal issue 826). * Update style guide to prohibit writing non-self-contained (on a single bullet point) Valid Usage statements, and modify offending Valid Usage statements in the Specification to match, to assist with automatic extraction for the validation layers (internal issue 828). * Add ename:VK_VALIDATION_CHECK_SHADERS_EXT to elink:VkValidationCheckEXT of the `VK_EXT_validation_flags` extension, to selectively disable shader validation. * Remove duplicate valid usage statement for slink:VkImageMemoryBarrier. * Modify reflow.py script to place VUID tag anchors standalone on a line following their corresponding bullet point, and reflow the spec text accordingly (this had been pending since the initial tag deployment). New Extensions: * `VK_AMD_texture_gather_bias_lod`
2017-05-21 00:00:50 +00:00
* [[VUID-VkSamplerCreateInfo-anisotropyEnable-01070]]
If the <<features-features-samplerAnisotropy,anisotropic sampling>>
Change log for September 30, 2016 Vulkan 1.0.29 spec update: * Bump API patch number and header version number to 29 for this update. Github Issues: * Remove redundant constraint on slink:VkCommandBufferInheritanceInfo::pname:queryFlags (public issue 224). * Fix typo and remove link in Note in the <<extended-functionality-instance-extensions-and-devices, Instance Extensions and Device Extensions>> section (public issue 359). * Fix erroneous validation statement for the pname:layout member of slink:VkComputePipelineCreateInfo (public issue 362). Internal Issues: * Restore long figure captions using asciidoc sidebar blocks, due to restrictions of asciidoc syntax (internal issue 101). * Replace most latexmath equations with comparable markup in straight asciidoc, which significantly improves time required to fully load and process the HTML forms of the Specification. There are known minor font and alignment inconsistencies with MathJax and PDF rendering of latexmath equations. Please do not file github issues about these. We are aware of the inconsistencies and will make refinements over time, while the performance improvements are compelling in at least some major browsers (internal issue 313). * Move handcoded validity statements from +vk.xml+ into the Specification body, easing work in the single-branch model. Specify the distinction between these explicit statements, and the implicit validity statements inferred from vk.xml. Validity statements now appear in two blocks for each command and structure - handcoded "Valid Usage" and the implicit "Valid Usage (Implicit)" (internal issue 392). * Add the +returnedonly="false"+ attribute to WSI output structures, removing incorrectly generated implicit validity statements for slink:VkDisplayPropertiesKHR, slink:VkDisplayPlanePropertiesKHR, slink:VkDisplayModePropertiesKHR, slink:VkDisplayPlaneCapabilitiesKHR, slink:VkSurfaceCapabilitiesKHR, and slink:VkSurfaceFormatKHR structures (internal issue 486). * Update slink:VkImageLayout to require the ename:VK_IMAGE_USAGE_SAMPLED_BIT be set for sampled depth/stencil images (internal issue 487). * Use an explicit format specifier string for the date command invocation in the +Makefile+ instead of the shorthand -R option, which doesn't work on BSD and MaxOS X date commands (internal issue 500). Other Issues: * Use the terms ``allocation scope'' and ``extension scope'' instead of just ``scope'', and add them to the glossary.
2016-10-01 04:13:37 +00:00
feature is not enabled, pname:anisotropyEnable must: be ename:VK_FALSE
Change log for May 20, 2017 Vulkan 1.0.50 spec update: * Bump API patch number and header version number to 50 for this update. Github Issues: * Fix numerous minor issues with the VK_EXT_debug_report extension (public issues 478, 483, 486, 489, 490). Internal Issues: * Update flink:vkAllocateDescriptorSets to specify conditions under which to return ename:VK_ERROR_FRAGMENTED_POOL or ename:VK_ERROR_OUT_OF_POOL_MEMORY instead of out-of-host/out-of-device-memory, and improve the <<fundamentals-errorcodes, description of those errors (internal issue 654). * Add a NOTE documenting that flink:vkAcquireNextImageKHR can only signal a single semaphore, and how to deal with that when multiple physical devices in a logical device need to wait on it (internal issue 730). * Improve description of pname:pNext chains of slink:VkPhysicalDeviceImageFormatInfo2KHR and slink:VkImageFormatProperties2KHR (internal issue 814). * Clean up math markup issues in the <<textures, Image Operations>> chapter (internal issue 818). * Update validusage target to use more robust code for preprocessing, by making direct use of Asciidoctor's preprocessor. Added uniqueItems check to JSON vu schema and add clean_validusage target (internal issue 826). * Update style guide to prohibit writing non-self-contained (on a single bullet point) Valid Usage statements, and modify offending Valid Usage statements in the Specification to match, to assist with automatic extraction for the validation layers (internal issue 828). * Add ename:VK_VALIDATION_CHECK_SHADERS_EXT to elink:VkValidationCheckEXT of the `VK_EXT_validation_flags` extension, to selectively disable shader validation. * Remove duplicate valid usage statement for slink:VkImageMemoryBarrier. * Modify reflow.py script to place VUID tag anchors standalone on a line following their corresponding bullet point, and reflow the spec text accordingly (this had been pending since the initial tag deployment). New Extensions: * `VK_AMD_texture_gather_bias_lod`
2017-05-21 00:00:50 +00:00
* [[VUID-VkSamplerCreateInfo-anisotropyEnable-01071]]
If pname:anisotropyEnable is ename:VK_TRUE, pname:maxAnisotropy must: be
Change log for September 30, 2016 Vulkan 1.0.29 spec update: * Bump API patch number and header version number to 29 for this update. Github Issues: * Remove redundant constraint on slink:VkCommandBufferInheritanceInfo::pname:queryFlags (public issue 224). * Fix typo and remove link in Note in the <<extended-functionality-instance-extensions-and-devices, Instance Extensions and Device Extensions>> section (public issue 359). * Fix erroneous validation statement for the pname:layout member of slink:VkComputePipelineCreateInfo (public issue 362). Internal Issues: * Restore long figure captions using asciidoc sidebar blocks, due to restrictions of asciidoc syntax (internal issue 101). * Replace most latexmath equations with comparable markup in straight asciidoc, which significantly improves time required to fully load and process the HTML forms of the Specification. There are known minor font and alignment inconsistencies with MathJax and PDF rendering of latexmath equations. Please do not file github issues about these. We are aware of the inconsistencies and will make refinements over time, while the performance improvements are compelling in at least some major browsers (internal issue 313). * Move handcoded validity statements from +vk.xml+ into the Specification body, easing work in the single-branch model. Specify the distinction between these explicit statements, and the implicit validity statements inferred from vk.xml. Validity statements now appear in two blocks for each command and structure - handcoded "Valid Usage" and the implicit "Valid Usage (Implicit)" (internal issue 392). * Add the +returnedonly="false"+ attribute to WSI output structures, removing incorrectly generated implicit validity statements for slink:VkDisplayPropertiesKHR, slink:VkDisplayPlanePropertiesKHR, slink:VkDisplayModePropertiesKHR, slink:VkDisplayPlaneCapabilitiesKHR, slink:VkSurfaceCapabilitiesKHR, and slink:VkSurfaceFormatKHR structures (internal issue 486). * Update slink:VkImageLayout to require the ename:VK_IMAGE_USAGE_SAMPLED_BIT be set for sampled depth/stencil images (internal issue 487). * Use an explicit format specifier string for the date command invocation in the +Makefile+ instead of the shorthand -R option, which doesn't work on BSD and MaxOS X date commands (internal issue 500). Other Issues: * Use the terms ``allocation scope'' and ``extension scope'' instead of just ``scope'', and add them to the glossary.
