This PR replaces #2057.
Implement a collective typecheck action that can be invoked in the root of the
monorepo with `yarn typecheck` or in watch-mode with `yarn watch:typecheck`.
Include the watch-mode typecheck action as part of `yarn start` (a.k.a
`yarn watch`).
To activate collective typecheck for a package in the monorepo, its
`package.json` file should specify:
```
{
"embark-collective": {
"typecheck": true
}
}
```
*-or-*
```
{
"embark-collective": {
"typecheck": {...}
}
}
```
Where `{...}` above is a `tsconfig.json` fragment that will be merged into the
config generated for the package according the same rules that `tsc` applies
when merging [configs][config].
When collective typecheck begins, it generates a `tsconfig.json` for the root
of the monorepo and for each package that is activated for the action. If the
generated JSON is different than what's on disk for the respective root/package
config, or if the config is not present on disk, then it will be
written. Changes to generated `tsconfig.json` files should be committed; such
changes will arise when there are structural changes to the monorepo, e.g. a
package is added, removed, moved and/or the directory containing it is
renamed. Since the configs are only generated at the beginning of collective
typecheck, when structural changes are made in the monorepo `yarn typecheck`
(or `yarn start` or `yarn watch:typecheck`) should be restarted.
Nearly all of the packages in the monorepo (i.e. all those for which it makes
sense) have been activated for collective typecheck. Even those packages that
don't contain `.ts` sources are activated because `tsc` can make better sense
of the code base as a whole owing to the project references included in the
generated `tsconfig.json` files. Also, owing to the fully cross-referenced
`tsconfig.json` files, it's possible for `tsc` to type check the whole code
base without babel (`yarn build` or `yarn watch:build`) having been run
beforehand.
**NOTE** that a *"cold typecheck"* of the whole monorepo is resource intensive:
on this author's 2019 MacBook Pro it takes around three minutes, the fans spin
up, and `tsc` uses nearly 0.5 GB of RAM. However, once a full typecheck has
completed, the next full typecheck will complete in a few seconds or less; and
when running in watch-mode there is likewise a *big* speedup once a full
typecheck has completed, whether that full check happened before it's running
in watch-mode or when watch-mode itself resulted in a full check before
switching automatically to incremental check, as well a corresponding *big*
reduction in resource consumption. A full check will be needed any time
`yarn typecheck` (or `yarn start` or `yarn watch:typecheck`) is run in a fresh
clone plus `yarn install`, or after doing `yarn reboot[:full]` or `yarn reset`.
The combination of options in each generated package-level `tsconfig.json` and
the root `tsconfig.base.json` result in `tsc` writing `.d.ts` files (TypeScript
declaration files) into the `dist/` directory of each package. That
output is intended to live side-by-side with babel's output, and therefore the
`"rootDir"` option in each generated config is set to `"./src"`.
In projects activated for collective typecheck, `.js` may be converted to `.ts`
and/or `.ts` sources may be added without any additional changes needed in
package-level `package.json`.
---
Reorganize types in `packages/core/typings` (a.k.a `@types/embark`) into
`packages/core/core` (`embark-core`), refactor other packages' imports
accordingly, and delete `packages/core/typings` from the monorepo. This results
in some similarly named but incompatible types exported from `embark-core`
(e.g. `Events` and `EmbarkEvents`, the latter being the one from
`packages/core/typings`); future refactoring should consolidate those types. To
avoid circular dependency relationships it's also necessary to split out
`Engine` from `embark-core` into its own package (`embark-engine`) and to
introduce a bit of duplication, e.g. the `Maybe` type that's now defined in
both `embark-i18n` and `embark-core`.
In the process of the types reorg, move many dependencies spec'd in various
`package.json` to the `package.json` of the package/s that actually depend on
them, e.g. many are moved from `packages/embark/package.json` to
`packages/core/engine/package.json`. Related to those moves, fix some Node.js
`require`-logic related to bug-prone dependency resolution.
Fix all type errors that appeared as a result of activating collective
typecheck across the whole monorepo.
Reactivate `tslint` in `packages/core/core` and fix the remaining linter errors.
