Vulkan-Docs/doc/specs/vulkan/styleguide.txt

222 lines
8.8 KiB
Plaintext
Raw Normal View History

Change log for January 23, 2017 Vulkan 1.0.39 spec update: * Bump API patch number and header version number to 39 for this update. Github Issues: * Clarified that only accesses via the specified buffer/image subresource ranges are included in the access scopes (public issue 306). * Add missing valid usage statements for flink:vkCreateComputePipelines and flink:vkCreateGraphicsPipelines (public issue 427). Internal Issues: * Add a Note to the <<invariance,Invariance>> appendix about a difference between OpenGL and Vulkan with regards to how primitives derived from offsets are handled (internal issue 355). * Add the +<<VK_KHR_get_physical_device_properties2>>+, +<<VK_KHR_maintenance1>>+, and +<<VK_KHR_shader_draw_parameters>>+ extensions (internal issue 448). * Add the +<<VK_EXT_shader_subgroup_vote>>+ and +<<VK_EXT_shader_subgroup_ballot>>+ extensions (internal issue 449). * Update the texture level-of-detail equation in the <<textures-scale-factor,Scale Factor Operation>> section to better approximate the ellipse major and minor axes (internal issue 547). * Forbid non-explicitly allowed uses of interface decorations in the introduction to the <<interfaces,Shader Interfaces>> chapter (internal issue 607). * Replace use of MathJax with KaTeX, for improved load-time performance as well as avoiding the scrolling-and-scrolling behavior due to MathJax asynchronous rendering when loading at an anchor inside the spec. This change also requires moving to HTML5 output for the spec instead of XHTML, and there is a visible difference in that the chapter navigation index is now in a scrollable sidebar instead of at the top of the document. We may or may not retain the nav sidebar based on feedback (internal issue 613). * Improve consistency of markup and formatting in extension appendices (internal issue 631). Other Issues: * Add explicit valid usage statements to slink:VkImageCopy requiring that the source and destination layer ranges be contained in their respective source and destination images. * Add valid usage language for swapchain of flink:vkAcquireNextImage. If the swapchain has been replaced, then it should not be passed to flink:vkAcquireNextImage. * Add a valid usage statement to flink:vkCreateImageView, that the image must have been created with an appropriate usage bit set. * Noted that slink:VkDisplayPresentInfoKHR is a valid extension of slink:VkPresentInfoKHR in the <<wsi_swapchain,WSI Swapchain>> section. * Update valid usage for flink:vkCmdSetViewport and flink:vkCmdSetScissor to account for the multiple viewport feature. If the feature is not enabled, the parameters for these functions have required values that are defined in the <<features-features-multiViewport,multiple viewports>> section of the spec but were not reflected in the valid usage text for these functions. * Add the +<<VK_EXT_swapchain_colorspace>>+ extension defining common color spaces.
2017-01-18 04:11:25 +00:00
// Copyright (c) 2014-2017 Khronos Group. This work is licensed under a
Change log for July 15, 2016 Vulkan 1.0.21 spec update: * Bump API patch number and header version number to 21 for this update. Github Issues: * Clarify how <<features-supported-sample-counts,sample count queries>> relate to the limits in slink:VkPhysicalDeviceLimits. (public issue 185). * Clarify in the <<interfaces-iointerfaces,Shader Input and Output Interfaces>> section that shader output variables have undefined values until the shader writes to them (public issue 240). * Specify the implicit value of image parameters that cannot be set in slink:VkSwapchainCreateInfo::pname:flags, pname:imageType, pname:mipLevels, pname:samples, pname:tiling, and pname:initialLayout (public issue 243). * Make use of code:NULL and code:VK_NULL_HANDLE consistent in the VK_KHR_swapchain extension (public issue 276). Internal Issues: * Clarify that presenting an image to a display surface swapchain applies the display surface's mode, and that destroying a display surface swapchain may reset the display's mode, in the VK_KHR_display_swapchain extension (internal issue 247). * Better describe what a slink:VkSurfaceKHR is, and that creating one does not set a mode, in the VK_KHR_display extension. This is a round-about way of pointing out that mode setting is not covered by the extension, but rather is performed as a side effect of presentation (internal issue 247). * Add more valid usage statements to flink:vkQueuePresentKHR command when the VK_KHR_display_swapchain extension is present (internal issue 247). * Add more includes to the VK_KHR_swapchain extension to better document interactions with VK_KHR_display_swapchain (internal issue 247). * Clarify restrictions on location aliasing in the <<fxvertex,Fixed-Function Vertex Processing>> section (internal issue 370). * Add mathematical description of blitting to flink:vkCmdBlitImage, and link it to the <<textures,Image Operations>> chapter. Use mathematical notation for ranges of texel coordinates in the <<textures,Image Operations>> chapter. Fixed miscellaneous validity statements for flink:vkCmdBlit and slink:VkImageBlit (internal issue 382). Other Commits: * Added a valid usage rule to flink:VkGraphicsPipelineCreateInfo that the ename:VK_PRIMITIVE_TOPOLOGY_PATCH_LIST topology must only be used when tessellation shaders are used. * Expand the style guide into a formal "Procedures and Conventions" document. Add a API Naming Conventions section, move most of the API Specification Appendix C (Layers and Extensions) content into the new document, and define the resulting procedures as mandatory (where relevant). This more clearly separates use vs. specification of Vulkan APIs. * Update vk_platform.h to handle 32-bit ARMv8 binaries. * Various minor cleanups to the Makefile and build process.
2016-07-16 02:05:43 +00:00
// Creative Commons Attribution 4.0 International License; see
// http://creativecommons.org/licenses/by/4.0/
= Vulkan^(R)^ Documentation and Extensions: Procedures and Conventions
Change log for July 15, 2016 Vulkan 1.0.21 spec update: * Bump API patch number and header version number to 21 for this update. Github Issues: * Clarify how <<features-supported-sample-counts,sample count queries>> relate to the limits in slink:VkPhysicalDeviceLimits. (public issue 185). * Clarify in the <<interfaces-iointerfaces,Shader Input and Output Interfaces>> section that shader output variables have undefined values until the shader writes to them (public issue 240). * Specify the implicit value of image parameters that cannot be set in slink:VkSwapchainCreateInfo::pname:flags, pname:imageType, pname:mipLevels, pname:samples, pname:tiling, and pname:initialLayout (public issue 243). * Make use of code:NULL and code:VK_NULL_HANDLE consistent in the VK_KHR_swapchain extension (public issue 276). Internal Issues: * Clarify that presenting an image to a display surface swapchain applies the display surface's mode, and that destroying a display surface swapchain may reset the display's mode, in the VK_KHR_display_swapchain extension (internal issue 247). * Better describe what a slink:VkSurfaceKHR is, and that creating one does not set a mode, in the VK_KHR_display extension. This is a round-about way of pointing out that mode setting is not covered by the extension, but rather is performed as a side effect of presentation (internal issue 247). * Add more valid usage statements to flink:vkQueuePresentKHR command when the VK_KHR_display_swapchain extension is present (internal issue 247). * Add more includes to the VK_KHR_swapchain extension to better document interactions with VK_KHR_display_swapchain (internal issue 247). * Clarify restrictions on location aliasing in the <<fxvertex,Fixed-Function Vertex Processing>> section (internal issue 370). * Add mathematical description of blitting to flink:vkCmdBlitImage, and link it to the <<textures,Image Operations>> chapter. Use mathematical notation for ranges of texel coordinates in the <<textures,Image Operations>> chapter. Fixed miscellaneous validity statements for flink:vkCmdBlit and slink:VkImageBlit (internal issue 382). Other Commits: * Added a valid usage rule to flink:VkGraphicsPipelineCreateInfo that the ename:VK_PRIMITIVE_TOPOLOGY_PATCH_LIST topology must only be used when tessellation shaders are used. * Expand the style guide into a formal "Procedures and Conventions" document. Add a API Naming Conventions section, move most of the API Specification Appendix C (Layers and Extensions) content into the new document, and define the resulting procedures as mandatory (where relevant). This more clearly separates use vs. specification of Vulkan APIs. * Update vk_platform.h to handle 32-bit ARMv8 binaries. * Various minor cleanups to the Makefile and build process.
2016-07-16 02:05:43 +00:00
Jon Leech, Tobias Hector
Change log for February 10, 2017 Vulkan 1.0.40 spec update: * Bump API patch number and header version number to 40 for this update. * There is a major build change in this release. We are now using the Ruby-based ``asciidoctor'' implementation, rather than the Python-based ``asciidoc'' implementation, to process the specification. While the actual specification markup changes were minimal, this requires a new set of build tools and a very different installation process, especially because we now use an experimental direct-to-PDF backend for Asciidoctor instead of Docbook->dblatex->PDF. It is no longer possible to build the Specification using asciidoc. See doc/specs/vulkan/README.adoc for some guidance on installing the new toolchain components. * There are some minor rendering issues in the PDF output due to teething problems with the asciidoctor toolchain, especially with mathematical equations. We are aware of these and working on them. Github Issues: * Updated sample code for the <<sparsememory-examples-basic,sparse resource binding example>> (public issue 97). * Modify line and point clipping behavior in the <<vertexpostproc-clipping, Primitive Clipping>> section to allow for pop-free behavior. The ability to check for which behavior is implemented may be added a future feature or extension (public issue 113). * Unify the discussions of implicit ordering throughout the spec, in particular in the new sections <<drawing-primitive-order, Primitive Order>>, <<primrast-order, Rasterization Order>>, and <<synchronization-implicit, Implicit Synchronization Guarantees>>; the discussion of <<synchronization-submission-order, submission order>>; and references elsewhere to these sections (public issue 133). * Clarify \<\<descriptorsets-compatibility,Pipeline Layout Compatibility>> language and introduce the term ``identically defined'' (public issue 164). * Add a dependency to the +VK_EXT_debug_marker+ extension that's needed to reuse the object type enum from +VK_EXT_debug_report+, and moves the definition of that enum into +VK_EXT_debug_report+ where it should be (public issue 409). * Remove redundant valid usage statement from slink:VkImageBlit (public issue 421). * Update GL_KHR_vulkan_glsl to allow the ternary operator to result in a specialization constant (public issue 424). * Fix valid usage for flink:VkPipelineShaderStageCreateInfo (public issue 426). * Correct typo in New Objects list for <<VK_EXT_debug_report>> (public issue 447). Internal Issues: * Moved to asciidoctor for spec builds (internal issue 121). * Update style guide to describe where to put new extensions-specific asciidoc files, and what to name them (internal issue 626). * Add src/spec/indexExt.py to autogenerate registry index entries linking into the 1.0-extensions specification, instead of maintaining the index manually. (internal issue 642). * Autogenerate extension dependencies and lists of all extensions and all KHR extensions from the "supported" attributes in +vk.xml+. Execute +make config/extDependency.sh+ from +doc/specs/vulkan+ when a supported extension is added to vk.xml, to regenerate the dependency script. The consequence is that specifying a single extension to the +makeExt+ script will automatically enable all extensions it depends on as well, and that the +makeAllExts+ and +makeKHR+ scripts do not need to be updated when a new extension is supported (internal issue 648). * Put extension appendices all at the same asciidoc section level, so KHR WSI extensions show up in the HTML index (internal issue 648). Other Issues: * Imbed images in the generated HTML specs instead of loading them from the images/ directory. * Fix missing EXT in extension name (ename:VK_EXT_SWAPCHAIN_COLOR_SPACE_EXTENSION_NAME). * Add new +VK_EXT_SMPTE_2086_metadata+ extension. * In the <<platformCreateSurface_xlib,Xlib Surface>> section of the +VK_KHR_xlib_surface+ specification, add language warning users that they always need to call code:XinitThreads. * Use the term "presentable image" (rather than "swapchain image") consistently in +VK_KHR_swapchain+ and related extensions, and add a glossary term defining it. * Relocate the valid usage for samples of flink:vkGetPhysicalDeviceSparseImageFormatProperties2KHR::pname:pFormatInfo to be below the flink:VkPhysicalDeviceSparseImageFormatInfo2KHR structure.
2017-02-11 04:37:39 +00:00
:data-uri:
:icons: font
Change log for July 15, 2016 Vulkan 1.0.21 spec update: * Bump API patch number and header version number to 21 for this update. Github Issues: * Clarify how <<features-supported-sample-counts,sample count queries>> relate to the limits in slink:VkPhysicalDeviceLimits. (public issue 185). * Clarify in the <<interfaces-iointerfaces,Shader Input and Output Interfaces>> section that shader output variables have undefined values until the shader writes to them (public issue 240). * Specify the implicit value of image parameters that cannot be set in slink:VkSwapchainCreateInfo::pname:flags, pname:imageType, pname:mipLevels, pname:samples, pname:tiling, and pname:initialLayout (public issue 243). * Make use of code:NULL and code:VK_NULL_HANDLE consistent in the VK_KHR_swapchain extension (public issue 276). Internal Issues: * Clarify that presenting an image to a display surface swapchain applies the display surface's mode, and that destroying a display surface swapchain may reset the display's mode, in the VK_KHR_display_swapchain extension (internal issue 247). * Better describe what a slink:VkSurfaceKHR is, and that creating one does not set a mode, in the VK_KHR_display extension. This is a round-about way of pointing out that mode setting is not covered by the extension, but rather is performed as a side effect of presentation (internal issue 247). * Add more valid usage statements to flink:vkQueuePresentKHR command when the VK_KHR_display_swapchain extension is present (internal issue 247). * Add more includes to the VK_KHR_swapchain extension to better document interactions with VK_KHR_display_swapchain (internal issue 247). * Clarify restrictions on location aliasing in the <<fxvertex,Fixed-Function Vertex Processing>> section (internal issue 370). * Add mathematical description of blitting to flink:vkCmdBlitImage, and link it to the <<textures,Image Operations>> chapter. Use mathematical notation for ranges of texel coordinates in the <<textures,Image Operations>> chapter. Fixed miscellaneous validity statements for flink:vkCmdBlit and slink:VkImageBlit (internal issue 382). Other Commits: * Added a valid usage rule to flink:VkGraphicsPipelineCreateInfo that the ename:VK_PRIMITIVE_TOPOLOGY_PATCH_LIST topology must only be used when tessellation shaders are used. * Expand the style guide into a formal "Procedures and Conventions" document. Add a API Naming Conventions section, move most of the API Specification Appendix C (Layers and Extensions) content into the new document, and define the resulting procedures as mandatory (where relevant). This more clearly separates use vs. specification of Vulkan APIs. * Update vk_platform.h to handle 32-bit ARMv8 binaries. * Various minor cleanups to the Makefile and build process.
2016-07-16 02:05:43 +00:00
:toc2:
:toclevels: 3
:max-width: 100
:numbered:
:doctype: book
:imagewidth: 800
Change log for February 10, 2017 Vulkan 1.0.40 spec update: * Bump API patch number and header version number to 40 for this update. * There is a major build change in this release. We are now using the Ruby-based ``asciidoctor'' implementation, rather than the Python-based ``asciidoc'' implementation, to process the specification. While the actual specification markup changes were minimal, this requires a new set of build tools and a very different installation process, especially because we now use an experimental direct-to-PDF backend for Asciidoctor instead of Docbook->dblatex->PDF. It is no longer possible to build the Specification using asciidoc. See doc/specs/vulkan/README.adoc for some guidance on installing the new toolchain components. * There are some minor rendering issues in the PDF output due to teething problems with the asciidoctor toolchain, especially with mathematical equations. We are aware of these and working on them. Github Issues: * Updated sample code for the <<sparsememory-examples-basic,sparse resource binding example>> (public issue 97). * Modify line and point clipping behavior in the <<vertexpostproc-clipping, Primitive Clipping>> section to allow for pop-free behavior. The ability to check for which behavior is implemented may be added a future feature or extension (public issue 113). * Unify the discussions of implicit ordering throughout the spec, in particular in the new sections <<drawing-primitive-order, Primitive Order>>, <<primrast-order, Rasterization Order>>, and <<synchronization-implicit, Implicit Synchronization Guarantees>>; the discussion of <<synchronization-submission-order, submission order>>; and references elsewhere to these sections (public issue 133). * Clarify \<\<descriptorsets-compatibility,Pipeline Layout Compatibility>> language and introduce the term ``identically defined'' (public issue 164). * Add a dependency to the +VK_EXT_debug_marker+ extension that's needed to reuse the object type enum from +VK_EXT_debug_report+, and moves the definition of that enum into +VK_EXT_debug_report+ where it should be (public issue 409). * Remove redundant valid usage statement from slink:VkImageBlit (public issue 421). * Update GL_KHR_vulkan_glsl to allow the ternary operator to result in a specialization constant (public issue 424). * Fix valid usage for flink:VkPipelineShaderStageCreateInfo (public issue 426). * Correct typo in New Objects list for <<VK_EXT_debug_report>> (public issue 447). Internal Issues: * Moved to asciidoctor for spec builds (internal issue 121). * Update style guide to describe where to put new extensions-specific asciidoc files, and what to name them (internal issue 626). * Add src/spec/indexExt.py to autogenerate registry index entries linking into the 1.0-extensions specification, instead of maintaining the index manually. (internal issue 642). * Autogenerate extension dependencies and lists of all extensions and all KHR extensions from the "supported" attributes in +vk.xml+. Execute +make config/extDependency.sh+ from +doc/specs/vulkan+ when a supported extension is added to vk.xml, to regenerate the dependency script. The consequence is that specifying a single extension to the +makeExt+ script will automatically enable all extensions it depends on as well, and that the +makeAllExts+ and +makeKHR+ scripts do not need to be updated when a new extension is supported (internal issue 648). * Put extension appendices all at the same asciidoc section level, so KHR WSI extensions show up in the HTML index (internal issue 648). Other Issues: * Imbed images in the generated HTML specs instead of loading them from the images/ directory. * Fix missing EXT in extension name (ename:VK_EXT_SWAPCHAIN_COLOR_SPACE_EXTENSION_NAME). * Add new +VK_EXT_SMPTE_2086_metadata+ extension. * In the <<platformCreateSurface_xlib,Xlib Surface>> section of the +VK_KHR_xlib_surface+ specification, add language warning users that they always need to call code:XinitThreads. * Use the term "presentable image" (rather than "swapchain image") consistently in +VK_KHR_swapchain+ and related extensions, and add a glossary term defining it. * Relocate the valid usage for samples of flink:vkGetPhysicalDeviceSparseImageFormatProperties2KHR::pname:pFormatInfo to be below the flink:VkPhysicalDeviceSparseImageFormatInfo2KHR structure.
2017-02-11 04:37:39 +00:00
:fullimagewidth: width="800"
Change log for July 15, 2016 Vulkan 1.0.21 spec update: * Bump API patch number and header version number to 21 for this update. Github Issues: * Clarify how <<features-supported-sample-counts,sample count queries>> relate to the limits in slink:VkPhysicalDeviceLimits. (public issue 185). * Clarify in the <<interfaces-iointerfaces,Shader Input and Output Interfaces>> section that shader output variables have undefined values until the shader writes to them (public issue 240). * Specify the implicit value of image parameters that cannot be set in slink:VkSwapchainCreateInfo::pname:flags, pname:imageType, pname:mipLevels, pname:samples, pname:tiling, and pname:initialLayout (public issue 243). * Make use of code:NULL and code:VK_NULL_HANDLE consistent in the VK_KHR_swapchain extension (public issue 276). Internal Issues: * Clarify that presenting an image to a display surface swapchain applies the display surface's mode, and that destroying a display surface swapchain may reset the display's mode, in the VK_KHR_display_swapchain extension (internal issue 247). * Better describe what a slink:VkSurfaceKHR is, and that creating one does not set a mode, in the VK_KHR_display extension. This is a round-about way of pointing out that mode setting is not covered by the extension, but rather is performed as a side effect of presentation (internal issue 247). * Add more valid usage statements to flink:vkQueuePresentKHR command when the VK_KHR_display_swapchain extension is present (internal issue 247). * Add more includes to the VK_KHR_swapchain extension to better document interactions with VK_KHR_display_swapchain (internal issue 247). * Clarify restrictions on location aliasing in the <<fxvertex,Fixed-Function Vertex Processing>> section (internal issue 370). * Add mathematical description of blitting to flink:vkCmdBlitImage, and link it to the <<textures,Image Operations>> chapter. Use mathematical notation for ranges of texel coordinates in the <<textures,Image Operations>> chapter. Fixed miscellaneous validity statements for flink:vkCmdBlit and slink:VkImageBlit (internal issue 382). Other Commits: * Added a valid usage rule to flink:VkGraphicsPipelineCreateInfo that the ename:VK_PRIMITIVE_TOPOLOGY_PATCH_LIST topology must only be used when tessellation shaders are used. * Expand the style guide into a formal "Procedures and Conventions" document. Add a API Naming Conventions section, move most of the API Specification Appendix C (Layers and Extensions) content into the new document, and define the resulting procedures as mandatory (where relevant). This more clearly separates use vs. specification of Vulkan APIs. * Update vk_platform.h to handle 32-bit ARMv8 binaries. * Various minor cleanups to the Makefile and build process.
2016-07-16 02:05:43 +00:00
:cl: &#x3a;
Change log for September 30, 2016 Vulkan 1.0.29 spec update: * Bump API patch number and header version number to 29 for this update. Github Issues: * Remove redundant constraint on slink:VkCommandBufferInheritanceInfo::pname:queryFlags (public issue 224). * Fix typo and remove link in Note in the <<extended-functionality-instance-extensions-and-devices, Instance Extensions and Device Extensions>> section (public issue 359). * Fix erroneous validation statement for the pname:layout member of slink:VkComputePipelineCreateInfo (public issue 362). Internal Issues: * Restore long figure captions using asciidoc sidebar blocks, due to restrictions of asciidoc syntax (internal issue 101). * Replace most latexmath equations with comparable markup in straight asciidoc, which significantly improves time required to fully load and process the HTML forms of the Specification. There are known minor font and alignment inconsistencies with MathJax and PDF rendering of latexmath equations. Please do not file github issues about these. We are aware of the inconsistencies and will make refinements over time, while the performance improvements are compelling in at least some major browsers (internal issue 313). * Move handcoded validity statements from +vk.xml+ into the Specification body, easing work in the single-branch model. Specify the distinction between these explicit statements, and the implicit validity statements inferred from vk.xml. Validity statements now appear in two blocks for each command and structure - handcoded "Valid Usage" and the implicit "Valid Usage (Implicit)" (internal issue 392). * Add the +returnedonly="false"+ attribute to WSI output structures, removing incorrectly generated implicit validity statements for slink:VkDisplayPropertiesKHR, slink:VkDisplayPlanePropertiesKHR, slink:VkDisplayModePropertiesKHR, slink:VkDisplayPlaneCapabilitiesKHR, slink:VkSurfaceCapabilitiesKHR, and slink:VkSurfaceFormatKHR structures (internal issue 486). * Update slink:VkImageLayout to require the ename:VK_IMAGE_USAGE_SAMPLED_BIT be set for sampled depth/stencil images (internal issue 487). * Use an explicit format specifier string for the date command invocation in the +Makefile+ instead of the shorthand -R option, which doesn't work on BSD and MaxOS X date commands (internal issue 500). Other Issues: * Use the terms ``allocation scope'' and ``extension scope'' instead of just ``scope'', and add them to the glossary.
