fb3398fa39
feat(label-editing): enable direct editing for group labels
...
* Adds external label for Groups
* Modifies referenced categoryValue
Closes #955
2019-05-28 06:46:53 +00:00
bc4b6cbfd8
fix(tests): fix custom elements tests
...
* in the context of bpmn-js returning true when asked wether two elements can be connected is not sufficient
* remove BpmnConnectionPreview since it's not needed after tests are fixed
Closes #1034
2019-05-23 18:26:12 +02:00
92640b9c06
test(group-behavior): add test for existing categoryValueRef
2019-05-23 15:12:38 +02:00
a7e3980059
feat(modeling/behaviors): add GroupBehavior
...
* Create new Category + Value for every new Group
* Cleanup on Group deletion
2019-05-23 15:12:38 +02:00
87bfe23ff8
feat(connection-preview): support general connection preview
...
Closes #744
2019-05-17 11:15:06 +02:00
654fa067d4
test(modeling): verify re-connect preview layout
2019-05-17 11:15:06 +02:00
82dbcc9451
test(modeling/behavior): remove unnecessary sinon usage
2019-05-16 15:25:15 +02:00
05fea05834
feat(modeling): prevent expanded subprocess overlap of previous content
...
This covers two scenarios:
1. When a shape is replaced with an expanded subprocess
2. When a subprocess is toggled from collapsed to expanded
Only when:
1. There are incoming sequence flows (previous content)
2. There are no outgoing sequence flows (following content)
2019-05-15 16:57:32 +02:00
2bdb36919d
test(modeling): verify connection preview layout
2019-05-09 14:12:37 +00:00
2335282a82
fix(bpmn-create-connect-preview): override #getConnection
2019-05-09 14:12:37 +00:00
48fcececbf
test(layout): add integration test for connection preview
2019-05-08 12:59:27 +00:00
883d6c8ad3
test(ResizeShape): add test coverage
...
* Restructure tests to make them more clear
* Add tests for businessObject updates (especially groups)
2019-05-07 14:36:32 +02:00
424a05a18a
feat(modeling): correctly handle event based gateway connections
...
Handles two new scenarios:
1. A user wants to connect an event-based gateway to an event-based
gateway target with existing incoming sequence flows. The existing
sequence flows are removed before connecting the new one.
2. A user wants to replace a gateway, that is already connected to
event-based gateway targets, with an event-based gateway. The existing
incoming sequence flows of the targets, which do not belong to the
newly replaced event-based gateway, are removed before the replacement
operation finishes.
This is because target elements in an event gateway configuration
must not have any additional incoming sequence flows other than
that from the event gateway.
2019-05-06 12:41:11 +02:00
b6e9c2186a
fix(BpmnRules): update canConnectSequenceFlow()
...
This prevents multiple incoming sequence flows to target events of an
event-based gateway when the connection source is not an event-based
gateway.
2019-05-06 12:41:11 +02:00
2935b23ee4
test(modeling/behavior): reorganize label positioning behavior specs
2019-04-25 16:27:58 +02:00
06ffc9d407
fix(modeling/BpmnLayouter): properly lay out boundary event connections
...
Closes #891
2019-04-24 11:56:01 +00:00
a40b95cf2f
test(modeling): verify connection layouting on element removal
...
Closes #989
2019-04-18 18:15:31 +02:00
55ca4c8f3d
chore(modeling/label): adjust label position to laid out connection
...
Closes #718
2019-04-18 16:06:44 +00:00
6c191590b5
test(modeling/layout): expect layout on reconnect end
2019-04-18 16:06:44 +00:00
6a396fb947
test(modeling/layout): add integration test for reconnection
2019-04-18 16:06:44 +00:00
8eced8a3fb
test(modeling): ensure layout is done after element removal
...
* adjust test suite to pass with diagram-js@3.2
* verify new cropping behavior
* verify #940 is fixed
2019-04-10 19:08:49 +00:00
6f7925080c
chore(modeling/BpmnUpdater): remove now unnecessary crop on reconnect
...
As of diagram-js@3.2.0 layouting will be triggered
on reconnectStart / reconnectEnd.
Related to #940
2019-04-10 19:08:49 +00:00
fe9d4ff06d
feat(modeling): ensure wrapping DataInput/Output in participant works
2019-03-29 13:21:34 +00:00
8c49cb679b
fix(modeling): properly handle DataInput / DataOutput move
...