Tidy up and add a few items in the root `package.json` scripts.
Bump lerna from `3.16.4` to `3.19.0`.
Bumpt typescript from `3.6.3` to `3.7.2`.
Bumpt tslint from `5.16.0` to `5.20.1`.
Make various changes related to packages' `import`/`require`ing packages that
weren't spec'd in their respective `package.json`. More refactoring is needed
in this regard, but changes were made as the problems were observed in the
process of authoring this PR.
[config]: https://www.typescriptlang.org/docs/handbook/tsconfig-json.html
BREAKING CHANGE:
node: >=10.17.0 <12.0.0
npm: >=6.11.3
yarn: >=1.19.1
node v10.17.0 is the latest in the 10.x series and is still in the Active LTS
lifecycle. Embark is still not compatible with node's 12.x and 13.x
series (because of some dependencies), otherwise it would probably make sense
to bump our minimum supported node version all the way to the most recent 12.x
release.
npm v6.11.3 is the version that's bundled with node v10.17.0.
yarn v1.19.1 is the most recent version as of the time node v10.17.0 was
released.
Change components/TexEditor re: how monaco-editor is loaded, since difficulties
with monaco-editor were the original motivation for "ejecting" the CRA setup.
Specify "nohoist" for `embark-ui/react-scripts` and all its dependencies to
avoid potential headaches when upgrading the react-scripts, i.e. upgrading to
newer versions of create-react-app.
* feat(@embark/compiler): support :before and :after hooks on event compiler:contracts:compile
* style: keep root package.json sorted cleanly
* style: formatting with prettier where print-width is 200
Per the suggestion of @iurimatias
* WIP: PR review
* WIP: PR review
* WIP: refactor to check if file.path is within dappPath() or os.tmpdir()
* WIP: PR review
* WIP: use native async functions (and related JS lang constructs) instead of the async library
* WIP: async.eachObject is no longer a dependency
* chore(@embark/): move embarkjs packages to their own folder
* chore(@embark/): rename embark-ui folder to cockpit
* chore(@embark/): rename packages already in logical folders to remove embark- prefix
chore(@embark/): rename packages already in logical folders to remove embark- prefix
update package.json files to use correct eslint config
remove core/* from package.json workspaces
Effectively deprecate the `embarkjs-connector-web3` package but don't introduce
a breaking change by simply not loading the plugin if it's specified in a
DApp's `embark.json`. If the deprecated plugin is specified, display a message
indicating the plugin was ignored and suggesting it be removed from the
project's `embark.json` and `package.json`.
The demo's `embark.json` relies on the bootstrap package being within the
demo's own `node_modules`, but in the monorepo yarn was hoisting it up to the
root `node_modules`.
Implement scripts to collect coverage reports (JSON format) from all packages
in the monorepo that generate such reports. Reports are copied to
`<root>/.nyc_output/coverage-[pkg-dir-name].json`.
Implement scripts to generate a combined html report in `<root>/coverage`.
Adjust root `reset` and `clean` scripts to delete `<root>/.nyc_output` and
`<root>/coverage`.
Implement a script in `<root>/package.json` to generate a `text-lcov` report
and upload it to coveralls from CI builds. Remove coveralls from
`packages/embark`.
Supply `packages/embark` with an nyc configuration in its `package.json` and
have its `"test":` script generate both `json` and `html` reports.
Use nyc with `embarkjs`'s test suite: supply an nyc configuration in its
`package.json` and have its `"test":` script generate both `json` and `html`
reports.
Adjust `embarkjs`'s tests for more accurate coverage reporting.
`package.json` allows for a [`"files"` whitelist][files] to be specified as an
alternative to a top-level `.npmignore` within a package root. Maintaining
whitelists is generally easier and less error-prone than maintaining
blacklists, so implement a `"files"` list for all non-private packages in the
monorepo and remove unneeded `.npmignore` files.
Switch `embark-reset` from being a private package to one that will be
published, adjust the workspace's `"nohoist"` setting accordingly, and no
longer specify `embark-reset` as a bundled dependency of `packages/embark`. I
originally thought there might be a good reason not to publish it, but I no
longer think so.
