* Adds API for fetching manifest only and downloading dataset without stream
* Updates openapi.yaml
* Adds tests for downloading manifest-only and without stream.
* review comments by Giuliano
* updates test clients
* convert EthersError to MarketError
* change `canReserveSlot` and `reserveSlot` parameters
Parameters for `canReserveSlot` and `reserveSlot` were changed from `SlotId` to `RequestId` and `UInt256 slotIndex`.
* Add SaleSlotReserving
Adds a new state, SaleSlotReserving, that attempts to reserve a slot before downloading.
If the slot cannot be reserved, the state moves to SaleIgnored.
On error, the state moves to SaleErrored.
SaleIgnored is also updated to pass in `reprocessSlot` and `returnBytes`, controlling the behaviour in the Sales module after the slot is ignored. This is because previously it was assumed that SaleIgnored was only reached when there was no Availability. This is no longer the case, since SaleIgnored can now be reached when a slot cannot be reserved.
* Update SalePreparing
Specify `reprocessSlot` and `returnBytes` when moving to `SaleIgnored` from `SalePreparing`.
Update tests to include test for a raised CatchableError.
* Fix unit test
* Modify `canReserveSlot` and `reverseSlot` params after rebase
* Update MockMarket with new `canReserveSlot` and `reserveSlot` params
* fix after rebase
also bump codex-contracts-eth to master
* Adds validatorPartitionSize and validatorPartitionIndex config options
* adds partitioning options to the validation type
* adds partitioning logic to the validator
* ignores partitionIndex when partitionSize is either 0 or 1
* clips the partition index to <<partitionIndex mod partitionSize>>
* handles negative values for the validation partition index
* updates long description of the new validator cli options
* makes default partitionSize to be 0 for better backward compatibility
* Improving formatting on validator CLI
* reactors validation params into a separate type and simplifies validation of validation params
* removes suspected duplication
* fixes typo in validator CLI help
* updates README
* Applies review comments - using optionals and range types to handle validation params
* Adds initializer to the configFactory for validatorMaxSlots
* [Review] update validator CLI description and README
* [Review]: renaming validationParams to validationConfig (config)
* [Review]: move validationconfig.nim to a higher level (next to validation.nim)
* changes backing type of MaxSlots to be int and makes sure slots are validated without limit when maxSlots is set to 0
* adds more end-to-end test for the validator and the groups
* fixes typo in README and conf.nim
* makes `maxSlotsConstraintRespected` and `shouldValidateSlot` private + updates the tests
* fixes public address of the signer account in the marketplace tutorial
* applies review comments - removes two tests
* All sort of tweaks
* docs: availability's minPrice doc
* Revert changes to the two node test example
* Change default EC params in REST API
Change default EC params in REST API to 3 nodes and 1 tolerance.
Adjust integration tests to honour these settings.
---------
Co-authored-by: Eric <5089238+emizzle@users.noreply.github.com>
* Introduces a start method to prover
* Moves backend creation into start method
* sets up three paths for backend initialization
* Extracts backend initialization to backend-factory
* Implements loading backend from cli files or previously downloaded local files
* Wires up downloading and unzipping
* functional implementation
* Fixes testprover.nim
* Sets up tests for backendfactory
* includes libzip-dev
* pulls in updated contracts
* removes integration cli tests for r1cs, wasm, and zkey file arguments.
* Fixes issue where inner-scope values are lost before returning
* sets local proof verification for dist-test images
* Adds two traces and bumps nim-ethers
* Adds separate path for circuit files
* Create circuit dir if not exists
* fix: make sure requestStorage is mined
* fix: correct place to plug confirm
* test: fixing contracts tests
* Restores gitmodules
* restores nim-datastore reference
* Sets up downloader exe
* sets up tool skeleton
* implements getting of circuit hash
* Implements downloader tool
* sets up test skeleton
* Implements test for cirdl
* includes testTools in testAll
* Cleanup building.md
* cleans up previous downloader implementation
* cleans up testbackendfactory
* moves start of prover into node.nim
* Fills in arguments in example command
* Initializes backend in prover constructor
* Restores tests
* Restores tests for cli instructions
* Review comments by Dmitriy, part 1
* Quotes path in download instruction.
* replaces curl with chronos http session
* Moves cirdl build output to 'build' folder.
