{.used.}

import unittest, options
import chronos
import stew/byteutils
import nimcrypto/sysrand
import ../libp2p/[errors,
                  switch,
                  multistream,
                  standard_setup,
                  stream/bufferstream,
                  stream/connection,
                  multiaddress,
                  peerinfo,
                  crypto/crypto,
                  protocols/protocol,
                  muxers/muxer,
                  stream/lpstream]
import ./helpers

const
  TestCodec = "/test/proto/1.0.0"

type
  TestProto = ref object of LPProtocol

suite "Switch":
  teardown:
    checkTrackers()

  test "e2e use switch dial proto string":
    proc testSwitch() {.async, gcsafe.} =
      let done = newFuture[void]()
      proc handle(conn: Connection, proto: string) {.async, gcsafe.} =
        try:
          let msg = string.fromBytes(await conn.readLp(1024))
          check "Hello!" == msg
          await conn.writeLp("Hello!")
        finally:
          await conn.close()
          done.complete()

      let testProto = new TestProto
      testProto.codec = TestCodec
      testProto.handler = handle

      let switch1 = newStandardSwitch(secureManagers = [SecureProtocol.Noise])
      switch1.mount(testProto)

      let switch2 = newStandardSwitch(secureManagers = [SecureProtocol.Noise])
      var awaiters: seq[Future[void]]
      awaiters.add(await switch1.start())
      awaiters.add(await switch2.start())

      let conn = await switch2.dial(switch1.peerInfo, TestCodec)

      check switch1.isConnected(switch2.peerInfo)
      check switch2.isConnected(switch1.peerInfo)

      await conn.writeLp("Hello!")
      let msg = string.fromBytes(await conn.readLp(1024))
      check "Hello!" == msg
      await conn.close()

      await allFuturesThrowing(
        done.wait(5.seconds),
        switch1.stop(),
        switch2.stop())

      # this needs to go at end
      await allFuturesThrowing(awaiters)

      check not switch1.isConnected(switch2.peerInfo)
      check not switch2.isConnected(switch1.peerInfo)

    waitFor(testSwitch())

  test "e2e use switch dial proto string with custom matcher":
    proc testSwitch() {.async, gcsafe.} =
      let done = newFuture[void]()
      proc handle(conn: Connection, proto: string) {.async, gcsafe.} =
        try:
          let msg = string.fromBytes(await conn.readLp(1024))
          check "Hello!" == msg
          await conn.writeLp("Hello!")
        finally:
          await conn.close()
          done.complete()

      let testProto = new TestProto
      testProto.codec = TestCodec
      testProto.handler = handle

      let callProto = TestCodec & "/pew"

      proc match(proto: string): bool {.gcsafe.} =
        return proto == callProto

      let switch1 = newStandardSwitch(secureManagers = [SecureProtocol.Noise])
      switch1.mount(testProto, match)

      let switch2 = newStandardSwitch(secureManagers = [SecureProtocol.Noise])
      var awaiters: seq[Future[void]]
      awaiters.add(await switch1.start())
      awaiters.add(await switch2.start())

      let conn = await switch2.dial(switch1.peerInfo, callProto)

      check switch1.isConnected(switch2.peerInfo)
      check switch2.isConnected(switch1.peerInfo)

      await conn.writeLp("Hello!")
      let msg = string.fromBytes(await conn.readLp(1024))
      check "Hello!" == msg
      await conn.close()

      await allFuturesThrowing(
        done.wait(5.seconds),
        switch1.stop(),
        switch2.stop())

      # this needs to go at end
      await allFuturesThrowing(awaiters)

      check not switch1.isConnected(switch2.peerInfo)
      check not switch2.isConnected(switch1.peerInfo)

    waitFor(testSwitch())

  test "e2e should not leak bufferstreams and connections on channel close":
    proc testSwitch() {.async, gcsafe.} =
      let done = newFuture[void]()
      proc handle(conn: Connection, proto: string) {.async, gcsafe.} =
        try:
          let msg = string.fromBytes(await conn.readLp(1024))
          check "Hello!" == msg
          await conn.writeLp("Hello!")
        finally:
          await conn.close()
          done.complete()

      let testProto = new TestProto
      testProto.codec = TestCodec
      testProto.handler = handle

      let switch1 = newStandardSwitch(secureManagers = [SecureProtocol.Secio])
      switch1.mount(testProto)

      let switch2 = newStandardSwitch(secureManagers = [SecureProtocol.Secio])
      var awaiters: seq[Future[void]]
      awaiters.add(await switch1.start())
      awaiters.add(await switch2.start())

      let conn = await switch2.dial(switch1.peerInfo, TestCodec)

      check switch1.isConnected(switch2.peerInfo)
      check switch2.isConnected(switch1.peerInfo)

      await conn.writeLp("Hello!")
      let msg = string.fromBytes(await conn.readLp(1024))
      check "Hello!" == msg
      await conn.close()

      await allFuturesThrowing(
        done.wait(5.seconds),
        switch1.stop(),
        switch2.stop(),
      )