2016-10-01 04:13:37 +00:00
between `1.0` and
sname:VkPhysicalDeviceLimits::pname:maxSamplerAnisotropy, inclusive
Change log for May 20, 2017 Vulkan 1.0.50 spec update: * Bump API patch number and header version number to 50 for this update. Github Issues: * Fix numerous minor issues with the VK_EXT_debug_report extension (public issues 478, 483, 486, 489, 490). Internal Issues: * Update flink:vkAllocateDescriptorSets to specify conditions under which to return ename:VK_ERROR_FRAGMENTED_POOL or ename:VK_ERROR_OUT_OF_POOL_MEMORY instead of out-of-host/out-of-device-memory, and improve the <<fundamentals-errorcodes, description of those errors (internal issue 654). * Add a NOTE documenting that flink:vkAcquireNextImageKHR can only signal a single semaphore, and how to deal with that when multiple physical devices in a logical device need to wait on it (internal issue 730). * Improve description of pname:pNext chains of slink:VkPhysicalDeviceImageFormatInfo2KHR and slink:VkImageFormatProperties2KHR (internal issue 814). * Clean up math markup issues in the <<textures, Image Operations>> chapter (internal issue 818). * Update validusage target to use more robust code for preprocessing, by making direct use of Asciidoctor's preprocessor. Added uniqueItems check to JSON vu schema and add clean_validusage target (internal issue 826). * Update style guide to prohibit writing non-self-contained (on a single bullet point) Valid Usage statements, and modify offending Valid Usage statements in the Specification to match, to assist with automatic extraction for the validation layers (internal issue 828). * Add ename:VK_VALIDATION_CHECK_SHADERS_EXT to elink:VkValidationCheckEXT of the `VK_EXT_validation_flags` extension, to selectively disable shader validation. * Remove duplicate valid usage statement for slink:VkImageMemoryBarrier. * Modify reflow.py script to place VUID tag anchors standalone on a line following their corresponding bullet point, and reflow the spec text accordingly (this had been pending since the initial tag deployment). New Extensions: * `VK_AMD_texture_gather_bias_lod`
2017-05-21 00:00:50 +00:00
* [[VUID-VkSamplerCreateInfo-unnormalizedCoordinates-01072]]
If pname:unnormalizedCoordinates is ename:VK_TRUE, pname:minFilter and
Change log for September 30, 2016 Vulkan 1.0.29 spec update: * Bump API patch number and header version number to 29 for this update. Github Issues: * Remove redundant constraint on slink:VkCommandBufferInheritanceInfo::pname:queryFlags (public issue 224). * Fix typo and remove link in Note in the <<extended-functionality-instance-extensions-and-devices, Instance Extensions and Device Extensions>> section (public issue 359). * Fix erroneous validation statement for the pname:layout member of slink:VkComputePipelineCreateInfo (public issue 362). Internal Issues: * Restore long figure captions using asciidoc sidebar blocks, due to restrictions of asciidoc syntax (internal issue 101). * Replace most latexmath equations with comparable markup in straight asciidoc, which significantly improves time required to fully load and process the HTML forms of the Specification. There are known minor font and alignment inconsistencies with MathJax and PDF rendering of latexmath equations. Please do not file github issues about these. We are aware of the inconsistencies and will make refinements over time, while the performance improvements are compelling in at least some major browsers (internal issue 313). * Move handcoded validity statements from +vk.xml+ into the Specification body, easing work in the single-branch model. Specify the distinction between these explicit statements, and the implicit validity statements inferred from vk.xml. Validity statements now appear in two blocks for each command and structure - handcoded "Valid Usage" and the implicit "Valid Usage (Implicit)" (internal issue 392). * Add the +returnedonly="false"+ attribute to WSI output structures, removing incorrectly generated implicit validity statements for slink:VkDisplayPropertiesKHR, slink:VkDisplayPlanePropertiesKHR, slink:VkDisplayModePropertiesKHR, slink:VkDisplayPlaneCapabilitiesKHR, slink:VkSurfaceCapabilitiesKHR, and slink:VkSurfaceFormatKHR structures (internal issue 486). * Update slink:VkImageLayout to require the ename:VK_IMAGE_USAGE_SAMPLED_BIT be set for sampled depth/stencil images (internal issue 487). * Use an explicit format specifier string for the date command invocation in the +Makefile+ instead of the shorthand -R option, which doesn't work on BSD and MaxOS X date commands (internal issue 500). Other Issues: * Use the terms ``allocation scope'' and ``extension scope'' instead of just ``scope'', and add them to the glossary.
2016-10-01 04:13:37 +00:00
pname:magFilter must: be equal
Change log for May 20, 2017 Vulkan 1.0.50 spec update: * Bump API patch number and header version number to 50 for this update. Github Issues: * Fix numerous minor issues with the VK_EXT_debug_report extension (public issues 478, 483, 486, 489, 490). Internal Issues: * Update flink:vkAllocateDescriptorSets to specify conditions under which to return ename:VK_ERROR_FRAGMENTED_POOL or ename:VK_ERROR_OUT_OF_POOL_MEMORY instead of out-of-host/out-of-device-memory, and improve the <<fundamentals-errorcodes, description of those errors (internal issue 654). * Add a NOTE documenting that flink:vkAcquireNextImageKHR can only signal a single semaphore, and how to deal with that when multiple physical devices in a logical device need to wait on it (internal issue 730). * Improve description of pname:pNext chains of slink:VkPhysicalDeviceImageFormatInfo2KHR and slink:VkImageFormatProperties2KHR (internal issue 814). * Clean up math markup issues in the <<textures, Image Operations>> chapter (internal issue 818). * Update validusage target to use more robust code for preprocessing, by making direct use of Asciidoctor's preprocessor. Added uniqueItems check to JSON vu schema and add clean_validusage target (internal issue 826). * Update style guide to prohibit writing non-self-contained (on a single bullet point) Valid Usage statements, and modify offending Valid Usage statements in the Specification to match, to assist with automatic extraction for the validation layers (internal issue 828). * Add ename:VK_VALIDATION_CHECK_SHADERS_EXT to elink:VkValidationCheckEXT of the `VK_EXT_validation_flags` extension, to selectively disable shader validation. * Remove duplicate valid usage statement for slink:VkImageMemoryBarrier. * Modify reflow.py script to place VUID tag anchors standalone on a line following their corresponding bullet point, and reflow the spec text accordingly (this had been pending since the initial tag deployment). New Extensions: * `VK_AMD_texture_gather_bias_lod`
2017-05-21 00:00:50 +00:00
* [[VUID-VkSamplerCreateInfo-unnormalizedCoordinates-01073]]
If pname:unnormalizedCoordinates is ename:VK_TRUE, pname:mipmapMode
Change log for September 30, 2016 Vulkan 1.0.29 spec update: * Bump API patch number and header version number to 29 for this update. Github Issues: * Remove redundant constraint on slink:VkCommandBufferInheritanceInfo::pname:queryFlags (public issue 224). * Fix typo and remove link in Note in the <<extended-functionality-instance-extensions-and-devices, Instance Extensions and Device Extensions>> section (public issue 359). * Fix erroneous validation statement for the pname:layout member of slink:VkComputePipelineCreateInfo (public issue 362). Internal Issues: * Restore long figure captions using asciidoc sidebar blocks, due to restrictions of asciidoc syntax (internal issue 101). * Replace most latexmath equations with comparable markup in straight asciidoc, which significantly improves time required to fully load and process the HTML forms of the Specification. There are known minor font and alignment inconsistencies with MathJax and PDF rendering of latexmath equations. Please do not file github issues about these. We are aware of the inconsistencies and will make refinements over time, while the performance improvements are compelling in at least some major browsers (internal issue 313). * Move handcoded validity statements from +vk.xml+ into the Specification body, easing work in the single-branch model. Specify the distinction between these explicit statements, and the implicit validity statements inferred from vk.xml. Validity statements now appear in two blocks for each command and structure - handcoded "Valid Usage" and the implicit "Valid Usage (Implicit)" (internal issue 392). * Add the +returnedonly="false"+ attribute to WSI output structures, removing incorrectly generated implicit validity statements for slink:VkDisplayPropertiesKHR, slink:VkDisplayPlanePropertiesKHR, slink:VkDisplayModePropertiesKHR, slink:VkDisplayPlaneCapabilitiesKHR, slink:VkSurfaceCapabilitiesKHR, and slink:VkSurfaceFormatKHR structures (internal issue 486). * Update slink:VkImageLayout to require the ename:VK_IMAGE_USAGE_SAMPLED_BIT be set for sampled depth/stencil images (internal issue 487). * Use an explicit format specifier string for the date command invocation in the +Makefile+ instead of the shorthand -R option, which doesn't work on BSD and MaxOS X date commands (internal issue 500). Other Issues: * Use the terms ``allocation scope'' and ``extension scope'' instead of just ``scope'', and add them to the glossary.
2016-10-01 04:13:37 +00:00
must: be ename:VK_SAMPLER_MIPMAP_MODE_NEAREST
Change log for May 20, 2017 Vulkan 1.0.50 spec update: * Bump API patch number and header version number to 50 for this update. Github Issues: * Fix numerous minor issues with the VK_EXT_debug_report extension (public issues 478, 483, 486, 489, 490). Internal Issues: * Update flink:vkAllocateDescriptorSets to specify conditions under which to return ename:VK_ERROR_FRAGMENTED_POOL or ename:VK_ERROR_OUT_OF_POOL_MEMORY instead of out-of-host/out-of-device-memory, and improve the <<fundamentals-errorcodes, description of those errors (internal issue 654). * Add a NOTE documenting that flink:vkAcquireNextImageKHR can only signal a single semaphore, and how to deal with that when multiple physical devices in a logical device need to wait on it (internal issue 730). * Improve description of pname:pNext chains of slink:VkPhysicalDeviceImageFormatInfo2KHR and slink:VkImageFormatProperties2KHR (internal issue 814). * Clean up math markup issues in the <<textures, Image Operations>> chapter (internal issue 818). * Update validusage target to use more robust code for preprocessing, by making direct use of Asciidoctor's preprocessor. Added uniqueItems check to JSON vu schema and add clean_validusage target (internal issue 826). * Update style guide to prohibit writing non-self-contained (on a single bullet point) Valid Usage statements, and modify offending Valid Usage statements in the Specification to match, to assist with automatic extraction for the validation layers (internal issue 828). * Add ename:VK_VALIDATION_CHECK_SHADERS_EXT to elink:VkValidationCheckEXT of the `VK_EXT_validation_flags` extension, to selectively disable shader validation. * Remove duplicate valid usage statement for slink:VkImageMemoryBarrier. * Modify reflow.py script to place VUID tag anchors standalone on a line following their corresponding bullet point, and reflow the spec text accordingly (this had been pending since the initial tag deployment). New Extensions: * `VK_AMD_texture_gather_bias_lod`
2017-05-21 00:00:50 +00:00
* [[VUID-VkSamplerCreateInfo-unnormalizedCoordinates-01074]]
If pname:unnormalizedCoordinates is ename:VK_TRUE, pname:minLod and
Change log for September 30, 2016 Vulkan 1.0.29 spec update: * Bump API patch number and header version number to 29 for this update. Github Issues: * Remove redundant constraint on slink:VkCommandBufferInheritanceInfo::pname:queryFlags (public issue 224). * Fix typo and remove link in Note in the <<extended-functionality-instance-extensions-and-devices, Instance Extensions and Device Extensions>> section (public issue 359). * Fix erroneous validation statement for the pname:layout member of slink:VkComputePipelineCreateInfo (public issue 362). Internal Issues: * Restore long figure captions using asciidoc sidebar blocks, due to restrictions of asciidoc syntax (internal issue 101). * Replace most latexmath equations with comparable markup in straight asciidoc, which significantly improves time required to fully load and process the HTML forms of the Specification. There are known minor font and alignment inconsistencies with MathJax and PDF rendering of latexmath equations. Please do not file github issues about these. We are aware of the inconsistencies and will make refinements over time, while the performance improvements are compelling in at least some major browsers (internal issue 313). * Move handcoded validity statements from +vk.xml+ into the Specification body, easing work in the single-branch model. Specify the distinction between these explicit statements, and the implicit validity statements inferred from vk.xml. Validity statements now appear in two blocks for each command and structure - handcoded "Valid Usage" and the implicit "Valid Usage (Implicit)" (internal issue 392). * Add the +returnedonly="false"+ attribute to WSI output structures, removing incorrectly generated implicit validity statements for slink:VkDisplayPropertiesKHR, slink:VkDisplayPlanePropertiesKHR, slink:VkDisplayModePropertiesKHR, slink:VkDisplayPlaneCapabilitiesKHR, slink:VkSurfaceCapabilitiesKHR, and slink:VkSurfaceFormatKHR structures (internal issue 486). * Update slink:VkImageLayout to require the ename:VK_IMAGE_USAGE_SAMPLED_BIT be set for sampled depth/stencil images (internal issue 487). * Use an explicit format specifier string for the date command invocation in the +Makefile+ instead of the shorthand -R option, which doesn't work on BSD and MaxOS X date commands (internal issue 500). Other Issues: * Use the terms ``allocation scope'' and ``extension scope'' instead of just ``scope'', and add them to the glossary.