* Fixes chronicles log output
* Add cirdl support to the codex Dockerfile
Signed-off-by: Slava <20563034+veaceslavdoina@users.noreply.github.com>
* Add cirdl support to the docker entrypoint
Signed-off-by: Slava <20563034+veaceslavdoina@users.noreply.github.com>
* Add cirdl support to the release workflow
Signed-off-by: Slava <20563034+veaceslavdoina@users.noreply.github.com>
* Disable verify_circuit flag for releases
Signed-off-by: Slava <20563034+veaceslavdoina@users.noreply.github.com>
* Removes backendFactory placeholder type
* wip
* Replaces zip library with status-im/zippy library (which supports zip and tar)
* Updates cirdl to not change circuitdir folder
* Switches from zip to tar.gz
* Review comments by Dmitriy
* updates codex-contracts-eth
* Adds testTools to CI
* Adds check for access to config.circuitdir
* Update fixture circuit zkey
* Update matrix to run tools tests on Windows
* Adds 'deps' dependency for cirdl
* Adjust docker-entrypoint.sh to use CODEX_CIRCUIT_DIR env var
* Review comments by Giuliano
---------
Signed-off-by: Slava <20563034+veaceslavdoina@users.noreply.github.com>
Co-authored-by: Adam Uhlíř <adam@uhlir.dev>
Co-authored-by: Veaceslav Doina <20563034+veaceslavdoina@users.noreply.github.com>
* feat: add `--payout-address`
Allows SPs to be paid out to a separate address, keeping their profits secure.
Supports https://github.com/codex-storage/codex-contracts-eth/pull/144 in the nim-codex client.
* Remove optional payoutAddress
Change --payout-address so that it is no longer optional. There is no longer an overload in `Marketplace.sol` for `fillSlot` accepting no `payoutAddress`.
* Update integration tests to include --payout-address
* move payoutAddress from fillSlot to freeSlot
* Update integration tests to use required payoutAddress
- to make payoutAddress required, the integration tests needed to avoid building the cli params until just before starting the node, otherwise if cli params were added ad-hoc, there would be an error after a non-required parameter was added before a required parameter.
* support client payout address
- withdrawFunds requires a withdrawAddress parameter, directs payouts for withdrawing of client funds (for a cancelled request) to go to that address.
* fix integration test
adds --payout-address to validators
* refactor: support withdrawFunds and freeSlot optional parameters
- withdrawFunds has an optional parameter for withdrawRecipient
- freeSlot has optional parameters for rewardRecipient and collateralRecipient
- change --payout-address to --reward-recipient to match contract signature naming
* Revert "Update integration tests to include --payout-address"
This reverts commit 8f9535cf35b0f2b183ac4013a7ed11b246486964.
There are some valid improvements to the integration tests, but they can be handled in a separate PR.
* small fix
* bump contracts to fix marketplace spec
* bump codex-contracts-eth, now rebased on master
* bump codex-contracts-eth
now that feat/reward-address has been merged to master
* clean up, comments
* refactor(marketplace): move marketplace events to the Market abstraction
Move marketplace contract events to the Market abstraction so the types can be shared across all modules that call the Market abstraction.
* Remove unneeded conversion
* Switch to generic implementation of event querying
* change parent type to MarketplaceEvent
* add changes to use chronos v4 in compat mode
* switch chronos to compat fix branch
* use nimbus-build-system with configurable Nim repo
* add missing imports
* add missing await
* bump compat
* pin nim version in Makefile
* add await instead of asyncSpawn to advertisement queue loop
* bump DHT to v0.5.0
* allow error state of `onBatch` to propagate upwards in test code
* pin Nim compiler commit to avoid fetching stale branch
* make CI build against branch head instead of merge
* fix handling of return values in testslotqueue
* add logs and test
* add Merkle proof checks
* factor out Circom input normalization, fix proof input serialization
* add test and update existing ones
* update circuit assets
* add back trace message
* switch contracts to fix branch
* update codex-contracts-eth to latest
* do not expose prove with prenormalized inputs
* Rest API: add erasure coding constraints when requesting storage
* clean up
* Make error message for "dataset too small" more informative.
* fix API integration test
---------
Co-authored-by: gmega <giuliano.mega@gmail.com>
* Fix verifiable manifest constructor
* Add integration test for verifiable manifest download
Add integration test for testing download of verifiable dataset after creating request for storage
* add missing import
* add testecbug to integration suite
* Remove hardhat instance from integration test
* change description, drop echo
---------
Co-authored-by: Eric <5089238+emizzle@users.noreply.github.com>
Co-authored-by: gmega <giuliano.mega@gmail.com>
* fix verifiable manifest initialization
* fix linearstrategy, use verifiableStrategy to select blocks for slots
* check for both strategies in attribute inheritance test
* Rework AsyncIter
* Add tests for finishing iter on error
* Improved error handling for and additional tests
* Use new style of constructors
* Handle future cancellation
* Docs for constructors
* pulls in datastore-leveldb update
* bump
* Applies LevelDb as metadata store. Adds option for repostore.
