Also, in `dapps/tests/contracts` move the `this.timeout(0);` inside the
`it(...)` for the expensive gas esimation (involving
`SimpleStorage.methods.set`) because it otherwise doesn't seem to have an
effect on the default 15 second timeout.
When we introduced dappConnection to ENS, we didn't add the concept
of auto connection, like we do in the "normal" connection. This
means that when using $WEB3, the contracts connection waited for
the user to click on a button, but the ENS part called `ethereum.enable`
directly, which is confusing for the dev, because we specified to
NOT automatically connect to ethreum.
This fixes it by checking the dappAutoEnable property in contracts
config and adds it to the namesystemConfig artifact
And remove `suggestions.json` in the `"files"` list of
`packages/core/console/package.json` since it was moved to
`packages/plugins/suggestions/suggestions.json`.
Remove the `<12.0.0` restriction re: Node.js version in the `"engines"`
settings for all the packages in the monorepo that had that restriction.
Add missing `"engines"` settings in `packages/plugins/snark/package.json`.
Adjust the Azure Pipelines config to include builds for Node.js v12.x and
v13.x.
Bump `solc` to `0.4.26` in `dapps/tests/app` and `dapps/tests/contracts`. It
was discovered that older versions suffered a fatal `Maximum call stack size
exceeded` error when run on Windows with Node.js v12.x or newer. Display a
warning re: the bad combo (solc version + Windows + Node version) if it's
detected at runtime.
Adjust the root `yarn.lock` so that the `sha3` transitive dependency resolves
to a newer version that is compatible with Node v13.x.
Fixes the use of Infura to connect to the ENS contracts. When
connecting directly to Infura, it would throw with `rejected due to
project ID settings`, because it doesn't accept the VM as the domain
Instead, when passing from the proxy, it works. So I changed the
default when no dappConnection to ['$EMBARK']. I also added a
message when the error happens to help users fix it themselves
When in the testnet, we don,t register because we already have the
addresses, which is fine, but we also didn't populate the ensConfig
object which contains the important information about the addresses
and ABI.
There was a lot of lint problems in a couple of files so I cleaned
that up
## Problem
Doing read, then write each a trasaction or call exectues could get
heavy, especially with regular txs on
This was especially true in the tests, which led to deactivate the
tx logger in the tests
## Solution
Instead of reading the whole file, adding the JSON line a writing,
we instead just append some pseudo JSON to it that later gets read
and parsed correctly back to JSON
This commit adds two new configuration settings for Smart Contract configuration:
- `interfaces` - Any Smart Contract that represent an interface or is used for inheritance
- `libraries` - Any Smart Contract that is used as a library
This makes the configuration less redundant in cases where otherwise the `deploy`
property has been set to `false`, such as:
```
deploy: {
Ownable: {
deploy: false
},
...
}
```
The above can now be done via:
```
interfaces: ['Ownable'],
deploy: {
...
}
```
This commit introduces a new `global.getEvmVersion()` that can be used to
conditionally run tests, such as when tests rely on RPC APIs that are only
available in specific evm nodes.
## Issue
Transaction logs for contracts that were unknown to Embark (ie not in the dapp) would often log super large objects (filling the terminal) that were not formatted with spaces so were hard to read without actually be that useful. In addition, occasionally the object logged would throw the error `TypeError: Converting circular structure to JSON`.
## Fix
Set the log level for transaction logs that are not from a known contract to `debug`, so that they do not flood the terminal with often usused information.
Use `util.inspect` to print the transaction log instead of `JSON.stringify` to prevent circular structure errors.
If using `embark-snark` in the dapp as a plugin, and the dapp didn’t have any contracts, the `embark-snark` plugin would not simply exit early and essentially do nothing.
Fix `embark-snark` plugin so that it will run its routine regardless of whether or not the dapp has contracts or not.
Bump `circom` and `snarkjs` to their latest patch version.
## Issue 1 - “register” section missing
When the “register” section of `namesystem.json` was missing, ENS would not deploy the ENS contracts nor create the contracts’ artifacts.
### Fix 1
Fix ENS deployment routine to always deploy the ENS contracts. In the case of testnet/mainnet, the contracts’ addresses will be known and therefore will be understood as “already deployed” by the contract deployer.