2016-10-01 04:13:37 +00:00
// Various special / math symbols. This is easier to edit with than Unicode.
include::config/attribs.txt[]
Change log for July 15, 2016 Vulkan 1.0.21 spec update: * Bump API patch number and header version number to 21 for this update. Github Issues: * Clarify how <<features-supported-sample-counts,sample count queries>> relate to the limits in slink:VkPhysicalDeviceLimits. (public issue 185). * Clarify in the <<interfaces-iointerfaces,Shader Input and Output Interfaces>> section that shader output variables have undefined values until the shader writes to them (public issue 240). * Specify the implicit value of image parameters that cannot be set in slink:VkSwapchainCreateInfo::pname:flags, pname:imageType, pname:mipLevels, pname:samples, pname:tiling, and pname:initialLayout (public issue 243). * Make use of code:NULL and code:VK_NULL_HANDLE consistent in the VK_KHR_swapchain extension (public issue 276). Internal Issues: * Clarify that presenting an image to a display surface swapchain applies the display surface's mode, and that destroying a display surface swapchain may reset the display's mode, in the VK_KHR_display_swapchain extension (internal issue 247). * Better describe what a slink:VkSurfaceKHR is, and that creating one does not set a mode, in the VK_KHR_display extension. This is a round-about way of pointing out that mode setting is not covered by the extension, but rather is performed as a side effect of presentation (internal issue 247). * Add more valid usage statements to flink:vkQueuePresentKHR command when the VK_KHR_display_swapchain extension is present (internal issue 247). * Add more includes to the VK_KHR_swapchain extension to better document interactions with VK_KHR_display_swapchain (internal issue 247). * Clarify restrictions on location aliasing in the <<fxvertex,Fixed-Function Vertex Processing>> section (internal issue 370). * Add mathematical description of blitting to flink:vkCmdBlitImage, and link it to the <<textures,Image Operations>> chapter. Use mathematical notation for ranges of texel coordinates in the <<textures,Image Operations>> chapter. Fixed miscellaneous validity statements for flink:vkCmdBlit and slink:VkImageBlit (internal issue 382). Other Commits: * Added a valid usage rule to flink:VkGraphicsPipelineCreateInfo that the ename:VK_PRIMITIVE_TOPOLOGY_PATCH_LIST topology must only be used when tessellation shaders are used. * Expand the style guide into a formal "Procedures and Conventions" document. Add a API Naming Conventions section, move most of the API Specification Appendix C (Layers and Extensions) content into the new document, and define the resulting procedures as mandatory (where relevant). This more clearly separates use vs. specification of Vulkan APIs. * Update vk_platform.h to handle 32-bit ARMv8 binaries. * Various minor cleanups to the Makefile and build process.
2016-07-16 02:05:43 +00:00
:leveloffset: 1
<<<<
include::copyright-ccby.txt[]
<<<<
[[introduction]]
= Introduction
Change log for September 23, 2016 Vulkan 1.0.28 spec update: * Bump API patch number and header version number to 28 for this update. Github Issues: * Minor spelling and typography cleanup, add definitions of ename:VK_FALSE and ename:VK_TRUE as just what their names say (public issues 220, 318, 325, 365; internal issues 451, 496) * Clarify that the pname:maxDescriptorSet limits in the <<features-limits-required,Required Limits>> table are n * maxPerStage limit (where n=number of supported stages) (public issue 254). * Minor cleanup to <<boilerplate-platform-macros,Platform-Specific Macro Definitions>> appendix (public issue 314). * Add valid usage statement to slink:VkPipelineLayoutCreateInfo disallowing multiple push constant ranges for the same shader stage (public issue 340). * Clarify the elink:VkSharingMode description of what executing the "same" barriers means in case of ownership transfer (public issue 347). * Rename copyright.txt and add COPYING.md to try and reduce confusion about applicable copyrights (public issue 350). * Extend the table in the <<boilerplate-wsi-header, Window System-Specific Header Control>> section to describe the external headers included when each etext:VK_USE_PLATFORM_* macro is defined (public issue 376). Internal Issues: * Add "Revision History" to the PDF outputs following the table of contents, to match HTML outputs (internal issue 43). * Clarified that flink:vkMapMemory may fail due to virtual address space limitations (internal issue 346). * Add +refBody+ comment markup for ref page autoextraction when required (internal issue 400). * Document proper use of "mipmap" and "mip" in the style guide API naming rules, matching the spelling rules (internal issue 471). * Tweak the <<extensions,Layers and Extensions>> appendix to note that the Specification may be built with arbitrary combinations of extensions (internal issue 483). * Remove incorrect statement allowing slink:VkClearAttachment::pname:colorAttachment to be >= slink:VkSubpassDescription::pname:colorAttachmentCount (internal issue 488). * The <<features-limits-viewportboundsrange,viewportBoundsRange>> is expressed in terms of the pname:maxViewportDimensions but this is actually two values. Clarify that it's based on the larger of the two (if they differ) (internal issue 499). Other Issues: * Reflowed text of the entire spec using the 'reflow' Makefile gater, to (hopefully) reduce future internal git churn as edits are made and extensions added in return for one-time pain. This has no perceptible change on the spec outputs but considerable changes on the asciidoc source (internal issue 367).
2016-09-24 07:58:11 +00:00
This document contains required procedures and conventions when writing
specifications for new Vulkan APIs, extensions and layers, or related
Khronos documentation such as white papers and tutorials; or contributing to
existing Vulkan specifications.
These are collectively referred to as _Vulkan Documentation_ or just
_documentation_ below.
The primary focus is the API Specification and API extensions, although all
of the markup and most of the writing style is equally applicable to other
documentation.
The primary purpose is to achieve consistency across the API, as well as
across all of our source and output documents.
Consistency makes it easier for developers, editors, reviewers, and users of
our documentation to understand and modify it.
This document is now formally voted on and approved by the Vulkan Working
Group.
This means that unless explicitly stated otherwise, the procedures and
conventions must be followed If you have a strong desire to modify the
procedures and conventions, such changes must be made through the normal
Change log for July 15, 2016 Vulkan 1.0.21 spec update: * Bump API patch number and header version number to 21 for this update. Github Issues: * Clarify how <<features-supported-sample-counts,sample count queries>> relate to the limits in slink:VkPhysicalDeviceLimits. (public issue 185). * Clarify in the <<interfaces-iointerfaces,Shader Input and Output Interfaces>> section that shader output variables have undefined values until the shader writes to them (public issue 240). * Specify the implicit value of image parameters that cannot be set in slink:VkSwapchainCreateInfo::pname:flags, pname:imageType, pname:mipLevels, pname:samples, pname:tiling, and pname:initialLayout (public issue 243). * Make use of code:NULL and code:VK_NULL_HANDLE consistent in the VK_KHR_swapchain extension (public issue 276). Internal Issues: * Clarify that presenting an image to a display surface swapchain applies the display surface's mode, and that destroying a display surface swapchain may reset the display's mode, in the VK_KHR_display_swapchain extension (internal issue 247). * Better describe what a slink:VkSurfaceKHR is, and that creating one does not set a mode, in the VK_KHR_display extension. This is a round-about way of pointing out that mode setting is not covered by the extension, but rather is performed as a side effect of presentation (internal issue 247). * Add more valid usage statements to flink:vkQueuePresentKHR command when the VK_KHR_display_swapchain extension is present (internal issue 247). * Add more includes to the VK_KHR_swapchain extension to better document interactions with VK_KHR_display_swapchain (internal issue 247). * Clarify restrictions on location aliasing in the <<fxvertex,Fixed-Function Vertex Processing>> section (internal issue 370). * Add mathematical description of blitting to flink:vkCmdBlitImage, and link it to the <<textures,Image Operations>> chapter. Use mathematical notation for ranges of texel coordinates in the <<textures,Image Operations>> chapter. Fixed miscellaneous validity statements for flink:vkCmdBlit and slink:VkImageBlit (internal issue 382). Other Commits: * Added a valid usage rule to flink:VkGraphicsPipelineCreateInfo that the ename:VK_PRIMITIVE_TOPOLOGY_PATCH_LIST topology must only be used when tessellation shaders are used. * Expand the style guide into a formal "Procedures and Conventions" document. Add a API Naming Conventions section, move most of the API Specification Appendix C (Layers and Extensions) content into the new document, and define the resulting procedures as mandatory (where relevant). This more clearly separates use vs. specification of Vulkan APIs. * Update vk_platform.h to handle 32-bit ARMv8 binaries. * Various minor cleanups to the Makefile and build process.
2016-07-16 02:05:43 +00:00
Vulkan Working Group processes.
[[introduction-terminology]]
== Terminology
Change log for March 17, 2017 Vulkan 1.0.44 spec update: * Bump API patch number and header version number to 44 for this update. Github Issues: * Fix description of <<features-extentperimagetype, Allowed Extent Values Based On Image Type>> (public issue 290). * Better specify VK_DEVICE_LOST behavior around flink:vkQueueSubmit, flink:vkWaitForFences, and flink:vkGetFenceStatus (public issue 423). * Clarify definition of flink:vkGetQueryPoolResults::pname:queryCount (public issue 441). * Simplify and clean up normative language. Remove shall and replace recommend and variants with should wherever possible (public issue 448). * Fix all dangling internal cross-references in the 1.0-extensions specification, and add scripts/checkXrefs to find these in the future (public issue 456). * Reverse order of ChangeLog.txt entries so the most recent version is documented first (public issue 463) * Removes "become invalid" which clashes with invalid state for command buffers. (public issue 467) * Disallowed pending state in spec text for vkResetCommandBuffer, matching valid usage (public issue 468) * Removes sentence describing invalid state "like initial state". (public issue 469) * Disallows begin command buffer from resetting command buffers in the "recording" state. (public issue 470) * Removes mention of state from description of VK_COMMAND_POOL_CREATE_RESET_COMMAND_BUFFER_BIT (public issue 471) * Removed extra valid usage statement in VkSubmitInfo (public issue 472) Internal Issues: * Clarify description of the pname:imageLayout member of sname:VkDescriptorImageInfo. * Fix typos where etext:VK_VIEW_TYPE* was used instead of etext:VK_IMAGE_VIEW_TYPE. * Removed the <<VK_KHR_display>> and <<VK_KHR_display_swapchain>> example code from the specification and noted it has been moved to the Vulkan SDK cube demo (internal issue 179). * Reorder VkExternalMemoryHandleTypeFlagBitsNV description (internal issue 480). * Clarify than an implementation is <<fundamentals-validusage-flags,permitted to return 'undefined' bit flags>> in a bitfield (internal issue 640). * Break Valid Usage statements describing unrelated parameters into separate statements, and add a style guide entry to follow this approach (internal issue 685). * Move valid usage statement for slink:VkImageCreateInfo from spec body to the explicit valid usage block (internal issue 693). * Fix typos in the descriptions of slink:VkDisplaySurfaceCreateInfoKHR, flink:vkCreateDisplayModeKHR, and flink:vkGetDisplayPlaneSupportedDisplaysKHR in the <<display,Presenting Directly to Display Devices>> section (internal issue 698, 704, 716). * Clarified that mandatory depth/stencil formats are only a requirement for 2D images (internal issue 719). * Clarify that variables decorated with DeviceIndex/ViewIndex must be in the Input storage class (internal issue 733). * Work around generator script problem with removal of Unicode literals from Python 3.0-3.2 using `future` package (internal issue 737). * Remove nonexistent structure type enums from vk.xml (internal issue 738). * Fix validextensionstructs attributes for structures in the pname:pNext chain for VkPresentInfoKHR, fixing implicit valid usage statements for those structures (internal issue 740). New Extensions:
2017-03-18 05:53:58 +00:00
The key words *must*, *required*, *should*, *recommend*, *may*, and
*optional* in this document are to be interpreted as described in RFC 2119
and by the Vulkan 1.0 Specification in the "`Terminology`" section.
Change log for July 15, 2016 Vulkan 1.0.21 spec update: * Bump API patch number and header version number to 21 for this update. Github Issues: * Clarify how <<features-supported-sample-counts,sample count queries>> relate to the limits in slink:VkPhysicalDeviceLimits. (public issue 185). * Clarify in the <<interfaces-iointerfaces,Shader Input and Output Interfaces>> section that shader output variables have undefined values until the shader writes to them (public issue 240). * Specify the implicit value of image parameters that cannot be set in slink:VkSwapchainCreateInfo::pname:flags, pname:imageType, pname:mipLevels, pname:samples, pname:tiling, and pname:initialLayout (public issue 243). * Make use of code:NULL and code:VK_NULL_HANDLE consistent in the VK_KHR_swapchain extension (public issue 276). Internal Issues: * Clarify that presenting an image to a display surface swapchain applies the display surface's mode, and that destroying a display surface swapchain may reset the display's mode, in the VK_KHR_display_swapchain extension (internal issue 247). * Better describe what a slink:VkSurfaceKHR is, and that creating one does not set a mode, in the VK_KHR_display extension. This is a round-about way of pointing out that mode setting is not covered by the extension, but rather is performed as a side effect of presentation (internal issue 247). * Add more valid usage statements to flink:vkQueuePresentKHR command when the VK_KHR_display_swapchain extension is present (internal issue 247). * Add more includes to the VK_KHR_swapchain extension to better document interactions with VK_KHR_display_swapchain (internal issue 247). * Clarify restrictions on location aliasing in the <<fxvertex,Fixed-Function Vertex Processing>> section (internal issue 370). * Add mathematical description of blitting to flink:vkCmdBlitImage, and link it to the <<textures,Image Operations>> chapter. Use mathematical notation for ranges of texel coordinates in the <<textures,Image Operations>> chapter. Fixed miscellaneous validity statements for flink:vkCmdBlit and slink:VkImageBlit (internal issue 382). Other Commits: * Added a valid usage rule to flink:VkGraphicsPipelineCreateInfo that the ename:VK_PRIMITIVE_TOPOLOGY_PATCH_LIST topology must only be used when tessellation shaders are used. * Expand the style guide into a formal "Procedures and Conventions" document. Add a API Naming Conventions section, move most of the API Specification Appendix C (Layers and Extensions) content into the new document, and define the resulting procedures as mandatory (where relevant). This more clearly separates use vs. specification of Vulkan APIs. * Update vk_platform.h to handle 32-bit ARMv8 binaries. * Various minor cleanups to the Makefile and build process.
2016-07-16 02:05:43 +00:00
[[introduction-structure]]
== Document Structure
The style guide is broken into four sections:
Change log for September 23, 2016 Vulkan 1.0.28 spec update: * Bump API patch number and header version number to 28 for this update. Github Issues: * Minor spelling and typography cleanup, add definitions of ename:VK_FALSE and ename:VK_TRUE as just what their names say (public issues 220, 318, 325, 365; internal issues 451, 496) * Clarify that the pname:maxDescriptorSet limits in the <<features-limits-required,Required Limits>> table are n * maxPerStage limit (where n=number of supported stages) (public issue 254). * Minor cleanup to <<boilerplate-platform-macros,Platform-Specific Macro Definitions>> appendix (public issue 314). * Add valid usage statement to slink:VkPipelineLayoutCreateInfo disallowing multiple push constant ranges for the same shader stage (public issue 340). * Clarify the elink:VkSharingMode description of what executing the "same" barriers means in case of ownership transfer (public issue 347). * Rename copyright.txt and add COPYING.md to try and reduce confusion about applicable copyrights (public issue 350). * Extend the table in the <<boilerplate-wsi-header, Window System-Specific Header Control>> section to describe the external headers included when each etext:VK_USE_PLATFORM_* macro is defined (public issue 376). Internal Issues: * Add "Revision History" to the PDF outputs following the table of contents, to match HTML outputs (internal issue 43). * Clarified that flink:vkMapMemory may fail due to virtual address space limitations (internal issue 346). * Add +refBody+ comment markup for ref page autoextraction when required (internal issue 400). * Document proper use of "mipmap" and "mip" in the style guide API naming rules, matching the spelling rules (internal issue 471). * Tweak the <<extensions,Layers and Extensions>> appendix to note that the Specification may be built with arbitrary combinations of extensions (internal issue 483). * Remove incorrect statement allowing slink:VkClearAttachment::pname:colorAttachment to be >= slink:VkSubpassDescription::pname:colorAttachmentCount (internal issue 488). * The <<features-limits-viewportboundsrange,viewportBoundsRange>> is expressed in terms of the pname:maxViewportDimensions but this is actually two values. Clarify that it's based on the larger of the two (if they differ) (internal issue 499). Other Issues: * Reflowed text of the entire spec using the 'reflow' Makefile gater, to (hopefully) reduce future internal git churn as edits are made and extensions added in return for one-time pain. This has no perceptible change on the spec outputs but considerable changes on the asciidoc source (internal issue 367).
2016-09-24 07:58:11 +00:00
* <<naming,API Naming Conventions>> - the required rules for choosing
names of Vulkan identifiers of all types.
* <<extensions,Extensions and Layers>> - the required procedures for
creating formal Vulkan extensions and layers.
Change log for July 15, 2016 Vulkan 1.0.21 spec update: * Bump API patch number and header version number to 21 for this update. Github Issues: * Clarify how <<features-supported-sample-counts,sample count queries>> relate to the limits in slink:VkPhysicalDeviceLimits. (public issue 185). * Clarify in the <<interfaces-iointerfaces,Shader Input and Output Interfaces>> section that shader output variables have undefined values until the shader writes to them (public issue 240). * Specify the implicit value of image parameters that cannot be set in slink:VkSwapchainCreateInfo::pname:flags, pname:imageType, pname:mipLevels, pname:samples, pname:tiling, and pname:initialLayout (public issue 243). * Make use of code:NULL and code:VK_NULL_HANDLE consistent in the VK_KHR_swapchain extension (public issue 276). Internal Issues: * Clarify that presenting an image to a display surface swapchain applies the display surface's mode, and that destroying a display surface swapchain may reset the display's mode, in the VK_KHR_display_swapchain extension (internal issue 247). * Better describe what a slink:VkSurfaceKHR is, and that creating one does not set a mode, in the VK_KHR_display extension. This is a round-about way of pointing out that mode setting is not covered by the extension, but rather is performed as a side effect of presentation (internal issue 247). * Add more valid usage statements to flink:vkQueuePresentKHR command when the VK_KHR_display_swapchain extension is present (internal issue 247). * Add more includes to the VK_KHR_swapchain extension to better document interactions with VK_KHR_display_swapchain (internal issue 247). * Clarify restrictions on location aliasing in the <<fxvertex,Fixed-Function Vertex Processing>> section (internal issue 370). * Add mathematical description of blitting to flink:vkCmdBlitImage, and link it to the <<textures,Image Operations>> chapter. Use mathematical notation for ranges of texel coordinates in the <<textures,Image Operations>> chapter. Fixed miscellaneous validity statements for flink:vkCmdBlit and slink:VkImageBlit (internal issue 382). Other Commits: * Added a valid usage rule to flink:VkGraphicsPipelineCreateInfo that the ename:VK_PRIMITIVE_TOPOLOGY_PATCH_LIST topology must only be used when tessellation shaders are used. * Expand the style guide into a formal "Procedures and Conventions" document. Add a API Naming Conventions section, move most of the API Specification Appendix C (Layers and Extensions) content into the new document, and define the resulting procedures as mandatory (where relevant). This more clearly separates use vs. specification of Vulkan APIs. * Update vk_platform.h to handle 32-bit ARMv8 binaries. * Various minor cleanups to the Makefile and build process.
2016-07-16 02:05:43 +00:00
* <<markup,Markup Style>> - the required and recommended markup style for
Change log for September 23, 2016 Vulkan 1.0.28 spec update: * Bump API patch number and header version number to 28 for this update. Github Issues: * Minor spelling and typography cleanup, add definitions of ename:VK_FALSE and ename:VK_TRUE as just what their names say (public issues 220, 318, 325, 365; internal issues 451, 496) * Clarify that the pname:maxDescriptorSet limits in the <<features-limits-required,Required Limits>> table are n * maxPerStage limit (where n=number of supported stages) (public issue 254). * Minor cleanup to <<boilerplate-platform-macros,Platform-Specific Macro Definitions>> appendix (public issue 314). * Add valid usage statement to slink:VkPipelineLayoutCreateInfo disallowing multiple push constant ranges for the same shader stage (public issue 340). * Clarify the elink:VkSharingMode description of what executing the "same" barriers means in case of ownership transfer (public issue 347). * Rename copyright.txt and add COPYING.md to try and reduce confusion about applicable copyrights (public issue 350). * Extend the table in the <<boilerplate-wsi-header, Window System-Specific Header Control>> section to describe the external headers included when each etext:VK_USE_PLATFORM_* macro is defined (public issue 376). Internal Issues: * Add "Revision History" to the PDF outputs following the table of contents, to match HTML outputs (internal issue 43). * Clarified that flink:vkMapMemory may fail due to virtual address space limitations (internal issue 346). * Add +refBody+ comment markup for ref page autoextraction when required (internal issue 400). * Document proper use of "mipmap" and "mip" in the style guide API naming rules, matching the spelling rules (internal issue 471). * Tweak the <<extensions,Layers and Extensions>> appendix to note that the Specification may be built with arbitrary combinations of extensions (internal issue 483). * Remove incorrect statement allowing slink:VkClearAttachment::pname:colorAttachment to be >= slink:VkSubpassDescription::pname:colorAttachmentCount (internal issue 488). * The <<features-limits-viewportboundsrange,viewportBoundsRange>> is expressed in terms of the pname:maxViewportDimensions but this is actually two values. Clarify that it's based on the larger of the two (if they differ) (internal issue 499). Other Issues: * Reflowed text of the entire spec using the 'reflow' Makefile gater, to (hopefully) reduce future internal git churn as edits are made and extensions added in return for one-time pain. This has no perceptible change on the spec outputs but considerable changes on the asciidoc source (internal issue 367).
2016-09-24 07:58:11 +00:00
writing asciidoc and XML source that follows consistent formatting and
layout guidelines, tags special terms and phrases for proper processing
by the spec generation tools, etc.