Remove unnecessary LICENSE files in `packages/{embark,embark-ui}` since Lerna
will automatically copy the root LICENSE into any packages lacking that file,
i.e. before tarballs are packed and published to the NPM registry.
Change the `"author"` field of `packages/embarkjs-connector-web3` to match the
other packages, i.e. such that it matches the copyright assignment in the root
LICENSE. If that's not a desirable thing to do, then instead that package can
have a separate LICENSE file that has a copyright assignment for `"Jonathan
Rainville"`.
Supply some missing `.npmrc` files in `packages/*`.
[files]: https://docs.npmjs.com/files/package.json#files
Previously, templates were in a subdirectory of `packages/embark`. Reorganize
them so that they are member packages of the monorepo. This allows them to
cleanly depend on other members of the monorepo,
e.g. `embarkjs-connector-web3`.
It is desirable for the templates, in the context of the monorepo, to specify
embark as a dependency, to take advantage of `npx embark test` (and it's a
"forward looking" setup re: how we plan to evolve embark). However, if embark
were to specify the template packages as dependencies a circular relationship
would be introduced, which is [unsupported by Lerna][circular]. Therefore,
revise the template generator so that all templates are resolved / fetched at
runtime, i.e. `boilerplate`, `demo`, and `simple` are no longer
"built-ins" *per se*. This change won't be apparent to embark's users, but it
does mean that the template generator won't work (in a production install of
embark) if it can't connect to the npm registry, i.e. when the user runs
`embark demo` or `embark new [--simple]`. When embark is inside the monorepo,
templates are resolved and copied from the yarn workspace rather than being
fetched from the registry, which is convenient for development. Also, any
template dependencies that are members of the monorepo are linked into the
copied template's `node_modules` rather than being installed from the registry,
again for convenience. During template generation, remove scripts and
dependencies that pertain only to membership in the monorepo; for now, that
involves removing embark as a dependency since we're not quite ready for that
arrangement to be the default, i.e. outside of the monorepo.
Refactor the root scripts so that more of them can consistently be used with
Lerna's filter options, e.g. `--scope` and `--ignore`. "Combo" scripts that
don't support filtering generally have a `:full` postfix.
Flip `clean` and `reset` scripts at the root and in the member packages for
consistency re: Lerna's notion of `clean` and embark's notion of `reset`. Have
each package run its `reset` script when its `clean` script is invoked (and
that's all for now), relying on `lerna clean` to delete packages'
`node_modules` in view of how Lerna's topological sorting works.
Lift the implementation of `embark reset` into a private package in
`packages/embark-reset` and make it a bundled dependency of embark. Packages in
`dapps/*` depend on `embark-reset` directly and make use of it with `npx
embark-reset` (but only in monorepo context). This removes a "wart" where
reboots could show errors when embark's sources aren't already built in
`packages/embark/dist`. Users will not notice any difference since `embark
reset` works as before, transparently making use of the `embark-reset`
package. The only downside to having it be a bundled dependency of embark is
that bundled deps have all of their `node_modules` included in the tarball
built with `npm pack` (that's why having the templates as bundled dependencies
of embark isn't a viable approach). However, `embark-reset` only has one
dependency, `rimraf`, which is a tiny module, so the cost seems acceptable.
As part of the reorganization, move `test_dapps` into `dapps/tests` and
`packages/embark/templates` into `dapps/templates`. Keep the directory names
short but revise the package names to facilitate simple filtering with
`embark-dapp-*`. Consolidate `.yarnrc` and `.gitignore` and clean up some
redundant ignore listings.
Scripts run with `--scope embark-dapp-*` use `--concurrency=1` to avoid
conflicts that could arise over network ports. The `ci:full` and `qa:full`
scripts use `--concurrency=1` in all scopes, for two reasons: resource
limitations on Travis and AppVeyor result in slower runs with concurrency >1,
and if something fails in those contexts it's easier to see what went wrong
when Lerna's output isn't interleaved from a bunch of scripts in `packages/*`.
