* Sets timeout for codexclient httpClient. Adds reliable transfer test.
* disable new test to check timeout setting in CI
* restores new test
* adds heartbeat log and logfile to ci output
* fixes suite
* fixes blocked output stream by switching to multinode fixture
* new twonodessuite based on multinodesuite
* Applies updated twonodessuite
* removes heartbeat log
* applies multinodesuite in testsales
* applies multinodesuite in testmarketplace
* fixes account fetch for host and client in testmarketplace
* adds waitTillNextPeriod at end of marketplace test
* Uses marketplacesuite in testmarketplace
* Use http subscriptions instead of websocket for tests
To work around this issue when subscriptions are
inactive for more than 5 minutes:
https://github.com/NomicFoundation/hardhat/issues/2053
Use 100 millisecond polling; default polling interval
of 4 seconds is too close to the 5 second timeout for
`check eventually`.
* use .confirm(1) instead of confirm(0)
confirm(0) doesn't wait at all, confirm(1) waits
for the transaction to be mined
* speed up partial payout integration test
* update nim-ethers to version 0.10.0
includes fixes for http polling and .confirm()
* fix timing of marketplace tests
allow for a bit more time to withdraw funds
* use .confirm(1) in marketplace tests
to ensure that the transaction has been processed
before continuing with the test
* fix timing issue in validation unit test
* fix proof integration test
there were two logic errors in this test:
- a slot is freed anyway at the end of the contract
- when starting the request takes a long time, the
first slot can already be freed because there were
too many missing proofs
* fix intermittent error in contract tests
currentTime() doesn't always correctly reflect
the time of the next transaction
* reduce number of slots in integration test
otherwise the windows runner in the CI won't
be able to start the request before it expires
* fix timing in purchasing test
allow for a bit more time for a request to
be submitted
* fix timing of request submission in test
windows ci is so slow, it can take up to 40 seconds
just to submit a storage request to hardhat
* increase proof period to 90 seconds
* adjust timing of integration tests
reason: with the increased period length of 90 seconds, it
can take longer to wait for a stable challenge at the
beginning of a period.
* increase CI timeout to 2 hours
* Fix slow builds on windows
apparently it takes windows 2-3 seconds to
resolve "localhost" to 127.0.0.1 for every
json-rpc connection that we make 🤦
* integration: move REST API tests into their own module
* integration: move upload and download tests into their own module
* integration: move purchasing tests into their own module
* integration: move marketplace tests to the right module
* integration: mine a block *after* starting nodes
To ensure that tests involving multiple nodes do
not start with out-of-sync clocks
* Fix: do not swallow CancellationErrors
* integration: avoid underflow in UInt256
* network: remove unnecessary error handling
No Exceptions can occur, only Defects, because everything
is asyncSpawned.
Co-authored-by: Dmitriy Ryajov <dryajov@gmail.com>
* network: do not raise in asyncSpawned proc
Co-authored-by: Dmitriy Ryajov <dryajov@gmail.com>
---------
Co-authored-by: Dmitriy Ryajov <dryajov@gmail.com>
* json > nim-serde bump
Should wait until serde is integrated into nim-ethers before making these changes as there will be less import exceptions required.
* bump nim-serde
* change func to proc due to chronicles side effects
* import serde into utils/json, use as proxy
import nim-serde into utils/json and use utils/json as a proxy for serde functions, including overloading `%` and `fromJson` for application types.
* update tests to use serde
* bump serde to latest
* remove testjson -- no longer needed
* bump serde in nimble
* updates to reconcile rebase with master
* rework cli to accept circuit params
* check circom files extension
* adding new required cli changes
* don't use ufcs
* persistence is a command now
* use `nimOldCaseObjects` switch for nim confutils compat
* misc
* Update cli integration tests
* Fix: simulateProofFailures option is not for validator
* moving circom params under `prover` command
* update tests
* Use circuit assets from codex-contract-eth in tests
* Add "prover" cli command to tests
* use correct stores
* make `verifier` a cmd option
* update circuit artifacts path
* fix cli tests
* Update integration tests to use cli commands
Integration tests have been updated to use the new cli commands. The api for usage in the integration tests has also changed a bit.
Proofs tests have been updated to use 5 nodes and 8 blocks of data. The remaining integration tests also need to be updated.
* remove parsedCli from CodexConfig
Instead, parse the cli args on the fly when needed
* remove unneeded gcsafes
* graceful shutdowns
Where possible, do not raise assert, as other nodes in the test may already be running. Instead, raise exceptions, catch them in multinodes.nim, and attempt to do a teardown before failing the test.
