status-im
/
Vulkan-Docs
mirror of https://github.com/status-im/Vulkan-Docs.git
2
0
Fork 0
Code Issues Projects Releases Wiki Activity
Vulkan-Docs/doc/specs/vulkan/chapters/clears.txt

479 lines
20 KiB
Plaintext
Raw Normal View History

Change log for January 23, 2017 Vulkan 1.0.39 spec update: * Bump API patch number and header version number to 39 for this update. Github Issues: * Clarified that only accesses via the specified buffer/image subresource ranges are included in the access scopes (public issue 306). * Add missing valid usage statements for flink:vkCreateComputePipelines and flink:vkCreateGraphicsPipelines (public issue 427). Internal Issues: * Add a Note to the <<invariance,Invariance>> appendix about a difference between OpenGL and Vulkan with regards to how primitives derived from offsets are handled (internal issue 355). * Add the +<<VK_KHR_get_physical_device_properties2>>+, +<<VK_KHR_maintenance1>>+, and +<<VK_KHR_shader_draw_parameters>>+ extensions (internal issue 448). * Add the +<<VK_EXT_shader_subgroup_vote>>+ and +<<VK_EXT_shader_subgroup_ballot>>+ extensions (internal issue 449). * Update the texture level-of-detail equation in the <<textures-scale-factor,Scale Factor Operation>> section to better approximate the ellipse major and minor axes (internal issue 547). * Forbid non-explicitly allowed uses of interface decorations in the introduction to the <<interfaces,Shader Interfaces>> chapter (internal issue 607). * Replace use of MathJax with KaTeX, for improved load-time performance as well as avoiding the scrolling-and-scrolling behavior due to MathJax asynchronous rendering when loading at an anchor inside the spec. This change also requires moving to HTML5 output for the spec instead of XHTML, and there is a visible difference in that the chapter navigation index is now in a scrollable sidebar instead of at the top of the document. We may or may not retain the nav sidebar based on feedback (internal issue 613). * Improve consistency of markup and formatting in extension appendices (internal issue 631). Other Issues: * Add explicit valid usage statements to slink:VkImageCopy requiring that the source and destination layer ranges be contained in their respective source and destination images. * Add valid usage language for swapchain of flink:vkAcquireNextImage. If the swapchain has been replaced, then it should not be passed to flink:vkAcquireNextImage. * Add a valid usage statement to flink:vkCreateImageView, that the image must have been created with an appropriate usage bit set. * Noted that slink:VkDisplayPresentInfoKHR is a valid extension of slink:VkPresentInfoKHR in the <<wsi_swapchain,WSI Swapchain>> section. * Update valid usage for flink:vkCmdSetViewport and flink:vkCmdSetScissor to account for the multiple viewport feature. If the feature is not enabled, the parameters for these functions have required values that are defined in the <<features-features-multiViewport,multiple viewports>> section of the spec but were not reflected in the valid usage text for these functions. * Add the +<<VK_EXT_swapchain_colorspace>>+ extension defining common color spaces.
2017-01-18 04:11:25 +00:00
// Copyright (c) 2015-2017 The Khronos Group Inc.
Vulkan 1.0 branch 1.0 for release
2016-02-16 09:53:44 +00:00
// Copyright notice at https://www.khronos.org/registry/speccopyright.html
[[clears]]
= Clear Commands
[[clears-outside]]
== Clearing Images Outside A Render Pass Instance
Color and depth/stencil images can: be cleared outside a render pass
instance using flink:vkCmdClearColorImage or
Change log for September 23, 2016 Vulkan 1.0.28 spec update: * Bump API patch number and header version number to 28 for this update. Github Issues: * Minor spelling and typography cleanup, add definitions of ename:VK_FALSE and ename:VK_TRUE as just what their names say (public issues 220, 318, 325, 365; internal issues 451, 496) * Clarify that the pname:maxDescriptorSet limits in the <<features-limits-required,Required Limits>> table are n * maxPerStage limit (where n=number of supported stages) (public issue 254). * Minor cleanup to <<boilerplate-platform-macros,Platform-Specific Macro Definitions>> appendix (public issue 314). * Add valid usage statement to slink:VkPipelineLayoutCreateInfo disallowing multiple push constant ranges for the same shader stage (public issue 340). * Clarify the elink:VkSharingMode description of what executing the "same" barriers means in case of ownership transfer (public issue 347). * Rename copyright.txt and add COPYING.md to try and reduce confusion about applicable copyrights (public issue 350). * Extend the table in the <<boilerplate-wsi-header, Window System-Specific Header Control>> section to describe the external headers included when each etext:VK_USE_PLATFORM_* macro is defined (public issue 376). Internal Issues: * Add "Revision History" to the PDF outputs following the table of contents, to match HTML outputs (internal issue 43). * Clarified that flink:vkMapMemory may fail due to virtual address space limitations (internal issue 346). * Add +refBody+ comment markup for ref page autoextraction when required (internal issue 400). * Document proper use of "mipmap" and "mip" in the style guide API naming rules, matching the spelling rules (internal issue 471). * Tweak the <<extensions,Layers and Extensions>> appendix to note that the Specification may be built with arbitrary combinations of extensions (internal issue 483). * Remove incorrect statement allowing slink:VkClearAttachment::pname:colorAttachment to be >= slink:VkSubpassDescription::pname:colorAttachmentCount (internal issue 488). * The <<features-limits-viewportboundsrange,viewportBoundsRange>> is expressed in terms of the pname:maxViewportDimensions but this is actually two values. Clarify that it's based on the larger of the two (if they differ) (internal issue 499). Other Issues: * Reflowed text of the entire spec using the 'reflow' Makefile gater, to (hopefully) reduce future internal git churn as edits are made and extensions added in return for one-time pain. This has no perceptible change on the spec outputs but considerable changes on the asciidoc source (internal issue 367).
2016-09-24 07:58:11 +00:00
flink:vkCmdClearDepthStencilImage, respectively.
These commands are only allowed outside of a render pass instance.
Vulkan 1.0 branch 1.0 for release
2016-02-16 09:53:44 +00:00
Change log for September 16, 2016 Vulkan 1.0.27 spec update: * Bump API patch number and header version number to 27 for this update. Github Issues: * Weaken flink:vkGetPipelineCacheData invariance conditions; previous conditions were stronger than agreed and can't be guaranteed (public issue 280). * Add link to "Vulkan Loader Specification and Architecture Overview" document to Normative References section (public issue 359). Internal Issues: * Be more clear in the <<interfaces-resources-layout-std140, uniform buffer layout>> section that block offsets can be out of order (internal issue 396). * Document that extension authors should add support for their extensions to the validation layers (internal issue 398). * Clarify that the valid range of depth clear values should be limited to the 0..1 range and that copies to depth aspect must also be in this range (internal issue 412). * Specify ``a'' vs. ``an'' use in the style guide (internal issue 432). * Increase the maximum pname:nonCoherentAtomSize value in the <<features-limits-required,Required Limits>> section from 128 to 256 (internal issue 435). * Fix vk_platform.h for compiler errors on some Android platforms (internal issue 441). * Clarify that slink:VkPhysicalDeviceFeatures::pname:pEnabledFeatures == `NULL` disables all features, including the "required" feature pname:robustBufferAccess (internal issue 479). Other Issues: * Expand style guide and make it more self-consistent. * Use ISO 8601 date format everywhere. * Emphasise the correct way of using slink:VkSurfaceCapabilitiesKHR::pname:maxImageCount. * Added +VK_EXT_validation_flags+ extension for validation flag mechanism. * Fix an <<credits,author credit>> to include their current employer.
2016-09-17 04:22:17 +00:00
// refBegin vkCmdClearColorImage Clear regions of a color image
Change log for July 10, 2016 Vulkan 1.0.20 spec update: * Bump API patch number and header version number to 20 for this update. Github Issues: * Replaced existing reference pages by text automatically extracted from the specification source, or generated from vk.xml in some cases. This isn't a complete solution for the reference pages, but puts them in a much better state. The ref pages (only) are now placed under a CC BY open source license, which is more current than the obsolete license previously used. Further improvements to the pages should not edit them directly, but instead concentrate on the specification source from which the ref pages are being extracted (public issues 44, 55, 160; internal issue 389).
2016-07-11 01:13:41 +00:00
Vulkan 1.0 branch 1.0 for release
2016-02-16 09:53:44 +00:00
To clear one or more subranges of a color image, call:
Change log for July 22, 2016 Vulkan 1.0.22 spec update: * Bump API patch number and header version number to 22 for this update. Github Issues: * Translate the subpass self-dependency language into concrete validity statements, and added a validity statement about the restrictions on layout parameters (public issue 267). * Add validity requirement that slink:VkAttachmentDescription::pname:finalLayout and slink:VkAttachmentReference::pname:layout must not be ename:VK_IMAGE_LAYOUT_UNDEFINED or ename:VK_IMAGE_LAYOUT_PREINITIALIZED (public issue 268). * Clarify that slink:VkSubpassDescription::pname:pResolveAttachments layouts are used. Make language consistent with other attachment arrays (public issue 270). * Changed 64-bit definition for dname:VK_DEFINE_NON_DISPATCHABLE_HANDLE to work for x32 platform in +vk.xml+ and the resulting +vulkan.h+ (public issue 282). * Add missing error return code for flink:vkEnumerateInstanceExtensionProperties and flink:vkEnumerateDeviceExtensionProperties (public issue 285) * Fix several cases of stext::VkStructName.memberName markup to stext::VkStructName::pname:memberName, to match other usage in the spec, and describe this markup in the style guide (public issue 286). * Modified validity language generation script to avoid redundant common ancestor language if covered by generic parent language, and used `Both' instead of `Each' when appropriate (public issue 288). Internal Issues: * Add language about behavior of flink:vkAllocateDescriptorSets when allocation fails due to fragmentation, a new error ename:VK_ERROR_FRAGMENTED_POOL, and a Note explaining the situation (internal issue 309). * For the features of code:PointSize, code:ClipDistance, and code:CullDistance, the SPIR-V capability is required to be declared on use (read or write) rather than on decoration (internal issue 359). * Have desktop versions of GLSL respect precision qualification (code:mediump and code:lowp) when compiling for Vulkan. These will get translated to SPIR-V's code:RelaxedPrecision decoration as they do with OpenGL ES versions of GLSL (ESSL). The default precision of all types is code:highp when using a desktop version (internal issue 360). * Add validity statement for slink:VkImageCreateInfo specifying that multisampled images must be two-dimensional, optimally tiled, and with a single mipmap level (internal issue 369). * Add validity statements to slink:VkImageViewCreateInfo disallowing creation of images or image views with no supported features. Made some slink:VkImageViewCreateInfo validity statements more precise and consistent. Added a Note to the <<features,features>> chapter about formats with no features (internal issue 371). * Remove +manpages+ from default build targets. Nroff outputs containing imbedded latexmath will not render properly. Fixing this is a lot of work for limited use cases (internal issue 401). Other Commits: * Fix flink:vkRenderPassBeginInfo::pname:clearValueCount validity statement to be based on attachment indices rather than the number of cleared attachments (Vulkan-LoaderAndValidationLayers/issues/601). * Convert registry documentation from LaTeX to asciidoc source and rename from +src/spec/readme.tex+ to +src/spec/registry.txt+. * Fix lack of Oxford commas in validity language. * Lots of cleanup of generator scripts and Makefiles to move extension list for generator into the script arguments instead of the body of genvk.py, and express better dependencies between XML, scripts, and generated files.
2016-07-23 10:15:48 +00:00
include::../api/protos/vkCmdClearColorImage.txt[]
Vulkan 1.0 branch 1.0 for release
2016-02-16 09:53:44 +00:00
* pname:commandBuffer is the command buffer into which the command will be
recorded.
* pname:image is the image to be cleared.
* pname:imageLayout specifies the current layout of the image subresource
Change log for May 12, 2017 Vulkan 1.0.49 spec update: * Bump API patch number and header version number to 49 for this update. Github Issues: * Modify reference page extraction script to make internal links to spec anchors refer to the core specification instead of being dangling links (public issue 455). * Fix GL_KHR_vulkan_glsl typo and add a nor-normative mapping to the newly published StorageBuffer class (public issue 466). * Both flink:vkEnumerateInstanceExtensionProperties and flink:vkEnumerateDeviceExtensionProperties return ename:VK_ERROR_LAYER_NOT_PRESENT, which covers the error case of an application providing a layer name that wasn't returned by ftext:vkEnumerate{Instance|Device}LayerProperties (public issue 487). * The specification for flink:VkApplicationInfo::apiVersion says that the driver must return ename:VK_ERROR_INCOMPATIBLE_DRIVER in the case that pname:apiVersion specifies a non-supported version. That means that the valid usage should not also state that, and so the VU statement is removed. The VU had language about "`an effective substitute`" that would have been lost, and so it was moved to the pname:apiVersion description (public issue 488). Internal Issues: * Modify implicit validity generator script to assign asciidoc anchors to all valid usage statements it generates, and reflow.py script to insert Valid Usage ID (VUID) tags into the specification source files for explicit valid usage statements. This has no semantic effects on the specification, but will support the validation layer's detection of valid usage violations and allow it to link into the corresponding part of the specification (internal issue 583). * Assign VUID tags to all explicit VU statements and document the process and tag format in the style guide (internal issue 583). * Clarify the rules of whether to structure new functionality as instance extensions, device extensions, or both in the <<extended-functionality-instance-extensions-and-devices, Instance Extensions and Device Extensions>> section (internal issue 749). * Require that SPIR-V run-time arrays are only used with the code:BufferBlock decoration (internal issue 750). * Fix implicit and explicit valid usage statements for slink:VkWriteDescriptorSet::pname:dstSet (internal issue 767) * Fix SPIR-V code sample for ename:VK_DESCRIPTOR_TYPE_UNIFORM_TEXEL_BUFFER in the <<descriptorsets-uniformtexelbuffer, Uniform Texel Buffer>> section (internal issue 770). * Clarify that disabling depth testing also disables depth writes in the <<fragops-ds-state, Depth and Stencil Operations>> section (internal issue 775). * flink:VkDescriptorImageInfo::pname:imageLayout must match the actual imageLayout at the time the image is accessed. This was in the spec text, but needed an associated valid usage statement. * Note that only 32-bit atomic operations are supported in the <<spirvenv-module-validation, Validation Rules within a Module>> section. * Note that code:UniformConstant variables must not have initializers in the <<spirvenv-module-validation, Validation Rules within a Module>> section. * Add a new elink:VkObjectType enumeration to the core API, promoted from elink:VkDebugObjectTypeEXT, since it is used for much more than just the debug_report extension. New Extensions: * `VK_KHR_get_surface_capabilities2` * `VK_KHR_shared_presentable_image`
2017-05-12 08:37:16 +00:00
ranges to be cleared, and must: be
ifdef::VK_KHR_shared_presentable_image[]
ename:VK_IMAGE_LAYOUT_SHARED_PRESENT_KHR,
endif::VK_KHR_shared_presentable_image[]
ename:VK_IMAGE_LAYOUT_GENERAL or
Vulkan 1.0 branch 1.0 for release
2016-02-16 09:53:44 +00:00
ename:VK_IMAGE_LAYOUT_TRANSFER_DST_OPTIMAL.
* pname:pColor is a pointer to a slink:VkClearColorValue structure that
contains the values the image subresource ranges will be cleared to (see
<<clears-values>> below).
Change log for April 15, 2016 Vulkan 1.0.10 spec update: * Bump API patch number and header version number to 10 for this update. Github Issues: * Slightly tweak the <<memory-allocation,Host Memory>> allocator language so that an application wrapping the standard C alloc/free/realloc functions is still correct - the previous language was too strong with regards to freeing memory. Also made certain scenarios clearer - an implementation may now continue without error if an allocation failed and it is able to continue correctly (public issue 21). * Require that etext:VK_*_CREATE_SPARSE_BINDING_BIT is set when the corresponding etext:VK_*_CREATE_SPARSE_RESIDENCY_BIT is used, in the <<sparsememory-miptail,Mip Tail Regions>> section and related commands flink:vkCreateBuffer and flink:vkCreateImage (public issue 84). * Update the <<features,Features, Limits, and Formats>> chapter to clarify interactions between optional features and dynamic state for the pname:depthBiasClamp and pname:wideLines features (public issue 89). * Describe the code:WorkgroupSize builtin in the <<interfaces-builtin-variables,Built-In Variables>> section, and update the <<compute-shaders,Compute Shaders>> section to further clarify how to set the number of workgroups to execute in a compute shader (public issue 145). * Use the term *image subresource* everywhere instead of *subresource*, except for the special case of *host-accessible subresource*, which may be either an image subresource or buffer range (public issue 120) * Add a note to the <<features,Features, Limits, and Formats>> section about extensibility of structures (Public issue 165). * Fix return code flink:vkAcquireNextImageKHR when the timeout parameter is 0 to ename:VK_NOT_READY instead of ename:VK_TIMEOUT (public issue 170). * Fix typo in slink:VkLayerProperties::pname:apiVersion field (public issue 172). Internal Issues: * Fix a few minor internally-detected typos. * Minor formatting tweaks to pseudocode in the <<resources,Resource Creation>> chapter (internal issue 179). * Fix typo in the definition of point sampling for elink:VkCullModeFlagBits (internal issue 268).
2016-04-14 08:58:49 +00:00
* pname:rangeCount is the number of image subresource range structures in
Vulkan 1.0 branch 1.0 for release
2016-02-16 09:53:44 +00:00
pname:pRanges.
* pname:pRanges points to an array of slink:VkImageSubresourceRange
structures that describe a range of mipmap levels, array layers, and
aspects to be cleared, as described in <<resources-image-views,Image
Change log for September 23, 2016 Vulkan 1.0.28 spec update: * Bump API patch number and header version number to 28 for this update. Github Issues: * Minor spelling and typography cleanup, add definitions of ename:VK_FALSE and ename:VK_TRUE as just what their names say (public issues 220, 318, 325, 365; internal issues 451, 496) * Clarify that the pname:maxDescriptorSet limits in the <<features-limits-required,Required Limits>> table are n * maxPerStage limit (where n=number of supported stages) (public issue 254). * Minor cleanup to <<boilerplate-platform-macros,Platform-Specific Macro Definitions>> appendix (public issue 314). * Add valid usage statement to slink:VkPipelineLayoutCreateInfo disallowing multiple push constant ranges for the same shader stage (public issue 340). * Clarify the elink:VkSharingMode description of what executing the "same" barriers means in case of ownership transfer (public issue 347). * Rename copyright.txt and add COPYING.md to try and reduce confusion about applicable copyrights (public issue 350). * Extend the table in the <<boilerplate-wsi-header, Window System-Specific Header Control>> section to describe the external headers included when each etext:VK_USE_PLATFORM_* macro is defined (public issue 376). Internal Issues: * Add "Revision History" to the PDF outputs following the table of contents, to match HTML outputs (internal issue 43). * Clarified that flink:vkMapMemory may fail due to virtual address space limitations (internal issue 346). * Add +refBody+ comment markup for ref page autoextraction when required (internal issue 400). * Document proper use of "mipmap" and "mip" in the style guide API naming rules, matching the spelling rules (internal issue 471). * Tweak the <<extensions,Layers and Extensions>> appendix to note that the Specification may be built with arbitrary combinations of extensions (internal issue 483). * Remove incorrect statement allowing slink:VkClearAttachment::pname:colorAttachment to be >= slink:VkSubpassDescription::pname:colorAttachmentCount (internal issue 488). * The <<features-limits-viewportboundsrange,viewportBoundsRange>> is expressed in terms of the pname:maxViewportDimensions but this is actually two values. Clarify that it's based on the larger of the two (if they differ) (internal issue 499). Other Issues: * Reflowed text of the entire spec using the 'reflow' Makefile gater, to (hopefully) reduce future internal git churn as edits are made and extensions added in return for one-time pain. This has no perceptible change on the spec outputs but considerable changes on the asciidoc source (internal issue 367).
2016-09-24 07:58:11 +00:00
Views>>.
The pname:aspectMask of all image subresource ranges must: only include
ename:VK_IMAGE_ASPECT_COLOR_BIT.
Vulkan 1.0 branch 1.0 for release
2016-02-16 09:53:44 +00:00
Each specified range in pname:pRanges is cleared to the value specified by
pname:pColor.
Change log for September 30, 2016 Vulkan 1.0.29 spec update: * Bump API patch number and header version number to 29 for this update. Github Issues: * Remove redundant constraint on slink:VkCommandBufferInheritanceInfo::pname:queryFlags (public issue 224). * Fix typo and remove link in Note in the <<extended-functionality-instance-extensions-and-devices, Instance Extensions and Device Extensions>> section (public issue 359). * Fix erroneous validation statement for the pname:layout member of slink:VkComputePipelineCreateInfo (public issue 362). Internal Issues: * Restore long figure captions using asciidoc sidebar blocks, due to restrictions of asciidoc syntax (internal issue 101). * Replace most latexmath equations with comparable markup in straight asciidoc, which significantly improves time required to fully load and process the HTML forms of the Specification. There are known minor font and alignment inconsistencies with MathJax and PDF rendering of latexmath equations. Please do not file github issues about these. We are aware of the inconsistencies and will make refinements over time, while the performance improvements are compelling in at least some major browsers (internal issue 313). * Move handcoded validity statements from +vk.xml+ into the Specification body, easing work in the single-branch model. Specify the distinction between these explicit statements, and the implicit validity statements inferred from vk.xml. Validity statements now appear in two blocks for each command and structure - handcoded "Valid Usage" and the implicit "Valid Usage (Implicit)" (internal issue 392). * Add the +returnedonly="false"+ attribute to WSI output structures, removing incorrectly generated implicit validity statements for slink:VkDisplayPropertiesKHR, slink:VkDisplayPlanePropertiesKHR, slink:VkDisplayModePropertiesKHR, slink:VkDisplayPlaneCapabilitiesKHR, slink:VkSurfaceCapabilitiesKHR, and slink:VkSurfaceFormatKHR structures (internal issue 486). * Update slink:VkImageLayout to require the ename:VK_IMAGE_USAGE_SAMPLED_BIT be set for sampled depth/stencil images (internal issue 487). * Use an explicit format specifier string for the date command invocation in the +Makefile+ instead of the shorthand -R option, which doesn't work on BSD and MaxOS X date commands (internal issue 500). Other Issues: * Use the terms ``allocation scope'' and ``extension scope'' instead of just ``scope'', and add them to the glossary.
2016-10-01 04:13:37 +00:00
.Valid Usage
****
Change log for January 23, 2017 Vulkan 1.0.39 spec update: * Bump API patch number and header version number to 39 for this update. Github Issues: * Clarified that only accesses via the specified buffer/image subresource ranges are included in the access scopes (public issue 306). * Add missing valid usage statements for flink:vkCreateComputePipelines and flink:vkCreateGraphicsPipelines (public issue 427). Internal Issues: * Add a Note to the <<invariance,Invariance>> appendix about a difference between OpenGL and Vulkan with regards to how primitives derived from offsets are handled (internal issue 355). * Add the +<<VK_KHR_get_physical_device_properties2>>+, +<<VK_KHR_maintenance1>>+, and +<<VK_KHR_shader_draw_parameters>>+ extensions (internal issue 448). * Add the +<<VK_EXT_shader_subgroup_vote>>+ and +<<VK_EXT_shader_subgroup_ballot>>+ extensions (internal issue 449). * Update the texture level-of-detail equation in the <<textures-scale-factor,Scale Factor Operation>> section to better approximate the ellipse major and minor axes (internal issue 547). * Forbid non-explicitly allowed uses of interface decorations in the introduction to the <<interfaces,Shader Interfaces>> chapter (internal issue 607). * Replace use of MathJax with KaTeX, for improved load-time performance as well as avoiding the scrolling-and-scrolling behavior due to MathJax asynchronous rendering when loading at an anchor inside the spec. This change also requires moving to HTML5 output for the spec instead of XHTML, and there is a visible difference in that the chapter navigation index is now in a scrollable sidebar instead of at the top of the document. We may or may not retain the nav sidebar based on feedback (internal issue 613). * Improve consistency of markup and formatting in extension appendices (internal issue 631). Other Issues: * Add explicit valid usage statements to slink:VkImageCopy requiring that the source and destination layer ranges be contained in their respective source and destination images. * Add valid usage language for swapchain of flink:vkAcquireNextImage. If the swapchain has been replaced, then it should not be passed to flink:vkAcquireNextImage. * Add a valid usage statement to flink:vkCreateImageView, that the image must have been created with an appropriate usage bit set. * Noted that slink:VkDisplayPresentInfoKHR is a valid extension of slink:VkPresentInfoKHR in the <<wsi_swapchain,WSI Swapchain>> section. * Update valid usage for flink:vkCmdSetViewport and flink:vkCmdSetScissor to account for the multiple viewport feature. If the feature is not enabled, the parameters for these functions have required values that are defined in the <<features-features-multiViewport,multiple viewports>> section of the spec but were not reflected in the valid usage text for these functions. * Add the +<<VK_EXT_swapchain_colorspace>>+ extension defining common color spaces.
2017-01-18 04:11:25 +00:00
ifdef::VK_KHR_maintenance1[]
Change log for May 20, 2017 Vulkan 1.0.50 spec update: * Bump API patch number and header version number to 50 for this update. Github Issues: * Fix numerous minor issues with the VK_EXT_debug_report extension (public issues 478, 483, 486, 489, 490). Internal Issues: * Update flink:vkAllocateDescriptorSets to specify conditions under which to return ename:VK_ERROR_FRAGMENTED_POOL or ename:VK_ERROR_OUT_OF_POOL_MEMORY instead of out-of-host/out-of-device-memory, and improve the <<fundamentals-errorcodes, description of those errors (internal issue 654). * Add a NOTE documenting that flink:vkAcquireNextImageKHR can only signal a single semaphore, and how to deal with that when multiple physical devices in a logical device need to wait on it (internal issue 730). * Improve description of pname:pNext chains of slink:VkPhysicalDeviceImageFormatInfo2KHR and slink:VkImageFormatProperties2KHR (internal issue 814). * Clean up math markup issues in the <<textures, Image Operations>> chapter (internal issue 818). * Update validusage target to use more robust code for preprocessing, by making direct use of Asciidoctor's preprocessor. Added uniqueItems check to JSON vu schema and add clean_validusage target (internal issue 826). * Update style guide to prohibit writing non-self-contained (on a single bullet point) Valid Usage statements, and modify offending Valid Usage statements in the Specification to match, to assist with automatic extraction for the validation layers (internal issue 828). * Add ename:VK_VALIDATION_CHECK_SHADERS_EXT to elink:VkValidationCheckEXT of the `VK_EXT_validation_flags` extension, to selectively disable shader validation. * Remove duplicate valid usage statement for slink:VkImageMemoryBarrier. * Modify reflow.py script to place VUID tag anchors standalone on a line following their corresponding bullet point, and reflow the spec text accordingly (this had been pending since the initial tag deployment). New Extensions: * `VK_AMD_texture_gather_bias_lod`
2017-05-21 00:00:50 +00:00
* [[VUID-vkCmdClearColorImage-image-00001]]
pname:image must: use a format that supports
Change log for January 23, 2017 Vulkan 1.0.39 spec update: * Bump API patch number and header version number to 39 for this update. Github Issues: * Clarified that only accesses via the specified buffer/image subresource ranges are included in the access scopes (public issue 306). * Add missing valid usage statements for flink:vkCreateComputePipelines and flink:vkCreateGraphicsPipelines (public issue 427). Internal Issues: * Add a Note to the <<invariance,Invariance>> appendix about a difference between OpenGL and Vulkan with regards to how primitives derived from offsets are handled (internal issue 355). * Add the +<<VK_KHR_get_physical_device_properties2>>+, +<<VK_KHR_maintenance1>>+, and +<<VK_KHR_shader_draw_parameters>>+ extensions (internal issue 448). * Add the +<<VK_EXT_shader_subgroup_vote>>+ and +<<VK_EXT_shader_subgroup_ballot>>+ extensions (internal issue 449). * Update the texture level-of-detail equation in the <<textures-scale-factor,Scale Factor Operation>> section to better approximate the ellipse major and minor axes (internal issue 547). * Forbid non-explicitly allowed uses of interface decorations in the introduction to the <<interfaces,Shader Interfaces>> chapter (internal issue 607). * Replace use of MathJax with KaTeX, for improved load-time performance as well as avoiding the scrolling-and-scrolling behavior due to MathJax asynchronous rendering when loading at an anchor inside the spec. This change also requires moving to HTML5 output for the spec instead of XHTML, and there is a visible difference in that the chapter navigation index is now in a scrollable sidebar instead of at the top of the document. We may or may not retain the nav sidebar based on feedback (internal issue 613). * Improve consistency of markup and formatting in extension appendices (internal issue 631). Other Issues: * Add explicit valid usage statements to slink:VkImageCopy requiring that the source and destination layer ranges be contained in their respective source and destination images. * Add valid usage language for swapchain of flink:vkAcquireNextImage. If the swapchain has been replaced, then it should not be passed to flink:vkAcquireNextImage. * Add a valid usage statement to flink:vkCreateImageView, that the image must have been created with an appropriate usage bit set. * Noted that slink:VkDisplayPresentInfoKHR is a valid extension of slink:VkPresentInfoKHR in the <<wsi_swapchain,WSI Swapchain>> section. * Update valid usage for flink:vkCmdSetViewport and flink:vkCmdSetScissor to account for the multiple viewport feature. If the feature is not enabled, the parameters for these functions have required values that are defined in the <<features-features-multiViewport,multiple viewports>> section of the spec but were not reflected in the valid usage text for these functions. * Add the +<<VK_EXT_swapchain_colorspace>>+ extension defining common color spaces.
2017-01-18 04:11:25 +00:00
ename:VK_FORMAT_FEATURE_TRANSFER_DST_BIT_KHR, which is indicated by
sname:VkFormatProperties::pname:linearTilingFeatures (for linearly tiled
images) or sname:VkFormatProperties::pname:optimalTilingFeatures (for
optimally tiled images) - as returned by
fname:vkGetPhysicalDeviceFormatProperties
endif::VK_KHR_maintenance1[]
Change log for May 20, 2017 Vulkan 1.0.50 spec update: * Bump API patch number and header version number to 50 for this update. Github Issues: * Fix numerous minor issues with the VK_EXT_debug_report extension (public issues 478, 483, 486, 489, 490). Internal Issues: * Update flink:vkAllocateDescriptorSets to specify conditions under which to return ename:VK_ERROR_FRAGMENTED_POOL or ename:VK_ERROR_OUT_OF_POOL_MEMORY instead of out-of-host/out-of-device-memory, and improve the <<fundamentals-errorcodes, description of those errors (internal issue 654). * Add a NOTE documenting that flink:vkAcquireNextImageKHR can only signal a single semaphore, and how to deal with that when multiple physical devices in a logical device need to wait on it (internal issue 730). * Improve description of pname:pNext chains of slink:VkPhysicalDeviceImageFormatInfo2KHR and slink:VkImageFormatProperties2KHR (internal issue 814). * Clean up math markup issues in the <<textures, Image Operations>> chapter (internal issue 818). * Update validusage target to use more robust code for preprocessing, by making direct use of Asciidoctor's preprocessor. Added uniqueItems check to JSON vu schema and add clean_validusage target (internal issue 826). * Update style guide to prohibit writing non-self-contained (on a single bullet point) Valid Usage statements, and modify offending Valid Usage statements in the Specification to match, to assist with automatic extraction for the validation layers (internal issue 828). * Add ename:VK_VALIDATION_CHECK_SHADERS_EXT to elink:VkValidationCheckEXT of the `VK_EXT_validation_flags` extension, to selectively disable shader validation. * Remove duplicate valid usage statement for slink:VkImageMemoryBarrier. * Modify reflow.py script to place VUID tag anchors standalone on a line following their corresponding bullet point, and reflow the spec text accordingly (this had been pending since the initial tag deployment). New Extensions: * `VK_AMD_texture_gather_bias_lod`
2017-05-21 00:00:50 +00:00
* [[VUID-vkCmdClearColorImage-image-00002]]
pname:image must: have been created with
Change log for September 30, 2016 Vulkan 1.0.29 spec update: * Bump API patch number and header version number to 29 for this update. Github Issues: * Remove redundant constraint on slink:VkCommandBufferInheritanceInfo::pname:queryFlags (public issue 224). * Fix typo and remove link in Note in the <<extended-functionality-instance-extensions-and-devices, Instance Extensions and Device Extensions>> section (public issue 359). * Fix erroneous validation statement for the pname:layout member of slink:VkComputePipelineCreateInfo (public issue 362). Internal Issues: * Restore long figure captions using asciidoc sidebar blocks, due to restrictions of asciidoc syntax (internal issue 101). * Replace most latexmath equations with comparable markup in straight asciidoc, which significantly improves time required to fully load and process the HTML forms of the Specification. There are known minor font and alignment inconsistencies with MathJax and PDF rendering of latexmath equations. Please do not file github issues about these. We are aware of the inconsistencies and will make refinements over time, while the performance improvements are compelling in at least some major browsers (internal issue 313). * Move handcoded validity statements from +vk.xml+ into the Specification body, easing work in the single-branch model. Specify the distinction between these explicit statements, and the implicit validity statements inferred from vk.xml. Validity statements now appear in two blocks for each command and structure - handcoded "Valid Usage" and the implicit "Valid Usage (Implicit)" (internal issue 392). * Add the +returnedonly="false"+ attribute to WSI output structures, removing incorrectly generated implicit validity statements for slink:VkDisplayPropertiesKHR, slink:VkDisplayPlanePropertiesKHR, slink:VkDisplayModePropertiesKHR, slink:VkDisplayPlaneCapabilitiesKHR, slink:VkSurfaceCapabilitiesKHR, and slink:VkSurfaceFormatKHR structures (internal issue 486). * Update slink:VkImageLayout to require the ename:VK_IMAGE_USAGE_SAMPLED_BIT be set for sampled depth/stencil images (internal issue 487). * Use an explicit format specifier string for the date command invocation in the +Makefile+ instead of the shorthand -R option, which doesn't work on BSD and MaxOS X date commands (internal issue 500). Other Issues: * Use the terms ``allocation scope'' and ``extension scope'' instead of just ``scope'', and add them to the glossary.
2016-10-01 04:13:37 +00:00
ename:VK_IMAGE_USAGE_TRANSFER_DST_BIT usage flag
Change log for May 20, 2017 Vulkan 1.0.50 spec update: * Bump API patch number and header version number to 50 for this update. Github Issues: * Fix numerous minor issues with the VK_EXT_debug_report extension (public issues 478, 483, 486, 489, 490). Internal Issues: * Update flink:vkAllocateDescriptorSets to specify conditions under which to return ename:VK_ERROR_FRAGMENTED_POOL or ename:VK_ERROR_OUT_OF_POOL_MEMORY instead of out-of-host/out-of-device-memory, and improve the <<fundamentals-errorcodes, description of those errors (internal issue 654). * Add a NOTE documenting that flink:vkAcquireNextImageKHR can only signal a single semaphore, and how to deal with that when multiple physical devices in a logical device need to wait on it (internal issue 730). * Improve description of pname:pNext chains of slink:VkPhysicalDeviceImageFormatInfo2KHR and slink:VkImageFormatProperties2KHR (internal issue 814). * Clean up math markup issues in the <<textures, Image Operations>> chapter (internal issue 818). * Update validusage target to use more robust code for preprocessing, by making direct use of Asciidoctor's preprocessor. Added uniqueItems check to JSON vu schema and add clean_validusage target (internal issue 826). * Update style guide to prohibit writing non-self-contained (on a single bullet point) Valid Usage statements, and modify offending Valid Usage statements in the Specification to match, to assist with automatic extraction for the validation layers (internal issue 828). * Add ename:VK_VALIDATION_CHECK_SHADERS_EXT to elink:VkValidationCheckEXT of the `VK_EXT_validation_flags` extension, to selectively disable shader validation. * Remove duplicate valid usage statement for slink:VkImageMemoryBarrier. * Modify reflow.py script to place VUID tag anchors standalone on a line following their corresponding bullet point, and reflow the spec text accordingly (this had been pending since the initial tag deployment). New Extensions: * `VK_AMD_texture_gather_bias_lod`
2017-05-21 00:00:50 +00:00
* [[VUID-vkCmdClearColorImage-image-00003]]
If pname:image is non-sparse then it must: be bound completely and
Change log for December 10, 2016 Vulkan 1.0.37 spec update: * Bump API patch number and header version number to 37 for this update. Github Issues: * Add usability guarantees on the values returned by flink:vkGetPhysicalDeviceSurfaceCapabilitiesKHR in the slink:VkSurfaceCapabilitiesKHR structure and by flink:vkGetPhysicalDeviceSurfaceFormatsKHR in the pname:pSurfaceFormatCount parameter (public issue 385). * Add elink:VkDebugReportObjectTypeEXT enumerants for new object types introduced by new extensions (public issue 408). * Add +VK_NVX_device_generated_commands+ etext:ACCESS bits and define how they are used (public issue 415). * Fix indentation for slink:VkDebugReportCallbackCreateInfoEXT member descriptions (public issue 419). Internal Issues: * Expand requirements memory binding of non-sparse images and buffers from the <<resources-association,Resource Memory Association>> section into valid usage statements for all of the applicable API calls (internal issue 508). * Explicitly state that valid usage of flink:vkCreateImage requires that flink:vkGetPhysicalDeviceImageFormatProperties would return ename:VK_SUCCESS for the requested image configuration (internal issue 598).
2016-12-11 04:59:58 +00:00
contiguously to a single sname:VkDeviceMemory object
Change log for May 20, 2017 Vulkan 1.0.50 spec update: * Bump API patch number and header version number to 50 for this update. Github Issues: * Fix numerous minor issues with the VK_EXT_debug_report extension (public issues 478, 483, 486, 489, 490). Internal Issues: * Update flink:vkAllocateDescriptorSets to specify conditions under which to return ename:VK_ERROR_FRAGMENTED_POOL or ename:VK_ERROR_OUT_OF_POOL_MEMORY instead of out-of-host/out-of-device-memory, and improve the <<fundamentals-errorcodes, description of those errors (internal issue 654). * Add a NOTE documenting that flink:vkAcquireNextImageKHR can only signal a single semaphore, and how to deal with that when multiple physical devices in a logical device need to wait on it (internal issue 730). * Improve description of pname:pNext chains of slink:VkPhysicalDeviceImageFormatInfo2KHR and slink:VkImageFormatProperties2KHR (internal issue 814). * Clean up math markup issues in the <<textures, Image Operations>> chapter (internal issue 818). * Update validusage target to use more robust code for preprocessing, by making direct use of Asciidoctor's preprocessor. Added uniqueItems check to JSON vu schema and add clean_validusage target (internal issue 826). * Update style guide to prohibit writing non-self-contained (on a single bullet point) Valid Usage statements, and modify offending Valid Usage statements in the Specification to match, to assist with automatic extraction for the validation layers (internal issue 828). * Add ename:VK_VALIDATION_CHECK_SHADERS_EXT to elink:VkValidationCheckEXT of the `VK_EXT_validation_flags` extension, to selectively disable shader validation. * Remove duplicate valid usage statement for slink:VkImageMemoryBarrier. * Modify reflow.py script to place VUID tag anchors standalone on a line following their corresponding bullet point, and reflow the spec text accordingly (this had been pending since the initial tag deployment). New Extensions: * `VK_AMD_texture_gather_bias_lod`
2017-05-21 00:00:50 +00:00
* [[VUID-vkCmdClearColorImage-imageLayout-00004]]
pname:imageLayout must: specify the layout of the image subresource
Change log for September 30, 2016 Vulkan 1.0.29 spec update: * Bump API patch number and header version number to 29 for this update. Github Issues: * Remove redundant constraint on slink:VkCommandBufferInheritanceInfo::pname:queryFlags (public issue 224). * Fix typo and remove link in Note in the <<extended-functionality-instance-extensions-and-devices, Instance Extensions and Device Extensions>> section (public issue 359). * Fix erroneous validation statement for the pname:layout member of slink:VkComputePipelineCreateInfo (public issue 362). Internal Issues: * Restore long figure captions using asciidoc sidebar blocks, due to restrictions of asciidoc syntax (internal issue 101). * Replace most latexmath equations with comparable markup in straight asciidoc, which significantly improves time required to fully load and process the HTML forms of the Specification. There are known minor font and alignment inconsistencies with MathJax and PDF rendering of latexmath equations. Please do not file github issues about these. We are aware of the inconsistencies and will make refinements over time, while the performance improvements are compelling in at least some major browsers (internal issue 313). * Move handcoded validity statements from +vk.xml+ into the Specification body, easing work in the single-branch model. Specify the distinction between these explicit statements, and the implicit validity statements inferred from vk.xml. Validity statements now appear in two blocks for each command and structure - handcoded "Valid Usage" and the implicit "Valid Usage (Implicit)" (internal issue 392). * Add the +returnedonly="false"+ attribute to WSI output structures, removing incorrectly generated implicit validity statements for slink:VkDisplayPropertiesKHR, slink:VkDisplayPlanePropertiesKHR, slink:VkDisplayModePropertiesKHR, slink:VkDisplayPlaneCapabilitiesKHR, slink:VkSurfaceCapabilitiesKHR, and slink:VkSurfaceFormatKHR structures (internal issue 486). * Update slink:VkImageLayout to require the ename:VK_IMAGE_USAGE_SAMPLED_BIT be set for sampled depth/stencil images (internal issue 487). * Use an explicit format specifier string for the date command invocation in the +Makefile+ instead of the shorthand -R option, which doesn't work on BSD and MaxOS X date commands (internal issue 500). Other Issues: * Use the terms ``allocation scope'' and ``extension scope'' instead of just ``scope'', and add them to the glossary.