2016-10-01 04:13:37 +00:00
pname:maxLod must: be zero
Change log for May 20, 2017 Vulkan 1.0.50 spec update: * Bump API patch number and header version number to 50 for this update. Github Issues: * Fix numerous minor issues with the VK_EXT_debug_report extension (public issues 478, 483, 486, 489, 490). Internal Issues: * Update flink:vkAllocateDescriptorSets to specify conditions under which to return ename:VK_ERROR_FRAGMENTED_POOL or ename:VK_ERROR_OUT_OF_POOL_MEMORY instead of out-of-host/out-of-device-memory, and improve the <<fundamentals-errorcodes, description of those errors (internal issue 654). * Add a NOTE documenting that flink:vkAcquireNextImageKHR can only signal a single semaphore, and how to deal with that when multiple physical devices in a logical device need to wait on it (internal issue 730). * Improve description of pname:pNext chains of slink:VkPhysicalDeviceImageFormatInfo2KHR and slink:VkImageFormatProperties2KHR (internal issue 814). * Clean up math markup issues in the <<textures, Image Operations>> chapter (internal issue 818). * Update validusage target to use more robust code for preprocessing, by making direct use of Asciidoctor's preprocessor. Added uniqueItems check to JSON vu schema and add clean_validusage target (internal issue 826). * Update style guide to prohibit writing non-self-contained (on a single bullet point) Valid Usage statements, and modify offending Valid Usage statements in the Specification to match, to assist with automatic extraction for the validation layers (internal issue 828). * Add ename:VK_VALIDATION_CHECK_SHADERS_EXT to elink:VkValidationCheckEXT of the `VK_EXT_validation_flags` extension, to selectively disable shader validation. * Remove duplicate valid usage statement for slink:VkImageMemoryBarrier. * Modify reflow.py script to place VUID tag anchors standalone on a line following their corresponding bullet point, and reflow the spec text accordingly (this had been pending since the initial tag deployment). New Extensions: * `VK_AMD_texture_gather_bias_lod`
2017-05-21 00:00:50 +00:00
* [[VUID-VkSamplerCreateInfo-unnormalizedCoordinates-01075]]
If pname:unnormalizedCoordinates is ename:VK_TRUE, pname:addressModeU
Change log for September 30, 2016 Vulkan 1.0.29 spec update: * Bump API patch number and header version number to 29 for this update. Github Issues: * Remove redundant constraint on slink:VkCommandBufferInheritanceInfo::pname:queryFlags (public issue 224). * Fix typo and remove link in Note in the <<extended-functionality-instance-extensions-and-devices, Instance Extensions and Device Extensions>> section (public issue 359). * Fix erroneous validation statement for the pname:layout member of slink:VkComputePipelineCreateInfo (public issue 362). Internal Issues: * Restore long figure captions using asciidoc sidebar blocks, due to restrictions of asciidoc syntax (internal issue 101). * Replace most latexmath equations with comparable markup in straight asciidoc, which significantly improves time required to fully load and process the HTML forms of the Specification. There are known minor font and alignment inconsistencies with MathJax and PDF rendering of latexmath equations. Please do not file github issues about these. We are aware of the inconsistencies and will make refinements over time, while the performance improvements are compelling in at least some major browsers (internal issue 313). * Move handcoded validity statements from +vk.xml+ into the Specification body, easing work in the single-branch model. Specify the distinction between these explicit statements, and the implicit validity statements inferred from vk.xml. Validity statements now appear in two blocks for each command and structure - handcoded "Valid Usage" and the implicit "Valid Usage (Implicit)" (internal issue 392). * Add the +returnedonly="false"+ attribute to WSI output structures, removing incorrectly generated implicit validity statements for slink:VkDisplayPropertiesKHR, slink:VkDisplayPlanePropertiesKHR, slink:VkDisplayModePropertiesKHR, slink:VkDisplayPlaneCapabilitiesKHR, slink:VkSurfaceCapabilitiesKHR, and slink:VkSurfaceFormatKHR structures (internal issue 486). * Update slink:VkImageLayout to require the ename:VK_IMAGE_USAGE_SAMPLED_BIT be set for sampled depth/stencil images (internal issue 487). * Use an explicit format specifier string for the date command invocation in the +Makefile+ instead of the shorthand -R option, which doesn't work on BSD and MaxOS X date commands (internal issue 500). Other Issues: * Use the terms ``allocation scope'' and ``extension scope'' instead of just ``scope'', and add them to the glossary.
2016-10-01 04:13:37 +00:00
and pname:addressModeV must: each be either
ename:VK_SAMPLER_ADDRESS_MODE_CLAMP_TO_EDGE or
ename:VK_SAMPLER_ADDRESS_MODE_CLAMP_TO_BORDER
Change log for May 20, 2017 Vulkan 1.0.50 spec update: * Bump API patch number and header version number to 50 for this update. Github Issues: * Fix numerous minor issues with the VK_EXT_debug_report extension (public issues 478, 483, 486, 489, 490). Internal Issues: * Update flink:vkAllocateDescriptorSets to specify conditions under which to return ename:VK_ERROR_FRAGMENTED_POOL or ename:VK_ERROR_OUT_OF_POOL_MEMORY instead of out-of-host/out-of-device-memory, and improve the <<fundamentals-errorcodes, description of those errors (internal issue 654). * Add a NOTE documenting that flink:vkAcquireNextImageKHR can only signal a single semaphore, and how to deal with that when multiple physical devices in a logical device need to wait on it (internal issue 730). * Improve description of pname:pNext chains of slink:VkPhysicalDeviceImageFormatInfo2KHR and slink:VkImageFormatProperties2KHR (internal issue 814). * Clean up math markup issues in the <<textures, Image Operations>> chapter (internal issue 818). * Update validusage target to use more robust code for preprocessing, by making direct use of Asciidoctor's preprocessor. Added uniqueItems check to JSON vu schema and add clean_validusage target (internal issue 826). * Update style guide to prohibit writing non-self-contained (on a single bullet point) Valid Usage statements, and modify offending Valid Usage statements in the Specification to match, to assist with automatic extraction for the validation layers (internal issue 828). * Add ename:VK_VALIDATION_CHECK_SHADERS_EXT to elink:VkValidationCheckEXT of the `VK_EXT_validation_flags` extension, to selectively disable shader validation. * Remove duplicate valid usage statement for slink:VkImageMemoryBarrier. * Modify reflow.py script to place VUID tag anchors standalone on a line following their corresponding bullet point, and reflow the spec text accordingly (this had been pending since the initial tag deployment). New Extensions: * `VK_AMD_texture_gather_bias_lod`
2017-05-21 00:00:50 +00:00
* [[VUID-VkSamplerCreateInfo-unnormalizedCoordinates-01076]]
If pname:unnormalizedCoordinates is ename:VK_TRUE,
Change log for September 30, 2016 Vulkan 1.0.29 spec update: * Bump API patch number and header version number to 29 for this update. Github Issues: * Remove redundant constraint on slink:VkCommandBufferInheritanceInfo::pname:queryFlags (public issue 224). * Fix typo and remove link in Note in the <<extended-functionality-instance-extensions-and-devices, Instance Extensions and Device Extensions>> section (public issue 359). * Fix erroneous validation statement for the pname:layout member of slink:VkComputePipelineCreateInfo (public issue 362). Internal Issues: * Restore long figure captions using asciidoc sidebar blocks, due to restrictions of asciidoc syntax (internal issue 101). * Replace most latexmath equations with comparable markup in straight asciidoc, which significantly improves time required to fully load and process the HTML forms of the Specification. There are known minor font and alignment inconsistencies with MathJax and PDF rendering of latexmath equations. Please do not file github issues about these. We are aware of the inconsistencies and will make refinements over time, while the performance improvements are compelling in at least some major browsers (internal issue 313). * Move handcoded validity statements from +vk.xml+ into the Specification body, easing work in the single-branch model. Specify the distinction between these explicit statements, and the implicit validity statements inferred from vk.xml. Validity statements now appear in two blocks for each command and structure - handcoded "Valid Usage" and the implicit "Valid Usage (Implicit)" (internal issue 392). * Add the +returnedonly="false"+ attribute to WSI output structures, removing incorrectly generated implicit validity statements for slink:VkDisplayPropertiesKHR, slink:VkDisplayPlanePropertiesKHR, slink:VkDisplayModePropertiesKHR, slink:VkDisplayPlaneCapabilitiesKHR, slink:VkSurfaceCapabilitiesKHR, and slink:VkSurfaceFormatKHR structures (internal issue 486). * Update slink:VkImageLayout to require the ename:VK_IMAGE_USAGE_SAMPLED_BIT be set for sampled depth/stencil images (internal issue 487). * Use an explicit format specifier string for the date command invocation in the +Makefile+ instead of the shorthand -R option, which doesn't work on BSD and MaxOS X date commands (internal issue 500). Other Issues: * Use the terms ``allocation scope'' and ``extension scope'' instead of just ``scope'', and add them to the glossary.
