Combines five dep-and-build changes that all flow from the libp2p v2.0.0
upgrade and the move to the extracted libp2p_mix / mix-rln plugin stack:
waku.nimble:
* libp2p: ff8d51857 -> c43199378 (release/v2.0.0 tip; sha-pinned until
vacp2p cuts a v2.0.0 tag).
* Drop the bare `zlib < 0.2` cap — no longer needed by the upgraded
libp2p.
* websock: bare ">= 0.4.0" — replaces the d4cd68b URL+SHA workaround
that pinned through a libp2p commit-specific websock SHA.
* nim-json-rpc: switch to chaitanyaprem/nim-json-rpc#f05fad25 — relaxes
websock cap to allow >=0.4.0. TODO: revert to status-im/nim-json-rpc
once status-im/nim-json-rpc#277 merges and a tag is cut.
* lsquic: bare ">= 0.4.1" (drops URL form).
* Add mix-rln-spam-protection-plugin pin (23b278b4) and nim-libp2p-mix
pin (50c4ab4f — PR #14 HEAD); the plugin pins the same libp2p_mix
SHA so the diamond dep collapses to a single source.
waku/factory/waku.nim:
* Explicit HPService.setup(switch) / AutonatService.setup(switch)
calls. libp2p v2.0.0's Service lifecycle refactor (libp2p#2462)
removed switch.start's auto-setup loop, so any caller that assigns
directly to switch.services (we do) is responsible for calling
setup() themselves. Without it, AutonatService.addressMapper stays
nil and peerInfo.expandAddrs SIGSEGVs during start(). Wrapped in
try/except for ServiceSetupError so a setup failure surfaces as a
logged error rather than a crash.
Build / scripts:
* scripts/build_rln_mix.sh removed and Makefile simplified — librln
is now a single shared archive built from zerokit's `stateless`
features (no separate librln_mix archive).
* simulations/mixnet/build_setup.sh + setup_credentials.nim updated
to use librln_v2.0.2.a directly and run RLN keystore setup before
nodes start.
Validated:
* Cold local-cache nimble setup --localdeps -y.
* wakunode2 and chat2mix link cleanly.
* Mixnet roundtrip sim: [PASS] bob received message from alice.
* RLN proof generation + verification on every in-path mix node:
5 gen_called == 5 verified, 0 SPAM_PROOF_* errors.
* persistency: per-job SQLite-backed storage layer (singleton, brokered)
Adds a backend-neutral CRUD library at waku/persistency/, plus the
nim-brokers dependency swap that enables it.
Architecture (ports-and-adapters):
* Persistency: process-wide singleton, one root directory.
* Job: one tenant, one DB file, one worker thread, one BrokerContext.
* Backend: SQLite via waku/common/databases/db_sqlite. Uniform schema
kv(category BLOB, key BLOB, payload BLOB) PRIMARY KEY (category, key)
WITHOUT ROWID, WAL mode.
* Writes are fire-and-forget via EventBroker(mt) PersistEvent.
* Reads are async via five RequestBroker(mt) shapes (KvGet, KvExists,
KvScan, KvCount, KvDelete). Reads return Result[T, PersistencyError].
* One storage thread per job; tenants isolated by BrokerContext.
Public surface (waku/persistency/persistency.nim):
Persistency.instance(rootDir) / Persistency.instance() / Persistency.reset()
p.openJob(id) / p.closeJob(id) / p.dropJob(id) / p.close()
p.job(id) / p[id] / p.hasJob(id)
Writes (Job form & string-id form, fire-and-forget):
persist / persistPut / persistDelete / persistEncoded
Reads (Job form & string-id form, async Result):
get / exists / scan / scanPrefix / count / deleteAcked
Key & payload encoding (keys.nim, payload.nim):
* encodePart family + variadic key(...) / payload(...) macros +
single-value toKey / toPayload.
* Primitives: string and openArray[byte] are 2-byte BE length + bytes;
int{8..64} are sign-flipped 8-byte BE; uint{16..64} are 8-byte BE;
bool/byte/char are 1 byte; enums are int64(ord(v)).
* Generic encodePart[T: tuple | object] recurses through fields() so
any composite Nim type is encodable without ceremony.
* Stable across Nim/C compiler upgrades: no sizeof, no memcpy, no
cast on pointers, no host-endianness dependency.
* `rawKey(bytes)` + `persistPut(..., openArray[byte])` let callers
bypass the built-in encoder with their own format (CBOR, protobuf...).
Lifecycle:
* Persistency.new is private; Persistency.instance is the only public
constructor. Same rootDir is idempotent; conflicting rootDir is
peInvalidArgument. Persistency.reset for test/restart paths.
