registerSubDomain didn't work in tests because it used the old way
of checking the env, which is checking the `this.env` string, but in
tests, we use the `test` env. So instead, we now check if it is a
known network using the network ID (like we do for other place)
When we introduced dappConnection to ENS, we didn't add the concept
of auto connection, like we do in the "normal" connection. This
means that when using $WEB3, the contracts connection waited for
the user to click on a button, but the ENS part called `ethereum.enable`
directly, which is confusing for the dev, because we specified to
NOT automatically connect to ethreum.
This fixes it by checking the dappAutoEnable property in contracts
config and adds it to the namesystemConfig artifact
Remove the `<12.0.0` restriction re: Node.js version in the `"engines"`
settings for all the packages in the monorepo that had that restriction.
Add missing `"engines"` settings in `packages/plugins/snark/package.json`.
Adjust the Azure Pipelines config to include builds for Node.js v12.x and
v13.x.
Bump `solc` to `0.4.26` in `dapps/tests/app` and `dapps/tests/contracts`. It
was discovered that older versions suffered a fatal `Maximum call stack size
exceeded` error when run on Windows with Node.js v12.x or newer. Display a
warning re: the bad combo (solc version + Windows + Node version) if it's
detected at runtime.
Adjust the root `yarn.lock` so that the `sha3` transitive dependency resolves
to a newer version that is compatible with Node v13.x.
Fixes the use of Infura to connect to the ENS contracts. When
connecting directly to Infura, it would throw with `rejected due to
project ID settings`, because it doesn't accept the VM as the domain
Instead, when passing from the proxy, it works. So I changed the
default when no dappConnection to ['$EMBARK']. I also added a
message when the error happens to help users fix it themselves
When in the testnet, we don,t register because we already have the
addresses, which is fine, but we also didn't populate the ensConfig
object which contains the important information about the addresses
and ABI.
There was a lot of lint problems in a couple of files so I cleaned
that up
Refactor typings as necessary. In order for `bignumber.js` in the root
`node_modules` to not conflict with `@types/bignumber.js`, specify
`"bignumber.js": "5.0.0"` in `devDependencies` and `"embark-ui/bignumber.js"`
in `nohoist` of the root `package.json`.
In `packages/plugins/rpc-manager` switch from callback to promise usage with
respect to `web3.eth.accounts.signTransaction` because of a [bug][bug]
discovered in web3 v1.2.4.
In `packages/plugins/solidity-tests` specialize the tsc compiler options with
`"skipLibCheck": true` because of a problematic web3-related typing in the
`.d.ts` files of the remix-tests package.
Bump ganache-cli from 6.4.3 to 6.7.0 (latest) because 6.4.3 doesn't support
`eth_chainId` but web3 1.2.4 makes use of the `eth_chainId` RPC method (EIP
695).
BREAKING CHANGE: bump embark's minimum supported version of parity from
`>=2.0.0` to `>=2.2.1`. This is necessary since web3 1.2.4 makes use of the
`eth_chainId` RPC method (EIP 695) and that parity version is the earliest one
to implement it.
[bug]: https://github.com/ethereum/web3.js/issues/3283
During `embark test`, the contracts dapp was throwing an error:
```
connection not open on send()
Error: Invalid JSON RPC response: ""
at Object.InvalidResponse (/Users/michael/repos/embark/node_modules/web3-core-helpers/src/errors.js:42:16)
at XMLHttpRequest.request.onreadystatechange (/Users/michael/repos/embark/node_modules/web3-providers-http/src/index.js:92:32)
at XMLHttpRequestEventTarget.dispatchEvent (/Users/michael/repos/embark/node_modules/xhr2-cookies/xml-http-request-event-target.ts:44:13)
at XMLHttpRequest._setReadyState (/Users/michael/repos/embark/node_modules/xhr2-cookies/xml-http-request.ts:219:8)
at XMLHttpRequest._onHttpRequestError (/Users/michael/repos/embark/node_modules/xhr2-cookies/xml-http-request.ts:379:8)
at ClientRequest.<anonymous> (/Users/michael/repos/embark/node_modules/xhr2-cookies/xml-http-request.ts:266:37)
at ClientRequest.emit (events.js:198:13)
at Socket.socketErrorListener (_http_client.js:392:9)
at Socket.emit (events.js:198:13)
at emitErrorNT (internal/streams/destroy.js:91:8)
at emitErrorAndCloseNT (internal/streams/destroy.js:59:3)
at process._tickCallback (internal/process/next_tick.js:63:19)
(node:75120) UnhandledPromiseRejectionWarning: Error: Provider not set or invalid
...
