Change log for September 5, 2017 Vulkan 1.0.60 spec update:
* Bump API patch number and header version number to 60 for this update.
Github Issues:
* Document that <<queries-timestamps, Timestamp Queries>> can only be
meaningfully compared when they are written from the same queue (public
issue 216).
* Document that the `<extension>` tag `type` attribute is required for
non-disabled extensions (derived from, but does not close public issue
354).
* Clean up registry schema length attribute descriptions to be consistent
and correct (public issue 555).
Internal Issues:
* Replace as much of the hand-written extension appendix metadata as
possible with asciidoc includes generated from corresponding attributes
of +vk.xml+, and enhance the style guide to match. This avoids
inconsistencies between +vk.xml+ and the appendices, and produces a more
uniform style (internal issue 137).
* Remove the generated extDependency.{py,sh} files from the tree and
create them dynamically on demand instead, reducing merge conflicts
(internal issue 713).
* Add a prototype tool for generating in-place difference markup for
sections guarded by asciidoc conditionals, and new syntax for open
blocks to support it (internal issue 833).
* Remove unnecessary restriction of etext:*SYNC_FD_BIT_KHR external handle
types to the same physical device in the
slink:VkPhysicalDeviceIDPropertiesKHR,
flink:VkImportMemoryWin32HandleInfoKHR,
slink:VkImportFenceWin32HandleInfoKHR, slink:VkImportFenceFdInfoKHR,
slink:VkImportSemaphoreWin32HandleInfoKHR,
slink:VkImportSemaphoreFdInfoKHR
<<external-memory-handle-types-compatibility, External memory handle
types compatibility>>, <<external-semaphore-handle-types-compatibility,
External semaphore handle types compatibility>>, and
<<external-fence-handle-types-compatibility, External fence handle types
compatibility>> sections (internal issue 956).
Other Issues:
* Remove dependency of +VK_KHX_device_group+ on +VK_KHR_swapchain+ (there
is an interaction, but not a strict dependency), and add a new
`extension` attribute to the `<require` XML tag to allow classifying a
subset of interfaces of an extension as requiring another extension.
Update the registry schema and documentation accordingly.
New Extensions:
* `VK_AMD_shader_fragment_mask` (and related `GL_AMD_shader_fragment_mask`
GLSL extension)
* `VK_EXT_sample_locations`
* `VK_EXT_validation_cache`
2017-09-04 10:06:55 +00:00
|
|
|
include::meta/VK_AMD_rasterization_order.txt[]
|
2016-08-28 10:47:19 +00:00
|
|
|
|
2016-09-17 04:22:17 +00:00
|
|
|
*Last Modified Date*::
|
|
|
|
|
2016-04-25
|
2016-08-28 10:47:19 +00:00
|
|
|
*IP Status*::
|
2016-09-17 04:22:17 +00:00
|
|
|
No known IP claims.
|
2016-08-28 10:47:19 +00:00
|
|
|
*Contributors*::
|
Change log for September 23, 2016 Vulkan 1.0.28 spec update:
* Bump API patch number and header version number to 28 for this update.
Github Issues:
* Minor spelling and typography cleanup, add definitions of
ename:VK_FALSE and ename:VK_TRUE as just what their names say
(public issues 220, 318, 325, 365; internal issues 451, 496)
* Clarify that the pname:maxDescriptorSet limits in the
<<features-limits-required,Required Limits>> table are n *
maxPerStage limit (where n=number of supported stages) (public issue
254).
* Minor cleanup to <<boilerplate-platform-macros,Platform-Specific
Macro Definitions>> appendix (public issue 314).
* Add valid usage statement to slink:VkPipelineLayoutCreateInfo
disallowing multiple push constant ranges for the same shader stage
(public issue 340).
* Clarify the elink:VkSharingMode description of what executing the
"same" barriers means in case of ownership transfer (public issue
347).
* Rename copyright.txt and add COPYING.md to try and reduce confusion
about applicable copyrights (public issue 350).
* Extend the table in the <<boilerplate-wsi-header, Window System-Specific
Header Control>> section to describe the external headers included when
each etext:VK_USE_PLATFORM_* macro is defined (public issue 376).
Internal Issues:
* Add "Revision History" to the PDF outputs following the table of
contents, to match HTML outputs (internal issue 43).
* Clarified that flink:vkMapMemory may fail due to virtual address
space limitations (internal issue 346).
* Add +refBody+ comment markup for ref page autoextraction when required
(internal issue 400).
* Document proper use of "mipmap" and "mip" in the style guide API
naming rules, matching the spelling rules (internal issue 471).
* Tweak the <<extensions,Layers and Extensions>> appendix to note that
the Specification may be built with arbitrary combinations of
extensions (internal issue 483).
* Remove incorrect statement allowing
slink:VkClearAttachment::pname:colorAttachment to be >=
slink:VkSubpassDescription::pname:colorAttachmentCount (internal
issue 488).
* The <<features-limits-viewportboundsrange,viewportBoundsRange>> is
expressed in terms of the pname:maxViewportDimensions but this is
actually two values. Clarify that it's based on the larger of the two
(if they differ) (internal issue 499).
Other Issues:
* Reflowed text of the entire spec using the 'reflow' Makefile gater,
to (hopefully) reduce future internal git churn as edits are made
and extensions added in return for one-time pain. This has no
perceptible change on the spec outputs but considerable changes on
the asciidoc source (internal issue 367).
2016-09-24 07:58:11 +00:00
|
|
|
- Matthaeus G.
|
|
|
|
|
Chajdas, AMD
|
2016-08-28 10:47:19 +00:00
|
|
|
- Jaakko Konttinen, AMD
|
|
|
|
|
- Daniel Rakos, AMD
|
|
|
|
|
- Graham Sellers, AMD
|
|
|
|
|
- Dominik Witczak, AMD
|
|
|
|
|
|
|
|
|
|
This extension introduces the possibility for the application to control the
|
Change log for September 23, 2016 Vulkan 1.0.28 spec update:
* Bump API patch number and header version number to 28 for this update.
Github Issues:
* Minor spelling and typography cleanup, add definitions of
ename:VK_FALSE and ename:VK_TRUE as just what their names say
(public issues 220, 318, 325, 365; internal issues 451, 496)
* Clarify that the pname:maxDescriptorSet limits in the
<<features-limits-required,Required Limits>> table are n *
maxPerStage limit (where n=number of supported stages) (public issue
254).
* Minor cleanup to <<boilerplate-platform-macros,Platform-Specific
Macro Definitions>> appendix (public issue 314).
* Add valid usage statement to slink:VkPipelineLayoutCreateInfo
disallowing multiple push constant ranges for the same shader stage
(public issue 340).
* Clarify the elink:VkSharingMode description of what executing the
"same" barriers means in case of ownership transfer (public issue
347).
* Rename copyright.txt and add COPYING.md to try and reduce confusion
about applicable copyrights (public issue 350).
