* Aligns response with openapi spec
* Fixes json serialization for local content response
* Review comments by Mark
* Fixes missed rename
* Removes array type for dataList
* json > nim-serde bump
Should wait until serde is integrated into nim-ethers before making these changes as there will be less import exceptions required.
* bump nim-serde
* change func to proc due to chronicles side effects
* import serde into utils/json, use as proxy
import nim-serde into utils/json and use utils/json as a proxy for serde functions, including overloading `%` and `fromJson` for application types.
* update tests to use serde
* bump serde to latest
* remove testjson -- no longer needed
* bump serde in nimble
* updates to reconcile rebase with master
* implement a logging proxy
The logging proxy:
- prevents the need to import chronicles (as well as export except toJson),
- prevents the need to override `writeValue` or use or import nim-json-seralization elsewhere in the codebase, allowing for sole use of utils/json for de/serialization,
- and handles json formatting correctly in chronicles json sinks
* Rename logging -> logutils to avoid ambiguity with common names
* clean up
* add setProperty for JsonRecord, remove nim-json-serialization conflict
* Allow specifying textlines and json format separately
Not specifying a LogFormat will apply the formatting to both textlines and json sinks.
Specifying a LogFormat will apply the formatting to only that sink.
* remove unneeded usages of std/json
We only need to import utils/json instead of std/json
* move serialization from rest/json to utils/json so it can be shared
* fix NoColors ambiguity
Was causing unit tests to fail on Windows.
* Remove nre usage to fix Windows error
Windows was erroring with `could not load: pcre64.dll`. Instead of fixing that error, remove the pcre usage :)
* Add logutils module doc
* Shorten logutils.formatIt for `NBytes`
Both json and textlines formatIt were not needed, and could be combined into one formatIt
* remove debug integration test config
debug output and logformat of json for integration test logs
* Use ## module doc to support docgen
* bump nim-poseidon2 to export fromBytes
Before the changes in this branch, fromBytes was likely being resolved by nim-stew, or other dependency. With the changes in this branch, that dependency was removed and fromBytes could no longer be resolved. By exporting fromBytes from nim-poseidon, the correct resolution is now happening.
* fixes to get compiling after rebasing master
* Add support for Result types being logged using formatIt
* implement a logging proxy
The logging proxy:
- prevents the need to import chronicles (as well as export except toJson),
- prevents the need to override `writeValue` or use or import nim-json-seralization elsewhere in the codebase, allowing for sole use of utils/json for de/serialization,
- and handles json formatting correctly in chronicles json sinks
* Rename logging -> logutils to avoid ambiguity with common names
* clean up
* add setProperty for JsonRecord, remove nim-json-serialization conflict
* Allow specifying textlines and json format separately
Not specifying a LogFormat will apply the formatting to both textlines and json sinks.
Specifying a LogFormat will apply the formatting to only that sink.
* remove unneeded usages of std/json
We only need to import utils/json instead of std/json
* move serialization from rest/json to utils/json so it can be shared
* fix NoColors ambiguity
Was causing unit tests to fail on Windows.
* Remove nre usage to fix Windows error
Windows was erroring with `could not load: pcre64.dll`. Instead of fixing that error, remove the pcre usage :)
* Add logutils module doc
* Shorten logutils.formatIt for `NBytes`
Both json and textlines formatIt were not needed, and could be combined into one formatIt
* remove debug integration test config
debug output and logformat of json for integration test logs
* Use ## module doc to support docgen
* Add get active slot /slots/{slotId} to REST api, use utils/json
- Add endpoint /slots/{slotId} to get an active SalesAgent from the Sales module. Used in integration tests to test when a sale has reached a certain state. Those integration test changes will be included in a larger PR, coming later.
- Add OpenAPI changes for new endpoint and associated components
- Use utils/json instead of nim-json-serialization. Required exemption of imports from several packages that export nim-json-serialization by default.
* Only except `toJson` from import/export of chronicles
* Adds endpoint for listing files (manifests) in node. Useful for demo UI.
* Moves upload/download/files into content API calls.
* Cleans up json serialization for manifest
* Cleans up some more json serialization
* Moves block iteration and decoding to node.nim
* Moves api methods into their own init procs.
* Applies RestContent api object.
* Replaces format methods with Rest objects in json.nim
* Unused import
* Review comments by Adam
* Fixes issue where content/local endpoint clashes with content/cid.