Bump the Lerna version.
[circular]: https://github.com/lerna/lerna/issues/1198#issuecomment-442278902
[PR 1318][PR1318] introduces a monorepo member that's used as a DApp
dependency, but the present arrangement whereby `test_dapps/` is an embedded
monorepo makes it difficult to develop and test such packages in tandem with
changes to `test_dapps/packages/*`.
Reorganize `test_dapps/*` as members of the root monorepo and make various
adjustments accordingly. This makes it easy to develop test dapps and any
packages they depend on simultaneously, but we lose the CI/QA arrangement where
test dapps are run with an embark installed from fresh tarballs. That
arrangement, which is quite worthwhile as a means to detect problems arising
from transitive dependencies as soon as possible, will be re-introduced in
another PR, possibly involving an auxiliary repository such as
embark-framework/dapp-bin.
Since the `package.json` `"test"` scripts of `test_dapps/*` are now kicked off
as part of `yarn test` in the root, and since port allocation isn't fully
dynamic, it's important to run `yarn test` with `lerna run`'s `--concurrency=1`
option. For the same reasons, the root `ci` and `qa` scripts are similarly
restricted. In the future, this setup can be refactored and improved, along
with use of `lerna run`'s `--since` option to increase testing efficiency in
CI.
[PR1318]: https://github.com/embark-framework/embark/pull/1318
Setup a `babel.config.js` in the root of the monorepo to be used by
`packages/*`. It won't be used by some packages, e.g. `packages/embark-ui`, but
most of them should use it instead of rolling their own.
Allow for package-level modifications by specifying `babelrcRoots` in the root
`babel.config.js`
Use the babel `--root-mode upward` option in `packages/embark`'s `build`
script. Other packages intending to use the common config should do likewise.
Use a `.babelrc.js` in `packages/embark` to supply the package-specific
`ignore` settings.
Make packages used by the common config devDeps of the root.
Extract babel-related devDeps from `packages/embark`, but don't extract the
non-dev deps since those are used by embark's pipeline in a production
install. Normally, it should only be necessary to have `@babel/cli` and
`@babel/core` in devDeps, and possibly `@babel/runtime-corejs2` in deps, plus
any package-specific babel-related dev/deps. Once we deprecate the pipeline, we
can finish the extraction.
Use `ncu -f '/babel/' -u` to bump the versions of all babel-related deps in the
root and in `packages/embark`. We get better space/time savings from the yarn
workspace when versions match.
TL;DR
=====
`yarn install` in a fresh clone of the repo.
`yarn reboot` when switching branches.
When pulling in these changes, there may be untracked files at the root in
all/some of:
```
.embark/
.nyc_output/
coverage/
dist/
embark-ui/
test_apps/
```
They can be safely deleted since those paths are no longer in use at the root.
Many of the scripts in the top-level `package.json` support Lerna's [filter
options]. For example:
`yarn build --scope embark` build only `packages/embark`.
`yarn build --ignore embark-ui` build everything except `packages/embark-ui`.
Scoping scripts will be more useful when there are more packages in the
monorepo and, for example, `yarn start` doesn't need to be invoked for all of
them while working on just a few of them simultaneously, e.g `embark` and
`embarkjs`.
It's also possible to `cd` into a particular package and run its scripts
directly:
```
cd packages/embark && yarn watch
```
Hot Topics & Questions
======================
What should be done about the [README][embark-readme] for `packages/embark`?
Should the top-level README be duplicated in that package?
Lerna is setup to use [Fixed/Locked mode][fixed-locked], and accordingly
`packages/embark-ui` is set to `4.0.0-beta.0`. The same will be true when
adding embarkjs, swarm-api, etc. to the monorepo. Is this acceptable or do we
want to use [Independent mode][independent]?
Scripts
=======
If a package doesn't have a matching script, `lerna run` skips it
automatically. For example, `packages/embark-ui` doesn't have a `typecheck`
script.
`yarn build`
------------
Runs babel, webpack, etc. according to a package's `build` script.
`yarn build:no-ui` is a shortcut for `yarn build --ignore embark-ui`.
