This follows on PR #2227.
Satisfy new peer dependencies following the bumps: `@storybook/core`,
`regenerator-runtime`.
Follow storybook's instructions to add `@storybook/preset-create-react-app` as
a dependency and also add the needed `.storybook/main.js` in
`packages/cockpit/ui/`.
Storybook is sensitive to presets being in the immediate project's
`node_modules` so add a `"nohoist"` in the root `package.json` for
`"embark-ui/@storybook/**"`.
After making the changes above, problems related to babel were observed when
running `yarn start`. It has been known for some time that having the root
babel config's dependencies spec'd in
`packages/utils/collective/package.json` (which is the package that actually
drives the babel cli) could lead to problems related to deduping, but such
problems hadn't been experienced until now. Move the dependencies relevant to
the root `babel.config.js` into the root `package.json` and update the
explanatory comment in the config.
Changes the way the logs are stored to straight up be logged as an
array and then reads it as such. It also removes the reverse from
the read and puts it in the UI instead since it's the UI that needs
it reversed.
Remove the `<12.0.0` restriction re: Node.js version in the `"engines"`
settings for all the packages in the monorepo that had that restriction.
Add missing `"engines"` settings in `packages/plugins/snark/package.json`.
Adjust the Azure Pipelines config to include builds for Node.js v12.x and
v13.x.
Bump `solc` to `0.4.26` in `dapps/tests/app` and `dapps/tests/contracts`. It
was discovered that older versions suffered a fatal `Maximum call stack size
exceeded` error when run on Windows with Node.js v12.x or newer. Display a
warning re: the bad combo (solc version + Windows + Node version) if it's
detected at runtime.
Adjust the root `yarn.lock` so that the `sha3` transitive dependency resolves
to a newer version that is compatible with Node v13.x.
Refactor typings as necessary. In order for `bignumber.js` in the root
`node_modules` to not conflict with `@types/bignumber.js`, specify
`"bignumber.js": "5.0.0"` in `devDependencies` and `"embark-ui/bignumber.js"`
in `nohoist` of the root `package.json`.
In `packages/plugins/rpc-manager` switch from callback to promise usage with
respect to `web3.eth.accounts.signTransaction` because of a [bug][bug]
discovered in web3 v1.2.4.
In `packages/plugins/solidity-tests` specialize the tsc compiler options with
`"skipLibCheck": true` because of a problematic web3-related typing in the
`.d.ts` files of the remix-tests package.
Bump ganache-cli from 6.4.3 to 6.7.0 (latest) because 6.4.3 doesn't support
`eth_chainId` but web3 1.2.4 makes use of the `eth_chainId` RPC method (EIP
695).
BREAKING CHANGE: bump embark's minimum supported version of parity from
`>=2.0.0` to `>=2.2.1`. This is necessary since web3 1.2.4 makes use of the
`eth_chainId` RPC method (EIP 695) and that parity version is the earliest one
to implement it.
[bug]: https://github.com/ethereum/web3.js/issues/3283
For the test DApp, when ENS is enabled, ENS controls were not showing in Cockpit (under Utils), nor were they available to test in the DApp interface as they did not exist.
Fix ENS controls not showing in Cockpit when enabled.
Add ENS tab to Test DApp for ENS UI.
This PR replaces #2057.
Implement a collective typecheck action that can be invoked in the root of the
monorepo with `yarn typecheck` or in watch-mode with `yarn watch:typecheck`.
Include the watch-mode typecheck action as part of `yarn start` (a.k.a
`yarn watch`).
To activate collective typecheck for a package in the monorepo, its
`package.json` file should specify:
```
{
"embark-collective": {
"typecheck": true
}
}
```
*-or-*
```
{
"embark-collective": {
"typecheck": {...}
}
}
```
Where `{...}` above is a `tsconfig.json` fragment that will be merged into the
config generated for the package according the same rules that `tsc` applies
when merging [configs][config].
When collective typecheck begins, it generates a `tsconfig.json` for the root
of the monorepo and for each package that is activated for the action. If the
generated JSON is different than what's on disk for the respective root/package
config, or if the config is not present on disk, then it will be
written. Changes to generated `tsconfig.json` files should be committed; such
changes will arise when there are structural changes to the monorepo, e.g. a
package is added, removed, moved and/or the directory containing it is
renamed. Since the configs are only generated at the beginning of collective
typecheck, when structural changes are made in the monorepo `yarn typecheck`
(or `yarn start` or `yarn watch:typecheck`) should be restarted.