Change log for July 15, 2016 Vulkan 1.0.21 spec update: * Bump API patch number and header version number to 21 for this update. Github Issues: * Clarify how <<features-supported-sample-counts,sample count queries>> relate to the limits in slink:VkPhysicalDeviceLimits. (public issue 185). * Clarify in the <<interfaces-iointerfaces,Shader Input and Output Interfaces>> section that shader output variables have undefined values until the shader writes to them (public issue 240). * Specify the implicit value of image parameters that cannot be set in slink:VkSwapchainCreateInfo::pname:flags, pname:imageType, pname:mipLevels, pname:samples, pname:tiling, and pname:initialLayout (public issue 243). * Make use of code:NULL and code:VK_NULL_HANDLE consistent in the VK_KHR_swapchain extension (public issue 276). Internal Issues: * Clarify that presenting an image to a display surface swapchain applies the display surface's mode, and that destroying a display surface swapchain may reset the display's mode, in the VK_KHR_display_swapchain extension (internal issue 247). * Better describe what a slink:VkSurfaceKHR is, and that creating one does not set a mode, in the VK_KHR_display extension. This is a round-about way of pointing out that mode setting is not covered by the extension, but rather is performed as a side effect of presentation (internal issue 247). * Add more valid usage statements to flink:vkQueuePresentKHR command when the VK_KHR_display_swapchain extension is present (internal issue 247). * Add more includes to the VK_KHR_swapchain extension to better document interactions with VK_KHR_display_swapchain (internal issue 247). * Clarify restrictions on location aliasing in the <<fxvertex,Fixed-Function Vertex Processing>> section (internal issue 370). * Add mathematical description of blitting to flink:vkCmdBlitImage, and link it to the <<textures,Image Operations>> chapter. Use mathematical notation for ranges of texel coordinates in the <<textures,Image Operations>> chapter. Fixed miscellaneous validity statements for flink:vkCmdBlit and slink:VkImageBlit (internal issue 382). Other Commits: * Added a valid usage rule to flink:VkGraphicsPipelineCreateInfo that the ename:VK_PRIMITIVE_TOPOLOGY_PATCH_LIST topology must only be used when tessellation shaders are used. * Expand the style guide into a formal "Procedures and Conventions" document. Add a API Naming Conventions section, move most of the API Specification Appendix C (Layers and Extensions) content into the new document, and define the resulting procedures as mandatory (where relevant). This more clearly separates use vs. specification of Vulkan APIs. * Update vk_platform.h to handle 32-bit ARMv8 binaries. * Various minor cleanups to the Makefile and build process.
2016-07-16 02:05:43 +00:00
* <<writing,Writing Style>> - the required and recommended writing style
Change log for September 23, 2016 Vulkan 1.0.28 spec update: * Bump API patch number and header version number to 28 for this update. Github Issues: * Minor spelling and typography cleanup, add definitions of ename:VK_FALSE and ename:VK_TRUE as just what their names say (public issues 220, 318, 325, 365; internal issues 451, 496) * Clarify that the pname:maxDescriptorSet limits in the <<features-limits-required,Required Limits>> table are n * maxPerStage limit (where n=number of supported stages) (public issue 254). * Minor cleanup to <<boilerplate-platform-macros,Platform-Specific Macro Definitions>> appendix (public issue 314). * Add valid usage statement to slink:VkPipelineLayoutCreateInfo disallowing multiple push constant ranges for the same shader stage (public issue 340). * Clarify the elink:VkSharingMode description of what executing the "same" barriers means in case of ownership transfer (public issue 347). * Rename copyright.txt and add COPYING.md to try and reduce confusion about applicable copyrights (public issue 350). * Extend the table in the <<boilerplate-wsi-header, Window System-Specific Header Control>> section to describe the external headers included when each etext:VK_USE_PLATFORM_* macro is defined (public issue 376). Internal Issues: * Add "Revision History" to the PDF outputs following the table of contents, to match HTML outputs (internal issue 43). * Clarified that flink:vkMapMemory may fail due to virtual address space limitations (internal issue 346). * Add +refBody+ comment markup for ref page autoextraction when required (internal issue 400). * Document proper use of "mipmap" and "mip" in the style guide API naming rules, matching the spelling rules (internal issue 471). * Tweak the <<extensions,Layers and Extensions>> appendix to note that the Specification may be built with arbitrary combinations of extensions (internal issue 483). * Remove incorrect statement allowing slink:VkClearAttachment::pname:colorAttachment to be >= slink:VkSubpassDescription::pname:colorAttachmentCount (internal issue 488). * The <<features-limits-viewportboundsrange,viewportBoundsRange>> is expressed in terms of the pname:maxViewportDimensions but this is actually two values. Clarify that it's based on the larger of the two (if they differ) (internal issue 499). Other Issues: * Reflowed text of the entire spec using the 'reflow' Makefile gater, to (hopefully) reduce future internal git churn as edits are made and extensions added in return for one-time pain. This has no perceptible change on the spec outputs but considerable changes on the asciidoc source (internal issue 367).
2016-09-24 07:58:11 +00:00
for overall and fine-grained structure and conventions, normative
language use, API naming conventions, common words and phrases to use
and to avoid, linking and cross-referencing, etc.
Change log for July 15, 2016 Vulkan 1.0.21 spec update: * Bump API patch number and header version number to 21 for this update. Github Issues: * Clarify how <<features-supported-sample-counts,sample count queries>> relate to the limits in slink:VkPhysicalDeviceLimits. (public issue 185). * Clarify in the <<interfaces-iointerfaces,Shader Input and Output Interfaces>> section that shader output variables have undefined values until the shader writes to them (public issue 240). * Specify the implicit value of image parameters that cannot be set in slink:VkSwapchainCreateInfo::pname:flags, pname:imageType, pname:mipLevels, pname:samples, pname:tiling, and pname:initialLayout (public issue 243). * Make use of code:NULL and code:VK_NULL_HANDLE consistent in the VK_KHR_swapchain extension (public issue 276). Internal Issues: * Clarify that presenting an image to a display surface swapchain applies the display surface's mode, and that destroying a display surface swapchain may reset the display's mode, in the VK_KHR_display_swapchain extension (internal issue 247). * Better describe what a slink:VkSurfaceKHR is, and that creating one does not set a mode, in the VK_KHR_display extension. This is a round-about way of pointing out that mode setting is not covered by the extension, but rather is performed as a side effect of presentation (internal issue 247). * Add more valid usage statements to flink:vkQueuePresentKHR command when the VK_KHR_display_swapchain extension is present (internal issue 247). * Add more includes to the VK_KHR_swapchain extension to better document interactions with VK_KHR_display_swapchain (internal issue 247). * Clarify restrictions on location aliasing in the <<fxvertex,Fixed-Function Vertex Processing>> section (internal issue 370). * Add mathematical description of blitting to flink:vkCmdBlitImage, and link it to the <<textures,Image Operations>> chapter. Use mathematical notation for ranges of texel coordinates in the <<textures,Image Operations>> chapter. Fixed miscellaneous validity statements for flink:vkCmdBlit and slink:VkImageBlit (internal issue 382). Other Commits: * Added a valid usage rule to flink:VkGraphicsPipelineCreateInfo that the ename:VK_PRIMITIVE_TOPOLOGY_PATCH_LIST topology must only be used when tessellation shaders are used. * Expand the style guide into a formal "Procedures and Conventions" document. Add a API Naming Conventions section, move most of the API Specification Appendix C (Layers and Extensions) content into the new document, and define the resulting procedures as mandatory (where relevant). This more clearly separates use vs. specification of Vulkan APIs. * Update vk_platform.h to handle 32-bit ARMv8 binaries. * Various minor cleanups to the Makefile and build process.
2016-07-16 02:05:43 +00:00
[[introduction-asciidoc]]
== Asciidoc Markup
Vulkan Documentation is primarily written in Asciidoc, a form of text markup
Change log for September 23, 2016 Vulkan 1.0.28 spec update: * Bump API patch number and header version number to 28 for this update. Github Issues: * Minor spelling and typography cleanup, add definitions of ename:VK_FALSE and ename:VK_TRUE as just what their names say (public issues 220, 318, 325, 365; internal issues 451, 496) * Clarify that the pname:maxDescriptorSet limits in the <<features-limits-required,Required Limits>> table are n * maxPerStage limit (where n=number of supported stages) (public issue 254). * Minor cleanup to <<boilerplate-platform-macros,Platform-Specific Macro Definitions>> appendix (public issue 314). * Add valid usage statement to slink:VkPipelineLayoutCreateInfo disallowing multiple push constant ranges for the same shader stage (public issue 340). * Clarify the elink:VkSharingMode description of what executing the "same" barriers means in case of ownership transfer (public issue 347). * Rename copyright.txt and add COPYING.md to try and reduce confusion about applicable copyrights (public issue 350). * Extend the table in the <<boilerplate-wsi-header, Window System-Specific Header Control>> section to describe the external headers included when each etext:VK_USE_PLATFORM_* macro is defined (public issue 376). Internal Issues: * Add "Revision History" to the PDF outputs following the table of contents, to match HTML outputs (internal issue 43). * Clarified that flink:vkMapMemory may fail due to virtual address space limitations (internal issue 346). * Add +refBody+ comment markup for ref page autoextraction when required (internal issue 400). * Document proper use of "mipmap" and "mip" in the style guide API naming rules, matching the spelling rules (internal issue 471). * Tweak the <<extensions,Layers and Extensions>> appendix to note that the Specification may be built with arbitrary combinations of extensions (internal issue 483). * Remove incorrect statement allowing slink:VkClearAttachment::pname:colorAttachment to be >= slink:VkSubpassDescription::pname:colorAttachmentCount (internal issue 488). * The <<features-limits-viewportboundsrange,viewportBoundsRange>> is expressed in terms of the pname:maxViewportDimensions but this is actually two values. Clarify that it's based on the larger of the two (if they differ) (internal issue 499). Other Issues: * Reflowed text of the entire spec using the 'reflow' Makefile gater, to (hopefully) reduce future internal git churn as edits are made and extensions added in return for one-time pain. This has no perceptible change on the spec outputs but considerable changes on the asciidoc source (internal issue 367).
2016-09-24 07:58:11 +00:00
language.
Change log for February 10, 2017 Vulkan 1.0.40 spec update: * Bump API patch number and header version number to 40 for this update. * There is a major build change in this release. We are now using the Ruby-based ``asciidoctor'' implementation, rather than the Python-based ``asciidoc'' implementation, to process the specification. While the actual specification markup changes were minimal, this requires a new set of build tools and a very different installation process, especially because we now use an experimental direct-to-PDF backend for Asciidoctor instead of Docbook->dblatex->PDF. It is no longer possible to build the Specification using asciidoc. See doc/specs/vulkan/README.adoc for some guidance on installing the new toolchain components. * There are some minor rendering issues in the PDF output due to teething problems with the asciidoctor toolchain, especially with mathematical equations. We are aware of these and working on them. Github Issues: * Updated sample code for the <<sparsememory-examples-basic,sparse resource binding example>> (public issue 97). * Modify line and point clipping behavior in the <<vertexpostproc-clipping, Primitive Clipping>> section to allow for pop-free behavior. The ability to check for which behavior is implemented may be added a future feature or extension (public issue 113). * Unify the discussions of implicit ordering throughout the spec, in particular in the new sections <<drawing-primitive-order, Primitive Order>>, <<primrast-order, Rasterization Order>>, and <<synchronization-implicit, Implicit Synchronization Guarantees>>; the discussion of <<synchronization-submission-order, submission order>>; and references elsewhere to these sections (public issue 133). * Clarify \<\<descriptorsets-compatibility,Pipeline Layout Compatibility>> language and introduce the term ``identically defined'' (public issue 164). * Add a dependency to the +VK_EXT_debug_marker+ extension that's needed to reuse the object type enum from +VK_EXT_debug_report+, and moves the definition of that enum into +VK_EXT_debug_report+ where it should be (public issue 409). * Remove redundant valid usage statement from slink:VkImageBlit (public issue 421). * Update GL_KHR_vulkan_glsl to allow the ternary operator to result in a specialization constant (public issue 424). * Fix valid usage for flink:VkPipelineShaderStageCreateInfo (public issue 426). * Correct typo in New Objects list for <<VK_EXT_debug_report>> (public issue 447). Internal Issues: * Moved to asciidoctor for spec builds (internal issue 121). * Update style guide to describe where to put new extensions-specific asciidoc files, and what to name them (internal issue 626). * Add src/spec/indexExt.py to autogenerate registry index entries linking into the 1.0-extensions specification, instead of maintaining the index manually. (internal issue 642). * Autogenerate extension dependencies and lists of all extensions and all KHR extensions from the "supported" attributes in +vk.xml+. Execute +make config/extDependency.sh+ from +doc/specs/vulkan+ when a supported extension is added to vk.xml, to regenerate the dependency script. The consequence is that specifying a single extension to the +makeExt+ script will automatically enable all extensions it depends on as well, and that the +makeAllExts+ and +makeKHR+ scripts do not need to be updated when a new extension is supported (internal issue 648). * Put extension appendices all at the same asciidoc section level, so KHR WSI extensions show up in the HTML index (internal issue 648). Other Issues: * Imbed images in the generated HTML specs instead of loading them from the images/ directory. * Fix missing EXT in extension name (ename:VK_EXT_SWAPCHAIN_COLOR_SPACE_EXTENSION_NAME). * Add new +VK_EXT_SMPTE_2086_metadata+ extension. * In the <<platformCreateSurface_xlib,Xlib Surface>> section of the +VK_KHR_xlib_surface+ specification, add language warning users that they always need to call code:XinitThreads. * Use the term "presentable image" (rather than "swapchain image") consistently in +VK_KHR_swapchain+ and related extensions, and add a glossary term defining it. * Relocate the valid usage for samples of flink:vkGetPhysicalDeviceSparseImageFormatProperties2KHR::pname:pFormatInfo to be below the flink:VkPhysicalDeviceSparseImageFormatInfo2KHR structure.
2017-02-11 04:37:39 +00:00
Specifically we're using the version of Asciidoc that is actively maintained
by asciidoctor, which is documented on its website at
http://www.asciidoctor.org/.
Change log for July 15, 2016 Vulkan 1.0.21 spec update: * Bump API patch number and header version number to 21 for this update. Github Issues: * Clarify how <<features-supported-sample-counts,sample count queries>> relate to the limits in slink:VkPhysicalDeviceLimits. (public issue 185). * Clarify in the <<interfaces-iointerfaces,Shader Input and Output Interfaces>> section that shader output variables have undefined values until the shader writes to them (public issue 240). * Specify the implicit value of image parameters that cannot be set in slink:VkSwapchainCreateInfo::pname:flags, pname:imageType, pname:mipLevels, pname:samples, pname:tiling, and pname:initialLayout (public issue 243). * Make use of code:NULL and code:VK_NULL_HANDLE consistent in the VK_KHR_swapchain extension (public issue 276). Internal Issues: * Clarify that presenting an image to a display surface swapchain applies the display surface's mode, and that destroying a display surface swapchain may reset the display's mode, in the VK_KHR_display_swapchain extension (internal issue 247). * Better describe what a slink:VkSurfaceKHR is, and that creating one does not set a mode, in the VK_KHR_display extension. This is a round-about way of pointing out that mode setting is not covered by the extension, but rather is performed as a side effect of presentation (internal issue 247). * Add more valid usage statements to flink:vkQueuePresentKHR command when the VK_KHR_display_swapchain extension is present (internal issue 247). * Add more includes to the VK_KHR_swapchain extension to better document interactions with VK_KHR_display_swapchain (internal issue 247). * Clarify restrictions on location aliasing in the <<fxvertex,Fixed-Function Vertex Processing>> section (internal issue 370). * Add mathematical description of blitting to flink:vkCmdBlitImage, and link it to the <<textures,Image Operations>> chapter. Use mathematical notation for ranges of texel coordinates in the <<textures,Image Operations>> chapter. Fixed miscellaneous validity statements for flink:vkCmdBlit and slink:VkImageBlit (internal issue 382). Other Commits: * Added a valid usage rule to flink:VkGraphicsPipelineCreateInfo that the ename:VK_PRIMITIVE_TOPOLOGY_PATCH_LIST topology must only be used when tessellation shaders are used. * Expand the style guide into a formal "Procedures and Conventions" document. Add a API Naming Conventions section, move most of the API Specification Appendix C (Layers and Extensions) content into the new document, and define the resulting procedures as mandatory (where relevant). This more clearly separates use vs. specification of Vulkan APIs. * Update vk_platform.h to handle 32-bit ARMv8 binaries. * Various minor cleanups to the Makefile and build process.
2016-07-16 02:05:43 +00:00
Change log for February 10, 2017 Vulkan 1.0.40 spec update: * Bump API patch number and header version number to 40 for this update. * There is a major build change in this release. We are now using the Ruby-based ``asciidoctor'' implementation, rather than the Python-based ``asciidoc'' implementation, to process the specification. While the actual specification markup changes were minimal, this requires a new set of build tools and a very different installation process, especially because we now use an experimental direct-to-PDF backend for Asciidoctor instead of Docbook->dblatex->PDF. It is no longer possible to build the Specification using asciidoc. See doc/specs/vulkan/README.adoc for some guidance on installing the new toolchain components. * There are some minor rendering issues in the PDF output due to teething problems with the asciidoctor toolchain, especially with mathematical equations. We are aware of these and working on them. Github Issues: * Updated sample code for the <<sparsememory-examples-basic,sparse resource binding example>> (public issue 97). * Modify line and point clipping behavior in the <<vertexpostproc-clipping, Primitive Clipping>> section to allow for pop-free behavior. The ability to check for which behavior is implemented may be added a future feature or extension (public issue 113). * Unify the discussions of implicit ordering throughout the spec, in particular in the new sections <<drawing-primitive-order, Primitive Order>>, <<primrast-order, Rasterization Order>>, and <<synchronization-implicit, Implicit Synchronization Guarantees>>; the discussion of <<synchronization-submission-order, submission order>>; and references elsewhere to these sections (public issue 133). * Clarify \<\<descriptorsets-compatibility,Pipeline Layout Compatibility>> language and introduce the term ``identically defined'' (public issue 164). * Add a dependency to the +VK_EXT_debug_marker+ extension that's needed to reuse the object type enum from +VK_EXT_debug_report+, and moves the definition of that enum into +VK_EXT_debug_report+ where it should be (public issue 409). * Remove redundant valid usage statement from slink:VkImageBlit (public issue 421). * Update GL_KHR_vulkan_glsl to allow the ternary operator to result in a specialization constant (public issue 424). * Fix valid usage for flink:VkPipelineShaderStageCreateInfo (public issue 426). * Correct typo in New Objects list for <<VK_EXT_debug_report>> (public issue 447). Internal Issues: * Moved to asciidoctor for spec builds (internal issue 121). * Update style guide to describe where to put new extensions-specific asciidoc files, and what to name them (internal issue 626). * Add src/spec/indexExt.py to autogenerate registry index entries linking into the 1.0-extensions specification, instead of maintaining the index manually. (internal issue 642). * Autogenerate extension dependencies and lists of all extensions and all KHR extensions from the "supported" attributes in +vk.xml+. Execute +make config/extDependency.sh+ from +doc/specs/vulkan+ when a supported extension is added to vk.xml, to regenerate the dependency script. The consequence is that specifying a single extension to the +makeExt+ script will automatically enable all extensions it depends on as well, and that the +makeAllExts+ and +makeKHR+ scripts do not need to be updated when a new extension is supported (internal issue 648). * Put extension appendices all at the same asciidoc section level, so KHR WSI extensions show up in the HTML index (internal issue 648). Other Issues: * Imbed images in the generated HTML specs instead of loading them from the images/ directory. * Fix missing EXT in extension name (ename:VK_EXT_SWAPCHAIN_COLOR_SPACE_EXTENSION_NAME). * Add new +VK_EXT_SMPTE_2086_metadata+ extension. * In the <<platformCreateSurface_xlib,Xlib Surface>> section of the +VK_KHR_xlib_surface+ specification, add language warning users that they always need to call code:XinitThreads. * Use the term "presentable image" (rather than "swapchain image") consistently in +VK_KHR_swapchain+ and related extensions, and add a glossary term defining it. * Relocate the valid usage for samples of flink:vkGetPhysicalDeviceSparseImageFormatProperties2KHR::pname:pFormatInfo to be below the flink:VkPhysicalDeviceSparseImageFormatInfo2KHR structure.
2017-02-11 04:37:39 +00:00
References to the Asciidoctor User Manual are to sections in the document at
http://asciidoctor.org/docs/user-manual/.
Change log for July 15, 2016 Vulkan 1.0.21 spec update: * Bump API patch number and header version number to 21 for this update. Github Issues: * Clarify how <<features-supported-sample-counts,sample count queries>> relate to the limits in slink:VkPhysicalDeviceLimits. (public issue 185). * Clarify in the <<interfaces-iointerfaces,Shader Input and Output Interfaces>> section that shader output variables have undefined values until the shader writes to them (public issue 240). * Specify the implicit value of image parameters that cannot be set in slink:VkSwapchainCreateInfo::pname:flags, pname:imageType, pname:mipLevels, pname:samples, pname:tiling, and pname:initialLayout (public issue 243). * Make use of code:NULL and code:VK_NULL_HANDLE consistent in the VK_KHR_swapchain extension (public issue 276). Internal Issues: * Clarify that presenting an image to a display surface swapchain applies the display surface's mode, and that destroying a display surface swapchain may reset the display's mode, in the VK_KHR_display_swapchain extension (internal issue 247). * Better describe what a slink:VkSurfaceKHR is, and that creating one does not set a mode, in the VK_KHR_display extension. This is a round-about way of pointing out that mode setting is not covered by the extension, but rather is performed as a side effect of presentation (internal issue 247). * Add more valid usage statements to flink:vkQueuePresentKHR command when the VK_KHR_display_swapchain extension is present (internal issue 247). * Add more includes to the VK_KHR_swapchain extension to better document interactions with VK_KHR_display_swapchain (internal issue 247). * Clarify restrictions on location aliasing in the <<fxvertex,Fixed-Function Vertex Processing>> section (internal issue 370). * Add mathematical description of blitting to flink:vkCmdBlitImage, and link it to the <<textures,Image Operations>> chapter. Use mathematical notation for ranges of texel coordinates in the <<textures,Image Operations>> chapter. Fixed miscellaneous validity statements for flink:vkCmdBlit and slink:VkImageBlit (internal issue 382). Other Commits: * Added a valid usage rule to flink:VkGraphicsPipelineCreateInfo that the ename:VK_PRIMITIVE_TOPOLOGY_PATCH_LIST topology must only be used when tessellation shaders are used. * Expand the style guide into a formal "Procedures and Conventions" document. Add a API Naming Conventions section, move most of the API Specification Appendix C (Layers and Extensions) content into the new document, and define the resulting procedures as mandatory (where relevant). This more clearly separates use vs. specification of Vulkan APIs. * Update vk_platform.h to handle 32-bit ARMv8 binaries. * Various minor cleanups to the Makefile and build process.
