diff --git a/rln-delay-simulations/README.md b/rln-delay-simulations/README.md
index 5028a69..cc5975a 100644
--- a/rln-delay-simulations/README.md
+++ b/rln-delay-simulations/README.md
@@ -1,4 +1,10 @@
-## rln-delay-simulations
+# rln-delay-simulations
+
+This folder contains two methods of simulations, that aim to estimate the latency of waku messages in the network:
+* Method 1: Using `shadow`, which allows simulating hundreds of nodes in a single machine, considering network conditions but not CPU. See [report](https://github.com/waku-org/research/issues/42)  
+* Method 2: Using Digital Ocean, deploying real nodes in different locations in real machines with real network conditions, but due to cost limited to few nodes.
+
+## Method 1: Shadow
 
 This folder contains a `shadow` configuration to simulate `1000` `nwaku` nodes in an end to end setup:
 * `nwaku` binaries are used, built with `make wakunode2` but with a minor modification, see [simulations](https://github.com/waku-org/nwaku/compare/master...simulations)
@@ -8,7 +14,7 @@ This folder contains a `shadow` configuration to simulate `1000` `nwaku` nodes i
 * See simulation parameters: latency, bandwidth, amount of nodes, amount of publishers.
 * Note that due to TCP flow control, when using big messages the first ones to arrive will show a higher delay. Filter them out to not bias the measurements.
 
-## How to run
+### How to run
 
 Get `nwaku` codebase and checkout to [simulations](https://github.com/waku-org/nwaku/tree/simulations) branch, build it and start the [shadow](https://github.com/shadow/shadow) simulation. Ensure `path` points to the `wakunode2` binary and you have enough resources.
 
@@ -20,7 +26,7 @@ make wakunode2
 shadow shadow.yaml
 ```
 
-## How to analyze
+### How to analyze
 
 First check that the simulation finished ok. Check that the numbers match.
 ```
@@ -44,4 +50,73 @@ Print results:
 ```
 python analyze.py latency.txt "arrival_diff="
 python analyze.py mesh_size.txt "mesh_size="
-```
\ No newline at end of file
+```
+
+## Method 2: Digital Ocean
+
+In this method we deploy real `nwaku` nodes at different locations with [some traces](https://github.com/waku-org/nwaku/compare/master...benchmark-latencies) that allow us to measure the propagation times of a given message across all nodes. For this experiment, 5
+locations were selected:
+* Frankfurt
+* New York
+* San Francisco
+* Bangalore
+* Singapore
+
+Since deploying thousands of nodes would be costly, we connected the nodes in cascade:
+`Singapore<->Bangalore<->San Francisco<->New York<->Frankfurt`
+
+This forces a message to travel multiple hops. For example, a message introduced by the `Singapore` instance has to travel via `Bangalore` and `San Francisco` before reaching `New York`. This effectively simulates the existing hops in a real network.
+The following commands allow to reproduce the setup. Its assumed that you have 5 different machines at 5 different locations and you can ssh into them:
+
+In every machine, compile `wakunode2`
+```
+apt-get install build-essential git libpq5
+curl --proto '=https' --tlsv1.2 -sSf https://sh.rustup.rs | sh
+source "$HOME/.cargo/env"
+git clone https://github.com/waku-org/nwaku.git
+cd nwaku
+git checkout benchmark-latencies
+make wakunode2
+```
+
+Start `Singapore` node. Note `rest` api is enabled. Set also the message size that you want. Set `--max-msg-size=600KB` if you want a bigger message size.
+
+```
+export MSG_SIZE_KB=100
+./build/wakunode2 --rest --rest-address=0.0.0.0 --relay=true --topic=/waku/2/test --rln-relay=true --rln-relay-dynamic=false --rln-relay-membership-index=0 --nodekey=070a6101339f8e03a56bf21127dbbb0110b9b6efdb1e217115ed6d80da7a46d0
+```
+
+Connect `Bangalore`<->`Singapore`
+```
+./build/wakunode2 --relay=true --topic=/waku/2/test --rln-relay=true --rln-relay-dynamic=false --rln-relay-membership-index=1 --nodekey=e9c166557cf6cf1d0fc6a4b1bb98e417a6de6c361b228dea72d54ffe4442a115 --staticnode=/ip4/SINGAPORE_IP/tcp/60000/p2p/16Uiu2HAmU3GnnKHPLJFWDLGMEt1mNDAFmaKWUdkR9gWutaLbk2xx
+```
+
+
+Connect `San Francisco`<->`Bangalore`
+```
+./build/wakunode2 --relay=true --topic=/waku/2/test --rln-relay=true --rln-relay-dynamic=false --rln-relay-membership-index=2 --nodekey=f9a4f0f889b6dbf55d6b32bb8a85c418df01f013cebcd23efd8a250df65d9337 --staticnode=/ip4/BANGALORE_IP/tcp/60000/p2p/16Uiu2HAmSDAp4VrbKQPStDLg7rc38JJR3zE5mJcFieAGJLBrCFCy
+
+```
+
+Connect `New York`<->`San Francisco`
+```
+./build/wakunode2 --relay=true --topic=/waku/2/test --rln-relay=true --rln-relay-dynamic=false --rln-relay-membership-index=3 --nodekey=100a04176710aabdec3258e1b6cdfbbdf602af36ea2311415ae7504bddd86cac --staticnode=/ip4/SANFRANCISCO_IP/tcp/60000/p2p/16Uiu2HAm8zWqrWRp6typPSdL7nqBRGbabH87vmkzN6A3McaGDj3C
+
+```
+
+Connect `Frankfurt`<->`NewYork`
+```
+./build/wakunode2 --relay=true --topic=/waku/2/test --rln-relay=true --rln-relay-dynamic=false --rln-relay-membership-index=4 --nodekey=eb131c2ee17807042f5051b6d7b9fbbbdc83369f28315157d8401fa13bf2b88f --staticnode=/ip4/NEW_YORK_IP/tcp/60000/p2p/16Uiu2HAmJdukvEFU1LhCQHGNcFviWMJh95PU4vMoun2uUvWtaWQL
+```
+
+
+Now you can inject a message via the `rest` API of the node in `Singapore`. This message will travel all the way to `Frankfurt` in 4 hops.
+```
+curl -X POST "http://SINGAPORE_IP:8645/relay/v1/messages/%2Fwaku%2F2%2Ftest" \
+ -H "content-type: application/json" \
+ -d '{"payload":"dontcare","contentTopic":"string"}'
+```
+
+If you check the logs of every machine, you will find the timestamp of when each node received the message.
+
+