```
This was due to the fact that during testing, the Ganache VM **provider** is used as the blockchain node, instead of spinning up an instance of Ganache. Due to this, there is no HTTP nor WebSockets RPC endpoint opened on the VM node, and the contracts dapp was not able to connect to the node during tests.
Add `$EMBARK` to the contract config’s `dappConnection` list, so that the contract test dapp can successfully connect to Embark’s proxy, which ultimately communicates with the Ganache VM.
As a side note, without `$EMBARK` in the `dappConnection` list, the tests could run successfully when using `embark test —node=embark`. This succeeds because the geth node exposes the RPC WebSockets endpoint that the contracts app connects to on `ws://localhost:8546`.
This PR replaces #2057.
Implement a collective typecheck action that can be invoked in the root of the
monorepo with `yarn typecheck` or in watch-mode with `yarn watch:typecheck`.
Include the watch-mode typecheck action as part of `yarn start` (a.k.a
`yarn watch`).
To activate collective typecheck for a package in the monorepo, its
`package.json` file should specify:
```
{
"embark-collective": {
"typecheck": true
}
}
```
*-or-*
```
{
"embark-collective": {
"typecheck": {...}
}
}
```
Where `{...}` above is a `tsconfig.json` fragment that will be merged into the
config generated for the package according the same rules that `tsc` applies
when merging [configs][config].
When collective typecheck begins, it generates a `tsconfig.json` for the root
of the monorepo and for each package that is activated for the action. If the
generated JSON is different than what's on disk for the respective root/package
config, or if the config is not present on disk, then it will be
written. Changes to generated `tsconfig.json` files should be committed; such
changes will arise when there are structural changes to the monorepo, e.g. a
package is added, removed, moved and/or the directory containing it is
renamed. Since the configs are only generated at the beginning of collective
typecheck, when structural changes are made in the monorepo `yarn typecheck`
(or `yarn start` or `yarn watch:typecheck`) should be restarted.
Nearly all of the packages in the monorepo (i.e. all those for which it makes
sense) have been activated for collective typecheck. Even those packages that
don't contain `.ts` sources are activated because `tsc` can make better sense
of the code base as a whole owing to the project references included in the
generated `tsconfig.json` files. Also, owing to the fully cross-referenced
`tsconfig.json` files, it's possible for `tsc` to type check the whole code
base without babel (`yarn build` or `yarn watch:build`) having been run
beforehand.
**NOTE** that a *"cold typecheck"* of the whole monorepo is resource intensive:
on this author's 2019 MacBook Pro it takes around three minutes, the fans spin
up, and `tsc` uses nearly 0.5 GB of RAM. However, once a full typecheck has
completed, the next full typecheck will complete in a few seconds or less; and
when running in watch-mode there is likewise a *big* speedup once a full
typecheck has completed, whether that full check happened before it's running
in watch-mode or when watch-mode itself resulted in a full check before
switching automatically to incremental check, as well a corresponding *big*
reduction in resource consumption. A full check will be needed any time
`yarn typecheck` (or `yarn start` or `yarn watch:typecheck`) is run in a fresh
clone plus `yarn install`, or after doing `yarn reboot[:full]` or `yarn reset`.
The combination of options in each generated package-level `tsconfig.json` and
the root `tsconfig.base.json` result in `tsc` writing `.d.ts` files (TypeScript
declaration files) into the `dist/` directory of each package. That
output is intended to live side-by-side with babel's output, and therefore the
`"rootDir"` option in each generated config is set to `"./src"`.
In projects activated for collective typecheck, `.js` may be converted to `.ts`
and/or `.ts` sources may be added without any additional changes needed in
package-level `package.json`.
---
Reorganize types in `packages/core/typings` (a.k.a `@types/embark`) into
`packages/core/core` (`embark-core`), refactor other packages' imports
accordingly, and delete `packages/core/typings` from the monorepo. This results
in some similarly named but incompatible types exported from `embark-core`
(e.g. `Events` and `EmbarkEvents`, the latter being the one from
`packages/core/typings`); future refactoring should consolidate those types. To
avoid circular dependency relationships it's also necessary to split out
`Engine` from `embark-core` into its own package (`embark-engine`) and to
introduce a bit of duplication, e.g. the `Maybe` type that's now defined in
both `embark-i18n` and `embark-core`.
