This PR replaces #2057.
Implement a collective typecheck action that can be invoked in the root of the
monorepo with `yarn typecheck` or in watch-mode with `yarn watch:typecheck`.
Include the watch-mode typecheck action as part of `yarn start` (a.k.a
`yarn watch`).
To activate collective typecheck for a package in the monorepo, its
`package.json` file should specify:
```
{
"embark-collective": {
"typecheck": true
}
}
```
*-or-*
```
{
"embark-collective": {
"typecheck": {...}
}
}
```
Where `{...}` above is a `tsconfig.json` fragment that will be merged into the
config generated for the package according the same rules that `tsc` applies
when merging [configs][config].
When collective typecheck begins, it generates a `tsconfig.json` for the root
of the monorepo and for each package that is activated for the action. If the
generated JSON is different than what's on disk for the respective root/package
config, or if the config is not present on disk, then it will be
written. Changes to generated `tsconfig.json` files should be committed; such
changes will arise when there are structural changes to the monorepo, e.g. a
package is added, removed, moved and/or the directory containing it is
renamed. Since the configs are only generated at the beginning of collective
typecheck, when structural changes are made in the monorepo `yarn typecheck`
(or `yarn start` or `yarn watch:typecheck`) should be restarted.
Nearly all of the packages in the monorepo (i.e. all those for which it makes
sense) have been activated for collective typecheck. Even those packages that
don't contain `.ts` sources are activated because `tsc` can make better sense
of the code base as a whole owing to the project references included in the
generated `tsconfig.json` files. Also, owing to the fully cross-referenced
`tsconfig.json` files, it's possible for `tsc` to type check the whole code
base without babel (`yarn build` or `yarn watch:build`) having been run
beforehand.
**NOTE** that a *"cold typecheck"* of the whole monorepo is resource intensive:
on this author's 2019 MacBook Pro it takes around three minutes, the fans spin
up, and `tsc` uses nearly 0.5 GB of RAM. However, once a full typecheck has
completed, the next full typecheck will complete in a few seconds or less; and
when running in watch-mode there is likewise a *big* speedup once a full
typecheck has completed, whether that full check happened before it's running
in watch-mode or when watch-mode itself resulted in a full check before
switching automatically to incremental check, as well a corresponding *big*
reduction in resource consumption. A full check will be needed any time
`yarn typecheck` (or `yarn start` or `yarn watch:typecheck`) is run in a fresh
clone plus `yarn install`, or after doing `yarn reboot[:full]` or `yarn reset`.
The combination of options in each generated package-level `tsconfig.json` and
the root `tsconfig.base.json` result in `tsc` writing `.d.ts` files (TypeScript
declaration files) into the `dist/` directory of each package. That
output is intended to live side-by-side with babel's output, and therefore the
`"rootDir"` option in each generated config is set to `"./src"`.
In projects activated for collective typecheck, `.js` may be converted to `.ts`
and/or `.ts` sources may be added without any additional changes needed in
package-level `package.json`.
---
Reorganize types in `packages/core/typings` (a.k.a `@types/embark`) into
`packages/core/core` (`embark-core`), refactor other packages' imports
accordingly, and delete `packages/core/typings` from the monorepo. This results
in some similarly named but incompatible types exported from `embark-core`
(e.g. `Events` and `EmbarkEvents`, the latter being the one from
`packages/core/typings`); future refactoring should consolidate those types. To
avoid circular dependency relationships it's also necessary to split out
`Engine` from `embark-core` into its own package (`embark-engine`) and to
introduce a bit of duplication, e.g. the `Maybe` type that's now defined in
both `embark-i18n` and `embark-core`.
In the process of the types reorg, move many dependencies spec'd in various
`package.json` to the `package.json` of the package/s that actually depend on
them, e.g. many are moved from `packages/embark/package.json` to
`packages/core/engine/package.json`. Related to those moves, fix some Node.js
`require`-logic related to bug-prone dependency resolution.
Fix all type errors that appeared as a result of activating collective
typecheck across the whole monorepo.
Reactivate `tslint` in `packages/core/core` and fix the remaining linter errors.
Tidy up and add a few items in the root `package.json` scripts.
Bump lerna from `3.16.4` to `3.19.0`.
Bumpt typescript from `3.6.3` to `3.7.2`.
Bumpt tslint from `5.16.0` to `5.20.1`.
Make various changes related to packages' `import`/`require`ing packages that
weren't spec'd in their respective `package.json`. More refactoring is needed
in this regard, but changes were made as the problems were observed in the
process of authoring this PR.
[config]: https://www.typescriptlang.org/docs/handbook/tsconfig-json.html
This was caused by the fact that we registered the action to change
the accounts, but that action needs the node accounts, which is
a request to eth_accounts, hence creating a loop
The transaction logger takes care of intercepting any responses coming from the
blockchain proxy, determines what response it's dealing with and then extracts
information from the response to output useful log information to the user, such as
when a contract methods has been called etc.
It turned out that it didn't properly handle cases where value transactions
from account to account (such as done here in [Status Teller](a5ab4d4b26/embarkConfig/data.js (L100-L110))) have been made.
Since Embark couldn't map any of those accounts to actual contracts, while
still having stored corresponding transactions, it logged them as transactions
from "Unknown Smart Contracts".
