Combines five dep-and-build changes that all flow from the libp2p v2.0.0
upgrade and the move to the extracted libp2p_mix / mix-rln plugin stack:
waku.nimble:
* libp2p: ff8d51857 -> c43199378 (release/v2.0.0 tip; sha-pinned until
vacp2p cuts a v2.0.0 tag).
* Drop the bare `zlib < 0.2` cap — no longer needed by the upgraded
libp2p.
* websock: bare ">= 0.4.0" — replaces the d4cd68b URL+SHA workaround
that pinned through a libp2p commit-specific websock SHA.
* nim-json-rpc: switch to chaitanyaprem/nim-json-rpc#f05fad25 — relaxes
websock cap to allow >=0.4.0. TODO: revert to status-im/nim-json-rpc
once status-im/nim-json-rpc#277 merges and a tag is cut.
* lsquic: bare ">= 0.4.1" (drops URL form).
* Add mix-rln-spam-protection-plugin pin (23b278b4) and nim-libp2p-mix
pin (50c4ab4f — PR #14 HEAD); the plugin pins the same libp2p_mix
SHA so the diamond dep collapses to a single source.
waku/factory/waku.nim:
* Explicit HPService.setup(switch) / AutonatService.setup(switch)
calls. libp2p v2.0.0's Service lifecycle refactor (libp2p#2462)
removed switch.start's auto-setup loop, so any caller that assigns
directly to switch.services (we do) is responsible for calling
setup() themselves. Without it, AutonatService.addressMapper stays
nil and peerInfo.expandAddrs SIGSEGVs during start(). Wrapped in
try/except for ServiceSetupError so a setup failure surfaces as a
logged error rather than a crash.
Build / scripts:
* scripts/build_rln_mix.sh removed and Makefile simplified — librln
is now a single shared archive built from zerokit's `stateless`
features (no separate librln_mix archive).
* simulations/mixnet/build_setup.sh + setup_credentials.nim updated
to use librln_v2.0.2.a directly and run RLN keystore setup before
nodes start.
Validated:
* Cold local-cache nimble setup --localdeps -y.
* wakunode2 and chat2mix link cleanly.
* Mixnet roundtrip sim: [PASS] bob received message from alice.
* RLN proof generation + verification on every in-path mix node:
5 gen_called == 5 verified, 0 SPAM_PROOF_* errors.
* persistency: per-job SQLite-backed storage layer (singleton, brokered)
Adds a backend-neutral CRUD library at waku/persistency/, plus the
nim-brokers dependency swap that enables it.
Architecture (ports-and-adapters):
* Persistency: process-wide singleton, one root directory.
* Job: one tenant, one DB file, one worker thread, one BrokerContext.
* Backend: SQLite via waku/common/databases/db_sqlite. Uniform schema
kv(category BLOB, key BLOB, payload BLOB) PRIMARY KEY (category, key)
WITHOUT ROWID, WAL mode.
* Writes are fire-and-forget via EventBroker(mt) PersistEvent.
* Reads are async via five RequestBroker(mt) shapes (KvGet, KvExists,
KvScan, KvCount, KvDelete). Reads return Result[T, PersistencyError].
* One storage thread per job; tenants isolated by BrokerContext.
Public surface (waku/persistency/persistency.nim):
Persistency.instance(rootDir) / Persistency.instance() / Persistency.reset()
p.openJob(id) / p.closeJob(id) / p.dropJob(id) / p.close()
p.job(id) / p[id] / p.hasJob(id)
Writes (Job form & string-id form, fire-and-forget):
persist / persistPut / persistDelete / persistEncoded
Reads (Job form & string-id form, async Result):
get / exists / scan / scanPrefix / count / deleteAcked
Key & payload encoding (keys.nim, payload.nim):
* encodePart family + variadic key(...) / payload(...) macros +
single-value toKey / toPayload.
* Primitives: string and openArray[byte] are 2-byte BE length + bytes;
int{8..64} are sign-flipped 8-byte BE; uint{16..64} are 8-byte BE;
bool/byte/char are 1 byte; enums are int64(ord(v)).
* Generic encodePart[T: tuple | object] recurses through fields() so
any composite Nim type is encodable without ceremony.
* Stable across Nim/C compiler upgrades: no sizeof, no memcpy, no
cast on pointers, no host-endianness dependency.
* `rawKey(bytes)` + `persistPut(..., openArray[byte])` let callers
bypass the built-in encoder with their own format (CBOR, protobuf...).