      # this needs to go at end
      await allFuturesThrowing(awaiters)

      check not switch1.isConnected(switch2.peerInfo)
      check not switch2.isConnected(switch1.peerInfo)

    waitFor(testSwitch())

  test "e2e use connect then dial":
    proc testSwitch(): Future[bool] {.async, gcsafe.} =
      var awaiters: seq[Future[void]]

      proc handle(conn: Connection, proto: string) {.async, gcsafe.} =
        try:
          let msg = string.fromBytes(await conn.readLp(1024))
          check "Hello!" == msg
        finally:
          await conn.writeLp("Hello!")
          await conn.close()

      let testProto = new TestProto
      testProto.codec = TestCodec
      testProto.handler = handle

      let switch1 = newStandardSwitch(secureManagers = [SecureProtocol.Noise])
      switch1.mount(testProto)

      let switch2 = newStandardSwitch(secureManagers = [SecureProtocol.Noise])
      awaiters.add(await switch1.start())
      awaiters.add(await switch2.start())

      await switch2.connect(switch1.peerInfo)
      let conn = await switch2.dial(switch1.peerInfo, TestCodec)

      check switch1.isConnected(switch2.peerInfo)
      check switch2.isConnected(switch1.peerInfo)

      try:
        await conn.writeLp("Hello!")
        let msg = string.fromBytes(await conn.readLp(1024))
        check "Hello!" == msg
        result = true
      except LPStreamError:
        result = false

      await allFuturesThrowing(
        conn.close(),
        switch1.stop(),
        switch2.stop()
      )
      await allFuturesThrowing(awaiters)

      check not switch1.isConnected(switch2.peerInfo)
      check not switch2.isConnected(switch1.peerInfo)

    check:
      waitFor(testSwitch()) == true

  test "e2e should not leak on peer disconnect":
    proc testSwitch() {.async, gcsafe.} =
      var awaiters: seq[Future[void]]

      let switch1 = newStandardSwitch(secureManagers = [SecureProtocol.Secio])
      let switch2 = newStandardSwitch(secureManagers = [SecureProtocol.Secio])
      awaiters.add(await switch1.start())
      awaiters.add(await switch2.start())

      await switch2.connect(switch1.peerInfo)

      check switch1.isConnected(switch2.peerInfo)
      check switch2.isConnected(switch1.peerInfo)

      await sleepAsync(100.millis)
      await switch2.disconnect(switch1.peerInfo)
      await sleepAsync(2.seconds)

      check not switch1.isConnected(switch2.peerInfo)
      check not switch2.isConnected(switch1.peerInfo)

      var bufferTracker = getTracker(BufferStreamTrackerName)
      # echo bufferTracker.dump()
      check bufferTracker.isLeaked() == false

      var connTracker = getTracker(ConnectionTrackerName)
      # echo connTracker.dump()
      check connTracker.isLeaked() == false

      await allFuturesThrowing(
        switch1.stop(),
        switch2.stop())
      await allFuturesThrowing(awaiters)

    waitFor(testSwitch())

  test "e2e should trigger connection events (remote)":
    proc testSwitch() {.async, gcsafe.} =
      var awaiters: seq[Future[void]]

      let switch1 = newStandardSwitch(secureManagers = [SecureProtocol.Secio])
      let switch2 = newStandardSwitch(secureManagers = [SecureProtocol.Secio])

      var step = 0
      var kinds: set[ConnEventKind]
      proc hook(peerId: PeerID, event: ConnEvent) {.async, gcsafe.} =
        kinds = kinds + {event.kind}
        case step:
        of 0:
          check:
            event.kind == ConnEventKind.Connected
            peerId == switch1.peerInfo.peerId
        of 1:
          check:
            event.kind == ConnEventKind.Disconnected

          check peerId == switch1.peerInfo.peerId
        else:
          check false

        step.inc()

      switch2.addConnEventHandler(hook, ConnEventKind.Connected)
      switch2.addConnEventHandler(hook, ConnEventKind.Disconnected)

      awaiters.add(await switch1.start())
      awaiters.add(await switch2.start())

      await switch2.connect(switch1.peerInfo)

      check switch1.isConnected(switch2.peerInfo)
      check switch2.isConnected(switch1.peerInfo)

      await sleepAsync(100.millis)
      await switch2.disconnect(switch1.peerInfo)
      await sleepAsync(2.seconds)

      check not switch1.isConnected(switch2.peerInfo)
      check not switch2.isConnected(switch1.peerInfo)