* Sets submodule to main branch
* I can do syntax, me
* Removes wildcard from metadata query key
* Applies leveldb instead of sqlite-in-memory for tests
* Restores query key wildcard.
* Pins nim-datastore to latest master
* bumps leveldb to 0.1.4
---------
Co-authored-by: Dmitriy Ryajov <dryajov@gmail.com>
* add seen flag
* Add MockSlotQueueItem and better prioritisation tests
* Update seen priority, and include in SlotQueueItem.init
* Re-add processed slots to queue
Re-add processed slots to queue if the sale was ignored or errored
* add pausing of queue
- when processing slots in queue, pause queue if item was marked seen
- if availability size is increased, trigger onAvailabilityAdded callback
- in sales, on availability added, clear 'seen' flags, then unpause the queue
- when items pushed to the queue, unpause the queue
* remove unused NoMatchingAvailabilityError from slotqueue
The slot queue should also have nothing to do with availabilities
* when all availabilities are empty, pause the queue
An empty availability is defined as size < DefaultBlockSize as this means even the smallest possible request could not be served. However, this is up for discussion.
* remove availability from onAvailabilitiesEmptied callback
* refactor onAvailabilityAdded and onAvailabilitiesEmptied
onAvailabilityAdded and onAvailabilitiesEmptied are now only called from reservations.update (and eventually reservations.delete once implemented).
- Add empty routine for Availability and Reservation
- Add allEmpty routine for Availability and Reservation, which returns true when all all Availability or Reservation objects in the datastore are empty.
* SlotQueue test support updates
* Sales module test support updates
* Reservations module tests for queue pausing
* Sales module tests for queue pausing
Includes tests for sales states cancelled, errored, ignored to ensure onCleanUp is called with correct parameters
* SlotQueue module tests for queue pausing
* fix existing sales test
* PR feedback
- indent `self.unpause`
- update comment for `clearSeenFlags`
* reprocessSlot in SaleErrored only when coming from downloading
* remove pausing of queue when availabilities are "emptied"
Queue pausing when all availiabilies are "emptied" is not necessary, given that the node would not be able to service slots once all its availabilities' freeSize are too small for the slots in the queue, and would then be paused anyway.
Add test that asserts the queue is paused once the freeSpace of availabilities drops too low to fill slots in the queue.
* Update clearing of seen flags
The asyncheapqueue update overload would need to check index bounds and ultimately a different solution was found using the mitems iterator.
* fix test
request.id was different before updating request.ask.slots, and that id was used to set the state in mockmarket.
* Change filled/cleanup future to nil, so no await is needed
* add wait to allow items to be added to queue
* do not unpause queue when seen items are pushed
* re-add seen item back to queue once paused
Previously, when a seen item was processed, it was first popped off the queue, then the queue was paused waiting to process that item once the queue was unpaused. Now, when a seen item is processed, it is popped off the queue, the queue is paused, then the item is re-added to the queue and the queue will wait until unpaused before it will continue popping items off the queue. If the item was not re-added to the queue, it would have been processed immediately once unpaused, however there may have been other items with higher priority pushed to the queue in the meantime. The queue would not be unpaused if those added items were already seen. In particular, this may happen when ignored items due to lack of availability are re-added to a paused queue. Those ignored items will likely have a higher priority than the item that was just seen (due to it having been processed first), causing the queue to the be paused.
* address PR comments
* integration: move REST API tests into their own module
* integration: move upload and download tests into their own module
* integration: move purchasing tests into their own module
* integration: move marketplace tests to the right module
* integration: mine a block *after* starting nodes
To ensure that tests involving multiple nodes do
not start with out-of-sync clocks
* Fix: do not swallow CancellationErrors
* integration: avoid underflow in UInt256
* network: remove unnecessary error handling
No Exceptions can occur, only Defects, because everything
is asyncSpawned.