2016-10-01 04:13:37 +00:00
pname:anisotropyEnable must: be ename:VK_FALSE
Change log for May 20, 2017 Vulkan 1.0.50 spec update: * Bump API patch number and header version number to 50 for this update. Github Issues: * Fix numerous minor issues with the VK_EXT_debug_report extension (public issues 478, 483, 486, 489, 490). Internal Issues: * Update flink:vkAllocateDescriptorSets to specify conditions under which to return ename:VK_ERROR_FRAGMENTED_POOL or ename:VK_ERROR_OUT_OF_POOL_MEMORY instead of out-of-host/out-of-device-memory, and improve the <<fundamentals-errorcodes, description of those errors (internal issue 654). * Add a NOTE documenting that flink:vkAcquireNextImageKHR can only signal a single semaphore, and how to deal with that when multiple physical devices in a logical device need to wait on it (internal issue 730). * Improve description of pname:pNext chains of slink:VkPhysicalDeviceImageFormatInfo2KHR and slink:VkImageFormatProperties2KHR (internal issue 814). * Clean up math markup issues in the <<textures, Image Operations>> chapter (internal issue 818). * Update validusage target to use more robust code for preprocessing, by making direct use of Asciidoctor's preprocessor. Added uniqueItems check to JSON vu schema and add clean_validusage target (internal issue 826). * Update style guide to prohibit writing non-self-contained (on a single bullet point) Valid Usage statements, and modify offending Valid Usage statements in the Specification to match, to assist with automatic extraction for the validation layers (internal issue 828). * Add ename:VK_VALIDATION_CHECK_SHADERS_EXT to elink:VkValidationCheckEXT of the `VK_EXT_validation_flags` extension, to selectively disable shader validation. * Remove duplicate valid usage statement for slink:VkImageMemoryBarrier. * Modify reflow.py script to place VUID tag anchors standalone on a line following their corresponding bullet point, and reflow the spec text accordingly (this had been pending since the initial tag deployment). New Extensions: * `VK_AMD_texture_gather_bias_lod`
2017-05-21 00:00:50 +00:00
* [[VUID-VkSamplerCreateInfo-unnormalizedCoordinates-01077]]
If pname:unnormalizedCoordinates is ename:VK_TRUE, pname:compareEnable
Change log for September 30, 2016 Vulkan 1.0.29 spec update: * Bump API patch number and header version number to 29 for this update. Github Issues: * Remove redundant constraint on slink:VkCommandBufferInheritanceInfo::pname:queryFlags (public issue 224). * Fix typo and remove link in Note in the <<extended-functionality-instance-extensions-and-devices, Instance Extensions and Device Extensions>> section (public issue 359). * Fix erroneous validation statement for the pname:layout member of slink:VkComputePipelineCreateInfo (public issue 362). Internal Issues: * Restore long figure captions using asciidoc sidebar blocks, due to restrictions of asciidoc syntax (internal issue 101). * Replace most latexmath equations with comparable markup in straight asciidoc, which significantly improves time required to fully load and process the HTML forms of the Specification. There are known minor font and alignment inconsistencies with MathJax and PDF rendering of latexmath equations. Please do not file github issues about these. We are aware of the inconsistencies and will make refinements over time, while the performance improvements are compelling in at least some major browsers (internal issue 313). * Move handcoded validity statements from +vk.xml+ into the Specification body, easing work in the single-branch model. Specify the distinction between these explicit statements, and the implicit validity statements inferred from vk.xml. Validity statements now appear in two blocks for each command and structure - handcoded "Valid Usage" and the implicit "Valid Usage (Implicit)" (internal issue 392). * Add the +returnedonly="false"+ attribute to WSI output structures, removing incorrectly generated implicit validity statements for slink:VkDisplayPropertiesKHR, slink:VkDisplayPlanePropertiesKHR, slink:VkDisplayModePropertiesKHR, slink:VkDisplayPlaneCapabilitiesKHR, slink:VkSurfaceCapabilitiesKHR, and slink:VkSurfaceFormatKHR structures (internal issue 486). * Update slink:VkImageLayout to require the ename:VK_IMAGE_USAGE_SAMPLED_BIT be set for sampled depth/stencil images (internal issue 487). * Use an explicit format specifier string for the date command invocation in the +Makefile+ instead of the shorthand -R option, which doesn't work on BSD and MaxOS X date commands (internal issue 500). Other Issues: * Use the terms ``allocation scope'' and ``extension scope'' instead of just ``scope'', and add them to the glossary.
2016-10-01 04:13:37 +00:00
must: be ename:VK_FALSE
Change log for May 20, 2017 Vulkan 1.0.50 spec update: * Bump API patch number and header version number to 50 for this update. Github Issues: * Fix numerous minor issues with the VK_EXT_debug_report extension (public issues 478, 483, 486, 489, 490). Internal Issues: * Update flink:vkAllocateDescriptorSets to specify conditions under which to return ename:VK_ERROR_FRAGMENTED_POOL or ename:VK_ERROR_OUT_OF_POOL_MEMORY instead of out-of-host/out-of-device-memory, and improve the <<fundamentals-errorcodes, description of those errors (internal issue 654). * Add a NOTE documenting that flink:vkAcquireNextImageKHR can only signal a single semaphore, and how to deal with that when multiple physical devices in a logical device need to wait on it (internal issue 730). * Improve description of pname:pNext chains of slink:VkPhysicalDeviceImageFormatInfo2KHR and slink:VkImageFormatProperties2KHR (internal issue 814). * Clean up math markup issues in the <<textures, Image Operations>> chapter (internal issue 818). * Update validusage target to use more robust code for preprocessing, by making direct use of Asciidoctor's preprocessor. Added uniqueItems check to JSON vu schema and add clean_validusage target (internal issue 826). * Update style guide to prohibit writing non-self-contained (on a single bullet point) Valid Usage statements, and modify offending Valid Usage statements in the Specification to match, to assist with automatic extraction for the validation layers (internal issue 828). * Add ename:VK_VALIDATION_CHECK_SHADERS_EXT to elink:VkValidationCheckEXT of the `VK_EXT_validation_flags` extension, to selectively disable shader validation. * Remove duplicate valid usage statement for slink:VkImageMemoryBarrier. * Modify reflow.py script to place VUID tag anchors standalone on a line following their corresponding bullet point, and reflow the spec text accordingly (this had been pending since the initial tag deployment). New Extensions: * `VK_AMD_texture_gather_bias_lod`
2017-05-21 00:00:50 +00:00
* [[VUID-VkSamplerCreateInfo-addressModeU-01078]]
If any of pname:addressModeU, pname:addressModeV or pname:addressModeW
Change log for September 30, 2016 Vulkan 1.0.29 spec update: * Bump API patch number and header version number to 29 for this update. Github Issues: * Remove redundant constraint on slink:VkCommandBufferInheritanceInfo::pname:queryFlags (public issue 224). * Fix typo and remove link in Note in the <<extended-functionality-instance-extensions-and-devices, Instance Extensions and Device Extensions>> section (public issue 359). * Fix erroneous validation statement for the pname:layout member of slink:VkComputePipelineCreateInfo (public issue 362). Internal Issues: * Restore long figure captions using asciidoc sidebar blocks, due to restrictions of asciidoc syntax (internal issue 101). * Replace most latexmath equations with comparable markup in straight asciidoc, which significantly improves time required to fully load and process the HTML forms of the Specification. There are known minor font and alignment inconsistencies with MathJax and PDF rendering of latexmath equations. Please do not file github issues about these. We are aware of the inconsistencies and will make refinements over time, while the performance improvements are compelling in at least some major browsers (internal issue 313). * Move handcoded validity statements from +vk.xml+ into the Specification body, easing work in the single-branch model. Specify the distinction between these explicit statements, and the implicit validity statements inferred from vk.xml. Validity statements now appear in two blocks for each command and structure - handcoded "Valid Usage" and the implicit "Valid Usage (Implicit)" (internal issue 392). * Add the +returnedonly="false"+ attribute to WSI output structures, removing incorrectly generated implicit validity statements for slink:VkDisplayPropertiesKHR, slink:VkDisplayPlanePropertiesKHR, slink:VkDisplayModePropertiesKHR, slink:VkDisplayPlaneCapabilitiesKHR, slink:VkSurfaceCapabilitiesKHR, and slink:VkSurfaceFormatKHR structures (internal issue 486). * Update slink:VkImageLayout to require the ename:VK_IMAGE_USAGE_SAMPLED_BIT be set for sampled depth/stencil images (internal issue 487). * Use an explicit format specifier string for the date command invocation in the +Makefile+ instead of the shorthand -R option, which doesn't work on BSD and MaxOS X date commands (internal issue 500). Other Issues: * Use the terms ``allocation scope'' and ``extension scope'' instead of just ``scope'', and add them to the glossary.
