* rework cli to accept circuit params
* check circom files extension
* adding new required cli changes
* don't use ufcs
* persistence is a command now
* use `nimOldCaseObjects` switch for nim confutils compat
* misc
* Update cli integration tests
* Fix: simulateProofFailures option is not for validator
* moving circom params under `prover` command
* update tests
* Use circuit assets from codex-contract-eth in tests
* Add "prover" cli command to tests
* use correct stores
* make `verifier` a cmd option
* update circuit artifacts path
* fix cli tests
* Update integration tests to use cli commands
Integration tests have been updated to use the new cli commands. The api for usage in the integration tests has also changed a bit.
Proofs tests have been updated to use 5 nodes and 8 blocks of data. The remaining integration tests also need to be updated.
* remove parsedCli from CodexConfig
Instead, parse the cli args on the fly when needed
* remove unneeded gcsafes
* graceful shutdowns
Where possible, do not raise assert, as other nodes in the test may already be running. Instead, raise exceptions, catch them in multinodes.nim, and attempt to do a teardown before failing the test.
`abortOnError` is set to true so that `fail()` will quit immediately, after teardown has been run.
* update testmarketplace to new api, with valid EC params
---------
Co-authored-by: Dmitriy Ryajov <dryajov@gmail.com>
Co-authored-by: Eric <5089238+emizzle@users.noreply.github.com>
* don't pass erasure
* use correct stores and construct erasure inside the node
* fix tests to match new constructor
* remove prover argument
* review commets
* revert failing on no-prover for now
* small cleanup
* comment out invalid proofs broken test
* implement a logging proxy
The logging proxy:
- prevents the need to import chronicles (as well as export except toJson),
- prevents the need to override `writeValue` or use or import nim-json-seralization elsewhere in the codebase, allowing for sole use of utils/json for de/serialization,
- and handles json formatting correctly in chronicles json sinks
* Rename logging -> logutils to avoid ambiguity with common names
* clean up
* add setProperty for JsonRecord, remove nim-json-serialization conflict
* Allow specifying textlines and json format separately
Not specifying a LogFormat will apply the formatting to both textlines and json sinks.
Specifying a LogFormat will apply the formatting to only that sink.
* remove unneeded usages of std/json
We only need to import utils/json instead of std/json
* move serialization from rest/json to utils/json so it can be shared
* fix NoColors ambiguity
Was causing unit tests to fail on Windows.
* Remove nre usage to fix Windows error
Windows was erroring with `could not load: pcre64.dll`. Instead of fixing that error, remove the pcre usage :)
* Add logutils module doc
* Shorten logutils.formatIt for `NBytes`
Both json and textlines formatIt were not needed, and could be combined into one formatIt
* remove debug integration test config
debug output and logformat of json for integration test logs
* Use ## module doc to support docgen
* bump nim-poseidon2 to export fromBytes
Before the changes in this branch, fromBytes was likely being resolved by nim-stew, or other dependency. With the changes in this branch, that dependency was removed and fromBytes could no longer be resolved. By exporting fromBytes from nim-poseidon, the correct resolution is now happening.
* fixes to get compiling after rebasing master
* Add support for Result types being logged using formatIt
* implement a logging proxy
The logging proxy:
- prevents the need to import chronicles (as well as export except toJson),
- prevents the need to override `writeValue` or use or import nim-json-seralization elsewhere in the codebase, allowing for sole use of utils/json for de/serialization,
- and handles json formatting correctly in chronicles json sinks
* Rename logging -> logutils to avoid ambiguity with common names
* clean up
* add setProperty for JsonRecord, remove nim-json-serialization conflict
* Allow specifying textlines and json format separately
Not specifying a LogFormat will apply the formatting to both textlines and json sinks.
Specifying a LogFormat will apply the formatting to only that sink.
* remove unneeded usages of std/json
We only need to import utils/json instead of std/json
* move serialization from rest/json to utils/json so it can be shared
* fix NoColors ambiguity
Was causing unit tests to fail on Windows.