2016-10-01 04:13:37 +00:00
ranges of pname:image specified in pname:pRanges at the time this
command is executed on a sname:VkDevice
Change log for May 20, 2017 Vulkan 1.0.50 spec update: * Bump API patch number and header version number to 50 for this update. Github Issues: * Fix numerous minor issues with the VK_EXT_debug_report extension (public issues 478, 483, 486, 489, 490). Internal Issues: * Update flink:vkAllocateDescriptorSets to specify conditions under which to return ename:VK_ERROR_FRAGMENTED_POOL or ename:VK_ERROR_OUT_OF_POOL_MEMORY instead of out-of-host/out-of-device-memory, and improve the <<fundamentals-errorcodes, description of those errors (internal issue 654). * Add a NOTE documenting that flink:vkAcquireNextImageKHR can only signal a single semaphore, and how to deal with that when multiple physical devices in a logical device need to wait on it (internal issue 730). * Improve description of pname:pNext chains of slink:VkPhysicalDeviceImageFormatInfo2KHR and slink:VkImageFormatProperties2KHR (internal issue 814). * Clean up math markup issues in the <<textures, Image Operations>> chapter (internal issue 818). * Update validusage target to use more robust code for preprocessing, by making direct use of Asciidoctor's preprocessor. Added uniqueItems check to JSON vu schema and add clean_validusage target (internal issue 826). * Update style guide to prohibit writing non-self-contained (on a single bullet point) Valid Usage statements, and modify offending Valid Usage statements in the Specification to match, to assist with automatic extraction for the validation layers (internal issue 828). * Add ename:VK_VALIDATION_CHECK_SHADERS_EXT to elink:VkValidationCheckEXT of the `VK_EXT_validation_flags` extension, to selectively disable shader validation. * Remove duplicate valid usage statement for slink:VkImageMemoryBarrier. * Modify reflow.py script to place VUID tag anchors standalone on a line following their corresponding bullet point, and reflow the spec text accordingly (this had been pending since the initial tag deployment). New Extensions: * `VK_AMD_texture_gather_bias_lod`
2017-05-21 00:00:50 +00:00
* [[VUID-vkCmdClearColorImage-imageLayout-00005]]
pname:imageLayout must: be
Change log for May 12, 2017 Vulkan 1.0.49 spec update: * Bump API patch number and header version number to 49 for this update. Github Issues: * Modify reference page extraction script to make internal links to spec anchors refer to the core specification instead of being dangling links (public issue 455). * Fix GL_KHR_vulkan_glsl typo and add a nor-normative mapping to the newly published StorageBuffer class (public issue 466). * Both flink:vkEnumerateInstanceExtensionProperties and flink:vkEnumerateDeviceExtensionProperties return ename:VK_ERROR_LAYER_NOT_PRESENT, which covers the error case of an application providing a layer name that wasn't returned by ftext:vkEnumerate{Instance|Device}LayerProperties (public issue 487). * The specification for flink:VkApplicationInfo::apiVersion says that the driver must return ename:VK_ERROR_INCOMPATIBLE_DRIVER in the case that pname:apiVersion specifies a non-supported version. That means that the valid usage should not also state that, and so the VU statement is removed. The VU had language about "`an effective substitute`" that would have been lost, and so it was moved to the pname:apiVersion description (public issue 488). Internal Issues: * Modify implicit validity generator script to assign asciidoc anchors to all valid usage statements it generates, and reflow.py script to insert Valid Usage ID (VUID) tags into the specification source files for explicit valid usage statements. This has no semantic effects on the specification, but will support the validation layer's detection of valid usage violations and allow it to link into the corresponding part of the specification (internal issue 583). * Assign VUID tags to all explicit VU statements and document the process and tag format in the style guide (internal issue 583). * Clarify the rules of whether to structure new functionality as instance extensions, device extensions, or both in the <<extended-functionality-instance-extensions-and-devices, Instance Extensions and Device Extensions>> section (internal issue 749). * Require that SPIR-V run-time arrays are only used with the code:BufferBlock decoration (internal issue 750). * Fix implicit and explicit valid usage statements for slink:VkWriteDescriptorSet::pname:dstSet (internal issue 767) * Fix SPIR-V code sample for ename:VK_DESCRIPTOR_TYPE_UNIFORM_TEXEL_BUFFER in the <<descriptorsets-uniformtexelbuffer, Uniform Texel Buffer>> section (internal issue 770). * Clarify that disabling depth testing also disables depth writes in the <<fragops-ds-state, Depth and Stencil Operations>> section (internal issue 775). * flink:VkDescriptorImageInfo::pname:imageLayout must match the actual imageLayout at the time the image is accessed. This was in the spec text, but needed an associated valid usage statement. * Note that only 32-bit atomic operations are supported in the <<spirvenv-module-validation, Validation Rules within a Module>> section. * Note that code:UniformConstant variables must not have initializers in the <<spirvenv-module-validation, Validation Rules within a Module>> section. * Add a new elink:VkObjectType enumeration to the core API, promoted from elink:VkDebugObjectTypeEXT, since it is used for much more than just the debug_report extension. New Extensions: * `VK_KHR_get_surface_capabilities2` * `VK_KHR_shared_presentable_image`
2017-05-12 08:37:16 +00:00
ifdef::VK_KHR_shared_presentable_image[]
ename:VK_IMAGE_LAYOUT_SHARED_PRESENT_KHR,
endif::VK_KHR_shared_presentable_image[]
ename:VK_IMAGE_LAYOUT_TRANSFER_DST_OPTIMAL or
Change log for September 30, 2016 Vulkan 1.0.29 spec update: * Bump API patch number and header version number to 29 for this update. Github Issues: * Remove redundant constraint on slink:VkCommandBufferInheritanceInfo::pname:queryFlags (public issue 224). * Fix typo and remove link in Note in the <<extended-functionality-instance-extensions-and-devices, Instance Extensions and Device Extensions>> section (public issue 359). * Fix erroneous validation statement for the pname:layout member of slink:VkComputePipelineCreateInfo (public issue 362). Internal Issues: * Restore long figure captions using asciidoc sidebar blocks, due to restrictions of asciidoc syntax (internal issue 101). * Replace most latexmath equations with comparable markup in straight asciidoc, which significantly improves time required to fully load and process the HTML forms of the Specification. There are known minor font and alignment inconsistencies with MathJax and PDF rendering of latexmath equations. Please do not file github issues about these. We are aware of the inconsistencies and will make refinements over time, while the performance improvements are compelling in at least some major browsers (internal issue 313). * Move handcoded validity statements from +vk.xml+ into the Specification body, easing work in the single-branch model. Specify the distinction between these explicit statements, and the implicit validity statements inferred from vk.xml. Validity statements now appear in two blocks for each command and structure - handcoded "Valid Usage" and the implicit "Valid Usage (Implicit)" (internal issue 392). * Add the +returnedonly="false"+ attribute to WSI output structures, removing incorrectly generated implicit validity statements for slink:VkDisplayPropertiesKHR, slink:VkDisplayPlanePropertiesKHR, slink:VkDisplayModePropertiesKHR, slink:VkDisplayPlaneCapabilitiesKHR, slink:VkSurfaceCapabilitiesKHR, and slink:VkSurfaceFormatKHR structures (internal issue 486). * Update slink:VkImageLayout to require the ename:VK_IMAGE_USAGE_SAMPLED_BIT be set for sampled depth/stencil images (internal issue 487). * Use an explicit format specifier string for the date command invocation in the +Makefile+ instead of the shorthand -R option, which doesn't work on BSD and MaxOS X date commands (internal issue 500). Other Issues: * Use the terms ``allocation scope'' and ``extension scope'' instead of just ``scope'', and add them to the glossary.
2016-10-01 04:13:37 +00:00
ename:VK_IMAGE_LAYOUT_GENERAL
Change log for May 20, 2017 Vulkan 1.0.50 spec update: * Bump API patch number and header version number to 50 for this update. Github Issues: * Fix numerous minor issues with the VK_EXT_debug_report extension (public issues 478, 483, 486, 489, 490). Internal Issues: * Update flink:vkAllocateDescriptorSets to specify conditions under which to return ename:VK_ERROR_FRAGMENTED_POOL or ename:VK_ERROR_OUT_OF_POOL_MEMORY instead of out-of-host/out-of-device-memory, and improve the <<fundamentals-errorcodes, description of those errors (internal issue 654). * Add a NOTE documenting that flink:vkAcquireNextImageKHR can only signal a single semaphore, and how to deal with that when multiple physical devices in a logical device need to wait on it (internal issue 730). * Improve description of pname:pNext chains of slink:VkPhysicalDeviceImageFormatInfo2KHR and slink:VkImageFormatProperties2KHR (internal issue 814). * Clean up math markup issues in the <<textures, Image Operations>> chapter (internal issue 818). * Update validusage target to use more robust code for preprocessing, by making direct use of Asciidoctor's preprocessor. Added uniqueItems check to JSON vu schema and add clean_validusage target (internal issue 826). * Update style guide to prohibit writing non-self-contained (on a single bullet point) Valid Usage statements, and modify offending Valid Usage statements in the Specification to match, to assist with automatic extraction for the validation layers (internal issue 828). * Add ename:VK_VALIDATION_CHECK_SHADERS_EXT to elink:VkValidationCheckEXT of the `VK_EXT_validation_flags` extension, to selectively disable shader validation. * Remove duplicate valid usage statement for slink:VkImageMemoryBarrier. * Modify reflow.py script to place VUID tag anchors standalone on a line following their corresponding bullet point, and reflow the spec text accordingly (this had been pending since the initial tag deployment). New Extensions: * `VK_AMD_texture_gather_bias_lod`
2017-05-21 00:00:50 +00:00
* [[VUID-vkCmdClearColorImage-pRanges-00006]]
The image range of any given element of pname:pRanges must: be an image
Change log for September 30, 2016 Vulkan 1.0.29 spec update: * Bump API patch number and header version number to 29 for this update. Github Issues: * Remove redundant constraint on slink:VkCommandBufferInheritanceInfo::pname:queryFlags (public issue 224). * Fix typo and remove link in Note in the <<extended-functionality-instance-extensions-and-devices, Instance Extensions and Device Extensions>> section (public issue 359). * Fix erroneous validation statement for the pname:layout member of slink:VkComputePipelineCreateInfo (public issue 362). Internal Issues: * Restore long figure captions using asciidoc sidebar blocks, due to restrictions of asciidoc syntax (internal issue 101). * Replace most latexmath equations with comparable markup in straight asciidoc, which significantly improves time required to fully load and process the HTML forms of the Specification. There are known minor font and alignment inconsistencies with MathJax and PDF rendering of latexmath equations. Please do not file github issues about these. We are aware of the inconsistencies and will make refinements over time, while the performance improvements are compelling in at least some major browsers (internal issue 313). * Move handcoded validity statements from +vk.xml+ into the Specification body, easing work in the single-branch model. Specify the distinction between these explicit statements, and the implicit validity statements inferred from vk.xml. Validity statements now appear in two blocks for each command and structure - handcoded "Valid Usage" and the implicit "Valid Usage (Implicit)" (internal issue 392). * Add the +returnedonly="false"+ attribute to WSI output structures, removing incorrectly generated implicit validity statements for slink:VkDisplayPropertiesKHR, slink:VkDisplayPlanePropertiesKHR, slink:VkDisplayModePropertiesKHR, slink:VkDisplayPlaneCapabilitiesKHR, slink:VkSurfaceCapabilitiesKHR, and slink:VkSurfaceFormatKHR structures (internal issue 486). * Update slink:VkImageLayout to require the ename:VK_IMAGE_USAGE_SAMPLED_BIT be set for sampled depth/stencil images (internal issue 487). * Use an explicit format specifier string for the date command invocation in the +Makefile+ instead of the shorthand -R option, which doesn't work on BSD and MaxOS X date commands (internal issue 500). Other Issues: * Use the terms ``allocation scope'' and ``extension scope'' instead of just ``scope'', and add them to the glossary.
2016-10-01 04:13:37 +00:00
subresource range that is contained within pname:image
Change log for May 20, 2017 Vulkan 1.0.50 spec update: * Bump API patch number and header version number to 50 for this update. Github Issues: * Fix numerous minor issues with the VK_EXT_debug_report extension (public issues 478, 483, 486, 489, 490). Internal Issues: * Update flink:vkAllocateDescriptorSets to specify conditions under which to return ename:VK_ERROR_FRAGMENTED_POOL or ename:VK_ERROR_OUT_OF_POOL_MEMORY instead of out-of-host/out-of-device-memory, and improve the <<fundamentals-errorcodes, description of those errors (internal issue 654). * Add a NOTE documenting that flink:vkAcquireNextImageKHR can only signal a single semaphore, and how to deal with that when multiple physical devices in a logical device need to wait on it (internal issue 730). * Improve description of pname:pNext chains of slink:VkPhysicalDeviceImageFormatInfo2KHR and slink:VkImageFormatProperties2KHR (internal issue 814). * Clean up math markup issues in the <<textures, Image Operations>> chapter (internal issue 818). * Update validusage target to use more robust code for preprocessing, by making direct use of Asciidoctor's preprocessor. Added uniqueItems check to JSON vu schema and add clean_validusage target (internal issue 826). * Update style guide to prohibit writing non-self-contained (on a single bullet point) Valid Usage statements, and modify offending Valid Usage statements in the Specification to match, to assist with automatic extraction for the validation layers (internal issue 828). * Add ename:VK_VALIDATION_CHECK_SHADERS_EXT to elink:VkValidationCheckEXT of the `VK_EXT_validation_flags` extension, to selectively disable shader validation. * Remove duplicate valid usage statement for slink:VkImageMemoryBarrier. * Modify reflow.py script to place VUID tag anchors standalone on a line following their corresponding bullet point, and reflow the spec text accordingly (this had been pending since the initial tag deployment). New Extensions: * `VK_AMD_texture_gather_bias_lod`
2017-05-21 00:00:50 +00:00
* [[VUID-vkCmdClearColorImage-image-00007]]
pname:image must: not have a compressed or depth/stencil format
Change log for September 30, 2016 Vulkan 1.0.29 spec update: * Bump API patch number and header version number to 29 for this update. Github Issues: * Remove redundant constraint on slink:VkCommandBufferInheritanceInfo::pname:queryFlags (public issue 224). * Fix typo and remove link in Note in the <<extended-functionality-instance-extensions-and-devices, Instance Extensions and Device Extensions>> section (public issue 359). * Fix erroneous validation statement for the pname:layout member of slink:VkComputePipelineCreateInfo (public issue 362). Internal Issues: * Restore long figure captions using asciidoc sidebar blocks, due to restrictions of asciidoc syntax (internal issue 101). * Replace most latexmath equations with comparable markup in straight asciidoc, which significantly improves time required to fully load and process the HTML forms of the Specification. There are known minor font and alignment inconsistencies with MathJax and PDF rendering of latexmath equations. Please do not file github issues about these. We are aware of the inconsistencies and will make refinements over time, while the performance improvements are compelling in at least some major browsers (internal issue 313). * Move handcoded validity statements from +vk.xml+ into the Specification body, easing work in the single-branch model. Specify the distinction between these explicit statements, and the implicit validity statements inferred from vk.xml. Validity statements now appear in two blocks for each command and structure - handcoded "Valid Usage" and the implicit "Valid Usage (Implicit)" (internal issue 392). * Add the +returnedonly="false"+ attribute to WSI output structures, removing incorrectly generated implicit validity statements for slink:VkDisplayPropertiesKHR, slink:VkDisplayPlanePropertiesKHR, slink:VkDisplayModePropertiesKHR, slink:VkDisplayPlaneCapabilitiesKHR, slink:VkSurfaceCapabilitiesKHR, and slink:VkSurfaceFormatKHR structures (internal issue 486). * Update slink:VkImageLayout to require the ename:VK_IMAGE_USAGE_SAMPLED_BIT be set for sampled depth/stencil images (internal issue 487). * Use an explicit format specifier string for the date command invocation in the +Makefile+ instead of the shorthand -R option, which doesn't work on BSD and MaxOS X date commands (internal issue 500). Other Issues: * Use the terms ``allocation scope'' and ``extension scope'' instead of just ``scope'', and add them to the glossary.
2016-10-01 04:13:37 +00:00
****
Vulkan 1.0 branch 1.0 for release
2016-02-16 09:53:44 +00:00
include::../validity/protos/vkCmdClearColorImage.txt[]
Change log for February 17, 2017 Vulkan 1.0.41 spec update: * Bump API patch number and header version number to 41 for this update. Github Issues: * Made all uses of `NULL` vs. code:VK_NULL_HANDLE consistent (public issue 276). * Clarify render pass compatibility in different usage scenarios (public issues 303 and 304). * Add valid usage statements to slink:VkFramebufferCreateInfo requiring that the width, height, and number of layers of the framebuffer all be nonzero (public issue 432). * Allow `offset` and `align` in any GLSL version for the `GL_KHR_vulkan_glsl` extension (public issue 435). * Specify lifetime of string objects passed to the tlink:PFN_vkDebugReportCallbackEXT user callback in the +VK_EXT_debug_report+ extension (public issue 446). * Fix inter-page links in multi-file reference pages (public issue 454). Internal Issues: * Update valid usage language for slink:VkImageCreateInfo to disallow creating images that have ename:VK_IMAGE_USAGE_TRANSIENT_ATTACHMENT_BIT set without other attachment usage bits (ename:VK_IMAGE_USAGE_INPUT_ATTACHMENT_BIT, ename:VK_IMAGE_USAGE_COLOR_ATTACHMENT_BIT, or ename:VK_IMAGE_USAGE_DEPTH_STENCIL_ATTACHMENT_BIT) (internal issue 540). * Disable `VK_EXT_swapchain_colorspace` extension until internal issues 640 and 661 are mutually resolved. * Allow alternative mipmap level selection when [eq]#lambda == 0.5# during texture <<textures-image-level-selection,Image Level(s) Selection>> (internal issue 680). Other Issues: * Add a clarification to the style guide that the extension revision number is treated as a patch number, so that changes to published extensions should only include bug fixes and spec clarifications.
2017-02-17 11:57:46 +00:00
// refBegin vkCmdClearDepthStencilImage Fill regions of a combined depth/stencil image
Change log for July 10, 2016 Vulkan 1.0.20 spec update: * Bump API patch number and header version number to 20 for this update. Github Issues: * Replaced existing reference pages by text automatically extracted from the specification source, or generated from vk.xml in some cases. This isn't a complete solution for the reference pages, but puts them in a much better state. The ref pages (only) are now placed under a CC BY open source license, which is more current than the obsolete license previously used. Further improvements to the pages should not edit them directly, but instead concentrate on the specification source from which the ref pages are being extracted (public issues 44, 55, 160; internal issue 389).
2016-07-11 01:13:41 +00:00
Vulkan 1.0 branch 1.0 for release
2016-02-16 09:53:44 +00:00
To clear one or more subranges of a depth/stencil image, call:
Change log for July 22, 2016 Vulkan 1.0.22 spec update: * Bump API patch number and header version number to 22 for this update. Github Issues: * Translate the subpass self-dependency language into concrete validity statements, and added a validity statement about the restrictions on layout parameters (public issue 267). * Add validity requirement that slink:VkAttachmentDescription::pname:finalLayout and slink:VkAttachmentReference::pname:layout must not be ename:VK_IMAGE_LAYOUT_UNDEFINED or ename:VK_IMAGE_LAYOUT_PREINITIALIZED (public issue 268). * Clarify that slink:VkSubpassDescription::pname:pResolveAttachments layouts are used. Make language consistent with other attachment arrays (public issue 270). * Changed 64-bit definition for dname:VK_DEFINE_NON_DISPATCHABLE_HANDLE to work for x32 platform in +vk.xml+ and the resulting +vulkan.h+ (public issue 282). * Add missing error return code for flink:vkEnumerateInstanceExtensionProperties and flink:vkEnumerateDeviceExtensionProperties (public issue 285) * Fix several cases of stext::VkStructName.memberName markup to stext::VkStructName::pname:memberName, to match other usage in the spec, and describe this markup in the style guide (public issue 286). * Modified validity language generation script to avoid redundant common ancestor language if covered by generic parent language, and used `Both' instead of `Each' when appropriate (public issue 288). Internal Issues: * Add language about behavior of flink:vkAllocateDescriptorSets when allocation fails due to fragmentation, a new error ename:VK_ERROR_FRAGMENTED_POOL, and a Note explaining the situation (internal issue 309). * For the features of code:PointSize, code:ClipDistance, and code:CullDistance, the SPIR-V capability is required to be declared on use (read or write) rather than on decoration (internal issue 359). * Have desktop versions of GLSL respect precision qualification (code:mediump and code:lowp) when compiling for Vulkan. These will get translated to SPIR-V's code:RelaxedPrecision decoration as they do with OpenGL ES versions of GLSL (ESSL). The default precision of all types is code:highp when using a desktop version (internal issue 360). * Add validity statement for slink:VkImageCreateInfo specifying that multisampled images must be two-dimensional, optimally tiled, and with a single mipmap level (internal issue 369). * Add validity statements to slink:VkImageViewCreateInfo disallowing creation of images or image views with no supported features. Made some slink:VkImageViewCreateInfo validity statements more precise and consistent. Added a Note to the <<features,features>> chapter about formats with no features (internal issue 371). * Remove +manpages+ from default build targets. Nroff outputs containing imbedded latexmath will not render properly. Fixing this is a lot of work for limited use cases (internal issue 401). Other Commits: * Fix flink:vkRenderPassBeginInfo::pname:clearValueCount validity statement to be based on attachment indices rather than the number of cleared attachments (Vulkan-LoaderAndValidationLayers/issues/601). * Convert registry documentation from LaTeX to asciidoc source and rename from +src/spec/readme.tex+ to +src/spec/registry.txt+. * Fix lack of Oxford commas in validity language. * Lots of cleanup of generator scripts and Makefiles to move extension list for generator into the script arguments instead of the body of genvk.py, and express better dependencies between XML, scripts, and generated files.
2016-07-23 10:15:48 +00:00
include::../api/protos/vkCmdClearDepthStencilImage.txt[]
Vulkan 1.0 branch 1.0 for release
2016-02-16 09:53:44 +00:00
* pname:commandBuffer is the command buffer into which the command will be
recorded.
* pname:image is the image to be cleared.
* pname:imageLayout specifies the current layout of the image subresource
ranges to be cleared, and must: be ename:VK_IMAGE_LAYOUT_GENERAL or
ename:VK_IMAGE_LAYOUT_TRANSFER_DST_OPTIMAL.
* pname:pDepthStencil is a pointer to a slink:VkClearDepthStencilValue
structure that contains the values the depth and stencil image
subresource ranges will be cleared to (see <<clears-values>> below).
Change log for April 15, 2016 Vulkan 1.0.10 spec update: * Bump API patch number and header version number to 10 for this update. Github Issues: * Slightly tweak the <<memory-allocation,Host Memory>> allocator language so that an application wrapping the standard C alloc/free/realloc functions is still correct - the previous language was too strong with regards to freeing memory. Also made certain scenarios clearer - an implementation may now continue without error if an allocation failed and it is able to continue correctly (public issue 21). * Require that etext:VK_*_CREATE_SPARSE_BINDING_BIT is set when the corresponding etext:VK_*_CREATE_SPARSE_RESIDENCY_BIT is used, in the <<sparsememory-miptail,Mip Tail Regions>> section and related commands flink:vkCreateBuffer and flink:vkCreateImage (public issue 84). * Update the <<features,Features, Limits, and Formats>> chapter to clarify interactions between optional features and dynamic state for the pname:depthBiasClamp and pname:wideLines features (public issue 89). * Describe the code:WorkgroupSize builtin in the <<interfaces-builtin-variables,Built-In Variables>> section, and update the <<compute-shaders,Compute Shaders>> section to further clarify how to set the number of workgroups to execute in a compute shader (public issue 145). * Use the term *image subresource* everywhere instead of *subresource*, except for the special case of *host-accessible subresource*, which may be either an image subresource or buffer range (public issue 120) * Add a note to the <<features,Features, Limits, and Formats>> section about extensibility of structures (Public issue 165). * Fix return code flink:vkAcquireNextImageKHR when the timeout parameter is 0 to ename:VK_NOT_READY instead of ename:VK_TIMEOUT (public issue 170). * Fix typo in slink:VkLayerProperties::pname:apiVersion field (public issue 172). Internal Issues: * Fix a few minor internally-detected typos. * Minor formatting tweaks to pseudocode in the <<resources,Resource Creation>> chapter (internal issue 179). * Fix typo in the definition of point sampling for elink:VkCullModeFlagBits (internal issue 268).
2016-04-14 08:58:49 +00:00
* pname:rangeCount is the number of image subresource range structures in
Vulkan 1.0 branch 1.0 for release
2016-02-16 09:53:44 +00:00
pname:pRanges.
* pname:pRanges points to an array of slink:VkImageSubresourceRange
structures that describe a range of mipmap levels, array layers, and
aspects to be cleared, as described in <<resources-image-views,Image
Change log for September 23, 2016 Vulkan 1.0.28 spec update: * Bump API patch number and header version number to 28 for this update. Github Issues: * Minor spelling and typography cleanup, add definitions of ename:VK_FALSE and ename:VK_TRUE as just what their names say (public issues 220, 318, 325, 365; internal issues 451, 496) * Clarify that the pname:maxDescriptorSet limits in the <<features-limits-required,Required Limits>> table are n * maxPerStage limit (where n=number of supported stages) (public issue 254). * Minor cleanup to <<boilerplate-platform-macros,Platform-Specific Macro Definitions>> appendix (public issue 314). * Add valid usage statement to slink:VkPipelineLayoutCreateInfo disallowing multiple push constant ranges for the same shader stage (public issue 340). * Clarify the elink:VkSharingMode description of what executing the "same" barriers means in case of ownership transfer (public issue 347). * Rename copyright.txt and add COPYING.md to try and reduce confusion about applicable copyrights (public issue 350). * Extend the table in the <<boilerplate-wsi-header, Window System-Specific Header Control>> section to describe the external headers included when each etext:VK_USE_PLATFORM_* macro is defined (public issue 376). Internal Issues: * Add "Revision History" to the PDF outputs following the table of contents, to match HTML outputs (internal issue 43). * Clarified that flink:vkMapMemory may fail due to virtual address space limitations (internal issue 346). * Add +refBody+ comment markup for ref page autoextraction when required (internal issue 400). * Document proper use of "mipmap" and "mip" in the style guide API naming rules, matching the spelling rules (internal issue 471). * Tweak the <<extensions,Layers and Extensions>> appendix to note that the Specification may be built with arbitrary combinations of extensions (internal issue 483). * Remove incorrect statement allowing slink:VkClearAttachment::pname:colorAttachment to be >= slink:VkSubpassDescription::pname:colorAttachmentCount (internal issue 488). * The <<features-limits-viewportboundsrange,viewportBoundsRange>> is expressed in terms of the pname:maxViewportDimensions but this is actually two values. Clarify that it's based on the larger of the two (if they differ) (internal issue 499). Other Issues: * Reflowed text of the entire spec using the 'reflow' Makefile gater, to (hopefully) reduce future internal git churn as edits are made and extensions added in return for one-time pain. This has no perceptible change on the spec outputs but considerable changes on the asciidoc source (internal issue 367).
2016-09-24 07:58:11 +00:00
Views>>.
The pname:aspectMask of each image subresource range in pname:pRanges
can: include ename:VK_IMAGE_ASPECT_DEPTH_BIT if the image format has a
depth component, and ename:VK_IMAGE_ASPECT_STENCIL_BIT if the image
format has a stencil component.
pname:pDepthStencil is a pointer to a sname:VkClearDepthStencilValue
structure that contains the values the image subresource ranges will be
cleared to (see <<clears-values>> below).
Vulkan 1.0 branch 1.0 for release
2016-02-16 09:53:44 +00:00
Change log for September 30, 2016 Vulkan 1.0.29 spec update: * Bump API patch number and header version number to 29 for this update. Github Issues: * Remove redundant constraint on slink:VkCommandBufferInheritanceInfo::pname:queryFlags (public issue 224). * Fix typo and remove link in Note in the <<extended-functionality-instance-extensions-and-devices, Instance Extensions and Device Extensions>> section (public issue 359). * Fix erroneous validation statement for the pname:layout member of slink:VkComputePipelineCreateInfo (public issue 362). Internal Issues: * Restore long figure captions using asciidoc sidebar blocks, due to restrictions of asciidoc syntax (internal issue 101). * Replace most latexmath equations with comparable markup in straight asciidoc, which significantly improves time required to fully load and process the HTML forms of the Specification. There are known minor font and alignment inconsistencies with MathJax and PDF rendering of latexmath equations. Please do not file github issues about these. We are aware of the inconsistencies and will make refinements over time, while the performance improvements are compelling in at least some major browsers (internal issue 313). * Move handcoded validity statements from +vk.xml+ into the Specification body, easing work in the single-branch model. Specify the distinction between these explicit statements, and the implicit validity statements inferred from vk.xml. Validity statements now appear in two blocks for each command and structure - handcoded "Valid Usage" and the implicit "Valid Usage (Implicit)" (internal issue 392). * Add the +returnedonly="false"+ attribute to WSI output structures, removing incorrectly generated implicit validity statements for slink:VkDisplayPropertiesKHR, slink:VkDisplayPlanePropertiesKHR, slink:VkDisplayModePropertiesKHR, slink:VkDisplayPlaneCapabilitiesKHR, slink:VkSurfaceCapabilitiesKHR, and slink:VkSurfaceFormatKHR structures (internal issue 486). * Update slink:VkImageLayout to require the ename:VK_IMAGE_USAGE_SAMPLED_BIT be set for sampled depth/stencil images (internal issue 487). * Use an explicit format specifier string for the date command invocation in the +Makefile+ instead of the shorthand -R option, which doesn't work on BSD and MaxOS X date commands (internal issue 500). Other Issues: * Use the terms ``allocation scope'' and ``extension scope'' instead of just ``scope'', and add them to the glossary.
2016-10-01 04:13:37 +00:00
.Valid Usage
****
Change log for January 23, 2017 Vulkan 1.0.39 spec update: * Bump API patch number and header version number to 39 for this update. Github Issues: * Clarified that only accesses via the specified buffer/image subresource ranges are included in the access scopes (public issue 306). * Add missing valid usage statements for flink:vkCreateComputePipelines and flink:vkCreateGraphicsPipelines (public issue 427). Internal Issues: * Add a Note to the <<invariance,Invariance>> appendix about a difference between OpenGL and Vulkan with regards to how primitives derived from offsets are handled (internal issue 355). * Add the +<<VK_KHR_get_physical_device_properties2>>+, +<<VK_KHR_maintenance1>>+, and +<<VK_KHR_shader_draw_parameters>>+ extensions (internal issue 448). * Add the +<<VK_EXT_shader_subgroup_vote>>+ and +<<VK_EXT_shader_subgroup_ballot>>+ extensions (internal issue 449). * Update the texture level-of-detail equation in the <<textures-scale-factor,Scale Factor Operation>> section to better approximate the ellipse major and minor axes (internal issue 547). * Forbid non-explicitly allowed uses of interface decorations in the introduction to the <<interfaces,Shader Interfaces>> chapter (internal issue 607). * Replace use of MathJax with KaTeX, for improved load-time performance as well as avoiding the scrolling-and-scrolling behavior due to MathJax asynchronous rendering when loading at an anchor inside the spec. This change also requires moving to HTML5 output for the spec instead of XHTML, and there is a visible difference in that the chapter navigation index is now in a scrollable sidebar instead of at the top of the document. We may or may not retain the nav sidebar based on feedback (internal issue 613). * Improve consistency of markup and formatting in extension appendices (internal issue 631). Other Issues: * Add explicit valid usage statements to slink:VkImageCopy requiring that the source and destination layer ranges be contained in their respective source and destination images. * Add valid usage language for swapchain of flink:vkAcquireNextImage. If the swapchain has been replaced, then it should not be passed to flink:vkAcquireNextImage. * Add a valid usage statement to flink:vkCreateImageView, that the image must have been created with an appropriate usage bit set. * Noted that slink:VkDisplayPresentInfoKHR is a valid extension of slink:VkPresentInfoKHR in the <<wsi_swapchain,WSI Swapchain>> section. * Update valid usage for flink:vkCmdSetViewport and flink:vkCmdSetScissor to account for the multiple viewport feature. If the feature is not enabled, the parameters for these functions have required values that are defined in the <<features-features-multiViewport,multiple viewports>> section of the spec but were not reflected in the valid usage text for these functions. * Add the +<<VK_EXT_swapchain_colorspace>>+ extension defining common color spaces.
2017-01-18 04:11:25 +00:00
ifdef::VK_KHR_maintenance1[]
Change log for May 20, 2017 Vulkan 1.0.50 spec update: * Bump API patch number and header version number to 50 for this update. Github Issues: * Fix numerous minor issues with the VK_EXT_debug_report extension (public issues 478, 483, 486, 489, 490). Internal Issues: * Update flink:vkAllocateDescriptorSets to specify conditions under which to return ename:VK_ERROR_FRAGMENTED_POOL or ename:VK_ERROR_OUT_OF_POOL_MEMORY instead of out-of-host/out-of-device-memory, and improve the <<fundamentals-errorcodes, description of those errors (internal issue 654). * Add a NOTE documenting that flink:vkAcquireNextImageKHR can only signal a single semaphore, and how to deal with that when multiple physical devices in a logical device need to wait on it (internal issue 730). * Improve description of pname:pNext chains of slink:VkPhysicalDeviceImageFormatInfo2KHR and slink:VkImageFormatProperties2KHR (internal issue 814). * Clean up math markup issues in the <<textures, Image Operations>> chapter (internal issue 818). * Update validusage target to use more robust code for preprocessing, by making direct use of Asciidoctor's preprocessor. Added uniqueItems check to JSON vu schema and add clean_validusage target (internal issue 826). * Update style guide to prohibit writing non-self-contained (on a single bullet point) Valid Usage statements, and modify offending Valid Usage statements in the Specification to match, to assist with automatic extraction for the validation layers (internal issue 828). * Add ename:VK_VALIDATION_CHECK_SHADERS_EXT to elink:VkValidationCheckEXT of the `VK_EXT_validation_flags` extension, to selectively disable shader validation. * Remove duplicate valid usage statement for slink:VkImageMemoryBarrier. * Modify reflow.py script to place VUID tag anchors standalone on a line following their corresponding bullet point, and reflow the spec text accordingly (this had been pending since the initial tag deployment). New Extensions: * `VK_AMD_texture_gather_bias_lod`
2017-05-21 00:00:50 +00:00
* [[VUID-vkCmdClearDepthStencilImage-image-00008]]
pname:image must: use a format that supports
Change log for January 23, 2017 Vulkan 1.0.39 spec update: * Bump API patch number and header version number to 39 for this update. Github Issues: * Clarified that only accesses via the specified buffer/image subresource ranges are included in the access scopes (public issue 306). * Add missing valid usage statements for flink:vkCreateComputePipelines and flink:vkCreateGraphicsPipelines (public issue 427). Internal Issues: * Add a Note to the <<invariance,Invariance>> appendix about a difference between OpenGL and Vulkan with regards to how primitives derived from offsets are handled (internal issue 355). * Add the +<<VK_KHR_get_physical_device_properties2>>+, +<<VK_KHR_maintenance1>>+, and +<<VK_KHR_shader_draw_parameters>>+ extensions (internal issue 448). * Add the +<<VK_EXT_shader_subgroup_vote>>+ and +<<VK_EXT_shader_subgroup_ballot>>+ extensions (internal issue 449). * Update the texture level-of-detail equation in the <<textures-scale-factor,Scale Factor Operation>> section to better approximate the ellipse major and minor axes (internal issue 547). * Forbid non-explicitly allowed uses of interface decorations in the introduction to the <<interfaces,Shader Interfaces>> chapter (internal issue 607). * Replace use of MathJax with KaTeX, for improved load-time performance as well as avoiding the scrolling-and-scrolling behavior due to MathJax asynchronous rendering when loading at an anchor inside the spec. This change also requires moving to HTML5 output for the spec instead of XHTML, and there is a visible difference in that the chapter navigation index is now in a scrollable sidebar instead of at the top of the document. We may or may not retain the nav sidebar based on feedback (internal issue 613). * Improve consistency of markup and formatting in extension appendices (internal issue 631). Other Issues: * Add explicit valid usage statements to slink:VkImageCopy requiring that the source and destination layer ranges be contained in their respective source and destination images. * Add valid usage language for swapchain of flink:vkAcquireNextImage. If the swapchain has been replaced, then it should not be passed to flink:vkAcquireNextImage. * Add a valid usage statement to flink:vkCreateImageView, that the image must have been created with an appropriate usage bit set. * Noted that slink:VkDisplayPresentInfoKHR is a valid extension of slink:VkPresentInfoKHR in the <<wsi_swapchain,WSI Swapchain>> section. * Update valid usage for flink:vkCmdSetViewport and flink:vkCmdSetScissor to account for the multiple viewport feature. If the feature is not enabled, the parameters for these functions have required values that are defined in the <<features-features-multiViewport,multiple viewports>> section of the spec but were not reflected in the valid usage text for these functions. * Add the +<<VK_EXT_swapchain_colorspace>>+ extension defining common color spaces.
2017-01-18 04:11:25 +00:00
ename:VK_FORMAT_FEATURE_TRANSFER_DST_BIT_KHR, which is indicated by
sname:VkFormatProperties::pname:linearTilingFeatures (for linearly tiled
images) or sname:VkFormatProperties::pname:optimalTilingFeatures (for
optimally tiled images) - as returned by
fname:vkGetPhysicalDeviceFormatProperties
endif::VK_KHR_maintenance1[]
Change log for May 20, 2017 Vulkan 1.0.50 spec update: * Bump API patch number and header version number to 50 for this update. Github Issues: * Fix numerous minor issues with the VK_EXT_debug_report extension (public issues 478, 483, 486, 489, 490). Internal Issues: * Update flink:vkAllocateDescriptorSets to specify conditions under which to return ename:VK_ERROR_FRAGMENTED_POOL or ename:VK_ERROR_OUT_OF_POOL_MEMORY instead of out-of-host/out-of-device-memory, and improve the <<fundamentals-errorcodes, description of those errors (internal issue 654). * Add a NOTE documenting that flink:vkAcquireNextImageKHR can only signal a single semaphore, and how to deal with that when multiple physical devices in a logical device need to wait on it (internal issue 730). * Improve description of pname:pNext chains of slink:VkPhysicalDeviceImageFormatInfo2KHR and slink:VkImageFormatProperties2KHR (internal issue 814). * Clean up math markup issues in the <<textures, Image Operations>> chapter (internal issue 818). * Update validusage target to use more robust code for preprocessing, by making direct use of Asciidoctor's preprocessor. Added uniqueItems check to JSON vu schema and add clean_validusage target (internal issue 826). * Update style guide to prohibit writing non-self-contained (on a single bullet point) Valid Usage statements, and modify offending Valid Usage statements in the Specification to match, to assist with automatic extraction for the validation layers (internal issue 828). * Add ename:VK_VALIDATION_CHECK_SHADERS_EXT to elink:VkValidationCheckEXT of the `VK_EXT_validation_flags` extension, to selectively disable shader validation. * Remove duplicate valid usage statement for slink:VkImageMemoryBarrier. * Modify reflow.py script to place VUID tag anchors standalone on a line following their corresponding bullet point, and reflow the spec text accordingly (this had been pending since the initial tag deployment). New Extensions: * `VK_AMD_texture_gather_bias_lod`
2017-05-21 00:00:50 +00:00
* [[VUID-vkCmdClearDepthStencilImage-image-00009]]
pname:image must: have been created with
Change log for September 30, 2016 Vulkan 1.0.29 spec update: * Bump API patch number and header version number to 29 for this update. Github Issues: * Remove redundant constraint on slink:VkCommandBufferInheritanceInfo::pname:queryFlags (public issue 224). * Fix typo and remove link in Note in the <<extended-functionality-instance-extensions-and-devices, Instance Extensions and Device Extensions>> section (public issue 359). * Fix erroneous validation statement for the pname:layout member of slink:VkComputePipelineCreateInfo (public issue 362). Internal Issues: * Restore long figure captions using asciidoc sidebar blocks, due to restrictions of asciidoc syntax (internal issue 101). * Replace most latexmath equations with comparable markup in straight asciidoc, which significantly improves time required to fully load and process the HTML forms of the Specification. There are known minor font and alignment inconsistencies with MathJax and PDF rendering of latexmath equations. Please do not file github issues about these. We are aware of the inconsistencies and will make refinements over time, while the performance improvements are compelling in at least some major browsers (internal issue 313). * Move handcoded validity statements from +vk.xml+ into the Specification body, easing work in the single-branch model. Specify the distinction between these explicit statements, and the implicit validity statements inferred from vk.xml. Validity statements now appear in two blocks for each command and structure - handcoded "Valid Usage" and the implicit "Valid Usage (Implicit)" (internal issue 392). * Add the +returnedonly="false"+ attribute to WSI output structures, removing incorrectly generated implicit validity statements for slink:VkDisplayPropertiesKHR, slink:VkDisplayPlanePropertiesKHR, slink:VkDisplayModePropertiesKHR, slink:VkDisplayPlaneCapabilitiesKHR, slink:VkSurfaceCapabilitiesKHR, and slink:VkSurfaceFormatKHR structures (internal issue 486). * Update slink:VkImageLayout to require the ename:VK_IMAGE_USAGE_SAMPLED_BIT be set for sampled depth/stencil images (internal issue 487). * Use an explicit format specifier string for the date command invocation in the +Makefile+ instead of the shorthand -R option, which doesn't work on BSD and MaxOS X date commands (internal issue 500). Other Issues: * Use the terms ``allocation scope'' and ``extension scope'' instead of just ``scope'', and add them to the glossary.