Co-authored-by: Dmitriy Ryajov <dryajov@gmail.com>
* network: do not raise in asyncSpawned proc
Co-authored-by: Dmitriy Ryajov <dryajov@gmail.com>
---------
Co-authored-by: Dmitriy Ryajov <dryajov@gmail.com>
* fix: make sure requestStorage is mined
* fix: correct place to plug confirm
* test: fixing contracts tests
* feat: one confirmation for all transactions
* fix: don't wait for confirmations only mined block
* Aligns response with openapi spec
* Fixes json serialization for local content response
* Review comments by Mark
* Fixes missed rename
* Removes array type for dataList
* json > nim-serde bump
Should wait until serde is integrated into nim-ethers before making these changes as there will be less import exceptions required.
* bump nim-serde
* change func to proc due to chronicles side effects
* import serde into utils/json, use as proxy
import nim-serde into utils/json and use utils/json as a proxy for serde functions, including overloading `%` and `fromJson` for application types.
* update tests to use serde
* bump serde to latest
* remove testjson -- no longer needed
* bump serde in nimble
* updates to reconcile rebase with master
* use a real verifying contract address
* contracts: cleanup
* marketplacesuite: set correct circuit files, interval mining
* Proofs tests updates
Contains changes to get the proving tests working reliably.
* integration: use correct circom artifacts for creating proofs
* integration: cleanup
---------
Co-authored-by: Dmitriy Ryajov <dryajov@gmail.com>
Co-authored-by: Eric <5089238+emizzle@users.noreply.github.com>
* wire prover into node
* stricter case object checks
* return correct proof
* misc renames
* adding usefull traces
* fix nodes and tolerance to match expected params
* format challenges in logs
* add circom compat to solidity groth16 convertion
* update
* bump time to give nodes time to load with all circom artifacts
* misc
* misc
* use correct dataset geometry in erasure
* make errors more searchable
* use parens around `=? (await...)` calls
* styling
* styling
* use push raises
* fix to match constructor arguments
* merge master
* merge master
* integration: fix proof parameters for a test
Increased times due to ZK proof generation.
Increased storage requirement because we're now hosting
5 slots instead of 1.
* sales: calculate initial proof at start of period
reason: this ensures that the period (and therefore
the challenge) doesn't change while we're calculating
the proof
* integration: fix proof parameters for tests
Increased times due to waiting on next period.
Fixed data to be of right size.
Updated expected payout due to hosting 5 slots.
* sales: wait for stable proof challenge
When the block pointer is nearing the
wrap-around point, we wait another period
before calculating a proof.
* fix merge conflict
---------
Co-authored-by: Dmitriy Ryajov <dryajov@gmail.com>
Co-authored-by: Eric <5089238+emizzle@users.noreply.github.com>
* rework cli to accept circuit params
* check circom files extension
* adding new required cli changes
* don't use ufcs
* persistence is a command now
* use `nimOldCaseObjects` switch for nim confutils compat
* misc
* Update cli integration tests
* Fix: simulateProofFailures option is not for validator
* moving circom params under `prover` command
* update tests
* Use circuit assets from codex-contract-eth in tests
* Add "prover" cli command to tests
* use correct stores
* make `verifier` a cmd option
* update circuit artifacts path
* fix cli tests
* Update integration tests to use cli commands
Integration tests have been updated to use the new cli commands. The api for usage in the integration tests has also changed a bit.
Proofs tests have been updated to use 5 nodes and 8 blocks of data. The remaining integration tests also need to be updated.
* remove parsedCli from CodexConfig
Instead, parse the cli args on the fly when needed
* remove unneeded gcsafes
* graceful shutdowns
Where possible, do not raise assert, as other nodes in the test may already be running. Instead, raise exceptions, catch them in multinodes.nim, and attempt to do a teardown before failing the test.
`abortOnError` is set to true so that `fail()` will quit immediately, after teardown has been run.
* update testmarketplace to new api, with valid EC params
---------
Co-authored-by: Dmitriy Ryajov <dryajov@gmail.com>
Co-authored-by: Eric <5089238+emizzle@users.noreply.github.com>
* Update codex-contracts-eth
* contracts: update G2Point definition
* integration: disable automatic advancing of time
reason: makes reasoning about timing in tests harder,
because the period is set to 60 seconds in the
marketplace configuration, but this code switches to
a new period every 500 milliseconds
* integration: fix parameters of marketplace payouts test
* integration: update test settings
* integration: fix typo
* integration: workaround for hardhat issue
Subscriptions expire after 5 minutes when using
websockets. Use http and polling instead.
* integration: remove origDatasetSizeInBlocks
* integration: fix proof parameters for test
* integration: do not log output by default
* integration: fix failure rate in test
* integration: fix warning
* integration: include clock in logs
* integration: allow for more periods
5 periods was cutting it close, if we get too much
pointer downtime, then the test would fail
* clock: add 1 second leeway before acting on timeouts
* sales: do not raise in proving loop when slot is cancelled
Allow the onCancelled callback to handle cancellation, and
the onFailed callback to handle failed requests.