* faulty merge resolution
* Renames content API to data.
* Fixes faulty rebase
* Adds test for data/local API
* Renames local and download api.
* Improve integration testing client (CodexClient) and json serialization
The current client used for integration testing against the REST endpoints for Codex accepts and passes primitive types. This caused a hard to diagnose bug where a `uint` was not being deserialized correctly.
In addition, the json de/serializing done between the CodexClient and REST client was not easy to read and was not tested.
These changes bring non-primitive types to most of the CodexClient functions, allowing us to lean on the compiler to ensure we're providing correct typings. More importantly, a json de/serialization util was created as a drop-in replacement for the std/json lib, with the main two differences being that field serialization is opt-in (instead of opt-out as in the case of json_serialization) and serialization errors are captured and logged, making debugging serialization issues much easier.
* Update integration test to use nodes=2 and tolerance=1
* clean up
* Fixes/workarounds for nimsuggest failures in codex.nim.
* remove rng prefix - it appears to work now
* format new's to be more consistent
* making proc formatting a bit more consistent
* [state machine] Allow querying of state properties
* [purchasing] use new state machine
* [state machine] remove old state machine implementation
* [purchasing] remove duplication in error handling
* [marketplace] reservations module
- add de/serialization for Availability
- add markUsed/markUnused in persisted availability
- add query for unused
- add reserve/release
- reservation module tests
- split ContractInteractions into client contracts and host contracts
- remove reservations start/stop as the repo start/stop is being managed by the node
- remove dedicated reservations metadata store and use the metadata store from the repo instead
- Split ContractInteractions into:
- ClientInteractions (with purchasing)
- HostInteractions (with sales and proving)
- compilation fix for nim 1.2
[repostore] fix started flag, add tests
[marketplace] persist slot index
For loading the sales state from chain, the slot index was not previously persisted in the contract. Will retrieve the slot index from the contract when the sales state is loaded.
* Revert repostore changes
In favour of separate PR https://github.com/status-im/nim-codex/pull/374.
* remove warnings
* clean up
* tests: stop repostore during teardown
* change constructor type identifier
Change Contracts constructor to accept Contracts type instead of ContractInteractions.
* change constructor return type to Result instead of Option
* fix and split interactions tests
* clean up, fix tests
* find availability by slot id
* remove duplication in host/client interactions
* add test for finding availability by slotId
* log instead of raiseAssert when failed to mark availability as unused
* move to SaleErrored state instead of raiseAssert
* remove unneeded reverse
It appears that order is not preserved in the repostore, so reversing does not have the intended effect here.
* update open api spec for potential rest endpoint errors
* move functions about available bytes to repostore
* WIP: reserve and release availabilities as needed
WIP: not tested yet
Availabilities are marked as used when matched (just before downloading starts) so that future matching logic does not match an availability currently in use.
As the download progresses, batches of blocks are written to disk, and the equivalent bytes are released from the reservation module. The size of the availability is reduced as well.
During a reserve or release operation, availability updates occur after the repo is manipulated. If the availability update operation fails, the reserve or release is rolled back to maintain correct accounting of bytes.
Finally, once download completes, or if an error occurs, the availability is marked as unused so future matching can occur.
* delete availability when all bytes released
* fix tests + cleanup
* remove availability from SalesContext callbacks
Availability is no longer used past the SaleDownloading state in the state machine. Cleanup of Availability (marking unused) is handled directly in the SaleDownloading state, and no longer in SaleErrored or SaleFinished. Likewise, Availabilities shouldn’t need to be handled on node restart.
Additionally, Availability was being passed in SalesContext callbacks, and now that Availability is only used temporarily in the SaleDownloading state, Availability is contextually irrelevant to the callbacks, except in OnStore possibly, though it was not being consumed.
* test clean up
* - remove availability from callbacks and constructors from previous commit that needed to be removed (oopsie)
- fix integration test that checks availabilities
- there was a bug fixed that crashed the node due to a missing `return success` in onStore
- the test was fixed by ensuring that availabilities are remaining on the node, and the size has been reduced
- change Availability back to non-ref object and constructor back to init
- add trace logging of all state transitions in state machine
- add generally useful trace logging
* fixes after rebase
1. Fix onProve callbacks
2. Use Slot type instead of tuple for retrieving active slot.
3. Bump codex-contracts-eth that exposes getActivceSlot call.
* swap contracts branch to not support slot collateral
Slot collateral changes in the contracts require further changes in the client code, so we’ll skip those changes for now and add in a separate commit.