`abortOnError` is set to true so that `fail()` will quit immediately, after teardown has been run.
* update testmarketplace to new api, with valid EC params
---------
Co-authored-by: Dmitriy Ryajov <dryajov@gmail.com>
Co-authored-by: Eric <5089238+emizzle@users.noreply.github.com>
* implement a logging proxy
The logging proxy:
- prevents the need to import chronicles (as well as export except toJson),
- prevents the need to override `writeValue` or use or import nim-json-seralization elsewhere in the codebase, allowing for sole use of utils/json for de/serialization,
- and handles json formatting correctly in chronicles json sinks
* Rename logging -> logutils to avoid ambiguity with common names
* clean up
* add setProperty for JsonRecord, remove nim-json-serialization conflict
* Allow specifying textlines and json format separately
Not specifying a LogFormat will apply the formatting to both textlines and json sinks.
Specifying a LogFormat will apply the formatting to only that sink.
* remove unneeded usages of std/json
We only need to import utils/json instead of std/json
* move serialization from rest/json to utils/json so it can be shared
* fix NoColors ambiguity
Was causing unit tests to fail on Windows.
* Remove nre usage to fix Windows error
Windows was erroring with `could not load: pcre64.dll`. Instead of fixing that error, remove the pcre usage :)
* Add logutils module doc
* Shorten logutils.formatIt for `NBytes`
Both json and textlines formatIt were not needed, and could be combined into one formatIt
* remove debug integration test config
debug output and logformat of json for integration test logs
* Use ## module doc to support docgen
* bump nim-poseidon2 to export fromBytes
Before the changes in this branch, fromBytes was likely being resolved by nim-stew, or other dependency. With the changes in this branch, that dependency was removed and fromBytes could no longer be resolved. By exporting fromBytes from nim-poseidon, the correct resolution is now happening.
* fixes to get compiling after rebasing master
* Add support for Result types being logged using formatIt
* implement a logging proxy
The logging proxy:
- prevents the need to import chronicles (as well as export except toJson),
- prevents the need to override `writeValue` or use or import nim-json-seralization elsewhere in the codebase, allowing for sole use of utils/json for de/serialization,
- and handles json formatting correctly in chronicles json sinks
* Rename logging -> logutils to avoid ambiguity with common names
* clean up
* add setProperty for JsonRecord, remove nim-json-serialization conflict
* Allow specifying textlines and json format separately
Not specifying a LogFormat will apply the formatting to both textlines and json sinks.
Specifying a LogFormat will apply the formatting to only that sink.
* remove unneeded usages of std/json
We only need to import utils/json instead of std/json
* move serialization from rest/json to utils/json so it can be shared
* fix NoColors ambiguity
Was causing unit tests to fail on Windows.
* Remove nre usage to fix Windows error
Windows was erroring with `could not load: pcre64.dll`. Instead of fixing that error, remove the pcre usage :)
* Add logutils module doc
* Shorten logutils.formatIt for `NBytes`
Both json and textlines formatIt were not needed, and could be combined into one formatIt
* remove debug integration test config
debug output and logformat of json for integration test logs
* Use ## module doc to support docgen
* [docs] fix two client scenario: add missing collateral
* [integration] separate step to wait for node to be started
* [cli] add option to specify ethereum private key
* Remove unused imports
* Fix warnings
* [integration] move type definitions to correct place
* [integration] wait a bit longer for a node to start in debug mode
When e.g. running against Taiko test net rpc, the node start
takes longer
* [integration] simplify handling of codex node and client
* [integration] add Taiko integration test
* [contracts] await token approval confirmation before next tx
* [contracts] deployment address of marketplace on Taiko
* [cli] --eth-private-key now takes a file name
Instead of supplying the private key on the command line,
expect the private key to be in a file with the correct
permissions.
* [utils] Fixes undeclared `activeChroniclesStream` on Windows
* [build] update nim-ethers to include PR #52
Co-authored-by: Eric Mastro <eric.mastro@gmail.com>
* [cli] Better error messages when reading eth private key
Co-authored-by: Eric Mastro <eric.mastro@gmail.com>
* [integration] simplify reading of cmd line arguments
Co-authored-by: Eric Mastro <eric.mastro@gmail.com>
* [build] update to latest version of nim-ethers
* [contracts] updated contract address for Taiko L2
* [build] update codex contracts to latest version
---------
Co-authored-by: Eric Mastro <eric.mastro@gmail.com>