* openJob opens-or-creates the per-job SQLite file; an existing file
is reused with its data preserved.
* Teardown integration: Persistency.instance registers a Teardown
MultiRequestBroker provider that closes all jobs and clears the
singleton slot when Waku.stop() issues Teardown.request.
Internal layering:
types.nim pure value types (Key, KeyRange, KvRow, TxOp,
PersistencyError)
keys.nim encodePart primitives + key(...) macro
payload.nim toPayload + payload(...) macro
schema.nim CREATE TABLE + connection pragmas + user_version
backend_sqlite.nim KvBackend, applyOps (single source of write SQL),
getOne/existsOne/deleteOne, scanRange (asc/desc,
half-open ranges, open-ended stop), countRange
backend_comm.nim EventBroker(mt) PersistEvent + 5 RequestBroker(mt)
declarations; encodeErr/decodeErr boundary helpers
backend_thread.nim startStorageThread / stopStorageThread (shared
allocShared0 arg, cstring dbPath, atomic
ready/shutdown flags); per-thread provider
registration
persistency.nim Persistency + Job types, singleton state, public
facade
../requests/lifecycle_requests.nim
Teardown MultiRequestBroker
Tests (69 cases, all passing):
test_keys.nim sort-order invariants (length-prefix strings,
sign-flipped ints, composite tuples, prefix
range)
test_backend.nim round-trip / replace / delete-return-value /
batched atomicity / asc-desc-half-open-open-
ended scans / category isolation / batch
txDelete
test_lifecycle.nim open-or-create rootDir / non-dir collision /
reopen across sessions / idempotent openJob /
two-tenant parallel isolation / closeJob joins
worker / dropJob removes file / acked delete
test_facade.nim put-then-get / atomic batch / scanPrefix
asc/desc / deleteAcked hit-miss /
fire-and-forget delete / two-tenant facade
isolation
test_encoding.nim tuple/named-tuple/object keys, embedded Key,
enum encoding, field-major composite sort,
payload struct encoding, end-to-end struct
round-trip through SQLite
test_string_lookup.nim peJobNotFound semantics / hasJob / subscript /
persistPut+get via id / reads short-circuit /
writes drop+warn / persistEncoded via id /
scan parity Job-ref vs id
test_singleton.nim idempotent same-rootDir / different-rootDir
rejection / no-arg instance lifecycle / reset
retargets / reset idempotence / Teardown.request
end-to-end
Prerequisite delivered in the same series: replace the in-tree broker
implementation with the external nim-brokers package; update all
broker call-sites (waku_filter_v2, waku_relay, waku_rln_relay,
delivery_service, peer_manager, requests/*, factory/*, api tests, etc.)
to the new package API; chat2 made to compile again.
Note: SDS adapter (Phase 5 of the design) is deferred -- nim-sds is
still developed side-by-side and the persistency layer is intentionally
SDS-agnostic.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* persistency: pin nim-brokers by URL+commit (workaround for stale registry)
The bare `brokers >= 2.0.1` form cannot resolve on machines where the
local nimble SAT solver enumerates only the registry-recorded 0.1.0 for
brokers. The nim-lang/packages entry for `brokers` carries no per-tag
metadata (only the URL), so until that registry entry is refreshed the
SAT solver clamps the available-versions list to 0.1.0 and rejects the
>= 2.0.1 constraint -- even though pkgs2 and pkgcache both have v2.0.1
cloned locally.
Pinning by URL+commit bypasses the registry path entirely. Inline
comment in waku.nimble documents the situation and the path back to
the bare form once nim-lang/packages is updated.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* persistency: nph format pass
Run `nph` on all 57 Nim files touched by this PR. Pure formatting:
17 files re-styled, no semantic change. Suite still 69/69.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* Fix build, add local-storage-path config, lazy init of Persistency from Waku start
* fix: fix nix deps
* fixes for nix build, regenerate deps
* reverting accidental dependency changes
* Fixing deps
* Apply suggestions from code review
Co-authored-by: Ivan FB <128452529+Ivansete-status@users.noreply.github.com>
* persistency tests: migrate to suite / asyncTest / await
Match the in-tree test convention (procSuite -> suite, sync test +
waitFor -> asyncTest + await):
- procSuite "X": -> suite "X":
- For tests doing async work: test -> asyncTest, waitFor -> await.
- Poll helpers (proc waitFor(t: Job, ...) in test_lifecycle.nim,
proc waitUntilExists(...) in test_facade.nim and
test_string_lookup.nim) -> Future[bool] {.async.}, internal
`waitFor X` -> `await X`, internal `sleep(N)` ->
`await sleepAsync(chronos.milliseconds(N))`.