2016-07-16 02:05:43 +00:00
Change log for February 10, 2017 Vulkan 1.0.40 spec update: * Bump API patch number and header version number to 40 for this update. * There is a major build change in this release. We are now using the Ruby-based ``asciidoctor'' implementation, rather than the Python-based ``asciidoc'' implementation, to process the specification. While the actual specification markup changes were minimal, this requires a new set of build tools and a very different installation process, especially because we now use an experimental direct-to-PDF backend for Asciidoctor instead of Docbook->dblatex->PDF. It is no longer possible to build the Specification using asciidoc. See doc/specs/vulkan/README.adoc for some guidance on installing the new toolchain components. * There are some minor rendering issues in the PDF output due to teething problems with the asciidoctor toolchain, especially with mathematical equations. We are aware of these and working on them. Github Issues: * Updated sample code for the <<sparsememory-examples-basic,sparse resource binding example>> (public issue 97). * Modify line and point clipping behavior in the <<vertexpostproc-clipping, Primitive Clipping>> section to allow for pop-free behavior. The ability to check for which behavior is implemented may be added a future feature or extension (public issue 113). * Unify the discussions of implicit ordering throughout the spec, in particular in the new sections <<drawing-primitive-order, Primitive Order>>, <<primrast-order, Rasterization Order>>, and <<synchronization-implicit, Implicit Synchronization Guarantees>>; the discussion of <<synchronization-submission-order, submission order>>; and references elsewhere to these sections (public issue 133). * Clarify \<\<descriptorsets-compatibility,Pipeline Layout Compatibility>> language and introduce the term ``identically defined'' (public issue 164). * Add a dependency to the +VK_EXT_debug_marker+ extension that's needed to reuse the object type enum from +VK_EXT_debug_report+, and moves the definition of that enum into +VK_EXT_debug_report+ where it should be (public issue 409). * Remove redundant valid usage statement from slink:VkImageBlit (public issue 421). * Update GL_KHR_vulkan_glsl to allow the ternary operator to result in a specialization constant (public issue 424). * Fix valid usage for flink:VkPipelineShaderStageCreateInfo (public issue 426). * Correct typo in New Objects list for <<VK_EXT_debug_report>> (public issue 447). Internal Issues: * Moved to asciidoctor for spec builds (internal issue 121). * Update style guide to describe where to put new extensions-specific asciidoc files, and what to name them (internal issue 626). * Add src/spec/indexExt.py to autogenerate registry index entries linking into the 1.0-extensions specification, instead of maintaining the index manually. (internal issue 642). * Autogenerate extension dependencies and lists of all extensions and all KHR extensions from the "supported" attributes in +vk.xml+. Execute +make config/extDependency.sh+ from +doc/specs/vulkan+ when a supported extension is added to vk.xml, to regenerate the dependency script. The consequence is that specifying a single extension to the +makeExt+ script will automatically enable all extensions it depends on as well, and that the +makeAllExts+ and +makeKHR+ scripts do not need to be updated when a new extension is supported (internal issue 648). * Put extension appendices all at the same asciidoc section level, so KHR WSI extensions show up in the HTML index (internal issue 648). Other Issues: * Imbed images in the generated HTML specs instead of loading them from the images/ directory. * Fix missing EXT in extension name (ename:VK_EXT_SWAPCHAIN_COLOR_SPACE_EXTENSION_NAME). * Add new +VK_EXT_SMPTE_2086_metadata+ extension. * In the <<platformCreateSurface_xlib,Xlib Surface>> section of the +VK_KHR_xlib_surface+ specification, add language warning users that they always need to call code:XinitThreads. * Use the term "presentable image" (rather than "swapchain image") consistently in +VK_KHR_swapchain+ and related extensions, and add a glossary term defining it. * Relocate the valid usage for samples of flink:vkGetPhysicalDeviceSparseImageFormatProperties2KHR::pname:pFormatInfo to be below the flink:VkPhysicalDeviceSparseImageFormatInfo2KHR structure.
2017-02-11 04:37:39 +00:00
Asciidoctor is implemented in Ruby (https://www.ruby-lang.org/), which is
available for Linux, MacOS, and Microsoft Windows.
Multiple preview tools also exist for the language, primarily using
AsciidoctorJ (https://github.com/asciidoctor/asciidoctorj) or asciidoctor.js
(https://github.com/asciidoctor/asciidoctor.js).
In particular, GitHub and GitLab both have asciidoc previews for .adoc or
.asciidoc files in repositories, and live preview extensions exist for
Chrome and Firefox.
Change log for July 15, 2016 Vulkan 1.0.21 spec update: * Bump API patch number and header version number to 21 for this update. Github Issues: * Clarify how <<features-supported-sample-counts,sample count queries>> relate to the limits in slink:VkPhysicalDeviceLimits. (public issue 185). * Clarify in the <<interfaces-iointerfaces,Shader Input and Output Interfaces>> section that shader output variables have undefined values until the shader writes to them (public issue 240). * Specify the implicit value of image parameters that cannot be set in slink:VkSwapchainCreateInfo::pname:flags, pname:imageType, pname:mipLevels, pname:samples, pname:tiling, and pname:initialLayout (public issue 243). * Make use of code:NULL and code:VK_NULL_HANDLE consistent in the VK_KHR_swapchain extension (public issue 276). Internal Issues: * Clarify that presenting an image to a display surface swapchain applies the display surface's mode, and that destroying a display surface swapchain may reset the display's mode, in the VK_KHR_display_swapchain extension (internal issue 247). * Better describe what a slink:VkSurfaceKHR is, and that creating one does not set a mode, in the VK_KHR_display extension. This is a round-about way of pointing out that mode setting is not covered by the extension, but rather is performed as a side effect of presentation (internal issue 247). * Add more valid usage statements to flink:vkQueuePresentKHR command when the VK_KHR_display_swapchain extension is present (internal issue 247). * Add more includes to the VK_KHR_swapchain extension to better document interactions with VK_KHR_display_swapchain (internal issue 247). * Clarify restrictions on location aliasing in the <<fxvertex,Fixed-Function Vertex Processing>> section (internal issue 370). * Add mathematical description of blitting to flink:vkCmdBlitImage, and link it to the <<textures,Image Operations>> chapter. Use mathematical notation for ranges of texel coordinates in the <<textures,Image Operations>> chapter. Fixed miscellaneous validity statements for flink:vkCmdBlit and slink:VkImageBlit (internal issue 382). Other Commits: * Added a valid usage rule to flink:VkGraphicsPipelineCreateInfo that the ename:VK_PRIMITIVE_TOPOLOGY_PATCH_LIST topology must only be used when tessellation shaders are used. * Expand the style guide into a formal "Procedures and Conventions" document. Add a API Naming Conventions section, move most of the API Specification Appendix C (Layers and Extensions) content into the new document, and define the resulting procedures as mandatory (where relevant). This more clearly separates use vs. specification of Vulkan APIs. * Update vk_platform.h to handle 32-bit ARMv8 binaries. * Various minor cleanups to the Makefile and build process.
2016-07-16 02:05:43 +00:00
Change log for February 10, 2017 Vulkan 1.0.40 spec update: * Bump API patch number and header version number to 40 for this update. * There is a major build change in this release. We are now using the Ruby-based ``asciidoctor'' implementation, rather than the Python-based ``asciidoc'' implementation, to process the specification. While the actual specification markup changes were minimal, this requires a new set of build tools and a very different installation process, especially because we now use an experimental direct-to-PDF backend for Asciidoctor instead of Docbook->dblatex->PDF. It is no longer possible to build the Specification using asciidoc. See doc/specs/vulkan/README.adoc for some guidance on installing the new toolchain components. * There are some minor rendering issues in the PDF output due to teething problems with the asciidoctor toolchain, especially with mathematical equations. We are aware of these and working on them. Github Issues: * Updated sample code for the <<sparsememory-examples-basic,sparse resource binding example>> (public issue 97). * Modify line and point clipping behavior in the <<vertexpostproc-clipping, Primitive Clipping>> section to allow for pop-free behavior. The ability to check for which behavior is implemented may be added a future feature or extension (public issue 113). * Unify the discussions of implicit ordering throughout the spec, in particular in the new sections <<drawing-primitive-order, Primitive Order>>, <<primrast-order, Rasterization Order>>, and <<synchronization-implicit, Implicit Synchronization Guarantees>>; the discussion of <<synchronization-submission-order, submission order>>; and references elsewhere to these sections (public issue 133). * Clarify \<\<descriptorsets-compatibility,Pipeline Layout Compatibility>> language and introduce the term ``identically defined'' (public issue 164). * Add a dependency to the +VK_EXT_debug_marker+ extension that's needed to reuse the object type enum from +VK_EXT_debug_report+, and moves the definition of that enum into +VK_EXT_debug_report+ where it should be (public issue 409). * Remove redundant valid usage statement from slink:VkImageBlit (public issue 421). * Update GL_KHR_vulkan_glsl to allow the ternary operator to result in a specialization constant (public issue 424). * Fix valid usage for flink:VkPipelineShaderStageCreateInfo (public issue 426). * Correct typo in New Objects list for <<VK_EXT_debug_report>> (public issue 447). Internal Issues: * Moved to asciidoctor for spec builds (internal issue 121). * Update style guide to describe where to put new extensions-specific asciidoc files, and what to name them (internal issue 626). * Add src/spec/indexExt.py to autogenerate registry index entries linking into the 1.0-extensions specification, instead of maintaining the index manually. (internal issue 642). * Autogenerate extension dependencies and lists of all extensions and all KHR extensions from the "supported" attributes in +vk.xml+. Execute +make config/extDependency.sh+ from +doc/specs/vulkan+ when a supported extension is added to vk.xml, to regenerate the dependency script. The consequence is that specifying a single extension to the +makeExt+ script will automatically enable all extensions it depends on as well, and that the +makeAllExts+ and +makeKHR+ scripts do not need to be updated when a new extension is supported (internal issue 648). * Put extension appendices all at the same asciidoc section level, so KHR WSI extensions show up in the HTML index (internal issue 648). Other Issues: * Imbed images in the generated HTML specs instead of loading them from the images/ directory. * Fix missing EXT in extension name (ename:VK_EXT_SWAPCHAIN_COLOR_SPACE_EXTENSION_NAME). * Add new +VK_EXT_SMPTE_2086_metadata+ extension. * In the <<platformCreateSurface_xlib,Xlib Surface>> section of the +VK_KHR_xlib_surface+ specification, add language warning users that they always need to call code:XinitThreads. * Use the term "presentable image" (rather than "swapchain image") consistently in +VK_KHR_swapchain+ and related extensions, and add a glossary term defining it. * Relocate the valid usage for samples of flink:vkGetPhysicalDeviceSparseImageFormatProperties2KHR::pname:pFormatInfo to be below the flink:VkPhysicalDeviceSparseImageFormatInfo2KHR structure.
2017-02-11 04:37:39 +00:00
The Asciidoctor toolchain and build process are not addressed by this
document, which concentrates solely on source documents.
Change log for July 15, 2016 Vulkan 1.0.21 spec update: * Bump API patch number and header version number to 21 for this update. Github Issues: * Clarify how <<features-supported-sample-counts,sample count queries>> relate to the limits in slink:VkPhysicalDeviceLimits. (public issue 185). * Clarify in the <<interfaces-iointerfaces,Shader Input and Output Interfaces>> section that shader output variables have undefined values until the shader writes to them (public issue 240). * Specify the implicit value of image parameters that cannot be set in slink:VkSwapchainCreateInfo::pname:flags, pname:imageType, pname:mipLevels, pname:samples, pname:tiling, and pname:initialLayout (public issue 243). * Make use of code:NULL and code:VK_NULL_HANDLE consistent in the VK_KHR_swapchain extension (public issue 276). Internal Issues: * Clarify that presenting an image to a display surface swapchain applies the display surface's mode, and that destroying a display surface swapchain may reset the display's mode, in the VK_KHR_display_swapchain extension (internal issue 247). * Better describe what a slink:VkSurfaceKHR is, and that creating one does not set a mode, in the VK_KHR_display extension. This is a round-about way of pointing out that mode setting is not covered by the extension, but rather is performed as a side effect of presentation (internal issue 247). * Add more valid usage statements to flink:vkQueuePresentKHR command when the VK_KHR_display_swapchain extension is present (internal issue 247). * Add more includes to the VK_KHR_swapchain extension to better document interactions with VK_KHR_display_swapchain (internal issue 247). * Clarify restrictions on location aliasing in the <<fxvertex,Fixed-Function Vertex Processing>> section (internal issue 370). * Add mathematical description of blitting to flink:vkCmdBlitImage, and link it to the <<textures,Image Operations>> chapter. Use mathematical notation for ranges of texel coordinates in the <<textures,Image Operations>> chapter. Fixed miscellaneous validity statements for flink:vkCmdBlit and slink:VkImageBlit (internal issue 382). Other Commits: * Added a valid usage rule to flink:VkGraphicsPipelineCreateInfo that the ename:VK_PRIMITIVE_TOPOLOGY_PATCH_LIST topology must only be used when tessellation shaders are used. * Expand the style guide into a formal "Procedures and Conventions" document. Add a API Naming Conventions section, move most of the API Specification Appendix C (Layers and Extensions) content into the new document, and define the resulting procedures as mandatory (where relevant). This more clearly separates use vs. specification of Vulkan APIs. * Update vk_platform.h to handle 32-bit ARMv8 binaries. * Various minor cleanups to the Makefile and build process.
2016-07-16 02:05:43 +00:00
[[introduction-normative]]
== Normative References
Normative references are references to external documents or resources to
which documentation authors must comply.
Change log for September 16, 2016 Vulkan 1.0.27 spec update: * Bump API patch number and header version number to 27 for this update. Github Issues: * Weaken flink:vkGetPipelineCacheData invariance conditions; previous conditions were stronger than agreed and can't be guaranteed (public issue 280). * Add link to "Vulkan Loader Specification and Architecture Overview" document to Normative References section (public issue 359). Internal Issues: * Be more clear in the <<interfaces-resources-layout-std140, uniform buffer layout>> section that block offsets can be out of order (internal issue 396). * Document that extension authors should add support for their extensions to the validation layers (internal issue 398). * Clarify that the valid range of depth clear values should be limited to the 0..1 range and that copies to depth aspect must also be in this range (internal issue 412). * Specify ``a'' vs. ``an'' use in the style guide (internal issue 432). * Increase the maximum pname:nonCoherentAtomSize value in the <<features-limits-required,Required Limits>> section from 128 to 256 (internal issue 435). * Fix vk_platform.h for compiler errors on some Android platforms (internal issue 441). * Clarify that slink:VkPhysicalDeviceFeatures::pname:pEnabledFeatures == `NULL` disables all features, including the "required" feature pname:robustBufferAccess (internal issue 479). Other Issues: * Expand style guide and make it more self-consistent. * Use ISO 8601 date format everywhere. * Emphasise the correct way of using slink:VkSurfaceCapabilitiesKHR::pname:maxImageCount. * Added +VK_EXT_validation_flags+ extension for validation flag mechanism. * Fix an <<credits,author credit>> to include their current employer.
2016-09-17 04:22:17 +00:00
[[iso-8601]]
Change log for September 23, 2016 Vulkan 1.0.28 spec update: * Bump API patch number and header version number to 28 for this update. Github Issues: * Minor spelling and typography cleanup, add definitions of ename:VK_FALSE and ename:VK_TRUE as just what their names say (public issues 220, 318, 325, 365; internal issues 451, 496) * Clarify that the pname:maxDescriptorSet limits in the <<features-limits-required,Required Limits>> table are n * maxPerStage limit (where n=number of supported stages) (public issue 254). * Minor cleanup to <<boilerplate-platform-macros,Platform-Specific Macro Definitions>> appendix (public issue 314). * Add valid usage statement to slink:VkPipelineLayoutCreateInfo disallowing multiple push constant ranges for the same shader stage (public issue 340). * Clarify the elink:VkSharingMode description of what executing the "same" barriers means in case of ownership transfer (public issue 347). * Rename copyright.txt and add COPYING.md to try and reduce confusion about applicable copyrights (public issue 350). * Extend the table in the <<boilerplate-wsi-header, Window System-Specific Header Control>> section to describe the external headers included when each etext:VK_USE_PLATFORM_* macro is defined (public issue 376). Internal Issues: * Add "Revision History" to the PDF outputs following the table of contents, to match HTML outputs (internal issue 43). * Clarified that flink:vkMapMemory may fail due to virtual address space limitations (internal issue 346). * Add +refBody+ comment markup for ref page autoextraction when required (internal issue 400). * Document proper use of "mipmap" and "mip" in the style guide API naming rules, matching the spelling rules (internal issue 471). * Tweak the <<extensions,Layers and Extensions>> appendix to note that the Specification may be built with arbitrary combinations of extensions (internal issue 483). * Remove incorrect statement allowing slink:VkClearAttachment::pname:colorAttachment to be >= slink:VkSubpassDescription::pname:colorAttachmentCount (internal issue 488). * The <<features-limits-viewportboundsrange,viewportBoundsRange>> is expressed in terms of the pname:maxViewportDimensions but this is actually two values. Clarify that it's based on the larger of the two (if they differ) (internal issue 499). Other Issues: * Reflowed text of the entire spec using the 'reflow' Makefile gater, to (hopefully) reduce future internal git churn as edits are made and extensions added in return for one-time pain. This has no perceptible change on the spec outputs but considerable changes on the asciidoc source (internal issue 367).
2016-09-24 07:58:11 +00:00
International Organization for Standardization, _Data elements and
interchange formats -- Information interchange -- Representation of dates
and times_, http://www.iso.org/iso/catalogue_detail?csnumber=40874,
Change log for September 16, 2016 Vulkan 1.0.27 spec update: * Bump API patch number and header version number to 27 for this update. Github Issues: * Weaken flink:vkGetPipelineCacheData invariance conditions; previous conditions were stronger than agreed and can't be guaranteed (public issue 280). * Add link to "Vulkan Loader Specification and Architecture Overview" document to Normative References section (public issue 359). Internal Issues: * Be more clear in the <<interfaces-resources-layout-std140, uniform buffer layout>> section that block offsets can be out of order (internal issue 396). * Document that extension authors should add support for their extensions to the validation layers (internal issue 398). * Clarify that the valid range of depth clear values should be limited to the 0..1 range and that copies to depth aspect must also be in this range (internal issue 412). * Specify ``a'' vs. ``an'' use in the style guide (internal issue 432). * Increase the maximum pname:nonCoherentAtomSize value in the <<features-limits-required,Required Limits>> section from 128 to 256 (internal issue 435). * Fix vk_platform.h for compiler errors on some Android platforms (internal issue 441). * Clarify that slink:VkPhysicalDeviceFeatures::pname:pEnabledFeatures == `NULL` disables all features, including the "required" feature pname:robustBufferAccess (internal issue 479). Other Issues: * Expand style guide and make it more self-consistent. * Use ISO 8601 date format everywhere. * Emphasise the correct way of using slink:VkSurfaceCapabilitiesKHR::pname:maxImageCount. * Added +VK_EXT_validation_flags+ extension for validation flag mechanism. * Fix an <<credits,author credit>> to include their current employer.
2016-09-17 04:22:17 +00:00
2004-12-01.
Also see https://www.w3.org/QA/Tips/iso-date for colloquial examples.
[[vulkan-docs]]
Change log for September 23, 2016 Vulkan 1.0.28 spec update: * Bump API patch number and header version number to 28 for this update. Github Issues: * Minor spelling and typography cleanup, add definitions of ename:VK_FALSE and ename:VK_TRUE as just what their names say (public issues 220, 318, 325, 365; internal issues 451, 496) * Clarify that the pname:maxDescriptorSet limits in the <<features-limits-required,Required Limits>> table are n * maxPerStage limit (where n=number of supported stages) (public issue 254). * Minor cleanup to <<boilerplate-platform-macros,Platform-Specific Macro Definitions>> appendix (public issue 314). * Add valid usage statement to slink:VkPipelineLayoutCreateInfo disallowing multiple push constant ranges for the same shader stage (public issue 340). * Clarify the elink:VkSharingMode description of what executing the "same" barriers means in case of ownership transfer (public issue 347). * Rename copyright.txt and add COPYING.md to try and reduce confusion about applicable copyrights (public issue 350). * Extend the table in the <<boilerplate-wsi-header, Window System-Specific Header Control>> section to describe the external headers included when each etext:VK_USE_PLATFORM_* macro is defined (public issue 376). Internal Issues: * Add "Revision History" to the PDF outputs following the table of contents, to match HTML outputs (internal issue 43). * Clarified that flink:vkMapMemory may fail due to virtual address space limitations (internal issue 346). * Add +refBody+ comment markup for ref page autoextraction when required (internal issue 400). * Document proper use of "mipmap" and "mip" in the style guide API naming rules, matching the spelling rules (internal issue 471). * Tweak the <<extensions,Layers and Extensions>> appendix to note that the Specification may be built with arbitrary combinations of extensions (internal issue 483). * Remove incorrect statement allowing slink:VkClearAttachment::pname:colorAttachment to be >= slink:VkSubpassDescription::pname:colorAttachmentCount (internal issue 488). * The <<features-limits-viewportboundsrange,viewportBoundsRange>> is expressed in terms of the pname:maxViewportDimensions but this is actually two values. Clarify that it's based on the larger of the two (if they differ) (internal issue 499). Other Issues: * Reflowed text of the entire spec using the 'reflow' Makefile gater, to (hopefully) reduce future internal git churn as edits are made and extensions added in return for one-time pain. This has no perceptible change on the spec outputs but considerable changes on the asciidoc source (internal issue 367).
2016-09-24 07:58:11 +00:00
Khronos Vulkan Working Group, +KhronosGroup/Vulkan-Docs+ project on GitHub,
https://github.com/KhronosGroup/Vulkan-Docs, 2016-07-05.
