status-im
/
Vulkan-Docs
mirror of https://github.com/status-im/Vulkan-Docs.git
2
0
Fork 0
Code Issues Projects Releases Wiki Activity
Vulkan-Docs/doc/specs/vulkan/appendices/VK_EXT_display_control.txt

93 lines
2.7 KiB
Plaintext
Raw Normal View History

Change log for January 23, 2017 Vulkan 1.0.39 spec update: * Bump API patch number and header version number to 39 for this update. Github Issues: * Clarified that only accesses via the specified buffer/image subresource ranges are included in the access scopes (public issue 306). * Add missing valid usage statements for flink:vkCreateComputePipelines and flink:vkCreateGraphicsPipelines (public issue 427). Internal Issues: * Add a Note to the <<invariance,Invariance>> appendix about a difference between OpenGL and Vulkan with regards to how primitives derived from offsets are handled (internal issue 355). * Add the +<<VK_KHR_get_physical_device_properties2>>+, +<<VK_KHR_maintenance1>>+, and +<<VK_KHR_shader_draw_parameters>>+ extensions (internal issue 448). * Add the +<<VK_EXT_shader_subgroup_vote>>+ and +<<VK_EXT_shader_subgroup_ballot>>+ extensions (internal issue 449). * Update the texture level-of-detail equation in the <<textures-scale-factor,Scale Factor Operation>> section to better approximate the ellipse major and minor axes (internal issue 547). * Forbid non-explicitly allowed uses of interface decorations in the introduction to the <<interfaces,Shader Interfaces>> chapter (internal issue 607). * Replace use of MathJax with KaTeX, for improved load-time performance as well as avoiding the scrolling-and-scrolling behavior due to MathJax asynchronous rendering when loading at an anchor inside the spec. This change also requires moving to HTML5 output for the spec instead of XHTML, and there is a visible difference in that the chapter navigation index is now in a scrollable sidebar instead of at the top of the document. We may or may not retain the nav sidebar based on feedback (internal issue 613). * Improve consistency of markup and formatting in extension appendices (internal issue 631). Other Issues: * Add explicit valid usage statements to slink:VkImageCopy requiring that the source and destination layer ranges be contained in their respective source and destination images. * Add valid usage language for swapchain of flink:vkAcquireNextImage. If the swapchain has been replaced, then it should not be passed to flink:vkAcquireNextImage. * Add a valid usage statement to flink:vkCreateImageView, that the image must have been created with an appropriate usage bit set. * Noted that slink:VkDisplayPresentInfoKHR is a valid extension of slink:VkPresentInfoKHR in the <<wsi_swapchain,WSI Swapchain>> section. * Update valid usage for flink:vkCmdSetViewport and flink:vkCmdSetScissor to account for the multiple viewport feature. If the feature is not enabled, the parameters for these functions have required values that are defined in the <<features-features-multiViewport,multiple viewports>> section of the spec but were not reflected in the valid usage text for these functions. * Add the +<<VK_EXT_swapchain_colorspace>>+ extension defining common color spaces.
2017-01-18 04:11:25 +00:00
[[VK_EXT_display_control]]
== VK_EXT_display_control
*Name String*::
+VK_EXT_display_control+
*Extension Type*::
Device extension
*Registered Extension Number*::
92
*Last Modified Date*::
2016-12-13
*Revision*::
1
*IP Status*::
No known IP claims.
*Dependencies*::
- This extension is written against version 1.0.37 of the Vulkan API.
- Requires +VK_KHR_display+
- Requires +VK_EXT_display_surface_counter+
- Requires +VK_KHR_swapchain+
*Contributors*::
- Pierre Boudier, NVIDIA
- James Jones, NVIDIA
- Damien Leone, NVIDIA
- Pierre-Loup Griffais, Valve
- Daniel Vetter, Intel
*Contacts*::
- James Jones, NVIDIA (jajones 'at' nvidia.com)
This extension defines a set of utility functions for use with the
+VK_KHR_display+ and +VK_KHR_display_swapchain+ extensions.