- Renamed test_lifecycle.nim's helper proc from `waitFor(t: Job, ...)`
-> `pollExists(t: Job, ...)`; the previous name shadowed
chronos.waitFor in the chronos macro expansion.
- `chronos.milliseconds(N)` explicitly qualified because `std/times`
also exports `milliseconds` (returning TimeInterval, not Duration).
- `check await x` -> `let okN = await x; check okN` to dodge chronos's
"yield in expr not lowered" with await-as-macro-argument.
- `(await x).foo()` -> `let awN = await x; ... awN.foo() ...` for the
same reason.
waku/persistency/persistency.nim: nph also pulled the proc signatures
across multiple lines; restored explicit `Future[void] {.async.}`
return types after the colon (an intermediate nph pass had elided them).
Suite: 71 / 71 OK against the new async write surface.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* use idiomatic valueOr instead of ifs
* Reworked persistency shutdown, remove not necessary teardown mechanism
* Use const for DefaultStoragePath
* format to follow coding guidelines - no use of result and explicit returns - no functional change
---------
Co-authored-by: Claude Opus 4.7 <noreply@anthropic.com>
Co-authored-by: Ivan FB <128452529+Ivansete-status@users.noreply.github.com>
* Introduce api/send
Added events and requests for support.
Reworked delivery_monitor into a featured devlivery_service, that
- supports relay publish and lightpush depending on configuration but with fallback options
- if available and configured it utilizes store api to confirm message delivery
- emits message delivery events accordingly
prepare for use in api_example
* Fix edge mode config and test added
* Fix some import issues, start and stop waku shall not throw exception but return with result properly
* Utlize sync RequestBroker, adapt to non-async broker usage and gcsafe where appropriate, removed leftover
* add api_example app to examples2
* Adapt after merge from master
* Adapt code for using broker context
* Fix brokerCtx settings for all usedbrokers, cover locked node init
* Various fixes upon test failures. Added initial of subscribe API and auto-subscribe for send api
* More test added
* Fix multi propagate event emit, fix fail send test case
* Fix rebase
* Fix PushMessageHandlers in tests
* adapt libwaku to api changes
* Fix relay test by adapting publish return error in case NoPeersToPublish
* Addressing all remaining review findings. Removed leftovers. Fixed loggings and typos
* Fix rln relay broker, missed brokerCtx
* Fix rest relay test failed, due to publish will fail if no peer avail
* ignore anvil test state file
* Make terst_wakunode_rln_relay broker context aware to fix
* Fix waku rln tests by having them broker context aware
* fix typo in test_app.nim
* chore: do not mount lightpush without relay (fixes#2808)
- Change mountLightPush signature to return Result[void, string]
- Return error when relay is not mounted
- Update all call sites to handle Result return type
- Add test verifying mounting fails without relay
- Only advertise lightpush capability when relay is enabled
* chore: don't mount legacy lightpush without relay
* update rendezvous to work with WakuPeeRecord and use libp2p updated version
* split rendezvous client and service implementation
* mount rendezvous client by default
* Rename waku_api to rest_api and underlying rest to endpoint for clearity
* Rename node/api to node/kernel_api to suggest that it is an internal accessor to node interface + make everything compile after renaming
* make waku api a top level import
* fix use of relative path imports and use default to root rather in case of waku and tools modules
* Adding waku canary test scripts
* Update README file
note: The real author of this commit is Aya. I just resubmitted her PR after a deep nwaku history cleanup
---------
Co-authored-by: aya <ayahassan2877@gmail.com>
* introduce createNode
# Conflicts:
# apps/wakunode2/cli_args.nim
* remove confutils dependency on the library
* test: remove websocket in default test config
* update to latest specs
* test: cli_args
* align to spec changes (sovereign, message conf, entrypoints
* accept enr, entree and multiaddr as entry points
* post rebase
* format
* change from "sovereign" to "core"
* add example
* get example to continue running
* nitpicks
* idiomatic constructors
* fix enum naming
* replace procs with consts
* remove messageConfirmation
* use pure enum
* rename example file
* fix libpcre installation in Dockerfile for debian:stable-slim
Seems with debian:stable-slim now points to Debian Bookworm and that made libpcre3 deprecated we have a failing docker build.
* remove libpcre3 dependency completely as we dont use Nims std/re regex lib.
* Remove all remaining reference to pcre library in our image builds
* chore: use type for rate limit config
Use type instead of `seq[string]` for rate limit config earlier.