* Extend the table in the <<boilerplate-wsi-header, Window System-Specific
Header Control>> section to describe the external headers included when
each etext:VK_USE_PLATFORM_* macro is defined (public issue 376).
Internal Issues:
* Add "Revision History" to the PDF outputs following the table of
contents, to match HTML outputs (internal issue 43).
* Clarified that flink:vkMapMemory may fail due to virtual address
space limitations (internal issue 346).
* Add +refBody+ comment markup for ref page autoextraction when required
(internal issue 400).
* Document proper use of "mipmap" and "mip" in the style guide API
naming rules, matching the spelling rules (internal issue 471).
* Tweak the <<extensions,Layers and Extensions>> appendix to note that
the Specification may be built with arbitrary combinations of
extensions (internal issue 483).
* Remove incorrect statement allowing
slink:VkClearAttachment::pname:colorAttachment to be >=
slink:VkSubpassDescription::pname:colorAttachmentCount (internal
issue 488).
* The <<features-limits-viewportboundsrange,viewportBoundsRange>> is
expressed in terms of the pname:maxViewportDimensions but this is
actually two values. Clarify that it's based on the larger of the two
(if they differ) (internal issue 499).
Other Issues:
* Reflowed text of the entire spec using the 'reflow' Makefile gater,
to (hopefully) reduce future internal git churn as edits are made
and extensions added in return for one-time pain. This has no
perceptible change on the spec outputs but considerable changes on
the asciidoc source (internal issue 367).
2016-09-24 07:58:11 +00:00
|
|
|
order of primitive rasterization.
|
|
|
|
|
In unextended Vulkan, the following stages are guaranteed to execute in _API
|
|
|
|
|
order_:
|
2016-08-28 10:47:19 +00:00
|
|
|
|
|
|
|
|
* depth bounds test
|
|
|
|
|
* stencil test, stencil op, and stencil write
|
|
|
|
|
* depth test and depth write
|
|
|
|
|
* occlusion queries
|
|
|
|
|
* blending, logic op, and color write
|
|
|
|
|
|
|
|
|
|
This extension enables applications to opt into a relaxed, implementation
|
Change log for September 23, 2016 Vulkan 1.0.28 spec update:
* Bump API patch number and header version number to 28 for this update.
Github Issues:
* Minor spelling and typography cleanup, add definitions of
ename:VK_FALSE and ename:VK_TRUE as just what their names say
(public issues 220, 318, 325, 365; internal issues 451, 496)
* Clarify that the pname:maxDescriptorSet limits in the
<<features-limits-required,Required Limits>> table are n *
maxPerStage limit (where n=number of supported stages) (public issue
254).
* Minor cleanup to <<boilerplate-platform-macros,Platform-Specific
Macro Definitions>> appendix (public issue 314).
* Add valid usage statement to slink:VkPipelineLayoutCreateInfo
disallowing multiple push constant ranges for the same shader stage
(public issue 340).
* Clarify the elink:VkSharingMode description of what executing the
"same" barriers means in case of ownership transfer (public issue
347).
* Rename copyright.txt and add COPYING.md to try and reduce confusion
about applicable copyrights (public issue 350).
* Extend the table in the <<boilerplate-wsi-header, Window System-Specific
Header Control>> section to describe the external headers included when
each etext:VK_USE_PLATFORM_* macro is defined (public issue 376).
Internal Issues:
* Add "Revision History" to the PDF outputs following the table of
contents, to match HTML outputs (internal issue 43).
* Clarified that flink:vkMapMemory may fail due to virtual address
space limitations (internal issue 346).
* Add +refBody+ comment markup for ref page autoextraction when required
(internal issue 400).
* Document proper use of "mipmap" and "mip" in the style guide API
naming rules, matching the spelling rules (internal issue 471).
* Tweak the <<extensions,Layers and Extensions>> appendix to note that
the Specification may be built with arbitrary combinations of
extensions (internal issue 483).
* Remove incorrect statement allowing
slink:VkClearAttachment::pname:colorAttachment to be >=
slink:VkSubpassDescription::pname:colorAttachmentCount (internal
issue 488).
* The <<features-limits-viewportboundsrange,viewportBoundsRange>> is
expressed in terms of the pname:maxViewportDimensions but this is
actually two values. Clarify that it's based on the larger of the two
(if they differ) (internal issue 499).
Other Issues:
* Reflowed text of the entire spec using the 'reflow' Makefile gater,
to (hopefully) reduce future internal git churn as edits are made
and extensions added in return for one-time pain. This has no
perceptible change on the spec outputs but considerable changes on
the asciidoc source (internal issue 367).
2016-09-24 07:58:11 +00:00
|
|
|
defined primitive rasterization order that may allow better parallel
|
|
|
|
|
processing of primitives and thus enabling higher primitive throughput.
|
|
|
|
|
It is applicable in cases where the primitive rasterization order is known
|
|
|
|
|
to not affect the output of the rendering or any differences caused by a
|
|
|
|
|
different rasterization order are not a concern from the point of view of
|
|
|
|
|
the application's purpose.
|
2016-08-28 10:47:19 +00:00
|
|
|
|
|
|
|
|
A few examples of cases when using the relaxed primitive rasterization order
|
|
|
|
|
would not have an effect on the final rendering:
|
|
|
|
|
|
Change log for September 23, 2016 Vulkan 1.0.28 spec update:
* Bump API patch number and header version number to 28 for this update.
Github Issues:
* Minor spelling and typography cleanup, add definitions of
ename:VK_FALSE and ename:VK_TRUE as just what their names say
(public issues 220, 318, 325, 365; internal issues 451, 496)
* Clarify that the pname:maxDescriptorSet limits in the
<<features-limits-required,Required Limits>> table are n *
maxPerStage limit (where n=number of supported stages) (public issue
254).
* Minor cleanup to <<boilerplate-platform-macros,Platform-Specific
Macro Definitions>> appendix (public issue 314).
* Add valid usage statement to slink:VkPipelineLayoutCreateInfo
disallowing multiple push constant ranges for the same shader stage
(public issue 340).
* Clarify the elink:VkSharingMode description of what executing the
"same" barriers means in case of ownership transfer (public issue
347).
* Rename copyright.txt and add COPYING.md to try and reduce confusion
about applicable copyrights (public issue 350).
* Extend the table in the <<boilerplate-wsi-header, Window System-Specific
Header Control>> section to describe the external headers included when
each etext:VK_USE_PLATFORM_* macro is defined (public issue 376).
Internal Issues:
* Add "Revision History" to the PDF outputs following the table of
contents, to match HTML outputs (internal issue 43).
* Clarified that flink:vkMapMemory may fail due to virtual address
space limitations (internal issue 346).
* Add +refBody+ comment markup for ref page autoextraction when required
(internal issue 400).
* Document proper use of "mipmap" and "mip" in the style guide API
naming rules, matching the spelling rules (internal issue 471).