      var bufferTracker = getTracker(BufferStreamTrackerName)
      # echo bufferTracker.dump()
      check bufferTracker.isLeaked() == false

      var connTracker = getTracker(ConnectionTrackerName)
      # echo connTracker.dump()
      check connTracker.isLeaked() == false

      check:
        kinds == {
          ConnEventKind.Connected,
          ConnEventKind.Disconnected
        }

      await allFuturesThrowing(
        switch1.stop(),
        switch2.stop())
      await allFuturesThrowing(awaiters)

    waitFor(testSwitch())

  test "e2e should trigger connection events (local)":
    proc testSwitch() {.async, gcsafe.} =
      var awaiters: seq[Future[void]]

      let switch1 = newStandardSwitch(secureManagers = [SecureProtocol.Secio])
      let switch2 = newStandardSwitch(secureManagers = [SecureProtocol.Secio])

      var step = 0
      var kinds: set[ConnEventKind]
      proc hook(peerId: PeerID, event: ConnEvent) {.async, gcsafe.} =
        kinds = kinds + {event.kind}
        case step:
        of 0:
          check:
            event.kind == ConnEventKind.Connected
            peerId == switch2.peerInfo.peerId
        of 1:
          check:
            event.kind == ConnEventKind.Disconnected

          check peerId == switch2.peerInfo.peerId
        else:
          check false

        step.inc()

      switch1.addConnEventHandler(hook, ConnEventKind.Connected)
      switch1.addConnEventHandler(hook, ConnEventKind.Disconnected)

      awaiters.add(await switch1.start())
      awaiters.add(await switch2.start())

      await switch2.connect(switch1.peerInfo)

      check switch1.isConnected(switch2.peerInfo)
      check switch2.isConnected(switch1.peerInfo)

      await sleepAsync(100.millis)
      await switch2.disconnect(switch1.peerInfo)
      await sleepAsync(2.seconds)

      check not switch1.isConnected(switch2.peerInfo)
      check not switch2.isConnected(switch1.peerInfo)

      var bufferTracker = getTracker(BufferStreamTrackerName)
      # echo bufferTracker.dump()
      check bufferTracker.isLeaked() == false

      var connTracker = getTracker(ConnectionTrackerName)
      # echo connTracker.dump()
      check connTracker.isLeaked() == false

      check:
        kinds == {
          ConnEventKind.Connected,
          ConnEventKind.Disconnected
        }

      await allFuturesThrowing(
        switch1.stop(),
        switch2.stop())
      await allFuturesThrowing(awaiters)

    waitFor(testSwitch())

  test "e2e should trigger peer events (remote)":
    proc testSwitch() {.async, gcsafe.} =
      var awaiters: seq[Future[void]]

      let switch1 = newStandardSwitch(secureManagers = [SecureProtocol.Secio])
      let switch2 = newStandardSwitch(secureManagers = [SecureProtocol.Secio])

      var step = 0
      var kinds: set[PeerEvent]
      proc handler(peerId: PeerID, event: PeerEvent) {.async, gcsafe.} =
        kinds = kinds + {event}
        case step:
        of 0:
          check:
            event == PeerEvent.Joined
            peerId == switch2.peerInfo.peerId
        of 1:
          check:
            event == PeerEvent.Left
            peerId == switch2.peerInfo.peerId
        else:
          check false

        step.inc()

      switch1.addPeerEventHandler(handler, PeerEvent.Joined)
      switch1.addPeerEventHandler(handler, PeerEvent.Left)

      awaiters.add(await switch1.start())
      awaiters.add(await switch2.start())

      await switch2.connect(switch1.peerInfo)

      check switch1.isConnected(switch2.peerInfo)
      check switch2.isConnected(switch1.peerInfo)

      await sleepAsync(100.millis)
      await switch2.disconnect(switch1.peerInfo)
      await sleepAsync(2.seconds)

      check not switch1.isConnected(switch2.peerInfo)
      check not switch2.isConnected(switch1.peerInfo)

      var bufferTracker = getTracker(BufferStreamTrackerName)
      # echo bufferTracker.dump()
      check bufferTracker.isLeaked() == false

      var connTracker = getTracker(ConnectionTrackerName)
      # echo connTracker.dump()
      check connTracker.isLeaked() == false

      check:
        kinds == {
          PeerEvent.Joined,
          PeerEvent.Left
        }

      await allFuturesThrowing(
        switch1.stop(),
        switch2.stop())
      await allFuturesThrowing(awaiters)

    waitFor(testSwitch())

  test "e2e should trigger peer events (local)":
    proc testSwitch() {.async, gcsafe.} =
      var awaiters: seq[Future[void]]

      let switch1 = newStandardSwitch(secureManagers = [SecureProtocol.Secio])
      let switch2 = newStandardSwitch(secureManagers = [SecureProtocol.Secio])