Lifecycle:
* Persistency.new is private; Persistency.instance is the only public
constructor. Same rootDir is idempotent; conflicting rootDir is
peInvalidArgument. Persistency.reset for test/restart paths.
* openJob opens-or-creates the per-job SQLite file; an existing file
is reused with its data preserved.
* Teardown integration: Persistency.instance registers a Teardown
MultiRequestBroker provider that closes all jobs and clears the
singleton slot when Waku.stop() issues Teardown.request.
Internal layering:
types.nim pure value types (Key, KeyRange, KvRow, TxOp,
PersistencyError)
keys.nim encodePart primitives + key(...) macro
payload.nim toPayload + payload(...) macro
schema.nim CREATE TABLE + connection pragmas + user_version
backend_sqlite.nim KvBackend, applyOps (single source of write SQL),
getOne/existsOne/deleteOne, scanRange (asc/desc,
half-open ranges, open-ended stop), countRange
backend_comm.nim EventBroker(mt) PersistEvent + 5 RequestBroker(mt)
declarations; encodeErr/decodeErr boundary helpers
backend_thread.nim startStorageThread / stopStorageThread (shared
allocShared0 arg, cstring dbPath, atomic
ready/shutdown flags); per-thread provider
registration
persistency.nim Persistency + Job types, singleton state, public
facade
../requests/lifecycle_requests.nim
Teardown MultiRequestBroker
Tests (69 cases, all passing):
test_keys.nim sort-order invariants (length-prefix strings,
sign-flipped ints, composite tuples, prefix
range)
test_backend.nim round-trip / replace / delete-return-value /
batched atomicity / asc-desc-half-open-open-
ended scans / category isolation / batch
txDelete
test_lifecycle.nim open-or-create rootDir / non-dir collision /
reopen across sessions / idempotent openJob /
two-tenant parallel isolation / closeJob joins
worker / dropJob removes file / acked delete
test_facade.nim put-then-get / atomic batch / scanPrefix
asc/desc / deleteAcked hit-miss /
fire-and-forget delete / two-tenant facade
isolation
test_encoding.nim tuple/named-tuple/object keys, embedded Key,
enum encoding, field-major composite sort,
payload struct encoding, end-to-end struct
round-trip through SQLite
test_string_lookup.nim peJobNotFound semantics / hasJob / subscript /
persistPut+get via id / reads short-circuit /
writes drop+warn / persistEncoded via id /
scan parity Job-ref vs id
test_singleton.nim idempotent same-rootDir / different-rootDir
rejection / no-arg instance lifecycle / reset
retargets / reset idempotence / Teardown.request
end-to-end
Prerequisite delivered in the same series: replace the in-tree broker
implementation with the external nim-brokers package; update all
broker call-sites (waku_filter_v2, waku_relay, waku_rln_relay,
delivery_service, peer_manager, requests/*, factory/*, api tests, etc.)
to the new package API; chat2 made to compile again.
Note: SDS adapter (Phase 5 of the design) is deferred -- nim-sds is
still developed side-by-side and the persistency layer is intentionally
SDS-agnostic.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* persistency: pin nim-brokers by URL+commit (workaround for stale registry)
The bare `brokers >= 2.0.1` form cannot resolve on machines where the
local nimble SAT solver enumerates only the registry-recorded 0.1.0 for
brokers. The nim-lang/packages entry for `brokers` carries no per-tag
metadata (only the URL), so until that registry entry is refreshed the
SAT solver clamps the available-versions list to 0.1.0 and rejects the
>= 2.0.1 constraint -- even though pkgs2 and pkgcache both have v2.0.1
cloned locally.
Pinning by URL+commit bypasses the registry path entirely. Inline
comment in waku.nimble documents the situation and the path back to
the bare form once nim-lang/packages is updated.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* persistency: nph format pass
Run `nph` on all 57 Nim files touched by this PR. Pure formatting:
17 files re-styled, no semantic change. Suite still 69/69.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* Fix build, add local-storage-path config, lazy init of Persistency from Waku start
* fix: fix nix deps
* fixes for nix build, regenerate deps
* reverting accidental dependency changes
* Fixing deps
* Apply suggestions from code review
Co-authored-by: Ivan FB <128452529+Ivansete-status@users.noreply.github.com>
* persistency tests: migrate to suite / asyncTest / await
Match the in-tree test convention (procSuite -> suite, sync test +
waitFor -> asyncTest + await):
- procSuite "X": -> suite "X":
- For tests doing async work: test -> asyncTest, waitFor -> await.
