Also, in `dapps/tests/contracts` move the `this.timeout(0);` inside the
`it(...)` for the expensive gas esimation (involving
`SimpleStorage.methods.set`) because it otherwise doesn't seem to have an
effect on the default 15 second timeout.
Remove the `<12.0.0` restriction re: Node.js version in the `"engines"`
settings for all the packages in the monorepo that had that restriction.
Add missing `"engines"` settings in `packages/plugins/snark/package.json`.
Adjust the Azure Pipelines config to include builds for Node.js v12.x and
v13.x.
Bump `solc` to `0.4.26` in `dapps/tests/app` and `dapps/tests/contracts`. It
was discovered that older versions suffered a fatal `Maximum call stack size
exceeded` error when run on Windows with Node.js v12.x or newer. Display a
warning re: the bad combo (solc version + Windows + Node version) if it's
detected at runtime.
Adjust the root `yarn.lock` so that the `sha3` transitive dependency resolves
to a newer version that is compatible with Node v13.x.
This commit adds two new configuration settings for Smart Contract configuration:
- `interfaces` - Any Smart Contract that represent an interface or is used for inheritance
- `libraries` - Any Smart Contract that is used as a library
This makes the configuration less redundant in cases where otherwise the `deploy`
property has been set to `false`, such as:
```
deploy: {
Ownable: {
deploy: false
},
...
}
```
The above can now be done via:
```
interfaces: ['Ownable'],
deploy: {
...
}
```
## Problem
When using `embark test —node=embark` with the test app, the test that listens for contract events would always fail after timing out. Funnily enough, after the timeout, the subsequent test would run, executing a method that would ulimately fire the event listened for in the previous test, causing the second test to fail as well.
## Solution (workaround)
Update the contract events listener test in the test app to execute the `set2` method twice, successfully working around the issue.
## NOTES
The cause of the issue is unknown and why the workaround works is also unknown.
This change works with both `embark test` and `embark test —node=embark`.
This commit introduces a new `global.getEvmVersion()` that can be used to
conditionally run tests, such as when tests rely on RPC APIs that are only
available in specific evm nodes.
For the test DApp, when ENS is enabled, ENS controls were not showing in Cockpit (under Utils), nor were they available to test in the DApp interface as they did not exist.
Fix ENS controls not showing in Cockpit when enabled.
Add ENS tab to Test DApp for ENS UI.
During `embark test`, the contracts dapp was throwing an error:
```
connection not open on send()
Error: Invalid JSON RPC response: ""
at Object.InvalidResponse (/Users/michael/repos/embark/node_modules/web3-core-helpers/src/errors.js:42:16)
at XMLHttpRequest.request.onreadystatechange (/Users/michael/repos/embark/node_modules/web3-providers-http/src/index.js:92:32)
at XMLHttpRequestEventTarget.dispatchEvent (/Users/michael/repos/embark/node_modules/xhr2-cookies/xml-http-request-event-target.ts:44:13)
at XMLHttpRequest._setReadyState (/Users/michael/repos/embark/node_modules/xhr2-cookies/xml-http-request.ts:219:8)
at XMLHttpRequest._onHttpRequestError (/Users/michael/repos/embark/node_modules/xhr2-cookies/xml-http-request.ts:379:8)
at ClientRequest.<anonymous> (/Users/michael/repos/embark/node_modules/xhr2-cookies/xml-http-request.ts:266:37)
at ClientRequest.emit (events.js:198:13)
at Socket.socketErrorListener (_http_client.js:392:9)
at Socket.emit (events.js:198:13)
at emitErrorNT (internal/streams/destroy.js:91:8)
at emitErrorAndCloseNT (internal/streams/destroy.js:59:3)
at process._tickCallback (internal/process/next_tick.js:63:19)
(node:75120) UnhandledPromiseRejectionWarning: Error: Provider not set or invalid
...
```
This was due to the fact that during testing, the Ganache VM **provider** is used as the blockchain node, instead of spinning up an instance of Ganache. Due to this, there is no HTTP nor WebSockets RPC endpoint opened on the VM node, and the contracts dapp was not able to connect to the node during tests.
Add `$EMBARK` to the contract config’s `dappConnection` list, so that the contract test dapp can successfully connect to Embark’s proxy, which ultimately communicates with the Ganache VM.