* Tweak the <<extensions,Layers and Extensions>> appendix to note that
the Specification may be built with arbitrary combinations of
extensions (internal issue 483).
* Remove incorrect statement allowing
slink:VkClearAttachment::pname:colorAttachment to be >=
slink:VkSubpassDescription::pname:colorAttachmentCount (internal
issue 488).
* The <<features-limits-viewportboundsrange,viewportBoundsRange>> is
expressed in terms of the pname:maxViewportDimensions but this is
actually two values. Clarify that it's based on the larger of the two
(if they differ) (internal issue 499).
Other Issues:
* Reflowed text of the entire spec using the 'reflow' Makefile gater,
to (hopefully) reduce future internal git churn as edits are made
and extensions added in return for one-time pain. This has no
perceptible change on the spec outputs but considerable changes on
the asciidoc source (internal issue 367).
2016-09-24 07:58:11 +00:00
|
|
|
* If the primitives rendered are known to not overlap in framebuffer
|
|
|
|
|
space.
|
2016-08-28 10:47:19 +00:00
|
|
|
* If depth testing is used with a comparison operator of
|
|
|
|
|
ename:VK_COMPARE_OP_LESS, ename:VK_COMPARE_OP_LESS_OR_EQUAL,
|
|
|
|
|
ename:VK_COMPARE_OP_GREATER, or ename:VK_COMPARE_OP_GREATER_OR_EQUAL,
|
|
|
|
|
and the primitives rendered are known to not overlap in clip space.
|
|
|
|
|
* If depth testing is not used and blending is enabled for all attachments
|
|
|
|
|
with a commutative blend operator.
|
|
|
|
|
|
|
|
|
|
=== New Object Types
|
|
|
|
|
|
|
|
|
|
None
|
|
|
|
|
|
|
|
|
|
=== New Enum Constants
|
|
|
|
|
|
Change log for September 6, 2016 Vulkan 1.0.26 spec update:
* Bump API patch number and header version number to 26 for this update.
Github Issues:
* Bring sample code in the +VK_KHR_surface+ and +VK_KHR_swapchain+
extension summary appendices up to date, and note they will be replaced
with pointers to the LunarG SDK examples in the future (public issue
279).
* Add a new <<fundamentals-commandsyntax-results-lifetime,Lifetime of
Retrieved Results>> section specifying that ftext:vkGet* and
ftext:VkEnumerate* results are invariant unless otherwise specified, and
specify behavior for individual commands which are not invariant (public
issue 280).
* Remove conflicting definition of
slink:VkDisplayPlaneCapabilitiesKHR::pname:maxSrcPosition and clean up
language of the remaining definition (public issue 351).
* Fix many minor spelling errors and add rules to the style guide to
prevent recurrences (public issue 352).
Internal Issues:
* Remove redundant descriptions of the etext:VK_USE_PLATFORM_* macros from
the <<wsi,Window System Integration>> chapter in favor of the
description in the <<boilerplate-wsi-header,Window System-Specific
Header Control>> appendix (internal issue 6).
* Replace misleading 'can: be destroyed when not X' with more correct
'must: not be destroyed while X' in the
<<fundamentals-objectmodel-lifetime,Object Lifetime>> section. Disallow
destroying a pipeline layout while a command buffer using it is
recording (internal issue 241).
* Clarify that ename:VK_IMAGE_USAGE_TRANSIENT_ATTACHMENT_BIT is valid for
all images used as attachments in elink:VkImageUsageFlagBits and the
slink:VkImageLayout validity language (internal issue 320).
* Note that <<extended-functionality-layers,Layers>> may wrap object
handles, but that this is a generally discouraged. A link to additional
information in the documentation for layer authors is provided (issue
398)
* Replace the mustnot: and shouldnot: macros with equivalent must: not and
should: not to get rid of non-English words while still highlighting
normative language (internal issue 407).
* Disallow creating multisampled images with
ename:VK_IMAGE_CREATE_CUBE_COMPATIBLE_BIT in the slink:VkImageLayout
validity language and the <<features-supported-sample-counts,Supported
Sample Counts>> section (internal issue 445).
* Fix typo so that flink:vkCmdDrawIndexedIndirect is defined in terms of
flink:vkCmdDrawIndexed rather than flink:vkCmdDrawIndirect (internal
issue 446).
* Reorganize the per-extension information sections to all be in the
<<extensions,Layers & Extensions>> appendix. Also fix a typo in
+VK_IMG_filter_cubic+ which incorrectly identified it as a +KHR+
extension (internal issue 461).
Other Issues:
* Use asciidoc markup instead of latexmath to simplify diagrams in the
<<features-formats-non-packed,byte mapping tables>> for color formats.
* Fix a markup problem with the wildcarded enumerant names in a NOTE in
the <<textures-texel-replacement,Texel Replacement>> section.
* Fix missing attributes in the XML interface for
elink:VkExternalMemoryHandleTypeFlagBitsNV and
elink:VkExternalMemoryFeatureFlagBitsNV (KhronosGroup/Vulkan-Hpp issue
#25)
* Cleanup reference page builds so only core pages are built for releases.
2016-09-06 13:17:27 +00:00
|
|
|
* Extending elink:VkStructureType:
|
2016-08-28 10:47:19 +00:00
|
|
|
** ename:VK_STRUCTURE_TYPE_PIPELINE_RASTERIZATION_STATE_RASTERIZATION_ORDER_AMD
|
|
|
|
|
|
|
|
|
|
=== New Enums
|
|
|
|
|
|
|
|
|
|
* elink:VkRasterizationOrderAMD
|
|
|
|
|
|
|
|
|
|
=== New Structures
|
|
|
|
|
|
|
|
|
|
* slink:VkPipelineRasterizationStateRasterizationOrderAMD
|
|
|
|
|
|
|
|
|
|
=== New Functions
|
|
|
|
|
|
|
|
|
|
None
|
|
|
|
|
|
|
|
|
|
=== Issues
|
|
|
|
|
|
Change log for September 23, 2016 Vulkan 1.0.28 spec update:
* Bump API patch number and header version number to 28 for this update.
Github Issues:
* Minor spelling and typography cleanup, add definitions of
ename:VK_FALSE and ename:VK_TRUE as just what their names say
(public issues 220, 318, 325, 365; internal issues 451, 496)
* Clarify that the pname:maxDescriptorSet limits in the
<<features-limits-required,Required Limits>> table are n *
maxPerStage limit (where n=number of supported stages) (public issue
254).
* Minor cleanup to <<boilerplate-platform-macros,Platform-Specific
Macro Definitions>> appendix (public issue 314).
* Add valid usage statement to slink:VkPipelineLayoutCreateInfo
disallowing multiple push constant ranges for the same shader stage
(public issue 340).
* Clarify the elink:VkSharingMode description of what executing the
"same" barriers means in case of ownership transfer (public issue
347).
* Rename copyright.txt and add COPYING.md to try and reduce confusion
about applicable copyrights (public issue 350).