Change log for July 15, 2016 Vulkan 1.0.21 spec update: * Bump API patch number and header version number to 21 for this update. Github Issues: * Clarify how <<features-supported-sample-counts,sample count queries>> relate to the limits in slink:VkPhysicalDeviceLimits. (public issue 185). * Clarify in the <<interfaces-iointerfaces,Shader Input and Output Interfaces>> section that shader output variables have undefined values until the shader writes to them (public issue 240). * Specify the implicit value of image parameters that cannot be set in slink:VkSwapchainCreateInfo::pname:flags, pname:imageType, pname:mipLevels, pname:samples, pname:tiling, and pname:initialLayout (public issue 243). * Make use of code:NULL and code:VK_NULL_HANDLE consistent in the VK_KHR_swapchain extension (public issue 276). Internal Issues: * Clarify that presenting an image to a display surface swapchain applies the display surface's mode, and that destroying a display surface swapchain may reset the display's mode, in the VK_KHR_display_swapchain extension (internal issue 247). * Better describe what a slink:VkSurfaceKHR is, and that creating one does not set a mode, in the VK_KHR_display extension. This is a round-about way of pointing out that mode setting is not covered by the extension, but rather is performed as a side effect of presentation (internal issue 247). * Add more valid usage statements to flink:vkQueuePresentKHR command when the VK_KHR_display_swapchain extension is present (internal issue 247). * Add more includes to the VK_KHR_swapchain extension to better document interactions with VK_KHR_display_swapchain (internal issue 247). * Clarify restrictions on location aliasing in the <<fxvertex,Fixed-Function Vertex Processing>> section (internal issue 370). * Add mathematical description of blitting to flink:vkCmdBlitImage, and link it to the <<textures,Image Operations>> chapter. Use mathematical notation for ranges of texel coordinates in the <<textures,Image Operations>> chapter. Fixed miscellaneous validity statements for flink:vkCmdBlit and slink:VkImageBlit (internal issue 382). Other Commits: * Added a valid usage rule to flink:VkGraphicsPipelineCreateInfo that the ename:VK_PRIMITIVE_TOPOLOGY_PATCH_LIST topology must only be used when tessellation shaders are used. * Expand the style guide into a formal "Procedures and Conventions" document. Add a API Naming Conventions section, move most of the API Specification Appendix C (Layers and Extensions) content into the new document, and define the resulting procedures as mandatory (where relevant). This more clearly separates use vs. specification of Vulkan APIs. * Update vk_platform.h to handle 32-bit ARMv8 binaries. * Various minor cleanups to the Makefile and build process.
2016-07-16 02:05:43 +00:00
Change log for September 16, 2016 Vulkan 1.0.27 spec update: * Bump API patch number and header version number to 27 for this update. Github Issues: * Weaken flink:vkGetPipelineCacheData invariance conditions; previous conditions were stronger than agreed and can't be guaranteed (public issue 280). * Add link to "Vulkan Loader Specification and Architecture Overview" document to Normative References section (public issue 359). Internal Issues: * Be more clear in the <<interfaces-resources-layout-std140, uniform buffer layout>> section that block offsets can be out of order (internal issue 396). * Document that extension authors should add support for their extensions to the validation layers (internal issue 398). * Clarify that the valid range of depth clear values should be limited to the 0..1 range and that copies to depth aspect must also be in this range (internal issue 412). * Specify ``a'' vs. ``an'' use in the style guide (internal issue 432). * Increase the maximum pname:nonCoherentAtomSize value in the <<features-limits-required,Required Limits>> section from 128 to 256 (internal issue 435). * Fix vk_platform.h for compiler errors on some Android platforms (internal issue 441). * Clarify that slink:VkPhysicalDeviceFeatures::pname:pEnabledFeatures == `NULL` disables all features, including the "required" feature pname:robustBufferAccess (internal issue 479). Other Issues: * Expand style guide and make it more self-consistent. * Use ISO 8601 date format everywhere. * Emphasise the correct way of using slink:VkSurfaceCapabilitiesKHR::pname:maxImageCount. * Added +VK_EXT_validation_flags+ extension for validation flag mechanism. * Fix an <<credits,author credit>> to include their current employer.
2016-09-17 04:22:17 +00:00
[[vulkan-spec]]
Change log for September 23, 2016 Vulkan 1.0.28 spec update: * Bump API patch number and header version number to 28 for this update. Github Issues: * Minor spelling and typography cleanup, add definitions of ename:VK_FALSE and ename:VK_TRUE as just what their names say (public issues 220, 318, 325, 365; internal issues 451, 496) * Clarify that the pname:maxDescriptorSet limits in the <<features-limits-required,Required Limits>> table are n * maxPerStage limit (where n=number of supported stages) (public issue 254). * Minor cleanup to <<boilerplate-platform-macros,Platform-Specific Macro Definitions>> appendix (public issue 314). * Add valid usage statement to slink:VkPipelineLayoutCreateInfo disallowing multiple push constant ranges for the same shader stage (public issue 340). * Clarify the elink:VkSharingMode description of what executing the "same" barriers means in case of ownership transfer (public issue 347). * Rename copyright.txt and add COPYING.md to try and reduce confusion about applicable copyrights (public issue 350). * Extend the table in the <<boilerplate-wsi-header, Window System-Specific Header Control>> section to describe the external headers included when each etext:VK_USE_PLATFORM_* macro is defined (public issue 376). Internal Issues: * Add "Revision History" to the PDF outputs following the table of contents, to match HTML outputs (internal issue 43). * Clarified that flink:vkMapMemory may fail due to virtual address space limitations (internal issue 346). * Add +refBody+ comment markup for ref page autoextraction when required (internal issue 400). * Document proper use of "mipmap" and "mip" in the style guide API naming rules, matching the spelling rules (internal issue 471). * Tweak the <<extensions,Layers and Extensions>> appendix to note that the Specification may be built with arbitrary combinations of extensions (internal issue 483). * Remove incorrect statement allowing slink:VkClearAttachment::pname:colorAttachment to be >= slink:VkSubpassDescription::pname:colorAttachmentCount (internal issue 488). * The <<features-limits-viewportboundsrange,viewportBoundsRange>> is expressed in terms of the pname:maxViewportDimensions but this is actually two values. Clarify that it's based on the larger of the two (if they differ) (internal issue 499). Other Issues: * Reflowed text of the entire spec using the 'reflow' Makefile gater, to (hopefully) reduce future internal git churn as edits are made and extensions added in return for one-time pain. This has no perceptible change on the spec outputs but considerable changes on the asciidoc source (internal issue 367).
2016-09-24 07:58:11 +00:00
Vulkan Working Group, _Vulkan 1.0.27 - A Specification_,
https://www.khronos.org/registry/vulkan/, 2016-09-16
Change log for July 15, 2016 Vulkan 1.0.21 spec update: * Bump API patch number and header version number to 21 for this update. Github Issues: * Clarify how <<features-supported-sample-counts,sample count queries>> relate to the limits in slink:VkPhysicalDeviceLimits. (public issue 185). * Clarify in the <<interfaces-iointerfaces,Shader Input and Output Interfaces>> section that shader output variables have undefined values until the shader writes to them (public issue 240). * Specify the implicit value of image parameters that cannot be set in slink:VkSwapchainCreateInfo::pname:flags, pname:imageType, pname:mipLevels, pname:samples, pname:tiling, and pname:initialLayout (public issue 243). * Make use of code:NULL and code:VK_NULL_HANDLE consistent in the VK_KHR_swapchain extension (public issue 276). Internal Issues: * Clarify that presenting an image to a display surface swapchain applies the display surface's mode, and that destroying a display surface swapchain may reset the display's mode, in the VK_KHR_display_swapchain extension (internal issue 247). * Better describe what a slink:VkSurfaceKHR is, and that creating one does not set a mode, in the VK_KHR_display extension. This is a round-about way of pointing out that mode setting is not covered by the extension, but rather is performed as a side effect of presentation (internal issue 247). * Add more valid usage statements to flink:vkQueuePresentKHR command when the VK_KHR_display_swapchain extension is present (internal issue 247). * Add more includes to the VK_KHR_swapchain extension to better document interactions with VK_KHR_display_swapchain (internal issue 247). * Clarify restrictions on location aliasing in the <<fxvertex,Fixed-Function Vertex Processing>> section (internal issue 370). * Add mathematical description of blitting to flink:vkCmdBlitImage, and link it to the <<textures,Image Operations>> chapter. Use mathematical notation for ranges of texel coordinates in the <<textures,Image Operations>> chapter. Fixed miscellaneous validity statements for flink:vkCmdBlit and slink:VkImageBlit (internal issue 382). Other Commits: * Added a valid usage rule to flink:VkGraphicsPipelineCreateInfo that the ename:VK_PRIMITIVE_TOPOLOGY_PATCH_LIST topology must only be used when tessellation shaders are used. * Expand the style guide into a formal "Procedures and Conventions" document. Add a API Naming Conventions section, move most of the API Specification Appendix C (Layers and Extensions) content into the new document, and define the resulting procedures as mandatory (where relevant). This more clearly separates use vs. specification of Vulkan APIs. * Update vk_platform.h to handle 32-bit ARMv8 binaries. * Various minor cleanups to the Makefile and build process.
2016-07-16 02:05:43 +00:00
Change log for September 23, 2016 Vulkan 1.0.28 spec update: * Bump API patch number and header version number to 28 for this update. Github Issues: * Minor spelling and typography cleanup, add definitions of ename:VK_FALSE and ename:VK_TRUE as just what their names say (public issues 220, 318, 325, 365; internal issues 451, 496) * Clarify that the pname:maxDescriptorSet limits in the <<features-limits-required,Required Limits>> table are n * maxPerStage limit (where n=number of supported stages) (public issue 254). * Minor cleanup to <<boilerplate-platform-macros,Platform-Specific Macro Definitions>> appendix (public issue 314). * Add valid usage statement to slink:VkPipelineLayoutCreateInfo disallowing multiple push constant ranges for the same shader stage (public issue 340). * Clarify the elink:VkSharingMode description of what executing the "same" barriers means in case of ownership transfer (public issue 347). * Rename copyright.txt and add COPYING.md to try and reduce confusion about applicable copyrights (public issue 350). * Extend the table in the <<boilerplate-wsi-header, Window System-Specific Header Control>> section to describe the external headers included when each etext:VK_USE_PLATFORM_* macro is defined (public issue 376). Internal Issues: * Add "Revision History" to the PDF outputs following the table of contents, to match HTML outputs (internal issue 43). * Clarified that flink:vkMapMemory may fail due to virtual address space limitations (internal issue 346). * Add +refBody+ comment markup for ref page autoextraction when required (internal issue 400). * Document proper use of "mipmap" and "mip" in the style guide API naming rules, matching the spelling rules (internal issue 471). * Tweak the <<extensions,Layers and Extensions>> appendix to note that the Specification may be built with arbitrary combinations of extensions (internal issue 483). * Remove incorrect statement allowing slink:VkClearAttachment::pname:colorAttachment to be >= slink:VkSubpassDescription::pname:colorAttachmentCount (internal issue 488). * The <<features-limits-viewportboundsrange,viewportBoundsRange>> is expressed in terms of the pname:maxViewportDimensions but this is actually two values. Clarify that it's based on the larger of the two (if they differ) (internal issue 499). Other Issues: * Reflowed text of the entire spec using the 'reflow' Makefile gater, to (hopefully) reduce future internal git churn as edits are made and extensions added in return for one-time pain. This has no perceptible change on the spec outputs but considerable changes on the asciidoc source (internal issue 367).
2016-09-24 07:58:11 +00:00
Version 1.0.27 is the latest patch release of the Vulkan API Specification
as of the time this reference was created, but that Specification is
frequently updated with minor bugfixes and clarifications.
When a more recent patch release is made, it becomes the normative reference
for the API.
Change log for July 15, 2016 Vulkan 1.0.21 spec update: * Bump API patch number and header version number to 21 for this update. Github Issues: * Clarify how <<features-supported-sample-counts,sample count queries>> relate to the limits in slink:VkPhysicalDeviceLimits. (public issue 185). * Clarify in the <<interfaces-iointerfaces,Shader Input and Output Interfaces>> section that shader output variables have undefined values until the shader writes to them (public issue 240). * Specify the implicit value of image parameters that cannot be set in slink:VkSwapchainCreateInfo::pname:flags, pname:imageType, pname:mipLevels, pname:samples, pname:tiling, and pname:initialLayout (public issue 243). * Make use of code:NULL and code:VK_NULL_HANDLE consistent in the VK_KHR_swapchain extension (public issue 276). Internal Issues: * Clarify that presenting an image to a display surface swapchain applies the display surface's mode, and that destroying a display surface swapchain may reset the display's mode, in the VK_KHR_display_swapchain extension (internal issue 247). * Better describe what a slink:VkSurfaceKHR is, and that creating one does not set a mode, in the VK_KHR_display extension. This is a round-about way of pointing out that mode setting is not covered by the extension, but rather is performed as a side effect of presentation (internal issue 247). * Add more valid usage statements to flink:vkQueuePresentKHR command when the VK_KHR_display_swapchain extension is present (internal issue 247). * Add more includes to the VK_KHR_swapchain extension to better document interactions with VK_KHR_display_swapchain (internal issue 247). * Clarify restrictions on location aliasing in the <<fxvertex,Fixed-Function Vertex Processing>> section (internal issue 370). * Add mathematical description of blitting to flink:vkCmdBlitImage, and link it to the <<textures,Image Operations>> chapter. Use mathematical notation for ranges of texel coordinates in the <<textures,Image Operations>> chapter. Fixed miscellaneous validity statements for flink:vkCmdBlit and slink:VkImageBlit (internal issue 382). Other Commits: * Added a valid usage rule to flink:VkGraphicsPipelineCreateInfo that the ename:VK_PRIMITIVE_TOPOLOGY_PATCH_LIST topology must only be used when tessellation shaders are used. * Expand the style guide into a formal "Procedures and Conventions" document. Add a API Naming Conventions section, move most of the API Specification Appendix C (Layers and Extensions) content into the new document, and define the resulting procedures as mandatory (where relevant). This more clearly separates use vs. specification of Vulkan APIs. * Update vk_platform.h to handle 32-bit ARMv8 binaries. * Various minor cleanups to the Makefile and build process.
2016-07-16 02:05:43 +00:00
// Chapters of the text are included below
include::style/naming.txt[]
include::style/extensions.txt[]
include::style/markup.txt[]
include::style/writing.txt[]
= Still To Be Done
* Something about Image formats
* Something about validation scripts
* Something about pictures
* Glossary lists
* New param/enum macros
Change log for May 12, 2017 Vulkan 1.0.49 spec update: * Bump API patch number and header version number to 49 for this update. Github Issues: * Modify reference page extraction script to make internal links to spec anchors refer to the core specification instead of being dangling links (public issue 455). * Fix GL_KHR_vulkan_glsl typo and add a nor-normative mapping to the newly published StorageBuffer class (public issue 466). * Both flink:vkEnumerateInstanceExtensionProperties and flink:vkEnumerateDeviceExtensionProperties return ename:VK_ERROR_LAYER_NOT_PRESENT, which covers the error case of an application providing a layer name that wasn't returned by ftext:vkEnumerate{Instance|Device}LayerProperties (public issue 487). * The specification for flink:VkApplicationInfo::apiVersion says that the driver must return ename:VK_ERROR_INCOMPATIBLE_DRIVER in the case that pname:apiVersion specifies a non-supported version. That means that the valid usage should not also state that, and so the VU statement is removed. The VU had language about "`an effective substitute`" that would have been lost, and so it was moved to the pname:apiVersion description (public issue 488). Internal Issues: * Modify implicit validity generator script to assign asciidoc anchors to all valid usage statements it generates, and reflow.py script to insert Valid Usage ID (VUID) tags into the specification source files for explicit valid usage statements. This has no semantic effects on the specification, but will support the validation layer's detection of valid usage violations and allow it to link into the corresponding part of the specification (internal issue 583). * Assign VUID tags to all explicit VU statements and document the process and tag format in the style guide (internal issue 583). * Clarify the rules of whether to structure new functionality as instance extensions, device extensions, or both in the <<extended-functionality-instance-extensions-and-devices, Instance Extensions and Device Extensions>> section (internal issue 749). * Require that SPIR-V run-time arrays are only used with the code:BufferBlock decoration (internal issue 750). * Fix implicit and explicit valid usage statements for slink:VkWriteDescriptorSet::pname:dstSet (internal issue 767) * Fix SPIR-V code sample for ename:VK_DESCRIPTOR_TYPE_UNIFORM_TEXEL_BUFFER in the <<descriptorsets-uniformtexelbuffer, Uniform Texel Buffer>> section (internal issue 770). * Clarify that disabling depth testing also disables depth writes in the <<fragops-ds-state, Depth and Stencil Operations>> section (internal issue 775). * flink:VkDescriptorImageInfo::pname:imageLayout must match the actual imageLayout at the time the image is accessed. This was in the spec text, but needed an associated valid usage statement. * Note that only 32-bit atomic operations are supported in the <<spirvenv-module-validation, Validation Rules within a Module>> section. * Note that code:UniformConstant variables must not have initializers in the <<spirvenv-module-validation, Validation Rules within a Module>> section. * Add a new elink:VkObjectType enumeration to the core API, promoted from elink:VkDebugObjectTypeEXT, since it is used for much more than just the debug_report extension. New Extensions: * `VK_KHR_get_surface_capabilities2` * `VK_KHR_shared_presentable_image`
2017-05-12 08:37:16 +00:00
// Appendices are included below
include::style/vuid.txt[]
Change log for July 15, 2016 Vulkan 1.0.21 spec update: * Bump API patch number and header version number to 21 for this update. Github Issues: * Clarify how <<features-supported-sample-counts,sample count queries>> relate to the limits in slink:VkPhysicalDeviceLimits. (public issue 185). * Clarify in the <<interfaces-iointerfaces,Shader Input and Output Interfaces>> section that shader output variables have undefined values until the shader writes to them (public issue 240). * Specify the implicit value of image parameters that cannot be set in slink:VkSwapchainCreateInfo::pname:flags, pname:imageType, pname:mipLevels, pname:samples, pname:tiling, and pname:initialLayout (public issue 243). * Make use of code:NULL and code:VK_NULL_HANDLE consistent in the VK_KHR_swapchain extension (public issue 276). Internal Issues: * Clarify that presenting an image to a display surface swapchain applies the display surface's mode, and that destroying a display surface swapchain may reset the display's mode, in the VK_KHR_display_swapchain extension (internal issue 247). * Better describe what a slink:VkSurfaceKHR is, and that creating one does not set a mode, in the VK_KHR_display extension. This is a round-about way of pointing out that mode setting is not covered by the extension, but rather is performed as a side effect of presentation (internal issue 247). * Add more valid usage statements to flink:vkQueuePresentKHR command when the VK_KHR_display_swapchain extension is present (internal issue 247). * Add more includes to the VK_KHR_swapchain extension to better document interactions with VK_KHR_display_swapchain (internal issue 247). * Clarify restrictions on location aliasing in the <<fxvertex,Fixed-Function Vertex Processing>> section (internal issue 370). * Add mathematical description of blitting to flink:vkCmdBlitImage, and link it to the <<textures,Image Operations>> chapter. Use mathematical notation for ranges of texel coordinates in the <<textures,Image Operations>> chapter. Fixed miscellaneous validity statements for flink:vkCmdBlit and slink:VkImageBlit (internal issue 382). Other Commits: * Added a valid usage rule to flink:VkGraphicsPipelineCreateInfo that the ename:VK_PRIMITIVE_TOPOLOGY_PATCH_LIST topology must only be used when tessellation shaders are used. * Expand the style guide into a formal "Procedures and Conventions" document. Add a API Naming Conventions section, move most of the API Specification Appendix C (Layers and Extensions) content into the new document, and define the resulting procedures as mandatory (where relevant). This more clearly separates use vs. specification of Vulkan APIs. * Update vk_platform.h to handle 32-bit ARMv8 binaries. * Various minor cleanups to the Makefile and build process.
2016-07-16 02:05:43 +00:00
= Revision History
Change log for October 6, 2017 Vulkan 1.0.62 spec update: * Bump API patch number and header version number to 62 for this update. Github Issues: * Move asciidoc conditionals for `VK_KHR_maintenance1` in slink:VkDescriptorSetAllocateInfo so valid usage statements for `VK_KHR_push_descriptor` aren't accidentally removed when the first extension isn't enabled (public issue 573). * Fixed errors in API example code for flink:vkUpdateDescriptorSetWithTemplateKHR and flink:vkCmdPushDescriptorSetWithTemplateKHR (public issue 577). Internal Issues: * Specify constraints on concurrent access to fences that share payload in the <<synchronization-fences-importing, Importing Fence Payloads>> and <<synchronization-semaphores-waiting-state, Semaphore State Requirements For Wait Operations>> sections (internal issue 820). * Define the term "`retired swapchain`", reorganize some swapchain language, and improve language for pname:oldSwapchain in flink:VkSwapchainCreateInfoKHR, the <<swapchain-wsi-image-create-info>> table, flink:vkDestroySwapchainKHR, and flink:vkAcquireNextImage2KHX (internal issue 869). * Describe in the <<writing-arrays, Describing Properties of Array Elements>> section of the style guide how and when to use "`each`" and "`any`" to refer to properties of array elements, and make those uses in the specification consistent (internal issue 884). * Clarified that events cannot be used for cross-queue synchronization in the <<synchronization-events, Events>> section and for flink:vkCmdWaitEvents (internal issue 970). * Add success and error codes to +vk.xml+ for flink:vkCreateValidationCacheEXT (internal issue 995). * Clarify aspect mask usage for image memory barriers of multi-plane images in slink:VkImageSubresourceRange, slink:VkImageMemoryBarrier, and the <<textures-layout-validation, Layout Validation>> section (internal issue 996). Other Issues: * Fixed typo in flink:VkRenderPassSampleLocationsBeginInfoEXT (renamed field pname:pSubpassSampleLocations to pname:pPostSubpassSampleLocations). * Add missing buffer usage requirements for indirect draws in flink:vkCmdDrawIndirect, flink:vkCmdDrawIndirectCountAMD, flink:vkCmdDrawIndexedIndirect, and flink:vlCmdDrawIndexedIndirectCountAMD. * Modify Makefile to allow specification to build in git "`detached HEAD`" state. * Update valid usage ID generation script to allow recursively operating on all `.txt` files in a specified directory, and move the `startVUID` tracking information into a separate python file that is automatically updated by the script. New Extensions: * Add +vk.xml+ entries for pending `VK_ANDROID_native_buffer` extension (note, this extension is not yet enabled). * `VK_AMD_shader_image_load_store_lod`
2017-10-07 04:51:59 +00:00
* 2017-09-10 - Add descriptions of <<writing-arrays, how to use `each` and
`any`>> to refer to properties of elments of arrays (internal issue 884).