2016-10-01 04:13:37 +00:00
are ename:VK_SAMPLER_ADDRESS_MODE_CLAMP_TO_BORDER, pname:borderColor
must: be a valid elink:VkBorderColor value
Change log for May 20, 2017 Vulkan 1.0.50 spec update: * Bump API patch number and header version number to 50 for this update. Github Issues: * Fix numerous minor issues with the VK_EXT_debug_report extension (public issues 478, 483, 486, 489, 490). Internal Issues: * Update flink:vkAllocateDescriptorSets to specify conditions under which to return ename:VK_ERROR_FRAGMENTED_POOL or ename:VK_ERROR_OUT_OF_POOL_MEMORY instead of out-of-host/out-of-device-memory, and improve the <<fundamentals-errorcodes, description of those errors (internal issue 654). * Add a NOTE documenting that flink:vkAcquireNextImageKHR can only signal a single semaphore, and how to deal with that when multiple physical devices in a logical device need to wait on it (internal issue 730). * Improve description of pname:pNext chains of slink:VkPhysicalDeviceImageFormatInfo2KHR and slink:VkImageFormatProperties2KHR (internal issue 814). * Clean up math markup issues in the <<textures, Image Operations>> chapter (internal issue 818). * Update validusage target to use more robust code for preprocessing, by making direct use of Asciidoctor's preprocessor. Added uniqueItems check to JSON vu schema and add clean_validusage target (internal issue 826). * Update style guide to prohibit writing non-self-contained (on a single bullet point) Valid Usage statements, and modify offending Valid Usage statements in the Specification to match, to assist with automatic extraction for the validation layers (internal issue 828). * Add ename:VK_VALIDATION_CHECK_SHADERS_EXT to elink:VkValidationCheckEXT of the `VK_EXT_validation_flags` extension, to selectively disable shader validation. * Remove duplicate valid usage statement for slink:VkImageMemoryBarrier. * Modify reflow.py script to place VUID tag anchors standalone on a line following their corresponding bullet point, and reflow the spec text accordingly (this had been pending since the initial tag deployment). New Extensions: * `VK_AMD_texture_gather_bias_lod`
2017-05-21 00:00:50 +00:00
* [[VUID-VkSamplerCreateInfo-addressModeU-01079]]
If the +VK_KHR_sampler_mirror_clamp_to_edge+ extension is not enabled,
Change log for September 30, 2016 Vulkan 1.0.29 spec update: * Bump API patch number and header version number to 29 for this update. Github Issues: * Remove redundant constraint on slink:VkCommandBufferInheritanceInfo::pname:queryFlags (public issue 224). * Fix typo and remove link in Note in the <<extended-functionality-instance-extensions-and-devices, Instance Extensions and Device Extensions>> section (public issue 359). * Fix erroneous validation statement for the pname:layout member of slink:VkComputePipelineCreateInfo (public issue 362). Internal Issues: * Restore long figure captions using asciidoc sidebar blocks, due to restrictions of asciidoc syntax (internal issue 101). * Replace most latexmath equations with comparable markup in straight asciidoc, which significantly improves time required to fully load and process the HTML forms of the Specification. There are known minor font and alignment inconsistencies with MathJax and PDF rendering of latexmath equations. Please do not file github issues about these. We are aware of the inconsistencies and will make refinements over time, while the performance improvements are compelling in at least some major browsers (internal issue 313). * Move handcoded validity statements from +vk.xml+ into the Specification body, easing work in the single-branch model. Specify the distinction between these explicit statements, and the implicit validity statements inferred from vk.xml. Validity statements now appear in two blocks for each command and structure - handcoded "Valid Usage" and the implicit "Valid Usage (Implicit)" (internal issue 392). * Add the +returnedonly="false"+ attribute to WSI output structures, removing incorrectly generated implicit validity statements for slink:VkDisplayPropertiesKHR, slink:VkDisplayPlanePropertiesKHR, slink:VkDisplayModePropertiesKHR, slink:VkDisplayPlaneCapabilitiesKHR, slink:VkSurfaceCapabilitiesKHR, and slink:VkSurfaceFormatKHR structures (internal issue 486). * Update slink:VkImageLayout to require the ename:VK_IMAGE_USAGE_SAMPLED_BIT be set for sampled depth/stencil images (internal issue 487). * Use an explicit format specifier string for the date command invocation in the +Makefile+ instead of the shorthand -R option, which doesn't work on BSD and MaxOS X date commands (internal issue 500). Other Issues: * Use the terms ``allocation scope'' and ``extension scope'' instead of just ``scope'', and add them to the glossary.
2016-10-01 04:13:37 +00:00
pname:addressModeU, pname:addressModeV and pname:addressModeW must: not
be ename:VK_SAMPLER_ADDRESS_MODE_MIRROR_CLAMP_TO_EDGE
Change log for May 20, 2017 Vulkan 1.0.50 spec update: * Bump API patch number and header version number to 50 for this update. Github Issues: * Fix numerous minor issues with the VK_EXT_debug_report extension (public issues 478, 483, 486, 489, 490). Internal Issues: * Update flink:vkAllocateDescriptorSets to specify conditions under which to return ename:VK_ERROR_FRAGMENTED_POOL or ename:VK_ERROR_OUT_OF_POOL_MEMORY instead of out-of-host/out-of-device-memory, and improve the <<fundamentals-errorcodes, description of those errors (internal issue 654). * Add a NOTE documenting that flink:vkAcquireNextImageKHR can only signal a single semaphore, and how to deal with that when multiple physical devices in a logical device need to wait on it (internal issue 730). * Improve description of pname:pNext chains of slink:VkPhysicalDeviceImageFormatInfo2KHR and slink:VkImageFormatProperties2KHR (internal issue 814). * Clean up math markup issues in the <<textures, Image Operations>> chapter (internal issue 818). * Update validusage target to use more robust code for preprocessing, by making direct use of Asciidoctor's preprocessor. Added uniqueItems check to JSON vu schema and add clean_validusage target (internal issue 826). * Update style guide to prohibit writing non-self-contained (on a single bullet point) Valid Usage statements, and modify offending Valid Usage statements in the Specification to match, to assist with automatic extraction for the validation layers (internal issue 828). * Add ename:VK_VALIDATION_CHECK_SHADERS_EXT to elink:VkValidationCheckEXT of the `VK_EXT_validation_flags` extension, to selectively disable shader validation. * Remove duplicate valid usage statement for slink:VkImageMemoryBarrier. * Modify reflow.py script to place VUID tag anchors standalone on a line following their corresponding bullet point, and reflow the spec text accordingly (this had been pending since the initial tag deployment). New Extensions: * `VK_AMD_texture_gather_bias_lod`
2017-05-21 00:00:50 +00:00
* [[VUID-VkSamplerCreateInfo-compareEnable-01080]]
If pname:compareEnable is ename:VK_TRUE, pname:compareOp must: be a
Change log for September 30, 2016 Vulkan 1.0.29 spec update: * Bump API patch number and header version number to 29 for this update. Github Issues: * Remove redundant constraint on slink:VkCommandBufferInheritanceInfo::pname:queryFlags (public issue 224). * Fix typo and remove link in Note in the <<extended-functionality-instance-extensions-and-devices, Instance Extensions and Device Extensions>> section (public issue 359). * Fix erroneous validation statement for the pname:layout member of slink:VkComputePipelineCreateInfo (public issue 362). Internal Issues: * Restore long figure captions using asciidoc sidebar blocks, due to restrictions of asciidoc syntax (internal issue 101). * Replace most latexmath equations with comparable markup in straight asciidoc, which significantly improves time required to fully load and process the HTML forms of the Specification. There are known minor font and alignment inconsistencies with MathJax and PDF rendering of latexmath equations. Please do not file github issues about these. We are aware of the inconsistencies and will make refinements over time, while the performance improvements are compelling in at least some major browsers (internal issue 313). * Move handcoded validity statements from +vk.xml+ into the Specification body, easing work in the single-branch model. Specify the distinction between these explicit statements, and the implicit validity statements inferred from vk.xml. Validity statements now appear in two blocks for each command and structure - handcoded "Valid Usage" and the implicit "Valid Usage (Implicit)" (internal issue 392). * Add the +returnedonly="false"+ attribute to WSI output structures, removing incorrectly generated implicit validity statements for slink:VkDisplayPropertiesKHR, slink:VkDisplayPlanePropertiesKHR, slink:VkDisplayModePropertiesKHR, slink:VkDisplayPlaneCapabilitiesKHR, slink:VkSurfaceCapabilitiesKHR, and slink:VkSurfaceFormatKHR structures (internal issue 486). * Update slink:VkImageLayout to require the ename:VK_IMAGE_USAGE_SAMPLED_BIT be set for sampled depth/stencil images (internal issue 487). * Use an explicit format specifier string for the date command invocation in the +Makefile+ instead of the shorthand -R option, which doesn't work on BSD and MaxOS X date commands (internal issue 500). Other Issues: * Use the terms ``allocation scope'' and ``extension scope'' instead of just ``scope'', and add them to the glossary.