* Extend the table in the <<boilerplate-wsi-header, Window System-Specific
Header Control>> section to describe the external headers included when
each etext:VK_USE_PLATFORM_* macro is defined (public issue 376).
Internal Issues:
* Add "Revision History" to the PDF outputs following the table of
contents, to match HTML outputs (internal issue 43).
* Clarified that flink:vkMapMemory may fail due to virtual address
space limitations (internal issue 346).
* Add +refBody+ comment markup for ref page autoextraction when required
(internal issue 400).
* Document proper use of "mipmap" and "mip" in the style guide API
naming rules, matching the spelling rules (internal issue 471).
* Tweak the <<extensions,Layers and Extensions>> appendix to note that
the Specification may be built with arbitrary combinations of
extensions (internal issue 483).
* Remove incorrect statement allowing
slink:VkClearAttachment::pname:colorAttachment to be >=
slink:VkSubpassDescription::pname:colorAttachmentCount (internal
issue 488).
* The <<features-limits-viewportboundsrange,viewportBoundsRange>> is
expressed in terms of the pname:maxViewportDimensions but this is
actually two values. Clarify that it's based on the larger of the two
(if they differ) (internal issue 499).
Other Issues:
* Reflowed text of the entire spec using the 'reflow' Makefile gater,
to (hopefully) reduce future internal git churn as edits are made
and extensions added in return for one-time pain. This has no
perceptible change on the spec outputs but considerable changes on
the asciidoc source (internal issue 367).
2016-09-24 07:58:11 +00:00
|
|
|
1) How is this extension useful to application developers?
|
2016-08-28 10:47:19 +00:00
|
|
|
|
Change log for January 23, 2017 Vulkan 1.0.39 spec update:
* Bump API patch number and header version number to 39 for this update.
Github Issues:
* Clarified that only accesses via the specified buffer/image subresource
ranges are included in the access scopes (public issue 306).
* Add missing valid usage statements for flink:vkCreateComputePipelines
and flink:vkCreateGraphicsPipelines (public issue 427).
Internal Issues:
* Add a Note to the <<invariance,Invariance>> appendix about a difference
between OpenGL and Vulkan with regards to how primitives derived from
offsets are handled (internal issue 355).
* Add the +<<VK_KHR_get_physical_device_properties2>>+,
+<<VK_KHR_maintenance1>>+, and +<<VK_KHR_shader_draw_parameters>>+
extensions (internal issue 448).
* Add the +<<VK_EXT_shader_subgroup_vote>>+ and
+<<VK_EXT_shader_subgroup_ballot>>+ extensions (internal issue 449).
* Update the texture level-of-detail equation in the
<<textures-scale-factor,Scale Factor Operation>> section to better
approximate the ellipse major and minor axes (internal issue 547).
* Forbid non-explicitly allowed uses of interface decorations in the
introduction to the <<interfaces,Shader Interfaces>> chapter (internal
issue 607).
* Replace use of MathJax with KaTeX, for improved load-time performance as
well as avoiding the scrolling-and-scrolling behavior due to MathJax
asynchronous rendering when loading at an anchor inside the spec. This
change also requires moving to HTML5 output for the spec instead of
XHTML, and there is a visible difference in that the chapter navigation
index is now in a scrollable sidebar instead of at the top of the
document. We may or may not retain the nav sidebar based on feedback
(internal issue 613).
* Improve consistency of markup and formatting in extension appendices
(internal issue 631).
Other Issues:
* Add explicit valid usage statements to slink:VkImageCopy requiring that
the source and destination layer ranges be contained in their respective
source and destination images.
* Add valid usage language for swapchain of flink:vkAcquireNextImage. If
the swapchain has been replaced, then it should not be passed to
flink:vkAcquireNextImage.
* Add a valid usage statement to flink:vkCreateImageView, that the image
must have been created with an appropriate usage bit set.
* Noted that slink:VkDisplayPresentInfoKHR is a valid extension of
slink:VkPresentInfoKHR in the <<wsi_swapchain,WSI Swapchain>> section.
* Update valid usage for flink:vkCmdSetViewport and flink:vkCmdSetScissor
to account for the multiple viewport feature. If the feature is not
enabled, the parameters for these functions have required values that
are defined in the <<features-features-multiViewport,multiple
viewports>> section of the spec but were not reflected in the valid
usage text for these functions.
* Add the +<<VK_EXT_swapchain_colorspace>>+ extension defining common
color spaces.
2017-01-18 04:11:25 +00:00
|
|
|
*RESOLVED*: Allows them to increase primitive throughput for cases when
|
|
|
|
|
strict API order rasterization is not important due to the nature of the
|
|
|
|
|
content, the configuration used, or the requirements towards the output of
|
|
|
|
|
the rendering.
|
2016-08-28 10:47:19 +00:00
|
|
|
|
Change log for September 23, 2016 Vulkan 1.0.28 spec update:
* Bump API patch number and header version number to 28 for this update.
Github Issues:
* Minor spelling and typography cleanup, add definitions of
ename:VK_FALSE and ename:VK_TRUE as just what their names say
(public issues 220, 318, 325, 365; internal issues 451, 496)
* Clarify that the pname:maxDescriptorSet limits in the
<<features-limits-required,Required Limits>> table are n *
maxPerStage limit (where n=number of supported stages) (public issue
254).
* Minor cleanup to <<boilerplate-platform-macros,Platform-Specific
Macro Definitions>> appendix (public issue 314).
* Add valid usage statement to slink:VkPipelineLayoutCreateInfo
disallowing multiple push constant ranges for the same shader stage
(public issue 340).
* Clarify the elink:VkSharingMode description of what executing the
"same" barriers means in case of ownership transfer (public issue
347).
* Rename copyright.txt and add COPYING.md to try and reduce confusion
about applicable copyrights (public issue 350).
* Extend the table in the <<boilerplate-wsi-header, Window System-Specific
Header Control>> section to describe the external headers included when
each etext:VK_USE_PLATFORM_* macro is defined (public issue 376).
Internal Issues:
* Add "Revision History" to the PDF outputs following the table of
contents, to match HTML outputs (internal issue 43).
* Clarified that flink:vkMapMemory may fail due to virtual address
space limitations (internal issue 346).
* Add +refBody+ comment markup for ref page autoextraction when required
(internal issue 400).
* Document proper use of "mipmap" and "mip" in the style guide API
naming rules, matching the spelling rules (internal issue 471).
* Tweak the <<extensions,Layers and Extensions>> appendix to note that
the Specification may be built with arbitrary combinations of
extensions (internal issue 483).
* Remove incorrect statement allowing
slink:VkClearAttachment::pname:colorAttachment to be >=
slink:VkSubpassDescription::pname:colorAttachmentCount (internal
issue 488).
* The <<features-limits-viewportboundsrange,viewportBoundsRange>> is
expressed in terms of the pname:maxViewportDimensions but this is
actually two values. Clarify that it's based on the larger of the two
(if they differ) (internal issue 499).
