Commit Graph

639 Commits

Author SHA1 Message Date
Giovanni Petrantoni a6007be428
avoid sending empty seqno and/or fromPeer (gossip rpc) (#364) 2020-09-15 12:33:18 +02:00
Eugene Kabanov e2d46c6b53
Add `libp2p_dump` and `libp2p_dump_dir` compiler time options. (#359)
* Add `libp2p_dump` and `libp2p_dump_dir` compiler time options.

* Add tools/pbcap_parser.

* Add mplex control messages decoding.
2020-09-15 11:16:43 +02:00
Oskar Thorén 5e66f6fbd8
Add logScope to connmanager and pubsubprotobuf (#363) 2020-09-15 08:03:53 +02:00
Jacek Sieka 0db45462cd
mplex fixes (#362)
* remove almost-empty types module
* lock when writing message (that's the only place the lock matters, and
only when the message is > max msg size)
* logging updates (log in consistent order, makes reading logs easier)
* raise EOF from readExactly only if no bytes have been read (to signal
that _no_ bytes were lost)
2020-09-14 10:19:54 +02:00
Jacek Sieka 96d4c44fec
refactor bufferstream to use a queue (#346)
This change modifies how the backpressure algorithm in bufferstream
works - in particular, instead of working byte-by-byte, it will now work
seq-by-seq.

When data arrives, it usually does so in packets - in the current
bufferstream, the packet is read then split into bytes which are fed one
by one to the bufferstream. On the reading side, the bytes are popped of
the bufferstream, again byte by byte, to satisfy `readOnce` requests -
this introduces a lot of synchronization traffic because the checks for
full buffer and for async event handling must be done for every byte.

In this PR, a queue of length 1 is used instead - this means there will
at most exist one "packet" in `pushTo`, one in the queue and one in the
slush buffer that is used to store incomplete reads.

* avoid byte-by-byte copy to buffer, with synchronization in-between
* reuse AsyncQueue synchronization logic instead of rolling own
* avoid writeHandler callback - implement `write` method instead
* simplify EOF signalling by only setting EOF flag in queue reader (and
reset)
* remove BufferStream pipes (unused)
* fixes drainBuffer deadlock when drain is called from within read loop
and thus blocks draining
* fix lpchannel init order
2020-09-10 08:19:13 +02:00
Jacek Sieka 5b347adf58
logging fixes and small cleanups (#361)
In particular, allow longer multistream select reads
2020-09-09 19:12:08 +02:00
Jacek Sieka 63b38734bd
fix poor performance in LRU cache (#360)
it turns out (in NBC) a heap is sufficiently slow becuase of all the
deletes that it makes more sense to go with a linked list
2020-09-09 18:28:46 +02:00
Jacek Sieka 82c179db9e
mplex fixes (#356)
* close the right connection when channel send fails
* don't crash on channel id that is not unique
2020-09-08 08:24:28 +02:00
Jacek Sieka 2b72d485a3
a few more log fixes (#355) 2020-09-07 14:15:11 +02:00
Jacek Sieka c1856fda53
simplify and unify logging (#353)
* use short format for logging peerid
* log peerid:oid for connections
2020-09-06 10:31:47 +02:00
Jacek Sieka 9b815efe8f
gossipsub: don't subscribe to floodsub also (#352) 2020-09-04 22:53:03 +02:00
Jacek Sieka 16a008db75
fix connection event order when connection dies early (#351)
if the connection is already closed (because the remote closes during
identfiy for example), an exception would be raised which would leave
the connection in limbo, beacuse it would not go through the rest of
internalConnect.

Also, if the connection is already closed, the disconnect event would be
scheduled before the connect event :/
2020-09-04 20:30:26 +02:00
Jacek Sieka 6d91d61844
small cleanups & docs (#347)
* simplify gossipsub heartbeat start / stop
* avoid alloc in peerid check
* stop iterating over seq after unsubscribing item (could crash)
* don't crash on missing private key with enabled sigs (shouldn't happen
but...)
2020-09-04 18:31:43 +02:00
Eugene Kabanov 0b85192119
Remove asyncCheck from codebase. (#345)
* Remove asyncCheck from codebase.

* Replace all `discard` statements with new `asyncSpawn`.