Enables to fail faster (at config time) if the string is malformated
Also enables using object in some scenarios.
* test: remove import warnings
* improve naming and add tests
* Reserve `networkconfig` name to waku network related settings
* Rename cluster conf to network conf
A `NetworkConf` is a Waku network configuration.
# Conflicts:
# tests/factory/test_waku_conf.nim
# Conflicts:
# tests/factory/test_waku_conf.nim
* Improve sharding configuration
A smarter data types simplifies the logic.
* Fixing tests
* fixup! rename to endpointConf
* wip: autosharding is a specific configuration state and treat it like
it
# Conflicts:
# waku/factory/external_config.nim
* refactor lightpush handler
some metrics error reporting were missing
# Conflicts:
# waku/waku_lightpush/protocol.nim
* test_node_factory tests pass
* remove warnings
* fix tests
* Revert eager previous replace-all command
* fix up build tools compilation
* metadata is used to store cluster id
* Mount relay routes in static sharding
* Rename activeRelayShards to subscribeShards
To make it clearer that these are the shards the node will subscribe to.
* Remove unused msg var
* Improve error handling
* Set autosharding as default, with 1 shard in network
Also makes shards to subscribe to all shards in auto sharding, none in
static sharding.
* update RLN contract abi functions and procs
* Clean up debugging lines
* Use more descriptive object field names for MembershipInfo
* Fix formatting
* fix group_manager after rebase to use new contract method sig
* Fix linting for group_manager.nim
* Test idcommitment to BE and debug logs
* Improve IdCommitment logging
* Update all keystore credentials to use BE format
* Add workaround for groupmanager web3 eth_call
* Add await to sendEthCallWithChainID
* Add error handling for failed eth_call
* Improve error handling for eth_call workaround
* Revert keystore credentials back to using LE
* Update toRateCommitment proc to use LE instead of BE
* Add IdCommitment to calldata as BE
* feat: Update rln contract deployment and tests (#3408)
* update RLN contract abi functions and procs
* update waku-rlnv2-contract submodule commit to latest
* Add RlnV2 contract deployment using forge scripts
* Clean up output of forge script command, debug logs to trace, warn to error
* Move TestToken deployment to own proc
* first implementation of token minting and approval
* Update rln tests with usermessagelimit new minimum
* Clean up code and error handling
* Rework RLN tests WIP
* Fix RLN test for new contract
* RLN Tests updated
* Fix formatting
* Improve error logs
* Fix error message formatting
* Fix linting
* Add pnpm dependency installation for rln tests
* Update test dependencies in makefile
* Minor updates, error messages etc
* Code cleanup and change some debug logging to trace
* Improve handling of Result return value
* Use absolute path for waku-rlnv2-contract
* Simplify token approval and balance check
* Remove unused Anvil options
* Add additional checks for stopAnvil process
* Fix anvil process call to null
* Add lock to tests for rln_group_manager_onchain
* Debug for forge command
* Verify paths
* Install pnpm as global
* Cleanup anvil running procs
* Add check before installing anvil
* CLean up onchain group_manager
* Add proc to setup environment for contract deployer
* Refactoring and improved error handling
* Fix anvil install directory string
* Fix linting in test_range_split
* Add const for the contract address length
* Add separate checks for why Approval transaction fails
* Update RLN contract address and chainID for TWN
* Upgrade lpt to new config methods
* Make choice of legacy and v3 lightpush configurable on cli
* Adjust runner script to allow easy lightpush version selection
* Prepare selectable lightpush for infra env runs
* Fix misused result vs return
* Fixes and more explanatory comments added
* Fix ~pure virtual~ notice to =discard
* waku_relay protocol fix unsubscribe and remove topic validator
* simplify subscription and avoid unneeded code
* tests adaptations
* call wakuRelay.subscribe only in one place within waku_node
* properly pass userMessageLimit to OnchainGroupManager
* waku.nimble 2.2.4 Nim compiler
* rm stew/shims/net import
* change ValidIpAddress.init with parseIpAddress
* fix serialize for zerokit
* group_manager: separate if statements
* protocol_types: add encode UInt32 with zeros up to 32 bytes
* windows build: skip libunwind build and rm libunwind.a inlcusion step
* bump nph to overcome the compilation issues with 2.2.x
* bump nim-libp2p to v1.10.1
- Add more possible protocols to monitor
- Simplify protocol validation simple algorithm
- Properly pass the shard CLI parameter to the ENR info
- Mount metadata protocol
- Properly use of quit(QuitFailure)
* use of multiple Eth clients instead of just one
* config_chat2 enhance param comment
* group_manager: raise exception if could not connect to any of the eth clients