2016-10-01 04:13:37 +00:00
ename:VK_IMAGE_USAGE_TRANSFER_DST_BIT usage flag
Change log for May 20, 2017 Vulkan 1.0.50 spec update: * Bump API patch number and header version number to 50 for this update. Github Issues: * Fix numerous minor issues with the VK_EXT_debug_report extension (public issues 478, 483, 486, 489, 490). Internal Issues: * Update flink:vkAllocateDescriptorSets to specify conditions under which to return ename:VK_ERROR_FRAGMENTED_POOL or ename:VK_ERROR_OUT_OF_POOL_MEMORY instead of out-of-host/out-of-device-memory, and improve the <<fundamentals-errorcodes, description of those errors (internal issue 654). * Add a NOTE documenting that flink:vkAcquireNextImageKHR can only signal a single semaphore, and how to deal with that when multiple physical devices in a logical device need to wait on it (internal issue 730). * Improve description of pname:pNext chains of slink:VkPhysicalDeviceImageFormatInfo2KHR and slink:VkImageFormatProperties2KHR (internal issue 814). * Clean up math markup issues in the <<textures, Image Operations>> chapter (internal issue 818). * Update validusage target to use more robust code for preprocessing, by making direct use of Asciidoctor's preprocessor. Added uniqueItems check to JSON vu schema and add clean_validusage target (internal issue 826). * Update style guide to prohibit writing non-self-contained (on a single bullet point) Valid Usage statements, and modify offending Valid Usage statements in the Specification to match, to assist with automatic extraction for the validation layers (internal issue 828). * Add ename:VK_VALIDATION_CHECK_SHADERS_EXT to elink:VkValidationCheckEXT of the `VK_EXT_validation_flags` extension, to selectively disable shader validation. * Remove duplicate valid usage statement for slink:VkImageMemoryBarrier. * Modify reflow.py script to place VUID tag anchors standalone on a line following their corresponding bullet point, and reflow the spec text accordingly (this had been pending since the initial tag deployment). New Extensions: * `VK_AMD_texture_gather_bias_lod`
2017-05-21 00:00:50 +00:00
* [[VUID-vkCmdClearDepthStencilImage-image-00010]]
If pname:image is non-sparse then it must: be bound completely and
Change log for December 10, 2016 Vulkan 1.0.37 spec update: * Bump API patch number and header version number to 37 for this update. Github Issues: * Add usability guarantees on the values returned by flink:vkGetPhysicalDeviceSurfaceCapabilitiesKHR in the slink:VkSurfaceCapabilitiesKHR structure and by flink:vkGetPhysicalDeviceSurfaceFormatsKHR in the pname:pSurfaceFormatCount parameter (public issue 385). * Add elink:VkDebugReportObjectTypeEXT enumerants for new object types introduced by new extensions (public issue 408). * Add +VK_NVX_device_generated_commands+ etext:ACCESS bits and define how they are used (public issue 415). * Fix indentation for slink:VkDebugReportCallbackCreateInfoEXT member descriptions (public issue 419). Internal Issues: * Expand requirements memory binding of non-sparse images and buffers from the <<resources-association,Resource Memory Association>> section into valid usage statements for all of the applicable API calls (internal issue 508). * Explicitly state that valid usage of flink:vkCreateImage requires that flink:vkGetPhysicalDeviceImageFormatProperties would return ename:VK_SUCCESS for the requested image configuration (internal issue 598).
2016-12-11 04:59:58 +00:00
contiguously to a single sname:VkDeviceMemory object
Change log for May 20, 2017 Vulkan 1.0.50 spec update: * Bump API patch number and header version number to 50 for this update. Github Issues: * Fix numerous minor issues with the VK_EXT_debug_report extension (public issues 478, 483, 486, 489, 490). Internal Issues: * Update flink:vkAllocateDescriptorSets to specify conditions under which to return ename:VK_ERROR_FRAGMENTED_POOL or ename:VK_ERROR_OUT_OF_POOL_MEMORY instead of out-of-host/out-of-device-memory, and improve the <<fundamentals-errorcodes, description of those errors (internal issue 654). * Add a NOTE documenting that flink:vkAcquireNextImageKHR can only signal a single semaphore, and how to deal with that when multiple physical devices in a logical device need to wait on it (internal issue 730). * Improve description of pname:pNext chains of slink:VkPhysicalDeviceImageFormatInfo2KHR and slink:VkImageFormatProperties2KHR (internal issue 814). * Clean up math markup issues in the <<textures, Image Operations>> chapter (internal issue 818). * Update validusage target to use more robust code for preprocessing, by making direct use of Asciidoctor's preprocessor. Added uniqueItems check to JSON vu schema and add clean_validusage target (internal issue 826). * Update style guide to prohibit writing non-self-contained (on a single bullet point) Valid Usage statements, and modify offending Valid Usage statements in the Specification to match, to assist with automatic extraction for the validation layers (internal issue 828). * Add ename:VK_VALIDATION_CHECK_SHADERS_EXT to elink:VkValidationCheckEXT of the `VK_EXT_validation_flags` extension, to selectively disable shader validation. * Remove duplicate valid usage statement for slink:VkImageMemoryBarrier. * Modify reflow.py script to place VUID tag anchors standalone on a line following their corresponding bullet point, and reflow the spec text accordingly (this had been pending since the initial tag deployment). New Extensions: * `VK_AMD_texture_gather_bias_lod`
2017-05-21 00:00:50 +00:00
* [[VUID-vkCmdClearDepthStencilImage-imageLayout-00011]]
pname:imageLayout must: specify the layout of the image subresource
Change log for September 30, 2016 Vulkan 1.0.29 spec update: * Bump API patch number and header version number to 29 for this update. Github Issues: * Remove redundant constraint on slink:VkCommandBufferInheritanceInfo::pname:queryFlags (public issue 224). * Fix typo and remove link in Note in the <<extended-functionality-instance-extensions-and-devices, Instance Extensions and Device Extensions>> section (public issue 359). * Fix erroneous validation statement for the pname:layout member of slink:VkComputePipelineCreateInfo (public issue 362). Internal Issues: * Restore long figure captions using asciidoc sidebar blocks, due to restrictions of asciidoc syntax (internal issue 101). * Replace most latexmath equations with comparable markup in straight asciidoc, which significantly improves time required to fully load and process the HTML forms of the Specification. There are known minor font and alignment inconsistencies with MathJax and PDF rendering of latexmath equations. Please do not file github issues about these. We are aware of the inconsistencies and will make refinements over time, while the performance improvements are compelling in at least some major browsers (internal issue 313). * Move handcoded validity statements from +vk.xml+ into the Specification body, easing work in the single-branch model. Specify the distinction between these explicit statements, and the implicit validity statements inferred from vk.xml. Validity statements now appear in two blocks for each command and structure - handcoded "Valid Usage" and the implicit "Valid Usage (Implicit)" (internal issue 392). * Add the +returnedonly="false"+ attribute to WSI output structures, removing incorrectly generated implicit validity statements for slink:VkDisplayPropertiesKHR, slink:VkDisplayPlanePropertiesKHR, slink:VkDisplayModePropertiesKHR, slink:VkDisplayPlaneCapabilitiesKHR, slink:VkSurfaceCapabilitiesKHR, and slink:VkSurfaceFormatKHR structures (internal issue 486). * Update slink:VkImageLayout to require the ename:VK_IMAGE_USAGE_SAMPLED_BIT be set for sampled depth/stencil images (internal issue 487). * Use an explicit format specifier string for the date command invocation in the +Makefile+ instead of the shorthand -R option, which doesn't work on BSD and MaxOS X date commands (internal issue 500). Other Issues: * Use the terms ``allocation scope'' and ``extension scope'' instead of just ``scope'', and add them to the glossary.
2016-10-01 04:13:37 +00:00
ranges of pname:image specified in pname:pRanges at the time this
command is executed on a sname:VkDevice
Change log for May 20, 2017 Vulkan 1.0.50 spec update: * Bump API patch number and header version number to 50 for this update. Github Issues: * Fix numerous minor issues with the VK_EXT_debug_report extension (public issues 478, 483, 486, 489, 490). Internal Issues: * Update flink:vkAllocateDescriptorSets to specify conditions under which to return ename:VK_ERROR_FRAGMENTED_POOL or ename:VK_ERROR_OUT_OF_POOL_MEMORY instead of out-of-host/out-of-device-memory, and improve the <<fundamentals-errorcodes, description of those errors (internal issue 654). * Add a NOTE documenting that flink:vkAcquireNextImageKHR can only signal a single semaphore, and how to deal with that when multiple physical devices in a logical device need to wait on it (internal issue 730). * Improve description of pname:pNext chains of slink:VkPhysicalDeviceImageFormatInfo2KHR and slink:VkImageFormatProperties2KHR (internal issue 814). * Clean up math markup issues in the <<textures, Image Operations>> chapter (internal issue 818). * Update validusage target to use more robust code for preprocessing, by making direct use of Asciidoctor's preprocessor. Added uniqueItems check to JSON vu schema and add clean_validusage target (internal issue 826). * Update style guide to prohibit writing non-self-contained (on a single bullet point) Valid Usage statements, and modify offending Valid Usage statements in the Specification to match, to assist with automatic extraction for the validation layers (internal issue 828). * Add ename:VK_VALIDATION_CHECK_SHADERS_EXT to elink:VkValidationCheckEXT of the `VK_EXT_validation_flags` extension, to selectively disable shader validation. * Remove duplicate valid usage statement for slink:VkImageMemoryBarrier. * Modify reflow.py script to place VUID tag anchors standalone on a line following their corresponding bullet point, and reflow the spec text accordingly (this had been pending since the initial tag deployment). New Extensions: * `VK_AMD_texture_gather_bias_lod`
2017-05-21 00:00:50 +00:00
* [[VUID-vkCmdClearDepthStencilImage-imageLayout-00012]]
pname:imageLayout must: be either of
Change log for September 30, 2016 Vulkan 1.0.29 spec update: * Bump API patch number and header version number to 29 for this update. Github Issues: * Remove redundant constraint on slink:VkCommandBufferInheritanceInfo::pname:queryFlags (public issue 224). * Fix typo and remove link in Note in the <<extended-functionality-instance-extensions-and-devices, Instance Extensions and Device Extensions>> section (public issue 359). * Fix erroneous validation statement for the pname:layout member of slink:VkComputePipelineCreateInfo (public issue 362). Internal Issues: * Restore long figure captions using asciidoc sidebar blocks, due to restrictions of asciidoc syntax (internal issue 101). * Replace most latexmath equations with comparable markup in straight asciidoc, which significantly improves time required to fully load and process the HTML forms of the Specification. There are known minor font and alignment inconsistencies with MathJax and PDF rendering of latexmath equations. Please do not file github issues about these. We are aware of the inconsistencies and will make refinements over time, while the performance improvements are compelling in at least some major browsers (internal issue 313). * Move handcoded validity statements from +vk.xml+ into the Specification body, easing work in the single-branch model. Specify the distinction between these explicit statements, and the implicit validity statements inferred from vk.xml. Validity statements now appear in two blocks for each command and structure - handcoded "Valid Usage" and the implicit "Valid Usage (Implicit)" (internal issue 392). * Add the +returnedonly="false"+ attribute to WSI output structures, removing incorrectly generated implicit validity statements for slink:VkDisplayPropertiesKHR, slink:VkDisplayPlanePropertiesKHR, slink:VkDisplayModePropertiesKHR, slink:VkDisplayPlaneCapabilitiesKHR, slink:VkSurfaceCapabilitiesKHR, and slink:VkSurfaceFormatKHR structures (internal issue 486). * Update slink:VkImageLayout to require the ename:VK_IMAGE_USAGE_SAMPLED_BIT be set for sampled depth/stencil images (internal issue 487). * Use an explicit format specifier string for the date command invocation in the +Makefile+ instead of the shorthand -R option, which doesn't work on BSD and MaxOS X date commands (internal issue 500). Other Issues: * Use the terms ``allocation scope'' and ``extension scope'' instead of just ``scope'', and add them to the glossary.
2016-10-01 04:13:37 +00:00
ename:VK_IMAGE_LAYOUT_TRANSFER_DST_OPTIMAL or
ename:VK_IMAGE_LAYOUT_GENERAL
Change log for May 20, 2017 Vulkan 1.0.50 spec update: * Bump API patch number and header version number to 50 for this update. Github Issues: * Fix numerous minor issues with the VK_EXT_debug_report extension (public issues 478, 483, 486, 489, 490). Internal Issues: * Update flink:vkAllocateDescriptorSets to specify conditions under which to return ename:VK_ERROR_FRAGMENTED_POOL or ename:VK_ERROR_OUT_OF_POOL_MEMORY instead of out-of-host/out-of-device-memory, and improve the <<fundamentals-errorcodes, description of those errors (internal issue 654). * Add a NOTE documenting that flink:vkAcquireNextImageKHR can only signal a single semaphore, and how to deal with that when multiple physical devices in a logical device need to wait on it (internal issue 730). * Improve description of pname:pNext chains of slink:VkPhysicalDeviceImageFormatInfo2KHR and slink:VkImageFormatProperties2KHR (internal issue 814). * Clean up math markup issues in the <<textures, Image Operations>> chapter (internal issue 818). * Update validusage target to use more robust code for preprocessing, by making direct use of Asciidoctor's preprocessor. Added uniqueItems check to JSON vu schema and add clean_validusage target (internal issue 826). * Update style guide to prohibit writing non-self-contained (on a single bullet point) Valid Usage statements, and modify offending Valid Usage statements in the Specification to match, to assist with automatic extraction for the validation layers (internal issue 828). * Add ename:VK_VALIDATION_CHECK_SHADERS_EXT to elink:VkValidationCheckEXT of the `VK_EXT_validation_flags` extension, to selectively disable shader validation. * Remove duplicate valid usage statement for slink:VkImageMemoryBarrier. * Modify reflow.py script to place VUID tag anchors standalone on a line following their corresponding bullet point, and reflow the spec text accordingly (this had been pending since the initial tag deployment). New Extensions: * `VK_AMD_texture_gather_bias_lod`
2017-05-21 00:00:50 +00:00
* [[VUID-vkCmdClearDepthStencilImage-pRanges-00013]]
The image range of any given element of pname:pRanges must: be an image
Change log for September 30, 2016 Vulkan 1.0.29 spec update: * Bump API patch number and header version number to 29 for this update. Github Issues: * Remove redundant constraint on slink:VkCommandBufferInheritanceInfo::pname:queryFlags (public issue 224). * Fix typo and remove link in Note in the <<extended-functionality-instance-extensions-and-devices, Instance Extensions and Device Extensions>> section (public issue 359). * Fix erroneous validation statement for the pname:layout member of slink:VkComputePipelineCreateInfo (public issue 362). Internal Issues: * Restore long figure captions using asciidoc sidebar blocks, due to restrictions of asciidoc syntax (internal issue 101). * Replace most latexmath equations with comparable markup in straight asciidoc, which significantly improves time required to fully load and process the HTML forms of the Specification. There are known minor font and alignment inconsistencies with MathJax and PDF rendering of latexmath equations. Please do not file github issues about these. We are aware of the inconsistencies and will make refinements over time, while the performance improvements are compelling in at least some major browsers (internal issue 313). * Move handcoded validity statements from +vk.xml+ into the Specification body, easing work in the single-branch model. Specify the distinction between these explicit statements, and the implicit validity statements inferred from vk.xml. Validity statements now appear in two blocks for each command and structure - handcoded "Valid Usage" and the implicit "Valid Usage (Implicit)" (internal issue 392). * Add the +returnedonly="false"+ attribute to WSI output structures, removing incorrectly generated implicit validity statements for slink:VkDisplayPropertiesKHR, slink:VkDisplayPlanePropertiesKHR, slink:VkDisplayModePropertiesKHR, slink:VkDisplayPlaneCapabilitiesKHR, slink:VkSurfaceCapabilitiesKHR, and slink:VkSurfaceFormatKHR structures (internal issue 486). * Update slink:VkImageLayout to require the ename:VK_IMAGE_USAGE_SAMPLED_BIT be set for sampled depth/stencil images (internal issue 487). * Use an explicit format specifier string for the date command invocation in the +Makefile+ instead of the shorthand -R option, which doesn't work on BSD and MaxOS X date commands (internal issue 500). Other Issues: * Use the terms ``allocation scope'' and ``extension scope'' instead of just ``scope'', and add them to the glossary.
2016-10-01 04:13:37 +00:00
subresource range that is contained within pname:image
Change log for May 20, 2017 Vulkan 1.0.50 spec update: * Bump API patch number and header version number to 50 for this update. Github Issues: * Fix numerous minor issues with the VK_EXT_debug_report extension (public issues 478, 483, 486, 489, 490). Internal Issues: * Update flink:vkAllocateDescriptorSets to specify conditions under which to return ename:VK_ERROR_FRAGMENTED_POOL or ename:VK_ERROR_OUT_OF_POOL_MEMORY instead of out-of-host/out-of-device-memory, and improve the <<fundamentals-errorcodes, description of those errors (internal issue 654). * Add a NOTE documenting that flink:vkAcquireNextImageKHR can only signal a single semaphore, and how to deal with that when multiple physical devices in a logical device need to wait on it (internal issue 730). * Improve description of pname:pNext chains of slink:VkPhysicalDeviceImageFormatInfo2KHR and slink:VkImageFormatProperties2KHR (internal issue 814). * Clean up math markup issues in the <<textures, Image Operations>> chapter (internal issue 818). * Update validusage target to use more robust code for preprocessing, by making direct use of Asciidoctor's preprocessor. Added uniqueItems check to JSON vu schema and add clean_validusage target (internal issue 826). * Update style guide to prohibit writing non-self-contained (on a single bullet point) Valid Usage statements, and modify offending Valid Usage statements in the Specification to match, to assist with automatic extraction for the validation layers (internal issue 828). * Add ename:VK_VALIDATION_CHECK_SHADERS_EXT to elink:VkValidationCheckEXT of the `VK_EXT_validation_flags` extension, to selectively disable shader validation. * Remove duplicate valid usage statement for slink:VkImageMemoryBarrier. * Modify reflow.py script to place VUID tag anchors standalone on a line following their corresponding bullet point, and reflow the spec text accordingly (this had been pending since the initial tag deployment). New Extensions: * `VK_AMD_texture_gather_bias_lod`
2017-05-21 00:00:50 +00:00
* [[VUID-vkCmdClearDepthStencilImage-image-00014]]
pname:image must: have a depth/stencil format
Change log for September 30, 2016 Vulkan 1.0.29 spec update: * Bump API patch number and header version number to 29 for this update. Github Issues: * Remove redundant constraint on slink:VkCommandBufferInheritanceInfo::pname:queryFlags (public issue 224). * Fix typo and remove link in Note in the <<extended-functionality-instance-extensions-and-devices, Instance Extensions and Device Extensions>> section (public issue 359). * Fix erroneous validation statement for the pname:layout member of slink:VkComputePipelineCreateInfo (public issue 362). Internal Issues: * Restore long figure captions using asciidoc sidebar blocks, due to restrictions of asciidoc syntax (internal issue 101). * Replace most latexmath equations with comparable markup in straight asciidoc, which significantly improves time required to fully load and process the HTML forms of the Specification. There are known minor font and alignment inconsistencies with MathJax and PDF rendering of latexmath equations. Please do not file github issues about these. We are aware of the inconsistencies and will make refinements over time, while the performance improvements are compelling in at least some major browsers (internal issue 313). * Move handcoded validity statements from +vk.xml+ into the Specification body, easing work in the single-branch model. Specify the distinction between these explicit statements, and the implicit validity statements inferred from vk.xml. Validity statements now appear in two blocks for each command and structure - handcoded "Valid Usage" and the implicit "Valid Usage (Implicit)" (internal issue 392). * Add the +returnedonly="false"+ attribute to WSI output structures, removing incorrectly generated implicit validity statements for slink:VkDisplayPropertiesKHR, slink:VkDisplayPlanePropertiesKHR, slink:VkDisplayModePropertiesKHR, slink:VkDisplayPlaneCapabilitiesKHR, slink:VkSurfaceCapabilitiesKHR, and slink:VkSurfaceFormatKHR structures (internal issue 486). * Update slink:VkImageLayout to require the ename:VK_IMAGE_USAGE_SAMPLED_BIT be set for sampled depth/stencil images (internal issue 487). * Use an explicit format specifier string for the date command invocation in the +Makefile+ instead of the shorthand -R option, which doesn't work on BSD and MaxOS X date commands (internal issue 500). Other Issues: * Use the terms ``allocation scope'' and ``extension scope'' instead of just ``scope'', and add them to the glossary.
2016-10-01 04:13:37 +00:00
****
Vulkan 1.0 branch 1.0 for release
2016-02-16 09:53:44 +00:00
include::../validity/protos/vkCmdClearDepthStencilImage.txt[]
Clears outside render pass instances are treated as transfer operations for
the purposes of memory barriers.
[[clears-inside]]
== Clearing Images Inside A Render Pass Instance
Change log for September 16, 2016 Vulkan 1.0.27 spec update: * Bump API patch number and header version number to 27 for this update. Github Issues: * Weaken flink:vkGetPipelineCacheData invariance conditions; previous conditions were stronger than agreed and can't be guaranteed (public issue 280). * Add link to "Vulkan Loader Specification and Architecture Overview" document to Normative References section (public issue 359). Internal Issues: * Be more clear in the <<interfaces-resources-layout-std140, uniform buffer layout>> section that block offsets can be out of order (internal issue 396). * Document that extension authors should add support for their extensions to the validation layers (internal issue 398). * Clarify that the valid range of depth clear values should be limited to the 0..1 range and that copies to depth aspect must also be in this range (internal issue 412). * Specify ``a'' vs. ``an'' use in the style guide (internal issue 432). * Increase the maximum pname:nonCoherentAtomSize value in the <<features-limits-required,Required Limits>> section from 128 to 256 (internal issue 435). * Fix vk_platform.h for compiler errors on some Android platforms (internal issue 441). * Clarify that slink:VkPhysicalDeviceFeatures::pname:pEnabledFeatures == `NULL` disables all features, including the "required" feature pname:robustBufferAccess (internal issue 479). Other Issues: * Expand style guide and make it more self-consistent. * Use ISO 8601 date format everywhere. * Emphasise the correct way of using slink:VkSurfaceCapabilitiesKHR::pname:maxImageCount. * Added +VK_EXT_validation_flags+ extension for validation flag mechanism. * Fix an <<credits,author credit>> to include their current employer.
2016-09-17 04:22:17 +00:00
// refBegin vkCmdClearAttachments Clear regions within currently bound framebuffer attachments
Change log for July 10, 2016 Vulkan 1.0.20 spec update: * Bump API patch number and header version number to 20 for this update. Github Issues: * Replaced existing reference pages by text automatically extracted from the specification source, or generated from vk.xml in some cases. This isn't a complete solution for the reference pages, but puts them in a much better state. The ref pages (only) are now placed under a CC BY open source license, which is more current than the obsolete license previously used. Further improvements to the pages should not edit them directly, but instead concentrate on the specification source from which the ref pages are being extracted (public issues 44, 55, 160; internal issue 389).
2016-07-11 01:13:41 +00:00
Vulkan 1.0 branch 1.0 for release
2016-02-16 09:53:44 +00:00
To clear one or more regions of color and depth/stencil attachments inside a
render pass instance, call:
Change log for July 22, 2016 Vulkan 1.0.22 spec update: * Bump API patch number and header version number to 22 for this update. Github Issues: * Translate the subpass self-dependency language into concrete validity statements, and added a validity statement about the restrictions on layout parameters (public issue 267). * Add validity requirement that slink:VkAttachmentDescription::pname:finalLayout and slink:VkAttachmentReference::pname:layout must not be ename:VK_IMAGE_LAYOUT_UNDEFINED or ename:VK_IMAGE_LAYOUT_PREINITIALIZED (public issue 268). * Clarify that slink:VkSubpassDescription::pname:pResolveAttachments layouts are used. Make language consistent with other attachment arrays (public issue 270). * Changed 64-bit definition for dname:VK_DEFINE_NON_DISPATCHABLE_HANDLE to work for x32 platform in +vk.xml+ and the resulting +vulkan.h+ (public issue 282). * Add missing error return code for flink:vkEnumerateInstanceExtensionProperties and flink:vkEnumerateDeviceExtensionProperties (public issue 285) * Fix several cases of stext::VkStructName.memberName markup to stext::VkStructName::pname:memberName, to match other usage in the spec, and describe this markup in the style guide (public issue 286). * Modified validity language generation script to avoid redundant common ancestor language if covered by generic parent language, and used `Both' instead of `Each' when appropriate (public issue 288). Internal Issues: * Add language about behavior of flink:vkAllocateDescriptorSets when allocation fails due to fragmentation, a new error ename:VK_ERROR_FRAGMENTED_POOL, and a Note explaining the situation (internal issue 309). * For the features of code:PointSize, code:ClipDistance, and code:CullDistance, the SPIR-V capability is required to be declared on use (read or write) rather than on decoration (internal issue 359). * Have desktop versions of GLSL respect precision qualification (code:mediump and code:lowp) when compiling for Vulkan. These will get translated to SPIR-V's code:RelaxedPrecision decoration as they do with OpenGL ES versions of GLSL (ESSL). The default precision of all types is code:highp when using a desktop version (internal issue 360). * Add validity statement for slink:VkImageCreateInfo specifying that multisampled images must be two-dimensional, optimally tiled, and with a single mipmap level (internal issue 369). * Add validity statements to slink:VkImageViewCreateInfo disallowing creation of images or image views with no supported features. Made some slink:VkImageViewCreateInfo validity statements more precise and consistent. Added a Note to the <<features,features>> chapter about formats with no features (internal issue 371). * Remove +manpages+ from default build targets. Nroff outputs containing imbedded latexmath will not render properly. Fixing this is a lot of work for limited use cases (internal issue 401). Other Commits: * Fix flink:vkRenderPassBeginInfo::pname:clearValueCount validity statement to be based on attachment indices rather than the number of cleared attachments (Vulkan-LoaderAndValidationLayers/issues/601). * Convert registry documentation from LaTeX to asciidoc source and rename from +src/spec/readme.tex+ to +src/spec/registry.txt+. * Fix lack of Oxford commas in validity language. * Lots of cleanup of generator scripts and Makefiles to move extension list for generator into the script arguments instead of the body of genvk.py, and express better dependencies between XML, scripts, and generated files.
2016-07-23 10:15:48 +00:00
include::../api/protos/vkCmdClearAttachments.txt[]
Vulkan 1.0 branch 1.0 for release
2016-02-16 09:53:44 +00:00
* pname:commandBuffer is the command buffer into which the command will be
recorded.
* pname:attachmentCount is the number of entries in the pname:pAttachments
array.
* pname:pAttachments is a pointer to an array of slink:VkClearAttachment
structures defining the attachments to clear and the clear values to
use.
* pname:rectCount is the number of entries in the pname:pRects array.
* pname:pRects points to an array of slink:VkClearRect structures defining
Change log for March 10, 2016 Vulkan 1.0.6 spec update: * Bump API patch number and header version number to 6 for this update. Github Issues: * Define 'invocation group' for compute and graphics shaders. Cleanup definition and use of 'workgroup', and add glossary entries (public issue 1). * Various minor editorial fixes (public issue 33). * Clarify locations for block members in the &lt;&lt;interfaces-iointerfaces-locations,Location Assignment>> section (public issue 45). * Editorial fixes for &lt;&lt;commandbuffer-allocation,Command Buffer Allocation>> section (public issues 54, 59). * Clarify behavior of depth test in the &lt;&lt;fragops-depth,Depth Test&gt;&gt; section (public issues 80, 81). * Remove discussion of return codes from flink:vkGetPhysicalDeviceSparseImageFormatProperties and flink:vkGetImageSparseMemoryRequirements, which don't return values (public issue 82). * Allow flink:vkCmdDrawIndirect and flink:vkCmdDrawIndexedIndirect pname:drawCount of 0, as well as 1, when the multiDrawIndirect feature is not supported (public issue 88). * Remove confusing wording in the &lt;&lt;features-limits,Limits>> section describing the slink:VkPhysicalDeviceLimits pname:minTexelBufferOffsetAlignment, pname:minUniformBufferOffsetAlignment, and pname:minStorageBufferOffsetAlignment members as both minimums and maximums (public issue 91). * Clarified that only the RGB components should be affected in places where sRGB is referred to in the spec, such as ASTC formats. Minor re-wording to avoid "color space" when actively incorrect, now that we refer to the Data Format Spec which actually makes a distinction between color space and transfer function (public issue 94). * Treat pname:pPropertyCount == 0 consistently in flink:vkEnumerateInstanceLayerProperties and flink:vkEnumerateDeviceLayerProperties (public issue 99) * Cleanup minor editorial issues in chapters 14-17 (public issue 100). * Clarify definition of flink:vkEnumerateInstanceExtensionProperties and flink:vkEnumerateDeviceExtensionProperties (public issue 101). * Define the flink:vkEnumerateInstanceExtensionProperties and flink:vkEnumerateDeviceExtensionProperties pname:pLayerName parameter to be a pointer to a null-terminated UTF-8 string (public issue 101). * Rearrange "Missing information" references in mandatory format tables (public issue 101). * Clarify that the enumerated extensions returned by flink:vkEnumerateInstanceExtensionProperties and flink:vkEnumerateDeviceExtensionProperties will only include extensions provided by the platform or extensions implemented in implicitly enabled layers (public issue 101). * Miscellaneous editorial fixes. Include the Vulkan spec patch number in the PDF title. Fix label on &lt;&lt;fig-non-strict-lines,Non strict lines>> diagram. Use more easily distinguished symbols in tables in the &lt;&lt;features-required-format-support,Required Format Support>> section. Don't require FQDNs used as layer names be encoded in lower case if not possible, in the &lt;&lt;extensions-naming-conventions, Extension and Layer Naming Conventions>> section (public issues 101, 119, 121). Internal Issues: * Fixed excessive spacing in tables in XHTML (internal issue 18). * Clarify that ename:VK_COMMAND_BUFFER_USAGE_ONE_TIME_SUBMIT_BIT applies to secondary command buffers. Previously spec only referred to the members of pname:pCommandBuffers being affected by this bit. Added a separate slink:VkSubmitInfo Valid Usage restriction specifying that ename:VK_COMMAND_BUFFER_USAGE_ONE_TIME_SUBMIT_BIT also applies to any secondary command buffers that are recorded into the primary command buffers in pname:pCommandBuffers (internal issue 106). * Clarify that slink:VkDeviceCreateInfo::pname:pEnabledFeatures can be NULL (internal issue 117). * Remove "the value of" where it is redundant (e.g. speaking of an API parameter, struct member, or SPIR-V variable, but not when speaking of color components) (internal issue 175). * Forced patch version to always be 0 in the header. Add a "VK_API_VERSION_<major>_<minor>" macro for people to use to do the right thing. Add a VK_HEADER_VERSION which captures the header release number independent of the spec patch number (internal issue 176). * Correct description of slink:VkPipelineShaderStageCreateInfo::pname:pName to "a pointer to a null-terminated UTF-8 string" (internal issue #197). Other Commits: * Updated DataFormat spec reference to the new date for revision 5 of that spec. * Fixed KEEP option (to retain LaTeX intermediate files) in the Makefile to be included when edited there, as well as set on the command line. * Reserve and add "VK_IMG_filter_cubic" to the registry, and implement script functionality to add and remove validity from existing functions. Includes schema and readme changes. * Update GL_KHR_vulkan_glsl so push_constants do not have descriptor sets.
2016-03-11 01:33:02 +00:00
regions within each selected attachment to clear.
Vulkan 1.0 branch 1.0 for release
2016-02-16 09:53:44 +00:00
fname:vkCmdClearAttachments can: clear multiple regions of each attachment
Change log for September 23, 2016 Vulkan 1.0.28 spec update: * Bump API patch number and header version number to 28 for this update. Github Issues: * Minor spelling and typography cleanup, add definitions of ename:VK_FALSE and ename:VK_TRUE as just what their names say (public issues 220, 318, 325, 365; internal issues 451, 496) * Clarify that the pname:maxDescriptorSet limits in the <<features-limits-required,Required Limits>> table are n * maxPerStage limit (where n=number of supported stages) (public issue 254). * Minor cleanup to <<boilerplate-platform-macros,Platform-Specific Macro Definitions>> appendix (public issue 314). * Add valid usage statement to slink:VkPipelineLayoutCreateInfo disallowing multiple push constant ranges for the same shader stage (public issue 340). * Clarify the elink:VkSharingMode description of what executing the "same" barriers means in case of ownership transfer (public issue 347). * Rename copyright.txt and add COPYING.md to try and reduce confusion about applicable copyrights (public issue 350). * Extend the table in the <<boilerplate-wsi-header, Window System-Specific Header Control>> section to describe the external headers included when each etext:VK_USE_PLATFORM_* macro is defined (public issue 376). Internal Issues: * Add "Revision History" to the PDF outputs following the table of contents, to match HTML outputs (internal issue 43). * Clarified that flink:vkMapMemory may fail due to virtual address space limitations (internal issue 346). * Add +refBody+ comment markup for ref page autoextraction when required (internal issue 400). * Document proper use of "mipmap" and "mip" in the style guide API naming rules, matching the spelling rules (internal issue 471). * Tweak the <<extensions,Layers and Extensions>> appendix to note that the Specification may be built with arbitrary combinations of extensions (internal issue 483). * Remove incorrect statement allowing slink:VkClearAttachment::pname:colorAttachment to be >= slink:VkSubpassDescription::pname:colorAttachmentCount (internal issue 488). * The <<features-limits-viewportboundsrange,viewportBoundsRange>> is expressed in terms of the pname:maxViewportDimensions but this is actually two values. Clarify that it's based on the larger of the two (if they differ) (internal issue 499). Other Issues: * Reflowed text of the entire spec using the 'reflow' Makefile gater, to (hopefully) reduce future internal git churn as edits are made and extensions added in return for one-time pain. This has no perceptible change on the spec outputs but considerable changes on the asciidoc source (internal issue 367).
2016-09-24 07:58:11 +00:00
used in the current subpass of a render pass instance.
This command must: be called only inside a render pass instance, and
implicitly selects the images to clear based on the current framebuffer
attachments and the command parameters.
Vulkan 1.0 branch 1.0 for release
2016-02-16 09:53:44 +00:00
Change log for September 30, 2016 Vulkan 1.0.29 spec update: * Bump API patch number and header version number to 29 for this update. Github Issues: * Remove redundant constraint on slink:VkCommandBufferInheritanceInfo::pname:queryFlags (public issue 224). * Fix typo and remove link in Note in the <<extended-functionality-instance-extensions-and-devices, Instance Extensions and Device Extensions>> section (public issue 359). * Fix erroneous validation statement for the pname:layout member of slink:VkComputePipelineCreateInfo (public issue 362). Internal Issues: * Restore long figure captions using asciidoc sidebar blocks, due to restrictions of asciidoc syntax (internal issue 101). * Replace most latexmath equations with comparable markup in straight asciidoc, which significantly improves time required to fully load and process the HTML forms of the Specification. There are known minor font and alignment inconsistencies with MathJax and PDF rendering of latexmath equations. Please do not file github issues about these. We are aware of the inconsistencies and will make refinements over time, while the performance improvements are compelling in at least some major browsers (internal issue 313). * Move handcoded validity statements from +vk.xml+ into the Specification body, easing work in the single-branch model. Specify the distinction between these explicit statements, and the implicit validity statements inferred from vk.xml. Validity statements now appear in two blocks for each command and structure - handcoded "Valid Usage" and the implicit "Valid Usage (Implicit)" (internal issue 392). * Add the +returnedonly="false"+ attribute to WSI output structures, removing incorrectly generated implicit validity statements for slink:VkDisplayPropertiesKHR, slink:VkDisplayPlanePropertiesKHR, slink:VkDisplayModePropertiesKHR, slink:VkDisplayPlaneCapabilitiesKHR, slink:VkSurfaceCapabilitiesKHR, and slink:VkSurfaceFormatKHR structures (internal issue 486). * Update slink:VkImageLayout to require the ename:VK_IMAGE_USAGE_SAMPLED_BIT be set for sampled depth/stencil images (internal issue 487). * Use an explicit format specifier string for the date command invocation in the +Makefile+ instead of the shorthand -R option, which doesn't work on BSD and MaxOS X date commands (internal issue 500). Other Issues: * Use the terms ``allocation scope'' and ``extension scope'' instead of just ``scope'', and add them to the glossary.
2016-10-01 04:13:37 +00:00
.Valid Usage
****
Change log for May 20, 2017 Vulkan 1.0.50 spec update: * Bump API patch number and header version number to 50 for this update. Github Issues: * Fix numerous minor issues with the VK_EXT_debug_report extension (public issues 478, 483, 486, 489, 490). Internal Issues: * Update flink:vkAllocateDescriptorSets to specify conditions under which to return ename:VK_ERROR_FRAGMENTED_POOL or ename:VK_ERROR_OUT_OF_POOL_MEMORY instead of out-of-host/out-of-device-memory, and improve the <<fundamentals-errorcodes, description of those errors (internal issue 654). * Add a NOTE documenting that flink:vkAcquireNextImageKHR can only signal a single semaphore, and how to deal with that when multiple physical devices in a logical device need to wait on it (internal issue 730). * Improve description of pname:pNext chains of slink:VkPhysicalDeviceImageFormatInfo2KHR and slink:VkImageFormatProperties2KHR (internal issue 814). * Clean up math markup issues in the <<textures, Image Operations>> chapter (internal issue 818). * Update validusage target to use more robust code for preprocessing, by making direct use of Asciidoctor's preprocessor. Added uniqueItems check to JSON vu schema and add clean_validusage target (internal issue 826). * Update style guide to prohibit writing non-self-contained (on a single bullet point) Valid Usage statements, and modify offending Valid Usage statements in the Specification to match, to assist with automatic extraction for the validation layers (internal issue 828). * Add ename:VK_VALIDATION_CHECK_SHADERS_EXT to elink:VkValidationCheckEXT of the `VK_EXT_validation_flags` extension, to selectively disable shader validation. * Remove duplicate valid usage statement for slink:VkImageMemoryBarrier. * Modify reflow.py script to place VUID tag anchors standalone on a line following their corresponding bullet point, and reflow the spec text accordingly (this had been pending since the initial tag deployment). New Extensions: * `VK_AMD_texture_gather_bias_lod`
2017-05-21 00:00:50 +00:00
* [[VUID-vkCmdClearAttachments-aspectMask-00015]]
If the pname:aspectMask member of any given element of
Change log for September 30, 2016 Vulkan 1.0.29 spec update: * Bump API patch number and header version number to 29 for this update. Github Issues: * Remove redundant constraint on slink:VkCommandBufferInheritanceInfo::pname:queryFlags (public issue 224). * Fix typo and remove link in Note in the <<extended-functionality-instance-extensions-and-devices, Instance Extensions and Device Extensions>> section (public issue 359). * Fix erroneous validation statement for the pname:layout member of slink:VkComputePipelineCreateInfo (public issue 362). Internal Issues: * Restore long figure captions using asciidoc sidebar blocks, due to restrictions of asciidoc syntax (internal issue 101). * Replace most latexmath equations with comparable markup in straight asciidoc, which significantly improves time required to fully load and process the HTML forms of the Specification. There are known minor font and alignment inconsistencies with MathJax and PDF rendering of latexmath equations. Please do not file github issues about these. We are aware of the inconsistencies and will make refinements over time, while the performance improvements are compelling in at least some major browsers (internal issue 313). * Move handcoded validity statements from +vk.xml+ into the Specification body, easing work in the single-branch model. Specify the distinction between these explicit statements, and the implicit validity statements inferred from vk.xml. Validity statements now appear in two blocks for each command and structure - handcoded "Valid Usage" and the implicit "Valid Usage (Implicit)" (internal issue 392). * Add the +returnedonly="false"+ attribute to WSI output structures, removing incorrectly generated implicit validity statements for slink:VkDisplayPropertiesKHR, slink:VkDisplayPlanePropertiesKHR, slink:VkDisplayModePropertiesKHR, slink:VkDisplayPlaneCapabilitiesKHR, slink:VkSurfaceCapabilitiesKHR, and slink:VkSurfaceFormatKHR structures (internal issue 486). * Update slink:VkImageLayout to require the ename:VK_IMAGE_USAGE_SAMPLED_BIT be set for sampled depth/stencil images (internal issue 487). * Use an explicit format specifier string for the date command invocation in the +Makefile+ instead of the shorthand -R option, which doesn't work on BSD and MaxOS X date commands (internal issue 500). Other Issues: * Use the terms ``allocation scope'' and ``extension scope'' instead of just ``scope'', and add them to the glossary.