      var step = 0
      var kinds: set[PeerEvent]
      proc handler(peerId: PeerID, event: PeerEvent) {.async, gcsafe.} =
        kinds = kinds + {event}
        case step:
        of 0:
          check:
            event == PeerEvent.Joined
            peerId == switch1.peerInfo.peerId
        of 1:
          check:
            event == PeerEvent.Left
            peerId == switch1.peerInfo.peerId
        else:
          check false

        step.inc()

      switch2.addPeerEventHandler(handler, PeerEvent.Joined)
      switch2.addPeerEventHandler(handler, PeerEvent.Left)

      awaiters.add(await switch1.start())
      awaiters.add(await switch2.start())

      await switch2.connect(switch1.peerInfo)

      check switch1.isConnected(switch2.peerInfo)
      check switch2.isConnected(switch1.peerInfo)

      await sleepAsync(100.millis)
      await switch2.disconnect(switch1.peerInfo)
      await sleepAsync(2.seconds)

      check not switch1.isConnected(switch2.peerInfo)
      check not switch2.isConnected(switch1.peerInfo)

      var bufferTracker = getTracker(BufferStreamTrackerName)
      # echo bufferTracker.dump()
      check bufferTracker.isLeaked() == false

      var connTracker = getTracker(ConnectionTrackerName)
      # echo connTracker.dump()
      check connTracker.isLeaked() == false

      check:
        kinds == {
          PeerEvent.Joined,
          PeerEvent.Left
        }

      await allFuturesThrowing(
        switch1.stop(),
        switch2.stop())
      await allFuturesThrowing(awaiters)

    waitFor(testSwitch())

  test "e2e should trigger peer events only once per peer":
    proc testSwitch() {.async, gcsafe.} =
      var awaiters: seq[Future[void]]

      let switch1 = newStandardSwitch(secureManagers = [SecureProtocol.Secio])

      let rng = newRng()
      # use same private keys to emulate two connection from same peer
      let privKey = PrivateKey.random(rng[]).tryGet()
      let switch2 = newStandardSwitch(
        privKey = some(privKey),
        rng = rng,
        secureManagers = [SecureProtocol.Secio])

      let switch3 = newStandardSwitch(
        privKey = some(privKey),
        rng = rng,
        secureManagers = [SecureProtocol.Secio])

      var step = 0
      var kinds: set[PeerEvent]
      proc handler(peerId: PeerID, event: PeerEvent) {.async, gcsafe.} =
        kinds = kinds + {event}
        case step:
        of 0:
          check:
            event == PeerEvent.Joined
        of 1:
          check:
            event == PeerEvent.Left
        else:
          check false # should not trigger this

        step.inc()

      switch1.addPeerEventHandler(handler, PeerEvent.Joined)
      switch1.addPeerEventHandler(handler, PeerEvent.Left)

      awaiters.add(await switch1.start())
      awaiters.add(await switch2.start())
      awaiters.add(await switch3.start())

      await switch2.connect(switch1.peerInfo) # should trigger 1st Join event
      await switch3.connect(switch1.peerInfo) # should trigger 2nd Join event

      check switch1.isConnected(switch2.peerInfo)
      check switch2.isConnected(switch1.peerInfo)
      check switch3.isConnected(switch1.peerInfo)

      await sleepAsync(100.millis)
      await switch2.disconnect(switch1.peerInfo) # should trigger 1st Left event
      await switch3.disconnect(switch1.peerInfo) # should trigger 2nd Left event
      await sleepAsync(2.seconds)

      check not switch1.isConnected(switch2.peerInfo)
      check not switch2.isConnected(switch1.peerInfo)
      check not switch3.isConnected(switch1.peerInfo)

      var bufferTracker = getTracker(BufferStreamTrackerName)
      # echo bufferTracker.dump()
      check bufferTracker.isLeaked() == false

      var connTracker = getTracker(ConnectionTrackerName)
      # echo connTracker.dump()
      check connTracker.isLeaked() == false

      check:
        kinds == {
          PeerEvent.Joined,
          PeerEvent.Left
        }

      await allFuturesThrowing(
        switch1.stop(),
        switch2.stop(),
        switch3.stop())
      await allFuturesThrowing(awaiters)

    waitFor(testSwitch())

  test "connect to inexistent peer":
    proc testSwitch() {.async, gcsafe.} =
      let switch2 = newStandardSwitch(secureManagers = [SecureProtocol.Noise])
      let sfut = await switch2.start()
      let someAddr = MultiAddress.init("/ip4/127.128.0.99").get()
      let seckey = PrivateKey.random(ECDSA, rng[]).get()
      let somePeer = PeerInfo.init(secKey, [someAddr])
      expect(DialFailedError):
        let conn = await switch2.dial(somePeer, TestCodec)
      await switch2.stop()

    waitFor(testSwitch())