As a side note, without `$EMBARK` in the `dappConnection` list, the tests could run successfully when using `embark test —node=embark`. This succeeds because the geth node exposes the RPC WebSockets endpoint that the contracts app connects to on `ws://localhost:8546`.
This PR replaces #2057.
Implement a collective typecheck action that can be invoked in the root of the
monorepo with `yarn typecheck` or in watch-mode with `yarn watch:typecheck`.
Include the watch-mode typecheck action as part of `yarn start` (a.k.a
`yarn watch`).
To activate collective typecheck for a package in the monorepo, its
`package.json` file should specify:
```
{
"embark-collective": {
"typecheck": true
}
}
```
*-or-*
```
{
"embark-collective": {
"typecheck": {...}
}
}
```
Where `{...}` above is a `tsconfig.json` fragment that will be merged into the
config generated for the package according the same rules that `tsc` applies
when merging [configs][config].
When collective typecheck begins, it generates a `tsconfig.json` for the root
of the monorepo and for each package that is activated for the action. If the
generated JSON is different than what's on disk for the respective root/package
config, or if the config is not present on disk, then it will be
written. Changes to generated `tsconfig.json` files should be committed; such
changes will arise when there are structural changes to the monorepo, e.g. a
package is added, removed, moved and/or the directory containing it is
renamed. Since the configs are only generated at the beginning of collective
typecheck, when structural changes are made in the monorepo `yarn typecheck`
(or `yarn start` or `yarn watch:typecheck`) should be restarted.
Nearly all of the packages in the monorepo (i.e. all those for which it makes
sense) have been activated for collective typecheck. Even those packages that
don't contain `.ts` sources are activated because `tsc` can make better sense
of the code base as a whole owing to the project references included in the
generated `tsconfig.json` files. Also, owing to the fully cross-referenced
`tsconfig.json` files, it's possible for `tsc` to type check the whole code
base without babel (`yarn build` or `yarn watch:build`) having been run
beforehand.
**NOTE** that a *"cold typecheck"* of the whole monorepo is resource intensive:
on this author's 2019 MacBook Pro it takes around three minutes, the fans spin
up, and `tsc` uses nearly 0.5 GB of RAM. However, once a full typecheck has
completed, the next full typecheck will complete in a few seconds or less; and
when running in watch-mode there is likewise a *big* speedup once a full
typecheck has completed, whether that full check happened before it's running
in watch-mode or when watch-mode itself resulted in a full check before
switching automatically to incremental check, as well a corresponding *big*
reduction in resource consumption. A full check will be needed any time
`yarn typecheck` (or `yarn start` or `yarn watch:typecheck`) is run in a fresh
clone plus `yarn install`, or after doing `yarn reboot[:full]` or `yarn reset`.
The combination of options in each generated package-level `tsconfig.json` and
the root `tsconfig.base.json` result in `tsc` writing `.d.ts` files (TypeScript
declaration files) into the `dist/` directory of each package. That
output is intended to live side-by-side with babel's output, and therefore the
`"rootDir"` option in each generated config is set to `"./src"`.
In projects activated for collective typecheck, `.js` may be converted to `.ts`
and/or `.ts` sources may be added without any additional changes needed in
package-level `package.json`.
---
Reorganize types in `packages/core/typings` (a.k.a `@types/embark`) into
`packages/core/core` (`embark-core`), refactor other packages' imports
accordingly, and delete `packages/core/typings` from the monorepo. This results
in some similarly named but incompatible types exported from `embark-core`
(e.g. `Events` and `EmbarkEvents`, the latter being the one from
`packages/core/typings`); future refactoring should consolidate those types. To
avoid circular dependency relationships it's also necessary to split out
`Engine` from `embark-core` into its own package (`embark-engine`) and to
introduce a bit of duplication, e.g. the `Maybe` type that's now defined in
both `embark-i18n` and `embark-core`.
In the process of the types reorg, move many dependencies spec'd in various
`package.json` to the `package.json` of the package/s that actually depend on
them, e.g. many are moved from `packages/embark/package.json` to
`packages/core/engine/package.json`. Related to those moves, fix some Node.js
`require`-logic related to bug-prone dependency resolution.
Fix all type errors that appeared as a result of activating collective
typecheck across the whole monorepo.
Reactivate `tslint` in `packages/core/core` and fix the remaining linter errors.