Other Issues:
* Reflowed text of the entire spec using the 'reflow' Makefile gater,
to (hopefully) reduce future internal git churn as edits are made
and extensions added in return for one-time pain. This has no
perceptible change on the spec outputs but considerable changes on
the asciidoc source (internal issue 367).
2016-09-24 07:58:11 +00:00
|
|
|
2) How does this extension interact with content optimizations aiming to
|
Change log for January 23, 2017 Vulkan 1.0.39 spec update:
* Bump API patch number and header version number to 39 for this update.
Github Issues:
* Clarified that only accesses via the specified buffer/image subresource
ranges are included in the access scopes (public issue 306).
* Add missing valid usage statements for flink:vkCreateComputePipelines
and flink:vkCreateGraphicsPipelines (public issue 427).
Internal Issues:
* Add a Note to the <<invariance,Invariance>> appendix about a difference
between OpenGL and Vulkan with regards to how primitives derived from
offsets are handled (internal issue 355).
* Add the +<<VK_KHR_get_physical_device_properties2>>+,
+<<VK_KHR_maintenance1>>+, and +<<VK_KHR_shader_draw_parameters>>+
extensions (internal issue 448).
* Add the +<<VK_EXT_shader_subgroup_vote>>+ and
+<<VK_EXT_shader_subgroup_ballot>>+ extensions (internal issue 449).
* Update the texture level-of-detail equation in the
<<textures-scale-factor,Scale Factor Operation>> section to better
approximate the ellipse major and minor axes (internal issue 547).
* Forbid non-explicitly allowed uses of interface decorations in the
introduction to the <<interfaces,Shader Interfaces>> chapter (internal
issue 607).
* Replace use of MathJax with KaTeX, for improved load-time performance as
well as avoiding the scrolling-and-scrolling behavior due to MathJax
asynchronous rendering when loading at an anchor inside the spec. This
change also requires moving to HTML5 output for the spec instead of
XHTML, and there is a visible difference in that the chapter navigation
index is now in a scrollable sidebar instead of at the top of the
document. We may or may not retain the nav sidebar based on feedback
(internal issue 613).
* Improve consistency of markup and formatting in extension appendices
(internal issue 631).
Other Issues:
* Add explicit valid usage statements to slink:VkImageCopy requiring that
the source and destination layer ranges be contained in their respective
source and destination images.
* Add valid usage language for swapchain of flink:vkAcquireNextImage. If
the swapchain has been replaced, then it should not be passed to
flink:vkAcquireNextImage.
* Add a valid usage statement to flink:vkCreateImageView, that the image
must have been created with an appropriate usage bit set.
* Noted that slink:VkDisplayPresentInfoKHR is a valid extension of
slink:VkPresentInfoKHR in the <<wsi_swapchain,WSI Swapchain>> section.
* Update valid usage for flink:vkCmdSetViewport and flink:vkCmdSetScissor
to account for the multiple viewport feature. If the feature is not
enabled, the parameters for these functions have required values that
are defined in the <<features-features-multiViewport,multiple
viewports>> section of the spec but were not reflected in the valid
usage text for these functions.
* Add the +<<VK_EXT_swapchain_colorspace>>+ extension defining common
color spaces.
2017-01-18 04:11:25 +00:00
|
|
|
reduce overdraw by appropriately ordering the input primitives?
|
2016-08-28 10:47:19 +00:00
|
|
|
|
Change log for January 23, 2017 Vulkan 1.0.39 spec update:
* Bump API patch number and header version number to 39 for this update.
Github Issues:
* Clarified that only accesses via the specified buffer/image subresource
ranges are included in the access scopes (public issue 306).
* Add missing valid usage statements for flink:vkCreateComputePipelines
and flink:vkCreateGraphicsPipelines (public issue 427).
Internal Issues:
* Add a Note to the <<invariance,Invariance>> appendix about a difference
between OpenGL and Vulkan with regards to how primitives derived from
offsets are handled (internal issue 355).
* Add the +<<VK_KHR_get_physical_device_properties2>>+,
+<<VK_KHR_maintenance1>>+, and +<<VK_KHR_shader_draw_parameters>>+
extensions (internal issue 448).
* Add the +<<VK_EXT_shader_subgroup_vote>>+ and
+<<VK_EXT_shader_subgroup_ballot>>+ extensions (internal issue 449).
* Update the texture level-of-detail equation in the
<<textures-scale-factor,Scale Factor Operation>> section to better
approximate the ellipse major and minor axes (internal issue 547).
* Forbid non-explicitly allowed uses of interface decorations in the
introduction to the <<interfaces,Shader Interfaces>> chapter (internal
issue 607).
* Replace use of MathJax with KaTeX, for improved load-time performance as
well as avoiding the scrolling-and-scrolling behavior due to MathJax
asynchronous rendering when loading at an anchor inside the spec. This
change also requires moving to HTML5 output for the spec instead of
XHTML, and there is a visible difference in that the chapter navigation
index is now in a scrollable sidebar instead of at the top of the
document. We may or may not retain the nav sidebar based on feedback
(internal issue 613).
* Improve consistency of markup and formatting in extension appendices
(internal issue 631).
Other Issues:
* Add explicit valid usage statements to slink:VkImageCopy requiring that
the source and destination layer ranges be contained in their respective
source and destination images.
* Add valid usage language for swapchain of flink:vkAcquireNextImage. If
the swapchain has been replaced, then it should not be passed to
flink:vkAcquireNextImage.
* Add a valid usage statement to flink:vkCreateImageView, that the image
must have been created with an appropriate usage bit set.
* Noted that slink:VkDisplayPresentInfoKHR is a valid extension of
slink:VkPresentInfoKHR in the <<wsi_swapchain,WSI Swapchain>> section.
* Update valid usage for flink:vkCmdSetViewport and flink:vkCmdSetScissor
to account for the multiple viewport feature. If the feature is not
enabled, the parameters for these functions have required values that
are defined in the <<features-features-multiViewport,multiple
viewports>> section of the spec but were not reflected in the valid
usage text for these functions.
* Add the +<<VK_EXT_swapchain_colorspace>>+ extension defining common
color spaces.
2017-01-18 04:11:25 +00:00
|
|
|
*RESOLVED*: While the relaxed rasterization order might somewhat limit the
|
|
|
|
|
effectiveness of such content optimizations, most of the benefits of it are
|
Change log for March 17, 2017 Vulkan 1.0.44 spec update:
* Bump API patch number and header version number to 44 for this update.
Github Issues:
* Fix description of <<features-extentperimagetype, Allowed Extent Values
Based On Image Type>> (public issue 290).
* Better specify VK_DEVICE_LOST behavior around flink:vkQueueSubmit,
flink:vkWaitForFences, and flink:vkGetFenceStatus (public issue 423).
