This PR replaces #2057.
Implement a collective typecheck action that can be invoked in the root of the
monorepo with `yarn typecheck` or in watch-mode with `yarn watch:typecheck`.
Include the watch-mode typecheck action as part of `yarn start` (a.k.a
`yarn watch`).
To activate collective typecheck for a package in the monorepo, its
`package.json` file should specify:
```
{
"embark-collective": {
"typecheck": true
}
}
```
*-or-*
```
{
"embark-collective": {
"typecheck": {...}
}
}
```
Where `{...}` above is a `tsconfig.json` fragment that will be merged into the
config generated for the package according the same rules that `tsc` applies
when merging [configs][config].
When collective typecheck begins, it generates a `tsconfig.json` for the root
of the monorepo and for each package that is activated for the action. If the
generated JSON is different than what's on disk for the respective root/package
config, or if the config is not present on disk, then it will be
written. Changes to generated `tsconfig.json` files should be committed; such
changes will arise when there are structural changes to the monorepo, e.g. a
package is added, removed, moved and/or the directory containing it is
renamed. Since the configs are only generated at the beginning of collective
typecheck, when structural changes are made in the monorepo `yarn typecheck`
(or `yarn start` or `yarn watch:typecheck`) should be restarted.
Nearly all of the packages in the monorepo (i.e. all those for which it makes
sense) have been activated for collective typecheck. Even those packages that
don't contain `.ts` sources are activated because `tsc` can make better sense
of the code base as a whole owing to the project references included in the
generated `tsconfig.json` files. Also, owing to the fully cross-referenced
`tsconfig.json` files, it's possible for `tsc` to type check the whole code
base without babel (`yarn build` or `yarn watch:build`) having been run
beforehand.
**NOTE** that a *"cold typecheck"* of the whole monorepo is resource intensive:
on this author's 2019 MacBook Pro it takes around three minutes, the fans spin
up, and `tsc` uses nearly 0.5 GB of RAM. However, once a full typecheck has
completed, the next full typecheck will complete in a few seconds or less; and
when running in watch-mode there is likewise a *big* speedup once a full
typecheck has completed, whether that full check happened before it's running
in watch-mode or when watch-mode itself resulted in a full check before
switching automatically to incremental check, as well a corresponding *big*
reduction in resource consumption. A full check will be needed any time
`yarn typecheck` (or `yarn start` or `yarn watch:typecheck`) is run in a fresh
clone plus `yarn install`, or after doing `yarn reboot[:full]` or `yarn reset`.
The combination of options in each generated package-level `tsconfig.json` and
the root `tsconfig.base.json` result in `tsc` writing `.d.ts` files (TypeScript
declaration files) into the `dist/` directory of each package. That
output is intended to live side-by-side with babel's output, and therefore the
`"rootDir"` option in each generated config is set to `"./src"`.
In projects activated for collective typecheck, `.js` may be converted to `.ts`
and/or `.ts` sources may be added without any additional changes needed in
package-level `package.json`.
---
Reorganize types in `packages/core/typings` (a.k.a `@types/embark`) into
`packages/core/core` (`embark-core`), refactor other packages' imports
accordingly, and delete `packages/core/typings` from the monorepo. This results
in some similarly named but incompatible types exported from `embark-core`
(e.g. `Events` and `EmbarkEvents`, the latter being the one from
`packages/core/typings`); future refactoring should consolidate those types. To
avoid circular dependency relationships it's also necessary to split out
`Engine` from `embark-core` into its own package (`embark-engine`) and to
introduce a bit of duplication, e.g. the `Maybe` type that's now defined in
both `embark-i18n` and `embark-core`.
In the process of the types reorg, move many dependencies spec'd in various
`package.json` to the `package.json` of the package/s that actually depend on
them, e.g. many are moved from `packages/embark/package.json` to
`packages/core/engine/package.json`. Related to those moves, fix some Node.js
`require`-logic related to bug-prone dependency resolution.
Fix all type errors that appeared as a result of activating collective
typecheck across the whole monorepo.
Reactivate `tslint` in `packages/core/core` and fix the remaining linter errors.
Tidy up and add a few items in the root `package.json` scripts.
Bump lerna from `3.16.4` to `3.19.0`.
Bumpt typescript from `3.6.3` to `3.7.2`.
Bumpt tslint from `5.16.0` to `5.20.1`.
Make various changes related to packages' `import`/`require`ing packages that
weren't spec'd in their respective `package.json`. More refactoring is needed
in this regard, but changes were made as the problems were observed in the
process of authoring this PR.
[config]: https://www.typescriptlang.org/docs/handbook/tsconfig-json.html
It's a relevant `package.json` if the package has a test suite. If `test` isn't
specified then the tests won't run in CI (they have't been running).
Include a fix for one failing test in `packages/plugins/ens` and two failing
test in `packages/stack/deployment`. In all three cases, the mock embark
object's config needed a `blockchainConfig` section with `{ enabled: true }`.