Change log for September 15, 2017 Vulkan 1.0.61 spec update: * Bump API patch number and header version number to 61 for this update. Github Issues: * Provide alternate length attributes (altlen=) in the XML schema, for those using length attributes to generate code instead of documentation (public issue 555). * Fix erroneous references to `latex:` being used for asciidoc math markup, rather than `latexmath:` (public pull request 556). * Add author ID to XML for Kazan software renderer (public pull request 557). Internal Issues: * Add the <<fundamentals-abi,Application Binary Interface>> section describing platform ABI requirements and recommendations, add examples of function and function pointer declarations to the <<boilerplate-platform-specific-calling-conventions, Platform-Specific Calling Conventions>> section, and remove related language that existed elsewhere in the specification (internal issue 64). * Describe where to document valid usage interactions of chained structures in the style guide, and fix one case now appearing in slink:VkBufferCreateInfo instead of the child slink:VkDedicatedAllocationBufferCreateInfoNV structure (internal issue 715). * Add example to the style guide of describing enumerated types which are empty when the spec is built without relevant extensions enabled, and apply it to existing examples for elink:VkDescriptorSetLayoutCreateFlagBits and elink:VkSubpassDescriptionFlagBits (internal issue 864). * Add a note to the <<fundamentals-validusage-enums, Valid Usage for Enumerated Types>> section that the special values suffixed with etext:_BEGIN_RANGE, etext:_END_RANGE, etext:_RANGE_SIZE and etext:_MAX_ENUM are not part of the API and should: not be used by applications (internal issue 872). * Added note to flink:vkCmdUpdateBuffers explaining the performance penalty for copies done in this way, and why the upper copy limit is what it is (internal issue 952). * Update `VK_KHX_device_group` to split some functionality into the new `VK_KHR_bind_memory2` extension, and rename that functionality (internal issue 969). * Remove *Status* fields from extension appendices, since they are by definition published and complete by the time they reach the public github repository (internal issue 973). Other Issues: * Update Data Format specification dependency to version 1.2 and change references to DF sections accordingly. * Update XML to make the pname:pAllocator parameter of flink:vkRegisterDeviceEventEXT and flink:vkRegisterDisplayEventEXT in the `VK_EXT_display_control` extension as optional. New Extensions: * `VK_KHR_bind_memory2` * `VK_KHR_image_format_list` * `VK_KHR_maintenance2` * `VK_KHR_sampler_ycbcr_conversion`
2017-09-15 05:41:33 +00:00
* 2017-09-10 - Add <<extensions-interactions-parent, Valid Usage and
Extension pname:pNext Chains>> language specifying where to describe
interactions of structures in a pname:pNext chain (internal issue 715).
* 2017-09-10 - Add example of marking up an enumerated type all of whose
values are defined by extensions (internal issue 864).
Change log for June 24, 2017 Vulkan 1.0.53 spec update: * Bump API patch number and header version number to 53 for this update. Github Issues: Internal Issues: * Clarify mappings of coordinates for mutable, compatible image views in slink:VkImageViewCreateInfo (internal issue 815). * Make ename:VK_BIND_SFR_BIT require a logical device with multiple physical devices, so that standard sparse image block dimensions are only required on systems that support multi-GPU (internal issue 835). * Convert all files from use of // refBegin .. // refEnd comments to delimit ref pages, to use of open blocks, and update style guide accordingly (internal issue 839). * Add valid usage for slink:VkWriteDescriptorSet when performing updates to a ename:VK_STORAGE_IMAGE descriptor with layout ename:VK_IMAGE_LAYOUT_GENERAL. * Add a hack to the validity generator script to support an odd interaction between flink:vkCmdFillBuffer and an extension (internal issue 853). * Remove redundant text describing slink:VkBufferCreateInfo::pname:usage, which was already covered by implicit valid usage (internal issue 854). * Update implicit validity generator script to properly handle the pname:sType and pname:pNext members of "returnedonly" structures (internal issue 874). * Note that slink:VkApplicationInfo::pname:pApplicationName & slink:VkApplicationInfo::pname:pEngineName are optional, and add missing implicit valid usage statements for flink:vkDestroyInstance. * Added missing valid usage for flink:vkCmdWriteTimestamp to require a timestamp query pool. * Simplify and/or split "`non-atomic`" valid usage statements. New Extensions: * `VK_AMD_gpu_shader_int16` * `VK_EXT_blend_operation_advanced` * `VK_EXT_sampler_filter_minmax` * `VK_NV_framebuffer_mixed_samples` ----------------------------------------------------- Note: the 1.0.52 spec wasn't published on github, so the 1.0.53 release combines both change sets. ----------------------------------------------------- Change log for June 13, 2017 Vulkan 1.0.52 spec update: * Bump API patch number and header version number to 52 for this update. Github Issues: Internal Issues: * Clarify behavior when non-coherent memory has <<memory-device-unmap-does-not-flush, not been flushed before being unmapped>> (internal issue 819). * Fix description of code:WorkgroupSize builtin to note it decorates an object, not a variable (internal issue 836). * Fix asciidoc attributes so that trailing '{plus}' symbols in [eq] style equations are rendered properly (internal issue 845). * Add language to the "`Extension Handles, Objects, Enums, and Typedefs`" section of the Procedures and Conventions document stating that any new handle type requires a corresponding entry in the elink:VkObjectType enumerated type (internal issue 856). * Update style guide to use slink macro for Vulkan handle type names, and define narrow conditions under which to use the *name and *text macros instead of *link (internal issue 886). * Add a dependency of the <<VK_KHX_device_group,VK_KHX_device_group>> extension on VK_KHX_device_group_creation to +vk.xml+ and the extension appendix. * Change the copyright on Vulkan specification asciidoc *source* files to CC-BY 4.0, and update the proprietary Khronos copyright applied to the generated *output* formats (internal issue 327). This enables broader re-use and modification of the Vulkan specification sources, while not affecting the Reciprocal IP License between Vulkan Adopters and Working Group Members. New Extensions: * `VK_NV_fill_rectangle` * `VK_NV_fragment_coverage_to_color`
2017-06-27 02:32:10 +00:00
* 2017-06-12 - Add sections describing when to use the
<<markup-macros-api-name, *name{cl}>> and <<markup-macros-api-text,
*text{cl}>> markup macros instead of the *link{cl} macros, and clarify
that slink{cl} should be used for handle as well as structure names
(internal issue 886).
Change log for May 12, 2017 Vulkan 1.0.49 spec update: * Bump API patch number and header version number to 49 for this update. Github Issues: * Modify reference page extraction script to make internal links to spec anchors refer to the core specification instead of being dangling links (public issue 455). * Fix GL_KHR_vulkan_glsl typo and add a nor-normative mapping to the newly published StorageBuffer class (public issue 466). * Both flink:vkEnumerateInstanceExtensionProperties and flink:vkEnumerateDeviceExtensionProperties return ename:VK_ERROR_LAYER_NOT_PRESENT, which covers the error case of an application providing a layer name that wasn't returned by ftext:vkEnumerate{Instance|Device}LayerProperties (public issue 487). * The specification for flink:VkApplicationInfo::apiVersion says that the driver must return ename:VK_ERROR_INCOMPATIBLE_DRIVER in the case that pname:apiVersion specifies a non-supported version. That means that the valid usage should not also state that, and so the VU statement is removed. The VU had language about "`an effective substitute`" that would have been lost, and so it was moved to the pname:apiVersion description (public issue 488). Internal Issues: * Modify implicit validity generator script to assign asciidoc anchors to all valid usage statements it generates, and reflow.py script to insert Valid Usage ID (VUID) tags into the specification source files for explicit valid usage statements. This has no semantic effects on the specification, but will support the validation layer's detection of valid usage violations and allow it to link into the corresponding part of the specification (internal issue 583). * Assign VUID tags to all explicit VU statements and document the process and tag format in the style guide (internal issue 583). * Clarify the rules of whether to structure new functionality as instance extensions, device extensions, or both in the <<extended-functionality-instance-extensions-and-devices, Instance Extensions and Device Extensions>> section (internal issue 749). * Require that SPIR-V run-time arrays are only used with the code:BufferBlock decoration (internal issue 750). * Fix implicit and explicit valid usage statements for slink:VkWriteDescriptorSet::pname:dstSet (internal issue 767) * Fix SPIR-V code sample for ename:VK_DESCRIPTOR_TYPE_UNIFORM_TEXEL_BUFFER in the <<descriptorsets-uniformtexelbuffer, Uniform Texel Buffer>> section (internal issue 770). * Clarify that disabling depth testing also disables depth writes in the <<fragops-ds-state, Depth and Stencil Operations>> section (internal issue 775). * flink:VkDescriptorImageInfo::pname:imageLayout must match the actual imageLayout at the time the image is accessed. This was in the spec text, but needed an associated valid usage statement. * Note that only 32-bit atomic operations are supported in the <<spirvenv-module-validation, Validation Rules within a Module>> section. * Note that code:UniformConstant variables must not have initializers in the <<spirvenv-module-validation, Validation Rules within a Module>> section. * Add a new elink:VkObjectType enumeration to the core API, promoted from elink:VkDebugObjectTypeEXT, since it is used for much more than just the debug_report extension. New Extensions: * `VK_KHR_get_surface_capabilities2` * `VK_KHR_shared_presentable_image`
2017-05-12 08:37:16 +00:00
* 2017-05-08 - Add appendix describing <<appendix-vuid, Valid Usage ID
Tags>> and how they're generated.
2017-03-25 08:46:58 +00:00
* 2017-03-19 - Add naming rule for <<naming-extension-structures, Extension
Structure Names>>.
Change log for February 17, 2017 Vulkan 1.0.41 spec update: * Bump API patch number and header version number to 41 for this update. Github Issues: * Made all uses of `NULL` vs. code:VK_NULL_HANDLE consistent (public issue 276). * Clarify render pass compatibility in different usage scenarios (public issues 303 and 304). * Add valid usage statements to slink:VkFramebufferCreateInfo requiring that the width, height, and number of layers of the framebuffer all be nonzero (public issue 432). * Allow `offset` and `align` in any GLSL version for the `GL_KHR_vulkan_glsl` extension (public issue 435). * Specify lifetime of string objects passed to the tlink:PFN_vkDebugReportCallbackEXT user callback in the +VK_EXT_debug_report+ extension (public issue 446). * Fix inter-page links in multi-file reference pages (public issue 454). Internal Issues: * Update valid usage language for slink:VkImageCreateInfo to disallow creating images that have ename:VK_IMAGE_USAGE_TRANSIENT_ATTACHMENT_BIT set without other attachment usage bits (ename:VK_IMAGE_USAGE_INPUT_ATTACHMENT_BIT, ename:VK_IMAGE_USAGE_COLOR_ATTACHMENT_BIT, or ename:VK_IMAGE_USAGE_DEPTH_STENCIL_ATTACHMENT_BIT) (internal issue 540). * Disable `VK_EXT_swapchain_colorspace` extension until internal issues 640 and 661 are mutually resolved. * Allow alternative mipmap level selection when [eq]#lambda == 0.5# during texture <<textures-image-level-selection,Image Level(s) Selection>> (internal issue 680). Other Issues: * Add a clarification to the style guide that the extension revision number is treated as a patch number, so that changes to published extensions should only include bug fixes and spec clarifications.
2017-02-17 11:57:46 +00:00
* 2017-02-11 - Finish transitioning to asciidoctor markup.
Change log for September 30, 2016 Vulkan 1.0.29 spec update: * Bump API patch number and header version number to 29 for this update. Github Issues: * Remove redundant constraint on slink:VkCommandBufferInheritanceInfo::pname:queryFlags (public issue 224). * Fix typo and remove link in Note in the <<extended-functionality-instance-extensions-and-devices, Instance Extensions and Device Extensions>> section (public issue 359). * Fix erroneous validation statement for the pname:layout member of slink:VkComputePipelineCreateInfo (public issue 362). Internal Issues: * Restore long figure captions using asciidoc sidebar blocks, due to restrictions of asciidoc syntax (internal issue 101). * Replace most latexmath equations with comparable markup in straight asciidoc, which significantly improves time required to fully load and process the HTML forms of the Specification. There are known minor font and alignment inconsistencies with MathJax and PDF rendering of latexmath equations. Please do not file github issues about these. We are aware of the inconsistencies and will make refinements over time, while the performance improvements are compelling in at least some major browsers (internal issue 313). * Move handcoded validity statements from +vk.xml+ into the Specification body, easing work in the single-branch model. Specify the distinction between these explicit statements, and the implicit validity statements inferred from vk.xml. Validity statements now appear in two blocks for each command and structure - handcoded "Valid Usage" and the implicit "Valid Usage (Implicit)" (internal issue 392). * Add the +returnedonly="false"+ attribute to WSI output structures, removing incorrectly generated implicit validity statements for slink:VkDisplayPropertiesKHR, slink:VkDisplayPlanePropertiesKHR, slink:VkDisplayModePropertiesKHR, slink:VkDisplayPlaneCapabilitiesKHR, slink:VkSurfaceCapabilitiesKHR, and slink:VkSurfaceFormatKHR structures (internal issue 486). * Update slink:VkImageLayout to require the ename:VK_IMAGE_USAGE_SAMPLED_BIT be set for sampled depth/stencil images (internal issue 487). * Use an explicit format specifier string for the date command invocation in the +Makefile+ instead of the shorthand -R option, which doesn't work on BSD and MaxOS X date commands (internal issue 500). Other Issues: * Use the terms ``allocation scope'' and ``extension scope'' instead of just ``scope'', and add them to the glossary.
2016-10-01 04:13:37 +00:00
* 2016-09-28 - Add asciidoc math markup guidelines.
Change log for September 16, 2016 Vulkan 1.0.27 spec update: * Bump API patch number and header version number to 27 for this update. Github Issues: * Weaken flink:vkGetPipelineCacheData invariance conditions; previous conditions were stronger than agreed and can't be guaranteed (public issue 280). * Add link to "Vulkan Loader Specification and Architecture Overview" document to Normative References section (public issue 359). Internal Issues: * Be more clear in the <<interfaces-resources-layout-std140, uniform buffer layout>> section that block offsets can be out of order (internal issue 396). * Document that extension authors should add support for their extensions to the validation layers (internal issue 398). * Clarify that the valid range of depth clear values should be limited to the 0..1 range and that copies to depth aspect must also be in this range (internal issue 412). * Specify ``a'' vs. ``an'' use in the style guide (internal issue 432). * Increase the maximum pname:nonCoherentAtomSize value in the <<features-limits-required,Required Limits>> section from 128 to 256 (internal issue 435). * Fix vk_platform.h for compiler errors on some Android platforms (internal issue 441). * Clarify that slink:VkPhysicalDeviceFeatures::pname:pEnabledFeatures == `NULL` disables all features, including the "required" feature pname:robustBufferAccess (internal issue 479). Other Issues: * Expand style guide and make it more self-consistent. * Use ISO 8601 date format everywhere. * Emphasise the correct way of using slink:VkSurfaceCapabilitiesKHR::pname:maxImageCount. * Added +VK_EXT_validation_flags+ extension for validation flag mechanism. * Fix an <<credits,author credit>> to include their current employer.
2016-09-17 04:22:17 +00:00
* 2016-09-16 - Make style guide markup more consistent with its own
Change log for September 23, 2016 Vulkan 1.0.28 spec update: * Bump API patch number and header version number to 28 for this update. Github Issues: * Minor spelling and typography cleanup, add definitions of ename:VK_FALSE and ename:VK_TRUE as just what their names say (public issues 220, 318, 325, 365; internal issues 451, 496) * Clarify that the pname:maxDescriptorSet limits in the <<features-limits-required,Required Limits>> table are n * maxPerStage limit (where n=number of supported stages) (public issue 254). * Minor cleanup to <<boilerplate-platform-macros,Platform-Specific Macro Definitions>> appendix (public issue 314). * Add valid usage statement to slink:VkPipelineLayoutCreateInfo disallowing multiple push constant ranges for the same shader stage (public issue 340). * Clarify the elink:VkSharingMode description of what executing the "same" barriers means in case of ownership transfer (public issue 347). * Rename copyright.txt and add COPYING.md to try and reduce confusion about applicable copyrights (public issue 350). * Extend the table in the <<boilerplate-wsi-header, Window System-Specific Header Control>> section to describe the external headers included when each etext:VK_USE_PLATFORM_* macro is defined (public issue 376). Internal Issues: * Add "Revision History" to the PDF outputs following the table of contents, to match HTML outputs (internal issue 43). * Clarified that flink:vkMapMemory may fail due to virtual address space limitations (internal issue 346). * Add +refBody+ comment markup for ref page autoextraction when required (internal issue 400). * Document proper use of "mipmap" and "mip" in the style guide API naming rules, matching the spelling rules (internal issue 471). * Tweak the <<extensions,Layers and Extensions>> appendix to note that the Specification may be built with arbitrary combinations of extensions (internal issue 483). * Remove incorrect statement allowing slink:VkClearAttachment::pname:colorAttachment to be >= slink:VkSubpassDescription::pname:colorAttachmentCount (internal issue 488). * The <<features-limits-viewportboundsrange,viewportBoundsRange>> is expressed in terms of the pname:maxViewportDimensions but this is actually two values. Clarify that it's based on the larger of the two (if they differ) (internal issue 499). Other Issues: * Reflowed text of the entire spec using the 'reflow' Makefile gater, to (hopefully) reduce future internal git churn as edits are made and extensions added in return for one-time pain. This has no perceptible change on the spec outputs but considerable changes on the asciidoc source (internal issue 367).
2016-09-24 07:58:11 +00:00
recommendations.
Simplify some tables of preferred terms.
Add sections on block and table markup.
* 2016-09-12 - Describe writing and markup style for labelled lists.
Require use of the ISO 8601 date format except in rare legacy cases.
Expand the description of <<markup-layout,Line Lengths>> and add a
description of markup for <<markup-footnotes,Footnotes>>.
Change log for September 16, 2016 Vulkan 1.0.27 spec update: * Bump API patch number and header version number to 27 for this update. Github Issues: * Weaken flink:vkGetPipelineCacheData invariance conditions; previous conditions were stronger than agreed and can't be guaranteed (public issue 280). * Add link to "Vulkan Loader Specification and Architecture Overview" document to Normative References section (public issue 359). Internal Issues: * Be more clear in the <<interfaces-resources-layout-std140, uniform buffer layout>> section that block offsets can be out of order (internal issue 396). * Document that extension authors should add support for their extensions to the validation layers (internal issue 398). * Clarify that the valid range of depth clear values should be limited to the 0..1 range and that copies to depth aspect must also be in this range (internal issue 412). * Specify ``a'' vs. ``an'' use in the style guide (internal issue 432). * Increase the maximum pname:nonCoherentAtomSize value in the <<features-limits-required,Required Limits>> section from 128 to 256 (internal issue 435). * Fix vk_platform.h for compiler errors on some Android platforms (internal issue 441). * Clarify that slink:VkPhysicalDeviceFeatures::pname:pEnabledFeatures == `NULL` disables all features, including the "required" feature pname:robustBufferAccess (internal issue 479). Other Issues: * Expand style guide and make it more self-consistent. * Use ISO 8601 date format everywhere. * Emphasise the correct way of using slink:VkSurfaceCapabilitiesKHR::pname:maxImageCount. * Added +VK_EXT_validation_flags+ extension for validation flag mechanism. * Fix an <<credits,author credit>> to include their current employer.
2016-09-17 04:22:17 +00:00
* 2016-09-08 - Add a writing section about proper use of
Change log for February 10, 2017 Vulkan 1.0.40 spec update: * Bump API patch number and header version number to 40 for this update. * There is a major build change in this release. We are now using the Ruby-based ``asciidoctor'' implementation, rather than the Python-based ``asciidoc'' implementation, to process the specification. While the actual specification markup changes were minimal, this requires a new set of build tools and a very different installation process, especially because we now use an experimental direct-to-PDF backend for Asciidoctor instead of Docbook->dblatex->PDF. It is no longer possible to build the Specification using asciidoc. See doc/specs/vulkan/README.adoc for some guidance on installing the new toolchain components. * There are some minor rendering issues in the PDF output due to teething problems with the asciidoctor toolchain, especially with mathematical equations. We are aware of these and working on them. Github Issues: * Updated sample code for the <<sparsememory-examples-basic,sparse resource binding example>> (public issue 97). * Modify line and point clipping behavior in the <<vertexpostproc-clipping, Primitive Clipping>> section to allow for pop-free behavior. The ability to check for which behavior is implemented may be added a future feature or extension (public issue 113). * Unify the discussions of implicit ordering throughout the spec, in particular in the new sections <<drawing-primitive-order, Primitive Order>>, <<primrast-order, Rasterization Order>>, and <<synchronization-implicit, Implicit Synchronization Guarantees>>; the discussion of <<synchronization-submission-order, submission order>>; and references elsewhere to these sections (public issue 133). * Clarify \<\<descriptorsets-compatibility,Pipeline Layout Compatibility>> language and introduce the term ``identically defined'' (public issue 164). * Add a dependency to the +VK_EXT_debug_marker+ extension that's needed to reuse the object type enum from +VK_EXT_debug_report+, and moves the definition of that enum into +VK_EXT_debug_report+ where it should be (public issue 409). * Remove redundant valid usage statement from slink:VkImageBlit (public issue 421). * Update GL_KHR_vulkan_glsl to allow the ternary operator to result in a specialization constant (public issue 424). * Fix valid usage for flink:VkPipelineShaderStageCreateInfo (public issue 426). * Correct typo in New Objects list for <<VK_EXT_debug_report>> (public issue 447). Internal Issues: * Moved to asciidoctor for spec builds (internal issue 121). * Update style guide to describe where to put new extensions-specific asciidoc files, and what to name them (internal issue 626). * Add src/spec/indexExt.py to autogenerate registry index entries linking into the 1.0-extensions specification, instead of maintaining the index manually. (internal issue 642). * Autogenerate extension dependencies and lists of all extensions and all KHR extensions from the "supported" attributes in +vk.xml+. Execute +make config/extDependency.sh+ from +doc/specs/vulkan+ when a supported extension is added to vk.xml, to regenerate the dependency script. The consequence is that specifying a single extension to the +makeExt+ script will automatically enable all extensions it depends on as well, and that the +makeAllExts+ and +makeKHR+ scripts do not need to be updated when a new extension is supported (internal issue 648). * Put extension appendices all at the same asciidoc section level, so KHR WSI extensions show up in the HTML index (internal issue 648). Other Issues: * Imbed images in the generated HTML specs instead of loading them from the images/ directory. * Fix missing EXT in extension name (ename:VK_EXT_SWAPCHAIN_COLOR_SPACE_EXTENSION_NAME). * Add new +VK_EXT_SMPTE_2086_metadata+ extension. * In the <<platformCreateSurface_xlib,Xlib Surface>> section of the +VK_KHR_xlib_surface+ specification, add language warning users that they always need to call code:XinitThreads. * Use the term "presentable image" (rather than "swapchain image") consistently in +VK_KHR_swapchain+ and related extensions, and add a glossary term defining it. * Relocate the valid usage for samples of flink:vkGetPhysicalDeviceSparseImageFormatProperties2KHR::pname:pFormatInfo to be below the flink:VkPhysicalDeviceSparseImageFormatInfo2KHR structure.