`yarn ci`
---------
Runs a series of scripts relevant in a CI context according to a package's `ci`
script. For `packages/embark` that's `lint typecheck build test package`.
Also runs the `ci` script of the embedded `test_dapps` monorepo.
`yarn clean`
------------
Runs rimraf, etc. according to a package's `clean` script.
`yarn globalize`
----------------
Makes the development embark available on the global PATH, either via
symlink (Linux, macOS) or a shim script (Windows).
`yarn lint`
-----------
Runs eslint, etc. according to a package's `lint` script.
`yarn package`
--------------
Invokes `npm pack` according to a package's `package` script.
`yarn qa`
---------
Very similar to `ci`, runs a series of scripts according to a package's `qa`
script. The big difference between `ci` and `qa` is that at the top-level `qa`
first kicks off `reboot:full`.
There is a `preqa` script ([invoked automatically][npm-scripts]), which is a
bit of a wart. It makes sure that `embark reset` can be run successfully in
`packages/embark/templates/*` when the `reboot` script invokes the `reset`
script.
The `qa` script is invoked by `yarn release` before the latter proceeds to
invoke `lerna publish`.
`yarn reboot`
-------------
Invokes the `reset` script and then does `yarn install`.
The `reboot:full` variant invokes `reset:full` and then does `yarn install`.
`yarn release`
--------------
Works in concert with [lerna publish], which will prompt to verify the version
before proceeding. Use `n` to cancel instead of `ctrl-c` as `lerna publish` has
been seen to occasionally misbehave when not exited cleanly (e.g. creating a
tag when it shouldn't have).
```
yarn release [bump] [--options]
```
* `[bump]` see [`publish` positionals][pub-pos] and [`version`
positionals][ver-pos]; an exact version can also be specified.
* `--preid` prerelease identifier, e.g. `beta`; when doing a prerelease bump
will default to whatever identifier is currently in use.
* `--dist-tag` registry distribution tag, defaults to `latest`.
* `--message` commit message format, defaults to `chore(release): %v`.
* `--sign` indicates that the git commit and tag should be signed; not signed
by default.
* `--release-branch` default is `master`; must match the current branch.
* `--git-remote` default is `origin`.
* `--registry` default is `https://registry.npmjs.org/` per the top-level
[`lerna.json`][lerna-json].
To release `4.0.0-beta.1` as `embark@next` (assuming version is currently at
`4.0.0-beta.0`) could do:
```
yarn release prerelease --dist-tag next
```
For *test releases* (there is no longer a `--dry-run` option) [verdaccio] and a
filesystem git remote can be used.
Condensend instructions:
```
mkdir -p ~/temp/clones && cd ~/temp/clones
git clone git@github.com:embark-framework/embark.git
cd ~/repos/embark
git remote add FAKEembark ~/temp/clones/embark
```
in another terminal:
```
npm i -g verdaccio && verdaccio
```
in the first terminal:
```
yarn release --git-remote FAKEembark --registry http://localhost:4873/
```
`yarn reset`
------------
Invokes cleaning and resetting steps according to a package's `reset`
script. The big difference between `clean` and `reset` is that `reset` is
intended to delete a package's `node_modules`.
The `reset:full` variant deletes the monorepo's top-level `node_modules` at the
end. That shouldn't be necessary too often, e.g. in day-to-day work when
switching branches, which is why there is `reboot` / `reset` vs. `reboot:full`
/ `reset:full`.
Errors may be seen related to invocation of `embark reset` if embark is not
built, but `reset` will still complete successfully.
`yarn start`
------------
Runs babel, webpack, tsc, etc. (in parallel, in watch mode) according to a
package's `start` script.
`yarn test`
-----------
Run mocha, etc. according to a package's `test` script.
The `test:full` variant runs a series of scripts: `lint typecheck test
test_dapps`.
`yarn test_dapps`
-----------------
Runs the `test` script of the embedded `test_dapps` monorepo.
The `test_dapps:ci` and `test_dapps:qa` variants run the `ci` and `qa` scripts
of the embedded `test_dapps` monorepo, respectively.
