Commit Graph

23 Commits

Author SHA1 Message Date
markspanbroek 7a0a48e4a5
Fix warnings (drops Nim 1.2) (#348)
* [build] disable XCannotRaiseY hint

There are too many {.raises:[Defect].} in the
libraries that we use, drowning out all other
warnings and hints

* [build] disable BareExcept warning

Not yet enabled in a released version of Nim,
so libraries that we depend on have not fixed
this yet, drowning out our own hints and warnings

* [build] disable DotLikeOps warning

dot-like ops were an experiment that is not going
land in Nim

* [build] compile log statements in tests

When running tests, all log statements are compiled.
They are filtered out at runtime during a test run.

* [build] do not build executable when running unit test

It's already built in the integration test

* [build] Fix warnings

- remove unused code
- remove unused imports
- stop using deprecated stuff

* [build] Put compiler flags behind nim version checks

* [CI] remove Nim 1.2 compatibility
2023-03-09 12:23:45 +01:00
Ben Bierens 9c8a59d150
Blockstore maintenance (#347)
* setting up

* Implements timer utility

* applies async and cancellation to timer loop

* Sets up mocktimer and mockblockstore to set up first maintenance module test

* wip: first test that calls blockChecker

* wip: adding user type to timer callback

* Chronicles doesn't like type-arguments? Disables logging in timer module for now

* Implementing block check test for blockMaintainer module

* Sets up additional tests for blockmaintainer

* Removes generic from timer module. Implements numberOfBlocks per interval in blockMaintainer.

* Implements blockMaintainer

* Sets up tests for blockChecker

* Some comments by Mark

* Cleanup repostore tests

* Setting up the use of std/times for block TTL tracking

* repostore adds expiration timestamp

* Defaults the repostore clock to the system clock

* Applies updates to repostore interface.

* Implements retrieving of block expiration information from repostore

* Sets up tests for maintenance module behavior

* Implements block maintenance module

* Wires maintenance module into codex. Sets up integration tests for block expiration

* Sets up test for missing behavior: removing timestamp metadata on block delete

* Implements removing of expiration metadata in repoStore

* Fixes integration tests for block expiration

* Adds block expiration tests to integration test run

* Handled some comments by Dmitriy

* Review comment by Dmitriy: Removes seq[cid] from runBlockCheck

* Review comment by Dmitriy: Moves key formatting methods to keyutils.

* Review comment by Dmitriy: Encodes durations using chronos

* Fixes conversion of TTL type in conf.

* Review comments by Dmitriy

* Adds unit tests for keyUtils.

* Adds test coverage for exception in maintenance module
2023-03-08 16:04:54 +01:00
Dmitriy Ryajov f36dc54eda
Log topic filtering (#312)
* comment

* split out coders and add log level endpoin

* adjust info url

* add log filtering test

* don't stringify cid

* add log level test
2022-11-14 17:42:57 -06:00
markspanbroek 4175689745
Load purchase state from chain (#283)
* [purchasing] Simplify test

* [utils] Move StorageRequest.example up one level

* [purchasing] Load purchases from market

* [purchasing] load purchase states

* Implement myRequest() and getState() methods for OnChainMarket

* [proofs] Fix intermittently failing tests

Ensures that examples of proofs in tests are never of length 0;
these are considered invalid proofs by the smart contract logic.

* [contracts] Fix failing test

With the new solidity contracts update, a contract can only
be paid out after it started.

* [market] Add method to get request end time

* [purchasing] wait until purchase is finished

Purchase.wait() would previously wait until purchase
was started, now we wait until it is finished.

* [purchasing] Handle 'finished' and 'failed' states

* [marketplace] move to failed state once request fails

- Add support for subscribing to request failure events.
- Add supporting contract tests for subscribing to request failure events.
- Allow the PurchaseStarted state to move to PurchaseFailure once a request failure event is emitted
- Add supporting tests for moving from PurchaseStarted to PurchaseFailure
- Add state transition tests for PurchaseUnknown.

* [marketplace] Fix test with longer sleepAsync

* [integration] Add function to restart a codex node

* [purchasing] Set client address before requesting storage

To prevent the purchase id (which equals the request id)
from changing once it's been submitted.

* [contracts] Fix: OnChainMarket.getState()

Had the wrong method signature before

* [purchasing] Load purchases on node start

* [purchasing] Rename state 'PurchaseError' to 'PurchaseErrored'

Allows for an exception type called 'PurchaseError'

* [purchasing] Load purchases in background

No longer calls market.getRequest() for every purchase
on node start.

* [contracts] Add `$` for RequestId, SlotId and Nonce

To aid with debugging

* [purchasing] Add Purchasing.stop()

To ensure that all contract interactions have both a
start() and a stop() for

* [tests] Remove sleepAsync where possible

Use `eventually` loop instead, to make sure that we're
not waiting unnecessarily.

