* implement a logging proxy
The logging proxy:
- prevents the need to import chronicles (as well as export except toJson),
- prevents the need to override `writeValue` or use or import nim-json-seralization elsewhere in the codebase, allowing for sole use of utils/json for de/serialization,
- and handles json formatting correctly in chronicles json sinks
* Rename logging -> logutils to avoid ambiguity with common names
* clean up
* add setProperty for JsonRecord, remove nim-json-serialization conflict
* Allow specifying textlines and json format separately
Not specifying a LogFormat will apply the formatting to both textlines and json sinks.
Specifying a LogFormat will apply the formatting to only that sink.
* remove unneeded usages of std/json
We only need to import utils/json instead of std/json
* move serialization from rest/json to utils/json so it can be shared
* fix NoColors ambiguity
Was causing unit tests to fail on Windows.
* Remove nre usage to fix Windows error
Windows was erroring with `could not load: pcre64.dll`. Instead of fixing that error, remove the pcre usage :)
* Add logutils module doc
* Shorten logutils.formatIt for `NBytes`
Both json and textlines formatIt were not needed, and could be combined into one formatIt
* remove debug integration test config
debug output and logformat of json for integration test logs
* Use ## module doc to support docgen
* bump nim-poseidon2 to export fromBytes
Before the changes in this branch, fromBytes was likely being resolved by nim-stew, or other dependency. With the changes in this branch, that dependency was removed and fromBytes could no longer be resolved. By exporting fromBytes from nim-poseidon, the correct resolution is now happening.
* fixes to get compiling after rebasing master
* Add support for Result types being logged using formatIt
* implement a logging proxy
The logging proxy:
- prevents the need to import chronicles (as well as export except toJson),
- prevents the need to override `writeValue` or use or import nim-json-seralization elsewhere in the codebase, allowing for sole use of utils/json for de/serialization,
- and handles json formatting correctly in chronicles json sinks
* Rename logging -> logutils to avoid ambiguity with common names
* clean up
* add setProperty for JsonRecord, remove nim-json-serialization conflict
* Allow specifying textlines and json format separately
Not specifying a LogFormat will apply the formatting to both textlines and json sinks.
Specifying a LogFormat will apply the formatting to only that sink.
* remove unneeded usages of std/json
We only need to import utils/json instead of std/json
* move serialization from rest/json to utils/json so it can be shared
* fix NoColors ambiguity
Was causing unit tests to fail on Windows.
* Remove nre usage to fix Windows error
Windows was erroring with `could not load: pcre64.dll`. Instead of fixing that error, remove the pcre usage :)
* Add logutils module doc
* Shorten logutils.formatIt for `NBytes`
Both json and textlines formatIt were not needed, and could be combined into one formatIt
* remove debug integration test config
debug output and logformat of json for integration test logs
* Use ## module doc to support docgen
* Adds test for encoding/decoding protected manifest
* Setting up verifiable manifest
* mysterious mysteries
* Successful encoding test for verifiable manifests
* extracts toF out of users of manifest code
* Update codex/manifest/coders.nim
Co-authored-by: Dmitriy Ryajov <dryajov@gmail.com>
Signed-off-by: Ben Bierens <39762930+benbierens@users.noreply.github.com>
* Review comments by Dmitriy
* Adds missing verifiable print to $ method.
* Replace poseidon2 F type with int as temporary stand-in for verification hashes
* Replaces verification hash placeholder with CID
---------
Signed-off-by: Ben Bierens <39762930+benbierens@users.noreply.github.com>
Co-authored-by: Dmitriy Ryajov <dryajov@gmail.com>
* Blockexchange uses merkle root and index to fetch blocks
* Links the network store getTree to the local store.
* Update codex/stores/repostore.nim
Co-authored-by: Dmitriy Ryajov <dryajov@gmail.com>
Signed-off-by: Tomasz Bekas <tomasz.bekas@gmail.com>
* Rework erasure.nim to include recent cleanup
* Revert accidential changes to lib versions
* Addressing review comments
* Storing proofs instead of trees
* Fix a comment
* Fix broken tests
* Fix for broken testerasure.nim
* Addressing PR comments
---------
Signed-off-by: Tomasz Bekas <tomasz.bekas@gmail.com>
Co-authored-by: benbierens <thatbenbierens@gmail.com>
Co-authored-by: Dmitriy Ryajov <dryajov@gmail.com>
Goal is to provide documentation and to enable conf utils byte params.