`yarn typecheck`
----------------
Runs tsc, etc. according to a package's `typecheck` script.
Notes
=====
`npx` is used in some of the top-level and package scripts to ensure the
scripts can run even if `node_modules` is missing.
[`"nohoist"`][nohoist] specifies a couple of embark packages because
[`restrictPath`][restrictpath] is interfering with access to modules that are
located in a higher-up `node_modules`.
All dependencies in `packages/embark-ui` have been made `devDependencies` since
its production build is self-contained.
`packages/embark`'s existing CHANGELOG's formatting has been slightly adjusted
to match the formatting that Lerna will use going forward (entries in the log
haven't been modified).
Lerna will generate a CHANGELOG at the top-level and in each package. Since
we're transitioning to a monorepo, things may look a little wonky with respect
to old entries in `packages/embark/CHANGELOG.md` and going forward we need to
consider how scoping our commits corresponds to member-packages of the
monorepo.
In `packages/embark`, `test` invokes `scripts/test`, which starts a child
process wherein `process.env.DAPP_PATH` is a temporary path that has all of
`packages/embark/dist/test` copied into it, so that paths to test
helpers/fixtures don't need to be prefixed with `dist/test/` and so that a
`.embark` directory doesn't get written into `packages/embark`.
The `"engines"` specified in top-level and packages' `package.json` reflect a
node and npm pair that match (a source of confusion in the past). The pair was
chosen according to the first post v5 npm that's bundled with node. A
`"runtime"` key/object has been introduced in `packages/embark/package.json`
which is used as the basis for specifying the minimum version of node that can
be used to run embark, and that's what is checked by `bin/embark`.
Some changes have been introduced, e.g. in `lib/core/config` and
`lib/utils/solidity/remapImports` so that it's *not* implicitly assumed that
`process.env.DAPP_PATH` / `fs.dappPath()` are the same as
`process.cwd()`. There are probably several++ places where that assumption is
still in effect, and we should work to identify and correct them.
`embark reset` now deletes `embarkArtifacts/` within a dapp root, and
`embarkArtifacts/` is git-ignored.
`lib/core/env` adds all `node_modules` relative to `process.env.EMBARK_PATH` to
`NODE_PATH` so that embark's modules can be resolved as expected whether
embark's `node_modules` have been deduped or are installed in npm's flat
"global style".
`checkDependencies` has been inlined (see `lib/utils/checkDependencies`) and
slightly modified to support dependencies that have been hoisted into a
higher-up `node_modules`, e.g. as part of a yarn workspace. eslint has been
disabled for that script to avoid more involved changes to it.
`test_apps` is not in `packages/embark`; rather, there is `test_dapps` at the
top-level of the monorepo. `test_dapps` is an embedded monorepo, and its `ci` /
`qa` scripts `npm install` embark from freshly built tarballs of the packages
in the outer monorepo and then use that installation to run `embark test` in
the dapps. This should allow us to rapidly detect breakage related to
auto-bumps in transitive dependencies.