2016-10-01 04:13:37 +00:00
valid elink:VkCompareOp value
ifdef::VK_IMG_filter_cubic[]
Change log for May 20, 2017 Vulkan 1.0.50 spec update: * Bump API patch number and header version number to 50 for this update. Github Issues: * Fix numerous minor issues with the VK_EXT_debug_report extension (public issues 478, 483, 486, 489, 490). Internal Issues: * Update flink:vkAllocateDescriptorSets to specify conditions under which to return ename:VK_ERROR_FRAGMENTED_POOL or ename:VK_ERROR_OUT_OF_POOL_MEMORY instead of out-of-host/out-of-device-memory, and improve the <<fundamentals-errorcodes, description of those errors (internal issue 654). * Add a NOTE documenting that flink:vkAcquireNextImageKHR can only signal a single semaphore, and how to deal with that when multiple physical devices in a logical device need to wait on it (internal issue 730). * Improve description of pname:pNext chains of slink:VkPhysicalDeviceImageFormatInfo2KHR and slink:VkImageFormatProperties2KHR (internal issue 814). * Clean up math markup issues in the <<textures, Image Operations>> chapter (internal issue 818). * Update validusage target to use more robust code for preprocessing, by making direct use of Asciidoctor's preprocessor. Added uniqueItems check to JSON vu schema and add clean_validusage target (internal issue 826). * Update style guide to prohibit writing non-self-contained (on a single bullet point) Valid Usage statements, and modify offending Valid Usage statements in the Specification to match, to assist with automatic extraction for the validation layers (internal issue 828). * Add ename:VK_VALIDATION_CHECK_SHADERS_EXT to elink:VkValidationCheckEXT of the `VK_EXT_validation_flags` extension, to selectively disable shader validation. * Remove duplicate valid usage statement for slink:VkImageMemoryBarrier. * Modify reflow.py script to place VUID tag anchors standalone on a line following their corresponding bullet point, and reflow the spec text accordingly (this had been pending since the initial tag deployment). New Extensions: * `VK_AMD_texture_gather_bias_lod`
2017-05-21 00:00:50 +00:00
* [[VUID-VkSamplerCreateInfo-magFilter-01081]]
If either pname:magFilter or pname:minFilter is
Change log for September 30, 2016 Vulkan 1.0.29 spec update: * Bump API patch number and header version number to 29 for this update. Github Issues: * Remove redundant constraint on slink:VkCommandBufferInheritanceInfo::pname:queryFlags (public issue 224). * Fix typo and remove link in Note in the <<extended-functionality-instance-extensions-and-devices, Instance Extensions and Device Extensions>> section (public issue 359). * Fix erroneous validation statement for the pname:layout member of slink:VkComputePipelineCreateInfo (public issue 362). Internal Issues: * Restore long figure captions using asciidoc sidebar blocks, due to restrictions of asciidoc syntax (internal issue 101). * Replace most latexmath equations with comparable markup in straight asciidoc, which significantly improves time required to fully load and process the HTML forms of the Specification. There are known minor font and alignment inconsistencies with MathJax and PDF rendering of latexmath equations. Please do not file github issues about these. We are aware of the inconsistencies and will make refinements over time, while the performance improvements are compelling in at least some major browsers (internal issue 313). * Move handcoded validity statements from +vk.xml+ into the Specification body, easing work in the single-branch model. Specify the distinction between these explicit statements, and the implicit validity statements inferred from vk.xml. Validity statements now appear in two blocks for each command and structure - handcoded "Valid Usage" and the implicit "Valid Usage (Implicit)" (internal issue 392). * Add the +returnedonly="false"+ attribute to WSI output structures, removing incorrectly generated implicit validity statements for slink:VkDisplayPropertiesKHR, slink:VkDisplayPlanePropertiesKHR, slink:VkDisplayModePropertiesKHR, slink:VkDisplayPlaneCapabilitiesKHR, slink:VkSurfaceCapabilitiesKHR, and slink:VkSurfaceFormatKHR structures (internal issue 486). * Update slink:VkImageLayout to require the ename:VK_IMAGE_USAGE_SAMPLED_BIT be set for sampled depth/stencil images (internal issue 487). * Use an explicit format specifier string for the date command invocation in the +Makefile+ instead of the shorthand -R option, which doesn't work on BSD and MaxOS X date commands (internal issue 500). Other Issues: * Use the terms ``allocation scope'' and ``extension scope'' instead of just ``scope'', and add them to the glossary.
2016-10-01 04:13:37 +00:00
ename:VK_FILTER_CUBIC_IMG, pname:anisotropyEnable must: be
ename:VK_FALSE
endif::VK_IMG_filter_cubic[]
****
Change log for July 10, 2016 Vulkan 1.0.20 spec update: * Bump API patch number and header version number to 20 for this update. Github Issues: * Replaced existing reference pages by text automatically extracted from the specification source, or generated from vk.xml in some cases. This isn't a complete solution for the reference pages, but puts them in a much better state. The ref pages (only) are now placed under a CC BY open source license, which is more current than the obsolete license previously used. Further improvements to the pages should not edit them directly, but instead concentrate on the specification source from which the ref pages are being extracted (public issues 44, 55, 160; internal issue 389).
2016-07-11 01:13:41 +00:00
include::../validity/structs/VkSamplerCreateInfo.txt[]
Change log for June 4, 2017 Vulkan 1.0.51 spec update: * Bump API patch number and header version number to 51 for this update. Github Issues: * Add Valid Usage statement to flink:vkCmdResolveImage to require that source and destination image formats match (public issue 492). * Specify that a code:char* parameter must: be a valid null-terminated string in the <<fundamentals-implicit-validity, implicit valid usage>> section (public issue 494). * Removed unnecessary VU for slink:VkPhysicalDeviceFeatures which is covered by ename:VK_ERROR_FEATURE_NOT_PRESENT already (public issue 496). * Clarify valid usage of pname:pQueueFamilyIndices in slink:VkBufferCreateInfo, slink:VkImageCreateInfo, and slink:VkSwapchainCreateInfoKHR (public issue 501). * Document that dependencies of enabled extensions must also be enabled in the <<extended-functionality-extensions-dependencies, Extension Dependencies>> section (public issue 507). Internal Issues: * Change slink:VkMappedMemoryRange valid usage to allow pname:offset + pname:size == size of the allocation. Also, if ename:VK_WHOLE_SIZE is used, require the end of the mapping to be aligned to a multiple of pname:nonCoherentAtomSize (internal issue 611). * Add issue to `VK_KHR_win32_surface` about reusing window objects from a different graphics API or Vulkan ICD (internal issue 639). * Require locations on user in/out in `GL_KHR_vulkan_glsl` (internal issue 783). * Added version info to the json validation output, and updated the schema to match (internal issue 838). * Restructure enumerated type descriptions separately from the command or structure they are used in, allowing better reference page generation (internal issue 841). * Re-sort extension appendices to be in alphabetical order within each author ID section. * Fix enum naming and clarify behavior for `VK_NVX_device_generated_commands` extension. New Extensions:
2017-06-05 03:48:43 +00:00
// refBegin VkFilter Specify filters used for texture lookups
Possible values of the slink:VkSamplerCreateInfo::pname:magFilter and
pname:minFilter parameters, specifying filters used for texture lookups,
are:
include::../api/enums/VkFilter.txt[]
* ename:VK_FILTER_NEAREST specifies nearest filtering.
* ename:VK_FILTER_LINEAR specifies linear filtering.
These filters are described in detail in <<textures-texel-filtering, Texel
Filtering>>.
// refEnd VkFilter
// refBegin VkSamplerMipmapMode Specify mipmap mode used for texture lookups
Possible values of the slink:VkSamplerCreateInfo::pname:mipmapMode,
specifying the mipmap mode used for texture lookups, are:
include::../api/enums/VkSamplerMipmapMode.txt[]
* ename:VK_SAMPLER_MIPMAP_MODE_NEAREST specifies nearest filtering.
* ename:VK_SAMPLER_MIPMAP_MODE_LINEAR specifies linear filtering.
These modes are described in detail in <<textures-texel-filtering, Texel
Filtering>>.
// refEnd VkSamplerMipmapMode
// refBegin VkSamplerAddressMode Specify behavior of sampling with texture coordinates outside an image
Possible values of the slink:VkSamplerCreateInfo::ptext:addressMode*
parameters, specifying the behavior of sampling with coordinates outside the
range [eq]#[0,1]# for the respective [eq]#u#, [eq]#v#, or [eq]#w# coordinate
as defined in the <<textures-wrapping-operation, Wrapping Operation>>
section, are:
include::../api/enums/VkSamplerAddressMode.txt[]
* ename:VK_SAMPLER_ADDRESS_MODE_REPEAT specifies that the repeat wrap mode
will be used.
* ename:VK_SAMPLER_ADDRESS_MODE_MIRRORED_REPEAT specifies that the
mirrored repeat wrap mode will be used.
* ename:VK_SAMPLER_ADDRESS_MODE_CLAMP_TO_EDGE specifies that the clamp to
edge wrap mode will be used.
* ename:VK_SAMPLER_ADDRESS_MODE_CLAMP_TO_BORDER specifies that the clamp
to border wrap mode will be used.
* ename:VK_SAMPLER_ADDRESS_MODE_MIRROR_CLAMP_TO_EDGE specifies that the
mirror clamp to edge wrap mode will be used.
This is only valid if the +VK_KHR_mirror_clamp_to_edge+ extension is
enabled.
// refEnd VkSamplerAddressMode
// refBegin VkBorderColor Specify border color used for texture lookups
Possible values of slink:VkSamplerCreateInfo::pname:borderColor, specifying
the border color used for texture lookups, are:
include::../api/enums/VkBorderColor.txt[]
* ename:VK_BORDER_COLOR_FLOAT_TRANSPARENT_BLACK specifies a transparent,
floating-point format, black color.
* ename:VK_BORDER_COLOR_INT_TRANSPARENT_BLACK specifies a transparent,
integer format, black color.
* ename:VK_BORDER_COLOR_FLOAT_OPAQUE_BLACK specifies an opaque,
floating-point format, black color.
* ename:VK_BORDER_COLOR_INT_OPAQUE_BLACK specifies an opaque, integer
format, black color.
* ename:VK_BORDER_COLOR_FLOAT_OPAQUE_WHITE specifies an opaque,
floating-point format, white color.
* ename:VK_BORDER_COLOR_INT_OPAQUE_WHITE specifies an opaque, integer
format, white color.
These colors are described in detail in <<textures-texel-replacement, Texel
Replacement>>.