* modify Interactions and Deployment constructors
- `HostInteractions` and `ClientInteractions` constructors were simplified to take a contract address and no overloads
- `Interactions` prepared simplified so there are no overloads
- `Deployment` constructor updated so that it takes an optional string parameter, instead `Option[string]`
* Move `batchProc` declaration
`batchProc` needs to be consumed by both `node` and `salescontext`, and they can’t reference each other as it creates a circular dependency.
* [reservations] rename `available` to `hasAvailable`
* [reservations] default error message to inner error msg
* add SaleIngored state
When a storage request is handled but the request does match availabilities, the sales agent machine is sent to the SaleIgnored state. In addition, the agent is constructed in a way that if the request is ignored, the sales agent is removed from the list of active agents being tracked in the sales module.
* applying styleCheck
* stuck on vendor folder
* Applies style check
* Turns styleCheck back off
* switches to stylecheck:usages
* Fixes empty template casing
* rolls up nim-blscurve, nim-datastore, nim-ethers, nim-leopard, and nim-taskpools.
* bumps nim-confutils and removes unused import from fileutils.nim
* Unused using in fileutils.nim is required by CI
* Reverts bump of nim-confutils module
* [purchasing] Simplify test
* [utils] Move StorageRequest.example up one level
* [purchasing] Load purchases from market
* [purchasing] load purchase states
* Implement myRequest() and getState() methods for OnChainMarket
* [proofs] Fix intermittently failing tests
Ensures that examples of proofs in tests are never of length 0;
these are considered invalid proofs by the smart contract logic.
* [contracts] Fix failing test
With the new solidity contracts update, a contract can only
be paid out after it started.
* [market] Add method to get request end time
* [purchasing] wait until purchase is finished
Purchase.wait() would previously wait until purchase
was started, now we wait until it is finished.
* [purchasing] Handle 'finished' and 'failed' states
* [marketplace] move to failed state once request fails
- Add support for subscribing to request failure events.
- Add supporting contract tests for subscribing to request failure events.
- Allow the PurchaseStarted state to move to PurchaseFailure once a request failure event is emitted
- Add supporting tests for moving from PurchaseStarted to PurchaseFailure
- Add state transition tests for PurchaseUnknown.
* [marketplace] Fix test with longer sleepAsync
* [integration] Add function to restart a codex node
* [purchasing] Set client address before requesting storage
To prevent the purchase id (which equals the request id)
from changing once it's been submitted.
* [contracts] Fix: OnChainMarket.getState()
Had the wrong method signature before
* [purchasing] Load purchases on node start
* [purchasing] Rename state 'PurchaseError' to 'PurchaseErrored'
Allows for an exception type called 'PurchaseError'
* [purchasing] Load purchases in background
No longer calls market.getRequest() for every purchase
on node start.
* [contracts] Add `$` for RequestId, SlotId and Nonce
To aid with debugging
* [purchasing] Add Purchasing.stop()
To ensure that all contract interactions have both a
start() and a stop() for
* [tests] Remove sleepAsync where possible
Use `eventually` loop instead, to make sure that we're
not waiting unnecessarily.
* [integration] Fix: handle non-json response in test
* [purchasing] Add purchase state to json
* [integration] Ensure that purchase is submitted before restart
Fixes test failure on slower CI
* [purchasing] re-implement `description` as method
Allows description to be set in the same module where the
state type is defined.
Co-authored-by: Eric Mastro <eric.mastro@gmail.com>
* [contracts] fix typo
Co-authored-by: Eric Mastro <eric.mastro@gmail.com>
* [market] Use more generic error type
Should we decide to change the provider type later
Co-authored-by: Eric Mastro <eric.mastro@gmail.com>
Co-authored-by: Eric Mastro <eric.mastro@gmail.com>
Make RequestId, SlotId, Nonce, PurcahseId distinct types.
Add/modify conversions to support the distinct type (ABI encoding/decoding, JSON encoding, REST decoding).
Update tests
Tomasz Bekas
Ben Bierens
Adam Uhlíř
Eric
Jaremy Creechley
Eric Mastro
markspanbroek
Eric Mastro
Michael Bradley