- Poll helpers (proc waitFor(t: Job, ...) in test_lifecycle.nim,
proc waitUntilExists(...) in test_facade.nim and
test_string_lookup.nim) -> Future[bool] {.async.}, internal
`waitFor X` -> `await X`, internal `sleep(N)` ->
`await sleepAsync(chronos.milliseconds(N))`.
- Renamed test_lifecycle.nim's helper proc from `waitFor(t: Job, ...)`
-> `pollExists(t: Job, ...)`; the previous name shadowed
chronos.waitFor in the chronos macro expansion.
- `chronos.milliseconds(N)` explicitly qualified because `std/times`
also exports `milliseconds` (returning TimeInterval, not Duration).
- `check await x` -> `let okN = await x; check okN` to dodge chronos's
"yield in expr not lowered" with await-as-macro-argument.
- `(await x).foo()` -> `let awN = await x; ... awN.foo() ...` for the
same reason.
waku/persistency/persistency.nim: nph also pulled the proc signatures
across multiple lines; restored explicit `Future[void] {.async.}`
return types after the colon (an intermediate nph pass had elided them).
Suite: 71 / 71 OK against the new async write surface.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* use idiomatic valueOr instead of ifs
* Reworked persistency shutdown, remove not necessary teardown mechanism
* Use const for DefaultStoragePath
* format to follow coding guidelines - no use of result and explicit returns - no functional change
---------
Co-authored-by: Claude Opus 4.7 <noreply@anthropic.com>
Co-authored-by: Ivan FB <128452529+Ivansete-status@users.noreply.github.com>
* refactor retention policy to allow union of several retention policies
* bug fix time retention policy
* add removal of orphan partitions if any
* use nim-http-utils 0.4.1
* SubscriptionManager tracks shard and content topic interest
* RecvService emits MessageReceivedEvent on subscribed content topics
* Route MAPI through old Kernel API relay unique-handler infra to avoid code duplication
* Encode current gen-zero network policy: on Core node boot, subscribe to all pubsub topics (all shards)
* Add test_api_subscriptions.nim (basic relay/core testing only)
* Removed any MAPI Edge sub/unsub/receive support code that was there (will add in next PR)
* Hook MessageSeenEvent to Kernel API bus
* Fix MAPI vs Kernel API unique relay handler support
* RecvService delegating topic subs to SubscriptionManager
* RecvService emits MessageReceivedEvent (fully filtered)
* Rename old SubscriptionManager to LegacySubscriptionManager
* Introduce api/send
Added events and requests for support.
Reworked delivery_monitor into a featured devlivery_service, that
- supports relay publish and lightpush depending on configuration but with fallback options
- if available and configured it utilizes store api to confirm message delivery
- emits message delivery events accordingly
prepare for use in api_example
* Fix edge mode config and test added
* Fix some import issues, start and stop waku shall not throw exception but return with result properly
* Utlize sync RequestBroker, adapt to non-async broker usage and gcsafe where appropriate, removed leftover
* add api_example app to examples2
* Adapt after merge from master
* Adapt code for using broker context
* Fix brokerCtx settings for all usedbrokers, cover locked node init
* Various fixes upon test failures. Added initial of subscribe API and auto-subscribe for send api
* More test added
* Fix multi propagate event emit, fix fail send test case
* Fix rebase
* Fix PushMessageHandlers in tests
* adapt libwaku to api changes
* Fix relay test by adapting publish return error in case NoPeersToPublish
* Addressing all remaining review findings. Removed leftovers. Fixed loggings and typos
* Fix rln relay broker, missed brokerCtx
* Fix rest relay test failed, due to publish will fail if no peer avail
* ignore anvil test state file
* Make terst_wakunode_rln_relay broker context aware to fix
* Fix waku rln tests by having them broker context aware
* fix typo in test_app.nim
* chore: do not mount lightpush without relay (fixes#2808)
- Change mountLightPush signature to return Result[void, string]
- Return error when relay is not mounted
- Update all call sites to handle Result return type
- Add test verifying mounting fails without relay
- Only advertise lightpush capability when relay is enabled
* chore: don't mount legacy lightpush without relay
* Rename waku_api to rest_api and underlying rest to endpoint for clearity
* Rename node/api to node/kernel_api to suggest that it is an internal accessor to node interface + make everything compile after renaming
* make waku api a top level import
* fix use of relative path imports and use default to root rather in case of waku and tools modules