2017-02-11 04:37:39 +00:00
<<writing-misc-a-an,"`a`" and "`an`">> (internal issue 432).
Change log for September 23, 2016 Vulkan 1.0.28 spec update: * Bump API patch number and header version number to 28 for this update. Github Issues: * Minor spelling and typography cleanup, add definitions of ename:VK_FALSE and ename:VK_TRUE as just what their names say (public issues 220, 318, 325, 365; internal issues 451, 496) * Clarify that the pname:maxDescriptorSet limits in the <<features-limits-required,Required Limits>> table are n * maxPerStage limit (where n=number of supported stages) (public issue 254). * Minor cleanup to <<boilerplate-platform-macros,Platform-Specific Macro Definitions>> appendix (public issue 314). * Add valid usage statement to slink:VkPipelineLayoutCreateInfo disallowing multiple push constant ranges for the same shader stage (public issue 340). * Clarify the elink:VkSharingMode description of what executing the "same" barriers means in case of ownership transfer (public issue 347). * Rename copyright.txt and add COPYING.md to try and reduce confusion about applicable copyrights (public issue 350). * Extend the table in the <<boilerplate-wsi-header, Window System-Specific Header Control>> section to describe the external headers included when each etext:VK_USE_PLATFORM_* macro is defined (public issue 376). Internal Issues: * Add "Revision History" to the PDF outputs following the table of contents, to match HTML outputs (internal issue 43). * Clarified that flink:vkMapMemory may fail due to virtual address space limitations (internal issue 346). * Add +refBody+ comment markup for ref page autoextraction when required (internal issue 400). * Document proper use of "mipmap" and "mip" in the style guide API naming rules, matching the spelling rules (internal issue 471). * Tweak the <<extensions,Layers and Extensions>> appendix to note that the Specification may be built with arbitrary combinations of extensions (internal issue 483). * Remove incorrect statement allowing slink:VkClearAttachment::pname:colorAttachment to be >= slink:VkSubpassDescription::pname:colorAttachmentCount (internal issue 488). * The <<features-limits-viewportboundsrange,viewportBoundsRange>> is expressed in terms of the pname:maxViewportDimensions but this is actually two values. Clarify that it's based on the larger of the two (if they differ) (internal issue 499). Other Issues: * Reflowed text of the entire spec using the 'reflow' Makefile gater, to (hopefully) reduce future internal git churn as edits are made and extensions added in return for one-time pain. This has no perceptible change on the spec outputs but considerable changes on the asciidoc source (internal issue 367).
2016-09-24 07:58:11 +00:00
* 2016-08-30 - Remove mustnot{cl} and shouldnot{cl} macro definitions, which
are no longer used in the Specification (internal issue 407).
Change log for September 16, 2016 Vulkan 1.0.27 spec update: * Bump API patch number and header version number to 27 for this update. Github Issues: * Weaken flink:vkGetPipelineCacheData invariance conditions; previous conditions were stronger than agreed and can't be guaranteed (public issue 280). * Add link to "Vulkan Loader Specification and Architecture Overview" document to Normative References section (public issue 359). Internal Issues: * Be more clear in the <<interfaces-resources-layout-std140, uniform buffer layout>> section that block offsets can be out of order (internal issue 396). * Document that extension authors should add support for their extensions to the validation layers (internal issue 398). * Clarify that the valid range of depth clear values should be limited to the 0..1 range and that copies to depth aspect must also be in this range (internal issue 412). * Specify ``a'' vs. ``an'' use in the style guide (internal issue 432). * Increase the maximum pname:nonCoherentAtomSize value in the <<features-limits-required,Required Limits>> section from 128 to 256 (internal issue 435). * Fix vk_platform.h for compiler errors on some Android platforms (internal issue 441). * Clarify that slink:VkPhysicalDeviceFeatures::pname:pEnabledFeatures == `NULL` disables all features, including the "required" feature pname:robustBufferAccess (internal issue 479). Other Issues: * Expand style guide and make it more self-consistent. * Use ISO 8601 date format everywhere. * Emphasise the correct way of using slink:VkSurfaceCapabilitiesKHR::pname:maxImageCount. * Added +VK_EXT_validation_flags+ extension for validation flag mechanism. * Fix an <<credits,author credit>> to include their current employer.
2016-09-17 04:22:17 +00:00
* 2016-08-29 - Add spelling and compound word rules (public issue 352).
* 2016-08-23 - Modify description of specifying extensions in the
Change log for August 26, 2016 Vulkan 1.0.25 spec update: * Bump API patch number and header version number to 25 for this update. * Structurally change the specification so that multiple extensions are included in the +1.0+ git branch, and specifications will include or not include those extensions at build time based on options passed to the Makefile. See +doc/specs/vulkan/README.html+ and the ``Layers and Extensions'' section of the ``Vulkan Documentation and Extensions'' document for more information on this change. * Register and publish new extensions in the single-branch form: ** +VK_NV_external_memory_capabilities+ ** +VK_NV_external_memory+ ** +VK_NV_external_memory_win32+ ** +VK_NV_win32_keyed_mutex+ Github Issues: * Clarify description of GetInstanceProcAddr and GetDeviceProcAddr (public issue 212). * Add SPIR-V <<textures-operation-validation, instruction validation>> for single-sampled images (public issue 316). * Fix spelling of ``tesselation'' in a few places and note it as an exception to the American spelling rules convention (public issue 327). * Fix Makefile to create output directory for ``styleguide'' target (public issue 329). * Fix numerous minor issues with incorrectly tags on enumerant names and table titles (public issue 330). * Generate specversion.txt date in UTC time and RFC 2822 format (public issue 335). * Convert link to the SPIR-V Specification for flink:VkShaderModuleCreateInfo into an internal link to the normative reference (public issue 336). * Add ename:VK_ERROR_OUT_OF_MEMORY error code to flink:vkCreateDebugReportCallbackEXT (public issue 337). Internal Issues: * Update style guide regarding use of code:NULL and dname:VK_NULL_HANDLE (internal issue 393). * Change the definition of latexmath:[$q$] in the <<textures-image-level-selection,texture image level selection>> section to be the index of the maximum defined level for the view, not the number of levels in the view (internal issue 406). * Allow developers to override dname:VK_DEFINE_NON_DISPATCHABLE_HANDLE with their own binary-compatible definition (internal issue 439). * Fix +vk_platform.h+ conditional logic causing compile failure with some Android compilers (internal issue 441). * Implement the single-branch model as described above (internal issue 461). Other Issues:
2016-08-28 10:47:19 +00:00
<<extensions,Layers and Extensions>> chapter to refer to the new
single-branch model for extensions (internal issue 397).
Change log for September 16, 2016 Vulkan 1.0.27 spec update: * Bump API patch number and header version number to 27 for this update. Github Issues: * Weaken flink:vkGetPipelineCacheData invariance conditions; previous conditions were stronger than agreed and can't be guaranteed (public issue 280). * Add link to "Vulkan Loader Specification and Architecture Overview" document to Normative References section (public issue 359). Internal Issues: * Be more clear in the <<interfaces-resources-layout-std140, uniform buffer layout>> section that block offsets can be out of order (internal issue 396). * Document that extension authors should add support for their extensions to the validation layers (internal issue 398). * Clarify that the valid range of depth clear values should be limited to the 0..1 range and that copies to depth aspect must also be in this range (internal issue 412). * Specify ``a'' vs. ``an'' use in the style guide (internal issue 432). * Increase the maximum pname:nonCoherentAtomSize value in the <<features-limits-required,Required Limits>> section from 128 to 256 (internal issue 435). * Fix vk_platform.h for compiler errors on some Android platforms (internal issue 441). * Clarify that slink:VkPhysicalDeviceFeatures::pname:pEnabledFeatures == `NULL` disables all features, including the "required" feature pname:robustBufferAccess (internal issue 479). Other Issues: * Expand style guide and make it more self-consistent. * Use ISO 8601 date format everywhere. * Emphasise the correct way of using slink:VkSurfaceCapabilitiesKHR::pname:maxImageCount. * Added +VK_EXT_validation_flags+ extension for validation flag mechanism. * Fix an <<credits,author credit>> to include their current employer.
2016-09-17 04:22:17 +00:00
* 2016-07-26 - Add section describing <<writing-refpages,markup for
Change log for August 5, 2016 Vulkan 1.0.23 spec update: * Bump API patch number and header version number to 23 for this update. Github Issues: * Add explicit valid value attributes to pname:sType members in vk.xml (public issue 34). * Clarify usage of flink:vkGetInstanceProcAddr and flink:vkGetDeviceProcAddr (public issue 225). * Fix a copy-and-paste error in the description of pname:pSwapchainImageCount saying that it was the count of ``format pairs'' instead of ``swapchain images'' (public issue 292). * flink:vkCmdExecuteCommandBuffers requires all command buffers to be allocated from command pools created for the same queue family (public issue 296). * Remove bogus +optional+ attribute for flink:vkEnumerateDeviceLayerProperties::pname:physicalDevice from vk.xml (public issue 301). * Clean up the <<resources-image-views-compatibility,image and image view compatibility table>> reference and contents. Use full enumerant names. Refer to pname:layerCount in the ``view parameters'' column instead of pname:arrayLayers. Require N >= 1 for the cube array subview row, not just arrayLayers >= 6 N (public issue 304). * Modify description of <<resources-memory-aliasing,memory aliasing>> to be consistent with the description of <<resources-bufferimagegranularity,buffer image granularity>> (public issue 307). Internal Issues: * Describe remaining +vk_platform.h+ macros in the <<boilerplate,API Boilerplate>> appendix (internal issue 6). * Clarify <<features-features-robustBufferAccess,pname:robustBufferAccess>> feature behavior; what memory can be accessed, how bounds checking is performed, and allowing for vectorization (internal issue 332). * Document markup for automatic extraction of reference pages from the spec sources in the style guide (internal issue 395). * Allow flink:vkCreateDisplayModeKHR to return ename:VK_ERROR_INITIALIZAION_FAILED_KHR if the user requests mode parameters that the specified display does not support (internal issue 411). * Remove atomic counters (atomic_uint style) from KHR_vulkan_glsl, and more clearly remove the subroutine keyword alongside it (internal issue 421). * Clarify behavior of flink:vkCmdBindDescriptorSets for descriptor sets not contained in the layout (internal issue 427). Other Commits: * Change the order in which members of sname:VkAttachmentDescription and sname:VkPipelineInputAssemblyStateCreateInfo are described to match their order in the structures.
2016-08-05 12:11:02 +00:00
automatic reference page extraction>>.
Change log for September 16, 2016 Vulkan 1.0.27 spec update: * Bump API patch number and header version number to 27 for this update. Github Issues: * Weaken flink:vkGetPipelineCacheData invariance conditions; previous conditions were stronger than agreed and can't be guaranteed (public issue 280). * Add link to "Vulkan Loader Specification and Architecture Overview" document to Normative References section (public issue 359). Internal Issues: * Be more clear in the <<interfaces-resources-layout-std140, uniform buffer layout>> section that block offsets can be out of order (internal issue 396). * Document that extension authors should add support for their extensions to the validation layers (internal issue 398). * Clarify that the valid range of depth clear values should be limited to the 0..1 range and that copies to depth aspect must also be in this range (internal issue 412). * Specify ``a'' vs. ``an'' use in the style guide (internal issue 432). * Increase the maximum pname:nonCoherentAtomSize value in the <<features-limits-required,Required Limits>> section from 128 to 256 (internal issue 435). * Fix vk_platform.h for compiler errors on some Android platforms (internal issue 441). * Clarify that slink:VkPhysicalDeviceFeatures::pname:pEnabledFeatures == `NULL` disables all features, including the "required" feature pname:robustBufferAccess (internal issue 479). Other Issues: * Expand style guide and make it more self-consistent. * Use ISO 8601 date format everywhere. * Emphasise the correct way of using slink:VkSurfaceCapabilitiesKHR::pname:maxImageCount. * Added +VK_EXT_validation_flags+ extension for validation flag mechanism. * Fix an <<credits,author credit>> to include their current employer.
2016-09-17 04:22:17 +00:00
* 2016-07-18 - Add examples of function-parameter and structure-member
Change log for July 22, 2016 Vulkan 1.0.22 spec update: * Bump API patch number and header version number to 22 for this update. Github Issues: * Translate the subpass self-dependency language into concrete validity statements, and added a validity statement about the restrictions on layout parameters (public issue 267). * Add validity requirement that slink:VkAttachmentDescription::pname:finalLayout and slink:VkAttachmentReference::pname:layout must not be ename:VK_IMAGE_LAYOUT_UNDEFINED or ename:VK_IMAGE_LAYOUT_PREINITIALIZED (public issue 268). * Clarify that slink:VkSubpassDescription::pname:pResolveAttachments layouts are used. Make language consistent with other attachment arrays (public issue 270). * Changed 64-bit definition for dname:VK_DEFINE_NON_DISPATCHABLE_HANDLE to work for x32 platform in +vk.xml+ and the resulting +vulkan.h+ (public issue 282). * Add missing error return code for flink:vkEnumerateInstanceExtensionProperties and flink:vkEnumerateDeviceExtensionProperties (public issue 285) * Fix several cases of stext::VkStructName.memberName markup to stext::VkStructName::pname:memberName, to match other usage in the spec, and describe this markup in the style guide (public issue 286). * Modified validity language generation script to avoid redundant common ancestor language if covered by generic parent language, and used `Both' instead of `Each' when appropriate (public issue 288). Internal Issues: * Add language about behavior of flink:vkAllocateDescriptorSets when allocation fails due to fragmentation, a new error ename:VK_ERROR_FRAGMENTED_POOL, and a Note explaining the situation (internal issue 309). * For the features of code:PointSize, code:ClipDistance, and code:CullDistance, the SPIR-V capability is required to be declared on use (read or write) rather than on decoration (internal issue 359). * Have desktop versions of GLSL respect precision qualification (code:mediump and code:lowp) when compiling for Vulkan. These will get translated to SPIR-V's code:RelaxedPrecision decoration as they do with OpenGL ES versions of GLSL (ESSL). The default precision of all types is code:highp when using a desktop version (internal issue 360). * Add validity statement for slink:VkImageCreateInfo specifying that multisampled images must be two-dimensional, optimally tiled, and with a single mipmap level (internal issue 369). * Add validity statements to slink:VkImageViewCreateInfo disallowing creation of images or image views with no supported features. Made some slink:VkImageViewCreateInfo validity statements more precise and consistent. Added a Note to the <<features,features>> chapter about formats with no features (internal issue 371). * Remove +manpages+ from default build targets. Nroff outputs containing imbedded latexmath will not render properly. Fixing this is a lot of work for limited use cases (internal issue 401). Other Commits: * Fix flink:vkRenderPassBeginInfo::pname:clearValueCount validity statement to be based on attachment indices rather than the number of cleared attachments (Vulkan-LoaderAndValidationLayers/issues/601). * Convert registry documentation from LaTeX to asciidoc source and rename from +src/spec/readme.tex+ to +src/spec/registry.txt+. * Fix lack of Oxford commas in validity language. * Lots of cleanup of generator scripts and Makefiles to move extension list for generator into the script arguments instead of the body of genvk.py, and express better dependencies between XML, scripts, and generated files.
2016-07-23 10:15:48 +00:00
markup (based on public issue 286).
Change log for September 16, 2016 Vulkan 1.0.27 spec update: * Bump API patch number and header version number to 27 for this update. Github Issues: * Weaken flink:vkGetPipelineCacheData invariance conditions; previous conditions were stronger than agreed and can't be guaranteed (public issue 280). * Add link to "Vulkan Loader Specification and Architecture Overview" document to Normative References section (public issue 359). Internal Issues: * Be more clear in the <<interfaces-resources-layout-std140, uniform buffer layout>> section that block offsets can be out of order (internal issue 396). * Document that extension authors should add support for their extensions to the validation layers (internal issue 398). * Clarify that the valid range of depth clear values should be limited to the 0..1 range and that copies to depth aspect must also be in this range (internal issue 412). * Specify ``a'' vs. ``an'' use in the style guide (internal issue 432). * Increase the maximum pname:nonCoherentAtomSize value in the <<features-limits-required,Required Limits>> section from 128 to 256 (internal issue 435). * Fix vk_platform.h for compiler errors on some Android platforms (internal issue 441). * Clarify that slink:VkPhysicalDeviceFeatures::pname:pEnabledFeatures == `NULL` disables all features, including the "required" feature pname:robustBufferAccess (internal issue 479). Other Issues: * Expand style guide and make it more self-consistent. * Use ISO 8601 date format everywhere. * Emphasise the correct way of using slink:VkSurfaceCapabilitiesKHR::pname:maxImageCount. * Added +VK_EXT_validation_flags+ extension for validation flag mechanism. * Fix an <<credits,author credit>> to include their current employer.
2016-09-17 04:22:17 +00:00
* 2016-07-11 - Change the document title.
* 2016-07-07 - Rename document, change license to CC BY, clarify required
Change log for February 10, 2017 Vulkan 1.0.40 spec update: * Bump API patch number and header version number to 40 for this update. * There is a major build change in this release. We are now using the Ruby-based ``asciidoctor'' implementation, rather than the Python-based ``asciidoc'' implementation, to process the specification. While the actual specification markup changes were minimal, this requires a new set of build tools and a very different installation process, especially because we now use an experimental direct-to-PDF backend for Asciidoctor instead of Docbook->dblatex->PDF. It is no longer possible to build the Specification using asciidoc. See doc/specs/vulkan/README.adoc for some guidance on installing the new toolchain components. * There are some minor rendering issues in the PDF output due to teething problems with the asciidoctor toolchain, especially with mathematical equations. We are aware of these and working on them. Github Issues: * Updated sample code for the <<sparsememory-examples-basic,sparse resource binding example>> (public issue 97). * Modify line and point clipping behavior in the <<vertexpostproc-clipping, Primitive Clipping>> section to allow for pop-free behavior. The ability to check for which behavior is implemented may be added a future feature or extension (public issue 113). * Unify the discussions of implicit ordering throughout the spec, in particular in the new sections <<drawing-primitive-order, Primitive Order>>, <<primrast-order, Rasterization Order>>, and <<synchronization-implicit, Implicit Synchronization Guarantees>>; the discussion of <<synchronization-submission-order, submission order>>; and references elsewhere to these sections (public issue 133). * Clarify \<\<descriptorsets-compatibility,Pipeline Layout Compatibility>> language and introduce the term ``identically defined'' (public issue 164). * Add a dependency to the +VK_EXT_debug_marker+ extension that's needed to reuse the object type enum from +VK_EXT_debug_report+, and moves the definition of that enum into +VK_EXT_debug_report+ where it should be (public issue 409). * Remove redundant valid usage statement from slink:VkImageBlit (public issue 421). * Update GL_KHR_vulkan_glsl to allow the ternary operator to result in a specialization constant (public issue 424). * Fix valid usage for flink:VkPipelineShaderStageCreateInfo (public issue 426). * Correct typo in New Objects list for <<VK_EXT_debug_report>> (public issue 447). Internal Issues: * Moved to asciidoctor for spec builds (internal issue 121). * Update style guide to describe where to put new extensions-specific asciidoc files, and what to name them (internal issue 626). * Add src/spec/indexExt.py to autogenerate registry index entries linking into the 1.0-extensions specification, instead of maintaining the index manually. (internal issue 642). * Autogenerate extension dependencies and lists of all extensions and all KHR extensions from the "supported" attributes in +vk.xml+. Execute +make config/extDependency.sh+ from +doc/specs/vulkan+ when a supported extension is added to vk.xml, to regenerate the dependency script. The consequence is that specifying a single extension to the +makeExt+ script will automatically enable all extensions it depends on as well, and that the +makeAllExts+ and +makeKHR+ scripts do not need to be updated when a new extension is supported (internal issue 648). * Put extension appendices all at the same asciidoc section level, so KHR WSI extensions show up in the HTML index (internal issue 648). Other Issues: * Imbed images in the generated HTML specs instead of loading them from the images/ directory. * Fix missing EXT in extension name (ename:VK_EXT_SWAPCHAIN_COLOR_SPACE_EXTENSION_NAME). * Add new +VK_EXT_SMPTE_2086_metadata+ extension. * In the <<platformCreateSurface_xlib,Xlib Surface>> section of the +VK_KHR_xlib_surface+ specification, add language warning users that they always need to call code:XinitThreads. * Use the term "presentable image" (rather than "swapchain image") consistently in +VK_KHR_swapchain+ and related extensions, and add a glossary term defining it. * Relocate the valid usage for samples of flink:vkGetPhysicalDeviceSparseImageFormatProperties2KHR::pname:pFormatInfo to be below the flink:VkPhysicalDeviceSparseImageFormatInfo2KHR structure.
2017-02-11 04:37:39 +00:00
and recommended actions, and reserve use of "`normative`" for the
Change log for July 15, 2016 Vulkan 1.0.21 spec update: * Bump API patch number and header version number to 21 for this update. Github Issues: * Clarify how <<features-supported-sample-counts,sample count queries>> relate to the limits in slink:VkPhysicalDeviceLimits. (public issue 185). * Clarify in the <<interfaces-iointerfaces,Shader Input and Output Interfaces>> section that shader output variables have undefined values until the shader writes to them (public issue 240). * Specify the implicit value of image parameters that cannot be set in slink:VkSwapchainCreateInfo::pname:flags, pname:imageType, pname:mipLevels, pname:samples, pname:tiling, and pname:initialLayout (public issue 243). * Make use of code:NULL and code:VK_NULL_HANDLE consistent in the VK_KHR_swapchain extension (public issue 276). Internal Issues: * Clarify that presenting an image to a display surface swapchain applies the display surface's mode, and that destroying a display surface swapchain may reset the display's mode, in the VK_KHR_display_swapchain extension (internal issue 247). * Better describe what a slink:VkSurfaceKHR is, and that creating one does not set a mode, in the VK_KHR_display extension. This is a round-about way of pointing out that mode setting is not covered by the extension, but rather is performed as a side effect of presentation (internal issue 247). * Add more valid usage statements to flink:vkQueuePresentKHR command when the VK_KHR_display_swapchain extension is present (internal issue 247). * Add more includes to the VK_KHR_swapchain extension to better document interactions with VK_KHR_display_swapchain (internal issue 247). * Clarify restrictions on location aliasing in the <<fxvertex,Fixed-Function Vertex Processing>> section (internal issue 370). * Add mathematical description of blitting to flink:vkCmdBlitImage, and link it to the <<textures,Image Operations>> chapter. Use mathematical notation for ranges of texel coordinates in the <<textures,Image Operations>> chapter. Fixed miscellaneous validity statements for flink:vkCmdBlit and slink:VkImageBlit (internal issue 382). Other Commits: * Added a valid usage rule to flink:VkGraphicsPipelineCreateInfo that the ename:VK_PRIMITIVE_TOPOLOGY_PATCH_LIST topology must only be used when tessellation shaders are used. * Expand the style guide into a formal "Procedures and Conventions" document. Add a API Naming Conventions section, move most of the API Specification Appendix C (Layers and Extensions) content into the new document, and define the resulting procedures as mandatory (where relevant). This more clearly separates use vs. specification of Vulkan APIs. * Update vk_platform.h to handle 32-bit ARMv8 binaries. * Various minor cleanups to the Makefile and build process.