* Clarify definition of flink:vkGetQueryPoolResults::pname:queryCount
(public issue 441).
* Simplify and clean up normative language. Remove shall and replace
recommend and variants with should wherever possible (public issue 448).
* Fix all dangling internal cross-references in the 1.0-extensions
specification, and add scripts/checkXrefs to find these in the future
(public issue 456).
* Reverse order of ChangeLog.txt entries so the most recent version is
documented first (public issue 463)
* Removes "become invalid" which clashes with invalid state for command
buffers. (public issue 467)
* Disallowed pending state in spec text for vkResetCommandBuffer, matching
valid usage (public issue 468)
* Removes sentence describing invalid state "like initial state". (public
issue 469)
* Disallows begin command buffer from resetting command buffers in the
"recording" state. (public issue 470)
* Removes mention of state from description of
VK_COMMAND_POOL_CREATE_RESET_COMMAND_BUFFER_BIT (public issue 471)
* Removed extra valid usage statement in VkSubmitInfo (public issue 472)
Internal Issues:
* Clarify description of the pname:imageLayout member of
sname:VkDescriptorImageInfo.
* Fix typos where etext:VK_VIEW_TYPE* was used instead of
etext:VK_IMAGE_VIEW_TYPE.
* Removed the <<VK_KHR_display>> and <<VK_KHR_display_swapchain>> example
code from the specification and noted it has been moved to the Vulkan
SDK cube demo (internal issue 179).
* Reorder VkExternalMemoryHandleTypeFlagBitsNV description (internal issue
480).
* Clarify than an implementation is
<<fundamentals-validusage-flags,permitted to return 'undefined' bit
flags>> in a bitfield (internal issue 640).
* Break Valid Usage statements describing unrelated parameters into
separate statements, and add a style guide entry to follow this approach
(internal issue 685).
* Move valid usage statement for slink:VkImageCreateInfo from spec body to
the explicit valid usage block (internal issue 693).
* Fix typos in the descriptions of slink:VkDisplaySurfaceCreateInfoKHR,
flink:vkCreateDisplayModeKHR, and
flink:vkGetDisplayPlaneSupportedDisplaysKHR in the <<display,Presenting
Directly to Display Devices>> section (internal issue 698, 704, 716).
* Clarified that mandatory depth/stencil formats are only a requirement
for 2D images (internal issue 719).
* Clarify that variables decorated with DeviceIndex/ViewIndex must be in
the Input storage class (internal issue 733).
* Work around generator script problem with removal of Unicode literals
from Python 3.0-3.2 using `future` package (internal issue 737).
* Remove nonexistent structure type enums from vk.xml (internal issue
738).
* Fix validextensionstructs attributes for structures in the pname:pNext
chain for VkPresentInfoKHR, fixing implicit valid usage statements for
those structures (internal issue 740).
New Extensions:
2017-03-18 05:53:58 +00:00
|
|
|
expected to be retained even when the relaxed rasterization order is used,
|
|
|
|
|
so applications should: still apply these optimizations even if they intend
|
|
|
|
|
to use the extension.
|
2016-08-28 10:47:19 +00:00
|
|
|
|
Change log for September 23, 2016 Vulkan 1.0.28 spec update:
* Bump API patch number and header version number to 28 for this update.
Github Issues:
* Minor spelling and typography cleanup, add definitions of
ename:VK_FALSE and ename:VK_TRUE as just what their names say
(public issues 220, 318, 325, 365; internal issues 451, 496)
* Clarify that the pname:maxDescriptorSet limits in the
<<features-limits-required,Required Limits>> table are n *
maxPerStage limit (where n=number of supported stages) (public issue
254).
* Minor cleanup to <<boilerplate-platform-macros,Platform-Specific
Macro Definitions>> appendix (public issue 314).
* Add valid usage statement to slink:VkPipelineLayoutCreateInfo
disallowing multiple push constant ranges for the same shader stage
(public issue 340).
* Clarify the elink:VkSharingMode description of what executing the
"same" barriers means in case of ownership transfer (public issue
347).
* Rename copyright.txt and add COPYING.md to try and reduce confusion
about applicable copyrights (public issue 350).
* Extend the table in the <<boilerplate-wsi-header, Window System-Specific
Header Control>> section to describe the external headers included when
each etext:VK_USE_PLATFORM_* macro is defined (public issue 376).
Internal Issues:
* Add "Revision History" to the PDF outputs following the table of
contents, to match HTML outputs (internal issue 43).
* Clarified that flink:vkMapMemory may fail due to virtual address
space limitations (internal issue 346).
* Add +refBody+ comment markup for ref page autoextraction when required
(internal issue 400).
* Document proper use of "mipmap" and "mip" in the style guide API
naming rules, matching the spelling rules (internal issue 471).
* Tweak the <<extensions,Layers and Extensions>> appendix to note that
the Specification may be built with arbitrary combinations of
extensions (internal issue 483).
* Remove incorrect statement allowing
slink:VkClearAttachment::pname:colorAttachment to be >=
slink:VkSubpassDescription::pname:colorAttachmentCount (internal
issue 488).
* The <<features-limits-viewportboundsrange,viewportBoundsRange>> is
expressed in terms of the pname:maxViewportDimensions but this is
actually two values. Clarify that it's based on the larger of the two
(if they differ) (internal issue 499).
Other Issues:
* Reflowed text of the entire spec using the 'reflow' Makefile gater,
to (hopefully) reduce future internal git churn as edits are made
and extensions added in return for one-time pain. This has no
perceptible change on the spec outputs but considerable changes on
the asciidoc source (internal issue 367).
2016-09-24 07:58:11 +00:00
|
|
|
3) Are there any guarantees about the primitive rasterization order when
|
Change log for January 23, 2017 Vulkan 1.0.39 spec update:
* Bump API patch number and header version number to 39 for this update.
Github Issues:
* Clarified that only accesses via the specified buffer/image subresource
ranges are included in the access scopes (public issue 306).
* Add missing valid usage statements for flink:vkCreateComputePipelines
and flink:vkCreateGraphicsPipelines (public issue 427).
Internal Issues:
* Add a Note to the <<invariance,Invariance>> appendix about a difference
between OpenGL and Vulkan with regards to how primitives derived from
offsets are handled (internal issue 355).
* Add the +<<VK_KHR_get_physical_device_properties2>>+,
+<<VK_KHR_maintenance1>>+, and +<<VK_KHR_shader_draw_parameters>>+
extensions (internal issue 448).
* Add the +<<VK_EXT_shader_subgroup_vote>>+ and
+<<VK_EXT_shader_subgroup_ballot>>+ extensions (internal issue 449).
* Update the texture level-of-detail equation in the
<<textures-scale-factor,Scale Factor Operation>> section to better
approximate the ellipse major and minor axes (internal issue 547).
* Forbid non-explicitly allowed uses of interface decorations in the
introduction to the <<interfaces,Shader Interfaces>> chapter (internal
issue 607).