2016-10-01 04:13:37 +00:00
pname:pAttachments contains ename:VK_IMAGE_ASPECT_COLOR_BIT, the
pname:colorAttachment member of those elements must: refer to a valid
color attachment in the current subpass
Change log for May 20, 2017 Vulkan 1.0.50 spec update: * Bump API patch number and header version number to 50 for this update. Github Issues: * Fix numerous minor issues with the VK_EXT_debug_report extension (public issues 478, 483, 486, 489, 490). Internal Issues: * Update flink:vkAllocateDescriptorSets to specify conditions under which to return ename:VK_ERROR_FRAGMENTED_POOL or ename:VK_ERROR_OUT_OF_POOL_MEMORY instead of out-of-host/out-of-device-memory, and improve the <<fundamentals-errorcodes, description of those errors (internal issue 654). * Add a NOTE documenting that flink:vkAcquireNextImageKHR can only signal a single semaphore, and how to deal with that when multiple physical devices in a logical device need to wait on it (internal issue 730). * Improve description of pname:pNext chains of slink:VkPhysicalDeviceImageFormatInfo2KHR and slink:VkImageFormatProperties2KHR (internal issue 814). * Clean up math markup issues in the <<textures, Image Operations>> chapter (internal issue 818). * Update validusage target to use more robust code for preprocessing, by making direct use of Asciidoctor's preprocessor. Added uniqueItems check to JSON vu schema and add clean_validusage target (internal issue 826). * Update style guide to prohibit writing non-self-contained (on a single bullet point) Valid Usage statements, and modify offending Valid Usage statements in the Specification to match, to assist with automatic extraction for the validation layers (internal issue 828). * Add ename:VK_VALIDATION_CHECK_SHADERS_EXT to elink:VkValidationCheckEXT of the `VK_EXT_validation_flags` extension, to selectively disable shader validation. * Remove duplicate valid usage statement for slink:VkImageMemoryBarrier. * Modify reflow.py script to place VUID tag anchors standalone on a line following their corresponding bullet point, and reflow the spec text accordingly (this had been pending since the initial tag deployment). New Extensions: * `VK_AMD_texture_gather_bias_lod`
2017-05-21 00:00:50 +00:00
* [[VUID-vkCmdClearAttachments-pRects-00016]]
The rectangular region specified by a given element of pname:pRects
Change log for September 30, 2016 Vulkan 1.0.29 spec update: * Bump API patch number and header version number to 29 for this update. Github Issues: * Remove redundant constraint on slink:VkCommandBufferInheritanceInfo::pname:queryFlags (public issue 224). * Fix typo and remove link in Note in the <<extended-functionality-instance-extensions-and-devices, Instance Extensions and Device Extensions>> section (public issue 359). * Fix erroneous validation statement for the pname:layout member of slink:VkComputePipelineCreateInfo (public issue 362). Internal Issues: * Restore long figure captions using asciidoc sidebar blocks, due to restrictions of asciidoc syntax (internal issue 101). * Replace most latexmath equations with comparable markup in straight asciidoc, which significantly improves time required to fully load and process the HTML forms of the Specification. There are known minor font and alignment inconsistencies with MathJax and PDF rendering of latexmath equations. Please do not file github issues about these. We are aware of the inconsistencies and will make refinements over time, while the performance improvements are compelling in at least some major browsers (internal issue 313). * Move handcoded validity statements from +vk.xml+ into the Specification body, easing work in the single-branch model. Specify the distinction between these explicit statements, and the implicit validity statements inferred from vk.xml. Validity statements now appear in two blocks for each command and structure - handcoded "Valid Usage" and the implicit "Valid Usage (Implicit)" (internal issue 392). * Add the +returnedonly="false"+ attribute to WSI output structures, removing incorrectly generated implicit validity statements for slink:VkDisplayPropertiesKHR, slink:VkDisplayPlanePropertiesKHR, slink:VkDisplayModePropertiesKHR, slink:VkDisplayPlaneCapabilitiesKHR, slink:VkSurfaceCapabilitiesKHR, and slink:VkSurfaceFormatKHR structures (internal issue 486). * Update slink:VkImageLayout to require the ename:VK_IMAGE_USAGE_SAMPLED_BIT be set for sampled depth/stencil images (internal issue 487). * Use an explicit format specifier string for the date command invocation in the +Makefile+ instead of the shorthand -R option, which doesn't work on BSD and MaxOS X date commands (internal issue 500). Other Issues: * Use the terms ``allocation scope'' and ``extension scope'' instead of just ``scope'', and add them to the glossary.
2016-10-01 04:13:37 +00:00
must: be contained within the render area of the current render pass
instance
Change log for May 20, 2017 Vulkan 1.0.50 spec update: * Bump API patch number and header version number to 50 for this update. Github Issues: * Fix numerous minor issues with the VK_EXT_debug_report extension (public issues 478, 483, 486, 489, 490). Internal Issues: * Update flink:vkAllocateDescriptorSets to specify conditions under which to return ename:VK_ERROR_FRAGMENTED_POOL or ename:VK_ERROR_OUT_OF_POOL_MEMORY instead of out-of-host/out-of-device-memory, and improve the <<fundamentals-errorcodes, description of those errors (internal issue 654). * Add a NOTE documenting that flink:vkAcquireNextImageKHR can only signal a single semaphore, and how to deal with that when multiple physical devices in a logical device need to wait on it (internal issue 730). * Improve description of pname:pNext chains of slink:VkPhysicalDeviceImageFormatInfo2KHR and slink:VkImageFormatProperties2KHR (internal issue 814). * Clean up math markup issues in the <<textures, Image Operations>> chapter (internal issue 818). * Update validusage target to use more robust code for preprocessing, by making direct use of Asciidoctor's preprocessor. Added uniqueItems check to JSON vu schema and add clean_validusage target (internal issue 826). * Update style guide to prohibit writing non-self-contained (on a single bullet point) Valid Usage statements, and modify offending Valid Usage statements in the Specification to match, to assist with automatic extraction for the validation layers (internal issue 828). * Add ename:VK_VALIDATION_CHECK_SHADERS_EXT to elink:VkValidationCheckEXT of the `VK_EXT_validation_flags` extension, to selectively disable shader validation. * Remove duplicate valid usage statement for slink:VkImageMemoryBarrier. * Modify reflow.py script to place VUID tag anchors standalone on a line following their corresponding bullet point, and reflow the spec text accordingly (this had been pending since the initial tag deployment). New Extensions: * `VK_AMD_texture_gather_bias_lod`
2017-05-21 00:00:50 +00:00
* [[VUID-vkCmdClearAttachments-pRects-00017]]
The layers specified by a given element of pname:pRects must: be
Change log for September 30, 2016 Vulkan 1.0.29 spec update: * Bump API patch number and header version number to 29 for this update. Github Issues: * Remove redundant constraint on slink:VkCommandBufferInheritanceInfo::pname:queryFlags (public issue 224). * Fix typo and remove link in Note in the <<extended-functionality-instance-extensions-and-devices, Instance Extensions and Device Extensions>> section (public issue 359). * Fix erroneous validation statement for the pname:layout member of slink:VkComputePipelineCreateInfo (public issue 362). Internal Issues: * Restore long figure captions using asciidoc sidebar blocks, due to restrictions of asciidoc syntax (internal issue 101). * Replace most latexmath equations with comparable markup in straight asciidoc, which significantly improves time required to fully load and process the HTML forms of the Specification. There are known minor font and alignment inconsistencies with MathJax and PDF rendering of latexmath equations. Please do not file github issues about these. We are aware of the inconsistencies and will make refinements over time, while the performance improvements are compelling in at least some major browsers (internal issue 313). * Move handcoded validity statements from +vk.xml+ into the Specification body, easing work in the single-branch model. Specify the distinction between these explicit statements, and the implicit validity statements inferred from vk.xml. Validity statements now appear in two blocks for each command and structure - handcoded "Valid Usage" and the implicit "Valid Usage (Implicit)" (internal issue 392). * Add the +returnedonly="false"+ attribute to WSI output structures, removing incorrectly generated implicit validity statements for slink:VkDisplayPropertiesKHR, slink:VkDisplayPlanePropertiesKHR, slink:VkDisplayModePropertiesKHR, slink:VkDisplayPlaneCapabilitiesKHR, slink:VkSurfaceCapabilitiesKHR, and slink:VkSurfaceFormatKHR structures (internal issue 486). * Update slink:VkImageLayout to require the ename:VK_IMAGE_USAGE_SAMPLED_BIT be set for sampled depth/stencil images (internal issue 487). * Use an explicit format specifier string for the date command invocation in the +Makefile+ instead of the shorthand -R option, which doesn't work on BSD and MaxOS X date commands (internal issue 500). Other Issues: * Use the terms ``allocation scope'' and ``extension scope'' instead of just ``scope'', and add them to the glossary.
2016-10-01 04:13:37 +00:00
contained within every attachment that pname:pAttachments refers to
Change log for February 27, 2017 Vulkan 1.0.42 spec update: * Bump API patch number and header version number to 42 for this update (the first anniversary edition). Github Issues: * Changed asciidoctor macros so cross-page links in the standalone reference pages function properly (public issue 462). Internal Issues: * Clarified host visibility discussion for slink:VkMemoryType, flink:vkInvalidateMappedMemoryRanges, elink:VkAccessFlagBits, and the <<synchronization-framebuffer-regions,Framebuffer Region Dependencies>> section, removing duplicated information and adding a central definition in the access types section (internal issue 552). * Change description of slink:vkGetPhysicalDeviceSurfacePresentModesKHR::pname:pPresentModes to return an array of values, not structures (internal issue 699). New Extensions: * Add a NOTE to the <<extensions,Layers & Extensions>> chapter describing the experimental status of `KHX` extensions. * Add new Khronos, Khronos Experimental, and vendor Vulkan extensions for release at GDC: ** VK_KHR_descriptor_update_template ** VK_KHR_push_descriptor ** VK_KHX_device_group ** VK_KHX_device_group_creation ** VK_KHX_external_memory ** VK_KHX_external_memory_capabilities ** VK_KHX_external_memory_fd ** VK_KHX_external_memory_win32 ** VK_KHX_external_semaphore ** VK_KHX_external_semaphore_capabilities ** VK_KHX_external_semaphore_fd ** VK_KHX_external_semaphore_win32 ** VK_KHX_multiview ** VK_KHX_win32_keyed_mutex ** VK_EXT_discard_rectangles ** VK_MVK_ios_surface ** VK_MVK_macos_surface ** VK_NVX_multiview_per_view_attributes ** VK_NV_clip_space_w_scaling ** VK_NV_geometry_shader_passthrough ** VK_NV_sample_mask_override_coverage ** VK_NV_viewport_array2 ** VK_NV_viewport_swizzle * Add new GLSL vendor extensions to support new builtin variables: ** GL_EXT_device_group ** GL_EXT_multiview
2017-02-27 06:54:26 +00:00
ifdef::VK_KHX_multiview[]
Change log for May 20, 2017 Vulkan 1.0.50 spec update: * Bump API patch number and header version number to 50 for this update. Github Issues: * Fix numerous minor issues with the VK_EXT_debug_report extension (public issues 478, 483, 486, 489, 490). Internal Issues: * Update flink:vkAllocateDescriptorSets to specify conditions under which to return ename:VK_ERROR_FRAGMENTED_POOL or ename:VK_ERROR_OUT_OF_POOL_MEMORY instead of out-of-host/out-of-device-memory, and improve the <<fundamentals-errorcodes, description of those errors (internal issue 654). * Add a NOTE documenting that flink:vkAcquireNextImageKHR can only signal a single semaphore, and how to deal with that when multiple physical devices in a logical device need to wait on it (internal issue 730). * Improve description of pname:pNext chains of slink:VkPhysicalDeviceImageFormatInfo2KHR and slink:VkImageFormatProperties2KHR (internal issue 814). * Clean up math markup issues in the <<textures, Image Operations>> chapter (internal issue 818). * Update validusage target to use more robust code for preprocessing, by making direct use of Asciidoctor's preprocessor. Added uniqueItems check to JSON vu schema and add clean_validusage target (internal issue 826). * Update style guide to prohibit writing non-self-contained (on a single bullet point) Valid Usage statements, and modify offending Valid Usage statements in the Specification to match, to assist with automatic extraction for the validation layers (internal issue 828). * Add ename:VK_VALIDATION_CHECK_SHADERS_EXT to elink:VkValidationCheckEXT of the `VK_EXT_validation_flags` extension, to selectively disable shader validation. * Remove duplicate valid usage statement for slink:VkImageMemoryBarrier. * Modify reflow.py script to place VUID tag anchors standalone on a line following their corresponding bullet point, and reflow the spec text accordingly (this had been pending since the initial tag deployment). New Extensions: * `VK_AMD_texture_gather_bias_lod`
2017-05-21 00:00:50 +00:00
* [[VUID-vkCmdClearAttachments-baseArrayLayer-00018]]
If the render pass instance this is recorded in uses multiview, then
Change log for February 27, 2017 Vulkan 1.0.42 spec update: * Bump API patch number and header version number to 42 for this update (the first anniversary edition). Github Issues: * Changed asciidoctor macros so cross-page links in the standalone reference pages function properly (public issue 462). Internal Issues: * Clarified host visibility discussion for slink:VkMemoryType, flink:vkInvalidateMappedMemoryRanges, elink:VkAccessFlagBits, and the <<synchronization-framebuffer-regions,Framebuffer Region Dependencies>> section, removing duplicated information and adding a central definition in the access types section (internal issue 552). * Change description of slink:vkGetPhysicalDeviceSurfacePresentModesKHR::pname:pPresentModes to return an array of values, not structures (internal issue 699). New Extensions: * Add a NOTE to the <<extensions,Layers & Extensions>> chapter describing the experimental status of `KHX` extensions. * Add new Khronos, Khronos Experimental, and vendor Vulkan extensions for release at GDC: ** VK_KHR_descriptor_update_template ** VK_KHR_push_descriptor ** VK_KHX_device_group ** VK_KHX_device_group_creation ** VK_KHX_external_memory ** VK_KHX_external_memory_capabilities ** VK_KHX_external_memory_fd ** VK_KHX_external_memory_win32 ** VK_KHX_external_semaphore ** VK_KHX_external_semaphore_capabilities ** VK_KHX_external_semaphore_fd ** VK_KHX_external_semaphore_win32 ** VK_KHX_multiview ** VK_KHX_win32_keyed_mutex ** VK_EXT_discard_rectangles ** VK_MVK_ios_surface ** VK_MVK_macos_surface ** VK_NVX_multiview_per_view_attributes ** VK_NV_clip_space_w_scaling ** VK_NV_geometry_shader_passthrough ** VK_NV_sample_mask_override_coverage ** VK_NV_viewport_array2 ** VK_NV_viewport_swizzle * Add new GLSL vendor extensions to support new builtin variables: ** GL_EXT_device_group ** GL_EXT_multiview
2017-02-27 06:54:26 +00:00
pname:baseArrayLayer must: be zero and pname:layerCount must: be one.
endif::VK_KHX_multiview[]
Change log for September 30, 2016 Vulkan 1.0.29 spec update: * Bump API patch number and header version number to 29 for this update. Github Issues: * Remove redundant constraint on slink:VkCommandBufferInheritanceInfo::pname:queryFlags (public issue 224). * Fix typo and remove link in Note in the <<extended-functionality-instance-extensions-and-devices, Instance Extensions and Device Extensions>> section (public issue 359). * Fix erroneous validation statement for the pname:layout member of slink:VkComputePipelineCreateInfo (public issue 362). Internal Issues: * Restore long figure captions using asciidoc sidebar blocks, due to restrictions of asciidoc syntax (internal issue 101). * Replace most latexmath equations with comparable markup in straight asciidoc, which significantly improves time required to fully load and process the HTML forms of the Specification. There are known minor font and alignment inconsistencies with MathJax and PDF rendering of latexmath equations. Please do not file github issues about these. We are aware of the inconsistencies and will make refinements over time, while the performance improvements are compelling in at least some major browsers (internal issue 313). * Move handcoded validity statements from +vk.xml+ into the Specification body, easing work in the single-branch model. Specify the distinction between these explicit statements, and the implicit validity statements inferred from vk.xml. Validity statements now appear in two blocks for each command and structure - handcoded "Valid Usage" and the implicit "Valid Usage (Implicit)" (internal issue 392). * Add the +returnedonly="false"+ attribute to WSI output structures, removing incorrectly generated implicit validity statements for slink:VkDisplayPropertiesKHR, slink:VkDisplayPlanePropertiesKHR, slink:VkDisplayModePropertiesKHR, slink:VkDisplayPlaneCapabilitiesKHR, slink:VkSurfaceCapabilitiesKHR, and slink:VkSurfaceFormatKHR structures (internal issue 486). * Update slink:VkImageLayout to require the ename:VK_IMAGE_USAGE_SAMPLED_BIT be set for sampled depth/stencil images (internal issue 487). * Use an explicit format specifier string for the date command invocation in the +Makefile+ instead of the shorthand -R option, which doesn't work on BSD and MaxOS X date commands (internal issue 500). Other Issues: * Use the terms ``allocation scope'' and ``extension scope'' instead of just ``scope'', and add them to the glossary.
2016-10-01 04:13:37 +00:00
****
Vulkan 1.0 branch 1.0 for release
2016-02-16 09:53:44 +00:00
include::../validity/protos/vkCmdClearAttachments.txt[]
Change log for September 16, 2016 Vulkan 1.0.27 spec update: * Bump API patch number and header version number to 27 for this update. Github Issues: * Weaken flink:vkGetPipelineCacheData invariance conditions; previous conditions were stronger than agreed and can't be guaranteed (public issue 280). * Add link to "Vulkan Loader Specification and Architecture Overview" document to Normative References section (public issue 359). Internal Issues: * Be more clear in the <<interfaces-resources-layout-std140, uniform buffer layout>> section that block offsets can be out of order (internal issue 396). * Document that extension authors should add support for their extensions to the validation layers (internal issue 398). * Clarify that the valid range of depth clear values should be limited to the 0..1 range and that copies to depth aspect must also be in this range (internal issue 412). * Specify ``a'' vs. ``an'' use in the style guide (internal issue 432). * Increase the maximum pname:nonCoherentAtomSize value in the <<features-limits-required,Required Limits>> section from 128 to 256 (internal issue 435). * Fix vk_platform.h for compiler errors on some Android platforms (internal issue 441). * Clarify that slink:VkPhysicalDeviceFeatures::pname:pEnabledFeatures == `NULL` disables all features, including the "required" feature pname:robustBufferAccess (internal issue 479). Other Issues: * Expand style guide and make it more self-consistent. * Use ISO 8601 date format everywhere. * Emphasise the correct way of using slink:VkSurfaceCapabilitiesKHR::pname:maxImageCount. * Added +VK_EXT_validation_flags+ extension for validation flag mechanism. * Fix an <<credits,author credit>> to include their current employer.
2016-09-17 04:22:17 +00:00
// refBegin VkClearRect Structure specifying a clear rectangle
Change log for July 10, 2016 Vulkan 1.0.20 spec update: * Bump API patch number and header version number to 20 for this update. Github Issues: * Replaced existing reference pages by text automatically extracted from the specification source, or generated from vk.xml in some cases. This isn't a complete solution for the reference pages, but puts them in a much better state. The ref pages (only) are now placed under a CC BY open source license, which is more current than the obsolete license previously used. Further improvements to the pages should not edit them directly, but instead concentrate on the specification source from which the ref pages are being extracted (public issues 44, 55, 160; internal issue 389).
2016-07-11 01:13:41 +00:00
Change log for April 22, 2016 Vulkan 1.0.11 spec update: * Bump API patch number and header version number to 11 for this update. Github Issues: * Clarify the WSI extension language by switching from the fuzzier "ownership" language to more-consistent "acquire" language (public issue 117). * Clarify that memory barriers apply to all commands in the dependency chains in the flink:vkGetRenderAreaGranularity command and the <<synchronization-execution-and-memory-dependencies,Execution And Memory Dependencies>> section (public issue 132). * Clarify that a queue family is a set of queues in the <<fundamentals-execmodel,Execution Model>> section (public issue 166). * Removed requirement from valid usage language that VkPresentInfoKHR::waitSemaphoreCount must be greater than 0 (public issue 171). * Fix broken internal links, describe structures consistently, use consistent style for SPIR-V codewords, and tag normative terms that were missing asciidoc tags (public issue 183 and ancillary markup/normative language fixes). * Fix typos for slink:VkPhysicalDeviceLimits member names in slink:VkImageCreateInfo validity language (public issue 184). Internal Issues: * Document that the requested patch version number specified as part of slink:VkApplicationInfo::pname:apiVersion is ignored when creating an instance (internal issue 176). * Clarify handling of extension structs in the <<fundamentals-validusageValid Usage>> section (internal issue 254). * Update required slink:VkImageFormatProperties::pname:maxMipLevels to be limited to the maximum allowed mipmap pyramid size corresponding to the actual maximum supported size for the format (internal issue 256). * Modify the <<features-extentperimagetype,Allowed Extent Values Based On Image Type>> section so the allowed maximum extent is the maximum image dimension supported for each dimension of the type of texture being queried (internal issue 257). * Clarify in the <<spirvenv-module-validation,Validation Rules within a Module>> section that at least one of the code:LocalSize execution mode or code:WorkgroupSize decoration is required for each compute shader entry point in a shader module (internal issue 279). * Add validity rules for formats in flink:vkCmdClearColorImage and flink:vkCmdClearDepthStencilImage (internal issue 283). * Clarify that slink:VkImageFormatProperties::pname:maxResourceSize is an upper bound, and that it may not be possible to create an image anywhere near that size (internal issue 284). Other Commits: * Fix various minor markup errors reported by validation scripts. * Change copyright from Khronos Free Use License to Apache 2.0 license on relevant script/XML/header files. This does not affect the specification source copyright.
2016-04-21 08:08:38 +00:00
The sname:VkClearRect structure is defined as:
Vulkan 1.0 branch 1.0 for release
2016-02-16 09:53:44 +00:00
Change log for July 22, 2016 Vulkan 1.0.22 spec update: * Bump API patch number and header version number to 22 for this update. Github Issues: * Translate the subpass self-dependency language into concrete validity statements, and added a validity statement about the restrictions on layout parameters (public issue 267). * Add validity requirement that slink:VkAttachmentDescription::pname:finalLayout and slink:VkAttachmentReference::pname:layout must not be ename:VK_IMAGE_LAYOUT_UNDEFINED or ename:VK_IMAGE_LAYOUT_PREINITIALIZED (public issue 268). * Clarify that slink:VkSubpassDescription::pname:pResolveAttachments layouts are used. Make language consistent with other attachment arrays (public issue 270). * Changed 64-bit definition for dname:VK_DEFINE_NON_DISPATCHABLE_HANDLE to work for x32 platform in +vk.xml+ and the resulting +vulkan.h+ (public issue 282). * Add missing error return code for flink:vkEnumerateInstanceExtensionProperties and flink:vkEnumerateDeviceExtensionProperties (public issue 285) * Fix several cases of stext::VkStructName.memberName markup to stext::VkStructName::pname:memberName, to match other usage in the spec, and describe this markup in the style guide (public issue 286). * Modified validity language generation script to avoid redundant common ancestor language if covered by generic parent language, and used `Both' instead of `Each' when appropriate (public issue 288). Internal Issues: * Add language about behavior of flink:vkAllocateDescriptorSets when allocation fails due to fragmentation, a new error ename:VK_ERROR_FRAGMENTED_POOL, and a Note explaining the situation (internal issue 309). * For the features of code:PointSize, code:ClipDistance, and code:CullDistance, the SPIR-V capability is required to be declared on use (read or write) rather than on decoration (internal issue 359). * Have desktop versions of GLSL respect precision qualification (code:mediump and code:lowp) when compiling for Vulkan. These will get translated to SPIR-V's code:RelaxedPrecision decoration as they do with OpenGL ES versions of GLSL (ESSL). The default precision of all types is code:highp when using a desktop version (internal issue 360). * Add validity statement for slink:VkImageCreateInfo specifying that multisampled images must be two-dimensional, optimally tiled, and with a single mipmap level (internal issue 369). * Add validity statements to slink:VkImageViewCreateInfo disallowing creation of images or image views with no supported features. Made some slink:VkImageViewCreateInfo validity statements more precise and consistent. Added a Note to the <<features,features>> chapter about formats with no features (internal issue 371). * Remove +manpages+ from default build targets. Nroff outputs containing imbedded latexmath will not render properly. Fixing this is a lot of work for limited use cases (internal issue 401). Other Commits: * Fix flink:vkRenderPassBeginInfo::pname:clearValueCount validity statement to be based on attachment indices rather than the number of cleared attachments (Vulkan-LoaderAndValidationLayers/issues/601). * Convert registry documentation from LaTeX to asciidoc source and rename from +src/spec/readme.tex+ to +src/spec/registry.txt+. * Fix lack of Oxford commas in validity language. * Lots of cleanup of generator scripts and Makefiles to move extension list for generator into the script arguments instead of the body of genvk.py, and express better dependencies between XML, scripts, and generated files.
2016-07-23 10:15:48 +00:00
include::../api/structs/VkClearRect.txt[]
Vulkan 1.0 branch 1.0 for release
2016-02-16 09:53:44 +00:00
* pname:rect is the two-dimensional region to be cleared.
* pname:baseArrayLayer is the first layer to be cleared.
* pname:layerCount is the number of layers to clear.
Change log for September 30, 2016 Vulkan 1.0.29 spec update: * Bump API patch number and header version number to 29 for this update. Github Issues: * Remove redundant constraint on slink:VkCommandBufferInheritanceInfo::pname:queryFlags (public issue 224). * Fix typo and remove link in Note in the <<extended-functionality-instance-extensions-and-devices, Instance Extensions and Device Extensions>> section (public issue 359). * Fix erroneous validation statement for the pname:layout member of slink:VkComputePipelineCreateInfo (public issue 362). Internal Issues: * Restore long figure captions using asciidoc sidebar blocks, due to restrictions of asciidoc syntax (internal issue 101). * Replace most latexmath equations with comparable markup in straight asciidoc, which significantly improves time required to fully load and process the HTML forms of the Specification. There are known minor font and alignment inconsistencies with MathJax and PDF rendering of latexmath equations. Please do not file github issues about these. We are aware of the inconsistencies and will make refinements over time, while the performance improvements are compelling in at least some major browsers (internal issue 313). * Move handcoded validity statements from +vk.xml+ into the Specification body, easing work in the single-branch model. Specify the distinction between these explicit statements, and the implicit validity statements inferred from vk.xml. Validity statements now appear in two blocks for each command and structure - handcoded "Valid Usage" and the implicit "Valid Usage (Implicit)" (internal issue 392). * Add the +returnedonly="false"+ attribute to WSI output structures, removing incorrectly generated implicit validity statements for slink:VkDisplayPropertiesKHR, slink:VkDisplayPlanePropertiesKHR, slink:VkDisplayModePropertiesKHR, slink:VkDisplayPlaneCapabilitiesKHR, slink:VkSurfaceCapabilitiesKHR, and slink:VkSurfaceFormatKHR structures (internal issue 486). * Update slink:VkImageLayout to require the ename:VK_IMAGE_USAGE_SAMPLED_BIT be set for sampled depth/stencil images (internal issue 487). * Use an explicit format specifier string for the date command invocation in the +Makefile+ instead of the shorthand -R option, which doesn't work on BSD and MaxOS X date commands (internal issue 500). Other Issues: * Use the terms ``allocation scope'' and ``extension scope'' instead of just ``scope'', and add them to the glossary.
2016-10-01 04:13:37 +00:00
The layers [eq]#[pname:baseArrayLayer, pname:baseArrayLayer {plus}
pname:layerCount)# counting from the base layer of the attachment image view
are cleared.
Vulkan 1.0 branch 1.0 for release
2016-02-16 09:53:44 +00:00
include::../validity/structs/VkClearRect.txt[]
Change log for September 16, 2016 Vulkan 1.0.27 spec update: * Bump API patch number and header version number to 27 for this update. Github Issues: * Weaken flink:vkGetPipelineCacheData invariance conditions; previous conditions were stronger than agreed and can't be guaranteed (public issue 280). * Add link to "Vulkan Loader Specification and Architecture Overview" document to Normative References section (public issue 359). Internal Issues: * Be more clear in the <<interfaces-resources-layout-std140, uniform buffer layout>> section that block offsets can be out of order (internal issue 396). * Document that extension authors should add support for their extensions to the validation layers (internal issue 398). * Clarify that the valid range of depth clear values should be limited to the 0..1 range and that copies to depth aspect must also be in this range (internal issue 412). * Specify ``a'' vs. ``an'' use in the style guide (internal issue 432). * Increase the maximum pname:nonCoherentAtomSize value in the <<features-limits-required,Required Limits>> section from 128 to 256 (internal issue 435). * Fix vk_platform.h for compiler errors on some Android platforms (internal issue 441). * Clarify that slink:VkPhysicalDeviceFeatures::pname:pEnabledFeatures == `NULL` disables all features, including the "required" feature pname:robustBufferAccess (internal issue 479). Other Issues: * Expand style guide and make it more self-consistent. * Use ISO 8601 date format everywhere. * Emphasise the correct way of using slink:VkSurfaceCapabilitiesKHR::pname:maxImageCount. * Added +VK_EXT_validation_flags+ extension for validation flag mechanism. * Fix an <<credits,author credit>> to include their current employer.
2016-09-17 04:22:17 +00:00
// refBegin VkClearAttachment Structure specifying a clear attachment
Change log for July 10, 2016 Vulkan 1.0.20 spec update: * Bump API patch number and header version number to 20 for this update. Github Issues: * Replaced existing reference pages by text automatically extracted from the specification source, or generated from vk.xml in some cases. This isn't a complete solution for the reference pages, but puts them in a much better state. The ref pages (only) are now placed under a CC BY open source license, which is more current than the obsolete license previously used. Further improvements to the pages should not edit them directly, but instead concentrate on the specification source from which the ref pages are being extracted (public issues 44, 55, 160; internal issue 389).
2016-07-11 01:13:41 +00:00
Change log for April 22, 2016 Vulkan 1.0.11 spec update: * Bump API patch number and header version number to 11 for this update. Github Issues: * Clarify the WSI extension language by switching from the fuzzier "ownership" language to more-consistent "acquire" language (public issue 117). * Clarify that memory barriers apply to all commands in the dependency chains in the flink:vkGetRenderAreaGranularity command and the <<synchronization-execution-and-memory-dependencies,Execution And Memory Dependencies>> section (public issue 132). * Clarify that a queue family is a set of queues in the <<fundamentals-execmodel,Execution Model>> section (public issue 166). * Removed requirement from valid usage language that VkPresentInfoKHR::waitSemaphoreCount must be greater than 0 (public issue 171). * Fix broken internal links, describe structures consistently, use consistent style for SPIR-V codewords, and tag normative terms that were missing asciidoc tags (public issue 183 and ancillary markup/normative language fixes). * Fix typos for slink:VkPhysicalDeviceLimits member names in slink:VkImageCreateInfo validity language (public issue 184). Internal Issues: * Document that the requested patch version number specified as part of slink:VkApplicationInfo::pname:apiVersion is ignored when creating an instance (internal issue 176). * Clarify handling of extension structs in the <<fundamentals-validusageValid Usage>> section (internal issue 254). * Update required slink:VkImageFormatProperties::pname:maxMipLevels to be limited to the maximum allowed mipmap pyramid size corresponding to the actual maximum supported size for the format (internal issue 256). * Modify the <<features-extentperimagetype,Allowed Extent Values Based On Image Type>> section so the allowed maximum extent is the maximum image dimension supported for each dimension of the type of texture being queried (internal issue 257). * Clarify in the <<spirvenv-module-validation,Validation Rules within a Module>> section that at least one of the code:LocalSize execution mode or code:WorkgroupSize decoration is required for each compute shader entry point in a shader module (internal issue 279). * Add validity rules for formats in flink:vkCmdClearColorImage and flink:vkCmdClearDepthStencilImage (internal issue 283). * Clarify that slink:VkImageFormatProperties::pname:maxResourceSize is an upper bound, and that it may not be possible to create an image anywhere near that size (internal issue 284). Other Commits: * Fix various minor markup errors reported by validation scripts. * Change copyright from Khronos Free Use License to Apache 2.0 license on relevant script/XML/header files. This does not affect the specification source copyright.
2016-04-21 08:08:38 +00:00
The sname:VkClearAttachment structure is defined as:
Vulkan 1.0 branch 1.0 for release
2016-02-16 09:53:44 +00:00
Change log for July 22, 2016 Vulkan 1.0.22 spec update: * Bump API patch number and header version number to 22 for this update. Github Issues: * Translate the subpass self-dependency language into concrete validity statements, and added a validity statement about the restrictions on layout parameters (public issue 267). * Add validity requirement that slink:VkAttachmentDescription::pname:finalLayout and slink:VkAttachmentReference::pname:layout must not be ename:VK_IMAGE_LAYOUT_UNDEFINED or ename:VK_IMAGE_LAYOUT_PREINITIALIZED (public issue 268). * Clarify that slink:VkSubpassDescription::pname:pResolveAttachments layouts are used. Make language consistent with other attachment arrays (public issue 270). * Changed 64-bit definition for dname:VK_DEFINE_NON_DISPATCHABLE_HANDLE to work for x32 platform in +vk.xml+ and the resulting +vulkan.h+ (public issue 282). * Add missing error return code for flink:vkEnumerateInstanceExtensionProperties and flink:vkEnumerateDeviceExtensionProperties (public issue 285) * Fix several cases of stext::VkStructName.memberName markup to stext::VkStructName::pname:memberName, to match other usage in the spec, and describe this markup in the style guide (public issue 286). * Modified validity language generation script to avoid redundant common ancestor language if covered by generic parent language, and used `Both' instead of `Each' when appropriate (public issue 288). Internal Issues: * Add language about behavior of flink:vkAllocateDescriptorSets when allocation fails due to fragmentation, a new error ename:VK_ERROR_FRAGMENTED_POOL, and a Note explaining the situation (internal issue 309). * For the features of code:PointSize, code:ClipDistance, and code:CullDistance, the SPIR-V capability is required to be declared on use (read or write) rather than on decoration (internal issue 359). * Have desktop versions of GLSL respect precision qualification (code:mediump and code:lowp) when compiling for Vulkan. These will get translated to SPIR-V's code:RelaxedPrecision decoration as they do with OpenGL ES versions of GLSL (ESSL). The default precision of all types is code:highp when using a desktop version (internal issue 360). * Add validity statement for slink:VkImageCreateInfo specifying that multisampled images must be two-dimensional, optimally tiled, and with a single mipmap level (internal issue 369). * Add validity statements to slink:VkImageViewCreateInfo disallowing creation of images or image views with no supported features. Made some slink:VkImageViewCreateInfo validity statements more precise and consistent. Added a Note to the <<features,features>> chapter about formats with no features (internal issue 371). * Remove +manpages+ from default build targets. Nroff outputs containing imbedded latexmath will not render properly. Fixing this is a lot of work for limited use cases (internal issue 401). Other Commits: * Fix flink:vkRenderPassBeginInfo::pname:clearValueCount validity statement to be based on attachment indices rather than the number of cleared attachments (Vulkan-LoaderAndValidationLayers/issues/601). * Convert registry documentation from LaTeX to asciidoc source and rename from +src/spec/readme.tex+ to +src/spec/registry.txt+. * Fix lack of Oxford commas in validity language. * Lots of cleanup of generator scripts and Makefiles to move extension list for generator into the script arguments instead of the body of genvk.py, and express better dependencies between XML, scripts, and generated files.
2016-07-23 10:15:48 +00:00
include::../api/structs/VkClearAttachment.txt[]
Vulkan 1.0 branch 1.0 for release
2016-02-16 09:53:44 +00:00
* pname:aspectMask is a mask selecting the color, depth and/or stencil
Change log for September 23, 2016 Vulkan 1.0.28 spec update: * Bump API patch number and header version number to 28 for this update. Github Issues: * Minor spelling and typography cleanup, add definitions of ename:VK_FALSE and ename:VK_TRUE as just what their names say (public issues 220, 318, 325, 365; internal issues 451, 496) * Clarify that the pname:maxDescriptorSet limits in the <<features-limits-required,Required Limits>> table are n * maxPerStage limit (where n=number of supported stages) (public issue 254). * Minor cleanup to <<boilerplate-platform-macros,Platform-Specific Macro Definitions>> appendix (public issue 314). * Add valid usage statement to slink:VkPipelineLayoutCreateInfo disallowing multiple push constant ranges for the same shader stage (public issue 340). * Clarify the elink:VkSharingMode description of what executing the "same" barriers means in case of ownership transfer (public issue 347). * Rename copyright.txt and add COPYING.md to try and reduce confusion about applicable copyrights (public issue 350). * Extend the table in the <<boilerplate-wsi-header, Window System-Specific Header Control>> section to describe the external headers included when each etext:VK_USE_PLATFORM_* macro is defined (public issue 376). Internal Issues: * Add "Revision History" to the PDF outputs following the table of contents, to match HTML outputs (internal issue 43). * Clarified that flink:vkMapMemory may fail due to virtual address space limitations (internal issue 346). * Add +refBody+ comment markup for ref page autoextraction when required (internal issue 400). * Document proper use of "mipmap" and "mip" in the style guide API naming rules, matching the spelling rules (internal issue 471). * Tweak the <<extensions,Layers and Extensions>> appendix to note that the Specification may be built with arbitrary combinations of extensions (internal issue 483). * Remove incorrect statement allowing slink:VkClearAttachment::pname:colorAttachment to be >= slink:VkSubpassDescription::pname:colorAttachmentCount (internal issue 488). * The <<features-limits-viewportboundsrange,viewportBoundsRange>> is expressed in terms of the pname:maxViewportDimensions but this is actually two values. Clarify that it's based on the larger of the two (if they differ) (internal issue 499). Other Issues: * Reflowed text of the entire spec using the 'reflow' Makefile gater, to (hopefully) reduce future internal git churn as edits are made and extensions added in return for one-time pain. This has no perceptible change on the spec outputs but considerable changes on the asciidoc source (internal issue 367).
2016-09-24 07:58:11 +00:00
aspects of the attachment to be cleared.
pname:aspectMask can: include ename:VK_IMAGE_ASPECT_COLOR_BIT for color
attachments, ename:VK_IMAGE_ASPECT_DEPTH_BIT for depth/stencil
attachments with a depth component, and
ename:VK_IMAGE_ASPECT_STENCIL_BIT for depth/stencil attachments with a
stencil component.
If the subpass's depth/stencil attachment is ename:VK_ATTACHMENT_UNUSED,
then the clear has no effect.
Vulkan 1.0 branch 1.0 for release
2016-02-16 09:53:44 +00:00
* pname:colorAttachment is only meaningful if
ename:VK_IMAGE_ASPECT_COLOR_BIT is set in pname:aspectMask, in which
case it is an index to the pname:pColorAttachments array in the
slink:VkSubpassDescription structure of the current subpass which
Change log for September 23, 2016 Vulkan 1.0.28 spec update: * Bump API patch number and header version number to 28 for this update. Github Issues: * Minor spelling and typography cleanup, add definitions of ename:VK_FALSE and ename:VK_TRUE as just what their names say (public issues 220, 318, 325, 365; internal issues 451, 496) * Clarify that the pname:maxDescriptorSet limits in the <<features-limits-required,Required Limits>> table are n * maxPerStage limit (where n=number of supported stages) (public issue 254). * Minor cleanup to <<boilerplate-platform-macros,Platform-Specific Macro Definitions>> appendix (public issue 314). * Add valid usage statement to slink:VkPipelineLayoutCreateInfo disallowing multiple push constant ranges for the same shader stage (public issue 340). * Clarify the elink:VkSharingMode description of what executing the "same" barriers means in case of ownership transfer (public issue 347). * Rename copyright.txt and add COPYING.md to try and reduce confusion about applicable copyrights (public issue 350). * Extend the table in the <<boilerplate-wsi-header, Window System-Specific Header Control>> section to describe the external headers included when each etext:VK_USE_PLATFORM_* macro is defined (public issue 376). Internal Issues: * Add "Revision History" to the PDF outputs following the table of contents, to match HTML outputs (internal issue 43). * Clarified that flink:vkMapMemory may fail due to virtual address space limitations (internal issue 346). * Add +refBody+ comment markup for ref page autoextraction when required (internal issue 400). * Document proper use of "mipmap" and "mip" in the style guide API naming rules, matching the spelling rules (internal issue 471). * Tweak the <<extensions,Layers and Extensions>> appendix to note that the Specification may be built with arbitrary combinations of extensions (internal issue 483). * Remove incorrect statement allowing slink:VkClearAttachment::pname:colorAttachment to be >= slink:VkSubpassDescription::pname:colorAttachmentCount (internal issue 488). * The <<features-limits-viewportboundsrange,viewportBoundsRange>> is expressed in terms of the pname:maxViewportDimensions but this is actually two values. Clarify that it's based on the larger of the two (if they differ) (internal issue 499). Other Issues: * Reflowed text of the entire spec using the 'reflow' Makefile gater, to (hopefully) reduce future internal git churn as edits are made and extensions added in return for one-time pain. This has no perceptible change on the spec outputs but considerable changes on the asciidoc source (internal issue 367).
2016-09-24 07:58:11 +00:00
selects the color attachment to clear.
If pname:colorAttachment is ename:VK_ATTACHMENT_UNUSED then the clear
has no effect.
Vulkan 1.0 branch 1.0 for release
2016-02-16 09:53:44 +00:00
* pname:clearValue is the color or depth/stencil value to clear the
attachment to, as described in <<clears-values,Clear Values>> below.
No memory barriers are needed between fname:vkCmdClearAttachments and
preceding or subsequent draw or attachment clear commands in the same
subpass.
Change log for June 10, 2016 Vulkan 1.0.16 spec update: * Bump API patch number and header version number to 16 for this update. Github Issues: * Clarify that integer border values are meant to be 0/1, and that integer texture lookups are sign-extended in the <<textures-format-conversion,Format Conversion>> and <<textures-texel-replacement,Texel Replacement>> sections (public issue 52). * Add logic to generate spec boilerplate without using the 'git' command-line client, needed when building from a tarball or another source of the Vulkan tree rather than a cloned git repo. Remove boilerplate as part of 'clean' target (public issue 195). * Document that color writes and clears to unused attachments have no effect for slink:VkClearAttachment and elink:VkColorComponentFlagBits (public issue 198). * Fixed flink:vkCmdExecuteCommands validity statement for sname:VkCommandBufferInheritanceInfo::pname:framebuffer. If used, it must match the framebuffer in the current renderpass instance (public issue 226). * Added valid usage language to require for all functions that set dynamic state that the currently bound graphics pipeline has the corresponding dynamic state enabled (public issue 235). Internal Issues: * Clarify for flink:vkEnumerateInstanceExtensionProperties, in the <<extended-functionality-instance-extensions-and-devices, Instance Extensions and Device Extensions>> section, and in the <<glossary,Glossary>> section when functionality should be exposed as an instance extension, as a device extension, or as both (internal issue 109). * Place WorkgroupSize in alphabetical order in the <<interfaces-builtin-variables,Built-in Variables>> section (internal issue 323). * Corrects valid usage in vkEndRenderPass to only affect primary render passes, as secondaries may be entirely within a render pass, and should be able to be ended (previous language disallowed that) (internal issue 338). * Fix relational operator from <= to >= in the <<features-extentperimagetype,Allowed Extent Values>> section (internal issue 343). * Disallow recursion under SPIR-V entry points in the <<spirvenv-module-validation,Validation Rules within a Module>> section (internal SPIR-V issue 37). Other Commits: * Use standard Python ElementTree package instead of lxml.etree in header / validation layer / include autogeneration from XML, reducing platform dependencies.