* Bump `nim-chronos` requirement.
2020-09-04 18:30:45 +02:00
Jacek Sieka 5819c6a9a7
gossipsub / floodsub fixes (#348)
* mcache fixes

* remove timed cache - the window shifting already removes old messages
* ref -> object
* avoid unnecessary allocations with `[]` operator

* simplify init

* fix several gossipsub/floodsub issues

* floodsub, gossipsub: don't rebroadcast messages that fail validation
(!)
* floodsub, gossipsub: don't crash when unsubscribing from unknown
topics (!)
* gossipsub: don't send message to peers that are not interested in the
topic, when messages don't share topic list
* floodsub: don't repeat all messages for each message when
rebroadcasting
* floodsub: allow sending empty data
* floodsub: fix inefficient unsubscribe
* sync floodsub/gossipsub logging
* gossipsub: include incoming messages in mcache (!)
* gossipsub: don't rebroadcast already-seen messages (!)
* pubsubpeer: remove incoming/outgoing seen caches - these are already
handled in gossipsub, floodsub and will cause trouble when peers try to
resubscribe / regraft topics (because control messages will have same
digest)
* timedcache: reimplement without timers (fixes timer leaks and extreme
inefficiency due to per-message closures, futures etc)
* timedcache: ref -> obj
2020-09-04 08:10:32 +02:00
Jacek Sieka cd1c68dbc5
avoid send deadlock by not allowing send to block (#342)
* avoid send deadlock by not allowing send to block

* handle message issues more consistently
2020-09-01 09:33:03 +02:00
Dmitriy Ryajov d3182c4dba
No raise send (#339)
* dont raise in send

* check that the lock is acquire on release
2020-08-20 20:50:33 -06:00
Giovanni Petrantoni 840a76915e warn -> debug log levels in errors.nim 2020-08-20 16:53:28 +09:00
Jacek Sieka eb13845f65 work around send that may raise
`send` can raise exceptions that together with asyncCheck will
crash NBC
2020-08-19 14:25:30 +03:00
Zahary Karadjov af0955c58b
Add comments explaning a possible deadlock 2020-08-18 13:51:41 +03:00
Zahary Karadjov 60122a044c
Restore interop with Lighthouse by preventing concurrent meshsub dials 2020-08-17 22:40:58 +03:00
Jacek Sieka 833a5b8e57
add muxer nil check 2020-08-17 13:32:02 +02:00
Jacek Sieka cfcda3c3ef
work around race conditions between identify and other protocols
when identify is run on incoming connections, the connmanager tables are
updated too late for incoming connections to properly be handled

this is a quickfix that will eventually need cleaning up
2020-08-17 13:29:45 +02:00
Jacek Sieka 790b67c923
work around bufferstream deadlock (#332)
mplex backpressure handling deadlocks with something
2020-08-17 12:45:54 +02:00
Jacek Sieka 53877e97bd
trace logs 2020-08-17 12:39:25 +02:00
Jacek Sieka f46bf0faa4
remove send lock (#334)
* remove send lock

When mplex receives data it will block until a reader has processed the
data. Thus, when a large message is received, such as a gossipsub
subscription table, all of mplex will be blocked until all reading is
finished.

However, if at the same time a `dial` to establish a gossipsub send
connection is ongoing, that `dial` will be blocked because mplex is no
longer reading data - specifically, it might indeed be the connection
that's processing the previous data that is waiting for a send
connection.

There are other problems with the current code:
* If an exception is raised, it is not necessarily raised for the same
connection as `p.sendConn`, so resetting `p.sendConn` in the exception
handling is wrong
* `p.isConnected` is checked before taking the lock - thus, if it
returns false, a new dial will be started. If a new task enters `send`
before dial is finished, it will also determine `p.isConnected` is
false, then get stuck on the lock - when the previous task finishes and
releases the lock, the new task will _also_ dial and thus reset
`p.sendConn` causing a leak.

* prefer existing connection

simplifies flow
2020-08-17 12:38:27 +02:00
Jacek Sieka b12145dff7
avoid crash when subscribe is received (#333)
...by making subscribeTopic synchronous, avoiding a peer table lookup
completely.

rebalanceMesh will be called a second later - it's fine
2020-08-17 12:10:22 +02:00
Jacek Sieka ab864fc747
logging cleanups and small fixes (#331) 2020-08-15 21:50:31 +02:00
Jacek Sieka 397f9edfd4
simplify mplex (#327)
* less async
* less copying of data
* less redundant cleanup
2020-08-15 07:58:30 +02:00
Jacek Sieka 9c7e055310
set activity flag on noise / secio (#330) 2020-08-15 07:36:15 +02:00
Dmitriy Ryajov d1f1e1b31e
add missing mplex half closed test (#326) 2020-08-12 07:23:49 +02:00
Dmitriy Ryajov b76b3e0e9b
Rework pubsub (#322)
* move pubsub of off switch, pass switch into pubsub

* use join on lpstreams

* properly cleanup up failed peers

* fix tests

* fix peertable hasPeerId

* fix tests

* rework sending, remove helpers from pubsubpeer, unify in broadcast

* further split broadcast into send

* use send where appropriate

* use formatIt

* improve trace

Co-authored-by: Giovanni Petrantoni <giovanni@fragcolor.xyz>
2020-08-11 18:05:49 -06:00
Eugene Kabanov 59b290fcc7
Refactor minasn1 and fix security issues. (#323)
* Refactor minasn1 and fix security issues.