* Create byte units NByte and plumb through in size locations.
* add json serde
* plumb parseDuration to conf
* Fixes/workarounds for nimsuggest failures in codex.nim.
* remove rng prefix - it appears to work now
* format new's to be more consistent
* making proc formatting a bit more consistent
* applying styleCheck
* stuck on vendor folder
* Applies style check
* Turns styleCheck back off
* switches to stylecheck:usages
* Fixes empty template casing
* rolls up nim-blscurve, nim-datastore, nim-ethers, nim-leopard, and nim-taskpools.
* bumps nim-confutils and removes unused import from fileutils.nim
* Unused using in fileutils.nim is required by CI
* Reverts bump of nim-confutils module
* [build] disable XCannotRaiseY hint
There are too many {.raises:[Defect].} in the
libraries that we use, drowning out all other
warnings and hints
* [build] disable BareExcept warning
Not yet enabled in a released version of Nim,
so libraries that we depend on have not fixed
this yet, drowning out our own hints and warnings
* [build] disable DotLikeOps warning
dot-like ops were an experiment that is not going
land in Nim
* [build] compile log statements in tests
When running tests, all log statements are compiled.
They are filtered out at runtime during a test run.
* [build] do not build executable when running unit test
It's already built in the integration test
* [build] Fix warnings
- remove unused code
- remove unused imports
- stop using deprecated stuff
* [build] Put compiler flags behind nim version checks
* [CI] remove Nim 1.2 compatibility
* initial implementation of repo store
* allow isManifest on multicodec
* rework with new blockstore
* add raw codec
* rework listBlocks
* remove fsstore
* reworking with repostore
* bump datastore
* fix listBlocks iterator
* adding store's common tests
* run common store tests
* remove fsstore backend tests
* bump datastore
* add `listBlocks` tests
* listBlocks filter based on block type
* disabling tests in need of rewriting
* allow passing block type
* move BlockNotFoundError definition
* fix tests
* increase default advertise loop sleep to 10 mins
* use `self`
* add cache quota functionality
* pass meta store and start repo
* add `CacheQuotaNamespace`
* pass meta store
* bump datastore to latest master
* don't use os `/` as key separator
* Added quota limits support
* tests for quota limits
* add block expiration key
* remove unnesesary space
* use idleAsync in listBlocks
* proper test name
* re-add contrlC try/except
* add storage quota and block ttl config options
* clarify comments
* change expires key format
* check for block presence before storing
* bump datastore
* use dht with fixed datastore `has`
* bump datastore to latest master
* bump dht to latest master
The initial goal of this patch was to allow to download of a file via REST API in exactly the same size as it was uploaded, which required adding fields Chunker.offset and Manifest.originalBytes to keep that size. On top of that, we added more integrity checks to operations on Manifest, and reorganized TestNode.nim to test the actual interaction between node.store and node.retrieve operations.
Note that the wire format of Manifest was changed, so we need to recreate all BlockStores.
* Download without padding
* Fixed chunker tests
* Chunker: get rid of RabinChunker
* Verify offset in the chunker tests
* Use manifest.originalBytesPadded in StoreStream.size
* StoreStream: replace emptyBlock with zeroMem
* Manifest.bytes: compute how many bytes corresponding StoreStream(Manifest, pad) will return
* Manifest: verify originalBytes and originalLen on new/encode/decode
Also set originalBytes in each Manifest creation/update scenario
* Manifest: comments, split code into sections
* Reordered parameters to deal with int64 size in 32-bit builds
* TestNode.nim: combine Store and Retrieve tests
1. Instead of copy-pasting code from node.nim, new test calls node.store() and node.retrieve() in order to check that they can correctly store and then retrieve data
2. New test compares only file contents, manifest contents considered an implementation detail
3. New test chunks at odd chunkSize=BlockSize/1.618 in order to ensure that data retrieved correctly even when buffer sizes mismatch
* TestNode.nim: code refactoring
* Manifest.add: one more test
* Manifest.verify: return Result instead of raising Defect
* Node.store: added blockSize parameter
Dmitriy Ryajov
Eric
Ben Bierens
Tomasz Bekas
Jaremy Creechley
markspanbroek
Bulat-Ziganshin
Michael Bradley