As part of 8ed5376533 we made `ENS.getEnsConfig()`
asynchronous, hence it needs a callback. This change was not done in one of the
ENS tests, resulting in the test to fail. The test mocked that particular API,
turning it into noop, which is why the test kept timing out.
This commit fixes the test by not mocking the API and adding the needed configuration
to the environment.
Prior to this commit, registering ENS subdomains would fail due to `defaultAccount`
being null. This is because the underlying API was still relying on `blockchain:defaultAccount:get`.
However since the bigger refactor, every plugin/module is in charge of creating its own
blockchain connector instance and ensuring it has a default account.
This commit makes use of ENS' module's `webDefaultAccount` async getter to
ensure a valid default account is set when registering an ENS subdomain.
Users can turn of blockchain support if they want to using the blockchain.js
configuration. In practice however, this has never properly worked as several
places in Embark's codebase weren't actually honoring that configuration value.
This commit introduces the necessary changes so that disabling blockchain support will:
No longer generate blockchain related EmbarkJS artifacts
No longer try to deploy Smart Contracts but still compile them
This commit removes the need for `EmbarkJS.onReady()` and `EmbarkJS.Blockchain.blockchainConnector` APIs
in the ENS provider implementation and instead relies purely on vanilla `Web3`. This comes
with the effect that `EmbarkJS.Names` needs to figure out itself what to connect
to, as well as when a connection has been established.
To make that possible, `EmbarkJS.Names` now implements a similar algorithm to
`EmbarkJS.Blockchain` that tries to connect different endpoint, given a `dappConnection`
configuration.
If no `dappConnection` configuration is given via `namesystem.json`, Embark will fallback
to the same connection list that's provided in `contracts.js|json`.
wip
Turns out that, when Embark tries to replace ENS subdomains, it would fail
if `subdomains` aren't defined in the namesystem configuration.
This commit adds a safeguard so that not defining `subdomains` is fine.
This commit fixes the issue that it wasn't possible anymore to use named constructor arguments
in Smart Contract configurations.
For example, the following Smart Contract expects two constructor arguments:
```solidity
contract SomeContract {
constructor(address[] _addresses, int initialValue) public {}
}
```
The first being a list of addresses, the second one a number. This can be configured as:
```js
SomeContract: {
args: [
["$MyToken2", "$SimpleStorage"],
123
]
}
```
Notice how the order of arguments matters here. `_addresses` come first in the constructor,
so they have to be defined first in the configuration as well.
Another way to configure this is using named arguments, which is what's broken prior to this commit:
```js
SomeContract: {
args: {
initialValue: 123,
_addresses: ["$MyToken2", "$SimpleStorage"]
}
}
```
Using a notation like this ^ the order no longer matters as Embark will figure out the right
values for the constructor arguments by their names.
The reason this is broken is because there are several modules in Embark that register and
run a `deployment:contract:beforeDeploy` action, which are allowed to mutate this configuration
object. One of those modules is the `ens` module, which searches for ENS names in the arguments
and figure out whether it has to replace it with a resolved address.
One thing that particular module didn't take into account is that `args` could be either and
array, or an object and will always return an array, changing the shape of `args` in case it was
an object.
This is a problem because another module, `ethereum-blockchain-client`, another action is registered
that takes this mutated object in `determineArguments()` and ensure that, if `args` is actually an
object, the values are put in the correct position matching the constructor of the Smart Contract in
question.
One way to solve this was to use the newly introduced [priority](https://github.com/embark-framework/embark/pull/2031) and ensure
that `ens` action is executed after `ethereum-blockchain-client`'s.
However, the actual bug here is that the ENS module changes the shape of `args` in the first place,
so this commit ensures that it preserves it.
When making use of the `useBuiltIns: 'usage'` option for @babel/preset-env
(which is the case for all transpiled packages in Embark's monorepo) a package
needs to have both @babel/runtime-corejs3 and core-js@3 specified as
dependencies.
BREAKING CHANGE:
node: >=10.17.0 <12.0.0
npm: >=6.11.3
yarn: >=1.19.1
node v10.17.0 is the latest in the 10.x series and is still in the Active LTS
lifecycle. Embark is still not compatible with node's 12.x and 13.x
series (because of some dependencies), otherwise it would probably make sense
to bump our minimum supported node version all the way to the most recent 12.x
release.
npm v6.11.3 is the version that's bundled with node v10.17.0.
yarn v1.19.1 is the most recent version as of the time node v10.17.0 was
released.
* chore(@embark/): move embarkjs packages to their own folder
* chore(@embark/): rename embark-ui folder to cockpit
* chore(@embark/): rename packages already in logical folders to remove embark- prefix
chore(@embark/): rename packages already in logical folders to remove embark- prefix
update package.json files to use correct eslint config
remove core/* from package.json workspaces
Iuri Matias
Michael Bradley, Jr
Pascal Precht
Jonathan Rainville
dependabot-preview[bot]