[filter options]: https://github.com/lerna/lerna/tree/master/core/filter-options
[embark-readme]: https://github.com/embark-framework/embark/blob/build/lerna/packages/embark/README.md
[fixed-locked]: https://github.com/lerna/lerna#fixedlocked-mode-default
[independent]: https://github.com/lerna/lerna#independent-mode
[npm-scripts]: https://docs.npmjs.com/misc/scripts
[lerna publish]: https://github.com/lerna/lerna/tree/master/commands/publish
[pub-pos]: https://github.com/lerna/lerna/tree/master/commands/publish#positionals
[ver-pos]: https://github.com/lerna/lerna/tree/master/commands/version#positionals
[lerna-json]: https://github.com/embark-framework/embark/blob/build/lerna/lerna.json#L11
[verdaccio]: https://www.npmjs.com/package/verdaccio
[nohoist]: https://github.com/embark-framework/embark/blob/build/lerna/package.json#L52-L55
[restrictpath]: https://github.com/embark-framework/embark/blob/build/lerna/packages/embark/src/lib/core/fs.js#L9
Add support to recursively import contracts. If we have three contracts
1. A imports B
2. B imports C
Then prior to this PR, contract A would import contract B, and a remapping would be added to the contract so the compiler would know how to find contract B. However, contract B imports contracts C, and because the `parseFileForImport` method was not recursive, the remappings were not able to go one level deeper to remap the path to contract C, and thus the compiler would not know how to locate contract C, and would complain with the error `File outside of allowed directories.`
With the introduction of this PR, the `parseFileForImport` method is now recursive, and so any contract imported is also checked for it's own imports that can be remapped. Specifically, this use case is applicable when there is a dependency containing contracts that imports one of it's own dependency's contracts, ie:
```
pragma solididty ^0.5.0;
import "dependency-1/contract-1.sol";
```
where the dependencies look like:
```
|- node_modules
|--- dependency-1
|----- contract-1.sol <--- contains import "dependency-2/contract-2.sol"
|--- dependency-2
|----- contract-2.sol
```
Add unit tests that verify recursive imports work.
Add embark depdendency that installs a contract used in the recursive unit tests.
All code to be run in the console is run through a completely sandboxed VM2 instance, instead of the default Node VM.
VM2 will only allow whitelisted packages in a `require` statement. The whitelisted packages needed to run EmbarkJS scripts are:
```
[
"@babel/runtime-corejs2/helpers/interopRequireDefault",
"@babel/runtime-corejs2/core-js/json/stringify",
"@babel/runtime-corejs2/core-js/promise",
"@babel/runtime-corejs2/core-js/object/assign",
"eth-ens-namehash"
]
```
This can be circumvented in an Embark context (ie Plugin) if needed, for example in a Plugin constructor:
```
Embark.events.emit('runcode:register', 'require', require('lodash'), false);
Embark.events.request("runcode:eval", "_.head(['a', 'b', 'c', 'd']);", (err, result) => {
if(err) return console.log('========> error: ' + err);
console.log('========> ' + result);
});
```
Will emit `========> a`.
NOTE: Attempts to use this method to override `require` and `eval` should be handled by Embark and not allowed.
NOTE: VM2 seems to allow `eval`, however it is in a completely sandboxed environment, so I'm unsure that we need to be too concerned with this. Thoughts?
Refactor tests to use standalone instance of the newly created VM class, so that code is not evaluated through the console. This was done based on the new unit test case where accounts are redefined in a subsequent unit test, which was not originally working with the initial VM2 PR.
Refactor `codeRunner`, put all code-affecting logic in the `VM` class.
Changed `runCode` to `VM` and converted to TypeScript
Add unit tests for `VM`.
The problems described in embark PR #1166 can be resolved by implementing the
blockchain proxy with `http-proxy` directly instead of using `express` together
with `http-proxy-middleware`. The ultimate cause of the buggy behavior (the
"stuck sockets" problems described in #1166) is unknown.
The need to swallow some errors as described in embark PR #1181 is also
eliminated by dropping `http-proxy-middleware` and `express`.
For reasons unknown, `ECONNRESET` errors on websocket connections to embark's
blockchain proxy are not automatically handled on Windows as they are on macOS
and Linux (or those errors aren't happening on those platforms, it's difficult
to determine). Explicitly swallow such errors so the blockchain process doesn't
crash. Prior to this PR, the crash-behavior can be reproduced on Windows by
running `embark blockchain` and `embark run` in separate terminals and quitting
`embark run` while `embark blockchain` is still running.
Consistently use the `simples` package's `WsParser` to process websocket
traffic instead of using `WsParser` for requests and the `ws` package's
`Websocket.Receiver` for responses.
Consistently use `pump` to connect parser streams instead of using `pump` in
some places and `chain` in others. Drop use of `cloneable` (and the package
dependency) since it was used previously in hopes it would fix the errors, but
it's unnecessary and didn't fix them.
Michael Bradley, Jr
dependabot-preview[bot]
Iuri Matias
Pascal Precht
Jonathan Rainville
André Medeiros
Anthony Laibe
emizzle