* sales: cleanup proving tests
* sales: fix sales agent tests
* sales: stop cancellation loop when request started, finished or failed
* sales: fix flaky test
* sales: fix another flaky test
* clock: add comment explaining the + 1 second
Co-Authored-By: benbierens <thatbenbierens@gmail.com>
---------
Co-authored-by: benbierens <thatbenbierens@gmail.com>
* market: use `pending` blocktag when querying onchain state
* clock: use wall clock in integration tests
reason: we'll need to wait for the next period in
integration tests, and we can't do that if the
time doesn't advance
* clock: remove unused field
* integration: use pending block time to get current time
* clock: fix on-chain clock for hardhat
Only use 'latest' block for updates
Only update the first time you see a block
* integration: do not start tests with a very outdated block
* integration: allow for longer expiry period
* Applies peer-scoped lock to peer task handler.
* Replace async lock with delete-first approach.
* Cleanup some logging
* Adds inFlight flag to WantListEntry
* Clears inflight flag when local retrieval fails.
* Adds test for setting of in-flight
* Adds test for clearing in-flight when lookup fails
* Review comments by Tomasz
---------
Co-authored-by: gmega <giuliano.mega@gmail.com>
* add block cancellation support + tests
* tie issueCancellations into resolveBlocks for proper exception tracking, address comments
* pull cancellation as separate primitive in BlockExcNetwork
* use allFutures, rename issueBlockCancellations -> cancelBlocks
* use trc instead of wrn to register send error
* do not log peer IDs
* rework backend to instantiate key at initialization
* add groth16 convertes for solidity
* prover taks num samples on construction
* add zkey file
* rework helpers
* rename types
* update tests
* reworked test helpers
* rename types
* rework test
* test all slots artifacts
* bump to latest version
* don't pass erasure
* use correct stores and construct erasure inside the node
* fix tests to match new constructor
* remove prover argument
* review commets
* revert failing on no-prover for now
* small cleanup
* comment out invalid proofs broken test
* refactor multi node test suite
Refactor the multinode test suite into the marketplace test suite.
- Arbitrary number of nodes can be started with each test: clients, providers, validators
- Hardhat can also be started locally with each test, usually for the purpose of saving and inspecting its log file.
- Log files for all nodes can be persisted on disk, with configuration at the test-level
- Log files, if persisted (as specified in the test), will be persisted to a CI artifact
- Node config is specified at the test-level instead of the suite-level
- Node/Hardhat process starting/stopping is now async, and runs much faster
- Per-node config includes:
- simulating proof failures
- logging to file
- log level
- log topics
- storage quota
- debug (print logs to stdout)
- Tests find next available ports when starting nodes, as closing ports on Windows can lag
- Hardhat is no longer required to be running prior to starting the integration tests (as long as Hardhat is configured to run in the tests).
- If Hardhat is already running, a snapshot will be taken and reverted before and after each test, respectively.
- If Hardhat is not already running and configured to run at the test-level, a Hardhat process will be spawned and torn down before and after each test, respectively.
* additional logging for debug purposes
* address PR feedback
- fix spelling
- revert change from catching ProviderError to SignerError -- this should be handled more consistently in the Market abstraction, and will be handled in another PR.
- remove method label from raiseAssert
- remove unused import
* Use API instead of command exec to test for free port
Use chronos `createStreamServer` API to test for free port by binding localhost address and port. Use `ServerFlags.ReuseAddr` to enable reuse of same IP/Port on multiple test runs.
* clean up
* remove upraises annotations from tests
* Update tests to work with updated erasure coding slot sizes
* update dataset size, nodes, tolerance to match valid ec params
Integration tests now have valid dataset sizes (blocks), tolerances, and number of nodes, to work with valid ec params. These values are validated when requested storage.
Print the rest api failure message (via doAssert) when a rest api call fails (eg the rest api may validate some ec params).
All integration tests pass when the async `clock.now` changes are reverted.
* dont use async clock for now
* fix workflow
* move integration logs uplod to reusable
---------
Co-authored-by: Dmitriy Ryajov <dryajov@gmail.com>
Ben Bierens
Adam Uhlíř
Eric
Marcin Czenko
Giuliano Mega
Tomasz Bekas
markspanbroek
Dmitriy Ryajov