* Remove nre usage to fix Windows error
Windows was erroring with `could not load: pcre64.dll`. Instead of fixing that error, remove the pcre usage :)
* Add logutils module doc
* Shorten logutils.formatIt for `NBytes`
Both json and textlines formatIt were not needed, and could be combined into one formatIt
* remove debug integration test config
debug output and logformat of json for integration test logs
* Use ## module doc to support docgen
* [docs] fix two client scenario: add missing collateral
* [integration] separate step to wait for node to be started
* [cli] add option to specify ethereum private key
* Remove unused imports
* Fix warnings
* [integration] move type definitions to correct place
* [integration] wait a bit longer for a node to start in debug mode
When e.g. running against Taiko test net rpc, the node start
takes longer
* [integration] simplify handling of codex node and client
* [integration] add Taiko integration test
* [contracts] await token approval confirmation before next tx
* [contracts] deployment address of marketplace on Taiko
* [cli] --eth-private-key now takes a file name
Instead of supplying the private key on the command line,
expect the private key to be in a file with the correct
permissions.
* [utils] Fixes undeclared `activeChroniclesStream` on Windows
* [build] update nim-ethers to include PR #52
Co-authored-by: Eric Mastro <eric.mastro@gmail.com>
* [cli] Better error messages when reading eth private key
Co-authored-by: Eric Mastro <eric.mastro@gmail.com>
* [integration] simplify reading of cmd line arguments
Co-authored-by: Eric Mastro <eric.mastro@gmail.com>
* [build] update to latest version of nim-ethers
* [contracts] updated contract address for Taiko L2
* [build] update codex contracts to latest version
---------
Co-authored-by: Eric Mastro <eric.mastro@gmail.com>
Goal is to provide documentation and to enable conf utils byte params.
* Create byte units NByte and plumb through in size locations.
* add json serde
* plumb parseDuration to conf
* Fixes/workarounds for nimsuggest failures in codex.nim.
* remove rng prefix - it appears to work now
* format new's to be more consistent
* making proc formatting a bit more consistent
* [contracts] Add SlotFreed event
* [integration] allow test node to be stopped twice
* [cli] add --validator option
* [contracts] remove dead code
* [contracts] instantiate OnChainMarket and OnChainClock only once
* [contracts] add Validation
* [sales] remove duplicate import
* [market] add missing import
* [market] subscribe to all SlotFilled events
* [market] add freeSlot()
* [sales] fix warnings
* [market] subscribe to SlotFreed events
* [contracts] fix warning
* [validator] keep track of filled slots
* [validation] remove slots that have ended
* [proving] absorb Proofs into Market
Both Proofs and Market are abstractions around
the Marketplace contract, having them separately
is more trouble than it's worth at the moment.
* [market] add markProofAsMissing()
* [clock] speed up waiting for clock in tests
* [validator] mark proofs as missing
* [timer] fix error on node shutdown
* [cli] handle --persistence and --validator separately
* [market] allow retrieval of proof timeout value
* [validator] do not subscribe to SlotFreed events
Freed slots are already handled in
removeSlotsThatHaveEnded(), and onSlotsFreed()
interfered with its iterator.
* [validator] Start validation at the start of a new period
To decrease the likelihood that we hit the validation timeout.
* [validator] do not mark proofs as missing after timeout
* [market] check whether proof can be marked as missing
* [validator] simplify validation
Simulate a transaction to mark proof as missing, instead
of trying to keep track of all the conditions that may
lead to a proof being marked as missing.
* [build] use nim-ethers PR #40
Uses "pending" blocktag instead of "latest" blocktag
for better simulation of transactions before sending
them.
https://github.com/status-im/nim-ethers/pull/40
* [integration] integration test for validator
* [validator] monitor a maximum number of slots
Adds cli parameter --validator-max-slots.
* [market] fix missing collateral argument
After rebasing, add the new argument to fillSlot calls.
* [build] update to nim-ethers 0.2.5
* [validator] use Set instead of Table to keep track of slots
* [validator] add logging
* [validator] add test for slot failure
* [market] use "pending" blocktag to use more up to date block time
* [contracts] remove unused import
* [validator] fix: wait until after period ends
The smart contract checks that 'end < block.timestamp',
so we need to wait until the block timestamp is greater
than the period end.
* [marketplace] reservations module
- add de/serialization for Availability
- add markUsed/markUnused in persisted availability
- add query for unused
- add reserve/release
- reservation module tests
- split ContractInteractions into client contracts and host contracts
- remove reservations start/stop as the repo start/stop is being managed by the node
- remove dedicated reservations metadata store and use the metadata store from the repo instead
- Split ContractInteractions into:
- ClientInteractions (with purchasing)
- HostInteractions (with sales and proving)
- compilation fix for nim 1.2
[repostore] fix started flag, add tests
[marketplace] persist slot index
For loading the sales state from chain, the slot index was not previously persisted in the contract. Will retrieve the slot index from the contract when the sales state is loaded.