In the process of the types reorg, move many dependencies spec'd in various
`package.json` to the `package.json` of the package/s that actually depend on
them, e.g. many are moved from `packages/embark/package.json` to
`packages/core/engine/package.json`. Related to those moves, fix some Node.js
`require`-logic related to bug-prone dependency resolution.
Fix all type errors that appeared as a result of activating collective
typecheck across the whole monorepo.
Reactivate `tslint` in `packages/core/core` and fix the remaining linter errors.
Tidy up and add a few items in the root `package.json` scripts.
Bump lerna from `3.16.4` to `3.19.0`.
Bumpt typescript from `3.6.3` to `3.7.2`.
Bumpt tslint from `5.16.0` to `5.20.1`.
Make various changes related to packages' `import`/`require`ing packages that
weren't spec'd in their respective `package.json`. More refactoring is needed
in this regard, but changes were made as the problems were observed in the
process of authoring this PR.
[config]: https://www.typescriptlang.org/docs/handbook/tsconfig-json.html
Users can turn of blockchain support if they want to using the blockchain.js
configuration. In practice however, this has never properly worked as several
places in Embark's codebase weren't actually honoring that configuration value.
This commit introduces the necessary changes so that disabling blockchain support will:
No longer generate blockchain related EmbarkJS artifacts
No longer try to deploy Smart Contracts but still compile them
This commit removes the need for `EmbarkJS.onReady()` and `EmbarkJS.Blockchain.blockchainConnector` APIs
in the ENS provider implementation and instead relies purely on vanilla `Web3`. This comes
with the effect that `EmbarkJS.Names` needs to figure out itself what to connect
to, as well as when a connection has been established.
To make that possible, `EmbarkJS.Names` now implements a similar algorithm to
`EmbarkJS.Blockchain` that tries to connect different endpoint, given a `dappConnection`
configuration.
If no `dappConnection` configuration is given via `namesystem.json`, Embark will fallback
to the same connection list that's provided in `contracts.js|json`.
wip
BREAKING CHANGE:
Related to #1985. Prior to Embark's minimum supported version of Node.js being
bumped to to 10.17.0, Embark was incompatible with any relatively recent
release of the `ipfs-http-client` package.
While *internal* changes are needed re: ipfs's `Buffer` export for
e.g. `embark_demo` to function correctly *(and this PR makes those changes)*,
Embark otherwise runs/tests okay.
Keep in mind #2033.
However, if a dApp author were to explicitly `require('ifps-api')` in the
front-end that wouldn't work as before; and swapping `"ipfs-http-client"` for
`"ipfs-api"` might also not be enough — there are API changes that dApp authors
would need to consider, regardless of Embark presently supplying the dependency
and EmbarkJS wrapping around it.
Closes#1994.
When making use of the `useBuiltIns: 'usage'` option for @babel/preset-env
(which is the case for all transpiled packages in Embark's monorepo) a package
needs to have both @babel/runtime-corejs3 and core-js@3 specified as
dependencies.
BREAKING CHANGE:
node: >=10.17.0 <12.0.0
npm: >=6.11.3
yarn: >=1.19.1
node v10.17.0 is the latest in the 10.x series and is still in the Active LTS
lifecycle. Embark is still not compatible with node's 12.x and 13.x
series (because of some dependencies), otherwise it would probably make sense
to bump our minimum supported node version all the way to the most recent 12.x
release.
npm v6.11.3 is the version that's bundled with node v10.17.0.
yarn v1.19.1 is the most recent version as of the time node v10.17.0 was
released.
* fix: fix test-app, contracts index file and reload on change
* fix(@embark/cmd_controller): fix missing nodes
Was removed by accident
* feat(@embark/demo): add favicon to embark demo
* chore(@embark/cockpit): change favicon to new Embark logo
* fix(@embark/embarkjs-ens): fix ENS config for embarkjs-ens
* remove comments
* chore(@embark/): move embarkjs packages to their own folder
* chore(@embark/): rename embark-ui folder to cockpit
* chore(@embark/): rename packages already in logical folders to remove embark- prefix
chore(@embark/): rename packages already in logical folders to remove embark- prefix
update package.json files to use correct eslint config
remove core/* from package.json workspaces
* fix embarkjs generation
fix ens setProvider
fix embarkjs objects
fix generated embarkjs provider
generate contracts
fix embarkjs-ens
* address some of the issues in the code review
* address some of the issues in the code review
* address some of the issues in the code review
* address some of the issues in the code review
EmbarkBot
Jonathan Rainville
Iuri Matias
Michael Bradley, Jr
Marc
emizzle
Pascal Precht
dependabot-preview[bot]
André Medeiros