Closes #961
2019-03-29 13:21:34 +00:00
4c270a01e4
test(Modeler): add data input / output editing spec
2019-03-26 11:55:36 +01:00
0a9efb793b
test(modeling/behavior): localize test diagram
2019-03-12 08:56:03 +00:00
39d4f1c57e
feat(modeling): set isHorizontal=true for partipant/lane DIs
...
Closes #934
2019-01-31 10:46:16 +00:00
6d54ff34e3
chore(boundary-event-behavior): clean up tests
2018-10-17 14:31:40 +00:00
178e1cfccb
fix(modeling/behaviors): add a behavior that deletes attached boundaries after replacing a gateway with an event based gateway
2018-10-17 13:12:31 +00:00
b3e4b1dc1f
fix(modeling/behaviors): add behavior for deleting boundaries on receive tasks after connecting to event based gateway
2018-10-16 10:53:57 +00:00
898a0fa9c8
fix(modeling/DropOnFlowBehavior): filter redundant connections
...
This prevents duplicate flows from being created, accidentially.
Closes #774
2018-07-25 11:10:51 +02:00
e637a8e57b
feat(modeling/BpmnLayouter): layout Element -> Element loops
...
Closes #824
2018-07-13 10:29:00 +02:00
220c0a73f3
feat(modeling/BpmnLayouter): handle boundary events
...
This adds proper connection layouting for sequence
flows leaving from boundary events.
If needed, such connections will be layoute with
an U-turn.
Closes #467
2018-07-13 10:16:11 +02:00
4806938600
feat(modeling): create label at appropriate position
...
This re-introduces adaptive label positioning
on label creation as a feature.
It worked before but broke during the introduction
of optional labels.
Closes #825
2018-07-11 13:26:43 +02:00
15596ef97c
test(modeling): verify correct label adjustment
2018-07-11 13:10:18 +02:00
abbe54912f
test(modeling): correct test cases
...
Ensure the test cases are not affected by accidential
automatic label adjumstment (TM).
2018-07-11 13:09:40 +02:00
300e7010c4
fix(modeling): correct DataStoreBehavior updating multiple stores
2018-06-18 09:21:18 +02:00
5cc28d5d55
fix(modeling): apply DataStoreBehavior in collaboration only
...
* updating parents of datastores in the root is only
necessary when deleting a subprocess in a collaboration
Related to camunda/camunda-modeler#823
2018-06-13 13:48:39 +02:00
100f3fb2ee
fix(label-behavior): text annotation resizing after text property change
...
Depends on bpmn-io/diagram-js#259
Related to camunda/camunda-modeler#631
2018-06-13 11:02:55 +02:00
6c081d854f
chore(label-editing): remove businessObject name on empty text
...
The following two actions will now unset the
business objects name property:
* deleting external label
* entering empty text via direct editing
2018-06-11 11:39:08 +02:00
a7a1743df0
fix(modeling): properly cascade label deletion
...
Ensure we execute the following nicely:
* unset name -> remove label shape
* remove label shape -> unset name
2018-06-11 11:39:08 +02:00
4a0f6da814
fix(label-behavior): properly check for name property change
...
Related to camunda/camunda-modeler#824
2018-06-06 13:35:57 +02:00
891cf4ac0c
feat(draw+modeling): support lineHeight
...
* take numeric line height into account when
rendering text labels
* take line height into account when directly
editing labels
* use default line height of 1.2 for text rendering
Closes #803
2018-05-29 11:58:15 +02:00
b1a4e08ddd
feat(modeling): assign ID when creating bpmn:LaneSet
2018-05-28 09:55:30 +02:00
7537757357
feat(labels): labels can be deleted
...
Related to camunda/camunda-modeler#243
2018-05-24 16:22:51 +02:00
690417b389
feat(modeling): allow data store anywhere in collaboration
...
ensure valid BPMN 2.0 parent when
* creating/moving data store
* removing participant
* turning process into collaboration
* turning collaboration into process
Closes #483
2018-05-17 15:09:37 +02:00
0f62183410
test(modeling): verify missing bpmndi:BPMNLabel update behavior
2018-05-17 14:57:54 +02:00
b98dd6fe95
fix(modeling): correctly handle missing bpmndi:Label bounds
...
Closes #794
2018-05-17 14:57:54 +02:00
327eb90140
style(tests): use not.to matchers
...
...in favor of to.not.
2018-05-03 16:37:24 +02:00
9be61259bd
chore(project): drop 'use strict'
...
We use ES modules, so 'use strict' is not necessary anymore.
2018-04-03 18:09:53 +02:00
Niklas Kiefer
Philipp Fromme
Maciej Barelkowski
Gustavo E. Jimenez Folta
Nico Rehwaldt