* Revert repostore changes
In favour of separate PR https://github.com/status-im/nim-codex/pull/374.
* remove warnings
* clean up
* tests: stop repostore during teardown
* change constructor type identifier
Change Contracts constructor to accept Contracts type instead of ContractInteractions.
* change constructor return type to Result instead of Option
* fix and split interactions tests
* clean up, fix tests
* find availability by slot id
* remove duplication in host/client interactions
* add test for finding availability by slotId
* log instead of raiseAssert when failed to mark availability as unused
* move to SaleErrored state instead of raiseAssert
* remove unneeded reverse
It appears that order is not preserved in the repostore, so reversing does not have the intended effect here.
* update open api spec for potential rest endpoint errors
* move functions about available bytes to repostore
* WIP: reserve and release availabilities as needed
WIP: not tested yet
Availabilities are marked as used when matched (just before downloading starts) so that future matching logic does not match an availability currently in use.
As the download progresses, batches of blocks are written to disk, and the equivalent bytes are released from the reservation module. The size of the availability is reduced as well.
During a reserve or release operation, availability updates occur after the repo is manipulated. If the availability update operation fails, the reserve or release is rolled back to maintain correct accounting of bytes.
Finally, once download completes, or if an error occurs, the availability is marked as unused so future matching can occur.
* delete availability when all bytes released
* fix tests + cleanup
* remove availability from SalesContext callbacks
Availability is no longer used past the SaleDownloading state in the state machine. Cleanup of Availability (marking unused) is handled directly in the SaleDownloading state, and no longer in SaleErrored or SaleFinished. Likewise, Availabilities shouldn’t need to be handled on node restart.
Additionally, Availability was being passed in SalesContext callbacks, and now that Availability is only used temporarily in the SaleDownloading state, Availability is contextually irrelevant to the callbacks, except in OnStore possibly, though it was not being consumed.
* test clean up
* - remove availability from callbacks and constructors from previous commit that needed to be removed (oopsie)
- fix integration test that checks availabilities
- there was a bug fixed that crashed the node due to a missing `return success` in onStore
- the test was fixed by ensuring that availabilities are remaining on the node, and the size has been reduced
- change Availability back to non-ref object and constructor back to init
- add trace logging of all state transitions in state machine
- add generally useful trace logging
* fixes after rebase
1. Fix onProve callbacks
2. Use Slot type instead of tuple for retrieving active slot.
3. Bump codex-contracts-eth that exposes getActivceSlot call.
* swap contracts branch to not support slot collateral
Slot collateral changes in the contracts require further changes in the client code, so we’ll skip those changes for now and add in a separate commit.
* modify Interactions and Deployment constructors
- `HostInteractions` and `ClientInteractions` constructors were simplified to take a contract address and no overloads
- `Interactions` prepared simplified so there are no overloads
- `Deployment` constructor updated so that it takes an optional string parameter, instead `Option[string]`
* Move `batchProc` declaration
`batchProc` needs to be consumed by both `node` and `salescontext`, and they can’t reference each other as it creates a circular dependency.
* [reservations] rename `available` to `hasAvailable`
* [reservations] default error message to inner error msg
* add SaleIngored state
When a storage request is handled but the request does match availabilities, the sales agent machine is sent to the SaleIgnored state. In addition, the agent is constructed in a way that if the request is ignored, the sales agent is removed from the list of active agents being tracked in the sales module.
* [build] disable XCannotRaiseY hint
There are too many {.raises:[Defect].} in the
libraries that we use, drowning out all other
warnings and hints
* [build] disable BareExcept warning
Not yet enabled in a released version of Nim,
so libraries that we depend on have not fixed
this yet, drowning out our own hints and warnings
* [build] disable DotLikeOps warning
dot-like ops were an experiment that is not going
land in Nim
* [build] compile log statements in tests
When running tests, all log statements are compiled.
They are filtered out at runtime during a test run.
* [build] do not build executable when running unit test
It's already built in the integration test
* [build] Fix warnings
- remove unused code
- remove unused imports
- stop using deprecated stuff
* [build] Put compiler flags behind nim version checks
* [CI] remove Nim 1.2 compatibility
* setting up
* Implements timer utility
* applies async and cancellation to timer loop
* Sets up mocktimer and mockblockstore to set up first maintenance module test
* wip: first test that calls blockChecker
* wip: adding user type to timer callback
* Chronicles doesn't like type-arguments? Disables logging in timer module for now
* Implementing block check test for blockMaintainer module
* Sets up additional tests for blockmaintainer
* Removes generic from timer module. Implements numberOfBlocks per interval in blockMaintainer.