Tidy up and add a few items in the root `package.json` scripts.
Bump lerna from `3.16.4` to `3.19.0`.
Bumpt typescript from `3.6.3` to `3.7.2`.
Bumpt tslint from `5.16.0` to `5.20.1`.
Make various changes related to packages' `import`/`require`ing packages that
weren't spec'd in their respective `package.json`. More refactoring is needed
in this regard, but changes were made as the problems were observed in the
process of authoring this PR.
[config]: https://www.typescriptlang.org/docs/handbook/tsconfig-json.html
Improve the reliability of the expiration unit test in the test dapp by explicitly setting the `block.timestamp` and comparing an expiration value against that.
This improves on the current implementation that relies on time passed which varies depending on the speed of unit tests run (CPU speed, logs shown, etc).
When `eth_unsubscribe` is received in the proxy, ensure this request is forwarded through on the correct socket (the same socket that was used for the corresponding `eth_subscribe`).
Move subscription handling for `eth_subscribe` and `eth_unsubscribe` to RpcModifiers (in `rpc-manager` package).
For each `eth_subscribe` request, a new `RequestManager` is created. Since the endpoint property on the proxy class was updated to be a provider, the same provider was being assigned to each new `RequestManager` and thus creating multiple event handlers for each subscription created. To circumvent this, we are now creating a new provider for each `RequestManager`.
Co-authored-by: Pascal Precht <pascal.precht@googlemail.com>
BREAKING CHANGE:
Related to #1985. Prior to Embark's minimum supported version of Node.js being
bumped to to 10.17.0, Embark was incompatible with any relatively recent
release of the `ipfs-http-client` package.
While *internal* changes are needed re: ipfs's `Buffer` export for
e.g. `embark_demo` to function correctly *(and this PR makes those changes)*,
Embark otherwise runs/tests okay.
Keep in mind #2033.
However, if a dApp author were to explicitly `require('ifps-api')` in the
front-end that wouldn't work as before; and swapping `"ipfs-http-client"` for
`"ipfs-api"` might also not be enough — there are API changes that dApp authors
would need to consider, regardless of Embark presently supplying the dependency
and EmbarkJS wrapping around it.
Closes#1994.
This commit fixes the issue that it wasn't possible anymore to use named constructor arguments
in Smart Contract configurations.
For example, the following Smart Contract expects two constructor arguments:
```solidity
contract SomeContract {
constructor(address[] _addresses, int initialValue) public {}
}
```
The first being a list of addresses, the second one a number. This can be configured as:
```js
SomeContract: {
args: [
["$MyToken2", "$SimpleStorage"],
123
]
}
```
Notice how the order of arguments matters here. `_addresses` come first in the constructor,
so they have to be defined first in the configuration as well.
Another way to configure this is using named arguments, which is what's broken prior to this commit:
```js
SomeContract: {
args: {
initialValue: 123,
_addresses: ["$MyToken2", "$SimpleStorage"]
}
}
```
Using a notation like this ^ the order no longer matters as Embark will figure out the right
values for the constructor arguments by their names.
The reason this is broken is because there are several modules in Embark that register and
run a `deployment:contract:beforeDeploy` action, which are allowed to mutate this configuration
object. One of those modules is the `ens` module, which searches for ENS names in the arguments
and figure out whether it has to replace it with a resolved address.
One thing that particular module didn't take into account is that `args` could be either and
array, or an object and will always return an array, changing the shape of `args` in case it was
an object.
This is a problem because another module, `ethereum-blockchain-client`, another action is registered
that takes this mutated object in `determineArguments()` and ensure that, if `args` is actually an
object, the values are put in the correct position matching the constructor of the Smart Contract in
question.
One way to solve this was to use the newly introduced [priority](https://github.com/embark-framework/embark/pull/2031) and ensure
that `ens` action is executed after `ethereum-blockchain-client`'s.
However, the actual bug here is that the ENS module changes the shape of `args` in the first place,
so this commit ensures that it preserves it.
Those had been removed in a refactor while the Smart Contract sources have been
kept around, resulting in deployment errors as Embark doesn't know what to do
with the Smart Contracts that don't come with a dedicated config.
This commit re-adds the configurations to make the deployment pass again.
* refactor(@embark/dapps/tests/app): use function syntax
These changes don't fix the race conditions related to the test dapp's tests
but are a step in the right direction.