* Replace use of MathJax with KaTeX, for improved load-time performance as
well as avoiding the scrolling-and-scrolling behavior due to MathJax
asynchronous rendering when loading at an anchor inside the spec. This
change also requires moving to HTML5 output for the spec instead of
XHTML, and there is a visible difference in that the chapter navigation
index is now in a scrollable sidebar instead of at the top of the
document. We may or may not retain the nav sidebar based on feedback
(internal issue 613).
* Improve consistency of markup and formatting in extension appendices
(internal issue 631).
Other Issues:
* Add explicit valid usage statements to slink:VkImageCopy requiring that
the source and destination layer ranges be contained in their respective
source and destination images.
* Add valid usage language for swapchain of flink:vkAcquireNextImage. If
the swapchain has been replaced, then it should not be passed to
flink:vkAcquireNextImage.
* Add a valid usage statement to flink:vkCreateImageView, that the image
must have been created with an appropriate usage bit set.
* Noted that slink:VkDisplayPresentInfoKHR is a valid extension of
slink:VkPresentInfoKHR in the <<wsi_swapchain,WSI Swapchain>> section.
* Update valid usage for flink:vkCmdSetViewport and flink:vkCmdSetScissor
to account for the multiple viewport feature. If the feature is not
enabled, the parameters for these functions have required values that
are defined in the <<features-features-multiViewport,multiple
viewports>> section of the spec but were not reflected in the valid
usage text for these functions.
* Add the +<<VK_EXT_swapchain_colorspace>>+ extension defining common
color spaces.
2017-01-18 04:11:25 +00:00
|
|
|
using the new relaxed mode?
|
2016-08-28 10:47:19 +00:00
|
|
|
|
Change log for January 23, 2017 Vulkan 1.0.39 spec update:
* Bump API patch number and header version number to 39 for this update.
Github Issues:
* Clarified that only accesses via the specified buffer/image subresource
ranges are included in the access scopes (public issue 306).
* Add missing valid usage statements for flink:vkCreateComputePipelines
and flink:vkCreateGraphicsPipelines (public issue 427).
Internal Issues:
* Add a Note to the <<invariance,Invariance>> appendix about a difference
between OpenGL and Vulkan with regards to how primitives derived from
offsets are handled (internal issue 355).
* Add the +<<VK_KHR_get_physical_device_properties2>>+,
+<<VK_KHR_maintenance1>>+, and +<<VK_KHR_shader_draw_parameters>>+
extensions (internal issue 448).
* Add the +<<VK_EXT_shader_subgroup_vote>>+ and
+<<VK_EXT_shader_subgroup_ballot>>+ extensions (internal issue 449).
* Update the texture level-of-detail equation in the
<<textures-scale-factor,Scale Factor Operation>> section to better
approximate the ellipse major and minor axes (internal issue 547).
* Forbid non-explicitly allowed uses of interface decorations in the
introduction to the <<interfaces,Shader Interfaces>> chapter (internal
issue 607).
* Replace use of MathJax with KaTeX, for improved load-time performance as
well as avoiding the scrolling-and-scrolling behavior due to MathJax
asynchronous rendering when loading at an anchor inside the spec. This
change also requires moving to HTML5 output for the spec instead of
XHTML, and there is a visible difference in that the chapter navigation
index is now in a scrollable sidebar instead of at the top of the
document. We may or may not retain the nav sidebar based on feedback
(internal issue 613).
* Improve consistency of markup and formatting in extension appendices
(internal issue 631).
Other Issues:
* Add explicit valid usage statements to slink:VkImageCopy requiring that
the source and destination layer ranges be contained in their respective
source and destination images.
* Add valid usage language for swapchain of flink:vkAcquireNextImage. If
the swapchain has been replaced, then it should not be passed to
flink:vkAcquireNextImage.
* Add a valid usage statement to flink:vkCreateImageView, that the image
must have been created with an appropriate usage bit set.
* Noted that slink:VkDisplayPresentInfoKHR is a valid extension of
slink:VkPresentInfoKHR in the <<wsi_swapchain,WSI Swapchain>> section.
* Update valid usage for flink:vkCmdSetViewport and flink:vkCmdSetScissor
to account for the multiple viewport feature. If the feature is not
enabled, the parameters for these functions have required values that
are defined in the <<features-features-multiViewport,multiple
viewports>> section of the spec but were not reflected in the valid
usage text for these functions.
* Add the +<<VK_EXT_swapchain_colorspace>>+ extension defining common
color spaces.
2017-01-18 04:11:25 +00:00
|
|
|
*RESOLVED*: No.
|
|
|
|
|
The rasterization order is completely implementation dependent in this case
|
|
|
|
|
but in practice it is expected to partially still follow the order of
|
|
|
|
|
incoming primitives.
|
2016-08-28 10:47:19 +00:00
|
|
|
|
Change log for September 23, 2016 Vulkan 1.0.28 spec update:
* Bump API patch number and header version number to 28 for this update.
Github Issues:
* Minor spelling and typography cleanup, add definitions of
ename:VK_FALSE and ename:VK_TRUE as just what their names say
(public issues 220, 318, 325, 365; internal issues 451, 496)
* Clarify that the pname:maxDescriptorSet limits in the
<<features-limits-required,Required Limits>> table are n *
maxPerStage limit (where n=number of supported stages) (public issue
254).
* Minor cleanup to <<boilerplate-platform-macros,Platform-Specific
Macro Definitions>> appendix (public issue 314).
* Add valid usage statement to slink:VkPipelineLayoutCreateInfo
disallowing multiple push constant ranges for the same shader stage
(public issue 340).
* Clarify the elink:VkSharingMode description of what executing the
"same" barriers means in case of ownership transfer (public issue
347).
* Rename copyright.txt and add COPYING.md to try and reduce confusion
about applicable copyrights (public issue 350).
* Extend the table in the <<boilerplate-wsi-header, Window System-Specific
Header Control>> section to describe the external headers included when
each etext:VK_USE_PLATFORM_* macro is defined (public issue 376).
Internal Issues:
* Add "Revision History" to the PDF outputs following the table of
contents, to match HTML outputs (internal issue 43).
* Clarified that flink:vkMapMemory may fail due to virtual address
space limitations (internal issue 346).
* Add +refBody+ comment markup for ref page autoextraction when required
(internal issue 400).
* Document proper use of "mipmap" and "mip" in the style guide API
naming rules, matching the spelling rules (internal issue 471).
* Tweak the <<extensions,Layers and Extensions>> appendix to note that
the Specification may be built with arbitrary combinations of
extensions (internal issue 483).
* Remove incorrect statement allowing
slink:VkClearAttachment::pname:colorAttachment to be >=
slink:VkSubpassDescription::pname:colorAttachmentCount (internal
issue 488).
* The <<features-limits-viewportboundsrange,viewportBoundsRange>> is
expressed in terms of the pname:maxViewportDimensions but this is
actually two values. Clarify that it's based on the larger of the two
(if they differ) (internal issue 499).