* Implements blockMaintainer
* Sets up tests for blockChecker
* Some comments by Mark
* Cleanup repostore tests
* Setting up the use of std/times for block TTL tracking
* repostore adds expiration timestamp
* Defaults the repostore clock to the system clock
* Applies updates to repostore interface.
* Implements retrieving of block expiration information from repostore
* Sets up tests for maintenance module behavior
* Implements block maintenance module
* Wires maintenance module into codex. Sets up integration tests for block expiration
* Sets up test for missing behavior: removing timestamp metadata on block delete
* Implements removing of expiration metadata in repoStore
* Fixes integration tests for block expiration
* Adds block expiration tests to integration test run
* Handled some comments by Dmitriy
* Review comment by Dmitriy: Removes seq[cid] from runBlockCheck
* Review comment by Dmitriy: Moves key formatting methods to keyutils.
* Review comment by Dmitriy: Encodes durations using chronos
* Fixes conversion of TTL type in conf.
* Review comments by Dmitriy
* Adds unit tests for keyUtils.
* Adds test coverage for exception in maintenance module
* Sets up working dockerized build and codex docker image creation
* Making codex configurable from the docker environment
* Sets up two networks with three codex nodes
* enables and exposes metrics endpoint for first node
* Manually performed two-client test scenario with docker containers
* Sets up docker-ignore and docker github workflow
* Wires up all codex CLI arguments to docker env vars
* Makes API_PORT variable optional as well
* Removes duplicate docker-login step
* Fixes path to docker file
* Switches target dockerhub for debugging
* Adds git tag info to --version output
* Exposes version information via debug endpoint
* Debugging docker image
* specifies target platforms for docker build
* specifies platform for QEMU and buildx steps
* Attempt to debug line endings
* Disables march-native in config.nims as test
* Applies make argument to disable architecture optimization during docker build
* Removes subset version tags from docker build
* Restore multi-arch build
* Removes docker-build test branch from CI branches
* initial implementation of repo store
* allow isManifest on multicodec
* rework with new blockstore
* add raw codec
* rework listBlocks
* remove fsstore
* reworking with repostore
* bump datastore
* fix listBlocks iterator
* adding store's common tests
* run common store tests
* remove fsstore backend tests
* bump datastore
* add `listBlocks` tests
* listBlocks filter based on block type
* disabling tests in need of rewriting
* allow passing block type
* move BlockNotFoundError definition
* fix tests
* increase default advertise loop sleep to 10 mins
* use `self`
* add cache quota functionality
* pass meta store and start repo
* add `CacheQuotaNamespace`
* pass meta store
* bump datastore to latest master
* don't use os `/` as key separator
* Added quota limits support
* tests for quota limits
* add block expiration key
* remove unnesesary space
* use idleAsync in listBlocks
* proper test name
* re-add contrlC try/except
* add storage quota and block ttl config options
* clarify comments
* change expires key format
* check for block presence before storing
* bump datastore
* use dht with fixed datastore `has`
* bump datastore to latest master
* bump dht to latest master
* setup and persist private key
* return dht record spr
* helper to remap multiaddr ip and port
* set/update discovery and announce addrs
* add nat and discovery IPs
* allow for announce and DHT addresses separatelly
* update tests
* check for nat or discoveryIp
* fix integration tests
* misc align
* don't share data dirs and and set bootstrap node
* add log scope
* remap announceAddrs after node start
* simplify discovery initialization
* make nat and disc-ip required
* add log scope don't init dht spr in constructor
* bump dht
* dissallow `0.0.0.0` for `--nat`
* [contracts] ContractInteractions.new() now requires account parameter
* [cli] Only perform Ethereum interactions when --eth-account is specified
* [cli] Add --persistence option that is disabled by default
* [cli] Use Option for ethDeployment parameter
* [node] Better error reporting when Ethereum node cannot be reached
also fix a discrepancy where cli option `--cache-size` is documented as
`0 disables the cache` in `codex/conf.nim`, but previously the value `0` would
result in a cache being constructed with default parameter values for
`CacheStore.new()`
Closes#180
benbierens
markspanbroek
Giuliano Mega
Ben Bierens
Dmitriy Ryajov
Eric
Adam Uhlíř
Jaremy Creechley
Eric Mastro
c-blake
Michael Bradley, Jr