* refactor(@embark/dapps/tests/contracts): adjustments to get tests passing
Further refactoring is needed re: potentially duplicated or overlapping logic
in `packages/plugins/solidity-tests` and
`packages/core/utils/src/solidity/remapImports.ts`, as well in disabled test
dapp tests
* test(dapps/tests/app): temporarily disable intermittently failing tests
They are failing because of a race condition; once that race condition has been
fixed these tests should be reenabled.
* fix(@embark/solidity-tests): fix importing the library for the tests
Fix a lot of bugs and reenable a couple of modules
Some tests were kept disabled, mostly the ENS and EmbarkJS tests
Those need to add back a fairly significant feature to work
Add back missing solidity contracts
* fix: fix tests hanging because the console is not started
* fix(@embark/proxy): send back errors correctly to the client
Code originally by @emizzle and fixed by me
* feat(@embark/test-runner): add assert.reverts to test reverts
* fix: make test app actually run its test and not hang
* fix(@embark/proxy): fix listening to contract event in the proxy
* feat(@embark/test-runner): add assertion for events being triggered
* docs(@embark/site): add docs for the new assert functions
* feat(@embark/test-runner): add increaseTime util function to globals
* docs(@embark/site): add docs for increaseTime
* fix: fix test-app, contracts index file and reload on change
* fix(@embark/cmd_controller): fix missing nodes
Was removed by accident
* feat(@embark/demo): add favicon to embark demo
* chore(@embark/cockpit): change favicon to new Embark logo
* fix(@embark/embarkjs-ens): fix ENS config for embarkjs-ens
* remove comments
* fix embarkjs generation
fix ens setProvider
fix embarkjs objects
fix generated embarkjs provider
generate contracts
fix embarkjs-ens
* address some of the issues in the code review
* address some of the issues in the code review
* address some of the issues in the code review
* address some of the issues in the code review
Upgrade all dependencies on web3/web3-* v1.0.0-beta.37 to v1.2.1.
Make various adjustments related to the previous convention of
`"web3": "1.0.0-beta"` in `embark.json` signifying that embark's own web3
dependency should be used in dapp builds.
Fix bugs in library manager, including a switch from using the
live-plugin-manager package to using npm in a child process to install
`"versions"` dependencies specified in `embark.json` when a specified version
doesn't match up with embark's own version for that package.
Avoid race conditions when installing `"versions"` by completing all installs
prior to starting other services. If an install fails, then after all the
installs have completed or failed the embark command will exit with error.
Change various comments and update docs to reflect the new default of web3
v1.2.1.
Effectively deprecate the `embarkjs-connector-web3` package but don't introduce
a breaking change by simply not loading the plugin if it's specified in a
DApp's `embark.json`. If the deprecated plugin is specified, display a message
indicating the plugin was ignored and suggesting it be removed from the
project's `embark.json` and `package.json`.
This commit has been originally cherry-picked from d0d89fc5ae and
slightly modified to update all packages, as meanwhile, new packages have been added to `master`.
The reason this commit is cherry-picked from `4.0.x` branch is because
it wasn't created from `master`.
Purpose is mainly to update `CHANGELOG` and get the package versions in sync again.
Contract app hangs when attempting to test the solc contract in the test folder.
There were several causes:
1. The test contract needed a referenced contract path updated
2. Contracts that had been compiled in the JS tests were being deleted at the end of the JS test run, which caused errors with the files not being found. The fix was to reset the contracts config to no longer require the non-test contracts to be compiled/deployed.
3. Contract filtering was attempting to filter on a property `filename` that must have been changed to `originalFilename` at some point and therefore was not filtering properly.
4. The accounts used by the contract deployer were getting overwritten when `SolcTest` was instantiated and thus preventing the `remix_tests` `Assert` library from getting deployed.
Make changes by running these commands in the root of the monorepo:
**bugs**
```shell
npx lerna exec --concurrency 1 --stream -- \
'DIRPATH=$(realpath $PWD --relative-to=$LERNA_ROOT_PATH); \
npx json -I -f package.json -e "this.bugs=\
\"https://github.com/embark-framework/embark/issues\""'
```
**homepage**
```shell
npx lerna exec --concurrency 1 --stream -- \
'DIRPATH=$(realpath $PWD --relative-to=$LERNA_ROOT_PATH); \
npx json -I -f package.json -e "this.homepage=\
\"https://github.com/embark-framework/embark/tree/master/${DIRPATH}#readme\""'
```
Don't commit changes to private packages, with the exceptions of embark-typings
and embark-reset because those may switch from private to public, and also
because the latter will be included in `node_modules` of embark even if it is
private since embark-reset is presently a bundled dependency of embark.