* [integration] Fix: handle non-json response in test

* [purchasing] Add purchase state to json

* [integration] Ensure that purchase is submitted before restart

Fixes test failure on slower CI

* [purchasing] re-implement `description` as method

Allows description to be set in the same module where the
state type is defined.

Co-authored-by: Eric Mastro <eric.mastro@gmail.com>

* [contracts] fix typo

Co-authored-by: Eric Mastro <eric.mastro@gmail.com>

* [market] Use more generic error type

Should we decide to change the provider type later

Co-authored-by: Eric Mastro <eric.mastro@gmail.com>

Co-authored-by: Eric Mastro <eric.mastro@gmail.com>
2022-11-08 08:10:17 +01:00
Dmitriy Ryajov 0ecbfcec9f
setup and persist private key (#292)
* setup and persist private key

* return dht record spr

* helper to remap multiaddr ip and port

* set/update discovery and announce addrs

* add nat and discovery IPs

* allow for announce and DHT addresses separatelly

* update tests

* check for nat or discoveryIp

* fix integration tests

* misc align

* don't share data dirs and and set bootstrap node

* add log scope

* remap announceAddrs after node start

* simplify discovery initialization

* make nat and disc-ip required

* add log scope don't init dht spr in constructor

* bump dht

* dissallow `0.0.0.0` for `--nat`
2022-11-01 18:58:41 -06:00
Bulat-Ziganshin 6e6f40016c
Changes required for reasonable upload/download speed (#265)
Increase blocksize from ~8KiB to ~64KiB and remove useless unbounded prefetching on download
* increased upload/download speed on my Win10 Zen3 box to 50/150 MB/s (with FSStore)
* made manifest files 8x smaller
* two more changes in the tests to make them pass
Closes #263
2022-10-06 23:01:25 +03:00
markspanbroek 097a4cfd67
Better command line options for Ethereum (#181)
* [contracts] ContractInteractions.new() now requires account parameter

* [cli] Only perform Ethereum interactions when --eth-account is specified

* [cli] Add --persistence option that is disabled by default

* [cli] Use Option for ethDeployment parameter

* [node] Better error reporting when Ethereum node cannot be reached
2022-08-09 06:29:06 +02:00
Mark Spanbroek 698baeef35 [purchasing] Remove Purchase.selected
There no longer exists a single host that
is selected for a contract.
2022-08-08 14:00:55 +02:00
Mark Spanbroek 360c03e7c4 [contracts] Rename: maxPrice -> reward 2022-08-08 14:00:55 +02:00
Mark Spanbroek 6df0c9ab40 [integration] set expiry always to high value
Reasoning: a purchase is now completed when
the first proof comes in, so the test will no
longer wait until the request has expired.
2022-07-20 13:43:20 +02:00
Mark Spanbroek bd2fba50c7 [purchasing] Fix integration test 2022-07-20 13:43:20 +02:00
Michael Bradley, Jr 8f0bc54fba test: make `proc finish` async in "nodes negotiate ..." integration test
`waitFor` has been moved into the main body of integration test
`nodes negotiate ...` to reduce blockage on the main thread. That change, along
with widening the expiry in `when defined(windows)` (and bumping up
`timeout-minutes` in our CI workflow) allows Windows CI builds to succeed more
consistently, i.e. without timing out.
2022-07-06 19:03:10 -05:00
Dmitriy Ryajov 77733725bf
fix failing test after nim-ethers bump (#112) 2022-06-09 09:36:59 -06:00
Michael Bradley 209343087c
Change every dagger to codex (#102) 2022-05-19 13:56:03 -06:00
Mark Spanbroek 15a571387f [test] Give integration test a bit more time to complete
For slow windows CI runners.
2022-05-19 10:38:19 +02:00
Mark Spanbroek d6393de324 [test] Add integration test for sales and purchasing 2022-05-19 10:38:19 +02:00
Mark Spanbroek 43c0a48245 [tests] move node management into separate module
And add a debug option that writes the output of
the node during integration tests to stdout.
2022-05-19 10:38:19 +02:00
Mark Spanbroek b31ef8356b [purchasing] retrieve purchase details through REST API 2022-05-19 10:38:19 +02:00
Mark Spanbroek 7d03e83bfc [rest api] submit storage request parameters as json 2022-05-19 10:38:19 +02:00
Mark Spanbroek 11581fd12c [sales] REST endpoint that lists available storage 2022-05-19 09:36:47 +02:00
Mark Spanbroek ef80871984 [sales] Perform POST with JSON body instead of URL params 2022-05-19 09:36:47 +02:00
Mark Spanbroek 45c55ab2a8 [sales] Test sales rest api 2022-05-19 09:36:47 +02:00
Mark Spanbroek cc9a4e2af6 Add integration tests 2022-05-19 09:36:47 +02:00