2016-06-10 22:49:54 +00:00
The fname:vkCmdClearAttachments command is not affected by the bound
Vulkan 1.0 branch 1.0 for release
2016-02-16 09:53:44 +00:00
pipeline state.
Attachments can: also be cleared at the beginning of a render pass instance
by setting pname:loadOp (or pname:stencilLoadOp) of
slink:VkAttachmentDescription to ename:VK_ATTACHMENT_LOAD_OP_CLEAR, as
described for flink:vkCreateRenderPass.
Change log for September 30, 2016 Vulkan 1.0.29 spec update: * Bump API patch number and header version number to 29 for this update. Github Issues: * Remove redundant constraint on slink:VkCommandBufferInheritanceInfo::pname:queryFlags (public issue 224). * Fix typo and remove link in Note in the <<extended-functionality-instance-extensions-and-devices, Instance Extensions and Device Extensions>> section (public issue 359). * Fix erroneous validation statement for the pname:layout member of slink:VkComputePipelineCreateInfo (public issue 362). Internal Issues: * Restore long figure captions using asciidoc sidebar blocks, due to restrictions of asciidoc syntax (internal issue 101). * Replace most latexmath equations with comparable markup in straight asciidoc, which significantly improves time required to fully load and process the HTML forms of the Specification. There are known minor font and alignment inconsistencies with MathJax and PDF rendering of latexmath equations. Please do not file github issues about these. We are aware of the inconsistencies and will make refinements over time, while the performance improvements are compelling in at least some major browsers (internal issue 313). * Move handcoded validity statements from +vk.xml+ into the Specification body, easing work in the single-branch model. Specify the distinction between these explicit statements, and the implicit validity statements inferred from vk.xml. Validity statements now appear in two blocks for each command and structure - handcoded "Valid Usage" and the implicit "Valid Usage (Implicit)" (internal issue 392). * Add the +returnedonly="false"+ attribute to WSI output structures, removing incorrectly generated implicit validity statements for slink:VkDisplayPropertiesKHR, slink:VkDisplayPlanePropertiesKHR, slink:VkDisplayModePropertiesKHR, slink:VkDisplayPlaneCapabilitiesKHR, slink:VkSurfaceCapabilitiesKHR, and slink:VkSurfaceFormatKHR structures (internal issue 486). * Update slink:VkImageLayout to require the ename:VK_IMAGE_USAGE_SAMPLED_BIT be set for sampled depth/stencil images (internal issue 487). * Use an explicit format specifier string for the date command invocation in the +Makefile+ instead of the shorthand -R option, which doesn't work on BSD and MaxOS X date commands (internal issue 500). Other Issues: * Use the terms ``allocation scope'' and ``extension scope'' instead of just ``scope'', and add them to the glossary.
2016-10-01 04:13:37 +00:00
.Valid Usage
****
Change log for May 20, 2017 Vulkan 1.0.50 spec update: * Bump API patch number and header version number to 50 for this update. Github Issues: * Fix numerous minor issues with the VK_EXT_debug_report extension (public issues 478, 483, 486, 489, 490). Internal Issues: * Update flink:vkAllocateDescriptorSets to specify conditions under which to return ename:VK_ERROR_FRAGMENTED_POOL or ename:VK_ERROR_OUT_OF_POOL_MEMORY instead of out-of-host/out-of-device-memory, and improve the <<fundamentals-errorcodes, description of those errors (internal issue 654). * Add a NOTE documenting that flink:vkAcquireNextImageKHR can only signal a single semaphore, and how to deal with that when multiple physical devices in a logical device need to wait on it (internal issue 730). * Improve description of pname:pNext chains of slink:VkPhysicalDeviceImageFormatInfo2KHR and slink:VkImageFormatProperties2KHR (internal issue 814). * Clean up math markup issues in the <<textures, Image Operations>> chapter (internal issue 818). * Update validusage target to use more robust code for preprocessing, by making direct use of Asciidoctor's preprocessor. Added uniqueItems check to JSON vu schema and add clean_validusage target (internal issue 826). * Update style guide to prohibit writing non-self-contained (on a single bullet point) Valid Usage statements, and modify offending Valid Usage statements in the Specification to match, to assist with automatic extraction for the validation layers (internal issue 828). * Add ename:VK_VALIDATION_CHECK_SHADERS_EXT to elink:VkValidationCheckEXT of the `VK_EXT_validation_flags` extension, to selectively disable shader validation. * Remove duplicate valid usage statement for slink:VkImageMemoryBarrier. * Modify reflow.py script to place VUID tag anchors standalone on a line following their corresponding bullet point, and reflow the spec text accordingly (this had been pending since the initial tag deployment). New Extensions: * `VK_AMD_texture_gather_bias_lod`
2017-05-21 00:00:50 +00:00
* [[VUID-VkClearAttachment-aspectMask-00019]]
If pname:aspectMask includes ename:VK_IMAGE_ASPECT_COLOR_BIT, it must:
Change log for September 30, 2016 Vulkan 1.0.29 spec update: * Bump API patch number and header version number to 29 for this update. Github Issues: * Remove redundant constraint on slink:VkCommandBufferInheritanceInfo::pname:queryFlags (public issue 224). * Fix typo and remove link in Note in the <<extended-functionality-instance-extensions-and-devices, Instance Extensions and Device Extensions>> section (public issue 359). * Fix erroneous validation statement for the pname:layout member of slink:VkComputePipelineCreateInfo (public issue 362). Internal Issues: * Restore long figure captions using asciidoc sidebar blocks, due to restrictions of asciidoc syntax (internal issue 101). * Replace most latexmath equations with comparable markup in straight asciidoc, which significantly improves time required to fully load and process the HTML forms of the Specification. There are known minor font and alignment inconsistencies with MathJax and PDF rendering of latexmath equations. Please do not file github issues about these. We are aware of the inconsistencies and will make refinements over time, while the performance improvements are compelling in at least some major browsers (internal issue 313). * Move handcoded validity statements from +vk.xml+ into the Specification body, easing work in the single-branch model. Specify the distinction between these explicit statements, and the implicit validity statements inferred from vk.xml. Validity statements now appear in two blocks for each command and structure - handcoded "Valid Usage" and the implicit "Valid Usage (Implicit)" (internal issue 392). * Add the +returnedonly="false"+ attribute to WSI output structures, removing incorrectly generated implicit validity statements for slink:VkDisplayPropertiesKHR, slink:VkDisplayPlanePropertiesKHR, slink:VkDisplayModePropertiesKHR, slink:VkDisplayPlaneCapabilitiesKHR, slink:VkSurfaceCapabilitiesKHR, and slink:VkSurfaceFormatKHR structures (internal issue 486). * Update slink:VkImageLayout to require the ename:VK_IMAGE_USAGE_SAMPLED_BIT be set for sampled depth/stencil images (internal issue 487). * Use an explicit format specifier string for the date command invocation in the +Makefile+ instead of the shorthand -R option, which doesn't work on BSD and MaxOS X date commands (internal issue 500). Other Issues: * Use the terms ``allocation scope'' and ``extension scope'' instead of just ``scope'', and add them to the glossary.
2016-10-01 04:13:37 +00:00
not include ename:VK_IMAGE_ASPECT_DEPTH_BIT or
ename:VK_IMAGE_ASPECT_STENCIL_BIT
Change log for May 20, 2017 Vulkan 1.0.50 spec update: * Bump API patch number and header version number to 50 for this update. Github Issues: * Fix numerous minor issues with the VK_EXT_debug_report extension (public issues 478, 483, 486, 489, 490). Internal Issues: * Update flink:vkAllocateDescriptorSets to specify conditions under which to return ename:VK_ERROR_FRAGMENTED_POOL or ename:VK_ERROR_OUT_OF_POOL_MEMORY instead of out-of-host/out-of-device-memory, and improve the <<fundamentals-errorcodes, description of those errors (internal issue 654). * Add a NOTE documenting that flink:vkAcquireNextImageKHR can only signal a single semaphore, and how to deal with that when multiple physical devices in a logical device need to wait on it (internal issue 730). * Improve description of pname:pNext chains of slink:VkPhysicalDeviceImageFormatInfo2KHR and slink:VkImageFormatProperties2KHR (internal issue 814). * Clean up math markup issues in the <<textures, Image Operations>> chapter (internal issue 818). * Update validusage target to use more robust code for preprocessing, by making direct use of Asciidoctor's preprocessor. Added uniqueItems check to JSON vu schema and add clean_validusage target (internal issue 826). * Update style guide to prohibit writing non-self-contained (on a single bullet point) Valid Usage statements, and modify offending Valid Usage statements in the Specification to match, to assist with automatic extraction for the validation layers (internal issue 828). * Add ename:VK_VALIDATION_CHECK_SHADERS_EXT to elink:VkValidationCheckEXT of the `VK_EXT_validation_flags` extension, to selectively disable shader validation. * Remove duplicate valid usage statement for slink:VkImageMemoryBarrier. * Modify reflow.py script to place VUID tag anchors standalone on a line following their corresponding bullet point, and reflow the spec text accordingly (this had been pending since the initial tag deployment). New Extensions: * `VK_AMD_texture_gather_bias_lod`
2017-05-21 00:00:50 +00:00
* [[VUID-VkClearAttachment-aspectMask-00020]]
pname:aspectMask must: not include ename:VK_IMAGE_ASPECT_METADATA_BIT
* [[VUID-VkClearAttachment-clearValue-00021]]
pname:clearValue must: be a valid sname:VkClearValue union
Change log for September 30, 2016 Vulkan 1.0.29 spec update: * Bump API patch number and header version number to 29 for this update. Github Issues: * Remove redundant constraint on slink:VkCommandBufferInheritanceInfo::pname:queryFlags (public issue 224). * Fix typo and remove link in Note in the <<extended-functionality-instance-extensions-and-devices, Instance Extensions and Device Extensions>> section (public issue 359). * Fix erroneous validation statement for the pname:layout member of slink:VkComputePipelineCreateInfo (public issue 362). Internal Issues: * Restore long figure captions using asciidoc sidebar blocks, due to restrictions of asciidoc syntax (internal issue 101). * Replace most latexmath equations with comparable markup in straight asciidoc, which significantly improves time required to fully load and process the HTML forms of the Specification. There are known minor font and alignment inconsistencies with MathJax and PDF rendering of latexmath equations. Please do not file github issues about these. We are aware of the inconsistencies and will make refinements over time, while the performance improvements are compelling in at least some major browsers (internal issue 313). * Move handcoded validity statements from +vk.xml+ into the Specification body, easing work in the single-branch model. Specify the distinction between these explicit statements, and the implicit validity statements inferred from vk.xml. Validity statements now appear in two blocks for each command and structure - handcoded "Valid Usage" and the implicit "Valid Usage (Implicit)" (internal issue 392). * Add the +returnedonly="false"+ attribute to WSI output structures, removing incorrectly generated implicit validity statements for slink:VkDisplayPropertiesKHR, slink:VkDisplayPlanePropertiesKHR, slink:VkDisplayModePropertiesKHR, slink:VkDisplayPlaneCapabilitiesKHR, slink:VkSurfaceCapabilitiesKHR, and slink:VkSurfaceFormatKHR structures (internal issue 486). * Update slink:VkImageLayout to require the ename:VK_IMAGE_USAGE_SAMPLED_BIT be set for sampled depth/stencil images (internal issue 487). * Use an explicit format specifier string for the date command invocation in the +Makefile+ instead of the shorthand -R option, which doesn't work on BSD and MaxOS X date commands (internal issue 500). Other Issues: * Use the terms ``allocation scope'' and ``extension scope'' instead of just ``scope'', and add them to the glossary.
2016-10-01 04:13:37 +00:00
****
Vulkan 1.0 branch 1.0 for release
2016-02-16 09:53:44 +00:00
include::../validity/structs/VkClearAttachment.txt[]
[[clears-values]]
== Clear Values
Change log for September 16, 2016 Vulkan 1.0.27 spec update: * Bump API patch number and header version number to 27 for this update. Github Issues: * Weaken flink:vkGetPipelineCacheData invariance conditions; previous conditions were stronger than agreed and can't be guaranteed (public issue 280). * Add link to "Vulkan Loader Specification and Architecture Overview" document to Normative References section (public issue 359). Internal Issues: * Be more clear in the <<interfaces-resources-layout-std140, uniform buffer layout>> section that block offsets can be out of order (internal issue 396). * Document that extension authors should add support for their extensions to the validation layers (internal issue 398). * Clarify that the valid range of depth clear values should be limited to the 0..1 range and that copies to depth aspect must also be in this range (internal issue 412). * Specify ``a'' vs. ``an'' use in the style guide (internal issue 432). * Increase the maximum pname:nonCoherentAtomSize value in the <<features-limits-required,Required Limits>> section from 128 to 256 (internal issue 435). * Fix vk_platform.h for compiler errors on some Android platforms (internal issue 441). * Clarify that slink:VkPhysicalDeviceFeatures::pname:pEnabledFeatures == `NULL` disables all features, including the "required" feature pname:robustBufferAccess (internal issue 479). Other Issues: * Expand style guide and make it more self-consistent. * Use ISO 8601 date format everywhere. * Emphasise the correct way of using slink:VkSurfaceCapabilitiesKHR::pname:maxImageCount. * Added +VK_EXT_validation_flags+ extension for validation flag mechanism. * Fix an <<credits,author credit>> to include their current employer.
2016-09-17 04:22:17 +00:00
// refBegin VkClearColorValue Structure specifying a clear color value
Change log for July 10, 2016 Vulkan 1.0.20 spec update: * Bump API patch number and header version number to 20 for this update. Github Issues: * Replaced existing reference pages by text automatically extracted from the specification source, or generated from vk.xml in some cases. This isn't a complete solution for the reference pages, but puts them in a much better state. The ref pages (only) are now placed under a CC BY open source license, which is more current than the obsolete license previously used. Further improvements to the pages should not edit them directly, but instead concentrate on the specification source from which the ref pages are being extracted (public issues 44, 55, 160; internal issue 389).
2016-07-11 01:13:41 +00:00
Change log for April 22, 2016 Vulkan 1.0.11 spec update: * Bump API patch number and header version number to 11 for this update. Github Issues: * Clarify the WSI extension language by switching from the fuzzier "ownership" language to more-consistent "acquire" language (public issue 117). * Clarify that memory barriers apply to all commands in the dependency chains in the flink:vkGetRenderAreaGranularity command and the <<synchronization-execution-and-memory-dependencies,Execution And Memory Dependencies>> section (public issue 132). * Clarify that a queue family is a set of queues in the <<fundamentals-execmodel,Execution Model>> section (public issue 166). * Removed requirement from valid usage language that VkPresentInfoKHR::waitSemaphoreCount must be greater than 0 (public issue 171). * Fix broken internal links, describe structures consistently, use consistent style for SPIR-V codewords, and tag normative terms that were missing asciidoc tags (public issue 183 and ancillary markup/normative language fixes). * Fix typos for slink:VkPhysicalDeviceLimits member names in slink:VkImageCreateInfo validity language (public issue 184). Internal Issues: * Document that the requested patch version number specified as part of slink:VkApplicationInfo::pname:apiVersion is ignored when creating an instance (internal issue 176). * Clarify handling of extension structs in the <<fundamentals-validusageValid Usage>> section (internal issue 254). * Update required slink:VkImageFormatProperties::pname:maxMipLevels to be limited to the maximum allowed mipmap pyramid size corresponding to the actual maximum supported size for the format (internal issue 256). * Modify the <<features-extentperimagetype,Allowed Extent Values Based On Image Type>> section so the allowed maximum extent is the maximum image dimension supported for each dimension of the type of texture being queried (internal issue 257). * Clarify in the <<spirvenv-module-validation,Validation Rules within a Module>> section that at least one of the code:LocalSize execution mode or code:WorkgroupSize decoration is required for each compute shader entry point in a shader module (internal issue 279). * Add validity rules for formats in flink:vkCmdClearColorImage and flink:vkCmdClearDepthStencilImage (internal issue 283). * Clarify that slink:VkImageFormatProperties::pname:maxResourceSize is an upper bound, and that it may not be possible to create an image anywhere near that size (internal issue 284). Other Commits: * Fix various minor markup errors reported by validation scripts. * Change copyright from Khronos Free Use License to Apache 2.0 license on relevant script/XML/header files. This does not affect the specification source copyright.
2016-04-21 08:08:38 +00:00
The sname:VkClearColorValue structure is defined as:
Vulkan 1.0 branch 1.0 for release
2016-02-16 09:53:44 +00:00
Change log for July 22, 2016 Vulkan 1.0.22 spec update: * Bump API patch number and header version number to 22 for this update. Github Issues: * Translate the subpass self-dependency language into concrete validity statements, and added a validity statement about the restrictions on layout parameters (public issue 267). * Add validity requirement that slink:VkAttachmentDescription::pname:finalLayout and slink:VkAttachmentReference::pname:layout must not be ename:VK_IMAGE_LAYOUT_UNDEFINED or ename:VK_IMAGE_LAYOUT_PREINITIALIZED (public issue 268). * Clarify that slink:VkSubpassDescription::pname:pResolveAttachments layouts are used. Make language consistent with other attachment arrays (public issue 270). * Changed 64-bit definition for dname:VK_DEFINE_NON_DISPATCHABLE_HANDLE to work for x32 platform in +vk.xml+ and the resulting +vulkan.h+ (public issue 282). * Add missing error return code for flink:vkEnumerateInstanceExtensionProperties and flink:vkEnumerateDeviceExtensionProperties (public issue 285) * Fix several cases of stext::VkStructName.memberName markup to stext::VkStructName::pname:memberName, to match other usage in the spec, and describe this markup in the style guide (public issue 286). * Modified validity language generation script to avoid redundant common ancestor language if covered by generic parent language, and used `Both' instead of `Each' when appropriate (public issue 288). Internal Issues: * Add language about behavior of flink:vkAllocateDescriptorSets when allocation fails due to fragmentation, a new error ename:VK_ERROR_FRAGMENTED_POOL, and a Note explaining the situation (internal issue 309). * For the features of code:PointSize, code:ClipDistance, and code:CullDistance, the SPIR-V capability is required to be declared on use (read or write) rather than on decoration (internal issue 359). * Have desktop versions of GLSL respect precision qualification (code:mediump and code:lowp) when compiling for Vulkan. These will get translated to SPIR-V's code:RelaxedPrecision decoration as they do with OpenGL ES versions of GLSL (ESSL). The default precision of all types is code:highp when using a desktop version (internal issue 360). * Add validity statement for slink:VkImageCreateInfo specifying that multisampled images must be two-dimensional, optimally tiled, and with a single mipmap level (internal issue 369). * Add validity statements to slink:VkImageViewCreateInfo disallowing creation of images or image views with no supported features. Made some slink:VkImageViewCreateInfo validity statements more precise and consistent. Added a Note to the <<features,features>> chapter about formats with no features (internal issue 371). * Remove +manpages+ from default build targets. Nroff outputs containing imbedded latexmath will not render properly. Fixing this is a lot of work for limited use cases (internal issue 401). Other Commits: * Fix flink:vkRenderPassBeginInfo::pname:clearValueCount validity statement to be based on attachment indices rather than the number of cleared attachments (Vulkan-LoaderAndValidationLayers/issues/601). * Convert registry documentation from LaTeX to asciidoc source and rename from +src/spec/readme.tex+ to +src/spec/registry.txt+. * Fix lack of Oxford commas in validity language. * Lots of cleanup of generator scripts and Makefiles to move extension list for generator into the script arguments instead of the body of genvk.py, and express better dependencies between XML, scripts, and generated files.
2016-07-23 10:15:48 +00:00
include::../api/structs/VkClearColorValue.txt[]
Vulkan 1.0 branch 1.0 for release
2016-02-16 09:53:44 +00:00
Change log for July 10, 2016 Vulkan 1.0.20 spec update: * Bump API patch number and header version number to 20 for this update. Github Issues: * Replaced existing reference pages by text automatically extracted from the specification source, or generated from vk.xml in some cases. This isn't a complete solution for the reference pages, but puts them in a much better state. The ref pages (only) are now placed under a CC BY open source license, which is more current than the obsolete license previously used. Further improvements to the pages should not edit them directly, but instead concentrate on the specification source from which the ref pages are being extracted (public issues 44, 55, 160; internal issue 389).
2016-07-11 01:13:41 +00:00
* pname:float32 are the color clear values when the format of the image or
Change log for October 7, 2016 Vulkan 1.0.30 spec update: * Bump API patch number and header version number to 30 for this update. Github Issues: * Document missing pname:sType and pname:pNext parameters for slink:VkCommandBufferInheritanceInfo (public issue 224). * As promised, we are removing the example code, from the appendix, for the VK_KHR_surface and VK_KHR_swapchain extensions. The cube demo (shipped in the official Khronos SDK) has been updated, and is the example code that we want people to look at for how to use these two extensions (public issues 279, 308, and 311). * Clarify the formats for which the slink:VkClearColorValue pname:float32 member is used. Also clean up related language for flink:vkCmdBlitImage (public issue 369). * Reword the <<invariance, Invariance>> appendix chapter to better match Vulkan terminology (public issue 372). Internal Issues: * Update slink:VkMemoryRequirements to not require a host_visible memory type exists that can be bound to sparse buffers (internal issue 494). * Modify the <<features-supported-sample-counts,Supported Sample Counts>> language to allow multisampled depth-stencil images (internal issue 521).
2016-10-07 09:40:18 +00:00
attachment is one of the formats in the
<<features-formats-numericformat, Interpretation of Numeric Format>>
table other than signed integer (etext:SINT) or unsigned integer
(etext:UINT).
Change log for September 23, 2016 Vulkan 1.0.28 spec update: * Bump API patch number and header version number to 28 for this update. Github Issues: * Minor spelling and typography cleanup, add definitions of ename:VK_FALSE and ename:VK_TRUE as just what their names say (public issues 220, 318, 325, 365; internal issues 451, 496) * Clarify that the pname:maxDescriptorSet limits in the <<features-limits-required,Required Limits>> table are n * maxPerStage limit (where n=number of supported stages) (public issue 254). * Minor cleanup to <<boilerplate-platform-macros,Platform-Specific Macro Definitions>> appendix (public issue 314). * Add valid usage statement to slink:VkPipelineLayoutCreateInfo disallowing multiple push constant ranges for the same shader stage (public issue 340). * Clarify the elink:VkSharingMode description of what executing the "same" barriers means in case of ownership transfer (public issue 347). * Rename copyright.txt and add COPYING.md to try and reduce confusion about applicable copyrights (public issue 350). * Extend the table in the <<boilerplate-wsi-header, Window System-Specific Header Control>> section to describe the external headers included when each etext:VK_USE_PLATFORM_* macro is defined (public issue 376). Internal Issues: * Add "Revision History" to the PDF outputs following the table of contents, to match HTML outputs (internal issue 43). * Clarified that flink:vkMapMemory may fail due to virtual address space limitations (internal issue 346). * Add +refBody+ comment markup for ref page autoextraction when required (internal issue 400). * Document proper use of "mipmap" and "mip" in the style guide API naming rules, matching the spelling rules (internal issue 471). * Tweak the <<extensions,Layers and Extensions>> appendix to note that the Specification may be built with arbitrary combinations of extensions (internal issue 483). * Remove incorrect statement allowing slink:VkClearAttachment::pname:colorAttachment to be >= slink:VkSubpassDescription::pname:colorAttachmentCount (internal issue 488). * The <<features-limits-viewportboundsrange,viewportBoundsRange>> is expressed in terms of the pname:maxViewportDimensions but this is actually two values. Clarify that it's based on the larger of the two (if they differ) (internal issue 499). Other Issues: * Reflowed text of the entire spec using the 'reflow' Makefile gater, to (hopefully) reduce future internal git churn as edits are made and extensions added in return for one-time pain. This has no perceptible change on the spec outputs but considerable changes on the asciidoc source (internal issue 367).
2016-09-24 07:58:11 +00:00
Floating point values are automatically converted to the format of the
image, with the clear value being treated as linear if the image is
Change log for July 10, 2016 Vulkan 1.0.20 spec update: * Bump API patch number and header version number to 20 for this update. Github Issues: * Replaced existing reference pages by text automatically extracted from the specification source, or generated from vk.xml in some cases. This isn't a complete solution for the reference pages, but puts them in a much better state. The ref pages (only) are now placed under a CC BY open source license, which is more current than the obsolete license previously used. Further improvements to the pages should not edit them directly, but instead concentrate on the specification source from which the ref pages are being extracted (public issues 44, 55, 160; internal issue 389).
2016-07-11 01:13:41 +00:00
sRGB.
* pname:int32 are the color clear values when the format of the image or
Change log for October 7, 2016 Vulkan 1.0.30 spec update: * Bump API patch number and header version number to 30 for this update. Github Issues: * Document missing pname:sType and pname:pNext parameters for slink:VkCommandBufferInheritanceInfo (public issue 224). * As promised, we are removing the example code, from the appendix, for the VK_KHR_surface and VK_KHR_swapchain extensions. The cube demo (shipped in the official Khronos SDK) has been updated, and is the example code that we want people to look at for how to use these two extensions (public issues 279, 308, and 311). * Clarify the formats for which the slink:VkClearColorValue pname:float32 member is used. Also clean up related language for flink:vkCmdBlitImage (public issue 369). * Reword the <<invariance, Invariance>> appendix chapter to better match Vulkan terminology (public issue 372). Internal Issues: * Update slink:VkMemoryRequirements to not require a host_visible memory type exists that can be bound to sparse buffers (internal issue 494). * Modify the <<features-supported-sample-counts,Supported Sample Counts>> language to allow multisampled depth-stencil images (internal issue 521).
2016-10-07 09:40:18 +00:00
attachment is signed integer (etext:SINT).
Change log for September 23, 2016 Vulkan 1.0.28 spec update: * Bump API patch number and header version number to 28 for this update. Github Issues: * Minor spelling and typography cleanup, add definitions of ename:VK_FALSE and ename:VK_TRUE as just what their names say (public issues 220, 318, 325, 365; internal issues 451, 496) * Clarify that the pname:maxDescriptorSet limits in the <<features-limits-required,Required Limits>> table are n * maxPerStage limit (where n=number of supported stages) (public issue 254). * Minor cleanup to <<boilerplate-platform-macros,Platform-Specific Macro Definitions>> appendix (public issue 314). * Add valid usage statement to slink:VkPipelineLayoutCreateInfo disallowing multiple push constant ranges for the same shader stage (public issue 340). * Clarify the elink:VkSharingMode description of what executing the "same" barriers means in case of ownership transfer (public issue 347). * Rename copyright.txt and add COPYING.md to try and reduce confusion about applicable copyrights (public issue 350). * Extend the table in the <<boilerplate-wsi-header, Window System-Specific Header Control>> section to describe the external headers included when each etext:VK_USE_PLATFORM_* macro is defined (public issue 376). Internal Issues: * Add "Revision History" to the PDF outputs following the table of contents, to match HTML outputs (internal issue 43). * Clarified that flink:vkMapMemory may fail due to virtual address space limitations (internal issue 346). * Add +refBody+ comment markup for ref page autoextraction when required (internal issue 400). * Document proper use of "mipmap" and "mip" in the style guide API naming rules, matching the spelling rules (internal issue 471). * Tweak the <<extensions,Layers and Extensions>> appendix to note that the Specification may be built with arbitrary combinations of extensions (internal issue 483). * Remove incorrect statement allowing slink:VkClearAttachment::pname:colorAttachment to be >= slink:VkSubpassDescription::pname:colorAttachmentCount (internal issue 488). * The <<features-limits-viewportboundsrange,viewportBoundsRange>> is expressed in terms of the pname:maxViewportDimensions but this is actually two values. Clarify that it's based on the larger of the two (if they differ) (internal issue 499). Other Issues: * Reflowed text of the entire spec using the 'reflow' Makefile gater, to (hopefully) reduce future internal git churn as edits are made and extensions added in return for one-time pain. This has no perceptible change on the spec outputs but considerable changes on the asciidoc source (internal issue 367).
2016-09-24 07:58:11 +00:00
Signed integer values are converted to the format of the image by
casting to the smaller type (with negative 32-bit values mapping to
negative values in the smaller type).
If the integer clear value is not representable in the target type (e.g.
would overflow in conversion to that type), the clear value is
undefined.
Change log for July 10, 2016 Vulkan 1.0.20 spec update: * Bump API patch number and header version number to 20 for this update. Github Issues: * Replaced existing reference pages by text automatically extracted from the specification source, or generated from vk.xml in some cases. This isn't a complete solution for the reference pages, but puts them in a much better state. The ref pages (only) are now placed under a CC BY open source license, which is more current than the obsolete license previously used. Further improvements to the pages should not edit them directly, but instead concentrate on the specification source from which the ref pages are being extracted (public issues 44, 55, 160; internal issue 389).
2016-07-11 01:13:41 +00:00
* pname:uint32 are the color clear values when the format of the image or
Change log for October 7, 2016 Vulkan 1.0.30 spec update: * Bump API patch number and header version number to 30 for this update. Github Issues: * Document missing pname:sType and pname:pNext parameters for slink:VkCommandBufferInheritanceInfo (public issue 224). * As promised, we are removing the example code, from the appendix, for the VK_KHR_surface and VK_KHR_swapchain extensions. The cube demo (shipped in the official Khronos SDK) has been updated, and is the example code that we want people to look at for how to use these two extensions (public issues 279, 308, and 311). * Clarify the formats for which the slink:VkClearColorValue pname:float32 member is used. Also clean up related language for flink:vkCmdBlitImage (public issue 369). * Reword the <<invariance, Invariance>> appendix chapter to better match Vulkan terminology (public issue 372). Internal Issues: * Update slink:VkMemoryRequirements to not require a host_visible memory type exists that can be bound to sparse buffers (internal issue 494). * Modify the <<features-supported-sample-counts,Supported Sample Counts>> language to allow multisampled depth-stencil images (internal issue 521).
2016-10-07 09:40:18 +00:00
attachment is unsigned integer (etext:UINT).
Change log for September 23, 2016 Vulkan 1.0.28 spec update: * Bump API patch number and header version number to 28 for this update. Github Issues: * Minor spelling and typography cleanup, add definitions of ename:VK_FALSE and ename:VK_TRUE as just what their names say (public issues 220, 318, 325, 365; internal issues 451, 496) * Clarify that the pname:maxDescriptorSet limits in the <<features-limits-required,Required Limits>> table are n * maxPerStage limit (where n=number of supported stages) (public issue 254). * Minor cleanup to <<boilerplate-platform-macros,Platform-Specific Macro Definitions>> appendix (public issue 314). * Add valid usage statement to slink:VkPipelineLayoutCreateInfo disallowing multiple push constant ranges for the same shader stage (public issue 340). * Clarify the elink:VkSharingMode description of what executing the "same" barriers means in case of ownership transfer (public issue 347). * Rename copyright.txt and add COPYING.md to try and reduce confusion about applicable copyrights (public issue 350). * Extend the table in the <<boilerplate-wsi-header, Window System-Specific Header Control>> section to describe the external headers included when each etext:VK_USE_PLATFORM_* macro is defined (public issue 376). Internal Issues: * Add "Revision History" to the PDF outputs following the table of contents, to match HTML outputs (internal issue 43). * Clarified that flink:vkMapMemory may fail due to virtual address space limitations (internal issue 346). * Add +refBody+ comment markup for ref page autoextraction when required (internal issue 400). * Document proper use of "mipmap" and "mip" in the style guide API naming rules, matching the spelling rules (internal issue 471). * Tweak the <<extensions,Layers and Extensions>> appendix to note that the Specification may be built with arbitrary combinations of extensions (internal issue 483). * Remove incorrect statement allowing slink:VkClearAttachment::pname:colorAttachment to be >= slink:VkSubpassDescription::pname:colorAttachmentCount (internal issue 488). * The <<features-limits-viewportboundsrange,viewportBoundsRange>> is expressed in terms of the pname:maxViewportDimensions but this is actually two values. Clarify that it's based on the larger of the two (if they differ) (internal issue 499). Other Issues: * Reflowed text of the entire spec using the 'reflow' Makefile gater, to (hopefully) reduce future internal git churn as edits are made and extensions added in return for one-time pain. This has no perceptible change on the spec outputs but considerable changes on the asciidoc source (internal issue 367).
2016-09-24 07:58:11 +00:00
Unsigned integer values are converted to the format of the image by
casting to the integer type with fewer bits.
Vulkan 1.0 branch 1.0 for release
2016-02-16 09:53:44 +00:00
The four array elements of the clear color map to R, G, B, and A components
of image formats, in order.
If the image has more than one sample, the same value is written to all
Change log for April 22, 2016 Vulkan 1.0.11 spec update: * Bump API patch number and header version number to 11 for this update. Github Issues: * Clarify the WSI extension language by switching from the fuzzier "ownership" language to more-consistent "acquire" language (public issue 117). * Clarify that memory barriers apply to all commands in the dependency chains in the flink:vkGetRenderAreaGranularity command and the <<synchronization-execution-and-memory-dependencies,Execution And Memory Dependencies>> section (public issue 132). * Clarify that a queue family is a set of queues in the <<fundamentals-execmodel,Execution Model>> section (public issue 166). * Removed requirement from valid usage language that VkPresentInfoKHR::waitSemaphoreCount must be greater than 0 (public issue 171). * Fix broken internal links, describe structures consistently, use consistent style for SPIR-V codewords, and tag normative terms that were missing asciidoc tags (public issue 183 and ancillary markup/normative language fixes). * Fix typos for slink:VkPhysicalDeviceLimits member names in slink:VkImageCreateInfo validity language (public issue 184). Internal Issues: * Document that the requested patch version number specified as part of slink:VkApplicationInfo::pname:apiVersion is ignored when creating an instance (internal issue 176). * Clarify handling of extension structs in the <<fundamentals-validusageValid Usage>> section (internal issue 254). * Update required slink:VkImageFormatProperties::pname:maxMipLevels to be limited to the maximum allowed mipmap pyramid size corresponding to the actual maximum supported size for the format (internal issue 256). * Modify the <<features-extentperimagetype,Allowed Extent Values Based On Image Type>> section so the allowed maximum extent is the maximum image dimension supported for each dimension of the type of texture being queried (internal issue 257). * Clarify in the <<spirvenv-module-validation,Validation Rules within a Module>> section that at least one of the code:LocalSize execution mode or code:WorkgroupSize decoration is required for each compute shader entry point in a shader module (internal issue 279). * Add validity rules for formats in flink:vkCmdClearColorImage and flink:vkCmdClearDepthStencilImage (internal issue 283). * Clarify that slink:VkImageFormatProperties::pname:maxResourceSize is an upper bound, and that it may not be possible to create an image anywhere near that size (internal issue 284). Other Commits: * Fix various minor markup errors reported by validation scripts. * Change copyright from Khronos Free Use License to Apache 2.0 license on relevant script/XML/header files. This does not affect the specification source copyright.
2016-04-21 08:08:38 +00:00
samples for any pixels being cleared.
Vulkan 1.0 branch 1.0 for release
2016-02-16 09:53:44 +00:00
include::../validity/structs/VkClearColorValue.txt[]
Change log for September 16, 2016 Vulkan 1.0.27 spec update: * Bump API patch number and header version number to 27 for this update. Github Issues: * Weaken flink:vkGetPipelineCacheData invariance conditions; previous conditions were stronger than agreed and can't be guaranteed (public issue 280). * Add link to "Vulkan Loader Specification and Architecture Overview" document to Normative References section (public issue 359). Internal Issues: * Be more clear in the <<interfaces-resources-layout-std140, uniform buffer layout>> section that block offsets can be out of order (internal issue 396). * Document that extension authors should add support for their extensions to the validation layers (internal issue 398). * Clarify that the valid range of depth clear values should be limited to the 0..1 range and that copies to depth aspect must also be in this range (internal issue 412). * Specify ``a'' vs. ``an'' use in the style guide (internal issue 432). * Increase the maximum pname:nonCoherentAtomSize value in the <<features-limits-required,Required Limits>> section from 128 to 256 (internal issue 435). * Fix vk_platform.h for compiler errors on some Android platforms (internal issue 441). * Clarify that slink:VkPhysicalDeviceFeatures::pname:pEnabledFeatures == `NULL` disables all features, including the "required" feature pname:robustBufferAccess (internal issue 479). Other Issues: * Expand style guide and make it more self-consistent. * Use ISO 8601 date format everywhere. * Emphasise the correct way of using slink:VkSurfaceCapabilitiesKHR::pname:maxImageCount. * Added +VK_EXT_validation_flags+ extension for validation flag mechanism. * Fix an <<credits,author credit>> to include their current employer.
2016-09-17 04:22:17 +00:00
// refBegin VkClearDepthStencilValue Structure specifying a clear depth stencil value
Change log for July 10, 2016 Vulkan 1.0.20 spec update: * Bump API patch number and header version number to 20 for this update. Github Issues: * Replaced existing reference pages by text automatically extracted from the specification source, or generated from vk.xml in some cases. This isn't a complete solution for the reference pages, but puts them in a much better state. The ref pages (only) are now placed under a CC BY open source license, which is more current than the obsolete license previously used. Further improvements to the pages should not edit them directly, but instead concentrate on the specification source from which the ref pages are being extracted (public issues 44, 55, 160; internal issue 389).
2016-07-11 01:13:41 +00:00
Change log for April 22, 2016 Vulkan 1.0.11 spec update: * Bump API patch number and header version number to 11 for this update. Github Issues: * Clarify the WSI extension language by switching from the fuzzier "ownership" language to more-consistent "acquire" language (public issue 117). * Clarify that memory barriers apply to all commands in the dependency chains in the flink:vkGetRenderAreaGranularity command and the <<synchronization-execution-and-memory-dependencies,Execution And Memory Dependencies>> section (public issue 132). * Clarify that a queue family is a set of queues in the <<fundamentals-execmodel,Execution Model>> section (public issue 166). * Removed requirement from valid usage language that VkPresentInfoKHR::waitSemaphoreCount must be greater than 0 (public issue 171). * Fix broken internal links, describe structures consistently, use consistent style for SPIR-V codewords, and tag normative terms that were missing asciidoc tags (public issue 183 and ancillary markup/normative language fixes). * Fix typos for slink:VkPhysicalDeviceLimits member names in slink:VkImageCreateInfo validity language (public issue 184). Internal Issues: * Document that the requested patch version number specified as part of slink:VkApplicationInfo::pname:apiVersion is ignored when creating an instance (internal issue 176). * Clarify handling of extension structs in the <<fundamentals-validusageValid Usage>> section (internal issue 254). * Update required slink:VkImageFormatProperties::pname:maxMipLevels to be limited to the maximum allowed mipmap pyramid size corresponding to the actual maximum supported size for the format (internal issue 256). * Modify the <<features-extentperimagetype,Allowed Extent Values Based On Image Type>> section so the allowed maximum extent is the maximum image dimension supported for each dimension of the type of texture being queried (internal issue 257). * Clarify in the <<spirvenv-module-validation,Validation Rules within a Module>> section that at least one of the code:LocalSize execution mode or code:WorkgroupSize decoration is required for each compute shader entry point in a shader module (internal issue 279). * Add validity rules for formats in flink:vkCmdClearColorImage and flink:vkCmdClearDepthStencilImage (internal issue 283). * Clarify that slink:VkImageFormatProperties::pname:maxResourceSize is an upper bound, and that it may not be possible to create an image anywhere near that size (internal issue 284). Other Commits: * Fix various minor markup errors reported by validation scripts. * Change copyright from Khronos Free Use License to Apache 2.0 license on relevant script/XML/header files. This does not affect the specification source copyright.