Don't include the homepage and bugs fields in dapps generated from the template
packages, except for the demo. Set those dapps' description field to an empty
string.
Ensure every package (inc. private packages) has a description.
Ensure every package (inc. private packages) has a README that begins with:
```markdown
`[pkgJson.name]`
================
> [pkgJson.description]
Visit [embark.status.im](https://embark.status.im/) to get started with
[Embark](https://github.com/embark-framework/embark).
```
Don't include the README in dapps generated from the template packages, except
for the demo.
Previously, templates were in a subdirectory of `packages/embark`. Reorganize
them so that they are member packages of the monorepo. This allows them to
cleanly depend on other members of the monorepo,
e.g. `embarkjs-connector-web3`.
It is desirable for the templates, in the context of the monorepo, to specify
embark as a dependency, to take advantage of `npx embark test` (and it's a
"forward looking" setup re: how we plan to evolve embark). However, if embark
were to specify the template packages as dependencies a circular relationship
would be introduced, which is [unsupported by Lerna][circular]. Therefore,
revise the template generator so that all templates are resolved / fetched at
runtime, i.e. `boilerplate`, `demo`, and `simple` are no longer
"built-ins" *per se*. This change won't be apparent to embark's users, but it
does mean that the template generator won't work (in a production install of
embark) if it can't connect to the npm registry, i.e. when the user runs
`embark demo` or `embark new [--simple]`. When embark is inside the monorepo,
templates are resolved and copied from the yarn workspace rather than being
fetched from the registry, which is convenient for development. Also, any
template dependencies that are members of the monorepo are linked into the
copied template's `node_modules` rather than being installed from the registry,
again for convenience. During template generation, remove scripts and
dependencies that pertain only to membership in the monorepo; for now, that
involves removing embark as a dependency since we're not quite ready for that
arrangement to be the default, i.e. outside of the monorepo.
Refactor the root scripts so that more of them can consistently be used with
Lerna's filter options, e.g. `--scope` and `--ignore`. "Combo" scripts that
don't support filtering generally have a `:full` postfix.
Flip `clean` and `reset` scripts at the root and in the member packages for
consistency re: Lerna's notion of `clean` and embark's notion of `reset`. Have
each package run its `reset` script when its `clean` script is invoked (and
that's all for now), relying on `lerna clean` to delete packages'
`node_modules` in view of how Lerna's topological sorting works.
Lift the implementation of `embark reset` into a private package in
`packages/embark-reset` and make it a bundled dependency of embark. Packages in
`dapps/*` depend on `embark-reset` directly and make use of it with `npx
embark-reset` (but only in monorepo context). This removes a "wart" where
reboots could show errors when embark's sources aren't already built in
`packages/embark/dist`. Users will not notice any difference since `embark
reset` works as before, transparently making use of the `embark-reset`
package. The only downside to having it be a bundled dependency of embark is
that bundled deps have all of their `node_modules` included in the tarball
built with `npm pack` (that's why having the templates as bundled dependencies
of embark isn't a viable approach). However, `embark-reset` only has one
dependency, `rimraf`, which is a tiny module, so the cost seems acceptable.
As part of the reorganization, move `test_dapps` into `dapps/tests` and
`packages/embark/templates` into `dapps/templates`. Keep the directory names
short but revise the package names to facilitate simple filtering with
`embark-dapp-*`. Consolidate `.yarnrc` and `.gitignore` and clean up some
redundant ignore listings.
Scripts run with `--scope embark-dapp-*` use `--concurrency=1` to avoid
conflicts that could arise over network ports. The `ci:full` and `qa:full`
scripts use `--concurrency=1` in all scopes, for two reasons: resource
limitations on Travis and AppVeyor result in slower runs with concurrency >1,
and if something fails in those contexts it's easier to see what went wrong
when Lerna's output isn't interleaved from a bunch of scripts in `packages/*`.
Bump the Lerna version.
[circular]: https://github.com/lerna/lerna/issues/1198#issuecomment-442278902