## Issue 2 - “register” section exists for non-dev environment
Additionally, if a root domain was specified in the “register” section and the DApp connected to an external node where we do not own the ENS contracts (ie testnet), attempting to register a root domain would not be possible as we do not own the ENS contracts.
### Fix 2
Fix ENS deployment routine to check if we are on a network in which we own the ENS contracts. If we are not, and we have specified a “register” section, print a warning to the user that the registration will be ignored. Additionally, remove the “register” section.
The transaction-logger was slowing down tests because each Tx, it
would read a file and write to it, but that's slow and even got
slower as the file grew bigger
To fix, I removed the Tx-logger from text, along with the profiler
as they are useless for tests
(cherry picked from commit a656eea7dda83ad970615cffd51cce5d53a1d034)
There was a race condition in which the coverage module tried to read a generated
coverage report before it was actually generated.
The issue was that the coverage generation was done on Embark's `tests:finished` event
in a fire and forget manner via `emit('tests:finished')` which doesn't
ensure control flow.
This commit changes it to use `runActionsForEvent('tests:finished')` instead and also
registers the handler for coverage report generation as action via `registerActionForEvent()`.
This ensures that those actions are run first, before the code moves on with other
operations that might rely on the result of any of those actions.
Refactor typings as necessary. In order for `bignumber.js` in the root
`node_modules` to not conflict with `@types/bignumber.js`, specify
`"bignumber.js": "5.0.0"` in `devDependencies` and `"embark-ui/bignumber.js"`
in `nohoist` of the root `package.json`.
In `packages/plugins/rpc-manager` switch from callback to promise usage with
respect to `web3.eth.accounts.signTransaction` because of a [bug][bug]
discovered in web3 v1.2.4.
In `packages/plugins/solidity-tests` specialize the tsc compiler options with
`"skipLibCheck": true` because of a problematic web3-related typing in the
`.d.ts` files of the remix-tests package.
Bump ganache-cli from 6.4.3 to 6.7.0 (latest) because 6.4.3 doesn't support
`eth_chainId` but web3 1.2.4 makes use of the `eth_chainId` RPC method (EIP
695).
BREAKING CHANGE: bump embark's minimum supported version of parity from
`>=2.0.0` to `>=2.2.1`. This is necessary since web3 1.2.4 makes use of the
`eth_chainId` RPC method (EIP 695) and that parity version is the earliest one
to implement it.
[bug]: https://github.com/ethereum/web3.js/issues/3283
Was caused by the fact that each rpc-modifier got its own node
accounts, but once the eth_accounts modifier is enabled, the
"node" accounts are always going to contain the custom accounts too
Now, the node accounts are set once eth_accounts is initiated, so
that every modifier is on the same page
Also implement a second layer of protection to make sure that if a
duplication happens, it is gotten rid of
This PR replaces #2057.
Implement a collective typecheck action that can be invoked in the root of the
monorepo with `yarn typecheck` or in watch-mode with `yarn watch:typecheck`.
Include the watch-mode typecheck action as part of `yarn start` (a.k.a
`yarn watch`).
To activate collective typecheck for a package in the monorepo, its
`package.json` file should specify:
```
{
"embark-collective": {
"typecheck": true
}
}
```
*-or-*
```
{
"embark-collective": {
"typecheck": {...}
}
}
```
Where `{...}` above is a `tsconfig.json` fragment that will be merged into the
config generated for the package according the same rules that `tsc` applies
when merging [configs][config].
When collective typecheck begins, it generates a `tsconfig.json` for the root
of the monorepo and for each package that is activated for the action. If the
generated JSON is different than what's on disk for the respective root/package
config, or if the config is not present on disk, then it will be
written. Changes to generated `tsconfig.json` files should be committed; such
changes will arise when there are structural changes to the monorepo, e.g. a
package is added, removed, moved and/or the directory containing it is
renamed. Since the configs are only generated at the beginning of collective
typecheck, when structural changes are made in the monorepo `yarn typecheck`
(or `yarn start` or `yarn watch:typecheck`) should be restarted.