// refEnd VkBorderColor
Change log for July 10, 2016 Vulkan 1.0.20 spec update: * Bump API patch number and header version number to 20 for this update. Github Issues: * Replaced existing reference pages by text automatically extracted from the specification source, or generated from vk.xml in some cases. This isn't a complete solution for the reference pages, but puts them in a much better state. The ref pages (only) are now placed under a CC BY open source license, which is more current than the obsolete license previously used. Further improvements to the pages should not edit them directly, but instead concentrate on the specification source from which the ref pages are being extracted (public issues 44, 55, 160; internal issue 389).
2016-07-11 01:13:41 +00:00
// refBegin vkDestroySampler Destroy a sampler object
Vulkan 1.0 branch 1.0 for release
2016-02-16 09:53:44 +00:00
To destroy a sampler, call:
Change log for July 22, 2016 Vulkan 1.0.22 spec update: * Bump API patch number and header version number to 22 for this update. Github Issues: * Translate the subpass self-dependency language into concrete validity statements, and added a validity statement about the restrictions on layout parameters (public issue 267). * Add validity requirement that slink:VkAttachmentDescription::pname:finalLayout and slink:VkAttachmentReference::pname:layout must not be ename:VK_IMAGE_LAYOUT_UNDEFINED or ename:VK_IMAGE_LAYOUT_PREINITIALIZED (public issue 268). * Clarify that slink:VkSubpassDescription::pname:pResolveAttachments layouts are used. Make language consistent with other attachment arrays (public issue 270). * Changed 64-bit definition for dname:VK_DEFINE_NON_DISPATCHABLE_HANDLE to work for x32 platform in +vk.xml+ and the resulting +vulkan.h+ (public issue 282). * Add missing error return code for flink:vkEnumerateInstanceExtensionProperties and flink:vkEnumerateDeviceExtensionProperties (public issue 285) * Fix several cases of stext::VkStructName.memberName markup to stext::VkStructName::pname:memberName, to match other usage in the spec, and describe this markup in the style guide (public issue 286). * Modified validity language generation script to avoid redundant common ancestor language if covered by generic parent language, and used `Both' instead of `Each' when appropriate (public issue 288). Internal Issues: * Add language about behavior of flink:vkAllocateDescriptorSets when allocation fails due to fragmentation, a new error ename:VK_ERROR_FRAGMENTED_POOL, and a Note explaining the situation (internal issue 309). * For the features of code:PointSize, code:ClipDistance, and code:CullDistance, the SPIR-V capability is required to be declared on use (read or write) rather than on decoration (internal issue 359). * Have desktop versions of GLSL respect precision qualification (code:mediump and code:lowp) when compiling for Vulkan. These will get translated to SPIR-V's code:RelaxedPrecision decoration as they do with OpenGL ES versions of GLSL (ESSL). The default precision of all types is code:highp when using a desktop version (internal issue 360). * Add validity statement for slink:VkImageCreateInfo specifying that multisampled images must be two-dimensional, optimally tiled, and with a single mipmap level (internal issue 369). * Add validity statements to slink:VkImageViewCreateInfo disallowing creation of images or image views with no supported features. Made some slink:VkImageViewCreateInfo validity statements more precise and consistent. Added a Note to the <<features,features>> chapter about formats with no features (internal issue 371). * Remove +manpages+ from default build targets. Nroff outputs containing imbedded latexmath will not render properly. Fixing this is a lot of work for limited use cases (internal issue 401). Other Commits: * Fix flink:vkRenderPassBeginInfo::pname:clearValueCount validity statement to be based on attachment indices rather than the number of cleared attachments (Vulkan-LoaderAndValidationLayers/issues/601). * Convert registry documentation from LaTeX to asciidoc source and rename from +src/spec/readme.tex+ to +src/spec/registry.txt+. * Fix lack of Oxford commas in validity language. * Lots of cleanup of generator scripts and Makefiles to move extension list for generator into the script arguments instead of the body of genvk.py, and express better dependencies between XML, scripts, and generated files.
2016-07-23 10:15:48 +00:00
include::../api/protos/vkDestroySampler.txt[]
Vulkan 1.0 branch 1.0 for release
2016-02-16 09:53:44 +00:00
* pname:device is the logical device that destroys the sampler.
* pname:sampler is the sampler to destroy.
* pname:pAllocator controls host memory allocation as described in the
<<memory-allocation, Memory Allocation>> chapter.
Change log for September 30, 2016 Vulkan 1.0.29 spec update: * Bump API patch number and header version number to 29 for this update. Github Issues: * Remove redundant constraint on slink:VkCommandBufferInheritanceInfo::pname:queryFlags (public issue 224). * Fix typo and remove link in Note in the <<extended-functionality-instance-extensions-and-devices, Instance Extensions and Device Extensions>> section (public issue 359). * Fix erroneous validation statement for the pname:layout member of slink:VkComputePipelineCreateInfo (public issue 362). Internal Issues: * Restore long figure captions using asciidoc sidebar blocks, due to restrictions of asciidoc syntax (internal issue 101). * Replace most latexmath equations with comparable markup in straight asciidoc, which significantly improves time required to fully load and process the HTML forms of the Specification. There are known minor font and alignment inconsistencies with MathJax and PDF rendering of latexmath equations. Please do not file github issues about these. We are aware of the inconsistencies and will make refinements over time, while the performance improvements are compelling in at least some major browsers (internal issue 313). * Move handcoded validity statements from +vk.xml+ into the Specification body, easing work in the single-branch model. Specify the distinction between these explicit statements, and the implicit validity statements inferred from vk.xml. Validity statements now appear in two blocks for each command and structure - handcoded "Valid Usage" and the implicit "Valid Usage (Implicit)" (internal issue 392). * Add the +returnedonly="false"+ attribute to WSI output structures, removing incorrectly generated implicit validity statements for slink:VkDisplayPropertiesKHR, slink:VkDisplayPlanePropertiesKHR, slink:VkDisplayModePropertiesKHR, slink:VkDisplayPlaneCapabilitiesKHR, slink:VkSurfaceCapabilitiesKHR, and slink:VkSurfaceFormatKHR structures (internal issue 486). * Update slink:VkImageLayout to require the ename:VK_IMAGE_USAGE_SAMPLED_BIT be set for sampled depth/stencil images (internal issue 487). * Use an explicit format specifier string for the date command invocation in the +Makefile+ instead of the shorthand -R option, which doesn't work on BSD and MaxOS X date commands (internal issue 500). Other Issues: * Use the terms ``allocation scope'' and ``extension scope'' instead of just ``scope'', and add them to the glossary.
2016-10-01 04:13:37 +00:00
.Valid Usage
****
Change log for May 20, 2017 Vulkan 1.0.50 spec update: * Bump API patch number and header version number to 50 for this update. Github Issues: * Fix numerous minor issues with the VK_EXT_debug_report extension (public issues 478, 483, 486, 489, 490). Internal Issues: * Update flink:vkAllocateDescriptorSets to specify conditions under which to return ename:VK_ERROR_FRAGMENTED_POOL or ename:VK_ERROR_OUT_OF_POOL_MEMORY instead of out-of-host/out-of-device-memory, and improve the <<fundamentals-errorcodes, description of those errors (internal issue 654). * Add a NOTE documenting that flink:vkAcquireNextImageKHR can only signal a single semaphore, and how to deal with that when multiple physical devices in a logical device need to wait on it (internal issue 730). * Improve description of pname:pNext chains of slink:VkPhysicalDeviceImageFormatInfo2KHR and slink:VkImageFormatProperties2KHR (internal issue 814). * Clean up math markup issues in the <<textures, Image Operations>> chapter (internal issue 818). * Update validusage target to use more robust code for preprocessing, by making direct use of Asciidoctor's preprocessor. Added uniqueItems check to JSON vu schema and add clean_validusage target (internal issue 826). * Update style guide to prohibit writing non-self-contained (on a single bullet point) Valid Usage statements, and modify offending Valid Usage statements in the Specification to match, to assist with automatic extraction for the validation layers (internal issue 828). * Add ename:VK_VALIDATION_CHECK_SHADERS_EXT to elink:VkValidationCheckEXT of the `VK_EXT_validation_flags` extension, to selectively disable shader validation. * Remove duplicate valid usage statement for slink:VkImageMemoryBarrier. * Modify reflow.py script to place VUID tag anchors standalone on a line following their corresponding bullet point, and reflow the spec text accordingly (this had been pending since the initial tag deployment). New Extensions: * `VK_AMD_texture_gather_bias_lod`
2017-05-21 00:00:50 +00:00
* [[VUID-vkDestroySampler-sampler-01082]]
All submitted commands that refer to pname:sampler must: have completed
Change log for September 30, 2016 Vulkan 1.0.29 spec update: * Bump API patch number and header version number to 29 for this update. Github Issues: * Remove redundant constraint on slink:VkCommandBufferInheritanceInfo::pname:queryFlags (public issue 224). * Fix typo and remove link in Note in the <<extended-functionality-instance-extensions-and-devices, Instance Extensions and Device Extensions>> section (public issue 359). * Fix erroneous validation statement for the pname:layout member of slink:VkComputePipelineCreateInfo (public issue 362). Internal Issues: * Restore long figure captions using asciidoc sidebar blocks, due to restrictions of asciidoc syntax (internal issue 101). * Replace most latexmath equations with comparable markup in straight asciidoc, which significantly improves time required to fully load and process the HTML forms of the Specification. There are known minor font and alignment inconsistencies with MathJax and PDF rendering of latexmath equations. Please do not file github issues about these. We are aware of the inconsistencies and will make refinements over time, while the performance improvements are compelling in at least some major browsers (internal issue 313). * Move handcoded validity statements from +vk.xml+ into the Specification body, easing work in the single-branch model. Specify the distinction between these explicit statements, and the implicit validity statements inferred from vk.xml. Validity statements now appear in two blocks for each command and structure - handcoded "Valid Usage" and the implicit "Valid Usage (Implicit)" (internal issue 392). * Add the +returnedonly="false"+ attribute to WSI output structures, removing incorrectly generated implicit validity statements for slink:VkDisplayPropertiesKHR, slink:VkDisplayPlanePropertiesKHR, slink:VkDisplayModePropertiesKHR, slink:VkDisplayPlaneCapabilitiesKHR, slink:VkSurfaceCapabilitiesKHR, and slink:VkSurfaceFormatKHR structures (internal issue 486). * Update slink:VkImageLayout to require the ename:VK_IMAGE_USAGE_SAMPLED_BIT be set for sampled depth/stencil images (internal issue 487). * Use an explicit format specifier string for the date command invocation in the +Makefile+ instead of the shorthand -R option, which doesn't work on BSD and MaxOS X date commands (internal issue 500). Other Issues: * Use the terms ``allocation scope'' and ``extension scope'' instead of just ``scope'', and add them to the glossary.