* Fix for RSA test vectors.
2020-08-11 16:58:51 -06:00
Eugene Kabanov d47b2d805f
Use constant-time hex encoding/decoding procedures explicitly. (#305)
* Use constant-time hex encoding/decoding procedures explicitly.

* Add comments.
2020-08-11 08:48:21 -06:00
Dmitriy Ryajov 2325692f55
Fix half closed (#324)
* don't call `close` in `remoteClose`

* make sure timeout are properly propagted

* fix tests

* adding remote close write test
2020-08-10 16:17:11 -06:00
Giovanni Petrantoni 6ffd5be059 fix crash at TRACE log level 2020-08-08 16:31:37 +09:00
Eugene Kabanov 7c1aac5dc1
Use constant-time comparison for keys and signatures. (#299) 2020-08-08 08:53:33 +02:00
Jacek Sieka f303954989
peer hooks -> events (#320)
* peer hooks -> events

* peerinfo -> peerid
* include connection direction in event
* check connection status after event
* lock connmanager lookup also when dialling peer
* clean up un-upgraded connection when upgrade fails
* await peer eventing

* remove join/lifetime future from peerinfo

Peerinfo instances are not unique per peer so the lifetime future is
misleading - it fires when a random connection is closed, not the "last"
one

* document switch values

* naming

* peerevent->conneevent
2020-08-08 08:52:20 +02:00
zah fbb59c3638
`msg` is a reserved property name in Chronicles (#321)
Every Chronicles log record has an existing `msg` property matching
the static string supplied in the log statement. Thus, it's currently
not possible to use `msg` as the name of a user property:

https://github.com/status-im/nim-chronicles/issues/86
2020-08-07 16:46:00 -06:00
Jacek Sieka 7c2ab38da1
cleanups (#319) 2020-08-06 20:14:40 +02:00
Jacek Sieka c6c0c152c0
Dial peerid (#308)
* prefer PeerID in switch api

This avoids ref issues like ref identity and nil

* use existing peerinfo instance if possible

* remove secureCodec

there may be multiple connections per peerinfo with different codecs

* avoid some extra async::
2020-08-06 09:29:27 +02:00
Giovanni Petrantoni 9bbe5e4841
Fix subclass calls to handleDisconnect (#314)
* Fix subclass calls to handleDisconnect

* add peer ID to nil peer debug message
2020-08-06 11:12:52 +09:00
Giovanni Petrantoni 5c986cf657
Fix build, add some raises (#315)
* Fix build, add some raises

* wip

* wip more raises

* missing exc object in mplex

* proper lifetime for subscribePeer

Co-authored-by: Dmitriy Ryajov <dryajov@gmail.com>
2020-08-05 19:30:57 -06:00
Ștefan Talpalaru bd5d43874a
more expensive metrics (#312) 2020-08-05 14:02:26 +02:00
Dmitriy Ryajov 74a6dccd80
adding channel limits to mplex (#309) 2020-08-04 23:16:04 -06:00
Ștefan Talpalaru 843d32f8db
put expensive metrics under a Nim define (#310) 2020-08-04 17:27:59 -06:00
Dmitriy Ryajov cf2b42b914
Moving idle timeout to Connection to enable across all connection streams (#307)
* move idle timeout logic to connection

* more informative logs

* more informative logs
2020-08-04 07:22:05 -06:00
Giovanni Petrantoni 5f0637c49a
Audit curve fixes part2 (#298)
* refactor and fix mulgen (curve25519)

* crypto tests fixing

* fix some confusion in curve25519 mul

* removing ForbiddenCurveValues table and checks

* fix remaining merge issues
2020-08-04 18:19:26 +09:00
Giovanni Petrantoni 5cd93540fa
add a timeout during noise handshake (#294)
* add a timeout during noise handshake

* noise hs timeout into const
2020-08-04 17:04:16 +09:00
Giovanni Petrantoni 504e0444d3
refactor and fix mulgen (curve25519) (#293)
* refactor and fix mulgen (curve25519)

* crypto tests fixing
2020-08-04 14:07:53 +09:00