Other Issues:
* Reflowed text of the entire spec using the 'reflow' Makefile gater,
to (hopefully) reduce future internal git churn as edits are made
and extensions added in return for one-time pain. This has no
perceptible change on the spec outputs but considerable changes on
the asciidoc source (internal issue 367).
2016-09-24 07:58:11 +00:00
|
|
|
4) Does the new relaxed rasterization order have any adverse effect on
|
Change log for January 23, 2017 Vulkan 1.0.39 spec update:
* Bump API patch number and header version number to 39 for this update.
Github Issues:
* Clarified that only accesses via the specified buffer/image subresource
ranges are included in the access scopes (public issue 306).
* Add missing valid usage statements for flink:vkCreateComputePipelines
and flink:vkCreateGraphicsPipelines (public issue 427).
Internal Issues:
* Add a Note to the <<invariance,Invariance>> appendix about a difference
between OpenGL and Vulkan with regards to how primitives derived from
offsets are handled (internal issue 355).
* Add the +<<VK_KHR_get_physical_device_properties2>>+,
+<<VK_KHR_maintenance1>>+, and +<<VK_KHR_shader_draw_parameters>>+
extensions (internal issue 448).
* Add the +<<VK_EXT_shader_subgroup_vote>>+ and
+<<VK_EXT_shader_subgroup_ballot>>+ extensions (internal issue 449).
* Update the texture level-of-detail equation in the
<<textures-scale-factor,Scale Factor Operation>> section to better
approximate the ellipse major and minor axes (internal issue 547).
* Forbid non-explicitly allowed uses of interface decorations in the
introduction to the <<interfaces,Shader Interfaces>> chapter (internal
issue 607).
* Replace use of MathJax with KaTeX, for improved load-time performance as
well as avoiding the scrolling-and-scrolling behavior due to MathJax
asynchronous rendering when loading at an anchor inside the spec. This
change also requires moving to HTML5 output for the spec instead of
XHTML, and there is a visible difference in that the chapter navigation
index is now in a scrollable sidebar instead of at the top of the
document. We may or may not retain the nav sidebar based on feedback
(internal issue 613).
* Improve consistency of markup and formatting in extension appendices
(internal issue 631).
Other Issues:
* Add explicit valid usage statements to slink:VkImageCopy requiring that
the source and destination layer ranges be contained in their respective
source and destination images.
* Add valid usage language for swapchain of flink:vkAcquireNextImage. If
the swapchain has been replaced, then it should not be passed to
flink:vkAcquireNextImage.
* Add a valid usage statement to flink:vkCreateImageView, that the image
must have been created with an appropriate usage bit set.
* Noted that slink:VkDisplayPresentInfoKHR is a valid extension of
slink:VkPresentInfoKHR in the <<wsi_swapchain,WSI Swapchain>> section.
* Update valid usage for flink:vkCmdSetViewport and flink:vkCmdSetScissor
to account for the multiple viewport feature. If the feature is not
enabled, the parameters for these functions have required values that
are defined in the <<features-features-multiViewport,multiple
viewports>> section of the spec but were not reflected in the valid
usage text for these functions.
* Add the +<<VK_EXT_swapchain_colorspace>>+ extension defining common
color spaces.
2017-01-18 04:11:25 +00:00
|
|
|
repeatability and other invariance rules of the API?
|
2016-08-28 10:47:19 +00:00
|
|
|
|
Change log for January 23, 2017 Vulkan 1.0.39 spec update:
* Bump API patch number and header version number to 39 for this update.
Github Issues:
* Clarified that only accesses via the specified buffer/image subresource
ranges are included in the access scopes (public issue 306).
* Add missing valid usage statements for flink:vkCreateComputePipelines
and flink:vkCreateGraphicsPipelines (public issue 427).
Internal Issues:
* Add a Note to the <<invariance,Invariance>> appendix about a difference
between OpenGL and Vulkan with regards to how primitives derived from
offsets are handled (internal issue 355).
* Add the +<<VK_KHR_get_physical_device_properties2>>+,
+<<VK_KHR_maintenance1>>+, and +<<VK_KHR_shader_draw_parameters>>+
extensions (internal issue 448).
* Add the +<<VK_EXT_shader_subgroup_vote>>+ and
+<<VK_EXT_shader_subgroup_ballot>>+ extensions (internal issue 449).
* Update the texture level-of-detail equation in the
<<textures-scale-factor,Scale Factor Operation>> section to better
approximate the ellipse major and minor axes (internal issue 547).
* Forbid non-explicitly allowed uses of interface decorations in the
introduction to the <<interfaces,Shader Interfaces>> chapter (internal
issue 607).
* Replace use of MathJax with KaTeX, for improved load-time performance as
well as avoiding the scrolling-and-scrolling behavior due to MathJax
asynchronous rendering when loading at an anchor inside the spec. This
change also requires moving to HTML5 output for the spec instead of
XHTML, and there is a visible difference in that the chapter navigation
index is now in a scrollable sidebar instead of at the top of the
document. We may or may not retain the nav sidebar based on feedback
(internal issue 613).
* Improve consistency of markup and formatting in extension appendices
(internal issue 631).
Other Issues:
* Add explicit valid usage statements to slink:VkImageCopy requiring that
the source and destination layer ranges be contained in their respective
source and destination images.
* Add valid usage language for swapchain of flink:vkAcquireNextImage. If
the swapchain has been replaced, then it should not be passed to
flink:vkAcquireNextImage.
* Add a valid usage statement to flink:vkCreateImageView, that the image
must have been created with an appropriate usage bit set.
* Noted that slink:VkDisplayPresentInfoKHR is a valid extension of
slink:VkPresentInfoKHR in the <<wsi_swapchain,WSI Swapchain>> section.
* Update valid usage for flink:vkCmdSetViewport and flink:vkCmdSetScissor
to account for the multiple viewport feature. If the feature is not
enabled, the parameters for these functions have required values that
are defined in the <<features-features-multiViewport,multiple
viewports>> section of the spec but were not reflected in the valid
usage text for these functions.
* Add the +<<VK_EXT_swapchain_colorspace>>+ extension defining common
color spaces.
2017-01-18 04:11:25 +00:00
|
|
|
*RESOLVED*: Yes, in the sense that it extends the list of exceptions when
|
|
|
|
|
the repeatability requirement does not apply.
|
2016-08-28 10:47:19 +00:00
|
|
|
|
|
|
|
|
=== Examples
|
|
|
|
|
|
|
|
|
|
None
|
|
|
|
|
|
|
|
|
|
=== Issues
|
|
|
|
|
|
|
|
|
|
None
|
|
|
|
|
|
|
|
|
|
=== Version History
|
|
|
|
|
|
|
|
|
|
* Revision 1, 2016-04-25 (Daniel Rakos)
|
|
|
|
|
- Initial draft.
|