2016-04-21 08:08:38 +00:00
The sname:VkClearDepthStencilValue structure is defined as:
Vulkan 1.0 branch 1.0 for release
2016-02-16 09:53:44 +00:00
Change log for July 22, 2016 Vulkan 1.0.22 spec update: * Bump API patch number and header version number to 22 for this update. Github Issues: * Translate the subpass self-dependency language into concrete validity statements, and added a validity statement about the restrictions on layout parameters (public issue 267). * Add validity requirement that slink:VkAttachmentDescription::pname:finalLayout and slink:VkAttachmentReference::pname:layout must not be ename:VK_IMAGE_LAYOUT_UNDEFINED or ename:VK_IMAGE_LAYOUT_PREINITIALIZED (public issue 268). * Clarify that slink:VkSubpassDescription::pname:pResolveAttachments layouts are used. Make language consistent with other attachment arrays (public issue 270). * Changed 64-bit definition for dname:VK_DEFINE_NON_DISPATCHABLE_HANDLE to work for x32 platform in +vk.xml+ and the resulting +vulkan.h+ (public issue 282). * Add missing error return code for flink:vkEnumerateInstanceExtensionProperties and flink:vkEnumerateDeviceExtensionProperties (public issue 285) * Fix several cases of stext::VkStructName.memberName markup to stext::VkStructName::pname:memberName, to match other usage in the spec, and describe this markup in the style guide (public issue 286). * Modified validity language generation script to avoid redundant common ancestor language if covered by generic parent language, and used `Both' instead of `Each' when appropriate (public issue 288). Internal Issues: * Add language about behavior of flink:vkAllocateDescriptorSets when allocation fails due to fragmentation, a new error ename:VK_ERROR_FRAGMENTED_POOL, and a Note explaining the situation (internal issue 309). * For the features of code:PointSize, code:ClipDistance, and code:CullDistance, the SPIR-V capability is required to be declared on use (read or write) rather than on decoration (internal issue 359). * Have desktop versions of GLSL respect precision qualification (code:mediump and code:lowp) when compiling for Vulkan. These will get translated to SPIR-V's code:RelaxedPrecision decoration as they do with OpenGL ES versions of GLSL (ESSL). The default precision of all types is code:highp when using a desktop version (internal issue 360). * Add validity statement for slink:VkImageCreateInfo specifying that multisampled images must be two-dimensional, optimally tiled, and with a single mipmap level (internal issue 369). * Add validity statements to slink:VkImageViewCreateInfo disallowing creation of images or image views with no supported features. Made some slink:VkImageViewCreateInfo validity statements more precise and consistent. Added a Note to the <<features,features>> chapter about formats with no features (internal issue 371). * Remove +manpages+ from default build targets. Nroff outputs containing imbedded latexmath will not render properly. Fixing this is a lot of work for limited use cases (internal issue 401). Other Commits: * Fix flink:vkRenderPassBeginInfo::pname:clearValueCount validity statement to be based on attachment indices rather than the number of cleared attachments (Vulkan-LoaderAndValidationLayers/issues/601). * Convert registry documentation from LaTeX to asciidoc source and rename from +src/spec/readme.tex+ to +src/spec/registry.txt+. * Fix lack of Oxford commas in validity language. * Lots of cleanup of generator scripts and Makefiles to move extension list for generator into the script arguments instead of the body of genvk.py, and express better dependencies between XML, scripts, and generated files.
2016-07-23 10:15:48 +00:00
include::../api/structs/VkClearDepthStencilValue.txt[]
Vulkan 1.0 branch 1.0 for release
2016-02-16 09:53:44 +00:00
* pname:depth is the clear value for the depth aspect of the depth/stencil
Change log for September 23, 2016 Vulkan 1.0.28 spec update: * Bump API patch number and header version number to 28 for this update. Github Issues: * Minor spelling and typography cleanup, add definitions of ename:VK_FALSE and ename:VK_TRUE as just what their names say (public issues 220, 318, 325, 365; internal issues 451, 496) * Clarify that the pname:maxDescriptorSet limits in the <<features-limits-required,Required Limits>> table are n * maxPerStage limit (where n=number of supported stages) (public issue 254). * Minor cleanup to <<boilerplate-platform-macros,Platform-Specific Macro Definitions>> appendix (public issue 314). * Add valid usage statement to slink:VkPipelineLayoutCreateInfo disallowing multiple push constant ranges for the same shader stage (public issue 340). * Clarify the elink:VkSharingMode description of what executing the "same" barriers means in case of ownership transfer (public issue 347). * Rename copyright.txt and add COPYING.md to try and reduce confusion about applicable copyrights (public issue 350). * Extend the table in the <<boilerplate-wsi-header, Window System-Specific Header Control>> section to describe the external headers included when each etext:VK_USE_PLATFORM_* macro is defined (public issue 376). Internal Issues: * Add "Revision History" to the PDF outputs following the table of contents, to match HTML outputs (internal issue 43). * Clarified that flink:vkMapMemory may fail due to virtual address space limitations (internal issue 346). * Add +refBody+ comment markup for ref page autoextraction when required (internal issue 400). * Document proper use of "mipmap" and "mip" in the style guide API naming rules, matching the spelling rules (internal issue 471). * Tweak the <<extensions,Layers and Extensions>> appendix to note that the Specification may be built with arbitrary combinations of extensions (internal issue 483). * Remove incorrect statement allowing slink:VkClearAttachment::pname:colorAttachment to be >= slink:VkSubpassDescription::pname:colorAttachmentCount (internal issue 488). * The <<features-limits-viewportboundsrange,viewportBoundsRange>> is expressed in terms of the pname:maxViewportDimensions but this is actually two values. Clarify that it's based on the larger of the two (if they differ) (internal issue 499). Other Issues: * Reflowed text of the entire spec using the 'reflow' Makefile gater, to (hopefully) reduce future internal git churn as edits are made and extensions added in return for one-time pain. This has no perceptible change on the spec outputs but considerable changes on the asciidoc source (internal issue 367).
2016-09-24 07:58:11 +00:00
attachment.
It is a floating-point value which is automatically converted to the
attachment's format.
Vulkan 1.0 branch 1.0 for release
2016-02-16 09:53:44 +00:00
* pname:stencil is the clear value for the stencil aspect of the
Change log for September 23, 2016 Vulkan 1.0.28 spec update: * Bump API patch number and header version number to 28 for this update. Github Issues: * Minor spelling and typography cleanup, add definitions of ename:VK_FALSE and ename:VK_TRUE as just what their names say (public issues 220, 318, 325, 365; internal issues 451, 496) * Clarify that the pname:maxDescriptorSet limits in the <<features-limits-required,Required Limits>> table are n * maxPerStage limit (where n=number of supported stages) (public issue 254). * Minor cleanup to <<boilerplate-platform-macros,Platform-Specific Macro Definitions>> appendix (public issue 314). * Add valid usage statement to slink:VkPipelineLayoutCreateInfo disallowing multiple push constant ranges for the same shader stage (public issue 340). * Clarify the elink:VkSharingMode description of what executing the "same" barriers means in case of ownership transfer (public issue 347). * Rename copyright.txt and add COPYING.md to try and reduce confusion about applicable copyrights (public issue 350). * Extend the table in the <<boilerplate-wsi-header, Window System-Specific Header Control>> section to describe the external headers included when each etext:VK_USE_PLATFORM_* macro is defined (public issue 376). Internal Issues: * Add "Revision History" to the PDF outputs following the table of contents, to match HTML outputs (internal issue 43). * Clarified that flink:vkMapMemory may fail due to virtual address space limitations (internal issue 346). * Add +refBody+ comment markup for ref page autoextraction when required (internal issue 400). * Document proper use of "mipmap" and "mip" in the style guide API naming rules, matching the spelling rules (internal issue 471). * Tweak the <<extensions,Layers and Extensions>> appendix to note that the Specification may be built with arbitrary combinations of extensions (internal issue 483). * Remove incorrect statement allowing slink:VkClearAttachment::pname:colorAttachment to be >= slink:VkSubpassDescription::pname:colorAttachmentCount (internal issue 488). * The <<features-limits-viewportboundsrange,viewportBoundsRange>> is expressed in terms of the pname:maxViewportDimensions but this is actually two values. Clarify that it's based on the larger of the two (if they differ) (internal issue 499). Other Issues: * Reflowed text of the entire spec using the 'reflow' Makefile gater, to (hopefully) reduce future internal git churn as edits are made and extensions added in return for one-time pain. This has no perceptible change on the spec outputs but considerable changes on the asciidoc source (internal issue 367).
2016-09-24 07:58:11 +00:00
depth/stencil attachment.
It is a 32-bit integer value which is converted to the attachment's
format by taking the appropriate number of LSBs.
Vulkan 1.0 branch 1.0 for release
2016-02-16 09:53:44 +00:00
Change log for September 30, 2016 Vulkan 1.0.29 spec update: * Bump API patch number and header version number to 29 for this update. Github Issues: * Remove redundant constraint on slink:VkCommandBufferInheritanceInfo::pname:queryFlags (public issue 224). * Fix typo and remove link in Note in the <<extended-functionality-instance-extensions-and-devices, Instance Extensions and Device Extensions>> section (public issue 359). * Fix erroneous validation statement for the pname:layout member of slink:VkComputePipelineCreateInfo (public issue 362). Internal Issues: * Restore long figure captions using asciidoc sidebar blocks, due to restrictions of asciidoc syntax (internal issue 101). * Replace most latexmath equations with comparable markup in straight asciidoc, which significantly improves time required to fully load and process the HTML forms of the Specification. There are known minor font and alignment inconsistencies with MathJax and PDF rendering of latexmath equations. Please do not file github issues about these. We are aware of the inconsistencies and will make refinements over time, while the performance improvements are compelling in at least some major browsers (internal issue 313). * Move handcoded validity statements from +vk.xml+ into the Specification body, easing work in the single-branch model. Specify the distinction between these explicit statements, and the implicit validity statements inferred from vk.xml. Validity statements now appear in two blocks for each command and structure - handcoded "Valid Usage" and the implicit "Valid Usage (Implicit)" (internal issue 392). * Add the +returnedonly="false"+ attribute to WSI output structures, removing incorrectly generated implicit validity statements for slink:VkDisplayPropertiesKHR, slink:VkDisplayPlanePropertiesKHR, slink:VkDisplayModePropertiesKHR, slink:VkDisplayPlaneCapabilitiesKHR, slink:VkSurfaceCapabilitiesKHR, and slink:VkSurfaceFormatKHR structures (internal issue 486). * Update slink:VkImageLayout to require the ename:VK_IMAGE_USAGE_SAMPLED_BIT be set for sampled depth/stencil images (internal issue 487). * Use an explicit format specifier string for the date command invocation in the +Makefile+ instead of the shorthand -R option, which doesn't work on BSD and MaxOS X date commands (internal issue 500). Other Issues: * Use the terms ``allocation scope'' and ``extension scope'' instead of just ``scope'', and add them to the glossary.
2016-10-01 04:13:37 +00:00
.Valid Usage
****
Change log for May 20, 2017 Vulkan 1.0.50 spec update: * Bump API patch number and header version number to 50 for this update. Github Issues: * Fix numerous minor issues with the VK_EXT_debug_report extension (public issues 478, 483, 486, 489, 490). Internal Issues: * Update flink:vkAllocateDescriptorSets to specify conditions under which to return ename:VK_ERROR_FRAGMENTED_POOL or ename:VK_ERROR_OUT_OF_POOL_MEMORY instead of out-of-host/out-of-device-memory, and improve the <<fundamentals-errorcodes, description of those errors (internal issue 654). * Add a NOTE documenting that flink:vkAcquireNextImageKHR can only signal a single semaphore, and how to deal with that when multiple physical devices in a logical device need to wait on it (internal issue 730). * Improve description of pname:pNext chains of slink:VkPhysicalDeviceImageFormatInfo2KHR and slink:VkImageFormatProperties2KHR (internal issue 814). * Clean up math markup issues in the <<textures, Image Operations>> chapter (internal issue 818). * Update validusage target to use more robust code for preprocessing, by making direct use of Asciidoctor's preprocessor. Added uniqueItems check to JSON vu schema and add clean_validusage target (internal issue 826). * Update style guide to prohibit writing non-self-contained (on a single bullet point) Valid Usage statements, and modify offending Valid Usage statements in the Specification to match, to assist with automatic extraction for the validation layers (internal issue 828). * Add ename:VK_VALIDATION_CHECK_SHADERS_EXT to elink:VkValidationCheckEXT of the `VK_EXT_validation_flags` extension, to selectively disable shader validation. * Remove duplicate valid usage statement for slink:VkImageMemoryBarrier. * Modify reflow.py script to place VUID tag anchors standalone on a line following their corresponding bullet point, and reflow the spec text accordingly (this had been pending since the initial tag deployment). New Extensions: * `VK_AMD_texture_gather_bias_lod`
2017-05-21 00:00:50 +00:00
* [[VUID-VkClearDepthStencilValue-depth-00022]]
pname:depth must: be between `0.0` and `1.0`, inclusive
Change log for September 30, 2016 Vulkan 1.0.29 spec update: * Bump API patch number and header version number to 29 for this update. Github Issues: * Remove redundant constraint on slink:VkCommandBufferInheritanceInfo::pname:queryFlags (public issue 224). * Fix typo and remove link in Note in the <<extended-functionality-instance-extensions-and-devices, Instance Extensions and Device Extensions>> section (public issue 359). * Fix erroneous validation statement for the pname:layout member of slink:VkComputePipelineCreateInfo (public issue 362). Internal Issues: * Restore long figure captions using asciidoc sidebar blocks, due to restrictions of asciidoc syntax (internal issue 101). * Replace most latexmath equations with comparable markup in straight asciidoc, which significantly improves time required to fully load and process the HTML forms of the Specification. There are known minor font and alignment inconsistencies with MathJax and PDF rendering of latexmath equations. Please do not file github issues about these. We are aware of the inconsistencies and will make refinements over time, while the performance improvements are compelling in at least some major browsers (internal issue 313). * Move handcoded validity statements from +vk.xml+ into the Specification body, easing work in the single-branch model. Specify the distinction between these explicit statements, and the implicit validity statements inferred from vk.xml. Validity statements now appear in two blocks for each command and structure - handcoded "Valid Usage" and the implicit "Valid Usage (Implicit)" (internal issue 392). * Add the +returnedonly="false"+ attribute to WSI output structures, removing incorrectly generated implicit validity statements for slink:VkDisplayPropertiesKHR, slink:VkDisplayPlanePropertiesKHR, slink:VkDisplayModePropertiesKHR, slink:VkDisplayPlaneCapabilitiesKHR, slink:VkSurfaceCapabilitiesKHR, and slink:VkSurfaceFormatKHR structures (internal issue 486). * Update slink:VkImageLayout to require the ename:VK_IMAGE_USAGE_SAMPLED_BIT be set for sampled depth/stencil images (internal issue 487). * Use an explicit format specifier string for the date command invocation in the +Makefile+ instead of the shorthand -R option, which doesn't work on BSD and MaxOS X date commands (internal issue 500). Other Issues: * Use the terms ``allocation scope'' and ``extension scope'' instead of just ``scope'', and add them to the glossary.
2016-10-01 04:13:37 +00:00
****
Vulkan 1.0 branch 1.0 for release
2016-02-16 09:53:44 +00:00
include::../validity/structs/VkClearDepthStencilValue.txt[]
Change log for September 16, 2016 Vulkan 1.0.27 spec update: * Bump API patch number and header version number to 27 for this update. Github Issues: * Weaken flink:vkGetPipelineCacheData invariance conditions; previous conditions were stronger than agreed and can't be guaranteed (public issue 280). * Add link to "Vulkan Loader Specification and Architecture Overview" document to Normative References section (public issue 359). Internal Issues: * Be more clear in the <<interfaces-resources-layout-std140, uniform buffer layout>> section that block offsets can be out of order (internal issue 396). * Document that extension authors should add support for their extensions to the validation layers (internal issue 398). * Clarify that the valid range of depth clear values should be limited to the 0..1 range and that copies to depth aspect must also be in this range (internal issue 412). * Specify ``a'' vs. ``an'' use in the style guide (internal issue 432). * Increase the maximum pname:nonCoherentAtomSize value in the <<features-limits-required,Required Limits>> section from 128 to 256 (internal issue 435). * Fix vk_platform.h for compiler errors on some Android platforms (internal issue 441). * Clarify that slink:VkPhysicalDeviceFeatures::pname:pEnabledFeatures == `NULL` disables all features, including the "required" feature pname:robustBufferAccess (internal issue 479). Other Issues: * Expand style guide and make it more self-consistent. * Use ISO 8601 date format everywhere. * Emphasise the correct way of using slink:VkSurfaceCapabilitiesKHR::pname:maxImageCount. * Added +VK_EXT_validation_flags+ extension for validation flag mechanism. * Fix an <<credits,author credit>> to include their current employer.
2016-09-17 04:22:17 +00:00
// refBegin VkClearValue Structure specifying a clear value
Change log for April 22, 2016 Vulkan 1.0.11 spec update: * Bump API patch number and header version number to 11 for this update. Github Issues: * Clarify the WSI extension language by switching from the fuzzier "ownership" language to more-consistent "acquire" language (public issue 117). * Clarify that memory barriers apply to all commands in the dependency chains in the flink:vkGetRenderAreaGranularity command and the <<synchronization-execution-and-memory-dependencies,Execution And Memory Dependencies>> section (public issue 132). * Clarify that a queue family is a set of queues in the <<fundamentals-execmodel,Execution Model>> section (public issue 166). * Removed requirement from valid usage language that VkPresentInfoKHR::waitSemaphoreCount must be greater than 0 (public issue 171). * Fix broken internal links, describe structures consistently, use consistent style for SPIR-V codewords, and tag normative terms that were missing asciidoc tags (public issue 183 and ancillary markup/normative language fixes). * Fix typos for slink:VkPhysicalDeviceLimits member names in slink:VkImageCreateInfo validity language (public issue 184). Internal Issues: * Document that the requested patch version number specified as part of slink:VkApplicationInfo::pname:apiVersion is ignored when creating an instance (internal issue 176). * Clarify handling of extension structs in the <<fundamentals-validusageValid Usage>> section (internal issue 254). * Update required slink:VkImageFormatProperties::pname:maxMipLevels to be limited to the maximum allowed mipmap pyramid size corresponding to the actual maximum supported size for the format (internal issue 256). * Modify the <<features-extentperimagetype,Allowed Extent Values Based On Image Type>> section so the allowed maximum extent is the maximum image dimension supported for each dimension of the type of texture being queried (internal issue 257). * Clarify in the <<spirvenv-module-validation,Validation Rules within a Module>> section that at least one of the code:LocalSize execution mode or code:WorkgroupSize decoration is required for each compute shader entry point in a shader module (internal issue 279). * Add validity rules for formats in flink:vkCmdClearColorImage and flink:vkCmdClearDepthStencilImage (internal issue 283). * Clarify that slink:VkImageFormatProperties::pname:maxResourceSize is an upper bound, and that it may not be possible to create an image anywhere near that size (internal issue 284). Other Commits: * Fix various minor markup errors reported by validation scripts. * Change copyright from Khronos Free Use License to Apache 2.0 license on relevant script/XML/header files. This does not affect the specification source copyright.
2016-04-21 08:08:38 +00:00
The sname:VkClearValue union is defined as:
Vulkan 1.0 branch 1.0 for release
2016-02-16 09:53:44 +00:00
Change log for July 22, 2016 Vulkan 1.0.22 spec update: * Bump API patch number and header version number to 22 for this update. Github Issues: * Translate the subpass self-dependency language into concrete validity statements, and added a validity statement about the restrictions on layout parameters (public issue 267). * Add validity requirement that slink:VkAttachmentDescription::pname:finalLayout and slink:VkAttachmentReference::pname:layout must not be ename:VK_IMAGE_LAYOUT_UNDEFINED or ename:VK_IMAGE_LAYOUT_PREINITIALIZED (public issue 268). * Clarify that slink:VkSubpassDescription::pname:pResolveAttachments layouts are used. Make language consistent with other attachment arrays (public issue 270). * Changed 64-bit definition for dname:VK_DEFINE_NON_DISPATCHABLE_HANDLE to work for x32 platform in +vk.xml+ and the resulting +vulkan.h+ (public issue 282). * Add missing error return code for flink:vkEnumerateInstanceExtensionProperties and flink:vkEnumerateDeviceExtensionProperties (public issue 285) * Fix several cases of stext::VkStructName.memberName markup to stext::VkStructName::pname:memberName, to match other usage in the spec, and describe this markup in the style guide (public issue 286). * Modified validity language generation script to avoid redundant common ancestor language if covered by generic parent language, and used `Both' instead of `Each' when appropriate (public issue 288). Internal Issues: * Add language about behavior of flink:vkAllocateDescriptorSets when allocation fails due to fragmentation, a new error ename:VK_ERROR_FRAGMENTED_POOL, and a Note explaining the situation (internal issue 309). * For the features of code:PointSize, code:ClipDistance, and code:CullDistance, the SPIR-V capability is required to be declared on use (read or write) rather than on decoration (internal issue 359). * Have desktop versions of GLSL respect precision qualification (code:mediump and code:lowp) when compiling for Vulkan. These will get translated to SPIR-V's code:RelaxedPrecision decoration as they do with OpenGL ES versions of GLSL (ESSL). The default precision of all types is code:highp when using a desktop version (internal issue 360). * Add validity statement for slink:VkImageCreateInfo specifying that multisampled images must be two-dimensional, optimally tiled, and with a single mipmap level (internal issue 369). * Add validity statements to slink:VkImageViewCreateInfo disallowing creation of images or image views with no supported features. Made some slink:VkImageViewCreateInfo validity statements more precise and consistent. Added a Note to the <<features,features>> chapter about formats with no features (internal issue 371). * Remove +manpages+ from default build targets. Nroff outputs containing imbedded latexmath will not render properly. Fixing this is a lot of work for limited use cases (internal issue 401). Other Commits: * Fix flink:vkRenderPassBeginInfo::pname:clearValueCount validity statement to be based on attachment indices rather than the number of cleared attachments (Vulkan-LoaderAndValidationLayers/issues/601). * Convert registry documentation from LaTeX to asciidoc source and rename from +src/spec/readme.tex+ to +src/spec/registry.txt+. * Fix lack of Oxford commas in validity language. * Lots of cleanup of generator scripts and Makefiles to move extension list for generator into the script arguments instead of the body of genvk.py, and express better dependencies between XML, scripts, and generated files.
2016-07-23 10:15:48 +00:00
include::../api/structs/VkClearValue.txt[]
Vulkan 1.0 branch 1.0 for release
2016-02-16 09:53:44 +00:00
Change log for September 23, 2016 Vulkan 1.0.28 spec update: * Bump API patch number and header version number to 28 for this update. Github Issues: * Minor spelling and typography cleanup, add definitions of ename:VK_FALSE and ename:VK_TRUE as just what their names say (public issues 220, 318, 325, 365; internal issues 451, 496) * Clarify that the pname:maxDescriptorSet limits in the <<features-limits-required,Required Limits>> table are n * maxPerStage limit (where n=number of supported stages) (public issue 254). * Minor cleanup to <<boilerplate-platform-macros,Platform-Specific Macro Definitions>> appendix (public issue 314). * Add valid usage statement to slink:VkPipelineLayoutCreateInfo disallowing multiple push constant ranges for the same shader stage (public issue 340). * Clarify the elink:VkSharingMode description of what executing the "same" barriers means in case of ownership transfer (public issue 347). * Rename copyright.txt and add COPYING.md to try and reduce confusion about applicable copyrights (public issue 350). * Extend the table in the <<boilerplate-wsi-header, Window System-Specific Header Control>> section to describe the external headers included when each etext:VK_USE_PLATFORM_* macro is defined (public issue 376). Internal Issues: * Add "Revision History" to the PDF outputs following the table of contents, to match HTML outputs (internal issue 43). * Clarified that flink:vkMapMemory may fail due to virtual address space limitations (internal issue 346). * Add +refBody+ comment markup for ref page autoextraction when required (internal issue 400). * Document proper use of "mipmap" and "mip" in the style guide API naming rules, matching the spelling rules (internal issue 471). * Tweak the <<extensions,Layers and Extensions>> appendix to note that the Specification may be built with arbitrary combinations of extensions (internal issue 483). * Remove incorrect statement allowing slink:VkClearAttachment::pname:colorAttachment to be >= slink:VkSubpassDescription::pname:colorAttachmentCount (internal issue 488). * The <<features-limits-viewportboundsrange,viewportBoundsRange>> is expressed in terms of the pname:maxViewportDimensions but this is actually two values. Clarify that it's based on the larger of the two (if they differ) (internal issue 499). Other Issues: * Reflowed text of the entire spec using the 'reflow' Makefile gater, to (hopefully) reduce future internal git churn as edits are made and extensions added in return for one-time pain. This has no perceptible change on the spec outputs but considerable changes on the asciidoc source (internal issue 367).
2016-09-24 07:58:11 +00:00
* pname:color specifies the color image clear values to use when clearing
a color image or attachment.
Vulkan 1.0 branch 1.0 for release
2016-02-16 09:53:44 +00:00
* pname:depthStencil specifies the depth and stencil clear values to use
when clearing a depth/stencil image or attachment.
Change log for July 10, 2016 Vulkan 1.0.20 spec update: * Bump API patch number and header version number to 20 for this update. Github Issues: * Replaced existing reference pages by text automatically extracted from the specification source, or generated from vk.xml in some cases. This isn't a complete solution for the reference pages, but puts them in a much better state. The ref pages (only) are now placed under a CC BY open source license, which is more current than the obsolete license previously used. Further improvements to the pages should not edit them directly, but instead concentrate on the specification source from which the ref pages are being extracted (public issues 44, 55, 160; internal issue 389).
2016-07-11 01:13:41 +00:00
This union is used where part of the API requires either color or
depth/stencil clear values, depending on the attachment, and defines the
initial clear values in the slink:VkRenderPassBeginInfo structure.
Vulkan 1.0 branch 1.0 for release
2016-02-16 09:53:44 +00:00
Change log for October 25, 2016 Vulkan 1.0.32 spec update: * Bump API patch number and header version number to 32 for this update. Github Issues: * Add automatic visibility operations to the presentation engineE when doing a queue present in flink:vkAcquireNextImageKHR. Removed all references to MEMORY_READ that referenced WSI - they no longer make sense (some aspects of public issues 128, 131, 132, 261, and 298). * Document valid non-boolean +externsync+ attribute values for <param> tags in +vk.xml+ (public issue 265). * Add valid usage to slink:VkImageCreateInfo requiring that pname:arrayLayers be 1 for images of type ename:VK_IMAGE_TYPE_3D (public issue 319). * Add missing captions to figures in the <<textures,Image Operations>> chapter (public issue 334). * Clarify WSI interaction with exclusive sharing mode (public issue 344). * Added explicit language clarifying the allowed queue usage of resources created with ename:VK_SHARING_MODE_CONCURRENT (public issue 386). * Require that the slink:VkDescriptorSetLayoutCreateInfo::pname:binding members of the pname:pBindings array passed to flink:vkDescriptorSetLayoutCreateInfo all be distinct (public issue 391). Internal Issues: * Remove empty validity blocks from +vk.xml+ and suppressed broken validity statements and added missing statements to explicit validity. Doesn't affect output, other than some statements appearing in another block now (internal issue 513).
2016-10-25 05:22:26 +00:00
.Valid Usage
****
Change log for May 20, 2017 Vulkan 1.0.50 spec update: * Bump API patch number and header version number to 50 for this update. Github Issues: * Fix numerous minor issues with the VK_EXT_debug_report extension (public issues 478, 483, 486, 489, 490). Internal Issues: * Update flink:vkAllocateDescriptorSets to specify conditions under which to return ename:VK_ERROR_FRAGMENTED_POOL or ename:VK_ERROR_OUT_OF_POOL_MEMORY instead of out-of-host/out-of-device-memory, and improve the <<fundamentals-errorcodes, description of those errors (internal issue 654). * Add a NOTE documenting that flink:vkAcquireNextImageKHR can only signal a single semaphore, and how to deal with that when multiple physical devices in a logical device need to wait on it (internal issue 730). * Improve description of pname:pNext chains of slink:VkPhysicalDeviceImageFormatInfo2KHR and slink:VkImageFormatProperties2KHR (internal issue 814). * Clean up math markup issues in the <<textures, Image Operations>> chapter (internal issue 818). * Update validusage target to use more robust code for preprocessing, by making direct use of Asciidoctor's preprocessor. Added uniqueItems check to JSON vu schema and add clean_validusage target (internal issue 826). * Update style guide to prohibit writing non-self-contained (on a single bullet point) Valid Usage statements, and modify offending Valid Usage statements in the Specification to match, to assist with automatic extraction for the validation layers (internal issue 828). * Add ename:VK_VALIDATION_CHECK_SHADERS_EXT to elink:VkValidationCheckEXT of the `VK_EXT_validation_flags` extension, to selectively disable shader validation. * Remove duplicate valid usage statement for slink:VkImageMemoryBarrier. * Modify reflow.py script to place VUID tag anchors standalone on a line following their corresponding bullet point, and reflow the spec text accordingly (this had been pending since the initial tag deployment). New Extensions: * `VK_AMD_texture_gather_bias_lod`
2017-05-21 00:00:50 +00:00
* [[VUID-VkClearValue-depthStencil-00023]]
pname:depthStencil must: be a valid sname:VkClearDepthStencilValue
Change log for October 25, 2016 Vulkan 1.0.32 spec update: * Bump API patch number and header version number to 32 for this update. Github Issues: * Add automatic visibility operations to the presentation engineE when doing a queue present in flink:vkAcquireNextImageKHR. Removed all references to MEMORY_READ that referenced WSI - they no longer make sense (some aspects of public issues 128, 131, 132, 261, and 298). * Document valid non-boolean +externsync+ attribute values for <param> tags in +vk.xml+ (public issue 265). * Add valid usage to slink:VkImageCreateInfo requiring that pname:arrayLayers be 1 for images of type ename:VK_IMAGE_TYPE_3D (public issue 319). * Add missing captions to figures in the <<textures,Image Operations>> chapter (public issue 334). * Clarify WSI interaction with exclusive sharing mode (public issue 344). * Added explicit language clarifying the allowed queue usage of resources created with ename:VK_SHARING_MODE_CONCURRENT (public issue 386). * Require that the slink:VkDescriptorSetLayoutCreateInfo::pname:binding members of the pname:pBindings array passed to flink:vkDescriptorSetLayoutCreateInfo all be distinct (public issue 391). Internal Issues: * Remove empty validity blocks from +vk.xml+ and suppressed broken validity statements and added missing statements to explicit validity. Doesn't affect output, other than some statements appearing in another block now (internal issue 513).
2016-10-25 05:22:26 +00:00
structure
****
Vulkan 1.0 branch 1.0 for release
2016-02-16 09:53:44 +00:00
include::../validity/structs/VkClearValue.txt[]
[[clears-filling-buffers]]
== Filling Buffers
Change log for September 16, 2016 Vulkan 1.0.27 spec update: * Bump API patch number and header version number to 27 for this update. Github Issues: * Weaken flink:vkGetPipelineCacheData invariance conditions; previous conditions were stronger than agreed and can't be guaranteed (public issue 280). * Add link to "Vulkan Loader Specification and Architecture Overview" document to Normative References section (public issue 359). Internal Issues: * Be more clear in the <<interfaces-resources-layout-std140, uniform buffer layout>> section that block offsets can be out of order (internal issue 396). * Document that extension authors should add support for their extensions to the validation layers (internal issue 398). * Clarify that the valid range of depth clear values should be limited to the 0..1 range and that copies to depth aspect must also be in this range (internal issue 412). * Specify ``a'' vs. ``an'' use in the style guide (internal issue 432). * Increase the maximum pname:nonCoherentAtomSize value in the <<features-limits-required,Required Limits>> section from 128 to 256 (internal issue 435). * Fix vk_platform.h for compiler errors on some Android platforms (internal issue 441). * Clarify that slink:VkPhysicalDeviceFeatures::pname:pEnabledFeatures == `NULL` disables all features, including the "required" feature pname:robustBufferAccess (internal issue 479). Other Issues: * Expand style guide and make it more self-consistent. * Use ISO 8601 date format everywhere. * Emphasise the correct way of using slink:VkSurfaceCapabilitiesKHR::pname:maxImageCount. * Added +VK_EXT_validation_flags+ extension for validation flag mechanism. * Fix an <<credits,author credit>> to include their current employer.
2016-09-17 04:22:17 +00:00
// refBegin vkCmdFillBuffer Fill a region of a buffer with a fixed value
Change log for July 10, 2016 Vulkan 1.0.20 spec update: * Bump API patch number and header version number to 20 for this update. Github Issues: * Replaced existing reference pages by text automatically extracted from the specification source, or generated from vk.xml in some cases. This isn't a complete solution for the reference pages, but puts them in a much better state. The ref pages (only) are now placed under a CC BY open source license, which is more current than the obsolete license previously used. Further improvements to the pages should not edit them directly, but instead concentrate on the specification source from which the ref pages are being extracted (public issues 44, 55, 160; internal issue 389).
2016-07-11 01:13:41 +00:00
Vulkan 1.0 branch 1.0 for release
2016-02-16 09:53:44 +00:00
To clear buffer data, call:
Change log for July 22, 2016 Vulkan 1.0.22 spec update: * Bump API patch number and header version number to 22 for this update. Github Issues: * Translate the subpass self-dependency language into concrete validity statements, and added a validity statement about the restrictions on layout parameters (public issue 267). * Add validity requirement that slink:VkAttachmentDescription::pname:finalLayout and slink:VkAttachmentReference::pname:layout must not be ename:VK_IMAGE_LAYOUT_UNDEFINED or ename:VK_IMAGE_LAYOUT_PREINITIALIZED (public issue 268). * Clarify that slink:VkSubpassDescription::pname:pResolveAttachments layouts are used. Make language consistent with other attachment arrays (public issue 270). * Changed 64-bit definition for dname:VK_DEFINE_NON_DISPATCHABLE_HANDLE to work for x32 platform in +vk.xml+ and the resulting +vulkan.h+ (public issue 282). * Add missing error return code for flink:vkEnumerateInstanceExtensionProperties and flink:vkEnumerateDeviceExtensionProperties (public issue 285) * Fix several cases of stext::VkStructName.memberName markup to stext::VkStructName::pname:memberName, to match other usage in the spec, and describe this markup in the style guide (public issue 286). * Modified validity language generation script to avoid redundant common ancestor language if covered by generic parent language, and used `Both' instead of `Each' when appropriate (public issue 288). Internal Issues: * Add language about behavior of flink:vkAllocateDescriptorSets when allocation fails due to fragmentation, a new error ename:VK_ERROR_FRAGMENTED_POOL, and a Note explaining the situation (internal issue 309). * For the features of code:PointSize, code:ClipDistance, and code:CullDistance, the SPIR-V capability is required to be declared on use (read or write) rather than on decoration (internal issue 359). * Have desktop versions of GLSL respect precision qualification (code:mediump and code:lowp) when compiling for Vulkan. These will get translated to SPIR-V's code:RelaxedPrecision decoration as they do with OpenGL ES versions of GLSL (ESSL). The default precision of all types is code:highp when using a desktop version (internal issue 360). * Add validity statement for slink:VkImageCreateInfo specifying that multisampled images must be two-dimensional, optimally tiled, and with a single mipmap level (internal issue 369). * Add validity statements to slink:VkImageViewCreateInfo disallowing creation of images or image views with no supported features. Made some slink:VkImageViewCreateInfo validity statements more precise and consistent. Added a Note to the <<features,features>> chapter about formats with no features (internal issue 371). * Remove +manpages+ from default build targets. Nroff outputs containing imbedded latexmath will not render properly. Fixing this is a lot of work for limited use cases (internal issue 401). Other Commits: * Fix flink:vkRenderPassBeginInfo::pname:clearValueCount validity statement to be based on attachment indices rather than the number of cleared attachments (Vulkan-LoaderAndValidationLayers/issues/601). * Convert registry documentation from LaTeX to asciidoc source and rename from +src/spec/readme.tex+ to +src/spec/registry.txt+. * Fix lack of Oxford commas in validity language. * Lots of cleanup of generator scripts and Makefiles to move extension list for generator into the script arguments instead of the body of genvk.py, and express better dependencies between XML, scripts, and generated files.
2016-07-23 10:15:48 +00:00
include::../api/protos/vkCmdFillBuffer.txt[]
Vulkan 1.0 branch 1.0 for release
2016-02-16 09:53:44 +00:00
* pname:commandBuffer is the command buffer into which the command will be
recorded.
* pname:dstBuffer is the buffer to be filled.
* pname:dstOffset is the byte offset into the buffer at which to start
filling, and must: be a multiple of 4.
* pname:size is the number of bytes to fill, and must: be either a
multiple of 4, or ename:VK_WHOLE_SIZE to fill the range from
Change log for September 23, 2016 Vulkan 1.0.28 spec update: * Bump API patch number and header version number to 28 for this update. Github Issues: * Minor spelling and typography cleanup, add definitions of ename:VK_FALSE and ename:VK_TRUE as just what their names say (public issues 220, 318, 325, 365; internal issues 451, 496) * Clarify that the pname:maxDescriptorSet limits in the <<features-limits-required,Required Limits>> table are n * maxPerStage limit (where n=number of supported stages) (public issue 254). * Minor cleanup to <<boilerplate-platform-macros,Platform-Specific Macro Definitions>> appendix (public issue 314). * Add valid usage statement to slink:VkPipelineLayoutCreateInfo disallowing multiple push constant ranges for the same shader stage (public issue 340). * Clarify the elink:VkSharingMode description of what executing the "same" barriers means in case of ownership transfer (public issue 347). * Rename copyright.txt and add COPYING.md to try and reduce confusion about applicable copyrights (public issue 350). * Extend the table in the <<boilerplate-wsi-header, Window System-Specific Header Control>> section to describe the external headers included when each etext:VK_USE_PLATFORM_* macro is defined (public issue 376). Internal Issues: * Add "Revision History" to the PDF outputs following the table of contents, to match HTML outputs (internal issue 43). * Clarified that flink:vkMapMemory may fail due to virtual address space limitations (internal issue 346). * Add +refBody+ comment markup for ref page autoextraction when required (internal issue 400). * Document proper use of "mipmap" and "mip" in the style guide API naming rules, matching the spelling rules (internal issue 471). * Tweak the <<extensions,Layers and Extensions>> appendix to note that the Specification may be built with arbitrary combinations of extensions (internal issue 483). * Remove incorrect statement allowing slink:VkClearAttachment::pname:colorAttachment to be >= slink:VkSubpassDescription::pname:colorAttachmentCount (internal issue 488). * The <<features-limits-viewportboundsrange,viewportBoundsRange>> is expressed in terms of the pname:maxViewportDimensions but this is actually two values. Clarify that it's based on the larger of the two (if they differ) (internal issue 499). Other Issues: * Reflowed text of the entire spec using the 'reflow' Makefile gater, to (hopefully) reduce future internal git churn as edits are made and extensions added in return for one-time pain. This has no perceptible change on the spec outputs but considerable changes on the asciidoc source (internal issue 367).
2016-09-24 07:58:11 +00:00
pname:offset to the end of the buffer.
If ename:VK_WHOLE_SIZE is used and the remaining size of the buffer is
not a multiple of 4, then the nearest smaller multiple is used.
Vulkan 1.0 branch 1.0 for release
2016-02-16 09:53:44 +00:00
* pname:data is the 4-byte word written repeatedly to the buffer to fill
Change log for September 23, 2016 Vulkan 1.0.28 spec update: * Bump API patch number and header version number to 28 for this update. Github Issues: * Minor spelling and typography cleanup, add definitions of ename:VK_FALSE and ename:VK_TRUE as just what their names say (public issues 220, 318, 325, 365; internal issues 451, 496) * Clarify that the pname:maxDescriptorSet limits in the <<features-limits-required,Required Limits>> table are n * maxPerStage limit (where n=number of supported stages) (public issue 254). * Minor cleanup to <<boilerplate-platform-macros,Platform-Specific Macro Definitions>> appendix (public issue 314). * Add valid usage statement to slink:VkPipelineLayoutCreateInfo disallowing multiple push constant ranges for the same shader stage (public issue 340). * Clarify the elink:VkSharingMode description of what executing the "same" barriers means in case of ownership transfer (public issue 347). * Rename copyright.txt and add COPYING.md to try and reduce confusion about applicable copyrights (public issue 350). * Extend the table in the <<boilerplate-wsi-header, Window System-Specific Header Control>> section to describe the external headers included when each etext:VK_USE_PLATFORM_* macro is defined (public issue 376). Internal Issues: * Add "Revision History" to the PDF outputs following the table of contents, to match HTML outputs (internal issue 43). * Clarified that flink:vkMapMemory may fail due to virtual address space limitations (internal issue 346). * Add +refBody+ comment markup for ref page autoextraction when required (internal issue 400). * Document proper use of "mipmap" and "mip" in the style guide API naming rules, matching the spelling rules (internal issue 471). * Tweak the <<extensions,Layers and Extensions>> appendix to note that the Specification may be built with arbitrary combinations of extensions (internal issue 483). * Remove incorrect statement allowing slink:VkClearAttachment::pname:colorAttachment to be >= slink:VkSubpassDescription::pname:colorAttachmentCount (internal issue 488). * The <<features-limits-viewportboundsrange,viewportBoundsRange>> is expressed in terms of the pname:maxViewportDimensions but this is actually two values. Clarify that it's based on the larger of the two (if they differ) (internal issue 499). Other Issues: * Reflowed text of the entire spec using the 'reflow' Makefile gater, to (hopefully) reduce future internal git churn as edits are made and extensions added in return for one-time pain. This has no perceptible change on the spec outputs but considerable changes on the asciidoc source (internal issue 367).
2016-09-24 07:58:11 +00:00
pname:size bytes of data.
The data word is written to memory according to the host endianness.