2016-07-16 02:05:43 +00:00
Specifications.
Change log for September 16, 2016 Vulkan 1.0.27 spec update: * Bump API patch number and header version number to 27 for this update. Github Issues: * Weaken flink:vkGetPipelineCacheData invariance conditions; previous conditions were stronger than agreed and can't be guaranteed (public issue 280). * Add link to "Vulkan Loader Specification and Architecture Overview" document to Normative References section (public issue 359). Internal Issues: * Be more clear in the <<interfaces-resources-layout-std140, uniform buffer layout>> section that block offsets can be out of order (internal issue 396). * Document that extension authors should add support for their extensions to the validation layers (internal issue 398). * Clarify that the valid range of depth clear values should be limited to the 0..1 range and that copies to depth aspect must also be in this range (internal issue 412). * Specify ``a'' vs. ``an'' use in the style guide (internal issue 432). * Increase the maximum pname:nonCoherentAtomSize value in the <<features-limits-required,Required Limits>> section from 128 to 256 (internal issue 435). * Fix vk_platform.h for compiler errors on some Android platforms (internal issue 441). * Clarify that slink:VkPhysicalDeviceFeatures::pname:pEnabledFeatures == `NULL` disables all features, including the "required" feature pname:robustBufferAccess (internal issue 479). Other Issues: * Expand style guide and make it more self-consistent. * Use ISO 8601 date format everywhere. * Emphasise the correct way of using slink:VkSurfaceCapabilitiesKHR::pname:maxImageCount. * Added +VK_EXT_validation_flags+ extension for validation flag mechanism. * Fix an <<credits,author credit>> to include their current employer.
2016-09-17 04:22:17 +00:00
* 2016-06-26 - Move Layers and Extensions chapter from Appendix C of the
Change log for September 23, 2016 Vulkan 1.0.28 spec update: * Bump API patch number and header version number to 28 for this update. Github Issues: * Minor spelling and typography cleanup, add definitions of ename:VK_FALSE and ename:VK_TRUE as just what their names say (public issues 220, 318, 325, 365; internal issues 451, 496) * Clarify that the pname:maxDescriptorSet limits in the <<features-limits-required,Required Limits>> table are n * maxPerStage limit (where n=number of supported stages) (public issue 254). * Minor cleanup to <<boilerplate-platform-macros,Platform-Specific Macro Definitions>> appendix (public issue 314). * Add valid usage statement to slink:VkPipelineLayoutCreateInfo disallowing multiple push constant ranges for the same shader stage (public issue 340). * Clarify the elink:VkSharingMode description of what executing the "same" barriers means in case of ownership transfer (public issue 347). * Rename copyright.txt and add COPYING.md to try and reduce confusion about applicable copyrights (public issue 350). * Extend the table in the <<boilerplate-wsi-header, Window System-Specific Header Control>> section to describe the external headers included when each etext:VK_USE_PLATFORM_* macro is defined (public issue 376). Internal Issues: * Add "Revision History" to the PDF outputs following the table of contents, to match HTML outputs (internal issue 43). * Clarified that flink:vkMapMemory may fail due to virtual address space limitations (internal issue 346). * Add +refBody+ comment markup for ref page autoextraction when required (internal issue 400). * Document proper use of "mipmap" and "mip" in the style guide API naming rules, matching the spelling rules (internal issue 471). * Tweak the <<extensions,Layers and Extensions>> appendix to note that the Specification may be built with arbitrary combinations of extensions (internal issue 483). * Remove incorrect statement allowing slink:VkClearAttachment::pname:colorAttachment to be >= slink:VkSubpassDescription::pname:colorAttachmentCount (internal issue 488). * The <<features-limits-viewportboundsrange,viewportBoundsRange>> is expressed in terms of the pname:maxViewportDimensions but this is actually two values. Clarify that it's based on the larger of the two (if they differ) (internal issue 499). Other Issues: * Reflowed text of the entire spec using the 'reflow' Makefile gater, to (hopefully) reduce future internal git churn as edits are made and extensions added in return for one-time pain. This has no perceptible change on the spec outputs but considerable changes on the asciidoc source (internal issue 367).
2016-09-24 07:58:11 +00:00
Vulkan API Specification and merge content with the naming guide.
Put extension and naming chapters into their own source files.
Change log for September 16, 2016 Vulkan 1.0.27 spec update: * Bump API patch number and header version number to 27 for this update. Github Issues: * Weaken flink:vkGetPipelineCacheData invariance conditions; previous conditions were stronger than agreed and can't be guaranteed (public issue 280). * Add link to "Vulkan Loader Specification and Architecture Overview" document to Normative References section (public issue 359). Internal Issues: * Be more clear in the <<interfaces-resources-layout-std140, uniform buffer layout>> section that block offsets can be out of order (internal issue 396). * Document that extension authors should add support for their extensions to the validation layers (internal issue 398). * Clarify that the valid range of depth clear values should be limited to the 0..1 range and that copies to depth aspect must also be in this range (internal issue 412). * Specify ``a'' vs. ``an'' use in the style guide (internal issue 432). * Increase the maximum pname:nonCoherentAtomSize value in the <<features-limits-required,Required Limits>> section from 128 to 256 (internal issue 435). * Fix vk_platform.h for compiler errors on some Android platforms (internal issue 441). * Clarify that slink:VkPhysicalDeviceFeatures::pname:pEnabledFeatures == `NULL` disables all features, including the "required" feature pname:robustBufferAccess (internal issue 479). Other Issues: * Expand style guide and make it more self-consistent. * Use ISO 8601 date format everywhere. * Emphasise the correct way of using slink:VkSurfaceCapabilitiesKHR::pname:maxImageCount. * Added +VK_EXT_validation_flags+ extension for validation flag mechanism. * Fix an <<credits,author credit>> to include their current employer.
2016-09-17 04:22:17 +00:00
* 2016-06-20 - Add API naming guide.
* 2016-05-22 - Add markup and image creation rules, after fixing missing
Change log for September 6, 2016 Vulkan 1.0.26 spec update: * Bump API patch number and header version number to 26 for this update. Github Issues: * Bring sample code in the +VK_KHR_surface+ and +VK_KHR_swapchain+ extension summary appendices up to date, and note they will be replaced with pointers to the LunarG SDK examples in the future (public issue 279). * Add a new <<fundamentals-commandsyntax-results-lifetime,Lifetime of Retrieved Results>> section specifying that ftext:vkGet* and ftext:VkEnumerate* results are invariant unless otherwise specified, and specify behavior for individual commands which are not invariant (public issue 280). * Remove conflicting definition of slink:VkDisplayPlaneCapabilitiesKHR::pname:maxSrcPosition and clean up language of the remaining definition (public issue 351). * Fix many minor spelling errors and add rules to the style guide to prevent recurrences (public issue 352). Internal Issues: * Remove redundant descriptions of the etext:VK_USE_PLATFORM_* macros from the <<wsi,Window System Integration>> chapter in favor of the description in the <<boilerplate-wsi-header,Window System-Specific Header Control>> appendix (internal issue 6). * Replace misleading 'can: be destroyed when not X' with more correct 'must: not be destroyed while X' in the <<fundamentals-objectmodel-lifetime,Object Lifetime>> section. Disallow destroying a pipeline layout while a command buffer using it is recording (internal issue 241). * Clarify that ename:VK_IMAGE_USAGE_TRANSIENT_ATTACHMENT_BIT is valid for all images used as attachments in elink:VkImageUsageFlagBits and the slink:VkImageLayout validity language (internal issue 320). * Note that <<extended-functionality-layers,Layers>> may wrap object handles, but that this is a generally discouraged. A link to additional information in the documentation for layer authors is provided (issue 398) * Replace the mustnot: and shouldnot: macros with equivalent must: not and should: not to get rid of non-English words while still highlighting normative language (internal issue 407). * Disallow creating multisampled images with ename:VK_IMAGE_CREATE_CUBE_COMPATIBLE_BIT in the slink:VkImageLayout validity language and the <<features-supported-sample-counts,Supported Sample Counts>> section (internal issue 445). * Fix typo so that flink:vkCmdDrawIndexedIndirect is defined in terms of flink:vkCmdDrawIndexed rather than flink:vkCmdDrawIndirect (internal issue 446). * Reorganize the per-extension information sections to all be in the <<extensions,Layers & Extensions>> appendix. Also fix a typo in +VK_IMG_filter_cubic+ which incorrectly identified it as a +KHR+ extension (internal issue 461). Other Issues: * Use asciidoc markup instead of latexmath to simplify diagrams in the <<features-formats-non-packed,byte mapping tables>> for color formats. * Fix a markup problem with the wildcarded enumerant names in a NOTE in the <<textures-texel-replacement,Texel Replacement>> section. * Fix missing attributes in the XML interface for elink:VkExternalMemoryHandleTypeFlagBitsNV and elink:VkExternalMemoryFeatureFlagBitsNV (KhronosGroup/Vulkan-Hpp issue #25) * Cleanup reference page builds so only core pages are built for releases.
2016-09-06 13:17:27 +00:00
figure captions for public issue 219.
Change log for September 23, 2016 Vulkan 1.0.28 spec update: * Bump API patch number and header version number to 28 for this update. Github Issues: * Minor spelling and typography cleanup, add definitions of ename:VK_FALSE and ename:VK_TRUE as just what their names say (public issues 220, 318, 325, 365; internal issues 451, 496) * Clarify that the pname:maxDescriptorSet limits in the <<features-limits-required,Required Limits>> table are n * maxPerStage limit (where n=number of supported stages) (public issue 254). * Minor cleanup to <<boilerplate-platform-macros,Platform-Specific Macro Definitions>> appendix (public issue 314). * Add valid usage statement to slink:VkPipelineLayoutCreateInfo disallowing multiple push constant ranges for the same shader stage (public issue 340). * Clarify the elink:VkSharingMode description of what executing the "same" barriers means in case of ownership transfer (public issue 347). * Rename copyright.txt and add COPYING.md to try and reduce confusion about applicable copyrights (public issue 350). * Extend the table in the <<boilerplate-wsi-header, Window System-Specific Header Control>> section to describe the external headers included when each etext:VK_USE_PLATFORM_* macro is defined (public issue 376). Internal Issues: * Add "Revision History" to the PDF outputs following the table of contents, to match HTML outputs (internal issue 43). * Clarified that flink:vkMapMemory may fail due to virtual address space limitations (internal issue 346). * Add +refBody+ comment markup for ref page autoextraction when required (internal issue 400). * Document proper use of "mipmap" and "mip" in the style guide API naming rules, matching the spelling rules (internal issue 471). * Tweak the <<extensions,Layers and Extensions>> appendix to note that the Specification may be built with arbitrary combinations of extensions (internal issue 483). * Remove incorrect statement allowing slink:VkClearAttachment::pname:colorAttachment to be >= slink:VkSubpassDescription::pname:colorAttachmentCount (internal issue 488). * The <<features-limits-viewportboundsrange,viewportBoundsRange>> is expressed in terms of the pname:maxViewportDimensions but this is actually two values. Clarify that it's based on the larger of the two (if they differ) (internal issue 499). Other Issues: * Reflowed text of the entire spec using the 'reflow' Makefile gater, to (hopefully) reduce future internal git churn as edits are made and extensions added in return for one-time pain. This has no perceptible change on the spec outputs but considerable changes on the asciidoc source (internal issue 367).
2016-09-24 07:58:11 +00:00
* 2016-05-01 - Include feedback from public issues 120 and 190.
Use consistent conventions for defining structures.
Use American rather than British spelling conventions.
Change log for September 16, 2016 Vulkan 1.0.27 spec update: * Bump API patch number and header version number to 27 for this update. Github Issues: * Weaken flink:vkGetPipelineCacheData invariance conditions; previous conditions were stronger than agreed and can't be guaranteed (public issue 280). * Add link to "Vulkan Loader Specification and Architecture Overview" document to Normative References section (public issue 359). Internal Issues: * Be more clear in the <<interfaces-resources-layout-std140, uniform buffer layout>> section that block offsets can be out of order (internal issue 396). * Document that extension authors should add support for their extensions to the validation layers (internal issue 398). * Clarify that the valid range of depth clear values should be limited to the 0..1 range and that copies to depth aspect must also be in this range (internal issue 412). * Specify ``a'' vs. ``an'' use in the style guide (internal issue 432). * Increase the maximum pname:nonCoherentAtomSize value in the <<features-limits-required,Required Limits>> section from 128 to 256 (internal issue 435). * Fix vk_platform.h for compiler errors on some Android platforms (internal issue 441). * Clarify that slink:VkPhysicalDeviceFeatures::pname:pEnabledFeatures == `NULL` disables all features, including the "required" feature pname:robustBufferAccess (internal issue 479). Other Issues: * Expand style guide and make it more self-consistent. * Use ISO 8601 date format everywhere. * Emphasise the correct way of using slink:VkSurfaceCapabilitiesKHR::pname:maxImageCount. * Added +VK_EXT_validation_flags+ extension for validation flag mechanism. * Fix an <<credits,author credit>> to include their current employer.
2016-09-17 04:22:17 +00:00
* 2016-03-12 - Recommend against "the value of".
* 2016-02-26 - Replace use of the "maynot{cl}" macro with "may{cl} not".
* 2016-02-16 - Place asciidoc conversion post-release.
* 2016-02-09 - Added quotation mark convention.
* 2016-02-01 - Add the Oxford Comma section and issue resolution.
* 2016-01-26 - Add bullet-list style description of command parameters.
Change log for February 10, 2017 Vulkan 1.0.40 spec update: * Bump API patch number and header version number to 40 for this update. * There is a major build change in this release. We are now using the Ruby-based ``asciidoctor'' implementation, rather than the Python-based ``asciidoc'' implementation, to process the specification. While the actual specification markup changes were minimal, this requires a new set of build tools and a very different installation process, especially because we now use an experimental direct-to-PDF backend for Asciidoctor instead of Docbook->dblatex->PDF. It is no longer possible to build the Specification using asciidoc. See doc/specs/vulkan/README.adoc for some guidance on installing the new toolchain components. * There are some minor rendering issues in the PDF output due to teething problems with the asciidoctor toolchain, especially with mathematical equations. We are aware of these and working on them. Github Issues: * Updated sample code for the <<sparsememory-examples-basic,sparse resource binding example>> (public issue 97). * Modify line and point clipping behavior in the <<vertexpostproc-clipping, Primitive Clipping>> section to allow for pop-free behavior. The ability to check for which behavior is implemented may be added a future feature or extension (public issue 113). * Unify the discussions of implicit ordering throughout the spec, in particular in the new sections <<drawing-primitive-order, Primitive Order>>, <<primrast-order, Rasterization Order>>, and <<synchronization-implicit, Implicit Synchronization Guarantees>>; the discussion of <<synchronization-submission-order, submission order>>; and references elsewhere to these sections (public issue 133). * Clarify \<\<descriptorsets-compatibility,Pipeline Layout Compatibility>> language and introduce the term ``identically defined'' (public issue 164). * Add a dependency to the +VK_EXT_debug_marker+ extension that's needed to reuse the object type enum from +VK_EXT_debug_report+, and moves the definition of that enum into +VK_EXT_debug_report+ where it should be (public issue 409). * Remove redundant valid usage statement from slink:VkImageBlit (public issue 421). * Update GL_KHR_vulkan_glsl to allow the ternary operator to result in a specialization constant (public issue 424). * Fix valid usage for flink:VkPipelineShaderStageCreateInfo (public issue 426). * Correct typo in New Objects list for <<VK_EXT_debug_report>> (public issue 447). Internal Issues: * Moved to asciidoctor for spec builds (internal issue 121). * Update style guide to describe where to put new extensions-specific asciidoc files, and what to name them (internal issue 626). * Add src/spec/indexExt.py to autogenerate registry index entries linking into the 1.0-extensions specification, instead of maintaining the index manually. (internal issue 642). * Autogenerate extension dependencies and lists of all extensions and all KHR extensions from the "supported" attributes in +vk.xml+. Execute +make config/extDependency.sh+ from +doc/specs/vulkan+ when a supported extension is added to vk.xml, to regenerate the dependency script. The consequence is that specifying a single extension to the +makeExt+ script will automatically enable all extensions it depends on as well, and that the +makeAllExts+ and +makeKHR+ scripts do not need to be updated when a new extension is supported (internal issue 648). * Put extension appendices all at the same asciidoc section level, so KHR WSI extensions show up in the HTML index (internal issue 648). Other Issues: * Imbed images in the generated HTML specs instead of loading them from the images/ directory. * Fix missing EXT in extension name (ename:VK_EXT_SWAPCHAIN_COLOR_SPACE_EXTENSION_NAME). * Add new +VK_EXT_SMPTE_2086_metadata+ extension. * In the <<platformCreateSurface_xlib,Xlib Surface>> section of the +VK_KHR_xlib_surface+ specification, add language warning users that they always need to call code:XinitThreads. * Use the term "presentable image" (rather than "swapchain image") consistently in +VK_KHR_swapchain+ and related extensions, and add a glossary term defining it. * Relocate the valid usage for samples of flink:vkGetPhysicalDeviceSparseImageFormatProperties2KHR::pname:pFormatInfo to be below the flink:VkPhysicalDeviceSparseImageFormatInfo2KHR structure.
2017-02-11 04:37:39 +00:00
* 2016-01-11 - Add "`Numbers in Text`" section from WSI work.
* 2015-12-16 - Make "`begin / end`" preferred terms to "`start / finish`".
* 2015-12-15 - Make "`implementation`" preferred term instead of "`system`".
Change log for September 23, 2016 Vulkan 1.0.28 spec update: * Bump API patch number and header version number to 28 for this update. Github Issues: * Minor spelling and typography cleanup, add definitions of ename:VK_FALSE and ename:VK_TRUE as just what their names say (public issues 220, 318, 325, 365; internal issues 451, 496) * Clarify that the pname:maxDescriptorSet limits in the <<features-limits-required,Required Limits>> table are n * maxPerStage limit (where n=number of supported stages) (public issue 254). * Minor cleanup to <<boilerplate-platform-macros,Platform-Specific Macro Definitions>> appendix (public issue 314). * Add valid usage statement to slink:VkPipelineLayoutCreateInfo disallowing multiple push constant ranges for the same shader stage (public issue 340). * Clarify the elink:VkSharingMode description of what executing the "same" barriers means in case of ownership transfer (public issue 347). * Rename copyright.txt and add COPYING.md to try and reduce confusion about applicable copyrights (public issue 350). * Extend the table in the <<boilerplate-wsi-header, Window System-Specific Header Control>> section to describe the external headers included when each etext:VK_USE_PLATFORM_* macro is defined (public issue 376). Internal Issues: * Add "Revision History" to the PDF outputs following the table of contents, to match HTML outputs (internal issue 43). * Clarified that flink:vkMapMemory may fail due to virtual address space limitations (internal issue 346). * Add +refBody+ comment markup for ref page autoextraction when required (internal issue 400). * Document proper use of "mipmap" and "mip" in the style guide API naming rules, matching the spelling rules (internal issue 471). * Tweak the <<extensions,Layers and Extensions>> appendix to note that the Specification may be built with arbitrary combinations of extensions (internal issue 483). * Remove incorrect statement allowing slink:VkClearAttachment::pname:colorAttachment to be >= slink:VkSubpassDescription::pname:colorAttachmentCount (internal issue 488). * The <<features-limits-viewportboundsrange,viewportBoundsRange>> is expressed in terms of the pname:maxViewportDimensions but this is actually two values. Clarify that it's based on the larger of the two (if they differ) (internal issue 499). Other Issues: * Reflowed text of the entire spec using the 'reflow' Makefile gater, to (hopefully) reduce future internal git churn as edits are made and extensions added in return for one-time pain. This has no perceptible change on the spec outputs but considerable changes on the asciidoc source (internal issue 367).
2016-09-24 07:58:11 +00:00
* 2015-12-13 - Add tlink{cl}/tname{cl} macros for function pointer types.
Change log for September 16, 2016 Vulkan 1.0.27 spec update: * Bump API patch number and header version number to 27 for this update. Github Issues: * Weaken flink:vkGetPipelineCacheData invariance conditions; previous conditions were stronger than agreed and can't be guaranteed (public issue 280). * Add link to "Vulkan Loader Specification and Architecture Overview" document to Normative References section (public issue 359). Internal Issues: * Be more clear in the <<interfaces-resources-layout-std140, uniform buffer layout>> section that block offsets can be out of order (internal issue 396). * Document that extension authors should add support for their extensions to the validation layers (internal issue 398). * Clarify that the valid range of depth clear values should be limited to the 0..1 range and that copies to depth aspect must also be in this range (internal issue 412). * Specify ``a'' vs. ``an'' use in the style guide (internal issue 432). * Increase the maximum pname:nonCoherentAtomSize value in the <<features-limits-required,Required Limits>> section from 128 to 256 (internal issue 435). * Fix vk_platform.h for compiler errors on some Android platforms (internal issue 441). * Clarify that slink:VkPhysicalDeviceFeatures::pname:pEnabledFeatures == `NULL` disables all features, including the "required" feature pname:robustBufferAccess (internal issue 479). Other Issues: * Expand style guide and make it more self-consistent. * Use ISO 8601 date format everywhere. * Emphasise the correct way of using slink:VkSurfaceCapabilitiesKHR::pname:maxImageCount. * Added +VK_EXT_validation_flags+ extension for validation flag mechanism. * Fix an <<credits,author credit>> to include their current employer.
2016-09-17 04:22:17 +00:00
* 2015-12-10 - Initial release for feedback.