Nearly all of the packages in the monorepo (i.e. all those for which it makes
sense) have been activated for collective typecheck. Even those packages that
don't contain `.ts` sources are activated because `tsc` can make better sense
of the code base as a whole owing to the project references included in the
generated `tsconfig.json` files. Also, owing to the fully cross-referenced
`tsconfig.json` files, it's possible for `tsc` to type check the whole code
base without babel (`yarn build` or `yarn watch:build`) having been run
beforehand.
**NOTE** that a *"cold typecheck"* of the whole monorepo is resource intensive:
on this author's 2019 MacBook Pro it takes around three minutes, the fans spin
up, and `tsc` uses nearly 0.5 GB of RAM. However, once a full typecheck has
completed, the next full typecheck will complete in a few seconds or less; and
when running in watch-mode there is likewise a *big* speedup once a full
typecheck has completed, whether that full check happened before it's running
in watch-mode or when watch-mode itself resulted in a full check before
switching automatically to incremental check, as well a corresponding *big*
reduction in resource consumption. A full check will be needed any time
`yarn typecheck` (or `yarn start` or `yarn watch:typecheck`) is run in a fresh
clone plus `yarn install`, or after doing `yarn reboot[:full]` or `yarn reset`.
The combination of options in each generated package-level `tsconfig.json` and
the root `tsconfig.base.json` result in `tsc` writing `.d.ts` files (TypeScript
declaration files) into the `dist/` directory of each package. That
output is intended to live side-by-side with babel's output, and therefore the
`"rootDir"` option in each generated config is set to `"./src"`.
In projects activated for collective typecheck, `.js` may be converted to `.ts`
and/or `.ts` sources may be added without any additional changes needed in
package-level `package.json`.
---
Reorganize types in `packages/core/typings` (a.k.a `@types/embark`) into
`packages/core/core` (`embark-core`), refactor other packages' imports
accordingly, and delete `packages/core/typings` from the monorepo. This results
in some similarly named but incompatible types exported from `embark-core`
(e.g. `Events` and `EmbarkEvents`, the latter being the one from
`packages/core/typings`); future refactoring should consolidate those types. To
avoid circular dependency relationships it's also necessary to split out
`Engine` from `embark-core` into its own package (`embark-engine`) and to
introduce a bit of duplication, e.g. the `Maybe` type that's now defined in
both `embark-i18n` and `embark-core`.
In the process of the types reorg, move many dependencies spec'd in various
`package.json` to the `package.json` of the package/s that actually depend on
them, e.g. many are moved from `packages/embark/package.json` to
`packages/core/engine/package.json`. Related to those moves, fix some Node.js
`require`-logic related to bug-prone dependency resolution.
Fix all type errors that appeared as a result of activating collective
typecheck across the whole monorepo.
Reactivate `tslint` in `packages/core/core` and fix the remaining linter errors.
Tidy up and add a few items in the root `package.json` scripts.
Bump lerna from `3.16.4` to `3.19.0`.
Bumpt typescript from `3.6.3` to `3.7.2`.
Bumpt tslint from `5.16.0` to `5.20.1`.
Make various changes related to packages' `import`/`require`ing packages that
weren't spec'd in their respective `package.json`. More refactoring is needed
in this regard, but changes were made as the problems were observed in the
process of authoring this PR.
[config]: https://www.typescriptlang.org/docs/handbook/tsconfig-json.html
This was caused by the fact that we registered the action to change
the accounts, but that action needs the node accounts, which is
a request to eth_accounts, hence creating a loop
The transaction logger takes care of intercepting any responses coming from the
blockchain proxy, determines what response it's dealing with and then extracts
information from the response to output useful log information to the user, such as
when a contract methods has been called etc.
It turned out that it didn't properly handle cases where value transactions
from account to account (such as done here in [Status Teller](a5ab4d4b26/embarkConfig/data.js (L100-L110))) have been made.
Since Embark couldn't map any of those accounts to actual contracts, while
still having stored corresponding transactions, it logged them as transactions
from "Unknown Smart Contracts".
This commit ensures via heuristics that, if the address a transactions is sent to is
included in any of the nodes accounts, the transaction logger logs a useful message
that a certain value is sent from one to anover account.
EmbarkBot
Michael Bradley, Jr
Jonathan Rainville
Pascal Precht
Iuri Matias
emizzle
dependabot-preview[bot]