Vulkan 1.0 branch 1.0 for release
2016-02-16 09:53:44 +00:00
Change log for February 10, 2017 Vulkan 1.0.40 spec update: * Bump API patch number and header version number to 40 for this update. * There is a major build change in this release. We are now using the Ruby-based ``asciidoctor'' implementation, rather than the Python-based ``asciidoc'' implementation, to process the specification. While the actual specification markup changes were minimal, this requires a new set of build tools and a very different installation process, especially because we now use an experimental direct-to-PDF backend for Asciidoctor instead of Docbook->dblatex->PDF. It is no longer possible to build the Specification using asciidoc. See doc/specs/vulkan/README.adoc for some guidance on installing the new toolchain components. * There are some minor rendering issues in the PDF output due to teething problems with the asciidoctor toolchain, especially with mathematical equations. We are aware of these and working on them. Github Issues: * Updated sample code for the <<sparsememory-examples-basic,sparse resource binding example>> (public issue 97). * Modify line and point clipping behavior in the <<vertexpostproc-clipping, Primitive Clipping>> section to allow for pop-free behavior. The ability to check for which behavior is implemented may be added a future feature or extension (public issue 113). * Unify the discussions of implicit ordering throughout the spec, in particular in the new sections <<drawing-primitive-order, Primitive Order>>, <<primrast-order, Rasterization Order>>, and <<synchronization-implicit, Implicit Synchronization Guarantees>>; the discussion of <<synchronization-submission-order, submission order>>; and references elsewhere to these sections (public issue 133). * Clarify \<\<descriptorsets-compatibility,Pipeline Layout Compatibility>> language and introduce the term ``identically defined'' (public issue 164). * Add a dependency to the +VK_EXT_debug_marker+ extension that's needed to reuse the object type enum from +VK_EXT_debug_report+, and moves the definition of that enum into +VK_EXT_debug_report+ where it should be (public issue 409). * Remove redundant valid usage statement from slink:VkImageBlit (public issue 421). * Update GL_KHR_vulkan_glsl to allow the ternary operator to result in a specialization constant (public issue 424). * Fix valid usage for flink:VkPipelineShaderStageCreateInfo (public issue 426). * Correct typo in New Objects list for <<VK_EXT_debug_report>> (public issue 447). Internal Issues: * Moved to asciidoctor for spec builds (internal issue 121). * Update style guide to describe where to put new extensions-specific asciidoc files, and what to name them (internal issue 626). * Add src/spec/indexExt.py to autogenerate registry index entries linking into the 1.0-extensions specification, instead of maintaining the index manually. (internal issue 642). * Autogenerate extension dependencies and lists of all extensions and all KHR extensions from the "supported" attributes in +vk.xml+. Execute +make config/extDependency.sh+ from +doc/specs/vulkan+ when a supported extension is added to vk.xml, to regenerate the dependency script. The consequence is that specifying a single extension to the +makeExt+ script will automatically enable all extensions it depends on as well, and that the +makeAllExts+ and +makeKHR+ scripts do not need to be updated when a new extension is supported (internal issue 648). * Put extension appendices all at the same asciidoc section level, so KHR WSI extensions show up in the HTML index (internal issue 648). Other Issues: * Imbed images in the generated HTML specs instead of loading them from the images/ directory. * Fix missing EXT in extension name (ename:VK_EXT_SWAPCHAIN_COLOR_SPACE_EXTENSION_NAME). * Add new +VK_EXT_SMPTE_2086_metadata+ extension. * In the <<platformCreateSurface_xlib,Xlib Surface>> section of the +VK_KHR_xlib_surface+ specification, add language warning users that they always need to call code:XinitThreads. * Use the term "presentable image" (rather than "swapchain image") consistently in +VK_KHR_swapchain+ and related extensions, and add a glossary term defining it. * Relocate the valid usage for samples of flink:vkGetPhysicalDeviceSparseImageFormatProperties2KHR::pname:pFormatInfo to be below the flink:VkPhysicalDeviceSparseImageFormatInfo2KHR structure.
2017-02-11 04:37:39 +00:00
fname:vkCmdFillBuffer is treated as "`transfer`" operation for the purposes
Change log for September 23, 2016 Vulkan 1.0.28 spec update: * Bump API patch number and header version number to 28 for this update. Github Issues: * Minor spelling and typography cleanup, add definitions of ename:VK_FALSE and ename:VK_TRUE as just what their names say (public issues 220, 318, 325, 365; internal issues 451, 496) * Clarify that the pname:maxDescriptorSet limits in the <<features-limits-required,Required Limits>> table are n * maxPerStage limit (where n=number of supported stages) (public issue 254). * Minor cleanup to <<boilerplate-platform-macros,Platform-Specific Macro Definitions>> appendix (public issue 314). * Add valid usage statement to slink:VkPipelineLayoutCreateInfo disallowing multiple push constant ranges for the same shader stage (public issue 340). * Clarify the elink:VkSharingMode description of what executing the "same" barriers means in case of ownership transfer (public issue 347). * Rename copyright.txt and add COPYING.md to try and reduce confusion about applicable copyrights (public issue 350). * Extend the table in the <<boilerplate-wsi-header, Window System-Specific Header Control>> section to describe the external headers included when each etext:VK_USE_PLATFORM_* macro is defined (public issue 376). Internal Issues: * Add "Revision History" to the PDF outputs following the table of contents, to match HTML outputs (internal issue 43). * Clarified that flink:vkMapMemory may fail due to virtual address space limitations (internal issue 346). * Add +refBody+ comment markup for ref page autoextraction when required (internal issue 400). * Document proper use of "mipmap" and "mip" in the style guide API naming rules, matching the spelling rules (internal issue 471). * Tweak the <<extensions,Layers and Extensions>> appendix to note that the Specification may be built with arbitrary combinations of extensions (internal issue 483). * Remove incorrect statement allowing slink:VkClearAttachment::pname:colorAttachment to be >= slink:VkSubpassDescription::pname:colorAttachmentCount (internal issue 488). * The <<features-limits-viewportboundsrange,viewportBoundsRange>> is expressed in terms of the pname:maxViewportDimensions but this is actually two values. Clarify that it's based on the larger of the two (if they differ) (internal issue 499). Other Issues: * Reflowed text of the entire spec using the 'reflow' Makefile gater, to (hopefully) reduce future internal git churn as edits are made and extensions added in return for one-time pain. This has no perceptible change on the spec outputs but considerable changes on the asciidoc source (internal issue 367).
2016-09-24 07:58:11 +00:00
of synchronization barriers.
The ename:VK_BUFFER_USAGE_TRANSFER_DST_BIT must: be specified in pname:usage
of sname:VkBufferCreateInfo in order for the buffer to be compatible with
fname:vkCmdFillBuffer.
Vulkan 1.0 branch 1.0 for release
2016-02-16 09:53:44 +00:00
Change log for September 30, 2016 Vulkan 1.0.29 spec update: * Bump API patch number and header version number to 29 for this update. Github Issues: * Remove redundant constraint on slink:VkCommandBufferInheritanceInfo::pname:queryFlags (public issue 224). * Fix typo and remove link in Note in the <<extended-functionality-instance-extensions-and-devices, Instance Extensions and Device Extensions>> section (public issue 359). * Fix erroneous validation statement for the pname:layout member of slink:VkComputePipelineCreateInfo (public issue 362). Internal Issues: * Restore long figure captions using asciidoc sidebar blocks, due to restrictions of asciidoc syntax (internal issue 101). * Replace most latexmath equations with comparable markup in straight asciidoc, which significantly improves time required to fully load and process the HTML forms of the Specification. There are known minor font and alignment inconsistencies with MathJax and PDF rendering of latexmath equations. Please do not file github issues about these. We are aware of the inconsistencies and will make refinements over time, while the performance improvements are compelling in at least some major browsers (internal issue 313). * Move handcoded validity statements from +vk.xml+ into the Specification body, easing work in the single-branch model. Specify the distinction between these explicit statements, and the implicit validity statements inferred from vk.xml. Validity statements now appear in two blocks for each command and structure - handcoded "Valid Usage" and the implicit "Valid Usage (Implicit)" (internal issue 392). * Add the +returnedonly="false"+ attribute to WSI output structures, removing incorrectly generated implicit validity statements for slink:VkDisplayPropertiesKHR, slink:VkDisplayPlanePropertiesKHR, slink:VkDisplayModePropertiesKHR, slink:VkDisplayPlaneCapabilitiesKHR, slink:VkSurfaceCapabilitiesKHR, and slink:VkSurfaceFormatKHR structures (internal issue 486). * Update slink:VkImageLayout to require the ename:VK_IMAGE_USAGE_SAMPLED_BIT be set for sampled depth/stencil images (internal issue 487). * Use an explicit format specifier string for the date command invocation in the +Makefile+ instead of the shorthand -R option, which doesn't work on BSD and MaxOS X date commands (internal issue 500). Other Issues: * Use the terms ``allocation scope'' and ``extension scope'' instead of just ``scope'', and add them to the glossary.
2016-10-01 04:13:37 +00:00
.Valid Usage
****
Change log for May 20, 2017 Vulkan 1.0.50 spec update: * Bump API patch number and header version number to 50 for this update. Github Issues: * Fix numerous minor issues with the VK_EXT_debug_report extension (public issues 478, 483, 486, 489, 490). Internal Issues: * Update flink:vkAllocateDescriptorSets to specify conditions under which to return ename:VK_ERROR_FRAGMENTED_POOL or ename:VK_ERROR_OUT_OF_POOL_MEMORY instead of out-of-host/out-of-device-memory, and improve the <<fundamentals-errorcodes, description of those errors (internal issue 654). * Add a NOTE documenting that flink:vkAcquireNextImageKHR can only signal a single semaphore, and how to deal with that when multiple physical devices in a logical device need to wait on it (internal issue 730). * Improve description of pname:pNext chains of slink:VkPhysicalDeviceImageFormatInfo2KHR and slink:VkImageFormatProperties2KHR (internal issue 814). * Clean up math markup issues in the <<textures, Image Operations>> chapter (internal issue 818). * Update validusage target to use more robust code for preprocessing, by making direct use of Asciidoctor's preprocessor. Added uniqueItems check to JSON vu schema and add clean_validusage target (internal issue 826). * Update style guide to prohibit writing non-self-contained (on a single bullet point) Valid Usage statements, and modify offending Valid Usage statements in the Specification to match, to assist with automatic extraction for the validation layers (internal issue 828). * Add ename:VK_VALIDATION_CHECK_SHADERS_EXT to elink:VkValidationCheckEXT of the `VK_EXT_validation_flags` extension, to selectively disable shader validation. * Remove duplicate valid usage statement for slink:VkImageMemoryBarrier. * Modify reflow.py script to place VUID tag anchors standalone on a line following their corresponding bullet point, and reflow the spec text accordingly (this had been pending since the initial tag deployment). New Extensions: * `VK_AMD_texture_gather_bias_lod`
2017-05-21 00:00:50 +00:00
* [[VUID-vkCmdFillBuffer-dstOffset-00024]]
pname:dstOffset must: be less than the size of pname:dstBuffer
* [[VUID-vkCmdFillBuffer-dstOffset-00025]]
pname:dstOffset must: be a multiple of `4`
* [[VUID-vkCmdFillBuffer-size-00026]]
If pname:size is not equal to ename:VK_WHOLE_SIZE, pname:size must: be
Change log for September 30, 2016 Vulkan 1.0.29 spec update: * Bump API patch number and header version number to 29 for this update. Github Issues: * Remove redundant constraint on slink:VkCommandBufferInheritanceInfo::pname:queryFlags (public issue 224). * Fix typo and remove link in Note in the <<extended-functionality-instance-extensions-and-devices, Instance Extensions and Device Extensions>> section (public issue 359). * Fix erroneous validation statement for the pname:layout member of slink:VkComputePipelineCreateInfo (public issue 362). Internal Issues: * Restore long figure captions using asciidoc sidebar blocks, due to restrictions of asciidoc syntax (internal issue 101). * Replace most latexmath equations with comparable markup in straight asciidoc, which significantly improves time required to fully load and process the HTML forms of the Specification. There are known minor font and alignment inconsistencies with MathJax and PDF rendering of latexmath equations. Please do not file github issues about these. We are aware of the inconsistencies and will make refinements over time, while the performance improvements are compelling in at least some major browsers (internal issue 313). * Move handcoded validity statements from +vk.xml+ into the Specification body, easing work in the single-branch model. Specify the distinction between these explicit statements, and the implicit validity statements inferred from vk.xml. Validity statements now appear in two blocks for each command and structure - handcoded "Valid Usage" and the implicit "Valid Usage (Implicit)" (internal issue 392). * Add the +returnedonly="false"+ attribute to WSI output structures, removing incorrectly generated implicit validity statements for slink:VkDisplayPropertiesKHR, slink:VkDisplayPlanePropertiesKHR, slink:VkDisplayModePropertiesKHR, slink:VkDisplayPlaneCapabilitiesKHR, slink:VkSurfaceCapabilitiesKHR, and slink:VkSurfaceFormatKHR structures (internal issue 486). * Update slink:VkImageLayout to require the ename:VK_IMAGE_USAGE_SAMPLED_BIT be set for sampled depth/stencil images (internal issue 487). * Use an explicit format specifier string for the date command invocation in the +Makefile+ instead of the shorthand -R option, which doesn't work on BSD and MaxOS X date commands (internal issue 500). Other Issues: * Use the terms ``allocation scope'' and ``extension scope'' instead of just ``scope'', and add them to the glossary.
2016-10-01 04:13:37 +00:00
greater than `0`
Change log for May 20, 2017 Vulkan 1.0.50 spec update: * Bump API patch number and header version number to 50 for this update. Github Issues: * Fix numerous minor issues with the VK_EXT_debug_report extension (public issues 478, 483, 486, 489, 490). Internal Issues: * Update flink:vkAllocateDescriptorSets to specify conditions under which to return ename:VK_ERROR_FRAGMENTED_POOL or ename:VK_ERROR_OUT_OF_POOL_MEMORY instead of out-of-host/out-of-device-memory, and improve the <<fundamentals-errorcodes, description of those errors (internal issue 654). * Add a NOTE documenting that flink:vkAcquireNextImageKHR can only signal a single semaphore, and how to deal with that when multiple physical devices in a logical device need to wait on it (internal issue 730). * Improve description of pname:pNext chains of slink:VkPhysicalDeviceImageFormatInfo2KHR and slink:VkImageFormatProperties2KHR (internal issue 814). * Clean up math markup issues in the <<textures, Image Operations>> chapter (internal issue 818). * Update validusage target to use more robust code for preprocessing, by making direct use of Asciidoctor's preprocessor. Added uniqueItems check to JSON vu schema and add clean_validusage target (internal issue 826). * Update style guide to prohibit writing non-self-contained (on a single bullet point) Valid Usage statements, and modify offending Valid Usage statements in the Specification to match, to assist with automatic extraction for the validation layers (internal issue 828). * Add ename:VK_VALIDATION_CHECK_SHADERS_EXT to elink:VkValidationCheckEXT of the `VK_EXT_validation_flags` extension, to selectively disable shader validation. * Remove duplicate valid usage statement for slink:VkImageMemoryBarrier. * Modify reflow.py script to place VUID tag anchors standalone on a line following their corresponding bullet point, and reflow the spec text accordingly (this had been pending since the initial tag deployment). New Extensions: * `VK_AMD_texture_gather_bias_lod`
2017-05-21 00:00:50 +00:00
* [[VUID-vkCmdFillBuffer-size-00027]]
If pname:size is not equal to ename:VK_WHOLE_SIZE, pname:size must: be
Change log for September 30, 2016 Vulkan 1.0.29 spec update: * Bump API patch number and header version number to 29 for this update. Github Issues: * Remove redundant constraint on slink:VkCommandBufferInheritanceInfo::pname:queryFlags (public issue 224). * Fix typo and remove link in Note in the <<extended-functionality-instance-extensions-and-devices, Instance Extensions and Device Extensions>> section (public issue 359). * Fix erroneous validation statement for the pname:layout member of slink:VkComputePipelineCreateInfo (public issue 362). Internal Issues: * Restore long figure captions using asciidoc sidebar blocks, due to restrictions of asciidoc syntax (internal issue 101). * Replace most latexmath equations with comparable markup in straight asciidoc, which significantly improves time required to fully load and process the HTML forms of the Specification. There are known minor font and alignment inconsistencies with MathJax and PDF rendering of latexmath equations. Please do not file github issues about these. We are aware of the inconsistencies and will make refinements over time, while the performance improvements are compelling in at least some major browsers (internal issue 313). * Move handcoded validity statements from +vk.xml+ into the Specification body, easing work in the single-branch model. Specify the distinction between these explicit statements, and the implicit validity statements inferred from vk.xml. Validity statements now appear in two blocks for each command and structure - handcoded "Valid Usage" and the implicit "Valid Usage (Implicit)" (internal issue 392). * Add the +returnedonly="false"+ attribute to WSI output structures, removing incorrectly generated implicit validity statements for slink:VkDisplayPropertiesKHR, slink:VkDisplayPlanePropertiesKHR, slink:VkDisplayModePropertiesKHR, slink:VkDisplayPlaneCapabilitiesKHR, slink:VkSurfaceCapabilitiesKHR, and slink:VkSurfaceFormatKHR structures (internal issue 486). * Update slink:VkImageLayout to require the ename:VK_IMAGE_USAGE_SAMPLED_BIT be set for sampled depth/stencil images (internal issue 487). * Use an explicit format specifier string for the date command invocation in the +Makefile+ instead of the shorthand -R option, which doesn't work on BSD and MaxOS X date commands (internal issue 500). Other Issues: * Use the terms ``allocation scope'' and ``extension scope'' instead of just ``scope'', and add them to the glossary.
2016-10-01 04:13:37 +00:00
less than or equal to the size of pname:dstBuffer minus pname:dstOffset
Change log for May 20, 2017 Vulkan 1.0.50 spec update: * Bump API patch number and header version number to 50 for this update. Github Issues: * Fix numerous minor issues with the VK_EXT_debug_report extension (public issues 478, 483, 486, 489, 490). Internal Issues: * Update flink:vkAllocateDescriptorSets to specify conditions under which to return ename:VK_ERROR_FRAGMENTED_POOL or ename:VK_ERROR_OUT_OF_POOL_MEMORY instead of out-of-host/out-of-device-memory, and improve the <<fundamentals-errorcodes, description of those errors (internal issue 654). * Add a NOTE documenting that flink:vkAcquireNextImageKHR can only signal a single semaphore, and how to deal with that when multiple physical devices in a logical device need to wait on it (internal issue 730). * Improve description of pname:pNext chains of slink:VkPhysicalDeviceImageFormatInfo2KHR and slink:VkImageFormatProperties2KHR (internal issue 814). * Clean up math markup issues in the <<textures, Image Operations>> chapter (internal issue 818). * Update validusage target to use more robust code for preprocessing, by making direct use of Asciidoctor's preprocessor. Added uniqueItems check to JSON vu schema and add clean_validusage target (internal issue 826). * Update style guide to prohibit writing non-self-contained (on a single bullet point) Valid Usage statements, and modify offending Valid Usage statements in the Specification to match, to assist with automatic extraction for the validation layers (internal issue 828). * Add ename:VK_VALIDATION_CHECK_SHADERS_EXT to elink:VkValidationCheckEXT of the `VK_EXT_validation_flags` extension, to selectively disable shader validation. * Remove duplicate valid usage statement for slink:VkImageMemoryBarrier. * Modify reflow.py script to place VUID tag anchors standalone on a line following their corresponding bullet point, and reflow the spec text accordingly (this had been pending since the initial tag deployment). New Extensions: * `VK_AMD_texture_gather_bias_lod`
2017-05-21 00:00:50 +00:00
* [[VUID-vkCmdFillBuffer-size-00028]]
If pname:size is not equal to ename:VK_WHOLE_SIZE, pname:size must: be a
Change log for September 30, 2016 Vulkan 1.0.29 spec update: * Bump API patch number and header version number to 29 for this update. Github Issues: * Remove redundant constraint on slink:VkCommandBufferInheritanceInfo::pname:queryFlags (public issue 224). * Fix typo and remove link in Note in the <<extended-functionality-instance-extensions-and-devices, Instance Extensions and Device Extensions>> section (public issue 359). * Fix erroneous validation statement for the pname:layout member of slink:VkComputePipelineCreateInfo (public issue 362). Internal Issues: * Restore long figure captions using asciidoc sidebar blocks, due to restrictions of asciidoc syntax (internal issue 101). * Replace most latexmath equations with comparable markup in straight asciidoc, which significantly improves time required to fully load and process the HTML forms of the Specification. There are known minor font and alignment inconsistencies with MathJax and PDF rendering of latexmath equations. Please do not file github issues about these. We are aware of the inconsistencies and will make refinements over time, while the performance improvements are compelling in at least some major browsers (internal issue 313). * Move handcoded validity statements from +vk.xml+ into the Specification body, easing work in the single-branch model. Specify the distinction between these explicit statements, and the implicit validity statements inferred from vk.xml. Validity statements now appear in two blocks for each command and structure - handcoded "Valid Usage" and the implicit "Valid Usage (Implicit)" (internal issue 392). * Add the +returnedonly="false"+ attribute to WSI output structures, removing incorrectly generated implicit validity statements for slink:VkDisplayPropertiesKHR, slink:VkDisplayPlanePropertiesKHR, slink:VkDisplayModePropertiesKHR, slink:VkDisplayPlaneCapabilitiesKHR, slink:VkSurfaceCapabilitiesKHR, and slink:VkSurfaceFormatKHR structures (internal issue 486). * Update slink:VkImageLayout to require the ename:VK_IMAGE_USAGE_SAMPLED_BIT be set for sampled depth/stencil images (internal issue 487). * Use an explicit format specifier string for the date command invocation in the +Makefile+ instead of the shorthand -R option, which doesn't work on BSD and MaxOS X date commands (internal issue 500). Other Issues: * Use the terms ``allocation scope'' and ``extension scope'' instead of just ``scope'', and add them to the glossary.
2016-10-01 04:13:37 +00:00
multiple of `4`
Change log for May 20, 2017 Vulkan 1.0.50 spec update: * Bump API patch number and header version number to 50 for this update. Github Issues: * Fix numerous minor issues with the VK_EXT_debug_report extension (public issues 478, 483, 486, 489, 490). Internal Issues: * Update flink:vkAllocateDescriptorSets to specify conditions under which to return ename:VK_ERROR_FRAGMENTED_POOL or ename:VK_ERROR_OUT_OF_POOL_MEMORY instead of out-of-host/out-of-device-memory, and improve the <<fundamentals-errorcodes, description of those errors (internal issue 654). * Add a NOTE documenting that flink:vkAcquireNextImageKHR can only signal a single semaphore, and how to deal with that when multiple physical devices in a logical device need to wait on it (internal issue 730). * Improve description of pname:pNext chains of slink:VkPhysicalDeviceImageFormatInfo2KHR and slink:VkImageFormatProperties2KHR (internal issue 814). * Clean up math markup issues in the <<textures, Image Operations>> chapter (internal issue 818). * Update validusage target to use more robust code for preprocessing, by making direct use of Asciidoctor's preprocessor. Added uniqueItems check to JSON vu schema and add clean_validusage target (internal issue 826). * Update style guide to prohibit writing non-self-contained (on a single bullet point) Valid Usage statements, and modify offending Valid Usage statements in the Specification to match, to assist with automatic extraction for the validation layers (internal issue 828). * Add ename:VK_VALIDATION_CHECK_SHADERS_EXT to elink:VkValidationCheckEXT of the `VK_EXT_validation_flags` extension, to selectively disable shader validation. * Remove duplicate valid usage statement for slink:VkImageMemoryBarrier. * Modify reflow.py script to place VUID tag anchors standalone on a line following their corresponding bullet point, and reflow the spec text accordingly (this had been pending since the initial tag deployment). New Extensions: * `VK_AMD_texture_gather_bias_lod`
2017-05-21 00:00:50 +00:00
* [[VUID-vkCmdFillBuffer-dstBuffer-00029]]
pname:dstBuffer must: have been created with
Change log for September 30, 2016 Vulkan 1.0.29 spec update: * Bump API patch number and header version number to 29 for this update. Github Issues: * Remove redundant constraint on slink:VkCommandBufferInheritanceInfo::pname:queryFlags (public issue 224). * Fix typo and remove link in Note in the <<extended-functionality-instance-extensions-and-devices, Instance Extensions and Device Extensions>> section (public issue 359). * Fix erroneous validation statement for the pname:layout member of slink:VkComputePipelineCreateInfo (public issue 362). Internal Issues: * Restore long figure captions using asciidoc sidebar blocks, due to restrictions of asciidoc syntax (internal issue 101). * Replace most latexmath equations with comparable markup in straight asciidoc, which significantly improves time required to fully load and process the HTML forms of the Specification. There are known minor font and alignment inconsistencies with MathJax and PDF rendering of latexmath equations. Please do not file github issues about these. We are aware of the inconsistencies and will make refinements over time, while the performance improvements are compelling in at least some major browsers (internal issue 313). * Move handcoded validity statements from +vk.xml+ into the Specification body, easing work in the single-branch model. Specify the distinction between these explicit statements, and the implicit validity statements inferred from vk.xml. Validity statements now appear in two blocks for each command and structure - handcoded "Valid Usage" and the implicit "Valid Usage (Implicit)" (internal issue 392). * Add the +returnedonly="false"+ attribute to WSI output structures, removing incorrectly generated implicit validity statements for slink:VkDisplayPropertiesKHR, slink:VkDisplayPlanePropertiesKHR, slink:VkDisplayModePropertiesKHR, slink:VkDisplayPlaneCapabilitiesKHR, slink:VkSurfaceCapabilitiesKHR, and slink:VkSurfaceFormatKHR structures (internal issue 486). * Update slink:VkImageLayout to require the ename:VK_IMAGE_USAGE_SAMPLED_BIT be set for sampled depth/stencil images (internal issue 487). * Use an explicit format specifier string for the date command invocation in the +Makefile+ instead of the shorthand -R option, which doesn't work on BSD and MaxOS X date commands (internal issue 500). Other Issues: * Use the terms ``allocation scope'' and ``extension scope'' instead of just ``scope'', and add them to the glossary.
2016-10-01 04:13:37 +00:00
ename:VK_BUFFER_USAGE_TRANSFER_DST_BIT usage flag
Change log for January 23, 2017 Vulkan 1.0.39 spec update: * Bump API patch number and header version number to 39 for this update. Github Issues: * Clarified that only accesses via the specified buffer/image subresource ranges are included in the access scopes (public issue 306). * Add missing valid usage statements for flink:vkCreateComputePipelines and flink:vkCreateGraphicsPipelines (public issue 427). Internal Issues: * Add a Note to the <<invariance,Invariance>> appendix about a difference between OpenGL and Vulkan with regards to how primitives derived from offsets are handled (internal issue 355). * Add the +<<VK_KHR_get_physical_device_properties2>>+, +<<VK_KHR_maintenance1>>+, and +<<VK_KHR_shader_draw_parameters>>+ extensions (internal issue 448). * Add the +<<VK_EXT_shader_subgroup_vote>>+ and +<<VK_EXT_shader_subgroup_ballot>>+ extensions (internal issue 449). * Update the texture level-of-detail equation in the <<textures-scale-factor,Scale Factor Operation>> section to better approximate the ellipse major and minor axes (internal issue 547). * Forbid non-explicitly allowed uses of interface decorations in the introduction to the <<interfaces,Shader Interfaces>> chapter (internal issue 607). * Replace use of MathJax with KaTeX, for improved load-time performance as well as avoiding the scrolling-and-scrolling behavior due to MathJax asynchronous rendering when loading at an anchor inside the spec. This change also requires moving to HTML5 output for the spec instead of XHTML, and there is a visible difference in that the chapter navigation index is now in a scrollable sidebar instead of at the top of the document. We may or may not retain the nav sidebar based on feedback (internal issue 613). * Improve consistency of markup and formatting in extension appendices (internal issue 631). Other Issues: * Add explicit valid usage statements to slink:VkImageCopy requiring that the source and destination layer ranges be contained in their respective source and destination images. * Add valid usage language for swapchain of flink:vkAcquireNextImage. If the swapchain has been replaced, then it should not be passed to flink:vkAcquireNextImage. * Add a valid usage statement to flink:vkCreateImageView, that the image must have been created with an appropriate usage bit set. * Noted that slink:VkDisplayPresentInfoKHR is a valid extension of slink:VkPresentInfoKHR in the <<wsi_swapchain,WSI Swapchain>> section. * Update valid usage for flink:vkCmdSetViewport and flink:vkCmdSetScissor to account for the multiple viewport feature. If the feature is not enabled, the parameters for these functions have required values that are defined in the <<features-features-multiViewport,multiple viewports>> section of the spec but were not reflected in the valid usage text for these functions. * Add the +<<VK_EXT_swapchain_colorspace>>+ extension defining common color spaces.
2017-01-18 04:11:25 +00:00
ifndef::VK_KHR_maintenance1[]
Change log for May 20, 2017 Vulkan 1.0.50 spec update: * Bump API patch number and header version number to 50 for this update. Github Issues: * Fix numerous minor issues with the VK_EXT_debug_report extension (public issues 478, 483, 486, 489, 490). Internal Issues: * Update flink:vkAllocateDescriptorSets to specify conditions under which to return ename:VK_ERROR_FRAGMENTED_POOL or ename:VK_ERROR_OUT_OF_POOL_MEMORY instead of out-of-host/out-of-device-memory, and improve the <<fundamentals-errorcodes, description of those errors (internal issue 654). * Add a NOTE documenting that flink:vkAcquireNextImageKHR can only signal a single semaphore, and how to deal with that when multiple physical devices in a logical device need to wait on it (internal issue 730). * Improve description of pname:pNext chains of slink:VkPhysicalDeviceImageFormatInfo2KHR and slink:VkImageFormatProperties2KHR (internal issue 814). * Clean up math markup issues in the <<textures, Image Operations>> chapter (internal issue 818). * Update validusage target to use more robust code for preprocessing, by making direct use of Asciidoctor's preprocessor. Added uniqueItems check to JSON vu schema and add clean_validusage target (internal issue 826). * Update style guide to prohibit writing non-self-contained (on a single bullet point) Valid Usage statements, and modify offending Valid Usage statements in the Specification to match, to assist with automatic extraction for the validation layers (internal issue 828). * Add ename:VK_VALIDATION_CHECK_SHADERS_EXT to elink:VkValidationCheckEXT of the `VK_EXT_validation_flags` extension, to selectively disable shader validation. * Remove duplicate valid usage statement for slink:VkImageMemoryBarrier. * Modify reflow.py script to place VUID tag anchors standalone on a line following their corresponding bullet point, and reflow the spec text accordingly (this had been pending since the initial tag deployment). New Extensions: * `VK_AMD_texture_gather_bias_lod`
2017-05-21 00:00:50 +00:00
* [[VUID-vkCmdFillBuffer-commandBuffer-00030]]
The sname:VkCommandPool that pname:commandBuffer was allocated from
Change log for January 23, 2017 Vulkan 1.0.39 spec update: * Bump API patch number and header version number to 39 for this update. Github Issues: * Clarified that only accesses via the specified buffer/image subresource ranges are included in the access scopes (public issue 306). * Add missing valid usage statements for flink:vkCreateComputePipelines and flink:vkCreateGraphicsPipelines (public issue 427). Internal Issues: * Add a Note to the <<invariance,Invariance>> appendix about a difference between OpenGL and Vulkan with regards to how primitives derived from offsets are handled (internal issue 355). * Add the +<<VK_KHR_get_physical_device_properties2>>+, +<<VK_KHR_maintenance1>>+, and +<<VK_KHR_shader_draw_parameters>>+ extensions (internal issue 448). * Add the +<<VK_EXT_shader_subgroup_vote>>+ and +<<VK_EXT_shader_subgroup_ballot>>+ extensions (internal issue 449). * Update the texture level-of-detail equation in the <<textures-scale-factor,Scale Factor Operation>> section to better approximate the ellipse major and minor axes (internal issue 547). * Forbid non-explicitly allowed uses of interface decorations in the introduction to the <<interfaces,Shader Interfaces>> chapter (internal issue 607). * Replace use of MathJax with KaTeX, for improved load-time performance as well as avoiding the scrolling-and-scrolling behavior due to MathJax asynchronous rendering when loading at an anchor inside the spec. This change also requires moving to HTML5 output for the spec instead of XHTML, and there is a visible difference in that the chapter navigation index is now in a scrollable sidebar instead of at the top of the document. We may or may not retain the nav sidebar based on feedback (internal issue 613). * Improve consistency of markup and formatting in extension appendices (internal issue 631). Other Issues: * Add explicit valid usage statements to slink:VkImageCopy requiring that the source and destination layer ranges be contained in their respective source and destination images. * Add valid usage language for swapchain of flink:vkAcquireNextImage. If the swapchain has been replaced, then it should not be passed to flink:vkAcquireNextImage. * Add a valid usage statement to flink:vkCreateImageView, that the image must have been created with an appropriate usage bit set. * Noted that slink:VkDisplayPresentInfoKHR is a valid extension of slink:VkPresentInfoKHR in the <<wsi_swapchain,WSI Swapchain>> section. * Update valid usage for flink:vkCmdSetViewport and flink:vkCmdSetScissor to account for the multiple viewport feature. If the feature is not enabled, the parameters for these functions have required values that are defined in the <<features-features-multiViewport,multiple viewports>> section of the spec but were not reflected in the valid usage text for these functions. * Add the +<<VK_EXT_swapchain_colorspace>>+ extension defining common color spaces.
2017-01-18 04:11:25 +00:00
must: support graphics or compute operations
endif::VK_KHR_maintenance1[]
Change log for May 20, 2017 Vulkan 1.0.50 spec update: * Bump API patch number and header version number to 50 for this update. Github Issues: * Fix numerous minor issues with the VK_EXT_debug_report extension (public issues 478, 483, 486, 489, 490). Internal Issues: * Update flink:vkAllocateDescriptorSets to specify conditions under which to return ename:VK_ERROR_FRAGMENTED_POOL or ename:VK_ERROR_OUT_OF_POOL_MEMORY instead of out-of-host/out-of-device-memory, and improve the <<fundamentals-errorcodes, description of those errors (internal issue 654). * Add a NOTE documenting that flink:vkAcquireNextImageKHR can only signal a single semaphore, and how to deal with that when multiple physical devices in a logical device need to wait on it (internal issue 730). * Improve description of pname:pNext chains of slink:VkPhysicalDeviceImageFormatInfo2KHR and slink:VkImageFormatProperties2KHR (internal issue 814). * Clean up math markup issues in the <<textures, Image Operations>> chapter (internal issue 818). * Update validusage target to use more robust code for preprocessing, by making direct use of Asciidoctor's preprocessor. Added uniqueItems check to JSON vu schema and add clean_validusage target (internal issue 826). * Update style guide to prohibit writing non-self-contained (on a single bullet point) Valid Usage statements, and modify offending Valid Usage statements in the Specification to match, to assist with automatic extraction for the validation layers (internal issue 828). * Add ename:VK_VALIDATION_CHECK_SHADERS_EXT to elink:VkValidationCheckEXT of the `VK_EXT_validation_flags` extension, to selectively disable shader validation. * Remove duplicate valid usage statement for slink:VkImageMemoryBarrier. * Modify reflow.py script to place VUID tag anchors standalone on a line following their corresponding bullet point, and reflow the spec text accordingly (this had been pending since the initial tag deployment). New Extensions: * `VK_AMD_texture_gather_bias_lod`
2017-05-21 00:00:50 +00:00
* [[VUID-vkCmdFillBuffer-dstBuffer-00031]]
If pname:dstBuffer is non-sparse then it must: be bound completely and
Change log for December 10, 2016 Vulkan 1.0.37 spec update: * Bump API patch number and header version number to 37 for this update. Github Issues: * Add usability guarantees on the values returned by flink:vkGetPhysicalDeviceSurfaceCapabilitiesKHR in the slink:VkSurfaceCapabilitiesKHR structure and by flink:vkGetPhysicalDeviceSurfaceFormatsKHR in the pname:pSurfaceFormatCount parameter (public issue 385). * Add elink:VkDebugReportObjectTypeEXT enumerants for new object types introduced by new extensions (public issue 408). * Add +VK_NVX_device_generated_commands+ etext:ACCESS bits and define how they are used (public issue 415). * Fix indentation for slink:VkDebugReportCallbackCreateInfoEXT member descriptions (public issue 419). Internal Issues: * Expand requirements memory binding of non-sparse images and buffers from the <<resources-association,Resource Memory Association>> section into valid usage statements for all of the applicable API calls (internal issue 508). * Explicitly state that valid usage of flink:vkCreateImage requires that flink:vkGetPhysicalDeviceImageFormatProperties would return ename:VK_SUCCESS for the requested image configuration (internal issue 598).
2016-12-11 04:59:58 +00:00
contiguously to a single sname:VkDeviceMemory object
Change log for September 30, 2016 Vulkan 1.0.29 spec update: * Bump API patch number and header version number to 29 for this update. Github Issues: * Remove redundant constraint on slink:VkCommandBufferInheritanceInfo::pname:queryFlags (public issue 224). * Fix typo and remove link in Note in the <<extended-functionality-instance-extensions-and-devices, Instance Extensions and Device Extensions>> section (public issue 359). * Fix erroneous validation statement for the pname:layout member of slink:VkComputePipelineCreateInfo (public issue 362). Internal Issues: * Restore long figure captions using asciidoc sidebar blocks, due to restrictions of asciidoc syntax (internal issue 101). * Replace most latexmath equations with comparable markup in straight asciidoc, which significantly improves time required to fully load and process the HTML forms of the Specification. There are known minor font and alignment inconsistencies with MathJax and PDF rendering of latexmath equations. Please do not file github issues about these. We are aware of the inconsistencies and will make refinements over time, while the performance improvements are compelling in at least some major browsers (internal issue 313). * Move handcoded validity statements from +vk.xml+ into the Specification body, easing work in the single-branch model. Specify the distinction between these explicit statements, and the implicit validity statements inferred from vk.xml. Validity statements now appear in two blocks for each command and structure - handcoded "Valid Usage" and the implicit "Valid Usage (Implicit)" (internal issue 392). * Add the +returnedonly="false"+ attribute to WSI output structures, removing incorrectly generated implicit validity statements for slink:VkDisplayPropertiesKHR, slink:VkDisplayPlanePropertiesKHR, slink:VkDisplayModePropertiesKHR, slink:VkDisplayPlaneCapabilitiesKHR, slink:VkSurfaceCapabilitiesKHR, and slink:VkSurfaceFormatKHR structures (internal issue 486). * Update slink:VkImageLayout to require the ename:VK_IMAGE_USAGE_SAMPLED_BIT be set for sampled depth/stencil images (internal issue 487). * Use an explicit format specifier string for the date command invocation in the +Makefile+ instead of the shorthand -R option, which doesn't work on BSD and MaxOS X date commands (internal issue 500). Other Issues: * Use the terms ``allocation scope'' and ``extension scope'' instead of just ``scope'', and add them to the glossary.
2016-10-01 04:13:37 +00:00
****
Vulkan 1.0 branch 1.0 for release
2016-02-16 09:53:44 +00:00
include::../validity/protos/vkCmdFillBuffer.txt[]
[[clears-updating-buffers]]
== Updating Buffers
Change log for September 16, 2016 Vulkan 1.0.27 spec update: * Bump API patch number and header version number to 27 for this update. Github Issues: * Weaken flink:vkGetPipelineCacheData invariance conditions; previous conditions were stronger than agreed and can't be guaranteed (public issue 280). * Add link to "Vulkan Loader Specification and Architecture Overview" document to Normative References section (public issue 359). Internal Issues: * Be more clear in the <<interfaces-resources-layout-std140, uniform buffer layout>> section that block offsets can be out of order (internal issue 396). * Document that extension authors should add support for their extensions to the validation layers (internal issue 398). * Clarify that the valid range of depth clear values should be limited to the 0..1 range and that copies to depth aspect must also be in this range (internal issue 412). * Specify ``a'' vs. ``an'' use in the style guide (internal issue 432). * Increase the maximum pname:nonCoherentAtomSize value in the <<features-limits-required,Required Limits>> section from 128 to 256 (internal issue 435). * Fix vk_platform.h for compiler errors on some Android platforms (internal issue 441). * Clarify that slink:VkPhysicalDeviceFeatures::pname:pEnabledFeatures == `NULL` disables all features, including the "required" feature pname:robustBufferAccess (internal issue 479). Other Issues: * Expand style guide and make it more self-consistent. * Use ISO 8601 date format everywhere. * Emphasise the correct way of using slink:VkSurfaceCapabilitiesKHR::pname:maxImageCount. * Added +VK_EXT_validation_flags+ extension for validation flag mechanism. * Fix an <<credits,author credit>> to include their current employer.
2016-09-17 04:22:17 +00:00
// refBegin vkCmdUpdateBuffer Update a buffer's contents from host memory
Change log for July 10, 2016 Vulkan 1.0.20 spec update: * Bump API patch number and header version number to 20 for this update. Github Issues: * Replaced existing reference pages by text automatically extracted from the specification source, or generated from vk.xml in some cases. This isn't a complete solution for the reference pages, but puts them in a much better state. The ref pages (only) are now placed under a CC BY open source license, which is more current than the obsolete license previously used. Further improvements to the pages should not edit them directly, but instead concentrate on the specification source from which the ref pages are being extracted (public issues 44, 55, 160; internal issue 389).
2016-07-11 01:13:41 +00:00
Vulkan 1.0 branch 1.0 for release
2016-02-16 09:53:44 +00:00
To update buffer data inline in a command buffer, call:
Change log for July 22, 2016 Vulkan 1.0.22 spec update: * Bump API patch number and header version number to 22 for this update. Github Issues: * Translate the subpass self-dependency language into concrete validity statements, and added a validity statement about the restrictions on layout parameters (public issue 267). * Add validity requirement that slink:VkAttachmentDescription::pname:finalLayout and slink:VkAttachmentReference::pname:layout must not be ename:VK_IMAGE_LAYOUT_UNDEFINED or ename:VK_IMAGE_LAYOUT_PREINITIALIZED (public issue 268). * Clarify that slink:VkSubpassDescription::pname:pResolveAttachments layouts are used. Make language consistent with other attachment arrays (public issue 270). * Changed 64-bit definition for dname:VK_DEFINE_NON_DISPATCHABLE_HANDLE to work for x32 platform in +vk.xml+ and the resulting +vulkan.h+ (public issue 282). * Add missing error return code for flink:vkEnumerateInstanceExtensionProperties and flink:vkEnumerateDeviceExtensionProperties (public issue 285) * Fix several cases of stext::VkStructName.memberName markup to stext::VkStructName::pname:memberName, to match other usage in the spec, and describe this markup in the style guide (public issue 286). * Modified validity language generation script to avoid redundant common ancestor language if covered by generic parent language, and used `Both' instead of `Each' when appropriate (public issue 288). Internal Issues: * Add language about behavior of flink:vkAllocateDescriptorSets when allocation fails due to fragmentation, a new error ename:VK_ERROR_FRAGMENTED_POOL, and a Note explaining the situation (internal issue 309). * For the features of code:PointSize, code:ClipDistance, and code:CullDistance, the SPIR-V capability is required to be declared on use (read or write) rather than on decoration (internal issue 359). * Have desktop versions of GLSL respect precision qualification (code:mediump and code:lowp) when compiling for Vulkan. These will get translated to SPIR-V's code:RelaxedPrecision decoration as they do with OpenGL ES versions of GLSL (ESSL). The default precision of all types is code:highp when using a desktop version (internal issue 360). * Add validity statement for slink:VkImageCreateInfo specifying that multisampled images must be two-dimensional, optimally tiled, and with a single mipmap level (internal issue 369). * Add validity statements to slink:VkImageViewCreateInfo disallowing creation of images or image views with no supported features. Made some slink:VkImageViewCreateInfo validity statements more precise and consistent. Added a Note to the <<features,features>> chapter about formats with no features (internal issue 371). * Remove +manpages+ from default build targets. Nroff outputs containing imbedded latexmath will not render properly. Fixing this is a lot of work for limited use cases (internal issue 401). Other Commits: * Fix flink:vkRenderPassBeginInfo::pname:clearValueCount validity statement to be based on attachment indices rather than the number of cleared attachments (Vulkan-LoaderAndValidationLayers/issues/601). * Convert registry documentation from LaTeX to asciidoc source and rename from +src/spec/readme.tex+ to +src/spec/registry.txt+. * Fix lack of Oxford commas in validity language. * Lots of cleanup of generator scripts and Makefiles to move extension list for generator into the script arguments instead of the body of genvk.py, and express better dependencies between XML, scripts, and generated files.