This commit ensures via heuristics that, if the address a transactions is sent to is
included in any of the nodes accounts, the transaction logger logs a useful message
that a certain value is sent from one to anover account.
fix(@embark/geth): only register console command if in dev mode; use endpoint; use dev account for regular txs that fix geths stuck tx issue
fix(@embark/geth): only do regular txs if miningMode is dev
fix(@embark/geth): only register console command if in dev mode; use endpoint
fix(@embark/geth): only register console command if in dev mode; use endpoint
fix(@embark/geth): only register console command if in dev mode; use endpoint
fix(@embark/geth): only register console command if in dev mode; use endpoint
It's a relevant `package.json` if the package has a test suite. If `test` isn't
specified then the tests won't run in CI (they have't been running).
Include a fix for one failing test in `packages/plugins/ens` and two failing
test in `packages/stack/deployment`. In all three cases, the mock embark
object's config needed a `blockchainConfig` section with `{ enabled: true }`.
As part of 8ed5376533 we made `ENS.getEnsConfig()`
asynchronous, hence it needs a callback. This change was not done in one of the
ENS tests, resulting in the test to fail. The test mocked that particular API,
turning it into noop, which is why the test kept timing out.
This commit fixes the test by not mocking the API and adding the needed configuration
to the environment.
Prior to this commit, registering ENS subdomains would fail due to `defaultAccount`
being null. This is because the underlying API was still relying on `blockchain:defaultAccount:get`.
However since the bigger refactor, every plugin/module is in charge of creating its own
blockchain connector instance and ensuring it has a default account.
This commit makes use of ENS' module's `webDefaultAccount` async getter to
ensure a valid default account is set when registering an ENS subdomain.
Add back DevTxs.
DevTxs sends a zero-value tx to push through any pending txs that may get stuck with geth while in `—dev` mode.
When the geth client is running, devtxs is started automatically, sending a transaction every 10 seconds.
Converted the legacy code in to typescript.
Tests were exiting early and Mocha was reporting an exit code of 0. This allowed CI to complete as if the tests were successful.
Change `compiler:contracts` event request to `compiler:contracts:compile` and update documentation. Because the `compiler:contracts` event didn’t exist, this test was silently failing.
Update the `TestEvents` mock object to allow passing of parameters to an event that is not a callback.
Add unit tests to test for contracts loaded via node_modules.
1. This PR contains a change where any contracts loaded from node_modules will be imported in to `.embark/contracts/node_modules`. Previously, these contracts were loaded in to `.embark/node_modules` (with the `/contracts`).
Re-enable debugger for cockpit and console.
Add missing request `blockchain:getTransaction` required to start a debugging session.
Fix error in console when stopping a debug session.
Add option in communication config to choose which Whisper client to use.
Because Parity’s implementation of Whisper is not compatible with Whisper v6, and therefore web3.js in its current form, the following changes have been made:
1. remove any functionality associated with launching a Parity Whisper process.
2. Warn the user when the Parity Whisper client has been opted for in the communication config.
3. Return an error for API calls when Parity Whisper client has been opted for in the communication config.
4. Update Cockpit’s Communication module to show errors returned from API calls.
5. Update the messaging configuration documentation for the new communication client option.
Users can turn of blockchain support if they want to using the blockchain.js
configuration. In practice however, this has never properly worked as several
places in Embark's codebase weren't actually honoring that configuration value.
This commit introduces the necessary changes so that disabling blockchain support will:
No longer generate blockchain related EmbarkJS artifacts
No longer try to deploy Smart Contracts but still compile them
This commit removes the need for `EmbarkJS.onReady()` and `EmbarkJS.Blockchain.blockchainConnector` APIs
in the ENS provider implementation and instead relies purely on vanilla `Web3`. This comes
with the effect that `EmbarkJS.Names` needs to figure out itself what to connect
to, as well as when a connection has been established.
To make that possible, `EmbarkJS.Names` now implements a similar algorithm to
`EmbarkJS.Blockchain` that tries to connect different endpoint, given a `dappConnection`
configuration.
If no `dappConnection` configuration is given via `namesystem.json`, Embark will fallback
to the same connection list that's provided in `contracts.js|json`.
wip
It is unnecessary and not a good idea for `packages/embark` to provide
dependencies to other monorepo packages via any kind of transitive dependency
relationship. In this case, `embark` depended on `embark-core` and
`embark-core` needs `embark-whisper-*` packages but it's `embark` that supplies
those packages indirectly. It works out in the monorepo, *probably* in
production too, but we need to move away from that pattern completely.
`Engine.startEngine(cb)` potentially exits the current process if
any registered plugins emits an error in the bootstrap phase.
This limits consumers of this API to react accordingly. Embark's APIs
should be considered library APIs that propagate errors, but let callers
decide what to do with them.
This commit ensures we keep propagating the error of `startEngine()` without
exiting the current process.
Client traffic with the communication provider node, e.g. a whisper node, is
not proxied so make the default port 8547 instead of 8557. It's not a technical
problem for it to be 8557, but our convention to present has been for 855*
ports to be proxied while the upstream is an 854* port.
Update the boilerplate and demo templates to match.
Jonathan Rainville
Michael Bradley, Jr
Pascal Precht
Iuri Matias
emizzle
Robin Percy
dependabot-preview[bot]