Nearly all of the packages in the monorepo (i.e. all those for which it makes
sense) have been activated for collective typecheck. Even those packages that
don't contain `.ts` sources are activated because `tsc` can make better sense
of the code base as a whole owing to the project references included in the
generated `tsconfig.json` files. Also, owing to the fully cross-referenced
`tsconfig.json` files, it's possible for `tsc` to type check the whole code
base without babel (`yarn build` or `yarn watch:build`) having been run
beforehand.
**NOTE** that a *"cold typecheck"* of the whole monorepo is resource intensive:
on this author's 2019 MacBook Pro it takes around three minutes, the fans spin
up, and `tsc` uses nearly 0.5 GB of RAM. However, once a full typecheck has
completed, the next full typecheck will complete in a few seconds or less; and
when running in watch-mode there is likewise a *big* speedup once a full
typecheck has completed, whether that full check happened before it's running
in watch-mode or when watch-mode itself resulted in a full check before
switching automatically to incremental check, as well a corresponding *big*
reduction in resource consumption. A full check will be needed any time
`yarn typecheck` (or `yarn start` or `yarn watch:typecheck`) is run in a fresh
clone plus `yarn install`, or after doing `yarn reboot[:full]` or `yarn reset`.
The combination of options in each generated package-level `tsconfig.json` and
the root `tsconfig.base.json` result in `tsc` writing `.d.ts` files (TypeScript
declaration files) into the `dist/` directory of each package. That
output is intended to live side-by-side with babel's output, and therefore the
`"rootDir"` option in each generated config is set to `"./src"`.
In projects activated for collective typecheck, `.js` may be converted to `.ts`
and/or `.ts` sources may be added without any additional changes needed in
package-level `package.json`.
---
Reorganize types in `packages/core/typings` (a.k.a `@types/embark`) into
`packages/core/core` (`embark-core`), refactor other packages' imports
accordingly, and delete `packages/core/typings` from the monorepo. This results
in some similarly named but incompatible types exported from `embark-core`
(e.g. `Events` and `EmbarkEvents`, the latter being the one from
`packages/core/typings`); future refactoring should consolidate those types. To
avoid circular dependency relationships it's also necessary to split out
`Engine` from `embark-core` into its own package (`embark-engine`) and to
introduce a bit of duplication, e.g. the `Maybe` type that's now defined in
both `embark-i18n` and `embark-core`.
In the process of the types reorg, move many dependencies spec'd in various
`package.json` to the `package.json` of the package/s that actually depend on
them, e.g. many are moved from `packages/embark/package.json` to
`packages/core/engine/package.json`. Related to those moves, fix some Node.js
`require`-logic related to bug-prone dependency resolution.
Fix all type errors that appeared as a result of activating collective
typecheck across the whole monorepo.
Reactivate `tslint` in `packages/core/core` and fix the remaining linter errors.
Tidy up and add a few items in the root `package.json` scripts.
Bump lerna from `3.16.4` to `3.19.0`.
Bumpt typescript from `3.6.3` to `3.7.2`.
Bumpt tslint from `5.16.0` to `5.20.1`.
Make various changes related to packages' `import`/`require`ing packages that
weren't spec'd in their respective `package.json`. More refactoring is needed
in this regard, but changes were made as the problems were observed in the
process of authoring this PR.
[config]: https://www.typescriptlang.org/docs/handbook/tsconfig-json.html
Add option in communication config to choose which Whisper client to use.
Because Parity’s implementation of Whisper is not compatible with Whisper v6, and therefore web3.js in its current form, the following changes have been made:
1. remove any functionality associated with launching a Parity Whisper process.
2. Warn the user when the Parity Whisper client has been opted for in the communication config.
3. Return an error for API calls when Parity Whisper client has been opted for in the communication config.
4. Update Cockpit’s Communication module to show errors returned from API calls.
5. Update the messaging configuration documentation for the new communication client option.
Hook `embark-profiler` into the engine's contracts group.
Adjust `request` signatures to match v5 usage.
Ensure gas numbers are formatted consistently in the ascii table.
Display non-json output in cockpit's console as monospace/pre to preserve
profiler table formatting.
Also bump peerDeps: @emotion/core from 0.13.1 to 10.0.22 and @emotion/styled
from 0.10.6 to 10.0.23. Satisfy @babel/runtime peerDep with 7.6.3.
Make small refactors in components/FileExplorer and
containers/FileExplorerRowContainer re: the package upgrades.
Replaces #1998
When making use of the `useBuiltIns: 'usage'` option for @babel/preset-env
(which is the case for all transpiled packages in Embark's monorepo) a package
needs to have both @babel/runtime-corejs3 and core-js@3 specified as
dependencies.
EmbarkBot
Michael Bradley, Jr
dependabot-preview[bot]
Iuri Matias
Jonathan Rainville
emizzle