2016-07-23 10:15:48 +00:00
include::../api/protos/vkCmdUpdateBuffer.txt[]
Vulkan 1.0 branch 1.0 for release
2016-02-16 09:53:44 +00:00
* pname:commandBuffer is the command buffer into which the command will be
recorded.
* pname:dstBuffer is a handle to the buffer to be updated.
* pname:dstOffset is the byte offset into the buffer to start updating,
and must: be a multiple of 4.
* pname:dataSize is the number of bytes to update, and must: be a multiple
of 4.
* pname:pData is a pointer to the source data for the buffer update, and
must: be at least pname:dataSize bytes in size.
Change log for September 23, 2016 Vulkan 1.0.28 spec update: * Bump API patch number and header version number to 28 for this update. Github Issues: * Minor spelling and typography cleanup, add definitions of ename:VK_FALSE and ename:VK_TRUE as just what their names say (public issues 220, 318, 325, 365; internal issues 451, 496) * Clarify that the pname:maxDescriptorSet limits in the <<features-limits-required,Required Limits>> table are n * maxPerStage limit (where n=number of supported stages) (public issue 254). * Minor cleanup to <<boilerplate-platform-macros,Platform-Specific Macro Definitions>> appendix (public issue 314). * Add valid usage statement to slink:VkPipelineLayoutCreateInfo disallowing multiple push constant ranges for the same shader stage (public issue 340). * Clarify the elink:VkSharingMode description of what executing the "same" barriers means in case of ownership transfer (public issue 347). * Rename copyright.txt and add COPYING.md to try and reduce confusion about applicable copyrights (public issue 350). * Extend the table in the <<boilerplate-wsi-header, Window System-Specific Header Control>> section to describe the external headers included when each etext:VK_USE_PLATFORM_* macro is defined (public issue 376). Internal Issues: * Add "Revision History" to the PDF outputs following the table of contents, to match HTML outputs (internal issue 43). * Clarified that flink:vkMapMemory may fail due to virtual address space limitations (internal issue 346). * Add +refBody+ comment markup for ref page autoextraction when required (internal issue 400). * Document proper use of "mipmap" and "mip" in the style guide API naming rules, matching the spelling rules (internal issue 471). * Tweak the <<extensions,Layers and Extensions>> appendix to note that the Specification may be built with arbitrary combinations of extensions (internal issue 483). * Remove incorrect statement allowing slink:VkClearAttachment::pname:colorAttachment to be >= slink:VkSubpassDescription::pname:colorAttachmentCount (internal issue 488). * The <<features-limits-viewportboundsrange,viewportBoundsRange>> is expressed in terms of the pname:maxViewportDimensions but this is actually two values. Clarify that it's based on the larger of the two (if they differ) (internal issue 499). Other Issues: * Reflowed text of the entire spec using the 'reflow' Makefile gater, to (hopefully) reduce future internal git churn as edits are made and extensions added in return for one-time pain. This has no perceptible change on the spec outputs but considerable changes on the asciidoc source (internal issue 367).
2016-09-24 07:58:11 +00:00
pname:dataSize must: be less than or equal to 65536 bytes.
For larger updates, applications can: use buffer to buffer
<<copies-buffers,copies>>.
Vulkan 1.0 branch 1.0 for release
2016-02-16 09:53:44 +00:00
The source data is copied from the user pointer to the command buffer when
the command is called.
Change log for September 23, 2016 Vulkan 1.0.28 spec update: * Bump API patch number and header version number to 28 for this update. Github Issues: * Minor spelling and typography cleanup, add definitions of ename:VK_FALSE and ename:VK_TRUE as just what their names say (public issues 220, 318, 325, 365; internal issues 451, 496) * Clarify that the pname:maxDescriptorSet limits in the <<features-limits-required,Required Limits>> table are n * maxPerStage limit (where n=number of supported stages) (public issue 254). * Minor cleanup to <<boilerplate-platform-macros,Platform-Specific Macro Definitions>> appendix (public issue 314). * Add valid usage statement to slink:VkPipelineLayoutCreateInfo disallowing multiple push constant ranges for the same shader stage (public issue 340). * Clarify the elink:VkSharingMode description of what executing the "same" barriers means in case of ownership transfer (public issue 347). * Rename copyright.txt and add COPYING.md to try and reduce confusion about applicable copyrights (public issue 350). * Extend the table in the <<boilerplate-wsi-header, Window System-Specific Header Control>> section to describe the external headers included when each etext:VK_USE_PLATFORM_* macro is defined (public issue 376). Internal Issues: * Add "Revision History" to the PDF outputs following the table of contents, to match HTML outputs (internal issue 43). * Clarified that flink:vkMapMemory may fail due to virtual address space limitations (internal issue 346). * Add +refBody+ comment markup for ref page autoextraction when required (internal issue 400). * Document proper use of "mipmap" and "mip" in the style guide API naming rules, matching the spelling rules (internal issue 471). * Tweak the <<extensions,Layers and Extensions>> appendix to note that the Specification may be built with arbitrary combinations of extensions (internal issue 483). * Remove incorrect statement allowing slink:VkClearAttachment::pname:colorAttachment to be >= slink:VkSubpassDescription::pname:colorAttachmentCount (internal issue 488). * The <<features-limits-viewportboundsrange,viewportBoundsRange>> is expressed in terms of the pname:maxViewportDimensions but this is actually two values. Clarify that it's based on the larger of the two (if they differ) (internal issue 499). Other Issues: * Reflowed text of the entire spec using the 'reflow' Makefile gater, to (hopefully) reduce future internal git churn as edits are made and extensions added in return for one-time pain. This has no perceptible change on the spec outputs but considerable changes on the asciidoc source (internal issue 367).
2016-09-24 07:58:11 +00:00
fname:vkCmdUpdateBuffer is only allowed outside of a render pass.
Change log for February 10, 2017 Vulkan 1.0.40 spec update: * Bump API patch number and header version number to 40 for this update. * There is a major build change in this release. We are now using the Ruby-based ``asciidoctor'' implementation, rather than the Python-based ``asciidoc'' implementation, to process the specification. While the actual specification markup changes were minimal, this requires a new set of build tools and a very different installation process, especially because we now use an experimental direct-to-PDF backend for Asciidoctor instead of Docbook->dblatex->PDF. It is no longer possible to build the Specification using asciidoc. See doc/specs/vulkan/README.adoc for some guidance on installing the new toolchain components. * There are some minor rendering issues in the PDF output due to teething problems with the asciidoctor toolchain, especially with mathematical equations. We are aware of these and working on them. Github Issues: * Updated sample code for the <<sparsememory-examples-basic,sparse resource binding example>> (public issue 97). * Modify line and point clipping behavior in the <<vertexpostproc-clipping, Primitive Clipping>> section to allow for pop-free behavior. The ability to check for which behavior is implemented may be added a future feature or extension (public issue 113). * Unify the discussions of implicit ordering throughout the spec, in particular in the new sections <<drawing-primitive-order, Primitive Order>>, <<primrast-order, Rasterization Order>>, and <<synchronization-implicit, Implicit Synchronization Guarantees>>; the discussion of <<synchronization-submission-order, submission order>>; and references elsewhere to these sections (public issue 133). * Clarify \<\<descriptorsets-compatibility,Pipeline Layout Compatibility>> language and introduce the term ``identically defined'' (public issue 164). * Add a dependency to the +VK_EXT_debug_marker+ extension that's needed to reuse the object type enum from +VK_EXT_debug_report+, and moves the definition of that enum into +VK_EXT_debug_report+ where it should be (public issue 409). * Remove redundant valid usage statement from slink:VkImageBlit (public issue 421). * Update GL_KHR_vulkan_glsl to allow the ternary operator to result in a specialization constant (public issue 424). * Fix valid usage for flink:VkPipelineShaderStageCreateInfo (public issue 426). * Correct typo in New Objects list for <<VK_EXT_debug_report>> (public issue 447). Internal Issues: * Moved to asciidoctor for spec builds (internal issue 121). * Update style guide to describe where to put new extensions-specific asciidoc files, and what to name them (internal issue 626). * Add src/spec/indexExt.py to autogenerate registry index entries linking into the 1.0-extensions specification, instead of maintaining the index manually. (internal issue 642). * Autogenerate extension dependencies and lists of all extensions and all KHR extensions from the "supported" attributes in +vk.xml+. Execute +make config/extDependency.sh+ from +doc/specs/vulkan+ when a supported extension is added to vk.xml, to regenerate the dependency script. The consequence is that specifying a single extension to the +makeExt+ script will automatically enable all extensions it depends on as well, and that the +makeAllExts+ and +makeKHR+ scripts do not need to be updated when a new extension is supported (internal issue 648). * Put extension appendices all at the same asciidoc section level, so KHR WSI extensions show up in the HTML index (internal issue 648). Other Issues: * Imbed images in the generated HTML specs instead of loading them from the images/ directory. * Fix missing EXT in extension name (ename:VK_EXT_SWAPCHAIN_COLOR_SPACE_EXTENSION_NAME). * Add new +VK_EXT_SMPTE_2086_metadata+ extension. * In the <<platformCreateSurface_xlib,Xlib Surface>> section of the +VK_KHR_xlib_surface+ specification, add language warning users that they always need to call code:XinitThreads. * Use the term "presentable image" (rather than "swapchain image") consistently in +VK_KHR_swapchain+ and related extensions, and add a glossary term defining it. * Relocate the valid usage for samples of flink:vkGetPhysicalDeviceSparseImageFormatProperties2KHR::pname:pFormatInfo to be below the flink:VkPhysicalDeviceSparseImageFormatInfo2KHR structure.
2017-02-11 04:37:39 +00:00
This command is treated as "`transfer`" operation, for the purposes of
Change log for September 23, 2016 Vulkan 1.0.28 spec update: * Bump API patch number and header version number to 28 for this update. Github Issues: * Minor spelling and typography cleanup, add definitions of ename:VK_FALSE and ename:VK_TRUE as just what their names say (public issues 220, 318, 325, 365; internal issues 451, 496) * Clarify that the pname:maxDescriptorSet limits in the <<features-limits-required,Required Limits>> table are n * maxPerStage limit (where n=number of supported stages) (public issue 254). * Minor cleanup to <<boilerplate-platform-macros,Platform-Specific Macro Definitions>> appendix (public issue 314). * Add valid usage statement to slink:VkPipelineLayoutCreateInfo disallowing multiple push constant ranges for the same shader stage (public issue 340). * Clarify the elink:VkSharingMode description of what executing the "same" barriers means in case of ownership transfer (public issue 347). * Rename copyright.txt and add COPYING.md to try and reduce confusion about applicable copyrights (public issue 350). * Extend the table in the <<boilerplate-wsi-header, Window System-Specific Header Control>> section to describe the external headers included when each etext:VK_USE_PLATFORM_* macro is defined (public issue 376). Internal Issues: * Add "Revision History" to the PDF outputs following the table of contents, to match HTML outputs (internal issue 43). * Clarified that flink:vkMapMemory may fail due to virtual address space limitations (internal issue 346). * Add +refBody+ comment markup for ref page autoextraction when required (internal issue 400). * Document proper use of "mipmap" and "mip" in the style guide API naming rules, matching the spelling rules (internal issue 471). * Tweak the <<extensions,Layers and Extensions>> appendix to note that the Specification may be built with arbitrary combinations of extensions (internal issue 483). * Remove incorrect statement allowing slink:VkClearAttachment::pname:colorAttachment to be >= slink:VkSubpassDescription::pname:colorAttachmentCount (internal issue 488). * The <<features-limits-viewportboundsrange,viewportBoundsRange>> is expressed in terms of the pname:maxViewportDimensions but this is actually two values. Clarify that it's based on the larger of the two (if they differ) (internal issue 499). Other Issues: * Reflowed text of the entire spec using the 'reflow' Makefile gater, to (hopefully) reduce future internal git churn as edits are made and extensions added in return for one-time pain. This has no perceptible change on the spec outputs but considerable changes on the asciidoc source (internal issue 367).
2016-09-24 07:58:11 +00:00
synchronization barriers.
The ename:VK_BUFFER_USAGE_TRANSFER_DST_BIT must: be specified in pname:usage
of slink:VkBufferCreateInfo in order for the buffer to be compatible with
fname:vkCmdUpdateBuffer.
Vulkan 1.0 branch 1.0 for release
2016-02-16 09:53:44 +00:00
Change log for September 30, 2016 Vulkan 1.0.29 spec update: * Bump API patch number and header version number to 29 for this update. Github Issues: * Remove redundant constraint on slink:VkCommandBufferInheritanceInfo::pname:queryFlags (public issue 224). * Fix typo and remove link in Note in the <<extended-functionality-instance-extensions-and-devices, Instance Extensions and Device Extensions>> section (public issue 359). * Fix erroneous validation statement for the pname:layout member of slink:VkComputePipelineCreateInfo (public issue 362). Internal Issues: * Restore long figure captions using asciidoc sidebar blocks, due to restrictions of asciidoc syntax (internal issue 101). * Replace most latexmath equations with comparable markup in straight asciidoc, which significantly improves time required to fully load and process the HTML forms of the Specification. There are known minor font and alignment inconsistencies with MathJax and PDF rendering of latexmath equations. Please do not file github issues about these. We are aware of the inconsistencies and will make refinements over time, while the performance improvements are compelling in at least some major browsers (internal issue 313). * Move handcoded validity statements from +vk.xml+ into the Specification body, easing work in the single-branch model. Specify the distinction between these explicit statements, and the implicit validity statements inferred from vk.xml. Validity statements now appear in two blocks for each command and structure - handcoded "Valid Usage" and the implicit "Valid Usage (Implicit)" (internal issue 392). * Add the +returnedonly="false"+ attribute to WSI output structures, removing incorrectly generated implicit validity statements for slink:VkDisplayPropertiesKHR, slink:VkDisplayPlanePropertiesKHR, slink:VkDisplayModePropertiesKHR, slink:VkDisplayPlaneCapabilitiesKHR, slink:VkSurfaceCapabilitiesKHR, and slink:VkSurfaceFormatKHR structures (internal issue 486). * Update slink:VkImageLayout to require the ename:VK_IMAGE_USAGE_SAMPLED_BIT be set for sampled depth/stencil images (internal issue 487). * Use an explicit format specifier string for the date command invocation in the +Makefile+ instead of the shorthand -R option, which doesn't work on BSD and MaxOS X date commands (internal issue 500). Other Issues: * Use the terms ``allocation scope'' and ``extension scope'' instead of just ``scope'', and add them to the glossary.
2016-10-01 04:13:37 +00:00
.Valid Usage
****
Change log for May 20, 2017 Vulkan 1.0.50 spec update: * Bump API patch number and header version number to 50 for this update. Github Issues: * Fix numerous minor issues with the VK_EXT_debug_report extension (public issues 478, 483, 486, 489, 490). Internal Issues: * Update flink:vkAllocateDescriptorSets to specify conditions under which to return ename:VK_ERROR_FRAGMENTED_POOL or ename:VK_ERROR_OUT_OF_POOL_MEMORY instead of out-of-host/out-of-device-memory, and improve the <<fundamentals-errorcodes, description of those errors (internal issue 654). * Add a NOTE documenting that flink:vkAcquireNextImageKHR can only signal a single semaphore, and how to deal with that when multiple physical devices in a logical device need to wait on it (internal issue 730). * Improve description of pname:pNext chains of slink:VkPhysicalDeviceImageFormatInfo2KHR and slink:VkImageFormatProperties2KHR (internal issue 814). * Clean up math markup issues in the <<textures, Image Operations>> chapter (internal issue 818). * Update validusage target to use more robust code for preprocessing, by making direct use of Asciidoctor's preprocessor. Added uniqueItems check to JSON vu schema and add clean_validusage target (internal issue 826). * Update style guide to prohibit writing non-self-contained (on a single bullet point) Valid Usage statements, and modify offending Valid Usage statements in the Specification to match, to assist with automatic extraction for the validation layers (internal issue 828). * Add ename:VK_VALIDATION_CHECK_SHADERS_EXT to elink:VkValidationCheckEXT of the `VK_EXT_validation_flags` extension, to selectively disable shader validation. * Remove duplicate valid usage statement for slink:VkImageMemoryBarrier. * Modify reflow.py script to place VUID tag anchors standalone on a line following their corresponding bullet point, and reflow the spec text accordingly (this had been pending since the initial tag deployment). New Extensions: * `VK_AMD_texture_gather_bias_lod`
2017-05-21 00:00:50 +00:00
* [[VUID-vkCmdUpdateBuffer-dstOffset-00032]]
pname:dstOffset must: be less than the size of pname:dstBuffer
* [[VUID-vkCmdUpdateBuffer-dataSize-00033]]
pname:dataSize must: be less than or equal to the size of
Change log for September 30, 2016 Vulkan 1.0.29 spec update: * Bump API patch number and header version number to 29 for this update. Github Issues: * Remove redundant constraint on slink:VkCommandBufferInheritanceInfo::pname:queryFlags (public issue 224). * Fix typo and remove link in Note in the <<extended-functionality-instance-extensions-and-devices, Instance Extensions and Device Extensions>> section (public issue 359). * Fix erroneous validation statement for the pname:layout member of slink:VkComputePipelineCreateInfo (public issue 362). Internal Issues: * Restore long figure captions using asciidoc sidebar blocks, due to restrictions of asciidoc syntax (internal issue 101). * Replace most latexmath equations with comparable markup in straight asciidoc, which significantly improves time required to fully load and process the HTML forms of the Specification. There are known minor font and alignment inconsistencies with MathJax and PDF rendering of latexmath equations. Please do not file github issues about these. We are aware of the inconsistencies and will make refinements over time, while the performance improvements are compelling in at least some major browsers (internal issue 313). * Move handcoded validity statements from +vk.xml+ into the Specification body, easing work in the single-branch model. Specify the distinction between these explicit statements, and the implicit validity statements inferred from vk.xml. Validity statements now appear in two blocks for each command and structure - handcoded "Valid Usage" and the implicit "Valid Usage (Implicit)" (internal issue 392). * Add the +returnedonly="false"+ attribute to WSI output structures, removing incorrectly generated implicit validity statements for slink:VkDisplayPropertiesKHR, slink:VkDisplayPlanePropertiesKHR, slink:VkDisplayModePropertiesKHR, slink:VkDisplayPlaneCapabilitiesKHR, slink:VkSurfaceCapabilitiesKHR, and slink:VkSurfaceFormatKHR structures (internal issue 486). * Update slink:VkImageLayout to require the ename:VK_IMAGE_USAGE_SAMPLED_BIT be set for sampled depth/stencil images (internal issue 487). * Use an explicit format specifier string for the date command invocation in the +Makefile+ instead of the shorthand -R option, which doesn't work on BSD and MaxOS X date commands (internal issue 500). Other Issues: * Use the terms ``allocation scope'' and ``extension scope'' instead of just ``scope'', and add them to the glossary.
2016-10-01 04:13:37 +00:00
pname:dstBuffer minus pname:dstOffset
Change log for May 20, 2017 Vulkan 1.0.50 spec update: * Bump API patch number and header version number to 50 for this update. Github Issues: * Fix numerous minor issues with the VK_EXT_debug_report extension (public issues 478, 483, 486, 489, 490). Internal Issues: * Update flink:vkAllocateDescriptorSets to specify conditions under which to return ename:VK_ERROR_FRAGMENTED_POOL or ename:VK_ERROR_OUT_OF_POOL_MEMORY instead of out-of-host/out-of-device-memory, and improve the <<fundamentals-errorcodes, description of those errors (internal issue 654). * Add a NOTE documenting that flink:vkAcquireNextImageKHR can only signal a single semaphore, and how to deal with that when multiple physical devices in a logical device need to wait on it (internal issue 730). * Improve description of pname:pNext chains of slink:VkPhysicalDeviceImageFormatInfo2KHR and slink:VkImageFormatProperties2KHR (internal issue 814). * Clean up math markup issues in the <<textures, Image Operations>> chapter (internal issue 818). * Update validusage target to use more robust code for preprocessing, by making direct use of Asciidoctor's preprocessor. Added uniqueItems check to JSON vu schema and add clean_validusage target (internal issue 826). * Update style guide to prohibit writing non-self-contained (on a single bullet point) Valid Usage statements, and modify offending Valid Usage statements in the Specification to match, to assist with automatic extraction for the validation layers (internal issue 828). * Add ename:VK_VALIDATION_CHECK_SHADERS_EXT to elink:VkValidationCheckEXT of the `VK_EXT_validation_flags` extension, to selectively disable shader validation. * Remove duplicate valid usage statement for slink:VkImageMemoryBarrier. * Modify reflow.py script to place VUID tag anchors standalone on a line following their corresponding bullet point, and reflow the spec text accordingly (this had been pending since the initial tag deployment). New Extensions: * `VK_AMD_texture_gather_bias_lod`
2017-05-21 00:00:50 +00:00
* [[VUID-vkCmdUpdateBuffer-dstBuffer-00034]]
pname:dstBuffer must: have been created with
Change log for September 30, 2016 Vulkan 1.0.29 spec update: * Bump API patch number and header version number to 29 for this update. Github Issues: * Remove redundant constraint on slink:VkCommandBufferInheritanceInfo::pname:queryFlags (public issue 224). * Fix typo and remove link in Note in the <<extended-functionality-instance-extensions-and-devices, Instance Extensions and Device Extensions>> section (public issue 359). * Fix erroneous validation statement for the pname:layout member of slink:VkComputePipelineCreateInfo (public issue 362). Internal Issues: * Restore long figure captions using asciidoc sidebar blocks, due to restrictions of asciidoc syntax (internal issue 101). * Replace most latexmath equations with comparable markup in straight asciidoc, which significantly improves time required to fully load and process the HTML forms of the Specification. There are known minor font and alignment inconsistencies with MathJax and PDF rendering of latexmath equations. Please do not file github issues about these. We are aware of the inconsistencies and will make refinements over time, while the performance improvements are compelling in at least some major browsers (internal issue 313). * Move handcoded validity statements from +vk.xml+ into the Specification body, easing work in the single-branch model. Specify the distinction between these explicit statements, and the implicit validity statements inferred from vk.xml. Validity statements now appear in two blocks for each command and structure - handcoded "Valid Usage" and the implicit "Valid Usage (Implicit)" (internal issue 392). * Add the +returnedonly="false"+ attribute to WSI output structures, removing incorrectly generated implicit validity statements for slink:VkDisplayPropertiesKHR, slink:VkDisplayPlanePropertiesKHR, slink:VkDisplayModePropertiesKHR, slink:VkDisplayPlaneCapabilitiesKHR, slink:VkSurfaceCapabilitiesKHR, and slink:VkSurfaceFormatKHR structures (internal issue 486). * Update slink:VkImageLayout to require the ename:VK_IMAGE_USAGE_SAMPLED_BIT be set for sampled depth/stencil images (internal issue 487). * Use an explicit format specifier string for the date command invocation in the +Makefile+ instead of the shorthand -R option, which doesn't work on BSD and MaxOS X date commands (internal issue 500). Other Issues: * Use the terms ``allocation scope'' and ``extension scope'' instead of just ``scope'', and add them to the glossary.
2016-10-01 04:13:37 +00:00
ename:VK_BUFFER_USAGE_TRANSFER_DST_BIT usage flag
Change log for May 20, 2017 Vulkan 1.0.50 spec update: * Bump API patch number and header version number to 50 for this update. Github Issues: * Fix numerous minor issues with the VK_EXT_debug_report extension (public issues 478, 483, 486, 489, 490). Internal Issues: * Update flink:vkAllocateDescriptorSets to specify conditions under which to return ename:VK_ERROR_FRAGMENTED_POOL or ename:VK_ERROR_OUT_OF_POOL_MEMORY instead of out-of-host/out-of-device-memory, and improve the <<fundamentals-errorcodes, description of those errors (internal issue 654). * Add a NOTE documenting that flink:vkAcquireNextImageKHR can only signal a single semaphore, and how to deal with that when multiple physical devices in a logical device need to wait on it (internal issue 730). * Improve description of pname:pNext chains of slink:VkPhysicalDeviceImageFormatInfo2KHR and slink:VkImageFormatProperties2KHR (internal issue 814). * Clean up math markup issues in the <<textures, Image Operations>> chapter (internal issue 818). * Update validusage target to use more robust code for preprocessing, by making direct use of Asciidoctor's preprocessor. Added uniqueItems check to JSON vu schema and add clean_validusage target (internal issue 826). * Update style guide to prohibit writing non-self-contained (on a single bullet point) Valid Usage statements, and modify offending Valid Usage statements in the Specification to match, to assist with automatic extraction for the validation layers (internal issue 828). * Add ename:VK_VALIDATION_CHECK_SHADERS_EXT to elink:VkValidationCheckEXT of the `VK_EXT_validation_flags` extension, to selectively disable shader validation. * Remove duplicate valid usage statement for slink:VkImageMemoryBarrier. * Modify reflow.py script to place VUID tag anchors standalone on a line following their corresponding bullet point, and reflow the spec text accordingly (this had been pending since the initial tag deployment). New Extensions: * `VK_AMD_texture_gather_bias_lod`
2017-05-21 00:00:50 +00:00
* [[VUID-vkCmdUpdateBuffer-dstBuffer-00035]]
If pname:dstBuffer is non-sparse then it must: be bound completely and
Change log for December 10, 2016 Vulkan 1.0.37 spec update: * Bump API patch number and header version number to 37 for this update. Github Issues: * Add usability guarantees on the values returned by flink:vkGetPhysicalDeviceSurfaceCapabilitiesKHR in the slink:VkSurfaceCapabilitiesKHR structure and by flink:vkGetPhysicalDeviceSurfaceFormatsKHR in the pname:pSurfaceFormatCount parameter (public issue 385). * Add elink:VkDebugReportObjectTypeEXT enumerants for new object types introduced by new extensions (public issue 408). * Add +VK_NVX_device_generated_commands+ etext:ACCESS bits and define how they are used (public issue 415). * Fix indentation for slink:VkDebugReportCallbackCreateInfoEXT member descriptions (public issue 419). Internal Issues: * Expand requirements memory binding of non-sparse images and buffers from the <<resources-association,Resource Memory Association>> section into valid usage statements for all of the applicable API calls (internal issue 508). * Explicitly state that valid usage of flink:vkCreateImage requires that flink:vkGetPhysicalDeviceImageFormatProperties would return ename:VK_SUCCESS for the requested image configuration (internal issue 598).
2016-12-11 04:59:58 +00:00
contiguously to a single sname:VkDeviceMemory object
Change log for May 20, 2017 Vulkan 1.0.50 spec update: * Bump API patch number and header version number to 50 for this update. Github Issues: * Fix numerous minor issues with the VK_EXT_debug_report extension (public issues 478, 483, 486, 489, 490). Internal Issues: * Update flink:vkAllocateDescriptorSets to specify conditions under which to return ename:VK_ERROR_FRAGMENTED_POOL or ename:VK_ERROR_OUT_OF_POOL_MEMORY instead of out-of-host/out-of-device-memory, and improve the <<fundamentals-errorcodes, description of those errors (internal issue 654). * Add a NOTE documenting that flink:vkAcquireNextImageKHR can only signal a single semaphore, and how to deal with that when multiple physical devices in a logical device need to wait on it (internal issue 730). * Improve description of pname:pNext chains of slink:VkPhysicalDeviceImageFormatInfo2KHR and slink:VkImageFormatProperties2KHR (internal issue 814). * Clean up math markup issues in the <<textures, Image Operations>> chapter (internal issue 818). * Update validusage target to use more robust code for preprocessing, by making direct use of Asciidoctor's preprocessor. Added uniqueItems check to JSON vu schema and add clean_validusage target (internal issue 826). * Update style guide to prohibit writing non-self-contained (on a single bullet point) Valid Usage statements, and modify offending Valid Usage statements in the Specification to match, to assist with automatic extraction for the validation layers (internal issue 828). * Add ename:VK_VALIDATION_CHECK_SHADERS_EXT to elink:VkValidationCheckEXT of the `VK_EXT_validation_flags` extension, to selectively disable shader validation. * Remove duplicate valid usage statement for slink:VkImageMemoryBarrier. * Modify reflow.py script to place VUID tag anchors standalone on a line following their corresponding bullet point, and reflow the spec text accordingly (this had been pending since the initial tag deployment). New Extensions: * `VK_AMD_texture_gather_bias_lod`
2017-05-21 00:00:50 +00:00
* [[VUID-vkCmdUpdateBuffer-dstOffset-00036]]
pname:dstOffset must: be a multiple of `4`
* [[VUID-vkCmdUpdateBuffer-dataSize-00037]]
pname:dataSize must: be less than or equal to `65536`
* [[VUID-vkCmdUpdateBuffer-dataSize-00038]]
pname:dataSize must: be a multiple of `4`
Change log for September 30, 2016 Vulkan 1.0.29 spec update: * Bump API patch number and header version number to 29 for this update. Github Issues: * Remove redundant constraint on slink:VkCommandBufferInheritanceInfo::pname:queryFlags (public issue 224). * Fix typo and remove link in Note in the <<extended-functionality-instance-extensions-and-devices, Instance Extensions and Device Extensions>> section (public issue 359). * Fix erroneous validation statement for the pname:layout member of slink:VkComputePipelineCreateInfo (public issue 362). Internal Issues: * Restore long figure captions using asciidoc sidebar blocks, due to restrictions of asciidoc syntax (internal issue 101). * Replace most latexmath equations with comparable markup in straight asciidoc, which significantly improves time required to fully load and process the HTML forms of the Specification. There are known minor font and alignment inconsistencies with MathJax and PDF rendering of latexmath equations. Please do not file github issues about these. We are aware of the inconsistencies and will make refinements over time, while the performance improvements are compelling in at least some major browsers (internal issue 313). * Move handcoded validity statements from +vk.xml+ into the Specification body, easing work in the single-branch model. Specify the distinction between these explicit statements, and the implicit validity statements inferred from vk.xml. Validity statements now appear in two blocks for each command and structure - handcoded "Valid Usage" and the implicit "Valid Usage (Implicit)" (internal issue 392). * Add the +returnedonly="false"+ attribute to WSI output structures, removing incorrectly generated implicit validity statements for slink:VkDisplayPropertiesKHR, slink:VkDisplayPlanePropertiesKHR, slink:VkDisplayModePropertiesKHR, slink:VkDisplayPlaneCapabilitiesKHR, slink:VkSurfaceCapabilitiesKHR, and slink:VkSurfaceFormatKHR structures (internal issue 486). * Update slink:VkImageLayout to require the ename:VK_IMAGE_USAGE_SAMPLED_BIT be set for sampled depth/stencil images (internal issue 487). * Use an explicit format specifier string for the date command invocation in the +Makefile+ instead of the shorthand -R option, which doesn't work on BSD and MaxOS X date commands (internal issue 500). Other Issues: * Use the terms ``allocation scope'' and ``extension scope'' instead of just ``scope'', and add them to the glossary.
2016-10-01 04:13:37 +00:00
****
Vulkan 1.0 branch 1.0 for release
2016-02-16 09:53:44 +00:00
include::../validity/protos/vkCmdUpdateBuffer.txt[]
Change log for July 1, 2016 Vulkan 1.0.19 spec update: * Bump API patch number and header version number to 19 for this update. Github Issues: * Clarified how flink:vkGetImageSubresourceLayout interacts with image layouts (public issue 247). * Remove ename:VK_IMAGE_LAYOUT_PREINITIALIZED from valid usage rule for slink:VkImageMemoryBarrier::pname:oldLayout. It is only valid if it is the current layout (public issue 248). * Modify valid usage for flink:vkBindBufferMemory so implementations are free to require a different backing memory size than the buffer size (public issue 251). * Clarify that filtering rules for flink:vkCmdBlitImage always apply, and are usually no-ops if the formats are the same (public issue 253). * Remove 'non-sparse' from description of flink:vkGetBufferMemoryRequirements and flink:vkGetImageMemoryRequirements (public issue 257). * Remove ename:VK_ERROR_LAYER_NOT_PRESENT error code from flink:vkCreateDevice (public issue 259). * Change "must not" to "should not" in constraint on when flink:vkAcquireNextImageKHR is called in the +VK_KHR_swapchain+ branch (public issue 262). * Change type of flink:vkCmdUpdateBuffer::pname:pData from basetype:uint32_t* to basetype:void* (public issue 263). * Change should: to must: in description of where additional segments are placed in the <<[tessellation-tessellator-spacing,Tessellator Spacing>> section (public issue 264). Internal Issues: * Normalize the language of all the compute shader built-ins in the <<interfaces-builtin-variables,Built-in Variables>> section (internal issue 323). * Remove definition of presentation engine internal queue lengths associated with ename:VK_PRESENT_MODE_FIFO_KHR and ename:VK_PRESENT_MODE_FIFO_RELAXED_KHR in the <<Window System Integration,wsi>> chapter (internal issue 374). * The language of a Note was too broad, and implied that loaders for a given OS would statically export functions for WSI extensions that weren't relevant to (or supported on) the OS. Also, removed "Khronos-provided" since the Android loader isn't (internal issue 380) Other Commits: * Add ename:VK_INCOMPLETE to list of return values for flink:vkGetPipelineCacheData. Spec says this value is returnable, but it wasn't listed in the error codes. * Fix "correponds" typo in member definitions for slink:VkSubpassDescription.
2016-07-01 02:34:54 +00:00
[NOTE]
.Note
====
Change log for September 30, 2016 Vulkan 1.0.29 spec update: * Bump API patch number and header version number to 29 for this update. Github Issues: * Remove redundant constraint on slink:VkCommandBufferInheritanceInfo::pname:queryFlags (public issue 224). * Fix typo and remove link in Note in the <<extended-functionality-instance-extensions-and-devices, Instance Extensions and Device Extensions>> section (public issue 359). * Fix erroneous validation statement for the pname:layout member of slink:VkComputePipelineCreateInfo (public issue 362). Internal Issues: * Restore long figure captions using asciidoc sidebar blocks, due to restrictions of asciidoc syntax (internal issue 101). * Replace most latexmath equations with comparable markup in straight asciidoc, which significantly improves time required to fully load and process the HTML forms of the Specification. There are known minor font and alignment inconsistencies with MathJax and PDF rendering of latexmath equations. Please do not file github issues about these. We are aware of the inconsistencies and will make refinements over time, while the performance improvements are compelling in at least some major browsers (internal issue 313). * Move handcoded validity statements from +vk.xml+ into the Specification body, easing work in the single-branch model. Specify the distinction between these explicit statements, and the implicit validity statements inferred from vk.xml. Validity statements now appear in two blocks for each command and structure - handcoded "Valid Usage" and the implicit "Valid Usage (Implicit)" (internal issue 392). * Add the +returnedonly="false"+ attribute to WSI output structures, removing incorrectly generated implicit validity statements for slink:VkDisplayPropertiesKHR, slink:VkDisplayPlanePropertiesKHR, slink:VkDisplayModePropertiesKHR, slink:VkDisplayPlaneCapabilitiesKHR, slink:VkSurfaceCapabilitiesKHR, and slink:VkSurfaceFormatKHR structures (internal issue 486). * Update slink:VkImageLayout to require the ename:VK_IMAGE_USAGE_SAMPLED_BIT be set for sampled depth/stencil images (internal issue 487). * Use an explicit format specifier string for the date command invocation in the +Makefile+ instead of the shorthand -R option, which doesn't work on BSD and MaxOS X date commands (internal issue 500). Other Issues: * Use the terms ``allocation scope'' and ``extension scope'' instead of just ``scope'', and add them to the glossary.
2016-10-01 04:13:37 +00:00
The pname:pData parameter was of type code:uint32_t*` instead of code:void*
prior to revision 1.0.19 of the Specification and dlink:VK_HEADER_VERSION 19
of +vulkan.h+.
Change log for September 23, 2016 Vulkan 1.0.28 spec update: * Bump API patch number and header version number to 28 for this update. Github Issues: * Minor spelling and typography cleanup, add definitions of ename:VK_FALSE and ename:VK_TRUE as just what their names say (public issues 220, 318, 325, 365; internal issues 451, 496) * Clarify that the pname:maxDescriptorSet limits in the <<features-limits-required,Required Limits>> table are n * maxPerStage limit (where n=number of supported stages) (public issue 254). * Minor cleanup to <<boilerplate-platform-macros,Platform-Specific Macro Definitions>> appendix (public issue 314). * Add valid usage statement to slink:VkPipelineLayoutCreateInfo disallowing multiple push constant ranges for the same shader stage (public issue 340). * Clarify the elink:VkSharingMode description of what executing the "same" barriers means in case of ownership transfer (public issue 347). * Rename copyright.txt and add COPYING.md to try and reduce confusion about applicable copyrights (public issue 350). * Extend the table in the <<boilerplate-wsi-header, Window System-Specific Header Control>> section to describe the external headers included when each etext:VK_USE_PLATFORM_* macro is defined (public issue 376). Internal Issues: * Add "Revision History" to the PDF outputs following the table of contents, to match HTML outputs (internal issue 43). * Clarified that flink:vkMapMemory may fail due to virtual address space limitations (internal issue 346). * Add +refBody+ comment markup for ref page autoextraction when required (internal issue 400). * Document proper use of "mipmap" and "mip" in the style guide API naming rules, matching the spelling rules (internal issue 471). * Tweak the <<extensions,Layers and Extensions>> appendix to note that the Specification may be built with arbitrary combinations of extensions (internal issue 483). * Remove incorrect statement allowing slink:VkClearAttachment::pname:colorAttachment to be >= slink:VkSubpassDescription::pname:colorAttachmentCount (internal issue 488). * The <<features-limits-viewportboundsrange,viewportBoundsRange>> is expressed in terms of the pname:maxViewportDimensions but this is actually two values. Clarify that it's based on the larger of the two (if they differ) (internal issue 499). Other Issues: * Reflowed text of the entire spec using the 'reflow' Makefile gater, to (hopefully) reduce future internal git churn as edits are made and extensions added in return for one-time pain. This has no perceptible change on the spec outputs but considerable changes on the asciidoc source (internal issue 367).
2016-09-24 07:58:11 +00:00
This was a historical anomaly, as the source data may be of other types.
Change log for July 1, 2016 Vulkan 1.0.19 spec update: * Bump API patch number and header version number to 19 for this update. Github Issues: * Clarified how flink:vkGetImageSubresourceLayout interacts with image layouts (public issue 247). * Remove ename:VK_IMAGE_LAYOUT_PREINITIALIZED from valid usage rule for slink:VkImageMemoryBarrier::pname:oldLayout. It is only valid if it is the current layout (public issue 248). * Modify valid usage for flink:vkBindBufferMemory so implementations are free to require a different backing memory size than the buffer size (public issue 251). * Clarify that filtering rules for flink:vkCmdBlitImage always apply, and are usually no-ops if the formats are the same (public issue 253). * Remove 'non-sparse' from description of flink:vkGetBufferMemoryRequirements and flink:vkGetImageMemoryRequirements (public issue 257). * Remove ename:VK_ERROR_LAYER_NOT_PRESENT error code from flink:vkCreateDevice (public issue 259). * Change "must not" to "should not" in constraint on when flink:vkAcquireNextImageKHR is called in the +VK_KHR_swapchain+ branch (public issue 262). * Change type of flink:vkCmdUpdateBuffer::pname:pData from basetype:uint32_t* to basetype:void* (public issue 263). * Change should: to must: in description of where additional segments are placed in the <<[tessellation-tessellator-spacing,Tessellator Spacing>> section (public issue 264). Internal Issues: * Normalize the language of all the compute shader built-ins in the <<interfaces-builtin-variables,Built-in Variables>> section (internal issue 323). * Remove definition of presentation engine internal queue lengths associated with ename:VK_PRESENT_MODE_FIFO_KHR and ename:VK_PRESENT_MODE_FIFO_RELAXED_KHR in the <<Window System Integration,wsi>> chapter (internal issue 374). * The language of a Note was too broad, and implied that loaders for a given OS would statically export functions for WSI extensions that weren't relevant to (or supported on) the OS. Also, removed "Khronos-provided" since the Android loader isn't (internal issue 380) Other Commits: * Add ename:VK_INCOMPLETE to list of return values for flink:vkGetPipelineCacheData. Spec says this value is returnable, but it wasn't listed in the error codes. * Fix "correponds" typo in member definitions for slink:VkSubpassDescription.
2016-07-01 02:34:54 +00:00
====