=== New Enum Constants
Change log for June 4, 2017 Vulkan 1.0.51 spec update: * Bump API patch number and header version number to 51 for this update. Github Issues: * Add Valid Usage statement to flink:vkCmdResolveImage to require that source and destination image formats match (public issue 492). * Specify that a code:char* parameter must: be a valid null-terminated string in the <<fundamentals-implicit-validity, implicit valid usage>> section (public issue 494). * Removed unnecessary VU for slink:VkPhysicalDeviceFeatures which is covered by ename:VK_ERROR_FEATURE_NOT_PRESENT already (public issue 496). * Clarify valid usage of pname:pQueueFamilyIndices in slink:VkBufferCreateInfo, slink:VkImageCreateInfo, and slink:VkSwapchainCreateInfoKHR (public issue 501). * Document that dependencies of enabled extensions must also be enabled in the <<extended-functionality-extensions-dependencies, Extension Dependencies>> section (public issue 507). Internal Issues: * Change slink:VkMappedMemoryRange valid usage to allow pname:offset + pname:size == size of the allocation. Also, if ename:VK_WHOLE_SIZE is used, require the end of the mapping to be aligned to a multiple of pname:nonCoherentAtomSize (internal issue 611). * Add issue to `VK_KHR_win32_surface` about reusing window objects from a different graphics API or Vulkan ICD (internal issue 639). * Require locations on user in/out in `GL_KHR_vulkan_glsl` (internal issue 783). * Added version info to the json validation output, and updated the schema to match (internal issue 838). * Restructure enumerated type descriptions separately from the command or structure they are used in, allowing better reference page generation (internal issue 841). * Re-sort extension appendices to be in alphabetical order within each author ID section. * Fix enum naming and clarify behavior for `VK_NVX_device_generated_commands` extension. New Extensions:
2017-06-05 03:48:43 +00:00
* Extending elink:VkStructureType:
Change log for January 23, 2017 Vulkan 1.0.39 spec update: * Bump API patch number and header version number to 39 for this update. Github Issues: * Clarified that only accesses via the specified buffer/image subresource ranges are included in the access scopes (public issue 306). * Add missing valid usage statements for flink:vkCreateComputePipelines and flink:vkCreateGraphicsPipelines (public issue 427). Internal Issues: * Add a Note to the <<invariance,Invariance>> appendix about a difference between OpenGL and Vulkan with regards to how primitives derived from offsets are handled (internal issue 355). * Add the +<<VK_KHR_get_physical_device_properties2>>+, +<<VK_KHR_maintenance1>>+, and +<<VK_KHR_shader_draw_parameters>>+ extensions (internal issue 448). * Add the +<<VK_EXT_shader_subgroup_vote>>+ and +<<VK_EXT_shader_subgroup_ballot>>+ extensions (internal issue 449). * Update the texture level-of-detail equation in the <<textures-scale-factor,Scale Factor Operation>> section to better approximate the ellipse major and minor axes (internal issue 547). * Forbid non-explicitly allowed uses of interface decorations in the introduction to the <<interfaces,Shader Interfaces>> chapter (internal issue 607). * Replace use of MathJax with KaTeX, for improved load-time performance as well as avoiding the scrolling-and-scrolling behavior due to MathJax asynchronous rendering when loading at an anchor inside the spec. This change also requires moving to HTML5 output for the spec instead of XHTML, and there is a visible difference in that the chapter navigation index is now in a scrollable sidebar instead of at the top of the document. We may or may not retain the nav sidebar based on feedback (internal issue 613). * Improve consistency of markup and formatting in extension appendices (internal issue 631). Other Issues: * Add explicit valid usage statements to slink:VkImageCopy requiring that the source and destination layer ranges be contained in their respective source and destination images. * Add valid usage language for swapchain of flink:vkAcquireNextImage. If the swapchain has been replaced, then it should not be passed to flink:vkAcquireNextImage. * Add a valid usage statement to flink:vkCreateImageView, that the image must have been created with an appropriate usage bit set. * Noted that slink:VkDisplayPresentInfoKHR is a valid extension of slink:VkPresentInfoKHR in the <<wsi_swapchain,WSI Swapchain>> section. * Update valid usage for flink:vkCmdSetViewport and flink:vkCmdSetScissor to account for the multiple viewport feature. If the feature is not enabled, the parameters for these functions have required values that are defined in the <<features-features-multiViewport,multiple viewports>> section of the spec but were not reflected in the valid usage text for these functions. * Add the +<<VK_EXT_swapchain_colorspace>>+ extension defining common color spaces.
2017-01-18 04:11:25 +00:00
** ename:VK_STRUCTURE_TYPE_DISPLAY_POWER_INFO_EXT
** ename:VK_STRUCTURE_TYPE_DEVICE_EVENT_INFO_EXT
** ename:VK_STRUCTURE_TYPE_DISPLAY_EVENT_INFO_EXT
** ename:VK_STRUCTURE_TYPE_SWAPCHAIN_COUNTER_CREATE_INFO_EXT
=== New Enums
* elink:VkDisplayPowerStateEXT
* elink:VkDeviceEventTypeEXT
* elink:VkDisplayEventTypeEXT
=== New Structures
* slink:VkDisplayPowerInfoEXT
* slink:VkDeviceEventInfoEXT
* slink:VkDisplayEventInfoEXT
* slink:VkSwapchainCounterCreateInfoEXT
=== New Functions
* flink:vkDisplayPowerControlEXT
* flink:vkRegisterDeviceEventEXT
* flink:vkRegisterDisplayEventEXT
* flink:vkGetSwapchainCounterEXT
=== Issues
1) Should this extension add an explicit "WaitForVsync" API or a fence
signaled at vsync that the application can wait on?
*RESOLVED*: A fence.
A separate API could later be provided that allows exporting the fence to a
native object that could be inserted into standard run loops on POSIX and
Windows systems.
2) Should callbacks be added for a vsync event, or in general to monitor
events in Vulkan?
*RESOLVED*: No, fences should be used.
Some events are generated by interrupts which are managed in the kernel.
In order to use a callback provided by the application, drivers would need
to have the userspace driver spawn threads that would wait on the kernel
event, and hence the callbacks could be difficult for the application to
synchronize with its other work given they would arrive on a foreign thread.
3) Should vblank or scanline events be exposed?
*RESOLVED*: Vblank events.
Scanline events could be added by a separate extension, but the latency of
processing an interrupt and waking up a userspace event is high enough that
the accuracy of a scanline event would be rather low.
Further, per-scanline interrupts are not supported by all hardware.
=== Version History
* Revision 1, 2016-12-13 (James Jones)
- Initial draft