2016-10-01 04:13:37 +00:00
execution
Change log for May 20, 2017 Vulkan 1.0.50 spec update: * Bump API patch number and header version number to 50 for this update. Github Issues: * Fix numerous minor issues with the VK_EXT_debug_report extension (public issues 478, 483, 486, 489, 490). Internal Issues: * Update flink:vkAllocateDescriptorSets to specify conditions under which to return ename:VK_ERROR_FRAGMENTED_POOL or ename:VK_ERROR_OUT_OF_POOL_MEMORY instead of out-of-host/out-of-device-memory, and improve the <<fundamentals-errorcodes, description of those errors (internal issue 654). * Add a NOTE documenting that flink:vkAcquireNextImageKHR can only signal a single semaphore, and how to deal with that when multiple physical devices in a logical device need to wait on it (internal issue 730). * Improve description of pname:pNext chains of slink:VkPhysicalDeviceImageFormatInfo2KHR and slink:VkImageFormatProperties2KHR (internal issue 814). * Clean up math markup issues in the <<textures, Image Operations>> chapter (internal issue 818). * Update validusage target to use more robust code for preprocessing, by making direct use of Asciidoctor's preprocessor. Added uniqueItems check to JSON vu schema and add clean_validusage target (internal issue 826). * Update style guide to prohibit writing non-self-contained (on a single bullet point) Valid Usage statements, and modify offending Valid Usage statements in the Specification to match, to assist with automatic extraction for the validation layers (internal issue 828). * Add ename:VK_VALIDATION_CHECK_SHADERS_EXT to elink:VkValidationCheckEXT of the `VK_EXT_validation_flags` extension, to selectively disable shader validation. * Remove duplicate valid usage statement for slink:VkImageMemoryBarrier. * Modify reflow.py script to place VUID tag anchors standalone on a line following their corresponding bullet point, and reflow the spec text accordingly (this had been pending since the initial tag deployment). New Extensions: * `VK_AMD_texture_gather_bias_lod`
2017-05-21 00:00:50 +00:00
* [[VUID-vkDestroySampler-sampler-01083]]
If sname:VkAllocationCallbacks were provided when pname:sampler was
Change log for September 30, 2016 Vulkan 1.0.29 spec update: * Bump API patch number and header version number to 29 for this update. Github Issues: * Remove redundant constraint on slink:VkCommandBufferInheritanceInfo::pname:queryFlags (public issue 224). * Fix typo and remove link in Note in the <<extended-functionality-instance-extensions-and-devices, Instance Extensions and Device Extensions>> section (public issue 359). * Fix erroneous validation statement for the pname:layout member of slink:VkComputePipelineCreateInfo (public issue 362). Internal Issues: * Restore long figure captions using asciidoc sidebar blocks, due to restrictions of asciidoc syntax (internal issue 101). * Replace most latexmath equations with comparable markup in straight asciidoc, which significantly improves time required to fully load and process the HTML forms of the Specification. There are known minor font and alignment inconsistencies with MathJax and PDF rendering of latexmath equations. Please do not file github issues about these. We are aware of the inconsistencies and will make refinements over time, while the performance improvements are compelling in at least some major browsers (internal issue 313). * Move handcoded validity statements from +vk.xml+ into the Specification body, easing work in the single-branch model. Specify the distinction between these explicit statements, and the implicit validity statements inferred from vk.xml. Validity statements now appear in two blocks for each command and structure - handcoded "Valid Usage" and the implicit "Valid Usage (Implicit)" (internal issue 392). * Add the +returnedonly="false"+ attribute to WSI output structures, removing incorrectly generated implicit validity statements for slink:VkDisplayPropertiesKHR, slink:VkDisplayPlanePropertiesKHR, slink:VkDisplayModePropertiesKHR, slink:VkDisplayPlaneCapabilitiesKHR, slink:VkSurfaceCapabilitiesKHR, and slink:VkSurfaceFormatKHR structures (internal issue 486). * Update slink:VkImageLayout to require the ename:VK_IMAGE_USAGE_SAMPLED_BIT be set for sampled depth/stencil images (internal issue 487). * Use an explicit format specifier string for the date command invocation in the +Makefile+ instead of the shorthand -R option, which doesn't work on BSD and MaxOS X date commands (internal issue 500). Other Issues: * Use the terms ``allocation scope'' and ``extension scope'' instead of just ``scope'', and add them to the glossary.
2016-10-01 04:13:37 +00:00
created, a compatible set of callbacks must: be provided here
Change log for May 20, 2017 Vulkan 1.0.50 spec update: * Bump API patch number and header version number to 50 for this update. Github Issues: * Fix numerous minor issues with the VK_EXT_debug_report extension (public issues 478, 483, 486, 489, 490). Internal Issues: * Update flink:vkAllocateDescriptorSets to specify conditions under which to return ename:VK_ERROR_FRAGMENTED_POOL or ename:VK_ERROR_OUT_OF_POOL_MEMORY instead of out-of-host/out-of-device-memory, and improve the <<fundamentals-errorcodes, description of those errors (internal issue 654). * Add a NOTE documenting that flink:vkAcquireNextImageKHR can only signal a single semaphore, and how to deal with that when multiple physical devices in a logical device need to wait on it (internal issue 730). * Improve description of pname:pNext chains of slink:VkPhysicalDeviceImageFormatInfo2KHR and slink:VkImageFormatProperties2KHR (internal issue 814). * Clean up math markup issues in the <<textures, Image Operations>> chapter (internal issue 818). * Update validusage target to use more robust code for preprocessing, by making direct use of Asciidoctor's preprocessor. Added uniqueItems check to JSON vu schema and add clean_validusage target (internal issue 826). * Update style guide to prohibit writing non-self-contained (on a single bullet point) Valid Usage statements, and modify offending Valid Usage statements in the Specification to match, to assist with automatic extraction for the validation layers (internal issue 828). * Add ename:VK_VALIDATION_CHECK_SHADERS_EXT to elink:VkValidationCheckEXT of the `VK_EXT_validation_flags` extension, to selectively disable shader validation. * Remove duplicate valid usage statement for slink:VkImageMemoryBarrier. * Modify reflow.py script to place VUID tag anchors standalone on a line following their corresponding bullet point, and reflow the spec text accordingly (this had been pending since the initial tag deployment). New Extensions: * `VK_AMD_texture_gather_bias_lod`
2017-05-21 00:00:50 +00:00
* [[VUID-vkDestroySampler-sampler-01084]]
If no sname:VkAllocationCallbacks were provided when pname:sampler was
Change log for September 30, 2016 Vulkan 1.0.29 spec update: * Bump API patch number and header version number to 29 for this update. Github Issues: * Remove redundant constraint on slink:VkCommandBufferInheritanceInfo::pname:queryFlags (public issue 224). * Fix typo and remove link in Note in the <<extended-functionality-instance-extensions-and-devices, Instance Extensions and Device Extensions>> section (public issue 359). * Fix erroneous validation statement for the pname:layout member of slink:VkComputePipelineCreateInfo (public issue 362). Internal Issues: * Restore long figure captions using asciidoc sidebar blocks, due to restrictions of asciidoc syntax (internal issue 101). * Replace most latexmath equations with comparable markup in straight asciidoc, which significantly improves time required to fully load and process the HTML forms of the Specification. There are known minor font and alignment inconsistencies with MathJax and PDF rendering of latexmath equations. Please do not file github issues about these. We are aware of the inconsistencies and will make refinements over time, while the performance improvements are compelling in at least some major browsers (internal issue 313). * Move handcoded validity statements from +vk.xml+ into the Specification body, easing work in the single-branch model. Specify the distinction between these explicit statements, and the implicit validity statements inferred from vk.xml. Validity statements now appear in two blocks for each command and structure - handcoded "Valid Usage" and the implicit "Valid Usage (Implicit)" (internal issue 392). * Add the +returnedonly="false"+ attribute to WSI output structures, removing incorrectly generated implicit validity statements for slink:VkDisplayPropertiesKHR, slink:VkDisplayPlanePropertiesKHR, slink:VkDisplayModePropertiesKHR, slink:VkDisplayPlaneCapabilitiesKHR, slink:VkSurfaceCapabilitiesKHR, and slink:VkSurfaceFormatKHR structures (internal issue 486). * Update slink:VkImageLayout to require the ename:VK_IMAGE_USAGE_SAMPLED_BIT be set for sampled depth/stencil images (internal issue 487). * Use an explicit format specifier string for the date command invocation in the +Makefile+ instead of the shorthand -R option, which doesn't work on BSD and MaxOS X date commands (internal issue 500). Other Issues: * Use the terms ``allocation scope'' and ``extension scope'' instead of just ``scope'', and add them to the glossary.
2016-10-01 04:13:37 +00:00
created, pname:pAllocator must: be `NULL`
****
Vulkan 1.0 branch 1.0 for release
2016-02-16 09:53:44 +00:00
include::../validity/protos/vkDestroySampler.txt[]